Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

11 files changed, 257 insertions, 160 deletions

diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 8e698bea99a3..2dfe9063613f 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -129,7 +129,7 @@ config NET_DSA_TAG_RTL4_A
 	tristate "Tag driver for Realtek 4 byte protocol A tags"
 	help
 	  Say Y or M if you want to enable support for tagging frames for the
-	  Realtek switches with 4 byte protocol A tags, sich as found in
+	  Realtek switches with 4 byte protocol A tags, such as found in
 	  the Realtek RTL8366RB.
 
 config NET_DSA_TAG_RTL8_4
@@ -166,6 +166,12 @@ config NET_DSA_TAG_TRAILER
 	  Say Y or M if you want to enable support for tagging frames at
 	  with a trailed. e.g. Marvell 88E6060.
 
+config NET_DSA_TAG_VSC73XX_8021Q
+	tristate "Tag driver for Microchip/Vitesse VSC73xx family of switches, using VLAN"
+	help
+	  Say Y or M if you want to enable support for tagging frames with a
+	  custom VLAN-based header.
+
 config NET_DSA_TAG_XRS700X
 	tristate "Tag driver for XRS700x switches"
 	help
diff --git a/net/dsa/Makefile b/net/dsa/Makefile
index 8a1894a42552..555c07cfeb71 100644
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_NET_DSA_TAG_RTL8_4) += tag_rtl8_4.o
 obj-$(CONFIG_NET_DSA_TAG_RZN1_A5PSW) += tag_rzn1_a5psw.o
 obj-$(CONFIG_NET_DSA_TAG_SJA1105) += tag_sja1105.o
 obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
+obj-$(CONFIG_NET_DSA_TAG_VSC73XX_8021Q) += tag_vsc73xx_8021q.o
 obj-$(CONFIG_NET_DSA_TAG_XRS700X) += tag_xrs700x.o
 
 # for tracing framework to find trace.h
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 12521a7d4048..668c729946ea 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -1507,9 +1507,7 @@ static int dsa_switch_probe(struct dsa_switch *ds)
 
 	if (ds->phylink_mac_ops) {
 		if (ds->ops->phylink_mac_select_pcs ||
-		    ds->ops->phylink_mac_prepare ||
 		    ds->ops->phylink_mac_config ||
-		    ds->ops->phylink_mac_finish ||
 		    ds->ops->phylink_mac_link_down ||
 		    ds->ops->phylink_mac_link_up)
 			return -EINVAL;
diff --git a/net/dsa/port.c b/net/dsa/port.c
index 9a249d4ac3a5..25258b33e59e 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -1467,10 +1467,34 @@ int dsa_port_change_conduit(struct dsa_port *dp, struct net_device *conduit,
 	 */
 	dsa_user_unsync_ha(dev);
 
+	/* If live-changing, we also need to uninstall the user device address
+	 * from the port FDB and the conduit interface.
+	 */
+	if (dev->flags & IFF_UP)
+		dsa_user_host_uc_uninstall(dev);
+
 	err = dsa_port_assign_conduit(dp, conduit, extack, true);
 	if (err)
 		goto rewind_old_addrs;
 
+	/* If the port doesn't have its own MAC address and relies on the DSA
+	 * conduit's one, inherit it again from the new DSA conduit.
+	 */
+	if (is_zero_ether_addr(dp->mac))
+		eth_hw_addr_inherit(dev, conduit);
+
+	/* If live-changing, we need to install the user device address to the
+	 * port FDB and the conduit interface.
+	 */
+	if (dev->flags & IFF_UP) {
+		err = dsa_user_host_uc_install(dev, dev->dev_addr);
+		if (err) {
+			NL_SET_ERR_MSG_MOD(extack,
+					   "Failed to install host UC address");
+			goto rewind_addr_inherit;
+		}
+	}
+
 	dsa_user_sync_ha(dev);
 
 	if (vlan_filtering) {
@@ -1500,10 +1524,26 @@ rewind_new_vlan:
 rewind_new_addrs:
 	dsa_user_unsync_ha(dev);
 
