diff options
92 files changed, 4413 insertions, 2254 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/g762.txt b/Documentation/devicetree/bindings/hwmon/g762.txt deleted file mode 100644 index 6d154c4923de..000000000000 --- a/Documentation/devicetree/bindings/hwmon/g762.txt +++ /dev/null @@ -1,47 +0,0 @@ -GMT G762/G763 PWM Fan controller - -Required node properties: - - - "compatible": must be either "gmt,g762" or "gmt,g763" - - "reg": I2C bus address of the device - - "clocks": a fixed clock providing input clock frequency - on CLK pin of the chip. - -Optional properties: - - - "fan_startv": fan startup voltage. Accepted values are 0, 1, 2 and 3. - The higher the more. - - - "pwm_polarity": pwm polarity. Accepted values are 0 (positive duty) - and 1 (negative duty). - - - "fan_gear_mode": fan gear mode. Supported values are 0, 1 and 2. - -If an optional property is not set in .dts file, then current value is kept -unmodified (e.g. u-boot installed value). - -Additional information on operational parameters for the device is available -in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available -at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf. - -Example g762 node: - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - g762_clk: fixedclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <8192>; - } - } - - g762: g762@3e { - compatible = "gmt,g762"; - reg = <0x3e>; - clocks = <&g762_clk> - fan_gear_mode = <0>; /* chip default */ - fan_startv = <1>; /* chip default */ - pwm_polarity = <0>; /* chip default */ - }; diff --git a/Documentation/devicetree/bindings/hwmon/gmt,g762.yaml b/Documentation/devicetree/bindings/hwmon/gmt,g762.yaml new file mode 100644 index 000000000000..8e1bffd252e6 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/gmt,g762.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/gmt,g762.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GMT G761/G762/G763 PWM Fan controller + +maintainers: + - Christian Marangi <ansuelsmth@gmail.com> + +description: | + GMT G761/G762/G763 PWM Fan controller. + + G761 supports an internal-clock hence the clocks property is optional. + If not defined, internal-clock will be used. (31KHz is the clock of + the internal crystal oscillator) + + If an optional property is not set in DT, then current value is kept + unmodified (e.g. bootloader installed value). + + Additional information on operational parameters for the device is available + in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available + at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf. + +properties: + compatible: + enum: + - gmt,g761 + - gmt,g762 + - gmt,g763 + + reg: + maxItems: 1 + + clocks: + description: a fixed clock providing input clock frequency on CLK + pin of the chip. + maxItems: 1 + + fan_startv: + description: Fan startup voltage step + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + pwm_polarity: + description: PWM polarity (positive or negative duty) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + fan_gear_mode: + description: FAN gear mode. Configure High speed fan setting factor + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + +required: + - compatible + - reg + +if: + properties: + compatible: + contains: + enum: + - gmt,g762 + - gmt,g763 +then: + required: + - clocks + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + + g761@1e { + compatible = "gmt,g761"; + reg = <0x1e>; + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml new file mode 100644 index 000000000000..4f5837a30773 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/maxim,max6639.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim max6639 + +maintainers: + - Naresh Solanki <naresh.solanki@9elements.com> + +description: | + The MAX6639 is a 2-channel temperature monitor with dual, automatic, PWM + fan-speed controller. It monitors its own temperature and one external + diode-connected transistor or the temperatures of two external diode-connected + transistors, typically available in CPUs, FPGAs, or GPUs. + + Datasheets: + https://datasheets.maximintegrated.com/en/ds/MAX6639-MAX6639F.pdf + +properties: + compatible: + enum: + - maxim,max6639 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#pwm-cells': + const: 3 + +required: + - compatible + - reg + +patternProperties: + "^fan@[0-1]$": + type: object + description: + Represents the two fans and their specific configuration. + + $ref: fan-common.yaml# + + unevaluatedProperties: false + + properties: + reg: + description: + The fan number. + + required: + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + fan1: fan-controller@10 { + compatible = "maxim,max6639"; + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <3>; + + fan@0 { + reg = <0x0>; + pulses-per-revolution = <2>; + max-rpm = <4000>; + target-rpm = <1000>; + pwms = <&fan1 0 25000 0>; + }; + + fan@1 { + reg = <0x1>; + pulses-per-revolution = <2>; + max-rpm = <8000>; + pwms = <&fan1 1 25000 0>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml index df86c2c92037..6ae961732e6b 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml @@ -66,6 +66,14 @@ properties: description: phandle to the regulator that provides the VS supply typically in range from 2.7 V to 5.5 V. + ti,alert-polarity-active-high: + description: Alert pin is asserted based on the value of Alert polarity Bit + of Mask/Enable register. Default value is Normal (0 which maps to + active-low open collector). The other value is Inverted + (1 which maps to active-high open collector). Specify this property to set + the alert polarity to active-high. + $ref: /schemas/types.yaml#/definitions/flag + required: - compatible - reg @@ -88,5 +96,6 @@ examples: label = "vdd_3v0"; shunt-resistor = <1000>; vs-supply = <&vdd_3v0>; + ti,alert-polarity-active-high; }; }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml index 8b5307c875ff..0ad10d43fac0 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml @@ -9,6 +9,14 @@ title: TMP108 temperature sensor maintainers: - Krzysztof Kozlowski <krzk@kernel.org> +description: | + The TMP108 is a digital-output temperature sensor with a + dynamically-programmable limit window, and under- and overtemperature + alert functions. + + Datasheets: + https://www.ti.com/product/TMP108 + properties: compatible: enum: @@ -24,6 +32,9 @@ properties: "#thermal-sensor-cells": const: 0 + vcc-supply: + description: phandle to the regulator that provides the V+ supply + required: - compatible - reg @@ -45,6 +56,7 @@ examples: interrupts = <7 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&tmp_alrt>; + vcc-supply = <&supply>; #thermal-sensor-cells = <0>; }; }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 0a419453d183..03e290cb65c3 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -168,6 +168,8 @@ properties: - isil,isl69269 # Intersil ISL76682 Ambient Light Sensor - isil,isl76682 + # JEDEC JESD300 (SPD5118) Hub and Serial Presence Detect + - jedec,spd5118 # Linear Technology LTC2488 - lineartechnology,ltc2488 # 5 Bit Programmable, Pulse-Width Modulator @@ -286,14 +288,22 @@ properties: - mps,mp2857 # Monolithic Power Systems Inc. multi-phase controller mp2888 - mps,mp2888 + # Monolithic Power Systems Inc. multi-phase controller mp2891 + - mps,mp2891 # Monolithic Power Systems Inc. multi-phase controller mp2971 - mps,mp2971 # Monolithic Power Systems Inc. multi-phase controller mp2973 - mps,mp2973 # Monolithic Power Systems Inc. multi-phase controller mp2975 - mps,mp2975 + # Monolithic Power Systems Inc. multi-phase controller mp2993 + - mps,mp2993 + # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5920 + - mps,mp5920 # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990 - mps,mp5990 + # Monolithic Power Systems Inc. digital step-down converter mp9941 + - mps,mp9941 # Monolithic Power Systems Inc. synchronous step-down converter mpq8785 - mps,mpq8785 # Temperature sensor with integrated fan control diff --git a/Documentation/hwmon/adm1021.rst b/Documentation/hwmon/adm1021.rst deleted file mode 100644 index 116fb2019956..000000000000 --- a/Documentation/hwmon/adm1021.rst +++ /dev/null @@ -1,153 +0,0 @@ -Kernel driver adm1021 -===================== - -Supported chips: - - * Analog Devices ADM1021 - - Prefix: 'adm1021' - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the Analog Devices website - - * Analog Devices ADM1021A/ADM1023 - - Prefix: 'adm1023' - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the Analog Devices website - - * Genesys Logic GL523SM - - Prefix: 'gl523sm' - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: - - * Maxim MAX1617 - - Prefix: 'max1617' - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the Maxim website - - * Maxim MAX1617A - - Prefix: 'max1617a' - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the Maxim website - - * National Semiconductor LM84 - - Prefix: 'lm84' - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the National Semiconductor website - - * Philips NE1617 - - Prefix: 'max1617' (probably detected as a max1617) - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the Philips website - - * Philips NE1617A - - Prefix: 'max1617' (probably detected as a max1617) - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the Philips website - - * TI THMC10 - - Prefix: 'thmc10' - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the TI website - - * Onsemi MC1066 - - Prefix: 'mc1066' - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the Onsemi website - - -Authors: - - Frodo Looijaard <frodol@dds.nl>, - - Philip Edelbrock <phil@netroedge.com> - -Module Parameters ------------------ - -* read_only: int - Don't set any values, read only mode - - -Description ------------ - -The chips supported by this driver are very similar. The Maxim MAX1617 is -the oldest; it has the problem that it is not very well detectable. The -MAX1617A solves that. The ADM1021 is a straight clone of the MAX1617A. -Ditto for the THMC10. From here on, we will refer to all these chips as -ADM1021-clones. - -The ADM1021 and MAX1617A reports a die code, which is a sort of revision -code. This can help us pinpoint problems; it is not very useful -otherwise. - -ADM1021-clones implement two temperature sensors. One of them is internal, -and measures the temperature of the chip itself; the other is external and -is realised in the form of a transistor-like device. A special alarm -indicates whether the remote sensor is connected. - -Each sensor has its own low and high limits. When they are crossed, the -corresponding alarm is set and remains on as long as the temperature stays -out of range. Temperatures are measured in degrees Celsius. Measurements -are possible between -65 and +127 degrees, with a resolution of one degree. - -If an alarm triggers, it will remain triggered until the hardware register -is read at least once. This means that the cause for the alarm may already -have disappeared! - -This driver only updates its values each 1.5 seconds; reading it more often -will do no harm, but will return 'old' values. It is possible to make -ADM1021-clones do faster measurements, but there is really no good reason -for that. - - -Netburst-based Xeon support ---------------------------- - -Some Xeon processors based on the Netburst (early Pentium 4, from 2001 to -2003) microarchitecture had real MAX1617, ADM1021, or compatible chips -within them, with two temperature sensors. Other Xeon processors of this -era (with 400 MHz FSB) had chips with only one temperature sensor. - -If you have such an old Xeon, and you get two valid temperatures when -loading the adm1021 module, then things are good. - -If nothing happens when loading the adm1021 module, and you are certain -that your specific Xeon processor model includes compatible sensors, you -will have to explicitly instantiate the sensor chips from user-space. See -method 4 in Documentation/i2c/instantiating-devices.rst. Possible slave -addresses are 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e. It is likely that -only temp2 will be correct and temp1 will have to be ignored. - -Previous generations of the Xeon processor (based on Pentium II/III) -didn't have these sensors. Next generations of Xeon processors (533 MHz -FSB and faster) lost them, until the Core-based generation which -introduced integrated digital thermal sensors. These are supported by -the coretemp driver. diff --git a/Documentation/hwmon/amc6821.rst b/Documentation/hwmon/amc6821.rst index 5ddb2849da90..dbd544cd1160 100644 --- a/Documentation/hwmon/amc6821.rst +++ b/Documentation/hwmon/amc6821.rst @@ -47,13 +47,18 @@ fan1_input ro tachometer speed fan1_min rw " fan1_max rw " fan1_fault ro " -fan1_div rw Fan divisor can be either 2 or 4. +fan1_pulses rw Pulses per revolution can be either 2 or 4. +fan1_target rw Target fan speed, to be used with pwm1_enable + mode 4. pwm1 rw pwm1 pwm1_enable rw regulator mode, 1=open loop, 2=fan controlled by remote temperature, 3=fan controlled by combination of the on-chip temperature and remote-sensor temperature, + 4=fan controlled by target rpm set with + fan1_target attribute. +pwm1_mode rw Fan duty control mode (0=DC, 1=PWM) pwm1_auto_channels_temp ro 1 if pwm_enable==2, 3 if pwm_enable==3 pwm1_auto_point1_pwm ro Hardwired to 0, shared for both temperature channels. diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst index 0bf99ba406dd..ca38922f4ec5 100644 --- a/Documentation/hwmon/asus_ec_sensors.rst +++ b/Documentation/hwmon/asus_ec_sensors.rst @@ -8,6 +8,7 @@ Supported boards: * PRIME X570-PRO * Pro WS X570-ACE * ProArt X570-CREATOR WIFI + * ProArt X670E-CREATOR WIFI * ProArt B550-CREATOR * ROG CROSSHAIR VIII DARK HERO * ROG CROSSHAIR VIII HERO (WI-FI) diff --git a/Documentation/hwmon/corsair-cpro.rst b/Documentation/hwmon/corsair-cpro.rst index 751f95476b57..15077203a2f8 100644 --- a/Documentation/hwmon/corsair-cpro.rst +++ b/Documentation/hwmon/corsair-cpro.rst @@ -39,3 +39,11 @@ fan[1-6]_target Sets fan speed target rpm. pwm[1-6] Sets the fan speed. Values from 0-255. Can only be read if pwm was set directly. ======================= ===================================================================== + +Debugfs entries +--------------- + +======================= =================== +firmware_version Firmware version +bootloader_version Bootloader version +======================= =================== diff --git a/Documentation/hwmon/corsair-psu.rst b/Documentation/hwmon/corsair-psu.rst index 16db34d464dd..7ed794087f84 100644 --- a/Documentation/hwmon/corsair-psu.rst +++ b/Documentation/hwmon/corsair-psu.rst @@ -15,11 +15,11 @@ Supported devices: Corsair HX850i - Corsair HX1000i (Series 2022 and 2023) + Corsair HX1000i (Legacy and Series 2023) - Corsair HX1200i + Corsair HX1200i (Legacy and Series 2023) - Corsair HX1500i (Series 2022 and 2023) + Corsair HX1500i (Legacy and Series 2023) Corsair RM550i diff --git a/Documentation/hwmon/dell-smm-hwmon.rst b/Documentation/hwmon/dell-smm-hwmon.rst index 977263cb57a8..74905675d71f 100644 --- a/Documentation/hwmon/dell-smm-hwmon.rst +++ b/Documentation/hwmon/dell-smm-hwmon.rst @@ -360,6 +360,8 @@ Firmware Bug Affected Machines ======================================================= ================= Reading of fan states return spurious errors. Precision 490 + OptiPlex 7060 + Reading of fan types causes erratic fan behaviour. Studio XPS 8000 Studio XPS 8100 diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 342ea5deba24..913c11390a45 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -25,7 +25,6 @@ Hardware Monitoring Kernel Drivers acpi_power_meter ad7314 adc128d818 - adm1021 adm1025 adm1026 adm1031 @@ -155,7 +154,6 @@ Hardware Monitoring Kernel Drivers max34440 max6620 max6639 - max6642 max6650 max6697 max8688 @@ -166,9 +164,13 @@ Hardware Monitoring Kernel Drivers mlxreg-fan mp2856 mp2888 + mp2891 mp2975 + mp2993 mp5023 + mp5920 mp5990 + mp9941 mpq8785 nct6683 nct6775 @@ -216,6 +218,7 @@ Hardware Monitoring Kernel Drivers smsc47m192 smsc47m1 sparx5-temp + spd5118 stpddc60 surface_fan sy7636a-hwmon diff --git a/Documentation/hwmon/max31827.rst b/Documentation/hwmon/max31827.rst index 44ab9dc064cb..9c11a9518c67 100644 --- a/Documentation/hwmon/max31827.rst +++ b/Documentation/hwmon/max31827.rst @@ -131,7 +131,14 @@ The Fault Queue bits select how many consecutive temperature faults must occur before overtemperature or undertemperature faults are indicated in the corresponding status bits. -Notes ------ +PEC Support +----------- + +When reading a register value, the PEC byte is computed and sent by the chip. + +PEC on word data transaction respresents a signifcant increase in bandwitdh +usage (+33% for both write and reads) in normal conditions. -PEC is not implemented. +Since this operation implies there will be an extra delay to each +transaction, PEC can be disabled or enabled through sysfs. +Just write 1 to the "pec" file for enabling PEC and 0 for disabling it. diff --git a/Documentation/hwmon/max6642.rst b/Documentation/hwmon/max6642.rst deleted file mode 100644 index 7e5b7d4f9492..000000000000 --- a/Documentation/hwmon/max6642.rst +++ /dev/null @@ -1,27 +0,0 @@ -Kernel driver max6642 -===================== - -Supported chips: - - * Maxim MAX6642 - - Prefix: 'max6642' - - Addresses scanned: I2C 0x48-0x4f - - Datasheet: Publicly available at the Maxim website - - http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf - -Authors: - - Per Dalen <per.dalen@appeartv.com> - -Description ------------ - -The MAX6642 is a digital temperature sensor. It senses its own temperature as -well as the temperature on one external diode. - -All temperature values are given in degrees Celsius. Resolution -is 0.25 degree for the local temperature and for the remote temperature. diff --git a/Documentation/hwmon/mp2891.rst b/Documentation/hwmon/mp2891.rst new file mode 100644 index 000000000000..55944d1b5457 --- /dev/null +++ b/Documentation/hwmon/mp2891.rst @@ -0,0 +1,179 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp2891 +==================== + +Supported chips: + + * MPS mp2891 + + Prefix: 'mp2891' + + * Datasheet + + Publicly available at the MPS website : https://www.monolithicpower.com/en/mp2891.html + +Author: + + Noah Wang <noahwang.wang@outlook.com> + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +MP2891 Multi-phase Digital VR Controller. + +Device compliant with: + +- PMBus rev 1.3 interface. + +Device supports direct and linear format for reading input voltage, +output voltage, input current, output current, input power, output +power, and temperature. + +The driver exports the following attributes via the 'sysfs' files +for input voltage: + +**in1_input** + +**in1_label** + +**in1_crit** + +**in1_crit_alarm** + +**in1_lcrit** + +**in1_lcrit_alarm** + +**in1_min** + +**in1_min_alarm** + +The driver provides the following attributes for output voltage: + +**in2_input** + +**in2_label** + +**in2_crit** + +**in2_crit_alarm** + +**in2_lcrit** + +**in2_lcrit_alarm** + +**in2_min** + +**in2_min_alarm** + +**in3_input** + +**in3_label** + +**in3_crit** + +**in3_crit_alarm** + +**in3_lcrit** + +**in3_lcrit_alarm** + +**in3_min** + +**in3_min_alarm** + +The driver provides the following attributes for input current: + +**curr1_input** + +**curr1_label** + +**curr1_max** + +**curr1_max_alarm** + +**curr2_input** + +**curr2_label** + +**curr2_max** + +**curr2_max_alarm** + +The driver provides the following attributes for output current: + +**curr3_input** + +**curr3_label** + +**curr3_crit** + +**curr3_crit_alarm** + +**curr3_max** + +**curr3_max_alarm** + +**curr4_input** + +**curr4_label** + +**curr4_crit** + +**curr4_crit_alarm** + +**curr4_max** + +**curr4_max_alarm** + +The driver provides the following attributes for input power: + +**power1_input** + +**power1_label** + +**power1_max** + +**power1_alarm** + +**power2_input** + +**power2_label** + +**power2_max** + +**power2_alarm** + +The driver provides the following attributes for output power: + +**power3_input** + +**power3_label** + +**power4_input** + +**power4_label** + +The driver provides the following attributes for temperature: + +**temp1_input** + +**temp1_crit** + +**temp1_crit_alarm** + +**temp1_max** + +**temp1_max_alarm** + +**temp2_input** + +**temp2_crit** + +**temp2_crit_alarm** + +**temp2_max** + +**temp2_max_alarm** diff --git a/Documentation/hwmon/mp2993.rst b/Documentation/hwmon/mp2993.rst new file mode 100644 index 000000000000..7a4fe0d946e0 --- /dev/null +++ b/Documentation/hwmon/mp2993.rst @@ -0,0 +1,150 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp2993 +==================== + +Supported chips: + + * MPS mp2993 + + Prefix: 'mp2993' + + * Datasheet + https://scnbwymvp-my.sharepoint.com/:f:/g/personal/admin_scnbwy_com/Eth4kX1_J1hMsaASHiOYL4QBHU5a75r-tRfLKbHnJFdKLQ?e=vxj3DF + +Author: + + Noah Wang <noahwang.wang@outlook.com> + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +MP2993 Dual Loop Digital Multi-phase Controller. + +Device compliant with: + +- PMBus rev 1.3 interface. + +The driver exports the following attributes via the 'sysfs' files +for input voltage: + +**in1_input** + +**in1_label** + +**in1_crit** + +**in1_crit_alarm** + +**in1_lcrit** + +**in1_lcrit_alarm** + +**in1_max** + +**in1_max_alarm** + +**in1_min** + +**in1_min_alarm** + +The driver provides the following attributes for output voltage: + +**in2_input** + +**in2_label** + +**in2_crit** + +**in2_crit_alarm** + +**in2_lcrit** + +**in2_lcrit_alarm** + +**in3_input** + +**in3_label** + +**in3_crit** + +**in3_crit_alarm** + +**in3_lcrit** + +**in3_lcrit_alarm** + +The driver provides the following attributes for input current: + +**curr1_input** + +**curr1_label** + +**curr1_max** + +**curr1_max_alarm** + +The driver provides the following attributes for output current: + +**curr2_input** + +**curr2_label** + +**curr2_crit** + +**curr2_crit_alarm** + +**curr2_max** + +**curr2_max_alarm** + +**curr3_input** + +**curr3_label** + +**curr3_crit** + +**curr3_crit_alarm** + +**curr3_max** + +**curr3_max_alarm** + +The driver provides the following attributes for input power: + +**power1_input** + +**power1_label** + +The driver provides the following attributes for output power: + +**power2_input** + +**power2_label** + +**power3_input** + +**power3_label** + +The driver provides the following attributes for temperature: + +**temp1_input** + +**temp1_crit** + +**temp1_crit_alarm** + +**temp1_max** + +**temp1_max_alarm** + +**temp2_input** + +**temp2_crit** + +**temp2_crit_alarm** + +**temp2_max** + +**temp2_max_alarm** diff --git a/Documentation/hwmon/mp5920.rst b/Documentation/hwmon/mp5920.rst new file mode 100644 index 000000000000..98946e7cf54e --- /dev/null +++ b/Documentation/hwmon/mp5920.rst @@ -0,0 +1,91 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp5920 +==================== + +Supported chips: + + * MPS MP5920 + + Prefix: 'mp5920' + + * Datasheet + + Publicly available at the MPS website : https://www.monolithicpower.com/en/mp5920.html + +Authors: + + Tony Ao <tony_ao@wiwynn.com> + Alex Vdovydchenko <xzeol@yahoo.com> + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +MP5920 Hot-Swap Controller. + +Device compliant with: + +- PMBus rev 1.3 interface. + +Device supports direct and linear format for reading input voltage, +output voltage, output current, input power and temperature. + +The driver exports the following attributes via the 'sysfs' files +for input voltage: + +**in1_input** + +**in1_label** + +**in1_rated_max** + +**in1_rated_min** + +**in1_crit** + +**in1_alarm** + +The driver provides the following attributes for output voltage: + +**in2_input** + +**in2_label** + +**in2_rated_max** + +**in2_rated_min** + +**in2_alarm** + +The driver provides the following attributes for output current: + +**curr1_input** + +**curr1_label** + +**curr1_crit** + +**curr1_alarm** + +**curr1_rated_max** + +The driver provides the following attributes for input power: + +**power1_input** + +**power1_label** + +**power1_max** + +**power1_rated_max** + +The driver provides the following attributes for temperature: + +**temp1_input** + +**temp1_max** + +**temp1_crit** + +**temp1_alarm** diff --git a/Documentation/hwmon/mp9941.rst b/Documentation/hwmon/mp9941.rst new file mode 100644 index 000000000000..1274fa20e256 --- /dev/null +++ b/Documentation/hwmon/mp9941.rst @@ -0,0 +1,92 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp9941 +==================== + +Supported chips: + + * MPS mp9941 + + Prefix: 'mp9941' + + * Datasheet + https://scnbwymvp-my.sharepoint.com/:f:/g/personal/admin_scnbwy_com/Eth4kX1_J1hMsaASHiOYL4QBHU5a75r-tRfLKbHnJFdKLQ?e=vxj3DF + +Author: + + Noah Wang <noahwang.wang@outlook.com> + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +MP9941 digital step-down converter. + +Device compliant with: + +- PMBus rev 1.3 interface. + +The driver exports the following attributes via the 'sysfs' files +for input voltage: + +**in1_input** + +**in1_label** + +**in1_crit** + +**in1_crit_alarm** + +The driver provides the following attributes for output voltage: + +**in2_input** + +**in2_label** + +**in2_lcrit** + +**in2_lcrit_alarm** + +**in2_rated_max** + +**in2_rated_min** + +The driver provides the following attributes for input current: + +**curr1_input** + +**curr1_label** + +**curr1_max** + +**curr1_max_alarm** + +The driver provides the following attributes for output current: + +**curr2_input** + +**curr2_label** + +The driver provides the following attributes for input power: + +**power1_input** + +**power1_label** + +The driver provides the following attributes for output power: + +**power2_input** + +**power2_label** + +The driver provides the following attributes for temperature: + +**temp1_input** + +**temp1_crit** + +**temp1_crit_alarm** + +**temp1_max** + +**temp1_max_alarm** diff --git a/Documentation/hwmon/spd5118.rst b/Documentation/hwmon/spd5118.rst new file mode 100644 index 000000000000..ef7338f46575 --- /dev/null +++ b/Documentation/hwmon/spd5118.rst @@ -0,0 +1,63 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver spd5118 +===================== + +Supported chips: + + * SPD5118 (JEDEC JESD300) compliant temperature sensor chips + + JEDEC standard download: + https://www.jedec.org/standards-documents/docs/jesd300-5b01 + (account required) + + + Prefix: 'spd5118' + + Addresses scanned: I2C 0x50 - 0x57 + +Author: + Guenter Roeck <linux@roeck-us.net> + + +Description +----------- + +This driver implements support for SPD5118 (JEDEC JESD300) compliant temperature +sensors, which are used on many DDR5 memory modules. Some systems use the sensor +to prevent memory overheating by automatically throttling the memory controller. + +The driver auto-detects SPD5118 compliant chips, but can also be instantiated +using devicetree/firmware nodes. + +A SPD5118 compliant chip supports a single temperature sensor. Critical minimum, +minimum, maximum, and critical temperature can be configured. There are alarms +for low critical, low, high, and critical thresholds. + + +Hardware monitoring sysfs entries +--------------------------------- + +======================= ================================== +temp1_input Temperature (RO) +temp1_lcrit Low critical high temperature (RW) +temp1_min Minimum temperature (RW) +temp1_max Maximum temperature (RW) +temp1_crit Critical high temperature (RW) + +temp1_lcrit_alarm Temperature low critical alarm +temp1_min_alarm Temperature low alarm +temp1_max_alarm Temperature high alarm +temp1_crit_alarm Temperature critical alarm +======================= ================================== + +Alarm attributes are sticky until read and will be cleared afterwards +unless the alarm condition still applies. + + +SPD (Serial Presence Detect) support +------------------------------------ + +The driver also supports reading the SPD NVRAM on SPD5118 compatible chips. +SPD data is available from the 'eeprom' binary attribute file attached to the +chip's I2C device. diff --git a/MAINTAINERS b/MAINTAINERS index b7a84b2b4422..8553b51efb0d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15265,6 +15265,27 @@ S: Maintained F: Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml F: drivers/video/backlight/mp3309c.c +MPS MP2891 DRIVER +M: Noah Wang <noahwang.wang@outlook.com> +L: linux-hwmon@vger.kernel.org +S: Maintained +F: Documentation/hwmon/mp2891.rst +F: drivers/hwmon/pmbus/mp2891.c + +MPS MP2993 DRIVER +M: Noah Wang <noahwang.wang@outlook.com> +L: linux-hwmon@vger.kernel.org +S: Maintained +F: Documentation/hwmon/mp2993.rst +F: drivers/hwmon/pmbus/mp2993.c + +MPS MP9941 DRIVER +M: Noah Wang <noahwang.wang@outlook.com> +L: linux-hwmon@vger.kernel.org +S: Maintained +F: Documentation/hwmon/mp9941.rst +F: drivers/hwmon/pmbus/mp9941.c + MR800 AVERMEDIA USB FM RADIO DRIVER M: Alexey Klimov <klimov.linux@gmail.com> L: linux-media@vger.kernel.org diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 702dc45ea405..b60fe2e58ad6 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -105,18 +105,6 @@ config SENSORS_AD7418 This driver can also be built as a module. If so, the module will be called ad7418. -config SENSORS_ADM1021 - tristate "Analog Devices ADM1021 and compatibles" - depends on I2C - depends on SENSORS_LM90=n - help - If you say yes here you get support for Analog Devices ADM1021 - and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, - Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. - - This driver can also be built as a module. If