diff options
32 files changed, 1 insertions, 4250 deletions
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 21c9f304e96c..790352f93700 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -235,11 +235,6 @@ config PPC_EARLY_DEBUG_USBGECKO Select this to enable early debugging for Nintendo GameCube/Wii consoles via an external USB Gecko adapter. -config PPC_EARLY_DEBUG_WSP - bool "Early debugging via WSP's internal UART" - depends on PPC_WSP - select PPC_UDBG_16550 - config PPC_EARLY_DEBUG_PS3GELIC bool "Early debugging through the PS3 Ethernet port" depends on PPC_PS3 diff --git a/arch/powerpc/configs/chroma_defconfig b/arch/powerpc/configs/chroma_defconfig deleted file mode 100644 index 4f35fc462385..000000000000 --- a/arch/powerpc/configs/chroma_defconfig +++ /dev/null @@ -1,307 +0,0 @@ -CONFIG_PPC64=y -CONFIG_PPC_BOOK3E_64=y -# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set -CONFIG_SMP=y -CONFIG_NR_CPUS=256 -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=19 -CONFIG_CGROUPS=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CPUSETS=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_RESOURCE_COUNTERS=y -CONFIG_CGROUP_MEMCG=y -CONFIG_CGROUP_MEMCG_SWAP=y -CONFIG_NAMESPACES=y -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_INITRAMFS_COMPRESSION_GZIP=y -CONFIG_KALLSYMS_ALL=y -CONFIG_EMBEDDED=y -CONFIG_PERF_EVENTS=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_SCOM_DEBUGFS=y -CONFIG_PPC_A2_DD2=y -CONFIG_KVM_GUEST=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_HZ_100=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_BINFMT_MISC=y -CONFIG_NUMA=y -# CONFIG_MIGRATION is not set -CONFIG_PPC_64K_PAGES=y -CONFIG_SCHED_SMT=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="" -# CONFIG_SECCOMP is not set -CONFIG_PCIEPORTBUS=y -# CONFIG_PCIEASPM is not set -CONFIG_PCI_MSI=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_XFRM_SUB_POLICY=y -CONFIG_XFRM_STATISTICS=y -CONFIG_NET_KEY=m -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_NET_IPIP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_IPV6=y -CONFIG_IPV6_PRIVACY=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IPV6_OPTIMISTIC_DAD=y -CONFIG_INET6_AH=y -CONFIG_INET6_ESP=y -CONFIG_INET6_IPCOMP=y -CONFIG_IPV6_MIP6=y -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y -CONFIG_IPV6_TUNNEL=y -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_IPV6_MROUTE=y -CONFIG_IPV6_PIMSM_V2=y -CONFIG_NETFILTER=y -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_UDPLITE=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NET_TCPPROBE=y -# CONFIG_WIRELESS is not set -CONFIG_NET_9P=y -CONFIG_NET_9P_DEBUG=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_MTD=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_LE_BYTE_SWAP=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_PROC_DEVICETREE=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_CDROM_PKTCDVD=y -CONFIG_MISC_DEVICES=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SRP_ATTRS=y -CONFIG_ATA=y -CONFIG_SATA_AHCI=y -CONFIG_SATA_SIL24=y -CONFIG_SATA_MV=y -CONFIG_SATA_SIL=y -CONFIG_PATA_CMD64X=y -CONFIG_PATA_MARVELL=y -CONFIG_PATA_SIL680=y -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=y -CONFIG_DM_SNAPSHOT=y -CONFIG_DM_MIRROR=y -CONFIG_DM_ZERO=y -CONFIG_DM_UEVENT=y -CONFIG_NETDEVICES=y -CONFIG_TUN=y -CONFIG_E1000E=y -CONFIG_TIGON3=y -# CONFIG_WLAN is not set -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_DEVPTS_MULTIPLE_INSTANCES=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=1024 -# CONFIG_HWMON is not set -# CONFIG_VGA_ARB is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EDAC=y -CONFIG_EDAC_MM_EDAC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_DS1511=y -CONFIG_RTC_DRV_DS1553=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_EXT4_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_FUSE_FS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CONFIGFS_FS=m -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFS_V4_1=y -CONFIG_ROOT_NFS=y -CONFIG_CIFS=y -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_CRC_CCITT=m -CONFIG_CRC_T10DIF=y -CONFIG_LIBCRC32C=m -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_STRIP_ASM_SYMS=y -CONFIG_DETECT_HUNG_TASK=y -# CONFIG_SCHED_DEBUG is not set -CONFIG_DEBUG_INFO=y -CONFIG_FTRACE_SYSCALLS=y -CONFIG_PPC_EMULATED_STATS=y -CONFIG_XMON=y -CONFIG_XMON_DEFAULT=y -CONFIG_IRQ_DOMAIN_DEBUG=y -CONFIG_PPC_EARLY_DEBUG=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_LZO=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_VIRTUALIZATION=y diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 901dac6b6cb7..d0918e09557f 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -223,10 +223,6 @@ typedef struct { unsigned int id; unsigned int active; unsigned long vdso_base; -#ifdef CONFIG_PPC_ICSWX - struct spinlock *cop_lockp; /* guard cop related stuff */ - unsigned long acop; /* mask of enabled coprocessor types */ -#endif /* CONFIG_PPC_ICSWX */ #ifdef CONFIG_PPC_MM_SLICES u64 low_slices_psize; /* SLB page size encodings */ u64 high_slices_psize; /* 4 bits per slice for now */ diff --git a/arch/powerpc/include/asm/reg_a2.h b/arch/powerpc/include/asm/reg_a2.h index 3d52a1132f3d..3ba9c6f096fc 100644 --- a/arch/powerpc/include/asm/reg_a2.h +++ b/arch/powerpc/include/asm/reg_a2.h @@ -110,15 +110,6 @@ #define TLB1_UR ASM_CONST(0x0000000000000002) #define TLB1_SR ASM_CONST(0x0000000000000001) -#ifdef CONFIG_PPC_EARLY_DEBUG_WSP -#define WSP_UART_PHYS 0xffc000c000 -/* This needs to be careful chosen to hit a !0 congruence class - * in the TLB since we bolt it in way 3, which is already occupied - * by our linear mapping primary bolted entry in CC 0. - */ -#define WSP_UART_VIRT 0xf000000000001000 -#endif - /* A2 erativax attributes definitions */ #define ERATIVAX_RS_IS_ALL 0x000 #define ERATIVAX_RS_IS_TID 0x040 diff --git a/arch/powerpc/include/asm/wsp.h b/arch/powerpc/include/asm/wsp.h deleted file mode 100644 index c7dc83088a33..000000000000 --- a/arch/powerpc/include/asm/wsp.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright 2011 Michael Ellerman, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_POWERPC_WSP_H -#define __ASM_POWERPC_WSP_H - -extern int wsp_get_chip_id(struct device_node *dn); - -#endif /* __ASM_POWERPC_WSP_H */ diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index fab19ec25597..670c312d914e 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -43,7 +43,6 @@ obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power.o obj-$(CONFIG_PPC_BOOK3S_64) += mce.o mce_power.o obj64-$(CONFIG_RELOCATABLE) += reloc_64.o obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o -obj-$(CONFIG_PPC_A2) += cpu_setup_a2.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o obj-$(CONFIG_PPC_970_NAP) += idle_power4.o diff --git a/arch/powerpc/kernel/cpu_setup_a2.S b/arch/powerpc/kernel/cpu_setup_a2.S deleted file mode 100644 index 61f079e05b61..000000000000 --- a/arch/powerpc/kernel/cpu_setup_a2.S +++ /dev/null @@ -1,120 +0,0 @@ -/* - * A2 specific assembly support code - * - * Copyright 2009 Ben Herrenschmidt, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <asm/asm-offsets.h> -#include <asm/ppc_asm.h> -#include <asm/ppc-opcode.h> -#include <asm/processor.h> -#include <asm/reg_a2.h> -#include <asm/reg.h> -#include <asm/thread_info.h> - -/* - * Disable thdid and class fields in ERATs to bump PID to full 14 bits capacity. - * This also prevents external LPID accesses but that isn't a problem when not a - * guest. Under PV, this setting will be ignored and MMUCR will return the right - * number of PID bits we can use. - */ -#define MMUCR1_EXTEND_PID \ - (MMUCR1_ICTID | MMUCR1_ITTID | MMUCR1_DCTID | \ - MMUCR1_DTTID | MMUCR1_DCCD) - -/* - * Use extended PIDs if enabled. - * Don't clear the ERATs on context sync events and enable I & D LRU. - * Enable ERAT back invalidate when tlbwe overwrites an entry. - */ -#define INITIAL_MMUCR1 \ - (MMUCR1_EXTEND_PID | MMUCR1_CSINV_NEVER | MMUCR1_IRRE | \ - MMUCR1_DRRE | MMUCR1_TLBWE_BINV) - -_GLOBAL(__setup_cpu_a2) - /* Some of these are actually thread local and some are - * core local but doing it always won't hurt - */ - -#ifdef CONFIG_PPC_ICSWX - /* Make sure ACOP starts out as zero */ - li r3,0 - mtspr SPRN_ACOP,r3 - - /* Skip the following if we are in Guest mode */ - mfmsr r3 - andis. r0,r3,MSR_GS@h - bne _icswx_skip_guest - - /* Enable icswx instruction */ - mfspr r3,SPRN_A2_CCR2 - ori r3,r3,A2_CCR2_ENABLE_ICSWX - mtspr SPRN_A2_CCR2,r3 - - /* Unmask all CTs in HACOP */ - li r3,-1 - mtspr SPRN_HACOP,r3 -_icswx_skip_guest: -#endif /* CONFIG_PPC_ICSWX */ - - /* Enable doorbell */ - mfspr r3,SPRN_A2_CCR2 - oris r3,r3,A2_CCR2_ENABLE_PC@h - mtspr SPRN_A2_CCR2,r3 - isync - - /* Setup CCR0 to disable power saving for now as it's busted - * in the current implementations. Setup CCR1 to wake on - * interrupts normally (we write the default value but who - * knows what FW may have clobbered...) - */ - li r3,0 - mtspr SPRN_A2_CCR0, r3 - LOAD_REG_IMMEDIATE(r3,0x0f0f0f0f) - mtspr SPRN_A2_CCR1, r3 - - /* Initialise MMUCR1 */ - lis r3,INITIAL_MMUCR1@h - ori r3,r3,INITIAL_MMUCR1@l - mtspr SPRN_MMUCR1,r3 - - /* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */ - LOAD_REG_IMMEDIATE(r3, 0x000a7531) - mtspr SPRN_MMUCR2,r3 - - /* Set MMUCR3 to write all thids bit to the TLB */ - LOAD_REG_IMMEDIATE(r3, 0x0000000f) - mtspr SPRN_MMUCR3,r3 - - /* Don't do ERAT stuff if running guest mode */ - mfmsr r3 - andis. r0,r3,MSR_GS@h - bne 1f - - /* Now set the I-ERAT watermark to 15 */ - lis r4,(MMUCR0_TLBSEL_I|MMUCR0_ECL)@h - mtspr SPRN_MMUCR0, r4 - li r4,A2_IERAT_SIZE-1 - PPC_ERATWE(R4,R4,3) - - /* Now set the D-ERAT watermark to 31 */ - lis r4,(MMUCR0_TLBSEL_D|MMUCR0_ECL)@h - mtspr SPRN_MMUCR0, r4 - li r4,A2_DERAT_SIZE-1 - PPC_ERATWE(R4,R4,3) - - /* And invalidate the beast just in case. That won't get rid of - * a bolted entry though it will be in LRU and so will go away eventually - * but let's not bother for now - */ - PPC_ERATILX(0,0,R0) -1: - blr - -_GLOBAL(__restore_cpu_a2) - b __setup_cpu_a2 diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 11da04a4625a..965291b4c2fa 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -2149,44 +2149,6 @@ static struct cpu_spec __initdata cpu_specs[] = { } #endif /* CONFIG_PPC32 */ #endif /* CONFIG_E500 */ - -#ifdef CONFIG_PPC_A2 - { /* Standard A2 (>= DD2) + FPU core */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x00480000, - .cpu_name = "A2 (>= DD2)", - .cpu_features = CPU_FTRS_A2, - .cpu_user_features = COMMON_USER_PPC64, - .mmu_features = MMU_FTRS_A2, - .icache_bsize = 64, - .dcache_bsize = 64, - .num_pmcs = 0, - .cpu_setup = __setup_cpu_a2, - .cpu_restore = __restore_cpu_a2, - .machine_check = machine_check_generic, - .platform = "ppca2", - }, - { /* This is a default entry to get going, to be replaced by - * a real one at some stage - */ -#define CPU_FTRS_BASE_BOOK3E (CPU_FTR_USE_TB | \ - CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \ - CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE) - .pvr_mask = 0x00000000, - .pvr_value = 0x00000000, - .cpu_name = "Book3E", - .cpu_features = CPU_FTRS_BASE_BOOK3E, - .cpu_user_features = COMMON_USER_PPC64, - .mmu_features = MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX | - MMU_FTR_USE_TLBIVAX_BCAST | - MMU_FTR_LOCK_BCAST_INVAL, - .icache_bsize = 64, - .dcache_bsize = 64, - .num_pmcs = 0, - .machine_check = machine_check_generic, - .platform = "power6", - }, -#endif /* CONFIG_PPC_A2 */ }; static struct cpu_spec the_cpu_spec; diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index 771b4e92e5d9..bb9cac6c8051 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -1467,22 +1467,6 @@ a2_tlbinit_after_linear_map: .globl a2_tlbinit_after_iprot_flush a2_tlbinit_after_iprot_flush: -#ifdef CONFIG_PPC_EARLY_DEBUG_WSP - /* Now establish early debug mappings if applicable */ - /* Restore the MAS0 we used for linear mapping load */ - mtspr SPRN_MAS0,r11 - - lis r3,(MAS1_VALID | MAS1_IPROT)@h - ori r3,r3,(BOOK3E_PAGESZ_4K << MAS1_TSIZE_SHIFT) - mtspr SPRN_MAS1,r3 - LOAD_REG_IMMEDIATE(r3, WSP_UART_VIRT | MAS2_I | MAS2_G) - mtspr SPRN_MAS2,r3 - LOAD_REG_IMMEDIATE(r3, WSP_UART_PHYS | MAS3_SR | MAS3_SW) - mtspr SPRN_MAS7_MAS3,r3 - /* re-use the MAS8 value from the linear mapping */ - tlbwe -#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */ - PPC_TLBILX(0,0,R0) sync isync diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index a15837519dca..b7aa07279a63 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -62,8 +62,6 @@ void __init udbg_early_init(void) udbg_init_cpm(); #elif defined(CONFIG_PPC_EARLY_DEBUG_USBGECKO) udbg_init_usbgecko(); -#elif defined(CONFIG_PPC_EARLY_DEBUG_WSP) - udbg_init_wsp(); #elif defined(CONFIG_PPC_EARLY_DEBUG_MEMCONS) /* In memory console */ udbg_init_memcons(); diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 75702e207b29..6e7c4923b5ea 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -296,14 +296,3 @@ void __init udbg_init_40x_realmode(void) } #endif /* CONFIG_PPC_EARLY_DEBUG_40x */ - - -#ifdef CONFIG_PPC_EARLY_DEBUG_WSP - -void __init udbg_init_wsp(void) -{ - udbg_uart_init_mmio((void *)WSP_UART_VIRT, 1); - udbg_uart_setup(57600, 50000000); -} - -#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */ diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index bf9c6d4cd26c..391b3f6b54a3 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -19,7 +19,6 @@ source "arch/powerpc/platforms/embedded6xx/Kconfig" source "arch/powerpc/platforms/44x/Kconfig" source "arch/powerpc/platforms/40x/Kconfig" source "arch/powerpc/platforms/amigaone/Kconfig" -source "arch/powerpc/platforms/wsp/Kconfig" config KVM_GUEST bool "KVM Guest support" diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 43b65ad1970a..a41bd023647a 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -148,10 +148,6 @@ config POWER4 depends on PPC64 && PPC_BOOK3S def_bool y -config PPC_A2 - bool - depends on PPC_BOOK3E_64 - config TUNE_CELL bool "Optimize for Cell Broadband Engine" depends on PPC64 && PPC_BOOK3S @@ -280,7 +276,7 @@ config VSX config PPC_ICSWX bool "Support for PowerPC icswx coprocessor instruction" - depends on POWER4 || PPC_A2 + depends on POWER4 default n ---help--- diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 879b4a448498..469ef170d218 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -22,4 +22,3 @@ obj-$(CONFIG_PPC_CELL) += cell/ obj-$(CONFIG_PPC_PS3) += ps3/ obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/ obj-$(CONFIG_AMIGAONE) += amigaone/ -obj-$(CONFIG_PPC_WSP) += wsp/ diff --git a/arch/powerpc/platforms/wsp/Kconfig b/arch/powerpc/platforms/wsp/Kconfig deleted file mode 100644 index 422a175b10ee..000000000000 --- a/arch/powerpc/platforms/wsp/Kconfig +++ /dev/null @@ -1,30 +0,0 @@ -config PPC_WSP - bool - select PPC_A2 - select GENERIC_TBSYNC - select PPC_ICSWX - select PPC_SCOM - select PPC_XICS - select PPC_ICP_NATIVE - select PCI - select PPC_IO_WORKAROUNDS if PCI - select PPC_INDIRECT_PIO if PCI - default n - -menu "WSP platform selection" - depends on PPC_BOOK3E_64 - -config PPC_PSR2 - bool "PowerEN System Reference Platform 2" - select EPAPR_BOOT - select PPC_WSP - default y - -config PPC_CHROMA - bool "PowerEN PCIe Chroma Card" - select EPAPR_BOOT - select PPC_WSP - select OF_DYNAMIC - default y - -endmenu diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile deleted file mode 100644 index 162fc60125a2..000000000000 --- a/arch/powerpc/platforms/wsp/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -ccflags-y += $(NO_MINIMAL_TOC) - -obj-y += setup.o ics.o wsp.o -obj-$(CONFIG_PPC_PSR2) += psr2.o -obj-$(CONFIG_PPC_CHROMA) += chroma.o h8.o -obj-$(CONFIG_PPC_WSP) += opb_pic.o -obj-$(CONFIG_PPC_WSP) += scom_wsp.o -obj-$(CONFIG_SMP) += smp.o scom_smp.o -obj-$(CONFIG_PCI) += wsp_pci.o -obj-$(CONFIG_PCI_MSI) += msi.o diff --git a/arch/powerpc/platforms/wsp/chroma.c b/arch/powerpc/platforms/wsp/chroma.c deleted file mode 100644 index aaa46b353715..000000000000 --- a/arch/powerpc/platforms/wsp/chroma.