summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/powerpc/include/asm/mmu.h12
-rw-r--r--arch/powerpc/kernel/head_40x.S6
-rw-r--r--arch/powerpc/kernel/paca.c2
-rw-r--r--arch/powerpc/kernel/prom.c29
-rw-r--r--arch/powerpc/kernel/rtas.c2
-rw-r--r--arch/powerpc/kernel/setup_64.c2
-rw-r--r--arch/powerpc/mm/40x_mmu.c14
-rw-r--r--arch/powerpc/mm/44x_mmu.c14
-rw-r--r--arch/powerpc/mm/fsl_booke_mmu.c9
-rw-r--r--arch/powerpc/mm/hash_utils_64.c22
-rw-r--r--arch/powerpc/mm/init_32.c14
-rw-r--r--arch/powerpc/mm/init_64.c1
-rw-r--r--arch/powerpc/mm/ppc_mmu_32.c15
-rw-r--r--arch/powerpc/mm/tlb_nohash.c14
-rw-r--r--include/linux/memblock.h1
-rw-r--r--mm/memblock.c8
16 files changed, 125 insertions, 40 deletions
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 7ebf42ed84a2..bb40a06d3b77 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -2,6 +2,8 @@
#define _ASM_POWERPC_MMU_H_
#ifdef __KERNEL__
+#include <linux/types.h>
+
#include <asm/asm-compat.h>
#include <asm/feature-fixups.h>
@@ -82,6 +84,16 @@ extern unsigned int __start___mmu_ftr_fixup, __stop___mmu_ftr_fixup;
extern void early_init_mmu(void);
extern void early_init_mmu_secondary(void);
+extern void setup_initial_memory_limit(phys_addr_t first_memblock_base,
+ phys_addr_t first_memblock_size);
+
+#ifdef CONFIG_PPC64
+/* This is our real memory area size on ppc64 server, on embedded, we
+ * make it match the size our of bolted TLB area
+ */
+extern u64 ppc64_rma_size;
+#endif /* CONFIG_PPC64 */
+
#endif /* !__ASSEMBLY__ */
/* The kernel use the constants below to index in the page sizes array.
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index a90625f9b485..8278e8bad5a0 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -923,11 +923,7 @@ initial_mmu:
mtspr SPRN_PID,r0
sync
- /* Configure and load two entries into TLB slots 62 and 63.
- * In case we are pinning TLBs, these are reserved in by the
- * other TLB functions. If not reserving, then it doesn't
- * matter where they are loaded.
- */
+ /* Configure and load one entry into TLB slots 63 */
clrrwi r4,r4,10 /* Mask off the real page number */
ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 139a773853f4..b9ffd7deeed7 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -117,7 +117,7 @@ void __init allocate_pacas(void)
* the first segment. On iSeries they must be within the area mapped
* by the HV, which is HvPagesToMap * HVPAGESIZE bytes.
*/
- limit = min(0x10000000ULL, memblock.rmo_size);
+ limit = min(0x10000000ULL, ppc64_rma_size);
if (firmware_has_feature(FW_FEATURE_ISERIES))
limit = min(limit, HvPagesToMap * HVPAGESIZE);
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 3aec0b980f6a..c3c6a8857544 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -66,6 +66,7 @@
int __initdata iommu_is_off;
int __initdata iommu_force_on;
unsigned long tce_alloc_start, tce_alloc_end;
+u64 ppc64_rma_size;
#endif
static int __init early_parse_mem(char *p)
@@ -492,7 +493,7 @@ static int __init early_init_dt_scan_memory_ppc(unsigned long node,
void __init early_init_dt_add_memory_arch(u64 base, u64 size)
{
-#if defined(CONFIG_PPC64)
+#ifdef CONFIG_PPC64
if (iommu_is_off) {
if (base >= 0x80000000ul)
return;
@@ -501,9 +502,13 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
}
#endif
- memblock_add(base, size);
-
+ /* First MEMBLOCK added, do some special initializations */
+ if (memstart_addr == ~(phys_addr_t)0)
+ setup_initial_memory_limit(base, size);
memstart_addr = min((u64)memstart_addr, base);
+
+ /* Add the chunk to the MEMBLOCK list */
+ memblock_add(base, size);
}
u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
@@ -655,22 +660,6 @@ static void __init phyp_dump_reserve_mem(void)
static inline void __init phyp_dump_reserve_mem(void) {}
#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */
-static void set_boot_memory_limit(void)
-{
-#ifdef CONFIG_PPC32
- /* 601 can only access 16MB at the moment */
- if (PVR_VER(mfspr(SPRN_PVR)) == 1)
- memblock_set_current_limit(0x01000000);
- /* 8xx can only access 8MB at the moment */
- else if (PVR_VER(mfspr(SPRN_PVR)) == 0x50)
- memblock_set_current_limit(0x00800000);
- else
- memblock_set_current_limit(0x10000000);
-#else
- memblock_set_current_limit(memblock.rmo_size);
-#endif
-}
-
void __init early_init_devtree(void *params)
{
phys_addr_t limit;
@@ -734,8 +723,6 @@ void __init early_init_devtree(void *params)
DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
- set_boot_memory_limit();
-
/* We may need to relocate the flat tree, do it now.
