diff options
51 files changed, 2616 insertions, 390 deletions
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index 0c10f7678178..53eb6562b979 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -10,9 +10,6 @@ title: Amlogic Meson SPI Communication Controller maintainers: - Neil Armstrong <neil.armstrong@linaro.org> -allOf: - - $ref: "spi-controller.yaml#" - description: | The Meson SPICC is a generic SPI controller for general purpose Full-Duplex communications with dedicated 16 words RX/TX PIO FIFOs. @@ -43,31 +40,53 @@ properties: minItems: 1 maxItems: 2 -if: - properties: - compatible: - contains: - enum: - - amlogic,meson-g12a-spicc - -then: - properties: - clocks: - minItems: 2 - - clock-names: - items: - - const: core - - const: pclk - -else: - properties: - clocks: - maxItems: 1 - - clock-names: - items: - - const: core +allOf: + - $ref: "spi-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson-g12a-spicc + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: core + - const: pclk + + else: + properties: + clocks: + maxItems: 1 + + clock-names: + items: + - const: core + + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson-gx-spicc + + then: + properties: + pinctrl-0: true + pinctrl-1: true + pinctrl-2: true + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: idle-high + - const: idle-low required: - compatible diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt index c63ce4cc0a80..fb38e96d395f 100644 --- a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt +++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt @@ -51,7 +51,7 @@ fiu3: spi@c00000000 { clocks = <&clk NPCM7XX_CLK_AHB>; pinctrl-names = "default"; pinctrl-0 = <&spi3_pins>; - spi-nor@0 { + flash@0 { ... }; }; diff --git a/Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml b/Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml new file mode 100644 index 000000000000..4e0d391e1d69 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nuvoton,wpcm450-fiu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton WPCM450 Flash Interface Unit (FIU) + +maintainers: + - Jonathan Neuschäfer <j.neuschaefer@gmx.net> + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + const: nuvoton,wpcm450-fiu + + reg: + items: + - description: FIU registers + - description: Memory-mapped flash contents + + reg-names: + items: + - const: control + - const: memory + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + nuvoton,shm: + $ref: /schemas/types.yaml#/definitions/phandle + description: a phandle to the SHM block (see ../arm/nuvoton,shm.yaml) + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + spi@c8000000 { + compatible = "nuvoton,wpcm450-fiu"; + reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>; + #address-cells = <1>; + #size-cells = <0>; + reg-names = "control", "memory"; + clocks = <&clk 0>; + nuvoton,shm = <&shm>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; + }; + + shm: syscon@c8001000 { + compatible = "nuvoton,wpcm450-shm", "syscon"; + reg = <0xc8001000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/spi/socionext,f-ospi.yaml b/Documentation/devicetree/bindings/spi/socionext,f-ospi.yaml new file mode 100644 index 000000000000..9878d1446552 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/socionext,f-ospi.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/socionext,f-ospi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext F_OSPI controller + +description: | + The Socionext F_OSPI is a controller used to interface with flash + memories using the SPI communication interface. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: socionext,f-ospi + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + num-cs: + minimum: 1 + maximum: 4 + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + ospi0: spi@80000000 { + compatible = "socionext,f-ospi"; + reg = <0x80000000 0x1000>; + clocks = <&clks 0>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "spansion,s25fl128s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/socionext,synquacer-spi.yaml b/Documentation/devicetree/bindings/spi/socionext,synquacer-spi.yaml new file mode 100644 index 000000000000..45cbe744c7ff --- /dev/null +++ b/Documentation/devicetree/bindings/spi/socionext,synquacer-spi.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/socionext,synquacer-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext SynQuacer HS-SPI Controller + +maintainers: + - Masahisa Kojima <masahisa.kojima@linaro.org> + - Jassi Brar <jaswinder.singh@linaro.org> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: socionext,synquacer-spi + + reg: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: core clock + - description: rate clock + + clock-names: + minItems: 1 + items: + - const: iHCLK + - const: iPCLK + + interrupts: + items: + - description: Receive Interrupt + - description: Transmit Interrupt + - description: Fault Interrupt + + socionext,use-rtm: + type: boolean + description: Enable using "retimed clock" for RX + + socionext,set-aces: + type: boolean + description: Enable same active clock edges field to be set + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@ff110000 { + compatible = "socionext,synquacer-spi"; + reg = <0xff110000 0x1000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_hsspi>; + clock-names = "iHCLK"; + socionext,use-rtm; + socionext,set-aces; + }; +... diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml index 8b44284d30c6..94caa2b7e241 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml @@ -56,6 +56,13 @@ properties: this property to re-config the chipselect value in the LPSPI driver. type: boolean + num-cs: + description: + number of chip selects. + minimum: 1 + maximum: 2 + default: 1 + required: - compatible - reg @@ -80,4 +87,5 @@ examples: clock-names = "per", "ipg"; spi-slave; fsl,spi-only-use-cs1-sel; + num-cs = <2>; }; diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index dca677f9e1b9..ead2cccf658f 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -44,6 +44,11 @@ properties: description: Maximum SPI clocking speed of the device in Hz. + spi-cs-setup-ns: + description: + Delay in nanosecods to be introduced by the controller after CS is + asserted. + spi-rx-bus-width: description: Bus width to the SPI bus used for read transfers. diff --git a/Documentation/devicetree/bindings/spi/spi-synquacer.txt b/Documentation/devicetree/bindings/spi/spi-synquacer.txt deleted file mode 100644 index 291dfa692d0a..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-synquacer.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Socionext Synquacer HS-SPI bindings - -Required Properties: -- compatible: should be "socionext,synquacer-spi" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: should contain the "spi_rx", "spi_tx" and "spi_fault" interrupts. -- clocks: core clock iHCLK. Optional rate clock iPCLK (default is iHCLK) -- clock-names: Shall be "iHCLK" and "iPCLK" respectively - -Optional Properties: -- socionext,use-rtm: boolean, if required to use "retimed clock" for RX -- socionext,set-aces: boolean, if same active clock edges field to be set. - -Example: - - spi0: spi@ff110000 { - compatible = "socionext,synquacer-spi"; - reg = <0xff110000 0x1000>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_hsspi>; - clock-names = "iHCLK"; - socionext,use-rtm; - socionext,set-aces; - }; diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml index 6bf0edc57f4a..546c416cdb55 100644 --- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml @@ -14,7 +14,9 @@ allOf: properties: compatible: - const: xlnx,zynqmp-qspi-1.0 + enum: + - xlnx,versal-qspi-1.0 + - xlnx,zynqmp-qspi-1.0 reg: maxItems: 2 diff --git a/Documentation/driver-api/spi.rst b/Documentation/driver-api/spi.rst index f64cb666498a..f28887045049 100644 --- a/Documentation/driver-api/spi.rst +++ b/Documentation/driver-api/spi.rst @@ -25,8 +25,8 @@ hardware, which may be as simple as a set of GPIO pins or as complex as a pair of FIFOs connected to dual DMA engines on the other side of the SPI shift register (maximizing throughput). Such drivers bridge between whatever bus they sit on (often the platform bus) and SPI, and expose -the SPI side of their device as a :c:type:`struct spi_master -<spi_master>`. SPI devices are children of that master, +the SPI side of their device as a :c:type:`struct spi_controller +<spi_controller>`. SPI devices are children of that master, represented as a :c:type:`struct spi_device <spi_device>` and manufactured from :c:type:`struct spi_board_info <spi_board_info>` descriptors which are usually provided by diff --git a/MAINTAINERS b/MAINTAINERS index de46dc69922a..fb2686a25342 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19159,7 +19159,7 @@ M: Masahisa Kojima <masahisa.kojima@linaro.org> M: Jassi Brar <jaswinder.singh@linaro.org> L: linux-spi@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/spi/spi-synquacer.txt +F: Documentation/devicetree/bindings/spi/socionext,synquacer-spi.yaml F: drivers/spi/spi-synquacer.c SOCIONEXT SYNQUACER I2C DRIVER diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c index ff5cabe70a2b..6bc6b6c84241 100644 --- a/drivers/firmware/xilinx/zynqmp.c +++ b/drivers/firmware/xilinx/zynqmp.c @@ -843,6 +843,13 @@ int zynqmp_pm_read_pggs(u32 index, u32 *value) } EXPORT_SYMBOL_GPL(zynqmp_pm_read_pggs); +int zynqmp_pm_set_tapdelay_bypass(u32 index, u32 value) +{ + return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_TAPDELAY_BYPASS, + index, value, NULL); +} +EXPORT_SYMBOL_GPL(zynqmp_pm_set_tapdelay_bypass); + /** * zynqmp_pm_set_boot_health_status() - PM API for setting healthy boot status * @value: Status value to be written diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index d1bb62f7368b..3b1c0878bb85 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -241,7 +241,7 @@ config SPI_CADENCE_QUADSPI config SPI_CADENCE_XSPI tristate "Cadence XSPI controller" - depends on (OF || COMPILE_TEST) && HAS_IOMEM + depends on OF && HAS_IOMEM depends on SPI_MEM help Enable support for the Cadence XSPI Flash controller. @@ -635,6 +635,17 @@ config SPI_MTK_SNFI is implemented as a SPI-MEM controller with pipelined ECC capcability. +config SPI_WPCM_FIU + tristate "Nuvoton WPCM450 Flash Interface Unit" + depends on ARCH_NPCM || COMPILE_TEST + select REGMAP + help + This enables support got the Flash Interface Unit SPI controller + present in the Nuvoton WPCM450 SoC. + + This driver does not support generic SPI. The implementation only + supports the spi-mem interface. + config SPI_NPCM_FIU tristate "Nuvoton NPCM FLASH Interface Unit" depends on ARCH_NPCM || COMPILE_TEST @@ -710,6 +721,15 @@ config SPI_ORION This enables using the SPI master controller on the Orion and MVEBU chips. +config SPI_PCI1XXXX + tristate "PCI1XXXX SPI Bus support" + depends on PCI + help + Say "yes" to Enable the SPI Bus support for the PCI1xxxx card + This is a PCI to SPI Bus driver + This driver can be built as module. If so, the module will be + called as spi-pci1xxxx. + config SPI_PIC32 tristate "Microchip PIC32 series SPI" depends on MACH_PIC32 || COMPILE_TEST @@ -897,6 +917,15 @@ config SPI_SLAVE_MT27XX say Y or M here.If you are not sure, say N. SPI slave drivers for Mediatek MT27XX series ARM SoCs. +config SPI_SN_F_OSPI + tristate "Socionext F_OSPI SPI flash controller" + depends on OF && HAS_IOMEM + depends on SPI_MEM + help + This enables support for the Socionext F_OSPI controller + for connecting an SPI Flash memory over up to 8-bit wide bus. + It supports indirect access mode only. + config SPI_SPRD tristate "Spreadtrum SPI controller" depends on ARCH_SPRD || COMPILE_TEST diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 4b34e855c841..be9ba40ef8d0 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -83,6 +83,7 @@ obj-$(CONFIG_SPI_MTK_NOR) += spi-mtk-nor.o obj-$(CONFIG_SPI_MTK_SNFI) += spi-mtk-snfi.o obj-$(CONFIG_SPI_MXIC) += spi-mxic.o obj-$(CONFIG_SPI_MXS) += spi-mxs.o +obj-$(CONFIG_SPI_WPCM_FIU) += spi-wpcm-fiu.o obj-$(CONFIG_SPI_NPCM_FIU) += spi-npcm-fiu.o obj-$(CONFIG_SPI_NPCM_PSPI) += spi-npcm-pspi.o obj-$(CONFIG_SPI_NXP_FLEXSPI) += spi-nxp-fspi.o @@ -94,6 +95,7 @@ obj-$(CONFIG_SPI_OMAP_100K) += spi-omap-100k.o obj-$(CONFIG_SPI_OMAP24XX) += spi-omap2-mcspi.o obj-$(CONFIG_SPI_TI_QSPI) += spi-ti-qspi.o obj-$(CONFIG_SPI_ORION) += spi-orion.o +obj-$(CONFIG_SPI_PCI1XXXX) += spi-pci1xxxx.o obj-$(CONFIG_SPI_PIC32) += spi-pic32.o obj-$(CONFIG_SPI_PIC32_SQI) += spi-pic32-sqi.o obj-$(CONFIG_SPI_PL022) += spi-pl022.o @@ -120,6 +122,7 @@ obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o obj-$(CONFIG_SPI_SIFIVE) += spi-sifive.o obj-$(CONFIG_SPI_SLAVE_MT27XX) += spi-slave-mt27xx.o +obj-$(CONFIG_SPI_SN_F_OSPI) += spi-sn-f-ospi.o obj-$(CONFIG_SPI_SPRD) += spi-sprd.o obj-$(CONFIG_SPI_SPRD_ADI) += spi-sprd-adi.o obj-$(CONFIG_SPI_STM32) += spi-stm32.o diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c index 976a217e356d..70637e46290a 100644 --- a/drivers/spi/atmel-quadspi.c +++ b/drivers/spi/atmel-quadspi.c @@ -510,6 +510,39 @@ static int atmel_qspi_setup(struct spi_device *spi) return 0; } +static int atmel_qspi_set_cs_timing(struct spi_device *spi) +{ + struct spi_controller *ctrl = spi->master; + struct atmel_qspi *aq = spi_controller_get_devdata(ctrl); + unsigned long clk_rate; + u32 cs_setup; + int delay; + int ret; + + delay = spi_delay_to_ns(&spi->cs_setup, NULL); + if (delay <= 0) + return delay; + + clk_rate = clk_get_rate(aq->pclk); + if (!clk_rate) + return -EINVAL; + + cs_setup = DIV_ROUND_UP((delay * DIV_ROUND_UP(clk_rate, 1000000)), + 1000); + + ret = pm_runtime_resume_and_get(ctrl->dev.parent); + if (ret < 0) + return ret; + + aq->scr |= QSPI_SCR_DLYBS(cs_setup); + atmel_qspi_write(aq->scr, aq, QSPI_SCR); + + pm_runtime_mark_last_busy(ctrl->dev.parent); + pm_runtime_put_autosuspend(ctrl->dev.parent); + + return 0; +} + static void atmel_qspi_init(struct atmel_qspi *aq) { /* Reset the QSPI controller */ @@ -555,6 +588,7 @@ static int atmel_qspi_probe(struct platform_device *pdev) ctrl->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD; ctrl->setup = atmel_qspi_setup; + ctrl->set_cs_timing = atmel_qspi_set_cs_timing; ctrl->bus_num = -1; ctrl->mem_ops = &atmel_qspi_mem_ops; ctrl->num_chipselect = 1; diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c index b90571396a60..873ff2cf72c9 100644 --- a/drivers/spi/spi-aspeed-smc.c +++ b/drivers/spi/spi-aspeed-smc.c @@ -734,13 +734,11 @@ static int aspeed_spi_probe(struct platform_device *pdev) aspi->data = data; aspi->dev = dev; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - aspi->regs = devm_ioremap_resource(dev, res); + aspi->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(aspi->regs)) return PTR_ERR(aspi->regs); - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - aspi->ahb_base = devm_ioremap_resource(dev, res); + aspi->ahb_base = devm_platform_get_and_ioremap_resource(pdev, 1, &res); if (IS_ERR(aspi->ahb_base)) { dev_err(dev, "missing AHB mapping window\n"); return PTR_ERR(aspi->ahb_base); diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c index cad2d55dcd3d..0eee574d3e1f 100644 --- a/drivers/spi/spi-bcm-qspi.c +++ b/drivers/spi/spi-bcm-qspi.c @@ -1682,7 +1682,7 @@ qspi_probe_err: /* probe function to be called by SoC specific platform driver probe */ EXPORT_SYMBOL_GPL(bcm_qspi_probe); -int bcm_qspi_remove(struct platform_device *pdev) +void bcm_qspi_remove(struct platform_device *pdev) { struct bcm_qspi *qspi = platform_get_drvdata(pdev); @@ -1690,9 +1690,8 @@ int bcm_qspi_remove(struct platform_device *pdev) bcm_qspi_hw_uninit(qspi); clk_disable_unprepare(qspi->clk); kfree(qspi->dev_ids); - - return 0; } + /* function to be called by SoC specific platform driver remove() */ EXPORT_SYMBOL_GPL(bcm_qspi_remove); diff --git a/drivers/spi/spi-bcm-qspi.h b/drivers/spi/spi-bcm-qspi.h index 