+	if (dev->flags & IFF_UP)
+		dsa_user_host_uc_uninstall(dev);
+
+rewind_addr_inherit:
+	if (is_zero_ether_addr(dp->mac))
+		eth_hw_addr_inherit(dev, old_conduit);
+
 	dsa_port_assign_conduit(dp, old_conduit, NULL, false);
 
 /* Restore the objects on the old CPU port */
 rewind_old_addrs:
+	if (dev->flags & IFF_UP) {
+		tmp = dsa_user_host_uc_install(dev, dev->dev_addr);
+		if (tmp) {
+			dev_err(ds->dev,
+				"port %d failed to restore host UC address: %pe\n",
+				dp->index, ERR_PTR(tmp));
+		}
+	}
+
 	dsa_user_sync_ha(dev);
 
 	if (vlan_filtering) {
@@ -1549,21 +1589,6 @@ dsa_port_phylink_mac_select_pcs(struct phylink_config *config,
 	return pcs;
 }
 
-static int dsa_port_phylink_mac_prepare(struct phylink_config *config,
-					unsigned int mode,
-					phy_interface_t interface)
-{
-	struct dsa_port *dp = dsa_phylink_to_port(config);
-	struct dsa_switch *ds = dp->ds;
-	int err = 0;
-
-	if (ds->ops->phylink_mac_prepare)
-		err = ds->ops->phylink_mac_prepare(ds, dp->index, mode,
-						   interface);
-
-	return err;
-}
-
 static void dsa_port_phylink_mac_config(struct phylink_config *config,
 					unsigned int mode,
 					const struct phylink_link_state *state)
@@ -1577,21 +1602,6 @@ static void dsa_port_phylink_mac_config(struct phylink_config *config,
 	ds->ops->phylink_mac_config(ds, dp->index, mode, state);
 }
 
-static int dsa_port_phylink_mac_finish(struct phylink_config *config,
-				       unsigned int mode,
-				       phy_interface_t interface)
-{
-	struct dsa_port *dp = dsa_phylink_to_port(config);
-	struct dsa_switch *ds = dp->ds;
-	int err = 0;
-
-	if (ds->ops->phylink_mac_finish)
-		err = ds->ops->phylink_mac_finish(ds, dp->index, mode,
-						  interface);
-
-	return err;
-}
-
 static void dsa_port_phylink_mac_link_down(struct phylink_config *config,
 					   unsigned int mode,
 					   phy_interface_t interface)
@@ -1624,9 +1634,7 @@ static void dsa_port_phylink_mac_link_up(struct phylink_config *config,
 
 static const struct phylink_mac_ops dsa_port_phylink_mac_ops = {
 	.mac_select_pcs = dsa_port_phylink_mac_select_pcs,
-	.mac_prepare = dsa_port_phylink_mac_prepare,
 	.mac_config = dsa_port_phylink_mac_config,
-	.mac_finish = dsa_port_phylink_mac_finish,
 	.mac_link_down = dsa_port_phylink_mac_link_down,
 	.mac_link_up = dsa_port_phylink_mac_link_up,
 };
diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c
index 71b26ae6db39..3ee53e28ec2e 100644
--- a/net/dsa/tag_8021q.c
+++ b/net/dsa/tag_8021q.c
@@ -286,7 +286,8 @@ int dsa_switch_tag_8021q_vlan_del(struct dsa_switch *ds,
  * be used for VLAN-unaware bridging.
  */
 int dsa_tag_8021q_bridge_join(struct dsa_switch *ds, int port,
-			      struct dsa_bridge bridge)
+			      struct dsa_bridge bridge, bool *tx_fwd_offload,
+			      struct netlink_ext_ack *extack)
 {
 	struct dsa_port *dp = dsa_to_port(ds, port);
 	u16 standalone_vid, bridge_vid;
@@ -304,6 +305,8 @@ int dsa_tag_8021q_bridge_join(struct dsa_switch *ds, int port,
 
 	dsa_port_tag_8021q_vlan_del(dp, standalone_vid, false);
 