* FIXME .. and the initrd too? */
move_device_tree();
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index d0516dbee762..1662777be5dd 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -934,7 +934,7 @@ void __init rtas_initialize(void)
*/
#ifdef CONFIG_PPC64
if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) {
- rtas_region = min(memblock.rmo_size, RTAS_INSTANTIATE_MAX);
+ rtas_region = min(ppc64_rma_size, RTAS_INSTANTIATE_MAX);
ibm_suspend_me_token = rtas_token("ibm,suspend-me");
}
#endif
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index d135f93cb0f6..4360944b60f0 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -487,7 +487,7 @@ static void __init emergency_stack_init(void)
* bringup, we need to get at them in real mode. This means they
* must also be within the RMO region.
*/
- limit = min(slb0_limit(), memblock.rmo_size);
+ limit = min(slb0_limit(), ppc64_rma_size);
for_each_possible_cpu(i) {
unsigned long sp;
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index 58969b51f454..5810967511d4 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -141,7 +141,19 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
* coverage with normal-sized pages (or other reasons) do not
* attempt to allocate outside the allowed range.
*/
- memblock_set_current_limit(memstart_addr + mapped);
+ memblock_set_current_limit(mapped);
return mapped;
}
+
+void setup_initial_memory_limit(phys_addr_t first_memblock_base,
+ phys_addr_t first_memblock_size)
+{
+ /* We don't currently support the first MEMBLOCK not mapping 0
+ * physical on those processors
+ */
+ BUG_ON(first_memblock_base != 0);
+
+ /* 40x can only access 16MB at the moment (see head_40x.S) */
+ memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
+}
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index d8c6efb32bc6..024acab588fd 100644
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -24,6 +24,8 @@
*/
#include <linux/init.h>
+#include <linux/memblock.h>
+
#include <asm/mmu.h>
#include <asm/system.h>
#include <asm/page.h>
@@ -213,6 +215,18 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
return total_lowmem;
}
+void setup_initial_memory_limit(phys_addr_t first_memblock_base,
+ phys_addr_t first_memblock_size)
+{
+ /* We don't currently support the first MEMBLOCK not mapping 0
+ * physical on those processors
+ */
+ BUG_ON(first_memblock_base != 0);
+
+ /* 44x has a 256M TLB entry pinned at boot */
+ memblock_set_current_limit(min_t(u64, first_memblock_size, PPC_PIN_SIZE));
+}
+
#ifdef CONFIG_SMP
void __cpuinit mmu_init_secondary(int cpu)
{
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index e525f862d759..0be8fe24c54e 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -215,3 +215,12 @@ void __init adjust_total_lowmem(void)
memblock_set_current_limit(memstart_addr + __max_low_memory);
}
+
+void setup_initial_memory_limit(phys_addr_t first_memblock_base,
+ phys_addr_t first_memblock_size)
+{
+ phys_addr_t limit = first_memblock_base + first_memblock_size;
+
+ /* 64M mapped initially according to head_fsl_booke.S */
+ memblock_set_current_limit(min_t(u64, limit, 0x04000000));
+}
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index b05890e23813..83f534d862db 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -649,7 +649,7 @@ static void __init htab_initialize(void)
#ifdef CONFIG_DEBUG_PAGEALLOC
linear_map_hash_count = memblock_end_of_DRAM() >> PAGE_SHIFT;
linear_map_hash_slots = __va(memblock_alloc_base(linear_map_hash_count,
- 1, memblock.rmo_size));
+ 1, ppc64_rma_size));
memset(linear_map_hash_slots, 0, linear_map_hash_count);
#endif /* CONFIG_DEBUG_PAGEALLOC */
@@ -1248,3 +1248,23 @@ void kernel_map_pages(struct page *page, int numpages, int enable)
local_irq_restore(flags);
}
#endif /* CONFIG_DEBUG_PAGEALLOC */
+
+void setup_initial_memory_limit(phys_addr_t first_memblock_base,
+ phys_addr_t first_memblock_size)
+{
+ /* We don't currently support the first MEMBLOCK not mapping 0
+ * physical on those processors
+ */
+ BUG_ON(first_memblock_base != 0);
+
+ /* On LPAR systems, the first entry is our RMA region,
+ * non-LPAR 64-bit hash MMU systems don't have a limitation
+ * on real mode access, but using the first entry works well
+ * enough. We also clamp it to 1G to avoid some funky things
+ * such as RTAS bugs etc...
