diff options
18 files changed, 757 insertions, 639 deletions
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt index 56f442374383..1d7e49167666 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt @@ -11,7 +11,7 @@ Required properties: - None Optional properties: -- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt for +- operating-points: Refer to Documentation/devicetree/bindings/opp/opp-v1.yaml for details. OPPs *must* be supplied either via DT, i.e. this property, or populated at runtime. - clock-latency: Specify the possible maximum transition latency for clock, diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt index ef68711716fb..b8233ec91d3d 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt @@ -10,7 +10,7 @@ Required properties: transition and not stable yet. Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for generic clock consumer properties. -- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt +- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp-v2.yaml for detail. - proc-supply: Regulator for Vproc of CPU cluster. diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt index d91a02a3b6b0..6b0b452acef0 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt @@ -6,8 +6,6 @@ from the SoC, then supplies the OPP framework with 'prop' and 'supported hardware' information respectively. The framework is then able to read the DT and operate in the usual way. -For more information about the expected DT format [See: ../opp/opp.txt]. - Frequency Scaling only ---------------------- @@ -15,7 +13,7 @@ No vendor specific driver required for this. Located in CPU's node: -- operating-points : [See: ../power/opp.txt] +- operating-points : [See: ../power/opp-v1.yaml] Example [safe] -------------- @@ -37,7 +35,7 @@ This requires the ST CPUFreq driver to supply 'process' and 'version' info. Located in CPU's node: -- operating-points-v2 : [See ../power/opp.txt] +- operating-points-v2 : [See ../power/opp-v2.yaml] Example [unsafe] ---------------- diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt index 52a24b82fd86..bdbfd7c36101 100644 --- a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt +++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt @@ -4,7 +4,7 @@ Binding for NVIDIA Tegra20 CPUFreq Required properties: - clocks: Must contain an entry for the CPU clock. See ../clocks/clock-bindings.txt for details. -- operating-points-v2: See ../bindings/opp/opp.txt for details. +- operating-points-v2: See ../bindings/opp/opp-v2.yaml for details. - #cooling-cells: Should be 2. See ../thermal/thermal-cooling-devices.yaml for details. For each opp entry in 'operating-points-v2' table: diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt index ac189dd82b08..3fbeb3733c48 100644 --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt @@ -8,7 +8,7 @@ Required properties: - clocks: Phandles for clock specified in "clock-names" property - clock-names : The name of clock used by the DFI, must be "pclk_ddr_mon"; -- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp.txt +- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp-v2.yaml for details. - center-supply: DMC supply node. - status: Marks the node enabled/disabled. diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index 0f73f436bea7..4bea51d1e7ea 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -136,7 +136,7 @@ examples: resets = <&reset 0>, <&reset 1>; }; - gpu_opp_table: opp_table0 { + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-533000000 { diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index 696c17aedbbe..d209f272625d 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -160,7 +160,7 @@ examples: #cooling-cells = <2>; }; - gpu_opp_table: opp_table0 { + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-533000000 { diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml index a8873739d61a..b8204ed22dd5 100644 --- a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml +++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml @@ -81,10 +81,10 @@ examples: noc_opp_table: opp-table { compatible = "operating-points-v2"; - opp-133M { + opp-133333333 { opp-hz = /bits/ 64 <133333333>; }; - opp-800M { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; }; }; diff --git a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml index aeff2bd774dd..729ae97b63d9 100644 --- a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml +++ b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml @@ -18,6 +18,9 @@ description: | sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to provide the OPP framework with required information. +allOf: + - $ref: opp-v2-base.yaml# + properties: compatible: const: allwinner,sun50i-h6-operating-points @@ -43,6 +46,7 @@ patternProperties: properties: opp-hz: true + clock-latency-ns: true patternProperties: "opp-microvolt-.*": true diff --git a/Documentation/devicetree/bindings/opp/opp-v1.yaml b/Documentation/devicetree/bindings/opp/opp-v1.yaml new file mode 100644 index 000000000000..d585d536a3fb --- /dev/null +++ b/Documentation/devicetree/bindings/opp/opp-v1.