diff options
Diffstat (limited to 'Documentation/PCI')
| -rw-r--r-- | Documentation/PCI/endpoint/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/PCI/endpoint/pci-test-function.rst (renamed from Documentation/PCI/endpoint/pci-test-function.txt) | 84 |
2 files changed, 51 insertions, 34 deletions
diff --git a/Documentation/PCI/endpoint/index.rst b/Documentation/PCI/endpoint/index.rst index 3951de9f923c..b680a3fc4fec 100644 --- a/Documentation/PCI/endpoint/index.rst +++ b/Documentation/PCI/endpoint/index.rst @@ -9,3 +9,4 @@ PCI Endpoint Framework pci-endpoint pci-endpoint-cfs + pci-test-function diff --git a/Documentation/PCI/endpoint/pci-test-function.txt b/Documentation/PCI/endpoint/pci-test-function.rst index 5916f1f592bb..3c8521d7aa31 100644 --- a/Documentation/PCI/endpoint/pci-test-function.txt +++ b/Documentation/PCI/endpoint/pci-test-function.rst @@ -1,5 +1,10 @@ - PCI TEST - Kishon Vijay Abraham I <kishon@ti.com> +.. SPDX-License-Identifier: GPL-2.0 + +================= +PCI Test Function +================= + +:Author: Kishon Vijay Abraham I <kishon@ti.com> Traditionally PCI RC has always been validated by using standard PCI cards like ethernet PCI cards or USB PCI cards or SATA PCI cards. @@ -23,65 +28,76 @@ The PCI endpoint test device has the following registers: 8) PCI_ENDPOINT_TEST_IRQ_TYPE 9) PCI_ENDPOINT_TEST_IRQ_NUMBER -*) PCI_ENDPOINT_TEST_MAGIC +* PCI_ENDPOINT_TEST_MAGIC This register will be used to test BAR0. A known pattern will be written and read back from MAGIC register to verify BAR0. -*) PCI_ENDPOINT_TEST_COMMAND: +* PCI_ENDPOINT_TEST_COMMAND This register will be used by the host driver to indicate the function that the endpoint device must perform. -Bitfield Description: - Bit 0 : raise legacy IRQ - Bit 1 : raise MSI IRQ - Bit 2 : raise MSI-X IRQ - Bit 3 : read command (read data from RC buffer) - Bit 4 : write command (write data to RC buffer) - Bit 5 : copy command (copy data from one RC buffer to another - RC buffer) +======== ================================================================ +Bitfield Description +======== ================================================================ +Bit 0 raise legacy IRQ +Bit 1 raise MSI IRQ +Bit 2 raise MSI-X IRQ +Bit 3 read command (read data from RC buffer) +Bit 4 write command (write data to RC buffer) +Bit 5 copy command (copy data from one RC buffer to another RC buffer) +======== ================================================================ -*) PCI_ENDPOINT_TEST_STATUS +* PCI_ENDPOINT_TEST_STATUS This register reflects the status of the PCI endpoint device. -Bitfield Description: - Bit 0 : read success - Bit 1 : read fail - Bit 2 : write success - Bit 3 : write fail - Bit 4 : copy success - Bit 5 : copy fail - Bit 6 : IRQ raised - Bit 7 : source address is invalid - Bit 8 : destination address is invalid - -*) PCI_ENDPOINT_TEST_SRC_ADDR +======== ============================== +Bitfield Description +======== ============================== +Bit 0 read success +Bit 1 read fail +Bit 2 write success +Bit 3 write fail +Bit 4 copy success +Bit 5 copy fail +Bit 6 IRQ raised +Bit 7 source address is invalid +Bit 8 destination address is invalid +======== ============================== + +* PCI_ENDPOINT_TEST_SRC_ADDR This register contains the source address (RC buffer address) for the COPY/READ command. -*) PCI_ENDPOINT_TEST_DST_ADDR +* PCI_ENDPOINT_TEST_DST_ADDR This register contains the destination address (RC buffer address) for the COPY/WRITE command. -*) PCI_ENDPOINT_TEST_IRQ_TYPE +* PCI_ENDPOINT_TEST_IRQ_TYPE This register contains the interrupt type (Legacy/MSI) triggered for the READ/WRITE/COPY and raise IRQ (Legacy/MSI) commands. Possible types: - - Legacy : 0 - - MSI : 1 - - MSI-X : 2 -*) PCI_ENDPOINT_TEST_IRQ_NUMBER +====== == +Legacy 0 +MSI 1 +MSI-X 2 +====== == + +* PCI_ENDPOINT_TEST_IRQ_NUMBER This register contains the triggered ID interrupt. Admissible values: - - Legacy : 0 - - MSI : [1 .. 32] - - MSI-X : [1 .. 2048] + +====== =========== +Legacy 0 +MSI [1 .. 32] +MSI-X [1 .. 2048] +====== =========== |