USB: Add MUSB and TUSB support

This patch adds support for MUSB and TUSB controllers
integrated into omap2430 and davinci. It also adds support
for external tusb6010 controller.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

28 files changed, 15688 insertions, 0 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index a280ab3d0833..2735bde73475 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe/
 obj-$(CONFIG_PARIDE) 		+= block/paride/
 obj-$(CONFIG_TC)		+= tc/
 obj-$(CONFIG_USB)		+= usb/
+obj-$(CONFIG_USB_MUSB_HDRC)	+= usb/musb/
 obj-$(CONFIG_PCI)		+= usb/
 obj-$(CONFIG_USB_GADGET)	+= usb/gadget/
 obj-$(CONFIG_SERIO)		+= input/serio/
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 4f9b5ecfb721..bcefbddeba50 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -99,6 +99,8 @@ source "drivers/usb/mon/Kconfig"
 
 source "drivers/usb/host/Kconfig"
 
+source "drivers/usb/musb/Kconfig"
+
 source "drivers/usb/class/Kconfig"
 
 source "drivers/usb/storage/Kconfig"
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index c6a8c6b1116a..acc95b2ac6f8 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -284,6 +284,16 @@ config USB_LH7A40X
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+# built in ../musb along with host support
+config USB_GADGET_MUSB_HDRC
+	boolean "Inventra HDRC USB Peripheral (TI, ...)"
+	depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
+	select USB_GADGET_DUALSPEED
+	select USB_GADGET_SELECTED
+	help
+	  This OTG-capable silicon IP is used in dual designs including
+	  the TI DaVinci, OMAP 243x, OMAP 343x, and TUSB 6010.
+
 config USB_GADGET_OMAP
 	boolean "OMAP USB Device Controller"
 	depends on ARCH_OMAP
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
new file mode 100644
index 000000000000..faca4333f27a
--- /dev/null
+++ b/drivers/usb/musb/Kconfig
@@ -0,0 +1,176 @@
+#
+# USB Dual Role (OTG-ready) Controller Drivers
+# for silicon based on Mentor Graphics INVENTRA designs
+#
+
+comment "Enable Host or Gadget support to see Inventra options"
+	depends on !USB && USB_GADGET=n
+
+# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
+config USB_MUSB_HDRC
+	depends on (USB || USB_GADGET) && HAVE_CLK
+	select TWL4030_USB if MACH_OMAP_3430SDP
+	tristate 'Inventra Highspeed Dual Role Controller (TI, ...)'
+	help
+	  Say Y here if your system has a dual role high speed USB
+	  controller based on the Mentor Graphics silicon IP.  Then
+	  configure options to match your silicon and the board
+	  it's being used with, including the USB peripheral role,
+	  or the USB host role, or both.
+
+	  Texas Instruments parts using this IP include DaVinci 644x,
+	  OMAP 243x, OMAP 343x, and TUSB 6010.
+
+	  If you do not know what this is, please say N.
+
+	  To compile this driver as a module, choose M here; the
+	  module will be called "musb_hdrc".
+
+config USB_MUSB_SOC
+	boolean
+	depends on USB_MUSB_HDRC
+	default y if ARCH_DAVINCI
+	default y if ARCH_OMAP2430
+	default y if ARCH_OMAP34XX
+	help
+	  Use a static <asm/arch/hdrc_cnf.h> file to describe how the
+	  controller is configured (endpoints, mechanisms, etc) on the
+	  current iteration of a given system-on-chip.
+
+comment "DaVinci 644x USB support"
+	depends on USB_MUSB_HDRC && ARCH_DAVINCI
+
+comment "OMAP 243x high speed USB support"
+	depends on USB_MUSB_HDRC && ARCH_OMAP2430
+
+comment "OMAP 343x high speed USB support"
+	depends on USB_MUSB_HDRC && ARCH_OMAP34XX
+
+config USB_TUSB6010
+	boolean "TUSB 6010 support"
+	depends on USB_MUSB_HDRC && !USB_MUSB_SOC
+	default y
+	help
+	  The TUSB 6010 chip, from Texas Instruments, connects a discrete
+	  HDRC core using a 16-bit parallel bus (NOR flash style) or VLYNQ
+	  (a high speed serial link).  It can use system-specific external
+	  DMA controllers.
+
+choice
+	prompt "Driver Mode"
+	depends on USB_MUSB_HDRC
+	help
+	  Dual-Role devices can support both host and peripheral roles,
+	  as well as a the special "OTG Device" role which can switch
+	  between both roles as needed.
+
+# use USB_MUSB_HDRC_HCD not USB_MUSB_HOST to #ifdef host side support;
+# OTG needs both roles, not just USB_MUSB_HOST.
+config USB_MUSB_HOST
+	depends on USB
+	bool "USB Host"
+	help
+	  Say Y here if your system supports the USB host role.
+	  If it has a USB "A" (rectangular), "Mini-A" (uncommon),
+	  or "Mini-AB" connector, it supports the host role.
+	  (With a "Mini-AB" connector, you should enable USB OTG.)
+
+# use USB_GADGET_MUSB_HDRC not USB_MUSB_PERIPHERAL to #ifdef peripheral
+# side support ... OTG needs both roles
+config USB_MUSB_PERIPHERAL
+	depends on USB_GADGET
+	bool "USB Peripheral (gadget stack)"
+	select USB_GADGET_MUSB_HDRC
+	help
+	  Say Y here if your system supports the USB peripheral role.
+	  If it has a USB "B" (squarish), "Mini-B", or "Mini-AB"
+	  connector, it supports the peripheral role.
+	  (With a "Mini-AB" connector, you should enable USB OTG.)
+
+config USB_MUSB_OTG
+	depends on USB && USB_GADGET && PM && EXPERIMENTAL
+	bool "Both host and peripheral:  USB OTG (On The Go) Device"
+	select USB_GADGET_MUSB_HDRC
+	select USB_OTG
+	help
+	   The most notable feature of USB OTG is support for a
+	   "Dual-Role" device, which can act as either a device
+	   or a host.  The initial role choice can be changed
+	   later, when two dual-role devices talk to each other.
+
+	   At this writing, the OTG support in this driver is incomplete,
+	   omitting the mandatory HNP or SRP protocols.  However, some
+	   of the cable based role switching works.  (That is, grounding
+	   the ID pin switches the controller to host mode, while leaving
+	   it floating leaves it in peripheral mode.)
+
+	   Select this if your system has a Mini-AB connector, or
+	   to simplify certain kinds of configuration.
+
+	   To implement your OTG Targeted Peripherals List (TPL), enable
+	   USB_OTG_WHITELIST and update "drivers/usb/core/otg_whitelist.h"
+	   to match your requirements.
+
+endchoice
+
+# enable peripheral support (including with OTG)
+config USB_GADGET_MUSB_HDRC
+	bool
+	depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
+#	default y
+#	select USB_GADGET_DUALSPEED
+#	select USB_GADGET_SELECTED
+
+# enables host support (including with OTG)
+config USB_MUSB_HDRC_HCD
+	bool
+	depends on USB_MUSB_HDRC && (USB_MUSB_HOST || USB_MUSB_OTG)
+	select USB_OTG if USB_GADGET_MUSB_HDRC
+	default y
+
+
+config MUSB_PIO_ONLY
+	bool 'Disable DMA (always use PIO)'
+	depends on USB_MUSB_HDRC
+	default y if USB_TUSB6010
+	help
+	  All data is copied between memory and FIFO by the CPU.
+	  DMA controllers are ignored.
+
+	  Do not select 'n' here unless DMA support for your SOC or board
+	  is unavailable (or unstable).  When DMA is enabled at compile time,
+	  you can still disable it at run time using the "use_dma=n" module
+	  parameter.
+
+config USB_INVENTRA_DMA
+	bool
+	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+	default ARCH_OMAP2430 || ARCH_OMAP34XX
+	help
+	  Enable DMA transfers using Mentor's engine.
+
+config USB_TI_CPPI_DMA
+	bool
+	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+	default ARCH_DAVINCI
+	help
+	  Enable DMA transfers when TI CPPI DMA is available.
+
+config USB_TUSB_OMAP_DMA
+	bool
+	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+	depends on USB_TUSB6010
+	depends on ARCH_OMAP
+	default y
+	help
+	  Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
+
+config	USB_MUSB_LOGLEVEL
+	depends on USB_MUSB_HDRC
+	int  'Logging Level (0 - none / 3 - annoying / ... )'
+	default 0
+	help
+	  Set the logging level. 0 disables the debugging altogether,
+	  although when USB_DEBUG is set the value is at least 1.
+	  Starting at level 3, per-transfer (urb, usb_request, packet,
+	  or dma transfer) tracing may kick in.
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
new file mode 100644
index 000000000000..88eb67de08ae
--- /dev/null
+++ b/drivers/usb/musb/Makefile
@@ -0,0 +1,86 @@
+#
+# for USB OTG silicon based on Mentor Graphics INVENTRA designs
+#
+
+musb_hdrc-objs := musb_core.o
+
+obj-$(CONFIG_USB_MUSB_HDRC)	+= musb_hdrc.o
+
+ifeq ($(CONFIG_ARCH_DAVINCI),y)
+	musb_hdrc-objs	+= davinci.o
+endif
+
+ifeq ($(CONFIG_USB_TUSB6010),y)
+	musb_hdrc-objs	+= tusb6010.o
+endif
+
+ifeq ($(CONFIG_ARCH_OMAP2430),y)
+	musb_hdrc-objs	+= omap2430.o
+endif
+
+ifeq ($(CONFIG_ARCH_OMAP3430),y)
+	musb_hdrc-objs	+= omap2430.o
+endif
+
+ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
+	musb_hdrc-objs		+= musb_gadget_ep0.o musb_gadget.o
+endif
+
+ifeq ($(CONFIG_USB_MUSB_HDRC_HCD),y)
+	musb_hdrc-objs		+= musb_virthub.o musb_host.o
+endif
+
+# the kconfig must guarantee that only one of the
+# possible I/O schemes will be enabled at a time ...
+# PIO only, or DMA (several potential schemes).
+# though PIO is always there to back up DMA, and for ep0
+
+ifneq ($(CONFIG_MUSB_PIO_ONLY),y)
+
+  ifeq ($(CONFIG_USB_INVENTRA_DMA),y)
+    musb_hdrc-objs		+= musbhsdma.o
+
+  else
+    ifeq ($(CONFIG_USB_TI_CPPI_DMA),y)
+      musb_hdrc-objs		+= cppi_dma.o
+
+    else
+      ifeq ($(CONFIG_USB_TUSB_OMAP_DMA),y)
+        musb_hdrc-objs		+= tusb6010_omap.o
+
+      endif
+    endif
+  endif
+endif
+
+
+################################################################################
+
+# FIXME remove all these extra "-DMUSB_* things, stick to CONFIG_*
+
+ifeq ($(CONFIG_USB_INVENTRA_MUSB_HAS_AHB_ID),y)
+	EXTRA_CFLAGS += -DMUSB_AHB_ID
+endif
+
+# Debugging
+
+MUSB_DEBUG:=$(CONFIG_USB_MUSB_LOGLEVEL)
+
+ifeq ("$(strip $(MUSB_DEBUG))","")
+    ifdef CONFIG_USB_DEBUG
+	MUSB_DEBUG:=1
+    else
+	MUSB_DEBUG:=0
+    endif
+endif
+
+ifneq ($(MUSB_DEBUG),0)
+    EXTRA_CFLAGS += -DDEBUG
+
+    ifeq ($(CONFIG_PROC_FS),y)
+	musb_hdrc-objs		+= musb_procfs.o
+    endif
+
+endif
+
+EXTRA_CFLAGS += -DMUSB_DEBUG=$(MUSB_DEBUG)
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
new file mode 100644
index 000000000000..5ad6d0893cbe
--- /dev/null
+++ b/drivers/usb/musb/cppi_dma.c
@@ -0,0 +1,1540 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * This file implements a DMA  interface using TI's CPPI DMA.
+ * For now it's DaVinci-only, but CPPI isn't specific to DaVinci or USB.
+ * The TUSB6020, using VLYNQ, has CPPI that looks much like DaVinci.
+ */
+
+#include <linux/usb.h>
+
+#include "musb_core.h"
+#include "cppi_dma.h"
+
+
+/* CPPI DMA status 7-mar-2006:
+ *
+ * - See musb_{host,gadget}.c for more info
+ *
+ * - Correct RX DMA generally forces the engine into irq-per-packet mode,
+ *   which can easily saturate the CPU under non-mass-storage loads.
+ *
+ * NOTES 24-aug-2006 (2.6.18-rc4):
+ *
+ * - peripheral RXDMA wedged in a test with packets of length 512/512/1.
+ *   evidently after the 1 byte packet was received and acked, the queue
+ *   of BDs got garbaged so it wouldn't empty the fifo.  (rxcsr 0x2003,
+ *   and RX DMA0: 4 left, 80000000 8feff880, 8feff860 8feff860; 8f321401
+ *   004001ff 00000001 .. 8feff860)  Host was just getting NAKed on tx
+ *   of its next (512 byte) packet.  IRQ issues?
+ *
+ * REVISIT:  the "transfer DMA" glue between CPPI and USB fifos will
+ * evidently also directly update the RX and TX CSRs ... so audit all
+ * host and peripheral side DMA code to avoid CSR access after DMA has
+ * been started.
+ */
+
+/* REVISIT now we can avoid preallocating these descriptors; or
+ * more simply, switch to a global freelist not per-channel ones.
+ * Note: at full speed, 64 descriptors == 4K bulk data.
+ */
+#define NUM_TXCHAN_BD       64
+#define NUM_RXCHAN_BD       64
+
+static inline void cpu_drain_writebuffer(void)
+{
+	wmb();
+#ifdef	CONFIG_CPU_ARM926T
+	/* REVISIT this "should not be needed",
+	 * but lack of it sure seemed to hurt ...
+	 */
+	asm("mcr p15, 0, r0, c7, c10, 4 @ drain write buffer\n");
+#endif
+}
+
+static inline struct cppi_descriptor *cppi_bd_alloc(struct cppi_channel *c)
+{
+	struct cppi_descriptor	*bd = c->freelist;
+
+	if (bd)
+		c->freelist = bd->next;
+	return bd;
+}
+
+static inline void
+cppi_bd_free(struct cppi_channel *c, struct cppi_descriptor *bd)
+{
+	if (!bd)
+		return;
+	bd->next = c->freelist;
+	c->freelist = bd;
+}
+
+/*
+ *  Start DMA controller
+ *
+ *  Initialize the DMA controller as necessary.