+	*tx_fwd_offload = true;
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(dsa_tag_8021q_bridge_join);
@@ -468,8 +471,8 @@ struct sk_buff *dsa_8021q_xmit(struct sk_buff *skb, struct net_device *netdev,
 }
 EXPORT_SYMBOL_GPL(dsa_8021q_xmit);
 
-struct net_device *dsa_tag_8021q_find_port_by_vbid(struct net_device *conduit,
-						   int vbid)
+static struct net_device *
+dsa_tag_8021q_find_port_by_vbid(struct net_device *conduit, int vbid)
 {
 	struct dsa_port *cpu_dp = conduit->dsa_ptr;
 	struct dsa_switch_tree *dst = cpu_dp->dst;
@@ -495,30 +498,91 @@ struct net_device *dsa_tag_8021q_find_port_by_vbid(struct net_device *conduit,
 
 	return NULL;
 }
-EXPORT_SYMBOL_GPL(dsa_tag_8021q_find_port_by_vbid);
 
+struct net_device *dsa_tag_8021q_find_user(struct net_device *conduit,
+					   int source_port, int switch_id,
+					   int vid, int vbid)
+{
+	/* Always prefer precise source port information, if available */
+	if (source_port != -1 && switch_id != -1)
+		return dsa_conduit_find_user(conduit, switch_id, source_port);
+	else if (vbid >= 1)
+		return dsa_tag_8021q_find_port_by_vbid(conduit, vbid);
+
+	return dsa_find_designated_bridge_port_by_vid(conduit, vid);
+}
+EXPORT_SYMBOL_GPL(dsa_tag_8021q_find_user);
+
+/**
+ * dsa_8021q_rcv - Decode source information from tag_8021q header
+ * @skb: RX socket buffer
+ * @source_port: pointer to storage for precise source port information.
+ *	If this is known already from outside tag_8021q, the pre-initialized
+ *	value is preserved. If not known, pass -1.
+ * @switch_id: similar to source_port.
+ * @vbid: pointer to storage for imprecise bridge ID. Must be pre-initialized
+ *	with -1. If a positive value is returned, the source_port and switch_id
+ *	are invalid.
+ * @vid: pointer to storage for original VID, in case tag_8021q decoding failed.
+ *
+ * If the packet has a tag_8021q header, decode it and set @source_port,
+ * @switch_id and @vbid, and strip the header. Otherwise set @vid and keep the
+ * header in the hwaccel area of the packet.
+ */
 void dsa_8021q_rcv(struct sk_buff *skb, int *source_port, int *switch_id,
-		   int *vbid)
+		   int *vbid, int *vid)
 {
-	u16 vid, tci;
+	int tmp_source_port, tmp_switch_id, tmp_vbid;
+	__be16 vlan_proto;
+	u16 tmp_vid, tci;
 
 	if (skb_vlan_tag_present(skb)) {
+		vlan_proto = skb->vlan_proto;
 		tci = skb_vlan_tag_get(skb);
 		__vlan_hwaccel_clear_tag(skb);
 	} else {
+		struct vlan_ethhdr *hdr = vlan_eth_hdr(skb);
+
+		vlan_proto = hdr->h_vlan_proto;
 		skb_push_rcsum(skb, ETH_HLEN);
 		__skb_vlan_pop(skb, &tci);
 		skb_pull_rcsum(skb, ETH_HLEN);
 	}
 
-	vid = tci & VLAN_VID_MASK;
+	tmp_vid = tci & VLAN_VID_MASK;
+	if (!vid_is_dsa_8021q(tmp_vid)) {
+		/* Not a tag_8021q frame, so return the VID to the
+		 * caller for further processing, and put the tag back
+		 */
+		if (vid)
+			*vid = tmp_vid;
+
+		__vlan_hwaccel_put_tag(skb, vlan_proto, tci);
+
+		return;
+	}
 
