Merge tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from rxrpc.

  The rxrpc changes are noticeable large: to address a recent regression
  has been necessary completing the threaded refactor.

  Current release - regressions:

   - rxrpc:
       - only disconnect calls in the I/O thread
       - move client call connection to the I/O thread
       - fix incoming call setup race

   - eth: mlx5:
       - restore pkt rate policing support
       - fix memory leak on updating vport counters

  Previous releases - regressions:

   - gro: take care of DODGY packets

   - ipv6: deduct extension header length in rawv6_push_pending_frames

   - tipc: fix unexpected link reset due to discovery messages

  Previous releases - always broken:

   - sched: disallow noqueue for qdisc classes

   - eth: ice: fix potential memory leak in ice_gnss_tty_write()

   - eth: ixgbe: fix pci device refcount leak

   - eth: mlx5:
       - fix command stats access after free
       - fix macsec possible null dereference when updating MAC security
         entity (SecY)"

* tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
  r8152: add vendor/device ID pair for Microsoft Devkit
  net: stmmac: add aux timestamps fifo clearance wait
  bnxt: make sure we return pages to the pool
  net: hns3: fix wrong use of rss size during VF rss config
  ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
  net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()
  net: sched: disallow noqueue for qdisc classes
  iavf/iavf_main: actually log ->src mask when talking about it
  igc: Fix PPS delta between two synchronized end-points
  ixgbe: fix pci device refcount leak
  octeontx2-pf: Fix resource leakage in VF driver unbind
  selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
  selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
  selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".
  net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
  net/mlx5e: Fix macsec ssci attribute handling in offload path
  net/mlx5: E-switch, Coverity: overlapping copy
  net/mlx5e: Don't support encap rules with gbp option
  net/mlx5: Fix ptp max frequency adjustment range
  net/mlx5e: Fix memory leak on updating vport counters
  ...

2 files changed, 130 insertions, 74 deletions

diff --git a/tools/testing/selftests/net/af_unix/test_unix_oob.c b/tools/testing/selftests/net/af_unix/test_unix_oob.c
index b57e91e1c3f2..532459a15067 100644
--- a/tools/testing/selftests/net/af_unix/test_unix_oob.c
+++ b/tools/testing/selftests/net/af_unix/test_unix_oob.c
@@ -124,7 +124,7 @@ void producer(struct sockaddr_un *consumer_addr)
 
 	wait_for_signal(pipefd[0]);
 	if (connect(cfd, (struct sockaddr *)consumer_addr,
-		     sizeof(struct sockaddr)) != 0) {
+		     sizeof(*consumer_addr)) != 0) {
 		perror("Connect failed");
 		kill(0, SIGTERM);
 		exit(1);
diff --git a/tools/testing/selftests/net/l2_tos_ttl_inherit.sh b/tools/testing/selftests/net/l2_tos_ttl_inherit.sh
index dca1e6f777a8..f11756e7df2f 100755
--- a/tools/testing/selftests/net/l2_tos_ttl_inherit.sh
+++ b/tools/testing/selftests/net/l2_tos_ttl_inherit.sh
@@ -12,19 +12,27 @@
 # In addition this script also checks if forcing a specific field in the
 # outer header is working.
 
+# Return 4 by default (Kselftest SKIP code)
+ERR=4
+
 if [ "$(id -u)" != "0" ]; then
 	echo "Please run as root."
-	exit 0
+	exit $ERR
 fi
 if ! which tcpdump > /dev/null 2>&1; then
 	echo "No tcpdump found. Required for this test."
-	exit 0
+	exit $ERR
 fi
 
 expected_tos="0x00"
 expected_ttl="0"
 failed=false
 
+readonly NS0=$(mktemp -u ns0-XXXXXXXX)
+readonly NS1=$(mktemp -u ns1-XXXXXXXX)
+
+RUN_NS0="ip netns exec ${NS0}"
+
 get_random_tos() {
 	# Get a random hex tos value between 0x00 and 0xfc, a multiple of 4
 	echo "0x$(tr -dc '0-9a-f' < /dev/urandom | head -c 1)\
@@ -61,7 +69,6 @@ setup() {
 	local vlan="$5"
 	local test_tos="0x00"
 	local test_ttl="0"
-	local ns="ip netns exec testing"
 
 	# We don't want a test-tos of 0x00,
 	# because this is the value that we get when no tos is set.
@@ -94,14 +101,15 @@ setup() {
 	printf "│%7s │%6s │%6s │%13s │%13s │%6s │" \
 	"$type" "$outer" "$inner" "$tos" "$ttl" "$vlan"
 