+ */
+
+/* zero out entire rx state RAM entry for the channel */
+static void cppi_reset_rx(struct cppi_rx_stateram __iomem *rx)
+{
+	musb_writel(&rx->rx_skipbytes, 0, 0);
+	musb_writel(&rx->rx_head, 0, 0);
+	musb_writel(&rx->rx_sop, 0, 0);
+	musb_writel(&rx->rx_current, 0, 0);
+	musb_writel(&rx->rx_buf_current, 0, 0);
+	musb_writel(&rx->rx_len_len, 0, 0);
+	musb_writel(&rx->rx_cnt_cnt, 0, 0);
+}
+
+/* zero out entire tx state RAM entry for the channel */
+static void cppi_reset_tx(struct cppi_tx_stateram __iomem *tx, u32 ptr)
+{
+	musb_writel(&tx->tx_head, 0, 0);
+	musb_writel(&tx->tx_buf, 0, 0);
+	musb_writel(&tx->tx_current, 0, 0);
+	musb_writel(&tx->tx_buf_current, 0, 0);
+	musb_writel(&tx->tx_info, 0, 0);
+	musb_writel(&tx->tx_rem_len, 0, 0);
+	/* musb_writel(&tx->tx_dummy, 0, 0); */
+	musb_writel(&tx->tx_complete, 0, ptr);
+}
+
+static void __init cppi_pool_init(struct cppi *cppi, struct cppi_channel *c)
+{
+	int	j;
+
+	/* initialize channel fields */
+	c->head = NULL;
+	c->tail = NULL;
+	c->last_processed = NULL;
+	c->channel.status = MUSB_DMA_STATUS_UNKNOWN;
+	c->controller = cppi;
+	c->is_rndis = 0;
+	c->freelist = NULL;
+
+	/* build the BD Free list for the channel */
+	for (j = 0; j < NUM_TXCHAN_BD + 1; j++) {
+		struct cppi_descriptor	*bd;
+		dma_addr_t		dma;
+
+		bd = dma_pool_alloc(cppi->pool, GFP_KERNEL, &dma);
+		bd->dma = dma;
+		cppi_bd_free(c, bd);
+	}
+}
+
+static int cppi_channel_abort(struct dma_channel *);
+
+static void cppi_pool_free(struct cppi_channel *c)
+{
+	struct cppi		*cppi = c->controller;
+	struct cppi_descriptor	*bd;
+
+	(void) cppi_channel_abort(&c->channel);
+	c->channel.status = MUSB_DMA_STATUS_UNKNOWN;
+	c->controller = NULL;
+
+	/* free all its bds */
+	bd = c->last_processed;
+	do {
+		if (bd)
+			dma_pool_free(cppi->pool, bd, bd->dma);
+		bd = cppi_bd_alloc(c);
+	} while (bd);
+	c->last_processed = NULL;
+}
+
+static int __init cppi_controller_start(struct dma_controller *c)
+{
+	struct cppi	*controller;
+	void __iomem	*tibase;
+	int		i;
+
+	controller = container_of(c, struct cppi, controller);
+
+	/* do whatever is necessary to start controller */
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+		controller->tx[i].transmit = true;
+		controller->tx[i].index = i;
+	}
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++) {
+		controller->rx[i].transmit = false;
+		controller->rx[i].index = i;
+	}
+
+	/* setup BD list on a per channel basis */
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++)
+		cppi_pool_init(controller, controller->tx + i);
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++)
+		cppi_pool_init(controller, controller->rx + i);
+
+	tibase =  controller->tibase;
+	INIT_LIST_HEAD(&controller->tx_complete);
+
+	/* initialise tx/rx channel head pointers to zero */
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+		struct cppi_channel	*tx_ch = controller->tx + i;
+		struct cppi_tx_stateram __iomem *tx;
+
+		INIT_LIST_HEAD(&tx_ch->tx_complete);
+
+		tx = tibase + DAVINCI_TXCPPI_STATERAM_OFFSET(i);
+		tx_ch->state_ram = tx;
+		cppi_reset_tx(tx, 0);
+	}
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++) {
+		struct cppi_channel	*rx_ch = controller->rx + i;
+		struct cppi_rx_stateram __iomem *rx;
+
+		INIT_LIST_HEAD(&rx_ch->tx_complete);
+
+		rx = tibase + DAVINCI_RXCPPI_STATERAM_OFFSET(i);
+		rx_ch->state_ram = rx;
+		cppi_reset_rx(rx);
+	}
+
+	/* enable individual cppi channels */
+	musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_INTENAB_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+
+	/* enable tx/rx CPPI control */
+	musb_writel(tibase, DAVINCI_TXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_ENABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_ENABLE);
+
+	/* disable RNDIS mode, also host rx RNDIS autorequest */
+	musb_writel(tibase, DAVINCI_RNDIS_REG, 0);
+	musb_writel(tibase, DAVINCI_AUTOREQ_REG, 0);
+
+	return 0;
+}
+
+/*
+ *  Stop DMA controller
+ *
+ *  De-Init the DMA controller as necessary.
+ */
+
+static int cppi_controller_stop(struct dma_controller *c)
+{
+	struct cppi		*controller;
+	void __iomem		*tibase;
+	int			i;
+
+	controller = container_of(c, struct cppi, controller);
+
+	tibase = controller->tibase;
+	/* DISABLE INDIVIDUAL CHANNEL Interrupts */
+	musb_writel(tibase, DAVINCI_TXCPPI_INTCLR_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_INTCLR_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+
+	DBG(1, "Tearing down RX and TX Channels\n");
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+		/* FIXME restructure of txdma to use bds like rxdma */
+		controller->tx[i].last_processed = NULL;
+		cppi_pool_free(controller->tx + i);
+	}
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++)
+		cppi_pool_free(controller->rx + i);
+
+	/* in Tx Case proper teardown is supported. We resort to disabling
+	 * Tx/Rx CPPI after cleanup of Tx channels. Before TX teardown is
+	 * complete TX CPPI cannot be disabled.
+	 */
+	/*disable tx/rx cppi */
+	musb_writel(tibase, DAVINCI_TXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_DISABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_DISABLE);
+
+	return 0;
+}
+
+/* While dma channel is allocated, we only want the core irqs active
+ * for fault reports, otherwise we'd get irqs that we don't care about.
+ * Except for TX irqs, where dma done != fifo empty and reusable ...
+ *
+ * NOTE: docs don't say either way, but irq masking **enables** irqs.
+ *
+ * REVISIT same issue applies to pure PIO usage too, and non-cppi dma...
+ */
+static inline void core_rxirq_disable(void __iomem *tibase, unsigned epnum)
+{
+	musb_writel(tibase, DAVINCI_USB_INT_MASK_CLR_REG, 1 << (epnum + 8));
+}
+
+static inline void core_rxirq_enable(void __iomem *tibase, unsigned epnum)
+{
+	musb_writel(tibase, DAVINCI_USB_INT_MASK_SET_REG, 1 << (epnum + 8));
+}
+
+
+/*
+ * Allocate a CPPI Channel for DMA.  With CPPI, channels are bound to
+ * each transfer direction of a non-control endpoint, so allocating
+ * (and deallocating) is mostly a way to notice bad housekeeping on
+ * the software side.  We assume the irqs are always active.
+ */
+static struct dma_channel *
+cppi_channel_allocate(struct dma_controller *c,
+		struct musb_hw_ep *ep, u8 transmit)
+{
+	struct cppi		*controller;
+	u8			index;
+	struct cppi_channel	*cppi_ch;
+	void __iomem		*tibase;
+
+	controller = container_of(c, struct cppi, controller);
+	tibase = controller->tibase;
+
+	/* ep0 doesn't use DMA; remember cppi indices are 0..N-1 */
+	index = ep->epnum - 1;
+
+	/* return the corresponding CPPI Channel Handle, and
+	 * probably disable the non-CPPI irq until we need it.
+	 */
+	if (transmit) {
+		if (index >= ARRAY_SIZE(controller->tx)) {
+			DBG(1, "no %cX%d CPPI channel\n", 'T', index);
+			return NULL;
+		}
+		cppi_ch = controller->tx + index;
+	} else {
+		if (index >= ARRAY_SIZE(controller->rx)) {
+			DBG(1, "no %cX%d CPPI channel\n", 'R', index);
+			return NULL;
+		}
+		cppi_ch = controller->rx + index;
+		core_rxirq_disable(tibase, ep->epnum);
+	}
+
+	/* REVISIT make this an error later once the same driver code works
+	 * with the other DMA engine too
+	 */
+	if (cppi_ch->hw_ep)
+		DBG(1, "re-allocating DMA%d %cX channel %p\n",
+				index, transmit ? 'T' : 'R', cppi_ch);
+	cppi_ch->hw_ep = ep;
+	cppi_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+	DBG(4, "Allocate CPPI%d %cX\n", index, transmit ? 'T' : 'R');
+	return &cppi_ch->channel;
+}
+
+/* Release a CPPI Channel.  */
+static void cppi_channel_release(struct dma_channel *channel)
+{
+	struct cppi_channel	*c;
+	void __iomem		*tibase;
+
+	/* REVISIT:  for paranoia, check state and abort if needed... */
+
+	c = container_of(channel, struct cppi_channel, channel);
+	tibase = c->controller->tibase;
+	if (!c->hw_ep)
+		DBG(1, "releasing idle DMA channel %p\n", c);
+	else if (!c->transmit)
+		core_rxirq_enable(tibase, c->index + 1);
+
+	/* for now, leave its cppi IRQ enabled (we won't trigger it) */
+	c->hw_ep = NULL;
+	channel->status = MUSB_DMA_STATUS_UNKNOWN;
+}
+
+/* Context: controller irqlocked */
+static void
+cppi_dump_rx(int level, struct cppi_channel *c, const char *tag)
+{
+	void __iomem			*base = c->controller->mregs;
+	struct cppi_rx_stateram __iomem	*rx = c->state_ram;
+
+	musb_ep_select(base, c->index + 1);
+
+	DBG(level, "RX DMA%d%s: %d left, csr %04x, "
+			"%08x H%08x S%08x C%08x, "
+			"B%08x L%08x %08x .. %08x"
+			"\n",
+		c->index, tag,
+		musb_readl(c->controller->tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + 4 * c->index),
+		musb_readw(c->hw_ep->regs, MUSB_RXCSR),
+
+		musb_readl(&rx->rx_skipbytes, 0),
+		musb_readl(&rx->rx_head, 0),
+		musb_readl(&rx->rx_sop, 0),
+		musb_readl(&rx->rx_current, 0),
+
+		musb_readl(&rx->rx_buf_current, 0),
+		musb_readl(&rx->rx_len_len, 0),
+		musb_readl(&rx->rx_cnt_cnt, 0),
+		musb_readl(&rx->rx_complete, 0)
+		);
+}
+
+/* Context: controller irqlocked */
+static void
+cppi_dump_tx(int level, struct cppi_channel *c, const char *tag)
+{
+	void __iomem			*base = c->controller->mregs;
+	struct cppi_tx_stateram __iomem	*tx = c->state_ram;
+
+	musb_ep_select(base, c->index + 1);
+
+	DBG(level, "TX DMA%d%s: csr %04x, "
+			"H%08x S%08x C%08x %08x, "
+			"F%08x L%08x .. %08x"
+			"\n",
+		c->index, tag,
+		musb_readw(c->hw_ep->regs, MUSB_TXCSR),
+
+		musb_readl(&tx->tx_head, 0),
+		musb_readl(&tx->tx_buf, 0),
+		musb_readl(&tx->tx_current, 0),
+		musb_readl(&tx->tx_buf_current, 0),
+
+		musb_readl(&tx->tx_info, 0),
+		musb_readl(&tx->tx_rem_len, 0),
+		/* dummy/unused word 6 */
+		musb_readl(&tx->tx_complete, 0)
+		);
+}
+
+/* Context: controller irqlocked */
+static inline void
+cppi_rndis_update(struct cppi_channel *c, int is_rx,
+		void __iomem *tibase, int is_rndis)
+{
+	/* we may need to change the rndis flag for this cppi channel */
+	if (c->is_rndis != is_rndis) {
+		u32	value = musb_readl(tibase, DAVINCI_RNDIS_REG);
+		u32	temp = 1 << (c->index);
+
+		if (is_rx)
+			temp <<= 16;
+		if (is_rndis)
+			value |= temp;
+		else
+			value &= ~temp;
+		musb_writel(tibase, DAVINCI_RNDIS_REG, value);
+		c->is_rndis = is_rndis;
+	}
+}
+
+static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
+{
+	pr_debug("RXBD/%s %08x: "
+			"nxt %08x buf %08x off.blen %08x opt.plen %08x\n",
+			tag, bd->dma,
+			bd->hw_next, bd->hw_bufp, bd->hw_off_len,
+			bd->hw_options);
+}
+
+static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx)
+{
+#if MUSB_DEBUG > 0
+	struct cppi_descriptor	*bd;
+
+	if (!_dbg_level(level))
+		return;
+	cppi_dump_rx(level, rx, tag);
+	if (rx->last_processed)
+		cppi_dump_rxbd("last", rx->last_processed);
+	for (bd = rx->head; bd; bd = bd->next)
+		cppi_dump_rxbd("active", bd);
+#endif
+}
+
+
+/* NOTE:  DaVinci autoreq is ignored except for host side "RNDIS" mode RX;
+ * so we won't ever use it (see "CPPI RX Woes" below).
+ */
+static inline int cppi_autoreq_update(struct cppi_channel *rx,
+		void __iomem *tibase, int onepacket, unsigned n_bds)
+{
+	u32	val;
+
+#ifdef	RNDIS_RX_IS_USABLE
+	u32	tmp;
+	/* assert(is_host_active(musb)) */
+
+	/* start from "AutoReq never" */
+	tmp = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+	val = tmp & ~((0x3) << (rx->index * 2));
+
+	/* HCD arranged reqpkt for packet #1.  we arrange int
+	 * for all but the last one, maybe in two segments.
+	 */
+	if (!onepacket) {
+#if 0
+		/* use two segments, autoreq "all" then the last "never" */
+		val |= ((0x3) << (rx->index * 2));
+		n_bds--;
+#else
+		/* one segment, autoreq "all-but-last" */
+		val |= ((0x1) << (rx->index * 2));
+#endif
+	}
+
+	if (val != tmp) {
+		int n = 100;
+
+		/* make sure that autoreq is updated before continuing */
+		musb_writel(tibase, DAVINCI_AUTOREQ_REG, val);
+		do {
+			tmp = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+			if (tmp == val)
+				break;
+			cpu_relax();
+		} while (n-- > 0);
+	}
+#endif
+
+	/* REQPKT is turned off after each segment */
+	if (n_bds && rx->channel.actual_len) {
+		void __iomem	*regs = rx->hw_ep->regs;
+
+		val = musb_readw(regs, MUSB_RXCSR);
+		if (!(val & MUSB_RXCSR_H_REQPKT)) {
+			val |= MUSB_RXCSR_H_REQPKT | MUSB_RXCSR_H_WZC_BITS;
+			musb_writew(regs, MUSB_RXCSR, val);
+			/* flush writebufer */
+			val = musb_readw(regs, MUSB_RXCSR);
+		}
+	}
+	return n_bds;
+}
+
+
+/* Buffer enqueuing Logic:
+ *
+ *  - RX builds new queues each time, to help handle routine "early
+ *    termination" cases (faults, including errors and short reads)
+ *    more correctly.
