diff options
| -rw-r--r-- | arch/arm/boot/dts/hi3620.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/omap3-n900.dts | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/r8a7791.dtsi | 4 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/gpmc-nand.c | 18 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/omap4-common.c | 4 | ||||
| -rw-r--r-- | include/dt-bindings/pinctrl/dra.h | 7 |
6 files changed, 22 insertions, 15 deletions
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index ab1116d086be..83a5b8685bd9 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -73,7 +73,7 @@ L2: l2-cache { compatible = "arm,pl310-cache"; - reg = <0xfc10000 0x100000>; + reg = <0x100000 0x100000>; interrupts = <0 15 4>; cache-unified; cache-level = <2>; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 1fe45d1f75ec..b15f1a77d684 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -353,7 +353,7 @@ }; twl_power: power { - compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; + compatible = "ti,twl4030-power-n900"; ti,use_poweroff; }; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 8d7ffaeff6e0..79f68acfd5d4 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -540,9 +540,9 @@ #clock-cells = <0>; clock-output-names = "sd1"; }; - sd2_clk: sd3_clk@e615007c { + sd2_clk: sd3_clk@e615026c { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615007c 0 4>; + reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; clock-output-names = "sd2"; diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 17cd39360afe..93914d220069 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -50,6 +50,16 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) soc_is_omap54xx() || soc_is_dra7xx()) return 1; + if (ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW || + ecc_opt == OMAP_ECC_BCH8_CODE_HW_DETECTION_SW) { + if (cpu_is_omap24xx()) + return 0; + else if (cpu_is_omap3630() && (GET_OMAP_REVISION() == 0)) + return 0; + else + return 1; + } + /* OMAP3xxx do not have ELM engine, so cannot support ECC schemes * which require H/W based ECC error detection */ if ((cpu_is_omap34xx() || cpu_is_omap3630()) && @@ -57,14 +67,6 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) (ecc_opt == OMAP_ECC_BCH8_CODE_HW))) return 0; - /* - * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1 - * and AM33xx derivates. Other chips may be added if confirmed to work. - */ - if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW) && - (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) - return 0; - /* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */ if (ecc_opt == OMAP_ECC_HAM1_CODE_HW) return 1; diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 539e8106eb96..a0fe747634c1 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -168,6 +168,10 @@ static void omap4_l2c310_write_sec(unsigned long val, unsigned reg) smc_op = OMAP4_MON_L2X0_PREFETCH_INDEX; break; + case L310_POWER_CTRL: + pr_info_once("OMAP L2C310: ROM does not support power control setting\n"); + return; + default: WARN_ONCE(1, "OMAP L2C310: ignoring write to reg 0x%x\n", reg); return; diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h index 002a2855c046..3d33794e4f3e 100644 --- a/include/dt-bindings/pinctrl/dra.h +++ b/include/dt-bindings/pinctrl/dra.h @@ -30,7 +30,8 @@ #define MUX_MODE14 0xe #define MUX_MODE15 0xf -#define PULL_ENA (1 << 16) +#define PULL_ENA (0 << 16) +#define PULL_DIS (1 << 16) #define PULL_UP (1 << 17) #define INPUT_EN (1 << 18) #define SLEWCONTROL (1 << 19) @@ -38,10 +39,10 @@ #define WAKEUP_EVENT (1 << 25) /* Active pin states */ -#define PIN_OUTPUT 0 +#define PIN_OUTPUT (0 | PULL_DIS) #define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP) #define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA) -#define PIN_INPUT INPUT_EN +#define PIN_INPUT (INPUT_EN | PULL_DIS) #define PIN_INPUT_SLEW (INPUT_EN | SLEWCONTROL) #define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP) #define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN) |