01aec6460108..3d7c359c0239 100644 --- a/drivers/spi/spi-bcm-qspi.h +++ b/drivers/spi/spi-bcm-qspi.h @@ -96,7 +96,7 @@ static inline u32 get_qspi_mask(int type) /* The common driver functions to be called by the SoC platform driver */ int bcm_qspi_probe(struct platform_device *pdev, struct bcm_qspi_soc_intc *soc_intc); -int bcm_qspi_remove(struct platform_device *pdev); +void bcm_qspi_remove(struct platform_device *pdev); /* pm_ops used by the SoC platform driver called on PM suspend/resume */ extern const struct dev_pm_ops bcm_qspi_pm_ops; diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 80fa0ef8909c..3686d78c44a6 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -547,8 +547,7 @@ static int bcm63xx_spi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, master); bs->pdev = pdev; - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - bs->regs = devm_ioremap_resource(&pdev->dev, r); + bs->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &r); if (IS_ERR(bs->regs)) { ret = PTR_ERR(bs->regs); goto out_err; diff --git a/drivers/spi/spi-brcmstb-qspi.c b/drivers/spi/spi-brcmstb-qspi.c index 75e9b76dab1e..de362b35718f 100644 --- a/drivers/spi/spi-brcmstb-qspi.c +++ b/drivers/spi/spi-brcmstb-qspi.c @@ -23,7 +23,9 @@ static int brcmstb_qspi_probe(struct platform_device *pdev) static int brcmstb_qspi_remove(struct platform_device *pdev) { - return bcm_qspi_remove(pdev); + bcm_qspi_remove(pdev); + + return 0; } static struct platform_driver brcmstb_qspi_driver = { diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index 447230547945..676313e1bdad 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -1119,6 +1119,14 @@ static void cqspi_config_baudrate_div(struct cqspi_st *cqspi) /* Recalculate the baudrate divisor based on QSPI specification. */ div = DIV_ROUND_UP(ref_clk_hz, 2 * cqspi->sclk) - 1; + /* Maximum baud divisor */ + if (div > CQSPI_REG_CONFIG_BAUD_MASK) { + div = CQSPI_REG_CONFIG_BAUD_MASK; + dev_warn(&cqspi->pdev->dev, + "Unable to adjust clock <= %d hz. Reduced to %d hz\n", + cqspi->sclk, ref_clk_hz/((div+1)*2)); + } + reg = readl(reg_base + CQSPI_REG_CONFIG); reg &= ~(CQSPI_REG_CONFIG_BAUD_MASK << CQSPI_REG_CONFIG_BAUD_LSB); reg |= (div & CQSPI_REG_CONFIG_BAUD_MASK) << CQSPI_REG_CONFIG_BAUD_LSB; @@ -1580,7 +1588,6 @@ static int cqspi_probe(struct platform_device *pdev) struct spi_master *master; struct resource *res_ahb; struct cqspi_st *cqspi; - struct resource *res; int ret; int irq; @@ -1616,8 +1623,7 @@ static int cqspi_probe(struct platform_device *pdev) } /* Obtain and remap controller address. */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - cqspi->iobase = devm_ioremap_resource(dev, res); + cqspi->iobase = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(cqspi->iobase)) { dev_err(dev, "Cannot remap controller address.\n"); ret = PTR_ERR(cqspi->iobase); @@ -1625,8 +1631,7 @@ static int cqspi_probe(struct platform_device *pdev) } /* Obtain and remap AHB address. */ - res_ahb = platform_get_resource(pdev, IORESOURCE_MEM, 1); - cqspi->ahb_base = devm_ioremap_resource(dev, res_ahb); + cqspi->ahb_base = devm_platform_get_and_ioremap_resource(pdev, 1, &res_ahb); if (IS_ERR(cqspi->ahb_base)) { dev_err(dev, "Cannot remap AHB address.\n"); ret = PTR_ERR(cqspi->ahb_base); diff --git a/drivers/spi/spi-cadence-xspi.c b/drivers/spi/spi-cadence-xspi.c index 9e187f9c6c95..520b4cc69cdc 100644 --- a/drivers/spi/spi-cadence-xspi.c +++ b/drivers/spi/spi-cadence-xspi.c @@ -607,7 +607,6 @@ static int cdns_xspi_probe(struct platform_device *pdev) return 0; } -#ifdef CONFIG_OF static const struct of_device_id cdns_xspi_of_match[] = { { .compatible = "cdns,xspi-nor", @@ -615,9 +614,6 @@ static const struct of_device_id cdns_xspi_of_match[] = { { /* end of table */} }; MODULE_DEVICE_TABLE(of, cdns_xspi_of_match); -#else -#define cdns_xspi_of_match NULL -#endif /* CONFIG_OF */ static struct platform_driver cdns_xspi_platform_driver = { .probe = cdns_xspi_probe, diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c index ee905880769e..17a44d4f5021 100644 --- a/drivers/spi/spi-fsl-cpm.c +++ b/drivers/spi/spi-fsl-cpm.c @@ -333,7 +333,7 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) goto err_bds; } - mspi->dma_dummy_tx = dma_map_single(dev, empty_zero_page, PAGE_SIZE, + mspi->dma_dummy_tx = dma_map_single(dev, ZERO_PAGE(0), PAGE_SIZE, DMA_TO_DEVICE); if (dma_mapping_error(dev, mspi->dma_dummy_tx)) { dev_err(dev, "unable to map dummy tx buffer\n"); diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index a33e547b7d39..e419642eb10e 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -900,12 +900,31 @@ static irqreturn_t dspi_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +static void dspi_assert_cs(struct spi_device *spi, bool *cs) +{ + if (!spi->cs_gpiod || *cs) + return; + + gpiod_set_value_cansleep(spi->cs_gpiod, true); + *cs = true; +} + +static void dspi_deassert_cs(struct spi_device *spi, bool *cs) +{ + if (!spi->cs_gpiod || !*cs) + return; + + gpiod_set_value_cansleep(spi->cs_gpiod, false); + *cs = false; +} + static int dspi_transfer_one_message(struct spi_controller *ctlr, struct spi_message *message) { struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr); struct spi_device *spi = message->spi; struct spi_transfer *transfer; + bool cs = false; int status = 0; message->actual_length = 0; @@ -914,9 +933,14 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr, dspi->cur_transfer = transfer; dspi->cur_msg = message; dspi->cur_chip = spi_get_ctldata(spi); + + dspi_assert_cs(spi, &cs); + /* Prepare command word for CMD FIFO */ - dspi->tx_cmd = SPI_PUSHR_CMD_CTAS(0) | - SPI_PUSHR_CMD_PCS(spi->chip_select); + dspi->tx_cmd = SPI_PUSHR_CMD_CTAS(0); + if (!spi->cs_gpiod) + dspi->tx_cmd |= SPI_PUSHR_CMD_PCS(spi->chip_select); + if (list_is_last(&dspi->cur_transfer->transfer_list, &dspi->cur_msg->transfers)) { /* Leave PCS activated after last transfer when @@ -964,6 +988,9 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr, break; spi_transfer_delay_exec(transfer); + + if (!(dspi->tx_cmd & SPI_PUSHR_CMD_CONT)) + dspi_deassert_cs(spi, &cs); } message->status = status; @@ -981,6 +1008,7 @@ static int dspi_setup(struct spi_device *spi) unsigned char pasc = 0, asc = 0; struct chip_data *chip; unsigned long clkrate; + bool cs = true; /* Only alloc on first setup */ chip = spi_get_ctldata(spi); @@ -1030,6 +1058,9 @@ static int dspi_setup(struct spi_device *spi) chip->ctar_val |= SPI_CTAR_LSBFE; } + gpiod_direction_output(spi->cs_gpiod, false); + dspi_deassert_cs(spi, &cs); + spi_set_ctldata(spi, chip); return 0; @@ -1248,6 +1279,7 @@ static int dspi_probe(struct platform_device *pdev) ctlr->cleanup = dspi_cleanup; ctlr->slave_abort = dspi_slave_abort; ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; + ctlr->use_gpio_descriptors = true; pdata = dev_get_platdata(&pdev->dev); if (pdata) { diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c index e8c1c8a4c6c8..34488de55587 100644 --- a/drivers/spi/spi-fsl-lpspi.c +++ b/drivers/spi/spi-fsl-lpspi.c @@ -98,6 +98,7 @@ struct fsl_lpspi_data { struct clk *clk_ipg; struct clk *clk_per; bool is_slave; + u32 num_cs; bool is_only_cs1; bool is_first_byte; @@ -840,6 +841,9 @@ static int fsl_lpspi_probe(struct platform_device *pdev) fsl_lpspi->is_slave = is_slave; fsl_lpspi->is_only_cs1 = of_property_read_bool((&pdev->dev)->of_node, "fsl,spi-only-use-cs1-sel"); + if (of_property_read_u32((&pdev->dev)->of_node, "num-cs", + &fsl_lpspi->num_cs)) + fsl_lpspi->num_cs = 1; controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 32); controller->transfer_one = fsl_lpspi_transfer_one; @@ -849,6 +853,7 @@ static int fsl_lpspi_probe(struct platform_device *pdev) controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX; controller->dev.of_node = pdev->dev.of_node; controller->bus_num = pdev->id; + controller->num_chipselect = fsl_lpspi->num_cs; controller->slave_abort = fsl_lpspi_slave_abort; if (!fsl_lpspi->is_slave) controller->use_gpio_descriptors = true; diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index 4b12c4964a66..9c8c7948044e 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -268,9 +268,19 @@ static int spi_gpio_set_direction(struct spi_device *spi, bool output) if (output) return gpiod_direction_output(spi_gpio->mosi, 1); - ret = gpiod_direction_input(spi_gpio->mosi); - if (ret) - return ret; + /* + * Only change MOSI to an input if using 3WIRE mode. + * Otherwise, MOSI could be left floating if there is + * no pull resistor connected to the I/O pin, or could + * be left logic high if there is a pull-up. Transmitting + * logic high when only clocking MISO data in can put some + * SPI devices in to a bad state. + */ + if (spi->mode & SPI_3WIRE) { + ret = gpiod_direction_input(spi_gpio->mosi); + if (ret) + return ret; + } /* * Send a turnaround high impedance cycle when switching * from output to input. Theoretically there should be diff --git a/drivers/spi/spi-hisi-sfc-v3xx.c b/drivers/spi/spi-hisi-sfc-v3xx.c index d3a23b1c2a4c..f07d1045a30a 100644 --- a/drivers/spi/spi-hisi-sfc-v3xx.c +++ b/drivers/spi/spi-hisi-sfc-v3xx.c @@ -165,7 +165,7 @@ static int hisi_sfc_v3xx_adjust_op_size(struct spi_mem *mem, } /* - * The controller only supports Standard SPI mode, Duall mode and + * The controller only supports Standard SPI mode, Dual mode and * Quad mode. Double sanitize the ops here to avoid OOB access. */ static bool hisi_sfc_v3xx_supports_op(struct spi_mem *mem, diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c index bfd12247f173..257046f843ff 100644 --- a/drivers/spi/spi-img-spfi.c +++ b/drivers/spi/spi-img-spfi.c @@ -540,8 +540,7 @@ static int img_spfi_probe(struct platform_device *pdev) spfi->master = master; spin_lock_init(&spfi->lock); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - spfi->regs = devm_ioremap_resource(spfi->dev, res); + spfi->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res); if (IS_ERR(spfi->regs)) { ret = PTR_ERR(spfi->regs); goto put_spi; diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index d209930069cf..e4ccd0c329d0 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -77,7 +77,6 @@ struct spi_imx_devtype_data { void (*reset)(struct spi_imx_data *spi_imx); void (*setup_wml)(struct spi_imx_data *spi_imx); void (*disable)(struct spi_imx_data *spi_imx); - void (*disable_dma)(struct spi_imx_data *spi_imx); bool has_dmamode; bool has_slavemode; unsigned int fifo_size; @@ -496,11 +495,6 @@ static void mx51_ecspi_trigger(struct spi_imx_data *spi_imx) writel(reg, spi_imx->base + MX51_ECSPI_CTRL); } -static void mx51_disable_dma(struct spi_imx_data *spi_imx) -{ - writel(0, spi_imx->base + MX51_ECSPI_DMA); -} - static void mx51_ecspi_disable(struct spi_imx_data *spi_imx) { u32 ctrl; @@ -1042,7 +1036,6 @@ static struct spi_imx_devtype_data imx51_ecspi_devtype_data = { .rx_available = mx51_ecspi_rx_available, .reset = mx51_ecspi_reset, .setup_wml = mx51_setup_wml, - .disable_dma = mx51_disable_dma, .fifo_size = 64, .has_dmamode = true, .dynamic_burst = true, @@ -1057,7 +1050,6 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = { .prepare_transfer = mx51_ecspi_prepare_transfer, .trigger = mx51_ecspi_trigger, .rx_available = mx51_ecspi_rx_available, - .disable_dma = mx51_disable_dma, .reset = mx51_ecspi_reset, .fifo_size = 64, .has_dmamode = true, diff --git a/drivers/spi/spi-intel.c b/drivers/spi/spi-intel.c index 3ac73691fbb5..f619212b0d5c 100644 --- a/drivers/spi/spi-intel.c +++ b/drivers/spi/spi-intel.c @@ -33,6 +33,7 @@ #define HSFSTS_CTL_FCYCLE_WRITE (0x02 << HSFSTS_CTL_FCYCLE_SHIFT) #define HSFSTS_CTL_FCYCLE_ERASE (0x03 << HSFSTS_CTL_FCYCLE_SHIFT) #define HSFSTS_CTL_FCYCLE_ERASE_64K (0x04 << HSFSTS_CTL_FCYCLE_SHIFT) +#define HSFSTS_CTL_FCYCLE_RDSFDP (0x05 << HSFSTS_CTL_FCYCLE_SHIFT) #define HSFSTS_CTL_FCYCLE_RDID (0x06 << HSFSTS_CTL_FCYCLE_SHIFT) #define HSFSTS_CTL_FCYCLE_WRSR (0x07 << HSFSTS_CTL_FCYCLE_SHIFT) #define HSFSTS_CTL_FCYCLE_RDSR (0x08 << HSFSTS_CTL_FCYCLE_SHIFT) @@ -352,34 +353,21 @@ static int intel_spi_opcode_index(struct intel_spi *ispi, u8 opcode, int optype) return 0; } -static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, size_t len) +static int intel_spi_hw_cycle(struct intel_spi *ispi, + const struct intel_spi_mem_op *iop, size_t len) { u32 val, status; int ret; - val = readl(ispi->base + HSFSTS_CTL); - val &= ~(HSFSTS_CTL_FCYCLE_MASK | HSFSTS_CTL_FDBC_MASK); - - switch (opcode) { - case SPINOR_OP_RDID: - val |= HSFSTS_CTL_FCYCLE_RDID; - break; - case SPINOR_OP_WRSR: - val |= HSFSTS_CTL_FCYCLE_WRSR; - break; - case SPINOR_OP_RDSR: - val |= HSFSTS_CTL_FCYCLE_RDSR; - break; - default: - return -EINVAL; - } - - if (len > INTEL_SPI_FIFO_SZ) + if (!iop->replacement_op) return -EINVAL; + val = readl(ispi->base + HSFSTS_CTL); + val &= ~(HSFSTS_CTL_FCYCLE_MASK | HSFSTS_CTL_FDBC_MASK); val |= (len - 1) << HSFSTS_CTL_FDBC_SHIFT; val |= HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE; val |= HSFSTS_CTL_FGO; + val |= iop->replacement_op; writel(val, ispi->base + HSFSTS_CTL); ret = intel_spi_wait_hw_busy(ispi); @@ -406,9 +394,6 @@ static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, size_t len, if (ret < 0) return ret; - if (len > INTEL_SPI_FIFO_SZ) - return -EINVAL; - /* * Always clear it after each SW sequencer operation regardless * of whether it is successful or not. @@ -473,17 +458,18 @@ static int intel_spi_read_reg(struct intel_spi *ispi, const struct spi_mem *mem, const struct intel_spi_mem_op *iop, const struct spi_mem_op *op) { + u32 addr = intel_spi_chip_addr(ispi, mem) + op->addr.val; size_t nbytes = op->data.nbytes; u8 opcode = op->cmd.opcode; int ret; - writel(intel_spi_chip_addr(ispi, mem), ispi->base + FADDR); + writel(addr, ispi->base + FADDR); if (ispi->swseq_reg) ret = intel_spi_sw_cycle(ispi, opcode, nbytes, OPTYPE_READ_NO_ADDR); else - ret = intel_spi_hw_cycle(ispi, opcode, nbytes); + ret = intel_spi_hw_cycle(ispi, iop, nbytes); if (ret) return ret; @@ -495,6 +481,7 @@ static int intel_spi_write_reg(struct intel_spi *ispi, const struct spi_mem *mem const struct intel_spi_mem_op *iop, const struct spi_mem_op *op) { + u32 addr = intel_spi_chip_addr(ispi, mem) + op->addr.val; size_t nbytes = op->data.nbytes; u8 opcode = op->cmd.opcode; int ret; @@ -538,7 +525,7 @@ static int intel_spi_write_reg(struct intel_spi *ispi, const struct spi_mem *mem if (opcode == SPINOR_OP_WRDI) return 0; - writel(intel_spi_chip_addr(ispi, mem), ispi->base + FADDR); + writel(addr, ispi->base + FADDR); /* Write the value beforehand */ ret = intel_spi_write_block(ispi, op->data.buf.out, nbytes); @@ -548,7 +535,7 @@ static int intel_spi_write_reg(struct intel_spi *ispi, const struct spi_mem *mem if (ispi->swseq_reg) return intel_spi_sw_cycle(ispi, opcode, nbytes, OPTYPE_WRITE_NO_ADDR); - return intel_spi_hw_cycle(ispi, opcode, nbytes); + return intel_spi_hw_cycle(ispi, iop, nbytes); } static int intel_spi_read(struct intel_spi *ispi, const struct spi_mem *mem, @@ -713,6 +700,12 @@ static int intel_spi_erase(struct intel_spi *ispi, const struct spi_mem *mem, return 0; } +static int intel_spi_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) +{ + op->data.nbytes = clamp_val(op->data.nbytes, 0, INTEL_SPI_FIFO_SZ); + return 0; +} + static bool intel_spi_cmp_mem_op(const struct intel_spi_mem_op *iop, const struct spi_mem_op *op) { @@ -853,6 +846,7 @@ static ssize_t intel_spi_dirmap_write(struct spi_mem_dirmap_desc *desc, u64 offs } static const struct spi_controller_mem_ops intel_spi_mem_ops = { + .adjust_op_size = intel_spi_adjust_op_size, .supports_op = intel_spi_supports_mem_op, .exec_op = intel_spi_exec_mem_op, .get_name = intel_spi_get_name, @@ -912,18 +906,26 @@ static const struct spi_controller_mem_ops intel_spi_mem_ops = { */ #define INTEL_SPI_GENERIC_OPS \ /* Status register operations */ \ - INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1), \ - SPI_MEM_OP_NO_ADDR, \ - INTEL_SPI_OP_DATA_IN(1), \ - intel_spi_read_reg), \ - INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 1), \ - SPI_MEM_OP_NO_ADDR, \ - INTEL_SPI_OP_DATA_IN(1), \ - intel_spi_read_reg), \ - INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1), \ - SPI_MEM_OP_NO_ADDR, \ - INTEL_SPI_OP_DATA_OUT(1), \ - intel_spi_write_reg), \ + INTEL_SPI_MEM_OP_REPL(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1), \ + SPI_MEM_OP_NO_ADDR, \ + INTEL_SPI_OP_DATA_IN(1), \ + intel_spi_read_reg, \ + HSFSTS_CTL_FCYCLE_RDID), \ + INTEL_SPI_MEM_OP_REPL(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 1), \ + SPI_MEM_OP_NO_ADDR, \ + INTEL_SPI_OP_DATA_IN(1), \ + intel_spi_read_reg, \ + HSFSTS_CTL_FCYCLE_RDSR), \ + INTEL_SPI_MEM_OP_REPL(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1), \ + SPI_MEM_OP_NO_ADDR, \ + INTEL_SPI_OP_DATA_OUT(1), \ + intel_spi_write_reg, \ + HSFSTS_CTL_FCYCLE_WRSR), \ + INTEL_SPI_MEM_OP_REPL(SPI_MEM_OP_CMD(SPINOR_OP_RDSFDP, 1), \ + INTEL_SPI_OP_ADDR(3), \ + INTEL_SPI_OP_DATA_IN(1), \ + intel_spi_read_reg, \ + HSFSTS_CTL_FCYCLE_RDSFDP), \ /* Normal read */ \ INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ, 1), \ INTEL_SPI_OP_ADDR(3), \ diff --git a/drivers/spi/spi-iproc-qspi.c b/drivers/spi/spi-iproc-qspi.c index de297dacfd57..91cf8eb7213c 100644 --- a/drivers/spi/spi-iproc-qspi.c +++ b/drivers/spi/spi-iproc-qspi.c @@ -129,7 +129,9 @@ static int bcm_iproc_probe(struct platform_device *pdev) static int bcm_iproc_remove(struct platform_device *pdev) { - return bcm_qspi_remove(pdev); + bcm_qspi_remove(pdev); + + return 0; } static const struct of_device_id bcm_iproc_of_match[] = { diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c index 1b4195c54ee2..d47f2623a60f 100644 --- a/drivers/spi/spi-meson-spicc.c +++ b/drivers/spi/spi-meson-spicc.c @@ -21,6 +21,7 @@ #include <linux/types.h> #include <linux/interrupt.h> #include <linux/reset.h> +#include <linux/pinctrl/consumer.h> /* * The Meson SPICC controller could support DMA based transfers, but is not @@ -168,6 +169,9 @@ struct meson_spicc_device { unsigned long tx_remain; unsigned long rx_remain; unsigned long xfer_remain; + struct pinctrl *pinctrl; + struct pinctrl_state *pins_idle_high; + struct pinctrl_state *pins_idle_low; }; #define pow2_clk_to_spicc(_div) container_of(_div, struct meson_spicc_device, pow2_div) @@ -176,8 +180,22 @@ static void meson_spicc_oen_enable(struct meson_spicc_device *spicc) { u32 conf; - if (!spicc->data->has_oen) + if (!spicc->data->has_oen) { + /* Try to get pinctrl states for idle high/low */ + spicc->pins_idle_high = pinctrl_lookup_state(spicc->pinctrl, + "idle-high"); + if (IS_ERR(spicc->pins_idle_high)) { + dev_warn(&spicc->pdev->dev, "can't get idle-high pinctrl\n"); + spicc->pins_idle_high = NULL; + } + spicc->pins_idle_low = pinctrl_lookup_state(spicc->pinctrl, + "idle-low"); + if (IS_ERR(spicc->pins_idle_low)) { + dev_warn(&spicc->pdev->dev, "can't get idle-low pinctrl\n"); + spicc->pins_idle_low = NULL; + } return; + } conf = readl_relaxed(spicc->base + SPICC_ENH_CTL0) | SPICC_ENH_MOSI_OEN | SPICC_ENH_CLK_OEN | SPICC_ENH_CS_OEN; @@ -459,6 +477,16 @@ static int meson_spicc_prepare_message(struct spi_master *master, else conf &= ~SPICC_POL; + if (!spicc->data->has_oen) { + if (spi->mode & SPI_CPOL) { + if (spicc->pins_idle_high) + pinctrl_select_state(spicc->pinctrl, spicc->pins_idle_high); + } else { + if (spicc->pins_idle_low) + pinctrl_select_state(spicc->pinctrl, spicc->pins_idle_low); + } + } + if (spi->mode & SPI_CPHA) conf |= SPICC_PHA; else @@ -505,6 +533,9 @@ static int meson_spicc_unprepare_transfer(struct spi_master *master) /* Set default configuration, keeping datarate field */ writel_relaxed(conf, spicc->base + SPICC_CONREG); + if (!spicc->data->has_oen) + pinctrl_select_default_state(&spicc->pdev->dev); + return 0; } @@ -818,6 +849,12 @@ static int meson_spicc_probe(struct platform_device *pdev) goto out_core_clk; } + spicc->pinctrl = devm_pinctrl_get(&pdev->dev); + if (IS_ERR(spicc->pinctrl)) { + ret = PTR_ERR(spicc->pinctrl); + goto out_clk; + } + device_reset_optional(&pdev->dev); master->num_chipselect = 4; diff --git a/drivers/spi/spi-microchip-core.c b/drivers/spi/spi-microchip-core.c index d352844c798c..aeaa1da88f39 100644 --- a/drivers/spi/spi-microchip-core.c +++ b/drivers/spi/spi-microchip-core.c @@ -119,15 +119,6 @@ static inline void mchp_corespi_write(struct mchp_corespi *spi, unsigned int reg writel(val, spi->regs + reg); } -static inline void mchp_corespi_enable(struct mchp_corespi *spi) -{ - u32 control = mchp_corespi_read(spi, REG_CONTROL); - - control |= CONTROL_ENABLE; - - mchp_corespi_write(spi, REG_CONTROL, control); -} - static inline void mchp_corespi_disable(struct mchp_corespi *spi) { u32 control = mchp_corespi_read(spi, REG_CONTROL); diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index d6aff909fc36..6de8360e5c2a 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -1192,11 +1192,6 @@ static int mtk_spi_probe(struct platform_device *pdev) else dma_set_max_seg_size(dev, SZ_256K); - ret = devm_request_irq(dev, irq, mtk_spi_interrupt, - IRQF_TRIGGER_NONE, dev_name(dev), master); - if (ret) - return dev_err_probe(dev, ret, "failed to register irq\n"); - mdata->parent_clk = devm_clk_get(dev, "parent-clk"); if (IS_ERR(mdata->parent_clk)) return dev_err_probe(dev, PTR_ERR(mdata->parent_clk), @@ -1266,6 +1261,13 @@ static int mtk_spi_probe(struct platform_device *pdev) return dev_err_probe(dev, ret, "failed to register master\n"); } + ret = devm_request_irq(dev, irq, mtk_spi_interrupt, + IRQF_TRIGGER_NONE, dev_name(dev), master); + if (ret) { + pm_runtime_disable(dev); + return dev_err_probe(dev, ret, "failed to register irq\n"); + } + return 0; } diff --git a/drivers/spi/spi-mtk-nor.c b/drivers/spi/spi-mtk-nor.c index d167699a1a96..aad92a58c4b8 100644 --- a/drivers/spi/spi-mtk-nor.c +++ b/drivers/spi/spi-mtk-nor.c @@ -80,6 +80,9 @@ #define MTK_NOR_REG_DMA_FADR 0x71c #define MTK_NOR_REG_DMA_DADR 0x720 #define MTK_NOR_REG_DMA_END_DADR 0x724 +#define MTK_NOR_REG_CG_DIS 0x728 +#define MTK_NOR_SFC_SW_RST BIT(2) + #define MTK_NOR_REG_DMA_DADR_HB 0x738 #define MTK_NOR_REG_DMA_END_DADR_HB 0x73c @@ -147,6 +150,15 @@ static inline int mtk_nor_cmd_exec(struct mtk_nor *sp, u32 cmd, ulong clk) return ret; } +static void mtk_nor_reset(struct mtk_nor *sp) +{ + mtk_nor_rmw(sp, MTK_NOR_REG_CG_DIS, 0, MTK_NOR_SFC_SW_RST); + mb(); /* flush previous writes */ + mtk_nor_rmw(sp, MTK_NOR_REG_CG_DIS, MTK_NOR_SFC_SW_RST, 0); + mb(); /* flush previous writes */ + writel(MTK_NOR_ENABLE_SF_CMD, sp->base + MTK_NOR_REG_WP); +} + static void mtk_nor_set_addr(struct mtk_nor *sp, const struct spi_mem_op *op) { u32 addr = op->addr.val; @@ -354,7 +366,7 @@ static int mtk_nor_dma_exec(struct mtk_nor *sp, u32 from, unsigned int length, dma_addr_t dma_addr) { int ret = 0; - ulong delay; + u32 delay, timeout; u32 reg; writel(from, sp->base + MTK_NOR_REG_DMA_FADR); @@ -376,15 +388,16 @@ static int mtk_nor_dma_exec(struct mtk_nor *sp, u32 from, unsigned int length, mtk_nor_rmw(sp, MTK_NOR_REG_DMA_CTL, MTK_NOR_DMA_START, 0); delay = CLK_TO_US(sp, (length + 5) * BITS_PER_BYTE); + timeout = (delay + 1) * 100; if (sp->has_irq) { if (!wait_for_completion_timeout(&sp->op_done, - (delay + 1) * 100)) + usecs_to_jiffies(max(timeout, 10000U)))) ret = -ETIMEDOUT; } else { ret = readl_poll_timeout(sp->base + MTK_NOR_REG_DMA_CTL, reg, !(reg & MTK_NOR_DMA_START), delay / 3, - (delay + 1) * 100); + timeout); } if (ret < 0) @@ -443,36 +456,28 @@ static int mtk_nor_read_pio(struct mtk_nor *sp, const struct spi_mem_op *op) return ret; } -static int mtk_nor_write_buffer_enable(struct mtk_nor *sp) +static int mtk_nor_setup_write_buffer(struct mtk_nor *sp, bool on) { int ret; u32 val; - if (sp->wbuf_en) + if (!(sp->wbuf_en ^ on)) return 0; val = readl(sp->base + MTK_NOR_REG_CFG2); - writel(val | MTK_NOR_WR_BUF_EN, sp->base + MTK_NOR_REG_CFG2); - ret = readl_poll_timeout(sp->base + MTK_NOR_REG_CFG2, val, - val & MTK_NOR_WR_BUF_EN, 0, 10000); - if (!ret) - sp->wbuf_en = true; - return ret; -} - -static int mtk_nor_write_buffer_disable(struct mtk_nor *sp) -{ - int ret; - u32 val; + if (on) { + writel(val | MTK_NOR_WR_BUF_EN, sp->base + MTK_NOR_REG_CFG2); + ret = readl_poll_timeout(sp->base + MTK_NOR_REG_CFG2, val, + val & MTK_NOR_WR_BUF_EN, 0, 10000); + } else { + writel(val & ~MTK_NOR_WR_BUF_EN, sp->base + MTK_NOR_REG_CFG2); + ret = readl_poll_timeout(sp->base + MTK_NOR_REG_CFG2, val, + !(val & MTK_NOR_WR_BUF_EN), 0, 10000); + } - if (!sp->wbuf_en) - return 0; - val = readl(sp->base + MTK_NOR_REG_CFG2); - writel(val & ~MTK_NOR_WR_BUF_EN, sp->base + MTK_NOR_REG_CFG2); - ret = readl_poll_timeout(sp->base + MTK_NOR_REG_CFG2, val, - !(val & MTK_NOR_WR_BUF_EN), 0, 10000); if (!ret) - sp->wbuf_en = false; + sp->wbuf_en = on; + return ret; } @@ -482,7 +487,7 @@ static int mtk_nor_pp_buffered(struct mtk_nor *sp, const struct spi_mem_op *op) u32 val; int ret, i; - ret = mtk_nor_write_buffer_enable(sp); + ret = mtk_nor_setup_write_buffer(sp, true); if (ret < 0) return ret; @@ -501,7 +506,7 @@ static int mtk_nor_pp_unbuffered(struct mtk_nor *sp, const u8 *buf = op->data.buf.out; int ret; - ret = mtk_nor_write_buffer_disable(sp); + ret = mtk_nor_setup_write_buffer(sp, false); if (ret < 0) return ret; writeb(buf[0], sp->base + MTK_NOR_REG_WDATA); @@ -608,7 +613,7 @@ static int mtk_nor_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) } if ((op->data.dir == SPI_MEM_DATA_IN) && mtk_nor_match_read(op)) { - ret = mtk_nor_write_buffer_disable(sp); + ret = mtk_nor_setup_write_buffer(sp, false); if (ret < 0) return ret; mtk_nor_setup_bus(sp, op); @@ -616,7 +621,15 @@ static int mtk_nor_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) mtk_nor_set_addr(sp, op); return mtk_nor_read_pio(sp, op); } else { - return mtk_nor_read_dma(sp, op); + ret = mtk_nor_read_dma(sp, op); + if (unlikely(ret)) { + /* Handle rare bus glitch */ + mtk_nor_reset(sp); + mtk_nor_setup_bus(sp, op); + return mtk_nor_read_dma(sp, op); + } + + return ret; } } diff --git a/drivers/spi/spi-mtk-snfi.c b/drivers/spi/spi-mtk-snfi.c index d66bf9762557..fa8412ba20e2 100644 --- a/drivers/spi/spi-mtk-snfi.c +++ b/drivers/spi/spi-mtk-snfi.c @@ -126,7 +126,8 @@ #define STR_DATA BIT(0) #define NFI_STA 0x060 -#define NFI_NAND_FSM GENMASK(28, 24) +#define NFI_NAND_FSM_7622 GENMASK(28, 24) +#define NFI_NAND_FSM_7986 GENMASK(29, 23) #define NFI_FSM GENMASK(19, 16) #define READ_EMPTY BIT(12) @@ -158,6 +159,7 @@ #define MAS_WR GENMASK(5, 3) #define MAS_RDDLY GENMASK(2, 0) #define NFI_MASTERSTA_MASK_7622 (MAS_ADDR | MAS_RD | MAS_WR | MAS_RDDLY) +#define NFI_MASTERSTA_MASK_7986 3 // SNFI registers #define SNF_MAC_CTL 0x500 @@ -220,6 +222,11 @@ static const u8 mt7622_spare_sizes[] = { 16, 26, 27, 28 }; +static const u8 mt7986_spare_sizes[] = { + 16, 26, 27, 28, 32, 36, 40, 44, 48, 49, 50, 51, 52, 62, 61, 63, 64, 67, + 74 +}; + struct mtk_snand_caps { u16 sector_size; u16 max_sectors; @@ -230,6 +237,7 @@ struct mtk_snand_caps { bool bbm_swap; bool empty_page_check; u32 mastersta_mask; + u32 nandfsm_mask; const u8 *spare_sizes; u32 num_spare_size; @@ -244,6 +252,7 @@ static const struct mtk_snand_caps mt7622_snand_caps = { .bbm_swap = false, .empty_page_check = false, .mastersta_mask = NFI_MASTERSTA_MASK_7622, + .nandfsm_mask = NFI_NAND_FSM_7622, .spare_sizes = mt7622_spare_sizes, .num_spare_size = ARRAY_SIZE(mt7622_spare_sizes) }; @@ -257,10 +266,25 @@ static const struct mtk_snand_caps mt7629_snand_caps = { .bbm_swap = true, .empty_page_check = false, .mastersta_mask = NFI_MASTERSTA_MASK_7622, + .nandfsm_mask = NFI_NAND_FSM_7622, .spare_sizes = mt7622_spare_sizes, .num_spare_size = ARRAY_SIZE(mt7622_spare_sizes) }; +static const struct mtk_snand_caps mt7986_snand_caps = { + .sector_size = 1024, + .max_sectors = 8, + .fdm_size = 8, + .fdm_ecc_size = 1, + .fifo_size = 64, + .bbm_swap = true, + .empty_page_check = true, + .mastersta_mask = NFI_MASTERSTA_MASK_7986, + .nandfsm_mask = NFI_NAND_FSM_7986, + .spare_sizes = mt7986_spare_sizes, + .num_spare_size = ARRAY_SIZE(mt7986_spare_sizes) +}; + struct mtk_snand_conf { size_t page_size; size_t oob_size; @@ -360,7 +384,7 @@ static int mtk_nfi_reset(struct mtk_snand *snf) } ret = readl_poll_timeout(snf->nfi_base + NFI_STA, val, - !(val & (NFI_FSM | NFI_NAND_FSM)), 0, + !(val & (NFI_FSM | snf->caps->nandfsm_mask)), 0, SNFI_POLL_INTERVAL); if (ret) { dev_err(snf->dev, "Failed to reset NFI\n"); @@ -1295,6 +1319,7 @@ static irqreturn_t mtk_snand_irq(int irq, void *id) static const struct of_device_id mtk_snand_ids[] = { { .compatible = "mediatek,mt7622-snand", .data = &mt7622_snand_caps }, { .compatible = "mediatek,mt7629-snand", .data = &mt7629_snand_caps }, + { .compatible = "mediatek,mt7986-snand", .data = &mt7986_snand_caps }, {}, }; diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c index 65be8e085ab8..a3dba17390eb 100644 --- a/drivers/spi/spi-mxic.c +++ b/drivers/spi/spi-mxic.c @@ -772,8 +772,7 @@ static int mxic_spi_probe(struct platform_device *pdev) if (IS_ERR(mxic->send_dly_clk)) return PTR_ERR(mxic->send_dly_clk); - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); - mxic->regs = devm_ioremap_resource(&pdev->dev, res); + mxic->regs = devm_platform_ioremap_resource_byname(pdev, "regs"); if (IS_ERR(mxic->regs)) return PTR_ERR(mxic->regs); diff --git a/drivers/spi/spi-npcm-fiu.c b/drivers/spi/spi-npcm-fiu.c index 49f6424e35af..559d3a5b4062 100644 --- a/drivers/spi/spi-npcm-fiu.c +++ b/drivers/spi/spi-npcm-fiu.c @@ -699,7 +699,6 @@ static int npcm_fiu_probe(struct platform_device *pdev) struct spi_controller *ctrl; struct npcm_fiu_spi *fiu; void __iomem *regbase; - struct resource *res; int id, ret; ctrl = devm_spi_alloc_master(dev, sizeof(*fiu)); @@ -725,8 +724,7 @@ static int npcm_fiu_probe(struct platform_device *pdev) platform_set_drvdata(pdev, fiu); fiu->dev = dev; - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "control"); - regbase = devm_ioremap_resource(dev, res); + regbase = devm_platform_ioremap_resource_byname(pdev, "control"); if (IS_ERR(regbase)) return PTR_ERR(regbase); diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c index d6a65a989ef8..1c1991a26c15 100644 --- a/drivers/spi/spi-nxp-fspi.c +++ b/drivers/spi/spi-nxp-fspi.c @@ -924,7 +924,7 @@ static int nxp_fspi_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) static void erratum_err050568(struct nxp_fspi *f) { - const struct soc_device_attribute ls1028a_soc_attr[] = { + static const struct soc_device_attribute ls1028a_soc_attr[] = { { .family = "QorIQ LS1028A" }, { /* sentinel */ } }; diff --git a/drivers/spi/spi-pci1xxxx.c b/drivers/spi/spi-pci1xxxx.c new file mode 100644 index 000000000000..a31c3b612a43 --- /dev/null +++ b/drivers/spi/spi-pci1xxxx.c @@ -0,0 +1,475 @@ +// SPDX-License-Identifier: GPL-2.0 +// PCI1xxxx SPI driver +// Copyright (C) 2022 Microchip Technology Inc. +// Authors: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com> +// Kumaravel Thiagarajan <Kumaravel.Thiagarajan@microchip.com> + + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> + +#define DRV_NAME "spi-pci1xxxx" + +#define SYS_FREQ_DEFAULT (62500000) + +#define PCI1XXXX_SPI_MAX_CLOCK_HZ (30000000) +#define PCI1XXXX_SPI_CLK_20MHZ (20000000) +#define PCI1XXXX_SPI_CLK_15MHZ (15000000) +#define PCI1XXXX_SPI_CLK_12MHZ (12000000) +#define PCI1XXXX_SPI_CLK_10MHZ (10000000) +#define PCI1XXXX_SPI_MIN_CLOCK_HZ (2000000) + +#define PCI1XXXX_SPI_BUFFER_SIZE (320) + +#define SPI_MST_CTL_DEVSEL_MASK (GENMASK(27, 25)) +#define SPI_MST_CTL_CMD_LEN_MASK (GENMASK(16, 8)) +#define SPI_MST_CTL_SPEED_MASK (GENMASK(7, 5)) +#define SPI_MSI_VECTOR_SEL_MASK (GENMASK(4, 4)) + +#define SPI_MST_CTL_FORCE_CE (BIT(4)) +#define SPI_MST_CTL_MODE_SEL (BIT(2)) +#define SPI_MST_CTL_GO (BIT(0)) + +#define SPI_MST1_ADDR_BASE (0x800) + +/* x