diff options
| -rw-r--r-- | drivers/cpufreq/Kconfig.x86 | 1 | ||||
| -rw-r--r-- | drivers/cpufreq/intel_pstate.c | 171 |
2 files changed, 1 insertions, 171 deletions
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index adbd1de1cea5..c59bdcb83217 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -5,7 +5,6 @@ config X86_INTEL_PSTATE bool "Intel P state control" depends on X86 - select ACPI_PROCESSOR if ACPI help This driver provides a P state for Intel core processors. The driver implements an internal governor and will become diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index d444000ce148..ef05944d8b16 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -34,10 +34,6 @@ #include <asm/cpu_device_id.h> #include <asm/cpufeature.h> -#if IS_ENABLED(CONFIG_ACPI) -#include <acpi/processor.h> -#endif - #define BYT_RATIOS 0x66a #define BYT_VIDS 0x66b #define BYT_TURBO_RATIOS 0x66c @@ -117,9 +113,6 @@ struct cpudata { u64 prev_mperf; u64 prev_tsc; struct sample sample; -#if IS_ENABLED(CONFIG_ACPI) - struct acpi_processor_performance acpi_perf_data; -#endif }; static struct cpudata **all_cpu_data; @@ -150,7 +143,6 @@ struct cpu_defaults { static struct pstate_adjust_policy pid_params; static struct pstate_funcs pstate_funcs; static int hwp_active; -static int no_acpi_perf; struct perf_limits { int no_turbo; @@ -197,153 +189,6 @@ static struct perf_limits *limits = &performance_limits; static struct perf_limits *limits = &powersave_limits; #endif -#if IS_ENABLED(CONFIG_ACPI) -/* - * The max target pstate ratio is a 8 bit value in both PLATFORM_INFO MSR and - * in TURBO_RATIO_LIMIT MSR, which pstate driver stores in max_pstate and - * max_turbo_pstate fields. The PERF_CTL MSR contains 16 bit value for P state - * ratio, out of it only high 8 bits are used. For example 0x1700 is setting - * target ratio 0x17. The _PSS control value stores in a format which can be - * directly written to PERF_CTL MSR. But in intel_pstate driver this shift - * occurs during write to PERF_CTL (E.g. for cores core_set_pstate()). - * This function converts the _PSS control value to intel pstate driver format - * for comparison and assignment. - */ -static int convert_to_native_pstate_format(struct cpudata *cpu, int index) -{ - return cpu->acpi_perf_data.states[index].control >> 8; -} - -static int intel_pstate_init_perf_limits(struct cpufreq_policy *policy) -{ - struct cpudata *cpu; - int ret; - bool turbo_absent = false; - int max_pstate_index; - int min_pss_ctl, max_pss_ctl, turbo_pss_ctl; - int i; - - cpu = all_cpu_data[policy->cpu]; - - pr_debug("intel_pstate: default limits 0x%x 0x%x 0x%x\n", - cpu->pstate.min_pstate, cpu->pstate.max_pstate, - cpu->pstate.turbo_pstate); - - if (!cpu->acpi_perf_data.shared_cpu_map && - zalloc_cpumask_var_node(&cpu->acpi_perf_data.shared_cpu_map, - GFP_KERNEL, cpu_to_node(policy->cpu))) { - return -ENOMEM; - } - - ret = acpi_processor_register_performance(&cpu->acpi_perf_data, - policy->cpu); - if (ret) - return ret; - - /* - * Check if the control value in _PSS is for PERF_CTL MSR, which should - * guarantee that the states returned by it map to the states in our - * list directly. - */ - if (cpu->acpi_perf_data.control_register.space_id != - ACPI_ADR_SPACE_FIXED_HARDWARE) - return -EIO; - - pr_debug("intel_pstate: CPU%u - ACPI _PSS perf data\n", policy->cpu); - for (i = 0; i < cpu->acpi_perf_data.state_count; i++) - pr_debug(" %cP%d: %u MHz, %u mW, 0x%x\n", - (i == cpu->acpi_perf_data.state ? '*' : ' '), i, - (u32) cpu->acpi_perf_data.states[i].core_frequency, - (u32) cpu->acpi_perf_data.states[i].power, - (u32) cpu->acpi_perf_data.states[i].control); - - /* - * If there is only one entry _PSS, simply ignore _PSS and continue as - * usual without taking _PSS into account - */ - if (cpu->acpi_perf_data.state_count < 2) - return 0; - - turbo_pss_ctl = convert_to_native_pstate_format(cpu, 0); - min_pss_ctl = convert_to_native_pstate_format(cpu, - cpu->acpi_perf_data.state_count - 1); - /* Check if there is a turbo freq in _PSS */ - if (turbo_pss_ctl <= cpu->pstate.max_pstate && - turbo_pss_ctl > cpu->pstate.min_pstate) { - pr_debug("intel_pstate: no turbo range exists in _PSS\n"); - limits->no_turbo = limits->turbo_disabled = 1; - cpu->pstate.turbo_pstate = cpu->pstate.max_pstate; - turbo_absent = true; - } - - /* Check if the max non turbo p state < Intel P state max */ - max_pstate_index = turbo_absent ? 