Merge tag 'for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 - new AXP20X USB Power driver
 - new Qualcomm SMBB driver
 - new TPS65217 Charger driver
 - BQ24257: add BQ24250/BQ24251 support
 - overhaul bq27x00 battery driver, rename to bq27xxx
 - misc fixes and cleanups

* tag 'for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (54 commits)
  power: bq27xxx_battery: Remove unneeded dependency in Kconfig
  power: bq27xxx_battery: move irq handler to i2c section
  power: bq27xxx_battery: fix platform probe
  twl4030_charger: add missing iio dependency
  power_supply: charger-manager: add missing of_node_put
  Documentation: power: bq24257: Document exported sysfs entries
  power: bq24257: Add various device-specific sysfs properties
  power: bq24257: Allow input current limit sysfs access
  power: bq24257: Add input DPM voltage threshold setting support
  power: bq24257: Add over voltage protection setting support
  power: bq24257: Add SW-based approach for Power Good determination
  power: bq24257: Allow manual setting of input current limit
  power: bq24257: Add bit definition for temp sense enable
  power: bq24257: Add basic support for bq24250/bq24251
  dt: power: bq24257-charger: Cover additional devices
  power: bq24257: Simplify bq24257_power_supply_init()
  power: bq24257: Use managed power supply register
  power: bq24257: Streamline input current limit setup
  power: bq24257: Remove IRQ config through stat-gpios
  power: bq27xxx_battery: fix signedness bug in bq27xxx_battery_read_health()
  ...

4 files changed, 59 insertions, 23 deletions

diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index cc8ad1e1a307..b24c771cebd5 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -11,6 +11,8 @@
 #ifndef __LINUX_MFD_AXP20X_H
 #define __LINUX_MFD_AXP20X_H
 
+#include <linux/regmap.h>
+
 enum {
 	AXP152_ID = 0,
 	AXP202_ID,
@@ -438,4 +440,26 @@ struct axp288_extcon_pdata {
 	struct gpio_desc *gpio_mux_cntl;
 };
 
+/* generic helper function for reading 9-16 bit wide regs */
+static inline int axp20x_read_variable_width(struct regmap *regmap,
+	unsigned int reg, unsigned int width)
+{
+	unsigned int reg_val, result;
+	int err;
+
+	err = regmap_read(regmap, reg, &reg_val);
+	if (err)
+		return err;
+
+	result = reg_val << (width - 8);
+
+	err = regmap_read(regmap, reg + 1, &reg_val);
+	if (err)
+		return err;
+
+	result |= reg_val;
+
+	return result;
+}
+
 #endif /* __LINUX_MFD_AXP20X_H */
diff --git a/include/linux/power/bq27x00_battery.h b/include/linux/power/bq27x00_battery.h
deleted file mode 100644
index a857f719bf40..000000000000
--- a/include/linux/power/bq27x00_battery.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __LINUX_BQ27X00_BATTERY_H__
-#define __LINUX_BQ27X00_BATTERY_H__
-
-/**
- * struct bq27000_plaform_data - Platform data for bq27000 devices
- * @name: Name of the battery. If NULL the driver will fallback to "bq27000".
- * @read: HDQ read callback.
- *	This function should provide access to the HDQ bus the battery is
- *	connected to.
- *	The first parameter is a pointer to the battery device, the second the
- *	register to be read. The return value should either be the content of
- *	the passed register or an error value.
- */
-struct bq27000_platform_data {
-	const char *name;
-	int (*read)(struct device *dev, unsigned int);
-};
-
-#endif
diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
new file mode 100644
index 000000000000..45f6a7b5b3cb
--- /dev/null
+++ b/include/linux/power/bq27xxx_battery.h
@@ -0,0 +1,31 @@
+#ifndef __LINUX_BQ27X00_BATTERY_H__
+#define __LINUX_BQ27X00_BATTERY_H__
+
+/**
+ * struct bq27xxx_plaform_data - Platform data for bq27xxx devices
+ * @name: Name of the battery.
+ * @chip: Chip class number of this device.
+ * @read: HDQ read callback.
+ *	This function should provide access to the HDQ bus the battery is
+ *	connected to.
+ *	The first parameter is a pointer to the battery device, the second the
+ *	register to be read. The return value should either be the content of
+ *	the passed register or an error value.
+ */
+enum bq27xxx_chip {
+	BQ27000 = 1, /* bq27000, bq27200 */
+	BQ27010, /* bq27010, bq27210 */
+	BQ27500, /* bq27500, bq27510, bq27520 */
+	BQ27530, /* bq27530, bq27531 */
+	BQ27541, /* bq27541, bq27542, bq27546, bq27742 */
+	BQ27545, /* bq27545 */
+	BQ27421, /* bq27421, bq27425, bq27441, bq27621 */
+};
+
+struct bq27xxx_platform_data {
+	const char *name;
+	enum bq27xxx_chip chip;
+	int (*read)(struct device *dev, unsigned int);
+};
+
+#endif
diff --git a/include/linux/power/charger-manager.h b/include/linux/power/charger-manager.h
index eadf28cb2fc9..c4fa907c8f14 100644
--- a/include/linux/power/charger-manager.h
+++ b/include/linux/power/charger-manager.h
@@ -65,7 +65,7 @@ struct charger_cable {
 	const char *extcon_name;
 	const char *name;
 
-	/* The charger-manager use Exton framework*/
+	/* The charger-manager use Extcon framework */
 	struct extcon_specific_cable_nb extcon_dev;
 	struct work_struct wq;
 	struct notifier_block nb;
@@ -94,7 +94,7 @@ struct charger_cable {
  *	the charger will be maintained with disabled state.
  * @cables:
  *	the array of charger cables to enable/disable charger
- *	and set current limit according to constratint data of
+ *	and set current limit according to constraint data of
  *	struct charger_cable if only charger cable included
  *	in the array of charger cables is attached/detached.
  * @num_cables: the number of charger cables.
@@ -148,7 +148,7 @@ struct charger_regulator {
  * @polling_interval_ms: interval in millisecond at which
  *	charger manager will monitor battery health
  * @battery_present:
- *	Specify where information for existance of battery can be obtained
+ *	Specify where information for existence of battery can be obtained
  * @psy_charger_stat: the names of power-supply for chargers
  * @num_charger_regulator: the number of entries in charger_regulators
  * @charger_regulators: array of charger regulators
@@ -156,7 +156,7 @@ struct charger_regulator {
  * @thermal_zone : the name of thermal zone for battery
  * @temp_min : Minimum battery temperature for charging.
  * @temp_max : Maximum battery temperature for charging.
- * @temp_diff : Temperature diffential to restart charging.
+ * @temp_diff : Temperature difference to restart charging.
  * @measure_battery_temp:
  *	true: measure battery temperature
  *	false: measure ambient temperature