so, the module - will be called adm1021. - config SENSORS_ADM1025 tristate "Analog Devices ADM1025 and compatibles" depends on I2C @@ -1252,18 +1240,6 @@ config SENSORS_MAX6639 This driver can also be built as a module. If so, the module will be called max6639. -config SENSORS_MAX6642 - tristate "Maxim MAX6642 sensor chip" - depends on I2C - depends on SENSORS_LM90=n - help - If you say yes here you get support for MAX6642 sensor chip. - MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor - with Overtemperature Alarm from Maxim. - - This driver can also be built as a module. If so, the module - will be called max6642. - config SENSORS_MAX6650 tristate "Maxim MAX6650 sensor chip" depends on I2C @@ -2138,6 +2114,7 @@ config SENSORS_ADS7871 config SENSORS_AMC6821 tristate "Texas Instruments AMC6821" depends on I2C + select REGMAP_I2C help If you say yes here you get support for the Texas Instruments AMC6821 hardware monitoring chips. @@ -2192,6 +2169,37 @@ config SENSORS_INA3221 This driver can also be built as a module. If so, the module will be called ina3221. +config SENSORS_SPD5118 + tristate "SPD5118 Compliant Temperature Sensors" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for SPD5118 (JEDEC JESD300) + compliant temperature sensors. Such sensors are found on DDR5 memory + modules. + + This driver can also be built as a module. If so, the module + will be called spd5118. + +config SENSORS_SPD5118_DETECT + bool "Enable detect function" + depends on SENSORS_SPD5118 + default (!DMI || !X86) + help + If enabled, the driver auto-detects if a chip in the SPD address + range is compliant to the SPD51888 standard and auto-instantiates + if that is the case. If disabled, SPD5118 compliant devices have + to be instantiated by other means. On X86 systems with DMI support + this will typically be done from DMI DDR detection code in the + I2C SMBus subsystem. Devicetree based systems will instantiate + attached devices if the DIMMs are listed in the devicetree file. + + Disabling the detect function will speed up boot time and reduce + the risk of mis-detecting SPD5118 compliant devices. However, it + may result in missed DIMMs under some circumstances. + + If unsure, say Y. + config SENSORS_TC74 tristate "Microchip TC74" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 4fb14dd1eafd..b1c7056c37db 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -31,7 +31,6 @@ obj-$(CONFIG_SENSORS_AD7414) += ad7414.o obj-$(CONFIG_SENSORS_AD7418) += ad7418.o obj-$(CONFIG_SENSORS_ADC128D818) += adc128d818.o obj-$(CONFIG_SENSORS_ADCXX) += adcxx.o -obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o @@ -155,7 +154,6 @@ obj-$(CONFIG_SENSORS_MAX31760) += max31760.o obj-$(CONFIG_SENSORS_MAX6620) += max6620.o obj-$(CONFIG_SENSORS_MAX6621) += max6621.o obj-$(CONFIG_SENSORS_MAX6639) += max6639.o -obj-$(CONFIG_SENSORS_MAX6642) += max6642.o obj-$(CONFIG_SENSORS_MAX6650) += max6650.o obj-$(CONFIG_SENSORS_MAX6697) += max6697.o obj-$(CONFIG_SENSORS_MAX31790) += max31790.o @@ -208,6 +206,7 @@ obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o obj-$(CONFIG_SENSORS_SPARX5) += sparx5-temp.o +obj-$(CONFIG_SENSORS_SPD5118) += spd5118.o obj-$(CONFIG_SENSORS_STTS751) += stts751.o obj-$(CONFIG_SENSORS_SURFACE_FAN)+= surface_fan.o obj-$(CONFIG_SENSORS_SY7636A) += sy7636a-hwmon.o diff --git a/drivers/hwmon/ad7418.c b/drivers/hwmon/ad7418.c index 4829f83ff52e..7a132accdf8a 100644 --- a/drivers/hwmon/ad7418.c +++ b/drivers/hwmon/ad7418.c @@ -230,8 +230,6 @@ static void ad7418_init_client(struct i2c_client *client) } } -static const struct i2c_device_id ad7418_id[]; - static int ad7418_probe(struct i2c_client *client) { struct device *dev = &client->dev; @@ -252,10 +250,7 @@ static int ad7418_probe(struct i2c_client *client) mutex_init(&data->lock); data->client = client; - if (dev->of_node) - data->type = (uintptr_t)of_device_get_match_data(dev); - else - data->type = i2c_match_id(ad7418_id, client)->driver_data; + data->type = (uintptr_t)i2c_get_match_data(client); switch (data->type) { case ad7416: diff --git a/drivers/hwmon/adc128d818.c b/drivers/hwmon/adc128d818.c index 8ac6e735ec5c..5e805d4ee76a 100644 --- a/drivers/hwmon/adc128d818.c +++ b/drivers/hwmon/adc128d818.c @@ -175,7 +175,7 @@ static ssize_t adc128_in_store(struct device *dev, mutex_lock(&data->update_lock); /* 10 mV LSB on limit registers */ - regval = clamp_val(DIV_ROUND_CLOSEST(val, 10), 0, 255); + regval = DIV_ROUND_CLOSEST(clamp_val(val, 0, 2550), 10); data->in[index][nr] = regval << 4; reg = index == 1 ? ADC128_REG_IN_MIN(nr) : ADC128_REG_IN_MAX(nr); i2c_smbus_write_byte_data(data->client, reg, regval); @@ -213,7 +213,7 @@ static ssize_t adc128_temp_store(struct device *dev, return err; mutex_lock(&data->update_lock); - regval = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -128, 127); + regval = DIV_ROUND_CLOSEST(clamp_val(val, -128000, 127000), 1000); data->temp[index] = regval << 1; i2c_smbus_write_byte_data(data->client, index == 1 ? ADC128_REG_TEMP_MAX diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c deleted file mode 100644 index 7c15398ebb37..000000000000 --- a/drivers/hwmon/adm1021.c +++ /dev/null @@ -1,505 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * adm1021.c - Part of lm_sensors, Linux kernel modules for hardware - * monitoring - * Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and - * Philip Edelbrock <phil@netroedge.com> - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/hwmon.h> -#include <linux/hwmon-sysfs.h> -#include <linux/err.h> -#include <linux/mutex.h> - - -/* Addresses to scan */ -static const unsigned short normal_i2c[] = { - 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; - -enum chips { - adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066 }; - -/* adm1021 constants specified below */ - -/* The adm1021 registers */ -/* Read-only */ -/* For nr in 0-1 */ -#define ADM1021_REG_TEMP(nr) (nr) -#define ADM1021_REG_STATUS 0x02 -/* 0x41 = AD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi */ -#define ADM1021_REG_MAN_ID 0xFE -/* ADM1021 = 0x0X, ADM1023 = 0x3X */ -#define ADM1021_REG_DEV_ID 0xFF -/* These use different addresses for reading/writing */ -#define ADM1021_REG_CONFIG_R 0x03 -#define ADM1021_REG_CONFIG_W 0x09 -#define ADM1021_REG_CONV_RATE_R 0x04 -#define ADM1021_REG_CONV_RATE_W 0x0A -/* These are for the ADM1023's additional precision on the remote temp sensor */ -#define ADM1023_REG_REM_TEMP_PREC 0x10 -#define ADM1023_REG_REM_OFFSET 0x11 -#define ADM1023_REG_REM_OFFSET_PREC 0x12 -#define ADM1023_REG_REM_TOS_PREC 0x13 -#define ADM1023_REG_REM_THYST_PREC 0x14 -/* limits */ -/* For nr in 0-1 */ -#define ADM1021_REG_TOS_R(nr) (0x05 + 2 * (nr)) -#define ADM1021_REG_TOS_W(nr) (0x0B + 2 * (nr)) -#define ADM1021_REG_THYST_R(nr) (0x06 + 2 * (nr)) -#define ADM1021_REG_THYST_W(nr) (0x0C + 2 * (nr)) -/* write-only */ -#define ADM1021_REG_ONESHOT 0x0F - -/* Initial values */ - -/* - * Note: Even though I left the low and high limits named os and hyst, - * they don't quite work like a thermostat the way the LM75 does. I.e., - * a lower temp than THYST actually triggers an alarm instead of - * clearing it. Weird, ey? --Phil - */ - -/* Each client has this additional data */ -struct adm1021_data { - struct i2c_client *client; - enum chips type; - - const struct attribute_group *groups[3]; - - struct mutex update_lock; - bool valid; /* true if following fields are valid */ - char low_power; /* !=0 if device in low power mode */ - unsigned long last_updated; /* In jiffies */ - - int temp_max[2]; /* Register values */ - int temp_min[2]; - int temp[2]; - u8 alarms; - /* Special values for ADM1023 only */ - u8 remote_temp_offset; - u8 remote_temp_offset_prec; -}; - -/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */ -static bool read_only; - -static struct adm1021_data *adm1021_update_device(struct device *dev) -{ - struct adm1021_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - - mutex_lock(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - int i; - - dev_dbg(dev, "Starting adm1021 update\n"); - - for (i = 0; i < 2; i++) { - data->temp[i] = 1000 * - (s8) i2c_smbus_read_byte_data( - client, ADM1021_REG_TEMP(i)); - data->temp_max[i] = 1000 * - (s8) i2c_smbus_read_byte_data( - client, ADM1021_REG_TOS_R(i)); - if (data->type != lm84) { - data->temp_min[i] = 1000 * - (s8) i2c_smbus_read_byte_data(client, - ADM1021_REG_THYST_R(i)); - } - } - data->alarms = i2c_smbus_read_byte_data(client, - ADM1021_REG_STATUS) & 0x7c; - if (data->type == adm1023) { - /* - * The ADM1023 provides 3 extra bits of precision for - * the remote sensor in extra registers. - */ - data->temp[1] += 125 * (i2c_smbus_read_byte_data( - client, ADM1023_REG_REM_TEMP_PREC) >> 5); - data->temp_max[1] += 125 * (i2c_smbus_read_byte_data( - client, ADM1023_REG_REM_TOS_PREC) >> 5); - data->temp_min[1] += 125 * (i2c_smbus_read_byte_data( - client, ADM1023_REG_REM_THYST_PREC) >> 5); - data->remote_temp_offset = - i2c_smbus_read_byte_data(client, - ADM1023_REG_REM_OFFSET); - data->remote_temp_offset_prec = - i2c_smbus_read_byte_data(client, - ADM1023_REG_REM_OFFSET_PREC); - } - data->last_updated = jiffies; - data->valid = true; - } - - mutex_unlock(&data->update_lock); - - return data; -} - -static ssize_t temp_show(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - int index = to_sensor_dev_attr(devattr)->index; - struct adm1021_data *data = adm1021_update_device(dev); - - return sprintf(buf, "%d\n", data->temp[index]); -} - -static ssize_t temp_max_show(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - int index = to_sensor_dev_attr(devattr)->index; - struct adm1021_data *data = adm1021_update_device(dev); - - return sprintf(buf, "%d\n", data->temp_max[index]); -} - -static ssize_t temp_min_show(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - int index = to_sensor_dev_attr(devattr)->index; - struct adm1021_data *data = adm1021_update_device(dev); - - return sprintf(buf, "%d\n", data->temp_min[index]); -} - -static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - int index = to_sensor_dev_attr(attr)->index; - struct adm1021_data *data = adm1021_update_device(dev); - return sprintf(buf, "%u\n", (data->alarms >> index) & 1); -} - -static ssize_t alarms_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct adm1021_data *data = adm1021_update_device(dev); - return sprintf(buf, "%u\n", data->alarms); -} - -static ssize_t temp_max_store(struct device *dev, - struct device_attribute *devattr, - const char *buf, size_t count) -{ - int index = to_sensor_dev_attr(devattr)->index; - struct adm1021_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - long temp; - int reg_val, err; - - err = kstrtol(buf, 10, &temp); - if (err) - return err; - temp /= 1000; - - mutex_lock(&data->update_lock); - reg_val = clamp_val(temp, -128, 127); - data->temp_max[index] = reg_val * 1000; - if (!read_only) - i2c_smbus_write_byte_data(client, ADM1021_REG_TOS_W(index), - reg_val); - mutex_unlock(&data->update_lock); - - return count; -} - -static ssize_t temp_min_store(struct device *dev, - struct device_attribute *devattr, - const char *buf, size_t count) -{ - int index = to_sensor_dev_attr(devattr)->index; - struct adm1021_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - long temp; - int reg_val, err; - - err = kstrtol(buf, 10, &temp); - if (err) - return err; - temp /= 1000; - - mutex_lock(&data->update_lock); - reg_val = clamp_val(temp, -128, 127); - data->temp_min[index] = reg_val * 1000; - if (!read_only) - i2c_smbus_write_byte_data(client, ADM1021_REG_THYST_W(index), - reg_val); - mutex_unlock(&data->update_lock); - - return count; -} - -static ssize_t low_power_show(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - struct adm1021_data *data = adm1021_update_device(dev); - return sprintf(buf, "%d\n", data->low_power); -} - -static ssize_t low_power_store(struct device *dev, - struct device_attribute *devattr, - const char *buf, size_t count) -{ - struct adm1021_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - char low_power; - unsigned long val; - int err; - - err = kstrtoul(buf, 10, &val); - if (err) - return err; - low_power = val != 0; - - mutex_lock(&data->update_lock); - if (low_power != data->low_power) { - int config = i2c_smbus_read_byte_data( - client, ADM1021_REG_CONFIG_R); - data->low_power = low_power; - i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W, - (config & 0xBF) | (low_power << 6)); - } - mutex_unlock(&data->update_lock); - - return count; -} - - -static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); -static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0); -static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0); -static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); -static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1); -static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1); -static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 6); -static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, alarm, 5); -static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 4); -static SENSOR_DEVICE_ATTR_RO(temp2_min_alarm, alarm, 3); -static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 2); - -static DEVICE_ATTR_RO(alarms); -static DEVICE_ATTR_RW(low_power); - -static struct attribute *adm1021_attributes[] = { - &sensor_dev_attr_temp1_max.dev_attr.attr, - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp2_max.dev_attr.attr, - &sensor_dev_attr_temp2_input.dev_attr.attr, - &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_fault.dev_attr.attr, - &dev_attr_alarms.attr, - &dev_attr_low_power.attr, - NULL -}; - -static const struct attribute_group adm1021_group = { - .attrs = adm1021_attributes, -}; - -static struct attribute *adm1021_min_attributes[] = { - &sensor_dev_attr_temp1_min.dev_attr.attr, - &sensor_dev_attr_temp2_min.dev_attr.attr, - &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, - NULL -}; - -static const struct attribute_group adm1021_min_group = { - .attrs = adm1021_min_attributes, -}; - -/* Return 0 if detection is successful, -ENODEV otherwise */ -static int adm1021_detect(struct i2c_client *client, - struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = client->adapter; - const char *type_name; - int reg, conv_rate, status, config, man_id, dev_id; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - pr_debug("detect failed, smbus byte data not supported!\n"); - return -ENODEV; - } - - status = i2c_smbus_read_byte_data(client, ADM1021_REG_STATUS); - conv_rate = i2c_smbus_read_byte_data(client, - ADM1021_REG_CONV_RATE_R); - config = i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R); - - /* Check unused bits */ - if ((status & 0x03) || (config & 0x3F) || (conv_rate & 0xF8)) { - pr_debug("detect failed, chip not detected!\n"); - return -ENODEV; - } - - /* Determine the chip type. */ - man_id = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID); - dev_id = i2c_smbus_read_byte_data(client, ADM1021_REG_DEV_ID); - - if (man_id < 0 || dev_id < 0) - return -ENODEV; - - if (man_id == 0x4d && dev_id == 0x01) { - /* - * dev_id 0x01 matches MAX6680, MAX6695, MAX6696, and possibly - * others. Read register which is unsupported on MAX1617 but - * exists on all those chips and compare with the dev_id - * register. If it matches, it may be a MAX1617A. - */ - reg = i2c_smbus_read_byte_data(client, - ADM1023_REG_REM_TEMP_PREC); - if (reg != dev_id) - return -ENODEV; - type_name = "max1617a"; - } else if (man_id == 0x41) { - if ((dev_id & 0xF0) == 0x30) - type_name = "adm1023"; - else if ((dev_id & 0xF0) == 0x00) - type_name = "adm1021"; - else - return -ENODEV; - } else if (man_id == 0x49) - type_name = "thmc10"; - else if (man_id == 0x23) - type_name = "gl523sm"; - else if (man_id == 0x54) - type_name = "mc1066"; - else { - int lte, rte, lhi, rhi, llo, rlo; - - /* extra checks for LM84 and MAX1617 to avoid misdetections */ - - llo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(0)); - rlo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(1)); - - /* fail if any of the additional register reads failed */ - if (llo < 0 || rlo < 0) - return -ENODEV; - - lte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(0)); - rte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(1)); - lhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(0)); - rhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(1)); - - /* - * Fail for negative temperatures and negative high limits. - * This check also catches read errors on the tested registers. - */ - if ((s8)lte < 0 || (s8)rte < 0 || (s8)lhi < 0 || (s8)rhi < 0) - return -ENODEV; - - /* fail if all registers hold the same value */ - if (lte == rte && lte == lhi && lte == rhi && lte == llo - && lte == rlo) - return -ENODEV; - - /* - * LM84 Mfr ID is in a different place, - * and it has more unused bits. Registers at 0xfe and 0xff - * are undefined and return the most recently read value, - * here the value of the configuration register. - */ - if (conv_rate == 0x00 - && man_id == config && dev_id == config - && (config & 0x7F) == 0x00 - && (status & 0xAB) == 0x00) { - type_name = "lm84"; - } else { - if ((config & 0x3f) || (status & 0x03)) - return -ENODEV; - /* fail if low limits are larger than high limits */ - if ((s8)llo > lhi || (s8)rlo > rhi) - return -ENODEV; - type_name = "max1617"; - } - } - - pr_debug("Detected chip %s at adapter %d, address 0x%02x.\n", - type_name, i2c_adapter_id(adapter), client->addr); - strscpy(info->type, type_name, I2C_NAME_SIZE); - - return 0; -} - -static void adm1021_init_client(struct i2c_client *client) -{ - /* Enable ADC and disable suspend mode */ - i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W, - i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R) & 0xBF); - /* Set Conversion rate to 1/sec (this can be tinkered with) */ - i2c_smbus_write_byte_data(client, ADM1021_REG_CONV_RATE_W, 0x04); -} - -static const struct i2c_device_id adm1021_id[]; - -static int adm1021_probe(struct i2c_client *client) -{ - struct device *dev = &client->dev; - struct adm1021_data *data; - struct device *hwmon_dev; - - data = devm_kzalloc(dev, sizeof(struct adm1021_data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->client = client; - data->type = i2c_match_id(adm1021_id, client)->driver_data; - mutex_init(&data->update_lock); - - /* Initialize the ADM1021 chip */ - if (data->type != lm84 && !read_only) - adm1021_init_client(client); - - data->groups[0] = &adm1021_group; - if (data->type != lm84) - data->groups[1] = &adm1021_min_group; - - hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, - data, data->groups); - - return PTR_ERR_OR_ZERO(hwmon_dev); -} - -static const struct i2c_device_id adm1021_id[] = { - { "adm1021", adm1021 }, - { "adm1023", adm1023 }, - { "max1617", max1617 }, - { "max1617a", max1617a }, - { "thmc10", thmc10 }, - { "lm84", lm84 }, - { "gl523sm", gl523sm }, - { "mc1066", mc1066 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, adm1021_id); - -static struct i2c_driver adm1021_driver = { - .class = I2C_CLASS_HWMON, - .driver = { - .name = "adm1021", - }, - .probe = adm1021_probe, - .id_table = adm1021_id, - .detect = adm1021_detect, - .address_list = normal_i2c, -}; - -module_i2c_driver(adm1021_driver); - -MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " - "Philip Edelbrock <phil@netroedge.com>"); -MODULE_DESCRIPTION("adm1021 driver"); -MODULE_LICENSE("GPL"); - -module_param(read_only, bool, 0); -MODULE_PARM_DESC(read_only, "Don't set any values, read only mode"); diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index 88c7e0d62d08..343118532cdb 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -1021,8 +1021,6 @@ static void adm1031_init_client(struct i2c_client *client) data->update_interval = update_intervals[i]; } -static const struct i2c_device_id adm1031_id[]; - static int adm1031_probe(struct i2c_client *client) { struct device *dev = &client->dev; @@ -1035,7 +1033,7 @@ static int adm1031_probe(struct i2c_client *client) i2c_set_clientdata(client, data); data->client = client; - data->chip_type = i2c_match_id(adm1031_id, client)->driver_data; + data->chip_type = (uintptr_t)i2c_get_match_data(client); mutex_init(&data->update_lock); if (data->chip_type == adm1030) diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c index 809e830f52a6..436637264056 100644 --- a/drivers/hwmon/ads7828.c +++ b/drivers/hwmon/ads7828.c @@ -99,8 +99,6 @@ static const struct regmap_config ads2830_regmap_config = { .val_bits = 8, }; -static const struct i2c_device_id ads7828_device_ids[]; - static int ads7828_probe(struct i2c_client *client) { struct device *dev = &client->dev; @@ -138,10 +136,7 @@ static int ads7828_probe(struct i2c_client *client) } } - if (client->dev.of_node) - chip = (uintptr_t)of_device_get_match_data(&client->dev); - else - chip = i2c_match_id(ads7828_device_ids, client)->driver_data; + chip = (uintptr_t)i2c_get_match_data(client); /* Bound Vref with min/max values */ vref_mv = clamp_val(vref_mv, ADS7828_EXT_VREF_MV_MIN, diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index 4224ffb30483..bc186c61a2c0 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -1676,7 +1676,6 @@ static int adt7475_probe(struct i2c_client *client) struct device *hwmon_dev; int i, ret = 0, revision, group_num = 0; u8 config3; - const struct i2c_device_id *id = i2c_match_id(adt7475_id, client); data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); if (data == NULL) @@ -1686,10 +1685,7 @@ static int adt7475_probe(struct i2c_client *client) data->client = client; i2c_set_clientdata(client, data); - if (client->dev.of_node) - chip = (uintptr_t)of_device_get_match_data(&client->dev); - else - chip = id->driver_data; + chip = (uintptr_t)i2c_get_match_data(client); /* Initialize device-specific values */ switch (chip) { @@ -1717,7 +1713,7 @@ static int adt7475_probe(struct i2c_client *client) if (!(config3 & CONFIG3_SMBALERT)) data->has_pwm2 = 1; /* Meaning of this bit is inverted for the ADT7473-1 */ - if (id->driver_data == adt7473 && revision >= 1) + if (chip == adt7473 && revision >= 1) data->has_pwm2 = !data->has_pwm2; data->config4 = adt7475_read(REG_CONFIG4); @@ -1730,12 +1726,12 @@ static int adt7475_probe(struct i2c_client *client) * because 2 different pins (TACH4 and +2.5 Vin) can be used for * this function */ - if (id->driver_data == adt7490) { + if (chip == adt7490) { if ((data->config4 & CONFIG4_PINFUNC) == 0x1 && !(config3 & CONFIG3_THERM)) data->has_fan4 = 1; } - if (id->driver_data == adt7476 || id->driver_data == adt7490) { + if (chip == adt7476 || chip == adt7490) { if (!(config3 & CONFIG3_THERM) || (data->config4 & CONFIG4_PINFUNC) == 0x1) data->has_voltage |= (1 << 0); /* in0 */ @@ -1745,7 +1741,7 @@ static int adt7475_probe(struct i2c_client *client) * On the ADT7476, the +12V input pin may instead be used as VID5, * and VID pins may alternatively be used as GPIO */ - if (id->driver_data == adt7476) { + if (chip == adt7476) { u8 vid = adt7475_read(REG_VID); if (!(vid & VID_VIDSEL)) data->has_voltage |= (1 << 4); /* in4 */ @@ -1829,7 +1825,7 @@ static int adt7475_probe(struct i2c_client *client) } dev_info(&client->dev, "%s device, revision %d\n", - names[id->driver_data], revision); + names[chip], revision); if ((data->has_voltage & 0x11) || data->has_fan4 || data->has_pwm2) dev_info(&client->dev, "Optional features:%s%s%s%s%s\n", (data->has_voltage & (1 << 0)) ? " in0" : "", @@ -1900,7 +1896,7 @@ static void adt7475_read_pwm(struct i2c_client *client, int index) data->pwm[CONTROL][index] &= ~0xE0; data->pwm[CONTROL][index] |= (7 << 5); - i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index), + i2c_smbus_write_byte_data(client, PWM_REG(index), data->pwm[INPUT][index]); i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index), diff --git a/drivers/hwmon/aht10.c b/drivers/hwmon/aht10.c index f136bf3ff40a..312ef3e98754 100644 --- a/drivers/hwmon/aht10.c +++ b/drivers/hwmon/aht10.c @@ -331,8 +331,7 @@ static const struct hwmon_chip_info aht10_chip_info = { static int aht10_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_match_id(aht10_id, client); - enum aht10_variant variant = id->driver_data; + enum aht10_variant variant = (uintptr_t)i2c_get_match_data(client); struct device *device = &client->dev; struct device *hwmon_dev; struct aht10_data *data; diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c index 9b02b304c2f5..ec94392fcb65 100644 --- a/drivers/hwmon/amc6821.c +++ b/drivers/hwmon/amc6821.c @@ -6,18 +6,24 @@ * * Based on max6650.c: * Copyright (C) 2007 Hans J. Koch <hjk@hansjkoch.de> + * + * Conversion to regmap and with_info API: + * Copyright (C) 2024 Guenter Roeck <linux@roeck-us.net> */ -#include <linux/kernel.h> /* Needed for KERN_INFO */ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/bits.h> +#include <linux/err.h> #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> -#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/minmax.h> +#include <linux/module.h> #include <linux/mutex.h> +#include <linux/regmap.h> +#include <linux/slab.h> /* * Addresses to scan. @@ -36,519 +42,594 @@ module_param(pwminv, int, 0444); static int init = 1; /*Power-on initialization.