-	*source_port = dsa_8021q_rx_source_port(vid);
-	*switch_id = dsa_8021q_rx_switch_id(vid);
+	tmp_source_port = dsa_8021q_rx_source_port(tmp_vid);
+	tmp_switch_id = dsa_8021q_rx_switch_id(tmp_vid);
+	tmp_vbid = dsa_tag_8021q_rx_vbid(tmp_vid);
+
+	/* Precise source port information is unknown when receiving from a
+	 * VLAN-unaware bridging domain, and tmp_source_port and tmp_switch_id
+	 * are zeroes in this case.
+	 *
+	 * Preserve the source information from hardware-specific mechanisms,
+	 * if available. This allows us to not overwrite a valid source port
+	 * and switch ID with less precise values.
+	 */
+	if (tmp_vbid == 0 && *source_port == -1)
+		*source_port = tmp_source_port;
+	if (tmp_vbid == 0 && *switch_id == -1)
+		*switch_id = tmp_switch_id;
 
 	if (vbid)
-		*vbid = dsa_tag_8021q_rx_vbid(vid);
+		*vbid = tmp_vbid;
 
 	skb->priority = (tci & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT;
+	return;
 }
 EXPORT_SYMBOL_GPL(dsa_8021q_rcv);
diff --git a/net/dsa/tag_8021q.h b/net/dsa/tag_8021q.h
index 41f7167ac520..27b8906f99ec 100644
--- a/net/dsa/tag_8021q.h
+++ b/net/dsa/tag_8021q.h
@@ -14,10 +14,11 @@ struct sk_buff *dsa_8021q_xmit(struct sk_buff *skb, struct net_device *netdev,
 			       u16 tpid, u16 tci);
 
 void dsa_8021q_rcv(struct sk_buff *skb, int *source_port, int *switch_id,
-		   int *vbid);
+		   int *vbid, int *vid);
 
-struct net_device *dsa_tag_8021q_find_port_by_vbid(struct net_device *conduit,
-						   int vbid);
+struct net_device *dsa_tag_8021q_find_user(struct net_device *conduit,
+					   int source_port, int switch_id,
+					   int vid, int vbid);
 
 int dsa_switch_tag_8021q_vlan_add(struct dsa_switch *ds,
 				  struct dsa_notifier_tag_8021q_vlan_info *info);
diff --git a/net/dsa/tag_ocelot_8021q.c b/net/dsa/tag_ocelot_8021q.c
index b059381310fe..8e8b1bef6af6 100644
--- a/net/dsa/tag_ocelot_8021q.c
+++ b/net/dsa/tag_ocelot_8021q.c
@@ -81,7 +81,7 @@ static struct sk_buff *ocelot_rcv(struct sk_buff *skb,
 {
 	int src_port, switch_id;
 
-	dsa_8021q_rcv(skb, &src_port, &switch_id, NULL);
+	dsa_8021q_rcv(skb, &src_port, &switch_id, NULL, NULL);
 
 	skb->dev = dsa_conduit_find_user(netdev, switch_id, src_port);
 	if (!skb->dev)
diff --git a/net/dsa/tag_sja1105.c b/net/dsa/tag_sja1105.c
index 1aba1d05c27a..3e902af7eea6 100644
--- a/net/dsa/tag_sja1105.c
+++ b/net/dsa/tag_sja1105.c
@@ -472,37 +472,14 @@ static bool sja1110_skb_has_inband_control_extension(const struct sk_buff *skb)
 	return ntohs(eth_hdr(skb)->h_proto) == ETH_P_SJA1110;
 }
 
