diff options
| -rw-r--r-- | arch/arm/boot/dts/broadcom/bcm28155-ap.dts | 94 |
1 files changed, 47 insertions, 47 deletions
diff --git a/arch/arm/boot/dts/broadcom/bcm28155-ap.dts b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts index 0a8ad1d673d8..2f3634545e64 100644 --- a/arch/arm/boot/dts/broadcom/bcm28155-ap.dts +++ b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts @@ -15,64 +15,64 @@ device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; +}; - serial@3e000000 { - status = "okay"; - }; - - i2c@3e016000 { - clock-frequency = <400000>; - status = "okay"; - }; +&bsc1 { + clock-frequency = <400000>; + status = "okay"; +}; - i2c@3e017000 { - clock-frequency = <400000>; - status = "okay"; - }; +&bsc2 { + clock-frequency = <400000>; + status = "okay"; +}; - i2c@3e018000 { - clock-frequency = <400000>; - status = "okay"; - }; +&bsc3 { + clock-frequency = <400000>; + status = "okay"; +}; - i2c@3500d000 { - clock-frequency = <100000>; - status = "okay"; +&pmu_bsc { + clock-frequency = <100000>; + status = "okay"; - pmu: pmu@8 { - reg = <0x08>; - }; + pmu: pmu@8 { + reg = <0x08>; }; +}; - sdio2: mmc@3f190000 { - non-removable; - max-frequency = <48000000>; - vmmc-supply = <&camldo1_reg>; - vqmmc-supply = <&iosr1_reg>; - status = "okay"; - }; +&pwm { + status = "okay"; +}; - sdio4: mmc@3f1b0000 { - max-frequency = <48000000>; - cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - vmmc-supply = <&sdldo_reg>; - vqmmc-supply = <&sdxldo_reg>; - status = "okay"; - }; +&sdio2 { + non-removable; + max-frequency = <48000000>; + vmmc-supply = <&camldo1_reg>; + vqmmc-supply = <&iosr1_reg>; + status = "okay"; +}; - pwm: pwm@3e01a000 { - status = "okay"; - }; +&sdio4 { + max-frequency = <48000000>; + cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + vmmc-supply = <&sdldo_reg>; + vqmmc-supply = <&sdxldo_reg>; + status = "okay"; +}; - usbotg: usb@3f120000 { - vusb_d-supply = <&usbldo_reg>; - vusb_a-supply = <&iosr1_reg>; - status = "okay"; - }; +&uartb { + status = "okay"; +}; - usbphy: usb-phy@3f130000 { - status = "okay"; - }; +&usbotg { + vusb_d-supply = <&usbldo_reg>; + vusb_a-supply = <&iosr1_reg>; + status = "okay"; +}; + +&usbphy { + status = "okay"; }; #include "bcm59056.dtsi" |