diff options
| -rw-r--r-- | drivers/clocksource/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/clocksource/tcb_clksrc.c | 3 | ||||
| -rw-r--r-- | fs/timerfd.c | 2 | ||||
| -rw-r--r-- | include/linux/hrtimer.h | 34 | ||||
| -rw-r--r-- | kernel/time/hrtimer.c | 55 | ||||
| -rw-r--r-- | kernel/time/itimer.c | 2 | ||||
| -rw-r--r-- | kernel/time/ntp.c | 14 | ||||
| -rw-r--r-- | kernel/time/posix-timers.c | 2 | ||||
| -rw-r--r-- | kernel/time/tick-sched.c | 16 | ||||
| -rw-r--r-- | kernel/time/timer_list.c | 2 | ||||
| -rw-r--r-- | tools/testing/selftests/timers/valid-adjtimex.c | 139 |
11 files changed, 245 insertions, 36 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 56777f04d2d9..33db7406c0e2 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -30,6 +30,8 @@ config CLKSRC_MMIO config DIGICOLOR_TIMER bool "Digicolor timer driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + select CLKSRC_MMIO + depends on HAS_IOMEM help Enables the support for the digicolor timer driver. @@ -55,6 +57,7 @@ config ARMADA_370_XP_TIMER bool "Armada 370 and XP timer driver" if COMPILE_TEST depends on ARM select CLKSRC_OF + select CLKSRC_MMIO help Enables the support for the Armada 370 and XP timer driver. @@ -76,6 +79,7 @@ config ORION_TIMER config SUN4I_TIMER bool "Sun4i timer driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM select CLKSRC_MMIO help Enables support for the Sun4i timer. @@ -89,6 +93,7 @@ config SUN5I_HSTIMER config TEGRA_TIMER bool "Tegra timer driver" if COMPILE_TEST + select CLKSRC_MMIO depends on ARM help Enables support for the Tegra driver. @@ -96,6 +101,7 @@ config TEGRA_TIMER config VT8500_TIMER bool "VT8500 timer driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM help Enables support for the VT8500 driver. @@ -131,6 +137,7 @@ config CLKSRC_NOMADIK_MTU_SCHED_CLOCK config CLKSRC_DBX500_PRCMU bool "Clocksource PRCMU Timer" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM help Use the always on PRCMU Timer as clocksource @@ -248,6 +255,7 @@ config CLKSRC_EXYNOS_MCT config CLKSRC_SAMSUNG_PWM bool "PWM timer drvier for Samsung S3C, S5P" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM help This is a new clocksource driver for the PWM timer found in Samsung S3C, S5P and Exynos SoCs, replacing an earlier driver @@ -257,12 +265,14 @@ config CLKSRC_SAMSUNG_PWM config FSL_FTM_TIMER bool "Freescale FlexTimer Module driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM select CLKSRC_MMIO help Support for Freescale FlexTimer Module (FTM) timer. config VF_PIT_TIMER bool + select CLKSRC_MMIO help Support for Period Interrupt Timer on Freescale Vybrid Family SoCs. @@ -360,6 +370,7 @@ config CLKSRC_TANGO_XTAL config CLKSRC_PXA bool "Clocksource for PXA or SA-11x0 platform" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM select CLKSRC_MMIO help This enables OST0 support available on PXA and SA-11x0 @@ -394,6 +405,7 @@ config CLKSRC_ST_LPC bool "Low power clocksource found in the LPC" if COMPILE_TEST select CLKSRC_OF if OF depends on HAS_IOMEM + select CLKSRC_MMIO help Enable this option to use the Low Power controller timer as clocksource. diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c index 6ee91401918e..4da2af9694a2 100644 --- a/drivers/clocksource/tcb_clksrc.c +++ b/drivers/clocksource/tcb_clksrc.c @@ -98,7 +98,8 @@ static int tc_shutdown(struct clock_event_device *d) __raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR)); __raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR)); - clk_disable(tcd->clk); + if (!clockevent_state_detached(d)) + clk_disable(tcd->clk); return 0; } diff --git a/fs/timerfd.c b/fs/timerfd.c index b94fa6c3c6eb..053818dd6c18 100644 --- a/fs/timerfd.c +++ b/fs/timerfd.c @@ -153,7 +153,7 @@ static ktime_t timerfd_get_remaining(struct timerfd_ctx *ctx) if (isalarm(ctx)) remaining = alarm_expires_remaining(&ctx->t.alarm); else - remaining = hrtimer_expires_remaining(&ctx->t.tmr); + remaining = hrtimer_expires_remaining_adjusted(&ctx->t.tmr); return remaining.tv64 < 0 ? ktime_set(0, 0): remaining; } diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 76dd4f0da5ca..2ead22dd74a0 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -87,7 +87,8 @@ enum hrtimer_restart { * @function: timer expiry callback function * @base: pointer to the timer base (per cpu and per clock) * @state: state information (See bit values above) - * @start_pid: timer statistics field to store the pid of the task which + * @is_rel: Set if the timer was armed relative + * @start_pid: timer statistics field to store the pid of the task which * started the timer * @start_site: timer statistics field to store the site where the timer * was started @@ -101,7 +102,8 @@ struct hrtimer { ktime_t _softexpires; enum hrtimer_restart (*function)(struct hrtimer *); struct hrtimer_clock_base *base; - unsigned long state; + u8 state; + u8 is_rel; #ifdef CONFIG_TIMER_STATS int start_pid; void *start_site; @@ -321,6 +323,27 @@ static inline void clock_was_set_delayed(void) { } #endif +static inline ktime_t +__hrtimer_expires_remaining_adjusted(const struct hrtimer *timer, ktime_t now) +{ + ktime_t rem = ktime_sub(timer->node.expires, now); + + /* + * Adjust relative timers for the extra we added in + * hrtimer_start_range_ns() to prevent short timeouts. + */ + if (IS_ENABLED(CONFIG_TIME_LOW_RES) && timer->is_rel) + rem.tv64 -= hrtimer_resolution; + return rem; +} + +static inline ktime_t +hrtimer_expires_remaining_adjusted(const struct hrtimer *timer) +{ + return __hrtimer_expires_remaining_adjusted(timer, + timer->base->get_time()); +} + extern void clock_was_set(void); #ifdef CONFIG_TIMERFD extern void timerfd_clock_was_set(void); @@ -390,7 +413,12 @@ static inline void hrtimer_restart(struct hrtimer *timer) } /* Query timers: */ -extern ktime_t hrtimer_get_remaining(const struct hrtimer *timer); +extern ktime_t __hrtimer_get_remaining(const struct hrtimer *timer, bool adjust); + +static inline ktime_t hrtimer_get_remaining(const struct hrtimer *timer) +{ + return __hrtimer_get_remaining(timer, false); +} extern u64 hrtimer_get_next_event(void); diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c index 435b8850dd80..fa909f9fd559 100644 --- a/kernel/time/hrtimer.c +++ b/kernel/time/hrtimer.c @@ -897,10 +897,10 @@ static int enqueue_hrtimer(struct hrtimer *timer, */ static void __remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, - unsigned long newstate, int reprogram) + u8 newstate, int reprogram) { struct hrtimer_cpu_base *cpu_base = base->cpu_base; - unsigned int state = timer->state; + u8 state = timer->state; timer->state = newstate; if (!