Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

1 files changed, 52 insertions, 21 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 45ad37adbe32..0a04eaf5343c 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -250,6 +250,7 @@ struct ieee80211_chan_req {
  * @min_def: the minimum channel definition currently required.
  * @ap: the channel definition the AP actually is operating as,
  *	for use with (wider bandwidth) OFDMA
+ * @radio_idx: index of the wiphy radio used used for this channel
  * @rx_chains_static: The number of RX chains that must always be
  *	active on the channel to receive MIMO transmissions
  * @rx_chains_dynamic: The number of RX chains that must be enabled
@@ -264,6 +265,7 @@ struct ieee80211_chanctx_conf {
 	struct cfg80211_chan_def min_def;
 	struct cfg80211_chan_def ap;
 
+	int radio_idx;
 	u8 rx_chains_static, rx_chains_dynamic;
 
 	bool radar_enabled;
@@ -362,6 +364,7 @@ struct ieee80211_vif_chanctx_switch {
  *	status changed.
  * @BSS_CHANGED_MLD_VALID_LINKS: MLD valid links status changed.
  * @BSS_CHANGED_MLD_TTLM: negotiated TID to link mapping was changed
+ * @BSS_CHANGED_TPE: transmit power envelope changed
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
@@ -398,6 +401,7 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_UNSOL_BCAST_PROBE_RESP = BIT_ULL(31),
 	BSS_CHANGED_MLD_VALID_LINKS	= BIT_ULL(33),
 	BSS_CHANGED_MLD_TTLM		= BIT_ULL(34),
+	BSS_CHANGED_TPE			= BIT_ULL(35),
 
 	/* when adding here, make sure to change ieee80211_reconfig */
 };
@@ -550,6 +554,39 @@ struct ieee80211_fils_discovery {
 	u32 max_interval;
 };
 
+#define IEEE80211_TPE_EIRP_ENTRIES_320MHZ	5
+struct ieee80211_parsed_tpe_eirp {
+	bool valid;
+	s8 power[IEEE80211_TPE_EIRP_ENTRIES_320MHZ];
+	u8 count;
+};
+
+#define IEEE80211_TPE_PSD_ENTRIES_320MHZ	16
+struct ieee80211_parsed_tpe_psd {
+	bool valid;
+	s8 power[IEEE80211_TPE_PSD_ENTRIES_320MHZ];
+	u8 count, n;
+};
+
+/**
+ * struct ieee80211_parsed_tpe - parsed transmit power envelope information
+ * @max_local: maximum local EIRP, one value for 20, 40, 80, 160, 320 MHz each
+ *	(indexed by TX power category)
+ * @max_reg_client: maximum regulatory client EIRP, one value for 20, 40, 80,
+ *	160, 320 MHz each
+ *	(indexed by TX power category)
+ * @psd_local: maximum local power spectral density, one value for each 20 MHz
+ *	subchannel per bss_conf's chanreq.oper
+ *	(indexed by TX power category)
+ * @psd_reg_client: maximum regulatory power spectral density, one value for
+ *	each 20 MHz subchannel per bss_conf's chanreq.oper
+ *	(indexed by TX power category)
+ */
+struct ieee80211_parsed_tpe {
+	struct ieee80211_parsed_tpe_eirp max_local[2], max_reg_client[2];
+	struct ieee80211_parsed_tpe_psd psd_local[2], psd_reg_client[2];
+};
+
 /**
  * struct ieee80211_bss_conf - holds the BSS's changing parameters
  *
@@ -662,8 +699,7 @@ struct ieee80211_fils_discovery {
  * @beacon_tx_rate: The configured beacon transmit rate that needs to be passed
  *	to driver when rate control is offloaded to firmware.
  * @power_type: power type of BSS for 6 GHz
- * @tx_pwr_env: transmit power envelope array of BSS.
- * @tx_pwr_env_num: number of @tx_pwr_env.
+ * @tpe: transmit power envelope information
  * @pwr_reduction: power constraint of BSS.
  * @eht_support: does this BSS support EHT
  * @csa_active: marks whether a channel switch is going on.
@@ -701,6 +737,9 @@ struct ieee80211_fils_discovery {
  *	beamformee
  * @eht_mu_beamformer: in AP-mode, does this BSS enable operation as an EHT MU
  *	beamformer
+ * @eht_80mhz_full_bw_ul_mumimo: in AP-mode, does this BSS support the
+ *	reception of an EHT TB PPDU on an RU that spans the entire PPDU
+ *	bandwidth
  */
 struct ieee80211_bss_conf {
 	struct ieee80211_vif *vif;
@@ -766,8 +805,9 @@ struct ieee80211_bss_conf {
 	u32 unsol_bcast_probe_resp_interval;
 	struct cfg80211_bitrate_mask beacon_tx_rate;
 	enum ieee80211_ap_reg_power power_type;
-	struct ieee80211_tx_pwr_env tx_pwr_env[IEEE80211_TPE_MAX_IE_COUNT];
-	u8 tx_pwr_env_num;
+
+	struct ieee80211_parsed_tpe tpe;
+
 	u8 pwr_reduction;
 	bool eht_support;
 