+ *
+ *  - for now, TX reuses the same queue of BDs every time
+ *
+ * REVISIT long term, we want a normal dynamic model.
+ * ... the goal will be to append to the
+ * existing queue, processing completed "dma buffers" (segments) on the fly.
+ *
+ * Otherwise we force an IRQ latency between requests, which slows us a lot
+ * (especially in "transparent" dma).  Unfortunately that model seems to be
+ * inherent in the DMA model from the Mentor code, except in the rare case
+ * of transfers big enough (~128+ KB) that we could append "middle" segments
+ * in the TX paths.  (RX can't do this, see below.)
+ *
+ * That's true even in the CPPI- friendly iso case, where most urbs have
+ * several small segments provided in a group and where the "packet at a time"
+ * "transparent" DMA model is always correct, even on the RX side.
+ */
+
+/*
+ * CPPI TX:
+ * ========
+ * TX is a lot more reasonable than RX; it doesn't need to run in
+ * irq-per-packet mode very often.  RNDIS mode seems to behave too
+ * (except how it handles the exactly-N-packets case).  Building a
+ * txdma queue with multiple requests (urb or usb_request) looks
+ * like it would work ... but fault handling would need much testing.
+ *
+ * The main issue with TX mode RNDIS relates to transfer lengths that
+ * are an exact multiple of the packet length.  It appears that there's
+ * a hiccup in that case (maybe the DMA completes before the ZLP gets
+ * written?) boiling down to not being able to rely on CPPI writing any
+ * terminating zero length packet before the next transfer is written.
+ * So that's punted to PIO; better yet, gadget drivers can avoid it.
+ *
+ * Plus, there's allegedly an undocumented constraint that rndis transfer
+ * length be a multiple of 64 bytes ... but the chip doesn't act that
+ * way, and we really don't _want_ that behavior anyway.
+ *
+ * On TX, "transparent" mode works ... although experiments have shown
+ * problems trying to use the SOP/EOP bits in different USB packets.
+ *
+ * REVISIT try to handle terminating zero length packets using CPPI
+ * instead of doing it by PIO after an IRQ.  (Meanwhile, make Ethernet
+ * links avoid that issue by forcing them to avoid zlps.)
+ */
+static void
+cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx)
+{
+	unsigned		maxpacket = tx->maxpacket;
+	dma_addr_t		addr = tx->buf_dma + tx->offset;
+	size_t			length = tx->buf_len - tx->offset;
+	struct cppi_descriptor	*bd;
+	unsigned		n_bds;
+	unsigned		i;
+	struct cppi_tx_stateram	__iomem *tx_ram = tx->state_ram;
+	int			rndis;
+
+	/* TX can use the CPPI "rndis" mode, where we can probably fit this
+	 * transfer in one BD and one IRQ.  The only time we would NOT want
+	 * to use it is when hardware constraints prevent it, or if we'd
+	 * trigger the "send a ZLP?" confusion.
+	 */
+	rndis = (maxpacket & 0x3f) == 0
+		&& length < 0xffff
+		&& (length % maxpacket) != 0;
+
+	if (rndis) {
+		maxpacket = length;
+		n_bds = 1;
+	} else {
+		n_bds = length / maxpacket;
+		if (!length || (length % maxpacket))
+			n_bds++;
+		n_bds = min(n_bds, (unsigned) NUM_TXCHAN_BD);
+		length = min(n_bds * maxpacket, length);
+	}
+
+	DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%x len %u\n",
+			tx->index,
+			maxpacket,
+			rndis ? "rndis" : "transparent",
+			n_bds,
+			addr, length);
+
+	cppi_rndis_update(tx, 0, musb->ctrl_base, rndis);
+
+	/* assuming here that channel_program is called during
+	 * transfer initiation ... current code maintains state
+	 * for one outstanding request only (no queues, not even
+	 * the implicit ones of an iso urb).
+	 */
+
+	bd = tx->freelist;
+	tx->head = bd;
+	tx->last_processed = NULL;
+
+	/* FIXME use BD pool like RX side does, and just queue
+	 * the minimum number for this request.
+	 */
+
+	/* Prepare queue of BDs first, then hand it to hardware.
+	 * All BDs except maybe the last should be of full packet
+	 * size; for RNDIS there _is_ only that last packet.
+	 */
+	for (i = 0; i < n_bds; ) {
+		if (++i < n_bds && bd->next)
+			bd->hw_next = bd->next->dma;
+		else
+			bd->hw_next = 0;
+
+		bd->hw_bufp = tx->buf_dma + tx->offset;
+
+		/* FIXME set EOP only on the last packet,
+		 * SOP only on the first ... avoid IRQs
+		 */
+		if ((tx->offset + maxpacket) <= tx->buf_len) {
+			tx->offset += maxpacket;
+			bd->hw_off_len = maxpacket;
+			bd->hw_options = CPPI_SOP_SET | CPPI_EOP_SET
+				| CPPI_OWN_SET | maxpacket;
+		} else {
+			/* only this one may be a partial USB Packet */
+			u32		partial_len;
+
+			partial_len = tx->buf_len - tx->offset;
+			tx->offset = tx->buf_len;
+			bd->hw_off_len = partial_len;
+
+			bd->hw_options = CPPI_SOP_SET | CPPI_EOP_SET
+				| CPPI_OWN_SET | partial_len;
+			if (partial_len == 0)
+				bd->hw_options |= CPPI_ZERO_SET;
+		}
+
+		DBG(5, "TXBD %p: nxt %08x buf %08x len %04x opt %08x\n",
+				bd, bd->hw_next, bd->hw_bufp,
+				bd->hw_off_len, bd->hw_options);
+
+		/* update the last BD enqueued to the list */
+		tx->tail = bd;
+		bd = bd->next;
+	}
+
+	/* BDs live in DMA-coherent memory, but writes might be pending */
+	cpu_drain_writebuffer();
+
+	/* Write to the HeadPtr in state RAM to trigger */
+	musb_writel(&tx_ram->tx_head, 0, (u32)tx->freelist->dma);
+
+	cppi_dump_tx(5, tx, "/S");
+}
+
+/*
+ * CPPI RX Woes:
+ * =============
+ * Consider a 1KB bulk RX buffer in two scenarios:  (a) it's fed two 300 byte
+ * packets back-to-back, and (b) it's fed two 512 byte packets back-to-back.
+ * (Full speed transfers have similar scenarios.)
+ *
+ * The correct behavior for Linux is that (a) fills the buffer with 300 bytes,
+ * and the next packet goes into a buffer that's queued later; while (b) fills
+ * the buffer with 1024 bytes.  How to do that with CPPI?
+ *
+ * - RX queues in "rndis" mode -- one single BD -- handle (a) correctly, but
+ *   (b) loses **BADLY** because nothing (!) happens when that second packet
+ *   fills the buffer, much less when a third one arrives.  (Which makes this
+ *   not a "true" RNDIS mode.  In the RNDIS protocol short-packet termination
+ *   is optional, and it's fine if peripherals -- not hosts! -- pad messages
+ *   out to end-of-buffer.  Standard PCI host controller DMA descriptors
+ *   implement that mode by default ... which is no accident.)
+ *
+ * - RX queues in "transparent" mode -- two BDs with 512 bytes each -- have
+ *   converse problems:  (b) is handled right, but (a) loses badly.  CPPI RX
+ *   ignores SOP/EOP markings and processes both of those BDs; so both packets
+ *   are loaded into the buffer (with a 212 byte gap between them), and the next
+ *   buffer queued will NOT get its 300 bytes of data. (It seems like SOP/EOP
+ *   are intended as outputs for RX queues, not inputs...)
+ *
+ * - A variant of "transparent" mode -- one BD at a time -- is the only way to
+ *   reliably make both cases work, with software handling both cases correctly
+ *   and at the significant penalty of needing an IRQ per packet.  (The lack of
+ *   I/O overlap can be slightly ameliorated by enabling double buffering.)
+ *
+ * So how to get rid of IRQ-per-packet?  The transparent multi-BD case could
+ * be used in special cases like mass storage, which sets URB_SHORT_NOT_OK
+ * (or maybe its peripheral side counterpart) to flag (a) scenarios as errors
+ * with guaranteed driver level fault recovery and scrubbing out what's left
+ * of that garbaged datastream.
+ *
+ * But there seems to be no way to identify the cases where CPPI RNDIS mode
+ * is appropriate -- which do NOT include RNDIS host drivers, but do include
+ * the CDC Ethernet driver! -- and the documentation is incomplete/wrong.
+ * So we can't _ever_ use RX RNDIS mode ... except by using a heuristic
+ * that applies best on the peripheral side (and which could fail rudely).
+ *
+ * Leaving only "transparent" mode; we avoid multi-bd modes in almost all
+ * cases other than mass storage class.  Otherwise we're correct but slow,
+ * since CPPI penalizes our need for a "true RNDIS" default mode.
+ */
+
+
+/* Heuristic, intended to kick in for ethernet/rndis peripheral ONLY
+ *
+ * IFF
+ *  (a)	peripheral mode ... since rndis peripherals could pad their
+ *	writes to hosts, causing i/o failure; or we'd have to cope with
+ *	a largely unknowable variety of host side protocol variants
+ *  (b)	and short reads are NOT errors ... since full reads would
+ *	cause those same i/o failures
+ *  (c)	and read length is
+ *	- less than 64KB (max per cppi descriptor)
+ *	- not a multiple of 4096 (g_zero default, full reads typical)
+ *	- N (>1) packets long, ditto (full reads not EXPECTED)
+ * THEN
+ *   try rx rndis mode
+ *
+ * Cost of heuristic failing:  RXDMA wedges at the end of transfers that
+ * fill out the whole buffer.  Buggy host side usb network drivers could
+ * trigger that, but "in the field" such bugs seem to be all but unknown.
+ *
+ * So this module parameter lets the heuristic be disabled.  When using
+ * gadgetfs, the heuristic will probably need to be disabled.
+ */
+static int cppi_rx_rndis = 1;
+
+module_param(cppi_rx_rndis, bool, 0);
+MODULE_PARM_DESC(cppi_rx_rndis, "enable/disable RX RNDIS heuristic");
+
+
+/**
+ * cppi_next_rx_segment - dma read for the next chunk of a buffer
+ * @musb: the controller
+ * @rx: dma channel
+ * @onepacket: true unless caller treats short reads as errors, and
+ *	performs fault recovery above usbcore.
+ * Context: controller irqlocked
+ *
+ * See above notes about why we can't use multi-BD RX queues except in
+ * rare cases (mass storage class), and can never use the hardware "rndis"
+ * mode (since it's not a "true" RNDIS mode) with complete safety..
+ *
+ * It's ESSENTIAL that callers specify "onepacket" mode unless they kick in
+ * code to recover from corrupted datastreams after each short transfer.
+ */
+static void
+cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
+{
+	unsigned		maxpacket = rx->maxpacket;
+	dma_addr_t		addr = rx->buf_dma + rx->offset;
+	size_t			length = rx->buf_len - rx->offset;
+	struct cppi_descriptor	*bd, *tail;
+	unsigned		n_bds;
+	unsigned		i;
+	void __iomem		*tibase = musb->ctrl_base;
+	int			is_rndis = 0;
+	struct cppi_rx_stateram	__iomem *rx_ram = rx->state_ram;
+
+	if (onepacket) {
+		/* almost every USB driver, host or peripheral side */
+		n_bds = 1;
+
+		/* maybe apply the heuristic above */
+		if (cppi_rx_rndis
+				&& is_peripheral_active(musb)
+				&& length > maxpacket
+				&& (length & ~0xffff) == 0
+				&& (length & 0x0fff) != 0
+				&& (length & (maxpacket - 1)) == 0) {
+			maxpacket = length;
+			is_rndis = 1;
+		}
+	} else {
+		/* virtually nothing except mass storage class */
+		if (length > 0xffff) {
+			n_bds = 0xffff / maxpacket;
+			length = n_bds * maxpacket;
+		} else {
+			n_bds = length / maxpacket;
+			if (length % maxpacket)
+				n_bds++;
+		}
+		if (n_bds == 1)
+			onepacket = 1;
+		else
+			n_bds = min(n_bds, (unsigned) NUM_RXCHAN_BD);
+	}
+
+	/* In host mode, autorequest logic can generate some IN tokens; it's
+	 * tricky since we can't leave REQPKT set in RXCSR after the transfer
+	 * finishes. So:  multipacket transfers involve two or more segments.
+	 * And always at least two IRQs ... RNDIS mode is not an option.
+	 */
+	if (is_host_active(musb))
+		n_bds = cppi_autoreq_update(rx, tibase, onepacket, n_bds);
+
+	cppi_rndis_update(rx, 1, musb->ctrl_base, is_rndis);
+
+	length = min(n_bds * maxpacket, length);
+
+	DBG(4, "RX DMA%d seg, maxp %d %s bds %d (cnt %d) "
+			"dma 0x%x len %u %u/%u\n",
+			rx->index, maxpacket,
+			onepacket
+				? (is_rndis ? "rndis" : "onepacket")
+				: "multipacket",
+			n_bds,
+			musb_readl(tibase,
+				DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+					& 0xffff,
+			addr, length, rx->channel.actual_len, rx->buf_len);
+
+	/* only queue one segment at a time, since the hardware prevents
+	 * correct queue shutdown after unexpected short packets
+	 */
+	bd = cppi_bd_alloc(rx);
+	rx->head = bd;
+
+	/* Build BDs for all packets in this segment */
+	for (i = 0, tail = NULL; bd && i < n_bds; i++, tail = bd) {
+		u32	bd_len;
+
+		if (i) {
+			bd = cppi_bd_alloc(rx);
+			if (!bd)
+				break;
+			tail->next = bd;
+			tail->hw_next = bd->dma;
+		}
+		bd->hw_next = 0;
+
+		/* all but the last packet will be maxpacket size */
+		if (maxpacket < length)
+			bd_len = maxpacket;
+		else
+			bd_len = length;
+
+		bd->hw_bufp = addr;
+		addr += bd_len;
+		rx->offset += bd_len;
+
+		bd->hw_off_len = (0 /*offset*/ << 16) + bd_len;
+		bd->buflen = bd_len;
+
+		bd->hw_options = CPPI_OWN_SET | (i == 0 ? length : 0);
+		length -= bd_len;
+	}
+
+	/* we always expect at least one reusable BD! */
+	if (!tail) {
+		WARNING("rx dma%d -- no BDs? need %d\n", rx->index, n_bds);
+		return;
+	} else if (i < n_bds)
+		WARNING("rx dma%d -- only %d of %d BDs\n", rx->index, i, n_bds);
+
+	tail->next = NULL;
+	tail->hw_next = 0;
+
+	bd = rx->head;
+	rx->tail = tail;
+
+	/* short reads and other faults should terminate this entire
+	 * dma segment.  we want one "dma packet" per dma segment, not
+	 * one per USB packet, terminating the whole queue at once...
+	 * NOTE that current hardware seems to ignore SOP and EOP.
