Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

1 files changed, 149 insertions, 15 deletions

diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
index 3243c83ef3e3..b5f0adae8293 100644
--- a/kernel/bpf/helpers.c
+++ b/kernel/bpf/helpers.c
@@ -2498,7 +2498,7 @@ __bpf_kfunc struct task_struct *bpf_task_from_pid(s32 pid)
 
 /**
  * bpf_dynptr_slice() - Obtain a read-only pointer to the dynptr data.
- * @ptr: The dynptr whose data slice to retrieve
+ * @p: The dynptr whose data slice to retrieve
  * @offset: Offset into the dynptr
  * @buffer__opt: User-provided buffer to copy contents into.  May be NULL
  * @buffer__szk: Size (in bytes) of the buffer if present. This is the
@@ -2524,9 +2524,10 @@ __bpf_kfunc struct task_struct *bpf_task_from_pid(s32 pid)
  * provided buffer, with its contents containing the data, if unable to obtain
  * direct pointer)
  */
-__bpf_kfunc void *bpf_dynptr_slice(const struct bpf_dynptr_kern *ptr, u32 offset,
+__bpf_kfunc void *bpf_dynptr_slice(const struct bpf_dynptr *p, u32 offset,
 				   void *buffer__opt, u32 buffer__szk)
 {
+	const struct bpf_dynptr_kern *ptr = (struct bpf_dynptr_kern *)p;
 	enum bpf_dynptr_type type;
 	u32 len = buffer__szk;
 	int err;
@@ -2568,7 +2569,7 @@ __bpf_kfunc void *bpf_dynptr_slice(const struct bpf_dynptr_kern *ptr, u32 offset
 
 /**
  * bpf_dynptr_slice_rdwr() - Obtain a writable pointer to the dynptr data.
- * @ptr: The dynptr whose data slice to retrieve
+ * @p: The dynptr whose data slice to retrieve
  * @offset: Offset into the dynptr
  * @buffer__opt: User-provided buffer to copy contents into. May be NULL
  * @buffer__szk: Size (in bytes) of the buffer if present. This is the
@@ -2608,9 +2609,11 @@ __bpf_kfunc void *bpf_dynptr_slice(const struct bpf_dynptr_kern *ptr, u32 offset
  * provided buffer, with its contents containing the data, if unable to obtain
  * direct pointer)
  */
-__bpf_kfunc void *bpf_dynptr_slice_rdwr(const struct bpf_dynptr_kern *ptr, u32 offset,
+__bpf_kfunc void *bpf_dynptr_slice_rdwr(const struct bpf_dynptr *p, u32 offset,
 					void *buffer__opt, u32 buffer__szk)
 {
+	const struct bpf_dynptr_kern *ptr = (struct bpf_dynptr_kern *)p;
+
 	if (!ptr->data || __bpf_dynptr_is_rdonly(ptr))
 		return NULL;
 
@@ -2636,11 +2639,12 @@ __bpf_kfunc void *bpf_dynptr_slice_rdwr(const struct bpf_dynptr_kern *ptr, u32 o
 	 * will be copied out into the buffer and the user will need to call
 	 * bpf_dynptr_write() to commit changes.
 	 */
-	return bpf_dynptr_slice(ptr, offset, buffer__opt, buffer__szk);
+	return bpf_dynptr_slice(p, offset, buffer__opt, buffer__szk);
 }
 
-__bpf_kfunc int bpf_dynptr_adjust(struct bpf_dynptr_kern *ptr, u32 start, u32 end)
+__bpf_kfunc int bpf_dynptr_adjust(const struct bpf_dynptr *p, u32 start, u32 end)
 {
+	struct bpf_dynptr_kern *ptr = (struct bpf_dynptr_kern *)p;
 	u32 size;
 
 	if (!ptr->data || start > end)
@@ -2657,36 +2661,45 @@ __bpf_kfunc int bpf_dynptr_adjust(struct bpf_dynptr_kern *ptr, u32 start, u32 en
 	return 0;
 }
 