(state & HRTIMER_STATE_ENQUEUED)) @@ -930,7 +930,7 @@ static inline int remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, bool restart) { if (hrtimer_is_queued(timer)) { - unsigned long state = timer->state; + u8 state = timer->state; int reprogram; /* @@ -954,6 +954,22 @@ remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, bool rest return 0; } +static inline ktime_t hrtimer_update_lowres(struct hrtimer *timer, ktime_t tim, + const enum hrtimer_mode mode) +{ +#ifdef CONFIG_TIME_LOW_RES + /* + * CONFIG_TIME_LOW_RES indicates that the system has no way to return + * granular time values. For relative timers we add hrtimer_resolution + * (i.e. one jiffie) to prevent short timeouts. + */ + timer->is_rel = mode & HRTIMER_MODE_REL; + if (timer->is_rel) + tim = ktime_add_safe(tim, ktime_set(0, hrtimer_resolution)); +#endif + return tim; +} + /** * hrtimer_start_range_ns - (re)start an hrtimer on the current CPU * @timer: the timer to be added @@ -974,19 +990,10 @@ void hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, /* Remove an active timer from the queue: */ remove_hrtimer(timer, base, true); - if (mode & HRTIMER_MODE_REL) { + if (mode & HRTIMER_MODE_REL) tim = ktime_add_safe(tim, base->get_time()); - /* - * CONFIG_TIME_LOW_RES is a temporary way for architectures - * to signal that they simply return xtime in - * do_gettimeoffset(). In this case we want to round up by - * resolution when starting a relative timer, to avoid short - * timeouts. This will go away with the GTOD framework. - */ -#ifdef CONFIG_TIME_LOW_RES - tim = ktime_add_safe(tim, ktime_set(0, hrtimer_resolution)); -#endif - } + + tim = hrtimer_update_lowres(timer, tim, mode); hrtimer_set_expires_range_ns(timer, tim, delta_ns); @@ -1074,19 +1081,23 @@ EXPORT_SYMBOL_GPL(hrtimer_cancel); /** * hrtimer_get_remaining - get remaining time for the timer * @timer: the timer to read + * @adjust: adjust relative timers when CONFIG_TIME_LOW_RES=y */ -ktime_t hrtimer_get_remaining(const struct hrtimer *timer) +ktime_t __hrtimer_get_remaining(const struct hrtimer *timer, bool adjust) { unsigned long flags; ktime_t rem; lock_hrtimer_base(timer, &flags); - rem = hrtimer_expires_remaining(timer); + if (IS_ENABLED(CONFIG_TIME_LOW_RES) && adjust) + rem = hrtimer_expires_remaining_adjusted(timer); + else + rem = hrtimer_expires_remaining(timer); unlock_hrtimer_base(timer, &flags); return rem; } -EXPORT_SYMBOL_GPL(hrtimer_get_remaining); +EXPORT_SYMBOL_GPL(__hrtimer_get_remaining); #ifdef CONFIG_NO_HZ_COMMON /** @@ -1220,6 +1231,14 @@ static void __run_hrtimer(struct hrtimer_cpu_base *cpu_base, fn = timer->function; /* + * Clear the 'is relative' flag for the TIME_LOW_RES case. If the + * timer is restarted with a period then it becomes an absolute + * timer. If its not restarted it does not matter. + */ + if (IS_ENABLED(CONFIG_TIME_LOW_RES)) + timer->is_rel = false; + + /* * Because we run timers from hardirq context, there is no chance * they get migrated to another cpu, therefore its safe to unlock * the timer base. diff --git a/kernel/time/itimer.c b/kernel/time/itimer.c index 8d262b467573..1d5c7204ddc9 100644 --- a/kernel/time/itimer.c +++ b/kernel/time/itimer.c @@ -26,7 +26,7 @@ */ static struct timeval itimer_get_remtime(struct hrtimer *timer) { - ktime_t rem = hrtimer_get_remaining(timer); + ktime_t