refers to SPI Host Controller HW instance id in the below macros - 0 or 1 */ + +#define SPI_MST_CMD_BUF_OFFSET(x) (((x) * SPI_MST1_ADDR_BASE) + 0x00) +#define SPI_MST_RSP_BUF_OFFSET(x) (((x) * SPI_MST1_ADDR_BASE) + 0x200) +#define SPI_MST_CTL_REG_OFFSET(x) (((x) * SPI_MST1_ADDR_BASE) + 0x400) +#define SPI_MST_EVENT_REG_OFFSET(x) (((x) * SPI_MST1_ADDR_BASE) + 0x420) +#define SPI_MST_EVENT_MASK_REG_OFFSET(x) (((x) * SPI_MST1_ADDR_BASE) + 0x424) +#define SPI_MST_PAD_CTL_REG_OFFSET(x) (((x) * SPI_MST1_ADDR_BASE) + 0x460) +#define SPIALERT_MST_DB_REG_OFFSET(x) (((x) * SPI_MST1_ADDR_BASE) + 0x464) +#define SPIALERT_MST_VAL_REG_OFFSET(x) (((x) * SPI_MST1_ADDR_BASE) + 0x468) +#define SPI_PCI_CTRL_REG_OFFSET(x) (((x) * SPI_MST1_ADDR_BASE) + 0x480) + +#define PCI1XXXX_IRQ_FLAGS (IRQF_NO_SUSPEND | IRQF_TRIGGER_NONE) +#define SPI_MAX_DATA_LEN 320 + +#define PCI1XXXX_SPI_TIMEOUT (msecs_to_jiffies(100)) + +#define SPI_INTR BIT(8) +#define SPI_FORCE_CE BIT(4) + +#define SPI_CHIP_SEL_COUNT 7 +#define VENDOR_ID_MCHP 0x1055 + +#define SPI_SUSPEND_CONFIG 0x101 +#define SPI_RESUME_CONFIG 0x303 + +struct pci1xxxx_spi_internal { + u8 hw_inst; + bool spi_xfer_in_progress; + int irq; + struct completion spi_xfer_done; + struct spi_master *spi_host; + struct pci1xxxx_spi *parent; + struct { + unsigned int dev_sel : 3; + unsigned int msi_vector_sel : 1; + } prev_val; +}; + +struct pci1xxxx_spi { + struct pci_dev *dev; + u8 total_hw_instances; + void __iomem *reg_base; + struct pci1xxxx_spi_internal *spi_int[]; +}; + +static const struct pci_device_id pci1xxxx_spi_pci_id_table[] = { + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa004, PCI_ANY_ID, 0x0001), 0, 0, 0x02}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa004, PCI_ANY_ID, 0x0002), 0, 0, 0x01}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa004, PCI_ANY_ID, 0x0003), 0, 0, 0x11}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa004, PCI_ANY_ID, PCI_ANY_ID), 0, 0, 0x01}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa014, PCI_ANY_ID, 0x0001), 0, 0, 0x02}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa014, PCI_ANY_ID, 0x0002), 0, 0, 0x01}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa014, PCI_ANY_ID, 0x0003), 0, 0, 0x11}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa014, PCI_ANY_ID, PCI_ANY_ID), 0, 0, 0x01}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa024, PCI_ANY_ID, 0x0001), 0, 0, 0x02}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa024, PCI_ANY_ID, 0x0002), 0, 0, 0x01}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa024, PCI_ANY_ID, 0x0003), 0, 0, 0x11}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa024, PCI_ANY_ID, PCI_ANY_ID), 0, 0, 0x01}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa034, PCI_ANY_ID, 0x0001), 0, 0, 0x02}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa034, PCI_ANY_ID, 0x0002), 0, 0, 0x01}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa034, PCI_ANY_ID, 0x0003), 0, 0, 0x11}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa034, PCI_ANY_ID, PCI_ANY_ID), 0, 0, 0x01}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa044, PCI_ANY_ID, 0x0001), 0, 0, 0x02}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa044, PCI_ANY_ID, 0x0002), 0, 0, 0x01}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa044, PCI_ANY_ID, 0x0003), 0, 0, 0x11}, + { PCI_DEVICE_SUB(VENDOR_ID_MCHP, 0xa044, PCI_ANY_ID, PCI_ANY_ID), 0, 0, 0x01}, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, pci1xxxx_spi_pci_id_table); + +static void pci1xxxx_spi_set_cs(struct spi_device *spi, bool enable) +{ + struct pci1xxxx_spi_internal *p = spi_controller_get_devdata(spi->controller); + struct pci1xxxx_spi *par = p->parent; + u32 regval; + + /* Set the DEV_SEL bits of the SPI_MST_CTL_REG */ + regval = readl(par->reg_base + SPI_MST_CTL_REG_OFFSET(p->hw_inst)); + if (enable) { + regval &= ~SPI_MST_CTL_DEVSEL_MASK; + regval |= (spi->chip_select << 25); + writel(regval, + par->reg_base + SPI_MST_CTL_REG_OFFSET(p->hw_inst)); + } else { + regval &= ~(spi->chip_select << 25); + writel(regval, + par->reg_base + SPI_MST_CTL_REG_OFFSET(p->hw_inst)); + + } +} + +static u8 pci1xxxx_get_clock_div(u32 hz) +{ + u8 val = 0; + + if (hz >= PCI1XXXX_SPI_MAX_CLOCK_HZ) + val = 2; + else if ((hz < PCI1XXXX_SPI_MAX_CLOCK_HZ) && (hz >= PCI1XXXX_SPI_CLK_20MHZ)) + val = 3; + else if ((hz < PCI1XXXX_SPI_CLK_20MHZ) && (hz >= PCI1XXXX_SPI_CLK_15MHZ)) + val = 4; + else if ((hz < PCI1XXXX_SPI_CLK_15MHZ) && (hz >= PCI1XXXX_SPI_CLK_12MHZ)) + val = 5; + else if ((hz < PCI1XXXX_SPI_CLK_12MHZ) && (hz >= PCI1XXXX_SPI_CLK_10MHZ)) + val = 6; + else if ((hz < PCI1XXXX_SPI_CLK_10MHZ) && (hz >= PCI1XXXX_SPI_MIN_CLOCK_HZ)) + val = 7; + else + val = 2; + + return val; +} + +static int pci1xxxx_spi_transfer_one(struct spi_controller *spi_ctlr, + struct spi_device *spi, struct spi_transfer *xfer) +{ + struct pci1xxxx_spi_internal *p = spi_controller_get_devdata(spi_ctlr); + int mode, len, loop_iter, transfer_len; + struct pci1xxxx_spi *par = p->parent; + unsigned long bytes_transfered; + unsigned long bytes_recvd; + unsigned long loop_count; + u8 *rx_buf, result; + const u8 *tx_buf; + u32 regval; + u8 clkdiv; + + p->spi_xfer_in_progress = true; + mode = spi->mode; + clkdiv = pci1xxxx_get_clock_div(xfer->speed_hz); + tx_buf = xfer->tx_buf; + rx_buf = xfer->rx_buf; + transfer_len = xfer->len; + regval = readl(par->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + writel(regval, par->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + + if (tx_buf) { + bytes_transfered = 0; + bytes_recvd = 0; + loop_count = transfer_len / SPI_MAX_DATA_LEN; + if (transfer_len % SPI_MAX_DATA_LEN != 0) + loop_count += 1; + + for (loop_iter = 0; loop_iter < loop_count; loop_iter++) { + len = SPI_MAX_DATA_LEN; + if ((transfer_len % SPI_MAX_DATA_LEN != 0) && + (loop_iter == loop_count - 1)) + len = transfer_len % SPI_MAX_DATA_LEN; + + reinit_completion(&p->spi_xfer_done); + memcpy_toio(par->reg_base + SPI_MST_CMD_BUF_OFFSET(p->hw_inst), + &tx_buf[bytes_transfered], len); + bytes_transfered += len; + regval = readl(par->reg_base + + SPI_MST_CTL_REG_OFFSET(p->hw_inst)); + regval &= ~(SPI_MST_CTL_MODE_SEL | SPI_MST_CTL_CMD_LEN_MASK | + SPI_MST_CTL_SPEED_MASK); + + if (mode == SPI_MODE_3) + regval |= SPI_MST_CTL_MODE_SEL; + else + regval &= ~SPI_MST_CTL_MODE_SEL; + + regval |= ((clkdiv << 5) | SPI_FORCE_CE | (len << 8)); + regval &= ~SPI_MST_CTL_CMD_LEN_MASK; + writel(regval, par->reg_base + + SPI_MST_CTL_REG_OFFSET(p->hw_inst)); + regval = readl(par->reg_base + + SPI_MST_CTL_REG_OFFSET(p->hw_inst)); + regval |= SPI_MST_CTL_GO; + writel(regval, par->reg_base + + SPI_MST_CTL_REG_OFFSET(p->hw_inst)); + + /* Wait for DMA_TERM interrupt */ + result = wait_for_completion_timeout(&p->spi_xfer_done, + PCI1XXXX_SPI_TIMEOUT); + if (!result) + return -ETIMEDOUT; + + if (rx_buf) { + memcpy_fromio(&rx_buf[bytes_recvd], par->reg_base + + SPI_MST_RSP_BUF_OFFSET(p->hw_inst), len); + bytes_recvd += len; + } + } + } + + regval = readl(par->reg_base + SPI_MST_CTL_REG_OFFSET(p->hw_inst)); + regval &= ~SPI_FORCE_CE; + writel(regval, par->reg_base + SPI_MST_CTL_REG_OFFSET(p->hw_inst)); + p->spi_xfer_in_progress = false; + + return 0; +} + +static irqreturn_t pci1xxxx_spi_isr(int irq, void *dev) +{ + struct pci1xxxx_spi_internal *p = dev; + irqreturn_t spi_int_fired = IRQ_NONE; + u32 regval; + + /* Clear the SPI GO_BIT Interrupt */ + regval = readl(p->parent->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + if (regval & SPI_INTR) { + /* Clear xfer_done */ + complete(&p->spi_xfer_done); + spi_int_fired = IRQ_HANDLED; + } + + writel(regval, p->parent->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + + return spi_int_fired; +} + +static int pci1xxxx_spi_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + u8 hw_inst_cnt, iter, start, only_sec_inst; + struct pci1xxxx_spi_internal *spi_sub_ptr; + struct device *dev = &pdev->dev; + struct pci1xxxx_spi *spi_bus; + struct spi_master *spi_host; + u32 regval; + int ret; + + hw_inst_cnt = ent->driver_data & 0x0f; + start = (ent->driver_data & 0xf0) >> 4; + if (start == 1) + only_sec_inst = 1; + else + only_sec_inst = 0; + + spi_bus = devm_kzalloc(&pdev->dev, + struct_size(spi_bus, spi_int, hw_inst_cnt), + GFP_KERNEL); + if (!spi_bus) + return -ENOMEM; + + spi_bus->dev = pdev; + spi_bus->total_hw_instances = hw_inst_cnt; + pci_set_master(pdev); + + for (iter = 0; iter < hw_inst_cnt; iter++) { + spi_bus->spi_int[iter] = devm_kzalloc(&pdev->dev, + sizeof(struct pci1xxxx_spi_internal), + GFP_KERNEL); + spi_sub_ptr = spi_bus->spi_int[iter]; + spi_sub_ptr->spi_host = devm_spi_alloc_master(dev, sizeof(struct spi_master)); + if (!spi_sub_ptr->spi_host) + return -ENOMEM; + + spi_sub_ptr->parent = spi_bus; + spi_sub_ptr->spi_xfer_in_progress = false; + + if (!iter) { + ret = pcim_enable_device(pdev); + if (ret) + return -ENOMEM; + + ret = pci_request_regions(pdev, DRV_NAME); + if (ret) + return -ENOMEM; + + spi_bus->reg_base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0)); + if (!spi_bus->reg_base) { + ret = -EINVAL; + goto error; + } + + ret = pci_alloc_irq_vectors(pdev, hw_inst_cnt, hw_inst_cnt, + PCI_IRQ_ALL_TYPES); + if (ret < 0) { + dev_err(&pdev->dev, "Error allocating MSI vectors\n"); + goto error; + } + + init_completion(&spi_sub_ptr->spi_xfer_done); + /* Initialize Interrupts - SPI_INT */ + regval = readl(spi_bus->reg_base + + SPI_MST_EVENT_MASK_REG_OFFSET(spi_sub_ptr->hw_inst)); + regval &= ~SPI_INTR; + writel(regval, spi_bus->reg_base + + SPI_MST_EVENT_MASK_REG_OFFSET(spi_sub_ptr->hw_inst)); + spi_sub_ptr->irq = pci_irq_vector(pdev, 0); + + ret = devm_request_irq(&pdev->dev, spi_sub_ptr->irq, + pci1xxxx_spi_isr, PCI1XXXX_IRQ_FLAGS, + pci_name(pdev), spi_sub_ptr); + if (ret < 0) { + dev_err(&pdev->dev, "Unable to request irq : %d", + spi_sub_ptr->irq); + ret = -ENODEV; + goto error; + } + + /* This register is only applicable for 1st instance */ + regval = readl(spi_bus->reg_base + SPI_PCI_CTRL_REG_OFFSET(0)); + if (!only_sec_inst) + regval |= (BIT(4)); + else + regval &= ~(BIT(4)); + + writel(regval, spi_bus->reg_base + SPI_PCI_CTRL_REG_OFFSET(0)); + } + + spi_sub_ptr->hw_inst = start++; + + if (iter == 1) { + init_completion(&spi_sub_ptr->spi_xfer_done); + /* Initialize Interrupts - SPI_INT */ + regval = readl(spi_bus->reg_base + + SPI_MST_EVENT_MASK_REG_OFFSET(spi_sub_ptr->hw_inst)); + regval &= ~SPI_INTR; + writel(regval, spi_bus->reg_base + + SPI_MST_EVENT_MASK_REG_OFFSET(spi_sub_ptr->hw_inst)); + spi_sub_ptr->irq = pci_irq_vector(pdev, iter); + ret = devm_request_irq(&pdev->dev, spi_sub_ptr->irq, + pci1xxxx_spi_isr, PCI1XXXX_IRQ_FLAGS, + pci_name(pdev), spi_sub_ptr); + if (ret < 0) { + dev_err(&pdev->dev, "Unable to request irq : %d", + spi_sub_ptr->irq); + ret = -ENODEV; + goto error; + } + } + + spi_host = spi_sub_ptr->spi_host; + spi_host->num_chipselect = SPI_CHIP_SEL_COUNT; + spi_host->mode_bits = SPI_MODE_0 | SPI_MODE_3 | SPI_RX_DUAL | + SPI_TX_DUAL | SPI_LOOP; + spi_host->transfer_one = pci1xxxx_spi_transfer_one; + spi_host->set_cs = pci1xxxx_spi_set_cs; + spi_host->bits_per_word_mask = SPI_BPW_MASK(8); + spi_host->max_speed_hz = PCI1XXXX_SPI_MAX_CLOCK_HZ; + spi_host->min_speed_hz = PCI1XXXX_SPI_MIN_CLOCK_HZ; + spi_host->flags = SPI_MASTER_MUST_TX; + spi_master_set_devdata(spi_host, spi_sub_ptr); + ret = devm_spi_register_master(dev, spi_host); + if (ret) + goto error; + } + pci_set_drvdata(pdev, spi_bus); + + return 0; + +error: + pci_release_regions(pdev); + return ret; +} + +static void store_restore_config(struct pci1xxxx_spi *spi_ptr, + struct pci1xxxx_spi_internal *spi_sub_ptr, + u8 inst, bool store) +{ + u32 regval; + + if (store) { + regval = readl(spi_ptr->reg_base + + SPI_MST_CTL_REG_OFFSET(spi_sub_ptr->hw_inst)); + regval &= SPI_MST_CTL_DEVSEL_MASK; + spi_sub_ptr->prev_val.dev_sel = (regval >> 25) & 7; + regval = readl(spi_ptr->reg_base + + SPI_PCI_CTRL_REG_OFFSET(spi_sub_ptr->hw_inst)); + regval &= SPI_MSI_VECTOR_SEL_MASK; + spi_sub_ptr->prev_val.msi_vector_sel = (regval >> 4) & 1; + } else { + regval = readl(spi_ptr->reg_base + SPI_MST_CTL_REG_OFFSET(inst)); + regval &= ~SPI_MST_CTL_DEVSEL_MASK; + regval |= (spi_sub_ptr->prev_val.dev_sel << 25); + writel(regval, + spi_ptr->reg_base + SPI_MST_CTL_REG_OFFSET(inst)); + writel((spi_sub_ptr->prev_val.msi_vector_sel << 4), + spi_ptr->reg_base + SPI_PCI_CTRL_REG_OFFSET(inst)); + } +} + +static int pci1xxxx_spi_resume(struct device *dev) +{ + struct pci1xxxx_spi *spi_ptr = dev_get_drvdata(dev); + struct pci1xxxx_spi_internal *spi_sub_ptr; + u32 regval = SPI_RESUME_CONFIG; + u8 iter; + + for (iter = 0; iter < spi_ptr->total_hw_instances; iter++) { + spi_sub_ptr = spi_ptr->spi_int[iter]; + spi_master_resume(spi_sub_ptr->spi_host); + writel(regval, spi_ptr->reg_base + + SPI_MST_EVENT_MASK_REG_OFFSET(iter)); + + /* Restore config at resume */ + store_restore_config(spi_ptr, spi_sub_ptr, iter, 0); + } + + return 0; +} + +static int pci1xxxx_spi_suspend(struct device *dev) +{ + struct pci1xxxx_spi *spi_ptr = dev_get_drvdata(dev); + struct pci1xxxx_spi_internal *spi_sub_ptr; + u32 reg1 = SPI_SUSPEND_CONFIG; + u8 iter; + + for (iter = 0; iter < spi_ptr->total_hw_instances; iter++) { + spi_sub_ptr = spi_ptr->spi_int[iter]; + + while (spi_sub_ptr->spi_xfer_in_progress) + msleep(20); + + /* Store existing config before suspend */ + store_restore_config(spi_ptr, spi_sub_ptr, iter, 1); + spi_master_suspend(spi_sub_ptr->spi_host); + writel(reg1, spi_ptr->reg_base + + SPI_MST_EVENT_MASK_REG_OFFSET(iter)); + } + + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(spi_pm_ops, pci1xxxx_spi_suspend, + pci1xxxx_spi_resume); + +static struct pci_driver pci1xxxx_spi_driver = { + .name = DRV_NAME, + .id_table = pci1xxxx_spi_pci_id_table, + .probe = pci1xxxx_spi_probe, + .driver = { + .pm = pm_sleep_ptr(&spi_pm_ops), + }, +}; + +module_pci_driver(pci1xxxx_spi_driver); + +MODULE_DESCRIPTION("Microchip Technology Inc. pci1xxxx SPI bus driver"); +MODULE_AUTHOR("Tharun Kumar P<tharunkumar.pasumarthi@microchip.com>"); +MODULE_AUTHOR("Kumaravel Thiagarajan<kumaravel.thiagarajan@microchip.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 2bf21c2e7a52..32cc82a89ec1 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -20,7 +20,6 @@ #include <linux/module.h> #include <linux/mod_devicetable.h> #include <linux/of.h> -#include <linux/pci.