*/ module_param(init, int, 0444); -enum chips { amc6821 }; - -#define AMC6821_REG_DEV_ID 0x3D -#define AMC6821_REG_COMP_ID 0x3E -#define AMC6821_REG_CONF1 0x00 -#define AMC6821_REG_CONF2 0x01 -#define AMC6821_REG_CONF3 0x3F -#define AMC6821_REG_CONF4 0x04 -#define AMC6821_REG_STAT1 0x02 -#define AMC6821_REG_STAT2 0x03 -#define AMC6821_REG_TDATA_LOW 0x08 -#define AMC6821_REG_TDATA_HI 0x09 -#define AMC6821_REG_LTEMP_HI 0x0A -#define AMC6821_REG_RTEMP_HI 0x0B -#define AMC6821_REG_LTEMP_LIMIT_MIN 0x15 -#define AMC6821_REG_LTEMP_LIMIT_MAX 0x14 -#define AMC6821_REG_RTEMP_LIMIT_MIN 0x19 -#define AMC6821_REG_RTEMP_LIMIT_MAX 0x18 -#define AMC6821_REG_LTEMP_CRIT 0x1B -#define AMC6821_REG_RTEMP_CRIT 0x1D -#define AMC6821_REG_PSV_TEMP 0x1C -#define AMC6821_REG_DCY 0x22 -#define AMC6821_REG_LTEMP_FAN_CTRL 0x24 -#define AMC6821_REG_RTEMP_FAN_CTRL 0x25 -#define AMC6821_REG_DCY_LOW_TEMP 0x21 - -#define AMC6821_REG_TACH_LLIMITL 0x10 -#define AMC6821_REG_TACH_LLIMITH 0x11 -#define AMC6821_REG_TACH_HLIMITL 0x12 -#define AMC6821_REG_TACH_HLIMITH 0x13 - -#define AMC6821_CONF1_START 0x01 -#define AMC6821_CONF1_FAN_INT_EN 0x02 -#define AMC6821_CONF1_FANIE 0x04 -#define AMC6821_CONF1_PWMINV 0x08 -#define AMC6821_CONF1_FAN_FAULT_EN 0x10 -#define AMC6821_CONF1_FDRC0 0x20 -#define AMC6821_CONF1_FDRC1 0x40 -#define AMC6821_CONF1_THERMOVIE 0x80 - -#define AMC6821_CONF2_PWM_EN 0x01 -#define AMC6821_CONF2_TACH_MODE 0x02 -#define AMC6821_CONF2_TACH_EN 0x04 -#define AMC6821_CONF2_RTFIE 0x08 -#define AMC6821_CONF2_LTOIE 0x10 -#define AMC6821_CONF2_RTOIE 0x20 -#define AMC6821_CONF2_PSVIE 0x40 -#define AMC6821_CONF2_RST 0x80 - -#define AMC6821_CONF3_THERM_FAN_EN 0x80 -#define AMC6821_CONF3_REV_MASK 0x0F - -#define AMC6821_CONF4_OVREN 0x10 -#define AMC6821_CONF4_TACH_FAST 0x20 -#define AMC6821_CONF4_PSPR 0x40 -#define AMC6821_CONF4_MODE 0x80 - -#define AMC6821_STAT1_RPM_ALARM 0x01 -#define AMC6821_STAT1_FANS 0x02 -#define AMC6821_STAT1_RTH 0x04 -#define AMC6821_STAT1_RTL 0x08 -#define AMC6821_STAT1_R_THERM 0x10 -#define AMC6821_STAT1_RTF 0x20 -#define AMC6821_STAT1_LTH 0x40 -#define AMC6821_STAT1_LTL 0x80 - -#define AMC6821_STAT2_RTC 0x08 -#define AMC6821_STAT2_LTC 0x10 -#define AMC6821_STAT2_LPSV 0x20 -#define AMC6821_STAT2_L_THERM 0x40 -#define AMC6821_STAT2_THERM_IN 0x80 - -enum {IDX_TEMP1_INPUT = 0, IDX_TEMP1_MIN, IDX_TEMP1_MAX, - IDX_TEMP1_CRIT, IDX_TEMP2_INPUT, IDX_TEMP2_MIN, - IDX_TEMP2_MAX, IDX_TEMP2_CRIT, - TEMP_IDX_LEN, }; - -static const u8 temp_reg[] = {AMC6821_REG_LTEMP_HI, - AMC6821_REG_LTEMP_LIMIT_MIN, - AMC6821_REG_LTEMP_LIMIT_MAX, - AMC6821_REG_LTEMP_CRIT, - AMC6821_REG_RTEMP_HI, - AMC6821_REG_RTEMP_LIMIT_MIN, - AMC6821_REG_RTEMP_LIMIT_MAX, - AMC6821_REG_RTEMP_CRIT, }; - -enum {IDX_FAN1_INPUT = 0, IDX_FAN1_MIN, IDX_FAN1_MAX, - FAN1_IDX_LEN, }; - -static const u8 fan_reg_low[] = {AMC6821_REG_TDATA_LOW, - AMC6821_REG_TACH_LLIMITL, - AMC6821_REG_TACH_HLIMITL, }; - - -static const u8 fan_reg_hi[] = {AMC6821_REG_TDATA_HI, - AMC6821_REG_TACH_LLIMITH, - AMC6821_REG_TACH_HLIMITH, }; +#define AMC6821_REG_DEV_ID 0x3D +#define AMC6821_REG_COMP_ID 0x3E +#define AMC6821_REG_CONF1 0x00 +#define AMC6821_REG_CONF2 0x01 +#define AMC6821_REG_CONF3 0x3F +#define AMC6821_REG_CONF4 0x04 +#define AMC6821_REG_STAT1 0x02 +#define AMC6821_REG_STAT2 0x03 +#define AMC6821_REG_TEMP_LO 0x06 +#define AMC6821_REG_TDATA_LOW 0x08 +#define AMC6821_REG_TDATA_HI 0x09 +#define AMC6821_REG_LTEMP_HI 0x0A +#define AMC6821_REG_RTEMP_HI 0x0B +#define AMC6821_REG_LTEMP_LIMIT_MIN 0x15 +#define AMC6821_REG_LTEMP_LIMIT_MAX 0x14 +#define AMC6821_REG_RTEMP_LIMIT_MIN 0x19 +#define AMC6821_REG_RTEMP_LIMIT_MAX 0x18 +#define AMC6821_REG_LTEMP_CRIT 0x1B +#define AMC6821_REG_RTEMP_CRIT 0x1D +#define AMC6821_REG_PSV_TEMP 0x1C +#define AMC6821_REG_DCY 0x22 +#define AMC6821_REG_LTEMP_FAN_CTRL 0x24 +#define AMC6821_REG_RTEMP_FAN_CTRL 0x25 +#define AMC6821_REG_DCY_LOW_TEMP 0x21 + +#define AMC6821_REG_TACH_LLIMITL 0x10 +#define AMC6821_REG_TACH_HLIMITL 0x12 +#define AMC6821_REG_TACH_SETTINGL 0x1e + +#define AMC6821_CONF1_START BIT(0) +#define AMC6821_CONF1_FAN_INT_EN BIT(1) +#define AMC6821_CONF1_FANIE BIT(2) +#define AMC6821_CONF1_PWMINV BIT(3) +#define AMC6821_CONF1_FAN_FAULT_EN BIT(4) +#define AMC6821_CONF1_FDRC0 BIT(5) +#define AMC6821_CONF1_FDRC1 BIT(6) +#define AMC6821_CONF1_THERMOVIE BIT(7) + +#define AMC6821_CONF2_PWM_EN BIT(0) +#define AMC6821_CONF2_TACH_MODE BIT(1) +#define AMC6821_CONF2_TACH_EN BIT(2) +#define AMC6821_CONF2_RTFIE BIT(3) +#define AMC6821_CONF2_LTOIE BIT(4) +#define AMC6821_CONF2_RTOIE BIT(5) +#define AMC6821_CONF2_PSVIE BIT(6) +#define AMC6821_CONF2_RST BIT(7) + +#define AMC6821_CONF3_THERM_FAN_EN BIT(7) +#define AMC6821_CONF3_REV_MASK GENMASK(3, 0) + +#define AMC6821_CONF4_OVREN BIT(4) +#define AMC6821_CONF4_TACH_FAST BIT(5) +#define AMC6821_CONF4_PSPR BIT(6) +#define AMC6821_CONF4_MODE BIT(7) + +#define AMC6821_STAT1_RPM_ALARM BIT(0) +#define AMC6821_STAT1_FANS BIT(1) +#define AMC6821_STAT1_RTH BIT(2) +#define AMC6821_STAT1_RTL BIT(3) +#define AMC6821_STAT1_R_THERM BIT(4) +#define AMC6821_STAT1_RTF BIT(5) +#define AMC6821_STAT1_LTH BIT(6) +#define AMC6821_STAT1_LTL BIT(7) + +#define AMC6821_STAT2_RTC BIT(3) +#define AMC6821_STAT2_LTC BIT(4) +#define AMC6821_STAT2_LPSV BIT(5) +#define AMC6821_STAT2_L_THERM BIT(6) +#define AMC6821_STAT2_THERM_IN BIT(7) + +#define AMC6821_TEMP_SLOPE_MASK GENMASK(2, 0) +#define AMC6821_TEMP_LIMIT_MASK GENMASK(7, 3) /* * Client data (each client gets its own) */ struct amc6821_data { - struct i2c_client *client; + struct regmap *regmap; struct mutex update_lock; - bool valid; /* false until following fields are valid */ - unsigned long last_updated; /* in jiffies */ +}; - /* register values */ - int temp[TEMP_IDX_LEN]; +/* + * Return 0 on success or negative error code. + * + * temps returns set of three temperatures, in °C: + * temps[0]: Passive cooling temperature, applies to both channels + * temps[1]: Low temperature, start slope calculations + * temps[2]: High temperature + * + * Channel 0: local, channel 1: remote. + */ +static int amc6821_get_auto_point_temps(struct regmap *regmap, int channel, u8 *temps) +{ + u32 pwm, regval; + int err; - u16 fan[FAN1_IDX_LEN]; - u8 fan1_div; + err = regmap_read(regmap, AMC6821_REG_DCY_LOW_TEMP, &pwm); + if (err) + return err; - u8 pwm1; - u8 temp1_auto_point_temp[3]; - u8 temp2_auto_point_temp[3]; - u8 pwm1_auto_point_pwm[3]; - u8 pwm1_enable; - u8 pwm1_auto_channels_temp; + err = regmap_read(regmap, AMC6821_REG_PSV_TEMP, ®val); + if (err) + return err; + temps[0] = regval; - u8 stat1; - u8 stat2; -}; + err = regmap_read(regmap, + channel ? AMC6821_REG_RTEMP_FAN_CTRL : AMC6821_REG_LTEMP_FAN_CTRL, + ®val); + if (err) + return err; + temps[1] = FIELD_GET(AMC6821_TEMP_LIMIT_MASK, regval) * 4; + + /* slope is 32 >> <slope bits> in °C */ + regval = 32 >> FIELD_GET(AMC6821_TEMP_SLOPE_MASK, regval); + if (regval) + temps[2] = temps[1] + DIV_ROUND_CLOSEST(255 - pwm, regval); + else + temps[2] = 255; + + return 0; +} -static struct amc6821_data *amc6821_update_device(struct device *dev) +static int amc6821_temp_read_values(struct regmap *regmap, u32 attr, int channel, long *val) { - struct amc6821_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - int timeout = HZ; - u8 reg; - int i; + int reg, err; + u32 regval; - mutex_lock(&data->update_lock); + switch (attr) { + case hwmon_temp_input: + reg = channel ? AMC6821_REG_RTEMP_HI : AMC6821_REG_LTEMP_HI; + break; + case hwmon_temp_min: + reg = channel ? AMC6821_REG_RTEMP_LIMIT_MIN : AMC6821_REG_LTEMP_LIMIT_MIN; + break; + case hwmon_temp_max: + reg = channel ? AMC6821_REG_RTEMP_LIMIT_MAX : AMC6821_REG_LTEMP_LIMIT_MAX; + break; + case hwmon_temp_crit: + reg = channel ? AMC6821_REG_RTEMP_CRIT : AMC6821_REG_LTEMP_CRIT; + break; + default: + return -EOPNOTSUPP; + } + err = regmap_read(regmap, reg, ®val); + if (err) + return err; + *val = sign_extend32(regval, 7) * 1000; + return 0; +} - if (time_after(jiffies, data->last_updated + timeout) || - !data->valid) { - - for (i = 0; i < TEMP_IDX_LEN; i++) - data->temp[i] = (int8_t)i2c_smbus_read_byte_data( - client, temp_reg[i]); - - data->stat1 = i2c_smbus_read_byte_data(client, - AMC6821_REG_STAT1); - data->stat2 = i2c_smbus_read_byte_data(client, - AMC6821_REG_STAT2); - - data->pwm1 = i2c_smbus_read_byte_data(client, - AMC6821_REG_DCY); - for (i = 0; i < FAN1_IDX_LEN; i++) { - data->fan[i] = i2c_smbus_read_byte_data( - client, - fan_reg_low[i]); - data->fan[i] += i2c_smbus_read_byte_data( - client, - fan_reg_hi[i]) << 8; - } - data->fan1_div = i2c_smbus_read_byte_data(client, - AMC6821_REG_CONF4); - data->fan1_div = data->fan1_div & AMC6821_CONF4_PSPR ? 4 : 2; - - data->pwm1_auto_point_pwm[0] = 0; - data->pwm1_auto_point_pwm[2] = 255; - data->pwm1_auto_point_pwm[1] = i2c_smbus_read_byte_data(client, - AMC6821_REG_DCY_LOW_TEMP); - - data->temp1_auto_point_temp[0] = - i2c_smbus_read_byte_data(client, - AMC6821_REG_PSV_TEMP); - data->temp2_auto_point_temp[0] = - data->temp1_auto_point_temp[0]; - reg = i2c_smbus_read_byte_data(client, - AMC6821_REG_LTEMP_FAN_CTRL); - data->temp1_auto_point_temp[1] = (reg & 0xF8) >> 1; - reg &= 0x07; - reg = 0x20 >> reg; - if (reg > 0) - data->temp1_auto_point_temp[2] = - data->temp1_auto_point_temp[1] + - (data->pwm1_auto_point_pwm[2] - - data->pwm1_auto_point_pwm[1]) / reg; - else - data->temp1_auto_point_temp[2] = 255; - - reg = i2c_smbus_read_byte_data(client, - AMC6821_REG_RTEMP_FAN_CTRL); - data->temp2_auto_point_temp[1] = (reg & 0xF8) >> 1; - reg &= 0x07; - reg = 0x20 >> reg; - if (reg > 0) - data->temp2_auto_point_temp[2] = - data->temp2_auto_point_temp[1] + - (data->pwm1_auto_point_pwm[2] - - data->pwm1_auto_point_pwm[1]) / reg; - else - data->temp2_auto_point_temp[2] = 255; - - reg = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1); - reg = (reg >> 5) & 0x3; - switch (reg) { - case 0: /*open loop: software sets pwm1*/ - data->pwm1_auto_channels_temp = 0; - data->pwm1_enable = 1; +static int amc6821_read_alarms(struct regmap *regmap, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + int reg, mask, err; + u32 regval; + + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_min_alarm: + reg = AMC6821_REG_STAT1; + mask = channel ? AMC6821_STAT1_RTL : AMC6821_STAT1_LTL; break; - case 2: /*closed loop: remote T (temp2)*/ - data->pwm1_auto_channels_temp = 2; - data->pwm1_enable = 2; + case hwmon_temp_max_alarm: + reg = AMC6821_REG_STAT1; + mask = channel ? AMC6821_STAT1_RTH : AMC6821_STAT1_LTH; break; - case 3: /*closed loop: local and remote T (temp2)*/ - data->pwm1_auto_channels_temp = 3; - data->pwm1_enable = 3; + case hwmon_temp_crit_alarm: + reg = AMC6821_REG_STAT2; + mask = channel ? AMC6821_STAT2_RTC : AMC6821_STAT2_LTC; break; - case 1: /* - * semi-open loop: software sets rpm, chip controls - * pwm1, currently not implemented - */ - data->pwm1_auto_channels_temp = 0; - data->pwm1_enable = 0; + case hwmon_temp_fault: + reg = AMC6821_REG_STAT1; + mask = AMC6821_STAT1_RTF; break; + default: + return -EOPNOTSUPP; } - - data->last_updated = jiffies; - data->valid = true; + break; + case hwmon_fan: + switch (attr) { + case hwmon_fan_fault: + reg = AMC6821_REG_STAT1; + mask = AMC6821_STAT1_FANS; + break; + default: + return -EOPNOTSUPP; + } + break; + default: + return -EOPNOTSUPP; } - mutex_unlock(&data->update_lock); - return data; + err = regmap_read(regmap, reg, ®val); + if (err) + return err; + *val = !!(regval & mask); + return 0; } -static ssize_t temp_show(struct device *dev, struct device_attribute *devattr, - char *buf) +static int amc6821_temp_read(struct device *dev, u32 attr, int channel, long *val) { - struct amc6821_data *data = amc6821_update_device(dev); - int ix = to_sensor_dev_attr(devattr)->index; + struct amc6821_data *data = dev_get_drvdata(dev); - return sprintf(buf, "%d\n", data->temp[ix] * 1000); + switch (attr) { + case hwmon_temp_input: + case hwmon_temp_min: + case hwmon_temp_max: + case hwmon_temp_crit: + return amc6821_temp_read_values(data->regmap, attr, channel, val); + case hwmon_temp_min_alarm: + case hwmon_temp_max_alarm: + case hwmon_temp_crit_alarm: + case hwmon_temp_fault: + return amc6821_read_alarms(data->regmap, hwmon_temp, attr, channel, val); + default: + return -EOPNOTSUPP; + } } -static ssize_t temp_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static int amc6821_temp_write(struct device *dev, u32 attr, int channel, long val) { struct amc6821_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - int ix = to_sensor_dev_attr(attr)->index; - long val; + int reg; - int ret = kstrtol(buf, 10, &val); - if (ret) - return ret; - val = clamp_val(val / 1000, -128, 127); + val = DIV_ROUND_CLOSEST(clamp_val(val, -128000, 127000), 1000); - mutex_lock(&data->update_lock); - data->temp[ix] = val; - if (i2c_smbus_write_byte_data(client, temp_reg[ix], data->temp[ix])) { - dev_err(&client->dev, "Register write error, aborting.\n"); - count = -EIO; + switch (attr) { + case hwmon_temp_min: + reg = channel ? AMC6821_REG_RTEMP_LIMIT_MIN : AMC6821_REG_LTEMP_LIMIT_MIN; + break; + case hwmon_temp_max: + reg = channel ? AMC6821_REG_RTEMP_LIMIT_MAX : AMC6821_REG_LTEMP_LIMIT_MAX; + break; + case hwmon_temp_crit: + reg = channel ? AMC6821_REG_RTEMP_CRIT : AMC6821_REG_LTEMP_CRIT; + break; + default: + return -EOPNOTSUPP; } - mutex_unlock(&data->update_lock); - return count; + return regmap_write(data->regmap, reg, val); } -static ssize_t temp_alarm_show(struct device *dev, - struct device_attribute *devattr, char *buf) +static int amc6821_pwm_read(struct device *dev, u32 attr, long *val) { - struct amc6821_data *data = amc6821_update_device(dev); - int ix = to_sensor_dev_attr(devattr)->index; - u8 flag; + struct amc6821_data *data = dev_get_drvdata(dev); + struct regmap *regmap = data->regmap; + u32 regval; + int err; - switch (ix) { - case IDX_TEMP1_MIN: - flag = data->stat1 & AMC6821_STAT1_LTL; - break; - case IDX_TEMP1_MAX: - flag = data->stat1 & AMC6821_STAT1_LTH; + switch (attr) { + case hwmon_pwm_enable: + err = regmap_read(regmap, AMC6821_REG_CONF1, ®val); + if (err) + return err; + switch (regval & (AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1)) { + case 0: + *val = 1; /* manual */ + break; + case AMC6821_CONF1_FDRC0: + *val = 4; /* target rpm (fan1_target) controlled */ + break; + case AMC6821_CONF1_FDRC1: + *val = 2; /* remote temp controlled */ + break; + default: + *val = 3; /* max(local, remote) temp controlled */ + break; + } + return 0; + case hwmon_pwm_mode: + err = regmap_read(regmap, AMC6821_REG_CONF2, ®val); + if (err) + return err; + *val = !!(regval & AMC6821_CONF2_TACH_MODE); + return 0; + case hwmon_pwm_auto_channels_temp: + err = regmap_read(regmap, AMC6821_REG_CONF1, ®val); + if (err) + return err; + switch (regval & (AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1)) { + case 0: + case AMC6821_CONF1_FDRC0: + *val = 0; /* manual or target rpm controlled */ + break; + case AMC6821_CONF1_FDRC1: + *val = 2; /* remote temp controlled */ + break; + default: + *val = 3; /* max(local, remote) temp controlled */ + break; + } + return 0; + case hwmon_pwm_input: + err = regmap_read(regmap, AMC6821_REG_DCY, ®val); + if (err) + return err; + *val = regval; + return 0; + default: + return -EOPNOTSUPP; + } +} + +static int amc6821_pwm_write(struct device *dev, u32 attr, long val) +{ + struct amc6821_data *data = dev_get_drvdata(dev); + struct regmap *regmap = data->regmap; + u32 mode; + + switch (attr) { + case hwmon_pwm_enable: + switch (val) { + case 1: + mode = 0; + break; + case 2: + mode = AMC6821_CONF1_FDRC1; + break; + case 3: + mode = AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1; + break; + case 4: + mode = AMC6821_CONF1_FDRC0; + break; + default: + return -EINVAL; + } + return regmap_update_bits(regmap, AMC6821_REG_CONF1, + AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1, + mode); + case hwmon_pwm_mode: + if (val < 0 || val > 1) + return -EINVAL; + return regmap_update_bits(regmap, AMC6821_REG_CONF2, + AMC6821_CONF2_TACH_MODE, + val ? AMC6821_CONF2_TACH_MODE : 0); break; - case IDX_TEMP1_CRIT: - flag = data->stat2 & AMC6821_STAT2_LTC; + case hwmon_pwm_input: + if (val < 0 || val > 255) + return -EINVAL; + return regmap_write(regmap, AMC6821_REG_DCY, val); + default: + return -EOPNOTSUPP; + } +} + +static int amc6821_fan_read_rpm(struct regmap *regmap, u32 attr, long *val) +{ + int reg, err; + u8 regs[2]; + u32 regval; + + switch (attr) { + case hwmon_fan_input: + reg = AMC6821_REG_TDATA_LOW; break; - case IDX_TEMP2_MIN: - flag = data->stat1 & AMC6821_STAT1_RTL; + case hwmon_fan_min: + reg = AMC6821_REG_TACH_LLIMITL; break; - case IDX_TEMP2_MAX: - flag = data->stat1 & AMC6821_STAT1_RTH; + case hwmon_fan_max: + reg = AMC6821_REG_TACH_HLIMITL; break; - case IDX_TEMP2_CRIT: - flag = data->stat2 & AMC6821_STAT2_RTC; + case hwmon_fan_target: + reg = AMC6821_REG_TACH_SETTINGL; break; default: - dev_dbg(dev, "Unknown attr->index (%d).\n", ix); - return -EINVAL; + return -EOPNOTSUPP; } - if (flag) - return sprintf(buf, "1"); - else - return sprintf(buf, "0"); -} -static ssize_t temp2_fault_show(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - struct amc6821_data *data = amc6821_update_device(dev); - if (data->stat1 & AMC6821_STAT1_RTF) - return sprintf(buf, "1"); - else - return sprintf(buf, "0"); -} + err = regmap_bulk_read(regmap, reg, regs, 2); + if (err) + return err; -static ssize_t pwm1_show(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct amc6821_data *data = amc6821_update_device(dev); - return sprintf(buf, "%d\n", data->pwm1); + regval = (regs[1] << 8) | regs[0]; + *val = regval ? 6000000 / regval : 0; + + return 0; } -static ssize_t pwm1_store(struct device *dev, - struct device_attribute *devattr, const char *buf, - size_t count) +static int amc6821_fan_read(struct device *dev, u32 attr, long *val) { struct amc6821_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - long val; - int ret = kstrtol(buf, 10, &val); - if (ret) - return ret; - - mutex_lock(&data->update_lock); - data->pwm1 = clamp_val(val , 0, 255); - i2c_smbus_write_byte_data(client, AMC6821_REG_DCY, data->pwm1); - mutex_unlock(&data->update_lock); - return count; -} + struct regmap *regmap = data->regmap; + u32 regval; + int err; -static ssize_t pwm1_enable_show(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - struct amc6821_data *data = amc6821_update_device(dev); - return sprintf(buf, "%d\n", data->pwm1_enable); + switch (attr) { + case hwmon_fan_input: + case hwmon_fan_min: + case hwmon_fan_max: + case hwmon_fan_target: + return amc6821_fan_read_rpm(regmap, attr, val); + case hwmon_fan_fault: + return amc6821_read_alarms(regmap, hwmon_fan, attr, 0, val); + case hwmon_fan_pulses: + err = regmap_read(regmap, AMC6821_REG_CONF4, ®val); + if (err) + return err; + *val = (regval & AMC6821_CONF4_PSPR) ? 4 : 2; + return 0; + default: + return -EOPNOTSUPP; + } } -static ssize_t pwm1_enable_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static int amc6821_fan_write(struct device *dev, u32 attr, long val) { struct amc6821_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - long val; - int config = kstrtol(buf, 10, &val); - if (config) - return config; - - mutex_lock(&data->update_lock); - config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1); - if (config < 0) { - dev_err(&client->dev, - "Error reading configuration register, aborting.\n"); - count = config; - goto unlock; + struct regmap *regmap = data->regmap; + u8 regs[2]; + int reg; + + if (attr == hwmon_fan_pulses) { + if (val != 2 && val != 4) + return -EINVAL; + return regmap_update_bits(regmap, AMC6821_REG_CONF4, + AMC6821_CONF4_PSPR, + val == 4 ? AMC6821_CONF4_PSPR : 0); } - switch (val) { - case 1: - config &= ~AMC6821_CONF1_FDRC0; - config &= ~AMC6821_CONF1_FDRC1; + if (val < 0) + return -EINVAL; + + switch (attr) { + case hwmon_fan_min: + if (!val) /* no unlimited minimum speed */ + return -EINVAL; + reg = AMC6821_REG_TACH_LLIMITL; break; - case 2: - config &= ~AMC6821_CONF1_FDRC0; - config |= AMC6821_CONF1_FDRC1; + case hwmon_fan_max: + reg = AMC6821_REG_TACH_HLIMITL; break; - case 3: - config |= AMC6821_CONF1_FDRC0; - config |= AMC6821_CONF1_FDRC1; + case hwmon_fan_target: + if (!val) /* no unlimited target speed */ + return -EINVAL; + reg = AMC6821_REG_TACH_SETTINGL; break; default: - count = -EINVAL; - goto unlock; + return -EOPNOTSUPP; } - if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF1, config)) { - dev_err(&client->dev, - "Configuration register write error, aborting.\n"); - count = -EIO; - } -unlock: - mutex_unlock(&data->update_lock); - return count; -} -static ssize_t pwm1_auto_channels_temp_show(struct device *dev, - struct device_attribute *devattr, - char *buf) -{ - struct amc6821_data *data = amc6821_update_device(dev); - return sprintf(buf, "%d\n", data->pwm1_auto_channels_temp); + val = val ? 6000000 / clamp_val(val, 1, 6000000) : 0; + val = clamp_val(val, 0, 0xffff); + + regs[0] = val & 0xff; + regs[1] = val >> 8; + + return regmap_bulk_write(data->regmap, reg, regs, 2); } static ssize_t temp_auto_point_temp_show(struct device *dev, struct device_attribute *devattr, char *buf) { + struct amc6821_data *data = dev_get_drvdata(dev); int ix = to_sensor_dev_attr_2(devattr)->index; int nr = to_sensor_dev_attr_2(devattr)->nr; - struct amc6821_data *data = amc6821_update_device(dev); - switch (nr) { - case 1: - return sprintf(buf, "%d\n", - data->temp1_auto_point_temp[ix] * 1000); - case 2: - return sprintf(buf, "%d\n", - data->temp2_auto_point_temp[ix] * 1000); - default: - dev_dbg(dev, "Unknown attr->nr (%d).\n", nr); - return -EINVAL; - } + u8 temps[3]; + int err; + + mutex_lock(&data->update_lock); + err = amc6821_get_auto_point_temps(data->regmap, nr, temps); + mutex_unlock(&data->update_lock); + if (err) + return err; + + return sysfs_emit(buf, "%d\n", temps[ix] * 1000); } static ssize_t pwm1_auto_point_pwm_show(struct device *dev, struct device_attribute *devattr, char *buf) { + struct amc6821_data *data = dev_get_drvdata(dev); int ix = to_sensor_dev_attr(devattr)->index; - struct amc6821_data *data = amc6821_update_device(dev); - return sprintf(buf, "%d\n", data->pwm1_auto_point_pwm[ix]); + u32 val; + int err; + + switch (ix) { + case 0: + val = 0; + break; + case 1: + err = regmap_read(data->regmap, AMC6821_REG_DCY_LOW_TEMP, &val); + if (err) + return err; + break; + default: + val = 255; + break; + } + return sysfs_emit(buf, "%d\n", val); } -static inline ssize_t set_slope_register(struct i2c_client *client, - u8 reg, - u8 dpwm, - u8 *ptemp) +/* + * Set TEMP[0-4] (low temperature) and SLP[0-2] (slope) of local or remote + * TEMP-FAN control register. + * + * Return 0 on success or negative error code. + * + * Channel 0: local, channel 1: remote + */ +static inline int set_slope_register(struct regmap *regmap, int channel, u8 *temps) { - int dt; - u8 tmp; + u8 regval = FIELD_PREP(AMC6821_TEMP_LIMIT_MASK, temps[1] / 4); + u8 tmp, dpwm; + int err, dt; + u32 pwm; + + err = regmap_read(regmap, AMC6821_REG_DCY_LOW_TEMP, &pwm); + if (err) + return err; - dt = ptemp[2]-ptemp[1]; + dpwm = 255 - pwm; + + dt = temps[2] - temps[1]; for (tmp = 4; tmp > 0; tmp--) { - if (dt * (0x20 >> tmp) >= dpwm) + if (dt * (32 >> tmp) >= dpwm) break; } - tmp |= (ptemp[1] & 0x7C) << 1; - if (i2c_smbus_write_byte_data(client, - reg, tmp)) { - dev_err(&client->dev, "Register write error, aborting.\n"); - return -EIO; - } - return 0; + regval |= FIELD_PREP(AMC6821_TEMP_SLOPE_MASK, tmp); + + return regmap_write(regmap, + channel ? AMC6821_REG_RTEMP_FAN_CTRL : AMC6821_REG_LTEMP_FAN_CTRL, + regval); } static ssize_t temp_auto_point_temp_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct amc6821_data *data = amc6821_update_device(dev); - struct i2c_client *client = data->client; + struct amc6821_data *data = dev_get_drvdata(dev); int ix = to_sensor_dev_attr_2(attr)->index; int nr = to_sensor_dev_attr_2(attr)->nr; - u8 *ptemp; - u8 reg; - int dpwm; + struct regmap *regmap = data->regmap; + u8 temps[3], otemps[3]; long val; - int ret = kstrtol(buf, 10, &val); + int ret; + + ret = kstrtol(buf, 10, &val); if (ret) return ret; - switch (nr) { - case 1: - ptemp = data->temp1_auto_point_temp; - reg = AMC6821_REG_LTEMP_FAN_CTRL; - break; - case 2: - ptemp = data->temp2_auto_point_temp; - reg = AMC6821_REG_RTEMP_FAN_CTRL; - break; - default: - dev_dbg(dev, "Unknown attr->nr (%d).\n", nr); - return -EINVAL; - } - mutex_lock(&data->update_lock); - data->valid = false; + + ret = amc6821_get_auto_point_temps(data->regmap, nr, temps); + if (ret) + goto unlock; switch (ix) { case 0: - ptemp[0] = clamp_val(val / 1000, 0, - data->temp1_auto_point_temp[1]); - ptemp[0] = clamp_val(ptemp[0], 0, - data->temp2_auto_point_temp[1]); - ptemp[0] = clamp_val(ptemp[0], 0, 63); - if (i2c_smbus_write_byte_data( - client, - AMC6821_REG_PSV_TEMP, - ptemp[0])) { - dev_err(&client->dev, - "Register write error, aborting.\n"); - count = -EIO; - } - goto EXIT; + /* + * Passive cooling temperature. Range limit against low limit + * of both channels. + */ + ret = amc6821_get_auto_point_temps(data->regmap, 1 - nr, otemps); + if (ret) + goto unlock; + val = DIV_ROUND_CLOSEST(clamp_val(val, 0, 63000), 1000); + val = clamp_val(val, 0, min(temps[1], otemps[1])); + ret = regmap_write(regmap, AMC6821_REG_PSV_TEMP, val); + break; case 1: - ptemp[1] = clamp_val(val / 1000, (ptemp[0] & 0x7C) + 4, 124); - ptemp[1] &= 0x7C; - ptemp[2] = clamp_val(ptemp[2], ptemp[1] + 1, 255); + /* + * Low limit; must be between passive and high limit, + * and not exceed 124. Step size is 4 degrees C. + */ + val = clamp_val(val, DIV_ROUND_UP(temps[0], 4) * 4000, 124000); + temps[1] = DIV_ROUND_CLOSEST(val, 4000) * 4; + val = temps[1] / 4; + /* Auto-adjust high limit if necessary */ + temps[2] = clamp_val(temps[2], temps[1] + 1, 255); + ret = set_slope_register(regmap, nr, temps); break; case 2: - ptemp[2] = clamp_val(val / 1000, ptemp[1]+1, 255); + /* high limit, must be higher than low limit */ + val = clamp_val(val, (temps[1] + 1) * 1000, 255000); + temps[2] = DIV_ROUND_CLOSEST(val, 1000); + ret = set_slope_register(regmap, nr, temps); break; default: - dev_dbg(dev, "Unknown attr->index (%d).\n", ix); - count = -EINVAL; - goto EXIT; + ret = -EINVAL; + break; } - dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1]; - if (set_slope_register(client, reg, dpwm, ptemp)) - count = -EIO; - -EXIT: +unlock: mutex_unlock(&data->update_lock); - return count; + return ret ? : count; } static ssize_t pwm1_auto_point_pwm_store(struct device *dev, @@ -556,204 +637,52 @@ static ssize_t pwm1_auto_point_pwm_store(struct device *dev, const char *buf, size_t count) { struct amc6821_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - int dpwm; - long val; - int ret = kstrtol(buf, 10, &val); - if (ret) - return ret; - - mutex_lock(&data->update_lock); - data->pwm1_auto_point_pwm[1] = clamp_val(val, 0, 254); - if (i2c_smbus_write_byte_data(client, AMC6821_REG_DCY_LOW_TEMP, - data->pwm1_auto_point_pwm[1])) { - dev_err(&client->dev, "Register write error, aborting.\n"); - count = -EIO; - goto EXIT; - } - dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1]; - if (set_slope_register(client, AMC6821_REG_LTEMP_FAN_CTRL, dpwm, - data->temp1_auto_point_temp)) { - count = -EIO; - goto EXIT; - } - if (set_slope_register(client, AMC6821_REG_RTEMP_FAN_CTRL, dpwm, - data->temp2_auto_point_temp)) { - count = -EIO; - goto EXIT; - } - -EXIT: - data->valid = false; - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t fan_show(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct amc6821_data *data = amc6821_update_device(dev); - int ix = to_sensor_dev_attr(devattr)->index; - if (0 == data->fan[ix]) - return sprintf(buf, "0"); - return sprintf(buf, "%d\n", (int)(6000000 / data->fan[ix])); -} + struct regmap *regmap = data->regmap; + int i, ret; + u8 val; -static ssize_t fan1_fault_show(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - struct amc6821_data *data = amc6821_update_device(dev); - if (data->stat1 & AMC6821_STAT1_FANS) - return sprintf(buf, "1"); - else - return sprintf(buf, "0"); -} - -static ssize_t fan_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct amc6821_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - long val; - int ix = to_sensor_dev_attr(attr)->index; - int ret = kstrtol(buf, 10, &val); + ret = kstrtou8(buf, 10, &val); if (ret) return ret; - val = 1 > val ? 0xFFFF : 6000000/val; mutex_lock(&data->update_lock); - data->fan[ix] = (u16) clamp_val(val, 1, 0xFFFF); - if (i2c_smbus_write_byte_data(client, fan_reg_low[ix], - data->fan[ix] & 0xFF)) { - dev_err(&client->dev, "Register write error, aborting.\n"); - count = -EIO; - goto EXIT; - } - if (i2c_smbus_write_byte_data(client, - fan_reg_hi[ix], data->fan[ix] >> 8)) { - dev_err(&client->dev, "Register write error, aborting.\n"); - count = -EIO; - } -EXIT: - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t fan1_div_show(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - struct amc6821_data *data = amc6821_update_device(dev); - return sprintf(buf, "%d\n", data->fan1_div); -} + ret = regmap_write(regmap, AMC6821_REG_DCY_LOW_TEMP, val); + if (ret) + goto unlock; -static ssize_t fan1_div_store(struct device *dev, - struct device_attribute *attr, const char *buf, - size_t count) -{ - struct amc6821_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - long val; - int config = kstrtol(buf, 10, &val); - if (config) - return config; + for (i = 0; i < 2; i++) { + u8 temps[3]; - mutex_lock(&data->update_lock); - config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4); - if (config < 0) { - dev_err(&client->dev, - "Error reading configuration register, aborting.\n"); - count = config; - goto EXIT; - } - switch (val) { - case 2: - config &= ~AMC6821_CONF4_PSPR; - data->fan1_div = 2; - break; - case 4: - config |= AMC6821_CONF4_PSPR; - data->fan1_div = 4; - break; - default: - count = -EINVAL; - goto EXIT; - } - if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4, config)) { - dev_err(&client->dev, - "Configuration register write error, aborting.\n"); - count = -EIO; + ret = amc6821_get_auto_point_temps(regmap, i, temps); + if (ret) + break; + ret = set_slope_register(regmap, i, temps); + if (ret) + break; } -EXIT: +unlock: mutex_unlock(&data->update_lock); - return count; + return ret ? : count; } -static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, IDX_TEMP1_INPUT); -static SENSOR_DEVICE_ATTR_RW(temp1_min, temp, IDX_TEMP1_MIN); -static SENSOR_DEVICE_ATTR_RW(temp1_max, temp, IDX_TEMP1_MAX); -static SENSOR_DEVICE_ATTR_RW(temp1_crit, temp, IDX_TEMP1_CRIT); -static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, temp_alarm, IDX_TEMP1_MIN); -static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, temp_alarm, IDX_TEMP1_MAX); -static SENSOR_DEVICE_ATTR_RO(temp1_crit_alarm, temp_alarm, IDX_TEMP1_CRIT); -static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, IDX_TEMP2_INPUT); -static SENSOR_DEVICE_ATTR_RW(temp2_min, temp, IDX_TEMP2_MIN); -static SENSOR_DEVICE_ATTR_RW(temp2_max, temp, IDX_TEMP2_MAX); -static SENSOR_DEVICE_ATTR_RW(temp2_crit, temp, IDX_TEMP2_CRIT); -static SENSOR_DEVICE_ATTR_RO(temp2_fault, temp2_fault, 0); -static SENSOR_DEVICE_ATTR_RO(temp2_min_alarm, temp_alarm, IDX_TEMP2_MIN); -static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, temp_alarm, IDX_TEMP2_MAX); -static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, temp_alarm, IDX_TEMP2_CRIT); -static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, IDX_FAN1_INPUT); -static SENSOR_DEVICE_ATTR_RW(fan1_min, fan, IDX_FAN1_MIN); -static SENSOR_DEVICE_ATTR_RW(fan1_max, fan, IDX_FAN1_MAX); -static SENSOR_DEVICE_ATTR_RO(fan1_fault, fan1_fault, 0); -static SENSOR_DEVICE_ATTR_RW(fan1_div, fan1_div, 0); - -static SENSOR_DEVICE_ATTR_RW(pwm1, pwm1, 0); -static SENSOR_DEVICE_ATTR_RW(pwm1_enable, pwm1_enable, 0); static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point1_pwm, pwm1_auto_point_pwm, 0); static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_pwm, pwm1_auto_point_pwm, 1); static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point3_pwm, pwm1_auto_point_pwm, 2); -static SENSOR_DEVICE_ATTR_RO(pwm1_auto_channels_temp, pwm1_auto_channels_temp, - 0); static SENSOR_DEVICE_ATTR_2_RO(temp1_auto_point1_temp, temp_auto_point_temp, - 1, 0); + 0, 0); static SENSOR_DEVICE_ATTR_2_RW(temp1_auto_point2_temp, temp_auto_point_temp, - 1, 1); + 0, 1); static SENSOR_DEVICE_ATTR_2_RW(temp1_auto_point3_temp, temp_auto_point_temp, - 1, 2); + 0, 2); static SENSOR_DEVICE_ATTR_2_RW(temp2_auto_point1_temp, temp_auto_point_temp, - 2, 0); + 1, 0); static SENSOR_DEVICE_ATTR_2_RW(temp2_auto_point2_temp, temp_auto_point_temp, - 2, 1); + 1, 1); static SENSOR_DEVICE_ATTR_2_RW(temp2_auto_point3_temp, temp_auto_point_temp, - 2, 2); + 1, 2); static struct attribute *amc6821_attrs[] = { - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp1_min.dev_attr.attr, - &sensor_dev_attr_temp1_max.dev_attr.attr, - &sensor_dev_attr_temp1_crit.dev_attr.attr, - &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, - &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, - &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_input.dev_attr.attr, - &sensor_dev_attr_temp2_min.dev_attr.attr, - &sensor_dev_attr_temp2_max.dev_attr.attr, - &sensor_dev_attr_temp2_crit.dev_attr.attr, - &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_fault.dev_attr.attr, - &sensor_dev_attr_fan1_input.dev_attr.attr, - &sensor_dev_attr_fan1_min.dev_attr.attr, - &sensor_dev_attr_fan1_max.dev_attr.attr, - &sensor_dev_attr_fan1_fault.dev_attr.attr, - &sensor_dev_attr_fan1_div.dev_attr.attr, - &sensor_dev_attr_pwm1.dev_attr.attr, - &sensor_dev_attr_pwm1_enable.