diff options
| -rw-r--r-- | Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt | 31 | ||||
| -rw-r--r-- | drivers/pwm/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/pwm/Makefile | 1 | ||||
| -rw-r--r-- | drivers/pwm/pwm-tipwmss.c | 139 | ||||
| -rw-r--r-- | drivers/pwm/pwm-tipwmss.h | 39 |
5 files changed, 221 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt new file mode 100644 index 000000000000..f7eae77f8354 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt @@ -0,0 +1,31 @@ +TI SOC based PWM Subsystem + +Required properties: +- compatible: Must be "ti,am33xx-pwmss"; +- reg: physical base address and size of the registers map. +- address-cells: Specify the number of u32 entries needed in child nodes. + Should set to 1. +- size-cells: specify number of u32 entries needed to specify child nodes size + in reg property. Should set to 1. +- ranges: describes the address mapping of a memory-mapped bus. Should set to + physical address map of child's base address, physical address within + parent's address space and length of the address map. For am33xx, + 3 set of child register maps present, ECAP register space, EQEP + register space, EHRPWM register space. + +Also child nodes should also populated under PWMSS DT node. + +Example: +pwmss0: pwmss@48300000 { + compatible = "ti,am33xx-pwmss"; + reg = <0x48300000 0x10>; + ti,hwmods = "epwmss0"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0x48300100 0x48300100 0x80 /* ECAP */ + 0x48300180 0x48300180 0x80 /* EQEP */ + 0x48300200 0x48300200 0x80>; /* EHRPWM */ + + /* child nodes go here */ +}; diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 6e556c7da81e..3dcb76d86a97 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -136,6 +136,7 @@ config PWM_TEGRA config PWM_TIECAP tristate "ECAP PWM support" depends on SOC_AM33XX + select PWM_TIPWMSS help PWM driver support for the ECAP APWM controller found on AM33XX TI SOC @@ -146,6 +147,7 @@ config PWM_TIECAP config PWM_TIEHRPWM tristate "EHRPWM PWM support" depends on SOC_AM33XX + select PWM_TIPWMSS help PWM driver support for the EHRPWM controller found on AM33XX TI SOC @@ -153,6 +155,15 @@ config PWM_TIEHRPWM To compile this driver as a module, choose M here: the module will be called pwm-tiehrpwm. +config PWM_TIPWMSS + bool + depends on SOC_AM33XX && (PWM_TIEHRPWM || PWM_TIECAP) + help + PWM Subsystem driver support for AM33xx SOC. + + PWM submodules require PWM config space access from submodule + drivers and require common parent driver support. + config PWM_TWL6030 tristate "TWL6030 PWM support" depends on TWL4030_CORE diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 3b3f4c9aa4ef..4fb39f8b6ba9 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -12,5 +12,6 @@ obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o obj-$(CONFIG_PWM_TIEHRPWM) += pwm-tiehrpwm.o +obj-$(CONFIG_PWM_TIPWMSS) += pwm-tipwmss.o obj-$(CONFIG_PWM_TWL6030) += pwm-twl6030.o obj-$(CONFIG_PWM_VT8500) += pwm-vt8500.o diff --git a/drivers/pwm/pwm-tipwmss.c b/drivers/pwm/pwm-tipwmss.c new file mode 100644 index 000000000000..3448a1c88590 --- /dev/null +++ b/drivers/pwm/pwm-tipwmss.c @@ -0,0 +1,139 @@ +/* + * TI PWM Subsystem driver + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/pm_runtime.h> +#include <linux/of_device.h> + +#include "pwm-tipwmss.h" + +#define PWMSS_CLKCONFIG 0x8 /* Clock gating reg */ +#define