Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Complete rework of garbage collection of AF_UNIX sockets.

     AF_UNIX is prone to forming reference count cycles due to fd
     passing functionality. New method based on Tarjan's Strongly
     Connected Components algorithm should be both faster and remove a
     lot of workarounds we accumulated over the years.

   - Add TCP fraglist GRO support, allowing chaining multiple TCP
     packets and forwarding them together. Useful for small switches /
     routers which lack basic checksum offload in some scenarios (e.g.
     PPPoE).

   - Support using SMP threads for handling packet backlog i.e. packet
     processing from software interfaces and old drivers which don't use
     NAPI. This helps move the processing out of the softirq jumble.

   - Continue work of converting from rtnl lock to RCU protection.

     Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
     address labels, netdev threaded NAPI sysfs files, bonding driver's
     sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
     TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
     of the link information available via rtnetlink.

   - Small optimizations from Eric to UDP wake up handling, memory
     accounting, RPS/RFS implementation, TCP packet sizing etc.

   - Allow direct page recycling in the bulk API used by XDP, for +2%
     PPS.

   - Support peek with an offset on TCP sockets.

   - Add MPTCP APIs for querying last time packets were received/sent/acked
     and whether MPTCP "upgrade" succeeded on a TCP socket.

   - Add intra-node communication shortcut to improve SMC performance.

   - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
     driver.

   - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.

   - Add reset reasons for tracing what caused a TCP reset to be sent.

   - Introduce direction attribute for xfrm (IPSec) states. State can be
     used either for input or output packet processing.

  Things we sprinkled into general kernel code:

   - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().

     This required touch-ups and renaming of a few existing users.

   - Add Endian-dependent __counted_by_{le,be} annotations.

   - Make building selftests "quieter" by printing summaries like
     "CC object.o" rather than full commands with all the arguments.

  Netfilter:

   - Use GFP_KERNEL to clone elements, to deal better with OOM
     situations and avoid failures in the .commit step.

  BPF:

   - Add eBPF JIT for ARCv2 CPUs.

   - Support attaching kprobe BPF programs through kprobe_multi link in
     a session mode, meaning, a BPF program is attached to both function
     entry and return, the entry program can decide if the return
     program gets executed and the entry program can share u64 cookie
     value with return program. "Session mode" is a common use-case for
     tetragon and bpftrace.

   - Add the ability to specify and retrieve BPF cookie for raw
     tracepoint programs in order to ease migration from classic to raw
     tracepoints.

   - Add an internal-only BPF per-CPU instruction for resolving per-CPU
     memory addresses and implement support in x86, ARM64 and RISC-V
     JITs. This allows inlining functions which need to access per-CPU
     state.

   - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
     atomics in bpf_arena which can be JITed as a single x86
     instruction. Support BPF arena on ARM64.

   - Add a new bpf_wq API for deferring events and refactor
     process-context bpf_timer code to keep common code where possible.

   - Harden the BPF verifier's and/or/xor value tracking.

   - Introduce crypto kfuncs to let BPF programs call kernel crypto
     APIs.

   - Support bpf_tail_call_static() helper for BPF programs with GCC 13.

   - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
     program to have code sections where preemption is disabled.

  Driver API:

   - Skip software TC processing completely if all installed rules are
     marked as HW-only, instead of checking the HW-only flag rule by
     rule.

   - Add support for configuring PoE (Power over Ethernet), similar to
     the already existing support for PoDL (Power over Data Line)
     config.

   - Initial bits of a queue control API, for now allowing a single
     queue to be reset without disturbing packet flow to other queues.

   - Common (ethtool) statistics for hardware timestamping.

  Tests and tooling:

   - Remove the need to create a config file to run the net forwarding
     tests so that a naive "make run_tests" can exercise them.

   - Define a method of writing tests which require an external endpoint
     to communicate with (to send/receive data towards the test
     machine). Add a few such tests.

   - Create a shared code library for writing Python tests. Expose the
     YAML Netlink library from tools/ to the tests for easy Netlink
     access.

   - Move netfilter tests under net/, extend them, separate performance
     tests from correctness tests, and iron out issues found by running
     them "on every commit".

   - Refactor BPF selftests to use common network helpers.

   - Further work filling in YAML definitions of Netlink messages for:
     nftables, team driver, bonding interfaces, vlan interfaces, VF
     info, TC u32 mark, TC police action.

   - Teach Python YAML Netlink to decode attribute policies.

   - Extend the definition of the "indexed array" construct in the specs
     to cover arrays of scalars rather than just nests.

   - Add hyperlinks between definitions in generated Netlink docs.

  Drivers:

   - Make sure unsupported flower control flags are rejected by drivers,
     and make more drivers report errors directly to the application
     rather than dmesg (large number of driver changes from Asbjørn
     Sloth Tønnesen).

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support multiple RSS contexts and steering traffic to them
         - support XDP metadata
         - make page pool allocations more NUMA aware
      - Intel (100G, ice, idpf):
         - extract datapath code common among Intel drivers into a library
         - use fewer resources in switchdev by sharing queues with the PF
         - add PFCP filter support
         - add Ethernet filter support
         - use a spinlock instead of HW lock in PTP clock ops
         - support 5 layer Tx scheduler topology
      - nVidia/Mellanox:
         - 800G link modes and 100G SerDes speeds
         - per-queue IRQ coalescing configuration
      - Marvell Octeon:
         - support offloading TC packet mark action

   - Ethernet NICs consumer, embedded and virtual:
      - stop lying about skb->truesize in USB Ethernet drivers, it
        messes up TCP memory calculations
      - Google cloud vNIC:
         - support changing ring size via ethtool
         - support ring reset using the queue control API
      - VirtIO net:
         - expose flow hash from RSS to XDP
         - per-queue statistics
         - add selftests
      - Synopsys (stmmac):
         - support controllers which require an RX clock signal from the
           MII bus to perform their hardware initialization
      - TI:
         - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
         - icssg_prueth: add SW TX / RX Coalescing based on hrtimers
         - cpsw: minimal XDP support
      - Renesas (ravb):
         - support describing the MDIO bus
      - Realtek (r8169):
         - add support for RTL8168M
      - Microchip Sparx5:
         - matchall and flower actions mirred and redirect

   - Ethernet switches:
      - nVidia/Mellanox:
         - improve events processing performance
      - Marvell:
         - add support for MV88E6250 family internal PHYs
      - Microchip:
         - add DCB and DSCP mapping support for KSZ switches
         - vsc73xx: convert to PHYLINK
      - Realtek:
         - rtl8226b/rtl8221b: add C45 instances and SerDes switching

   - Many driver changes related to PHYLIB and PHYLINK deprecated API
     cleanup

   - Ethernet PHYs:
      - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
      - micrel: lan8814: add support for PPS out and external timestamp trigger

   - WiFi:
      - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
        drivers. Modern devices can only be configured using nl80211.
      - mac80211/cfg80211
         - handle color change per link for WiFi 7 Multi-Link Operation
      - Intel (iwlwifi):
         - don't support puncturing in 5 GHz
         - support monitor mode on passive channels
         - BZ-W device support
         - P2P with HE/EHT support
         - re-add support for firmware API 90
         - provide channel survey information for Automatic Channel Selection
      - MediaTek (mt76):
         - mt7921 LED control
         - mt7925 EHT radiotap support
         - mt7920e PCI support
      - Qualcomm (ath11k):
         - P2P support for QCA6390, WCN6855 and QCA2066
         - support hibernation
         - ieee80211-freq-limit Device Tree property support
      - Qualcomm (ath12k):
         - refactoring in preparation of multi-link support
         - suspend and hibernation support
         - ACPI support
         - debugfs support, including dfs_simulate_radar support
      - RealTek:
         - rtw88: RTL8723CS SDIO device support
         - rtw89: RTL8922AE Wi-Fi 7 PCI device support
         - rtw89: complete features of new WiFi 7 chip 8922AE including
           BT-coexistence and Wake-on-WLAN
         - rtw89: use BIOS ACPI settings to set TX power and channels
         - rtl8xxxu: enable Management Frame Protection (MFP) support

   - Bluetooth:
      - support for Intel BlazarI and Filmore Peak2 (BE201)
      - support for MediaTek MT7921S SDIO
      - initial support for Intel PCIe BT driver
      - remove HCI_AMP support"

* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
  selftests: netfilter: fix packetdrill conntrack testcase
  net: gro: fix napi_gro_cb zeroed alignment
  Bluetooth: btintel_pcie: Refactor and code cleanup
  Bluetooth: btintel_pcie: Fix warning reported by sparse
  Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
  Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
  Bluetooth: btintel_pcie: Fix compiler warnings
  Bluetooth: btintel_pcie: Add *setup* function to download firmware
  Bluetooth: btintel_pcie: Add support for PCIe transport
  Bluetooth: btintel: Export few static functions
  Bluetooth: HCI: Remove HCI_AMP support
  Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
  Bluetooth: qca: Fix error code in qca_read_fw_build_info()
  Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
  Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
  Bluetooth: btintel: Add support for BlazarI
  LE Create Connection command timeout increased to 20 secs
  dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
  Bluetooth: compute LE flow credits based on recvbuf space
  Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
  ...