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr, @@ -765,13 +694,118 @@ static struct attribute *amc6821_attrs[] = { &sensor_dev_attr_temp2_auto_point3_temp.dev_attr.attr, NULL }; - ATTRIBUTE_GROUPS(amc6821); +static int amc6821_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + switch (type) { + case hwmon_temp: + return amc6821_temp_read(dev, attr, channel, val); + case hwmon_fan: + return amc6821_fan_read(dev, attr, val); + case hwmon_pwm: + return amc6821_pwm_read(dev, attr, val); + default: + return -EOPNOTSUPP; + } +} + +static int amc6821_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + switch (type) { + case hwmon_temp: + return amc6821_temp_write(dev, attr, channel, val); + case hwmon_fan: + return amc6821_fan_write(dev, attr, val); + case hwmon_pwm: + return amc6821_pwm_write(dev, attr, val); + default: + return -EOPNOTSUPP; + } +} + +static umode_t amc6821_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + case hwmon_temp_min_alarm: + case hwmon_temp_max_alarm: + case hwmon_temp_crit_alarm: + case hwmon_temp_fault: + return 0444; + case hwmon_temp_min: + case hwmon_temp_max: + case hwmon_temp_crit: + return 0644; + default: + return 0; + } + case hwmon_fan: + switch (attr) { + case hwmon_fan_input: + case hwmon_fan_fault: + return 0444; + case hwmon_fan_pulses: + case hwmon_fan_min: + case hwmon_fan_max: + case hwmon_fan_target: + return 0644; + default: + return 0; + } + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_mode: + case hwmon_pwm_enable: + case hwmon_pwm_input: + return 0644; + case hwmon_pwm_auto_channels_temp: + return 0444; + default: + return 0; + } + default: + return 0; + } +} + +static const struct hwmon_channel_info * const amc6821_info[] = { + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | + HWMON_T_CRIT | HWMON_T_MIN_ALARM | + HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM, + HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | + HWMON_T_CRIT | HWMON_T_MIN_ALARM | + HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | + HWMON_T_FAULT), + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX | + HWMON_F_TARGET | HWMON_F_PULSES | HWMON_F_FAULT), + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE | HWMON_PWM_MODE | + HWMON_PWM_AUTO_CHANNELS_TEMP), + NULL +}; + +static const struct hwmon_ops amc6821_hwmon_ops = { + .is_visible = amc6821_is_visible, + .read = amc6821_read, + .write = amc6821_write, +}; + +static const struct hwmon_chip_info amc6821_chip_info = { + .ops = &amc6821_hwmon_ops, + .info = amc6821_info, +}; + /* Return 0 if detection is successful, -ENODEV otherwise */ -static int amc6821_detect( - struct i2c_client *client, - struct i2c_board_info *info) +static int amc6821_detect(struct i2c_client *client, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; int address = client->addr; @@ -814,121 +848,90 @@ static int amc6821_detect( return 0; } -static int amc6821_init_client(struct i2c_client *client) +static int amc6821_init_client(struct amc6821_data *data) { - int config; - int err = -EIO; + struct regmap *regmap = data->regmap; + int err; if (init) { - config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4); - - if (config < 0) { - dev_err(&client->dev, - "Error reading configuration register, aborting.\n"); - return err; - } - - config |= AMC6821_CONF4_MODE; - - if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4, - config)) { - dev_err(&client->dev, - "Configuration register write error, aborting.\n"); - return err; - } - - config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF3); - - if (config < 0) { - dev_err(&client->dev, - "Error reading configuration register, aborting.\n"); - return err; - } - - dev_info(&client->dev, "Revision %d\n", config & 0x0f); - - config &= ~AMC6821_CONF3_THERM_FAN_EN; - - if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF3, - config)) { - dev_err(&client->dev, - "Configuration register write error, aborting.\n"); - return err; - } - - config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF2); - - if (config < 0) { - dev_err(&client->dev, - "Error reading configuration register, aborting.\n"); + err = regmap_set_bits(regmap, AMC6821_REG_CONF4, AMC6821_CONF4_MODE); + if (err) return err; - } - - config &= ~AMC6821_CONF2_RTFIE; - config &= ~AMC6821_CONF2_LTOIE; - config &= ~AMC6821_CONF2_RTOIE; - if (i2c_smbus_write_byte_data(client, - AMC6821_REG_CONF2, config)) { - dev_err(&client->dev, - "Configuration register write error, aborting.\n"); + err = regmap_clear_bits(regmap, AMC6821_REG_CONF3, AMC6821_CONF3_THERM_FAN_EN); + if (err) return err; - } - - config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1); - - if (config < 0) { - dev_err(&client->dev, - "Error reading configuration register, aborting.\n"); + err = regmap_clear_bits(regmap, AMC6821_REG_CONF2, + AMC6821_CONF2_RTFIE | + AMC6821_CONF2_LTOIE | + AMC6821_CONF2_RTOIE); + if (err) return err; - } - config &= ~AMC6821_CONF1_THERMOVIE; - config &= ~AMC6821_CONF1_FANIE; - config |= AMC6821_CONF1_START; - if (pwminv) - config |= AMC6821_CONF1_PWMINV; - else - config &= ~AMC6821_CONF1_PWMINV; - - if (i2c_smbus_write_byte_data( - client, AMC6821_REG_CONF1, config)) { - dev_err(&client->dev, - "Configuration register write error, aborting.\n"); + err = regmap_update_bits(regmap, AMC6821_REG_CONF1, + AMC6821_CONF1_THERMOVIE | AMC6821_CONF1_FANIE | + AMC6821_CONF1_START | AMC6821_CONF1_PWMINV, + AMC6821_CONF1_START | + (pwminv ? AMC6821_CONF1_PWMINV : 0)); + if (err) return err; - } } return 0; } +static bool amc6821_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case AMC6821_REG_STAT1: + case AMC6821_REG_STAT2: + case AMC6821_REG_TEMP_LO: + case AMC6821_REG_TDATA_LOW: + case AMC6821_REG_LTEMP_HI: + case AMC6821_REG_RTEMP_HI: + case AMC6821_REG_TDATA_HI: + return true; + default: + return false; + } +} + +static const struct regmap_config amc6821_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = AMC6821_REG_CONF3, + .volatile_reg = amc6821_volatile_reg, + .cache_type = REGCACHE_MAPLE, +}; + static int amc6821_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct amc6821_data *data; struct device *hwmon_dev; + struct regmap *regmap; int err; data = devm_kzalloc(dev, sizeof(struct amc6821_data), GFP_KERNEL); if (!data) return -ENOMEM; - data->client = client; - mutex_init(&data->update_lock); + regmap = devm_regmap_init_i2c(client, &amc6821_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to initialize regmap\n"); + data->regmap = regmap; - /* - * Initialize the amc6821 chip - */ - err = amc6821_init_client(client); + err = amc6821_init_client(data); if (err) return err; - hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, - data, - amc6821_groups); + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, + data, &amc6821_chip_info, + amc6821_groups); return PTR_ERR_OR_ZERO(hwmon_dev); } static const struct i2c_device_id amc6821_id[] = { - { "amc6821", amc6821 }, + { "amc6821", 0 }, { } }; @@ -937,7 +940,6 @@ MODULE_DEVICE_TABLE(i2c, amc6821_id); static const struct of_device_id __maybe_unused amc6821_of_match[] = { { .compatible = "ti,amc6821", - .data = (void *)amc6821, }, { } }; diff --git a/drivers/hwmon/asus-ec-sensors.c b/drivers/hwmon/asus-ec-sensors.c index 36f9e38000d5..6bb8d7b1d219 100644 --- a/drivers/hwmon/asus-ec-sensors.c +++ b/drivers/hwmon/asus-ec-sensors.c @@ -322,6 +322,14 @@ static const struct ec_board_info board_info_pro_art_x570_creator_wifi = { .family = family_amd_500_series, }; +static const struct ec_board_info board_info_pro_art_x670E_creator_wifi = { + .sensors = SENSOR_TEMP_CPU | SENSOR_TEMP_CPU_PACKAGE | + SENSOR_TEMP_MB | SENSOR_TEMP_VRM | + SENSOR_TEMP_T_SENSOR, + .mutex_path = ACPI_GLOBAL_LOCK_PSEUDO_PATH, + .family = family_amd_600_series, +}; + static const struct ec_board_info board_info_pro_art_b550_creator = { .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR | @@ -486,6 +494,8 @@ static const struct dmi_system_id dmi_table[] = { &board_info_prime_x570_pro), DMI_EXACT_MATCH_ASUS_BOARD_NAME("ProArt X570-CREATOR WIFI", &board_info_pro_art_x570_creator_wifi), + DMI_EXACT_MATCH_ASUS_BOARD_NAME("ProArt X670E-CREATOR WIFI", + &board_info_pro_art_x670E_creator_wifi), DMI_EXACT_MATCH_ASUS_BOARD_NAME("ProArt B550-CREATOR", &board_info_pro_art_b550_creator), DMI_EXACT_MATCH_ASUS_BOARD_NAME("Pro WS X570-ACE", diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index d778a2aaefec..3751c1e3eddd 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -1389,4 +1389,5 @@ static void __exit atk0110_exit(void) module_init(atk0110_init); module_exit(atk0110_exit); +MODULE_DESCRIPTION("ASUS ATK0110 driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c index 3e63666a61bd..e1a7f7aa7f80 100644 --- a/drivers/hwmon/corsair-cpro.c +++ b/drivers/hwmon/corsair-cpro.c @@ -10,11 +10,13 @@ #include <linux/bitops.h> #include <linux/completion.h> +#include <linux/debugfs.h> #include <linux/hid.h> #include <linux/hwmon.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/types.h> @@ -28,6 +30,8 @@ #define LABEL_LENGTH 11 #define REQ_TIMEOUT 300 +#define CTL_GET_FW_VER 0x02 /* returns the firmware version in bytes 1-3 */ +#define CTL_GET_BL_VER 0x06 /* returns the bootloader version in bytes 1-2 */ #define CTL_GET_TMP_CNCT 0x10 /* * returns in bytes 1-4 for each temp sensor: * 0 not connected @@ -78,6 +82,7 @@ struct ccp_device { struct hid_device *hdev; struct device *hwmon_dev; + struct dentry *debugfs; /* For reinitializing the completion below */ spinlock_t wait_input_report_lock; struct completion wait_input_report; @@ -88,6 +93,8 @@ struct ccp_device { DECLARE_BITMAP(temp_cnct, NUM_TEMP_SENSORS); DECLARE_BITMAP(fan_cnct, NUM_FANS); char fan_label[6][LABEL_LENGTH]; + u8 firmware_ver[3]; + u8 bootloader_ver[2]; }; /* converts response error in buffer to errno */ @@ -496,6 +503,83 @@ static int get_temp_cnct(struct ccp_device *ccp) return 0; } +/* read firmware version */ +static int get_fw_version(struct ccp_device *ccp) +{ + int ret; + + ret = send_usb_cmd(ccp, CTL_GET_FW_VER, 0, 0, 0); + if (ret) { + hid_notice(ccp->hdev, "Failed to read firmware version.\n"); + return ret; + } + ccp->firmware_ver[0] = ccp->buffer[1]; + ccp->firmware_ver[1] = ccp->buffer[2]; + ccp->firmware_ver[2] = ccp->buffer[3]; + + return 0; +} + +/* read bootloader version */ +static int get_bl_version(struct ccp_device *ccp) +{ + int ret; + + ret = send_usb_cmd(ccp, CTL_GET_BL_VER, 0, 0, 0); + if (ret) { + hid_notice(ccp->hdev, "Failed to read bootloader version.\n"); + return ret; + } + ccp->bootloader_ver[0] = ccp->buffer[1]; + ccp->bootloader_ver[1] = ccp->buffer[2]; + + return 0; +} + +static int firmware_show(struct seq_file *seqf, void *unused) +{ + struct ccp_device *ccp = seqf->private; + + seq_printf(seqf, "%d.%d.%d\n", + ccp->firmware_ver[0], + ccp->firmware_ver[1], + ccp->firmware_ver[2]); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(firmware); + +static int bootloader_show(struct seq_file *seqf, void *unused) +{ + struct ccp_device *ccp = seqf->private; + + seq_printf(seqf, "%d.%d\n", + ccp->bootloader_ver[0], + ccp->bootloader_ver[1]); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(bootloader); + +static void ccp_debugfs_init(struct ccp_device *ccp) +{ + char name[32]; + int ret; + + scnprintf(name, sizeof(name), "corsaircpro-%s", dev_name(&ccp->hdev->dev)); + ccp->debugfs = debugfs_create_dir(name, NULL); + + ret = get_fw_version(ccp); + if (!ret) + debugfs_create_file("firmware_version", 0444, + ccp->debugfs, ccp, &firmware_fops); + + ret = get_bl_version(ccp); + if (!ret) + debugfs_create_file("bootloader_version", 0444, + ccp->debugfs, ccp, &bootloader_fops); +} + static int ccp_probe(struct hid_device *hdev, const struct hid_device_id *id) { struct ccp_device *ccp; @@ -542,6 +626,9 @@ static int ccp_probe(struct hid_device *hdev, const struct hid_device_id *id) ret = get_fan_cnct(ccp); if (ret) goto out_hw_close; + + ccp_debugfs_init(ccp); + ccp->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "corsaircpro", ccp, &ccp_chip_info, NULL); if (IS_ERR(ccp->hwmon_dev)) { @@ -562,6 +649,7 @@ static void ccp_remove(struct hid_device *hdev) { struct ccp_device *ccp = hid_get_drvdata(hdev); + debugfs_remove_recursive(ccp->debugfs); hwmon_device_unregister(ccp->hwmon_dev); hid_hw_close(hdev); hid_hw_stop(hdev); @@ -582,6 +670,7 @@ static struct hid_driver ccp_driver = { }; MODULE_DEVICE_TABLE(hid, ccp_devices); +MODULE_DESCRIPTION("Corsair Commander Pro controller driver"); MODULE_LICENSE("GPL"); static int __init ccp_init(void) diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c index 2c7c92272fe3..f8f22b8a67cd 100644 --- a/drivers/hwmon/corsair-psu.c +++ b/drivers/hwmon/corsair-psu.c @@ -875,15 +875,16 @@ static const struct hid_device_id corsairpsu_idtable[] = { { HID_USB_DEVICE(0x1b1c, 0x1c04) }, /* Corsair HX650i */ { HID_USB_DEVICE(0x1b1c, 0x1c05) }, /* Corsair HX750i */ { HID_USB_DEVICE(0x1b1c, 0x1c06) }, /* Corsair HX850i */ - { HID_USB_DEVICE(0x1b1c, 0x1c07) }, /* Corsair HX1000i Series 2022 */ - { HID_USB_DEVICE(0x1b1c, 0x1c08) }, /* Corsair HX1200i */ + { HID_USB_DEVICE(0x1b1c, 0x1c07) }, /* Corsair HX1000i Legacy */ + { HID_USB_DEVICE(0x1b1c, 0x1c08) }, /* Corsair HX1200i Legacy */ { HID_USB_DEVICE(0x1b1c, 0x1c09) }, /* Corsair RM550i */ { HID_USB_DEVICE(0x1b1c, 0x1c0a) }, /* Corsair RM650i */ { HID_USB_DEVICE(0x1b1c, 0x1c0b) }, /* Corsair RM750i */ { HID_USB_DEVICE(0x1b1c, 0x1c0c) }, /* Corsair RM850i */ { HID_USB_DEVICE(0x1b1c, 0x1c0d) }, /* Corsair RM1000i */ { HID_USB_DEVICE(0x1b1c, 0x1c1e) }, /* Corsair HX1000i Series 2023 */ - { HID_USB_DEVICE(0x1b1c, 0x1c1f) }, /* Corsair HX1500i Series 2022 and 2023 */ + { HID_USB_DEVICE(0x1b1c, 0x1c1f) }, /* Corsair HX1500i Legacy and Series 2023 */ + { HID_USB_DEVICE(0x1b1c, 0x1c23) }, /* Corsair HX1200i Series 2023 */ { }, }; MODULE_DEVICE_TABLE(hid, corsairpsu_idtable); diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c index 942526bd4775..0362a13f6525 100644 --- a/drivers/hwmon/dell-smm-hwmon.c +++ b/drivers/hwmon/dell-smm-hwmon.c @@ -1264,6 +1264,13 @@ static const struct dmi_system_id i8k_dmi_table[] __initconst = { }, }, { + .ident = "Dell OptiPlex 7060", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "OptiPlex 7060"), + }, + }, + { .ident = "Dell Precision", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 3dcef221041d..1a9b28dc91e6 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -2461,8 +2461,6 @@ static int dme1737_i2c_detect(struct i2c_client *client, return 0; } -static const struct i2c_device_id dme1737_id[]; - static int dme1737_i2c_probe(struct i2c_client *client) { struct dme1737_data *data; @@ -2474,7 +2472,7 @@ static int dme1737_i2c_probe(struct i2c_client *client) return -ENOMEM; i2c_set_clientdata(client, data); - data->type = i2c_match_id(dme1737_id, client)->driver_data; + data->type = (uintptr_t)i2c_get_match_data(client); data->client = client; data->name = client->name; mutex_init(&data->update_lock); diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index bffbc8040171..42ec34cb8a5f 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -342,8 +342,6 @@ static const struct attribute_group ds1621_group = { }; __ATTRIBUTE_GROUPS(ds1621); -static const struct i2c_device_id ds1621_id[]; - static int ds1621_probe(struct i2c_client *client) { struct ds1621_data *data; @@ -356,7 +354,7 @@ static int ds1621_probe(struct i2c_client *client) mutex_init(&data->update_lock); - data->kind = i2c_match_id(ds1621_id, client)->driver_data; + data->kind = (uintptr_t)i2c_get_match_data(client); data->client = client; /* Initialize the DS1621 chip */ diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index 8c572bb64f5d..7e867f132420 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -111,31 +111,6 @@ struct f75375_data { s8 temp_max_hyst[2]; }; -static int f75375_detect(struct i2c_client *client, - struct i2c_board_info *info); -static int f75375_probe(struct i2c_client *client); -static void f75375_remove(struct i2c_client *client); - -static const struct i2c_device_id f75375_id[] = { - { "f75373", f75373 }, - { "f75375", f75375 }, - { "f75387", f75387 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, f75375_id); - -static struct i2c_driver f75375_driver = { - .class = I2C_CLASS_HWMON, - .driver = { - .name = "f75375", - }, - .probe = f75375_probe, - .remove = f75375_remove, - .id_table = f75375_id, - .detect = f75375_detect, - .address_list = normal_i2c, -}; - static inline int f75375_read8(struct i2c_client *client, u8 reg) { return i2c_smbus_read_byte_data(client, reg); @@ -830,7 +805,7 @@ static int f75375_probe(struct i2c_client *client) i2c_set_clientdata(client, data); mutex_init(&data->update_lock); - data->kind = i2c_match_id(f75375_id, client)->driver_data; + data->kind = (uintptr_t)i2c_get_match_data(client); err = sysfs_create_group(&client->dev.kobj, &f75375_group); if (err) @@ -901,6 +876,25 @@ static int f75375_detect(struct i2c_client *client, return 0; } +static const struct i2c_device_id f75375_id[] = { + { "f75373", f75373 }, + { "f75375", f75375 }, + { "f75387", f75387 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, f75375_id); + +static struct i2c_driver f75375_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "f75375", + }, + .probe = f75375_probe, + .remove = f75375_remove, + .id_table = f75375_id, + .detect = f75375_detect, + .address_list = normal_i2c, +}; module_i2c_driver(f75375_driver); MODULE_AUTHOR("Riku Voipio"); diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index b30512a705a7..1811f84d835e 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -1087,7 +1087,7 @@ static int fschmd_probe(struct i2c_client *client) "Heracles", "Heimdall", "Hades", "Syleus" }; static const int watchdog_minors[] = { WATCHDOG_MINOR, 212, 213, 214, 215 }; int i, err; - enum chips kind = i2c_match_id(fschmd_id, client)->driver_data; + enum chips kind = (uintptr_t)i2c_get_match_data(client); data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL); if (!data) diff --git a/drivers/hwmon/g762.c b/drivers/hwmon/g762.c index af1228708e25..4fa3aa1271da 100644 --- a/drivers/hwmon/g762.c +++ b/drivers/hwmon/g762.c @@ -44,6 +44,7 @@ #define DRVNAME "g762" static const struct i2c_device_id g762_id[] = { + { "g761" }, { "g762" }, { "g763" }, { } @@ -69,6 +70,7 @@ enum g762_regs { #define G762_REG_FAN_CMD1_PWM_POLARITY 0x02 /* PWM polarity */ #define G762_REG_FAN_CMD1_PULSE_PER_REV 0x01 /* pulse per fan revolution */ +#define G761_REG_FAN_CMD2_FAN_CLOCK 0x20 /* choose internal clock*/ #define G762_REG_FAN_CMD2_GEAR_MODE_1 0x08 /* fan gear mode */ #define G762_REG_FAN_CMD2_GEAR_MODE_0 0x04 #define G762_REG_FAN_CMD2_FAN_STARTV_1 0x02 /* fan startup voltage */ @@ -115,6 +117,7 @@ enum g762_regs { struct g762_data { struct i2c_client *client; + bool internal_clock; struct clk *clk; /* update mutex */ @@ -566,6 +569,7 @@ static int do_set_fan_startv(struct device *dev, unsigned long val) #ifdef CONFIG_OF static const struct of_device_id g762_dt_match[] = { + { .compatible = "gmt,g761" }, { .compatible = "gmt,g762" }, { .compatible = "gmt,g763" }, { }, @@ -597,6 +601,21 @@ static int g762_of_clock_enable(struct i2c_client *client) if (!client->dev.of_node) return 0; + data = i2c_get_clientdata(client); + + /* + * Skip CLK detection and handling if we use internal clock. + * This is only valid for g761. + */ + data->internal_clock = of_device_is_compatible(client->dev.of_node, + "gmt,g761") && + !of_property_present(client->dev.of_node, + "clocks"); + if (data->internal_clock) { + do_set_clk_freq(&client->dev, 32768); + return 0; + } + clk = of_clk_get(client->dev.of_node, 0); if (IS_ERR(clk)) { dev_err(&client->dev, "failed to get clock\n"); @@ -616,7 +635,6 @@ static int g762_of_clock_enable(struct i2c_client *client) goto clk_unprep; } - data = i2c_get_clientdata(client); data->clk = clk; ret = devm_add_action(&client->dev, g762_of_clock_disable, data); @@ -1025,16 +1043,26 @@ ATTRIBUTE_GROUPS(g762); static inline int g762_fan_init(struct device *dev) { struct g762_data *data = g762_update_client(dev); + int ret; if (IS_ERR(data)) return PTR_ERR(data); + /* internal_clock can only be set with compatible g761 */ + if (data->internal_clock) + data->fan_cmd2 |= G761_REG_FAN_CMD2_FAN_CLOCK; + data->fan_cmd1 |= G762_REG_FAN_CMD1_DET_FAN_FAIL; data->fan_cmd1 |= G762_REG_FAN_CMD1_DET_FAN_OOC; data->valid = false; - return i2c_smbus_write_byte_data(data->client, G762_REG_FAN_CMD1, - data->fan_cmd1); + ret = i2c_smbus_write_byte_data(data->client, G762_REG_FAN_CMD1, + data->fan_cmd1); + if (ret) + return ret; + + return i2c_smbus_write_byte_data(data->client, G762_REG_FAN_CMD2, + data->fan_cmd2); } static int g762_probe(struct i2c_client *client) @@ -1056,15 +1084,16 @@ static int g762_probe(struct i2c_client *client) data->client = client; mutex_init(&data->update_lock); - /* Enable fan failure detection and fan out of control protection */ - ret = g762_fan_init(dev); + /* Get configuration via DT ... */ + ret = g762_of_clock_enable(client); if (ret) return ret; - /* Get configuration via DT ... */ - ret = g762_of_clock_enable(client); + /* Enable fan failure detection and fan out of control protection */ + ret = g762_fan_init(dev); if (ret) return ret; + ret = g762_of_prop_import(client); if (ret) return ret; diff --git a/drivers/hwmon/gsc-hwmon.c b/drivers/hwmon/gsc-hwmon.c index 1501ceb551e7..cb2f01dc4326 100644 --- a/drivers/hwmon/gsc-hwmon.c +++ b/drivers/hwmon/gsc-hwmon.c @@ -39,7 +39,7 @@ struct gsc_hwmon_data { struct hwmon_chip_info chip; }; -static struct regmap_bus gsc_hwmon_regmap_bus = { +static const struct regmap_bus gsc_hwmon_regmap_bus = { .reg_read = gsc_read, .reg_write = gsc_write, }; @@ -249,7 +249,6 @@ gsc_hwmon_get_devtree_pdata(struct device *dev) { struct gsc_hwmon_platform_data *pdata; struct gsc_hwmon_channel *ch; - struct fwnode_handle *child; struct device_node *fan; int nchannels; @@ -276,25 +275,21 @@ gsc_hwmon_get_devtree_pdata(struct device *dev) ch = pdata->channels; /* allocate structures for channels and count instances of each type */ - device_for_each_child_node(dev, child) { + device_for_each_child_node_scoped(dev, child) { if (fwnode_property_read_string(child, "label", &ch->name)) { dev_err(dev, "channel without label\n"); - fwnode_handle_put(child); return ERR_PTR(-EINVAL); } if (fwnode_property_read_u32(child, "reg", &ch->reg)) { dev_err(dev, "channel without reg\n"); - fwnode_handle_put(child); return ERR_PTR(-EINVAL); } if (fwnode_property_read_u32(child, "gw,mode", &ch->mode)) { dev_err(dev, "channel without mode\n"); - fwnode_handle_put(child); return ERR_PTR(-EINVAL); } if (ch->mode > mode_max) { dev_err(dev, "invalid channel mode\n"); - fwnode_handle_put(child); return ERR_PTR(-EINVAL); } diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index 3b259c425ab7..a362080d41fa 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -14,6 +14,7 @@ #include <linux/err.h> #include <linux/gfp.h> #include <linux/hwmon.h> +#include <linux/i2c.h> #include <linux/idr.h> #include <linux/kstrtox.h> #include <linux/list.h> @@ -136,7 +137,7 @@ static void hwmon_dev_release(struct device *dev) kfree(hwdev); } -static struct class hwmon_class = { +static const struct class hwmon_class = { .name = "hwmon", .dev_groups = hwmon_dev_attr_groups, .dev_release = hwmon_dev_release, @@ -309,6 +310,114 @@ static int hwmon_attr_base(enum hwmon_sensor_types type) return 1; } +#if IS_REACHABLE(CONFIG_I2C) + +/* + * PEC support + * + * The 'pec' attribute is attached to I2C client devices. It is only provided + * if the i2c controller supports PEC. + * + * The mutex ensures that PEC configuration between i2c device and the hardware + * is consistent. Use a single mutex because attribute writes are supposed to be + * rare, and maintaining a separate mutex for each hardware monitoring device + * would add substantial complexity to the driver for little if any gain. + * + * The hardware monitoring device is identified as child of the i2c client + * device. This assumes that only a single hardware monitoring device is + * attached to an i2c client device. + */ + +static DEFINE_MUTEX(hwmon_pec_mutex); + +static int hwmon_match_device(struct device *dev, void *data) +{ + return dev->class == &hwmon_class; +} + +static ssize_t pec_show(struct device *dev, struct device_attribute *dummy, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + + return sysfs_emit(buf, "%d\n", !!(client->flags & I2C_CLIENT_PEC)); +} + +static ssize_t pec_store(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct hwmon_device *hwdev; + struct device *hdev; + bool val; + int err; + + err = kstrtobool(buf, &val); + if (err < 0) + return err; + + hdev = device_find_child(dev, NULL, hwmon_match_device); + if (!hdev) + return -ENODEV; + + mutex_lock(&hwmon_pec_mutex); + + /* + * If there is no write function, we assume that chip specific + * handling is not required. + */ + hwdev = to_hwmon_device(hdev); + if (hwdev->chip->ops->write) { + err = hwdev->chip->ops->write(hdev, hwmon_chip, hwmon_chip_pec, 0, val); + if (err && err != -EOPNOTSUPP) + goto unlock; + } + + if (!val) + client->flags &= ~I2C_CLIENT_PEC; + else + client->flags |= I2C_CLIENT_PEC; + + err = count; +unlock: + mutex_unlock(&hwmon_pec_mutex); + put_device(hdev); + + return err; +} + +static DEVICE_ATTR_RW(pec); + +static void hwmon_remove_pec(void *dev) +{ + device_remove_file(dev, &dev_attr_pec); +} + +static int hwmon_pec_register(struct device *hdev) +{ + struct i2c_client *client = i2c_verify_client(hdev->parent); + int err; + + if (!client) + return -EINVAL; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_PEC)) + return 0; + + err = device_create_file(&client->dev, &dev_attr_pec); + if (err) + return err; + + return devm_add_action_or_reset(hdev, hwmon_remove_pec, &client->dev); +} + +#else /* CONFIG_I2C */ +static int hwmon_pec_register(struct device *hdev) +{ + return -EINVAL; +} +#endif /* CONFIG_I2C */ + /* sysfs attribute management */ static ssize_t hwmon_attr_show(struct device *dev, @@ -397,10 +506,6 @@ static struct attribute *hwmon_genattr(const void *drvdata, const char *name; bool is_string = is_string_attr(type, attr); - /* The attribute is invisible if there is no template string */ - if (!template) - return ERR_PTR(-ENOENT); - mode = ops->is_visible(drvdata, type, attr, index); if (!mode) return ERR_PTR(-ENOENT); @@ -712,8 +817,8 @@ static int hwmon_genattrs(const void *drvdata, attr = __ffs(attr_mask); attr_mask &= ~BIT(attr); - if (attr >= template_size) - return -EINVAL; + if (attr >= template_size || !templates[attr]) + continue; /* attribute is invisible */ a = hwmon_genattr(drvdata, info->type, attr, i, templates[attr], ops); if (IS_ERR(a)) { @@ -849,16 +954,26 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata, INIT_LIST_HEAD(&hwdev->tzdata); if (hdev->of_node && chip && chip->ops->read && - chip->info[0]->type == hwmon_chip && - (chip->info[0]->config[0] & HWMON_C_REGISTER_TZ)) { - err = hwmon_thermal_register_sensors(hdev); - if (err) { - device_unregister(hdev); - /* - * Don't worry about hwdev; hwmon_dev_release(), called - * from device_unregister(), will free it. - */ - goto ida_remove; + chip->info[0]->type == hwmon_chip) { + u32 config = chip->info[0]->config[0]; + + if (config & HWMON_C_REGISTER_TZ) { + err = hwmon_thermal_register_sensors(hdev); + if (err) { + device_unregister(hdev); + /* + * Don't worry about hwdev; hwmon_dev_release(), + * called from device_unregister(), will free it. + */ + goto ida_remove; + } + } + if (config & HWMON_C_PEC) { + err = hwmon_pec_register(hdev); + if (err) { + device_unregister(hdev); + goto ida_remove; + } } } diff --git a/drivers/hwmon/iio_hwmon.c b/drivers/hwmon/iio_hwmon.c index 4c8a80847891..fab32e1e15f2 100644 --- a/drivers/hwmon/iio_hwmon.c +++ b/drivers/hwmon/iio_hwmon.c @@ -49,16 +49,17 @@ static ssize_t iio_hwmon_read_val(struct device *dev, struct iio_channel *chan = &state->channels[sattr->index]; enum iio_chan_type type; - ret = iio_read_channel_processed(chan, &result); - if (ret < 0) - return ret; - ret = iio_get_channel_type(chan, &type); if (ret < 0) return ret; if (type == IIO_POWER) - result *= 1000; /* mili-Watts to micro-Watts conversion */ + /* mili-Watts to micro-Watts conversion */ + ret = iio_read_channel_processed_scale(chan, &result, 1000); + else + ret = iio_read_channel_processed(chan, &result); + if (ret < 0) + return ret; return sprintf(buf, "%d\n", result); } diff --git a/drivers/hwmon/ina238.c b/drivers/hwmon/ina238.c index 855626f1bc01..2d9f12f68d50 100644 --- a/drivers/hwmon/ina238.c +++ b/drivers/hwmon/ina238.c @@ -96,7 +96,7 @@ #define INA238_BUS_VOLTAGE_LSB 3125 /* 3.125 mV/lsb */ #define INA238_DIE_TEMP_LSB 125 /* 125 mC/lsb */ -static struct regmap_config ina238_regmap_config = { +static const struct regmap_config ina238_regmap_config = { .max_register = INA238_REGISTERS, .reg_bits = 8, .val_bits = 16, diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c index d8415d1f21fc..9ab4205622e2 100644 --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -73,6 +73,11 @@ #define INA226_READ_AVG(reg) (((reg) & INA226_AVG_RD_MASK) >> 9) #define INA226_SHIFT_AVG(val) ((val) << 9) +#define INA226_ALERT_POLARITY_MASK 0x0002 +#define INA226_SHIFT_ALERT_POLARITY(val) ((val) << 1) +#define INA226_ALERT_POL_LOW 0 +#define INA226_ALERT_POL_HIGH 1 + /* bit number of alert functions in Mask/Enable Register */ #define INA226_SHUNT_OVER_VOLTAGE_BIT 15 #define INA226_SHUNT_UNDER_VOLTAGE_BIT 14 @@ -178,6 +183,14 @@ static u16 ina226_interval_to_reg(int