Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

1 files changed, 28 insertions, 29 deletions

diff --git a/kernel/bpf/devmap.c b/kernel/bpf/devmap.c
index 7f3b34452243..9e0e3b0a18e4 100644
--- a/kernel/bpf/devmap.c
+++ b/kernel/bpf/devmap.c
@@ -83,7 +83,6 @@ struct bpf_dtab {
 	u32 n_buckets;
 };
 
-static DEFINE_PER_CPU(struct list_head, dev_flush_list);
 static DEFINE_SPINLOCK(dev_map_lock);
 static LIST_HEAD(dev_map_list);
 
@@ -107,7 +106,7 @@ static inline struct hlist_head *dev_map_index_hash(struct bpf_dtab *dtab,
 	return &dtab->dev_index_head[idx & (dtab->n_buckets - 1)];
 }
 
-static int dev_map_init_map(struct bpf_dtab *dtab, union bpf_attr *attr)
+static int dev_map_alloc_check(union bpf_attr *attr)
 {
 	u32 valsize = attr->value_size;
 
@@ -121,23 +120,28 @@ static int dev_map_init_map(struct bpf_dtab *dtab, union bpf_attr *attr)
 	    attr->map_flags & ~DEV_CREATE_FLAG_MASK)
 		return -EINVAL;
 
+	if (attr->map_type == BPF_MAP_TYPE_DEVMAP_HASH) {
+		/* Hash table size must be power of 2; roundup_pow_of_two()
+		 * can overflow into UB on 32-bit arches
+		 */
+		if (attr->max_entries > 1UL << 31)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int dev_map_init_map(struct bpf_dtab *dtab, union bpf_attr *attr)
+{
 	/* Lookup returns a pointer straight to dev->ifindex, so make sure the
 	 * verifier prevents writes from the BPF side
 	 */
 	attr->map_flags |= BPF_F_RDONLY_PROG;
-
-
 	bpf_map_init_from_attr(&dtab->map, attr);
 
 	if (attr->map_type == BPF_MAP_TYPE_DEVMAP_HASH) {
-		/* hash table size must be power of 2; roundup_pow_of_two() can
-		 * overflow into UB on 32-bit arches, so check that first
-		 */
-		if (dtab->map.max_entries > 1UL << 31)
-			return -EINVAL;
-
+		/* Hash table size must be power of 2 */
 		dtab->n_buckets = roundup_pow_of_two(dtab->map.max_entries);
-
 		dtab->dev_index_head = dev_map_create_hash(dtab->n_buckets,
 							   dtab->map.numa_node);
 		if (!dtab->dev_index_head)
@@ -196,7 +200,14 @@ static void dev_map_free(struct bpf_map *map)
 	list_del_rcu(&dtab->list);
 	spin_unlock(&dev_map_lock);
 
-	bpf_clear_redirect_map(map);
+	/* bpf_redirect_info->map is assigned in __bpf_xdp_redirect_map()
+	 * during NAPI callback and cleared after the XDP redirect. There is no
+	 * explicit RCU read section which protects bpf_redirect_info->map but
+	 * local_bh_disable() also marks the beginning an RCU section. This
+	 * makes the complete softirq callback RCU protected. Thus after
+	 * following synchronize_rcu() there no bpf_redirect_info->map == map
+	 * assignment.
+	 */
 	synchronize_rcu();
 
 	/* Make sure prior __dev_map_entry_free() have completed. */
@@ -406,9 +417,8 @@ out:
  * driver before returning from its napi->poll() routine. See the comment above
  * xdp_do_flush() in filter.c.
  */
-void __dev_flush(void)
+void __dev_flush(struct list_head *flush_list)
 {
-	struct list_head *flush_list = this_cpu_ptr(&dev_flush_list);
 	struct xdp_dev_bulk_queue *bq, *tmp;
 
 	list_for_each_entry_safe(bq, tmp, flush_list, flush_node) {
@@ -419,16 +429,6 @@ void __dev_flush(void)
 	}
 }
 
-#ifdef CONFIG_DEBUG_NET
-bool dev_check_flush(void)
-{
-	if (list_empty(this_cpu_ptr(&dev_flush_list)))
-		return false;
-	__dev_flush();
-	return true;
-}
-#endif
-
 /* Elements are kept alive by RCU; either by rcu_read_lock() (from syscall) or
  * by local_bh_disable() (from XDP calls inside NAPI). The
  * rcu_read_lock_bh_held() below makes lockdep accept both.
@@ -453,7 +453,6 @@ static void *__dev_map_lookup_elem(struct bpf_map *map, u32 key)
 static void bq_enqueue(struct net_device *dev, struct xdp_frame *xdpf,
 		       struct net_device *dev_rx, struct bpf_prog *xdp_prog)
 {
-	struct list_head *flush_list = this_cpu_ptr(&dev_flush_list);
 	struct xdp_dev_bulk_queue *bq = this_cpu_ptr(dev->xdp_bulkq);
 
 	if (unlikely(bq->count == DEV_MAP_BULK_SIZE))
@@ -467,6 +466,8 @@ static void bq_enqueue(struct net_device *dev, struct xdp_frame *xdpf,
 	 * are only ever modified together.
 	 */
 	if (!bq->dev_rx) {
+		struct list_head *flush_list = bpf_net_ctx_get_dev_flush_list();
+
 		bq->dev_rx = dev_rx;
 		bq->xdp_prog = xdp_prog;
 		list_add(&bq->flush_node, flush_list);
@@ -1040,6 +1041,7 @@ static u64 dev_map_mem_usage(const struct bpf_map *map)
 BTF_ID_LIST_SINGLE(dev_map_btf_ids, struct, bpf_dtab)
 const struct bpf_map_ops dev_map_ops = {
 	.map_meta_equal = bpf_map_meta_equal,
+	.map_alloc_check = dev_map_alloc_check,
 	.map_alloc = dev_map_alloc,
 	.map_free = dev_map_free,
 	.map_get_next_key = dev_map_get_next_key,
@@ -1054,6 +1056,7 @@ const struct bpf_map_ops dev_map_ops = {
 
 const struct bpf_map_ops dev_map_hash_ops = {
 	.map_meta_equal = bpf_map_meta_equal,
+	.map_alloc_check = dev_map_alloc_check,
 	.map_alloc = dev_map_alloc,
 	.map_free = dev_map_free,
 	.map_get_next_key = dev_map_hash_get_next_key,
@@ -1153,15 +1156,11 @@ static struct notifier_block dev_map_notifier = {
 
 static int __init dev_map_init(void)
 {
-	int cpu;
-
 	/* Assure tracepoint shadow struct _bpf_dtab_netdev is in sync */
 	BUILD_BUG_ON(offsetof(struct bpf_dtab_netdev, dev) !=
 		     offsetof(struct _bpf_dtab_netdev, dev));
 	register_netdevice_notifier(&dev_map_notifier);
 
-	for_each_possible_cpu(cpu)
-		INIT_LIST_HEAD(&per_cpu(dev_flush_list, cpu));
 	return 0;
 }