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/opp-v1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic OPP (Operating Performance Points) v1 Bindings + +maintainers: + - Viresh Kumar <viresh.kumar@linaro.org> + +description: |+ + Devices work at voltage-current-frequency combinations and some implementations + have the liberty of choosing these. These combinations are called Operating + Performance Points aka OPPs. This document defines bindings for these OPPs + applicable across wide range of devices. For illustration purpose, this document + uses CPU as a device. + + This binding only supports voltage-frequency pairs. + +select: true + +properties: + operating-points: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: Frequency in kHz + - description: Voltage for OPP in uV + + +additionalProperties: true +examples: + - | + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = + /* kHz uV */ + <792000 1100000>, + <396000 950000>, + <198000 850000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml new file mode 100644 index 000000000000..ae3ae4d39843 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml @@ -0,0 +1,214 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/opp-v2-base.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic OPP (Operating Performance Points) Common Binding + +maintainers: + - Viresh Kumar <viresh.kumar@linaro.org> + +description: | + Devices work at voltage-current-frequency combinations and some implementations + have the liberty of choosing these. These combinations are called Operating + Performance Points aka OPPs. This document defines bindings for these OPPs + applicable across wide range of devices. For illustration purpose, this document + uses CPU as a device. + + This describes the OPPs belonging to a device. + +select: false + +properties: + $nodename: + pattern: '^opp-table(-[a-z0-9]+)?$' + + opp-shared: + description: + Indicates that device nodes using this OPP Table Node's phandle switch + their DVFS state together, i.e. they share clock/voltage/current lines. + Missing property means devices have independent clock/voltage/current + lines, but they share OPP tables. + type: boolean + +patternProperties: + '^opp-?[0-9]+$': + type: object + description: + One or more OPP nodes describing voltage-current-frequency combinations. + Their name isn't significant but their phandle can be used to reference an + OPP. These are mandatory except for the case where the OPP table is + present only to indicate dependency between devices using the opp-shared + property. + + properties: + opp-hz: + description: + Frequency in Hz, expressed as a 64-bit big-endian integer. This is a + required property for all device nodes, unless another "required" + property to uniquely identify the OPP nodes exists. Devices like power + domains must have another (implementation dependent) property. + + opp-microvolt: + description: | + Voltage for the OPP + + A single regulator's voltage is specified with an array of size one or three. + Single entry is for target voltage and three entries are for <target min max> + voltages. + + Entries for multiple regulators shall be provided in the same field separated + by angular brackets <>. The OPP binding doesn't provide any provisions to + relate the values to their power supplies or the order in which the supplies + need to be configured and that is left for the implementation specific + binding. + + Entries for all regulators shall be of the same size, i.e. either all use a + single value or triplets. + minItems: 1 + maxItems: 8 # Should be enough regulators + items: + minItems: 1 + maxItems: 3 + + opp-microamp: + description: | + The maximum current drawn by the device in microamperes considering + system specific parameters (such as transients, process, aging, + maximum operating temperature range etc.) as necessary. This may be + used to set the most efficient regulator operating mode. + + Should only be set if opp-microvolt or opp-microvolt-<name> is set for + the OPP. + + Entries for multiple regulators shall be provided in the same field + separated by angular brackets <>. If current values aren't required + for a regulator, then it shall be filled with 0. If current values + aren't required for any of the regulators, then this field is not + required. The OPP binding doesn't provide any provisions to relate the + values to their power supplies or the order in which the supplies need + to be configured and that is left for the implementation specific + binding. + minItems: 1 + maxItems: 8 # Should be enough regulators + + opp-level: + description: + A value representing the performance level of the device. + $ref: /schemas/types.yaml#/definitions/uint32 + + opp-peak-kBps: + description: + Peak bandwidth in kilobytes per second, expressed as an array of + 32-bit big-endian integers. Each element of the array represents the + peak bandwidth value of each interconnect path. The number of elements + should match the number of interconnect paths. + minItems: 1 + maxItems: 32 # Should be enough + + opp-avg-kBps: + description: + Average bandwidth in kilobytes per second, expressed as an array + of 32-bit big-endian integers. Each element of the array represents the + average bandwidth value of each interconnect path. The number of elements + should match the number of interconnect paths. This property is only + meaningful in