-	# Create 'testing' netns, veth pair and connect main ns with testing ns
-	ip netns add testing
-	ip link add type veth
-	ip link set veth1 netns testing
-	ip link set veth0 up
-	$ns ip link set veth1 up
-	ip addr flush dev veth0
-	$ns ip addr flush dev veth1
+	# Create netns NS0 and NS1 and connect them with a veth pair
+	ip netns add "${NS0}"
+	ip netns add "${NS1}"
+	ip link add name veth0 netns "${NS0}" type veth \
+		peer name veth1 netns "${NS1}"
+	ip -netns "${NS0}" link set dev veth0 up
+	ip -netns "${NS1}" link set dev veth1 up
+	ip -netns "${NS0}" address flush dev veth0
+	ip -netns "${NS1}" address flush dev veth1
 
 	local local_addr1=""
 	local local_addr2=""
@@ -127,51 +135,59 @@ setup() {
 		if [ "$type" = "gre" ]; then
 			type="gretap"
 		fi
-		ip addr add 198.18.0.1/24 dev veth0
-		$ns ip addr add 198.18.0.2/24 dev veth1
-		ip link add name tep0 type $type $local_addr1 remote \
-		198.18.0.2 tos $test_tos ttl $test_ttl $vxlan $geneve
-		$ns ip link add name tep1 type $type $local_addr2 remote \
-		198.18.0.1 tos $test_tos ttl $test_ttl $vxlan $geneve
+		ip -netns "${NS0}" address add 198.18.0.1/24 dev veth0
+		ip -netns "${NS1}" address add 198.18.0.2/24 dev veth1
+		ip -netns "${NS0}" link add name tep0 type $type $local_addr1 \
+			remote 198.18.0.2 tos $test_tos ttl $test_ttl         \
+			$vxlan $geneve
+		ip -netns "${NS1}" link add name tep1 type $type $local_addr2 \
+			remote 198.18.0.1 tos $test_tos ttl $test_ttl         \
+			$vxlan $geneve
 	elif [ "$outer" = "6" ]; then
 		if [ "$type" = "gre" ]; then
 			type="ip6gretap"
 		fi
-		ip addr add fdd1:ced0:5d88:3fce::1/64 dev veth0
-		$ns ip addr add fdd1:ced0:5d88:3fce::2/64 dev veth1
-		ip link add name tep0 type $type $local_addr1 \
-		remote fdd1:ced0:5d88:3fce::2 tos $test_tos ttl $test_ttl \
-		$vxlan $geneve
-		$ns ip link add name tep1 type $type $local_addr2 \
-		remote fdd1:ced0:5d88:3fce::1 tos $test_tos ttl $test_ttl \
-		$vxlan $geneve
+		ip -netns "${NS0}" address add fdd1:ced0:5d88:3fce::1/64 \
+			dev veth0 nodad
+		ip -netns "${NS1}" address add fdd1:ced0:5d88:3fce::2/64 \
+			dev veth1 nodad
+		ip -netns "${NS0}" link add name tep0 type $type $local_addr1 \
+			remote fdd1:ced0:5d88:3fce::2 tos $test_tos           \
+			ttl $test_ttl $vxlan $geneve
+		ip -netns "${NS1}" link add name tep1 type $type $local_addr2 \
+			remote fdd1:ced0:5d88:3fce::1 tos $test_tos           \
+			ttl $test_ttl $vxlan $geneve
 	fi
 
 	# Bring L2-tunnel link up and create VLAN on top
-	ip link set tep0 up
-	$ns ip link set tep1 up
-	ip addr flush dev tep0
-	$ns ip addr flush dev tep1
+	ip -netns "${NS0}" link set tep0 up
+	ip -netns "${NS1}" link set tep1 up
+	ip -netns "${NS0}" address flush dev tep0
+	ip -netns "${NS1}" address flush dev tep1
 	local parent
 	if $vlan; then
 		parent="vlan99-"
-		ip link add link tep0 name ${parent}0 type vlan id 99
-		$ns ip link add link tep1 name ${parent}1 type vlan id 99
-		ip link set ${parent}0 up
-		$ns ip link set ${parent}1 up
-		ip addr flush dev ${parent}0
-		$ns ip addr flush dev ${parent}1
+		ip -netns "${NS0}" link add link tep0 name ${parent}0 \
+			type vlan id 99
+		ip -netns "${NS1}" link add link tep1 name ${parent}1 \
+			type vlan id 99
+		ip -netns "${NS0}" link set dev ${parent}0 up
+		ip -netns "${NS1}" link set dev ${parent}1 up
+		ip -netns "${NS0}" address flush dev ${parent}0
+		ip -netns "${NS1}" address flush dev ${parent}1
 	else
 		parent="tep"
 	fi
 