interval) return INA226_SHIFT_AVG(avg_bits); } +static int ina2xx_set_alert_polarity(struct ina2xx_data *data, + unsigned long val) +{ + return regmap_update_bits(data->regmap, INA226_MASK_ENABLE, + INA226_ALERT_POLARITY_MASK, + INA226_SHIFT_ALERT_POLARITY(val)); +} + /* * Calibration register is set to the best value, which eliminates * truncation errors on calculating current register in hardware. @@ -612,8 +625,6 @@ static const struct attribute_group ina226_group = { .attrs = ina226_attrs, }; -static const struct i2c_device_id ina2xx_id[]; - static int ina2xx_probe(struct i2c_client *client) { struct device *dev = &client->dev; @@ -623,10 +634,7 @@ static int ina2xx_probe(struct i2c_client *client) int ret, group = 0; enum ina2xx_ids chip; - if (client->dev.of_node) - chip = (uintptr_t)of_device_get_match_data(&client->dev); - else - chip = i2c_match_id(ina2xx_id, client)->driver_data; + chip = (uintptr_t)i2c_get_match_data(client); data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) @@ -659,6 +667,25 @@ static int ina2xx_probe(struct i2c_client *client) if (ret) return dev_err_probe(dev, ret, "failed to enable vs regulator\n"); + if (chip == ina226) { + if (of_property_read_bool(dev->of_node, "ti,alert-polarity-active-high")) { + ret = ina2xx_set_alert_polarity(data, + INA226_ALERT_POL_HIGH); + if (ret < 0) { + return dev_err_probe(dev, ret, + "failed to set alert polarity active high\n"); + } + } else { + /* Set default value i.e active low */ + ret = ina2xx_set_alert_polarity(data, + INA226_ALERT_POL_LOW); + if (ret < 0) { + return dev_err_probe(dev, ret, + "failed to set alert polarity active low\n"); + } + } + } + ret = ina2xx_init(data); if (ret < 0) { dev_err(dev, "error configuring the device: %d\n", ret); diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c index 7092f8f025b8..a260cff750a5 100644 --- a/drivers/hwmon/jc42.c +++ b/drivers/hwmon/jc42.c @@ -79,20 +79,9 @@ static const unsigned short normal_i2c[] = { #define AT30TS00_DEVID 0x8201 #define AT30TS00_DEVID_MASK 0xffff -#define AT30TSE004_DEVID 0x2200 -#define AT30TSE004_DEVID_MASK 0xffff - -/* Giantec */ -#define GT30TS00_DEVID 0x2200 -#define GT30TS00_DEVID_MASK 0xff00 - #define GT34TS02_DEVID 0x3300 #define GT34TS02_DEVID_MASK 0xff00 -/* IDT */ -#define TSE2004_DEVID 0x2200 -#define TSE2004_DEVID_MASK 0xff00 - #define TS3000_DEVID 0x2900 /* Also matches TSE2002 */ #define TS3000_DEVID_MASK 0xff00 @@ -116,9 +105,6 @@ static const unsigned short normal_i2c[] = { #define MCP98243_DEVID 0x2100 #define MCP98243_DEVID_MASK 0xfffc -#define MCP98244_DEVID 0x2200 -#define MCP98244_DEVID_MASK 0xfffc - #define MCP9843_DEVID 0x0000 /* Also matches mcp9805 */ #define MCP9843_DEVID_MASK 0xfffe @@ -136,12 +122,6 @@ static const unsigned short normal_i2c[] = { #define CAT34TS02C_DEVID 0x0a00 #define CAT34TS02C_DEVID_MASK 0xfff0 -#define CAT34TS04_DEVID 0x2200 -#define CAT34TS04_DEVID_MASK 0xfff0 - -#define N34TS04_DEVID 0x2230 -#define N34TS04_DEVID_MASK 0xfff0 - /* ST Microelectronics */ #define STTS424_DEVID 0x0101 #define STTS424_DEVID_MASK 0xffff @@ -152,15 +132,12 @@ static const unsigned short normal_i2c[] = { #define STTS2002_DEVID 0x0300 #define STTS2002_DEVID_MASK 0xffff -#define STTS2004_DEVID 0x2201 -#define STTS2004_DEVID_MASK 0xffff - #define STTS3000_DEVID 0x0200 #define STTS3000_DEVID_MASK 0xffff -/* Seiko Instruments */ -#define S34TS04A_DEVID 0x2221 -#define S34TS04A_DEVID_MASK 0xffff +/* TSE2004 compliant sensors */ +#define TSE2004_DEVID 0x2200 +#define TSE2004_DEVID_MASK 0xff00 static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 }; @@ -173,8 +150,8 @@ struct jc42_chips { static struct jc42_chips jc42_chips[] = { { ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK }, { ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK }, - { ATMEL_MANID2, AT30TSE004_DEVID, AT30TSE004_DEVID_MASK }, - { GT_MANID, GT30TS00_DEVID, GT30TS00_DEVID_MASK }, + { ATMEL_MANID2, TSE2004_DEVID, TSE2004_DEVID_MASK }, + { GT_MANID, TSE2004_DEVID, TSE2004_DEVID_MASK }, { GT_MANID2, GT34TS02_DEVID, GT34TS02_DEVID_MASK }, { IDT_MANID, TSE2004_DEVID, TSE2004_DEVID_MASK }, { IDT_MANID, TS3000_DEVID, TS3000_DEVID_MASK }, @@ -184,19 +161,19 @@ static struct jc42_chips jc42_chips[] = { { MCP_MANID, MCP9808_DEVID, MCP9808_DEVID_MASK }, { MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK }, { MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK }, - { MCP_MANID, MCP98244_DEVID, MCP98244_DEVID_MASK }, + { MCP_MANID, TSE2004_DEVID, TSE2004_DEVID_MASK }, { MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK }, { NXP_MANID, SE97_DEVID, SE97_DEVID_MASK }, { ONS_MANID, CAT6095_DEVID, CAT6095_DEVID_MASK }, { ONS_MANID, CAT34TS02C_DEVID, CAT34TS02C_DEVID_MASK }, - { ONS_MANID, CAT34TS04_DEVID, CAT34TS04_DEVID_MASK }, - { ONS_MANID, N34TS04_DEVID, N34TS04_DEVID_MASK }, + { ONS_MANID, TSE2004_DEVID, TSE2004_DEVID_MASK }, + { ONS_MANID, TSE2004_DEVID, TSE2004_DEVID_MASK }, { NXP_MANID, SE98_DEVID, SE98_DEVID_MASK }, - { SI_MANID, S34TS04A_DEVID, S34TS04A_DEVID_MASK }, + { SI_MANID, TSE2004_DEVID, TSE2004_DEVID_MASK }, { STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK }, { STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK }, { STM_MANID, STTS2002_DEVID, STTS2002_DEVID_MASK }, - { STM_MANID, STTS2004_DEVID, STTS2004_DEVID_MASK }, + { STM_MANID, TSE2004_DEVID, TSE2004_DEVID_MASK }, { STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK }, }; @@ -436,7 +413,11 @@ static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info) if (cap < 0 || config < 0 || manid < 0 || devid < 0) return -ENODEV; - if ((cap & 0xff00) || (config & 0xf800)) + if ((cap & 0xff00) || (config & 0xf820)) + return -ENODEV; + + if ((devid & TSE2004_DEVID_MASK) == TSE2004_DEVID && + (cap & 0x00e7) != 0x00e7) return -ENODEV; for (i = 0; i < ARRAY_SIZE(jc42_chips); i++) { diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index 0878a044dd8e..035176a98ce9 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -1104,10 +1104,7 @@ static int lm63_probe(struct i2c_client *client) mutex_init(&data->update_lock); /* Set the device type */ - if (client->dev.of_node) - data->kind = (uintptr_t)of_device_get_match_data(&client->dev); - else - data->kind = i2c_match_id(lm63_id, client)->driver_data; + data->kind = (uintptr_t)i2c_get_match_data(client); if (data->kind == lm64) data->temp2_offset = 16000; diff --git a/drivers/hwmon/lm70.c b/drivers/hwmon/lm70.c index 481e4e1f8f4f..0d5a250cb672 100644 --- a/drivers/hwmon/lm70.c +++ b/drivers/hwmon/lm70.c @@ -169,11 +169,7 @@ static int lm70_probe(struct spi_device *spi) struct lm70 *p_lm70; int chip; - if (dev_fwnode(&spi->dev)) - chip = (int)(uintptr_t)device_get_match_data(&spi->dev); - else - chip = spi_get_device_id(spi)->driver_data; - + chip = (kernel_ulong_t)spi_get_device_match_data(spi); /* signaling is SPI_MODE_0 */ if ((spi->mode & SPI_MODE_X_MASK) != SPI_MODE_0) diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index e00750718536..2c2205aec7d4 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -625,20 +625,12 @@ static void lm75_remove(void *data) i2c_smbus_write_byte_data(client, LM75_REG_CONF, lm75->orig_conf); } -static const struct i2c_device_id lm75_ids[]; - static int lm75_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct device *hwmon_dev; struct lm75_data *data; int status, err; - enum lm75_type kind; - - if (client->dev.of_node) - kind = (uintptr_t)of_device_get_match_data(&client->dev); - else - kind = i2c_match_id(lm75_ids, client)->driver_data; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) @@ -649,7 +641,7 @@ static int lm75_probe(struct i2c_client *client) return -ENOMEM; data->client = client; - data->kind = kind; + data->kind = (uintptr_t)i2c_get_match_data(client); data->vs = devm_regulator_get(dev, "vs"); if (IS_ERR(data->vs)) diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index b739c354311b..8b53bb312069 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -627,8 +627,6 @@ static int lm78_i2c_detect(struct i2c_client *client, return -ENODEV; } -static const struct i2c_device_id lm78_i2c_id[]; - static int lm78_i2c_probe(struct i2c_client *client) { struct device *dev = &client->dev; @@ -640,7 +638,7 @@ static int lm78_i2c_probe(struct i2c_client *client) return -ENOMEM; data->client = client; - data->type = i2c_match_id(lm78_i2c_id, client)->driver_data; + data->type = (uintptr_t)i2c_get_match_data(client); /* Initialize the LM78 chip */ lm78_init_device(data); diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c index b333c9bde4e6..f800fe2ef18b 100644 --- a/drivers/hwmon/lm83.c +++ b/drivers/hwmon/lm83.c @@ -417,13 +417,6 @@ static int lm83_detect(struct i2c_client *client, return 0; } -static const struct i2c_device_id lm83_id[] = { - { "lm83", lm83 }, - { "lm82", lm82 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, lm83_id); - static int lm83_probe(struct i2c_client *client) { struct device *dev = &client->dev; @@ -438,7 +431,7 @@ static int lm83_probe(struct i2c_client *client) if (IS_ERR(data->regmap)) return PTR_ERR(data->regmap); - data->type = i2c_match_id(lm83_id, client)->driver_data; + data->type = (uintptr_t)i2c_get_match_data(client); hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data, &lm83_chip_info, NULL); @@ -449,6 +442,13 @@ static int lm83_probe(struct i2c_client *client) * Driver data (common to all clients) */ +static const struct i2c_device_id lm83_id[] = { + { "lm83", lm83 }, + { "lm82", lm82 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm83_id); + static struct i2c_driver lm83_driver = { .class = I2C_CLASS_HWMON, .driver = { diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 68c210002357..1c244ed75122 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -1544,8 +1544,6 @@ static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info) return 0; } -static const struct i2c_device_id lm85_id[]; - static int lm85_probe(struct i2c_client *client) { struct device *dev = &client->dev; @@ -1558,10 +1556,7 @@ static int lm85_probe(struct i2c_client *client) return -ENOMEM; data->client = client; - if (client->dev.of_node) - data->type = (uintptr_t)of_device_get_match_data(&client->dev); - else - data->type = i2c_match_id(lm85_id, client)->driver_data; + data->type = (uintptr_t)i2c_get_match_data(client); mutex_init(&data->update_lock); /* Fill in the chip specific driver values */ diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index e0d7454a301c..ca5c52b38c0f 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -1270,42 +1270,6 @@ static int lm90_update_device(struct device *dev) return 0; } -/* pec used for devices with PEC support */ -static ssize_t pec_show(struct device *dev, struct device_attribute *dummy, - char *buf) -{ - struct i2c_client *client = to_i2c_client(dev); - - return sprintf(buf, "%d\n", !!(client->flags & I2C_CLIENT_PEC)); -} - -static ssize_t pec_store(struct device *dev, struct device_attribute *dummy, - const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - long val; - int err; - - err = kstrtol(buf, 10, &val); - if (err < 0) - return err; - - switch (val) { - case 0: - client->flags &= ~I2C_CLIENT_PEC; - break; - case 1: - client->flags |= I2C_CLIENT_PEC; - break; - default: - return -EINVAL; - } - - return count; -} - -static DEVICE_ATTR_RW(pec); - static int lm90_temp_get_resolution(struct lm90_data *data, int index) { switch (index) { @@ -2659,11 +2623,6 @@ static irqreturn_t lm90_irq_thread(int irq, void *dev_id) return IRQ_NONE; } -static void lm90_remove_pec(void *dev) -{ - device_remove_file(dev, &dev_attr_pec); -} - static int lm90_probe_channel_from_dt(struct i2c_client *client, struct device_node *child, struct lm90_data *data) @@ -2764,10 +2723,7 @@ static int lm90_probe(struct i2c_client *client) INIT_WORK(&data->report_work, lm90_report_alarms); /* Set the device type */ - if (client->dev.of_node) - data->kind = (uintptr_t)of_device_get_match_data(&client->dev); - else - data->kind = i2c_match_id(lm90_id, client)->driver_data; + data->kind = (uintptr_t)i2c_get_match_data(client); /* * Different devices have different alarm bits triggering the @@ -2802,6 +2758,8 @@ static int lm90_probe(struct i2c_client *client) data->chip_config[0] |= HWMON_C_UPDATE_INTERVAL; if (data->flags & LM90_HAVE_FAULTQUEUE) data->chip_config[0] |= HWMON_C_TEMP_SAMPLES; + if (data->flags & (LM90_HAVE_PEC | LM90_HAVE_PARTIAL_PEC)) + data->chip_config[0] |= HWMON_C_PEC; data->info[1] = &data->temp_info; info = &data->temp_info; @@ -2878,19 +2836,6 @@ static int lm90_probe(struct i2c_client *client) return err; } - /* - * The 'pec' attribute is attached to the i2c device and thus created - * separately. - */ - if (data->flags & (LM90_HAVE_PEC | LM90_HAVE_PARTIAL_PEC)) { - err = device_create_file(dev, &dev_attr_pec); - if (err) - return err; - err = devm_add_action_or_reset(dev, lm90_remove_pec, dev); - if (err) - return err; - } - hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data, &data->chip, NULL); diff --git a/drivers/hwmon/lm95234.c b/drivers/hwmon/lm95234.c index 67b9d7636ee4..9a7afdb49895 100644 --- a/drivers/hwmon/lm95234.c +++ b/drivers/hwmon/lm95234.c @@ -301,7 +301,8 @@ static ssize_t tcrit2_store(struct device *dev, struct device_attribute *attr, if (ret < 0) return ret; - val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, index ? 255 : 127); + val = DIV_ROUND_CLOSEST(clamp_val(val, 0, (index ? 255 : 127) * 1000), + 1000); mutex_lock(&data->update_lock); data->tcrit2[index] = val; @@ -350,7 +351,7 @@ static ssize_t tcrit1_store(struct device *dev, struct device_attribute *attr, if (ret < 0) return ret; - val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 255); + val = DIV_ROUND_CLOSEST(clamp_val(val, 0, 255000), 1000); mutex_lock(&data->update_lock); data->tcrit1[index] = val; @@ -391,7 +392,7 @@ static ssize_t tcrit1_hyst_store(struct device *dev, if (ret < 0) return ret; - val = DIV_ROUND_CLOSEST(val, 1000); + val = DIV_ROUND_CLOSEST(clamp_val(val, -255000, 255000), 1000); val = clamp_val((int)data->tcrit1[index] - val, 0, 31); mutex_lock(&data->update_lock); @@ -431,7 +432,7 @@ static ssize_t offset_store(struct device *dev, struct device_attribute *attr, return ret; /* Accuracy is 1/2 degrees C */ - val = clamp_val(DIV_ROUND_CLOSEST(val, 500), -128, 127); + val = DIV_ROUND_CLOSEST(clamp_val(val, -64000, 63500), 500); mutex_lock(&data->update_lock); data->toffset[index] = val; @@ -677,10 +678,9 @@ static int lm95234_init_client(struct i2c_client *client) return 0; } -static const struct i2c_device_id lm95234_id[]; - static int lm95234_probe(struct i2c_client *client) { + enum chips type = (uintptr_t)i2c_get_match_data(client); struct device *dev = &client->dev; struct lm95234_data *data; struct device *hwmon_dev; @@ -699,7 +699,7 @@ static int lm95234_probe(struct i2c_client *client) return err; data->groups[0] = &lm95234_common_group; - if (i2c_match_id(lm95234_id, client)->driver_data == lm95234) + if (type == lm95234) data->groups[1] = &lm95234_group; hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, diff --git a/drivers/hwmon/ltc2991.c b/drivers/hwmon/ltc2991.c index 06750bb93c23..573cd8f5721b 100644 --- a/drivers/hwmon/ltc2991.c +++ b/drivers/hwmon/ltc2991.c @@ -225,8 +225,8 @@ static umode_t ltc2991_is_visible(const void *data, case hwmon_temp: switch (attr) { case hwmon_temp_input: - if (st->temp_en[channel] || - channel == LTC2991_T_INT_CH_NR) + if (channel == LTC2991_T_INT_CH_NR || + st->temp_en[channel]) return 0444; break; } @@ -284,7 +284,6 @@ static const struct regmap_config ltc2991_regmap_config = { static int ltc2991_init(struct ltc2991_state *st, struct device *dev) { - struct fwnode_handle *child; int ret; u32 val, addr; u8 v5_v8_reg_data = 0, v1_v4_reg_data = 0; @@ -294,17 +293,13 @@ static int ltc2991_init(struct ltc2991_state *st, struct device *dev) return dev_err_probe(dev, ret, "failed to enable regulator\n"); - device_for_each_child_node(dev, child) { + device_for_each_child_node_scoped(dev, child) { ret = fwnode_property_read_u32(child, "reg", &addr); - if (ret < 0) { - fwnode_handle_put(child); + if (ret < 0) return ret; - } - if (addr > 3) { - fwnode_handle_put(child); + if (addr > 3) return -EINVAL; - } ret = fwnode_property_read_u32(child, "shunt-resistor-micro-ohms", diff --git a/drivers/hwmon/max16065.c b/drivers/hwmon/max16065.c index aa38c45adc09..7ce9a89f93a0 100644 --- a/drivers/hwmon/max16065.c +++ b/drivers/hwmon/max16065.c @@ -493,8 +493,6 @@ static const struct attribute_group max16065_max_group = { .is_visible = max16065_secondary_is_visible, }; -static const struct i2c_device_id max16065_id[]; - static int max16065_probe(struct i2c_client *client) { struct i2c_adapter *adapter = client->adapter; @@ -505,7 +503,7 @@ static int max16065_probe(struct i2c_client *client) bool have_secondary; /* true if chip has secondary limits */ bool secondary_is_max = false; /* secondary limits reflect max */ int groups = 0; - const struct i2c_device_id *id = i2c_match_id(max16065_id, client); + enum chips chip = (uintptr_t)i2c_get_match_data(client); if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_READ_WORD_DATA)) @@ -518,9 +516,9 @@ static int max16065_probe(struct i2c_client *client) data->client = client; mutex_init(&data->update_lock); - data->num_adc = max16065_num_adc[id->driver_data]; - data->have_current = max16065_have_current[id->driver_data]; - have_secondary = max16065_have_secondary[id->driver_data]; + data->num_adc = max16065_num_adc[chip]; + data->have_current = max16065_have_current[chip]; + have_secondary = max16065_have_secondary[chip]; if (have_secondary) { val = i2c_smbus_read_byte_data(client, MAX16065_SW_ENABLE); diff --git a/drivers/hwmon/max1668.c b/drivers/hwmon/max1668.c index c4a02edefbee..9fc583ebb11b 100644 --- a/drivers/hwmon/max1668.c +++ b/drivers/hwmon/max1668.c @@ -391,8 +391,6 @@ static int max1668_detect(struct i2c_client *client, return 0; } -static const struct i2c_device_id max1668_id[]; - static int max1668_probe(struct i2c_client *client) { struct i2c_adapter *adapter = client->adapter; @@ -408,7 +406,7 @@ static int max1668_probe(struct i2c_client *client) return -ENOMEM; data->client = client; - data->type = i2c_match_id(max1668_id, client)->driver_data; + data->type = (uintptr_t)i2c_get_match_data(client); mutex_init(&data->update_lock); /* sysfs hooks */ diff --git a/drivers/hwmon/max31827.c b/drivers/hwmon/max31827.c index f8a13b30f100..48e8f8ba4d05 100644 --- a/drivers/hwmon/max31827.c +++ b/drivers/hwmon/max31827.c @@ -24,6 +24,7 @@ #define MAX31827_CONFIGURATION_1SHOT_MASK BIT(0) #define MAX31827_CONFIGURATION_CNV_RATE_MASK GENMASK(3, 1) +#define MAX31827_CONFIGURATION_PEC_EN_MASK BIT(4) #define MAX31827_CONFIGURATION_TIMEOUT_MASK BIT(5) #define MAX31827_CONFIGURATION_RESOLUTION_MASK GENMASK(7, 6) #define MAX31827_CONFIGURATION_ALRM_POL_MASK BIT(8) @@ -46,6 +47,11 @@ #define MAX31827_M_DGR_TO_16_BIT(x) (((x) << 4) / 1000) #define MAX31827_DEVICE_ENABLE(x) ((x) ? 0xA : 0x0) +/* + * The enum passed in the .data pointer of struct of_device_id must + * start with a value != 0 since that is a requirement for using + * device_get_match_data(). + */ enum chips { max31827 = 1, max31828, max31829 }; enum max31827_cnv { @@ -382,7 +388,8 @@ static int max31827_write(struct device *dev, enum hwmon_sensor_types type, } case hwmon_chip: - if (attr == hwmon_chip_update_interval) { + switch (attr) { + case hwmon_chip_update_interval: if (!st->enable) return -EINVAL; @@ -410,14 +417,18 @@ static int max31827_write(struct device *dev, enum hwmon_sensor_types type, return ret; st->update_interval = val; - } - break; + return 0; + case hwmon_chip_pec: + return regmap_update_bits(st->regmap, MAX31827_CONFIGURATION_REG, + MAX31827_CONFIGURATION_PEC_EN_MASK, + val ? MAX31827_CONFIGURATION_PEC_EN_MASK : 0); + default: + return -EOPNOTSUPP; + } default: return -EOPNOTSUPP; } - - return 0; } static ssize_t temp1_resolution_show(struct device *dev, @@ -583,7 +594,7 @@ static const struct hwmon_channel_info *max31827_info[] = { HWMON_T_MIN_HYST | HWMON_T_MIN_ALARM | HWMON_T_MAX | HWMON_T_MAX_HYST | HWMON_T_MAX_ALARM), - HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL), + HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL | HWMON_C_PEC), NULL, }; diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c index cbb595fe47aa..f54720d3d2ce 100644 --- a/drivers/hwmon/max6639.c +++ b/drivers/hwmon/max6639.c @@ -21,6 +21,7 @@ #include <linux/mutex.h> #include <linux/platform_data/max6639.h> #include <linux/regmap.h> +#include <linux/util_macros.h> /* Addresses to scan */ static const unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END }; @@ -55,13 +56,17 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END }; #define MAX6639_GCONFIG_PWM_FREQ_HI 0x08 #define MAX6639_FAN_CONFIG1_PWM 0x80 - +#define MAX6639_FAN_CONFIG3_FREQ_MASK 0x03 #define MAX6639_FAN_CONFIG3_THERM_FULL_SPEED 0x40 #define MAX6639_NUM_CHANNELS 2 static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 }; +/* Supported PWM frequency */ +static const unsigned int freq_table[] = { 20, 33, 50, 100, 5000, 8333, 12500, + 25000 }; + #define FAN_FROM_REG(val, rpm_range) ((val) == 0 || (val) == 255 ? \ 0 : (rpm_ranges[rpm_range] * 30) / (val)) #define TEMP_LIMIT_TO_REG(val) clamp_val((val) / 1000, 0, 255) @@ -71,21 +76,19 @@ static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 }; */ struct max6639_data { struct regmap *regmap; + struct mutex update_lock; /* Register values initialized only once */ - u8 ppr; /* Pulses per rotation 0..3 for 1..4 ppr */ - u8 rpm_range; /* Index in above rpm_ranges table */ + u8 ppr[MAX6639_NUM_CHANNELS]; /* Pulses per rotation 0..3 for 1..4 ppr */ + u8 rpm_range[MAX6639_NUM_CHANNELS]; /* Index in above rpm_ranges table */ /* Optional regulator for FAN supply */ struct regulator *reg; }; -static ssize_t temp_input_show(struct device *dev, - struct device_attribute *dev_attr, char *buf) +static int max6639_temp_read_input(struct device *dev, int channel, long *temp) { - long temp; struct max6639_data *data = dev_get_drvdata(dev); - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); unsigned int val; int res; @@ -93,251 +96,444 @@ static ssize_t temp_input_show(struct device *dev, * Lock isn't needed as MAX6639_REG_TEMP wpnt change for at least 250ms after reading * MAX6639_REG_TEMP_EXT */ - res = regmap_read(data->regmap, MAX6639_REG_TEMP_EXT(attr->index), &val); + res = regmap_read(data->regmap, MAX6639_REG_TEMP_EXT(channel), &val); if (res < 0) return res; - temp = val >> 5; - res = regmap_read(data->regmap, MAX6639_REG_TEMP(attr->index), &val); + *temp = val >> 5; + res = regmap_read(data->regmap, MAX6639_REG_TEMP(channel), &val); if (res < 0) return res; - temp |= val << 3; - temp *= 125; + *temp |= val << 3; + *temp *= 125; - return sprintf(buf, "%ld\n", temp); + return 0; } -static ssize_t temp_fault_show(struct device *dev, - struct device_attribute *dev_attr, char *buf) +static int max6639_temp_read_fault(struct device *dev, int channel, long *fault) { struct max6639_data *data = dev_get_drvdata(dev); - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); unsigned int val; int res; - res = regmap_read(data->regmap, MAX6639_REG_TEMP_EXT(attr->index), &val); + res = regmap_read(data->regmap, MAX6639_REG_TEMP_EXT(channel), &val); if (res < 0) return res; - return sprintf(buf, "%d\n", val & 1); + *fault = val & 1; + + return 0; } -static ssize_t temp_max_show(struct device *dev, - struct device_attribute *dev_attr, char *buf) +static int max6639_temp_read_max(struct device *dev, int channel, long *max) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); struct max6639_data *data = dev_get_drvdata(dev); unsigned int val; int res; - res = regmap_read(data->regmap, MAX6639_REG_THERM_LIMIT(attr->index), &val); + res = regmap_read(data->regmap, MAX6639_REG_THERM_LIMIT(channel), &val); if (res < 0) return res; - return sprintf(buf, "%d\n", (val * 1000)); + *max = (long)val * 1000; + + return 0; } -static ssize_t temp_max_store(struct device *dev, - struct device_attribute *dev_attr, - const char *buf, size_t count) +static int max6639_temp_read_crit(struct device *dev, int channel, long *crit) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); struct max6639_data *data = dev_get_drvdata(dev); - unsigned long val; + unsigned int val; int res; - res = kstrtoul(buf, 10, &val); - if (res) + res = regmap_read(data->regmap, MAX6639_REG_ALERT_LIMIT(channel), &val); + if (res < 0) return res; - regmap_write(data->regmap, MAX6639_REG_THERM_LIMIT(attr->index), - TEMP_LIMIT_TO_REG(val)); - return count; + *crit = (long)val * 1000; + + return 0; } -static ssize_t temp_crit_show(struct device *dev, - struct device_attribute *dev_attr, char *buf) +static int max6639_temp_read_emergency(struct device *dev, int channel, long *emerg) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); struct max6639_data *data = dev_get_drvdata(dev); unsigned int val; int res; - res = regmap_read(data->regmap, MAX6639_REG_ALERT_LIMIT(attr->index), &val); + res = regmap_read(data->regmap, MAX6639_REG_OT_LIMIT(channel), &val); if (res < 0) return res; - return sprintf(buf, "%d\n", (val * 1000)); + *emerg = (long)val * 1000; + + return 0; } -static ssize_t temp_crit_store(struct device *dev, - struct device_attribute *dev_attr, - const char *buf, size_t count) +static int max6639_get_status(struct device *dev, unsigned int *status) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); struct max6639_data *data = dev_get_drvdata(dev); - unsigned long val; + unsigned int val; int res; - res = kstrtoul(buf, 10, &val); - if (res) + res = regmap_read(data->regmap, MAX6639_REG_STATUS, &val); + if (res < 0) return res; - regmap_write(data->regmap, MAX6639_REG_ALERT_LIMIT(attr->index), - TEMP_LIMIT_TO_REG(val)); - return count; + *status = val; + + return 0; } -static ssize_t temp_emergency_show(struct device *dev, - struct device_attribute *dev_attr, - char *buf) +static int max6639_temp_set_max(struct max6639_data *data, int channel, long val) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); - struct max6639_data *data = dev_get_drvdata(dev); - unsigned int val; int res; - res = regmap_read(data->regmap, MAX6639_REG_OT_LIMIT(attr->index), &val); - if (res < 0) - return res; - - return sprintf(buf, "%d\n", (val * 1000)); + res = regmap_write(data->regmap, MAX6639_REG_THERM_LIMIT(channel), + TEMP_LIMIT_TO_REG(val)); + return res; } -static ssize_t temp_emergency_store(struct device *dev, - struct device_attribute *dev_attr, - const char *buf, size_t count) +static int max6639_temp_set_crit(struct max6639_data *data, int channel, long val) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); - struct max6639_data *data = dev_get_drvdata(dev); - unsigned long val; int res; - res = kstrtoul(buf, 10, &val); - if (res) - return res; + res = regmap_write(data->regmap, MAX6639_REG_ALERT_LIMIT(channel), TEMP_LIMIT_TO_REG(val)); - regmap_write(data->regmap, MAX6639_REG_OT_LIMIT(attr->index), TEMP_LIMIT_TO_REG(val)); + return res; +} - return count; +static int max6639_temp_set_emergency(struct max6639_data *data, int channel, long val) +{ + int res; + + res = regmap_write(data->regmap, MAX6639_REG_OT_LIMIT(channel), TEMP_LIMIT_TO_REG(val)); + + return res; } -static ssize_t pwm_show(struct device *dev, struct device_attribute *dev_attr, - char *buf) +static int max6639_read_fan(struct device *dev, u32 attr, int channel, + long *fan_val) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); struct max6639_data *data = dev_get_drvdata(dev); unsigned int val; int res; - res = regmap_read(data->regmap, MAX6639_REG_TARGTDUTY(attr->index), &val); - if (res < 0) - return res; + switch (attr) { + case hwmon_fan_input: + res = regmap_read(data->regmap, MAX6639_REG_FAN_CNT(channel), &val); + if (res < 0) + return res; + *fan_val = FAN_FROM_REG(val, data->rpm_range[channel]); + return 0; + case hwmon_fan_fault: + res = max6639_get_status(dev, &val); + if (res < 0) + return res; + *fan_val = !!