Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

1 files changed, 51 insertions, 0 deletions

diff --git a/include/linux/pse-pd/pse.h b/include/linux/pse-pd/pse.h
index 6eec24ffa866..591a53e082e6 100644
--- a/include/linux/pse-pd/pse.h
+++ b/include/linux/pse-pd/pse.h
@@ -9,6 +9,9 @@
 #include <linux/list.h>
 #include <uapi/linux/ethtool.h>
 
+/* Maximum current in uA according to IEEE 802.3-2022 Table 145-1 */
+#define MAX_PI_CURRENT 1920000
+
 struct phy_device;
 struct pse_controller_dev;
 
@@ -36,12 +39,29 @@ struct pse_control_config {
  *	functions. IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState
  * @c33_pw_status: power detection status of the PSE.
  *	IEEE 802.3-2022 30.9.1.1.5 aPSEPowerDetectionStatus:
+ * @c33_pw_class: detected class of a powered PD
+ *	IEEE 802.3-2022 30.9.1.1.8 aPSEPowerClassification
+ * @c33_actual_pw: power currently delivered by the PSE in mW
+ *	IEEE 802.3-2022 30.9.1.1.23 aPSEActualPower
+ * @c33_ext_state_info: extended state information of the PSE
+ * @c33_avail_pw_limit: available power limit of the PSE in mW
+ *	IEEE 802.3-2022 145.2.5.4 pse_avail_pwr
+ * @c33_pw_limit_ranges: supported power limit configuration range. The driver
+ *	is in charge of the memory allocation.
+ * @c33_pw_limit_nb_ranges: number of supported power limit configuration
+ *	ranges
  */
 struct pse_control_status {
 	enum ethtool_podl_pse_admin_state podl_admin_state;
 	enum ethtool_podl_pse_pw_d_status podl_pw_status;
 	enum ethtool_c33_pse_admin_state c33_admin_state;
 	enum ethtool_c33_pse_pw_d_status c33_pw_status;
+	u32 c33_pw_class;
+	u32 c33_actual_pw;
+	struct ethtool_c33_pse_ext_state_info c33_ext_state_info;
+	u32 c33_avail_pw_limit;
+	struct ethtool_c33_pse_pw_limit_range *c33_pw_limit_ranges;
+	u32 c33_pw_limit_nb_ranges;
 };
 
 /**
@@ -53,6 +73,14 @@ struct pse_control_status {
  *		   May also return negative errno.
  * @pi_enable: Configure the PSE PI as enabled.
  * @pi_disable: Configure the PSE PI as disabled.
+ * @pi_get_voltage: Return voltage similarly to get_voltage regulator
+ *		    callback.
+ * @pi_get_current_limit: Get the configured current limit similarly to
+ *			  get_current_limit regulator callback.
+ * @pi_set_current_limit: Configure the current limit similarly to
+ *			  set_current_limit regulator callback.
+ *			  Should not return an error in case of MAX_PI_CURRENT
+ *			  current value set.
  */
 struct pse_controller_ops {
 	int (*ethtool_get_status)(struct pse_controller_dev *pcdev,
@@ -62,6 +90,11 @@ struct pse_controller_ops {
 	int (*pi_is_enabled)(struct pse_controller_dev *pcdev, int id);
 	int (*pi_enable)(struct pse_controller_dev *pcdev, int id);
 	int (*pi_disable)(struct pse_controller_dev *pcdev, int id);
+	int (*pi_get_voltage)(struct pse_controller_dev *pcdev, int id);
+	int (*pi_get_current_limit)(struct pse_controller_dev *pcdev,
+				    int id);
+	int (*pi_set_current_limit)(struct pse_controller_dev *pcdev,
+				    int id, int max_uA);
 };
 
 struct module;
@@ -148,6 +181,11 @@ int pse_ethtool_get_status(struct pse_control *psec,
 int pse_ethtool_set_config(struct pse_control *psec,
 			   struct netlink_ext_ack *extack,
 			   const struct pse_control_config *config);
+int pse_ethtool_set_pw_limit(struct pse_control *psec,
+			     struct netlink_ext_ack *extack,
+			     const unsigned int pw_limit);
+int pse_ethtool_get_pw_limit(struct pse_control *psec,
+			     struct netlink_ext_ack *extack);
 
 bool pse_has_podl(struct pse_control *psec);
 bool pse_has_c33(struct pse_control *psec);
@@ -177,6 +215,19 @@ static inline int pse_ethtool_set_config(struct pse_control *psec,
 	return -EOPNOTSUPP;
 }
 
+static inline int pse_ethtool_set_pw_limit(struct pse_control *psec,
+					   struct netlink_ext_ack *extack,
+					   const unsigned int pw_limit)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int pse_ethtool_get_pw_limit(struct pse_control *psec,
+					   struct netlink_ext_ack *extack)
+{
+	return -EOPNOTSUPP;
+}
+
 static inline bool pse_has_podl(struct pse_control *psec)
 {
 	return false;