+	 */
+	bd->hw_options |= CPPI_SOP_SET;
+	tail->hw_options |= CPPI_EOP_SET;
+
+	if (debug >= 5) {
+		struct cppi_descriptor	*d;
+
+		for (d = rx->head; d; d = d->next)
+			cppi_dump_rxbd("S", d);
+	}
+
+	/* in case the preceding transfer left some state... */
+	tail = rx->last_processed;
+	if (tail) {
+		tail->next = bd;
+		tail->hw_next = bd->dma;
+	}
+
+	core_rxirq_enable(tibase, rx->index + 1);
+
+	/* BDs live in DMA-coherent memory, but writes might be pending */
+	cpu_drain_writebuffer();
+
+	/* REVISIT specs say to write this AFTER the BUFCNT register
+	 * below ... but that loses badly.
+	 */
+	musb_writel(&rx_ram->rx_head, 0, bd->dma);
+
+	/* bufferCount must be at least 3, and zeroes on completion
+	 * unless it underflows below zero, or stops at two, or keeps
+	 * growing ... grr.
+	 */
+	i = musb_readl(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+			& 0xffff;
+
+	if (!i)
+		musb_writel(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+			n_bds + 2);
+	else if (n_bds > (i - 3))
+		musb_writel(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+			n_bds - (i - 3));
+
+	i = musb_readl(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+			& 0xffff;
+	if (i < (2 + n_bds)) {
+		DBG(2, "bufcnt%d underrun - %d (for %d)\n",
+					rx->index, i, n_bds);
+		musb_writel(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+			n_bds + 2);
+	}
+
+	cppi_dump_rx(4, rx, "/S");
+}
+
+/**
+ * cppi_channel_program - program channel for data transfer
+ * @ch: the channel
+ * @maxpacket: max packet size
+ * @mode: For RX, 1 unless the usb protocol driver promised to treat
+ *	all short reads as errors and kick in high level fault recovery.
+ *	For TX, ignored because of RNDIS mode races/glitches.
+ * @dma_addr: dma address of buffer
+ * @len: length of buffer
+ * Context: controller irqlocked
+ */
+static int cppi_channel_program(struct dma_channel *ch,
+		u16 maxpacket, u8 mode,
+		dma_addr_t dma_addr, u32 len)
+{
+	struct cppi_channel	*cppi_ch;
+	struct cppi		*controller;
+	struct musb		*musb;
+
+	cppi_ch = container_of(ch, struct cppi_channel, channel);
+	controller = cppi_ch->controller;
+	musb = controller->musb;
+
+	switch (ch->status) {
+	case MUSB_DMA_STATUS_BUS_ABORT:
+	case MUSB_DMA_STATUS_CORE_ABORT:
+		/* fault irq handler should have handled cleanup */
+		WARNING("%cX DMA%d not cleaned up after abort!\n",
+				cppi_ch->transmit ? 'T' : 'R',
+				cppi_ch->index);
+		/* WARN_ON(1); */
+		break;
+	case MUSB_DMA_STATUS_BUSY:
+		WARNING("program active channel?  %cX DMA%d\n",
+				cppi_ch->transmit ? 'T' : 'R',
+				cppi_ch->index);
+		/* WARN_ON(1); */
+		break;
+	case MUSB_DMA_STATUS_UNKNOWN:
+		DBG(1, "%cX DMA%d not allocated!\n",
+				cppi_ch->transmit ? 'T' : 'R',
+				cppi_ch->index);
+		/* FALLTHROUGH */
+	case MUSB_DMA_STATUS_FREE:
+		break;
+	}
+
+	ch->status = MUSB_DMA_STATUS_BUSY;
+
+	/* set transfer parameters, then queue up its first segment */
+	cppi_ch->buf_dma = dma_addr;
+	cppi_ch->offset = 0;
+	cppi_ch->maxpacket = maxpacket;
+	cppi_ch->buf_len = len;
+
+	/* TX channel? or RX? */
+	if (cppi_ch->transmit)
+		cppi_next_tx_segment(musb, cppi_ch);
+	else
+		cppi_next_rx_segment(musb, cppi_ch, mode);
+
+	return true;
+}
+
+static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
+{
+	struct cppi_channel		*rx = &cppi->rx[ch];
+	struct cppi_rx_stateram __iomem	*state = rx->state_ram;
+	struct cppi_descriptor		*bd;
+	struct cppi_descriptor		*last = rx->last_processed;
+	bool				completed = false;
+	bool				acked = false;
+	int				i;
+	dma_addr_t			safe2ack;
+	void __iomem			*regs = rx->hw_ep->regs;
+
+	cppi_dump_rx(6, rx, "/K");
+
+	bd = last ? last->next : rx->head;
+	if (!bd)
+		return false;
+
+	/* run through all completed BDs */
+	for (i = 0, safe2ack = musb_readl(&state->rx_complete, 0);
+			(safe2ack || completed) && bd && i < NUM_RXCHAN_BD;
+			i++, bd = bd->next) {
+		u16	len;
+
+		/* catch latest BD writes from CPPI */
+		rmb();
+		if (!completed && (bd->hw_options & CPPI_OWN_SET))
+			break;
+
+		DBG(5, "C/RXBD %08x: nxt %08x buf %08x "
+			"off.len %08x opt.len %08x (%d)\n",
+			bd->dma, bd->hw_next, bd->hw_bufp,
+			bd->hw_off_len, bd->hw_options,
+			rx->channel.actual_len);
+
+		/* actual packet received length */
+		if ((bd->hw_options & CPPI_SOP_SET) && !completed)
+			len = bd->hw_off_len & CPPI_RECV_PKTLEN_MASK;
+		else
+			len = 0;
+
+		if (bd->hw_options & CPPI_EOQ_MASK)
+			completed = true;
+
+		if (!completed && len < bd->buflen) {
+			/* NOTE:  when we get a short packet, RXCSR_H_REQPKT
+			 * must have been cleared, and no more DMA packets may
+			 * active be in the queue... TI docs didn't say, but
+			 * CPPI ignores those BDs even though OWN is still set.
+			 */
+			completed = true;
+			DBG(3, "rx short %d/%d (%d)\n",
+					len, bd->buflen,
+					rx->channel.actual_len);
+		}
+
+		/* If we got here, we expect to ack at least one BD; meanwhile
+		 * CPPI may completing other BDs while we scan this list...
+		 *
+		 * RACE: we can notice OWN cleared before CPPI raises the
+		 * matching irq by writing that BD as the completion pointer.
+		 * In such cases, stop scanning and wait for the irq, avoiding
+		 * lost acks and states where BD ownership is unclear.
+		 */
+		if (bd->dma == safe2ack) {
+			musb_writel(&state->rx_complete, 0, safe2ack);
+			safe2ack = musb_readl(&state->rx_complete, 0);
+			acked = true;
+			if (bd->dma == safe2ack)
+				safe2ack = 0;
+		}
+
+		rx->channel.actual_len += len;
+
+		cppi_bd_free(rx, last);
+		last = bd;
+
+		/* stop scanning on end-of-segment */
+		if (bd->hw_next == 0)
+			completed = true;
+	}
+	rx->last_processed = last;
+
+	/* dma abort, lost ack, or ... */
+	if (!acked && last) {
+		int	csr;
+
+		if (safe2ack == 0 || safe2ack == rx->last_processed->dma)
+			musb_writel(&state->rx_complete, 0, safe2ack);
+		if (safe2ack == 0) {
+			cppi_bd_free(rx, last);
+			rx->last_processed = NULL;
+
+			/* if we land here on the host side, H_REQPKT will
+			 * be clear and we need to restart the queue...
+			 */
+			WARN_ON(rx->head);
+		}
+		musb_ep_select(cppi->mregs, rx->index + 1);
+		csr = musb_readw(regs, MUSB_RXCSR);
+		if (csr & MUSB_RXCSR_DMAENAB) {
+			DBG(4, "list%d %p/%p, last %08x%s, csr %04x\n",
+				rx->index,
+				rx->head, rx->tail,
+				rx->last_processed
+					? rx->last_processed->dma
+					: 0,
+				completed ? ", completed" : "",
+				csr);
+			cppi_dump_rxq(4, "/what?", rx);
+		}
+	}
+	if (!completed) {
+		int	csr;
+
+		rx->head = bd;
+
+		/* REVISIT seems like "autoreq all but EOP" doesn't...
+		 * setting it here "should" be racey, but seems to work
+		 */
+		csr = musb_readw(rx->hw_ep->regs, MUSB_RXCSR);
+		if (is_host_active(cppi->musb)
+				&& bd
+				&& !(csr & MUSB_RXCSR_H_REQPKT)) {
+			csr |= MUSB_RXCSR_H_REQPKT;
+			musb_writew(regs, MUSB_RXCSR,
+					MUSB_RXCSR_H_WZC_BITS | csr);
+			csr = musb_readw(rx->hw_ep->regs, MUSB_RXCSR);
+		}
+	} else {
+		rx->head = NULL;
+		rx->tail = NULL;
+	}
+
+	cppi_dump_rx(6, rx, completed ? "/completed" : "/cleaned");
+	return completed;
+}
+
+void cppi_completion(struct musb *musb, u32 rx, u32 tx)
+{
+	void __iomem		*tibase;
+	int			i, index;
+	struct cppi		*cppi;
+	struct musb_hw_ep	*hw_ep = NULL;
+
+	cppi = container_of(musb->dma_controller, struct cppi, controller);
+
+	tibase = musb->ctrl_base;
+
+	/* process TX channels */
+	for (index = 0; tx; tx = tx >> 1, index++) {
+		struct cppi_channel		*tx_ch;
+		struct cppi_tx_stateram __iomem	*tx_ram;
+		bool				completed = false;
+		struct cppi_descriptor		*bd;
+
+		if (!(tx & 1))
+			continue;
+
+		tx_ch = cppi->tx + index;
+		tx_ram = tx_ch->state_ram;
+
+		/* FIXME  need a cppi_tx_scan() routine, which
+		 * can also be called from abort code
+		 */
+
+		cppi_dump_tx(5, tx_ch, "/E");
+
+		bd = tx_ch->head;
+
+		if (NULL == bd) {
+			DBG(1, "null BD\n");
+			continue;
+		}
+
+		/* run through all completed BDs */
+		for (i = 0; !completed && bd && i < NUM_TXCHAN_BD;
+				i++, bd = bd->next) {
+			u16	len;
+
+			/* catch latest BD writes from CPPI */
+			rmb();
+			if (bd->hw_options & CPPI_OWN_SET)
+				break;
+
+			DBG(5, "C/TXBD %p n %x b %x off %x opt %x\n",
+					bd, bd->hw_next, bd->hw_bufp,
+					bd->hw_off_len, bd->hw_options);
+
+			len = bd->hw_off_len & CPPI_BUFFER_LEN_MASK;
+			tx_ch->channel.actual_len += len;
+
+			tx_ch->last_processed = bd;
+
+			/* write completion register to acknowledge
+			 * processing of completed BDs, and possibly
+			 * release the IRQ; EOQ might not be set ...
+			 *
+			 * REVISIT use the same ack strategy as rx
+			 *
+			 * REVISIT have observed bit 18 set; huh??
+			 */
+			/* if ((bd->hw_options & CPPI_EOQ_MASK)) */
+				musb_writel(&tx_ram->tx_complete, 0, bd->dma);
+
+			/* stop scanning on end-of-segment */
+			if (bd->hw_next == 0)
+				completed = true;
+		}
+
+		/* on end of segment, maybe go to next one */
+		if (completed) {
+			/* cppi_dump_tx(4, tx_ch, "/complete"); */
+
+			/* transfer more, or report completion */
+			if (tx_ch->offset >= tx_ch->buf_len) {
+				tx_ch->head = NULL;
+				tx_ch->tail = NULL;
+				tx_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+				hw_ep = tx_ch->hw_ep;
+
+				/* Peripheral role never repurposes the
+				 * endpoint, so immediate completion is
+				 * safe.  Host role waits for the fifo
+				 * to empty (TXPKTRDY irq) before going
+				 * to the next queued bulk transfer.
+				 */
+				if (is_host_active(cppi->musb)) {
+#if 0
+					/* WORKAROUND because we may
+					 * not always get TXKPTRDY ...
+					 */
+					int	csr;
+
+					csr = musb_readw(hw_ep->regs,
+						MUSB_TXCSR);
+					if (csr & MUSB_TXCSR_TXPKTRDY)
+#endif
+						completed = false;
+				}
+				if (completed)
+					musb_dma_completion(musb, index + 1, 1);
+
+			} else {
+				/* Bigger transfer than we could fit in
+				 * that first batch of descriptors...
+				 */
+				cppi_next_tx_segment(musb, tx_ch);
+			}
+		} else
+			tx_ch->head = bd;
+	}
+
+	/* Start processing the RX block */
+	for (index = 0; rx; rx = rx >> 1, index++) {
+
+		if (rx & 1) {
+			struct cppi_channel		*rx_ch;
+
+			rx_ch = cppi->rx + index;
+
+			/* let incomplete dma segments finish */
+			if (!cppi_rx_scan(cppi, index))
+				continue;
+
+			/* start another dma segment if needed */
+			if (rx_ch->channel.actual_len != rx_ch->buf_len
+					&& rx_ch->channel.actual_len
+						== rx_ch->offset) {
+				cppi_next_rx_segment(musb, rx_ch, 1);
+				continue;
+			}
+
+			/* all segments completed! */
+			rx_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+			hw_ep = rx_ch->hw_ep;
+
+			core_rxirq_disable(tibase, index + 1);
+			musb_dma_completion(musb, index + 1, 0);
+		}
+	}
+
+	/* write to CPPI EOI register to re-enable interrupts */
+	musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0);
+}
+
+/* Instantiate a software object representing a DMA controller. */
+struct dma_controller *__init
+dma_controller_create(struct musb *musb, void __iomem *mregs)
+{
+	struct cppi		*controller;
+
+	controller = kzalloc(sizeof *controller, GFP_KERNEL);
+	if (!controller)
+		return NULL;
+
+	controller->mregs = mregs;
+	controller->tibase = mregs - DAVINCI_BASE_OFFSET;
+
+	controller->musb = musb;
+	controller->controller.start = cppi_controller_start;
+	controller->controller.stop = cppi_controller_stop;
+	controller->controller.channel_alloc = cppi_channel_allocate;
+	controller->controller.channel_release = cppi_channel_release;
+	controller->controller.channel_program = cppi_channel_program;
+	controller->controller.channel_abort = cppi_channel_abort;
+
+	/* NOTE: allocating from on-chip SRAM would give the least
+	 * contention for memory access, if that ever matters here.
+	 */
+
+	/* setup BufferPool */
+	controller->pool = dma_pool_create("cppi",
+			controller->musb->controller,
+			sizeof(struct cppi_descriptor),
+			CPPI_DESCRIPTOR_ALIGN, 0);
+	if (!controller->pool) {
+		kfree(controller);
+		return NULL;
+	}
+
+	return &controller->controller;
+}
+
+/*
+ *  Destroy a previously-instantiated DMA controller.