(val & BIT(1 - channel)); + return 0; + case hwmon_fan_pulses: + *fan_val = data->ppr[channel]; + return 0; + default: + return -EOPNOTSUPP; + } +} - return sprintf(buf, "%d\n", val * 255 / 120); +static int max6639_set_ppr(struct max6639_data *data, int channel, u8 ppr) +{ + /* Decrement the PPR value and shift left by 6 to match the register format */ + return regmap_write(data->regmap, MAX6639_REG_FAN_PPR(channel), ppr-- << 6); } -static ssize_t pwm_store(struct device *dev, - struct device_attribute *dev_attr, const char *buf, - size_t count) +static int max6639_write_fan(struct device *dev, u32 attr, int channel, + long val) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); struct max6639_data *data = dev_get_drvdata(dev); - unsigned long val; - int res; + int err; - res = kstrtoul(buf, 10, &val); - if (res) - return res; + switch (attr) { + case hwmon_fan_pulses: + if (val <= 0 || val > 4) + return -EINVAL; - val = clamp_val(val, 0, 255); + mutex_lock(&data->update_lock); + /* Set Fan pulse per revolution */ + err = max6639_set_ppr(data, channel, val); + if (err < 0) { + mutex_unlock(&data->update_lock); + return err; + } + data->ppr[channel] = val; - regmap_write(data->regmap, MAX6639_REG_TARGTDUTY(attr->index), val * 120 / 255); + mutex_unlock(&data->update_lock); + return 0; + default: + return -EOPNOTSUPP; + } +} - return count; +static umode_t max6639_fan_is_visible(const void *_data, u32 attr, int channel) +{ + switch (attr) { + case hwmon_fan_input: + case hwmon_fan_fault: + return 0444; + case hwmon_fan_pulses: + return 0644; + default: + return 0; + } } -static ssize_t fan_input_show(struct device *dev, - struct device_attribute *dev_attr, char *buf) +static int max6639_read_pwm(struct device *dev, u32 attr, int channel, + long *pwm_val) { struct max6639_data *data = dev_get_drvdata(dev); - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); unsigned int val; int res; + u8 i; + + switch (attr) { + case hwmon_pwm_input: + res = regmap_read(data->regmap, MAX6639_REG_TARGTDUTY(channel), &val); + if (res < 0) + return res; + *pwm_val = val * 255 / 120; + return 0; + case hwmon_pwm_freq: + mutex_lock(&data->update_lock); + res = regmap_read(data->regmap, MAX6639_REG_FAN_CONFIG3(channel), &val); + if (res < 0) { + mutex_unlock(&data->update_lock); + return res; + } + i = val & MAX6639_FAN_CONFIG3_FREQ_MASK; - res = regmap_read(data->regmap, MAX6639_REG_FAN_CNT(attr->index), &val); - if (res < 0) - return res; + res = regmap_read(data->regmap, MAX6639_REG_GCONFIG, &val); + if (res < 0) { + mutex_unlock(&data->update_lock); + return res; + } + + if (val & MAX6639_GCONFIG_PWM_FREQ_HI) + i |= 0x4; + i &= 0x7; + *pwm_val = freq_table[i]; - return sprintf(buf, "%d\n", FAN_FROM_REG(val, data->rpm_range)); + mutex_unlock(&data->update_lock); + return 0; + default: + return -EOPNOTSUPP; + } } -static ssize_t alarm_show(struct device *dev, - struct device_attribute *dev_attr, char *buf) +static int max6639_write_pwm(struct device *dev, u32 attr, int channel, + long val) { struct max6639_data *data = dev_get_drvdata(dev); - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); - unsigned int val; + int err; + u8 i; + + switch (attr) { + case hwmon_pwm_input: + if (val < 0 || val > 255) + return -EINVAL; + err = regmap_write(data->regmap, MAX6639_REG_TARGTDUTY(channel), + val * 120 / 255); + return err; + case hwmon_pwm_freq: + val = clamp_val(val, 0, 25000); + + i = find_closest(val, freq_table, ARRAY_SIZE(freq_table)); + + mutex_lock(&data->update_lock); + err = regmap_update_bits(data->regmap, MAX6639_REG_FAN_CONFIG3(channel), + MAX6639_FAN_CONFIG3_FREQ_MASK, i); + if (err < 0) { + mutex_unlock(&data->update_lock); + return err; + } + + if (i >> 2) + err = regmap_set_bits(data->regmap, MAX6639_REG_GCONFIG, + MAX6639_GCONFIG_PWM_FREQ_HI); + else + err = regmap_clear_bits(data->regmap, MAX6639_REG_GCONFIG, + MAX6639_GCONFIG_PWM_FREQ_HI); + + mutex_unlock(&data->update_lock); + return err; + default: + return -EOPNOTSUPP; + } +} + +static umode_t max6639_pwm_is_visible(const void *_data, u32 attr, int channel) +{ + switch (attr) { + case hwmon_pwm_input: + case hwmon_pwm_freq: + return 0644; + default: + return 0; + } +} + +static int max6639_read_temp(struct device *dev, u32 attr, int channel, + long *val) +{ + unsigned int status; int res; - res = regmap_read(data->regmap, MAX6639_REG_STATUS, &val); - if (res < 0) + switch (attr) { + case hwmon_temp_input: + res = max6639_temp_read_input(dev, channel, val); return res; + case hwmon_temp_fault: + res = max6639_temp_read_fault(dev, channel, val); + return res; + case hwmon_temp_max: + res = max6639_temp_read_max(dev, channel, val); + return res; + case hwmon_temp_crit: + res = max6639_temp_read_crit(dev, channel, val); + return res; + case hwmon_temp_emergency: + res = max6639_temp_read_emergency(dev, channel, val); + return res; + case hwmon_temp_max_alarm: + res = max6639_get_status(dev, &status); + if (res < 0) + return res; + *val = !!(status & BIT(3 - channel)); + return 0; + case hwmon_temp_crit_alarm: + res = max6639_get_status(dev, &status); + if (res < 0) + return res; + *val = !!(status & BIT(7 - channel)); + return 0; + case hwmon_temp_emergency_alarm: + res = max6639_get_status(dev, &status); + if (res < 0) + return res; + *val = !!(status & BIT(5 - channel)); + return 0; + default: + return -EOPNOTSUPP; + } +} - return sprintf(buf, "%d\n", !!(val & (1 << attr->index))); +static int max6639_write_temp(struct device *dev, u32 attr, int channel, + long val) +{ + struct max6639_data *data = dev_get_drvdata(dev); + + switch (attr) { + case hwmon_temp_max: + return max6639_temp_set_max(data, channel, val); + case hwmon_temp_crit: + return max6639_temp_set_crit(data, channel, val); + case hwmon_temp_emergency: + return max6639_temp_set_emergency(data, channel, val); + default: + return -EOPNOTSUPP; + } } -static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0); -static SENSOR_DEVICE_ATTR_RO(temp2_input, temp_input, 1); -static SENSOR_DEVICE_ATTR_RO(temp1_fault, temp_fault, 0); -static SENSOR_DEVICE_ATTR_RO(temp2_fault, temp_fault, 1); -static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0); -static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1); -static SENSOR_DEVICE_ATTR_RW(temp1_crit, temp_crit, 0); -static SENSOR_DEVICE_ATTR_RW(temp2_crit, temp_crit, 1); -static SENSOR_DEVICE_ATTR_RW(temp1_emergency, temp_emergency, 0); -static SENSOR_DEVICE_ATTR_RW(temp2_emergency, temp_emergency, 1); -static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0); -static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1); -static SENSOR_DEVICE_ATTR_RO(fan1_input, fan_input, 0); -static SENSOR_DEVICE_ATTR_RO(fan2_input, fan_input, 1); -static SENSOR_DEVICE_ATTR_RO(fan1_fault, alarm, 1); -static SENSOR_DEVICE_ATTR_RO(fan2_fault, alarm, 0); -static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 3); -static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 2); -static SENSOR_DEVICE_ATTR_RO(temp1_crit_alarm, alarm, 7); -static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, 6); -static SENSOR_DEVICE_ATTR_RO(temp1_emergency_alarm, alarm, 5); -static SENSOR_DEVICE_ATTR_RO(temp2_emergency_alarm, alarm, 4); - - -static struct attribute *max6639_attrs[] = { - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp2_input.dev_attr.attr, - &sensor_dev_attr_temp1_fault.dev_attr.attr, - &sensor_dev_attr_temp2_fault.dev_attr.attr, - &sensor_dev_attr_temp1_max.dev_attr.attr, - &sensor_dev_attr_temp2_max.dev_attr.attr, - &sensor_dev_attr_temp1_crit.dev_attr.attr, - &sensor_dev_attr_temp2_crit.dev_attr.attr, - &sensor_dev_attr_temp1_emergency.dev_attr.attr, - &sensor_dev_attr_temp2_emergency.dev_attr.attr, - &sensor_dev_attr_pwm1.dev_attr.attr, - &sensor_dev_attr_pwm2.dev_attr.attr, - &sensor_dev_attr_fan1_input.dev_attr.attr, - &sensor_dev_attr_fan2_input.dev_attr.attr, - &sensor_dev_attr_fan1_fault.dev_attr.attr, - &sensor_dev_attr_fan2_fault.dev_attr.attr, - &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, - &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, - &sensor_dev_attr_temp1_emergency_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_emergency_alarm.dev_attr.attr, +static umode_t max6639_temp_is_visible(const void *_data, u32 attr, int channel) +{ + switch (attr) { + case hwmon_temp_input: + case hwmon_temp_fault: + case hwmon_temp_max_alarm: + case hwmon_temp_crit_alarm: + case hwmon_temp_emergency_alarm: + return 0444; + case hwmon_temp_max: + case hwmon_temp_crit: + case hwmon_temp_emergency: + return 0644; + default: + return 0; + } +} + +static int max6639_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + switch (type) { + case hwmon_fan: + return max6639_read_fan(dev, attr, channel, val); + case hwmon_pwm: + return max6639_read_pwm(dev, attr, channel, val); + case hwmon_temp: + return max6639_read_temp(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } +} + +static int max6639_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + switch (type) { + case hwmon_fan: + return max6639_write_fan(dev, attr, channel, val); + case hwmon_pwm: + return max6639_write_pwm(dev, attr, channel, val); + case hwmon_temp: + return max6639_write_temp(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } +} + +static umode_t max6639_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_fan: + return max6639_fan_is_visible(data, attr, channel); + case hwmon_pwm: + return max6639_pwm_is_visible(data, attr, channel); + case hwmon_temp: + return max6639_temp_is_visible(data, attr, channel); + default: + return 0; + } +} + +static const struct hwmon_channel_info * const max6639_info[] = { + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_PULSES, + HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_PULSES), + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT | HWMON_PWM_FREQ, + HWMON_PWM_INPUT | HWMON_PWM_FREQ), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_MAX | HWMON_T_MAX_ALARM | + HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_EMERGENCY | + HWMON_T_EMERGENCY_ALARM, + HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_MAX | HWMON_T_MAX_ALARM | + HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_EMERGENCY | + HWMON_T_EMERGENCY_ALARM), NULL }; -ATTRIBUTE_GROUPS(max6639); + +static const struct hwmon_ops max6639_hwmon_ops = { + .is_visible = max6639_is_visible, + .read = max6639_read, + .write = max6639_write, +}; + +static const struct hwmon_chip_info max6639_chip_info = { + .ops = &max6639_hwmon_ops, + .info = max6639_info, +}; /* * returns respective index in rpm_ranges table @@ -355,11 +551,6 @@ static int rpm_range_to_reg(int range) return 1; /* default: 4000 RPM */ } -static int max6639_set_ppr(struct max6639_data *data, u8 channel, u8 ppr) -{ - return regmap_write(data->regmap, MAX6639_REG_FAN_PPR(channel), ppr << 6); -} - static int max6639_init_client(struct i2c_client *client, struct max6639_data *data) { @@ -380,30 +571,34 @@ static int max6639_init_client(struct i2c_client *client, ppr = max6639_info->ppr; else ppr = 2; - ppr -= 1; + + data->ppr[0] = ppr; + data->ppr[1] = ppr; if (max6639_info) rpm_range = rpm_range_to_reg(max6639_info->rpm_range); - data->rpm_range = rpm_range; + data->rpm_range[0] = rpm_range; + data->rpm_range[1] = rpm_range; for (i = 0; i < MAX6639_NUM_CHANNELS; i++) { - /* Set Fan pulse per revolution */ - err = max6639_set_ppr(data, i, ppr); + err = max6639_set_ppr(data, i, data->ppr[i]); if (err) return err; /* Fans config PWM, RPM */ err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG1(i), - MAX6639_FAN_CONFIG1_PWM | rpm_range); + MAX6639_FAN_CONFIG1_PWM | data->rpm_range[i]); if (err) return err; /* Fans PWM polarity high by default */ - if (max6639_info && max6639_info->pwm_polarity == 0) - err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG2a(i), 0x00); - else - err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG2a(i), 0x02); + if (max6639_info) { + if (max6639_info->pwm_polarity == 0) + err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG2a(i), 0x00); + else + err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG2a(i), 0x02); + } if (err) return err; @@ -529,14 +724,17 @@ static int max6639_probe(struct i2c_client *client) } } + mutex_init(&data->update_lock); + /* Initialize the max6639 chip */ err = max6639_init_client(client, data); if (err < 0) return err; - hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, - data, - max6639_groups); + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, + data, &max6639_chip_info, + NULL); + return PTR_ERR_OR_ZERO(hwmon_dev); } diff --git a/drivers/hwmon/max6642.c b/drivers/hwmon/max6642.c deleted file mode 100644 index 9302ab233910..000000000000 --- a/drivers/hwmon/max6642.c +++ /dev/null @@ -1,314 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Driver for +/-1 degree C, SMBus-Compatible Remote/Local Temperature Sensor - * with Overtemperature Alarm - * - * Copyright (C) 2011 AppearTV AS - * - * Derived from: - * - * Based on the max1619 driver. - * Copyright (C) 2003-2004 Oleksij Rempel <bug-track@fisher-privat.net> - * Jean Delvare <jdelvare@suse.de> - * - * The MAX6642 is a sensor chip made by Maxim. - * It reports up to two temperatures (its own plus up to - * one external one). Complete datasheet can be - * obtained from Maxim's website at: - * http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf - */ - - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/hwmon.h> -#include <linux/hwmon-sysfs.h> -#include <linux/err.h> -#include <linux/mutex.h> -#include <linux/sysfs.h> - -static const unsigned short normal_i2c[] = { - 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; - -/* - * The MAX6642 registers - */ - -#define MAX6642_REG_R_MAN_ID 0xFE -#define MAX6642_REG_R_CONFIG 0x03 -#define MAX6642_REG_W_CONFIG 0x09 -#define MAX6642_REG_R_STATUS 0x02 -#define MAX6642_REG_R_LOCAL_TEMP 0x00 -#define MAX6642_REG_R_LOCAL_TEMPL 0x11 -#define MAX6642_REG_R_LOCAL_HIGH 0x05 -#define MAX6642_REG_W_LOCAL_HIGH 0x0B -#define MAX6642_REG_R_REMOTE_TEMP 0x01 -#define MAX6642_REG_R_REMOTE_TEMPL 0x10 -#define MAX6642_REG_R_REMOTE_HIGH 0x07 -#define MAX6642_REG_W_REMOTE_HIGH 0x0D - -/* - * Conversions - */ - -static int temp_from_reg10(int val) -{ - return val * 250; -} - -static int temp_from_reg(int val) -{ - return val * 1000; -} - -static int temp_to_reg(int val) -{ - return val / 1000; -} - -/* - * Client data (each client gets its own) - */ - -struct max6642_data { - struct i2c_client *client; - struct mutex update_lock; - bool valid; /* zero until following fields are valid */ - unsigned long last_updated; /* in jiffies */ - - /* registers values */ - u16 temp_input[2]; /* local/remote */ - u16 temp_high[2]; /* local/remote */ - u8 alarms; -}; - -/* - * Real code - */ - -static void max6642_init_client(struct max6642_data *data, - struct i2c_client *client) -{ - u8 config; - - /* - * Start the conversions. - */ - config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG); - if (config & 0x40) - i2c_smbus_write_byte_data(client, MAX6642_REG_W_CONFIG, - config & 0xBF); /* run */ - - data->temp_high[0] = i2c_smbus_read_byte_data(client, - MAX6642_REG_R_LOCAL_HIGH); - data->temp_high[1] = i2c_smbus_read_byte_data(client, - MAX6642_REG_R_REMOTE_HIGH); -} - -/* Return 0 if detection is successful, -ENODEV otherwise */ -static int max6642_detect(struct i2c_client *client, - struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = client->adapter; - u8 reg_config, reg_status, man_id; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -ENODEV; - - /* identification */ - man_id = i2c_smbus_read_byte_data(client, MAX6642_REG_R_MAN_ID); - if (man_id != 0x4D) - return -ENODEV; - - /* sanity check */ - if (i2c_smbus_read_byte_data(client, 0x04) != 0x4D - || i2c_smbus_read_byte_data(client, 0x06) != 0x4D - || i2c_smbus_read_byte_data(client, 0xff) != 0x4D) - return -ENODEV; - - /* - * We read the config and status register, the 4 lower bits in the - * config register should be zero and bit 5, 3, 1 and 0 should be - * zero in the status register. - */ - reg_config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG); - if ((reg_config & 0x0f) != 0x00) - return -ENODEV; - - /* in between, another round of sanity checks */ - if (i2c_smbus_read_byte_data(client, 0x04) != reg_config - || i2c_smbus_read_byte_data(client, 0x06) != reg_config - || i2c_smbus_read_byte_data(client, 0xff) != reg_config) - return -ENODEV; - - reg_status = i2c_smbus_read_byte_data(client, MAX6642_REG_R_STATUS); - if ((reg_status & 0x2b) != 0x00) - return -ENODEV; - - strscpy(info->type, "max6642", I2C_NAME_SIZE); - - return 0; -} - -static struct max6642_data *max6642_update_device(struct device *dev) -{ - struct max6642_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - u16 val, tmp; - - mutex_lock(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { - dev_dbg(dev, "Updating max6642 data.\n"); - val = i2c_smbus_read_byte_data(client, - MAX6642_REG_R_LOCAL_TEMPL); - tmp = (val >> 6) & 3; - val = i2c_smbus_read_byte_data(client, - MAX6642_REG_R_LOCAL_TEMP); - val = (val << 2) | tmp; - data->temp_input[0] = val; - val = i2c_smbus_read_byte_data(client, - MAX6642_REG_R_REMOTE_TEMPL); - tmp = (val >> 6) & 3; - val = i2c_smbus_read_byte_data(client, - MAX6642_REG_R_REMOTE_TEMP); - val = (val << 2) | tmp; - data->temp_input[1] = val; - data->alarms = i2c_smbus_read_byte_data(client, - MAX6642_REG_R_STATUS); - - data->last_updated = jiffies; - data->valid = true; - } - - mutex_unlock(&data->update_lock); - - return data; -} - -/* - * Sysfs stuff - */ - -static ssize_t temp_max10_show(struct device *dev, - struct device_attribute *dev_attr, char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); - struct max6642_data *data = max6642_update_device(dev); - - return sprintf(buf, "%d\n", - temp_from_reg10(data->temp_input[attr->index])); -} - -static ssize_t temp_max_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr); - struct max6642_data *data = max6642_update_device(dev); - - return sprintf(buf, "%d\n", temp_from_reg(data->temp_high[attr2->nr])); -} - -static ssize_t temp_max_store(struct device *dev, - struct device_attribute *attr, const char *buf, - size_t count) -{ - struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr); - struct max6642_data *data = dev_get_drvdata(dev); - unsigned long val; - int err; - - err = kstrtoul(buf, 10, &val); - if (err < 0) - return err; - - mutex_lock(&data->update_lock); - data->temp_high[attr2->nr] = clamp_val(temp_to_reg(val), 0, 255); - i2c_smbus_write_byte_data(data->client, attr2->index, - data->temp_high[attr2->nr]); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - int bitnr = to_sensor_dev_attr(attr)->index; - struct max6642_data *data = max6642_update_device(dev); - return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); -} - -static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_max10, 0); -static SENSOR_DEVICE_ATTR_RO(temp2_input, temp_max10, 1); -static SENSOR_DEVICE_ATTR_2_RW(temp1_max, temp_max, 0, - MAX6642_REG_W_LOCAL_HIGH); -static SENSOR_DEVICE_ATTR_2_RW(temp2_max, temp_max, 1, - MAX6642_REG_W_REMOTE_HIGH); -static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 2); -static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 6); -static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 4); - -static struct attribute *max6642_attrs[] = { - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp2_input.dev_attr.attr, - &sensor_dev_attr_temp1_max.dev_attr.attr, - &sensor_dev_attr_temp2_max.dev_attr.attr, - - &sensor_dev_attr_temp2_fault.dev_attr.attr, - &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, - NULL -}; -ATTRIBUTE_GROUPS(max6642); - -static int max6642_probe(struct i2c_client *client) -{ - struct device *dev = &client->dev; - struct max6642_data *data; - struct device *hwmon_dev; - - data = devm_kzalloc(dev, sizeof(struct max6642_data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->client = client; - mutex_init(&data->update_lock); - - /* Initialize the MAX6642 chip */ - max6642_init_client(data, client); - - hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev, - client->name, data, - max6642_groups); - return PTR_ERR_OR_ZERO(hwmon_dev); -} - -/* - * Driver data (common to all clients) - */ - -static const struct i2c_device_id max6642_id[] = { - { "max6642" }, - { } -}; -MODULE_DEVICE_TABLE(i2c, max6642_id); - -static struct i2c_driver max6642_driver = { - .class = I2C_CLASS_HWMON, - .driver = { - .name = "max6642", - }, - .probe = max6642_probe, - .id_table = max6642_id, - .detect = max6642_detect, - .address_list = normal_i2c, -}; - -module_i2c_driver(max6642_driver); - -MODULE_AUTHOR("Per Dalen <per.dalen@appeartv.com>"); -MODULE_DESCRIPTION("MAX6642 sensor driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/max6697.c b/drivers/hwmon/max6697.c index d161ba0e7813..20981f9443dd 100644 --- a/drivers/hwmon/max6697.c +++ b/drivers/hwmon/max6697.c @@ -311,6 +311,7 @@ static ssize_t temp_store(struct device *dev, return ret; mutex_lock(&data->update_lock); + temp = clamp_val(temp, -1000000, 1000000); /* prevent underflow */ temp = DIV_ROUND_CLOSEST(temp, 1000) + data->temp_offset; temp = clamp_val(temp, 0, data->type == max6581 ? 255 : 127); data->temp[nr][index] = temp; @@ -428,14 +429,14 @@ static SENSOR_DEVICE_ATTR_RO(temp6_max_alarm, alarm, 20); static SENSOR_DEVICE_ATTR_RO(temp7_max_alarm, alarm, 21); static SENSOR_DEVICE_ATTR_RO(temp8_max_alarm, alarm, 23); -static SENSOR_DEVICE_ATTR_RO(temp1_crit_alarm, alarm, 14); +static SENSOR_DEVICE_ATTR_RO(temp1_crit_alarm, alarm, 15); static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, 8); static SENSOR_DEVICE_ATTR_RO(temp3_crit_alarm, alarm, 9); static SENSOR_DEVICE_ATTR_RO(temp4_crit_alarm, alarm, 10); static SENSOR_DEVICE_ATTR_RO(temp5_crit_alarm, alarm, 11); static SENSOR_DEVICE_ATTR_RO(temp6_crit_alarm, alarm, 12); static SENSOR_DEVICE_ATTR_RO(temp7_crit_alarm, alarm, 13); -static SENSOR_DEVICE_ATTR_RO(temp8_crit_alarm, alarm, 15); +static SENSOR_DEVICE_ATTR_RO(temp8_crit_alarm, alarm, 14); static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 1); static SENSOR_DEVICE_ATTR_RO(temp3_fault, alarm, 2); @@ -684,8 +685,6 @@ done: return 0; } -static const struct i2c_device_id max6697_id[]; - static int max6697_probe(struct i2c_client *client) { struct i2c_adapter *adapter = client->adapter; @@ -701,10 +700,7 @@ static int max6697_probe(struct i2c_client *client) if (!data) return -ENOMEM; - if (client->dev.of_node) - data->type = (uintptr_t)of_device_get_match_data(&client->dev); - else - data->type = i2c_match_id(max6697_id, client)->driver_data; + data->type = (uintptr_t)i2c_get_match_data(client); data->chip = &max6697_chip_data[data->type]; data->client = client; mutex_init(&data->update_lock); diff --git a/drivers/hwmon/mcp3021.c b/drivers/hwmon/mcp3021.c index 9814eaf24564..bcddf6804d3a 100644 --- a/drivers/hwmon/mcp3021.c +++ b/drivers/hwmon/mcp3021.c @@ -116,13 +116,12 @@ static const struct hwmon_chip_info mcp3021_chip_info = { .info = mcp3021_info, }; -static const struct i2c_device_id mcp3021_id[]; - static int mcp3021_probe(struct i2c_client *client) { struct mcp3021_data *data = NULL; struct device_node *np = client->dev.of_node; struct device *hwmon_dev; + enum chips type; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) return -ENODEV; @@ -149,7 +148,8 @@ static int mcp3021_probe(struct i2c_client *client) data->vdd = MCP3021_VDD_REF_DEFAULT; } - switch (i2c_match_id(mcp3021_id, client)->driver_data) { + type = (uintptr_t)i2c_get_match_data(client); + switch (type) { case mcp3021: data->sar_shift = MCP3021_SAR_SHIFT; data->sar_mask = MCP3021_SAR_MASK; diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c index 50a8b9c3f94d..7848198f8996 100644 --- a/drivers/hwmon/mr75203.c +++ b/drivers/hwmon/mr75203.c @@ -925,4 +925,5 @@ static struct platform_driver moortec_pvt_driver = { }; module_platform_driver(moortec_pvt_driver); +MODULE_DESCRIPTION("Moortec Semiconductor MR75203 PVT Controller driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/hwmon/nct6683.c b/drivers/hwmon/nct6683.c index 0d016fedb9c2..f71615e06a8f 100644 --- a/drivers/hwmon/nct6683.c +++ b/drivers/hwmon/nct6683.c @@ -1236,6 +1236,8 @@ static int nct6683_probe(struct platform_device *pdev) default: if (!force) return -ENODEV; + dev_warn(dev, "Enabling support for unknown customer ID 0x%04x\n", data->customer_id); + break; } nct6683_init_device(data); diff --git a/drivers/hwmon/nct6775-core.c b/drivers/hwmon/nct6775-core.c index 9fbab8f02334..934fed3dd586 100644 --- a/drivers/hwmon/nct6775-core.c +++ b/drivers/hwmon/nct6775-core.c @@ -2262,7 +2262,7 @@ store_temp_offset(struct device *dev, struct device_attribute *attr, if (err < 0) return err; - val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -128, 127); + val = DIV_ROUND_CLOSEST(clamp_val(val, -128000, 127000), 1000); mutex_lock(&data->update_lock); data->temp_offset[nr] = val; diff --git a/drivers/hwmon/nct6775.h b/drivers/hwmon/nct6775.h index d31e7a030216..296eff99d003 100644 --- a/drivers/hwmon/nct6775.h +++ b/drivers/hwmon/nct6775.h @@ -4,7 +4,7 @@ #include <linux/types.h> -enum kinds { nct6106 = 1, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792, +enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793, nct6795, nct6796, nct6797, nct6798, nct6799 }; enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 }; diff --git a/drivers/hwmon/nzxt-smart2.c b/drivers/hwmon/nzxt-smart2.c index 7aa586eb74be..df6fa72a6b59 100644 --- a/drivers/hwmon/nzxt-smart2.c +++ b/drivers/hwmon/nzxt-smart2.c @@ -799,6 +799,7 @@ static const struct hid_device_id nzxt_smart2_hid_id_table[] = { { HID_USB_DEVICE(0x1e71, 0x2010) }, /* NZXT RGB & Fan Controller */ { HID_USB_DEVICE(0x1e71, 0x2011) }, /* NZXT RGB & Fan Controller (6 RGB) */ { HID_USB_DEVICE(0x1e71, 0x2019) }, /* NZXT RGB & Fan Controller (6 RGB) */ + { HID_USB_DEVICE(0x1e71, 0x2020) }, /* NZXT RGB & Fan Controller (6 RGB) */ {}, }; diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 08e82c457356..a4f02cad92fd 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -337,6 +337,15 @@ config SENSORS_MP2888 This driver can also be built as a module. If so, the module will be called mp2888. +config SENSORS_MP2891 + tristate "MPS MP2891" + help + If you say yes here you get hardware monitoring support for MPS + MP2891 Dual Loop Digital Multi-Phase Controller. + + This driver can also be built as a module. If so, the module will + be called mp2891. + config SENSORS_MP2975 tristate "MPS MP2975" help @@ -346,6 +355,15 @@ config SENSORS_MP2975 This driver can also be built as a module. If so, the module will be called mp2975. +config SENSORS_MP2993 + tristate "MPS MP2993" + help + If you say yes here you get hardware monitoring support for MPS + MP2993 Dual Loop Digital Multi-Phase Controller. + + This driver can also be built as a module. If so, the module will + be called mp2993. + config SENSORS_MP2975_REGULATOR depends on SENSORS_MP2975 && REGULATOR bool "Regulator support for MPS MP2975" @@ -362,6 +380,15 @@ config SENSORS_MP5023 This driver can also be built as a module. If so, the module will be called mp5023. +config SENSORS_MP5920 + tristate "MPS MP5920" + help + If you say yes here you get hardware monitoring support for Monolithic + MP5920. + + This driver can also be built as a module. If so, the module will + be called mp5920. + config SENSORS_MP5990 tristate "MPS MP5990" help @@ -371,6 +398,15 @@ config SENSORS_MP5990 This driver can also be built as a module. If so, the module will be called mp5990. +config SENSORS_MP9941 + tristate "MPS MP9941" + help + If you say yes here you get hardware monitoring support for MPS + MP9941. + + This driver can also be built as a module. If so, the module will + be called mp9941. + config SENSORS_MPQ7932_REGULATOR bool "Regulator support for MPQ7932" depends on SENSORS_MPQ7932 && REGULATOR diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 2279b3327bbf..d00bcc758b97 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -36,9 +36,13 @@ obj-$(CONFIG_SENSORS_MAX34440) += max34440.o obj-$(CONFIG_SENSORS_MAX8688) += max8688.o obj-$(CONFIG_SENSORS_MP2856) += mp2856.o obj-$(CONFIG_SENSORS_MP2888) += mp2888.o +obj-$(CONFIG_SENSORS_MP2891) += mp2891.o obj-$(CONFIG_SENSORS_MP2975) += mp2975.o +obj-$(CONFIG_SENSORS_MP2993) += mp2993.o obj-$(CONFIG_SENSORS_MP5023) += mp5023.o +obj-$(CONFIG_SENSORS_MP5920) += mp5920.o obj-$(CONFIG_SENSORS_MP5990) += mp5990.o +obj-$(CONFIG_SENSORS_MP9941) += mp9941.o obj-$(CONFIG_SENSORS_MPQ7932) += mpq7932.o obj-$(CONFIG_SENSORS_MPQ8785) += mpq8785.o obj-$(CONFIG_SENSORS_PLI1209BC) += pli1209bc.o diff --git a/drivers/hwmon/pmbus/lm25066.c b/drivers/hwmon/pmbus/lm25066.c index cfffa4cdc0df..c36c124d1a2d 100644 --- a/drivers/hwmon/pmbus/lm25066.c +++ b/drivers/hwmon/pmbus/lm25066.c @@ -17,7 +17,7 @@ #include <linux/of.h> #include "pmbus.h" -enum chips { lm25056 = 1, lm25066, lm5064, lm5066, lm5066i }; +enum chips { lm25056, lm25066, lm5064, lm5066, lm5066i }; #define LM25066_READ_VAUX 0xd0 #define LM25066_MFR_READ_IIN 0xd1 diff --git a/drivers/hwmon/pmbus/ltc4286.c b/drivers/hwmon/pmbus/ltc4286.c index 9e7ceeb7e789..aabd0bcdfeee 100644 --- a/drivers/hwmon/pmbus/ltc4286.c +++ b/drivers/hwmon/pmbus/ltc4286.c @@ -58,8 +58,8 @@ static struct pmbus_driver_info ltc4286_info = { }; static const struct i2c_device_id ltc4286_id[] = { - { "ltc4286", 0 }, - { "ltc4287", 1 }, + { "ltc4286", }, + { "ltc4287", }, {} }; MODULE_DEVICE_TABLE(i2c, ltc4286_id); diff --git a/drivers/hwmon/pmbus/mp2856.c b/drivers/hwmon/pmbus/mp2856.c index 6969350f5d7d..41bb86667091 100644 --- a/drivers/hwmon/pmbus/mp2856.c +++ b/drivers/hwmon/pmbus/mp2856.c @@ -46,7 +46,7 @@ #define MP2856_PAGE_NUM 2 -enum chips { mp2856 = 1, mp2857 }; +enum chips { mp2856, mp2857 }; static const int mp2856_max_phases[][MP2856_PAGE_NUM] = { [mp2856] = { MP2856_MAX_PHASE_RAIL1, MP2856_MAX_PHASE_RAIL2 }, @@ -66,7 +66,6 @@ struct mp2856_data { int vout_format[MP2856_PAGE_NUM]; int curr_sense_gain[MP2856_PAGE_NUM]; int max_phases[MP2856_PAGE_NUM]; - enum chips chip_id; }; #define to_mp2856_data(x) container_of(x, struct mp2856_data, info) @@ -397,6 +396,7 @@ static int mp2856_probe(struct i2c_client *client) { struct pmbus_driver_info *info; struct mp2856_data *data; + enum chips chip_id; int ret; data = devm_kzalloc(&client->dev, sizeof(struct mp2856_data), @@ -404,9 +404,9 @@ static int mp2856_probe(struct i2c_client *client) if (!data) return -ENOMEM; - data->chip_id = (enum chips)(uintptr_t)i2c_get_match_data(client); + chip_id = (kernel_ulong_t)i2c_get_match_data(client); - memcpy(data->max_phases, mp2856_max_phases[data->chip_id], + memcpy(data->max_phases, mp2856_max_phases[chip_id], sizeof(data->max_phases)); memcpy(&data->info, &mp2856_info, sizeof(*info)); diff --git a/drivers/hwmon/pmbus/mp2891.c b/drivers/hwmon/pmbus/mp2891.c new file mode 100644 index 000000000000..bb28b15a9103 --- /dev/null +++ b/drivers/hwmon/pmbus/mp2891.c @@ -0,0 +1,600 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for MPS Multi-phase Digital VR Controllers(MP2891) + */ + +#include <linux/bitfield.