-__bpf_kfunc bool bpf_dynptr_is_null(struct bpf_dynptr_kern *ptr)
+__bpf_kfunc bool bpf_dynptr_is_null(const struct bpf_dynptr *p)
 {
+	struct bpf_dynptr_kern *ptr = (struct bpf_dynptr_kern *)p;
+
 	return !ptr->data;
 }
 
-__bpf_kfunc bool bpf_dynptr_is_rdonly(struct bpf_dynptr_kern *ptr)
+__bpf_kfunc bool bpf_dynptr_is_rdonly(const struct bpf_dynptr *p)
 {
+	struct bpf_dynptr_kern *ptr = (struct bpf_dynptr_kern *)p;
+
 	if (!ptr->data)
 		return false;
 
 	return __bpf_dynptr_is_rdonly(ptr);
 }
 
-__bpf_kfunc __u32 bpf_dynptr_size(const struct bpf_dynptr_kern *ptr)
+__bpf_kfunc __u32 bpf_dynptr_size(const struct bpf_dynptr *p)
 {
+	struct bpf_dynptr_kern *ptr = (struct bpf_dynptr_kern *)p;
+
 	if (!ptr->data)
 		return -EINVAL;
 
 	return __bpf_dynptr_size(ptr);
 }
 
-__bpf_kfunc int bpf_dynptr_clone(struct bpf_dynptr_kern *ptr,
-				 struct bpf_dynptr_kern *clone__uninit)
+__bpf_kfunc int bpf_dynptr_clone(const struct bpf_dynptr *p,
+				 struct bpf_dynptr *clone__uninit)
 {
+	struct bpf_dynptr_kern *clone = (struct bpf_dynptr_kern *)clone__uninit;
+	struct bpf_dynptr_kern *ptr = (struct bpf_dynptr_kern *)p;
+
 	if (!ptr->data) {
-		bpf_dynptr_set_null(clone__uninit);
+		bpf_dynptr_set_null(clone);
 		return -EINVAL;
 	}
 
-	*clone__uninit = *ptr;
+	*clone = *ptr;
 
 	return 0;
 }
@@ -2786,7 +2799,7 @@ __bpf_kfunc int bpf_wq_start(struct bpf_wq *wq, unsigned int flags)
 }
 
 __bpf_kfunc int bpf_wq_set_callback_impl(struct bpf_wq *wq,
-					 int (callback_fn)(void *map, int *key, struct bpf_wq *wq),
+					 int (callback_fn)(void *map, int *key, void *value),
 					 unsigned int flags,
 					 void *aux__ign)
 {
@@ -2809,6 +2822,122 @@ __bpf_kfunc void bpf_preempt_enable(void)
 	preempt_enable();
 }
 