+ */
+void dma_controller_destroy(struct dma_controller *c)
+{
+	struct cppi	*cppi;
+
+	cppi = container_of(c, struct cppi, controller);
+
+	/* assert:  caller stopped the controller first */
+	dma_pool_destroy(cppi->pool);
+
+	kfree(cppi);
+}
+
+/*
+ * Context: controller irqlocked, endpoint selected
+ */
+static int cppi_channel_abort(struct dma_channel *channel)
+{
+	struct cppi_channel	*cppi_ch;
+	struct cppi		*controller;
+	void __iomem		*mbase;
+	void __iomem		*tibase;
+	void __iomem		*regs;
+	u32			value;
+	struct cppi_descriptor	*queue;
+
+	cppi_ch = container_of(channel, struct cppi_channel, channel);
+
+	controller = cppi_ch->controller;
+
+	switch (channel->status) {
+	case MUSB_DMA_STATUS_BUS_ABORT:
+	case MUSB_DMA_STATUS_CORE_ABORT:
+		/* from RX or TX fault irq handler */
+	case MUSB_DMA_STATUS_BUSY:
+		/* the hardware needs shutting down */
+		regs = cppi_ch->hw_ep->regs;
+		break;
+	case MUSB_DMA_STATUS_UNKNOWN:
+	case MUSB_DMA_STATUS_FREE:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+
+	if (!cppi_ch->transmit && cppi_ch->head)
+		cppi_dump_rxq(3, "/abort", cppi_ch);
+
+	mbase = controller->mregs;
+	tibase = controller->tibase;
+
+	queue = cppi_ch->head;
+	cppi_ch->head = NULL;
+	cppi_ch->tail = NULL;
+
+	/* REVISIT should rely on caller having done this,
+	 * and caller should rely on us not changing it.
+	 * peripheral code is safe ... check host too.
+	 */
+	musb_ep_select(mbase, cppi_ch->index + 1);
+
+	if (cppi_ch->transmit) {
+		struct cppi_tx_stateram __iomem *tx_ram;
+		int			enabled;
+
+		/* mask interrupts raised to signal teardown complete.  */
+		enabled = musb_readl(tibase, DAVINCI_TXCPPI_INTENAB_REG)
+				& (1 << cppi_ch->index);
+		if (enabled)
+			musb_writel(tibase, DAVINCI_TXCPPI_INTCLR_REG,
+					(1 << cppi_ch->index));
+
+		/* REVISIT put timeouts on these controller handshakes */
+
+		cppi_dump_tx(6, cppi_ch, " (teardown)");
+
+		/* teardown DMA engine then usb core */
+		do {
+			value = musb_readl(tibase, DAVINCI_TXCPPI_TEAR_REG);
+		} while (!(value & CPPI_TEAR_READY));
+		musb_writel(tibase, DAVINCI_TXCPPI_TEAR_REG, cppi_ch->index);
+
+		tx_ram = cppi_ch->state_ram;
+		do {
+			value = musb_readl(&tx_ram->tx_complete, 0);
+		} while (0xFFFFFFFC != value);
+		musb_writel(&tx_ram->tx_complete, 0, 0xFFFFFFFC);
+
+		/* FIXME clean up the transfer state ... here?
+		 * the completion routine should get called with
+		 * an appropriate status code.
+		 */
+
+		value = musb_readw(regs, MUSB_TXCSR);
+		value &= ~MUSB_TXCSR_DMAENAB;
+		value |= MUSB_TXCSR_FLUSHFIFO;
+		musb_writew(regs, MUSB_TXCSR, value);
+		musb_writew(regs, MUSB_TXCSR, value);
+
+		/* re-enable interrupt */
+		if (enabled)
+			musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
+					(1 << cppi_ch->index));
+
+		/* While we scrub the TX state RAM, ensure that we clean
+		 * up any interrupt that's currently asserted:
+		 * 1. Write to completion Ptr value 0x1(bit 0 set)
+		 *    (write back mode)
+		 * 2. Write to completion Ptr value 0x0(bit 0 cleared)
+		 *    (compare mode)
+		 * Value written is compared(for bits 31:2) and when
+		 * equal, interrupt is deasserted.
+		 */
+		cppi_reset_tx(tx_ram, 1);
+		musb_writel(&tx_ram->tx_complete, 0, 0);
+
+		cppi_dump_tx(5, cppi_ch, " (done teardown)");
+
+		/* REVISIT tx side _should_ clean up the same way
+		 * as the RX side ... this does no cleanup at all!
+		 */
+
+	} else /* RX */ {
+		u16			csr;
+
+		/* NOTE: docs don't guarantee any of this works ...  we
+		 * expect that if the usb core stops telling the cppi core
+		 * to pull more data from it, then it'll be safe to flush
+		 * current RX DMA state iff any pending fifo transfer is done.
+		 */
+
+		core_rxirq_disable(tibase, cppi_ch->index + 1);
+
+		/* for host, ensure ReqPkt is never set again */
+		if (is_host_active(cppi_ch->controller->musb)) {
+			value = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+			value &= ~((0x3) << (cppi_ch->index * 2));
+			musb_writel(tibase, DAVINCI_AUTOREQ_REG, value);
+		}
+
+		csr = musb_readw(regs, MUSB_RXCSR);
+
+		/* for host, clear (just) ReqPkt at end of current packet(s) */
+		if (is_host_active(cppi_ch->controller->musb)) {
+			csr |= MUSB_RXCSR_H_WZC_BITS;
+			csr &= ~MUSB_RXCSR_H_REQPKT;
+		} else
+			csr |= MUSB_RXCSR_P_WZC_BITS;
+
+		/* clear dma enable */
+		csr &= ~(MUSB_RXCSR_DMAENAB);
+		musb_writew(regs, MUSB_RXCSR, csr);
+		csr = musb_readw(regs, MUSB_RXCSR);
+
+		/* Quiesce: wait for current dma to finish (if not cleanup).
+		 * We can't use bit zero of stateram->rx_sop, since that
+		 * refers to an entire "DMA packet" not just emptying the
+		 * current fifo.  Most segments need multiple usb packets.
+		 */
+		if (channel->status == MUSB_DMA_STATUS_BUSY)
+			udelay(50);
+
+		/* scan the current list, reporting any data that was
+		 * transferred and acking any IRQ
+		 */
+		cppi_rx_scan(controller, cppi_ch->index);
+
+		/* clobber the existing state once it's idle
+		 *
+		 * NOTE:  arguably, we should also wait for all the other
+		 * RX channels to quiesce (how??) and then temporarily
+		 * disable RXCPPI_CTRL_REG ... but it seems that we can
+		 * rely on the controller restarting from state ram, with
+		 * only RXCPPI_BUFCNT state being bogus.  BUFCNT will
+		 * correct itself after the next DMA transfer though.
+		 *
+		 * REVISIT does using rndis mode change that?
+		 */
+		cppi_reset_rx(cppi_ch->state_ram);
+
+		/* next DMA request _should_ load cppi head ptr */
+
+		/* ... we don't "free" that list, only mutate it in place.  */
+		cppi_dump_rx(5, cppi_ch, " (done abort)");
+
+		/* clean up previously pending bds */
+		cppi_bd_free(cppi_ch, cppi_ch->last_processed);
+		cppi_ch->last_processed = NULL;
+
+		while (queue) {
+			struct cppi_descriptor	*tmp = queue->next;
+
+			cppi_bd_free(cppi_ch, queue);
+			queue = tmp;
+		}
+	}
+
+	channel->status = MUSB_DMA_STATUS_FREE;
+	cppi_ch->buf_dma = 0;
+	cppi_ch->offset = 0;
+	cppi_ch->buf_len = 0;
+	cppi_ch->maxpacket = 0;
+	return 0;
+}
+
+/* TBD Queries:
+ *
+ * Power Management ... probably turn off cppi during suspend, restart;
+ * check state ram?  Clocking is presumably shared with usb core.
+ */
diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h
new file mode 100644
index 000000000000..fc5216b5d2c5
--- /dev/null
+++ b/drivers/usb/musb/cppi_dma.h
@@ -0,0 +1,133 @@
+/* Copyright (C) 2005-2006 by Texas Instruments */
+
+#ifndef _CPPI_DMA_H_
+#define _CPPI_DMA_H_
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/dmapool.h>
+
+#include "musb_dma.h"
+#include "musb_core.h"
+
+
+/* FIXME fully isolate CPPI from DaVinci ... the "CPPI generic" registers
+ * would seem to be shared with the TUSB6020 (over VLYNQ).
+ */
+
+#include "davinci.h"
+
+
+/* CPPI RX/TX state RAM */
+
+struct cppi_tx_stateram {
+	u32 tx_head;			/* "DMA packet" head descriptor */
+	u32 tx_buf;
+	u32 tx_current;			/* current descriptor */
+	u32 tx_buf_current;
+	u32 tx_info;			/* flags, remaining buflen */
+	u32 tx_rem_len;
+	u32 tx_dummy;			/* unused */
+	u32 tx_complete;
+};
+
+struct cppi_rx_stateram {
+	u32 rx_skipbytes;
+	u32 rx_head;
+	u32 rx_sop;			/* "DMA packet" head descriptor */
+	u32 rx_current;			/* current descriptor */
+	u32 rx_buf_current;
+	u32 rx_len_len;
+	u32 rx_cnt_cnt;
+	u32 rx_complete;
+};
+
+/* hw_options bits in CPPI buffer descriptors */
+#define CPPI_SOP_SET	((u32)(1 << 31))
+#define CPPI_EOP_SET	((u32)(1 << 30))
+#define CPPI_OWN_SET	((u32)(1 << 29))	/* owned by cppi */
+#define CPPI_EOQ_MASK	((u32)(1 << 28))
+#define CPPI_ZERO_SET	((u32)(1 << 23))	/* rx saw zlp; tx issues one */
+#define CPPI_RXABT_MASK	((u32)(1 << 19))	/* need more rx buffers */
+
+#define CPPI_RECV_PKTLEN_MASK 0xFFFF
+#define CPPI_BUFFER_LEN_MASK 0xFFFF
+
+#define CPPI_TEAR_READY ((u32)(1 << 31))
+
+/* CPPI data structure definitions */
+
+#define	CPPI_DESCRIPTOR_ALIGN	16	/* bytes; 5-dec docs say 4-byte align */
+
+struct cppi_descriptor {
+	/* hardware overlay */
+	u32		hw_next;	/* next buffer descriptor Pointer */
+	u32		hw_bufp;	/* i/o buffer pointer */
+	u32		hw_off_len;	/* buffer_offset16, buffer_length16 */
+	u32		hw_options;	/* flags:  SOP, EOP etc*/
+
+	struct cppi_descriptor *next;
+	dma_addr_t	dma;		/* address of this descriptor */
+	u32		buflen;		/* for RX: original buffer length */
+} __attribute__ ((aligned(CPPI_DESCRIPTOR_ALIGN)));
+
+
+struct cppi;
+
+/* CPPI  Channel Control structure */
+struct cppi_channel {
+	struct dma_channel	channel;
+
+	/* back pointer to the DMA controller structure */
+	struct cppi		*controller;
+
+	/* which direction of which endpoint? */
+	struct musb_hw_ep	*hw_ep;
+	bool			transmit;
+	u8			index;
+
+	/* DMA modes:  RNDIS or "transparent" */
+	u8			is_rndis;
+
+	/* book keeping for current transfer request */
+	dma_addr_t		buf_dma;
+	u32			buf_len;
+	u32			maxpacket;
+	u32			offset;		/* dma requested */
+
+	void __iomem		*state_ram;	/* CPPI state */
+
+	struct cppi_descriptor	*freelist;
+
+	/* BD management fields */
+	struct cppi_descriptor	*head;
+	struct cppi_descriptor	*tail;
+	struct cppi_descriptor	*last_processed;
+
+	/* use tx_complete in host role to track endpoints waiting for
+	 * FIFONOTEMPTY to clear.
+	 */
+	struct list_head	tx_complete;
+};
+
+/* CPPI DMA controller object */
+struct cppi {
+	struct dma_controller		controller;
+	struct musb			*musb;
+	void __iomem			*mregs;		/* Mentor regs */
+	void __iomem			*tibase;	/* TI/CPPI regs */
+
+	struct cppi_channel		tx[MUSB_C_NUM_EPT - 1];
+	struct cppi_channel		rx[MUSB_C_NUM_EPR - 1];
+
+	struct dma_pool			*pool;
+
+	struct list_head		tx_complete;
+};
+
+/* irq handling hook */
+extern void cppi_completion(struct musb *, u32 rx, u32 tx);
+
+#endif				/* end of ifndef _CPPI_DMA_H_ */
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
new file mode 100644
index 000000000000..75baf181a8cd
--- /dev/null
+++ b/drivers/usb/musb/davinci.c
@@ -0,0 +1,462 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/memory.h>
+#include <asm/arch/gpio.h>
+#include <asm/mach-types.h>
+
+#include "musb_core.h"
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+#include <asm/arch/i2c-client.h>
+#endif
+
+#include "davinci.h"
+#include "cppi_dma.h"
+
+
+/* REVISIT (PM) we should be able to keep the PHY in low power mode most
+ * of the time (24 MHZ oscillator and PLL off, etc) by setting POWER.D0
+ * and, when in host mode, autosuspending idle root ports... PHYPLLON
+ * (overriding SUSPENDM?) then likely needs to stay off.
+ */
+
+static inline void phy_on(void)
+{
+	/* start the on-chip PHY and its PLL */
+	__raw_writel(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON,
+			(void __force __iomem *) IO_ADDRESS(USBPHY_CTL_PADDR));
+	while ((__raw_readl((void __force __iomem *)
+				IO_ADDRESS(USBPHY_CTL_PADDR))
+			& USBPHY_PHYCLKGD) == 0)
+		cpu_relax();
+}
+
+static inline void phy_off(void)
+{
+	/* powerdown the on-chip PHY and its oscillator */
+	__raw_writel(USBPHY_OSCPDWN | USBPHY_PHYPDWN, (void __force __iomem *)
+			IO_ADDRESS(USBPHY_CTL_PADDR));
+}
+
+static int dma_off = 1;
+
+void musb_platform_enable(struct musb *musb)
+{
+	u32	tmp, old, val;
+
+	/* workaround:  setup irqs through both register sets */
+	tmp = (musb->epmask & DAVINCI_USB_TX_ENDPTS_MASK)
+			<< DAVINCI_USB_TXINT_SHIFT;
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+	old = tmp;
+	tmp = (musb->epmask & (0xfffe & DAVINCI_USB_RX_ENDPTS_MASK))
+			<< DAVINCI_USB_RXINT_SHIFT;
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+	tmp |= old;
+
+	val = ~MUSB_INTR_SOF;
+	tmp |= ((val & 0x01ff) << DAVINCI_USB_USBINT_SHIFT);
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+
+	if (is_dma_capable() && !dma_off)
+		printk(KERN_WARNING "%s %s: dma not reactivated\n",
+				__FILE__, __func__);
+	else
+		dma_off = 0;
+
+	/* force a DRVVBUS irq so we can start polling for ID change */
+	if (is_otg_enabled(musb))
+		musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
+			DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT);
+}
+
+/*
+ * Disable the HDRC and flush interrupts
+ */
+void musb_platform_disable(struct musb *musb)
+{
+	/* because we don't set CTRLR.UINT, "important" to:
+	 *  - not read/write INTRUSB/INTRUSBE
+	 *  - (except during initial setup, as workaround)
+	 *  - use INTSETR/INTCLRR instead
+	 */
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_CLR_REG,
+			  DAVINCI_USB_USBINT_MASK
+			| DAVINCI_USB_TXINT_MASK
+			| DAVINCI_USB_RXINT_MASK);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	musb_writel(musb->ctrl_base, DAVINCI_USB_EOI_REG, 0);
+
+	if (is_dma_capable() && !dma_off)
+		WARNING("dma still active\n");
+}
+
+
+/* REVISIT it's not clear whether DaVinci can support full OTG.  */
+
+static int vbus_state = -1;
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+#define	portstate(stmt)		stmt
+#else
+#define	portstate(stmt)
+#endif
+
+
+/* VBUS SWITCHING IS BOARD-SPECIFIC */
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+#ifndef CONFIG_MACH_DAVINCI_EVM_OTG
+
+/* I2C operations are always synchronous, and require a task context.