0 : 1; - max_pss_ctl = convert_to_native_pstate_format(cpu, max_pstate_index); - if (max_pss_ctl < cpu->pstate.max_pstate && - max_pss_ctl > cpu->pstate.min_pstate) - cpu->pstate.max_pstate = max_pss_ctl; - - /* check If min perf > Intel P State min */ - if (min_pss_ctl > cpu->pstate.min_pstate && - min_pss_ctl < cpu->pstate.max_pstate) { - cpu->pstate.min_pstate = min_pss_ctl; - policy->cpuinfo.min_freq = min_pss_ctl * cpu->pstate.scaling; - } - - if (turbo_absent) - policy->cpuinfo.max_freq = cpu->pstate.max_pstate * - cpu->pstate.scaling; - else { - policy->cpuinfo.max_freq = cpu->pstate.turbo_pstate * - cpu->pstate.scaling; - /* - * The _PSS table doesn't contain whole turbo frequency range. - * This just contains +1 MHZ above the max non turbo frequency, - * with control value corresponding to max turbo ratio. But - * when cpufreq set policy is called, it will call with this - * max frequency, which will cause a reduced performance as - * this driver uses real max turbo frequency as the max - * frequeny. So correct this frequency in _PSS table to - * correct max turbo frequency based on the turbo ratio. - * Also need to convert to MHz as _PSS freq is in MHz. - */ - cpu->acpi_perf_data.states[0].core_frequency = - turbo_pss_ctl * 100; - } - - pr_debug("intel_pstate: Updated limits using _PSS 0x%x 0x%x 0x%x\n", - cpu->pstate.min_pstate, cpu->pstate.max_pstate, - cpu->pstate.turbo_pstate); - pr_debug("intel_pstate: policy max_freq=%d Khz min_freq = %d KHz\n", - policy->cpuinfo.max_freq, policy->cpuinfo.min_freq); - - return 0; -} - -static int intel_pstate_exit_perf_limits(struct cpufreq_policy *policy) -{ - struct cpudata *cpu; - - if (!no_acpi_perf) - return 0; - - cpu = all_cpu_data[policy->cpu]; - acpi_processor_unregister_performance(policy->cpu); - return 0; -} - -#else -static int intel_pstate_init_perf_limits(struct cpufreq_policy *policy) -{ - return 0; -} - -static int intel_pstate_exit_perf_limits(struct cpufreq_policy *policy) -{ - return 0; -} -#endif - static inline void pid_reset(struct _pid *pid, int setpoint, int busy, int deadband, int integral) { pid->setpoint = setpoint; @@ -1303,30 +1148,18 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy) policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling; policy->cpuinfo.max_freq = cpu->pstate.turbo_pstate * cpu->pstate.scaling; - if (!no_acpi_perf) - intel_pstate_init_perf_limits(policy); - /* - * If there is no acpi perf data or error, we ignore and use Intel P - * state calculated limits, So this is not fatal error. - */ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; cpumask_set_cpu(policy->cpu, policy->cpus); return 0; } -static int intel_pstate_cpu_exit(struct cpufreq_policy *policy) -{ - return intel_pstate_exit_perf_limits(policy); -} - static struct cpufreq_driver intel_pstate_driver = { .flags = CPUFREQ_CONST_LOOPS, .verify = intel_pstate_verify_policy, .setpolicy = intel_pstate_set_policy, .get = intel_pstate_get, .init = intel_pstate_cpu_init, - .exit = intel_pstate_cpu_exit, .stop_cpu = intel_pstate_stop_cpu, .name = "intel_pstate", }; @@ -1368,6 +1201,7 @@ static void copy_cpu_funcs(struct pstate_funcs *funcs) } #if IS_ENABLED(CONFIG_ACPI) +#include <acpi/processor.h> static bool intel_pstate_no_acpi_pss(void) { @@ -1563,9 +1397,6 @@ static int __init intel_pstate_setup(char *str) force_load = 1; if (!strcmp(str, "hwp_only")) hwp_only = 1; - if (!strcmp(str, "no_acpi")) - no_acpi_perf = 1; - return 0; } early_param("intel_pstate", intel_pstate_setup); |