-/* If the VLAN in the packet is a tag_8021q one, set @source_port and
- * @switch_id and strip the header. Otherwise set @vid and keep it in the
- * packet.
- */
-static void sja1105_vlan_rcv(struct sk_buff *skb, int *source_port,
-			     int *switch_id, int *vbid, u16 *vid)
-{
-	struct vlan_ethhdr *hdr = vlan_eth_hdr(skb);
-	u16 vlan_tci;
-
-	if (skb_vlan_tag_present(skb))
-		vlan_tci = skb_vlan_tag_get(skb);
-	else
-		vlan_tci = ntohs(hdr->h_vlan_TCI);
-
-	if (vid_is_dsa_8021q(vlan_tci & VLAN_VID_MASK))
-		return dsa_8021q_rcv(skb, source_port, switch_id, vbid);
-
-	/* Try our best with imprecise RX */
-	*vid = vlan_tci & VLAN_VID_MASK;
-}
-
 static struct sk_buff *sja1105_rcv(struct sk_buff *skb,
 				   struct net_device *netdev)
 {
-	int source_port = -1, switch_id = -1, vbid = -1;
+	int source_port = -1, switch_id = -1, vbid = -1, vid = -1;
 	struct sja1105_meta meta = {0};
 	struct ethhdr *hdr;
 	bool is_link_local;
 	bool is_meta;
-	u16 vid;
 
 	hdr = eth_hdr(skb);
 	is_link_local = sja1105_is_link_local(skb);
@@ -524,37 +501,16 @@ static struct sk_buff *sja1105_rcv(struct sk_buff *skb,
 	/* Normal data plane traffic and link-local frames are tagged with
 	 * a tag_8021q VLAN which we have to strip
 	 */
-	if (sja1105_skb_has_tag_8021q(skb)) {
-		int tmp_source_port = -1, tmp_switch_id = -1;
-
-		sja1105_vlan_rcv(skb, &tmp_source_port, &tmp_switch_id, &vbid,
-				 &vid);
-		/* Preserve the source information from the INCL_SRCPT option,
-		 * if available. This allows us to not overwrite a valid source
-		 * port and switch ID with zeroes when receiving link-local
-		 * frames from a VLAN-unaware bridged port (non-zero vbid) or a
-		 * VLAN-aware bridged port (non-zero vid). Furthermore, the
-		 * tag_8021q source port information is only of trust when the
-		 * vbid is 0 (precise port). Otherwise, tmp_source_port and
-		 * tmp_switch_id will be zeroes.
-		 */
-		if (vbid == 0 && source_port == -1)
-			source_port = tmp_source_port;
-		if (vbid == 0 && switch_id == -1)
-			switch_id = tmp_switch_id;
-	} else if (source_port == -1 && switch_id == -1) {
+	if (sja1105_skb_has_tag_8021q(skb))
+		dsa_8021q_rcv(skb, &source_port, &switch_id, &vbid, &vid);
+	else if (source_port == -1 && switch_id == -1)
 		/* Packets with no source information have no chance of
 		 * getting accepted, drop them straight away.
 		 */
 		return NULL;
-	}
 
-	if (source_port != -1 && switch_id != -1)
-		skb->dev = dsa_conduit_find_user(netdev, switch_id, source_port);
-	else if (vbid >= 1)
-		skb->dev = dsa_tag_8021q_find_port_by_vbid(netdev, vbid);
-	else
-		skb->dev = dsa_find_designated_bridge_port_by_vid(netdev, vid);
+	skb->dev = dsa_tag_8021q_find_user(netdev, source_port, switch_id,
+					   vid, vbid);
 	if (!skb->dev) {
 		netdev_warn(netdev, "Couldn't decode source port\n");
 		return NULL;
@@ -677,9 +633,8 @@ static struct sk_buff *sja1110_rcv_inband_control_extension(struct sk_buff *skb,
 static struct sk_buff *sja1110_rcv(struct sk_buff *skb,
 				   struct net_device *netdev)
 {
-	int source_port = -1, switch_id = -1, vbid = -1;
+	int source_port = -1, switch_id = -1, vbid = -1, vid = -1;
 	bool host_only = false;
-	u16 vid = 0;
 
 	if (sja1110_skb_has_inband_control_extension(skb)) {
 		skb = sja1110_rcv_inband_control_extension(skb, &source_port,
@@ -691,14 +646,11 @@ static struct sk_buff *sja1110_rcv(struct sk_buff *skb,
 