19 files changed, 522 insertions, 200 deletions

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 3c42b9f1bada..90706a47f6ff 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -1115,6 +1115,7 @@ enum bpf_attach_type {
 	BPF_CGROUP_UNIX_GETSOCKNAME,
 	BPF_NETKIT_PRIMARY,
 	BPF_NETKIT_PEER,
+	BPF_TRACE_KPROBE_SESSION,
 	__MAX_BPF_ATTACH_TYPE
 };
 
@@ -1135,6 +1136,7 @@ enum bpf_link_type {
 	BPF_LINK_TYPE_TCX = 11,
 	BPF_LINK_TYPE_UPROBE_MULTI = 12,
 	BPF_LINK_TYPE_NETKIT = 13,
+	BPF_LINK_TYPE_SOCKMAP = 14,
 	__MAX_BPF_LINK_TYPE,
 };
 
@@ -1662,8 +1664,10 @@ union bpf_attr {
 	} query;
 
 	struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */
-		__u64 name;
-		__u32 prog_fd;
+		__u64		name;
+		__u32		prog_fd;
+		__u32		:32;
+		__aligned_u64	cookie;
 	} raw_tracepoint;
 
 	struct { /* anonymous struct for BPF_BTF_LOAD */
@@ -3392,6 +3396,10 @@ union bpf_attr {
  *			for the nexthop. If the src addr cannot be derived,
  *			**BPF_FIB_LKUP_RET_NO_SRC_ADDR** is returned. In this
  *			case, *params*->dmac and *params*->smac are not set either.
+ *		**BPF_FIB_LOOKUP_MARK**
+ *			Use the mark present in *params*->mark for the fib lookup.
+ *			This option should not be used with BPF_FIB_LOOKUP_DIRECT,
+ *			as it only has meaning for full lookups.
  *
  *		*ctx* is either **struct xdp_md** for XDP programs or
  *		**struct sk_buff** tc cls_act programs.
@@ -5020,7 +5028,7 @@ union bpf_attr {
  *		bytes will be copied to *dst*
  *	Return
  *		The **hash_algo** is returned on success,
- *		**-EOPNOTSUP** if IMA is disabled or **-EINVAL** if
+ *		**-EOPNOTSUPP** if IMA is disabled or **-EINVAL** if
  *		invalid arguments are passed.
  *
  * struct socket *bpf_sock_from_file(struct file *file)
@@ -5506,7 +5514,7 @@ union bpf_attr {
  *		bytes will be copied to *dst*
  *	Return
  *		The **hash_algo** is returned on success,
- *		**-EOPNOTSUP** if the hash calculation failed or **-EINVAL** if
+ *		**-EOPNOTSUPP** if the hash calculation failed or **-EINVAL** if
  *		invalid arguments are passed.
  *
  * void *bpf_kptr_xchg(void *map_value, void *ptr)
@@ -6718,6 +6726,10 @@ struct bpf_link_info {
 			__u32 ifindex;
 			__u32 attach_type;
 		} netkit;
+		struct {
+			__u32 map_id;
+			__u32 attach_type;
+		} sockmap;
 	};
 } __attribute__((aligned(8)));
 
@@ -6936,6 +6948,8 @@ enum {
 					 * socket transition to LISTEN state.
 					 */
 	BPF_SOCK_OPS_RTT_CB,		/* Called on every RTT.
+					 * Arg1: measured RTT input (mrtt)
+					 * Arg2: updated srtt
 					 */
 	BPF_SOCK_OPS_PARSE_HDR_OPT_CB,	/* Parse the header option.
 					 * It will be called to handle
@@ -7118,6 +7132,7 @@ enum {
 	BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2),
 	BPF_FIB_LOOKUP_TBID    = (1U << 3),
 	BPF_FIB_LOOKUP_SRC     = (1U << 4),
+	BPF_FIB_LOOKUP_MARK    = (1U << 5),
 };
 
 enum {
@@ -7150,7 +7165,7 @@ struct bpf_fib_lookup {
 
 		/* output: MTU value */
 		__u16	mtu_result;
-	};
+	} __attribute__((packed, aligned(2)));
 	/* input: L3 device index for lookup
 	 * output: device index from FIB lookup
 	 */
@@ -7195,8 +7210,19 @@ struct bpf_fib_lookup {
 		__u32	tbid;
 	};
 
-	__u8	smac[6];     /* ETH_ALEN */
-	__u8	dmac[6];     /* ETH_ALEN */
+	union {
+		/* input */
+		struct {
+			__u32	mark;   /* policy routing */
+			/* 2 4-byte holes for input */
+		};
+
+		/* output: source and dest mac */
+		struct {
+			__u8	smac[6];	/* ETH_ALEN */
+			__u8	dmac[6];	/* ETH_ALEN */
+		};
+	};
 };
 
 struct bpf_redir_neigh {
@@ -7283,6 +7309,10 @@ struct bpf_timer {
 	__u64 __opaque[2];
 } __attribute__((aligned(8)));
 
+struct bpf_wq {
+	__u64 __opaque[2];
+} __attribute__((aligned(8)));
+
 struct bpf_dynptr {
 	__u64 __opaque[2];
 } __attribute__((aligned(8)));
diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
index 2da0c7eb6710..9401aa343673 100644
--- a/include/uapi/linux/devlink.h
+++ b/include/uapi/linux/devlink.h
@@ -686,6 +686,7 @@ enum devlink_port_function_attr {
 	DEVLINK_PORT_FN_ATTR_OPSTATE,	/* u8 */
 	DEVLINK_PORT_FN_ATTR_CAPS,	/* bitfield32 */
 	DEVLINK_PORT_FN_ATTR_DEVLINK,	/* nested */
+	DEVLINK_PORT_FN_ATTR_MAX_IO_EQS,	/* u32 */
 
 	__DEVLINK_PORT_FUNCTION_ATTR_MAX,
 	DEVLINK_PORT_FUNCTION_ATTR_MAX = __DEVLINK_PORT_FUNCTION_ATTR_MAX - 1
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 11fc18988bc2..8733a3117902 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -753,6 +753,61 @@ enum ethtool_module_power_mode {
 };
 
 /**
+ * enum ethtool_pse_types - Types of PSE controller.
+ * @ETHTOOL_PSE_UNKNOWN: Type of PSE controller is unknown
+ * @ETHTOOL_PSE_PODL: PSE controller which support PoDL
+ * @ETHTOOL_PSE_C33: PSE controller which support Clause 33 (PoE)
+ */
+enum ethtool_pse_types {
+	ETHTOOL_PSE_UNKNOWN =	1 << 0,
+	ETHTOOL_PSE_PODL =	1 << 1,
+	ETHTOOL_PSE_C33 =	1 << 2,
+};
+
+/**
+ * enum ethtool_c33_pse_admin_state - operational state of the PoDL PSE
+ *	functions. IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState
+ * @ETHTOOL_C33_PSE_ADMIN_STATE_UNKNOWN: state of PSE functions is unknown
+ * @ETHTOOL_C33_PSE_ADMIN_STATE_DISABLED: PSE functions are disabled
+ * @ETHTOOL_C33_PSE_ADMIN_STATE_ENABLED: PSE functions are enabled
+ */
+enum ethtool_c33_pse_admin_state {
+	ETHTOOL_C33_PSE_ADMIN_STATE_UNKNOWN = 1,
+	ETHTOOL_C33_PSE_ADMIN_STATE_DISABLED,
+	ETHTOOL_C33_PSE_ADMIN_STATE_ENABLED,
+};
+
+/**
+ * enum ethtool_c33_pse_pw_d_status - power detection status of the PSE.
+ *	IEEE 802.3-2022 30.9.1.1.3 aPoDLPSEPowerDetectionStatus:
+ * @ETHTOOL_C33_PSE_PW_D_STATUS_UNKNOWN: PSE status is unknown
+ * @ETHTOOL_C33_PSE_PW_D_STATUS_DISABLED: The enumeration "disabled"
+ *	indicates that the PSE State diagram is in the state DISABLED.
+ * @ETHTOOL_C33_PSE_PW_D_STATUS_SEARCHING: The enumeration "searching"
+ *	indicates the PSE State diagram is in a state other than those
+ *	listed.
+ * @ETHTOOL_C33_PSE_PW_D_STATUS_DELIVERING: The enumeration
+ *	"deliveringPower" indicates that the PSE State diagram is in the
+ *	state POWER_ON.
+ * @ETHTOOL_C33_PSE_PW_D_STATUS_TEST: The enumeration "test" indicates that
+ *	the PSE State diagram is in the state TEST_MODE.
+ * @ETHTOOL_C33_PSE_PW_D_STATUS_FAULT: The enumeration "fault" indicates that
+ *	the PSE State diagram is in the state TEST_ERROR.
+ * @ETHTOOL_C33_PSE_PW_D_STATUS_OTHERFAULT: The enumeration "otherFault"
+ *	indicates that the PSE State diagram is in the state IDLE due to
+ *	the variable error_condition = true.
+ */
+enum ethtool_c33_pse_pw_d_status {
+	ETHTOOL_C33_PSE_PW_D_STATUS_UNKNOWN = 1,
+	ETHTOOL_C33_PSE_PW_D_STATUS_DISABLED,
+	ETHTOOL_C33_PSE_PW_D_STATUS_SEARCHING,
+	ETHTOOL_C33_PSE_PW_D_STATUS_DELIVERING,
+	ETHTOOL_C33_PSE_PW_D_STATUS_TEST,
+	ETHTOOL_C33_PSE_PW_D_STATUS_FAULT,
+	ETHTOOL_C33_PSE_PW_D_STATUS_OTHERFAULT,
+};
+
+/**
  * enum ethtool_podl_pse_admin_state - operational state of the PoDL PSE
  *	functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState
  * @ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN: state of PoDL PSE functions are
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index 3f89074aa06c..b49b804b9495 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -117,12 +117,11 @@ enum {
 