+ * With unloaded systems, using the shared workqueue seems to suffice
+ * to satisfy the 100msec A_WAIT_VRISE timeout...
+ */
+static void evm_deferred_drvvbus(struct work_struct *ignored)
+{
+	davinci_i2c_expander_op(0x3a, USB_DRVVBUS, vbus_state);
+	vbus_state = !vbus_state;
+}
+static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus);
+
+#endif	/* modified board */
+#endif	/* EVM */
+
+static void davinci_source_power(struct musb *musb, int is_on, int immediate)
+{
+	if (is_on)
+		is_on = 1;
+
+	if (vbus_state == is_on)
+		return;
+	vbus_state = !is_on;		/* 0/1 vs "-1 == unknown/init" */
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+	if (machine_is_davinci_evm()) {
+#ifdef CONFIG_MACH_DAVINCI_EVM_OTG
+		/* modified EVM board switching VBUS with GPIO(6) not I2C
+		 * NOTE:  PINMUX0.RGB888 (bit23) must be clear
+		 */
+		if (is_on)
+			gpio_set(GPIO(6));
+		else
+			gpio_clear(GPIO(6));
+		immediate = 1;
+#else
+		if (immediate)
+			davinci_i2c_expander_op(0x3a, USB_DRVVBUS, !is_on);
+		else
+			schedule_work(&evm_vbus_work);
+#endif
+	}
+#endif
+	if (immediate)
+		vbus_state = is_on;
+}
+
+static void davinci_set_vbus(struct musb *musb, int is_on)
+{
+	WARN_ON(is_on && is_peripheral_active(musb));
+	davinci_source_power(musb, is_on, 0);
+}
+
+
+#define	POLL_SECONDS	2
+
+static struct timer_list otg_workaround;
+
+static void otg_timer(unsigned long _musb)
+{
+	struct musb		*musb = (void *)_musb;
+	void __iomem		*mregs = musb->mregs;
+	u8			devctl;
+	unsigned long		flags;
+
+	/* We poll because DaVinci's won't expose several OTG-critical
+	* status change events (from the transceiver) otherwise.
+	 */
+	devctl = musb_readb(mregs, MUSB_DEVCTL);
+	DBG(7, "poll devctl %02x (%s)\n", devctl, otg_state_string(musb));
+
+	spin_lock_irqsave(&musb->lock, flags);
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_WAIT_VFALL:
+		/* Wait till VBUS falls below SessionEnd (~0.2V); the 1.3 RTL
+		 * seems to mis-handle session "start" otherwise (or in our
+		 * case "recover"), in routine "VBUS was valid by the time
+		 * VBUSERR got reported during enumeration" cases.
+		 */
+		if (devctl & MUSB_DEVCTL_VBUS) {
+			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			break;
+		}
+		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
+			MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT);
+		break;
+	case OTG_STATE_B_IDLE:
+		if (!is_peripheral_enabled(musb))
+			break;
+
+		/* There's no ID-changed IRQ, so we have no good way to tell
+		 * when to switch to the A-Default state machine (by setting
+		 * the DEVCTL.SESSION flag).
+		 *
+		 * Workaround:  whenever we're in B_IDLE, try setting the
+		 * session flag every few seconds.  If it works, ID was
+		 * grounded and we're now in the A-Default state machine.
+		 *
+		 * NOTE setting the session flag is _supposed_ to trigger
+		 * SRP, but clearly it doesn't.
+		 */
+		musb_writeb(mregs, MUSB_DEVCTL,
+				devctl | MUSB_DEVCTL_SESSION);
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE)
+			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+		else
+			musb->xceiv.state = OTG_STATE_A_IDLE;
+		break;
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static irqreturn_t davinci_interrupt(int irq, void *__hci)
+{
+	unsigned long	flags;
+	irqreturn_t	retval = IRQ_NONE;
+	struct musb	*musb = __hci;
+	void __iomem	*tibase = musb->ctrl_base;
+	u32		tmp;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/* NOTE: DaVinci shadows the Mentor IRQs.  Don't manage them through
+	 * the Mentor registers (except for setup), use the TI ones and EOI.
+	 *
+	 * Docs describe irq "vector" registers asociated with the CPPI and
+	 * USB EOI registers.  These hold a bitmask corresponding to the
+	 * current IRQ, not an irq handler address.  Would using those bits
+	 * resolve some of the races observed in this dispatch code??
+	 */
+
+	/* CPPI interrupts share the same IRQ line, but have their own
+	 * mask, state, "vector", and EOI registers.
+	 */
+	if (is_cppi_enabled()) {
+		u32 cppi_tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
+		u32 cppi_rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
+
+		if (cppi_tx || cppi_rx) {
+			DBG(4, "CPPI IRQ t%x r%x\n", cppi_tx, cppi_rx);
+			cppi_completion(musb, cppi_rx, cppi_tx);
+			retval = IRQ_HANDLED;
+		}
+	}
+
+	/* ack and handle non-CPPI interrupts */
+	tmp = musb_readl(tibase, DAVINCI_USB_INT_SRC_MASKED_REG);
+	musb_writel(tibase, DAVINCI_USB_INT_SRC_CLR_REG, tmp);
+	DBG(4, "IRQ %08x\n", tmp);
+
+	musb->int_rx = (tmp & DAVINCI_USB_RXINT_MASK)
+			>> DAVINCI_USB_RXINT_SHIFT;
+	musb->int_tx = (tmp & DAVINCI_USB_TXINT_MASK)
+			>> DAVINCI_USB_TXINT_SHIFT;
+	musb->int_usb = (tmp & DAVINCI_USB_USBINT_MASK)
+			>> DAVINCI_USB_USBINT_SHIFT;
+
+	/* DRVVBUS irqs are the only proxy we have (a very poor one!) for
+	 * DaVinci's missing ID change IRQ.  We need an ID change IRQ to
+	 * switch appropriately between halves of the OTG state machine.
+	 * Managing DEVCTL.SESSION per Mentor docs requires we know its
+	 * value, but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
+	 * Also, DRVVBUS pulses for SRP (but not at 5V) ...
+	 */
+	if (tmp & (DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT)) {
+		int	drvvbus = musb_readl(tibase, DAVINCI_USB_STAT_REG);
+		void __iomem *mregs = musb->mregs;
+		u8	devctl = musb_readb(mregs, MUSB_DEVCTL);
+		int	err = musb->int_usb & MUSB_INTR_VBUSERROR;
+
+		err = is_host_enabled(musb)
+				&& (musb->int_usb & MUSB_INTR_VBUSERROR);
+		if (err) {
+			/* The Mentor core doesn't debounce VBUS as needed
+			 * to cope with device connect current spikes. This
+			 * means it's not uncommon for bus-powered devices
+			 * to get VBUS errors during enumeration.
+			 *
+			 * This is a workaround, but newer RTL from Mentor
+			 * seems to allow a better one: "re"starting sessions
+			 * without waiting (on EVM, a **long** time) for VBUS
+			 * to stop registering in devctl.
+			 */
+			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+			musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			WARNING("VBUS error workaround (delay coming)\n");
+		} else if (is_host_enabled(musb) && drvvbus) {
+			musb->is_active = 1;
+			MUSB_HST_MODE(musb);
+			musb->xceiv.default_a = 1;
+			musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+			portstate(musb->port1_status |= USB_PORT_STAT_POWER);
+			del_timer(&otg_workaround);
+		} else {
+			musb->is_active = 0;
+			MUSB_DEV_MODE(musb);
+			musb->xceiv.default_a = 0;
+			musb->xceiv.state = OTG_STATE_B_IDLE;
+			portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
+		}
+
+		/* NOTE:  this must complete poweron within 100 msec */
+		davinci_source_power(musb, drvvbus, 0);
+		DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
+				drvvbus ? "on" : "off",
+				otg_state_string(musb),
+				err ? " ERROR" : "",
+				devctl);
+		retval = IRQ_HANDLED;
+	}
+
+	if (musb->int_tx || musb->int_rx || musb->int_usb)
+		retval |= musb_interrupt(musb);
+
+	/* irq stays asserted until EOI is written */
+	musb_writel(tibase, DAVINCI_USB_EOI_REG, 0);
+
+	/* poll for ID change */
+	if (is_otg_enabled(musb)
+			&& musb->xceiv.state == OTG_STATE_B_IDLE)
+		mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	/* REVISIT we sometimes get unhandled IRQs
+	 * (e.g. ep0).  not clear why...
+	 */
+	if (retval != IRQ_HANDLED)
+		DBG(5, "unhandled? %08x\n", tmp);
+	return IRQ_HANDLED;
+}
+
+int __init musb_platform_init(struct musb *musb)
+{
+	void __iomem	*tibase = musb->ctrl_base;
+	u32		revision;
+
+	musb->mregs += DAVINCI_BASE_OFFSET;
+#if 0
+	/* REVISIT there's something odd about clocking, this
+	 * didn't appear do the job ...
+	 */
+	musb->clock = clk_get(pDevice, "usb");
+	if (IS_ERR(musb->clock))
+		return PTR_ERR(musb->clock);
+
+	status = clk_enable(musb->clock);
+	if (status < 0)
+		return -ENODEV;
+#endif
+
+	/* returns zero if e.g. not clocked */
+	revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
+	if (revision == 0)
+		return -ENODEV;
+
+	if (is_host_enabled(musb))
+		setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
+
+	musb->board_set_vbus = davinci_set_vbus;
+	davinci_source_power(musb, 0, 1);
+
+	/* reset the controller */
+	musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
+
+	/* start the on-chip PHY and its PLL */
+	phy_on();
+
+	msleep(5);
+
+	/* NOTE:  irqs are in mixed mode, not bypass to pure-musb */
+	pr_debug("DaVinci OTG revision %08x phy %03x control %02x\n",
+		revision, __raw_readl((void __force __iomem *)
+				IO_ADDRESS(USBPHY_CTL_PADDR)),
+		musb_readb(tibase, DAVINCI_USB_CTRL_REG));
+
+	musb->isr = davinci_interrupt;
+	return 0;
+}
+
+int musb_platform_exit(struct musb *musb)
+{
+	if (is_host_enabled(musb))
+		del_timer_sync(&otg_workaround);
+
+	davinci_source_power(musb, 0 /*off*/, 1);
+
+	/* delay, to avoid problems with module reload */
+	if (is_host_enabled(musb) && musb->xceiv.default_a) {
+		int	maxdelay = 30;
+		u8	devctl, warn = 0;
+
+		/* if there's no peripheral connected, this can take a
+		 * long time to fall, especially on EVM with huge C133.
