power: supply: PCHG: Peripheral device charger

This patch adds a driver for PCHG (Peripheral CHarGer). PCHG is a
framework managing power supplies for peripheral devices.

This driver creates a sysfs node for each peripheral charge port:

	/sys/class/power_supply/peripheral<n>

where <n> is the index of a charge port.

For example, when a stylus is connected to a NFC/WLC port, the node
returns:

	/sys/class/power_supply/peripheral0/
		capacity=50
		charge_type=Standard
		scope=Device
		status=Charging
		type=Battery

Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

1 files changed, 67 insertions, 0 deletions

diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
index 45f53afc46e2..271bd87bff0a 100644
--- a/include/linux/platform_data/cros_ec_commands.h
+++ b/include/linux/platform_data/cros_ec_commands.h
@@ -4228,6 +4228,7 @@ enum ec_device_event {
 	EC_DEVICE_EVENT_TRACKPAD,
 	EC_DEVICE_EVENT_DSP,
 	EC_DEVICE_EVENT_WIFI,
+	EC_DEVICE_EVENT_WLC,
 };
 
 enum ec_device_event_param {
@@ -5460,6 +5461,72 @@ struct ec_response_rollback_info {
 /* Issue AP reset */
 #define EC_CMD_AP_RESET 0x0125
 
+/**
+ * Get the number of peripheral charge ports
+ */
+#define EC_CMD_PCHG_COUNT 0x0134
+
+#define EC_PCHG_MAX_PORTS 8
+
+struct ec_response_pchg_count {
+	uint8_t port_count;
+} __ec_align1;
+
+/**
+ * Get the status of a peripheral charge port
+ */
+#define EC_CMD_PCHG 0x0135
+
+struct ec_params_pchg {
+	uint8_t port;
+} __ec_align1;
+
+struct ec_response_pchg {
+	uint32_t error;			/* enum pchg_error */
+	uint8_t state;			/* enum pchg_state state */
+	uint8_t battery_percentage;
+	uint8_t unused0;
+	uint8_t unused1;
+	/* Fields added in version 1 */
+	uint32_t fw_version;
+	uint32_t dropped_event_count;
+} __ec_align2;
+
+enum pchg_state {
+	/* Charger is reset and not initialized. */
+	PCHG_STATE_RESET = 0,
+	/* Charger is initialized or disabled. */
+	PCHG_STATE_INITIALIZED,
+	/* Charger is enabled and ready to detect a device. */
+	PCHG_STATE_ENABLED,
+	/* Device is in proximity. */
+	PCHG_STATE_DETECTED,
+	/* Device is being charged. */
+	PCHG_STATE_CHARGING,
+	/* Device is fully charged. It implies DETECTED (& not charging). */
+	PCHG_STATE_FULL,
+	/* In download (a.k.a. firmware update) mode */
+	PCHG_STATE_DOWNLOAD,
+	/* In download mode. Ready for receiving data. */
+	PCHG_STATE_DOWNLOADING,
+	/* Device is ready for data communication. */
+	PCHG_STATE_CONNECTED,
+	/* Put no more entry below */
+	PCHG_STATE_COUNT,
+};
+
+#define EC_PCHG_STATE_TEXT { \
+	[PCHG_STATE_RESET] = "RESET", \
+	[PCHG_STATE_INITIALIZED] = "INITIALIZED", \
+	[PCHG_STATE_ENABLED] = "ENABLED", \
+	[PCHG_STATE_DETECTED] = "DETECTED", \
+	[PCHG_STATE_CHARGING] = "CHARGING", \
+	[PCHG_STATE_FULL] = "FULL", \
+	[PCHG_STATE_DOWNLOAD] = "DOWNLOAD", \
+	[PCHG_STATE_DOWNLOADING] = "DOWNLOADING", \
+	[PCHG_STATE_CONNECTED] = "CONNECTED", \
+	}
+
 /*****************************************************************************/
 /* Voltage regulator controls */