 /* request header */
 
-/* use compact bitsets in reply */
-#define ETHTOOL_FLAG_COMPACT_BITSETS	(1 << 0)
-/* provide optional reply for SET or ACT requests */
-#define ETHTOOL_FLAG_OMIT_REPLY	(1 << 1)
-/* request statistics, if supported by the driver */
-#define ETHTOOL_FLAG_STATS		(1 << 2)
+enum ethtool_header_flags {
+	ETHTOOL_FLAG_COMPACT_BITSETS	= 1 << 0,	/* use compact bitsets in reply */
+	ETHTOOL_FLAG_OMIT_REPLY		= 1 << 1,	/* provide optional reply for SET or ACT requests */
+	ETHTOOL_FLAG_STATS		= 1 << 2,	/* request statistics, if supported by the driver */
+};
 
 #define ETHTOOL_FLAG_ALL (ETHTOOL_FLAG_COMPACT_BITSETS | \
 			  ETHTOOL_FLAG_OMIT_REPLY | \
@@ -478,12 +477,26 @@ enum {
 	ETHTOOL_A_TSINFO_TX_TYPES,			/* bitset */
 	ETHTOOL_A_TSINFO_RX_FILTERS,			/* bitset */
 	ETHTOOL_A_TSINFO_PHC_INDEX,			/* u32 */
+	ETHTOOL_A_TSINFO_STATS,				/* nest - _A_TSINFO_STAT */
 
 	/* add new constants above here */
 	__ETHTOOL_A_TSINFO_CNT,
 	ETHTOOL_A_TSINFO_MAX = (__ETHTOOL_A_TSINFO_CNT - 1)
 };
 
+enum {
+	ETHTOOL_A_TS_STAT_UNSPEC,
+
+	ETHTOOL_A_TS_STAT_TX_PKTS,			/* uint */
+	ETHTOOL_A_TS_STAT_TX_LOST,			/* uint */
+	ETHTOOL_A_TS_STAT_TX_ERR,			/* uint */
+
+	/* add new constants above here */
+	__ETHTOOL_A_TS_STAT_CNT,
+	ETHTOOL_A_TS_STAT_MAX = (__ETHTOOL_A_TS_STAT_CNT - 1)
+
+};
+
 /* PHC VCLOCKS */
 
 enum {
@@ -515,6 +528,10 @@ enum {
 	ETHTOOL_A_CABLE_RESULT_CODE_OPEN,
 	ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT,
 	ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT,
+	/* detected reflection caused by the impedance discontinuity between
+	 * a regular 100 Ohm cable and a part with the abnormal impedance value
+	 */
+	ETHTOOL_A_CABLE_RESULT_CODE_IMPEDANCE_MISMATCH,
 };
 
 enum {
@@ -895,6 +912,9 @@ enum {
 	ETHTOOL_A_PODL_PSE_ADMIN_STATE,		/* u32 */
 	ETHTOOL_A_PODL_PSE_ADMIN_CONTROL,	/* u32 */
 	ETHTOOL_A_PODL_PSE_PW_D_STATUS,		/* u32 */
+	ETHTOOL_A_C33_PSE_ADMIN_STATE,		/* u32 */
+	ETHTOOL_A_C33_PSE_ADMIN_CONTROL,	/* u32 */
+	ETHTOOL_A_C33_PSE_PW_D_STATUS,		/* u32 */
 
 	/* add new constants above here */
 	__ETHTOOL_A_PSE_CNT,
diff --git a/include/uapi/linux/gtp.h b/include/uapi/linux/gtp.h
index 3dcdb9e33cba..40f5388d6de0 100644
--- a/include/uapi/linux/gtp.h
+++ b/include/uapi/linux/gtp.h
@@ -31,6 +31,9 @@ enum gtp_attrs {
 	GTPA_I_TEI,	/* for GTPv1 only */
 	GTPA_O_TEI,	/* for GTPv1 only */
 	GTPA_PAD,
+	GTPA_PEER_ADDR6,
+	GTPA_MS_ADDR6,
+	GTPA_FAMILY,
 	__GTPA_MAX,
 };
 #define GTPA_MAX (__GTPA_MAX - 1)
diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h
index ecaece3af38d..4eaab89e2856 100644
--- a/include/uapi/linux/icmpv6.h
+++ b/include/uapi/linux/icmpv6.h
@@ -112,6 +112,7 @@ struct icmp6hdr {
 #define ICMPV6_MOBILE_PREFIX_ADV	147
 
 #define ICMPV6_MRDISC_ADV		151
+#define ICMPV6_MRDISC_SOL		152
 
 #define ICMPV6_MSG_MAX          255
 
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index ffa637b38c93..6dc258993b17 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -1466,6 +1466,8 @@ enum {
 	IFLA_GTP_ROLE,
 	IFLA_GTP_CREATE_SOCKETS,
 	IFLA_GTP_RESTART_COUNT,
+	IFLA_GTP_LOCAL,
+	IFLA_GTP_LOCAL6,
 	__IFLA_GTP_MAX,
 };
 #define IFLA_GTP_MAX (__IFLA_GTP_MAX - 1)
@@ -1771,6 +1773,7 @@ enum {
 	IFLA_HSR_PROTOCOL,		/* Indicate different protocol than
 					 * HSR. For example PRP.
 					 */
+	IFLA_HSR_INTERLINK,		/* HSR interlink network device */
 	__IFLA_HSR_MAX,
 };
 
diff --git a/include/uapi/linux/if_team.h b/include/uapi/linux/if_team.h
index 13c61fecb78b..a5c06243a435 100644
--- a/include/uapi/linux/if_team.h
+++ b/include/uapi/linux/if_team.h
@@ -1,108 +1,78 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
-/*
- * include/linux/if_team.h - Network team device driver header
- * Copyright (c) 2011 Jiri Pirko <jpirko@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
+/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
+/* Do not edit directly, auto-generated from: */
+/*	Documentation/netlink/specs/team.yaml */
+/* YNL-GEN uapi header */
 
-#ifndef _UAPI_LINUX_IF_TEAM_H_
-#define _UAPI_LINUX_IF_TEAM_H_
+#ifndef _UAPI_LINUX_IF_TEAM_H
+#define _UAPI_LINUX_IF_TEAM_H
 
+#define TEAM_GENL_NAME		"team"
+#define TEAM_GENL_VERSION	1
 
-#define TEAM_STRING_MAX_LEN 32
-
-/**********************************
- * NETLINK_GENERIC netlink family.
- **********************************/
-
-enum {
-	TEAM_CMD_NOOP,
-	TEAM_CMD_OPTIONS_SET,
-	TEAM_CMD_OPTIONS_GET,
-	TEAM_CMD_PORT_LIST_GET,
-
-	__TEAM_CMD_MAX,
-	TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1),
-};
+#define TEAM_STRING_MAX_LEN			32
+#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME	"change_event"
 
 enum {
 	TEAM_ATTR_UNSPEC,
-	TEAM_ATTR_TEAM_IFINDEX,		/* u32 */
-	TEAM_ATTR_LIST_OPTION,		/* nest */
-	TEAM_ATTR_LIST_PORT,		/* nest */
+	TEAM_ATTR_TEAM_IFINDEX,
+	TEAM_ATTR_LIST_OPTION,
+	TEAM_ATTR_LIST_PORT,
 
