1 files changed, 0 insertions, 144 deletions
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
deleted file mode 100644
index 60c54da4e526..000000000000
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ /dev/null
@@ -1,144 +0,0 @@
-* STMicroelectronics STM32 lcd-tft display controller
-
-- ltdc: lcd-tft display controller host
-  Required properties:
-  - compatible: "st,stm32-ltdc"
-  - reg: Physical base address of the IP registers and length of memory mapped region.
-  - clocks: A list of phandle + clock-specifier pairs, one for each
-    entry in 'clock-names'.
-  - clock-names: A list of clock names. For ltdc it should contain:
-      - "lcd" for the clock feeding the output pixel clock & IP clock.
-  - resets: reset to be used by the device (defined by use of RCC macro).
-  Required nodes:
-  - Video port for DPI RGB output: ltdc has one video port with up to 2
-    endpoints:
-      - for external dpi rgb panel or bridge, using gpios.
-      - for internal dpi input of the MIPI DSI host controller.
-      Note: These 2 endpoints cannot be activated simultaneously.
-
-* STMicroelectronics STM32 DSI controller specific extensions to Synopsys
-  DesignWare MIPI DSI host controller
-
-The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI
-DSI host controller. For all mandatory properties & nodes, please refer
-to the related documentation in [5].
-
-Mandatory properties specific to STM32 DSI:
-- #address-cells: Should be <1>.
-- #size-cells: Should be <0>.
-- compatible: "st,stm32-dsi".
-- clock-names:
-  - phy pll reference clock string name, must be "ref".
-- resets: see [5].
-- reset-names: see [5].
-
-Mandatory nodes specific to STM32 DSI:
-- ports: A node containing DSI input & output port nodes with endpoint
-  definitions as documented in [3] & [4].
-  - port@0: DSI input port node, connected to the ltdc rgb output port.
-  - port@1: DSI output port node, connected to a panel or a bridge input port.
-- panel or bridge node: A node containing the panel or bridge description as
-  documented in [6].
-  - port: panel or bridge port node, connected to the DSI output port (port@1).
-Optional properties:
-- phy-dsi-supply: phandle of the regulator that provides the supply voltage.
-
-Note: You can find more documentation in the following references
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/reset/reset.txt
-[3] Documentation/devicetree/bindings/media/video-interfaces.txt
-[4] Documentation/devicetree/bindings/graph.txt
-[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
-[6] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
-
-Example 1: RGB panel
-/ {
-	...
-	soc {
-	...
-		ltdc: display-controller@40016800 {
-			compatible = "st,stm32-ltdc";
-			reg = <0x40016800 0x200>;
-			interrupts = <88>, <89>;
-			resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
-			clocks = <&rcc 1 CLK_LCD>;
-			clock-names = "lcd";
-
-			port {
-				ltdc_out_rgb: endpoint {
-				};
-			};
-		};
-	};
-};
-
-Example 2: DSI panel
-
-/ {
-	...
-	soc {
-	...
-		ltdc: display-controller@40016800 {
-			compatible = "st,stm32-ltdc";
-			reg = <0x40016800 0x200>;
-			interrupts = <88>, <89>;
-			resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
-			clocks = <&rcc 1 CLK_LCD>;
-			clock-names = "lcd";
-
-			port {
-				ltdc_out_dsi: endpoint {
-					remote-endpoint = <&dsi_in>;
-				};
-			};
-		};
-
-
-		dsi: dsi@40016c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-dsi";
-			reg = <0x40016c00 0x800>;
-			clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
-			clock-names = "pclk", "ref";
-			resets = <&rcc STM32F4_APB2_RESET(DSI)>;
-			reset-names = "apb";
-			phy-dsi-supply = <&reg18>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					dsi_in: endpoint {
-						remote-endpoint = <&ltdc_out_dsi>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					dsi_out: endpoint {
-						remote-endpoint = <&dsi_in_panel>;
-					};
-				};
-
-			};
-
-			panel-dsi@0 {
-				reg = <0>; /* dsi virtual channel (0..3) */
-				compatible = ...;
-				enable-gpios = ...;
-
-				port {
-					dsi_in_panel: endpoint {
-						remote-endpoint = <&dsi_out>;
-					};
-				};
-
-			};
-
-		};
-
-	};
-};