 	/* Packets with in-band control extensions might still have RX VLANs */
 	if (likely(sja1105_skb_has_tag_8021q(skb)))
-		sja1105_vlan_rcv(skb, &source_port, &switch_id, &vbid, &vid);
-
-	if (vbid >= 1)
-		skb->dev = dsa_tag_8021q_find_port_by_vbid(netdev, vbid);
-	else if (source_port == -1 || switch_id == -1)
-		skb->dev = dsa_find_designated_bridge_port_by_vid(netdev, vid);
-	else
-		skb->dev = dsa_conduit_find_user(netdev, switch_id, source_port);
+		dsa_8021q_rcv(skb, &source_port, &switch_id, &vbid, &vid);
+
+	skb->dev = dsa_tag_8021q_find_user(netdev, source_port, switch_id,
+					   vid, vbid);
+
 	if (!skb->dev) {
 		netdev_warn(netdev, "Couldn't decode source port\n");
 		return NULL;
diff --git a/net/dsa/tag_vsc73xx_8021q.c b/net/dsa/tag_vsc73xx_8021q.c
new file mode 100644
index 000000000000..af121a9aff7f
--- /dev/null
+++ b/net/dsa/tag_vsc73xx_8021q.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/* Copyright (C) 2024 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+#include <linux/dsa/8021q.h>
+
+#include "tag.h"
+#include "tag_8021q.h"
+
+#define VSC73XX_8021Q_NAME "vsc73xx-8021q"
+
+static struct sk_buff *
+vsc73xx_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct dsa_port *dp = dsa_user_to_port(netdev);
+	u16 queue_mapping = skb_get_queue_mapping(skb);
+	u16 tx_vid = dsa_tag_8021q_standalone_vid(dp);
+	u8 pcp;
+
+	if (skb->offload_fwd_mark) {
+		unsigned int bridge_num = dsa_port_bridge_num_get(dp);
+		struct net_device *br = dsa_port_bridge_dev_get(dp);
+
+		if (br_vlan_enabled(br))
+			return skb;
+
+		tx_vid = dsa_tag_8021q_bridge_vid(bridge_num);
+	}
+
+	pcp = netdev_txq_to_tc(netdev, queue_mapping);
+
+	return dsa_8021q_xmit(skb, netdev, ETH_P_8021Q,
+			      ((pcp << VLAN_PRIO_SHIFT) | tx_vid));
+}
+
+static struct sk_buff *
+vsc73xx_rcv(struct sk_buff *skb, struct net_device *netdev)
+{
+	int src_port = -1, switch_id = -1, vbid = -1, vid = -1;
+
+	dsa_8021q_rcv(skb, &src_port, &switch_id, &vbid, &vid);
+
+	skb->dev = dsa_tag_8021q_find_user(netdev, src_port, switch_id,
+					   vid, vbid);
+	if (!skb->dev) {
+		dev_warn_ratelimited(&netdev->dev,
+				     "Couldn't decode source port\n");
+		return NULL;
+	}
+
+	dsa_default_offload_fwd_mark(skb);
+
+	return skb;
+}
+
+static const struct dsa_device_ops vsc73xx_8021q_netdev_ops = {
+	.name			= VSC73XX_8021Q_NAME,
+	.proto			= DSA_TAG_PROTO_VSC73XX_8021Q,
+	.xmit			= vsc73xx_xmit,
+	.rcv			= vsc73xx_rcv,
+	.needed_headroom	= VLAN_HLEN,
+	.promisc_on_conduit	= true,
+};
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DSA tag driver for VSC73XX family of switches, using VLAN");
+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_VSC73XX_8021Q, VSC73XX_8021Q_NAME);
+
+module_dsa_tag_driver(vsc73xx_8021q_netdev_ops);
diff --git a/net/dsa/user.c b/net/dsa/user.c
index 867c5fe9a4da..f5adfa1d978a 100644
--- a/net/dsa/user.c
+++ b/net/dsa/user.c
@@ -355,60 +355,82 @@ static int dsa_user_get_iflink(const struct net_device *dev)
 	return READ_ONCE(dsa_user_to_conduit(dev)->ifindex);
 }
 