 	__TEAM_ATTR_MAX,
-	TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1,
+	TEAM_ATTR_MAX = (__TEAM_ATTR_MAX - 1)
 };
 
-/* Nested layout of get/set msg:
- *
- *	[TEAM_ATTR_LIST_OPTION]
- *		[TEAM_ATTR_ITEM_OPTION]
- *			[TEAM_ATTR_OPTION_*], ...
- *		[TEAM_ATTR_ITEM_OPTION]
- *			[TEAM_ATTR_OPTION_*], ...
- *		...
- *	[TEAM_ATTR_LIST_PORT]
- *		[TEAM_ATTR_ITEM_PORT]
- *			[TEAM_ATTR_PORT_*], ...
- *		[TEAM_ATTR_ITEM_PORT]
- *			[TEAM_ATTR_PORT_*], ...
- *		...
- */
-
 enum {
 	TEAM_ATTR_ITEM_OPTION_UNSPEC,
-	TEAM_ATTR_ITEM_OPTION,		/* nest */
+	TEAM_ATTR_ITEM_OPTION,
 
 	__TEAM_ATTR_ITEM_OPTION_MAX,
-	TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1,
+	TEAM_ATTR_ITEM_OPTION_MAX = (__TEAM_ATTR_ITEM_OPTION_MAX - 1)
 };
 
 enum {
 	TEAM_ATTR_OPTION_UNSPEC,
-	TEAM_ATTR_OPTION_NAME,		/* string */
-	TEAM_ATTR_OPTION_CHANGED,	/* flag */
-	TEAM_ATTR_OPTION_TYPE,		/* u8 */
-	TEAM_ATTR_OPTION_DATA,		/* dynamic */
-	TEAM_ATTR_OPTION_REMOVED,	/* flag */
-	TEAM_ATTR_OPTION_PORT_IFINDEX,	/* u32 */ /* for per-port options */
-	TEAM_ATTR_OPTION_ARRAY_INDEX,	/* u32 */ /* for array options */
+	TEAM_ATTR_OPTION_NAME,
+	TEAM_ATTR_OPTION_CHANGED,
+	TEAM_ATTR_OPTION_TYPE,
+	TEAM_ATTR_OPTION_DATA,
+	TEAM_ATTR_OPTION_REMOVED,
+	TEAM_ATTR_OPTION_PORT_IFINDEX,
+	TEAM_ATTR_OPTION_ARRAY_INDEX,
 
 	__TEAM_ATTR_OPTION_MAX,
-	TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1,
+	TEAM_ATTR_OPTION_MAX = (__TEAM_ATTR_OPTION_MAX - 1)
 };
 
 enum {
 	TEAM_ATTR_ITEM_PORT_UNSPEC,
-	TEAM_ATTR_ITEM_PORT,		/* nest */
+	TEAM_ATTR_ITEM_PORT,
 
 	__TEAM_ATTR_ITEM_PORT_MAX,
-	TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1,
+	TEAM_ATTR_ITEM_PORT_MAX = (__TEAM_ATTR_ITEM_PORT_MAX - 1)
 };
 
 enum {
 	TEAM_ATTR_PORT_UNSPEC,
-	TEAM_ATTR_PORT_IFINDEX,		/* u32 */
-	TEAM_ATTR_PORT_CHANGED,		/* flag */
-	TEAM_ATTR_PORT_LINKUP,		/* flag */
-	TEAM_ATTR_PORT_SPEED,		/* u32 */
-	TEAM_ATTR_PORT_DUPLEX,		/* u8 */
-	TEAM_ATTR_PORT_REMOVED,		/* flag */
+	TEAM_ATTR_PORT_IFINDEX,
+	TEAM_ATTR_PORT_CHANGED,
+	TEAM_ATTR_PORT_LINKUP,
+	TEAM_ATTR_PORT_SPEED,
+	TEAM_ATTR_PORT_DUPLEX,
+	TEAM_ATTR_PORT_REMOVED,
 
 	__TEAM_ATTR_PORT_MAX,
-	TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1,
+	TEAM_ATTR_PORT_MAX = (__TEAM_ATTR_PORT_MAX - 1)
 };
 
-/*
- * NETLINK_GENERIC related info
- */
-#define TEAM_GENL_NAME "team"
-#define TEAM_GENL_VERSION 0x1
-#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event"
+enum {
+	TEAM_CMD_NOOP,
+	TEAM_CMD_OPTIONS_SET,
+	TEAM_CMD_OPTIONS_GET,
+	TEAM_CMD_PORT_LIST_GET,
+
+	__TEAM_CMD_MAX,
+	TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1)
+};
 
-#endif /* _UAPI_LINUX_IF_TEAM_H_ */
+#endif /* _UAPI_LINUX_IF_TEAM_H */
diff --git a/include/uapi/linux/if_tunnel.h b/include/uapi/linux/if_tunnel.h
index 102119628ff5..e1a246dd8c62 100644
--- a/include/uapi/linux/if_tunnel.h
+++ b/include/uapi/linux/if_tunnel.h
@@ -161,6 +161,14 @@ enum {
 
 #define IFLA_VTI_MAX	(__IFLA_VTI_MAX - 1)
 
+#ifndef __KERNEL__
+/* Historically, tunnel flags have been defined as __be16 and now there are
+ * no free bits left. It is strongly advised to switch the already existing
+ * userspace code to the new *_BIT definitions from down below, as __be16
+ * can't be simply cast to a wider type on LE systems. All new flags and
+ * code must use *_BIT only.
+ */
+
 #define TUNNEL_CSUM		__cpu_to_be16(0x01)
 #define TUNNEL_ROUTING		__cpu_to_be16(0x02)
 #define TUNNEL_KEY		__cpu_to_be16(0x04)
@@ -181,5 +189,33 @@ enum {
 #define TUNNEL_OPTIONS_PRESENT \
 		(TUNNEL_GENEVE_OPT | TUNNEL_VXLAN_OPT | TUNNEL_ERSPAN_OPT | \
 		TUNNEL_GTP_OPT)
+#endif
+
+enum {
+	IP_TUNNEL_CSUM_BIT		= 0U,
+	IP_TUNNEL_ROUTING_BIT,
+	IP_TUNNEL_KEY_BIT,
+	IP_TUNNEL_SEQ_BIT,
+	IP_TUNNEL_STRICT_BIT,
+	IP_TUNNEL_REC_BIT,
+	IP_TUNNEL_VERSION_BIT,
+	IP_TUNNEL_NO_KEY_BIT,
+	IP_TUNNEL_DONT_FRAGMENT_BIT,
+	IP_TUNNEL_OAM_BIT,
+	IP_TUNNEL_CRIT_OPT_BIT,
+	IP_TUNNEL_GENEVE_OPT_BIT,	/* OPTIONS_PRESENT */
+	IP_TUNNEL_VXLAN_OPT_BIT,	/* OPTIONS_PRESENT */
+	IP_TUNNEL_NOCACHE_BIT,
+	IP_TUNNEL_ERSPAN_OPT_BIT,	/* OPTIONS_PRESENT */
+	IP_TUNNEL_GTP_OPT_BIT,		/* OPTIONS_PRESENT */
+
+	IP_TUNNEL_VTI_BIT,
+	IP_TUNNEL_SIT_ISATAP_BIT	= IP_TUNNEL_VTI_BIT,
+
+	/* Flags starting from here are not available via the old UAPI */
+	IP_TUNNEL_PFCP_OPT_BIT,		/* OPTIONS_PRESENT */
+
+	__IP_TUNNEL_FLAG_NUM,
+};
 
 #endif /* _UAPI_IF_TUNNEL_H_ */
diff --git a/include/uapi/linux/mptcp.h b/include/uapi/linux/mptcp.h
index 74cfe496891e..67d015df8893 100644
--- a/include/uapi/linux/mptcp.h
+++ b/include/uapi/linux/mptcp.h
@@ -58,6 +58,10 @@ struct mptcp_info {
 	__u64	mptcpi_bytes_received;
 	__u64	mptcpi_bytes_acked;
 	__u8	mptcpi_subflows_total;
+	__u8	reserved[3];
+	__u32	mptcpi_last_data_sent;
+	__u32	mptcpi_last_data_recv;
+	__u32	mptcpi_last_ack_recv;
 };
 