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Copyright 2008-2011, IBM Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/of.h> -#include <linux/smp.h> -#include <linux/time.h> -#include <linux/of_fdt.h> - -#include <asm/machdep.h> -#include <asm/udbg.h> - -#include "ics.h" -#include "wsp.h" - -void __init chroma_setup_arch(void) -{ - wsp_setup_arch(); - wsp_setup_h8(); - -} - -static int __init chroma_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "ibm,wsp-chroma")) - return 0; - - return 1; -} - -define_machine(chroma_md) { - .name = "Chroma PCIe", - .probe = chroma_probe, - .setup_arch = chroma_setup_arch, - .restart = wsp_h8_restart, - .power_off = wsp_h8_power_off, - .halt = wsp_halt, - .calibrate_decr = generic_calibrate_decr, - .init_IRQ = wsp_setup_irq, - .progress = udbg_progress, - .power_save = book3e_idle, -}; - -machine_arch_initcall(chroma_md, wsp_probe_devices); diff --git a/arch/powerpc/platforms/wsp/h8.c b/arch/powerpc/platforms/wsp/h8.c deleted file mode 100644 index a3c87f395750..000000000000 --- a/arch/powerpc/platforms/wsp/h8.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Copyright 2008-2011, IBM Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/of.h> -#include <linux/io.h> -#include <linux/of_address.h> - -#include "wsp.h" - -/* - * The UART connection to the H8 is over ttyS1 which is just a 16550. - * We assume that FW has it setup right and no one messes with it. - */ - - -static u8 __iomem *h8; - -#define RBR 0 /* Receiver Buffer Register */ -#define THR 0 /* Transmitter Holding Register */ -#define LSR 5 /* Line Status Register */ -#define LSR_DR 0x01 /* LSR value for Data-Ready */ -#define LSR_THRE 0x20 /* LSR value for Transmitter-Holding-Register-Empty */ -static void wsp_h8_putc(int c) -{ - u8 lsr; - - do { - lsr = readb(h8 + LSR); - } while ((lsr & LSR_THRE) != LSR_THRE); - writeb(c, h8 + THR); -} - -static int wsp_h8_getc(void) -{ - u8 lsr; - - do { - lsr = readb(h8 + LSR); - } while ((lsr & LSR_DR) != LSR_DR); - - return readb(h8 + RBR); -} - -static void wsp_h8_puts(const char *s, int sz) -{ - int i; - - for (i = 0; i < sz; i++) { - wsp_h8_putc(s[i]); - - /* no flow control so wait for echo */ - wsp_h8_getc(); - } - wsp_h8_putc('\r'); - wsp_h8_putc('\n'); -} - -static void wsp_h8_terminal_cmd(const char *cmd, int sz) -{ - hard_irq_disable(); - wsp_h8_puts(cmd, sz); - /* should never return, but just in case */ - for (;;) - continue; -} - - -void wsp_h8_restart(char *cmd) -{ - static const char restart[] = "warm-reset"; - - (void)cmd; - wsp_h8_terminal_cmd(restart, sizeof(restart) - 1); -} - -void wsp_h8_power_off(void) -{ - static const char off[] = "power-off"; - - wsp_h8_terminal_cmd(off, sizeof(off) - 1); -} - -static void __iomem *wsp_h8_getaddr(void) -{ - struct device_node *aliases; - struct device_node *uart; - struct property *path; - void __iomem *va = NULL; - - /* - * there is nothing in the devtree to tell us which is mapped - * to the H8, but se know it is the second serial port. - */ - - aliases = of_find_node_by_path("/aliases"); - if (aliases == NULL) - return NULL; - - path = of_find_property(aliases, "serial1", NULL); - if (path == NULL) - goto out; - - uart = of_find_node_by_path(path->value); - if (uart == NULL) - goto out; - - va = of_iomap(uart, 0); - - /* remove it so no one messes with it */ - of_detach_node(uart); - of_node_put(uart); - -out: - of_node_put(aliases); - - return va; -} - -void __init wsp_setup_h8(void) -{ - h8 = wsp_h8_getaddr(); - - /* Devtree change? lets hard map it anyway */ - if (h8 == NULL) { - pr_warn("UART to H8 could not be found"); - h8 = ioremap(0xffc0008000ULL, 0x100); - } -} diff --git a/arch/powerpc/platforms/wsp/ics.c b/arch/powerpc/platforms/wsp/ics.c deleted file mode 100644 index 9cd92e645028..000000000000 --- a/arch/powerpc/platforms/wsp/ics.c +++ /dev/null @@ -1,762 +0,0 @@ -/* - * Copyright 2008-2011 IBM Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/cpu.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/msi.h> -#include <linux/of.h> -#include <linux/slab.h> -#include <linux/smp.h> -#include <linux/spinlock.h> -#include <linux/types.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/xics.h> - -#include "wsp.h" -#include "ics.h" - - -/* WSP ICS */ - -struct wsp_ics { - struct ics ics; - struct device_node *dn; - void __iomem *regs; - spinlock_t lock; - unsigned long *bitmap; - u32 chip_id; - u32 lsi_base; - u32 lsi_count; - u64 hwirq_start; - u64 count; -#ifdef CONFIG_SMP - int *hwirq_cpu_map; -#endif -}; - -#define to_wsp_ics(ics) container_of(ics, struct wsp_ics, ics) - -#define INT_SRC_LAYER_BUID_REG(base) ((base) + 0x00) -#define IODA_TBL_ADDR_REG(base) ((base) + 0x18) -#define IODA_TBL_DATA_REG(base) ((base) + 0x20) -#define XIVE_UPDATE_REG(base) ((base) + 0x28) -#define ICS_INT_CAPS_REG(base) ((base) + 0x30) - -#define TBL_AUTO_INCREMENT ((1UL << 63) | (1UL << 15)) -#define TBL_SELECT_XIST (1UL << 48) -#define TBL_SELECT_XIVT (1UL << 49) - -#define IODA_IRQ(irq) ((irq) & (0x7FFULL)) /* HRM 5.1.3.4 */ - -#define XIST_REQUIRED 0x8 -#define XIST_REJECTED 0x4 -#define XIST_PRESENTED 0x2 -#define XIST_PENDING 0x1 - -#define XIVE_SERVER_SHIFT 42 -#define XIVE_SERVER_MASK 0xFFFFULL -#define XIVE_PRIORITY_MASK 0xFFULL -#define XIVE_PRIORITY_SHIFT 32 -#define XIVE_WRITE_ENABLE (1ULL << 63) - -/* - * The docs refer to a 6 bit field called ChipID, which consists of a - * 3 bit NodeID and a 3 bit ChipID. On WSP the ChipID is always zero - * so we ignore it, and every where we use "chip id" in this code we - * mean the NodeID. - */ -#define WSP_ICS_CHIP_SHIFT 17 - - -static struct wsp_ics *ics_list; -static int num_ics; - -/* ICS Source controller accessors */ - -static u64 wsp_ics_get_xive(struct wsp_ics *ics, unsigned int irq) -{ - unsigned long flags; - u64 xive; - - spin_lock_irqsave(&ics->lock, flags); - out_be64(IODA_TBL_ADDR_REG(ics->regs), TBL_SELECT_XIVT | IODA_IRQ(irq)); - xive = in_be64(IODA_TBL_DATA_REG(ics->regs)); - spin_unlock_irqrestore(&ics->lock, flags); - - return xive; -} - -static void wsp_ics_set_xive(struct wsp_ics *ics, unsigned int irq, u64 xive) -{ - xive &= ~XIVE_ADDR_MASK; - xive |= (irq & XIVE_ADDR_MASK); - xive |= XIVE_WRITE_ENABLE; - - out_be64(XIVE_UPDATE_REG(ics->regs), xive); -} - -static u64 xive_set_server(u64 xive, unsigned int server) -{ - u64 mask = ~(XIVE_SERVER_MASK << XIVE_SERVER_SHIFT); - - xive &= mask; - xive |= (server & XIVE_SERVER_MASK) << XIVE_SERVER_SHIFT; - - return xive; -} - -static u64 xive_set_priority(u64 xive, unsigned int priority) -{ - u64 mask = ~(XIVE_PRIORITY_MASK << XIVE_PRIORITY_SHIFT); - - xive &= mask; - xive |= (priority & XIVE_PRIORITY_MASK) << XIVE_PRIORITY_SHIFT; - - return xive; -} - - -#ifdef CONFIG_SMP -/* Find logical CPUs within mask on a given chip and store result in ret */ -void cpus_on_chip(int chip_id, cpumask_t *mask, cpumask_t *ret) -{ - int cpu, chip; - struct device_node *cpu_dn, *dn; - const u32 *prop; - - cpumask_clear(ret); - for_each_cpu(cpu, mask) { - cpu_dn = of_get_cpu_node(cpu, NULL); - if (!cpu_dn) - continue; - - prop = of_get_property(cpu_dn, "at-node", NULL); - if (!prop) { - of_node_put(cpu_dn); - continue; - } - - dn = of_find_node_by_phandle(*prop); - of_node_put(cpu_dn); - - chip = wsp_get_chip_id(dn); - if (chip == chip_id) - cpumask_set_cpu(cpu, ret); - - of_node_put(dn); - } -} - -/* Store a suitable CPU to handle a hwirq in the ics->hwirq_cpu_map cache */ -static int cache_hwirq_map(struct wsp_ics *ics, unsigned int hwirq, - const cpumask_t *affinity) -{ - cpumask_var_t avail, newmask; - int ret = -ENOMEM, cpu, cpu_rover = 0, target; - int index = hwirq - ics->hwirq_start; - unsigned int nodeid; - - BUG_ON(index < 0 || index >= ics->count); - - if (!ics->hwirq_cpu_map) - return -ENOMEM; - - if (!distribute_irqs) { - ics->hwirq_cpu_map[hwirq - ics->hwirq_start] = xics_default_server; - return 0; - } - - /* Allocate needed CPU masks */ - if (!alloc_cpumask_var(&avail, GFP_KERNEL)) - goto ret; - if (!alloc_cpumask_var(&newmask, GFP_KERNEL)) - goto freeavail; - - /* Find PBus attached to the source of this IRQ */ - nodeid = (hwirq >> WSP_ICS_CHIP_SHIFT) & 0x3; /* 12:14 */ - - /* Find CPUs that could handle this IRQ */ - if (affinity) - cpumask_and(avail, cpu_online_mask, affinity); - else - cpumask_copy(avail, cpu_online_mask); - - /* Narrow selection down to logical CPUs on the same chip */ - cpus_on_chip(nodeid, avail, newmask); - - /* Ensure we haven't narrowed it down to 0 */ - if (unlikely(cpumask_empty(newmask))) { - if (unlikely(cpumask_empty(avail))) { - ret = -1; - goto out; - } - cpumask_copy(newmask, avail); - } - - /* Choose a CPU out of those we narrowed it down to in round robin */ - target = hwirq % cpumask_weight(newmask); - for_each_cpu(cpu, newmask) { - if (cpu_rover++ >= target) { - ics->hwirq_cpu_map[index] = get_hard_smp_processor_id(cpu); - ret = 0; - goto out; - } - } - - /* Shouldn't happen */ - WARN_ON(1); - -out: - free_cpumask_var(newmask); -freeavail: - free_cpumask_var(avail); -ret: - if (ret < 0) { - ics->hwirq_cpu_map[index] = cpumask_first(cpu_online_mask); - pr_warning("Error, falling hwirq 0x%x routing back to CPU %i\n", - hwirq, ics->hwirq_cpu_map[index]); - } - return ret; -} - -static void alloc_irq_map(struct wsp_ics *ics) -{ - int i; - - ics->hwirq_cpu_map = kmalloc(sizeof(int) * ics->count, GFP_KERNEL); - if (!ics->hwirq_cpu_map) { - pr_warning("Allocate hwirq_cpu_map failed, " - "IRQ balancing disabled\n"); - return; - } - - for (i=0; i < ics->count; i++) - ics->hwirq_cpu_map[i] = xics_default_server; -} - -static int get_irq_server(struct wsp_ics *ics, unsigned int hwirq) -{ - int index = hwirq - ics->hwirq_start; - - BUG_ON(index < 0 || index >= ics->count); - - if (!ics->hwirq_cpu_map) - return xics_default_server; - - return ics->hwirq_cpu_map[index]; -} -#else /* !CONFIG_SMP */ -static int cache_hwirq_map(struct wsp_ics *ics, unsigned int hwirq, - const cpumask_t *affinity) -{ - return 0; -} - -static int get_irq_server(struct wsp_ics *ics, unsigned int hwirq) -{ - return xics_default_server; -} - -static void alloc_irq_map(struct wsp_ics *ics) { } -#endif - -static void wsp_chip_unmask_irq(struct irq_data *d) -{ - unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d); - struct wsp_ics *ics; - int server; - u64 xive; - - if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS) - return; - - ics = d->chip_data; - if (WARN_ON(!ics)) - return; - - server = get_irq_server(ics, hw_irq); - - xive = wsp_ics_get_xive(ics, hw_irq); - xive = xive_set_server(xive, server); - xive = xive_set_priority(xive, DEFAULT_PRIORITY); - wsp_ics_set_xive(ics, hw_irq, xive); -} - -static unsigned int wsp_chip_startup(struct irq_data *d) -{ - /* unmask it */ - wsp_chip_unmask_irq(d); - return 0; -} - -static void wsp_mask_real_irq(unsigned int hw_irq, struct wsp_ics *ics) -{ - u64 xive; - - if (hw_irq == XICS_IPI) - return; - - if (WARN_ON(!ics)) - return; - xive = wsp_ics_get_xive(ics, hw_irq); - xive = xive_set_server(xive, xics_default_server); - xive = xive_set_priority(xive, LOWEST_PRIORITY); - wsp_ics_set_xive(ics, hw_irq, xive); -} - -static void wsp_chip_mask_irq(struct irq_data *d) -{ - unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d); - struct wsp_ics *ics = d->chip_data; - - if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS) - return; - - wsp_mask_real_irq(hw_irq, ics); -} - -static int wsp_chip_set_affinity(struct irq_data *d, - const struct cpumask *cpumask, bool force) -{ - unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d); - struct wsp_ics *ics; - int ret; - u64 xive; - - if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS) - return -1; - - ics = d->chip_data; - if (WARN_ON(!ics)) - return -1; - xive = wsp_ics_get_xive(ics, hw_irq); - - /* - * For the moment only implement delivery to all cpus or one cpu. - * Get current irq_server for the given irq - */ - ret = cache_hwirq_map(ics, hw_irq, cpumask); - if (ret == -1) { - char cpulist[128]; - cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask); - pr_warning("%s: No online cpus in the mask %s for irq %d\n", - __func__, cpulist, d->irq); - return -1; - } else if (ret == -ENOMEM) { - pr_warning("%s: Out of memory\n", __func__); - return -1; - } - - xive = xive_set_server(xive, get_irq_server(ics, hw_irq)); - wsp_ics_set_xive(ics, hw_irq, xive); - - return IRQ_SET_MASK_OK; -} - -static struct irq_chip wsp_irq_chip = { - .name = "WSP ICS", - .irq_startup = wsp_chip_startup, - .irq_mask = wsp_chip_mask_irq, - .irq_unmask = wsp_chip_unmask_irq, - .irq_set_affinity = wsp_chip_set_affinity -}; - -static int wsp_ics_host_match(struct ics *ics, struct device_node *dn) -{ - /* All ICSs in the system implement a global irq number space, - * so match against them all. */ - return of_device_is_compatible(dn, "ibm,ppc-xics"); -} - -static int wsp_ics_match_hwirq(struct wsp_ics *wsp_ics, unsigned int hwirq) -{ - if (hwirq >= wsp_ics->hwirq_start && - hwirq < wsp_ics->hwirq_start + wsp_ics->count) - return 1; - - return 0; -} - -static int wsp_ics_map(struct ics *ics, unsigned int virq) -{ - struct wsp_ics *wsp_ics = to_wsp_ics(ics); - unsigned int hw_irq = virq_to_hw(virq); - unsigned long flags; - - if (!wsp_ics_match_hwirq(wsp_ics, hw_irq)) - return -ENOENT; - - irq_set_chip_and_handler(virq, &wsp_irq_chip, handle_fasteoi_irq); - - irq_set_chip_data(virq, wsp_ics); - - spin_lock_irqsave(&wsp_ics->lock, flags); - bitmap_allocate_region(wsp_ics->bitmap, hw_irq - wsp_ics->hwirq_start, 0); - spin_unlock_irqrestore(&wsp_ics->lock, flags); - - return 0; -} - -static void wsp_ics_mask_unknown(struct ics *ics, unsigned long hw_irq) -{ - struct wsp_ics *wsp_ics = to_wsp_ics(ics); - - if (!wsp_ics_match_hwirq(wsp_ics, hw_irq)) - return; - - pr_err("%s: IRQ %lu (real) is invalid, disabling it.