OPP tables where opp-peak-kBps is present. + minItems: 1 + maxItems: 32 # Should be enough + + clock-latency-ns: + description: + Specifies the maximum possible transition latency (in nanoseconds) for + switching to this OPP from any other OPP. + + turbo-mode: + description: + Marks the OPP to be used only for turbo modes. Turbo mode is available + on some platforms, where the device can run over its operating + frequency for a short duration of time limited by the device's power, + current and thermal limits. + type: boolean + + opp-suspend: + description: + Marks the OPP to be used during device suspend. If multiple OPPs in + the table have this, the OPP with highest opp-hz will be used. + type: boolean + + opp-supported-hw: + description: | + This property allows a platform to enable only a subset of the OPPs + from the larger set present in the OPP table, based on the current + version of the hardware (already known to the operating system). + + Each block present in the array of blocks in this property, represents + a sub-group of hardware versions supported by the OPP. i.e. <sub-group + A>, <sub-group B>, etc. The OPP will be enabled if _any_ of these + sub-groups match the hardware's version. + + Each sub-group is a platform defined array representing the hierarchy + of hardware versions supported by the platform. For a platform with + three hierarchical levels of version (X.Y.Z), this field shall look + like + + opp-supported-hw = <X1 Y1 Z1>, <X2 Y2 Z2>, <X3 Y3 Z3>. + + Each level (eg. X1) in version hierarchy is represented by a 32 bit + value, one bit per version and so there can be maximum 32 versions per + level. Logical AND (&) operation is performed for each level with the + hardware's level version and a non-zero output for _all_ the levels in + a sub-group means the OPP is supported by hardware. A value of + 0xFFFFFFFF for each level in the sub-group will enable the OPP for all + versions for the hardware. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + maxItems: 32 + items: + minItems: 1 + maxItems: 4 + + required-opps: + description: + This contains phandle to an OPP node in another device's OPP table. It + may contain an array of phandles, where each phandle points to an OPP + of a different device. It should not contain multiple phandles to the + OPP nodes in the same OPP table. This specifies the minimum required + OPP of the device(s), whose OPP's phandle is present in this property, + for the functioning of the current device at the current OPP (where + this property is present). + $ref: /schemas/types.yaml#/definitions/phandle-array + + patternProperties: + '^opp-microvolt-': + description: + Named opp-microvolt property. This is exactly similar to the above + opp-microvolt property, but allows multiple voltage ranges to be + provided for the same OPP. At runtime, the platform can pick a <name> + and matching opp-microvolt-<name> property will be enabled for all + OPPs. If the platform doesn't pick a specific <name> or the <name> + doesn't match with any opp-microvolt-<name> properties, then + opp-microvolt property shall be used, if present. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 8 # Should be enough regulators + items: + minItems: 1 + maxItems: 3 + + '^opp-microamp-': + description: + Named opp-microamp property. Similar to opp-microvolt-<name> property, + but for microamp instead. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 # Should be enough regulators + + dependencies: + opp-avg-kBps: [ opp-peak-kBps ] + +required: + - compatible + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/opp/opp-v2.yaml b/Documentation/devicetree/bindings/opp/opp-v2.yaml new file mode 100644 index 000000000000..eaf8fba2c691 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/opp-v2.yaml @@ -0,0 +1,475 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/opp-v2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic OPP (Operating Performance Points) Bindings + +maintainers: + - Viresh Kumar <viresh.kumar@linaro.org> + +allOf: + - $ref: opp-v2-base.yaml# + +properties: + compatible: + const: operating-points-v2 + +unevaluatedProperties: false + +examples: + - | + /* + * Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states + * together. + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cpu0_opp_table0>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cpu0_opp_table0>; + }; + }; + + cpu0_opp_table0: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <975000 970000 985000>; + opp-microamp = <70000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1000000 980000 1010000>; + opp-microamp = <80000>; + clock-latency-ns = <310000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <290000>; + turbo-mode; + }; + }; + + - | + /* + * Example 2: Single cluster, Quad-core Qualcom-krait, switches DVFS states + * independently. + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,krait"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cpu_opp_table>; + }; + + cpu@1 { + compatible = "qcom,krait"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + clocks = <&clk_controller 1>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply1>; + operating-points-v2 = <&cpu_opp_table>; + }; + + cpu@2 { + compatible = "qcom,krait"; + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2>; + clocks = <&clk_controller 2>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply2>; + operating-points-v2 = <&cpu_opp_table>; + }; + + cpu@3 { + compatible = "qcom,krait"; + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2>; + clocks = <&clk_controller 3>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply3>; + operating-points-v2 = <&cpu_opp_table>; + }; + }; + + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* + * Missing opp-shared property means CPUs switch DVFS states + * independently. + */ + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <975000 970000 985000>; + opp-microamp = <70000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1000000 980000 1010000>; + opp-microamp = <80000>; + clock-latency-ns = <310000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1025000>; + opp-microamp = <90000>; + lock-latency-ns = <290000>; + turbo-mode; + }; + }; + + - | + /* + * Example 3: Dual-cluster, Dual-core per cluster. CPUs within a cluster switch + * DVFS state together. + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu@100 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <100>; + next-level-cache = <&L2>; + clocks = <&clk_controller 1>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply1>; + operating-points-v2 = <&cluster1_opp>; + }; + + cpu@101 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <101>; + next-level-cache = <&L2>; + clocks = <&clk_controller 1>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply1>; + operating-points-v2 = <&cluster1_opp>; + }; + }; + + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <975000 970000 985000>; + opp-microamp = <70000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1000000 980000 1010000>; + opp-microamp = <80000>; + clock-latency-ns = <310000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1025000>; + opp-microamp = <90000>; + clock-latency-ns = <290000>; + turbo-mode; + }; + }; + + cluster1_opp: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1050000 1045000 1055000>; + opp-microamp = <95000>; + clock-latency-ns = <400000>; + opp-suspend; + }; + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1075000>; + opp-microamp = <100000>; + clock-latency-ns = <400000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1100000 1010000 1110000>; + opp-microamp = <95000>; + clock-latency-ns = <400000>; + turbo-mode; + }; + }; + + - | + /* Example 4: Handling multiple regulators */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "foo,cpu-type"; + device_type = "cpu"; + reg = <0>; + + vcc0-supply = <&cpu_supply0>; + vcc1-supply = <&cpu_supply1>; + vcc2-supply = <&cpu_supply2>; + operating-points-v2 = <&cpu0_opp_table4>; + }; + }; + + cpu0_opp_table4: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <970000>, /* Supply 0 */ + <960000>, /* Supply 1 */ + <960000>; /* Supply 2 */ + opp-microamp = <70000>, /* Supply 0 */ + <70000>, /* Supply 1 */ + <70000>; /* Supply 2 */ + clock-latency-ns = <300000>; + }; + + /* OR */ + + opp-1000000001 { + opp-hz = /bits/ 64 <1000000001>; + opp-microvolt = <975000 970000 985000>, /* Supply 0 */ + <965000 960000 975000>, /* Supply 1 */ + <965000 960000 975000>; /* Supply 2 */ + opp-microamp = <70000>, /* Supply 0 */ + <70000>, /* Supply 1 */ + <70000>; /* Supply 2 */ + clock-latency-ns = <300000>; + }; + + /* OR */ + + opp-1000000002 { + opp-hz = /bits/ 64 <1000000002>; + opp-microvolt = <975000 970000 985000>, /* Supply 0 */ + <965000 960000 975000>, /* Supply 1 */ + <965000 960000 975000>; /* Supply 2 */ + opp-microamp = <70000>, /* Supply 0 */ + <0>, /* Supply 1 doesn't need this */ + <70000>; /* Supply 2 */ + clock-latency-ns = <300000>; + }; + }; + + - | + /* + * Example 5: opp-supported-hw + * (example: three level hierarchy of versions: cuts, substrate and process) + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + cpu-supply = <&cpu_supply>; + operating-points-v2 = <&cpu0_opp_table_slow>; + }; + }; + + cpu0_opp_table_slow: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-600000000 { + /* + * Supports all substrate and process versions for 0xF + * cuts, i.e. only first four cuts. + */ + opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>; + opp-hz = /bits/ 64 <600000000>; + }; + + opp-800000000 { + /* + * Supports: + * - cuts: only one, 6th cut (represented by 6th bit). + * - substrate: supports 16 different substrate versions + * - process: supports 9 different process versions + */ + opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>; + opp-hz = /bits/ 64 <800000000>; + }; + + opp-900000000 { + /* + * Supports: + * - All cuts and substrate where process version is 0x2. + * - All cuts and process where substrate version is 0x2. + */ + opp-supported-hw = <0xFFFFFFFF 0xFFFFFFFF 0x02>, + <0xFFFFFFFF 0x01 0xFFFFFFFF>; + opp-hz = /bits/ 64 <900000000>; + }; + }; + + - | + /* + * Example 6: opp-microvolt-<name>, opp-microamp-<name>: + * (example: device with two possible microvolt ranges: slow and fast) + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + operating-points-v2 = <&cpu0_opp_table6>; + }; + }; + + cpu0_opp_table6: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt-slow = <915000 900000 