 /* MPTCP Reset reason codes, rfc8684 */
diff --git a/include/uapi/linux/netdev.h b/include/uapi/linux/netdev.h
index bb65ee840cda..a8188202413e 100644
--- a/include/uapi/linux/netdev.h
+++ b/include/uapi/linux/netdev.h
@@ -146,6 +146,27 @@ enum {
 	NETDEV_A_QSTATS_TX_PACKETS,
 	NETDEV_A_QSTATS_TX_BYTES,
 	NETDEV_A_QSTATS_RX_ALLOC_FAIL,
+	NETDEV_A_QSTATS_RX_HW_DROPS,
+	NETDEV_A_QSTATS_RX_HW_DROP_OVERRUNS,
+	NETDEV_A_QSTATS_RX_CSUM_UNNECESSARY,
+	NETDEV_A_QSTATS_RX_CSUM_NONE,
+	NETDEV_A_QSTATS_RX_CSUM_BAD,
+	NETDEV_A_QSTATS_RX_HW_GRO_PACKETS,
+	NETDEV_A_QSTATS_RX_HW_GRO_BYTES,
+	NETDEV_A_QSTATS_RX_HW_GRO_WIRE_PACKETS,
+	NETDEV_A_QSTATS_RX_HW_GRO_WIRE_BYTES,
+	NETDEV_A_QSTATS_RX_HW_DROP_RATELIMITS,
+	NETDEV_A_QSTATS_TX_HW_DROPS,
+	NETDEV_A_QSTATS_TX_HW_DROP_ERRORS,
+	NETDEV_A_QSTATS_TX_CSUM_NONE,
+	NETDEV_A_QSTATS_TX_NEEDS_CSUM,
+	NETDEV_A_QSTATS_TX_HW_GSO_PACKETS,
+	NETDEV_A_QSTATS_TX_HW_GSO_BYTES,
+	NETDEV_A_QSTATS_TX_HW_GSO_WIRE_PACKETS,
+	NETDEV_A_QSTATS_TX_HW_GSO_WIRE_BYTES,
+	NETDEV_A_QSTATS_TX_HW_DROP_RATELIMITS,
+	NETDEV_A_QSTATS_TX_STOP,
+	NETDEV_A_QSTATS_TX_WAKE,
 
 	__NETDEV_A_QSTATS_MAX,
 	NETDEV_A_QSTATS_MAX = (__NETDEV_A_QSTATS_MAX - 1)
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index f23ecbdd84a2..f917bc6c9b6f 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -413,8 +413,8 @@
  *	are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
  *	do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
  *	%NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
- *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
- *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
+ *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
+ *	%NL80211_ATTR_CIPHER_SUITE_GROUP, %NL80211_ATTR_WPA_VERSIONS,
  *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
  *	%NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
  *	%NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
@@ -442,20 +442,15 @@
  *	stations connected and using at least that link as one of its links.
  *
  * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
- * 	destination %NL80211_ATTR_MAC on the interface identified by
- * 	%NL80211_ATTR_IFINDEX.
+ *	destination %NL80211_ATTR_MAC on the interface identified by
+ *	%NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
- * 	destination %NL80211_ATTR_MAC on the interface identified by
- * 	%NL80211_ATTR_IFINDEX.
+ *	destination %NL80211_ATTR_MAC on the interface identified by
+ *	%NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
  *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
  * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
  *	%NL80211_ATTR_MAC.
- * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
- *	interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
- *	or, if no MAC address given, all mesh paths, on the interface identified
- *	by %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
  *	%NL80211_ATTR_IFINDEX.
  *
@@ -476,15 +471,15 @@
  *	after being queried by the kernel. CRDA replies by sending a regulatory
  *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
  *	current alpha2 if it found a match. It also provides
- * 	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
- * 	regulatory rule is a nested set of attributes  given by
- * 	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and
- * 	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
- * 	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
- * 	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
+ *	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
+ *	regulatory rule is a nested set of attributes  given by
+ *	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and
+ *	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
+ *	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
+ *	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
  * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
- * 	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
- * 	store this as a valid request and then query userspace for it.
+ *	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
+ *	store this as a valid request and then query userspace for it.
  *
  * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
  *	interface identified by %NL80211_ATTR_IFINDEX
@@ -574,31 +569,31 @@
  * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
  *
  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
- * 	has been changed and provides details of the request information
- * 	that caused the change such as who initiated the regulatory request
- * 	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
- * 	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
- * 	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
- * 	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
- * 	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
- * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
- * 	to (%NL80211_ATTR_REG_ALPHA2).
+ *	has been changed and provides details of the request information
+ *	that caused the change such as who initiated the regulatory request
+ *	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
+ *	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
+ *	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
+ *	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
+ *	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
+ *	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
+ *	to (%NL80211_ATTR_REG_ALPHA2).
  * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
- * 	has been found while world roaming thus enabling active scan or
- * 	any mode of operation that initiates TX (beacons) on a channel
- * 	where we would not have been able to do either before. As an example
- * 	if you are world roaming (regulatory domain set to world or if your
- * 	driver is using a custom world roaming regulatory domain) and while
- * 	doing a passive scan on the 5 GHz band you find an AP there (if not
- * 	on a DFS channel) you will now be able to actively scan for that AP
- * 	or use AP mode on your card on that same channel. Note that this will
- * 	never be used for channels 1-11 on the 2 GHz band as they are always
- * 	enabled world wide. This beacon hint is only sent if your device had
- * 	either disabled active scanning or beaconing on a channel. We send to
- * 	userspace the wiphy on which we removed a restriction from
- * 	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
- * 	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
- * 	the beacon hint was processed.
+ *	has been found while world roaming thus enabling active scan or
+ *	any mode of operation that initiates TX (beacons) on a channel
+ *	where we would not have been able to do either before. As an example
+ *	if you are world roaming (regulatory domain set to world or if your
+ *	driver is using a custom world roaming regulatory domain) and while
+ *	doing a passive scan on the 5 GHz band you find an AP there (if not
+ *	on a DFS channel) you will now be able to actively scan for that AP
+ *	or use AP mode on your card on that same channel. Note that this will
+ *	never be used for channels 1-11 on the 2 GHz band as they are always
+ *	enabled world wide. This beacon hint is only sent if your device had
+ *	either disabled active scanning or beaconing on a channel. We send to
+ *	userspace the wiphy on which we removed a restriction from
+ *	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
+ *	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
+ *	the beacon hint was processed.
  *
  * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
  *	This command is used both as a command (request to authenticate) and
@@ -1120,7 +1115,7 @@
  *	current configuration is not changed.  If it is present but
  *	set to zero, the configuration is changed to don't-care
  *	(i.e. the device can decide what to do).
- * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
+ * @NL80211_CMD_NAN_MATCH: Notification sent when a match is reported.
  *	This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
  *	%NL80211_ATTR_COOKIE.
  *
@@ -1715,21 +1710,21 @@ enum nl80211_commands {
  *	(see &enum nl80211_plink_action).
  * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
  * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
- * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
+ *	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
  *	&enum nl80211_mpath_info.
  *
  * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
  *      &enum nl80211_mntr_flags.
  *
  * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
- * 	current regulatory domain should be set to or is already set to.
- * 	For example, 'CR', for Costa Rica. This attribute is used by the kernel
- * 	to query the CRDA to retrieve one regulatory domain. This attribute can
- * 	also be used by userspace to query the kernel for the currently set
- * 	regulatory domain. We chose an alpha2 as that is also used by the
- * 	IEEE-802.11 country information element to identify a country.
- * 	Users can also simply ask the wireless core to set regulatory domain
- * 	to a specific alpha2.
+ *	current regulatory domain should be set to or is already set to.
+ *	For example, 'CR', for Costa Rica. This attribute is used by the kernel
+ *	to query the CRDA to retrieve one regulatory domain. This attribute can
+ *	also be used by userspace to query the kernel for the currently set
+ *	regulatory domain. We chose an alpha2 as that is also used by the
+ *	IEEE-802.11 country information element to identify a country.
+ *	Users can also simply ask the wireless core to set regulatory domain
+ *	to a specific alpha2.
  * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
  *	rules.
  *
@@ -1772,9 +1767,9 @@ enum nl80211_commands {
  * @NL80211_ATTR_BSS: scan result BSS
  *
  * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
- * 	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
+ *	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
  * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
- * 	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
+ *	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
  *
  * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
  *	an array of command numbers (i.e. a mapping index to command number)
@@ -1793,15 +1788,15 @@ enum nl80211_commands {
  *	a u32
  *
  * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
- * 	due to considerations from a beacon hint. This attribute reflects
- * 	the state of the channel _before_ the beacon hint processing. This
- * 	attributes consists of a nested attribute containing
- * 	NL80211_FREQUENCY_ATTR_*
+ *	due to considerations from a beacon hint. This attribute reflects
+ *	the state of the channel _before_ the beacon hint processing. This
+ *	attributes consists of a nested attribute containing
+ *	NL80211_FREQUENCY_ATTR_*
  * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
- * 	due to considerations from a beacon hint. This attribute reflects
- * 	the state of the channel _after_ the beacon hint processing. This
- * 	attributes consists of a nested attribute containing
- * 	NL80211_FREQUENCY_ATTR_*
+ *	due to considerations from a beacon hint. This attribute reflects
+ *	the state of the channel _after_ the beacon hint processing. This
+ *	attributes consists of a nested attribute containing
+ *	NL80211_FREQUENCY_ATTR_*
  *
  * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
  *	cipher suites
@@ -1862,12 +1857,6 @@ enum nl80211_commands {
  *	that protected APs should be used. This is also used with NEW_BEACON to
  *	indicate that the BSS is to use protection.
  *
- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
- *	to indicate which unicast key ciphers will be used with the connection
- *	(an array of u32).
- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- *	indicate which group key cipher will be used with the connection (a
- *	u32).
  * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
  *	indicate which WPA version(s) the AP we want to associate with is using
  *	(a u32 with flags from &enum nl80211_wpa_versions).
@@ -1898,6 +1887,7 @@ enum nl80211_commands {
  *	with %NL80211_KEY_* sub-attributes
  *
  * @NL80211_ATTR_PID: Process ID of a network namespace.
+ * @NL80211_ATTR_NETNS_FD: File descriptor of a network namespace.
  *
  * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
  *	dumps. This number increases whenever the object list being
@@ -1952,6 +1942,7 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
  *	acknowledged by the recipient.
+ * @NL80211_ATTR_ACK_SIGNAL: Station's ack signal strength (s32)
  *
  * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
  *
@@ -2149,6 +2140,9 @@ enum nl80211_commands {
  * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
  *      this feature during association. This is a flag attribute.
  *	Currently only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_EHT: Force EHT capable interfaces to disable
+ *      this feature during association. This is a flag attribute.
+ *	Currently only supported in mac80211 drivers.
  * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
  *      ATTR_HT_CAPABILITY to which attention should be paid.
  *      Currently, only mac80211 NICs support this feature.
@@ -2158,6 +2152,12 @@ enum nl80211_commands {
  *      All values are treated as suggestions and may be ignored
  *      by the driver as required.  The actual values may be seen in
  *      the station debugfs ht_caps file.
+ * @NL80211_ATTR_VHT_CAPABILITY_MASK: Specify which bits of the
+ *      ATTR_VHT_CAPABILITY to which attention should be paid.
+ *      Currently, only mac80211 NICs support this feature.
+ *      All values are treated as suggestions and may be ignored
+ *      by the driver as required.  The actual values may be seen in
+ *      the station debugfs vht_caps file.
  *
  * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
  *    abides to when initiating radiation on DFS channels. A country maps
@@ -2416,7 +2416,7 @@ enum nl80211_commands {
  *	scheduled scan is started.  Or the delay before a WoWLAN
  *	net-detect scan is started, counting from the moment the
  *	system is suspended.  This value is a u32, in seconds.
-
+ *
  * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
  *      is operating in an indoor environment.
  *
@@ -3565,7 +3565,7 @@ enum nl80211_sta_flags {
  * enum nl80211_sta_p2p_ps_status - station support of P2P PS
  *
  * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
- * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
+ * @NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
  * @NUM_NL80211_P2P_PS_STATUS: number of values
  */
 enum nl80211_sta_p2p_ps_status {
@@ -3603,9 +3603,9 @@ enum nl80211_he_gi {
 