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include "pmbus.h" + +/* + * Vender specific registers, the register MFR_SVI3_IOUT_PRT(0x65), + * MFR_VOUT_LOOP_CTRL(0xBD), READ_PIN_EST(0x94)and READ_IIN_EST(0x95) + * redefine the standard PMBUS register. The MFR_SVI3_IOUT_PRT(0x65) + * is used to identify the iout scale and the MFR_VOUT_LOOP_CTRL(0xBD) + * is used to identify the vout scale. The READ_PIN_EST(0x94) is used + * to read input power per rail. The MP2891 does not have standard + * READ_IIN register(0x89), the iin telemetry can be obtained through + * the vendor redefined register READ_IIN_EST(0x95). + */ +#define MFR_VOUT_LOOP_CTRL 0xBD +#define READ_PIN_EST 0x94 +#define READ_IIN_EST 0x95 +#define MFR_SVI3_IOUT_PRT 0x65 + +#define MP2891_TEMP_LIMIT_OFFSET 40 +#define MP2891_PIN_LIMIT_UINT 2 +#define MP2891_IOUT_LIMIT_UINT 8 +#define MP2891_IOUT_SCALE_DIV 32 +#define MP2891_VOUT_SCALE_DIV 100 +#define MP2891_OVUV_DELTA_SCALE 50 +#define MP2891_OV_LIMIT_SCALE 20 +#define MP2891_UV_LIMIT_SCALE 5 + +#define MP2891_PAGE_NUM 2 + +#define MP2891_RAIL1_FUNC (PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | \ + PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP | \ + PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | \ + PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_INPUT | \ + PMBUS_HAVE_STATUS_TEMP) + +#define MP2891_RAIL2_FUNC (PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | \ + PMBUS_HAVE_TEMP | PMBUS_HAVE_POUT | \ + PMBUS_HAVE_PIN | PMBUS_HAVE_IIN | \ + PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_INPUT | \ + PMBUS_HAVE_STATUS_TEMP) + +struct mp2891_data { + struct pmbus_driver_info info; + int vout_scale[MP2891_PAGE_NUM]; + int iout_scale[MP2891_PAGE_NUM]; +}; + +#define to_mp2891_data(x) container_of(x, struct mp2891_data, info) + +/* Converts a LINEAR11 value to DIRECT format */ +static u16 mp2891_reg2data_linear11(u16 word) +{ + s16 exponent; + s32 mantissa; + s64 val; + + exponent = ((s16)word) >> 11; + mantissa = ((s16)((word & 0x7ff) << 5)) >> 5; + val = mantissa; + + if (exponent >= 0) + val <<= exponent; + else + val >>= -exponent; + + return val; +} + +static int +mp2891_identify_vout_scale(struct i2c_client *client, struct pmbus_driver_info *info, + int page) +{ + struct mp2891_data *data = to_mp2891_data(info); + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(client, MFR_VOUT_LOOP_CTRL); + if (ret < 0) + return ret; + + /* + * The output voltage is equal to the READ_VOUT(0x8B) register value multiplied + * by vout_scale. + * Obtain vout scale from the register MFR_VOUT_LOOP_CTRL, bits 15-14,bit 13. + * If MFR_VOUT_LOOP_CTRL[13] = 1, the vout scale is below: + * 2.5mV/LSB + * If MFR_VOUT_LOOP_CTRL[13] = 0, the vout scale is decided by + * MFR_VOUT_LOOP_CTRL[15:14]: + * 00b - 6.25mV/LSB, 01b - 5mV/LSB, 10b - 2mV/LSB, 11b - 1mV + */ + if (ret & GENMASK(13, 13)) { + data->vout_scale[page] = 250; + } else { + ret = FIELD_GET(GENMASK(15, 14), ret); + if (ret == 0) + data->vout_scale[page] = 625; + else if (ret == 1) + data->vout_scale[page] = 500; + else if (ret == 2) + data->vout_scale[page] = 200; + else + data->vout_scale[page] = 100; + } + + return 0; +} + +static int +mp2891_identify_iout_scale(struct i2c_client *client, struct pmbus_driver_info *info, + int page) +{ + struct mp2891_data *data = to_mp2891_data(info); + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(client, MFR_SVI3_IOUT_PRT); + if (ret < 0) + return ret; + + /* + * The output current is equal to the READ_IOUT(0x8C) register value + * multiplied by iout_scale. + * Obtain iout_scale from the register MFR_SVI3_IOUT_PRT[2:0]. + * The value is selected as below: + * 000b - 1A/LSB, 001b - (1/32)A/LSB, 010b - (1/16)A/LSB, + * 011b - (1/8)A/LSB, 100b - (1/4)A/LSB, 101b - (1/2)A/LSB + * 110b - 1A/LSB, 111b - 2A/LSB + */ + switch (ret & GENMASK(2, 0)) { + case 0: + case 6: + data->iout_scale[page] = 32; + break; + case 1: + data->iout_scale[page] = 1; + break; + case 2: + data->iout_scale[page] = 2; + break; + case 3: + data->iout_scale[page] = 4; + break; + case 4: + data->iout_scale[page] = 8; + break; + case 5: + data->iout_scale[page] = 16; + break; + default: + data->iout_scale[page] = 64; + break; + } + + return 0; +} + +static int mp2891_identify(struct i2c_client *client, struct pmbus_driver_info *info) +{ + int ret; + + /* Identify vout scale for rail 1. */ + ret = mp2891_identify_vout_scale(client, info, 0); + if (ret < 0) + return ret; + + /* Identify vout scale for rail 2. */ + ret = mp2891_identify_vout_scale(client, info, 1); + if (ret < 0) + return ret; + + /* Identify iout scale for rail 1. */ + ret = mp2891_identify_iout_scale(client, info, 0); + if (ret < 0) + return ret; + + /* Identify iout scale for rail 2. */ + return mp2891_identify_iout_scale(client, info, 1); +} + +static int mp2891_read_byte_data(struct i2c_client *client, int page, int reg) +{ + int ret; + + switch (reg) { + case PMBUS_VOUT_MODE: + /* + * The MP2891 does not follow standard PMBus protocol completely, the + * PMBUS_VOUT_MODE(0x20) in MP2891 is reserved and 0x00 is always + * returned when the register is read. But the calculation of vout in + * this driver is based on direct format. As a result, the format of + * vout is enforced to direct. + */ + ret = PB_VOUT_MODE_DIRECT; + break; + default: + ret = -ENODATA; + break; + } + + return ret; +} + +static int mp2891_read_word_data(struct i2c_client *client, int page, + int phase, int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct mp2891_data *data = to_mp2891_data(info); + int ret; + + switch (reg) { + case PMBUS_READ_VIN: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = ret & GENMASK(9, 0); + break; + case PMBUS_READ_IIN: + /* + * The MP2891 does not have standard PMBUS_READ_IIN register(0x89), + * the iin telemetry can be obtained through the vender redefined + * register READ_IIN_EST(0x95). The MP2891 PMBUS_READ_IIN register + * is linear11 format, But the pout scale is set to 1A/Lsb(using + * r/m/b scale). As a result, the iin read from MP2891 should be + * calculated to A, then return the result to pmbus core. + */ + ret = pmbus_read_word_data(client, page, phase, READ_IIN_EST); + if (ret < 0) + return ret; + + ret = mp2891_reg2data_linear11(ret); + break; + case PMBUS_READ_PIN: + /* + * The MP2891 has standard PMBUS_READ_PIN register(0x97), but this + * is not used to read the input power per rail. The input power + * per rail is read through the vender redefined register + * READ_PIN_EST(0x94). The MP2891 PMBUS_READ_PIN register is linear11 + * format, But the pout scale is set to 1W/Lsb(using r/m/b scale). + * As a result, the pin read from MP2891 should be calculated to W, + * then return the result to pmbus core. + */ + ret = pmbus_read_word_data(client, page, phase, READ_PIN_EST); + if (ret < 0) + return ret; + + ret = mp2891_reg2data_linear11(ret); + break; + case PMBUS_READ_POUT: + /* + * The MP2891 PMBUS_READ_POUT register is linear11 format, and the + * exponent is not a constant value. But the pout scale is set to + * 1W/Lsb(using r/m/b scale). As a result, the pout read from MP2891 + * should be calculated to W, then return the result to pmbus core. + */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = mp2891_reg2data_linear11(ret); + break; + case PMBUS_READ_VOUT: + case PMBUS_VOUT_UV_WARN_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST(ret * data->vout_scale[page], MP2891_VOUT_SCALE_DIV); + break; + case PMBUS_READ_IOUT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(10, 0)) * data->iout_scale[page], + MP2891_IOUT_SCALE_DIV); + break; + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + /* + * The scale of MP2891 PMBUS_OT_FAULT_LIMIT and PMBUS_OT_WARN_LIMIT + * is 1°C/LSB and they have 40°C offset. + */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = (ret & GENMASK(7, 0)) - MP2891_TEMP_LIMIT_OFFSET; + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + /* + * The MP2891 PMBUS_VIN_OV_FAULT_LIMIT scale is 125mV/Lsb. + * but the vin scale is set to 31.25mV/Lsb(using r/m/b scale). + * As a result, the limit value should be multiplied by 4. + */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = (ret & GENMASK(7, 0)) * 4; + break; + case PMBUS_VOUT_UV_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(11, 8), ret)) + ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_UV_LIMIT_SCALE - + (FIELD_GET(GENMASK(11, 8), ret) + 1) * MP2891_OVUV_DELTA_SCALE; + else + ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_UV_LIMIT_SCALE; + + ret = ret < 0 ? 0 : ret; + break; + case PMBUS_VOUT_OV_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(11, 8), ret)) + ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_OV_LIMIT_SCALE + + (FIELD_GET(GENMASK(11, 8), ret) + 1) * MP2891_OVUV_DELTA_SCALE; + else + ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_OV_LIMIT_SCALE; + break; + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_IOUT_OC_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(7, 0)) * data->iout_scale[page] * + MP2891_IOUT_LIMIT_UINT, MP2891_IOUT_SCALE_DIV); + break; + case PMBUS_IIN_OC_WARN_LIMIT: + /* + * The scale of PMBUS_IIN_OC_WARN_LIMIT is 0.5A/Lsb, but the iin scale + * is set to 1A/Lsb(using r/m/b scale), so the word data should be + * divided by 2. + */ + ret = pmbus_read_word_data(client, 0, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(9, 0)), 2); + break; + case PMBUS_PIN_OP_WARN_LIMIT: + /* + * The scale of PMBUS_PIN_OP_WARN_LIMIT is 2W/Lsb, but the pin scale + * is set to 1W/Lsb(using r/m/b scale), so the word data should be + * multiplied by 2. + */ + ret = pmbus_read_word_data(client, 0, phase, reg); + if (ret < 0) + return ret; + + ret = (ret & GENMASK(9, 0)) * MP2891_PIN_LIMIT_UINT; + break; + case PMBUS_READ_TEMPERATURE_1: + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + ret = -ENODATA; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int mp2891_write_word_data(struct i2c_client *client, int page, int reg, + u16 word) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct mp2891_data *data = to_mp2891_data(info); + int ret; + + switch (reg) { + case PMBUS_VOUT_UV_WARN_LIMIT: + ret = pmbus_write_word_data(client, page, reg, + DIV_ROUND_CLOSEST(word * MP2891_VOUT_SCALE_DIV, + data->vout_scale[page])); + break; + case PMBUS_VOUT_UV_FAULT_LIMIT: + /* + * The PMBUS_VOUT_UV_FAULT_LIMIT[7:0] is the limit value, and bit8-bit15 + * should not be changed. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(11, 8), ret)) + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word + + (FIELD_GET(GENMASK(11, 8), ret) + 1) * + MP2891_OVUV_DELTA_SCALE, + MP2891_UV_LIMIT_SCALE))); + else + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word, + MP2891_UV_LIMIT_SCALE))); + break; + case PMBUS_VOUT_OV_FAULT_LIMIT: + /* + * The PMBUS_VOUT_OV_FAULT_LIMIT[7:0] is the limit value, and bit8-bit15 + * should not be changed. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(11, 8), ret)) + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word - + (FIELD_GET(GENMASK(11, 8), ret) + 1) * + MP2891_OVUV_DELTA_SCALE, + MP2891_OV_LIMIT_SCALE))); + else + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word, + MP2891_OV_LIMIT_SCALE))); + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + /* + * The PMBUS_VIN_OV_FAULT_LIMIT[7:0] is the limit value, and bit8-bit15 + * should not be changed. The scale of PMBUS_VIN_OV_FAULT_LIMIT is 125mV/Lsb, + * but the vin scale is set to 31.25mV/Lsb(using r/m/b scale), so the word data + * should be divided by 4. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word, 4))); + break; + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + /* + * The scale of MP2891 PMBUS_OT_FAULT_LIMIT and PMBUS_OT_WARN_LIMIT + * have 40°C offset. The bit0-bit7 is the limit value, and bit8-bit15 + * should not be changed. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), word + MP2891_TEMP_LIMIT_OFFSET)); + break; + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_IOUT_OC_FAULT_LIMIT: + ret = pmbus_write_word_data(client, page, reg, + DIV_ROUND_CLOSEST(word * MP2891_IOUT_SCALE_DIV, + MP2891_IOUT_LIMIT_UINT * + data->iout_scale[page])); + break; + case PMBUS_IIN_OC_WARN_LIMIT: + /* + * The scale of PMBUS_IIN_OC_WARN_LIMIT is 0.5A/Lsb, but the iin scale + * is set to 1A/Lsb(using r/m/b scale), so the word data should be + * multiplied by 2. + */ + ret = pmbus_write_word_data(client, page, reg, word * 2); + break; + case PMBUS_PIN_OP_WARN_LIMIT: + /* + * The scale of PMBUS_PIN_OP_WARN_LIMIT is 2W/Lsb, but the pin scale + * is set to 1W/Lsb(using r/m/b scale), so the word data should be + * divided by 2. + */ + ret = pmbus_write_word_data(client, page, reg, + DIV_ROUND_CLOSEST(word, MP2891_PIN_LIMIT_UINT)); + break; + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + ret = -ENODATA; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static const struct pmbus_driver_info mp2891_info = { + .pages = MP2891_PAGE_NUM, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_CURRENT_IN] = direct, + .format[PSC_CURRENT_OUT] = direct, + .format[PSC_TEMPERATURE] = direct, + .format[PSC_POWER] = direct, + .format[PSC_VOLTAGE_OUT] = direct, + + /* set vin scale 31.25mV/Lsb */ + .m[PSC_VOLTAGE_IN] = 32, + .R[PSC_VOLTAGE_IN] = 0, + .b[PSC_VOLTAGE_IN] = 0, + + /* set temp scale 1000m°C/Lsb */ + .m[PSC_TEMPERATURE] = 1, + .R[PSC_TEMPERATURE] = 0, + .b[PSC_TEMPERATURE] = 0, + + .m[PSC_CURRENT_IN] = 1, + .R[PSC_CURRENT_IN] = 0, + .b[PSC_CURRENT_IN] = 0, + + .m[PSC_CURRENT_OUT] = 1, + .R[PSC_CURRENT_OUT] = 0, + .b[PSC_CURRENT_OUT] = 0, + + .m[PSC_POWER] = 1, + .R[PSC_POWER] = 0, + .b[PSC_POWER] = 0, + + .m[PSC_VOLTAGE_OUT] = 1, + .R[PSC_VOLTAGE_OUT] = 3, + .b[PSC_VOLTAGE_OUT] = 0, + + .func[0] = MP2891_RAIL1_FUNC, + .func[1] = MP2891_RAIL2_FUNC, + .read_word_data = mp2891_read_word_data, + .write_word_data = mp2891_write_word_data, + .read_byte_data = mp2891_read_byte_data, + .identify = mp2891_identify, +}; + +static int mp2891_probe(struct i2c_client *client) +{ + struct mp2891_data *data; + + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + memcpy(&data->info, &mp2891_info, sizeof(mp2891_info)); + + return pmbus_do_probe(client, &data->info); +} + +static const struct i2c_device_id mp2891_id[] = { + {"mp2891", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, mp2891_id); + +static const struct of_device_id __maybe_unused mp2891_of_match[] = { + {.compatible = "mps,mp2891"}, + {} +}; +MODULE_DEVICE_TABLE(of, mp2891_of_match); + +static struct i2c_driver mp2891_driver = { + .driver = { + .name = "mp2891", + .of_match_table = mp2891_of_match, + }, + .probe = mp2891_probe, + .id_table = mp2891_id, +}; + +module_i2c_driver(mp2891_driver); + +MODULE_AUTHOR("Noah Wang <noahwang.wang@outlook.com>"); +MODULE_DESCRIPTION("PMBus driver for MPS MP2891"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(PMBUS); diff --git a/drivers/hwmon/pmbus/mp2993.c b/drivers/hwmon/pmbus/mp2993.c new file mode 100644 index 000000000000..944593e13231 --- /dev/null +++ b/drivers/hwmon/pmbus/mp2993.c @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for MPS Multi-phase Digital VR Controllers(MP2993) + */ + +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include "pmbus.h" + +#define MP2993_VOUT_OVUV_UINT 125 +#define MP2993_VOUT_OVUV_DIV 64 +#define MP2993_VIN_LIMIT_UINT 1 +#define MP2993_VIN_LIMIT_DIV 8 +#define MP2993_READ_VIN_UINT 1 +#define MP2993_READ_VIN_DIV 32 + +#define MP2993_PAGE_NUM 2 + +#define MP2993_RAIL1_FUNC (PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | \ + PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | \ + PMBUS_HAVE_TEMP | PMBUS_HAVE_PIN | \ + PMBUS_HAVE_IIN | \ + PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_TEMP | \ + PMBUS_HAVE_STATUS_INPUT) + +#define MP2993_RAIL2_FUNC (PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | \ + PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP | \ + PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_TEMP | \ + PMBUS_HAVE_STATUS_INPUT) + +/* Converts a linear11 data exponent to a specified value */ +static u16 mp2993_linear11_exponent_transfer(u16 word, u16 expect_exponent) +{ + s16 exponent, mantissa, target_exponent; + + exponent = ((s16)word) >> 11; + mantissa = ((s16)((word & 0x7ff) << 5)) >> 5; + target_exponent = (s16)((expect_exponent & 0x1f) << 11) >> 11; + + if (exponent > target_exponent) + mantissa = mantissa << (exponent - target_exponent); + else + mantissa = mantissa >> (target_exponent - exponent); + + return (mantissa & 0x7ff) | ((expect_exponent << 11) & 0xf800); +} + +static int +mp2993_set_vout_format(struct i2c_client *client, int page, int format) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + if (ret < 0) + return ret; + + return i2c_smbus_write_byte_data(client, PMBUS_VOUT_MODE, format); +} + +static int mp2993_identify(struct i2c_client *client, struct pmbus_driver_info *info) +{ + int ret; + + /* Set vout to direct format for rail1. */ + ret = mp2993_set_vout_format(client, 0, PB_VOUT_MODE_DIRECT); + if (ret < 0) + return ret; + + /* Set vout to direct format for rail2. */ + return mp2993_set_vout_format(client, 1, PB_VOUT_MODE_DIRECT); +} + +static int mp2993_read_word_data(struct i2c_client *client, int page, int phase, + int reg) +{ + int ret; + + switch (reg) { + case PMBUS_VOUT_OV_FAULT_LIMIT: + case PMBUS_VOUT_UV_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST(ret * MP2993_VOUT_OVUV_UINT, MP2993_VOUT_OVUV_DIV); + break; + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + /* + * The MP2993 ot fault limit value and ot warn limit value + * per rail are always the same, so only PMBUS_OT_FAULT_LIMIT + * and PMBUS_OT_WARN_LIMIT register in page 0 are defined to + * indicates the limit value. + */ + ret = pmbus_read_word_data(client, 0, phase, reg); + break; + case PMBUS_READ_VIN: + /* The MP2993 vin scale is (1/32V)/Lsb */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(9, 0)) * MP2993_READ_VIN_UINT, + MP2993_READ_VIN_DIV); + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + /* The MP2993 vin limit scale is (1/8V)/Lsb */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(7, 0)) * MP2993_VIN_LIMIT_UINT, + MP2993_VIN_LIMIT_DIV); + break; + case PMBUS_READ_IOUT: + case PMBUS_READ_IIN: + case PMBUS_IIN_OC_WARN_LIMIT: + case PMBUS_IOUT_OC_FAULT_LIMIT: + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_READ_VOUT: + case PMBUS_READ_PIN: + case PMBUS_READ_POUT: + case PMBUS_READ_TEMPERATURE_1: + ret = -ENODATA; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int mp2993_write_word_data(struct i2c_client *client, int page, int reg, + u16 word) +{ + int ret; + + switch (reg) { + case PMBUS_VOUT_OV_FAULT_LIMIT: + case PMBUS_VOUT_UV_FAULT_LIMIT: + ret = DIV_ROUND_CLOSEST(word * MP2993_VOUT_OVUV_DIV, MP2993_VOUT_OVUV_UINT); + ret = pmbus_write_word_data(client, 0, reg, ret); + break; + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + /* + * The MP2993 ot fault limit value and ot warn limit value + * per rail are always the same, so only PMBUS_OT_FAULT_LIMIT + * and PMBUS_OT_WARN_LIMIT register in page 0 are defined to + * config the ot limit value. + */ + ret = pmbus_write_word_data(client, 0, reg, word); + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + /* The MP2993 vin limit scale is (1/8V)/Lsb */ + ret = pmbus_write_word_data(client, 0, reg, + DIV_ROUND_CLOSEST(word * MP2993_VIN_LIMIT_DIV, + MP2993_VIN_LIMIT_UINT)); + break; + case PMBUS_IIN_OC_WARN_LIMIT: + /* + * The PMBUS_IIN_OC_WARN_LIMIT of MP2993 is linear11 format, + * and the exponent is a constant value(5'b00000)， so the + * exponent of word parameter should be converted to 5'b00000. + */ + ret = pmbus_write_word_data(client, page, reg, + mp2993_linear11_exponent_transfer(word, 0x00)); + break; + // + case PMBUS_IOUT_OC_FAULT_LIMIT: + case PMBUS_IOUT_OC_WARN_LIMIT: + /* + * The PMBUS_IOUT_OC_FAULT_LIMIT and PMBUS_IOUT_OC_WARN_LIMIT + * of MP2993 can be regarded as linear11 format, and the + * exponent is a 5'b00001 or 5'b00000. To ensure a larger + * range of limit value, so the exponent of word parameter + * should be converted to 5'b00001. + */ + ret = pmbus_write_word_data(client, page, reg, + mp2993_linear11_exponent_transfer(word, 0x01)); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static struct pmbus_driver_info mp2993_info = { + .pages = MP2993_PAGE_NUM, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_CURRENT_IN] = linear, + .format[PSC_CURRENT_OUT] = linear, + .format[PSC_TEMPERATURE] = direct, + .format[PSC_POWER] = linear, + .format[PSC_VOLTAGE_OUT] = direct, + + .m[PSC_VOLTAGE_OUT] = 1, + .R[PSC_VOLTAGE_OUT] = 3, + .b[PSC_VOLTAGE_OUT] = 0, + + .m[PSC_VOLTAGE_IN] = 1, + .R[PSC_VOLTAGE_IN] = 0, + .b[PSC_VOLTAGE_IN] = 0, + + .m[PSC_TEMPERATURE] = 1, + .R[PSC_TEMPERATURE] = 0, + .b[PSC_TEMPERATURE] = 0, + + .func[0] = MP2993_RAIL1_FUNC, + .func[1] = MP2993_RAIL2_FUNC, + .read_word_data = mp2993_read_word_data, + .write_word_data = mp2993_write_word_data, + .identify = mp2993_identify, +}; + +static int mp2993_probe(struct i2c_client *client) +{ + return pmbus_do_probe(client, &mp2993_info); +} + +static const struct i2c_device_id mp2993_id[] = { + {"mp2993", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, mp2993_id); + +static const struct of_device_id __maybe_unused mp2993_of_match[] = { + {.compatible = "mps,mp2993"}, + {} +}; +MODULE_DEVICE_TABLE(of, mp2993_of_match); + +static struct i2c_driver mp2993_driver = { + .driver = { + .name = "mp2993", + .of_match_table = mp2993_of_match, + }, + .probe = mp2993_probe, + .id_table = mp2993_id, +}; + +module_i2c_driver(mp2993_driver); + +MODULE_AUTHOR("Noah Wang <noahwang.wang@outlook.com>"); +MODULE_DESCRIPTION("PMBus driver for MPS MP2993"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(PMBUS); diff --git a/drivers/hwmon/pmbus/mp5920.c b/drivers/hwmon/pmbus/mp5920.c new file mode 100644 index 000000000000..f6d7527ade7d --- /dev/null +++ b/drivers/hwmon/pmbus/mp5920.c @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for MP5920 and compatible chips. + */ + +#include <linux/i2c.h> +#include <linux/minmax.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include "pmbus.h" + +static struct pmbus_driver_info mp5920_info = { + .pages = 1, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_VOLTAGE_OUT] = direct, + .format[PSC_CURRENT_OUT] = direct, + .format[PSC_POWER] = direct, + .format[PSC_TEMPERATURE] = direct, + .m[PSC_VOLTAGE_IN] = 2266, + .b[PSC_VOLTAGE_IN] = 0, + .R[PSC_VOLTAGE_IN] = -1, + .m[PSC_VOLTAGE_OUT] = 2266, + .b[PSC_VOLTAGE_OUT] = 0, + .R[PSC_VOLTAGE_OUT] = -1, + .m[PSC_CURRENT_OUT] = 546, + .b[PSC_CURRENT_OUT] = 0, + .R[PSC_CURRENT_OUT] = -2, + .m[PSC_POWER] = 5840, + .b[PSC_POWER] = 0, + .R[PSC_POWER] = -3, + .m[PSC_TEMPERATURE] = 1067, + .b[PSC_TEMPERATURE] = 20500, + .R[PSC_TEMPERATURE] = -2, + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | + PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | + PMBUS_HAVE_TEMP, +}; + +static int mp5920_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + int ret; + u8 buf[I2C_SMBUS_BLOCK_MAX]; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_WORD_DATA)) + return -ENODEV; + + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf); + if (ret < 0) + return dev_err_probe(dev, ret, "Failed to read PMBUS_MFR_MODEL\n"); + + if (ret != 6 || strncmp(buf, "MP5920", 6)) { + return dev_err_probe(dev, -ENODEV, "Model '%.*s' not supported\n", + min_t(int, ret, sizeof(buf)), buf); + } + + return pmbus_do_probe(client, &mp5920_info); +} + +static const struct of_device_id mp5920_of_match[] = { + { .compatible = "mps,mp5920" }, + { } +}; + +MODULE_DEVICE_TABLE(of, mp5920_of_match); + +static const struct i2c_device_id mp5920_id[] = { + { "mp5920" }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, mp5920_id); + +static struct i2c_driver mp5920_driver = { + .driver = { + .name = "mp5920", + .of_match_table = mp5920_of_match, + }, + .probe = mp5920_probe, + .id_table = mp5920_id, +}; + +module_i2c_driver(mp5920_driver); + +MODULE_AUTHOR("Tony Ao <tony_ao@wiwynn.com>"); +MODULE_AUTHOR("Alex Vdovydchenko <xzeol@yahoo.com>"); +MODULE_DESCRIPTION("PMBus driver for MP5920 HSC"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(PMBUS); diff --git a/drivers/hwmon/pmbus/mp9941.c b/drivers/hwmon/pmbus/mp9941.c new file mode 100644 index 000000000000..543955cfce67 --- /dev/null +++ b/drivers/hwmon/pmbus/mp9941.c @@ -0,0 +1,319 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for MPS Multi-phase Digital VR Controllers(MP9941) + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include "pmbus.h" + +/* + * Vender specific registers. The MFR_ICC_MAX(0x02) is used to + * config the iin scale. The MFR_RESO_SET(0xC7) is used to + * config the vout format. The MFR_VR_MULTI_CONFIG_R1(0x0D) is + * used to identify the vout vid step. + */ +#define MFR_ICC_MAX 0x02 +#define MFR_RESO_SET 0xC7 +#define MFR_VR_MULTI_CONFIG_R1 0x0D + +#define MP9941_VIN_LIMIT_UINT 1 +#define MP9941_VIN_LIMIT_DIV 8 +#define MP9941_READ_VIN_UINT 1 +#define MP9941_READ_VIN_DIV 32 + +#define MP9941_PAGE_NUM 1 + +#define MP9941_RAIL1_FUNC (PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | \ + PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | \ + PMBUS_HAVE_TEMP | PMBUS_HAVE_PIN | \ + PMBUS_HAVE_IIN | \ + PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_TEMP | \ + PMBUS_HAVE_STATUS_INPUT) + +struct mp9941_data { + struct pmbus_driver_info info; + int vid_resolution; +}; + +#define to_mp9941_data(x) container_of(x, struct mp9941_data, info) + +static int mp9941_set_vout_format(struct i2c_client *client) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(client, MFR_RESO_SET); + if (ret < 0) + return ret; + + /* + * page = 0, MFR_RESO_SET[7:6] defines the vout format + * 2'b11 set the vout format as direct + */ + ret = (ret & ~GENMASK(7, 6)) | FIELD_PREP(GENMASK(7, 6), 3); + + return i2c_smbus_write_word_data(client, MFR_RESO_SET, ret); +} + +static int +mp9941_identify_vid_resolution(struct i2c_client *client, struct pmbus_driver_info *info) +{ + struct mp9941_data *data = to_mp9941_data(info); + int ret; + + /* + * page = 2, MFR_VR_MULTI_CONFIG_R1[4:4] defines rail1 vid step value + * 1'b0 represents the vid step value is 10mV + * 1'b1 represents the vid step value is 5mV + */ + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(client, MFR_VR_MULTI_CONFIG_R1); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(4, 4), ret)) + data->vid_resolution = 5; + else + data->vid_resolution = 10; + + return 0; +} + +static int mp9941_identify_iin_scale(struct i2c_client *client) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(client, MFR_RESO_SET); + if (ret < 0) + return ret; + + ret = (ret & ~GENMASK(3, 2)) | FIELD_PREP(GENMASK(3, 2), 0); + + ret = i2c_smbus_write_word_data(client, MFR_RESO_SET, ret); + if (ret < 0) + return ret; + + /* + * page = 2, MFR_ICC_MAX[15:13] defines the iin scale + * 3'b000 set the iout scale as 0.5A/Lsb + */ + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(client, MFR_ICC_MAX); + if (ret < 0) + return ret; + + ret = (ret & ~GENMASK(15, 13)) | FIELD_PREP(GENMASK(15, 13), 0); + + return i2c_smbus_write_word_data(client, MFR_ICC_MAX, ret); +} + +static int mp9941_identify(struct i2c_client *client, struct pmbus_driver_info *info) +{ + int ret; + + ret = mp9941_identify_iin_scale(client); + if (ret < 0) + return ret; + + ret = mp9941_identify_vid_resolution(client, info); + if (ret < 0) + return ret; + + return mp9941_set_vout_format(client); +} + +static int mp9941_read_word_data(struct i2c_client *client, int page, int phase, + int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct mp9941_data *data = to_mp9941_data(info); + int ret; + + switch (reg) { + case PMBUS_READ_VIN: + /* The MP9941 vin scale is (1/32V)/Lsb */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(9, 0)) * MP9941_READ_VIN_UINT, + MP9941_READ_VIN_DIV); + break; + case PMBUS_READ_IIN: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = ret & GENMASK(10, 0); + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + /* The MP9941 vin ov limit scale is (1/8V)/Lsb */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(7, 0)) * MP9941_VIN_LIMIT_UINT, + MP9941_VIN_LIMIT_DIV); + break; + case PMBUS_IIN_OC_WARN_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = ret & GENMASK(7, 0); + break; + case PMBUS_VOUT_UV_FAULT_LIMIT: + case PMBUS_MFR_VOUT_MIN: + case PMBUS_MFR_VOUT_MAX: + /* + * The vout scale is set to 1mV/Lsb(using r/m/b scale). + * But the vout uv limit and vout max/min scale is 1VID/Lsb, + * so the vout uv limit and vout max/min value should be + * multiplied by vid resolution. + */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = ret * data->vid_resolution; + break; + case PMBUS_READ_IOUT: + case PMBUS_READ_POUT: + case PMBUS_READ_TEMPERATURE_1: + case PMBUS_READ_VOUT: + case PMBUS_READ_PIN: + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + ret = -ENODATA; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int mp9941_write_word_data(struct i2c_client *client, int page, int reg, + u16 word) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct mp9941_data *data = to_mp9941_data(info); + int ret; + + switch (reg) { + case PMBUS_VIN_OV_FAULT_LIMIT: + /* The MP9941 vin ov limit scale is (1/8V)/Lsb */ + ret = pmbus_write_word_data(client, page, reg, + DIV_ROUND_CLOSEST(word * MP9941_VIN_LIMIT_DIV, + MP9941_VIN_LIMIT_UINT)); + break; + case PMBUS_VOUT_UV_FAULT_LIMIT: + case PMBUS_MFR_VOUT_MIN: + case PMBUS_MFR_VOUT_MAX: + ret = pmbus_write_word_data(client, page, reg, + DIV_ROUND_CLOSEST(word, data->vid_resolution)); + break; + case PMBUS_IIN_OC_WARN_LIMIT: + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + ret = -ENODATA; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static const struct pmbus_driver_info mp9941_info = { + .pages = MP9941_PAGE_NUM, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_CURRENT_IN] = direct, + .format[PSC_CURRENT_OUT] = linear, + .format[PSC_POWER] = linear, + .format[PSC_TEMPERATURE] = direct, + .format[PSC_VOLTAGE_OUT] = direct, + + .m[PSC_TEMPERATURE] = 1, + .R[PSC_TEMPERATURE] = 0, + .b[PSC_TEMPERATURE] = 0, + + .m[PSC_VOLTAGE_IN] = 1, + .R[PSC_VOLTAGE_IN] = 0, + .b[PSC_VOLTAGE_IN] = 0, + + .m[PSC_CURRENT_IN] = 2, + .R[PSC_CURRENT_IN] = 0, + .b[PSC_CURRENT_IN] = 0, + + .m[PSC_VOLTAGE_OUT] = 1, + .R[PSC_VOLTAGE_OUT] = 3, + .b[PSC_VOLTAGE_OUT] = 0, + + .func[0] = MP9941_RAIL1_FUNC, + .read_word_data = mp9941_read_word_data, + .write_word_data = mp9941_write_word_data, + .identify = mp9941_identify, +}; + +static int mp9941_probe(struct i2c_client *client) +{ + struct mp9941_data *data; + + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + memcpy(&data->info, &mp9941_info, sizeof(mp9941_info)); + + return pmbus_do_probe(client, &data->info); +} + +static const struct i2c_device_id mp9941_id[] = { + {"mp9941", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, mp9941_id); + +static const struct of_device_id __maybe_unused mp9941_of_match[] = { + {.compatible = "mps,mp9941"}, + {} +}; +MODULE_DEVICE_TABLE(of, mp9941_of_match); + +static struct i2c_driver mp9941_driver = { + .driver = { + .name = "mp9941", + .of_match_table = mp9941_of_match, + }, + .probe = mp9941_probe, + .id_table = mp9941_id, +}; + +module_i2c_driver(mp9941_driver); + +MODULE_AUTHOR("Noah Wang <noahwang.wang@outlook.com>"); +MODULE_DESCRIPTION("PMBus driver for MPS MP9941"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(PMBUS); diff --git a/drivers/hwmon/powr1220.c b/drivers/hwmon/powr1220.c index 2388d0565e7e..5f9ca6543530 100644 --- a/drivers/hwmon/powr1220.c +++ b/drivers/hwmon/powr1220.c @@ -279,12 +279,11 @@ static const struct hwmon_chip_info powr1220_chip_info = { .info = powr1220_info, }; -static const struct i2c_device_id powr1220_ids[]; - static int powr1220_probe(struct i2c_client *client) { struct powr1220_data *data; struct device *hwmon_dev; + enum powr1xxx_chips chip; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; @@ -293,7 +292,8 @@ static int powr1220_probe(struct i2c_client *client) if (!data) return -ENOMEM; - switch (i2c_match_id(powr1220_ids, client)->driver_data) { + chip = (uintptr_t)i2c_get_match_data(client); + switch (chip) { case powr1014: data->max_channels = 10; break; diff --git a/drivers/hwmon/sht3x.c b/drivers/hwmon/sht3x.c index c0d02fbcdb76..650b0bcc2359 100644 --- a/drivers/hwmon/sht3x.c +++ b/drivers/hwmon/sht3x.c @@ -882,15 +882,6 @@ static const struct hwmon_chip_info sht3x_chip_info = { .info = sht3x_channel_info, }; -/* device ID table */ -static const struct i2c_device_id sht3x_ids[] = { - {"sht3x", sht3x}, - {"sts3x", sts3x}, - {} -}; - -MODULE_DEVICE_TABLE(i2c, sht3x_ids); - static int sht3x_probe(struct i2c_client *client) { int ret; @@ -920,7 +911,7 @@ static int sht3x_probe(struct i2c_client *client) data->mode = 0; data->last_update = jiffies - msecs_to_jiffies(3000); data->client = client; - data->chip_id = i2c_match_id(sht3x_ids, client)->driver_data; + data->chip_id = (uintptr_t)i2c_get_match_data(client); crc8_populate_msb(sht3x_crc8_table, SHT3X_CRC8_POLYNOMIAL); sht3x_select_command(data); @@ -963,6 +954,15 @@ static int sht3x_probe(struct i2c_client *client) return PTR_ERR_OR_ZERO(hwmon_dev); } +/* device ID table */ +static const struct i2c_device_id sht3x_ids[] = { + {"sht3x", sht3x}, + {"sts3x", sts3x}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, sht3x_ids); + static struct i2c_driver sht3x_i2c_driver = { .driver.name = "sht3x", .probe = sht3x_probe, diff --git a/drivers/hwmon/shtc1.c b/drivers/hwmon/shtc1.c index 439dd3dba5fc..2ac906e8e173 100644 --- a/drivers/hwmon/shtc1.c +++ b/drivers/hwmon/shtc1.c @@ -186,8 +186,6 @@ static void shtc1_select_command(struct shtc1_data *data) } } -static const struct i2c_device_id shtc1_id[]; - static int shtc1_probe(struct i2c_client *client) { int ret; @@ -195,7 +193,7 @@ static int shtc1_probe(struct i2c_client *client) char id_reg_buf[2]; struct shtc1_data *data; struct device *hwmon_dev; - enum shtcx_chips chip = i2c_match_id(shtc1_id, client)->driver_data; + enum shtcx_chips chip = (uintptr_t)i2c_get_match_data(client); struct i2c_adapter *adap = client->adapter; struct device *dev = &client->dev; struct device_node *np = dev->of_node; diff --git a/drivers/hwmon/spd5118.c b/drivers/hwmon/spd5118.c new file mode 100644 index 000000000000..fcbce5a01e55 --- /dev/null +++ b/drivers/hwmon/spd5118.c @@ -0,0 +1,703 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for Jedec 5118 compliant temperature sensors + * + * Derived from https://github.com/Steve-Tech/SPD5118-DKMS + * Originally from T/2 driver at https://t2sde.org/packages/linux + * Copyright (c) 2023 RenĂ© Rebe, ExactCODE GmbH; Germany. + * + * Copyright (c) 2024 Guenter Roeck + * + * Inspired by ee1004.c and jc42.c. + * + * SPD5118 compliant temperature sensors are typically used on DDR5 + * memory modules. + */ + +#include <linux/bitops.h> +#include <linux/bits.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/nvmem-provider.h> +#include <linux/pm.h> +#include <linux/regmap.h> +#include <linux/units.h> + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { + 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, I2C_CLIENT_END }; + +/* SPD5118 registers. */ +#define SPD5118_REG_TYPE 0x00 /* MR0:MR1 */ +#define SPD5118_REG_REVISION 0x02 /* MR2 */ +#define SPD5118_REG_VENDOR 0x03 /* MR3:MR4 */ +#define SPD5118_REG_CAPABILITY 0x05 /* MR5 */ +#define SPD5118_REG_I2C_LEGACY_MODE 0x0B /* MR11 */ +#define SPD5118_REG_TEMP_CLR 0x13 /* MR19 */ +#define SPD5118_REG_ERROR_CLR 0x14 /* MR20 */ +#define SPD5118_REG_TEMP_CONFIG 0x1A /* MR26 */ +#define SPD5118_REG_TEMP_MAX 0x1c /* MR28:MR29 */ +#define SPD5118_REG_TEMP_MIN 0x1e /* MR30:MR31 */ +#define SPD5118_REG_TEMP_CRIT 0x20 /* MR32:MR33 */ +#define SPD5118_REG_TEMP_LCRIT 0x22 /* MR34:MR35 */ +#define SPD5118_REG_TEMP 0x31 /* MR49:MR50 */ +#define SPD5118_REG_TEMP_STATUS 0x33 /* MR51 */ + +#define SPD5118_TEMP_STATUS_HIGH BIT(0) +#define SPD5118_TEMP_STATUS_LOW BIT(1) +#define SPD5118_TEMP_STATUS_CRIT BIT(2) +#define SPD5118_TEMP_STATUS_LCRIT BIT(3) + +#define SPD5118_CAP_TS_SUPPORT BIT(1) /* temperature sensor support */ + +#define SPD5118_TS_DISABLE BIT(0) /* temperature sensor disable */ + +#define SPD5118_LEGACY_MODE_ADDR BIT(3) +#define SPD5118_LEGACY_PAGE_MASK GENMASK(2, 0) +#define SPD5118_LEGACY_MODE_MASK (SPD5118_LEGACY_MODE_ADDR | SPD5118_LEGACY_PAGE_MASK) + +#define SPD5118_NUM_PAGES 8 +#define SPD5118_PAGE_SIZE 128 +#define SPD5118_PAGE_SHIFT 7 +#define SPD5118_PAGE_MASK GENMASK(6, 0) +#define SPD5118_EEPROM_BASE 0x80 +#define SPD5118_EEPROM_SIZE (SPD5118_PAGE_SIZE * SPD5118_NUM_PAGES) + +/* Temperature unit in millicelsius */ +#define SPD5118_TEMP_UNIT (MILLIDEGREE_PER_DEGREE / 4) +/* Representable temperature range in millicelsius */ +#define SPD5118_TEMP_RANGE_MIN -256000 +#define SPD5118_TEMP_RANGE_MAX 255750 + +struct spd5118_data { + struct regmap *regmap; + struct mutex nvmem_lock; +}; + +/* hwmon */ + +static int spd5118_temp_from_reg(u16 reg) +{ + int temp = sign_extend32(reg >> 2, 10); + + return temp * SPD5118_TEMP_UNIT; +} + +static u16 spd5118_temp_to_reg(long temp) +{ + temp = clamp_val(temp, SPD5118_TEMP_RANGE_MIN, SPD5118_TEMP_RANGE_MAX); + return (DIV_ROUND_CLOSEST(temp, SPD5118_TEMP_UNIT) & 0x7ff) << 2; +} + +static int spd5118_read_temp(struct regmap *regmap, u32 attr, long *val) +{ + int reg, err; + u8 regval[2]; + u16 temp; + + switch (attr) { + case hwmon_temp_input: + reg = SPD5118_REG_TEMP; + break; + case hwmon_temp_max: + reg = SPD5118_REG_TEMP_MAX; + break; + case hwmon_temp_min: + reg = SPD5118_REG_TEMP_MIN; + break; + case hwmon_temp_crit: + reg = SPD5118_REG_TEMP_CRIT; + break; + case hwmon_temp_lcrit: + reg = SPD5118_REG_TEMP_LCRIT; + break; + default: + return -EOPNOTSUPP; + } + + err = regmap_bulk_read(regmap, reg, regval, 2); + if (err) + return err; + + temp = (regval[1] << 8) | regval[0]; + + *val = spd5118_temp_from_reg(temp); + return 0; +} + +static int spd5118_read_alarm(struct regmap *regmap, u32 attr, long *val) +{ + unsigned int mask, regval; + int err; + + switch (attr) { + case hwmon_temp_max_alarm: + mask = SPD5118_TEMP_STATUS_HIGH; + break; + case hwmon_temp_min_alarm: + mask = SPD5118_TEMP_STATUS_LOW; + break; + case hwmon_temp_crit_alarm: + mask = SPD5118_TEMP_STATUS_CRIT; + break; + case hwmon_temp_lcrit_alarm: + mask = SPD5118_TEMP_STATUS_LCRIT; + break; + default: + return -EOPNOTSUPP; + } + + err = regmap_read(regmap, SPD5118_REG_TEMP_STATUS, ®val); + if (err < 0) + return err; + *val = !!(regval & mask); + if (*val) + return regmap_write(regmap, SPD5118_REG_TEMP_CLR, mask); + return 0; +} + +static int spd5118_read_enable(struct regmap *regmap, long *val) +{ + u32 regval; + int err; + + err = regmap_read(regmap, SPD5118_REG_TEMP_CONFIG, ®val); + if (err < 0) + return err; + *val = !(regval & SPD5118_TS_DISABLE); + return 0; +} + +static int spd5118_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct regmap *regmap = dev_get_drvdata(dev); + + if (type != hwmon_temp) + return -EOPNOTSUPP; + + switch (attr) { + case hwmon_temp_input: + case hwmon_temp_max: + case hwmon_temp_min: + case hwmon_temp_crit: + case hwmon_temp_lcrit: + return spd5118_read_temp(regmap, attr, val); + case hwmon_temp_max_alarm: + case hwmon_temp_min_alarm: + case hwmon_temp_crit_alarm: + case hwmon_temp_lcrit_alarm: + return spd5118_read_alarm(regmap, attr, val); + case hwmon_temp_enable: + return spd5118_read_enable(regmap, val); + default: + return -EOPNOTSUPP; + } +} + +static int spd5118_write_temp(struct regmap *regmap, u32 attr, long val) +{ + u8 regval[2]; + u16 temp; + int reg; + + switch (attr) { + case hwmon_temp_max: + reg = SPD5118_REG_TEMP_MAX; + break; + case hwmon_temp_min: + reg = SPD5118_REG_TEMP_MIN; + break; + case hwmon_temp_crit: + reg = SPD5118_REG_TEMP_CRIT; + break; + case hwmon_temp_lcrit: + reg = SPD5118_REG_TEMP_LCRIT; + break; + default: + return -EOPNOTSUPP; + } + + temp = spd5118_temp_to_reg(val); + regval[0] = temp & 0xff; + regval[1] = temp >> 8; + + return regmap_bulk_write(regmap, reg, regval, 2); +} + +static int spd5118_write_enable(struct regmap *regmap, long val) +{ + if (val && val != 1) + return -EINVAL; + + return regmap_update_bits(regmap, SPD5118_REG_TEMP_CONFIG, + SPD5118_TS_DISABLE, + val ? 0 : SPD5118_TS_DISABLE); +} + +static int spd5118_temp_write(struct regmap *regmap, u32 attr, long val) +{ + switch (attr) { + case hwmon_temp_max: + case hwmon_temp_min: + case hwmon_temp_crit: + case hwmon_temp_lcrit: + return spd5118_write_temp(regmap, attr, val); + case hwmon_temp_enable: + return spd5118_write_enable(regmap, val); + default: + return -EOPNOTSUPP; + } +} + +static int spd5118_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct regmap *regmap = dev_get_drvdata(dev); + + switch (type) { + case hwmon_temp: + return spd5118_temp_write(regmap, attr, val); + default: + return -EOPNOTSUPP; + } +} + +static umode_t spd5118_is_visible(const void *_data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + if (type != hwmon_temp) + return 0; + + switch (attr) { + case hwmon_temp_input: + return 0444; + case hwmon_temp_min: + case hwmon_temp_max: + case hwmon_temp_lcrit: + case hwmon_temp_crit: + case hwmon_temp_enable: + return 0644; + case hwmon_temp_min_alarm: + case hwmon_temp_max_alarm: + case hwmon_temp_crit_alarm: + case hwmon_temp_lcrit_alarm: + return 0444; + default: + return 0; + } +} + +static inline bool spd5118_parity8(u8 w) +{ + w ^= w >> 4; + return (0x6996 >> (w & 0xf)) & 1; +} + +/* + * Bank and vendor id are 8-bit fields with seven data bits and odd parity. + * Vendor IDs 0 and 0x7f are invalid. + * See Jedec standard JEP106BJ for details and a list of assigned vendor IDs. + */ +static bool spd5118_vendor_valid(u8 bank, u8 id) +{ + if (!spd5118_parity8(bank) || !spd5118_parity8(id)) + return false; + + id &= 0x7f; + return id && id != 0x7f; +} + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int spd5118_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + int regval; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + regval = i2c_smbus_read_word_swapped(client, SPD5118_REG_TYPE); + if (regval != 0x5118) + return -ENODEV; + + regval = i2c_smbus_read_word_data(client, SPD5118_REG_VENDOR); + if (regval < 0 || !spd5118_vendor_valid(regval & 0xff, regval >> 8)) + return -ENODEV; + + regval = i2c_smbus_read_byte_data(client, SPD5118_REG_CAPABILITY); + if (regval < 0) + return -ENODEV; + if (!(regval & SPD5118_CAP_TS_SUPPORT) || (regval & 0xfc)) + return -ENODEV; + + regval = i2c_smbus_read_byte_data(client, SPD5118_REG_TEMP_CLR); + if (regval) + return -ENODEV; + regval = i2c_smbus_read_byte_data(client, SPD5118_REG_ERROR_CLR); + if (regval) + return -ENODEV; + + regval = i2c_smbus_read_byte_data(client, SPD5118_REG_REVISION); + if (regval < 0 || (regval & 0xc1)) + return -ENODEV; + + regval = i2c_smbus_read_byte_data(client, SPD5118_REG_TEMP_CONFIG); + if (regval < 0) + return -ENODEV; + if (regval & ~SPD5118_TS_DISABLE) + return -ENODEV; + + strscpy(info->type, "spd5118", I2C_NAME_SIZE); + return 0; +} + +static const struct hwmon_channel_info *spd5118_info[] = { + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | + HWMON_T_LCRIT | HWMON_T_LCRIT_ALARM | + HWMON_T_MIN | HWMON_T_MIN_ALARM | + HWMON_T_MAX | HWMON_T_MAX_ALARM | + HWMON_T_CRIT | HWMON_T_CRIT_ALARM | + HWMON_T_ENABLE), + NULL +}; + +static const struct hwmon_ops spd5118_hwmon_ops = { + .is_visible = spd5118_is_visible, + .read = spd5118_read, + .write = spd5118_write, +}; + +static const struct hwmon_chip_info spd5118_chip_info = { + .ops = &spd5118_hwmon_ops, + .info = spd5118_info, +}; + +/* nvmem */ + +static ssize_t spd5118_nvmem_read_page(struct regmap *regmap, char *buf, + unsigned int offset, size_t count) +{ + int addr = (offset >> SPD5118_PAGE_SHIFT) * 0x100 + SPD5118_EEPROM_BASE; + int err; + + offset &= SPD5118_PAGE_MASK; + + /* Can't cross page boundaries */ + if (offset + count > SPD5118_PAGE_SIZE) + count = SPD5118_PAGE_SIZE - offset; + + err = regmap_bulk_read(regmap, addr + offset, buf, count); + if (err) + return err; + + return count; +} + +static int spd5118_nvmem_read(void *priv, unsigned int off, void *val, size_t count) +{ + struct spd5118_data *data = priv; + char *buf = val; + int ret; + + if (unlikely(!count)) + return count; + + if (off + count > SPD5118_EEPROM_SIZE) + return -EINVAL; + + mutex_lock(&data->nvmem_lock); + + while (count) { + ret = spd5118_nvmem_read_page(data->regmap, buf, off, count); + if (ret < 0) { + mutex_unlock(&data->nvmem_lock); + return ret; + } + buf += ret; + off += ret; + count -= ret; + } + mutex_unlock(&data->nvmem_lock); + return 0; +} + +static int spd5118_nvmem_init(struct device *dev, struct spd5118_data *data) +{ + struct nvmem_config nvmem_config = { + .type = NVMEM_TYPE_EEPROM, + .name = dev_name(dev), + .id = NVMEM_DEVID_NONE, + .dev = dev, + .base_dev = dev, + .read_only = true, + .root_only = false, + .owner = THIS_MODULE, + .compat = true, + .reg_read = spd5118_nvmem_read, + .priv = data, + .stride = 1, + .word_size = 1, + .size = SPD5118_EEPROM_SIZE, + }; + struct nvmem_device *nvmem; + + nvmem = devm_nvmem_register(dev, &nvmem_config); + return PTR_ERR_OR_ZERO(nvmem); +} + +/* regmap */ + +static bool spd5118_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case SPD5118_REG_I2C_LEGACY_MODE: + case SPD5118_REG_TEMP_CLR: + case SPD5118_REG_TEMP_CONFIG: + case SPD5118_REG_TEMP_MAX: + case SPD5118_REG_TEMP_MAX + 1: + case SPD5118_REG_TEMP_MIN: + case SPD5118_REG_TEMP_MIN + 1: + case SPD5118_REG_TEMP_CRIT: + case SPD5118_REG_TEMP_CRIT + 1: + case SPD5118_REG_TEMP_LCRIT: + case SPD5118_REG_TEMP_LCRIT + 1: + return true; + default: + return false; + } +} + +static bool spd5118_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case SPD5118_REG_TEMP_CLR: + case SPD5118_REG_ERROR_CLR: + case SPD5118_REG_TEMP: + case SPD5118_REG_TEMP + 1: + case SPD5118_REG_TEMP_STATUS: + return true; + default: + return false; + } +} + +static const struct regmap_range_cfg spd5118_regmap_range_cfg[] = { + { + .selector_reg = SPD5118_REG_I2C_LEGACY_MODE, + .selector_mask = SPD5118_LEGACY_PAGE_MASK, + .selector_shift = 0, + .window_start = 0, + .window_len = 0x100, + .range_min = 0, + .range_max = 0x7ff, + }, +}; + +static const struct regmap_config spd5118_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x7ff, + .writeable_reg = spd5118_writeable_reg, + .volatile_reg = spd5118_volatile_reg, + .cache_type = REGCACHE_MAPLE, + + .ranges = spd5118_regmap_range_cfg, + .num_ranges = ARRAY_SIZE(spd5118_regmap_range_cfg), +}; + +static int spd5118_init(struct i2c_client *client) +{ + struct i2c_adapter *adapter = client->adapter; + int err, regval, mode; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + regval = i2c_smbus_read_word_swapped(client, SPD5118_REG_TYPE); + if (regval < 0 || (regval && regval != 0x5118)) + return -ENODEV; + + /* + * If the device type registers return 0, it is possible that the chip + * has a non-zero page selected and takes the specification literally, + * i.e. disables access to volatile registers besides the page register + * if the page is not 0. Try to identify such chips. + */ + if (!regval) { + /* Vendor ID registers must also be 0 */ + regval = i2c_smbus_read_word_data(client, SPD5118_REG_VENDOR); + if (regval) + return -ENODEV; + + /* The selected page in MR11 must not be 0 */ + mode = i2c_smbus_read_byte_data(client, SPD5118_REG_I2C_LEGACY_MODE); + if (mode < 0 || (mode & ~SPD5118_LEGACY_MODE_MASK) || + !(mode & SPD5118_LEGACY_PAGE_MASK)) + return -ENODEV; + + err = i2c_smbus_write_byte_data(client, SPD5118_REG_I2C_LEGACY_MODE, + mode & SPD5118_LEGACY_MODE_ADDR); + if (err) + return -ENODEV; + + /* + * If the device type registers are still bad after selecting + * page 0, this is not a SPD5118 device. Restore original + * legacy mode register value and abort. + */ + regval = i2c_smbus_read_word_swapped(client, SPD5118_REG_TYPE); + if (regval != 0x5118) { + i2c_smbus_write_byte_data(client, SPD5118_REG_I2C_LEGACY_MODE, mode); + return -ENODEV; + } + } + + /* We are reasonably sure that this is really a SPD5118 hub controller */ + return 0; +} + +static int spd5118_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + unsigned int regval, revision, vendor, bank; + struct spd5118_data *data; + struct device *hwmon_dev; + struct regmap *regmap; + int err; + + err = spd5118_init(client); + if (err) + return err; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + regmap = devm_regmap_init_i2c(client, &spd5118_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), "regmap init failed\n"); + + err = regmap_read(regmap, SPD5118_REG_CAPABILITY, ®val); + if (err) + return err; + if (!(regval & SPD5118_CAP_TS_SUPPORT)) + return -ENODEV; + + err = regmap_read(regmap, SPD5118_REG_REVISION, &revision); + if (err) + return err; + + err = regmap_read(regmap, SPD5118_REG_VENDOR, &bank); + if (err) + return err; + err = regmap_read(regmap, SPD5118_REG_VENDOR + 1, &vendor); + if (err) + return err; + if (!spd5118_vendor_valid(bank, vendor)) + return -ENODEV; + + data->regmap = regmap; + mutex_init(&data->nvmem_lock); + dev_set_drvdata(dev, data); + + err = spd5118_nvmem_init(dev, data); + /* Ignore if NVMEM support is disabled */ + if (err && err != -EOPNOTSUPP) { + dev_err_probe(dev, err, "failed to register nvmem\n"); + return err; + } + + hwmon_dev = devm_hwmon_device_register_with_info(dev, "spd5118", + regmap, &spd5118_chip_info, + NULL); + if (IS_ERR(hwmon_dev)) + return PTR_ERR(hwmon_dev); + + /* + * From JESD300-5B + * MR2 bits [5:4]: Major revision, 1..4 + * MR2 bits [3:1]: Minor revision, 0..8? Probably a typo, assume 1..8 + */ + dev_info(dev, "DDR5 temperature sensor: vendor 0x%02x:0x%02x revision %d.%d\n", + bank & 0x7f, vendor, ((revision >> 4) & 0x03) + 1, ((revision >> 1) & 0x07) + 1); + + return 0; +} + +static int spd5118_suspend(struct device *dev) +{ + struct spd5118_data *data = dev_get_drvdata(dev); + struct regmap *regmap = data->regmap; + u32 regval; + int err; + + /* + * Make sure the configuration register in the regmap cache is current + * before bypassing it. + */ + err = regmap_read(regmap, SPD5118_REG_TEMP_CONFIG, ®val); + if (err < 0) + return err; + + regcache_cache_bypass(regmap, true); + regmap_update_bits(regmap, SPD5118_REG_TEMP_CONFIG, SPD5118_TS_DISABLE, + SPD5118_TS_DISABLE); + regcache_cache_bypass(regmap, false); + + regcache_cache_only(regmap, true); + regcache_mark_dirty(regmap); + + return 0; +} + +static int spd5118_resume(struct device *dev) +{ + struct spd5118_data *data = dev_get_drvdata(dev); + struct regmap *regmap = data->regmap; + + regcache_cache_only(regmap, false); + return regcache_sync(regmap); +} + +static DEFINE_SIMPLE_DEV_PM_OPS(spd5118_pm_ops, spd5118_suspend, spd5118_resume); + +static const struct i2c_device_id spd5118_id[] = { + { "spd5118", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, spd5118_id); + +static const struct of_device_id spd5118_of_ids[] = { + { .compatible = "jedec,spd5118", }, + { } +}; +MODULE_DEVICE_TABLE(of, spd5118_of_ids); + +static struct i2c_driver spd5118_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "spd5118", + .of_match_table = spd5118_of_ids, + .pm = pm_sleep_ptr(&spd5118_pm_ops), + }, + .probe = spd5118_probe, + .id_table = spd5118_id, + .detect = IS_ENABLED(CONFIG_SENSORS_SPD5118_DETECT) ? spd5118_detect : NULL, + .address_list = IS_ENABLED(CONFIG_SENSORS_SPD5118_DETECT) ? normal_i2c : NULL, +}; + +module_i2c_driver(spd5118_driver); + +MODULE_AUTHOR("RenĂ© Rebe <rene@exactcode.de>"); +MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>"); +MODULE_DESCRIPTION("SPD 5118 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c index 68ba26bc9014..0cbdb91698b1 100644 --- a/drivers/hwmon/thmc50.c +++ b/drivers/hwmon/thmc50.c @@ -377,8 +377,6 @@ static void thmc50_init_client(struct thmc50_data *data) i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config); } -static const struct i2c_device_id thmc50_id[]; - static int thmc50_probe(struct i2c_client *client) { struct device *dev = &client->dev; @@ -391,7 +389,7 @@ static int thmc50_probe(struct i2c_client *client) return -ENOMEM; data->client = client; - data->type = i2c_match_id(thmc50_id, client)->driver_data; + data->type = (uintptr_t)i2c_get_match_data(client); mutex_init(&data->update_lock); thmc50_init_client(data); diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c index df1b45a62e80..853dbe708ff5 100644 --- a/drivers/hwmon/tmp401.c +++ b/drivers/hwmon/tmp401.c @@ -693,7 +693,7 @@ static int tmp401_probe(struct i2c_client *client) data->client = client; mutex_init(&data->update_lock); - data->kind = i2c_match_id(tmp401_id, client)->driver_data; + data->kind = (uintptr_t)i2c_get_match_data(client); data->regmap = devm_regmap_init(dev, NULL, data, &tmp401_regmap_config); if (IS_ERR(data->regmap)) diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c index 10b66c9ce045..7a6f9532e594 100644 --- a/drivers/hwmon/tmp421.c +++ b/drivers/hwmon/tmp421.c @@ -446,11 +446,7 @@ static int tmp421_probe(struct i2c_client *client) return -ENOMEM; mutex_init(&data->update_lock); - if (client->dev.of_node) - data->channels = (unsigned long) - of_device_get_match_data(&client->dev); - else - data->channels = i2c_match_id(tmp421_id, client)->driver_data; + data->channels = (unsigned long)i2c_get_match_data(client); data->client = client; for (i = 0; i < data->channels; i++) { diff --git a/drivers/hwmon/tmp464.c b/drivers/hwmon/tmp464.c index f58ca4c6acb6..3ee1137533d6 100644 --- a/drivers/hwmon/tmp464.c +++ b/drivers/hwmon/tmp464.c @@ -666,10 +666,7 @@ static int tmp464_probe(struct i2c_client *client) mutex_init(&data->update_lock); - if (dev->of_node) - data->channels = (int)(unsigned long)of_device_get_match_data(&client->dev); - else - data->channels = i2c_match_id(tmp464_id, client)->driver_data; + data->channels = (int)(unsigned long)i2c_get_match_data(client); data->regmap = devm_regmap_init_i2c(client, &tmp464_regmap_config); if (IS_ERR(data->regmap)) diff --git a/drivers/hwmon/tmp513.c b/drivers/hwmon/tmp513.c index ea6f4416c124..926d28cd3fab 100644 --- a/drivers/hwmon/tmp513.c +++ b/drivers/hwmon/tmp513.c @@ -159,7 +159,7 @@ static const u8 TMP51X_CURR_INPUT[2] = { TMP51X_BUS_CURRENT_RESULT }; -static struct regmap_config tmp51x_regmap_config = { +static const struct regmap_config tmp51x_regmap_config = { .reg_bits = 8, .val_bits = 16, .max_register = TMP51X_MAX_REGISTER_ADDR, diff --git a/drivers/hwmon/tps23861.c b/drivers/hwmon/tps23861.c index d33ecbac00d6..dfcfb09d9f3c 100644 --- a/drivers/hwmon/tps23861.c +++ b/drivers/hwmon/tps23861.c @@ -117,7 +117,7 @@ struct tps23861_data { struct dentry *debugfs_dir; }; -static struct regmap_config tps23861_regmap_config = { +static const struct regmap_config tps23861_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = 0x6f, diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index fe960c0a624f..7d7d70afde65 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -895,7 +895,7 @@ store_target_temp(struct device *dev, struct device_attribute *attr, if (err < 0) return err; - val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 127); + val = DIV_ROUND_CLOSEST(clamp_val(val, 0, 127000), 1000); mutex_lock(&data->update_lock); data->target_temp[nr] = val; @@ -920,7 +920,7 @@ store_tolerance(struct device *dev, struct device_attribute *attr, return err; /* Limit the temp to 0C - 15C */ - val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 15); + val = DIV_ROUND_CLOSEST(clamp_val(val, 0, 15000), 1000); mutex_lock(&data->update_lock); reg = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[nr]); diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index cba5ec432e6d..b7957c84d235 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -1192,8 +1192,6 @@ static void w83781d_remove_files(struct device *dev) sysfs_remove_group(&dev->kobj, &w83781d_group_other); } -static const struct i2c_device_id w83781d_ids[]; - static int w83781d_probe(struct i2c_client *client) { struct device *dev = &client->dev; @@ -1208,7 +1206,7 @@ static int w83781d_probe(struct i2c_client *client) mutex_init(&data->lock); mutex_init(&data->update_lock); - data->type = i2c_match_id(w83781d_ids, client)->driver_data; + data->type = (uintptr_t)i2c_get_match_data(client); data->client = client; /* attach secondary i2c lm75-like clients */ diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c index c446e00db658..5174db69db5e 100644 --- a/drivers/hwmon/w83795.c +++ b/drivers/hwmon/w83795.c @@ -2134,8 +2134,6 @@ static void w83795_apply_temp_config(struct w83795_data *data, u8 config, } } -static const struct i2c_device_id w83795_id[]; - static int w83795_probe(struct i2c_client *client) { int i; @@ -2149,7 +2147,7 @@ static int w83795_probe(struct i2c_client *client) return -ENOMEM; i2c_set_clientdata(client, data); - data->chip_type = i2c_match_id(w83795_id, client)->driver_data; + data->chip_type = (uintptr_t)i2c_get_match_data(client); data->bank = i2c_smbus_read_byte_data(client, W83795_REG_BANKSEL); mutex_init(&data->update_lock); diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c index 97f338b123b1..f809f0ef2004 100644 --- a/drivers/i2c/i2c-smbus.c +++ b/drivers/i2c/i2c-smbus.c @@ -308,7 +308,7 @@ EXPORT_SYMBOL_GPL(i2c_free_slave_host_notify_device); * target systems are the same. * Restrictions to automatic SPD instantiation: * - Only works if all filled slots have the same memory type - * - Only works for DDR, DDR2, DDR3 and DDR4 for now + * - Only works for (LP)DDR memory types up to DDR5 * - Only works on systems with 1 to 8 memory slots */ #if IS_ENABLED(CONFIG_DMI) @@ -382,6 +382,10 @@ void i2c_register_spd(struct i2c_adapter *adap) case 0x1E: /* LPDDR4 */ name = "ee1004"; break; + case 0x22: /* DDR5 */ + case 0x23: /* LPDDR5 */ + name = "spd5118"; + break; default: dev_info(&adap->dev, "Memory type 0x%02x not supported yet, not instantiating SPD\n", diff --git a/include/linux/hwmon.h b/include/linux/hwmon.h index edf96f249eb5..e94314760aab 100644 --- a/include/linux/hwmon.h +++ b/include/linux/hwmon.h @@ -45,6 +45,7 @@ enum hwmon_chip_attributes { hwmon_chip_power_samples, hwmon_chip_temp_samples, hwmon_chip_beep_enable, + hwmon_chip_pec, }; #define HWMON_C_TEMP_RESET_HISTORY BIT(hwmon_chip_temp_reset_history) @@ -60,6 +61,7 @@ enum hwmon_chip_attributes { #define HWMON_C_POWER_SAMPLES BIT(hwmon_chip_power_samples) #define HWMON_C_TEMP_SAMPLES BIT(hwmon_chip_temp_samples) #define HWMON_C_BEEP_ENABLE BIT(hwmon_chip_beep_enable) +#define HWMON_C_PEC BIT(hwmon_chip_pec) enum hwmon_temp_attributes { hwmon_temp_enable, |