Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

1 files changed, 284 insertions, 0 deletions

diff --git a/net/mac80211/tests/tpe.c b/net/mac80211/tests/tpe.c
new file mode 100644
index 000000000000..dd63303a2985
--- /dev/null
+++ b/net/mac80211/tests/tpe.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * KUnit tests for TPE element handling
+ *
+ * Copyright (C) 2024 Intel Corporation
+ */
+#include <kunit/test.h>
+#include "../ieee80211_i.h"
+
+MODULE_IMPORT_NS(EXPORTED_FOR_KUNIT_TESTING);
+
+static struct ieee80211_channel chan6g_1 = {
+	.band = NL80211_BAND_6GHZ,
+	.center_freq = 5955,
+};
+
+static struct ieee80211_channel chan6g_33 = {
+	.band = NL80211_BAND_6GHZ,
+	.center_freq = 6115,
+};
+
+static struct ieee80211_channel chan6g_61 = {
+	.band = NL80211_BAND_6GHZ,
+	.center_freq = 6255,
+};
+
+static const struct subchan_test_case {
+	const char *desc;
+	struct cfg80211_chan_def c;
+	u8 n;
+	int expect;
+} subchan_offset_cases[] = {
+	{
+		.desc = "identical 20 MHz",
+		.c.width = NL80211_CHAN_WIDTH_20,
+		.c.chan = &chan6g_1,
+		.c.center_freq1 = 5955,
+		.n = 1,
+		.expect = 0,
+	},
+	{
+		.desc = "identical 40 MHz",
+		.c.width = NL80211_CHAN_WIDTH_40,
+		.c.chan = &chan6g_1,
+		.c.center_freq1 = 5965,
+		.n = 2,
+		.expect = 0,
+	},
+	{
+		.desc = "identical 80+80 MHz",
+		/* not really is valid? doesn't matter for the test */
+		.c.width = NL80211_CHAN_WIDTH_80P80,
+		.c.chan = &chan6g_1,
+		.c.center_freq1 = 5985,
+		.c.center_freq2 = 6225,
+		.n = 16,
+		.expect = 0,
+	},
+	{
+		.desc = "identical 320 MHz",
+		.c.width = NL80211_CHAN_WIDTH_320,
+		.c.chan = &chan6g_1,
+		.c.center_freq1 = 6105,
+		.n = 16,
+		.expect = 0,
+	},
+	{
+		.desc = "lower 160 MHz of 320 MHz",
+		.c.width = NL80211_CHAN_WIDTH_320,
+		.c.chan = &chan6g_1,
+		.c.center_freq1 = 6105,
+		.n = 8,
+		.expect = 0,
+	},
+	{
+		.desc = "upper 160 MHz of 320 MHz",
+		.c.width = NL80211_CHAN_WIDTH_320,
+		.c.chan = &chan6g_61,
+		.c.center_freq1 = 6105,
+		.n = 8,
+		.expect = 8,
+	},
+	{
+		.desc = "upper 160 MHz of 320 MHz, go to 40",
+		.c.width = NL80211_CHAN_WIDTH_320,
+		.c.chan = &chan6g_61,
+		.c.center_freq1 = 6105,
+		.n = 2,
+		.expect = 8 + 4 + 2,
+	},
+	{
+		.desc = "secondary 80 above primary in 80+80 MHz",
+		/* not really is valid? doesn't matter for the test */
+		.c.width = NL80211_CHAN_WIDTH_80P80,
+		.c.chan = &chan6g_1,
+		.c.center_freq1 = 5985,
+		.c.center_freq2 = 6225,
+		.n = 4,
+		.expect = 0,
+	},
+	{
+		.desc = "secondary 80 below primary in 80+80 MHz",
+		/* not really is valid? doesn't matter for the test */
+		.c.width = NL80211_CHAN_WIDTH_80P80,
+		.c.chan = &chan6g_61,
+		.c.center_freq1 = 6225,
+		.c.center_freq2 = 5985,
+		.n = 4,
+		.expect = 4,
+	},
+	{
+		.desc = "secondary 80 below primary in 80+80 MHz, go to 20",
+		/* not really is valid? doesn't matter for the test */
+		.c.width = NL80211_CHAN_WIDTH_80P80,
+		.c.chan = &chan6g_61,
+		.c.center_freq1 = 6225,
+		.c.center_freq2 = 5985,
+		.n = 1,
+		.expect = 7,
+	},
+};
+
+KUNIT_ARRAY_PARAM_DESC(subchan_offset, subchan_offset_cases, desc);
+
+static void subchan_offset(struct kunit *test)
+{
+	const struct subchan_test_case *params = test->param_value;
+	int offset;
+
+	KUNIT_ASSERT_EQ(test, cfg80211_chandef_valid(&params->c), true);
+
+	offset = ieee80211_calc_chandef_subchan_offset(&params->c, params->n);
+
+	KUNIT_EXPECT_EQ(test, params->expect, offset);
+}
+
+static const struct psd_reorder_test_case {
+	const char *desc;
+	struct cfg80211_chan_def ap, used;
+	struct ieee80211_parsed_tpe_psd psd, out;
+} psd_reorder_cases[] = {
+	{
+		.desc = "no changes, 320 MHz",
+
+		.ap.width = NL80211_CHAN_WIDTH_320,