 /**
  * enum nl80211_he_ltf - HE long training field
- * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec
- * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec
- * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec
+ * @NL80211_RATE_INFO_HE_1XLTF: 3.2 usec
+ * @NL80211_RATE_INFO_HE_2XLTF: 6.4 usec
+ * @NL80211_RATE_INFO_HE_4XLTF: 12.8 usec
  */
 enum nl80211_he_ltf {
 	NL80211_RATE_INFO_HE_1XLTF,
@@ -3720,7 +3720,7 @@ enum nl80211_eht_ru_alloc {
  * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
  *	(u8, see &enum nl80211_he_gi)
  * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
- * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
+ * @NL80211_RATE_INFO_HE_RU_ALLOC: HE RU allocation, if not present then
  *	non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
  * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate
  * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15)
@@ -3823,7 +3823,7 @@ enum nl80211_sta_bss_param {
  *	(u64, to this station)
  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * 	containing info as possible, see &enum nl80211_rate_info
+ *	containing info as possible, see &enum nl80211_rate_info
  * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
  *	(u32, from this station)
  * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
@@ -3852,8 +3852,8 @@ enum nl80211_sta_bss_param {
  *	Contains a nested array of signal strength attributes (u8, dBm)
  * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
  *	Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
- * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
- *	802.11 header (u32, kbps)
+ * @NL80211_STA_INFO_EXPECTED_THROUGHPUT: expected throughput considering also
+ *	the 802.11 header (u32, kbps)
  * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
  *	(u64)
  * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
@@ -4039,7 +4039,7 @@ enum nl80211_mpath_flags {
  * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
  * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
  * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
- * 	&enum nl80211_mpath_flags;
+ *	&enum nl80211_mpath_flags;
  * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
  * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
  * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination
@@ -4179,7 +4179,7 @@ enum nl80211_band_attr {
  * @NL80211_WMMR_CW_MAX: Maximum contention window slot.
  * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.
  * @NL80211_WMMR_TXOP: Maximum allowed tx operation time.
- * @nl80211_WMMR_MAX: highest possible wmm rule.
+ * @NL80211_WMMR_MAX: highest possible wmm rule.
  * @__NL80211_WMMR_LAST: Internal use.
  */
 enum nl80211_wmm_rule {
@@ -4201,8 +4201,9 @@ enum nl80211_wmm_rule {
  * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
  *	regulatory domain.
  * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation
- * 	are permitted on this channel, this includes sending probe
- * 	requests, or modes of operation that require beaconing.
+ *	are permitted on this channel, this includes sending probe
+ *	requests, or modes of operation that require beaconing.
+ * @__NL80211_FREQUENCY_ATTR_NO_IBSS: obsolete, same as _NO_IR
  * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
  *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
@@ -4357,16 +4358,16 @@ enum nl80211_bitrate_attr {
 };
 
 /**
- * enum nl80211_initiator - Indicates the initiator of a reg domain request
+ * enum nl80211_reg_initiator - Indicates the initiator of a reg domain request
  * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
- * 	regulatory domain.
+ *	regulatory domain.
  * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
- * 	regulatory domain.
+ *	regulatory domain.
  * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
- * 	wireless core it thinks its knows the regulatory domain we should be in.
+ *	wireless core it thinks its knows the regulatory domain we should be in.
  * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
- * 	802.11 country information element with regulatory information it
- * 	thinks we should consider. cfg80211 only processes the country
+ *	802.11 country information element with regulatory information it
+ *	thinks we should consider. cfg80211 only processes the country
  *	code from the IE, and relies on the regulatory domain information
  *	structure passed by userspace (CRDA) from our wireless-regdb.
  *	If a channel is enabled but the country code indicates it should
@@ -4385,11 +4386,11 @@ enum nl80211_reg_initiator {
  *	to a specific country. When this is set you can count on the
  *	ISO / IEC 3166 alpha2 country code being valid.
  * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
- * 	domain.
+ *	domain.
  * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
- * 	driver specific world regulatory domain. These do not apply system-wide
- * 	and are only applicable to the individual devices which have requested
- * 	them to be applied.
+ *	driver specific world regulatory domain. These do not apply system-wide
+ *	and are only applicable to the individual devices which have requested
+ *	them to be applied.
  * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
  *	of an intersection between two regulatory domains -- the previously
  *	set regulatory domain on the system and the last accepted regulatory
@@ -4406,21 +4407,21 @@ enum nl80211_reg_type {
  * enum nl80211_reg_rule_attr - regulatory rule attributes
  * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
- * 	considerations for a given frequency range. These are the
- * 	&enum nl80211_reg_rule_flags.
+ *	considerations for a given frequency range. These are the
+ *	&enum nl80211_reg_rule_flags.
  * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
- * 	rule in KHz. This is not a center of frequency but an actual regulatory
- * 	band edge.
+ *	rule in KHz. This is not a center of frequency but an actual regulatory
+ *	band edge.
  * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
- * 	in KHz. This is not a center a frequency but an actual regulatory
- * 	band edge.
+ *	in KHz. This is not a center a frequency but an actual regulatory
+ *	band edge.
  * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
  *	frequency range, in KHz.
  * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
- * 	for a given frequency range. The value is in mBi (100 * dBi).
- * 	If you don't have one then don't send this.
+ *	for a given frequency range. The value is in mBi (100 * dBi).
+ *	If you don't have one then don't send this.
  * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
- * 	a given frequency range. The value is in mBm (100 * dBm).
+ *	a given frequency range. The value is in mBm (100 * dBm).
  * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
  *	If not present or 0 default CAC time will be used.
  * @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm).
@@ -4507,8 +4508,9 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
  * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
  * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
- * 	this includes probe requests or modes of operation that require
- * 	beaconing.
+ *	this includes probe requests or modes of operation that require
+ *	beaconing.
+ * @__NL80211_RRF_NO_IBSS: obsolete, same as NO_IR
  * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
  *	base on contiguous rules and wider channels will be allowed to cross
  *	multiple contiguous/overlapping frequency ranges.
@@ -4522,9 +4524,9 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_EHT: EHT operation not allowed
  * @NL80211_RRF_PSD: Ruleset has power spectral density value
  * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for
-	peer-to-peer or adhoc communication under the control of a DFS master
-	which operates on the same channel (FCC-594280 D01 Section B.3).
-	Should be used together with %NL80211_RRF_DFS only.
+ *	peer-to-peer or adhoc communication under the control of a DFS master
+ *	which operates on the same channel (FCC-594280 D01 Section B.3).
+ *	Should be used together with %NL80211_RRF_DFS only.
  * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed
  * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed
  */
@@ -4707,8 +4709,8 @@ enum nl80211_mntr_flags {
  *	alternate between Active and Doze states, but may not wake up
  *	for neighbor's beacons.
  *
- * @__NL80211_MESH_POWER_AFTER_LAST - internal use
- * @NL80211_MESH_POWER_MAX - highest possible power save level
+ * @__NL80211_MESH_POWER_AFTER_LAST: internal use
+ * @NL80211_MESH_POWER_MAX: highest possible power save level
  */
 