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/property.h> @@ -1322,134 +1321,11 @@ static void cleanup(struct spi_device *spi) kfree(chip); } -#ifdef CONFIG_ACPI -static const struct acpi_device_id pxa2xx_spi_acpi_match[] = { - { "INT33C0", LPSS_LPT_SSP }, - { "INT33C1", LPSS_LPT_SSP }, - { "INT3430", LPSS_LPT_SSP }, - { "INT3431", LPSS_LPT_SSP }, - { "80860F0E", LPSS_BYT_SSP }, - { "8086228E", LPSS_BSW_SSP }, - { }, -}; -MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match); -#endif - -/* - * PCI IDs of compound devices that integrate both host controller and private - * integrated DMA engine. Please note these are not used in module - * autoloading and probing in this module but matching the LPSS SSP type. - */ -static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = { - /* SPT-LP */ - { PCI_VDEVICE(INTEL, 0x9d29), LPSS_SPT_SSP }, - { PCI_VDEVICE(INTEL, 0x9d2a), LPSS_SPT_SSP }, - /* SPT-H */ - { PCI_VDEVICE(INTEL, 0xa129), LPSS_SPT_SSP }, - { PCI_VDEVICE(INTEL, 0xa12a), LPSS_SPT_SSP }, - /* KBL-H */ - { PCI_VDEVICE(INTEL, 0xa2a9), LPSS_SPT_SSP }, - { PCI_VDEVICE(INTEL, 0xa2aa), LPSS_SPT_SSP }, - /* CML-V */ - { PCI_VDEVICE(INTEL, 0xa3a9), LPSS_SPT_SSP }, - { PCI_VDEVICE(INTEL, 0xa3aa), LPSS_SPT_SSP }, - /* BXT A-Step */ - { PCI_VDEVICE(INTEL, 0x0ac2), LPSS_BXT_SSP }, - { PCI_VDEVICE(INTEL, 0x0ac4), LPSS_BXT_SSP }, - { PCI_VDEVICE(INTEL, 0x0ac6), LPSS_BXT_SSP }, - /* BXT B-Step */ - { PCI_VDEVICE(INTEL, 0x1ac2), LPSS_BXT_SSP }, - { PCI_VDEVICE(INTEL, 0x1ac4), LPSS_BXT_SSP }, - { PCI_VDEVICE(INTEL, 0x1ac6), LPSS_BXT_SSP }, - /* GLK */ - { PCI_VDEVICE(INTEL, 0x31c2), LPSS_BXT_SSP }, - { PCI_VDEVICE(INTEL, 0x31c4), LPSS_BXT_SSP }, - { PCI_VDEVICE(INTEL, 0x31c6), LPSS_BXT_SSP }, - /* ICL-LP */ - { PCI_VDEVICE(INTEL, 0x34aa), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x34ab), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x34fb), LPSS_CNL_SSP }, - /* EHL */ - { PCI_VDEVICE(INTEL, 0x4b2a), LPSS_BXT_SSP }, - { PCI_VDEVICE(INTEL, 0x4b2b), LPSS_BXT_SSP }, - { PCI_VDEVICE(INTEL, 0x4b37), LPSS_BXT_SSP }, - /* JSL */ - { PCI_VDEVICE(INTEL, 0x4daa), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x4dab), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x4dfb), LPSS_CNL_SSP }, - /* TGL-H */ - { PCI_VDEVICE(INTEL, 0x43aa), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x43ab), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x43fb), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x43fd), LPSS_CNL_SSP }, - /* ADL-P */ - { PCI_VDEVICE(INTEL, 0x51aa), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x51ab), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x51fb), LPSS_CNL_SSP }, - /* ADL-M */ - { PCI_VDEVICE(INTEL, 0x54aa), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x54ab), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x54fb), LPSS_CNL_SSP }, - /* APL */ - { PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP }, - { PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP }, - { PCI_VDEVICE(INTEL, 0x5ac6), LPSS_BXT_SSP }, - /* RPL-S */ - { PCI_VDEVICE(INTEL, 0x7a2a), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x7a2b), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x7a79), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x7a7b), LPSS_CNL_SSP }, - /* ADL-S */ - { PCI_VDEVICE(INTEL, 0x7aaa), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x7aab), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x7af9), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x7afb), LPSS_CNL_SSP }, - /* MTL-P */ - { PCI_VDEVICE(INTEL, 0x7e27), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x7e30), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x7e46), LPSS_CNL_SSP }, - /* CNL-LP */ - { PCI_VDEVICE(INTEL, 0x9daa), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x9dab), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x9dfb), LPSS_CNL_SSP }, - /* CNL-H */ - { PCI_VDEVICE(INTEL, 0xa32a), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0xa32b), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0xa37b), LPSS_CNL_SSP }, - /* CML-LP */ - { PCI_VDEVICE(INTEL, 0x02aa), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x02ab), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x02fb), LPSS_CNL_SSP }, - /* CML-H */ - { PCI_VDEVICE(INTEL, 0x06aa), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x06ab), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0x06fb), LPSS_CNL_SSP }, - /* TGL-LP */ - { PCI_VDEVICE(INTEL, 0xa0aa), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0xa0ab), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0xa0de), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0xa0df), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0xa0fb), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0xa0fd), LPSS_CNL_SSP }, - { PCI_VDEVICE(INTEL, 0xa0fe), LPSS_CNL_SSP }, - { }, -}; - -static const struct of_device_id pxa2xx_spi_of_match[] = { - { .compatible = "marvell,mmp2-ssp", .data = (void *)MMP2_SSP }, - {}, -}; -MODULE_DEVICE_TABLE(of, pxa2xx_spi_of_match); - -#ifdef CONFIG_PCI - static bool pxa2xx_spi_idma_filter(struct dma_chan *chan, void *param) { return param == chan->device->dev; } -#endif /* CONFIG_PCI */ - static struct pxa2xx_spi_controller * pxa2xx_spi_init_pdata(struct platform_device *pdev) { @@ -1458,46 +1334,51 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev) struct device *parent = dev->parent; struct ssp_device *ssp; struct resource *res; - struct pci_dev *pcidev = dev_is_pci(parent) ? to_pci_dev(parent) : NULL; - const struct pci_device_id *pcidev_id = NULL; - enum pxa_ssp_type type; + enum pxa_ssp_type type = SSP_UNDEFINED; const void *match; + bool is_lpss_priv; int status; u64 uid; - if (pcidev) - pcidev_id = pci_match_id(pxa2xx_spi_pci_compound_match, pcidev); + is_lpss_priv = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lpss_priv"); - match = device_get_match_data(&pdev->dev); + match = device_get_match_data(dev); if (match) type = (enum pxa_ssp_type)match; - else if (pcidev_id) - type = (enum pxa_ssp_type)pcidev_id->driver_data; - else + else if (is_lpss_priv) { + u32 value; + + status = device_property_read_u32(dev, "intel,spi-pxa2xx-type", &value); + if (status) + return ERR_PTR(status); + + type = (enum pxa_ssp_type)value; + } + + /* Validate the SSP type correctness */ + if (!(type > SSP_UNDEFINED && type < SSP_MAX)) return ERR_PTR(-EINVAL); - pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) return ERR_PTR(-ENOMEM); ssp = &pdata->ssp; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ssp->mmio_base = devm_ioremap_resource(&pdev->dev, res); + ssp->mmio_base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); if (IS_ERR(ssp->mmio_base)) return ERR_CAST(ssp->mmio_base); ssp->phys_base = res->start; -#ifdef CONFIG_PCI - if (pcidev_id) { + /* Platforms with iDMA 64-bit */ + if (is_lpss_priv) { pdata->tx_param = parent; pdata->rx_param = parent; pdata->dma_filter = pxa2xx_spi_idma_filter; } -#endif - ssp->clk = devm_clk_get(&pdev->dev, NULL); + ssp->clk = devm_clk_get(dev, NULL); if (IS_ERR(ssp->clk)) return ERR_CAST(ssp->clk); @@ -1506,7 +1387,7 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev) return ERR_PTR(ssp->irq); ssp->type = type; - ssp->dev = &pdev->dev; + ssp->dev = dev; status = acpi_dev_uid_to_integer(ACPI_COMPANION(dev), &uid); if (status) @@ -1514,7 +1395,7 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev) else ssp->port_id = uid; - pdata->is_slave = device_property_read_bool(&pdev->dev, "spi-slave"); + pdata->is_slave = device_property_read_bool(dev, "spi-slave"); pdata->num_chipselect = 1; pdata->enable_dma = true; pdata->dma_burst_size = 1; @@ -1807,7 +1688,6 @@ static int pxa2xx_spi_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_SLEEP static int pxa2xx_spi_suspend(struct device *dev) { struct driver_data *drv_data = dev_get_drvdata(dev); @@ -1842,9 +1722,7 @@ static int pxa2xx_spi_resume(struct device *dev) /* Start the queue running */ return spi_controller_resume(drv_data->controller); } -#endif -#ifdef CONFIG_PM static int pxa2xx_spi_runtime_suspend(struct device *dev) { struct driver_data *drv_data = dev_get_drvdata(dev); @@ -1859,18 +1737,35 @@ static int pxa2xx_spi_runtime_resume(struct device *dev) return clk_prepare_enable(drv_data->ssp->clk); } -#endif static const struct dev_pm_ops pxa2xx_spi_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(pxa2xx_spi_suspend, pxa2xx_spi_resume) - SET_RUNTIME_PM_OPS(pxa2xx_spi_runtime_suspend, - pxa2xx_spi_runtime_resume, NULL) + SYSTEM_SLEEP_PM_OPS(pxa2xx_spi_suspend, pxa2xx_spi_resume) + RUNTIME_PM_OPS(pxa2xx_spi_runtime_suspend, pxa2xx_spi_runtime_resume, NULL) +}; + +#ifdef CONFIG_ACPI +static const struct acpi_device_id pxa2xx_spi_acpi_match[] = { + { "80860F0E", LPSS_BYT_SSP }, + { "8086228E", LPSS_BSW_SSP }, + { "INT33C0", LPSS_LPT_SSP }, + { "INT33C1", LPSS_LPT_SSP }, + { "INT3430", LPSS_LPT_SSP }, + { "INT3431", LPSS_LPT_SSP }, + {} +}; +MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match); +#endif + +static const struct of_device_id pxa2xx_spi_of_match[] = { + { .compatible = "marvell,mmp2-ssp", .data = (void *)MMP2_SSP }, + {} }; +MODULE_DEVICE_TABLE(of, pxa2xx_spi_of_match); static struct platform_driver driver = { .driver = { .name = "pxa2xx-spi", - .pm = &pxa2xx_spi_pm_ops, + .pm = pm_ptr(&pxa2xx_spi_pm_ops), .acpi_match_table = ACPI_PTR(pxa2xx_spi_acpi_match), .of_match_table = of_match_ptr(pxa2xx_spi_of_match), }, diff --git a/drivers/spi/spi-sc18is602.c b/drivers/spi/spi-sc18is602.c index 5d27ee482237..983b3621bc2a 100644 --- a/drivers/spi/spi-sc18is602.c +++ b/drivers/spi/spi-sc18is602.c @@ -235,9 +235,9 @@ static int sc18is602_setup(struct spi_device *spi) return 0; } -static int sc18is602_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int sc18is602_probe(struct i2c_client *client) { + const struct i2c_device_id *id = i2c_client_get_device_id(client); struct device *dev = &client->dev; struct device_node *np = dev->of_node; struct sc18is602_platform_data *pdata = dev_get_platdata(dev); @@ -337,7 +337,7 @@ static struct i2c_driver sc18is602_driver = { .name = "sc18is602", .of_match_table = of_match_ptr(sc18is602_of_match), }, - .probe = sc18is602_probe, + .probe_new = sc18is602_probe, .id_table = sc18is602_id, }; diff --git a/drivers/spi/spi-sn-f-ospi.c b/drivers/spi/spi-sn-f-ospi.c new file mode 100644 index 000000000000..348c6e1edd38 --- /dev/null +++ b/drivers/spi/spi-sn-f-ospi.c @@ -0,0 +1,703 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Socionext SPI flash controller F_OSPI driver + * Copyright (C) 2021 Socionext Inc. + */ + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi-mem.h> + +/* Registers */ +#define OSPI_PROT_CTL_INDIR 0x00 +#define OSPI_PROT_MODE_DATA_MASK GENMASK(31, 30) +#define OSPI_PROT_MODE_ALT_MASK GENMASK(29, 28) +#define OSPI_PROT_MODE_ADDR_MASK GENMASK(27, 26) +#define OSPI_PROT_MODE_CODE_MASK GENMASK(25, 24) +#define OSPI_PROT_MODE_SINGLE 0 +#define OSPI_PROT_MODE_DUAL 1 +#define OSPI_PROT_MODE_QUAD 2 +#define OSPI_PROT_MODE_OCTAL 3 +#define OSPI_PROT_DATA_RATE_DATA BIT(23) +#define OSPI_PROT_DATA_RATE_ALT BIT(22) +#define OSPI_PROT_DATA_RATE_ADDR BIT(21) +#define OSPI_PROT_DATA_RATE_CODE BIT(20) +#define OSPI_PROT_SDR 0 +#define OSPI_PROT_DDR 1 +#define OSPI_PROT_BIT_POS_DATA BIT(19) +#define OSPI_PROT_BIT_POS_ALT BIT(18) +#define OSPI_PROT_BIT_POS_ADDR BIT(17) +#define OSPI_PROT_BIT_POS_CODE BIT(16) +#define OSPI_PROT_SAMP_EDGE BIT(12) +#define OSPI_PROT_DATA_UNIT_MASK GENMASK(11, 10) +#define OSPI_PROT_DATA_UNIT_1B 0 +#define OSPI_PROT_DATA_UNIT_2B 1 +#define OSPI_PROT_DATA_UNIT_4B 3 +#define OSPI_PROT_TRANS_DIR_WRITE BIT(9) +#define OSPI_PROT_DATA_EN BIT(8) +#define OSPI_PROT_ALT_SIZE_MASK GENMASK(7, 5) +#define OSPI_PROT_ADDR_SIZE_MASK GENMASK(4, 2) +#define OSPI_PROT_CODE_SIZE_MASK GENMASK(1, 0) + +#define OSPI_CLK_CTL 0x10 +#define OSPI_CLK_CTL_BOOT_INT_CLK_EN BIT(16) +#define OSPI_CLK_CTL_PHA BIT(12) +#define OSPI_CLK_CTL_PHA_180 0 +#define OSPI_CLK_CTL_PHA_90 1 +#define OSPI_CLK_CTL_DIV GENMASK(9, 8) +#define OSPI_CLK_CTL_DIV_1 0 +#define OSPI_CLK_CTL_DIV_2 1 +#define OSPI_CLK_CTL_DIV_4 2 +#define OSPI_CLK_CTL_DIV_8 3 +#define OSPI_CLK_CTL_INT_CLK_EN BIT(0) + +#define OSPI_CS_CTL1 0x14 +#define OSPI_CS_CTL2 0x18 +#define OSPI_SSEL 0x20 +#define OSPI_CMD_IDX_INDIR 0x40 +#define OSPI_ADDR 0x50 +#define OSPI_ALT_INDIR 0x60 +#define OSPI_DMY_INDIR 0x70 +#define OSPI_DAT 0x80 +#define OSPI_DAT_SWP_INDIR 0x90 + +#define OSPI_DAT_SIZE_INDIR 0xA0 +#define OSPI_DAT_SIZE_EN BIT(15) +#define OSPI_DAT_SIZE_MASK GENMASK(10, 0) +#define OSPI_DAT_SIZE_MAX (OSPI_DAT_SIZE_MASK + 1) + +#define OSPI_TRANS_CTL 0xC0 +#define OSPI_TRANS_CTL_STOP_REQ BIT(1) /* RW1AC */ +#define OSPI_TRANS_CTL_START_REQ BIT(0) /* RW1AC */ + +#define OSPI_ACC_MODE 0xC4 +#define OSPI_ACC_MODE_BOOT_DISABLE BIT(0) + +#define OSPI_SWRST 0xD0 +#define OSPI_SWRST_INDIR_WRITE_FIFO BIT(9) /* RW1AC */ +#define OSPI_SWRST_INDIR_READ_FIFO BIT(8) /* RW1AC */ + +#define OSPI_STAT 0xE0 +#define OSPI_STAT_IS_AXI_WRITING BIT(10) +#define OSPI_STAT_IS_AXI_READING BIT(9) +#define OSPI_STAT_IS_SPI_INT_CLK_STOP BIT(4) +#define OSPI_STAT_IS_SPI_IDLE BIT(3) + +#define OSPI_IRQ 0xF0 +#define OSPI_IRQ_CS_DEASSERT BIT(8) +#define OSPI_IRQ_WRITE_BUF_READY BIT(2) +#define OSPI_IRQ_READ_BUF_READY BIT(1) +#define OSPI_IRQ_CS_TRANS_COMP BIT(0) +#define OSPI_IRQ_ALL \ + (OSPI_IRQ_CS_DEASSERT | OSPI_IRQ_WRITE_BUF_READY \ + | OSPI_IRQ_READ_BUF_READY | OSPI_IRQ_CS_TRANS_COMP) + +#define OSPI_IRQ_STAT_EN 0xF4 +#define OSPI_IRQ_SIG_EN 0xF8 + +/* Parameters */ +#define OSPI_NUM_CS 4 +#define OSPI_DUMMY_CYCLE_MAX 255 +#define OSPI_WAIT_MAX_MSEC 100 + +struct f_ospi { + void __iomem *base; + struct device *dev; + struct clk *clk; + struct mutex mlock; +}; + +static u32 f_ospi_get_dummy_cycle(const struct spi_mem_op *op) +{ + return (op->dummy.nbytes * 8) / op->dummy.buswidth; +} + +static void f_ospi_clear_irq(struct f_ospi *ospi) +{ + writel(OSPI_IRQ_CS_DEASSERT | OSPI_IRQ_CS_TRANS_COMP, + ospi->base + OSPI_IRQ); +} + +static void f_ospi_enable_irq_status(struct f_ospi *ospi, u32 irq_bits) +{ + u32 val; + + val = readl(ospi->base + OSPI_IRQ_STAT_EN); + val |= irq_bits; + writel(val, ospi->base + OSPI_IRQ_STAT_EN); +} + +static void f_ospi_disable_irq_status(struct f_ospi *ospi, u32 irq_bits) +{ + u32 val; + + val = readl(ospi->base + OSPI_IRQ_STAT_EN); + val &= ~irq_bits; + writel(val, ospi->base + OSPI_IRQ_STAT_EN); +} + +static void f_ospi_disable_irq_output(struct f_ospi *ospi, u32 irq_bits) +{ + u32 val; + + val = readl(ospi->base + OSPI_IRQ_SIG_EN); + val &= ~irq_bits; + writel(val, ospi->base + OSPI_IRQ_SIG_EN); +} + +static int f_ospi_prepare_config(struct f_ospi *ospi) +{ + u32 val, stat0, stat1; + + /* G4: Disable internal clock */ + val = readl(ospi->base + OSPI_CLK_CTL); + val &= ~(OSPI_CLK_CTL_BOOT_INT_CLK_EN | OSPI_CLK_CTL_INT_CLK_EN); + writel(val, ospi->base + OSPI_CLK_CTL); + + /* G5: Wait for stop */ + stat0 = OSPI_STAT_IS_AXI_WRITING | OSPI_STAT_IS_AXI_READING; + stat1 = OSPI_STAT_IS_SPI_IDLE | OSPI_STAT_IS_SPI_INT_CLK_STOP; + + return readl_poll_timeout(ospi->base + OSPI_STAT, + val, (val & (stat0 | stat1)) == stat1, + 0, OSPI_WAIT_MAX_MSEC); +} + +static int f_ospi_unprepare_config(struct f_ospi *ospi) +{ + u32 val; + + /* G11: Enable internal clock */ + val = readl(ospi->base + OSPI_CLK_CTL); + val |= OSPI_CLK_CTL_BOOT_INT_CLK_EN | OSPI_CLK_CTL_INT_CLK_EN; + writel(val, ospi->base + OSPI_CLK_CTL); + + /* G12: Wait for clock to start */ + return readl_poll_timeout(ospi->base + OSPI_STAT, + val, !