rem = __hrtimer_get_remaining(timer, true); /* * Racy but safe: if the itimer expires after the above diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c index 36f2ca09aa5e..6df8927c58a5 100644 --- a/kernel/time/ntp.c +++ b/kernel/time/ntp.c @@ -685,8 +685,18 @@ int ntp_validate_timex(struct timex *txc) if (!capable(CAP_SYS_TIME)) return -EPERM; - if (!timeval_inject_offset_valid(&txc->time)) - return -EINVAL; + if (txc->modes & ADJ_NANO) { + struct timespec ts; + + ts.tv_sec = txc->time.tv_sec; + ts.tv_nsec = txc->time.tv_usec; + if (!timespec_inject_offset_valid(&ts)) + return -EINVAL; + + } else { + if (!timeval_inject_offset_valid(&txc->time)) + return -EINVAL; + } } /* diff --git a/kernel/time/posix-timers.c b/kernel/time/posix-timers.c index 31d11ac9fa47..f2826c35e918 100644 --- a/kernel/time/posix-timers.c +++ b/kernel/time/posix-timers.c @@ -760,7 +760,7 @@ common_timer_get(struct k_itimer *timr, struct itimerspec *cur_setting) (timr->it_sigev_notify & ~SIGEV_THREAD_ID) == SIGEV_NONE)) timr->it_overrun += (unsigned int) hrtimer_forward(timer, now, iv); - remaining = ktime_sub(hrtimer_get_expires(timer), now); + remaining = __hrtimer_expires_remaining_adjusted(timer, now); /* Return 0 only, when the timer is expired and not pending */ if (remaining.tv64 <= 0) { /* diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 9d7a053545f5..0b17424349eb 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -36,16 +36,17 @@ */ static DEFINE_PER_CPU(struct tick_sched, tick_cpu_sched); -/* - * The time, when the last jiffy update happened. Protected by jiffies_lock. - */ -static ktime_t last_jiffies_update; - struct tick_sched *tick_get_tick_sched(int cpu) { return &per_cpu(tick_cpu_sched, cpu); } +#if defined(CONFIG_NO_HZ_COMMON) || defined(CONFIG_HIGH_RES_TIMERS) +/* + * The time, when the last jiffy update happened. Protected by jiffies_lock. + */ +static ktime_t last_jiffies_update; + /* * Must be called with interrupts disabled ! */ @@ -151,6 +152,7 @@ static void tick_sched_handle(struct tick_sched *ts, struct pt_regs *regs) update_process_times(user_mode(regs)); profile_tick(CPU_PROFILING); } +#endif #ifdef CONFIG_NO_HZ_FULL cpumask_var_t tick_nohz_full_mask; @@ -993,9 +995,9 @@ static void tick_nohz_switch_to_nohz(void) /* Get the next period */ next = tick_init_jiffy_update(); - hrtimer_forward_now(&ts->sched_timer, tick_period); hrtimer_set_expires(&ts->sched_timer, next); - tick_program_event(next, 1); + hrtimer_forward_now(&ts->sched_timer, tick_period); + tick_program_event(hrtimer_get_expires(&ts->sched_timer), 1); tick_nohz_activate(ts, NOHZ_MODE_LOWRES); } diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c index f75e35b60149..ba7d8b288bb3 100644 --- a/kernel/time/timer_list.c +++ b/kernel/time/timer_list.c @@ -69,7 +69,7 @@ print_timer(struct seq_file *m, struct hrtimer *taddr, struct hrtimer *timer, print_name_offset(m, taddr); SEQ_printf(m, ", "); print_name_offset(m, timer->function); - SEQ_printf(m, ", S:%02lx", timer->state); + SEQ_printf(m, ", S:%02x", timer->state); #ifdef CONFIG_TIMER_STATS SEQ_printf(m, ", "); print_name_offset(m, timer->start_site); diff --git a/tools/testing/selftests/timers/valid-adjtimex.c b/tools/testing/selftests/timers/valid-adjtimex.c index e86d937cc22c..60fe3c569bd9 100644 --- a/tools/testing/selftests/timers/valid-adjtimex.c +++ b/tools/testing/selftests/timers/valid-adjtimex.c @@ -45,7 +45,17 @@ static inline int ksft_exit_fail(void) } #endif -#define NSEC_PER_SEC 1000000000L +#define NSEC_PER_SEC 1000000000LL +#define USEC_PER_SEC 1000000LL + +#define ADJ_SETOFFSET 0x0100 + +#include <sys/syscall.h> +static int clock_adjtime(clockid_t id, struct timex *tx) +{ + return syscall(__NR_clock_adjtime, id, tx); +} + /* clear NTP time_status & time_state */ int clear_time_state(void) @@ -193,10 +203,137 @@ out: } +int set_offset(long long offset, int use_nano) +{ + struct timex tmx = {}; + int ret; + + tmx.modes = ADJ_SETOFFSET; + if (use_nano) { + tmx.modes |= ADJ_NANO; + + tmx.time.tv_sec = offset / NSEC_PER_SEC; + tmx.time.tv_usec = offset % NSEC_PER_SEC; + + if (offset < 0 && tmx.time.tv_usec) { + tmx.time.tv_sec -= 1; + tmx.time.tv_usec += NSEC_PER_SEC; + } + } else { + tmx.time.tv_sec = offset / USEC_PER_SEC; + tmx.time.tv_usec = offset % USEC_PER_SEC; + + if (offset < 0 && tmx.time.tv_usec) { + tmx.time.tv_sec -= 1; + tmx.time.tv_usec += USEC_PER_SEC; + } + } + + ret = clock_adjtime(CLOCK_REALTIME, &tmx); + if (ret < 0) { + printf("(sec: %ld usec: %ld) ", tmx.time.tv_sec, tmx.time.tv_usec); + printf("[FAIL]\n"); + return -1; + } + return 0; +} + +int set_bad_offset(long sec, long usec, int use_nano) +{ + struct timex tmx = {}; + int ret; + + tmx.modes = ADJ_SETOFFSET; + if (use_nano) + tmx.modes |= ADJ_NANO; + + tmx.time.tv_sec = sec; + tmx.time.tv_usec = usec; + ret = clock_adjtime(CLOCK_REALTIME, &tmx); + if (ret >= 0) { + printf("Invalid (sec: %ld usec: %ld) did not fail! ", tmx.time.tv_sec, tmx.time.tv_usec); + printf("[FAIL]\n"); + return -1; + } + return 0; +} + +int validate_set_offset(void) +{ + printf("Testing ADJ_SETOFFSET... "); + + /* Test valid values */ + if (set_offset(NSEC_PER_SEC - 1, 1)) + return -1; + + if (set_offset(-NSEC_PER_SEC + 1, 1)) + return -1; + + if (set_offset(-NSEC_PER_SEC - 1, 1)) + return -1; + + if (set_offset(5 * NSEC_PER_SEC, 1)) + return -1; + + if (set_offset(-5 * NSEC_PER_SEC, 1)) + return -1; + + if (set_offset(5 * NSEC_PER_SEC + NSEC_PER_SEC / 2, 1)) + return -1; + + if (set_offset(-5 * NSEC_PER_SEC - NSEC_PER_SEC / 2, 1)) + return -1; + + if (set_offset(USEC_PER_SEC - 1, 0)) + return -1; + + if (set_offset(-USEC_PER_SEC + 1, 0)) + return -1; + + if (set_offset(-USEC_PER_SEC - 1, 0)) + return -1; + + if (set_offset(5 * USEC_PER_SEC, 0)) + return -1; + + if (set_offset(-5 * USEC_PER_SEC, 0)) + return -1; + + if (set_offset(5 * USEC_PER_SEC + USEC_PER_SEC / 2, 0)) + return -1; + + if (set_offset(-5 * USEC_PER_SEC - USEC_PER_SEC / 2, 0)) + return -1; + + /* Test invalid values */ + if (set_bad_offset(0, -1, 1)) + return -1; + if (set_bad_offset(0, -1, 0)) + return -1; + if (set_bad_offset(0, 2 * NSEC_PER_SEC, 1)) + return -1; + if (set_bad_offset(0, 2 * USEC_PER_SEC, 0)) + return -1; + if (set_bad_offset(0, NSEC_PER_SEC, 1)) + return -1; + if (set_bad_offset(0, USEC_PER_SEC, 0)) + return -1; + if (set_bad_offset(0, -NSEC_PER_SEC, 1)) + return -1; + if (set_bad_offset(0, -USEC_PER_SEC, 0)) + return -1; + + printf("[OK]\n"); + return 0; +} + int main(int argc, char **argv) { if (validate_freq()) return ksft_exit_fail(); + if (validate_set_offset()) + return ksft_exit_fail(); + return ksft_exit_pass(); } |