+struct bpf_iter_bits {
+	__u64 __opaque[2];
+} __aligned(8);
+
+struct bpf_iter_bits_kern {
+	union {
+		unsigned long *bits;
+		unsigned long bits_copy;
+	};
+	u32 nr_bits;
+	int bit;
+} __aligned(8);
+
+/**
+ * bpf_iter_bits_new() - Initialize a new bits iterator for a given memory area
+ * @it: The new bpf_iter_bits to be created
+ * @unsafe_ptr__ign: A pointer pointing to a memory area to be iterated over
+ * @nr_words: The size of the specified memory area, measured in 8-byte units.
+ * Due to the limitation of memalloc, it can't be greater than 512.
+ *
+ * This function initializes a new bpf_iter_bits structure for iterating over
+ * a memory area which is specified by the @unsafe_ptr__ign and @nr_words. It
+ * copies the data of the memory area to the newly created bpf_iter_bits @it for
+ * subsequent iteration operations.
+ *
+ * On success, 0 is returned. On failure, ERR is returned.
+ */
+__bpf_kfunc int
+bpf_iter_bits_new(struct bpf_iter_bits *it, const u64 *unsafe_ptr__ign, u32 nr_words)
+{
+	struct bpf_iter_bits_kern *kit = (void *)it;
+	u32 nr_bytes = nr_words * sizeof(u64);
+	u32 nr_bits = BYTES_TO_BITS(nr_bytes);
+	int err;
+
+	BUILD_BUG_ON(sizeof(struct bpf_iter_bits_kern) != sizeof(struct bpf_iter_bits));
+	BUILD_BUG_ON(__alignof__(struct bpf_iter_bits_kern) !=
+		     __alignof__(struct bpf_iter_bits));
+
+	kit->nr_bits = 0;
+	kit->bits_copy = 0;
+	kit->bit = -1;
+
+	if (!unsafe_ptr__ign || !nr_words)
+		return -EINVAL;
+
+	/* Optimization for u64 mask */
+	if (nr_bits == 64) {
+		err = bpf_probe_read_kernel_common(&kit->bits_copy, nr_bytes, unsafe_ptr__ign);
+		if (err)
+			return -EFAULT;
+
+		kit->nr_bits = nr_bits;
+		return 0;
+	}
+
+	/* Fallback to memalloc */
+	kit->bits = bpf_mem_alloc(&bpf_global_ma, nr_bytes);
+	if (!kit->bits)
+		return -ENOMEM;
+
+	err = bpf_probe_read_kernel_common(kit->bits, nr_bytes, unsafe_ptr__ign);
+	if (err) {
+		bpf_mem_free(&bpf_global_ma, kit->bits);
+		return err;
+	}
+
+	kit->nr_bits = nr_bits;
+	return 0;
+}
+
+/**
+ * bpf_iter_bits_next() - Get the next bit in a bpf_iter_bits
+ * @it: The bpf_iter_bits to be checked
+ *
+ * This function returns a pointer to a number representing the value of the
+ * next bit in the bits.
+ *
+ * If there are no further bits available, it returns NULL.
+ */
+__bpf_kfunc int *bpf_iter_bits_next(struct bpf_iter_bits *it)
+{
+	struct bpf_iter_bits_kern *kit = (void *)it;
+	u32 nr_bits = kit->nr_bits;
+	const unsigned long *bits;
+	int bit;
+
+	if (nr_bits == 0)
+		return NULL;
+
+	bits = nr_bits == 64 ? &kit->bits_copy : kit->bits;
+	bit = find_next_bit(bits, nr_bits, kit->bit + 1);
+	if (bit >= nr_bits) {
+		kit->nr_bits = 0;
+		return NULL;
+	}
+
+	kit->bit = bit;
+	return &kit->bit;
+}
+
+/**
+ * bpf_iter_bits_destroy() - Destroy a bpf_iter_bits
+ * @it: The bpf_iter_bits to be destroyed
+ *
+ * Destroy the resource associated with the bpf_iter_bits.
+ */
+__bpf_kfunc void bpf_iter_bits_destroy(struct bpf_iter_bits *it)
+{
+	struct bpf_iter_bits_kern *kit = (void *)it;
+
+	if (kit->nr_bits <= 64)
+		return;
+	bpf_mem_free(&bpf_global_ma, kit->bits);
+}
+
 __bpf_kfunc_end_defs();
 
 BTF_KFUNCS_START(generic_btf_ids)
@@ -2891,6 +3020,9 @@ BTF_ID_FLAGS(func, bpf_wq_set_callback_impl)
 BTF_ID_FLAGS(func, bpf_wq_start)
 BTF_ID_FLAGS(func, bpf_preempt_disable)
 BTF_ID_FLAGS(func, bpf_preempt_enable)
+BTF_ID_FLAGS(func, bpf_iter_bits_new, KF_ITER_NEW)
+BTF_ID_FLAGS(func, bpf_iter_bits_next, KF_ITER_NEXT | KF_RET_NULL)
+BTF_ID_FLAGS(func, bpf_iter_bits_destroy, KF_ITER_DESTROY)
 BTF_KFUNCS_END(common_btf_ids)
 
 static const struct btf_kfunc_id_set common_kfunc_set = {
@@ -2932,7 +3064,9 @@ late_initcall(kfunc_init);
  */
 const void *__bpf_dynptr_data(const struct bpf_dynptr_kern *ptr, u32 len)
 {
-	return bpf_dynptr_slice(ptr, 0, NULL, len);
+	const struct bpf_dynptr *p = (struct bpf_dynptr *)ptr;
+
+	return bpf_dynptr_slice(p, 0, NULL, len);
 }
 
 /* Get a pointer to dynptr data up to len bytes for read write access. If