925000>; + opp-microvolt-fast = <975000 970000 985000>; + opp-microamp-slow = <70000>; + opp-microamp-fast = <71000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */ + <925000 910000 935000>; /* Supply vcc1 */ + opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */ + <965000 960000 975000>; /* Supply vcc1 */ + opp-microamp = <70000>; /* Will be used for both slow/fast */ + }; + }; + + - | + /* + * Example 7: Single cluster Quad-core ARM cortex A53, OPP points from firmware, + * distinct clock controls but two sets of clock/voltage/current lines. + */ + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x100>; + next-level-cache = <&A53_L2>; + clocks = <&dvfs_controller 0>; + operating-points-v2 = <&cpu_opp0_table>; + }; + cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x101>; + next-level-cache = <&A53_L2>; + clocks = <&dvfs_controller 1>; + operating-points-v2 = <&cpu_opp0_table>; + }; + cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x102>; + next-level-cache = <&A53_L2>; + clocks = <&dvfs_controller 2>; + operating-points-v2 = <&cpu_opp1_table>; + }; + cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x103>; + next-level-cache = <&A53_L2>; + clocks = <&dvfs_controller 3>; + operating-points-v2 = <&cpu_opp1_table>; + }; + + }; + + cpu_opp0_table: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + }; + + cpu_opp1_table: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + }; +... diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt deleted file mode 100644 index 08b3da4736cf..000000000000 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ /dev/null @@ -1,622 +0,0 @@ -Generic OPP (Operating Performance Points) Bindings ----------------------------------------------------- - -Devices work at voltage-current-frequency combinations and some implementations -have the liberty of choosing these. These combinations are called Operating -Performance Points aka OPPs. This document defines bindings for these OPPs -applicable across wide range of devices. For illustration purpose, this document -uses CPU as a device. - -This document contain multiple versions of OPP binding and only one of them -should be used per device. - -Binding 1: operating-points -============================ - -This binding only supports voltage-frequency pairs. - -Properties: -- operating-points: An array of 2-tuples items, and each item consists - of frequency and voltage like <freq-kHz vol-uV>. - freq: clock frequency in kHz - vol: voltage in microvolt - -Examples: - -cpu@0 { - compatible = "arm,cortex-a9"; - reg = <0>; - next-level-cache = <&L2>; - operating-points = < - /* kHz uV */ - 792000 1100000 - 396000 950000 - 198000 850000 - >; -}; - - -Binding 2: operating-points-v2 -============================ - -* Property: operating-points-v2 - -Devices supporting OPPs must set their "operating-points-v2" property with -phandle to a OPP table in their DT node. The OPP core will use this phandle to -find the operating points for the device. - -This can contain more than one phandle for power domain providers that provide -multiple power domains. That is, one phandle for each power domain. If only one -phandle is available, then the same OPP table will be used for all power domains -provided by the power domain provider. - -If required, this can be extended for SoC vendor specific bindings. Such bindings -should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt -and should have a compatible description like: "operating-points-v2-<vendor>". - -* OPP Table Node - -This describes the OPPs belonging to a device. This node can have following -properties: - -Required properties: -- compatible: Allow OPPs to express their compatibility. It should be: - "operating-points-v2". - -- OPP nodes: One or more OPP nodes describing voltage-current-frequency - combinations. Their name isn't significant but their phandle can be used to - reference an OPP. These are mandatory except for the case where the OPP table - is present only to indicate dependency between devices using the opp-shared - property. - -Optional properties: -- opp-shared: Indicates that device nodes using this OPP Table Node's phandle - switch their DVFS state together, i.e. they share clock/voltage/current lines. - Missing property means devices have independent clock/voltage/current lines, - but they share OPP tables. - -- status: Marks the OPP table enabled/disabled. - - -* OPP Node - -This defines voltage-current-frequency combinations along with other related -properties. - -Required properties: -- opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. This is a - required property for all device nodes, unless another "required" property to - uniquely identify the OPP nodes exists. Devices like power domains must have - another (implementation dependent) property. - -- opp-peak-kBps: Peak bandwidth in kilobytes per second, expressed as an array - of 32-bit big-endian integers. Each element of the array represents the - peak bandwidth value of each interconnect path. The number of elements should - match the number of interconnect paths. - -Optional properties: -- opp-microvolt: voltage in micro Volts. - - A single regulator's voltage is specified with an array of size one or three. - Single entry is for