(val & OSPI_STAT_IS_SPI_INT_CLK_STOP), + 0, OSPI_WAIT_MAX_MSEC); +} + +static void f_ospi_config_clk(struct f_ospi *ospi, u32 device_hz) +{ + long rate_hz = clk_get_rate(ospi->clk); + u32 div = DIV_ROUND_UP(rate_hz, device_hz); + u32 div_reg; + u32 val; + + if (rate_hz < device_hz) { + dev_warn(ospi->dev, "Device frequency too large: %d\n", + device_hz); + div_reg = OSPI_CLK_CTL_DIV_1; + } else { + if (div == 1) { + div_reg = OSPI_CLK_CTL_DIV_1; + } else if (div == 2) { + div_reg = OSPI_CLK_CTL_DIV_2; + } else if (div <= 4) { + div_reg = OSPI_CLK_CTL_DIV_4; + } else if (div <= 8) { + div_reg = OSPI_CLK_CTL_DIV_8; + } else { + dev_warn(ospi->dev, "Device frequency too small: %d\n", + device_hz); + div_reg = OSPI_CLK_CTL_DIV_8; + } + } + + /* + * G7: Set clock mode + * clock phase is fixed at 180 degrees and configure edge direction + * instead. + */ + val = readl(ospi->base + OSPI_CLK_CTL); + + val &= ~(OSPI_CLK_CTL_PHA | OSPI_CLK_CTL_DIV); + val |= FIELD_PREP(OSPI_CLK_CTL_PHA, OSPI_CLK_CTL_PHA_180) + | FIELD_PREP(OSPI_CLK_CTL_DIV, div_reg); + + writel(val, ospi->base + OSPI_CLK_CTL); +} + +static void f_ospi_config_dll(struct f_ospi *ospi) +{ + /* G8: Configure DLL, nothing */ +} + +static u8 f_ospi_get_mode(struct f_ospi *ospi, int width, int data_size) +{ + u8 mode = OSPI_PROT_MODE_SINGLE; + + switch (width) { + case 1: + mode = OSPI_PROT_MODE_SINGLE; + break; + case 2: + mode = OSPI_PROT_MODE_DUAL; + break; + case 4: + mode = OSPI_PROT_MODE_QUAD; + break; + case 8: + mode = OSPI_PROT_MODE_OCTAL; + break; + default: + if (data_size) + dev_err(ospi->dev, "Invalid buswidth: %d\n", width); + break; + } + + return mode; +} + +static void f_ospi_config_indir_protocol(struct f_ospi *ospi, + struct spi_mem *mem, + const struct spi_mem_op *op) +{ + struct spi_device *spi = mem->spi; + u8 mode; + u32 prot = 0, val; + int unit; + + /* Set one chip select */ + writel(BIT(spi->chip_select), ospi->base + OSPI_SSEL); + + mode = f_ospi_get_mode(ospi, op->cmd.buswidth, 1); + prot |= FIELD_PREP(OSPI_PROT_MODE_CODE_MASK, mode); + + mode = f_ospi_get_mode(ospi, op->addr.buswidth, op->addr.nbytes); + prot |= FIELD_PREP(OSPI_PROT_MODE_ADDR_MASK, mode); + + mode = f_ospi_get_mode(ospi, op->data.buswidth, op->data.nbytes); + prot |= FIELD_PREP(OSPI_PROT_MODE_DATA_MASK, mode); + + prot |= FIELD_PREP(OSPI_PROT_DATA_RATE_DATA, OSPI_PROT_SDR); + prot |= FIELD_PREP(OSPI_PROT_DATA_RATE_ALT, OSPI_PROT_SDR); + prot |= FIELD_PREP(OSPI_PROT_DATA_RATE_ADDR, OSPI_PROT_SDR); + prot |= FIELD_PREP(OSPI_PROT_DATA_RATE_CODE, OSPI_PROT_SDR); + + if (spi->mode & SPI_LSB_FIRST) + prot |= OSPI_PROT_BIT_POS_DATA | OSPI_PROT_BIT_POS_ALT + | OSPI_PROT_BIT_POS_ADDR | OSPI_PROT_BIT_POS_CODE; + + if (spi->mode & SPI_CPHA) + prot |= OSPI_PROT_SAMP_EDGE; + + /* Examine nbytes % 4 */ + switch (op->data.nbytes & 0x3) { + case 0: + unit = OSPI_PROT_DATA_UNIT_4B; + val = 0; + break; + case 2: + unit = OSPI_PROT_DATA_UNIT_2B; + val = OSPI_DAT_SIZE_EN | (op->data.nbytes - 1); + break; + default: + unit = OSPI_PROT_DATA_UNIT_1B; + val = OSPI_DAT_SIZE_EN | (op->data.nbytes - 1); + break; + } + prot |= FIELD_PREP(OSPI_PROT_DATA_UNIT_MASK, unit); + + switch (op->data.dir) { + case SPI_MEM_DATA_IN: + prot |= OSPI_PROT_DATA_EN; + break; + + case SPI_MEM_DATA_OUT: + prot |= OSPI_PROT_TRANS_DIR_WRITE | OSPI_PROT_DATA_EN; + break; + + case SPI_MEM_NO_DATA: + prot |= OSPI_PROT_TRANS_DIR_WRITE; + break; + + default: + dev_warn(ospi->dev, "Unsupported direction"); + break; + } + + prot |= FIELD_PREP(OSPI_PROT_ADDR_SIZE_MASK, op->addr.nbytes); + prot |= FIELD_PREP(OSPI_PROT_CODE_SIZE_MASK, 1); /* 1byte */ + + writel(prot, ospi->base + OSPI_PROT_CTL_INDIR); + writel(val, ospi->base + OSPI_DAT_SIZE_INDIR); +} + +static int f_ospi_indir_prepare_op(struct f_ospi *ospi, struct spi_mem *mem, + const struct spi_mem_op *op) +{ + struct spi_device *spi = mem->spi; + u32 irq_stat_en; + int ret; + + ret = f_ospi_prepare_config(ospi); + if (ret) + return ret; + + f_ospi_config_clk(ospi, spi->max_speed_hz); + + f_ospi_config_indir_protocol(ospi, mem, op); + + writel(f_ospi_get_dummy_cycle(op), ospi->base + OSPI_DMY_INDIR); + writel(op->addr.val, ospi->base + OSPI_ADDR); + writel(op->cmd.opcode, ospi->base + OSPI_CMD_IDX_INDIR); + + f_ospi_clear_irq(ospi); + + switch (op->data.dir) { + case SPI_MEM_DATA_IN: + irq_stat_en = OSPI_IRQ_READ_BUF_READY | OSPI_IRQ_CS_TRANS_COMP; + break; + + case SPI_MEM_DATA_OUT: + irq_stat_en = OSPI_IRQ_WRITE_BUF_READY | OSPI_IRQ_CS_TRANS_COMP; + break; + + case SPI_MEM_NO_DATA: + irq_stat_en = OSPI_IRQ_CS_TRANS_COMP; + break; + + default: + dev_warn(ospi->dev, "Unsupported direction"); + irq_stat_en = 0; + } + + f_ospi_disable_irq_status(ospi, ~irq_stat_en); + f_ospi_enable_irq_status(ospi, irq_stat_en); + + return f_ospi_unprepare_config(ospi); +} + +static void f_ospi_indir_start_xfer(struct f_ospi *ospi) +{ + /* Write only 1, auto cleared */ + writel(OSPI_TRANS_CTL_START_REQ, ospi->base + OSPI_TRANS_CTL); +} + +static void f_ospi_indir_stop_xfer(struct f_ospi *ospi) +{ + /* Write only 1, auto cleared */ + writel(OSPI_TRANS_CTL_STOP_REQ, ospi->base + OSPI_TRANS_CTL); +} + +static int f_ospi_indir_wait_xfer_complete(struct f_ospi *ospi) +{ + u32 val; + + return readl_poll_timeout(ospi->base + OSPI_IRQ, val, + val & OSPI_IRQ_CS_TRANS_COMP, + 0, OSPI_WAIT_MAX_MSEC); +} + +static int f_ospi_indir_read(struct f_ospi *ospi, struct spi_mem *mem, + const struct spi_mem_op *op) +{ + u8 *buf = op->data.buf.in; + u32 val; + int i, ret; + + mutex_lock(&ospi->mlock); + + /* E1-2: Prepare transfer operation */ + ret = f_ospi_indir_prepare_op(ospi, mem, op); + if (ret) + goto out; + + f_ospi_indir_start_xfer(ospi); + + /* E3-4: Wait for ready and read data */ + for (i = 0; i < op->data.nbytes; i++) { + ret = readl_poll_timeout(ospi->base + OSPI_IRQ, val, + val & OSPI_IRQ_READ_BUF_READY, + 0, OSPI_WAIT_MAX_MSEC); + if (ret) + goto out; + + buf[i] = readl(ospi->base + OSPI_DAT) & 0xFF; + } + + /* E5-6: Stop transfer if data size is nothing */ + if (!(readl(ospi->base + OSPI_DAT_SIZE_INDIR) & OSPI_DAT_SIZE_EN)) + f_ospi_indir_stop_xfer(ospi); + + /* E7-8: Wait for completion and clear */ + ret = f_ospi_indir_wait_xfer_complete(ospi); + if (ret) + goto out; + + writel(OSPI_IRQ_CS_TRANS_COMP, ospi->base + OSPI_IRQ); + + /* E9: Do nothing if data size is valid */ + if (readl(ospi->base + OSPI_DAT_SIZE_INDIR) & OSPI_DAT_SIZE_EN) + goto out; + + /* E10-11: Reset and check read fifo */ + writel(OSPI_SWRST_INDIR_READ_FIFO, ospi->base + OSPI_SWRST); + + ret = readl_poll_timeout(ospi->base + OSPI_SWRST, val, + !(val & OSPI_SWRST_INDIR_READ_FIFO), + 0, OSPI_WAIT_MAX_MSEC); +out: + mutex_unlock(&ospi->mlock); + + return ret; +} + +static int f_ospi_indir_write(struct f_ospi *ospi, struct spi_mem *mem, + const struct spi_mem_op *op) +{ + u8 *buf = (u8 *)op->data.buf.out; + u32 val; + int i, ret; + + mutex_lock(&ospi->mlock); + + /* F1-3: Prepare transfer operation */ + ret = f_ospi_indir_prepare_op(ospi, mem, op); + if (ret) + goto out; + + f_ospi_indir_start_xfer(ospi); + + if (!(readl(ospi->base + OSPI_PROT_CTL_INDIR) & OSPI_PROT_DATA_EN)) + goto nodata; + + /* F4-5: Wait for buffer ready and write data */ + for (i = 0; i < op->data.nbytes; i++) { + ret = readl_poll_timeout(ospi->base + OSPI_IRQ, val, + val & OSPI_IRQ_WRITE_BUF_READY, + 0, OSPI_WAIT_MAX_MSEC); + if (ret) + goto out; + + writel(buf[i], ospi->base + OSPI_DAT); + } + + /* F6-7: Stop transfer if data size is nothing */ + if (!(readl(ospi->base + OSPI_DAT_SIZE_INDIR) & OSPI_DAT_SIZE_EN)) + f_ospi_indir_stop_xfer(ospi); + +nodata: + /* F8-9: Wait for completion and clear */ + ret = f_ospi_indir_wait_xfer_complete(ospi); + if (ret) + goto out; + + writel(OSPI_IRQ_CS_TRANS_COMP, ospi->base + OSPI_IRQ); +out: + mutex_unlock(&ospi->mlock); + + return ret; +} + +static int f_ospi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct f_ospi *ospi = spi_controller_get_devdata(mem->spi->master); + int err = 0; + + switch (op->data.dir) { + case SPI_MEM_DATA_IN: + err = f_ospi_indir_read(ospi, mem, op); + break; + + case SPI_MEM_DATA_OUT: + fallthrough; + case SPI_MEM_NO_DATA: + err = f_ospi_indir_write(ospi, mem, op); + break; + + default: + dev_warn(ospi->dev, "Unsupported direction"); + err = -EOPNOTSUPP; + } + + return err; +} + +static bool f_ospi_supports_op_width(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + u8 width_available[] = { 0, 1, 2, 4, 8 }; + u8 width_op[] = { op->cmd.buswidth, op->addr.buswidth, + op->dummy.buswidth, op->data.buswidth }; + bool is_match_found; + int i, j; + + for (i = 0; i < ARRAY_SIZE(width_op); i++) { + is_match_found = false; + + for (j = 0; j < ARRAY_SIZE(width_available); j++) { + if (width_op[i] == width_available[j]) { + is_match_found = true; + break; + } + } + + if (!is_match_found) + return false; + } + + return true; +} + +static bool f_ospi_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + if (f_ospi_get_dummy_cycle(op) > OSPI_DUMMY_CYCLE_MAX) + return false; + + if (op->addr.nbytes > 4) + return false; + + if (!f_ospi_supports_op_width(mem, op)) + return false; + + return true; +} + +static int f_ospi_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) +{ + op->data.nbytes = min((int)op->data.nbytes, (int)(OSPI_DAT_SIZE_MAX)); + + return 0; +} + +static const struct spi_controller_mem_ops f_ospi_mem_ops = { + .adjust_op_size = f_ospi_adjust_op_size, + .supports_op = f_ospi_supports_op, + .exec_op = f_ospi_exec_op, +}; + +static int f_ospi_init(struct f_ospi *ospi) +{ + int ret; + + ret = f_ospi_prepare_config(ospi); + if (ret) + return ret; + + /* Disable boot signal */ + writel(OSPI_ACC_MODE_BOOT_DISABLE, ospi->base + OSPI_ACC_MODE); + + f_ospi_config_dll(ospi); + + /* Disable IRQ */ + f_ospi_clear_irq(ospi); + f_ospi_disable_irq_status(ospi, OSPI_IRQ_ALL); + f_ospi_disable_irq_output(ospi, OSPI_IRQ_ALL); + + return f_ospi_unprepare_config(ospi); +} + +static int f_ospi_probe(struct platform_device *pdev) +{ + struct spi_controller *ctlr; + struct device *dev = &pdev->dev; + struct f_ospi *ospi; + u32 num_cs = OSPI_NUM_CS; + int ret; + + ctlr = spi_alloc_master(dev, sizeof(*ospi)); + if (!ctlr) + return -ENOMEM; + + ctlr->mode_bits = SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL + | SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_OCTAL + | SPI_MODE_0 | SPI_MODE_1 | SPI_LSB_FIRST; + ctlr->mem_ops = &f_ospi_mem_ops; + ctlr->bus_num = -1; + of_property_read_u32(dev->of_node, "num-cs", &num_cs); + if (num_cs > OSPI_NUM_CS) { + dev_err(dev, "num-cs too large: %d\n", num_cs); + return -ENOMEM; + } + ctlr->num_chipselect = num_cs; + ctlr->dev.of_node = dev->of_node; + + ospi = spi_controller_get_devdata(ctlr); + ospi->dev = dev; + + platform_set_drvdata(pdev, ospi); + + ospi->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(ospi->base)) { + ret = PTR_ERR(ospi->base); + goto err_put_ctlr; + } + + ospi->clk = devm_clk_get(dev, NULL); + if (IS_ERR(ospi->clk)) { + ret = PTR_ERR(ospi->clk); + goto err_put_ctlr; + } + + ret = clk_prepare_enable(ospi->clk); + if (ret) { + dev_err(dev, "Failed to enable the clock\n"); + goto err_disable_clk; + } + + mutex_init(&ospi->mlock); + + ret = f_ospi_init(ospi); + if (ret) + goto err_destroy_mutex; + + ret = devm_spi_register_controller(dev, ctlr); + if (ret) + goto err_destroy_mutex; + + return 0; + +err_destroy_mutex: + mutex_destroy(&ospi->mlock); + +err_disable_clk: + clk_disable_unprepare(ospi->clk); + +err_put_ctlr: + spi_controller_put(ctlr); + + return ret; +} + +static int f_ospi_remove(struct platform_device *pdev) +{ + struct f_ospi *ospi = platform_get_drvdata(pdev); + + clk_disable_unprepare(ospi->clk); + + mutex_destroy(&ospi->mlock); + + return 0; +} + +static const struct of_device_id f_ospi_dt_ids[] = { + { .compatible = "socionext,f-ospi" }, + {} +}; +MODULE_DEVICE_TABLE(of, f_ospi_dt_ids); + +static struct platform_driver f_ospi_driver = { + .driver = { + .name = "socionext,f-ospi", + .of_match_table = f_ospi_dt_ids, + }, + .probe = f_ospi_probe, + .remove = f_ospi_remove, +}; +module_platform_driver(f_ospi_driver); + +MODULE_DESCRIPTION("Socionext F_OSPI controller driver"); +MODULE_AUTHOR("Socionext Inc."); +MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-wpcm-fiu.c b/drivers/spi/spi-wpcm-fiu.c new file mode 100644 index 000000000000..ab33710d50ac --- /dev/null +++ b/drivers/spi/spi-wpcm-fiu.c @@ -0,0 +1,508 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2022 Jonathan Neuschäfer + +#include <linux/clk.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/spi/spi-mem.h> + +#define FIU_CFG 0x00 +#define FIU_BURST_BFG 0x01 +#define FIU_RESP_CFG 0x02 +#define FIU_CFBB_PROT 0x03 +#define FIU_FWIN1_LOW 0x04 +#define FIU_FWIN1_HIGH 0x06 +#define FIU_FWIN2_LOW 0x08 +#define FIU_FWIN2_HIGH 0x0a +#define FIU_FWIN3_LOW 0x0c +#define FIU_FWIN3_HIGH 0x0e +#define FIU_PROT_LOCK 0x10 +#define FIU_PROT_CLEAR 0x11 +#define FIU_SPI_FL_CFG 0x14 +#define FIU_UMA_CODE 0x16 +#define FIU_UMA_AB0 0x17 +#define FIU_UMA_AB1 0x18 +#define FIU_UMA_AB2 0x19 +#define FIU_UMA_DB0 0x1a +#define FIU_UMA_DB1 0x1b +#define FIU_UMA_DB2 0x1c +#define FIU_UMA_DB3 0x1d +#define FIU_UMA_CTS 0x1e +#define FIU_UMA_ECTS 0x1f + +#define FIU_BURST_CFG_R16 3 + +#define FIU_UMA_CTS_D_SIZE(x) (x) +#define FIU_UMA_CTS_A_SIZE BIT(3) +#define FIU_UMA_CTS_WR BIT(4) +#define FIU_UMA_CTS_CS(x) ((x) << 5) +#define FIU_UMA_CTS_EXEC_DONE BIT(7) + +#define SHM_FLASH_SIZE 0x02 +#define SHM_FLASH_SIZE_STALL_HOST BIT(6) + +/* + * I observed a typical wait time of 16 iterations for a UMA transfer to + * finish, so this should be a safe limit. + */ +#define UMA_WAIT_ITERATIONS 100 + +/* The memory-mapped view of flash is 16 MiB long */ +#define MAX_MEMORY_SIZE_PER_CS (16 << 20) +#define MAX_MEMORY_SIZE_TOTAL (4 * MAX_MEMORY_SIZE_PER_CS) + +struct wpcm_fiu_spi { + struct device *dev; + struct clk *clk; + void __iomem *regs; + void __iomem *memory; + size_t memory_size; + struct regmap *shm_regmap; +}; + +static void wpcm_fiu_set_opcode(struct wpcm_fiu_spi *fiu, u8 opcode) +{ + writeb(opcode, fiu->regs + FIU_UMA_CODE); +} + +static void wpcm_fiu_set_addr(struct wpcm_fiu_spi *fiu, u32 addr) +{ + writeb((addr >> 0) & 0xff, fiu->regs + FIU_UMA_AB0); + writeb((addr >> 8) & 0xff, fiu->regs + FIU_UMA_AB1); + writeb((addr >> 16) & 0xff, fiu->regs + FIU_UMA_AB2); +} + +static void wpcm_fiu_set_data(struct wpcm_fiu_spi *fiu, const u8 *data, unsigned int nbytes) +{ + int i; + + for (i = 0; i < nbytes; i++) + writeb(data[i], fiu->regs + FIU_UMA_DB0 + i); +} + +static void wpcm_fiu_get_data(struct wpcm_fiu_spi *fiu, u8 *data, unsigned int nbytes) +{ + int i; + + for (i = 0; i < nbytes; i++) + data[i] = readb(fiu->regs + FIU_UMA_DB0 + i); +} + +/* + * Perform a UMA (User Mode Access) operation, i.e. a software-controlled SPI transfer. + */ +static int wpcm_fiu_do_uma(struct wpcm_fiu_spi *fiu, unsigned int cs, + bool use_addr, bool write, int data_bytes) +{ + int i = 0; + u8 cts = FIU_UMA_CTS_EXEC_DONE | FIU_UMA_CTS_CS(cs); + + if (use_addr) + cts |= FIU_UMA_CTS_A_SIZE; + if (write) + cts |= FIU_UMA_CTS_WR; + cts |= FIU_UMA_CTS_D_SIZE(data_bytes); + + writeb(cts, fiu->regs + FIU_UMA_CTS); + + for (i = 0; i < UMA_WAIT_ITERATIONS; i++) + if (!(readb(fiu->regs + FIU_UMA_CTS) & FIU_UMA_CTS_EXEC_DONE)) + return 0; + + dev_info(fiu->dev, "UMA transfer has not finished in %d iterations\n", UMA_WAIT_ITERATIONS); + return -EIO; +} + +static void wpcm_fiu_ects_assert(struct wpcm_fiu_spi *fiu, unsigned int cs) +{ + u8 ects = readb(fiu->regs + FIU_UMA_ECTS); + + ects &= ~BIT(cs); + writeb(ects, fiu->regs + FIU_UMA_ECTS); +} + +static void wpcm_fiu_ects_deassert(struct wpcm_fiu_spi *fiu, unsigned int cs) +{ + u8 ects = readb(fiu->regs + FIU_UMA_ECTS); + + ects |= BIT(cs); + writeb(ects, fiu->regs + FIU_UMA_ECTS); +} + +struct wpcm_fiu_op_shape { + bool (*match)(const struct spi_mem_op *op); + int (*exec)(struct spi_mem *mem, const struct spi_mem_op *op); +}; + +static bool wpcm_fiu_normal_match(const struct spi_mem_op *op) +{ + // Opcode 0x0b (FAST READ) is treated differently in hardware + if (op->cmd.opcode == 0x0b) + return false; + + return (op->addr.nbytes == 0 || op->addr.nbytes == 3) && + op->dummy.nbytes == 0 && op->data.nbytes <= 4; +} + +static int wpcm_fiu_normal_exec(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct wpcm_fiu_spi *fiu = spi_controller_get_devdata(mem->spi->controller); + int ret; + + wpcm_fiu_set_opcode(fiu, op->cmd.opcode); + wpcm_fiu_set_addr(fiu, op->addr.val); + if (op->data.dir == SPI_MEM_DATA_OUT) + wpcm_fiu_set_data(fiu, op->data.buf.out, op->data.nbytes); + + ret = wpcm_fiu_do_uma(fiu, mem->spi->chip_select, op->addr.nbytes == 3, + op->data.dir == SPI_MEM_DATA_OUT, op->data.nbytes); + + if (op->data.dir == SPI_MEM_DATA_IN) + wpcm_fiu_get_data(fiu, op->data.buf.in, op->data.nbytes); + + return ret; +} + +static bool wpcm_fiu_fast_read_match(const struct spi_mem_op *op) +{ + return op->cmd.opcode == 0x0b && op->addr.nbytes == 3 && + op->dummy.nbytes == 1 && + op->data.nbytes >= 1 && op->data.nbytes <= 4 && + op->data.dir == SPI_MEM_DATA_IN; +} + +static int wpcm_fiu_fast_read_exec(struct spi_mem *mem, const struct spi_mem_op *op) +{ + return -EINVAL; +} + +/* + * 4-byte addressing. + * + * Flash view: [ C A A A A D D D D] + * bytes: 13 aa bb cc dd -> 5a a5 f0 0f + * FIU's view: [ C A A A][ C D D D D] + * FIU mode: [ read/write][ read ] + */ +static bool wpcm_fiu_4ba_match(const struct spi_mem_op *op) +{ + return op->addr.nbytes == 4 && op->dummy.nbytes == 0 && op->data.nbytes <= 4; +} + +static int wpcm_fiu_4ba_exec(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct wpcm_fiu_spi *fiu = spi_controller_get_devdata(mem->spi->controller); + int cs = mem->spi->chip_select; + + wpcm_fiu_ects_assert(fiu, cs); + + wpcm_fiu_set_opcode(fiu, op->cmd.opcode); + wpcm_fiu_set_addr(fiu, op->addr.val >> 8); + wpcm_fiu_do_uma(fiu, cs, true, false, 0); + + wpcm_fiu_set_opcode(fiu, op->addr.val & 0xff); + wpcm_fiu_set_addr(fiu, 0); + if (op->data.dir == SPI_MEM_DATA_OUT) + wpcm_fiu_set_data(fiu, op->data.buf.out, op->data.nbytes); + wpcm_fiu_do_uma(fiu, cs, false, op->data.dir == SPI_MEM_DATA_OUT, op->data.nbytes); + + wpcm_fiu_ects_deassert(fiu, cs); + + if (op->data.dir == SPI_MEM_DATA_IN) + wpcm_fiu_get_data(fiu, op->data.buf.in, op->data.nbytes); + + return 0; +} + +/* + * RDID (Read Identification) needs special handling because Linux expects to + * be able to read 6 ID bytes and FIU can only read up to 4 at once. + * + * We're lucky in this case, because executing the RDID instruction twice will + * result in the same result. + * + * What we do is as follows (C: write command/opcode byte, D: read data byte, + * A: write address byte): + * + * 1. C D D D + * 2. C A A A D D D + */ +static bool wpcm_fiu_rdid_match(const struct spi_mem_op *op) +{ + return op->cmd.opcode == 0x9f && op->addr.nbytes == 0 && + op->dummy.nbytes == 0 && op->data.nbytes == 6 && + op->data.dir == SPI_MEM_DATA_IN; +} + +static int wpcm_fiu_rdid_exec(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct wpcm_fiu_spi *fiu = spi_controller_get_devdata(mem->spi->controller); + int cs = mem->spi->chip_select; + + /* First transfer */ + wpcm_fiu_set_opcode(fiu, op->cmd.opcode); + wpcm_fiu_set_addr(fiu, 0); + wpcm_fiu_do_uma(fiu, cs, false, false, 3); + wpcm_fiu_get_data(fiu, op->data.buf.in, 3); + + /* Second transfer */ + wpcm_fiu_set_opcode(fiu, op->cmd.opcode); + wpcm_fiu_set_addr(fiu, 0); + wpcm_fiu_do_uma(fiu, cs, true, false, 3); + wpcm_fiu_get_data(fiu, op->data.buf.in + 3, 3); + + return 0; +} + +/* + * With some dummy bytes. + * + * C A A A X* X D D D D + * [C A A A D*][C D D D D] + */ +static bool wpcm_fiu_dummy_match(const struct spi_mem_op *op) +{ + // Opcode 0x0b (FAST READ) is treated differently in hardware + if (op->cmd.opcode == 0x0b) + return false; + + return (op->addr.nbytes == 0 || op->addr.nbytes == 3) && + op->dummy.nbytes >= 1 && op->dummy.nbytes <= 5 && + op->data.nbytes <= 4; +} + +static int wpcm_fiu_dummy_exec(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct wpcm_fiu_spi *fiu = spi_controller_get_devdata(mem->spi->controller); + int cs = mem->spi->chip_select; + + wpcm_fiu_ects_assert(fiu, cs); + + /* First transfer */ + wpcm_fiu_set_opcode(fiu, op->cmd.opcode); + wpcm_fiu_set_addr(fiu, op->addr.val); + wpcm_fiu_do_uma(fiu, cs, op->addr.nbytes != 0, true, op->dummy.nbytes - 1); + + /* Second transfer */ + wpcm_fiu_set_opcode(fiu, 0); + wpcm_fiu_set_addr(fiu, 0); + wpcm_fiu_do_uma(fiu, cs, false, false, op->data.nbytes); + wpcm_fiu_get_data(fiu, op->data.buf.in, op->data.nbytes); + + wpcm_fiu_ects_deassert(fiu, cs); + + return 0; +} + +static const struct wpcm_fiu_op_shape wpcm_fiu_op_shapes[] = { + { .match = wpcm_fiu_normal_match, .exec = wpcm_fiu_normal_exec }, + { .match = wpcm_fiu_fast_read_match, .exec = wpcm_fiu_fast_read_exec }, + { .match = wpcm_fiu_4ba_match, .exec = wpcm_fiu_4ba_exec }, + { .match = wpcm_fiu_rdid_match, .exec = wpcm_fiu_rdid_exec }, + { .match = wpcm_fiu_dummy_match, .exec = wpcm_fiu_dummy_exec }, +}; + +static const struct wpcm_fiu_op_shape *wpcm_fiu_find_op_shape(const struct spi_mem_op *op) +{ + size_t i; + + for (i = 0; i < ARRAY_SIZE(wpcm_fiu_op_shapes); i++) { + const struct wpcm_fiu_op_shape *shape = &wpcm_fiu_op_shapes[i]; + + if (shape->match(op)) + return shape; + } + + return NULL; +} + +static bool wpcm_fiu_supports_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + if (!spi_mem_default_supports_op(mem, op)) + return false; + + if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr) + return false; + + if (op->cmd.buswidth > 1 || op->addr.buswidth > 1 || + op->dummy.buswidth > 1 || op->data.buswidth > 1) + return false; + + return wpcm_fiu_find_op_shape(op) != NULL; +} + +/* + * In order to ensure the integrity of SPI transfers performed via UMA, + * temporarily disable (stall) memory accesses coming from the host CPU. + */ +static void wpcm_fiu_stall_host(struct wpcm_fiu_spi *fiu, bool stall) +{ + if (fiu->shm_regmap) { + int res = regmap_update_bits(fiu->shm_regmap, SHM_FLASH_SIZE, + SHM_FLASH_SIZE_STALL_HOST, + stall ? SHM_FLASH_SIZE_STALL_HOST : 0); + if (res) + dev_warn(fiu->dev, "Failed to (un)stall host memory accesses: %d\n", res); + } +} + +static int wpcm_fiu_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct wpcm_fiu_spi *fiu = spi_controller_get_devdata(mem->spi->controller); + const struct wpcm_fiu_op_shape *shape = wpcm_fiu_find_op_shape(op); + + wpcm_fiu_stall_host(fiu, true); + + if (shape) + return shape->exec(mem, op); + + wpcm_fiu_stall_host(fiu, false); + + return -ENOTSUPP; +} + +static int wpcm_fiu_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) +{ + if (op->data.nbytes > 4) + op->data.nbytes = 4; + + return 0; +} + +static int wpcm_fiu_dirmap_create(struct spi_mem_dirmap_desc *desc) +{ + struct wpcm_fiu_spi *fiu = spi_controller_get_devdata(desc->mem->spi->controller); + int cs = desc->mem->spi->chip_select; + + if (desc->info.op_tmpl.data.dir != SPI_MEM_DATA_IN) + return -ENOTSUPP; + + /* + * Unfortunately, FIU only supports a 16 MiB direct mapping window (per + * attached flash chip), but the SPI MEM core doesn't support partial + * direct mappings. This means that we can't support direct mapping on + * flashes that are bigger than 16 MiB. + */ + if (desc->info.offset + desc->info.length > MAX_MEMORY_SIZE_PER_CS) + return -ENOTSUPP; + + /* Don't read past the memory window */ + if (cs * MAX_MEMORY_SIZE_PER_CS + desc->info.offset + desc->info.length > fiu->memory_size) + return -ENOTSUPP; + + return 0; +} + +static ssize_t wpcm_fiu_direct_read(struct spi_mem_dirmap_desc *desc, u64 offs, size_t len, void *buf) +{ + struct wpcm_fiu_spi *fiu = spi_controller_get_devdata(desc->mem->spi->controller); + int cs = desc->mem->spi->chip_select; + + if (offs >= MAX_MEMORY_SIZE_PER_CS) + return -ENOTSUPP; + + offs += cs * MAX_MEMORY_SIZE_PER_CS; + + if (!fiu->memory || offs >= fiu->memory_size) + return -ENOTSUPP; + + len = min_t(size_t, len, fiu->memory_size - offs); + memcpy_fromio(buf, fiu->memory + offs, len); + + return len; +} + +static const struct spi_controller_mem_ops wpcm_fiu_mem_ops = { + .adjust_op_size = wpcm_fiu_adjust_op_size, + .supports_op = wpcm_fiu_supports_op, + .exec_op = wpcm_fiu_exec_op, + .dirmap_create = wpcm_fiu_dirmap_create, + .dirmap_read = wpcm_fiu_direct_read, +}; + +static void wpcm_fiu_hw_init(struct wpcm_fiu_spi *fiu) +{ + /* Configure memory-mapped flash access */ + writeb(FIU_BURST_CFG_R16, fiu->regs + FIU_BURST_BFG); + writeb(MAX_MEMORY_SIZE_TOTAL / (512 << 10), fiu->regs + FIU_CFG); + writeb(MAX_MEMORY_SIZE_PER_CS / (512 << 10) | BIT(6), fiu->regs + FIU_SPI_FL_CFG); + + /* Deassert all manually asserted chip selects */ + writeb(0x0f, fiu->regs + FIU_UMA_ECTS); +} + +static int wpcm_fiu_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct spi_controller *ctrl; + struct wpcm_fiu_spi *fiu; + struct resource *res; + + ctrl = devm_spi_alloc_master(dev, sizeof(*fiu)); + if (!ctrl) + return -ENOMEM; + + fiu = spi_controller_get_devdata(ctrl); + fiu->dev = dev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "control"); + fiu->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(fiu->regs)) { + dev_err(dev, "Failed to map registers\n"); + return PTR_ERR(fiu->regs); + } + + fiu->clk = devm_clk_get_enabled(dev, NULL); + if (IS_ERR(fiu->clk)) + return PTR_ERR(fiu->clk); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "memory"); + fiu->memory = devm_ioremap_resource(dev, res); + fiu->memory_size = min_t(size_t, resource_size(res), MAX_MEMORY_SIZE_TOTAL); + if (IS_ERR(fiu->memory)) { + dev_err(dev, "Failed to map flash memory window\n"); + return PTR_ERR(fiu->memory); + } + + fiu->shm_regmap = syscon_regmap_lookup_by_phandle_optional(dev->of_node, "nuvoton,shm"); + + wpcm_fiu_hw_init(fiu); + + ctrl->bus_num = -1; + ctrl->mem_ops = &wpcm_fiu_mem_ops; + ctrl->num_chipselect = 4; + ctrl->dev.of_node = dev->of_node; + + /* + * The FIU doesn't include a clock divider, the clock is entirely + * determined by the AHB3 bus clock. + */ + ctrl->min_speed_hz = clk_get_rate(fiu->clk); + ctrl->max_speed_hz = clk_get_rate(fiu->clk); + + return devm_spi_register_controller(dev, ctrl); +} + +static const struct of_device_id wpcm_fiu_dt_ids[] = { + { .compatible = "nuvoton,wpcm450-fiu", }, + { } +}; +MODULE_DEVICE_TABLE(of, wpcm_fiu_dt_ids); + +static struct platform_driver wpcm_fiu_driver = { + .driver = { + .name = "wpcm450-fiu", + .bus = &platform_bus_type, + .of_match_table = wpcm_fiu_dt_ids, + }, + .probe = wpcm_fiu_probe, +}; +module_platform_driver(wpcm_fiu_driver); + +MODULE_DESCRIPTION("Nuvoton WPCM450 FIU SPI controller driver"); +MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-xcomm.c b/drivers/spi/spi-xcomm.c index 1d9b3f03d986..8628241ec99e 100644 --- a/drivers/spi/spi-xcomm.c +++ b/drivers/spi/spi-xcomm.c @@ -202,8 +202,7 @@ static int spi_xcomm_transfer_one(struct spi_master *master, return status; } -static int spi_xcomm_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) +static int spi_xcomm_probe(struct i2c_client *i2c) { struct spi_xcomm *spi_xcomm; struct spi_master *master; @@ -242,7 +241,7 @@ static struct i2c_driver spi_xcomm_driver = { .name = "spi-xcomm", }, .id_table = spi_xcomm_ids, - .probe = spi_xcomm_probe, + .probe_new = spi_xcomm_probe, }; module_i2c_driver(spi_xcomm_driver); diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c index c760aac070e5..95ff15665d44 100644 --- a/drivers/spi/spi-zynqmp-gqspi.c +++ b/drivers/spi/spi-zynqmp-gqspi.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/of_irq.h> #include <linux/of_address.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/spi/spi.h> @@ -34,6 +35,7 @@ #define GQSPI_RXD_OFST 0x00000120 #define GQSPI_TX_THRESHOLD_OFST 0x00000128 #define GQSPI_RX_THRESHOLD_OFST 0x0000012C +#define IOU_TAPDLY_BYPASS_OFST 0x0000003C #define GQSPI_LPBK_DLY_ADJ_OFST 0x00000138 #define GQSPI_GEN_FIFO_OFST 0x00000140 #define GQSPI_SEL_OFST 0x00000144 @@ -48,6 +50,7 @@ #define GQSPI_QSPIDMA_DST_I_MASK_OFST 0x00000820 #define GQSPI_QSPIDMA_DST_ADDR_OFST 0x00000800 #define GQSPI_QSPIDMA_DST_ADDR_MSB_OFST 0x00000828 +#define GQSPI_DATA_DLY_ADJ_OFST 0x000001F8 /* GQSPI register bit masks */ #define GQSPI_SEL_MASK 0x00000001 @@ -136,11 +139,37 @@ #define GQSPI_MAX_NUM_CS 2 /* Maximum number of chip selects */ +#define GQSPI_USE_DATA_DLY 0x1 +#define GQSPI_USE_DATA_DLY_SHIFT 31 +#define GQSPI_DATA_DLY_ADJ_VALUE 0x2 +#define GQSPI_DATA_DLY_ADJ_SHIFT 28 +#define GQSPI_LPBK_DLY_ADJ_DLY_1 0x1 +#define GQSPI_LPBK_DLY_ADJ_DLY_1_SHIFT 0x3 +#define TAP_DLY_BYPASS_LQSPI_RX_VALUE 0x1 +#define TAP_DLY_BYPASS_LQSPI_RX_SHIFT 0x2 + +/* set to differentiate versal from zynqmp, 1=versal, 0=zynqmp */ +#define QSPI_QUIRK_HAS_TAPDELAY BIT(0) + +#define GQSPI_FREQ_37_5MHZ 37500000 +#define GQSPI_FREQ_40MHZ 40000000 +#define GQSPI_FREQ_100MHZ 100000000 +#define GQSPI_FREQ_150MHZ 150000000 + #define SPI_AUTOSUSPEND_TIMEOUT 3000 enum mode_type {GQSPI_MODE_IO, GQSPI_MODE_DMA}; /** + * struct qspi_platform_data - zynqmp qspi platform data structure + * @quirks: Flags is used to identify the platform + */ +struct qspi_platform_data { + u32 quirks; +}; + +/** * struct zynqmp_qspi - Defines qspi driver instance + * @ctlr: Pointer to the spi controller information * @regs: Virtual address of the QSPI controller registers * @refclk: Pointer to the peripheral clock * @pclk: Pointer to the APB clock @@ -157,6 +186,9 @@ enum mode_type {GQSPI_MODE_IO, GQSPI_MODE_DMA}; * @genfifoentry: Used for storing the genfifoentry instruction. * @mode: Defines the mode in which QSPI is operating * @data_completion: completion structure + * @op_lock: Operational lock + * @speed_hz: Current SPI bus clock speed in hz + * @has_tapdelay: Used for tapdelay register available in qspi */ struct zynqmp_qspi { struct spi_controller *ctlr; @@ -177,6 +209,8 @@ struct zynqmp_qspi { enum mode_type mode; struct completion data_completion; struct mutex op_lock; + u32 speed_hz; + bool has_tapdelay; }; /** @@ -250,6 +284,56 @@ static void zynqmp_gqspi_selectslave(struct zynqmp_qspi *instanceptr, } /** + * zynqmp_qspi_set_tapdelay: To configure qspi tap delays + * @xqspi: Pointer to the zynqmp_qspi structure + * @baudrateval: Buadrate to configure + */ +static void zynqmp_qspi_set_tapdelay(struct zynqmp_qspi *xqspi, u32 baudrateval) +{ + u32 tapdlybypass = 0, lpbkdlyadj = 0, datadlyadj = 0, clk_rate; + u32 reqhz = 0; + + clk_rate = clk_get_rate(xqspi->refclk); + reqhz = (clk_rate / (GQSPI_BAUD_DIV_SHIFT << baudrateval)); + + if (!xqspi->has_tapdelay) { + if (reqhz <= GQSPI_FREQ_40MHZ) { + zynqmp_pm_set_tapdelay_bypass(PM_TAPDELAY_QSPI, + PM_TAPDELAY_BYPASS_ENABLE); + } else if (reqhz <= GQSPI_FREQ_100MHZ) { + zynqmp_pm_set_tapdelay_bypass(PM_TAPDELAY_QSPI, + PM_TAPDELAY_BYPASS_ENABLE); + lpbkdlyadj |= (GQSPI_LPBK_DLY_ADJ_USE_LPBK_MASK); + datadlyadj |= ((GQSPI_USE_DATA_DLY << + GQSPI_USE_DATA_DLY_SHIFT) + | (GQSPI_DATA_DLY_ADJ_VALUE << + GQSPI_DATA_DLY_ADJ_SHIFT)); + } else if (reqhz <= GQSPI_FREQ_150MHZ) { + lpbkdlyadj |= GQSPI_LPBK_DLY_ADJ_USE_LPBK_MASK; + } + } else { + if (reqhz <= GQSPI_FREQ_37_5MHZ) { + tapdlybypass |= (TAP_DLY_BYPASS_LQSPI_RX_VALUE << + TAP_DLY_BYPASS_LQSPI_RX_SHIFT); + } else if (reqhz <= GQSPI_FREQ_100MHZ) { + tapdlybypass |= (TAP_DLY_BYPASS_LQSPI_RX_VALUE << + TAP_DLY_BYPASS_LQSPI_RX_SHIFT); + lpbkdlyadj |= (GQSPI_LPBK_DLY_ADJ_USE_LPBK_MASK); + datadlyadj |= (GQSPI_USE_DATA_DLY << + GQSPI_USE_DATA_DLY_SHIFT); + } else if (reqhz <= GQSPI_FREQ_150MHZ) { + lpbkdlyadj |= (GQSPI_LPBK_DLY_ADJ_USE_LPBK_MASK + | (GQSPI_LPBK_DLY_ADJ_DLY_1 << + GQSPI_LPBK_DLY_ADJ_DLY_1_SHIFT)); + } + zynqmp_gqspi_write(xqspi, + IOU_TAPDLY_BYPASS_OFST, tapdlybypass); + } + zynqmp_gqspi_write(xqspi, GQSPI_LPBK_DLY_ADJ_OFST, lpbkdlyadj); + zynqmp_gqspi_write(xqspi, GQSPI_DATA_DLY_ADJ_OFST, datadlyadj); +} + +/** * zynqmp_qspi_init_hw - Initialize the hardware * @xqspi: Pointer to the zynqmp_qspi structure * @@ -264,12 +348,15 @@ static void zynqmp_gqspi_selectslave(struct zynqmp_qspi *instanceptr, * - Enable manual slave select * - Enable manual start * - Deselect all the chip select lines - * - Set the little endian mode of TX FIFO and + * - Set the little endian mode of TX FIFO + * - Set clock phase + * - Set clock polarity and * - Enable the QSPI controller */ static void zynqmp_qspi_init_hw(struct zynqmp_qspi *xqspi) { - u32 config_reg; + u32 config_reg, baud_rate_val = 0; + ulong clk_rate; /* Select the GQSPI mode */ zynqmp_gqspi_write(xqspi, GQSPI_SEL_OFST, GQSPI_SEL_MASK); @@ -303,21 +390,37 @@ static void zynqmp_qspi_init_hw(struct zynqmp_qspi *xqspi) config_reg |= GQSPI_CFG_WP_HOLD_MASK; /* Clear pre-scalar by default */ config_reg &= ~GQSPI_CFG_BAUD_RATE_DIV_MASK; - /* CPHA 0 */ - config_reg &= ~GQSPI_CFG_CLK_PHA_MASK; - /* CPOL 0 */ - config_reg &= ~GQSPI_CFG_CLK_POL_MASK; + /* Set CPHA */ + if (xqspi->ctlr->mode_bits & SPI_CPHA) + config_reg |= GQSPI_CFG_CLK_PHA_MASK; + else + config_reg &= ~GQSPI_CFG_CLK_PHA_MASK; + /* Set CPOL */ + if (xqspi->ctlr->mode_bits & SPI_CPOL) + config_reg |= GQSPI_CFG_CLK_POL_MASK; + else + config_reg &= ~GQSPI_CFG_CLK_POL_MASK; + + /* Set the clock frequency */ + clk_rate = clk_get_rate(xqspi->refclk); + while ((baud_rate_val < GQSPI_BAUD_DIV_MAX) && + (clk_rate / + (GQSPI_BAUD_DIV_SHIFT << baud_rate_val)) > xqspi->speed_hz) + baud_rate_val++; + + config_reg &= ~GQSPI_CFG_BAUD_RATE_DIV_MASK; + config_reg |= (baud_rate_val << GQSPI_CFG_BAUD_RATE_DIV_SHIFT); + zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg); + /* Set