\n", __func__, hw_irq); - wsp_mask_real_irq(hw_irq, wsp_ics); -} - -static long wsp_ics_get_server(struct ics *ics, unsigned long hw_irq) -{ - struct wsp_ics *wsp_ics = to_wsp_ics(ics); - - if (!wsp_ics_match_hwirq(wsp_ics, hw_irq)) - return -ENOENT; - - return get_irq_server(wsp_ics, hw_irq); -} - -/* HW Number allocation API */ - -static struct wsp_ics *wsp_ics_find_dn_ics(struct device_node *dn) -{ - struct device_node *iparent; - int i; - - iparent = of_irq_find_parent(dn); - if (!iparent) { - pr_err("wsp_ics: Failed to find interrupt parent!\n"); - return NULL; - } - - for(i = 0; i < num_ics; i++) { - if(ics_list[i].dn == iparent) - break; - } - - if (i >= num_ics) { - pr_err("wsp_ics: Unable to find parent bitmap!\n"); - return NULL; - } - - return &ics_list[i]; -} - -int wsp_ics_alloc_irq(struct device_node *dn, int num) -{ - struct wsp_ics *ics; - int order, offset; - - ics = wsp_ics_find_dn_ics(dn); - if (!ics) - return -ENODEV; - - /* Fast, but overly strict if num isn't a power of two */ - order = get_count_order(num); - - spin_lock_irq(&ics->lock); - offset = bitmap_find_free_region(ics->bitmap, ics->count, order); - spin_unlock_irq(&ics->lock); - - if (offset < 0) - return offset; - - return offset + ics->hwirq_start; -} - -void wsp_ics_free_irq(struct device_node *dn, unsigned int irq) -{ - struct wsp_ics *ics; - - ics = wsp_ics_find_dn_ics(dn); - if (WARN_ON(!ics)) - return; - - spin_lock_irq(&ics->lock); - bitmap_release_region(ics->bitmap, irq, 0); - spin_unlock_irq(&ics->lock); -} - -/* Initialisation */ - -static int __init wsp_ics_bitmap_setup(struct wsp_ics *ics, - struct device_node *dn) -{ - int len, i, j, size; - u32 start, count; - const u32 *p; - - size = BITS_TO_LONGS(ics->count) * sizeof(long); - ics->bitmap = kzalloc(size, GFP_KERNEL); - if (!ics->bitmap) { - pr_err("wsp_ics: ENOMEM allocating IRQ bitmap!\n"); - return -ENOMEM; - } - - spin_lock_init(&ics->lock); - - p = of_get_property(dn, "available-ranges", &len); - if (!p || !len) { - /* FIXME this should be a WARN() once mambo is updated */ - pr_err("wsp_ics: No available-ranges defined for %s\n", - dn->full_name); - return 0; - } - - if (len % (2 * sizeof(u32)) != 0) { - /* FIXME this should be a WARN() once mambo is updated */ - pr_err("wsp_ics: Invalid available-ranges for %s\n", - dn->full_name); - return 0; - } - - bitmap_fill(ics->bitmap, ics->count); - - for (i = 0; i < len / sizeof(u32); i += 2) { - start = of_read_number(p + i, 1); - count = of_read_number(p + i + 1, 1); - - pr_devel("%s: start: %d count: %d\n", __func__, start, count); - - if ((start + count) > (ics->hwirq_start + ics->count) || - start < ics->hwirq_start) { - pr_err("wsp_ics: Invalid range! -> %d to %d\n", - start, start + count); - break; - } - - for (j = 0; j < count; j++) - bitmap_release_region(ics->bitmap, - (start + j) - ics->hwirq_start, 0); - } - - /* Ensure LSIs are not available for allocation */ - bitmap_allocate_region(ics->bitmap, ics->lsi_base, - get_count_order(ics->lsi_count)); - - return 0; -} - -static int __init wsp_ics_setup(struct wsp_ics *ics, struct device_node *dn) -{ - u32 lsi_buid, msi_buid, msi_base, msi_count; - void __iomem *regs; - const u32 *p; - int rc, len, i; - u64 caps, buid; - - p = of_get_property(dn, "interrupt-ranges", &len); - if (!p || len < (2 * sizeof(u32))) { - pr_err("wsp_ics: No/bad interrupt-ranges found on %s\n", - dn->full_name); - return -ENOENT; - } - - if (len > (2 * sizeof(u32))) { - pr_err("wsp_ics: Multiple ics ranges not supported.\n"); - return -EINVAL; - } - - regs = of_iomap(dn, 0); - if (!regs) { - pr_err("wsp_ics: of_iomap(%s) failed\n", dn->full_name); - return -ENXIO; - } - - ics->hwirq_start = of_read_number(p, 1); - ics->count = of_read_number(p + 1, 1); - ics->regs = regs; - - ics->chip_id = wsp_get_chip_id(dn); - if (WARN_ON(ics->chip_id < 0)) - ics->chip_id = 0; - - /* Get some informations about the critter */ - caps = in_be64(ICS_INT_CAPS_REG(ics->regs)); - buid = in_be64(INT_SRC_LAYER_BUID_REG(ics->regs)); - ics->lsi_count = caps >> 56; - msi_count = (caps >> 44) & 0x7ff; - - /* Note: LSI BUID is 9 bits, but really only 3 are BUID and the - * rest is mixed in the interrupt number. We store the whole - * thing though - */ - lsi_buid = (buid >> 48) & 0x1ff; - ics->lsi_base = (ics->chip_id << WSP_ICS_CHIP_SHIFT) | lsi_buid << 5; - msi_buid = (buid >> 37) & 0x7; - msi_base = (ics->chip_id << WSP_ICS_CHIP_SHIFT) | msi_buid << 11; - - pr_info("wsp_ics: Found %s\n", dn->full_name); - pr_info("wsp_ics: irq range : 0x%06llx..0x%06llx\n", - ics->hwirq_start, ics->hwirq_start + ics->count - 1); - pr_info("wsp_ics: %4d LSIs : 0x%06x..0x%06x\n", - ics->lsi_count, ics->lsi_base, - ics->lsi_base + ics->lsi_count - 1); - pr_info("wsp_ics: %4d MSIs : 0x%06x..0x%06x\n", - msi_count, msi_base, - msi_base + msi_count - 1); - - /* Let's check the HW config is sane */ - if (ics->lsi_base < ics->hwirq_start || - (ics->lsi_base + ics->lsi_count) > (ics->hwirq_start + ics->count)) - pr_warning("wsp_ics: WARNING ! LSIs out of interrupt-ranges !\n"); - if (msi_base < ics->hwirq_start || - (msi_base + msi_count) > (ics->hwirq_start + ics->count)) - pr_warning("wsp_ics: WARNING ! MSIs out of interrupt-ranges !\n"); - - /* We don't check for overlap between LSI and MSI, which will happen - * if we use the same BUID, I'm not sure yet how legit that is. - */ - - rc = wsp_ics_bitmap_setup(ics, dn); - if (rc) { - iounmap(regs); - return rc; - } - - ics->dn = of_node_get(dn); - alloc_irq_map(ics); - - for(i = 0; i < ics->count; i++) - wsp_mask_real_irq(ics->hwirq_start + i, ics); - - ics->ics.map = wsp_ics_map; - ics->ics.mask_unknown = wsp_ics_mask_unknown; - ics->ics.get_server = wsp_ics_get_server; - ics->ics.host_match = wsp_ics_host_match; - - xics_register_ics(&ics->ics); - - return 0; -} - -static void __init wsp_ics_set_default_server(void) -{ - struct device_node *np; - u32 hwid; - - /* Find the server number for the boot cpu. */ - np = of_get_cpu_node(boot_cpuid, NULL); - BUG_ON(!np); - - hwid = get_hard_smp_processor_id(boot_cpuid); - - pr_info("wsp_ics: default server is %#x, CPU %s\n", hwid, np->full_name); - xics_default_server = hwid; - - of_node_put(np); -} - -static int __init wsp_ics_init(void) -{ - struct device_node *dn; - struct wsp_ics *ics; - int rc, found; - - wsp_ics_set_default_server(); - - found = 0; - for_each_compatible_node(dn, NULL, "ibm,ppc-xics") - found++; - - if (found == 0) { - pr_err("wsp_ics: No ICS's found!\n"); - return -ENODEV; - } - - ics_list = kmalloc(sizeof(*ics) * found, GFP_KERNEL); - if (!ics_list) { - pr_err("wsp_ics: No memory for structs.\n"); - return -ENOMEM; - } - - num_ics = 0; - ics = ics_list; - for_each_compatible_node(dn, NULL, "ibm,wsp-xics") { - rc = wsp_ics_setup(ics, dn); - if (rc == 0) { - ics++; - num_ics++; - } - } - - if (found != num_ics) { - pr_err("wsp_ics: Failed setting up %d ICS's\n", - found - num_ics); - return -1; - } - - return 0; -} - -void __init wsp_init_irq(void) -{ - wsp_ics_init(); - xics_init(); - - /* We need to patch our irq chip's EOI to point to the right ICP */ - wsp_irq_chip.irq_eoi = icp_ops->eoi; -} - -#ifdef CONFIG_PCI_MSI -static void wsp_ics_msi_unmask_irq(struct irq_data *d) -{ - wsp_chip_unmask_irq(d); - unmask_msi_irq(d); -} - -static unsigned int wsp_ics_msi_startup(struct irq_data *d) -{ - wsp_ics_msi_unmask_irq(d); - return 0; -} - -static void wsp_ics_msi_mask_irq(struct irq_data *d) -{ - mask_msi_irq(d); - wsp_chip_mask_irq(d); -} - -/* - * we do it this way because we reassinge default EOI handling in - * irq_init() above - */ -static void wsp_ics_eoi(struct irq_data *data) -{ - wsp_irq_chip.irq_eoi(data); -} - -static struct irq_chip wsp_ics_msi = { - .name = "WSP ICS MSI", - .irq_startup = wsp_ics_msi_startup, - .irq_mask = wsp_ics_msi_mask_irq, - .irq_unmask = wsp_ics_msi_unmask_irq, - .irq_eoi = wsp_ics_eoi, - .irq_set_affinity = wsp_chip_set_affinity -}; - -void wsp_ics_set_msi_chip(unsigned int irq) -{ - irq_set_chip(irq, &wsp_ics_msi); -} - -void wsp_ics_set_std_chip(unsigned int irq) -{ - irq_set_chip(irq, &wsp_irq_chip); -} -#endif /* CONFIG_PCI_MSI */ diff --git a/arch/powerpc/platforms/wsp/ics.h b/arch/powerpc/platforms/wsp/ics.h deleted file mode 100644 index 07b644e0cf97..000000000000 --- a/arch/powerpc/platforms/wsp/ics.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright 2009 IBM Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __ICS_H -#define __ICS_H - -#define XIVE_ADDR_MASK 0x7FFULL - -extern void wsp_init_irq(void); - -extern int wsp_ics_alloc_irq(struct device_node *dn, int num); -extern void wsp_ics_free_irq(struct device_node *dn, unsigned int irq); - -#ifdef CONFIG_PCI_MSI -extern void wsp_ics_set_msi_chip(unsigned int irq); -extern void wsp_ics_set_std_chip(unsigned int irq); -#endif /* CONFIG_PCI_MSI */ - -#endif /* __ICS_H */ diff --git a/arch/powerpc/platforms/wsp/msi.c b/arch/powerpc/platforms/wsp/msi.c deleted file mode 100644 index 380882f27add..000000000000 --- a/arch/powerpc/platforms/wsp/msi.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Copyright 2011 Michael Ellerman, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/msi.h> -#include <linux/irq.h> -#include <linux/interrupt.h> - -#include "msi.h" -#include "ics.h" -#include "wsp_pci.h" - -/* Magic addresses for 32 & 64-bit MSIs with hardcoded MVE 0 */ -#define MSI_ADDR_32 0xFFFF0000ul -#define MSI_ADDR_64 0x1000000000000000ul - -int wsp_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) -{ - struct pci_controller *phb; - struct msi_desc *entry; - struct msi_msg msg; - unsigned int virq; - int hwirq; - - phb = pci_bus_to_host(dev->bus); - if (!phb) - return -ENOENT; - - entry = list_first_entry(&dev->msi_list, struct msi_desc, list); - if (entry->msi_attrib.is_64) { - msg.address_lo = 0; - msg.address_hi = MSI_ADDR_64 >> 32; - } else { - msg.address_lo = MSI_ADDR_32; - msg.address_hi = 0; - } - - list_for_each_entry(entry, &dev->msi_list, list) { - hwirq = wsp_ics_alloc_irq(phb->dn, 1); - if (hwirq < 0) { - dev_warn(&dev->dev, "wsp_msi: hwirq alloc failed!\n"); - return hwirq; - } - - virq = irq_create_mapping(NULL, hwirq); - if (virq == NO_IRQ) { - dev_warn(&dev->dev, "wsp_msi: virq alloc failed!\n"); - return -1; - } - - dev_dbg(&dev->dev, "wsp_msi: allocated irq %#x/%#x\n", - hwirq, virq); - - wsp_ics_set_msi_chip(virq); - irq_set_msi_desc(virq, entry); - msg.data = hwirq & XIVE_ADDR_MASK; - write_msi_msg(virq, &msg); - } - - return 0; -} - -void wsp_teardown_msi_irqs(struct pci_dev *dev) -{ - struct pci_controller *phb; - struct msi_desc *entry; - int hwirq; - - phb = pci_bus_to_host(dev->bus); - - dev_dbg(&dev->dev, "wsp_msi: tearing down msi irqs\n"); - - list_for_each_entry(entry, &dev->msi_list, list) { - if (entry->irq == NO_IRQ) - continue; - - irq_set_msi_desc(entry->irq, NULL); - wsp_ics_set_std_chip(entry->irq); - - hwirq = virq_to_hw(entry->irq); - /* In this order to avoid racing with irq_create_mapping() */ - irq_dispose_mapping(entry->irq); - wsp_ics_free_irq(phb->dn, hwirq); - } -} - -void wsp_setup_phb_msi(struct pci_controller *phb) -{ - /* Create a single MVE at offset 0 that matches everything */ - out_be64(phb->cfg_data + PCIE_REG_IODA_ADDR, PCIE_REG_IODA_AD_TBL_MVT); - out_be64(phb->cfg_data + PCIE_REG_IODA_DATA0, 1ull << 63); - - ppc_md.setup_msi_irqs = wsp_setup_msi_irqs; - ppc_md.teardown_msi_irqs = wsp_teardown_msi_irqs; -} diff --git a/arch/powerpc/platforms/wsp/msi.h b/arch/powerpc/platforms/wsp/msi.h deleted file mode 100644 index 0ab27b71b24d..000000000000 --- a/arch/powerpc/platforms/wsp/msi.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright 2011 Michael Ellerman, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __WSP_MSI_H -#define __WSP_MSI_H - -#ifdef CONFIG_PCI_MSI -extern void wsp_setup_phb_msi(struct pci_controller *phb); -#else -static inline void wsp_setup_phb_msi(struct pci_controller *phb) { } -#endif - -#endif /* __WSP_MSI_H */ diff --git a/arch/powerpc/platforms/wsp/opb_pic.c b/arch/powerpc/platforms/wsp/opb_pic.c deleted file mode 100644 index 3f6729807938..000000000000 --- a/arch/powerpc/platforms/wsp/opb_pic.c +++ /dev/null @@ -1,321 +0,0 @@ -/* - * IBM Onboard Peripheral Bus Interrupt Controller - * - * Copyright 2010 Jack Miller, IBM Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/of.h> -#include <linux/slab.h> -#include <linux/time.