1 files changed, 75 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/fsl,fman-port.yaml b/Documentation/devicetree/bindings/net/fsl,fman-port.yaml
new file mode 100644
index 000000000000..9de445307830
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,fman-port.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Frame Manager Port Device
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  The Frame Manager (FMan) supports several types of hardware ports:
+    Ethernet receiver (RX)
+    Ethernet transmitter (TX)
+    Offline/Host command (O/H)
+
+properties:
+  compatible:
+    enum:
+      - fsl,fman-v2-port-oh
+      - fsl,fman-v2-port-rx
+      - fsl,fman-v2-port-tx
+      - fsl,fman-v3-port-oh
+      - fsl,fman-v3-port-rx
+      - fsl,fman-v3-port-tx
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Specifies the hardware port id.
+      Each hardware port on the FMan has its own hardware PortID.
+      Super set of all hardware Port IDs available at FMan Reference
+      Manual under "FMan Hardware Ports in Freescale Devices" table.
+
+      Each hardware port is assigned a 4KB, port-specific page in
+      the FMan hardware port memory region (which is part of the
+      FMan memory map). The first 4 KB in the FMan hardware ports
+      memory region is used for what are called common registers.
+      The subsequent 63 4KB pages are allocated to the hardware
+      ports.
+      The page of a specific port is determined by the cell-index.
+
+  reg:
+    items:
+      - description: There is one reg region describing the port
+          configuration registers.
+
+  fsl,fman-10g-port:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: The default port rate is 1G.
+      If this property exists, the port is s 10G port.
+
+  fsl,fman-best-effort-port:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: The default port rate is 1G.
+      Can be defined only if 10G-support is set.
+      This property marks a best-effort 10G port (10G port that
+      may not be capable of line rate).
+
+required:
+  - compatible
+  - reg
+  - cell-index
+
+additionalProperties: false
+
+examples:
+  - |
+    port@a8000 {
+        compatible = "fsl,fman-v2-port-tx";
+        reg = <0xa8000 0x1000>;
+        cell-index = <0x28>;
+    };
+