PWMSS_CLKSTATUS 0xc /* Clock gating status reg */ + +struct pwmss_info { + void __iomem *mmio_base; + struct mutex pwmss_lock; + u16 pwmss_clkconfig; +}; + +u16 pwmss_submodule_state_change(struct device *dev, int set) +{ + struct pwmss_info *info = dev_get_drvdata(dev); + u16 val; + + mutex_lock(&info->pwmss_lock); + val = readw(info->mmio_base + PWMSS_CLKCONFIG); + val |= set; + writew(val , info->mmio_base + PWMSS_CLKCONFIG); + mutex_unlock(&info->pwmss_lock); + + return readw(info->mmio_base + PWMSS_CLKSTATUS); +} +EXPORT_SYMBOL(pwmss_submodule_state_change); + +static const struct of_device_id pwmss_of_match[] = { + { .compatible = "ti,am33xx-pwmss" }, + {}, +}; +MODULE_DEVICE_TABLE(of, pwmss_of_match); + +static int pwmss_probe(struct platform_device *pdev) +{ + int ret; + struct resource *r; + struct pwmss_info *info; + struct device_node *node = pdev->dev.of_node; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + mutex_init(&info->pwmss_lock); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no memory resource defined\n"); + return -ENODEV; + } + + info->mmio_base = devm_request_and_ioremap(&pdev->dev, r); + if (!info->mmio_base) + return -EADDRNOTAVAIL; + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + platform_set_drvdata(pdev, info); + + /* Populate all the child nodes here... */ + ret = of_platform_populate(node, NULL, NULL, &pdev->dev); + if (ret) + dev_err(&pdev->dev, "no child node found\n"); + + return ret; +} + +static int pwmss_remove(struct platform_device *pdev) +{ + struct pwmss_info *info = platform_get_drvdata(pdev); + + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + mutex_destroy(&info->pwmss_lock); + return 0; +} + +static int pwmss_suspend(struct device *dev) +{ + struct pwmss_info *info = dev_get_drvdata(dev); + + info->pwmss_clkconfig = readw(info->mmio_base + PWMSS_CLKCONFIG); + pm_runtime_put_sync(dev); + return 0; +} + +static int pwmss_resume(struct device *dev) +{ + struct pwmss_info *info = dev_get_drvdata(dev); + + pm_runtime_get_sync(dev); + writew(info->pwmss_clkconfig, info->mmio_base + PWMSS_CLKCONFIG); + return 0; +} + +static SIMPLE_DEV_PM_OPS(pwmss_pm_ops, pwmss_suspend, pwmss_resume); + +static struct platform_driver pwmss_driver = { + .driver = { + .name = "pwmss", + .owner = THIS_MODULE, + .pm = &pwmss_pm_ops, + .of_match_table = pwmss_of_match, + }, + .probe = pwmss_probe, + .remove = pwmss_remove, +}; + +module_platform_driver(pwmss_driver); + +MODULE_DESCRIPTION("PWM Subsystem driver"); +MODULE_AUTHOR("Texas Instruments"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-tipwmss.h b/drivers/pwm/pwm-tipwmss.h new file mode 100644 index 000000000000..11f76a1e266b --- /dev/null +++ b/drivers/pwm/pwm-tipwmss.h @@ -0,0 +1,39 @@ +/* + * TI PWM Subsystem driver + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __TIPWMSS_H +#define __TIPWMSS_H + +#ifdef CONFIG_PWM_TIPWMSS +/* PWM substem clock gating */ +#define PWMSS_ECAPCLK_EN BIT(0) +#define PWMSS_ECAPCLK_STOP_REQ BIT(1) +#define PWMSS_EPWMCLK_EN BIT(8) +#define PWMSS_EPWMCLK_STOP_REQ BIT(9) + +#define PWMSS_ECAPCLK_EN_ACK BIT(0) +#define PWMSS_EPWMCLK_EN_ACK BIT(8) + +extern u16 pwmss_submodule_state_change(struct device *dev, int set); +#else +static inline u16 pwmss_submodule_state_change(struct device *dev, int set) +{ + /* return success status value */ + return 0xFFFF; +} +#endif +#endif /* __TIPWMSS_H */ |