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include <asm/reg_a2.h> -#include <asm/irq.h> - -#define OPB_NR_IRQS 32 - -#define OPB_MLSASIER 0x04 /* MLS Accumulated Status IER */ -#define OPB_MLSIR 0x50 /* MLS Interrupt Register */ -#define OPB_MLSIER 0x54 /* MLS Interrupt Enable Register */ -#define OPB_MLSIPR 0x58 /* MLS Interrupt Polarity Register */ -#define OPB_MLSIIR 0x5c /* MLS Interrupt Inputs Register */ - -static int opb_index = 0; - -struct opb_pic { - struct irq_domain *host; - void *regs; - int index; - spinlock_t lock; -}; - -static u32 opb_in(struct opb_pic *opb, int offset) -{ - return in_be32(opb->regs + offset); -} - -static void opb_out(struct opb_pic *opb, int offset, u32 val) -{ - out_be32(opb->regs + offset, val); -} - -static void opb_unmask_irq(struct irq_data *d) -{ - struct opb_pic *opb; - unsigned long flags; - u32 ier, bitset; - - opb = d->chip_data; - bitset = (1 << (31 - irqd_to_hwirq(d))); - - spin_lock_irqsave(&opb->lock, flags); - - ier = opb_in(opb, OPB_MLSIER); - opb_out(opb, OPB_MLSIER, ier | bitset); - ier = opb_in(opb, OPB_MLSIER); - - spin_unlock_irqrestore(&opb->lock, flags); -} - -static void opb_mask_irq(struct irq_data *d) -{ - struct opb_pic *opb; - unsigned long flags; - u32 ier, mask; - - opb = d->chip_data; - mask = ~(1 << (31 - irqd_to_hwirq(d))); - - spin_lock_irqsave(&opb->lock, flags); - - ier = opb_in(opb, OPB_MLSIER); - opb_out(opb, OPB_MLSIER, ier & mask); - ier = opb_in(opb, OPB_MLSIER); // Flush posted writes - - spin_unlock_irqrestore(&opb->lock, flags); -} - -static void opb_ack_irq(struct irq_data *d) -{ - struct opb_pic *opb; - unsigned long flags; - u32 bitset; - - opb = d->chip_data; - bitset = (1 << (31 - irqd_to_hwirq(d))); - - spin_lock_irqsave(&opb->lock, flags); - - opb_out(opb, OPB_MLSIR, bitset); - opb_in(opb, OPB_MLSIR); // Flush posted writes - - spin_unlock_irqrestore(&opb->lock, flags); -} - -static void opb_mask_ack_irq(struct irq_data *d) -{ - struct opb_pic *opb; - unsigned long flags; - u32 bitset; - u32 ier, ir; - - opb = d->chip_data; - bitset = (1 << (31 - irqd_to_hwirq(d))); - - spin_lock_irqsave(&opb->lock, flags); - - ier = opb_in(opb, OPB_MLSIER); - opb_out(opb, OPB_MLSIER, ier & ~bitset); - ier = opb_in(opb, OPB_MLSIER); // Flush posted writes - - opb_out(opb, OPB_MLSIR, bitset); - ir = opb_in(opb, OPB_MLSIR); // Flush posted writes - - spin_unlock_irqrestore(&opb->lock, flags); -} - -static int opb_set_irq_type(struct irq_data *d, unsigned int flow) -{ - struct opb_pic *opb; - unsigned long flags; - int invert, ipr, mask, bit; - - opb = d->chip_data; - - /* The only information we're interested in in the type is whether it's - * a high or low trigger. For high triggered interrupts, the polarity - * set for it in the MLS Interrupt Polarity Register is 0, for low - * interrupts it's 1 so that the proper input in the MLS Interrupt Input - * Register is interrupted as asserting the interrupt. */ - - switch (flow) { - case IRQ_TYPE_NONE: - opb_mask_irq(d); - return 0; - - case IRQ_TYPE_LEVEL_HIGH: - invert = 0; - break; - - case IRQ_TYPE_LEVEL_LOW: - invert = 1; - break; - - default: - return -EINVAL; - } - - bit = (1 << (31 - irqd_to_hwirq(d))); - mask = ~bit; - - spin_lock_irqsave(&opb->lock, flags); - - ipr = opb_in(opb, OPB_MLSIPR); - ipr = (ipr & mask) | (invert ? bit : 0); - opb_out(opb, OPB_MLSIPR, ipr); - ipr = opb_in(opb, OPB_MLSIPR); // Flush posted writes - - spin_unlock_irqrestore(&opb->lock, flags); - - /* Record the type in the interrupt descriptor */ - irqd_set_trigger_type(d, flow); - - return 0; -} - -static struct irq_chip opb_irq_chip = { - .name = "OPB", - .irq_mask = opb_mask_irq, - .irq_unmask = opb_unmask_irq, - .irq_mask_ack = opb_mask_ack_irq, - .irq_ack = opb_ack_irq, - .irq_set_type = opb_set_irq_type -}; - -static int opb_host_map(struct irq_domain *host, unsigned int virq, - irq_hw_number_t hwirq) -{ - struct opb_pic *opb; - - opb = host->host_data; - - /* Most of the important stuff is handled by the generic host code, like - * the lookup, so just attach some info to the virtual irq */ - - irq_set_chip_data(virq, opb); - irq_set_chip_and_handler(virq, &opb_irq_chip, handle_level_irq); - irq_set_irq_type(virq, IRQ_TYPE_NONE); - - return 0; -} - -static const struct irq_domain_ops opb_host_ops = { - .map = opb_host_map, - .xlate = irq_domain_xlate_twocell, -}; - -irqreturn_t opb_irq_handler(int irq, void *private) -{ - struct opb_pic *opb; - u32 ir, src, subvirq; - - opb = (struct opb_pic *) private; - - /* Read the OPB MLS Interrupt Register for - * asserted interrupts */ - ir = opb_in(opb, OPB_MLSIR); - if (!ir) - return IRQ_NONE; - - do { - /* Get 1 - 32 source, *NOT* bit */ - src = 32 - ffs(ir); - - /* Translate from the OPB's conception of interrupt number to - * Linux's virtual IRQ */ - - subvirq = irq_linear_revmap(opb->host, src); - - generic_handle_irq(subvirq); - } while ((ir = opb_in(opb, OPB_MLSIR))); - - return IRQ_HANDLED; -} - -struct opb_pic *opb_pic_init_one(struct device_node *dn) -{ - struct opb_pic *opb; - struct resource res; - - if (of_address_to_resource(dn, 0, &res)) { - printk(KERN_ERR "opb: Couldn't translate resource\n"); - return NULL; - } - - opb = kzalloc(sizeof(struct opb_pic), GFP_KERNEL); - if (!opb) { - printk(KERN_ERR "opb: Failed to allocate opb struct!\n"); - return NULL; - } - - /* Get access to the OPB MMIO registers */ - opb->regs = ioremap(res.start + 0x10000, 0x1000); - if (!opb->regs) { - printk(KERN_ERR "opb: Failed to allocate register space!\n"); - goto free_opb; - } - - /* Allocate an irq domain so that Linux knows that despite only - * having one interrupt to issue, we're the controller for multiple - * hardware IRQs, so later we can lookup their virtual IRQs. */ - - opb->host = irq_domain_add_linear(dn, OPB_NR_IRQS, &opb_host_ops, opb); - if (!opb->host) { - printk(KERN_ERR "opb: Failed to allocate IRQ host!\n"); - goto free_regs; - } - - opb->index = opb_index++; - spin_lock_init(&opb->lock); - - /* Disable all interrupts by default */ - opb_out(opb, OPB_MLSASIER, 0); - opb_out(opb, OPB_MLSIER, 0); - - /* ACK any interrupts left by FW */ - opb_out(opb, OPB_MLSIR, 0xFFFFFFFF); - - return opb; - -free_regs: - iounmap(opb->regs); -free_opb: - kfree(opb); - return NULL; -} - -void __init opb_pic_init(void) -{ - struct device_node *dn; - struct opb_pic *opb; - int virq; - int rc; - - /* Call init_one for each OPB device */ - for_each_compatible_node(dn, NULL, "ibm,opb") { - - /* Fill in an OPB struct */ - opb = opb_pic_init_one(dn); - if (!opb) { - printk(KERN_WARNING "opb: Failed to init node, skipped!\n"); - continue; - } - - /* Map / get opb's hardware virtual irq */ - virq = irq_of_parse_and_map(dn, 0); - if (virq <= 0) { - printk("opb: irq_op_parse_and_map failed!\n"); - continue; - } - - /* Attach opb interrupt handler to new virtual IRQ */ - rc = request_irq(virq, opb_irq_handler, IRQF_NO_THREAD, - "OPB LS Cascade", opb); - if (rc) { - printk("opb: request_irq failed: %d\n", rc); - continue; - } - - printk("OPB%d init with %d IRQs at %p\n", opb->index, - OPB_NR_IRQS, opb->regs); - } -} diff --git a/arch/powerpc/platforms/wsp/psr2.c b/arch/powerpc/platforms/wsp/psr2.c deleted file mode 100644 index a87b414c766a..000000000000 --- a/arch/powerpc/platforms/wsp/psr2.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright 2008-2011, IBM Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/of.h> -#include <linux/smp.h> -#include <linux/time.h> -#include <linux/of_fdt.h> - -#include <asm/machdep.h> -#include <asm/udbg.h> - -#include "ics.h" -#include "wsp.h" - - -static void psr2_spin(void) -{ - hard_irq_disable(); - for (;;) - continue; -} - -static void psr2_restart(char *cmd) -{ - psr2_spin(); -} - -static int __init psr2_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (of_flat_dt_is_compatible(root, "ibm,wsp-chroma")) { - /* chroma systems also claim they are psr2s */ - return 0; - } - - if (!of_flat_dt_is_compatible(root, "ibm,psr2")) - return 0; - - return 1; -} - -define_machine(psr2_md) { - .name = "PSR2 A2", - .probe = psr2_probe, - .setup_arch = wsp_setup_arch, - .restart = psr2_restart, - .power_off = psr2_spin, - .halt = psr2_spin, - .calibrate_decr = generic_calibrate_decr, - .init_IRQ = wsp_setup_irq, - .progress = udbg_progress, - .power_save = book3e_idle, -}; - -machine_arch_initcall(psr2_md, wsp_probe_devices); diff --git a/arch/powerpc/platforms/wsp/scom_smp.c b/arch/powerpc/platforms/wsp/scom_smp.c deleted file mode 100644 index 8c79ce016cf1..000000000000 --- a/arch/powerpc/platforms/wsp/scom_smp.c +++ /dev/null @@ -1,435 +0,0 @@ -/* - * SCOM support for A2 platforms - * - * Copyright 2007-2011 Benjamin Herrenschmidt, David Gibson, - * Michael Ellerman, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/cpumask.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/spinlock.h> -#include <linux/types.h> - -#include <asm/cputhreads.h> -#include <asm/reg_a2.h> -#include <asm/scom.h> -#include <asm/udbg.h> -#include <asm/code-patching.h> - -#include "wsp.h" - -#define SCOM_RAMC 0x2a /* Ram Command */ -#define SCOM_RAMC_TGT1_EXT 0x80000000 -#define SCOM_RAMC_SRC1_EXT 0x40000000 -#define SCOM_RAMC_SRC2_EXT 0x20000000 -#define SCOM_RAMC_SRC3_EXT 0x10000000 -#define SCOM_RAMC_ENABLE 0x00080000 -#define SCOM_RAMC_THREADSEL 0x00060000 -#define SCOM_RAMC_EXECUTE 0x00010000 -#define SCOM_RAMC_MSR_OVERRIDE 0x00008000 -#define SCOM_RAMC_MSR_PR 0x00004000 -#define SCOM_RAMC_MSR_GS 0x00002000 -#define SCOM_RAMC_FORCE 0x00001000 -#define SCOM_RAMC_FLUSH 0x00000800 -#define SCOM_RAMC_INTERRUPT 0x00000004 -#define SCOM_RAMC_ERROR 0x00000002 -#define SCOM_RAMC_DONE 0x00000001 -#define SCOM_RAMI 0x29 /* Ram Instruction */ -#define SCOM_RAMIC 0x28 /* Ram Instruction and Command */ -#define SCOM_RAMIC_INSN 0xffffffff00000000 -#define SCOM_RAMD 0x2d /* Ram Data */ -#define SCOM_RAMDH 0x2e /* Ram Data High */ -#define SCOM_RAMDL 0x2f /* Ram Data Low */ -#define SCOM_PCCR0 0x33 /* PC Configuration Register 0 */ -#define SCOM_PCCR0_ENABLE_DEBUG 0x80000000 -#define SCOM_PCCR0_ENABLE_RAM 0x40000000 -#define SCOM_THRCTL 0x30 /* Thread Control and Status */ -#define SCOM_THRCTL_T0_STOP 0x80000000 -#define SCOM_THRCTL_T1_STOP 0x40000000 -#define SCOM_THRCTL_T2_STOP 0x20000000 -#define SCOM_THRCTL_T3_STOP 0x10000000 -#define SCOM_THRCTL_T0_STEP 0x08000000 -#define SCOM_THRCTL_T1_STEP 0x04000000 -#define SCOM_THRCTL_T2_STEP 0x02000000 -#define SCOM_THRCTL_T3_STEP 0x01000000 -#define SCOM_THRCTL_T0_RUN 0x00800000 -#define SCOM_THRCTL_T1_RUN 0x00400000 -#define SCOM_THRCTL_T2_RUN 0x00200000 -#define SCOM_THRCTL_T3_RUN 0x00100000 -#define SCOM_THRCTL_T0_PM 0x00080000 -#define SCOM_THRCTL_T1_PM 0x00040000 -#define SCOM_THRCTL_T2_PM 0x00020000 -#define SCOM_THRCTL_T3_PM 0x00010000 -#define SCOM_THRCTL_T0_UDE 0x00008000 -#define SCOM_THRCTL_T1_UDE 0x00004000 -#define SCOM_THRCTL_T2_UDE 0x00002000 -#define SCOM_THRCTL_T3_UDE 0x00001000 -#define SCOM_THRCTL_ASYNC_DIS 0x00000800 -#define SCOM_THRCTL_TB_DIS 0x00000400 -#define SCOM_THRCTL_DEC_DIS 0x00000200 -#define SCOM_THRCTL_AND 0x31 /* Thread Control and Status */ -#define SCOM_THRCTL_OR 0x32 /* Thread Control and Status */ - - -static DEFINE_PER_CPU(scom_map_t, scom_ptrs); - -static scom_map_t get_scom(int cpu, struct device_node *np, int *first_thread) -{ - scom_map_t scom = per_cpu(scom_ptrs, cpu); - int tcpu; - - if (scom_map_ok(scom)) { - *first_thread = 0; - return scom; - } - - *first_thread = 1; - - scom = scom_map_device(np, 0); - - for (tcpu = cpu_first_thread_sibling(cpu); - tcpu <= cpu_last_thread_sibling(cpu); tcpu++) - per_cpu(scom_ptrs, tcpu) = scom; - - /* Hack: for the boot core, this will actually get called on - * the second thread up, not the first so our test above will - * set first_thread incorrectly. */ - if (cpu_first_thread_sibling(cpu) == 0) - *first_thread = 0; - - return scom; -} - -static int a2_scom_ram(scom_map_t scom, int thread, u32 insn, int extmask) -{ - u64 cmd, mask, val; - int n = 0; - - cmd = ((u64)insn << 32) | (((u64)extmask & 0xf) << 28) - | ((u64)thread << 17) | SCOM_RAMC_ENABLE | SCOM_RAMC_EXECUTE; - mask = SCOM_RAMC_DONE | SCOM_RAMC_INTERRUPT | SCOM_RAMC_ERROR; - - scom_write(scom, SCOM_RAMIC, cmd); - - for (;;) { - if (scom_read(scom, SCOM_RAMC, &val) != 0) { - pr_err("SCOM error on instruction 0x%08x, thread %d\n", - insn, thread); - return -1; - } - if (val & mask) - break; - pr_devel("Waiting on RAMC = 0x%llx\n", val); - if (++n == 3) { - pr_err("RAMC timeout on instruction 0x%08x, thread %d\n", - insn, thread); - return -1; - } - } - - if (val & SCOM_RAMC_INTERRUPT) { - pr_err("RAMC interrupt on instruction 0x%08x, thread %d\n", - insn, thread); - return -SCOM_RAMC_INTERRUPT; - } - - if (val & SCOM_RAMC_ERROR) { - pr_err("RAMC error on instruction 0x%08x, thread %d\n", - insn, thread); - return -SCOM_RAMC_ERROR; - } - - return 0; -} - -static int a2_scom_getgpr(scom_map_t scom, int thread, int gpr, int alt, - u64 *out_gpr) -{ - int rc; - - /* or rN, rN, rN */ - u32 insn = 0x7c000378 | (gpr << 21) | (gpr << 16) | (gpr << 11); - rc = a2_scom_ram(scom, thread, insn, alt ? 0xf : 0x0); - if (rc) - return rc; - - return scom_read(scom, SCOM_RAMD, out_gpr); -} - -static int a2_scom_getspr(scom_map_t scom, int thread, int spr, u64 *out_spr) -{ - int rc, sprhi, sprlo; - u32 insn; - - sprhi = spr >> 5; - sprlo = spr & 0x1f; - insn = 0x7c2002a6 | (sprlo << 16) | (sprhi << 11); /* mfspr r1,spr */ - - if (spr == 0x0ff0) - insn = 0x7c2000a6; /* mfmsr r1 */ - - rc = a2_scom_ram(scom, thread, insn, 0xf); - if (rc) - return rc; - return a2_scom_getgpr(scom, thread, 1, 1, out_spr); -} - -static int a2_scom_setgpr(scom_map_t scom, int thread, int gpr, - int alt, u64 val) -{ - u32 lis = 0x3c000000 | (gpr << 21); - u32 li = 0x38000000 | (gpr << 21); - u32 oris = 0x64000000 | (gpr << 21) | (gpr << 16); - u32 ori = 0x60000000 | (gpr << 21) | (gpr << 16); - u32 rldicr32 = 0x780007c6 | (gpr << 21) | (gpr << 16); - u32 highest = val >> 48; - u32 higher = (val >> 32) & 0xffff; - u32 high = (val >> 16) & 0xffff; - u32 low = val & 0xffff; - int lext = alt ? 0x8 : 0x0; - int oext = alt ? 