target voltage and three entries are for <target min max> - voltages. - - Entries for multiple regulators shall be provided in the same field separated - by angular brackets <>. The OPP binding doesn't provide any provisions to - relate the values to their power supplies or the order in which the supplies - need to be configured and that is left for the implementation specific - binding. - - Entries for all regulators shall be of the same size, i.e. either all use a - single value or triplets. - -- opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to - the above opp-microvolt property, but allows multiple voltage ranges to be - provided for the same OPP. At runtime, the platform can pick a <name> and - matching opp-microvolt-<name> property will be enabled for all OPPs. If the - platform doesn't pick a specific <name> or the <name> doesn't match with any - opp-microvolt-<name> properties, then opp-microvolt property shall be used, if - present. - -- opp-microamp: The maximum current drawn by the device in microamperes - considering system specific parameters (such as transients, process, aging, - maximum operating temperature range etc.) as necessary. This may be used to - set the most efficient regulator operating mode. - - Should only be set if opp-microvolt is set for the OPP. - - Entries for multiple regulators shall be provided in the same field separated - by angular brackets <>. If current values aren't required for a regulator, - then it shall be filled with 0. If current values aren't required for any of - the regulators, then this field is not required. The OPP binding doesn't - provide any provisions to relate the values to their power supplies or the - order in which the supplies need to be configured and that is left for the - implementation specific binding. - -- opp-microamp-<name>: Named opp-microamp property. Similar to - opp-microvolt-<name> property, but for microamp instead. - -- opp-level: A value representing the performance level of the device, - expressed as a 32-bit integer. - -- opp-avg-kBps: Average bandwidth in kilobytes per second, expressed as an array - of 32-bit big-endian integers. Each element of the array represents the - average bandwidth value of each interconnect path. The number of elements - should match the number of interconnect paths. This property is only - meaningful in OPP tables where opp-peak-kBps is present. - -- clock-latency-ns: Specifies the maximum possible transition latency (in - nanoseconds) for switching to this OPP from any other OPP. - -- turbo-mode: Marks the OPP to be used only for turbo modes. Turbo mode is - available on some platforms, where the device can run over its operating - frequency for a short duration of time limited by the device's power, current - and thermal limits. - -- opp-suspend: Marks the OPP to be used during device suspend. If multiple OPPs - in the table have this, the OPP with highest opp-hz will be used. - -- opp-supported-hw: This property allows a platform to enable only a subset of - the OPPs from the larger set present in the OPP table, based on the current - version of the hardware (already known to the operating system). - - Each block present in the array of blocks in this property, represents a - sub-group of hardware versions supported by the OPP. i.e. <sub-group A>, - <sub-group B>, etc. The OPP will be enabled if _any_ of these sub-groups match - the hardware's version. - - Each sub-group is a platform defined array representing the hierarchy of - hardware versions supported by the platform. For a platform with three - hierarchical levels of version (X.Y.Z), this field shall look like - - opp-supported-hw = <X1 Y1 Z1>, <X2 Y2 Z2>, <X3 Y3 Z3>. - - Each level (eg. X1) in version hierarchy is represented by a 32 bit value, one - bit per version and so there can be maximum 32 versions per level. Logical AND - (&) operation is performed for each level with the hardware's level version - and a non-zero output for _all_ the levels in a sub-group means the OPP is - supported by hardware. A value of 0xFFFFFFFF for each level in the sub-group - will enable the OPP for all versions for the hardware. - -- status: Marks the node enabled/disabled. - -- required-opps: This contains phandle to an OPP node in another device's OPP - table. It may contain an array of phandles, where each phandle points to an - OPP of a different device. It should not contain multiple phandles to the OPP - nodes in the same OPP table. This specifies the minimum required OPP of the - device(s), whose OPP's phandle is present in this property, for the - functioning of the current device at the current OPP (where this property is - present). - -Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together. - -/ { - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a9"; - reg = <0>; - next-level-cache = <&L2>; - clocks = <&clk_controller 0>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply0>; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@1 { - compatible = "arm,cortex-a9"; - reg = <1>; - next-level-cache = <&L2>; - clocks = <&clk_controller 0>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply0>; - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <975000 970000 