diff options
| -rw-r--r-- | sound/usb/mixer_scarlett_gen2.c | 248 |
1 files changed, 241 insertions, 7 deletions
diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c index 279196feb811..ffa2ee8d034c 100644 --- a/sound/usb/mixer_scarlett_gen2.c +++ b/sound/usb/mixer_scarlett_gen2.c @@ -48,8 +48,8 @@ * Support for Solo/2i2 Gen 3 added in May 2021 (thanks to Alexander * Vorona for 2i2 protocol traces). * - * Support for phantom power and direct monitoring added in May-June - * 2021. + * Support for phantom power, direct monitoring, and speaker switching + * added in May-June 2021. * * This ALSA mixer gives access to (model-dependent): * - input, output, mixer-matrix muxes @@ -57,7 +57,7 @@ * - gain/volume/mute controls * - level meters * - line/inst level, pad, and air controls - * - phantom power and direct monitor controls + * - phantom power, direct monitor, and speaker switching controls * - disable/enable MSD mode * * <ditaa> @@ -315,6 +315,9 @@ struct scarlett2_device_info { /* line out hw volume is sw controlled */ u8 line_out_hw_vol; + /* support for main/alt speaker switching */ + u8 has_speaker_switching; + /* the number of analogue inputs with a software switchable * level control that can be set to line or instrument */ @@ -379,6 +382,7 @@ struct scarlett2_data { u8 input_other_updated; u8 monitor_other_updated; u8 mux_updated; + u8 speaker_switching_switched; u8 sync; u8 master_vol; u8 vol[SCARLETT2_ANALOGUE_MAX]; @@ -391,6 +395,7 @@ struct scarlett2_data { u8 phantom_switch[SCARLETT2_PHANTOM_SWITCH_MAX]; u8 phantom_persistence; u8 direct_monitor_switch; + u8 speaker_switching_switch; u8 msd_switch; struct snd_kcontrol *sync_ctl; struct snd_kcontrol *master_vol_ctl; @@ -404,6 +409,7 @@ struct scarlett2_data { struct snd_kcontrol *phantom_ctls[SCARLETT2_PHANTOM_SWITCH_MAX]; struct snd_kcontrol *mux_ctls[SCARLETT2_MUX_MAX]; struct snd_kcontrol *direct_monitor_ctl; + struct snd_kcontrol *speaker_switching_ctl; u8 mux[SCARLETT2_MUX_MAX]; u8 mix[SCARLETT2_INPUT_MIX_MAX * SCARLETT2_OUTPUT_MIX_MAX]; }; @@ -687,6 +693,7 @@ static const struct scarlett2_device_info s18i8_gen3_info = { .has_msd_mode = 1, .has_mixer = 1, .line_out_hw_vol = 1, + .has_speaker_switching = 1, .level_input_count = 2, .pad_input_count = 2, .air_input_count = 4, @@ -756,6 +763,7 @@ static const struct scarlett2_device_info s18i20_gen3_info = { .has_msd_mode = 1, .has_mixer = 1, .line_out_hw_vol = 1, + .has_speaker_switching = 1, .level_input_count = 2, .pad_input_count = 8, .air_input_count = 8, @@ -913,7 +921,9 @@ enum { SCARLETT2_CONFIG_PHANTOM_SWITCH = 8, SCARLETT2_CONFIG_PHANTOM_PERSISTENCE = 9, SCARLETT2_CONFIG_DIRECT_MONITOR = 10, - SCARLETT2_CONFIG_COUNT = 11 + SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH = 11, + SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE = 12, + SCARLETT2_CONFIG_COUNT = 13 }; /* Location, size, and activation command number for the configuration @@ -982,6 +992,12 @@ static const struct scarlett2_config [SCARLETT2_CONFIG_PHANTOM_PERSISTENCE] = { .offset = 0x9e, .size = 8, .activate = 6 }, + + [SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH] = { + .offset = 0x9f, .size = 1, .activate = 10 }, + + [SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE] = { + .offset = 0xa0, .size = 1, .activate = 10 }, } }; /* proprietary request/response format */ @@ -1862,6 +1878,18 @@ static const struct snd_kcontrol_new scarlett2_mute_ctl = { /*** HW/SW Volume Switch Controls ***/ +static void scarlett2_sw_hw_ctl_ro(struct scarlett2_data *private, int index) +{ + private->sw_hw_ctls[index]->vd[0].access &= + ~SNDRV_CTL_ELEM_ACCESS_WRITE; +} + +static void scarlett2_sw_hw_ctl_rw(struct scarlett2_data *private, int index) +{ + private->sw_hw_ctls[index]->vd[0].access |= + SNDRV_CTL_ELEM_ACCESS_WRITE; +} + static int