0xf : 0x0; - int rc = 0; - - if (highest) - rc |= a2_scom_ram(scom, thread, lis | highest, lext); - - if (higher) { - if (highest) - rc |= a2_scom_ram(scom, thread, oris | higher, oext); - else - rc |= a2_scom_ram(scom, thread, li | higher, lext); - } - - if (highest || higher) - rc |= a2_scom_ram(scom, thread, rldicr32, oext); - - if (high) { - if (highest || higher) - rc |= a2_scom_ram(scom, thread, oris | high, oext); - else - rc |= a2_scom_ram(scom, thread, lis | high, lext); - } - - if (highest || higher || high) - rc |= a2_scom_ram(scom, thread, ori | low, oext); - else - rc |= a2_scom_ram(scom, thread, li | low, lext); - - return rc; -} - -static int a2_scom_setspr(scom_map_t scom, int thread, int spr, u64 val) -{ - int sprhi = spr >> 5; - int sprlo = spr & 0x1f; - /* mtspr spr, r1 */ - u32 insn = 0x7c2003a6 | (sprlo << 16) | (sprhi << 11); - - if (spr == 0x0ff0) - insn = 0x7c200124; /* mtmsr r1 */ - - if (a2_scom_setgpr(scom, thread, 1, 1, val)) - return -1; - - return a2_scom_ram(scom, thread, insn, 0xf); -} - -static int a2_scom_initial_tlb(scom_map_t scom, int thread) -{ - extern u32 a2_tlbinit_code_start[], a2_tlbinit_code_end[]; - extern u32 a2_tlbinit_after_iprot_flush[]; - extern u32 a2_tlbinit_after_linear_map[]; - u32 assoc, entries, i; - u64 epn, tlbcfg; - u32 *p; - int rc; - - /* Invalidate all entries (including iprot) */ - - rc = a2_scom_getspr(scom, thread, SPRN_TLB0CFG, &tlbcfg); - if (rc) - goto scom_fail; - entries = tlbcfg & TLBnCFG_N_ENTRY; - assoc = (tlbcfg & TLBnCFG_ASSOC) >> 24; - epn = 0; - - /* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */ - a2_scom_setspr(scom, thread, SPRN_MMUCR2, 0x000a7531); - /* Set MMUCR3 to write all thids bit to the TLB */ - a2_scom_setspr(scom, thread, SPRN_MMUCR3, 0x0000000f); - - /* Set MAS1 for 1G page size, and MAS2 to our initial EPN */ - a2_scom_setspr(scom, thread, SPRN_MAS1, MAS1_TSIZE(BOOK3E_PAGESZ_1GB)); - a2_scom_setspr(scom, thread, SPRN_MAS2, epn); - for (i = 0; i < entries; i++) { - - a2_scom_setspr(scom, thread, SPRN_MAS0, MAS0_ESEL(i % assoc)); - - /* tlbwe */ - rc = a2_scom_ram(scom, thread, 0x7c0007a4, 0); - if (rc) - goto scom_fail; - - /* Next entry is new address? */ - if((i + 1) % assoc == 0) { - epn += (1 << 30); - a2_scom_setspr(scom, thread, SPRN_MAS2, epn); - } - } - - /* Setup args for linear mapping */ - rc = a2_scom_setgpr(scom, thread, 3, 0, MAS0_TLBSEL(0)); - if (rc) - goto scom_fail; - - /* Linear mapping */ - for (p = a2_tlbinit_code_start; p < a2_tlbinit_after_linear_map; p++) { - rc = a2_scom_ram(scom, thread, *p, 0); - if (rc) - goto scom_fail; - } - - /* - * For the boot thread, between the linear mapping and the debug - * mappings there is a loop to flush iprot mappings. Ramming doesn't do - * branches, but the secondary threads don't need to be nearly as smart - * (i.e. we don't need to worry about invalidating the mapping we're - * standing on). - */ - - /* Debug mappings. Expects r11 = MAS0 from linear map (set above) */ - for (p = a2_tlbinit_after_iprot_flush; p < a2_tlbinit_code_end; p++) { - rc = a2_scom_ram(scom, thread, *p, 0); - if (rc) - goto scom_fail; - } - -scom_fail: - if (rc) - pr_err("Setting up initial TLB failed, err %d\n", rc); - - if (rc == -SCOM_RAMC_INTERRUPT) { - /* Interrupt, dump some status */ - int rc[10]; - u64 iar, srr0, srr1, esr, mas0, mas1, mas2, mas7_3, mas8, ccr2; - rc[0] = a2_scom_getspr(scom, thread, SPRN_IAR, &iar); - rc[1] = a2_scom_getspr(scom, thread, SPRN_SRR0, &srr0); - rc[2] = a2_scom_getspr(scom, thread, SPRN_SRR1, &srr1); - rc[3] = a2_scom_getspr(scom, thread, SPRN_ESR, &esr); - rc[4] = a2_scom_getspr(scom, thread, SPRN_MAS0, &mas0); - rc[5] = a2_scom_getspr(scom, thread, SPRN_MAS1, &mas1); - rc[6] = a2_scom_getspr(scom, thread, SPRN_MAS2, &mas2); - rc[7] = a2_scom_getspr(scom, thread, SPRN_MAS7_MAS3, &mas7_3); - rc[8] = a2_scom_getspr(scom, thread, SPRN_MAS8, &mas8); - rc[9] = a2_scom_getspr(scom, thread, SPRN_A2_CCR2, &ccr2); - pr_err(" -> retreived IAR =0x%llx (err %d)\n", iar, rc[0]); - pr_err(" retreived SRR0=0x%llx (err %d)\n", srr0, rc[1]); - pr_err(" retreived SRR1=0x%llx (err %d)\n", srr1, rc[2]); - pr_err(" retreived ESR =0x%llx (err %d)\n", esr, rc[3]); - pr_err(" retreived MAS0=0x%llx (err %d)\n", mas0, rc[4]); - pr_err(" retreived MAS1=0x%llx (err %d)\n", mas1, rc[5]); - pr_err(" retreived MAS2=0x%llx (err %d)\n", mas2, rc[6]); - pr_err(" retreived MS73=0x%llx (err %d)\n", mas7_3, rc[7]); - pr_err(" retreived MAS8=0x%llx (err %d)\n", mas8, rc[8]); - pr_err(" retreived CCR2=0x%llx (err %d)\n", ccr2, rc[9]); - } - - return rc; -} - -int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx, struct device_node *np) -{ - u64 init_iar, init_msr, init_ccr2; - unsigned long start_here; - int rc, core_setup; - scom_map_t scom; - u64 pccr0; - - scom = get_scom(lcpu, np, &core_setup); - if (!scom) { - printk(KERN_ERR "Couldn't map SCOM for CPU%d\n", lcpu); - return -1; - } - - pr_devel("Bringing up CPU%d using SCOM...\n", lcpu); - - if (scom_read(scom, SCOM_PCCR0, &pccr0) != 0) { - printk(KERN_ERR "XSCOM failure readng PCCR0 on CPU%d\n", lcpu); - return -1; - } - scom_write(scom, SCOM_PCCR0, pccr0 | SCOM_PCCR0_ENABLE_DEBUG | - SCOM_PCCR0_ENABLE_RAM); - - /* Stop the thead with THRCTL. If we are setting up the TLB we stop all - * threads. We also disable asynchronous interrupts while RAMing. - */ - if (core_setup) - scom_write(scom, SCOM_THRCTL_OR, - SCOM_THRCTL_T0_STOP | - SCOM_THRCTL_T1_STOP | - SCOM_THRCTL_T2_STOP | - SCOM_THRCTL_T3_STOP | - SCOM_THRCTL_ASYNC_DIS); - else - scom_write(scom, SCOM_THRCTL_OR, SCOM_THRCTL_T0_STOP >> thr_idx); - - /* Flush its pipeline just in case */ - scom_write(scom, SCOM_RAMC, ((u64)thr_idx << 17) | - SCOM_RAMC_FLUSH | SCOM_RAMC_ENABLE); - - a2_scom_getspr(scom, thr_idx, SPRN_IAR, &init_iar); - a2_scom_getspr(scom, thr_idx, 0x0ff0, &init_msr); - a2_scom_getspr(scom, thr_idx, SPRN_A2_CCR2, &init_ccr2); - - /* Set MSR to MSR_CM (0x0ff0 is magic value for MSR_CM) */ - rc = a2_scom_setspr(scom, thr_idx, 0x0ff0, MSR_CM); - if (rc) { - pr_err("Failed to set MSR ! err %d\n", rc); - return rc; - } - - /* RAM in an sync/isync for the sake of it */ - a2_scom_ram(scom, thr_idx, 0x7c0004ac, 0); - a2_scom_ram(scom, thr_idx, 0x4c00012c, 0); - - if (core_setup) { - pr_devel("CPU%d is first thread in core, initializing TLB...\n", - lcpu); - rc = a2_scom_initial_tlb(scom, thr_idx); - if (rc) - goto fail; - } - - start_here = ppc_function_entry(core_setup ? generic_secondary_smp_init - : generic_secondary_thread_init); - pr_devel("CPU%d entry point at 0x%lx...\n", lcpu, start_here); - - rc |= a2_scom_setspr(scom, thr_idx, SPRN_IAR, start_here); - rc |= a2_scom_setgpr(scom, thr_idx, 3, 0, - get_hard_smp_processor_id(lcpu)); - /* - * Tell book3e_secondary_core_init not to set up the TLB, we've - * already done that. - */ - rc |= a2_scom_setgpr(scom, thr_idx, 4, 0, 1); - - rc |= a2_scom_setspr(scom, thr_idx, SPRN_TENS, 0x1 << thr_idx); - - scom_write(scom, SCOM_RAMC, 0); - scom_write(scom, SCOM_THRCTL_AND, ~(SCOM_THRCTL_T0_STOP >> thr_idx)); - scom_write(scom, SCOM_PCCR0, pccr0); -fail: - pr_devel(" SCOM initialization %s\n", rc ? "failed" : "succeeded"); - if (rc) { - pr_err("Old IAR=0x%08llx MSR=0x%08llx CCR2=0x%08llx\n", - init_iar, init_msr, init_ccr2); - } - - return rc; -} diff --git a/arch/powerpc/platforms/wsp/scom_wsp.c b/arch/powerpc/platforms/wsp/scom_wsp.c deleted file mode 100644 index 6538b4de34fc..000000000000 --- a/arch/powerpc/platforms/wsp/scom_wsp.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * SCOM backend for WSP - * - * Copyright 2010 Benjamin Herrenschmidt, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/cpumask.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/spinlock.h> -#include <linux/types.h> -#include <linux/of_address.h> - -#include <asm/cputhreads.h> -#include <asm/reg_a2.h> -#include <asm/scom.h> -#include <asm/udbg.h> - -#include "wsp.h" - - -static scom_map_t wsp_scom_map(struct device_node *dev, u64 reg, u64 count) -{ - struct resource r; - u64 xscom_addr; - - if (!of_get_property(dev, "scom-controller", NULL)) { - pr_err("%s: device %s is not a SCOM controller\n", - __func__, dev->full_name); - return SCOM_MAP_INVALID; - } - - if (of_address_to_resource(dev, 0, &r)) { - pr_debug("Failed to find SCOM controller address\n"); - return 0; - } - - /* Transform the SCOM address into an XSCOM offset */ - xscom_addr = ((reg & 0x7f000000) >> 1) | ((reg & 0xfffff) << 3); - - return (scom_map_t)ioremap(r.start + xscom_addr, count << 3); -} - -static void wsp_scom_unmap(scom_map_t map) -{ - iounmap((void *)map); -} - -static int wsp_scom_read(scom_map_t map, u64 reg, u64 *value) -{ - u64 __iomem *addr = (u64 __iomem *)map; - - *value = in_be64(addr + reg); - - return 0; -} - -static int wsp_scom_write(scom_map_t map, u64 reg, u64 value) -{ - u64 __iomem *addr = (u64 __iomem *)map; - - out_be64(addr + reg, value); - - return 0; -} - -static const struct scom_controller wsp_scom_controller = { - .map = wsp_scom_map, - .unmap = wsp_scom_unmap, - .read = wsp_scom_read, - .write = wsp_scom_write -}; - -void scom_init_wsp(void) -{ - scom_init(&wsp_scom_controller); -} diff --git a/arch/powerpc/platforms/wsp/setup.c b/arch/powerpc/platforms/wsp/setup.c deleted file mode 100644 index 11ac2f05e01c..000000000000 --- a/arch/powerpc/platforms/wsp/setup.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright 2010 Michael Ellerman, IBM Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/of_platform.h> - -#include "wsp.h" - -/* - * Find chip-id by walking up device tree looking for ibm,wsp-chip-id property. - * Won't work for nodes that are not a descendant of a wsp node. - */ -int wsp_get_chip_id(struct device_node *dn) -{ - const u32 *p; - int rc; - - /* Start looking at the specified node, not its parent */ - dn = of_node_get(dn); - while (dn && !(p = of_get_property(dn, "ibm,wsp-chip-id", NULL))) - dn = of_get_next_parent(dn); - - if (!dn) - return -1; - - rc = *p; - of_node_put(dn); - - return rc; -} diff --git a/arch/powerpc/platforms/wsp/smp.c b/arch/powerpc/platforms/wsp/smp.c deleted file mode 100644 index 332a18b81403..000000000000 --- a/arch/powerpc/platforms/wsp/smp.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * SMP Support for A2 platforms - * - * Copyright 2007 Benjamin Herrenschmidt, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/cpumask.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/of.h> -#include <linux/smp.h> - -#include <asm/dbell.h> -#include <asm/machdep.h> -#include <asm/xics.h> - -#include "ics.h" -#include "wsp.h" - -static void smp_a2_setup_cpu(int cpu) -{ - doorbell_setup_this_cpu(); - - if (cpu != boot_cpuid) - xics_setup_cpu(); -} - -int smp_a2_kick_cpu(int nr) -{ - const char *enable_method; - struct device_node *np; - int thr_idx; - - if (nr < 0 || nr >= NR_CPUS) - return -ENOENT; - - np = of_get_cpu_node(nr, &thr_idx); - if (!np) - return -ENODEV; - - enable_method = of_get_property(np, "enable-method", NULL); - pr_devel("CPU%d has enable-method: \"%s\"\n", nr, enable_method); - - if (!enable_method) { - printk(KERN_ERR "CPU%d has no enable-method\n", nr); - return -ENOENT; - } else if (strcmp(enable_method, "ibm,a2-scom") == 0) { - if (a2_scom_startup_cpu(nr, thr_idx, np)) - return -1; - } else { - printk(KERN_ERR "CPU%d: Don't understand enable-method \"%s\"\n", - nr, enable_method); - return -EINVAL; - } - - /* - * The processor is currently spinning, waiting for the - * cpu_start field to become non-zero After we set cpu_start, - * the processor will continue on to secondary_start - */ - paca[nr].cpu_start = 1; - - return 0; -} - -static int __init smp_a2_probe(void) -{ - return num_possible_cpus(); -} - -static struct smp_ops_t a2_smp_ops = { - .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */ - .cause_ipi = doorbell_cause_ipi, - .probe = smp_a2_probe, - .kick_cpu = smp_a2_kick_cpu, - .setup_cpu = smp_a2_setup_cpu, -}; - -void __init a2_setup_smp(void) -{ - smp_ops = &a2_smp_ops; -} diff --git a/arch/powerpc/platforms/wsp/wsp.c b/arch/powerpc/platforms/wsp/wsp.c deleted file mode 100644 index 58cd1f00e1ef..000000000000 --- a/arch/powerpc/platforms/wsp/wsp.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright 2008-2011, IBM Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/smp.h> -#include <linux/delay.h> -#include <linux/time.h> -#include <linux/of_address.h> - -#include <asm/scom.h> - -#include "wsp.h" -#include "ics.h" - -#define WSP_SOC_COMPATIBLE "ibm,wsp-soc" -#define PBIC_COMPATIBLE "ibm,wsp-pbic" -#define COPRO_COMPATIBLE "ibm,wsp-coprocessor" - -static int __init wsp_probe_buses(void) -{ - static __initdata struct of_device_id bus_ids[] = { - /* - * every node in between needs to be here or you won't - * find it - */ - { .compatible = WSP_SOC_COMPATIBLE, }, - { .compatible = PBIC_COMPATIBLE, }, - { .compatible = COPRO_COMPATIBLE, }, - {}, - }; - of_platform_bus_probe(NULL, bus_ids, NULL); - - return 0; -} - -void __init wsp_setup_arch(void) -{ - /* init to some ~sane value until calibrate_delay() runs */ - loops_per_jiffy = 50000000; - - scom_init_wsp(); - - /* Setup SMP callback */ -#ifdef CONFIG_SMP - a2_setup_smp(); -#endif -#ifdef CONFIG_PCI - wsp_setup_pci(); -#endif -} - -void __init wsp_setup_irq(void) -{ - wsp_init_irq(); - opb_pic_init(); -} - - -int __init wsp_probe_devices(void) -{ - struct device_node *np; - - /* Our RTC is a ds1500. It seems to be programatically compatible - * with the ds1511 for which we have a driver so let's use that - */ - np = of_find_compatible_node(NULL, NULL, "dallas,ds1500"); - if (np != NULL) { - struct resource res; - if (of_address_to_resource(np, 0, &res) == 0) - platform_device_register_simple("ds1511", 0, &res, 1); - } - - wsp_probe_buses(); - - return 0; -} - -void wsp_halt(void) -{ - u64 val; - scom_map_t m; - struct device_node *dn; - struct device_node *mine; - struct device_node *me; - int rc; - - me = of_get_cpu_node(smp_processor_id(), NULL); - mine = scom_find_parent(me); - - /* This will halt all the A2s but not power off the chip */ - for_each_node_with_property(dn, "scom-controller") { - if (dn == mine) - continue; - m = scom_map(dn, 0, 1); - - /* read-modify-write it so the HW probe does not get - * confused */ - rc = scom_read(m, 0, &val); - if (rc == 0) - scom_write(m, 0, val | 1); - scom_unmap(m); - } - m = scom_map(mine, 0, 1); - rc = scom_read(m, 0, &val); - if (rc == 0) - scom_write(m, 0, val | 1); - /* should never return */ - scom_unmap(m); -} diff --git a/arch/powerpc/platforms/wsp/wsp.h b/arch/powerpc/platforms/wsp/wsp.h deleted file mode 100644 index a563a8aaf812..000000000000 --- a/arch/powerpc/platforms/wsp/wsp.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __WSP_H -#define __WSP_H - -#include <asm/wsp.h> - -/* Devtree compatible strings for major devices */ -#define PCIE_COMPATIBLE "ibm,wsp-pciex" - -extern void wsp_setup_arch(void); -extern void wsp_setup_irq(void); -extern int wsp_probe_devices(void); -extern void wsp_halt(void); - -extern void wsp_setup_pci(void); -extern void scom_init_wsp(void); - -extern void a2_setup_smp(void); -extern int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx, - struct device_node *np); -extern int smp_a2_kick_cpu(int nr); - -extern void opb_pic_init(void); - -/* chroma specific managment */ -extern void wsp_h8_restart(char *cmd); -extern void wsp_h8_power_off(void); -extern void __init wsp_setup_h8(void); - -#endif /* __WSP_H */ diff --git a/arch/powerpc/platforms/wsp/wsp_pci.c b/arch/powerpc/platforms/wsp/wsp_pci.c deleted file mode 100644 index 9a15e5b39bb8..000000000000 --- a/arch/powerpc/platforms/wsp/wsp_pci.c +++ /dev/null @@ -1,1134 +0,0 @@ -/* - * Copyright 2010 Ben Herrenschmidt, IBM Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define DEBUG - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/bootmem.