 	# Assign inner IPv4/IPv6 addresses
 	if [ "$inner" = "4" ] || [ "$inner" = "other" ]; then
-		ip addr add 198.19.0.1/24 brd + dev ${parent}0
-		$ns ip addr add 198.19.0.2/24 brd + dev ${parent}1
+		ip -netns "${NS0}" address add 198.19.0.1/24 brd + dev ${parent}0
+		ip -netns "${NS1}" address add 198.19.0.2/24 brd + dev ${parent}1
 	elif [ "$inner" = "6" ]; then
-		ip addr add fdd4:96cf:4eae:443b::1/64 dev ${parent}0
-		$ns ip addr add fdd4:96cf:4eae:443b::2/64 dev ${parent}1
+		ip -netns "${NS0}" address add fdd4:96cf:4eae:443b::1/64 \
+			dev ${parent}0 nodad
+		ip -netns "${NS1}" address add fdd4:96cf:4eae:443b::2/64 \
+			dev ${parent}1 nodad
 	fi
 }
 
@@ -192,10 +208,10 @@ verify() {
 		ping_dst="198.19.0.3" # Generates ARPs which are not IPv4/IPv6
 	fi
 	if [ "$tos_ttl" = "inherit" ]; then
-		ping -i 0.1 $ping_dst -Q "$expected_tos" -t "$expected_ttl" \
-		2>/dev/null 1>&2 & ping_pid="$!"
+		${RUN_NS0} ping -i 0.1 $ping_dst -Q "$expected_tos"          \
+			 -t "$expected_ttl" 2>/dev/null 1>&2 & ping_pid="$!"
 	else
-		ping -i 0.1 $ping_dst 2>/dev/null 1>&2 & ping_pid="$!"
+		${RUN_NS0} ping -i 0.1 $ping_dst 2>/dev/null 1>&2 & ping_pid="$!"
 	fi
 	local tunnel_type_offset tunnel_type_proto req_proto_offset req_offset
 	if [ "$type" = "gre" ]; then
@@ -216,10 +232,12 @@ verify() {
 				req_proto_offset="$((req_proto_offset + 4))"
 				req_offset="$((req_offset + 4))"
 			fi
-			out="$(tcpdump --immediate-mode -p -c 1 -v -i veth0 -n \
-			ip[$tunnel_type_offset] = $tunnel_type_proto and \
-			ip[$req_proto_offset] = 0x01 and \
-			ip[$req_offset] = 0x08 2>/dev/null | head -n 1)"
+			out="$(${RUN_NS0} tcpdump --immediate-mode -p -c 1 -v \
+				-i veth0 -n                                   \
+				ip[$tunnel_type_offset] = $tunnel_type_proto and \
+				ip[$req_proto_offset] = 0x01 and              \
+				ip[$req_offset] = 0x08 2>/dev/null            \
+				| head -n 1)"
 		elif [ "$inner" = "6" ]; then
 			req_proto_offset="44"
 			req_offset="78"
@@ -231,10 +249,12 @@ verify() {
 				req_proto_offset="$((req_proto_offset + 4))"
 				req_offset="$((req_offset + 4))"
 			fi
-			out="$(tcpdump --immediate-mode -p -c 1 -v -i veth0 -n \
-			ip[$tunnel_type_offset] = $tunnel_type_proto and \
-			ip[$req_proto_offset] = 0x3a and \
-			ip[$req_offset] = 0x80 2>/dev/null | head -n 1)"
+			out="$(${RUN_NS0} tcpdump --immediate-mode -p -c 1 -v \
+				-i veth0 -n                                   \
+				ip[$tunnel_type_offset] = $tunnel_type_proto and \
+				ip[$req_proto_offset] = 0x3a and              \
+				ip[$req_offset] = 0x80 2>/dev/null            \
+				| head -n 1)"
 		elif [ "$inner" = "other" ]; then
 			req_proto_offset="36"
 			req_offset="45"
@@ -250,11 +270,13 @@ verify() {
 				expected_tos="0x00"
 				expected_ttl="64"
 			fi
-			out="$(tcpdump --immediate-mode -p -c 1 -v -i veth0 -n \
-			ip[$tunnel_type_offset] = $tunnel_type_proto and \
-			ip[$req_proto_offset] = 0x08 and \
-			ip[$((req_proto_offset + 1))] = 0x06 and \
-			ip[$req_offset] = 0x01 2>/dev/null | head -n 1)"
+			out="$(${RUN_NS0} tcpdump --immediate-mode -p -c 1 -v \
+				-i veth0 -n                                   \
+				ip[$tunnel_type_offset] = $tunnel_type_proto and \
+				ip[$req_proto_offset] = 0x08 and              \
+				ip[$((req_proto_offset + 1))] = 0x06 and      \
+				ip[$req_offset] = 0x01 2>/dev/null            \
+				| head -n 1)"
 		fi
 	elif [ "$outer" = "6" ]; then
 		if [ "$type" = "gre" ]; then
@@ -273,10 +295,12 @@ verify() {
 				req_proto_offset="$((req_proto_offset + 4))"
 				req_offset="$((req_offset + 4))"
 			fi
-			out="$(tcpdump --immediate-mode -p -c 1 -v -i veth0 -n \
-			ip6[$tunnel_type_offset] = $tunnel_type_proto and \
-			ip6[$req_proto_offset] = 0x01 and \
-			ip6[$req_offset] = 0x08 2>/dev/null | head -n 1)"
+			out="$(${RUN_NS0} tcpdump --immediate-mode -p -c 1 -v \
+				-i veth0 -n                                   \
+				ip6[$tunnel_type_offset] = $tunnel_type_proto and \
+				ip6[$req_proto_offset] = 0x01 and             \
+				ip6[$req_offset] = 0x08 2>/dev/null           \
+				| head -n 1)"
 		elif [ "$inner" = "6" ]; then
 			local req_proto_offset="72"
 			local req_offset="106"
@@ -288,10 +312,12 @@ verify() {
 				req_proto_offset="$((req_proto_offset + 4))"
 				req_offset="$((req_offset + 4))"
 			fi
-			out="$(tcpdump --immediate-mode -p -c 1 -v -i veth0 -n \
-			ip6[$tunnel_type_offset] = $tunnel_type_proto and \
-			ip6[$req_proto_offset] = 0x3a and \
-			ip6[$req_offset] = 0x80 2>/dev/null | head -n 1)"
+			out="$(${RUN_NS0} tcpdump --immediate-mode -p -c 1 -v \
+				-i veth0 -n                                   \
+				ip6[$tunnel_type_offset] = $tunnel_type_proto and \
+				ip6[$req_proto_offset] = 0x3a and             \
+				ip6[$req_offset] = 0x80 2>/dev/null           \
+				| head -n 1)"
 		elif [ "$inner" = "other" ]; then
 			local req_proto_offset="64"
 			local req_offset="73"
@@ -307,15 +333,17 @@ verify() {
 				expected_tos="0x00"
 				expected_ttl="64"
 			fi
-			out="$(tcpdump --immediate-mode -p -c 1 -v -i veth0 -n \
-			ip6[$tunnel_type_offset] = $tunnel_type_proto and \
-			ip6[$req_proto_offset] = 0x08 and \
-			ip6[$((req_proto_offset + 1))] = 0x06 and \
-			ip6[$req_offset] = 0x01 2>/dev/null | head -n 1)"
+			out="$(${RUN_NS0} tcpdump --immediate-mode -p -c 1 -v \
+				-i veth0 -n                                   \
+				ip6[$tunnel_type_offset] = $tunnel_type_proto and \
+				ip6[$req_proto_offset] = 0x08 and             \
+				ip6[$((req_proto_offset + 1))] = 0x06 and     \
+				ip6[$req_offset] = 0x01 2>/dev/null           \
+				| head -n 1)"
 		fi
 	fi
 	kill -9 $ping_pid
-	wait $ping_pid 2>/dev/null
+	wait $ping_pid 2>/dev/null || true
 	result="FAIL"
 	if [ "$outer" = "4" ]; then
 		captured_ttl="$(get_field "ttl" "$out")"
@@ -351,11 +379,35 @@ verify() {
 }
 