 enum nl80211_mesh_power_mode {
@@ -5728,7 +5730,7 @@ struct nl80211_pattern_support {
  *	"TCP connection wakeup" for more details. This is a nested attribute
  *	containing the exact information for establishing and keeping alive
  *	the TCP connection.
- * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH: For wakeup reporting only, the
  *	wakeup packet was received on the TCP connection
  * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
  *	TCP connection was lost or failed to be established
@@ -6077,7 +6079,7 @@ enum nl80211_plink_state {
  * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer
  * @NUM_NL80211_PLINK_ACTIONS: number of possible actions
  */
-enum plink_actions {
+enum nl80211_plink_action {
 	NL80211_PLINK_ACTION_NO_ACTION,
 	NL80211_PLINK_ACTION_OPEN,
 	NL80211_PLINK_ACTION_BLOCK,
@@ -6404,6 +6406,7 @@ enum nl80211_feature_flags {
  *	receiving control port frames over nl80211 instead of the netdevice.
  * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports
  *	(average) ACK signal strength reporting.
+ * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: Backward-compatible ID
  * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
  *      TXQs.
  * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
@@ -6787,6 +6790,8 @@ enum nl80211_acl_policy {
  * @NL80211_SMPS_STATIC: static SMPS (use a single antenna)
  * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and
  *	turn on other antennas after CTS/RTS).
+ * @__NL80211_SMPS_AFTER_LAST: internal
+ * @NL80211_SMPS_MAX: highest used enumeration
  */
 enum nl80211_smps_mode {
 	NL80211_SMPS_OFF,
@@ -7008,6 +7013,8 @@ enum nl80211_bss_select_attr {
  * @NL80211_NAN_FUNC_PUBLISH: function is publish
  * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe
  * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up
+ * @__NL80211_NAN_FUNC_TYPE_AFTER_LAST: internal use
+ * @NL80211_NAN_FUNC_MAX_TYPE: internal use
  */
 enum nl80211_nan_function_type {
 	NL80211_NAN_FUNC_PUBLISH,
@@ -7168,7 +7175,7 @@ enum nl80211_nan_match_attributes {
 };
 
 /**
- * nl80211_external_auth_action - Action to perform with external
+ * enum nl80211_external_auth_action - Action to perform with external
  *     authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
  * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
  * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
@@ -7186,7 +7193,7 @@ enum nl80211_external_auth_action {
  * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element
  *	(9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10),
  *	i.e. starting with the measurement token
- * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element
+ * @NL80211_FTM_RESP_ATTR_CIVICLOC: The content of Measurement Report Element
  *	(9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13),
  *	i.e. starting with the measurement token
  * @__NL80211_FTM_RESP_ATTR_LAST: Internal
@@ -7829,6 +7836,7 @@ enum nl80211_sae_pwe_mechanism {
  *
  * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
  *
+ * @NUM_NL80211_SAR_TYPE: internal
  */
 enum nl80211_sar_type {
 	NL80211_SAR_TYPE_POWER,
@@ -7842,6 +7850,8 @@ enum nl80211_sar_type {
 /**
  * enum nl80211_sar_attrs - Attributes for SAR spec
  *
+ * @__NL80211_SAR_ATTR_INVALID: Invalid
+ *
  * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
  *
  * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
@@ -7873,6 +7883,8 @@ enum nl80211_sar_attrs {
 /**
  * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
  *
+ * @__NL80211_SAR_ATTR_SPECS_INVALID: Invalid
+ *
  * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
  *	power limit value in units of 0.25 dBm if type is
  *	NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h
index ea277039f89d..229fc925ec3a 100644
--- a/include/uapi/linux/pkt_cls.h
+++ b/include/uapi/linux/pkt_cls.h
@@ -587,6 +587,10 @@ enum {
 					 * TCA_FLOWER_KEY_ENC_OPT_GTP_
 					 * attributes
 					 */
+	TCA_FLOWER_KEY_ENC_OPTS_PFCP,	/* Nested
+					 * TCA_FLOWER_KEY_ENC_IPT_PFCP
+					 * attributes
+					 */
 	__TCA_FLOWER_KEY_ENC_OPTS_MAX,
 };
 
@@ -637,6 +641,16 @@ enum {
 		(__TCA_FLOWER_KEY_ENC_OPT_GTP_MAX - 1)
 
 enum {
+	TCA_FLOWER_KEY_ENC_OPT_PFCP_UNSPEC,
+	TCA_FLOWER_KEY_ENC_OPT_PFCP_TYPE,		/* u8 */
+	TCA_FLOWER_KEY_ENC_OPT_PFCP_SEID,		/* be64 */
+	__TCA_FLOWER_KEY_ENC_OPT_PFCP_MAX,
+};
+
+#define TCA_FLOWER_KEY_ENC_OPT_PFCP_MAX \
+		(__TCA_FLOWER_KEY_ENC_OPT_PFCP_MAX - 1)
+
+enum {
 	TCA_FLOWER_KEY_MPLS_OPTS_UNSPEC,
 	TCA_FLOWER_KEY_MPLS_OPTS_LSE,
 	__TCA_FLOWER_KEY_MPLS_OPTS_MAX,
diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h
index a0819c6a5988..adf5fd78dd50 100644
--- a/include/uapi/linux/snmp.h
+++ b/include/uapi/linux/snmp.h
@@ -337,6 +337,8 @@ enum
 	LINUX_MIB_XFRMFWDHDRERROR,		/* XfrmFwdHdrError*/
 	LINUX_MIB_XFRMOUTSTATEINVALID,		/* XfrmOutStateInvalid */
 	LINUX_MIB_XFRMACQUIREERROR,		/* XfrmAcquireError */
+	LINUX_MIB_XFRMOUTSTATEDIRERROR,		/* XfrmOutStateDirError */
+	LINUX_MIB_XFRMINSTATEDIRERROR,		/* XfrmInStateDirError */
 	__LINUX_MIB_XFRMMAX
 };
 
diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h
index c07e9f90c084..dbf896f3146c 100644
--- a/include/uapi/linux/tcp.h
+++ b/include/uapi/linux/tcp.h
@@ -135,6 +135,8 @@ enum {
 #define TCP_AO_GET_KEYS		41	/* List MKT(s) */
 #define TCP_AO_REPAIR		42	/* Get/Set SNEs and ISNs */
 
+#define TCP_IS_MPTCP		43	/* Is MPTCP being used? */
+
 #define TCP_REPAIR_ON		1
 #define TCP_REPAIR_OFF		0
 #define TCP_REPAIR_OFF_NO_WP	-1	/* Turn off without window probes */
diff --git a/include/uapi/linux/udp.h b/include/uapi/linux/udp.h
index 4828794efcf8..1a0fe8b151fb 100644
--- a/include/uapi/linux/udp.h
+++ b/include/uapi/linux/udp.h
@@ -36,7 +36,7 @@ struct udphdr {
 #define UDP_GRO		104	/* This socket can receive UDP GRO packets */
 