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/debugfs.h> - -#include <asm/sections.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/pci-bridge.h> -#include <asm/machdep.h> -#include <asm/ppc-pci.h> -#include <asm/iommu.h> -#include <asm/io-workarounds.h> -#include <asm/debug.h> - -#include "wsp.h" -#include "wsp_pci.h" -#include "msi.h" - - -/* Max number of TVTs for one table. Only 32-bit tables can use - * multiple TVTs and so the max currently supported is thus 8 - * since only 2G of DMA space is supported - */ -#define MAX_TABLE_TVT_COUNT 8 - -struct wsp_dma_table { - struct list_head link; - struct iommu_table table; - struct wsp_phb *phb; - struct page *tces[MAX_TABLE_TVT_COUNT]; -}; - -/* We support DMA regions from 0...2G in 32bit space (no support for - * 64-bit DMA just yet). Each device gets a separate TCE table (TVT - * entry) with validation enabled (though not supported by SimiCS - * just yet). - * - * To simplify things, we divide this 2G space into N regions based - * on the constant below which could be turned into a tunable eventually - * - * We then assign dynamically those regions to devices as they show up. - * - * We use a bitmap as an allocator for these. - * - * Tables are allocated/created dynamically as devices are discovered, - * multiple TVT entries are used if needed - * - * When 64-bit DMA support is added we should simply use a separate set - * of larger regions (the HW supports 64 TVT entries). We can - * additionally create a bypass region in 64-bit space for performances - * though that would have a cost in term of security. - * - * If you set NUM_DMA32_REGIONS to 1, then a single table is shared - * for all devices and bus/dev/fn validation is disabled - * - * Note that a DMA32 region cannot be smaller than 256M so the max - * supported here for now is 8. We don't yet support sharing regions - * between multiple devices so the max number of devices supported - * is MAX_TABLE_TVT_COUNT. - */ -#define NUM_DMA32_REGIONS 1 - -struct wsp_phb { - struct pci_controller *hose; - - /* Lock controlling access to the list of dma tables. - * It does -not- protect against dma_* operations on - * those tables, those should be stopped before an entry - * is removed from the list. - * - * The lock is also used for error handling operations - */ - spinlock_t lock; - struct list_head dma_tables; - unsigned long dma32_map; - unsigned long dma32_base; - unsigned int dma32_num_regions; - unsigned long dma32_region_size; - - /* Debugfs stuff */ - struct dentry *ddir; - - struct list_head all; -}; -static LIST_HEAD(wsp_phbs); - -//#define cfg_debug(fmt...) pr_debug(fmt) -#define cfg_debug(fmt...) - - -static int wsp_pcie_read_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 *val) -{ - struct pci_controller *hose; - int suboff; - u64 addr; - - hose = pci_bus_to_host(bus); - if (hose == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - if (offset >= 0x1000) - return PCIBIOS_BAD_REGISTER_NUMBER; - addr = PCIE_REG_CA_ENABLE | - ((u64)bus->number) << PCIE_REG_CA_BUS_SHIFT | - ((u64)devfn) << PCIE_REG_CA_FUNC_SHIFT | - ((u64)offset & ~3) << PCIE_REG_CA_REG_SHIFT; - suboff = offset & 3; - - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - - switch (len) { - case 1: - addr |= (0x8ul >> suboff) << PCIE_REG_CA_BE_SHIFT; - out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr); - *val = (in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA) - >> (suboff << 3)) & 0xff; - cfg_debug("read 1 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%02x\n", - bus->number, devfn >> 3, devfn & 7, - offset, suboff, addr, *val); - break; - case 2: - addr |= (0xcul >> suboff) << PCIE_REG_CA_BE_SHIFT; - out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr); - *val = (in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA) - >> (suboff << 3)) & 0xffff; - cfg_debug("read 2 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%04x\n", - bus->number, devfn >> 3, devfn & 7, - offset, suboff, addr, *val); - break; - default: - addr |= 0xful << PCIE_REG_CA_BE_SHIFT; - out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr); - *val = in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA); - cfg_debug("read 4 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%08x\n", - bus->number, devfn >> 3, devfn & 7, - offset, suboff, addr, *val); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static int wsp_pcie_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 val) -{ - struct pci_controller *hose; - int suboff; - u64 addr; - - hose = pci_bus_to_host(bus); - if (hose == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - if (offset >= 0x1000) - return PCIBIOS_BAD_REGISTER_NUMBER; - addr = PCIE_REG_CA_ENABLE | - ((u64)bus->number) << PCIE_REG_CA_BUS_SHIFT | - ((u64)devfn) << PCIE_REG_CA_FUNC_SHIFT | - ((u64)offset & ~3) << PCIE_REG_CA_REG_SHIFT; - suboff = offset & 3; - - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - addr |= (0x8ul >> suboff) << PCIE_REG_CA_BE_SHIFT; - val <<= suboff << 3; - out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr); - out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val); - cfg_debug("write 1 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%02x\n", - bus->number, devfn >> 3, devfn & 7, - offset, suboff, addr, val); - break; - case 2: - addr |= (0xcul >> suboff) << PCIE_REG_CA_BE_SHIFT; - val <<= suboff << 3; - out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr); - out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val); - cfg_debug("write 2 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%04x\n", - bus->number, devfn >> 3, devfn & 7, - offset, suboff, addr, val); - break; - default: - addr |= 0xful << PCIE_REG_CA_BE_SHIFT; - out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr); - out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val); - cfg_debug("write 4 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%08x\n", - bus->number, devfn >> 3, devfn & 7, - offset, suboff, addr, val); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops wsp_pcie_pci_ops = -{ - .read = wsp_pcie_read_config, - .write = wsp_pcie_write_config, -}; - -#define TCE_SHIFT 12 -#define TCE_PAGE_SIZE (1 << TCE_SHIFT) -#define TCE_PCI_WRITE 0x2 /* write from PCI allowed */ -#define TCE_PCI_READ 0x1 /* read from PCI allowed */ -#define TCE_RPN_MASK 0x3fffffffffful /* 42-bit RPN (4K pages) */ -#define TCE_RPN_SHIFT 12 - -//#define dma_debug(fmt...) pr_debug(fmt) -#define dma_debug(fmt...) - -static int tce_build_wsp(struct iommu_table *tbl, long index, long npages, - unsigned long uaddr, enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct wsp_dma_table *ptbl = container_of(tbl, - struct wsp_dma_table, - table); - u64 proto_tce; - u64 *tcep; - u64 rpn; - - proto_tce = TCE_PCI_READ; -#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS - proto_tce |= TCE_PCI_WRITE; -#else - if (direction != DMA_TO_DEVICE) - proto_tce |= TCE_PCI_WRITE; -#endif - - /* XXX Make this faster by factoring out the page address for - * within a TCE table - */ - while (npages--) { - /* We don't use it->base as the table can be scattered */ - tcep = (u64 *)page_address(ptbl->tces[index >> 16]); - tcep += (index & 0xffff); - - /* can't move this out since we might cross LMB boundary */ - rpn = __pa(uaddr) >> TCE_SHIFT; - *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT; - - dma_debug("[DMA] TCE %p set to 0x%016llx (dma addr: 0x%lx)\n", - tcep, *tcep, (tbl->it_offset + index) << IOMMU_PAGE_SHIFT_4K); - - uaddr += TCE_PAGE_SIZE; - index++; - } - return 0; -} - -static void tce_free_wsp(struct iommu_table *tbl, long index, long npages) -{ - struct wsp_dma_table *ptbl = container_of(tbl, - struct wsp_dma_table, - table); -#ifndef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS - struct pci_controller *hose = ptbl->phb->hose; -#endif - u64 *tcep; - - /* XXX Make this faster by factoring out the page address for - * within a TCE table. Also use line-kill option to kill multiple - * TCEs at once - */ - while (npages--) { - /* We don't use it->base as the table can be scattered */ - tcep = (u64 *)page_address(ptbl->tces[index >> 16]); - tcep += (index & 0xffff); - dma_debug("[DMA] TCE %p cleared\n", tcep); - *tcep = 0; -#ifndef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS - /* Don't write there since it would pollute other MMIO accesses */ - out_be64(hose->cfg_data + PCIE_REG_TCE_KILL, - PCIE_REG_TCEKILL_SINGLE | PCIE_REG_TCEKILL_PS_4K | - (__pa(tcep) & PCIE_REG_TCEKILL_ADDR_MASK)); -#endif - index++; - } -} - -static struct wsp_dma_table *wsp_pci_create_dma32_table(struct wsp_phb *phb, - unsigned int region, - struct pci_dev *validate) -{ - struct pci_controller *hose = phb->hose; - unsigned long size = phb->dma32_region_size; - unsigned long addr = phb->dma32_region_size * region + phb->dma32_base; - struct wsp_dma_table *tbl; - int tvts_per_table, i, tvt, nid; - unsigned long flags; - - nid = of_node_to_nid(phb->hose->dn); - - /* Calculate how many TVTs are needed */ - tvts_per_table = size / 0x10000000; - if (tvts_per_table == 0) - tvts_per_table = 1; - - /* Calculate the base TVT index. We know all tables have the same - * size so we just do a simple multiply here - */ - tvt = region * tvts_per_table; - - pr_debug(" Region : %d\n", region); - pr_debug(" DMA range : 0x%08lx..0x%08lx\n", addr, addr + size - 1); - pr_debug(" Number of TVTs : %d\n", tvts_per_table); - pr_debug(" Base TVT : %d\n", tvt); - pr_debug(" Node : %d\n", nid); - - tbl = kzalloc_node(sizeof(struct wsp_dma_table), GFP_KERNEL, nid); - if (!tbl) - return ERR_PTR(-ENOMEM); - tbl->phb = phb; - - /* Create as many TVTs as needed, each represents 256M at most */ - for (i = 0; i < tvts_per_table; i++) { - u64 tvt_data1, tvt_data0; - - /* Allocate table. We use a 4K TCE size for now always so - * one table is always 8 * (258M / 4K) == 512K - */ - tbl->tces[i] = alloc_pages_node(nid, GFP_KERNEL, get_order(0x80000)); - if (tbl->tces[i] == NULL) - goto fail; - memset(page_address(tbl->tces[i]), 0, 0x80000); - - pr_debug(" TCE table %d at : %p\n", i, page_address(tbl->tces[i])); - - /* Table size. We currently set it to be the whole 256M region */ - tvt_data0 = 2ull << IODA_TVT0_TCE_TABLE_SIZE_SHIFT; - /* IO page size set to 4K */ - tvt_data1 = 1ull << IODA_TVT1_IO_PAGE_SIZE_SHIFT; - /* Shift in the address */ - tvt_data0 |= __pa(page_address(tbl->tces[i])) << IODA_TVT0_TTA_SHIFT; - - /* Validation stuff. We only validate fully bus/dev/fn for now - * one day maybe we can group devices but that isn't the case - * at the moment - */ - if (validate) { - tvt_data0 |= IODA_TVT0_BUSNUM_VALID_MASK; - tvt_data0 |= validate->bus->number; - tvt_data1 |= IODA_TVT1_DEVNUM_VALID; - tvt_data1 |= ((u64)PCI_SLOT(validate->devfn)) - << IODA_TVT1_DEVNUM_VALUE_SHIFT; - tvt_data1 |= IODA_TVT1_FUNCNUM_VALID; - tvt_data1 |= ((u64)PCI_FUNC(validate->devfn)) - << IODA_TVT1_FUNCNUM_VALUE_SHIFT; - } - - /* XX PE number is always 0 for now */ - - /* Program the values using the PHB lock */ - spin_lock_irqsave(&phb->lock, flags); - out_be64(hose->cfg_data + PCIE_REG_IODA_ADDR, - (tvt + i) | PCIE_REG_IODA_AD_TBL_TVT); - out_be64(hose->cfg_data + PCIE_REG_IODA_DATA1, tvt_data1); - out_be64(hose->cfg_data + PCIE_REG_IODA_DATA0, tvt_data0); - spin_unlock_irqrestore(&phb->lock, flags); - } - - /* Init bits and pieces */ - tbl->table.it_blocksize = 16; - tbl->table.it_page_shift = IOMMU_PAGE_SHIFT_4K; - tbl->table.it_offset = addr >> tbl->table.it_page_shift; - tbl->table.it_size = size >> tbl->table.it_page_shift; - - /* - * It's already blank but we clear it anyway. - * Consider an aditiona interface that makes cleaing optional - */ - iommu_init_table(&tbl->table, nid); - - list_add(&tbl->link, &phb->dma_tables); - return tbl; - - fail: - pr_debug(" Failed to allocate a 256M TCE table !\n"); - for (i = 0; i < tvts_per_table; i++) - if (tbl->tces[i]) - __free_pages(tbl->tces[i], get_order(0x80000)); - kfree(tbl); - return ERR_PTR(-ENOMEM); -} - -static void wsp_pci_dma_dev_setup(struct pci_dev *pdev) -{ - struct dev_archdata *archdata = &pdev->dev.archdata; - struct pci_controller *hose = pci_bus_to_host(pdev->bus); - struct wsp_phb *phb = hose->private_data; - struct wsp_dma_table *table = NULL; - unsigned long flags; - int i; - - /* Don't assign an iommu table to a bridge */ - if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) - return; - - pr_debug("%s: Setting up DMA...\n", pci_name(pdev)); - - spin_lock_irqsave(&phb->lock, flags); - - /* If only one region, check if it already exist */ - if (phb->dma32_num_regions == 1) { - spin_unlock_irqrestore(&phb->lock, flags); - if (list_empty(&phb->dma_tables)) - table = wsp_pci_create_dma32_table(phb, 0, NULL); - else - table = list_first_entry(&phb->dma_tables, - struct wsp_dma_table, - link); - } else { - /* else find a free region */ - for (i = 0; i < phb->dma32_num_regions && !table; i++) { - if (__test_and_set_bit(i, &phb->dma32_map)) - continue; - spin_unlock_irqrestore(&phb->lock, flags); - table = wsp_pci_create_dma32_table(phb, i, pdev); - } - } - - /* Check if we got an error */ - if (IS_ERR(table)) { - pr_err("%s: Failed to create DMA table, err %ld !\n", - pci_name(pdev), PTR_ERR(table)); - return; - } - - /* Or a valid table */ - if (table) { - pr_info("%s: Setup iommu: 32-bit DMA region 0x%08lx..0x%08lx\n", - pci_name(pdev), - table->table.it_offset << IOMMU_PAGE_SHIFT_4K, - (table->table.it_offset << IOMMU_PAGE_SHIFT_4K) - + phb->dma32_region_size - 1); - archdata->dma_data.iommu_table_base = &table->table; - return; - } - - /* Or no room */ - spin_unlock_irqrestore(&phb->lock, flags); - pr_err("%s: Out of DMA space !