 cleanup() {
-	ip link del veth0 2>/dev/null
-	ip netns del testing 2>/dev/null
-	ip link del tep0 2>/dev/null
+	ip netns del "${NS0}" 2>/dev/null
+	ip netns del "${NS1}" 2>/dev/null
 }
 
+exit_handler() {
+	# Don't exit immediately if one of the intermediate commands fails.
+	# We might be called at the end of the script, when the network
+	# namespaces have already been deleted. So cleanup() may fail, but we
+	# still need to run until 'exit $ERR' or the script won't return the
+	# correct error code.
+	set +e
+
+	cleanup
+
+	exit $ERR
+}
+
+# Restore the default SIGINT handler (just in case) and exit.
+# The exit handler will take care of cleaning everything up.
+interrupted() {
+	trap - INT
+
+	exit $ERR
+}
+
+set -e
+trap exit_handler EXIT
+trap interrupted INT
+
 printf "┌────────┬───────┬───────┬──────────────┬"
 printf "──────────────┬───────┬────────┐\n"
 for type in gre vxlan geneve; do
@@ -385,6 +437,10 @@ done
 printf "└────────┴───────┴───────┴──────────────┴"
 printf "──────────────┴───────┴────────┘\n"
 
+# All tests done.
+# Set ERR appropriately: it will be returned by the exit handler.
 if $failed; then
-	exit 1
+	ERR=1
+else
+	ERR=0
 fi