 /* UDP encapsulation types */
-#define UDP_ENCAP_ESPINUDP_NON_IKE	1 /* draft-ietf-ipsec-nat-t-ike-00/01 */
+#define UDP_ENCAP_ESPINUDP_NON_IKE	1 /* unused  draft-ietf-ipsec-nat-t-ike-00/01 */
 #define UDP_ENCAP_ESPINUDP	2 /* draft-ietf-ipsec-udp-encaps-06 */
 #define UDP_ENCAP_L2TPINUDP	3 /* rfc2661 */
 #define UDP_ENCAP_GTP0		4 /* GSM TS 09.60 */
diff --git a/include/uapi/linux/virtio_bt.h b/include/uapi/linux/virtio_bt.h
index af798f4c9680..3cc7d633456b 100644
--- a/include/uapi/linux/virtio_bt.h
+++ b/include/uapi/linux/virtio_bt.h
@@ -13,7 +13,6 @@
 
 enum virtio_bt_config_type {
 	VIRTIO_BT_CONFIG_TYPE_PRIMARY	= 0,
-	VIRTIO_BT_CONFIG_TYPE_AMP	= 1,
 };
 
 enum virtio_bt_config_vendor {
diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
index cc65ef0f3c3e..ac9174717ef1 100644
--- a/include/uapi/linux/virtio_net.h
+++ b/include/uapi/linux/virtio_net.h
@@ -56,6 +56,7 @@
 #define VIRTIO_NET_F_MQ	22	/* Device supports Receive Flow
 					 * Steering */
 #define VIRTIO_NET_F_CTRL_MAC_ADDR 23	/* Set MAC address */
+#define VIRTIO_NET_F_DEVICE_STATS 50	/* Device can provide device-level statistics. */
 #define VIRTIO_NET_F_VQ_NOTF_COAL 52	/* Device supports virtqueue notification coalescing */
 #define VIRTIO_NET_F_NOTF_COAL	53	/* Device supports notifications coalescing */
 #define VIRTIO_NET_F_GUEST_USO4	54	/* Guest can handle USOv4 in. */
@@ -406,4 +407,146 @@ struct  virtio_net_ctrl_coal_vq {
 	struct virtio_net_ctrl_coal coal;
 };
 
+/*
+ * Device Statistics
+ */
+#define VIRTIO_NET_CTRL_STATS         8
+#define VIRTIO_NET_CTRL_STATS_QUERY   0
+#define VIRTIO_NET_CTRL_STATS_GET     1
+
+struct virtio_net_stats_capabilities {
+
+#define VIRTIO_NET_STATS_TYPE_CVQ       (1ULL << 32)
+
+#define VIRTIO_NET_STATS_TYPE_RX_BASIC  (1ULL << 0)
+#define VIRTIO_NET_STATS_TYPE_RX_CSUM   (1ULL << 1)
+#define VIRTIO_NET_STATS_TYPE_RX_GSO    (1ULL << 2)
+#define VIRTIO_NET_STATS_TYPE_RX_SPEED  (1ULL << 3)
+
+#define VIRTIO_NET_STATS_TYPE_TX_BASIC  (1ULL << 16)
+#define VIRTIO_NET_STATS_TYPE_TX_CSUM   (1ULL << 17)
+#define VIRTIO_NET_STATS_TYPE_TX_GSO    (1ULL << 18)
+#define VIRTIO_NET_STATS_TYPE_TX_SPEED  (1ULL << 19)
+
+	__le64 supported_stats_types[1];
+};
+
+struct virtio_net_ctrl_queue_stats {
+	struct {
+		__le16 vq_index;
+		__le16 reserved[3];
+		__le64 types_bitmap[1];
+	} stats[1];
+};
+
+struct virtio_net_stats_reply_hdr {
+#define VIRTIO_NET_STATS_TYPE_REPLY_CVQ       32
+
+#define VIRTIO_NET_STATS_TYPE_REPLY_RX_BASIC  0
+#define VIRTIO_NET_STATS_TYPE_REPLY_RX_CSUM   1
+#define VIRTIO_NET_STATS_TYPE_REPLY_RX_GSO    2
+#define VIRTIO_NET_STATS_TYPE_REPLY_RX_SPEED  3
+
+#define VIRTIO_NET_STATS_TYPE_REPLY_TX_BASIC  16
+#define VIRTIO_NET_STATS_TYPE_REPLY_TX_CSUM   17
+#define VIRTIO_NET_STATS_TYPE_REPLY_TX_GSO    18
+#define VIRTIO_NET_STATS_TYPE_REPLY_TX_SPEED  19
+	__u8 type;
+	__u8 reserved;
+	__le16 vq_index;
+	__le16 reserved1;
+	__le16 size;
+};
+
+struct virtio_net_stats_cvq {
+	struct virtio_net_stats_reply_hdr hdr;
+
+	__le64 command_num;
+	__le64 ok_num;
+};
+
+struct virtio_net_stats_rx_basic {
+	struct virtio_net_stats_reply_hdr hdr;
+
+	__le64 rx_notifications;
+
+	__le64 rx_packets;
+	__le64 rx_bytes;
+
+	__le64 rx_interrupts;
+
+	__le64 rx_drops;
+	__le64 rx_drop_overruns;
+};
+
+struct virtio_net_stats_tx_basic {
+	struct virtio_net_stats_reply_hdr hdr;
+
+	__le64 tx_notifications;
+
+	__le64 tx_packets;
+	__le64 tx_bytes;
+
+	__le64 tx_interrupts;
+
+	__le64 tx_drops;
+	__le64 tx_drop_malformed;
+};
+
+struct virtio_net_stats_rx_csum {
+	struct virtio_net_stats_reply_hdr hdr;
+
+	__le64 rx_csum_valid;
+	__le64 rx_needs_csum;
+	__le64 rx_csum_none;
+	__le64 rx_csum_bad;
+};
+
+struct virtio_net_stats_tx_csum {
+	struct virtio_net_stats_reply_hdr hdr;
+
+	__le64 tx_csum_none;
+	__le64 tx_needs_csum;
+};
+
+struct virtio_net_stats_rx_gso {
+	struct virtio_net_stats_reply_hdr hdr;
+
+	__le64 rx_gso_packets;
+	__le64 rx_gso_bytes;
+	__le64 rx_gso_packets_coalesced;
+	__le64 rx_gso_bytes_coalesced;
+};
+
+struct virtio_net_stats_tx_gso {
+	struct virtio_net_stats_reply_hdr hdr;
+
+	__le64 tx_gso_packets;
+	__le64 tx_gso_bytes;
+	__le64 tx_gso_segments;
+	__le64 tx_gso_segments_bytes;
+	__le64 tx_gso_packets_noseg;
+	__le64 tx_gso_bytes_noseg;
+};
+
+struct virtio_net_stats_rx_speed {
+	struct virtio_net_stats_reply_hdr hdr;
+
+	/* rx_{packets,bytes}_allowance_exceeded are too long. So rename to
+	 * short name.
+	 */
+	__le64 rx_ratelimit_packets;
+	__le64 rx_ratelimit_bytes;
+};
+
+struct virtio_net_stats_tx_speed {
+	struct virtio_net_stats_reply_hdr hdr;
+
+	/* tx_{packets,bytes}_allowance_exceeded are too long. So rename to
+	 * short name.
+	 */
+	__le64 tx_ratelimit_packets;
+	__le64 tx_ratelimit_bytes;
+};
+
 #endif /* _UAPI_LINUX_VIRTIO_NET_H */
diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h
index 594b66e16395..d950d02ab791 100644
--- a/include/uapi/linux/xfrm.h
+++ b/include/uapi/linux/xfrm.h
@@ -141,6 +141,11 @@ enum {
 	XFRM_POLICY_MAX	= 3
 };
 
+enum xfrm_sa_dir {
+	XFRM_SA_DIR_IN	= 1,
+	XFRM_SA_DIR_OUT = 2
+};
+
 enum {
 	XFRM_SHARE_ANY,		/* No limitations */
 	XFRM_SHARE_SESSION,	/* For this session only */
@@ -315,6 +320,7 @@ enum xfrm_attr_type_t {
 	XFRMA_SET_MARK_MASK,	/* __u32 */
 	XFRMA_IF_ID,		/* __u32 */
 	XFRMA_MTIMER_THRESH,	/* __u32 in seconds for input SA */
+	XFRMA_SA_DIR,		/* __u8 */
 	__XFRMA_MAX
 
 #define XFRMA_OUTPUT_MARK XFRMA_SET_MARK	/* Compatibility */