the tapdelay for clock frequency */ + zynqmp_qspi_set_tapdelay(xqspi, baud_rate_val); + /* Clear the TX and RX FIFO */ zynqmp_gqspi_write(xqspi, GQSPI_FIFO_CTRL_OFST, GQSPI_FIFO_CTRL_RST_RX_FIFO_MASK | GQSPI_FIFO_CTRL_RST_TX_FIFO_MASK | GQSPI_FIFO_CTRL_RST_GEN_FIFO_MASK); - /* Set by default to allow for high frequencies */ - zynqmp_gqspi_write(xqspi, GQSPI_LPBK_DLY_ADJ_OFST, - zynqmp_gqspi_read(xqspi, GQSPI_LPBK_DLY_ADJ_OFST) | - GQSPI_LPBK_DLY_ADJ_USE_LPBK_MASK); /* Reset thresholds */ zynqmp_gqspi_write(xqspi, GQSPI_TX_THRESHOLD_OFST, GQSPI_TX_FIFO_THRESHOLD_RESET_VAL); @@ -455,30 +558,30 @@ static int zynqmp_qspi_config_op(struct zynqmp_qspi *xqspi, struct spi_device *qspi) { ulong clk_rate; - u32 config_reg, baud_rate_val = 0; + u32 config_reg, req_speed_hz, baud_rate_val = 0; - /* Set the clock frequency */ - /* If req_hz == 0, default to lowest speed */ - clk_rate = clk_get_rate(xqspi->refclk); + req_speed_hz = qspi->max_speed_hz; - while ((baud_rate_val < GQSPI_BAUD_DIV_MAX) && - (clk_rate / - (GQSPI_BAUD_DIV_SHIFT << baud_rate_val)) > qspi->max_speed_hz) - baud_rate_val++; + if (xqspi->speed_hz != req_speed_hz) { + xqspi->speed_hz = req_speed_hz; - config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST); + /* Set the clock frequency */ + /* If req_speed_hz == 0, default to lowest speed */ + clk_rate = clk_get_rate(xqspi->refclk); - /* Set the QSPI clock phase and clock polarity */ - config_reg &= (~GQSPI_CFG_CLK_PHA_MASK) & (~GQSPI_CFG_CLK_POL_MASK); + while ((baud_rate_val < GQSPI_BAUD_DIV_MAX) && + (clk_rate / + (GQSPI_BAUD_DIV_SHIFT << baud_rate_val)) > + req_speed_hz) + baud_rate_val++; - if (qspi->mode & SPI_CPHA) - config_reg |= GQSPI_CFG_CLK_PHA_MASK; - if (qspi->mode & SPI_CPOL) - config_reg |= GQSPI_CFG_CLK_POL_MASK; + config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST); - config_reg &= ~GQSPI_CFG_BAUD_RATE_DIV_MASK; - config_reg |= (baud_rate_val << GQSPI_CFG_BAUD_RATE_DIV_SHIFT); - zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg); + config_reg &= ~GQSPI_CFG_BAUD_RATE_DIV_MASK; + config_reg |= (baud_rate_val << GQSPI_CFG_BAUD_RATE_DIV_SHIFT); + zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg); + zynqmp_qspi_set_tapdelay(xqspi, baud_rate_val); + } return 0; } @@ -739,6 +842,8 @@ static irqreturn_t zynqmp_qspi_irq(int irq, void *dev_id) /** * zynqmp_qspi_setuprxdma - This function sets up the RX DMA operation * @xqspi: xqspi is a pointer to the GQSPI instance. + * + * Return: 0 on success; error value otherwise. */ static int zynqmp_qspi_setuprxdma(struct zynqmp_qspi *xqspi) { @@ -823,6 +928,8 @@ static void zynqmp_qspi_write_op(struct zynqmp_qspi *xqspi, u8 tx_nbits, * @rx_nbits: Receive buswidth. * @genfifoentry: genfifoentry is pointer to the variable in which * GENFIFO mask is returned to calling function + * + * Return: 0 on success; error value otherwise. */ static int zynqmp_qspi_read_op(struct zynqmp_qspi *xqspi, u8 rx_nbits, u32 genfifoentry) @@ -1087,6 +1194,16 @@ static const struct dev_pm_ops zynqmp_qspi_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(zynqmp_qspi_suspend, zynqmp_qspi_resume) }; +static const struct qspi_platform_data versal_qspi_def = { + .quirks = QSPI_QUIRK_HAS_TAPDELAY, +}; + +static const struct of_device_id zynqmp_qspi_of_match[] = { + { .compatible = "xlnx,zynqmp-qspi-1.0"}, + { .compatible = "xlnx,versal-qspi-1.0", .data = &versal_qspi_def }, + { /* End of table */ } +}; + static const struct spi_controller_mem_ops zynqmp_qspi_mem_ops = { .exec_op = zynqmp_qspi_exec_op, }; @@ -1107,6 +1224,7 @@ static int zynqmp_qspi_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; u32 num_cs; + const struct qspi_platform_data *p_data; ctlr = spi_alloc_master(&pdev->dev, sizeof(*xqspi)); if (!ctlr) @@ -1117,6 +1235,10 @@ static int zynqmp_qspi_probe(struct platform_device *pdev) xqspi->ctlr = ctlr; platform_set_drvdata(pdev, xqspi); + p_data = of_device_get_match_data(&pdev->dev); + if (p_data && (p_data->quirks & QSPI_QUIRK_HAS_TAPDELAY)) + xqspi->has_tapdelay = true; + xqspi->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(xqspi->regs)) { ret = PTR_ERR(xqspi->regs); @@ -1164,6 +1286,11 @@ static int zynqmp_qspi_probe(struct platform_device *pdev) goto clk_dis_all; } + ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD | + SPI_TX_DUAL | SPI_TX_QUAD; + ctlr->max_speed_hz = clk_get_rate(xqspi->refclk) / 2; + xqspi->speed_hz = ctlr->max_speed_hz; + /* QSPI controller initializations */ zynqmp_qspi_init_hw(xqspi); @@ -1199,10 +1326,7 @@ static int zynqmp_qspi_probe(struct platform_device *pdev) ctlr->bits_per_word_mask = SPI_BPW_MASK(8); ctlr->mem_ops = &zynqmp_qspi_mem_ops; ctlr->setup = zynqmp_qspi_setup_op; - ctlr->max_speed_hz = clk_get_rate(xqspi->refclk) / 2; ctlr->bits_per_word_mask = SPI_BPW_MASK(8); - ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD | - SPI_TX_DUAL | SPI_TX_QUAD; ctlr->dev.of_node = np; ctlr->auto_runtime_pm = true; @@ -1253,11 +1377,6 @@ static int zynqmp_qspi_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id zynqmp_qspi_of_match[] = { - { .compatible = "xlnx,zynqmp-qspi-1.0", }, - { /* End of table */ } -}; - MODULE_DEVICE_TABLE(of, zynqmp_qspi_of_match); static struct platform_driver zynqmp_qspi_driver = { diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 5f9aedd1f0b6..3cc7bb4d03de 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -127,10 +127,10 @@ do { \ unsigned int start; \ pcpu_stats = per_cpu_ptr(in, i); \ do { \ - start = u64_stats_fetch_begin_irq( \ + start = u64_stats_fetch_begin( \ &pcpu_stats->syncp); \ inc = u64_stats_read(&pcpu_stats->field); \ - } while (u64_stats_fetch_retry_irq( \ + } while (u64_stats_fetch_retry( \ &pcpu_stats->syncp, start)); \ ret += inc; \ } \ @@ -360,6 +360,18 @@ const struct spi_device_id *spi_get_device_id(const struct spi_device *sdev) } EXPORT_SYMBOL_GPL(spi_get_device_id); +const void *spi_get_device_match_data(const struct spi_device *sdev) +{ + const void *match; + + match = device_get_match_data(&sdev->dev); + if (match) + return match; + + return (const void *)spi_get_device_id(sdev)->driver_data; +} +EXPORT_SYMBOL_GPL(spi_get_device_match_data); + static int spi_match_device(struct device *dev, struct device_driver *drv) { const struct spi_device *spi = to_spi_device(dev); @@ -2212,6 +2224,7 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, struct device_node *nc) { u32 value; + u16 cs_setup; int rc; /* Mode (clock phase/polarity/etc.) */ @@ -2297,6 +2310,11 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, if (!of_property_read_u32(nc, "spi-max-frequency", &value)) spi->max_speed_hz = value; + if (!of_property_read_u16(nc, "spi-cs-setup-ns", &cs_setup)) { + spi->cs_setup.value = cs_setup; + spi->cs_setup.unit = SPI_DELAY_UNIT_NSECS; + } + return 0; } @@ -2759,6 +2777,17 @@ int spi_slave_abort(struct spi_device *spi) } EXPORT_SYMBOL_GPL(spi_slave_abort); +int spi_target_abort(struct spi_device *spi) +{ + struct spi_controller *ctlr = spi->controller; + + if (spi_controller_is_target(ctlr) && ctlr->target_abort) + return ctlr->target_abort(ctlr); + + return -ENOTSUPP; +} +EXPORT_SYMBOL_GPL(spi_target_abort); + static ssize_t slave_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -3593,6 +3622,37 @@ static int __spi_validate_bits_per_word(struct spi_controller *ctlr, } /** + * spi_set_cs_timing - configure CS setup, hold, and inactive delays + * @spi: the device that requires specific CS timing configuration + * + * Return: zero on success, else a negative error code. + */ +static int spi_set_cs_timing(struct spi_device *spi) +{ + struct device *parent = spi->controller->dev.parent; + int status = 0; + + if (spi->controller->set_cs_timing && !spi->cs_gpiod) { + if (spi->controller->auto_runtime_pm) { + status = pm_runtime_get_sync(parent); + if (status < 0) { + pm_runtime_put_noidle(parent); + dev_err(&spi->controller->dev, "Failed to power device: %d\n", + status); + return status; + } + + status = spi->controller->set_cs_timing(spi); + pm_runtime_mark_last_busy(parent); + pm_runtime_put_autosuspend(parent); + } else { + status = spi->controller->set_cs_timing(spi); + } + } + return status; +} + +/** * spi_setup - setup SPI mode and clock rate * @spi: the device whose settings are being modified * Context: can sleep, and no requests are queued to the device @@ -3688,6 +3748,12 @@ int spi_setup(struct spi_device *spi) } } + status = spi_set_cs_timing(spi); + if (status) { + mutex_unlock(&spi->controller->io_mutex); + return status; + } + if (spi->controller->auto_runtime_pm && spi->controller->set_cs) { status = pm_runtime_resume_and_get(spi->controller->dev.parent); if (status < 0) { diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index b2775d82d2d7..6313e7d0cdf8 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -377,12 +377,23 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) switch (cmd) { /* read requests */ case SPI_IOC_RD_MODE: - retval = put_user(spi->mode & SPI_MODE_MASK, - (__u8 __user *)arg); - break; case SPI_IOC_RD_MODE32: - retval = put_user(spi->mode & SPI_MODE_MASK, - (__u32 __user *)arg); + tmp = spi->mode; + + { + struct spi_controller *ctlr = spi->controller; + + if (ctlr->use_gpio_descriptors && ctlr->cs_gpiods && + ctlr->cs_gpiods[spi->chip_select]) + tmp &= ~SPI_CS_HIGH; + } + + if (cmd == SPI_IOC_RD_MODE) + retval = put_user(tmp & SPI_MODE_MASK, + (__u8 __user *)arg); + else + retval = put_user(tmp & SPI_MODE_MASK, + (__u32 __user *)arg); break; case SPI_IOC_RD_LSB_FIRST: retval = put_user((spi->mode & SPI_LSB_FIRST) ? 1 : 0, diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 76d2b3ebad84..fac37680ffe7 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -135,6 +135,7 @@ enum pm_ret_status { }; enum pm_ioctl_id { + IOCTL_SET_TAPDELAY_BYPASS = 4, IOCTL_SD_DLL_RESET = 6, IOCTL_SET_SD_TAPDELAY = 7, IOCTL_SET_PLL_FRAC_MODE = 8, @@ -389,6 +390,18 @@ enum zynqmp_pm_shutdown_subtype { ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM = 2, }; +enum tap_delay_signal_type { + PM_TAPDELAY_NAND_DQS_IN = 0, + PM_TAPDELAY_NAND_DQS_OUT = 1, + PM_TAPDELAY_QSPI = 2, + PM_TAPDELAY_MAX = 3, +}; + +enum tap_delay_bypass_ctrl { + PM_TAPDELAY_BYPASS_DISABLE = 0, + PM_TAPDELAY_BYPASS_ENABLE = 1, +}; + enum ospi_mux_select_type { PM_OSPI_MUX_SEL_DMA = 0, PM_OSPI_MUX_SEL_LINEAR = 1, @@ -484,6 +497,7 @@ int zynqmp_pm_write_ggs(u32 index, u32 value); int zynqmp_pm_read_ggs(u32 index, u32 *value); int zynqmp_pm_write_pggs(u32 index, u32 value); int zynqmp_pm_read_pggs(u32 index, u32 *value); +int zynqmp_pm_set_tapdelay_bypass(u32 index, u32 value); int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype); int zynqmp_pm_set_boot_health_status(u32 value); int zynqmp_pm_pinctrl_request(const u32 pin); @@ -696,6 +710,11 @@ static inline int zynqmp_pm_read_pggs(u32 index, u32 *value) return -ENODEV; } +static inline int zynqmp_pm_set_tapdelay_bypass(u32 index, u32 value) +{ + return -ENODEV; +} + static inline int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype) { return -ENODEV; diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index a3fec2de512f..cd1973e6ac4b 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -229,6 +229,7 @@ enum pxa_ssp_type { LPSS_SPT_SSP, LPSS_BXT_SSP, LPSS_CNL_SSP, + SSP_MAX }; struct ssp_device { diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index fbf8c0d95968..9a32495fbb1f 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -356,6 +356,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * @max_speed_hz: Highest supported transfer speed * @flags: other constraints relevant to this driver * @slave: indicates that this is an SPI slave controller + * @target: indicates that this is an SPI target controller * @devm_allocated: whether the allocation of this struct is devres-managed * @max_transfer_size: function that returns the max transfer size for * a &spi_device; may be %NULL, so the default %SIZE_MAX will be used. @@ -440,6 +441,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * @mem_caps: controller capabilities for the handling of memory operations. * @unprepare_message: undo any work done by prepare_message(). * @slave_abort: abort the ongoing transfer request on an SPI slave controller + * @target_abort: abort the ongoing transfer request on an SPI target controller * @cs_gpiods: Array of GPIO descs to use as chip select lines; one per CS * number. Any individual value may be NULL for CS lines that * are not GPIOs (driven by the SPI controller itself). @@ -535,8 +537,12 @@ struct spi_controller { /* Flag indicating if the allocation of this struct is devres-managed */ bool devm_allocated; - /* Flag indicating this is an SPI slave controller */ - bool slave; + union { + /* Flag indicating this is an SPI slave controller */ + bool slave; + /* Flag indicating this is an SPI target controller */ + bool target; + }; /* * on some hardware transfer / message size may be constrained @@ -649,7 +655,10 @@ struct spi_controller { struct spi_message *message); int (*unprepare_message)(struct spi_controller *ctlr, struct spi_message *message); - int (*slave_abort)(struct spi_controller *ctlr); + union { + int (*slave_abort)(struct spi_controller *ctlr); + int (*target_abort)(struct spi_controller *ctlr); + }; /* * These hooks are for drivers that use a generic implementation @@ -727,6 +736,11 @@ static inline bool spi_controller_is_slave(struct spi_controller *ctlr) return IS_ENABLED(CONFIG_SPI_SLAVE) && ctlr->slave; } +static inline bool spi_controller_is_target(struct spi_controller *ctlr) +{ + return IS_ENABLED(CONFIG_SPI_SLAVE) && ctlr->target; +} + /* PM calls that need to be issued by the driver */ extern int spi_controller_suspend(struct spi_controller *ctlr); extern int spi_controller_resume(struct spi_controller *ctlr); @@ -763,6 +777,21 @@ static inline struct spi_controller *spi_alloc_slave(struct device *host, return __spi_alloc_controller(host, size, true); } +static inline struct spi_controller *spi_alloc_host(struct device *dev, + unsigned int size) +{ + return __spi_alloc_controller(dev, size, false); +} + +static inline struct spi_controller *spi_alloc_target(struct device *dev, + unsigned int size) +{ + if (!IS_ENABLED(CONFIG_SPI_SLAVE)) + return NULL; + + return __spi_alloc_controller(dev, size, true); +} + struct spi_controller *__devm_spi_alloc_controller(struct device *dev, unsigned int size, bool slave); @@ -782,6 +811,21 @@ static inline struct spi_controller *devm_spi_alloc_slave(struct device *dev, return __devm_spi_alloc_controller(dev, size, true); } +static inline struct spi_controller *devm_spi_alloc_host(struct device *dev, + unsigned int size) +{ + return __devm_spi_alloc_controller(dev, size, false); +} + +static inline struct spi_controller *devm_spi_alloc_target(struct device *dev, + unsigned int size) +{ + if (!IS_ENABLED(CONFIG_SPI_SLAVE)) + return NULL; + + return __devm_spi_alloc_controller(dev, size, true); +} + extern int spi_register_controller(struct spi_controller *ctlr); extern int devm_spi_register_controller(struct device *dev, struct spi_controller *ctlr); @@ -1141,6 +1185,7 @@ static inline void spi_message_free(struct spi_message *m) extern int spi_setup(struct spi_device *spi); extern int spi_async(struct spi_device *spi, struct spi_message *message); extern int spi_slave_abort(struct spi_device *spi); +extern int spi_target_abort(struct spi_device *spi); static inline size_t spi_max_message_size(struct spi_device *spi) @@ -1514,6 +1559,9 @@ extern void spi_unregister_device(struct spi_device *spi); extern const struct spi_device_id * spi_get_device_id(const struct spi_device *sdev); +extern const void * +spi_get_device_match_data(const struct spi_device *sdev); + static inline bool spi_transfer_is_last(struct spi_controller *ctlr, struct spi_transfer *xfer) { |