-static int dsa_user_open(struct net_device *dev)
+int dsa_user_host_uc_install(struct net_device *dev, const u8 *addr)
 {
 	struct net_device *conduit = dsa_user_to_conduit(dev);
 	struct dsa_port *dp = dsa_user_to_port(dev);
 	struct dsa_switch *ds = dp->ds;
 	int err;
 
-	err = dev_open(conduit, NULL);
-	if (err < 0) {
-		netdev_err(dev, "failed to open conduit %s\n", conduit->name);
-		goto out;
-	}
-
 	if (dsa_switch_supports_uc_filtering(ds)) {
-		err = dsa_port_standalone_host_fdb_add(dp, dev->dev_addr, 0);
+		err = dsa_port_standalone_host_fdb_add(dp, addr, 0);
 		if (err)
 			goto out;
 	}
 
-	if (!ether_addr_equal(dev->dev_addr, conduit->dev_addr)) {
-		err = dev_uc_add(conduit, dev->dev_addr);
+	if (!ether_addr_equal(addr, conduit->dev_addr)) {
+		err = dev_uc_add(conduit, addr);
 		if (err < 0)
 			goto del_host_addr;
 	}
 
-	err = dsa_port_enable_rt(dp, dev->phydev);
-	if (err)
-		goto del_unicast;
-
 	return 0;
 
-del_unicast:
-	if (!ether_addr_equal(dev->dev_addr, conduit->dev_addr))
-		dev_uc_del(conduit, dev->dev_addr);
 del_host_addr:
 	if (dsa_switch_supports_uc_filtering(ds))
-		dsa_port_standalone_host_fdb_del(dp, dev->dev_addr, 0);
+		dsa_port_standalone_host_fdb_del(dp, addr, 0);
 out:
 	return err;
 }
 
-static int dsa_user_close(struct net_device *dev)
+void dsa_user_host_uc_uninstall(struct net_device *dev)
 {
 	struct net_device *conduit = dsa_user_to_conduit(dev);
 	struct dsa_port *dp = dsa_user_to_port(dev);
 	struct dsa_switch *ds = dp->ds;
 
-	dsa_port_disable_rt(dp);
-
 	if (!ether_addr_equal(dev->dev_addr, conduit->dev_addr))
 		dev_uc_del(conduit, dev->dev_addr);
 
 	if (dsa_switch_supports_uc_filtering(ds))
 		dsa_port_standalone_host_fdb_del(dp, dev->dev_addr, 0);
+}
+
+static int dsa_user_open(struct net_device *dev)
+{
+	struct net_device *conduit = dsa_user_to_conduit(dev);
+	struct dsa_port *dp = dsa_user_to_port(dev);
+	int err;
+
+	err = dev_open(conduit, NULL);
+	if (err < 0) {
+		netdev_err(dev, "failed to open conduit %s\n", conduit->name);
+		goto out;
+	}
+
+	err = dsa_user_host_uc_install(dev, dev->dev_addr);
+	if (err)
+		goto out;
+
+	err = dsa_port_enable_rt(dp, dev->phydev);
+	if (err)
+		goto out_del_host_uc;
+
+	return 0;
+
+out_del_host_uc:
+	dsa_user_host_uc_uninstall(dev);
+out:
+	return err;
+}
+
+static int dsa_user_close(struct net_device *dev)
+{
+	struct dsa_port *dp = dsa_user_to_port(dev);
+
+	dsa_port_disable_rt(dp);
+
+	dsa_user_host_uc_uninstall(dev);
 