scarlett2_sw_hw_enum_ctl_info(struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) { @@ -2325,6 +2353,13 @@ static int scarlett2_update_monitor_other(struct usb_mixer_interface *mixer) { struct scarlett2_data *private = mixer->private_data; const struct scarlett2_device_info *info = private->info; + int err; + + /* monitor_other_enable[0] enables speaker switching */ + u8 monitor_other_enable[2]; + + /* monitor_other_switch[0] activates the alternate speakers */ + u8 monitor_other_switch[2]; private->monitor_other_updated = 0; @@ -2333,6 +2368,26 @@ static int scarlett2_update_monitor_other(struct usb_mixer_interface *mixer) mixer, SCARLETT2_CONFIG_DIRECT_MONITOR, 1, &private->direct_monitor_switch); + if (!info->has_speaker_switching) + return 0; + + err = scarlett2_usb_get_config( + mixer, SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE, + 2, monitor_other_enable); + if (err < 0) + return err; + + err = scarlett2_usb_get_config( + mixer, SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH, + 2, monitor_other_switch); + if (err < 0) + return err; + + if (!monitor_other_enable[0]) + private->speaker_switching_switch = 0; + else + private->speaker_switching_switch = monitor_other_switch[0] + 1; + return 0; } @@ -2425,6 +2480,151 @@ static int scarlett2_add_direct_monitor_ctl(struct usb_mixer_interface *mixer) &private->direct_monitor_ctl); } +/*** Speaker Switching Control ***/ + +static int scarlett2_speaker_switch_enum_ctl_info( + struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) +{ + static const char *const values[3] = { + "Off", "Main", "Alt" + }; + + return snd_ctl_enum_info(uinfo, 1, 3, values); +} + +static int scarlett2_speaker_switch_enum_ctl_get( + struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) +{ + struct usb_mixer_elem_info *elem = kctl->private_data; + struct usb_mixer_interface *mixer = elem->head.mixer; + struct scarlett2_data *private = mixer->private_data; + + mutex_lock(&private->data_mutex); + if (private->monitor_other_updated) + scarlett2_update_monitor_other(mixer); + ucontrol->value.enumerated.item[0] = private->speaker_switching_switch; + mutex_unlock(&private->data_mutex); + + return 0; +} + +/* when speaker switching gets enabled, switch the main/alt speakers + * to HW volume and disable those controls + */ +static void scarlett2_speaker_switch_enable(struct usb_mixer_interface *mixer) +{ + struct snd_card *card = mixer->chip->card; + struct scarlett2_data *private = mixer->private_data; + int i; + + for (i = 0; i < 4; i++) { + int index = line_out_remap(private, i); + + /* switch the main/alt speakers to HW volume */ + if (!private->vol_sw_hw_switch[index]) + scarlett2_sw_hw_change(private->mixer, i, 1); + + /* disable the line out SW/HW switch */ + scarlett2_sw_hw_ctl_ro(private, i); + snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, + &private->sw_hw_ctls[i]->id); + } + + /* when the next monitor-other notify comes in, update the mux + * configuration + */ + private->speaker_switching_switched = 1; +} + +/* when speaker switching gets disabled, reenable the hw/sw controls + * and invalidate the routing + */ +static void scarlett2_speaker_switch_disable(struct usb_mixer_interface *mixer) +{ + struct snd_card *card = mixer->chip->card; + struct scarlett2_data *private = mixer->private_data; + int i; + + /* enable the line out SW/HW switch */ + for (i = 0; i < 4; i++) { + scarlett2_sw_hw_ctl_rw(private, i); + snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, + &private->sw_hw_ctls[i]->id); + } + + /* when the next monitor-other notify comes in, update the mux + * configuration + */ + private->speaker_switching_switched = 1; +} + +static int scarlett2_speaker_switch_enum_ctl_put( + struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) +{ + struct usb_mixer_elem_info *elem = kctl->private_data; + struct usb_mixer_interface *mixer = elem->head.mixer; + struct scarlett2_data *private = mixer->private_data; + + int oval, val, err = 0; + + mutex_lock(&private->data_mutex); + + oval = private->speaker_switching_switch; + val = min(ucontrol->value.enumerated.item[0], 2U); + + if (oval == val) + goto unlock; + + private->speaker_switching_switch = val; + + /* enable/disable speaker switching */ + err = scarlett2_usb_set_config( + mixer, SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE, + 0, !!val); + if (err < 0) + goto unlock; + + /* if speaker switching is enabled, select main or alt */ + err = scarlett2_usb_set_config( + mixer, SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH, + 0, val == 2); + if (err < 0) + goto unlock; + + /* update controls if speaker switching gets enabled or disabled */ + if (!oval && val) + scarlett2_speaker_switch_enable(mixer); + else if (oval && !val) + scarlett2_speaker_switch_disable(mixer); + +unlock: + mutex_unlock(&private->data_mutex); + return err; +} + +static const struct snd_kcontrol_new scarlett2_speaker_switch_enum_ctl = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "", + .info = scarlett2_speaker_switch_enum_ctl_info, + .get = scarlett2_speaker_switch_enum_ctl_get, + .put = scarlett2_speaker_switch_enum_ctl_put, +}; + +static int scarlett2_add_speaker_switch_ctl( + struct usb_mixer_interface *mixer) +{ + struct scarlett2_data *private = mixer->private_data; + const struct scarlett2_device_info *info = private->info; + + if (!info->has_speaker_switching) + return 0; + + return scarlett2_add_new_ctl( + mixer, &scarlett2_speaker_switch_enum_ctl, + 0, 1, "Speaker Switching Playback Enum", + &private->speaker_switching_ctl); +} + /*** Dim/Mute Controls ***/ static int scarlett2_dim_mute_ctl_get(struct snd_kcontrol *kctl, @@ -2567,6 +2767,12 @@ static int scarlett2_add_line_out_ctls(struct usb_mixer_interface *mixer) &private->sw_hw_ctls[i]); if (err < 0) return err; + + /* Make the switch read-only if the line is + * involved in speaker switching + */ + if (private->speaker_switching_switch && i < 4) + scarlett2_sw_hw_ctl_ro(private, i); } } @@ -3314,18 +3520,41 @@ static void scarlett2_notify_input_other( &private->phantom_ctls[i]->id); } -/* Notify on "monitor other" change (direct monitor) */ +/* Notify on "monitor other" change (direct monitor, speaker switching) */ static void scarlett2_notify_monitor_other( struct usb_mixer_interface *mixer) { - struct scarlett2_data *private = mixer->private_data; struct snd_card *card = mixer->chip->card; + struct scarlett2_data *private = mixer->private_data; + const struct scarlett2_device_info *info = private->info; private->monitor_other_updated = 1; - if (private->info->direct_monitor) + if (info->direct_monitor) { snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &private->direct_monitor_ctl->id); + return; + } + + if (info->has_speaker_switching) + snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, + &private->speaker_switching_ctl->id); + + /* if speaker switching was recently enabled or disabled, + * invalidate the dim/mute and mux enum controls + */ + if (private->speaker_switching_switched) { + int i; + + scarlett2_notify_dim_mute(mixer); + + private->speaker_switching_switched = 0; + private->mux_updated = 1; + + for (i = 0; i < private->num_mux_dsts; i++) + snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, + &private->mux_ctls[i]->id); + } } /* Interrupt callback */ @@ -3461,6 +3690,11 @@ static int snd_scarlett_gen2_controls_create(struct usb_mixer_interface *mixer) if (err < 0) return err; + /* Create the speaker switching control */ + err = scarlett2_add_speaker_switch_ctl(mixer); + if (err < 0) + return err; + /* Set up the interrupt polling */ err = scarlett2_init_notify(mixer); if (err < 0) |