@@ -793,6 +833,7 @@ struct ieee80211_bss_conf {
 	bool eht_su_beamformer;
 	bool eht_su_beamformee;
 	bool eht_mu_beamformer;
+	bool eht_80mhz_full_bw_ul_mumimo;
 };
 
 /**
@@ -2728,14 +2769,6 @@ struct ieee80211_txq {
  * @IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA: Hardware supports buffer STA on
  *	TDLS links.
  *
- * @IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP: The driver requires the
- *	mgd_prepare_tx() callback to be called before transmission of a
- *	deauthentication frame in case the association was completed but no
- *	beacon was heard. This is required in multi-channel scenarios, where the
- *	virtual interface might not be given air time for the transmission of
- *	the frame, as it is not synced with the AP/P2P GO yet, and thus the
- *	deauthentication frame might not be transmitted.
- *
  * @IEEE80211_HW_DOESNT_SUPPORT_QOS_NDP: The driver (or firmware) doesn't
  *	support QoS NDP for AP probing - that's most likely a driver bug.
  *
@@ -2835,7 +2868,6 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_REPORTS_LOW_ACK,
 	IEEE80211_HW_SUPPORTS_TX_FRAG,
 	IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA,
-	IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP,
 	IEEE80211_HW_DOESNT_SUPPORT_QOS_NDP,
 	IEEE80211_HW_BUFF_MMPDU_TXQ,
 	IEEE80211_HW_SUPPORTS_VHT_EXT_NSS_BW,
@@ -3748,13 +3780,15 @@ enum ieee80211_reconfig_type {
  * @success: whether the frame exchange was successful, only
  *	used with the mgd_complete_tx() method, and then only
  *	valid for auth and (re)assoc.
+ * @was_assoc: set if this call is due to deauth/disassoc
+ *	while just having been associated
  * @link_id: the link id on which the frame will be TX'ed.
  *	Only used with the mgd_prepare_tx() method.
  */
 struct ieee80211_prep_tx_info {
 	u16 duration;
 	u16 subtype;
-	u8 success:1;
+	u8 success:1, was_assoc:1;
 	int link_id;
 };
 
@@ -4203,12 +4237,9 @@ struct ieee80211_prep_tx_info {
  *	yet it need not necessarily be given airtime, in particular since any
  *	transmission to a P2P GO needs to be synchronized against the GO's
  *	powersave state. mac80211 will call this function before transmitting a
- *	management frame prior to having successfully associated to allow the
- *	driver to give it channel time for the transmission, to get a response
- *	and to be able to synchronize with the GO.
- *	For drivers that set %IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP, mac80211
- *	would also call this function before transmitting a deauthentication
- *	frame in case that no beacon was heard from the AP/P2P GO.
+ *	management frame prior to transmitting that frame to allow the driver
+ *	to give it channel time for the transmission, to get a response and be
+ *	able to synchronize with the GO.
  *	The callback will be called before each transmission and upon return
  *	mac80211 will transmit the frame right away.
  *	Additional information is passed in the &struct ieee80211_prep_tx_info
@@ -4405,7 +4436,7 @@ struct ieee80211_ops {
 		   struct ieee80211_tx_control *control,
 		   struct sk_buff *skb);
 	int (*start)(struct ieee80211_hw *hw);
-	void (*stop)(struct ieee80211_hw *hw);
+	void (*stop)(struct ieee80211_hw *hw, bool suspend);
 #ifdef CONFIG_PM
 	int (*suspend)(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan);
 	int (*resume)(struct ieee80211_hw *hw);