+		.ap.chan = &chan6g_1,
+		.ap.center_freq1 = 6105,
+
+		.used.width = NL80211_CHAN_WIDTH_320,
+		.used.chan = &chan6g_1,
+		.used.center_freq1 = 6105,
+
+		.psd.valid = true,
+		.psd.count = 16,
+		.psd.n = 8,
+		.psd.power = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 },
+
+		.out.valid = true,
+		.out.count = 16,
+		.out.n = 8,
+		.out.power = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 },
+	},
+	{
+		.desc = "no changes, 320 MHz, 160 MHz used, n=0",
+
+		.ap.width = NL80211_CHAN_WIDTH_320,
+		.ap.chan = &chan6g_1,
+		.ap.center_freq1 = 6105,
+
+		.used.width = NL80211_CHAN_WIDTH_160,
+		.used.chan = &chan6g_1,
+		.used.center_freq1 = 6025,
+
+		.psd.valid = true,
+		.psd.count = 16,
+		.psd.n = 0,
+		.psd.power = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, },
+
+		.out.valid = true,
+		.out.count = 8,
+		.out.n = 0,
+		.out.power = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, },
+	},
+	{
+		.desc = "320 MHz, HE is 80, used 160, all lower",
+
+		.ap.width = NL80211_CHAN_WIDTH_320,
+		.ap.chan = &chan6g_1,
+		.ap.center_freq1 = 6105,
+
+		.used.width = NL80211_CHAN_WIDTH_160,
+		.used.chan = &chan6g_1,
+		.used.center_freq1 = 6025,
+
+		.psd.valid = true,
+		.psd.count = 16,
+		.psd.n = 4,
+		.psd.power = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 },
+
+		.out.valid = true,
+		.out.count = 8,
+		.out.n = 4,
+		.out.power = { 0, 1, 2, 3, 4, 5, 6, 7, 127, 127, 127, 127, 127, 127, 127, 127},
+	},
+	{
+		.desc = "320 MHz, HE is 80, used 160, all upper",
+		/*
+		 * EHT: | | | | | | | | | | | | | | | | |
+		 * HE:                          | | | | |
+		 * used:                | | | | | | | | |
+		 */
+
+		.ap.width = NL80211_CHAN_WIDTH_320,
+		.ap.chan = &chan6g_61,
+		.ap.center_freq1 = 6105,
+
+		.used.width = NL80211_CHAN_WIDTH_160,
+		.used.chan = &chan6g_61,
+		.used.center_freq1 = 6185,
+
+		.psd.valid = true,
+		.psd.count = 16,
+		.psd.n = 4,
+		.psd.power = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 },
+
+		.out.valid = true,
+		.out.count = 8,
+		.out.n = 4,
+		.out.power = { 12, 13, 14, 15, 0, 1, 2, 3, 127, 127, 127, 127, 127, 127, 127, 127},
+	},
+	{
+		.desc = "320 MHz, HE is 80, used 160, split",
+		/*
+		 * EHT: | | | | | | | | | | | | | | | | |
+		 * HE:                  | | | | |
+		 * used:                | | | | | | | | |
+		 */
+
+		.ap.width = NL80211_CHAN_WIDTH_320,
+		.ap.chan = &chan6g_33,
+		.ap.center_freq1 = 6105,
+
+		.used.width = NL80211_CHAN_WIDTH_160,
+		.used.chan = &chan6g_33,
+		.used.center_freq1 = 6185,
+
+		.psd.valid = true,
+		.psd.count = 16,
+		.psd.n = 4,
+		.psd.power = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 },
+
+		.out.valid = true,
+		.out.count = 8,
+		.out.n = 4,
+		.out.power = { 0, 1, 2, 3, 12, 13, 14, 15, 127, 127, 127, 127, 127, 127, 127, 127},
+	},
+};
+
+KUNIT_ARRAY_PARAM_DESC(psd_reorder, psd_reorder_cases, desc);
+
+static void psd_reorder(struct kunit *test)
+{
+	const struct psd_reorder_test_case *params = test->param_value;
+	struct ieee80211_parsed_tpe_psd tmp = params->psd;
+
+	KUNIT_ASSERT_EQ(test, cfg80211_chandef_valid(&params->ap), true);
+	KUNIT_ASSERT_EQ(test, cfg80211_chandef_valid(&params->used), true);
+
+	ieee80211_rearrange_tpe_psd(&tmp, &params->ap, &params->used);
+	KUNIT_EXPECT_MEMEQ(test, &tmp, &params->out, sizeof(tmp));
+}
+
+static struct kunit_case tpe_test_cases[] = {
+	KUNIT_CASE_PARAM(subchan_offset, subchan_offset_gen_params),
+	KUNIT_CASE_PARAM(psd_reorder, psd_reorder_gen_params),
+	{}
+};
+
+static struct kunit_suite tpe = {
+	.name = "mac80211-tpe",
+	.test_cases = tpe_test_cases,
+};
+
+kunit_test_suite(tpe);