+		 */
+		do {
+			devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+			if (!(devctl & MUSB_DEVCTL_VBUS))
+				break;
+			if ((devctl & MUSB_DEVCTL_VBUS) != warn) {
+				warn = devctl & MUSB_DEVCTL_VBUS;
+				DBG(1, "VBUS %d\n",
+					warn >> MUSB_DEVCTL_VBUS_SHIFT);
+			}
+			msleep(1000);
+			maxdelay--;
+		} while (maxdelay > 0);
+
+		/* in OTG mode, another host might be connected */
+		if (devctl & MUSB_DEVCTL_VBUS)
+			DBG(1, "VBUS off timeout (devctl %02x)\n", devctl);
+	}
+
+	phy_off();
+	return 0;
+}
diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h
new file mode 100644
index 000000000000..7fb6238e270f
--- /dev/null
+++ b/drivers/usb/musb/davinci.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ */
+
+#ifndef __MUSB_HDRDF_H__
+#define __MUSB_HDRDF_H__
+
+/*
+ * DaVinci-specific definitions
+ */
+
+/* Integrated highspeed/otg PHY */
+#define	USBPHY_CTL_PADDR	(DAVINCI_SYSTEM_MODULE_BASE + 0x34)
+#define	USBPHY_PHYCLKGD		(1 << 8)
+#define	USBPHY_SESNDEN		(1 << 7)	/* v(sess_end) comparator */
+#define	USBPHY_VBDTCTEN		(1 << 6)	/* v(bus) comparator */
+#define	USBPHY_PHYPLLON		(1 << 4)	/* override pll suspend */
+#define	USBPHY_CLKO1SEL		(1 << 3)
+#define	USBPHY_OSCPDWN		(1 << 2)
+#define	USBPHY_PHYPDWN		(1 << 0)
+
+/* For now include usb OTG module registers here */
+#define DAVINCI_USB_VERSION_REG		0x00
+#define DAVINCI_USB_CTRL_REG		0x04
+#define DAVINCI_USB_STAT_REG		0x08
+#define DAVINCI_RNDIS_REG		0x10
+#define DAVINCI_AUTOREQ_REG		0x14
+#define DAVINCI_USB_INT_SOURCE_REG	0x20
+#define DAVINCI_USB_INT_SET_REG		0x24
+#define DAVINCI_USB_INT_SRC_CLR_REG	0x28
+#define DAVINCI_USB_INT_MASK_REG	0x2c
+#define DAVINCI_USB_INT_MASK_SET_REG	0x30
+#define DAVINCI_USB_INT_MASK_CLR_REG	0x34
+#define DAVINCI_USB_INT_SRC_MASKED_REG	0x38
+#define DAVINCI_USB_EOI_REG		0x3c
+#define DAVINCI_USB_EOI_INTVEC		0x40
+
+/* BEGIN CPPI-generic (?) */
+
+/* CPPI related registers */
+#define DAVINCI_TXCPPI_CTRL_REG		0x80
+#define DAVINCI_TXCPPI_TEAR_REG		0x84
+#define DAVINCI_CPPI_EOI_REG		0x88
+#define DAVINCI_CPPI_INTVEC_REG		0x8c
+#define DAVINCI_TXCPPI_MASKED_REG	0x90
+#define DAVINCI_TXCPPI_RAW_REG		0x94
+#define DAVINCI_TXCPPI_INTENAB_REG	0x98
+#define DAVINCI_TXCPPI_INTCLR_REG	0x9c
+
+#define DAVINCI_RXCPPI_CTRL_REG		0xC0
+#define DAVINCI_RXCPPI_MASKED_REG	0xD0
+#define DAVINCI_RXCPPI_RAW_REG		0xD4
+#define DAVINCI_RXCPPI_INTENAB_REG	0xD8
+#define DAVINCI_RXCPPI_INTCLR_REG	0xDC
+
+#define DAVINCI_RXCPPI_BUFCNT0_REG	0xE0
+#define DAVINCI_RXCPPI_BUFCNT1_REG	0xE4
+#define DAVINCI_RXCPPI_BUFCNT2_REG	0xE8
+#define DAVINCI_RXCPPI_BUFCNT3_REG	0xEC
+
+/* CPPI state RAM entries */
+#define DAVINCI_CPPI_STATERAM_BASE_OFFSET   0x100
+
+#define DAVINCI_TXCPPI_STATERAM_OFFSET(chnum) \
+	(DAVINCI_CPPI_STATERAM_BASE_OFFSET +       ((chnum) * 0x40))
+#define DAVINCI_RXCPPI_STATERAM_OFFSET(chnum) \
+	(DAVINCI_CPPI_STATERAM_BASE_OFFSET + 0x20 + ((chnum) * 0x40))
+
+/* CPPI masks */
+#define DAVINCI_DMA_CTRL_ENABLE		1
+#define DAVINCI_DMA_CTRL_DISABLE	0
+
+#define DAVINCI_DMA_ALL_CHANNELS_ENABLE	0xF
+#define DAVINCI_DMA_ALL_CHANNELS_DISABLE 0xF
+
+/* END CPPI-generic (?) */
+
+#define DAVINCI_USB_TX_ENDPTS_MASK	0x1f		/* ep0 + 4 tx */
+#define DAVINCI_USB_RX_ENDPTS_MASK	0x1e		/* 4 rx */
+
+#define DAVINCI_USB_USBINT_SHIFT	16
+#define DAVINCI_USB_TXINT_SHIFT		0
+#define DAVINCI_USB_RXINT_SHIFT		8
+
+#define DAVINCI_INTR_DRVVBUS		0x0100
+
+#define DAVINCI_USB_USBINT_MASK		0x01ff0000	/* 8 Mentor, DRVVBUS */
+#define DAVINCI_USB_TXINT_MASK \
+	(DAVINCI_USB_TX_ENDPTS_MASK << DAVINCI_USB_TXINT_SHIFT)
+#define DAVINCI_USB_RXINT_MASK \
+	(DAVINCI_USB_RX_ENDPTS_MASK << DAVINCI_USB_RXINT_SHIFT)
+
+#define DAVINCI_BASE_OFFSET		0x400
+
+#endif	/* __MUSB_HDRDF_H__ */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
new file mode 100644
index 000000000000..462586d06da9
--- /dev/null
+++ b/drivers/usb/musb/musb_core.c
@@ -0,0 +1,2266 @@
+/*
+ * MUSB OTG driver core code
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/*
+ * Inventra (Multipoint) Dual-Role Controller Driver for Linux.
+ *
+ * This consists of a Host Controller Driver (HCD) and a peripheral
+ * controller driver implementing the "Gadget" API; OTG support is
+ * in the works.  These are normal Linux-USB controller drivers which
+ * use IRQs and have no dedicated thread.
+ *
+ * This version of the driver has only been used with products from
+ * Texas Instruments.  Those products integrate the Inventra logic
+ * with other DMA, IRQ, and bus modules, as well as other logic that
+ * needs to be reflected in this driver.
+ *
+ *
+ * NOTE:  the original Mentor code here was pretty much a collection
+ * of mechanisms that don't seem to have been fully integrated/working
+ * for *any* Linux kernel version.  This version aims at Linux 2.6.now,
+ * Key open issues include:
+ *
+ *  - Lack of host-side transaction scheduling, for all transfer types.
+ *    The hardware doesn't do it; instead, software must.
+ *
+ *    This is not an issue for OTG devices that don't support external
+ *    hubs, but for more "normal" USB hosts it's a user issue that the
+ *    "multipoint" support doesn't scale in the expected ways.  That
+ *    includes DaVinci EVM in a common non-OTG mode.
+ *
+ *      * Control and bulk use dedicated endpoints, and there's as
+ *        yet no mechanism to either (a) reclaim the hardware when
+ *        peripherals are NAKing, which gets complicated with bulk
+ *        endpoints, or (b) use more than a single bulk endpoint in
+ *        each direction.
+ *
+ *        RESULT:  one device may be perceived as blocking another one.
+ *
+ *      * Interrupt and isochronous will dynamically allocate endpoint
+ *        hardware, but (a) there's no record keeping for bandwidth;
+ *        (b) in the common case that few endpoints are available, there
+ *        is no mechanism to reuse endpoints to talk to multiple devices.
+ *
+ *        RESULT:  At one extreme, bandwidth can be overcommitted in
+ *        some hardware configurations, no faults will be reported.
+ *        At the other extreme, the bandwidth capabilities which do
+ *        exist tend to be severely undercommitted.  You can't yet hook
+ *        up both a keyboard and a mouse to an external USB hub.
+ */
+
+/*
+ * This gets many kinds of configuration information:
+ *	- Kconfig for everything user-configurable
+ *	- <asm/arch/hdrc_cnf.h> for SOC or family details
+ *	- platform_device for addressing, irq, and platform_data
+ *	- platform_data is mostly for board-specific informarion
+ *
+ * Most of the conditional compilation will (someday) vanish.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#ifdef	CONFIG_ARM
+#include <asm/arch/hardware.h>
+#include <asm/arch/memory.h>
+#include <asm/mach-types.h>
+#endif
+
+#include "musb_core.h"
+
+
+#ifdef CONFIG_ARCH_DAVINCI
+#include "davinci.h"
+#endif
+
+
+
+#if MUSB_DEBUG > 0
+unsigned debug = MUSB_DEBUG;
+module_param(debug, uint, 0);
+MODULE_PARM_DESC(debug, "initial debug message level");
+
+#define MUSB_VERSION_SUFFIX	"/dbg"
+#endif
+
+#define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
+#define DRIVER_DESC "Inventra Dual-Role USB Controller Driver"
+
+#define MUSB_VERSION_BASE "6.0"
+
+#ifndef MUSB_VERSION_SUFFIX
+#define MUSB_VERSION_SUFFIX	""
+#endif
+#define MUSB_VERSION	MUSB_VERSION_BASE MUSB_VERSION_SUFFIX
+
+#define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
+
+#define MUSB_DRIVER_NAME "musb_hdrc"
+const char musb_driver_name[] = MUSB_DRIVER_NAME;
+
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
+
+
+/*-------------------------------------------------------------------------*/
+
+static inline struct musb *dev_to_musb(struct device *dev)
+{
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	/* usbcore insists dev->driver_data is a "struct hcd *" */
+	return hcd_to_musb(dev_get_drvdata(dev));
+#else
+	return dev_get_drvdata(dev);
+#endif
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifndef CONFIG_USB_TUSB6010
+/*
+ * Load an endpoint's FIFO
+ */
+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
+{
+	void __iomem *fifo = hw_ep->fifo;
+
+	prefetch((u8 *)src);
+
+	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+			'T', hw_ep->epnum, fifo, len, src);
+
+	/* we can't assume unaligned reads work */
+	if (likely((0x01 & (unsigned long) src) == 0)) {
+		u16	index = 0;
+
+		/* best case is 32bit-aligned source address */
+		if ((0x02 & (unsigned long) src) == 0) {
+			if (len >= 4) {
+				writesl(fifo, src + index, len >> 2);
+				index += len & ~0x03;
+			}
+			if (len & 0x02) {
+				musb_writew(fifo, 0, *(u16 *)&src[index]);
+				index += 2;
+			}
+		} else {
+			if (len >= 2) {
+				writesw(fifo, src + index, len >> 1);
+				index += len & ~0x01;
+			}
+		}
+		if (len & 0x01)
+			musb_writeb(fifo, 0, src[index]);
+	} else  {
+		/* byte aligned */
+		writesb(fifo, src, len);
+	}
+}
+
+/*
+ * Unload an endpoint's FIFO
+ */
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+	void __iomem *fifo = hw_ep->fifo;
+
+	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+			'R', hw_ep->epnum, fifo, len, dst);
+
+	/* we can't assume unaligned writes work */
+	if (likely((0x01 & (unsigned long) dst) == 0)) {
+		u16	index = 0;
+
+		/* best case is 32bit-aligned destination address */
+		if ((0x02 & (unsigned long) dst) == 0) {
+			if (len >= 4) {
+				readsl(fifo, dst, len >> 2);
+				index = len & ~0x03;
+			}
+			if (len & 0x02) {
+				*(u16 *)&dst[index] = musb_readw(fifo, 0);
+				index += 2;
+			}
+		} else {
+			if (len >= 2) {
+				readsw(fifo, dst, len >> 1);
+				index = len & ~0x01;
+			}
+		}
+		if (len & 0x01)
+			dst[index] = musb_readb(fifo, 0);
+	} else  {
+		/* byte aligned */
+		readsb(fifo, dst, len);
+	}
+}
+
+#endif	/* normal PIO */
+
+
+/*-------------------------------------------------------------------------*/
+
+/* for high speed test mode; see USB 2.0 spec 7.1.20 */
+static const u8 musb_test_packet[53] = {
+	/* implicit SYNC then DATA0 to start */
+
+	/* JKJKJKJK x9 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* JJKKJJKK x8 */
+	0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+	/* JJJJKKKK x8 */
+	0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee,
+	/* JJJJJJJKKKKKKK x8 */
+	0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	/* JJJJJJJK x8 */
+	0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd,
+	/* JKKKKKKK x10, JK */
+	0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e
+
+	/* implicit CRC16 then EOP to end */
+};
+
+void musb_load_testpacket(struct musb *musb)
+{
+	void __iomem	*regs = musb->endpoints[0].regs;
+
+	musb_ep_select(musb->mregs, 0);
+	musb_write_fifo(musb->control_ep,
+			sizeof(musb_test_packet), musb_test_packet);
+	musb_writew(regs, MUSB_CSR0, MUSB_CSR0_TXPKTRDY);
+}
+
+/*-------------------------------------------------------------------------*/
+
+const char *otg_state_string(struct musb *musb)
+{
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_IDLE:		return "a_idle";
+	case OTG_STATE_A_WAIT_VRISE:	return "a_wait_vrise";
+	case OTG_STATE_A_WAIT_BCON:	return "a_wait_bcon";
+	case OTG_STATE_A_HOST:		return "a_host";
+	case OTG_STATE_A_SUSPEND:	return "a_suspend";
+	case OTG_STATE_A_PERIPHERAL:	return "a_peripheral";
+	case OTG_STATE_A_WAIT_VFALL:	return "a_wait_vfall";
+	case OTG_STATE_A_VBUS_ERR:	return "a_vbus_err";
+	case OTG_STATE_B_IDLE:		return "b_idle";
+	case OTG_STATE_B_SRP_INIT:	return "b_srp_init";
+	case OTG_STATE_B_PERIPHERAL:	return "b_peripheral";
+	case OTG_STATE_B_WAIT_ACON:	return "b_wait_acon";
+	case OTG_STATE_B_HOST:		return "b_host";
+	default:			return "UNDEFINED";
+	}
+}
+
+#ifdef	CONFIG_USB_MUSB_OTG
+
+/*
+ * See also USB_OTG_1-3.pdf 6.6.5 Timers
+ * REVISIT: Are the other timers done in the hardware?
+ */
+#define TB_ASE0_BRST		100	/* Min 3.125 ms */
+
+/*
+ * Handles OTG hnp timeouts, such as b_ase0_brst
+ */
+void musb_otg_timer_func(unsigned long data)
+{
+	struct musb	*musb = (struct musb *)data;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	switch (musb->xceiv.state) {
+	case OTG_STATE_B_WAIT_ACON:
+		DBG(1, "HNP: b_wait_acon timeout; back to b_peripheral\n");
+		musb_g_disconnect(musb);
+		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		musb->is_active = 0;
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		DBG(1, "HNP: a_wait_bcon timeout; back to a_host\n");
+		musb_hnp_stop(musb);
+		break;
+	default:
+		DBG(1, "HNP: Unhandled mode %s\n", otg_state_string(musb));
+	}
+	musb->ignore_disconnect = 0;
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static DEFINE_TIMER(musb_otg_timer, musb_otg_timer_func, 0, 0);
+
+/*
+ * Stops the B-device HNP state. Caller must take care of locking.
+ */
+void musb_hnp_stop(struct musb *musb)
+{
+	struct usb_hcd	*hcd = musb_to_hcd(musb);
+	void __iomem	*mbase = musb->mregs;
+	u8	reg;
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_PERIPHERAL:
+	case OTG_STATE_A_WAIT_VFALL:
+	case OTG_STATE_A_WAIT_BCON:
+		DBG(1, "HNP: Switching back to A-host\n");
+		musb_g_disconnect(musb);
+		musb->xceiv.state = OTG_STATE_A_IDLE;
+		MUSB_HST_MODE(musb);
+		musb->is_active = 0;
+		break;
+	case OTG_STATE_B_HOST:
+		DBG(1, "HNP: Disabling HR\n");
+		hcd->self.is_b_host = 0;
+		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		MUSB_DEV_MODE(musb);
+		reg = musb_readb(mbase, MUSB_POWER);
+		reg |= MUSB_POWER_SUSPENDM;
+		musb_writeb(mbase, MUSB_POWER, reg);
+		/* REVISIT: Start SESSION_REQUEST here? */
+		break;
+	default:
+		DBG(1, "HNP: Stopping in unknown state %s\n",
+			otg_state_string(musb));
+	}
+
+	/*
+	 * When returning to A state after HNP, avoid hub_port_rebounce(),
+	 * which cause occasional OPT A "Did not receive reset after connect"
+	 * errors.
+	 */
+	musb->port1_status &=
+		~(1 << USB_PORT_FEAT_C_CONNECTION);
+}
+
+#endif
+
+/*
+ * Interrupt Service Routine to record USB "global" interrupts.
+ * Since these do not happen often and signify things of
+ * paramount importance, it seems OK to check them individually;
+ * the order of the tests is specified in the manual
+ *
+ * @param musb instance pointer
+ * @param int_usb register contents
+ * @param devctl
+ * @param power
+ */
+
+#define STAGE0_MASK (MUSB_INTR_RESUME | MUSB_INTR_SESSREQ \
+		| MUSB_INTR_VBUSERROR | MUSB_INTR_CONNECT \
+		| MUSB_INTR_RESET)
+
+static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
+				u8 devctl, u8 power)
+{
+	irqreturn_t handled = IRQ_NONE;
+	void __iomem *mbase = musb->mregs;
+
+	DBG(3, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl,
+		int_usb);
+
+	/* in host mode, the peripheral may issue remote wakeup.