+ */
+ ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000);
+
+ /* Finally limit subsequent allocations */
+ memblock_set_current_limit(ppc64_rma_size);
+}
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 59b208b7ec6f..742da43b4ab6 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -237,3 +237,17 @@ void free_initrd_mem(unsigned long start, unsigned long end)
}
#endif
+
+#ifdef CONFIG_8xx /* No 8xx specific .c file to put that in ... */
+void setup_initial_memory_limit(phys_addr_t first_memblock_base,
+ phys_addr_t first_memblock_size)
+{
+ /* We don't currently support the first MEMBLOCK not mapping 0
+ * physical on those processors
+ */
+ BUG_ON(first_memblock_base != 0);
+
+ /* 8xx can only access 8MB at the moment */
+ memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
+}
+#endif /* CONFIG_8xx */
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 71f1415e2472..9e081ffbf0f2 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -328,3 +328,4 @@ int __meminit vmemmap_populate(struct page *start_page,
return 0;
}
#endif /* CONFIG_SPARSEMEM_VMEMMAP */
+
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index 7d34e170e80f..11571e118831 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -271,3 +271,18 @@ void __init MMU_init_hw(void)
if ( ppc_md.progress ) ppc_md.progress("hash:done", 0x205);
}
+
+void setup_initial_memory_limit(phys_addr_t first_memblock_base,
+ phys_addr_t first_memblock_size)
+{
+ /* We don't currently support the first MEMBLOCK not mapping 0
+ * physical on those processors
+ */
+ BUG_ON(first_memblock_base != 0);
+
+ /* 601 can only access 16MB at the moment */
+ if (PVR_VER(mfspr(SPRN_PVR)) == 1)
+ memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01000000));
+ else /* Anything else has 256M mapped */
+ memblock_set_current_limit(min_t(u64, first_memblock_size, 0x10000000));
+}
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 7ba32e762990..a086ed562606 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -446,4 +446,18 @@ void __cpuinit early_init_mmu_secondary(void)
__early_init_mmu(0);
}
+void setup_initial_memory_limit(phys_addr_t first_memblock_base,
+ phys_addr_t first_memblock_size)
+{
+ /* On Embedded 64-bit, we adjust the RMA size to match
+ * the bolted TLB entry. We know for now that only 1G
+ * entries are supported though that may eventually
+ * change. We crop it to the size of the first MEMBLOCK to
+ * avoid going over total available memory just in case...
+ */
+ ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000);
+
+ /* Finally limit subsequent allocations */
+ memblock_set_current_limit(ppc64_memblock_base + ppc64_rma_size);
+}
#endif /* CONFIG_PPC64 */
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index c4f6e53264ed..71b8edc6ede8 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -33,7 +33,6 @@ struct memblock_type {
struct memblock {
unsigned long debug;
- u64 rmo_size;
u64 current_limit;
struct memblock_type memory;
struct memblock_type reserved;
diff --git a/mm/memblock.c b/mm/memblock.c
index 770c5bfac2cd..73d903ebf3d4 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -49,7 +49,6 @@ void memblock_dump_all(void)
return;
pr_info("MEMBLOCK configuration:\n");
- pr_info(" rmo_size = 0x%llx\n", (unsigned long long)memblock.rmo_size);
pr_info(" memory.size = 0x%llx\n", (unsigned long long)memblock.memory.size);
memblock_dump(&memblock.memory, "memory");
@@ -195,10 +194,6 @@ static long memblock_add_region(struct memblock_type *type, u64 base, u64 size)
long memblock_add(u64 base, u64 size)
{
- /* On pSeries LPAR systems, the first MEMBLOCK is our RMO region. */
- if (base == 0)
- memblock.rmo_size = size;
-
return memblock_add_region(&memblock.memory, base, size);
}
@@ -459,9 +454,6 @@ void __init memblock_enforce_memory_limit(u64 memory_limit)
break;
}
- if (memblock.memory.regions[0].size < memblock.rmo_size)
- memblock.rmo_size = memblock.memory.regions[0].size;
-
memory_limit = memblock_end_of_DRAM();
/* And truncate any reserves above the limit also. */
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-27 14:05:48 +0000