\n", pci_name(pdev)); -} - -static void __init wsp_pcie_configure_hw(struct pci_controller *hose) -{ - u64 val; - int i; - -#define DUMP_REG(x) \ - pr_debug("%-30s : 0x%016llx\n", #x, in_be64(hose->cfg_data + x)) - - /* - * Some WSP variants has a bogus class code by default in the PCI-E - * root complex's built-in P2P bridge - */ - val = in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1); - pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", val); - out_be64(hose->cfg_data + PCIE_REG_SYS_CFG1, - (val & ~PCIE_REG_SYS_CFG1_CLASS_CODE) | (PCI_CLASS_BRIDGE_PCI << 8)); - pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1)); - -#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS - /* XXX Disable TCE caching, it doesn't work on DD1 */ - out_be64(hose->cfg_data + 0xe50, - in_be64(hose->cfg_data + 0xe50) | (3ull << 62)); - printk("PCI-E DEBUG CONTROL 5 = 0x%llx\n", in_be64(hose->cfg_data + 0xe50)); -#endif - - /* Configure M32A and IO. IO is hard wired to be 1M for now */ - out_be64(hose->cfg_data + PCIE_REG_IO_BASE_ADDR, hose->io_base_phys); - out_be64(hose->cfg_data + PCIE_REG_IO_BASE_MASK, - (~(hose->io_resource.end - hose->io_resource.start)) & - 0x3fffffff000ul); - out_be64(hose->cfg_data + PCIE_REG_IO_START_ADDR, 0 | 1); - - out_be64(hose->cfg_data + PCIE_REG_M32A_BASE_ADDR, - hose->mem_resources[0].start); - printk("Want to write to M32A_BASE_MASK : 0x%llx\n", - (~(hose->mem_resources[0].end - - hose->mem_resources[0].start)) & 0x3ffffff0000ul); - out_be64(hose->cfg_data + PCIE_REG_M32A_BASE_MASK, - (~(hose->mem_resources[0].end - - hose->mem_resources[0].start)) & 0x3ffffff0000ul); - out_be64(hose->cfg_data + PCIE_REG_M32A_START_ADDR, - (hose->mem_resources[0].start - hose->mem_offset[0]) | 1); - - /* Clear all TVT entries - * - * XX Might get TVT count from device-tree - */ - for (i = 0; i < IODA_TVT_COUNT; i++) { - out_be64(hose->cfg_data + PCIE_REG_IODA_ADDR, - PCIE_REG_IODA_AD_TBL_TVT | i); - out_be64(hose->cfg_data + PCIE_REG_IODA_DATA1, 0); - out_be64(hose->cfg_data + PCIE_REG_IODA_DATA0, 0); - } - - /* Kill the TCE cache */ - out_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG, - in_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG) | - PCIE_REG_PHBC_64B_TCE_EN); - - /* Enable 32 & 64-bit MSIs, IO space and M32A */ - val = PCIE_REG_PHBC_32BIT_MSI_EN | - PCIE_REG_PHBC_IO_EN | - PCIE_REG_PHBC_64BIT_MSI_EN | - PCIE_REG_PHBC_M32A_EN; - if (iommu_is_off) - val |= PCIE_REG_PHBC_DMA_XLATE_BYPASS; - pr_debug("Will write config: 0x%llx\n", val); - out_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG, val); - - /* Enable error reporting */ - out_be64(hose->cfg_data + 0xe00, - in_be64(hose->cfg_data + 0xe00) | 0x0008000000000000ull); - - /* Mask an error that's generated when doing config space probe - * - * XXX Maybe we should only mask it around config space cycles... that or - * ignore it when we know we had a config space cycle recently ? - */ - out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS_MASK, 0x8000000000000000ull); - out_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS_MASK, 0x8000000000000000ull); - - /* Enable UTL errors, for now, all of them got to UTL irq 1 - * - * We similarily mask one UTL error caused apparently during normal - * probing. We also mask the link up error - */ - out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_ERR_SEV, 0); - out_be64(hose->cfg_data + PCIE_UTL_RC_ERR_SEVERITY, 0); - out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_ERROR_SEV, 0); - out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_IRQ_EN, 0xffffffff00000000ull); - out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_IRQ_EN, 0xff5fffff00000000ull); - out_be64(hose->cfg_data + PCIE_UTL_EP_ERR_IRQ_EN, 0xffffffff00000000ull); - - DUMP_REG(PCIE_REG_IO_BASE_ADDR); - DUMP_REG(PCIE_REG_IO_BASE_MASK); - DUMP_REG(PCIE_REG_IO_START_ADDR); - DUMP_REG(PCIE_REG_M32A_BASE_ADDR); - DUMP_REG(PCIE_REG_M32A_BASE_MASK); - DUMP_REG(PCIE_REG_M32A_START_ADDR); - DUMP_REG(PCIE_REG_M32B_BASE_ADDR); - DUMP_REG(PCIE_REG_M32B_BASE_MASK); - DUMP_REG(PCIE_REG_M32B_START_ADDR); - DUMP_REG(PCIE_REG_M64_BASE_ADDR); - DUMP_REG(PCIE_REG_M64_BASE_MASK); - DUMP_REG(PCIE_REG_M64_START_ADDR); - DUMP_REG(PCIE_REG_PHB_CONFIG); -} - -static void wsp_pci_wait_io_idle(struct wsp_phb *phb, unsigned long port) -{ - u64 val; - int i; - - for (i = 0; i < 10000; i++) { - val = in_be64(phb->hose->cfg_data + 0xe08); - if ((val & 0x1900000000000000ull) == 0x0100000000000000ull) - return; - udelay(1); - } - pr_warning("PCI IO timeout on domain %d port 0x%lx\n", - phb->hose->global_number, port); -} - -#define DEF_PCI_AC_RET_pio(name, ret, at, al, aa) \ -static ret wsp_pci_##name at \ -{ \ - struct iowa_bus *bus; \ - struct wsp_phb *phb; \ - unsigned long flags; \ - ret rval; \ - bus = iowa_pio_find_bus(aa); \ - WARN_ON(!bus); \ - phb = bus->private; \ - spin_lock_irqsave(&phb->lock, flags); \ - wsp_pci_wait_io_idle(phb, aa); \ - rval = __do_##name al; \ - spin_unlock_irqrestore(&phb->lock, flags); \ - return rval; \ -} - -#define DEF_PCI_AC_NORET_pio(name, at, al, aa) \ -static void wsp_pci_##name at \ -{ \ - struct iowa_bus *bus; \ - struct wsp_phb *phb; \ - unsigned long flags; \ - bus = iowa_pio_find_bus(aa); \ - WARN_ON(!bus); \ - phb = bus->private; \ - spin_lock_irqsave(&phb->lock, flags); \ - wsp_pci_wait_io_idle(phb, aa); \ - __do_##name al; \ - spin_unlock_irqrestore(&phb->lock, flags); \ -} - -#define DEF_PCI_AC_RET_mem(name, ret, at, al, aa) -#define DEF_PCI_AC_NORET_mem(name, at, al, aa) - -#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \ - DEF_PCI_AC_RET_##space(name, ret, at, al, aa) - -#define DEF_PCI_AC_NORET(name, at, al, space, aa) \ - DEF_PCI_AC_NORET_##space(name, at, al, aa) \ - - -#include <asm/io-defs.h> - -#undef DEF_PCI_AC_RET -#undef DEF_PCI_AC_NORET - -static struct ppc_pci_io wsp_pci_iops = { - .inb = wsp_pci_inb, - .inw = wsp_pci_inw, - .inl = wsp_pci_inl, - .outb = wsp_pci_outb, - .outw = wsp_pci_outw, - .outl = wsp_pci_outl, - .insb = wsp_pci_insb, - .insw = wsp_pci_insw, - .insl = wsp_pci_insl, - .outsb = wsp_pci_outsb, - .outsw = wsp_pci_outsw, - .outsl = wsp_pci_outsl, -}; - -static int __init wsp_setup_one_phb(struct device_node *np) -{ - struct pci_controller *hose; - struct wsp_phb *phb; - - pr_info("PCI: Setting up PCIe host bridge 0x%s\n", np->full_name); - - phb = zalloc_maybe_bootmem(sizeof(struct wsp_phb), GFP_KERNEL); - if (!phb) - return -ENOMEM; - hose = pcibios_alloc_controller(np); - if (!hose) { - /* Can't really free the phb */ - return -ENOMEM; - } - hose->private_data = phb; - phb->hose = hose; - - INIT_LIST_HEAD(&phb->dma_tables); - spin_lock_init(&phb->lock); - - /* XXX Use bus-range property ? */ - hose->first_busno = 0; - hose->last_busno = 0xff; - - /* We use cfg_data as the address for the whole bridge MMIO space - */ - hose->cfg_data = of_iomap(hose->dn, 0); - - pr_debug("PCIe registers mapped at 0x%p\n", hose->cfg_data); - - /* Get the ranges of the device-tree */ - pci_process_bridge_OF_ranges(hose, np, 0); - - /* XXX Force re-assigning of everything for now */ - pci_add_flags(PCI_REASSIGN_ALL_BUS | PCI_REASSIGN_ALL_RSRC | - PCI_ENABLE_PROC_DOMAINS); - - /* Calculate how the TCE space is divided */ - phb->dma32_base = 0; - phb->dma32_num_regions = NUM_DMA32_REGIONS; - if (phb->dma32_num_regions > MAX_TABLE_TVT_COUNT) { - pr_warning("IOMMU: Clamped to %d DMA32 regions\n", - MAX_TABLE_TVT_COUNT); - phb->dma32_num_regions = MAX_TABLE_TVT_COUNT; - } - phb->dma32_region_size = 0x80000000 / phb->dma32_num_regions; - - BUG_ON(!is_power_of_2(phb->dma32_region_size)); - - /* Setup config ops */ - hose->ops = &wsp_pcie_pci_ops; - - /* Configure the HW */ - wsp_pcie_configure_hw(hose); - - /* Instanciate IO workarounds */ - iowa_register_bus(hose, &wsp_pci_iops, NULL, phb); -#ifdef CONFIG_PCI_MSI - wsp_setup_phb_msi(hose); -#endif - - /* Add to global list */ - list_add(&phb->all, &wsp_phbs); - - return 0; -} - -void __init wsp_setup_pci(void) -{ - struct device_node *np; - int rc; - - /* Find host bridges */ - for_each_compatible_node(np, "pciex", PCIE_COMPATIBLE) { - rc = wsp_setup_one_phb(np); - if (rc) - pr_err("Failed to setup PCIe bridge %s, rc=%d\n", - np->full_name, rc); - } - - /* Establish device-tree linkage */ - pci_devs_phb_init(); - - /* Set DMA ops to use TCEs */ - if (iommu_is_off) { - pr_info("PCI-E: Disabled TCEs, using direct DMA\n"); - set_pci_dma_ops(&dma_direct_ops); - } else { - ppc_md.pci_dma_dev_setup = wsp_pci_dma_dev_setup; - ppc_md.tce_build = tce_build_wsp; - ppc_md.tce_free = tce_free_wsp; - set_pci_dma_ops(&dma_iommu_ops); - } -} - -#define err_debug(fmt...) pr_debug(fmt) -//#define err_debug(fmt...) - -static int __init wsp_pci_get_err_irq_no_dt(struct device_node *np) -{ - const u32 *prop; - int hw_irq; - - /* Ok, no interrupts property, let's try to find our child P2P */ - np = of_get_next_child(np, NULL); - if (np == NULL) - return 0; - - /* Grab it's interrupt map */ - prop = of_get_property(np, "interrupt-map", NULL); - if (prop == NULL) - return 0; - - /* Grab one of the interrupts in there, keep the low 4 bits */ - hw_irq = prop[5] & 0xf; - - /* 0..4 for PHB 0 and 5..9 for PHB 1 */ - if (hw_irq < 5) - hw_irq = 4; - else - hw_irq = 9; - hw_irq |= prop[5] & ~0xf; - - err_debug("PCI: Using 0x%x as error IRQ for %s\n", - hw_irq, np->parent->full_name); - return irq_create_mapping(NULL, hw_irq); -} - -static const struct { - u32 offset; - const char *name; -} wsp_pci_regs[] = { -#define DREG(x) { PCIE_REG_##x, #x } -#define DUTL(x) { PCIE_UTL_##x, "UTL_" #x } - /* Architected registers except CONFIG_ and IODA - * to avoid side effects - */ - DREG(DMA_CHAN_STATUS), - DREG(CPU_LOADSTORE_STATUS), - DREG(LOCK0), - DREG(LOCK1), - DREG(PHB_CONFIG), - DREG(IO_BASE_ADDR), - DREG(IO_BASE_MASK), - DREG(IO_START_ADDR), - DREG(M32A_BASE_ADDR), - DREG(M32A_BASE_MASK), - DREG(M32A_START_ADDR), - DREG(M32B_BASE_ADDR), - DREG(M32B_BASE_MASK), - DREG(M32B_START_ADDR), - DREG(M64_BASE_ADDR), - DREG(M64_BASE_MASK), - DREG(M64_START_ADDR), - DREG(TCE_KILL), - DREG(LOCK2), - DREG(PHB_GEN_CAP), - DREG(PHB_TCE_CAP), - DREG(PHB_IRQ_CAP), - DREG(PHB_EEH_CAP), - DREG(PAPR_ERR_INJ_CONTROL), - DREG(PAPR_ERR_INJ_ADDR), - DREG(PAPR_ERR_INJ_MASK), - - /* UTL core regs */ - DUTL(SYS_BUS_CONTROL), - DUTL(STATUS), - DUTL(SYS_BUS_AGENT_STATUS), - DUTL(SYS_BUS_AGENT_ERR_SEV), - DUTL(SYS_BUS_AGENT_IRQ_EN), - DUTL(SYS_BUS_BURST_SZ_CONF), - DUTL(REVISION_ID), - DUTL(OUT_POST_HDR_BUF_ALLOC), - DUTL(OUT_POST_DAT_BUF_ALLOC), - DUTL(IN_POST_HDR_BUF_ALLOC), - DUTL(IN_POST_DAT_BUF_ALLOC), - DUTL(OUT_NP_BUF_ALLOC), - DUTL(IN_NP_BUF_ALLOC), - DUTL(PCIE_TAGS_ALLOC), - DUTL(GBIF_READ_TAGS_ALLOC), - - DUTL(PCIE_PORT_CONTROL), - DUTL(PCIE_PORT_STATUS), - DUTL(PCIE_PORT_ERROR_SEV), - DUTL(PCIE_PORT_IRQ_EN), - DUTL(RC_STATUS), - DUTL(RC_ERR_SEVERITY), - DUTL(RC_IRQ_EN), - DUTL(EP_STATUS), - DUTL(EP_ERR_SEVERITY), - DUTL(EP_ERR_IRQ_EN), - DUTL(PCI_PM_CTRL1), - DUTL(PCI_PM_CTRL2), - - /* PCIe stack regs */ - DREG(SYSTEM_CONFIG1), - DREG(SYSTEM_CONFIG2), - DREG(EP_SYSTEM_CONFIG), - DREG(EP_FLR), - DREG(EP_BAR_CONFIG), - DREG(LINK_CONFIG), - DREG(PM_CONFIG), - DREG(DLP_CONTROL), - DREG(DLP_STATUS), - DREG(ERR_REPORT_CONTROL), - DREG(SLOT_CONTROL1), - DREG(SLOT_CONTROL2), - DREG(UTL_CONFIG), - DREG(BUFFERS_CONFIG), - DREG(ERROR_INJECT), - DREG(SRIOV_CONFIG), - DREG(PF0_SRIOV_STATUS), - DREG(PF1_SRIOV_STATUS), - DREG(PORT_NUMBER), - DREG(POR_SYSTEM_CONFIG), - - /* Internal logic regs */ - DREG(PHB_VERSION), - DREG(RESET), - DREG(PHB_CONTROL), - DREG(PHB_TIMEOUT_CONTROL1), - DREG(PHB_QUIESCE_DMA), - DREG(PHB_DMA_READ_TAG_ACTV), - DREG(PHB_TCE_READ_TAG_ACTV), - - /* FIR registers */ - DREG(LEM_FIR_ACCUM), - DREG(LEM_FIR_AND_MASK), - DREG(LEM_FIR_OR_MASK), - DREG(LEM_ACTION0), - DREG(LEM_ACTION1), - DREG(LEM_ERROR_MASK), - DREG(LEM_ERROR_AND_MASK), - DREG(LEM_ERROR_OR_MASK), - - /* Error traps registers */ - DREG(PHB_ERR_STATUS), - DREG(PHB_ERR_STATUS), - DREG(PHB_ERR1_STATUS), - DREG(PHB_ERR_INJECT), - DREG(PHB_ERR_LEM_ENABLE), - DREG(PHB_ERR_IRQ_ENABLE), - DREG(PHB_ERR_FREEZE_ENABLE), - DREG(PHB_ERR_SIDE_ENABLE), - DREG(PHB_ERR_LOG_0), - DREG(PHB_ERR_LOG_1), - DREG(PHB_ERR_STATUS_MASK), - DREG(PHB_ERR1_STATUS_MASK), - DREG(MMIO_ERR_STATUS), - DREG(MMIO_ERR1_STATUS), - DREG(MMIO_ERR_INJECT), - DREG(MMIO_ERR_LEM_ENABLE), - DREG(MMIO_ERR_IRQ_ENABLE), - DREG(MMIO_ERR_FREEZE_ENABLE), - DREG(MMIO_ERR_SIDE_ENABLE), - DREG(MMIO_ERR_LOG_0), - DREG(MMIO_ERR_LOG_1), - DREG(MMIO_ERR_STATUS_MASK), - DREG(MMIO_ERR1_STATUS_MASK), - DREG(DMA_ERR_STATUS), - DREG(DMA_ERR1_STATUS), - DREG(DMA_ERR_INJECT), - DREG(DMA_ERR_LEM_ENABLE), - DREG(DMA_ERR_IRQ_ENABLE), - DREG(DMA_ERR_FREEZE_ENABLE), - DREG(DMA_ERR_SIDE_ENABLE), - DREG(DMA_ERR_LOG_0), - DREG(DMA_ERR_LOG_1), - DREG(DMA_ERR_STATUS_MASK), - DREG(DMA_ERR1_STATUS_MASK), - - /* Debug and Trace registers */ - DREG(PHB_DEBUG_CONTROL0), - DREG(PHB_DEBUG_STATUS0), - DREG(PHB_DEBUG_CONTROL1), - DREG(PHB_DEBUG_STATUS1), - DREG(PHB_DEBUG_CONTROL2), - DREG(PHB_DEBUG_STATUS2), - DREG(PHB_DEBUG_CONTROL3), - DREG(PHB_DEBUG_STATUS3), - DREG(PHB_DEBUG_CONTROL4), - DREG(PHB_DEBUG_STATUS4), - DREG(PHB_DEBUG_CONTROL5), - DREG(PHB_DEBUG_STATUS5), - - /* Don't seem to exist ... - DREG(PHB_DEBUG_CONTROL6), - DREG(PHB_DEBUG_STATUS6), - */ -}; - -static int wsp_pci_regs_show(struct seq_file *m, void *private) -{ - struct wsp_phb *phb = m->private; - struct pci_controller *hose = phb->hose; - int i; - - for (i = 0; i < ARRAY_SIZE(wsp_pci_regs); i++) { - /* Skip write-only regs */ - if (wsp_pci_regs[i].offset == 0xc08 || - wsp_pci_regs[i].offset == 0xc10 || - wsp_pci_regs[i].offset == 0xc38 || - wsp_pci_regs[i].offset == 0xc40) - continue; - seq_printf(m, "0x%03x: 0x%016llx %s\n", - wsp_pci_regs[i].offset, - in_be64(hose->cfg_data + wsp_pci_regs[i].offset), - wsp_pci_regs[i].name); - } - return 0; -} - -static int wsp_pci_regs_open(struct inode *inode, struct file *file) -{ - return single_open(file, wsp_pci_regs_show, inode->i_private); -} - -static const struct file_operations wsp_pci_regs_fops = { - .open = wsp_pci_regs_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int wsp_pci_reg_set(void *data, u64 val) -{ - out_be64((void __iomem *)data, val); - return 0; -} - -static int wsp_pci_reg_get(void *data, u64 *val) -{ - *val = in_be64((void __iomem *)data); - return 0; -} - -DEFINE_SIMPLE_ATTRIBUTE(wsp_pci_reg_fops, wsp_pci_reg_get, wsp_pci_reg_set, "0x%llx\n"); - -static irqreturn_t wsp_pci_err_irq(int irq, void *dev_id) -{ - struct wsp_phb *phb = dev_id; - struct pci_controller *hose = phb->hose; - irqreturn_t handled = IRQ_NONE; - struct wsp_pcie_err_log_data ed; - - pr_err("PCI: Error interrupt on %s (PHB %d)\n", - hose->dn->full_name, hose->global_number); - again: - memset(&ed, 0, sizeof(ed)); - - /* Read and clear UTL errors */ - ed.utl_sys_err = in_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_STATUS); - if (ed.utl_sys_err) - out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_STATUS, ed.utl_sys_err); - ed.utl_port_err = in_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_STATUS); - if (ed.utl_port_err) - out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_STATUS, ed.utl_port_err); - ed.utl_rc_err = in_be64(hose->cfg_data + PCIE_UTL_RC_STATUS); - if (ed.utl_rc_err) - out_be64(hose->cfg_data + PCIE_UTL_RC_STATUS, ed.utl_rc_err); - - /* Read and clear main trap errors */ - ed.phb_err = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_STATUS); - if (ed.phb_err) { - ed.phb_err1 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR1_STATUS); - ed.phb_log0 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_LOG_0); - ed.phb_log1 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_LOG_1); - out_be64(hose->cfg_data + PCIE_REG_PHB_ERR1_STATUS, 0); - out_be64(hose->cfg_data + PCIE_REG_PHB_ERR_STATUS, 0); - } - ed.mmio_err = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_STATUS); - if (ed.mmio_err) { - ed.mmio_err1 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR1_STATUS); - ed.mmio_log0 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_LOG_0); - ed.mmio_log1 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_LOG_1); - out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR1_STATUS, 0); - out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_STATUS, 0); - } - ed.dma_err = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS); - if (ed.dma_err) { - ed.dma_err1 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS); - ed.dma_log0 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_LOG_0); - ed.dma_log1 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_LOG_1); - out_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS, 0); - out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS, 0); - } - - /* Now print things out */ - if (ed.phb_err) { - pr_err(" PHB Error Status : 0x%016llx\n", ed.phb_err); - pr_err(" PHB First Error Status: 0x%016llx\n", ed.phb_err1); - pr_err(" PHB Error Log 0 : 0x%016llx\n", ed.phb_log0); - pr_err(" PHB Error Log 1 : 0x%016llx\n", ed.phb_log1); - } - if (ed.mmio_err) { - pr_err(" MMIO Error Status : 0x%016llx\n", ed.mmio_err); - pr_err(" MMIO First Error Status: 0x%016llx\n", ed.mmio_err1); - pr_err(" MMIO Error Log 0 : 0x%016llx\n", ed.mmio_log0); - pr_err(" MMIO Error Log 1 : 0x%016llx\n", ed.mmio_log1); - } - if (ed.dma_err) { - pr_err(" DMA Error Status : 0x%016llx\n", ed.dma_err); - pr_err(" DMA First Error Status: 0x%016llx\n", ed.dma_err1); - pr_err(" DMA Error Log 0 : 0x%016llx\n", ed.dma_log0); - pr_err(" DMA Error Log 1 : 0x%016llx\n", ed.dma_log1); - } - if (ed.utl_sys_err) - pr_err(" UTL Sys Error Status : 0x%016llx\n", ed.utl_sys_err); - if (ed.utl_port_err) - pr_err(" UTL Port Error Status : 0x%016llx\n", ed.utl_port_err); - if (ed.utl_rc_err) - pr_err(" UTL RC Error Status : 0x%016llx\n", ed.utl_rc_err); - - /* Interrupts are caused by the error traps. If we had any error there - * we loop again in case the UTL buffered some new stuff between - * going there and going to the traps - */ - if (ed.dma_err || ed.mmio_err || ed.phb_err) { - handled = IRQ_HANDLED; - goto again; - } - return handled; -} - -static void __init wsp_setup_pci_err_reporting(struct wsp_phb *phb) -{ - struct pci_controller *hose = phb->hose; - int err_irq, i, rc; - char fname[16]; - - /* Create a debugfs file for that PHB */ - sprintf(fname, "phb%d", phb->hose->global_number); - phb->ddir = debugfs_create_dir(fname, powerpc_debugfs_root); - - /* Some useful debug output */ - if (phb->ddir) { - struct dentry *d = debugfs_create_dir("regs", phb->ddir); - char tmp[64]; - - for (i = 0; i < ARRAY_SIZE(wsp_pci_regs); i++) { - sprintf(tmp, "%03x_%s", wsp_pci_regs[i].offset, - wsp_pci_regs[i].name); - debugfs_create_file(tmp, 0600, d, - hose->cfg_data + wsp_pci_regs[i].offset, - &wsp_pci_reg_fops); - } - debugfs_create_file("all_regs", 0600, phb->ddir, phb, &wsp_pci_regs_fops); - } - - /* Find the IRQ number for that PHB */ - err_irq = irq_of_parse_and_map(hose->dn, 0); - if (err_irq == 0) - /* XXX Error IRQ lacking from device-tree */ - err_irq = wsp_pci_get_err_irq_no_dt(hose->dn); - if (err_irq == 0) { - pr_err("PCI: Failed to fetch error interrupt for %s\n", - hose->dn->full_name); - return; - } - /* Request it */ - rc = request_irq(err_irq, wsp_pci_err_irq, 0, "wsp_pci error", phb); - if (rc) { - pr_err("PCI: Failed to request interrupt for %s\n", - hose->dn->full_name); - } - /* Enable interrupts for all errors for now */ - out_be64(hose->cfg_data + PCIE_REG_PHB_ERR_IRQ_ENABLE, 0xffffffffffffffffull); - out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_IRQ_ENABLE, 0xffffffffffffffffull); - out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_IRQ_ENABLE, 0xffffffffffffffffull); -} - -/* - * This is called later to hookup with the error interrupt - */ -static int __init wsp_setup_pci_late(void) -{ - struct wsp_phb *phb; - - list_for_each_entry(phb, &wsp_phbs, all) - wsp_setup_pci_err_reporting(phb); - - return 0; -} -arch_initcall(wsp_setup_pci_late); diff --git a/arch/powerpc/platforms/wsp/wsp_pci.h b/arch/powerpc/platforms/wsp/wsp_pci.h deleted file mode 100644 index 52e9bd95250d..000000000000 --- a/arch/powerpc/platforms/wsp/wsp_pci.h +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Copyright 2010 Ben Herrenschmidt, IBM Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __WSP_PCI_H -#define __WSP_PCI_H - -/* Architected registers */ -#define PCIE_REG_DMA_CHAN_STATUS 0x110 -#define PCIE_REG_CPU_LOADSTORE_STATUS 0x120 - -#define PCIE_REG_CONFIG_DATA 0x130 -#define PCIE_REG_LOCK0 0x138 -#define PCIE_REG_CONFIG_ADDRESS 0x140 -#define PCIE_REG_CA_ENABLE 0x8000000000000000ull -#define PCIE_REG_CA_BUS_MASK 0x0ff0000000000000ull -#define PCIE_REG_CA_BUS_SHIFT (20+32) -#define PCIE_REG_CA_DEV_MASK 0x000f800000000000ull -#define PCIE_REG_CA_DEV_SHIFT (15+32) -#define PCIE_REG_CA_FUNC_MASK 0x0000700000000000ull -#define PCIE_REG_CA_FUNC_SHIFT (12+32) -#define PCIE_REG_CA_REG_MASK 0x00000fff00000000ull -#define PCIE_REG_CA_REG_SHIFT ( 0+32) -#define PCIE_REG_CA_BE_MASK 0x00000000f0000000ull -#define PCIE_REG_CA_BE_SHIFT ( 28) -#define PCIE_REG_LOCK1 0x148 - -#define PCIE_REG_PHB_CONFIG 0x160 -#define PCIE_REG_PHBC_64B_TCE_EN 0x2000000000000000ull -#define PCIE_REG_PHBC_MMIO_DMA_FREEZE_EN 0x1000000000000000ull -#define PCIE_REG_PHBC_32BIT_MSI_EN 0x0080000000000000ull -#define PCIE_REG_PHBC_M64_EN 0x0040000000000000ull -#define PCIE_REG_PHBC_IO_EN 0x0008000000000000ull -#define PCIE_REG_PHBC_64BIT_MSI_EN 0x0002000000000000ull -#define PCIE_REG_PHBC_M32A_EN 0x0000800000000000ull -#define PCIE_REG_PHBC_M32B_EN 0x0000400000000000ull -#define PCIE_REG_PHBC_MSI_PE_VALIDATE 0x0000200000000000ull -#define PCIE_REG_PHBC_DMA_XLATE_BYPASS 0x0000100000000000ull - -#define PCIE_REG_IO_BASE_ADDR 0x170 -#define PCIE_REG_IO_BASE_MASK 0x178 -#define PCIE_REG_IO_START_ADDR 0x180 - -#define PCIE_REG_M32A_BASE_ADDR 0x190 -#define PCIE_REG_M32A_BASE_MASK 0x198 -#define PCIE_REG_M32A_START_ADDR 0x1a0 - -#define PCIE_REG_M32B_BASE_ADDR 0x1b0 -#define PCIE_REG_M32B_BASE_MASK 0x1b8 -#define PCIE_REG_M32B_START_ADDR 0x1c0 - -#define PCIE_REG_M64_BASE_ADDR 0x1e0 -#define PCIE_REG_M64_BASE_MASK 0x1e8 -#define PCIE_REG_M64_START_ADDR 0x1f0 - -#define PCIE_REG_TCE_KILL 0x210 -#define PCIE_REG_TCEKILL_SINGLE 0x8000000000000000ull -#define PCIE_REG_TCEKILL_ADDR_MASK 0x000003fffffffff8ull -#define PCIE_REG_TCEKILL_PS_4K 0 -#define PCIE_REG_TCEKILL_PS_64K 1 -#define PCIE_REG_TCEKILL_PS_16M 2 -#define PCIE_REG_TCEKILL_PS_16G 3 - -#define PCIE_REG_IODA_ADDR 0x220 -#define PCIE_REG_IODA_AD_AUTOINC 0x8000000000000000ull -#define PCIE_REG_IODA_AD_TBL_MVT 0x0005000000000000ull -#define PCIE_REG_IODA_AD_TBL_PELT 0x0006000000000000ull -#define PCIE_REG_IODA_AD_TBL_PESTA 0x0007000000000000ull -#define PCIE_REG_IODA_AD_TBL_PESTB 0x0008000000000000ull -#define PCIE_REG_IODA_AD_TBL_TVT 0x0009000000000000ull -#define PCIE_REG_IODA_AD_TBL_TCE 0x000a000000000000ull -#define PCIE_REG_IODA_DATA0 0x228 -#define PCIE_REG_IODA_DATA1 0x230 - -#define PCIE_REG_LOCK2 0x240 - -#define PCIE_REG_PHB_GEN_CAP 0x250 -#define PCIE_REG_PHB_TCE_CAP 0x258 -#define PCIE_REG_PHB_IRQ_CAP 0x260 -#define PCIE_REG_PHB_EEH_CAP 0x268 - -#define PCIE_REG_PAPR_ERR_INJ_CONTROL 0x2b0 -#define PCIE_REG_PAPR_ERR_INJ_ADDR 0x2b8 -#define PCIE_REG_PAPR_ERR_INJ_MASK 0x2c0 - - -#define PCIE_REG_SYS_CFG1 0x600 -#define PCIE_REG_SYS_CFG1_CLASS_CODE 0x0000000000ffffffull - -#define IODA_TVT0_TTA_MASK 0x000fffffffff0000ull -#define IODA_TVT0_TTA_SHIFT 4 -#define IODA_TVT0_BUSNUM_VALID_MASK 0x000000000000e000ull -#define IODA_TVT0_TCE_TABLE_SIZE_MASK 0x0000000000001f00ull -#define IODA_TVT0_TCE_TABLE_SIZE_SHIFT 8 -#define IODA_TVT0_BUSNUM_VALUE_MASK 0x00000000000000ffull -#define IODA_TVT0_BUSNUM_VALID_SHIFT 0 -#define IODA_TVT1_DEVNUM_VALID 0x2000000000000000ull -#define IODA_TVT1_DEVNUM_VALUE_MASK 0x1f00000000000000ull -#define IODA_TVT1_DEVNUM_VALUE_SHIFT 56 -#define IODA_TVT1_FUNCNUM_VALID 0x0008000000000000ull -#define IODA_TVT1_FUNCNUM_VALUE_MASK 0x0007000000000000ull -#define IODA_TVT1_FUNCNUM_VALUE_SHIFT 48 -#define IODA_TVT1_IO_PAGE_SIZE_MASK 0x00001f0000000000ull -#define IODA_TVT1_IO_PAGE_SIZE_SHIFT 40 -#define IODA_TVT1_PE_NUMBER_MASK 0x000000000000003full -#define IODA_TVT1_PE_NUMBER_SHIFT 0 - -#define IODA_TVT_COUNT 64 - -/* UTL Core registers */ -#define PCIE_UTL_SYS_BUS_CONTROL 0x400 -#define PCIE_UTL_STATUS 0x408 -#define PCIE_UTL_SYS_BUS_AGENT_STATUS 0x410 -#define PCIE_UTL_SYS_BUS_AGENT_ERR_SEV 0x418 -#define PCIE_UTL_SYS_BUS_AGENT_IRQ_EN 0x420 -#define PCIE_UTL_SYS_BUS_BURST_SZ_CONF 0x440 -#define PCIE_UTL_REVISION_ID 0x448 - -#define PCIE_UTL_OUT_POST_HDR_BUF_ALLOC 0x4c0 -#define PCIE_UTL_OUT_POST_DAT_BUF_ALLOC 0x4d0 -#define PCIE_UTL_IN_POST_HDR_BUF_ALLOC 0x4e0 -#define PCIE_UTL_IN_POST_DAT_BUF_ALLOC 0x4f0 -#define PCIE_UTL_OUT_NP_BUF_ALLOC 0x500 -#define PCIE_UTL_IN_NP_BUF_ALLOC 0x510 -#define PCIE_UTL_PCIE_TAGS_ALLOC 0x520 -#define PCIE_UTL_GBIF_READ_TAGS_ALLOC 0x530 - -#define PCIE_UTL_PCIE_PORT_CONTROL 0x540 -#define PCIE_UTL_PCIE_PORT_STATUS 0x548 -#define PCIE_UTL_PCIE_PORT_ERROR_SEV 0x550 -#define PCIE_UTL_PCIE_PORT_IRQ_EN 0x558 -#define PCIE_UTL_RC_STATUS 0x560 -#define PCIE_UTL_RC_ERR_SEVERITY 0x568 -#define PCIE_UTL_RC_IRQ_EN 0x570 -#define PCIE_UTL_EP_STATUS 0x578 -#define PCIE_UTL_EP_ERR_SEVERITY 0x580 -#define PCIE_UTL_EP_ERR_IRQ_EN 0x588 - -#define PCIE_UTL_PCI_PM_CTRL1 0x590 -#define PCIE_UTL_PCI_PM_CTRL2 0x598 - -/* PCIe stack registers */ -#define PCIE_REG_SYSTEM_CONFIG1 0x600 -#define PCIE_REG_SYSTEM_CONFIG2 0x608 -#define PCIE_REG_EP_SYSTEM_CONFIG 0x618 -#define PCIE_REG_EP_FLR 0x620 -#define PCIE_REG_EP_BAR_CONFIG 0x628 -#define PCIE_REG_LINK_CONFIG 0x630 -#define PCIE_REG_PM_CONFIG 0x640 -#define PCIE_REG_DLP_CONTROL 0x650 -#define PCIE_REG_DLP_STATUS 0x658 -#define PCIE_REG_ERR_REPORT_CONTROL 0x660 -#define PCIE_REG_SLOT_CONTROL1 0x670 -#define PCIE_REG_SLOT_CONTROL2 0x678 -#define PCIE_REG_UTL_CONFIG 0x680 -#define PCIE_REG_BUFFERS_CONFIG 0x690 -#define PCIE_REG_ERROR_INJECT 0x698 -#define PCIE_REG_SRIOV_CONFIG 0x6a0 -#define PCIE_REG_PF0_SRIOV_STATUS 0x6a8 -#define PCIE_REG_PF1_SRIOV_STATUS 0x6b0 -#define PCIE_REG_PORT_NUMBER 0x700 -#define PCIE_REG_POR_SYSTEM_CONFIG 0x708 - -/* PHB internal logic registers */ -#define PCIE_REG_PHB_VERSION 0x800 -#define PCIE_REG_RESET 0x808 -#define PCIE_REG_PHB_CONTROL 0x810 -#define PCIE_REG_PHB_TIMEOUT_CONTROL1 0x878 -#define PCIE_REG_PHB_QUIESCE_DMA 0x888 -#define PCIE_REG_PHB_DMA_READ_TAG_ACTV 0x900 -#define PCIE_REG_PHB_TCE_READ_TAG_ACTV 0x908 - -/* FIR registers */ -#define PCIE_REG_LEM_FIR_ACCUM 0xc00 -#define PCIE_REG_LEM_FIR_AND_MASK 0xc08 -#define PCIE_REG_LEM_FIR_OR_MASK 0xc10 -#define PCIE_REG_LEM_ACTION0 0xc18 -#define PCIE_REG_LEM_ACTION1 0xc20 -#define PCIE_REG_LEM_ERROR_MASK 0xc30 -#define PCIE_REG_LEM_ERROR_AND_MASK 0xc38 -#define PCIE_REG_LEM_ERROR_OR_MASK 0xc40 - -/* PHB Error registers */ -#define PCIE_REG_PHB_ERR_STATUS 0xc80 -#define PCIE_REG_PHB_ERR1_STATUS 0xc88 -#define PCIE_REG_PHB_ERR_INJECT 0xc90 -#define PCIE_REG_PHB_ERR_LEM_ENABLE 0xc98 -#define PCIE_REG_PHB_ERR_IRQ_ENABLE 0xca0 -#define PCIE_REG_PHB_ERR_FREEZE_ENABLE 0xca8 -#define PCIE_REG_PHB_ERR_SIDE_ENABLE 0xcb8 -#define PCIE_REG_PHB_ERR_LOG_0 0xcc0 -#define PCIE_REG_PHB_ERR_LOG_1 0xcc8 -#define PCIE_REG_PHB_ERR_STATUS_MASK 0xcd0 -#define PCIE_REG_PHB_ERR1_STATUS_MASK 0xcd8 - -#define PCIE_REG_MMIO_ERR_STATUS 0xd00 -#define PCIE_REG_MMIO_ERR1_STATUS 0xd08 -#define PCIE_REG_MMIO_ERR_INJECT 0xd10 -#define PCIE_REG_MMIO_ERR_LEM_ENABLE 0xd18 -#define PCIE_REG_MMIO_ERR_IRQ_ENABLE 0xd20 -#define PCIE_REG_MMIO_ERR_FREEZE_ENABLE 0xd28 -#define PCIE_REG_MMIO_ERR_SIDE_ENABLE 0xd38 -#define PCIE_REG_MMIO_ERR_LOG_0 0xd40 -#define PCIE_REG_MMIO_ERR_LOG_1 0xd48 -#define PCIE_REG_MMIO_ERR_STATUS_MASK 0xd50 -#define PCIE_REG_MMIO_ERR1_STATUS_MASK 0xd58 - -#define PCIE_REG_DMA_ERR_STATUS 0xd80 -#define PCIE_REG_DMA_ERR1_STATUS 0xd88 -#define PCIE_REG_DMA_ERR_INJECT 0xd90 -#define PCIE_REG_DMA_ERR_LEM_ENABLE 0xd98 -#define PCIE_REG_DMA_ERR_IRQ_ENABLE 0xda0 -#define PCIE_REG_DMA_ERR_FREEZE_ENABLE 0xda8 -#define PCIE_REG_DMA_ERR_SIDE_ENABLE 0xdb8 -#define PCIE_REG_DMA_ERR_LOG_0 0xdc0 -#define PCIE_REG_DMA_ERR_LOG_1 0xdc8 -#define PCIE_REG_DMA_ERR_STATUS_MASK 0xdd0 -#define PCIE_REG_DMA_ERR1_STATUS_MASK 0xdd8 - -/* Shortcuts for access to the above using the PHB definitions - * with an offset - */ -#define PCIE_REG_ERR_PHB_OFFSET 0x0 -#define PCIE_REG_ERR_MMIO_OFFSET 0x80 -#define PCIE_REG_ERR_DMA_OFFSET 0x100 - -/* Debug and Trace registers */ -#define PCIE_REG_PHB_DEBUG_CONTROL0 0xe00 -#define PCIE_REG_PHB_DEBUG_STATUS0 0xe08 -#define PCIE_REG_PHB_DEBUG_CONTROL1 0xe10 -#define PCIE_REG_PHB_DEBUG_STATUS1 0xe18 -#define PCIE_REG_PHB_DEBUG_CONTROL2 0xe20 -#define PCIE_REG_PHB_DEBUG_STATUS2 0xe28 -#define PCIE_REG_PHB_DEBUG_CONTROL3 0xe30 -#define PCIE_REG_PHB_DEBUG_STATUS3 0xe38 -#define PCIE_REG_PHB_DEBUG_CONTROL4 0xe40 -#define PCIE_REG_PHB_DEBUG_STATUS4 0xe48 -#define PCIE_REG_PHB_DEBUG_CONTROL5 0xe50 -#define PCIE_REG_PHB_DEBUG_STATUS5 0xe58 -#define PCIE_REG_PHB_DEBUG_CONTROL6 0xe60 -#define PCIE_REG_PHB_DEBUG_STATUS6 0xe68 - -/* Definition for PCIe errors */ -struct wsp_pcie_err_log_data { - __u64 phb_err; - __u64 phb_err1; - __u64 phb_log0; - __u64 phb_log1; - __u64 mmio_err; - __u64 mmio_err1; - __u64 mmio_log0; - __u64 mmio_log1; - __u64 dma_err; - __u64 dma_err1; - __u64 dma_log0; - __u64 dma_log1; - __u64 utl_sys_err; - __u64 utl_port_err; - __u64 utl_rc_err; - __u64 unused; -}; - -#endif /* __WSP_PCI_H */ |