985000>; - opp-microamp = <70000>; - clock-latency-ns = <300000>; - opp-suspend; - }; - opp-1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1000000 980000 1010000>; - opp-microamp = <80000>; - clock-latency-ns = <310000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1025000>; - clock-latency-ns = <290000>; - turbo-mode; - }; - }; -}; - -Example 2: Single cluster, Quad-core Qualcom-krait, switches DVFS states -independently. - -/ { - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "qcom,krait"; - reg = <0>; - next-level-cache = <&L2>; - clocks = <&clk_controller 0>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply0>; - operating-points-v2 = <&cpu_opp_table>; - }; - - cpu@1 { - compatible = "qcom,krait"; - reg = <1>; - next-level-cache = <&L2>; - clocks = <&clk_controller 1>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply1>; - operating-points-v2 = <&cpu_opp_table>; - }; - - cpu@2 { - compatible = "qcom,krait"; - reg = <2>; - next-level-cache = <&L2>; - clocks = <&clk_controller 2>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply2>; - operating-points-v2 = <&cpu_opp_table>; - }; - - cpu@3 { - compatible = "qcom,krait"; - reg = <3>; - next-level-cache = <&L2>; - clocks = <&clk_controller 3>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply3>; - operating-points-v2 = <&cpu_opp_table>; - }; - }; - - cpu_opp_table: opp_table { - compatible = "operating-points-v2"; - - /* - * Missing opp-shared property means CPUs switch DVFS states - * independently. - */ - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <975000 970000 985000>; - opp-microamp = <70000>; - clock-latency-ns = <300000>; - opp-suspend; - }; - opp-1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1000000 980000 1010000>; - opp-microamp = <80000>; - clock-latency-ns = <310000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1025000>; - opp-microamp = <90000; - lock-latency-ns = <290000>; - turbo-mode; - }; - }; -}; - -Example 3: Dual-cluster, Dual-core per cluster. CPUs within a cluster switch -DVFS state together. - -/ { - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a7"; - reg = <0>; - next-level-cache = <&L2>; - clocks = <&clk_controller 0>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply0>; - operating-points-v2 = <&cluster0_opp>; - }; - - cpu@1 { - compatible = "arm,cortex-a7"; - reg = <1>; - next-level-cache = <&L2>; - clocks = <&clk_controller 0>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply0>; - operating-points-v2 = <&cluster0_opp>; - }; - - cpu@100 { - compatible = "arm,cortex-a15"; - reg = <100>; - next-level-cache = <&L2>; - clocks = <&clk_controller 1>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply1>; - operating-points-v2 = <&cluster1_opp>; - }; - - cpu@101 { - compatible = "arm,cortex-a15"; - reg = <101>; - next-level-cache = <&L2>; - clocks = <&clk_controller 1>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply1>; - operating-points-v2 = <&cluster1_opp>; - }; - }; - - cluster0_opp: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <975000 970000 985000>; - opp-microamp = <70000>; - clock-latency-ns = <300000>; - opp-suspend; - }; - opp-1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1000000 980000 1010000>; - opp-microamp = <80000>; - clock-latency-ns = <310000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1025000>; - opp-microamp = <90000>; - clock-latency-ns = <290000>; - turbo-mode; - }; - }; - - cluster1_opp: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; - - opp-1300000000 { - opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1050000 1045000 1055000>; - opp-microamp = <95000>; - clock-latency-ns = <400000>; - opp-suspend; - }; - opp-1400000000 { - opp-hz = /bits/ 64 <1400000000>; - opp-microvolt = <1075000>; - opp-microamp = <100000>; - clock-latency-ns = <400000>; - }; - opp-1500000000 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <1100000 1010000 1110000>; - opp-microamp = <95000>; - clock-latency-ns = <400000>; - turbo-mode; - }; - }; -}; - -Example 4: Handling multiple regulators - -/ { - cpus { - cpu@0 { - compatible = "vendor,cpu-type"; - ... - - vcc0-supply = <&cpu_supply0>; - vcc1-supply = <&cpu_supply1>; - vcc2-supply = <&cpu_supply2>; - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <970000>, /* Supply 0 */ - <960000>, /* Supply 1 */ - <960000>; /* Supply 2 */ - opp-microamp = <70000>, /* Supply 0 */ - <70000>, /* Supply 1 */ - <70000>; /* Supply 2 */ - clock-latency-ns = <300000>; - }; - - /* OR */ - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <975000 970000 985000>, /* Supply 0 */ - <965000 960000 975000>, /* Supply 1 */ - <965000 960000 975000>; /* Supply 2 */ - opp-microamp = <70000>, /* Supply 0 */ - <70000>, /* Supply 1 */ - <70000>; /* Supply 2 */ - clock-latency-ns = <300000>; - }; - - /* OR */ - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <975000 970000 985000>, /* Supply 0 */ - <965000 960000 975000>, /* Supply 1 */ - <965000 960000 975000>; /* Supply 2 */ - opp-microamp = <70000>, /* Supply 0 */ - <0>, /* Supply 1 doesn't need this */ - <70000>; /* Supply 2 */ - clock-latency-ns = <300000>; - }; - }; -}; - -Example 5: opp-supported-hw -(example: three level hierarchy of versions: cuts, substrate and process) - -/ { - cpus { - cpu@0 { - compatible = "arm,cortex-a7"; - ... - - cpu-supply = <&cpu_supply> - operating-points-v2 = <&cpu0_opp_table_slow>; - }; - }; - - opp_table { - compatible = "operating-points-v2"; - opp-shared; - - opp-600000000 { - /* - * Supports all substrate and process versions for 0xF - * cuts, i.e. only first four cuts. - */ - opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF> - opp-hz = /bits/ 64 <600000000>; - ... - }; - - opp-800000000 { - /* - * Supports: - * - cuts: only one, 6th cut (represented by 6th bit). - * - substrate: supports 16 different substrate versions - * - process: supports 9 different process versions - */ - opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0> - opp-hz = /bits/ 64 <800000000>; - ... - }; - - opp-900000000 { - /* - * Supports: - * - All cuts and substrate where process version is 0x2. - * - All cuts and process where substrate version is 0x2. - */ - opp-supported-hw = <0xFFFFFFFF 0xFFFFFFFF 0x02>, <0xFFFFFFFF 0x01 0xFFFFFFFF> - opp-hz = /bits/ 64 <900000000>; - ... - }; - }; -}; - -Example 6: opp-microvolt-<name>, opp-microamp-<name>: -(example: device with two possible microvolt ranges: slow and fast) - -/ { - cpus { - cpu@0 { - compatible = "arm,cortex-a7"; - ... - - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt-slow = <915000 900000 925000>; - opp-microvolt-fast = <975000 970000 985000>; - opp-microamp-slow = <70000>; - opp-microamp-fast = <71000>; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */ - <925000 910000 935000>; /* Supply vcc1 */ - opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */ - <965000 960000 975000>; /* Supply vcc1 */ - opp-microamp = <70000>; /* Will be used for both slow/fast */ - }; - }; -}; - -Example 7: Single cluster Quad-core ARM cortex A53, OPP points from firmware, -distinct clock controls but two sets of clock/voltage/current lines. - -/ { - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a53"; - reg = <0x0 0x100>; - next-level-cache = <&A53_L2>; - clocks = <&dvfs_controller 0>; - operating-points-v2 = <&cpu_opp0_table>; - }; - cpu@1 { - compatible = "arm,cortex-a53"; - reg = <0x0 0x101>; - next-level-cache = <&A53_L2>; - clocks = <&dvfs_controller 1>; - operating-points-v2 = <&cpu_opp0_table>; - }; - cpu@2 { - compatible = "arm,cortex-a53"; - reg = <0x0 0x102>; - next-level-cache = <&A53_L2>; - clocks = <&dvfs_controller 2>; - operating-points-v2 = <&cpu_opp1_table>; - }; - cpu@3 { - compatible = "arm,cortex-a53"; - reg = <0x0 0x103>; - next-level-cache = <&A53_L2>; - clocks = <&dvfs_controller 3>; - operating-points-v2 = <&cpu_opp1_table>; - }; - - }; - - cpu_opp0_table: opp0_table { - compatible = "operating-points-v2"; - opp-shared; - }; - - cpu_opp1_table: opp1_table { - compatible = "operating-points-v2"; - opp-shared; - }; -}; diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt index 32eb0793c7e6..41d3e4ff2dc3 100644 --- a/Documentation/devicetree/bindings/opp/qcom-opp.txt +++ b/Documentation/devicetree/bindings/opp/qcom-opp.txt @@ -1,7 +1,7 @@ Qualcomm OPP bindings to describe OPP nodes The bindings are based on top of the operating-points-v2 bindings -described in Documentation/devicetree/bindings/opp/opp.txt +described in Documentation/devicetree/bindings/opp/opp-v2-base.yaml Additional properties are described below. * OPP Table Node diff --git a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt index 832346e489a3..b70d326117cd 100644 --- a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt +++ b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt @@ -13,7 +13,7 @@ regulators to the device that will undergo OPP transitions we can make use of the multi regulator binding that is part of the OPP core described here [1] to describe both regulators needed by the platform. -[1] Documentation/devicetree/bindings/opp/opp.txt +[1] Documentation/devicetree/bindings/opp/opp-v2.yaml Required Properties for Device Node: - vdd-supply: phandle to regulator controlling VDD supply diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml index aed51e9dcb11..3143ed9a3313 100644 --- a/Documentation/devicetree/bindings/power/power-domain.yaml +++ b/Documentation/devicetree/bindings/power/power-domain.yaml @@ -46,7 +46,7 @@ properties: Phandles to the OPP tables of power domains provided by a power domain provider. If the provider provides a single power domain only or all the power domains provided by the provider have identical OPP tables, - then this shall contain a single phandle. Refer to ../opp/opp.txt + then this shall contain a single phandle. Refer to ../opp/opp-v2-base.yaml for more information. "#power-domain-cells": diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index feaa43b78535..8b8451399784 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -24,7 +24,6 @@ }; }; - /* see Documentation/devicetree/bindings/opp/opp.txt */ cpu0_opp_table: opp-table { compatible = "operating-points-v2-ti-cpu"; syscon = <&scm_conf>; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 20844dbc002e..22b33098b1a2 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -29,7 +29,6 @@ }; }; - /* see Documentation/devicetree/bindings/opp/opp.txt */ cpu0_opp_table: opp-table { compatible = "operating-points-v2-ti-cpu"; syscon = <&scm_conf>; |