diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2023-04-30 11:35:05 +0200 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2023-05-24 15:01:22 +0200 |
| commit | c32c81f3dbdfd68f6ab20a29ad86f811aed36e4e (patch) | |
| tree | 4b2b457ce25735fcc465c956a022c903b3daf424 /drivers | |
| parent | ac9a78681b921877518763ba0e89202254349d1b (diff) | |
ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
Aaro reports problems on the OSK1 board after we altered
the dynamic base for GPIO allocations.
It appears this happens because the OMAP driver now
allocates GPIO numbers dynamically, so all that is
references by number is a bit up in the air.
Let's bite the bullet and try to just move the gpio_chip
in the tps65010 MFD driver over to using dynamic allocations.
Alter everything in the OSK1 board file to use a GPIO
descriptor table and lookups.
Utilize the NULL device to define some board-specific
GPIO lookups and use these to immediately look up the
same GPIOs, convert to IRQ numbers and pass as resources
to the devices. This is ugly but should work.
The .setup() callback for tps65010 was used for some GPIO
hogging, but since the OSK1 is the only user in the entire
kernel we can alter the signatures to something that
is helpful and make a clean transition.
Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base")
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: andy.shevchenko@gmail.com
Cc: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mfd/tps65010.c | 14 |
1 files changed, 5 insertions, 9 deletions
diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c index fb733288cca3..faea4ff44c6f 100644 --- a/drivers/mfd/tps65010.c +++ b/drivers/mfd/tps65010.c @@ -506,12 +506,8 @@ static void tps65010_remove(struct i2c_client *client) struct tps65010 *tps = i2c_get_clientdata(client); struct tps65010_board *board = dev_get_platdata(&client->dev); - if (board && board->teardown) { - int status = board->teardown(client, board->context); - if (status < 0) - dev_dbg(&client->dev, "board %s %s err %d\n", - "teardown", client->name, status); - } + if (board && board->teardown) + board->teardown(client, &tps->chip); if (client->irq > 0) free_irq(client->irq, tps); cancel_delayed_work_sync(&tps->work); @@ -619,7 +615,7 @@ static int tps65010_probe(struct i2c_client *client) tps, DEBUG_FOPS); /* optionally register GPIOs */ - if (board && board->base != 0) { + if (board) { tps->outmask = board->outmask; tps->chip.label = client->name; @@ -632,7 +628,7 @@ static int tps65010_probe(struct i2c_client *client) /* NOTE: only partial support for inputs; nyet IRQs */ tps->chip.get = tps65010_gpio_get; - tps->chip.base = board->base; + tps->chip.base = -1; tps->chip.ngpio = 7; tps->chip.can_sleep = 1; @@ -641,7 +637,7 @@ static int tps65010_probe(struct i2c_client *client) dev_err(&client->dev, "can't add gpiochip, err %d\n", status); else if (board->setup) { - status = board->setup(client, board->context); + status = board->setup(client, &tps->chip); if (status < 0) { dev_dbg(&client->dev, "board %s %s err %d\n", |