 	return 0;
 }
@@ -448,7 +470,6 @@ static void dsa_user_set_rx_mode(struct net_device *dev)
 
 static int dsa_user_set_mac_address(struct net_device *dev, void *a)
 {
-	struct net_device *conduit = dsa_user_to_conduit(dev);
 	struct dsa_port *dp = dsa_user_to_port(dev);
 	struct dsa_switch *ds = dp->ds;
 	struct sockaddr *addr = a;
@@ -470,34 +491,16 @@ static int dsa_user_set_mac_address(struct net_device *dev, void *a)
 	if (!(dev->flags & IFF_UP))
 		goto out_change_dev_addr;
 
-	if (dsa_switch_supports_uc_filtering(ds)) {
-		err = dsa_port_standalone_host_fdb_add(dp, addr->sa_data, 0);
-		if (err)
-			return err;
-	}
-
-	if (!ether_addr_equal(addr->sa_data, conduit->dev_addr)) {
-		err = dev_uc_add(conduit, addr->sa_data);
-		if (err < 0)
-			goto del_unicast;
-	}
+	err = dsa_user_host_uc_install(dev, addr->sa_data);
+	if (err)
+		return err;
 
-	if (!ether_addr_equal(dev->dev_addr, conduit->dev_addr))
-		dev_uc_del(conduit, dev->dev_addr);
-
-	if (dsa_switch_supports_uc_filtering(ds))
-		dsa_port_standalone_host_fdb_del(dp, dev->dev_addr, 0);
+	dsa_user_host_uc_uninstall(dev);
 
 out_change_dev_addr:
 	eth_hw_addr_set(dev, addr->sa_data);
 
 	return 0;
-
-del_unicast:
-	if (dsa_switch_supports_uc_filtering(ds))
-		dsa_port_standalone_host_fdb_del(dp, addr->sa_data, 0);
-
-	return err;
 }
 
 struct dsa_user_dump_ctx {
@@ -1726,7 +1729,7 @@ static int dsa_user_set_rxnfc(struct net_device *dev,
 }
 
 static int dsa_user_get_ts_info(struct net_device *dev,
-				struct ethtool_ts_info *ts)
+				struct kernel_ethtool_ts_info *ts)
 {
 	struct dsa_user_priv *p = netdev_priv(dev);
 	struct dsa_switch *ds = p->dp->ds;
@@ -2879,12 +2882,6 @@ int dsa_user_change_conduit(struct net_device *dev, struct net_device *conduit,
 			    ERR_PTR(err));
 	}
 
-	/* If the port doesn't have its own MAC address and relies on the DSA
-	 * conduit's one, inherit it again from the new DSA conduit.
-	 */
-	if (is_zero_ether_addr(dp->mac))
-		eth_hw_addr_inherit(dev, conduit);
-
 	return 0;
 
 out_revert_conduit_link:
diff --git a/net/dsa/user.h b/net/dsa/user.h
index 996069130bea..016884bead3c 100644
--- a/net/dsa/user.h
+++ b/net/dsa/user.h
@@ -42,6 +42,8 @@ int dsa_user_suspend(struct net_device *user_dev);
 int dsa_user_resume(struct net_device *user_dev);
 int dsa_user_register_notifier(void);
 void dsa_user_unregister_notifier(void);
+int dsa_user_host_uc_install(struct net_device *dev, const u8 *addr);
+void dsa_user_host_uc_uninstall(struct net_device *dev);
 void dsa_user_sync_ha(struct net_device *dev);
 void dsa_user_unsync_ha(struct net_device *dev);
 void dsa_user_setup_tagger(struct net_device *user);