+	 * in peripheral mode, the host may resume the link.
+	 * spurious RESUME irqs happen too, paired with SUSPEND.
+	 */
+	if (int_usb & MUSB_INTR_RESUME) {
+		handled = IRQ_HANDLED;
+		DBG(3, "RESUME (%s)\n", otg_state_string(musb));
+
+		if (devctl & MUSB_DEVCTL_HM) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+			switch (musb->xceiv.state) {
+			case OTG_STATE_A_SUSPEND:
+				/* remote wakeup?  later, GetPortStatus
+				 * will stop RESUME signaling
+				 */
+
+				if (power & MUSB_POWER_SUSPENDM) {
+					/* spurious */
+					musb->int_usb &= ~MUSB_INTR_SUSPEND;
+					DBG(2, "Spurious SUSPENDM\n");
+					break;
+				}
+
+				power &= ~MUSB_POWER_SUSPENDM;
+				musb_writeb(mbase, MUSB_POWER,
+						power | MUSB_POWER_RESUME);
+
+				musb->port1_status |=
+						(USB_PORT_STAT_C_SUSPEND << 16)
+						| MUSB_PORT_STAT_RESUME;
+				musb->rh_timer = jiffies
+						+ msecs_to_jiffies(20);
+
+				musb->xceiv.state = OTG_STATE_A_HOST;
+				musb->is_active = 1;
+				usb_hcd_resume_root_hub(musb_to_hcd(musb));
+				break;
+			case OTG_STATE_B_WAIT_ACON:
+				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				musb->is_active = 1;
+				MUSB_DEV_MODE(musb);
+				break;
+			default:
+				WARNING("bogus %s RESUME (%s)\n",
+					"host",
+					otg_state_string(musb));
+			}
+#endif
+		} else {
+			switch (musb->xceiv.state) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+			case OTG_STATE_A_SUSPEND:
+				/* possibly DISCONNECT is upcoming */
+				musb->xceiv.state = OTG_STATE_A_HOST;
+				usb_hcd_resume_root_hub(musb_to_hcd(musb));
+				break;
+#endif
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+			case OTG_STATE_B_WAIT_ACON:
+			case OTG_STATE_B_PERIPHERAL:
+				/* disconnect while suspended?  we may
+				 * not get a disconnect irq...
+				 */
+				if ((devctl & MUSB_DEVCTL_VBUS)
+						!= (3 << MUSB_DEVCTL_VBUS_SHIFT)
+						) {
+					musb->int_usb |= MUSB_INTR_DISCONNECT;
+					musb->int_usb &= ~MUSB_INTR_SUSPEND;
+					break;
+				}
+				musb_g_resume(musb);
+				break;
+			case OTG_STATE_B_IDLE:
+				musb->int_usb &= ~MUSB_INTR_SUSPEND;
+				break;
+#endif
+			default:
+				WARNING("bogus %s RESUME (%s)\n",
+					"peripheral",
+					otg_state_string(musb));
+			}
+		}
+	}
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	/* see manual for the order of the tests */
+	if (int_usb & MUSB_INTR_SESSREQ) {
+		DBG(1, "SESSION_REQUEST (%s)\n", otg_state_string(musb));
+
+		/* IRQ arrives from ID pin sense or (later, if VBUS power
+		 * is removed) SRP.  responses are time critical:
+		 *  - turn on VBUS (with silicon-specific mechanism)
+		 *  - go through A_WAIT_VRISE
+		 *  - ... to A_WAIT_BCON.
+		 * a_wait_vrise_tmout triggers VBUS_ERROR transitions
+		 */
+		musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+		musb->ep0_stage = MUSB_EP0_START;
+		musb->xceiv.state = OTG_STATE_A_IDLE;
+		MUSB_HST_MODE(musb);
+		musb_set_vbus(musb, 1);
+
+		handled = IRQ_HANDLED;
+	}
+
+	if (int_usb & MUSB_INTR_VBUSERROR) {
+		int	ignore = 0;
+
+		/* During connection as an A-Device, we may see a short
+		 * current spikes causing voltage drop, because of cable
+		 * and peripheral capacitance combined with vbus draw.
+		 * (So: less common with truly self-powered devices, where
+		 * vbus doesn't act like a power supply.)
+		 *
+		 * Such spikes are short; usually less than ~500 usec, max
+		 * of ~2 msec.  That is, they're not sustained overcurrent
+		 * errors, though they're reported using VBUSERROR irqs.
+		 *
+		 * Workarounds:  (a) hardware: use self powered devices.
+		 * (b) software:  ignore non-repeated VBUS errors.
+		 *
+		 * REVISIT:  do delays from lots of DEBUG_KERNEL checks
+		 * make trouble here, keeping VBUS < 4.4V ?
+		 */
+		switch (musb->xceiv.state) {
+		case OTG_STATE_A_HOST:
+			/* recovery is dicey once we've gotten past the
+			 * initial stages of enumeration, but if VBUS
+			 * stayed ok at the other end of the link, and
+			 * another reset is due (at least for high speed,
+			 * to redo the chirp etc), it might work OK...
+			 */
+		case OTG_STATE_A_WAIT_BCON:
+		case OTG_STATE_A_WAIT_VRISE:
+			if (musb->vbuserr_retry) {
+				musb->vbuserr_retry--;
+				ignore = 1;
+				devctl |= MUSB_DEVCTL_SESSION;
+				musb_writeb(mbase, MUSB_DEVCTL, devctl);
+			} else {
+				musb->port1_status |=
+					  (1 << USB_PORT_FEAT_OVER_CURRENT)
+					| (1 << USB_PORT_FEAT_C_OVER_CURRENT);
+			}
+			break;
+		default:
+			break;
+		}
+
+		DBG(1, "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
+				otg_state_string(musb),
+				devctl,
+				({ char *s;
+				switch (devctl & MUSB_DEVCTL_VBUS) {
+				case 0 << MUSB_DEVCTL_VBUS_SHIFT:
+					s = "<SessEnd"; break;
+				case 1 << MUSB_DEVCTL_VBUS_SHIFT:
+					s = "<AValid"; break;
+				case 2 << MUSB_DEVCTL_VBUS_SHIFT:
+					s = "<VBusValid"; break;
+				/* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */
+				default:
+					s = "VALID"; break;
+				}; s; }),
+				VBUSERR_RETRY_COUNT - musb->vbuserr_retry,
+				musb->port1_status);
+
+		/* go through A_WAIT_VFALL then start a new session */
+		if (!ignore)
+			musb_set_vbus(musb, 0);
+		handled = IRQ_HANDLED;
+	}
+
+	if (int_usb & MUSB_INTR_CONNECT) {
+		struct usb_hcd *hcd = musb_to_hcd(musb);
+
+		handled = IRQ_HANDLED;
+		musb->is_active = 1;
+		set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+		musb->ep0_stage = MUSB_EP0_START;
+
+#ifdef CONFIG_USB_MUSB_OTG
+		/* flush endpoints when transitioning from Device Mode */
+		if (is_peripheral_active(musb)) {
+			/* REVISIT HNP; just force disconnect */
+		}
+		musb_writew(mbase, MUSB_INTRTXE, musb->epmask);
+		musb_writew(mbase, MUSB_INTRRXE, musb->epmask & 0xfffe);
+		musb_writeb(mbase, MUSB_INTRUSBE, 0xf7);
+#endif
+		musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
+					|USB_PORT_STAT_HIGH_SPEED
+					|USB_PORT_STAT_ENABLE
+					);
+		musb->port1_status |= USB_PORT_STAT_CONNECTION
+					|(USB_PORT_STAT_C_CONNECTION << 16);
+
+		/* high vs full speed is just a guess until after reset */
+		if (devctl & MUSB_DEVCTL_LSDEV)
+			musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
+
+		if (hcd->status_urb)
+			usb_hcd_poll_rh_status(hcd);
+		else
+			usb_hcd_resume_root_hub(hcd);
+
+		MUSB_HST_MODE(musb);
+
+		/* indicate new connection to OTG machine */
+		switch (musb->xceiv.state) {
+		case OTG_STATE_B_PERIPHERAL:
+			if (int_usb & MUSB_INTR_SUSPEND) {
+				DBG(1, "HNP: SUSPEND+CONNECT, now b_host\n");
+				musb->xceiv.state = OTG_STATE_B_HOST;
+				hcd->self.is_b_host = 1;
+				int_usb &= ~MUSB_INTR_SUSPEND;
+			} else
+				DBG(1, "CONNECT as b_peripheral???\n");
+			break;
+		case OTG_STATE_B_WAIT_ACON:
+			DBG(1, "HNP: Waiting to switch to b_host state\n");
+			musb->xceiv.state = OTG_STATE_B_HOST;
+			hcd->self.is_b_host = 1;
+			break;
+		default:
+			if ((devctl & MUSB_DEVCTL_VBUS)
+					== (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
+				musb->xceiv.state = OTG_STATE_A_HOST;
+				hcd->self.is_b_host = 0;
+			}
+			break;
+		}
+		DBG(1, "CONNECT (%s) devctl %02x\n",
+				otg_state_string(musb), devctl);
+	}
+#endif	/* CONFIG_USB_MUSB_HDRC_HCD */
+
+	/* mentor saves a bit: bus reset and babble share the same irq.
+	 * only host sees babble; only peripheral sees bus reset.
+	 */
+	if (int_usb & MUSB_INTR_RESET) {
+		if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) {
+			/*
+			 * Looks like non-HS BABBLE can be ignored, but
+			 * HS BABBLE is an error condition. For HS the solution
+			 * is to avoid babble in the first place and fix what
+			 * caused BABBLE. When HS BABBLE happens we can only
+			 * stop the session.
+			 */
+			if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV))
+				DBG(1, "BABBLE devctl: %02x\n", devctl);
+			else {
+				ERR("Stopping host session -- babble\n");
+				musb_writeb(mbase, MUSB_DEVCTL, 0);
+			}
+		} else if (is_peripheral_capable()) {
+			DBG(1, "BUS RESET as %s\n", otg_state_string(musb));
+			switch (musb->xceiv.state) {
+#ifdef CONFIG_USB_OTG
+			case OTG_STATE_A_SUSPEND:
+				/* We need to ignore disconnect on suspend
+				 * otherwise tusb 2.0 won't reconnect after a
+				 * power cycle, which breaks otg compliance.
+				 */
+				musb->ignore_disconnect = 1;
+				musb_g_reset(musb);
+				/* FALLTHROUGH */
+			case OTG_STATE_A_WAIT_BCON:	/* OPT TD.4.7-900ms */
+				DBG(1, "HNP: Setting timer as %s\n",
+						otg_state_string(musb));
+				musb_otg_timer.data = (unsigned long)musb;
+				mod_timer(&musb_otg_timer, jiffies
+					+ msecs_to_jiffies(100));
+				break;
+			case OTG_STATE_A_PERIPHERAL:
+				musb_hnp_stop(musb);
+				break;
+			case OTG_STATE_B_WAIT_ACON:
+				DBG(1, "HNP: RESET (%s), to b_peripheral\n",
+					otg_state_string(musb));
+				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				musb_g_reset(musb);
+				break;
+#endif
+			case OTG_STATE_B_IDLE:
+				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				/* FALLTHROUGH */
+			case OTG_STATE_B_PERIPHERAL:
+				musb_g_reset(musb);
+				break;
+			default:
+				DBG(1, "Unhandled BUS RESET as %s\n",
+					otg_state_string(musb));
+			}
+		}
+
+		handled = IRQ_HANDLED;
+	}
+	schedule_work(&musb->irq_work);
+
+	return handled;
+}
+
+/*
+ * Interrupt Service Routine to record USB "global" interrupts.
+ * Since these do not happen often and signify things of
+ * paramount importance, it seems OK to check them individually;
+ * the order of the tests is specified in the manual
+ *
+ * @param musb instance pointer
+ * @param int_usb register contents
+ * @param devctl
+ * @param power
+ */
+static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
+				u8 devctl, u8 power)
+{
+	irqreturn_t handled = IRQ_NONE;
+
+#if 0
+/* REVISIT ... this would be for multiplexing periodic endpoints, or
+ * supporting transfer phasing to prevent exceeding ISO bandwidth
+ * limits of a given frame or microframe.
+ *
+ * It's not needed for peripheral side, which dedicates endpoints;
+ * though it _might_ use SOF irqs for other purposes.
+ *
+ * And it's not currently needed for host side, which also dedicates
+ * endpoints, relies on TX/RX interval registers, and isn't claimed
+ * to support ISO transfers yet.
+ */
+	if (int_usb & MUSB_INTR_SOF) {
+		void __iomem *mbase = musb->mregs;
+		struct musb_hw_ep	*ep;
+		u8 epnum;
+		u16 frame;
+
+		DBG(6, "START_OF_FRAME\n");
+		handled = IRQ_HANDLED;
+
+		/* start any periodic Tx transfers waiting for current frame */
+		frame = musb_readw(mbase, MUSB_FRAME);
+		ep = musb->endpoints;
+		for (epnum = 1; (epnum < musb->nr_endpoints)
+					&& (musb->epmask >= (1 << epnum));
+				epnum++, ep++) {
+			/*
+			 * FIXME handle framecounter wraps (12 bits)
+			 * eliminate duplicated StartUrb logic
+			 */
+			if (ep->dwWaitFrame >= frame) {
+				ep->dwWaitFrame = 0;
+				pr_debug("SOF --> periodic TX%s on %d\n",
+					ep->tx_channel ? " DMA" : "",
+					epnum);
+				if (!ep->tx_channel)
+					musb_h_tx_start(musb, epnum);
+				else
+					cppi_hostdma_start(musb, epnum);
+			}
+		}		/* end of for loop */
+	}
+#endif
+
+	if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
+		DBG(1, "DISCONNECT (%s) as %s, devctl %02x\n",
+				otg_state_string(musb),
+				MUSB_MODE(musb), devctl);
+		handled = IRQ_HANDLED;
+
+		switch (musb->xceiv.state) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		case OTG_STATE_A_HOST:
+		case OTG_STATE_A_SUSPEND:
+			musb_root_disconnect(musb);
+			if (musb->a_wait_bcon != 0)
+				musb_platform_try_idle(musb, jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon));
+			break;
+#endif	/* HOST */
+#ifdef CONFIG_USB_MUSB_OTG
+		case OTG_STATE_B_HOST:
+			musb_hnp_stop(musb);
+			break;
+		case OTG_STATE_A_PERIPHERAL:
+			musb_hnp_stop(musb);
+			musb_root_disconnect(musb);
+			/* FALLTHROUGH */
+		case OTG_STATE_B_WAIT_ACON:
+			/* FALLTHROUGH */
+#endif	/* OTG */
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+		case OTG_STATE_B_PERIPHERAL:
+		case OTG_STATE_B_IDLE:
+			musb_g_disconnect(musb);
+			break;
+#endif	/* GADGET */
+		default:
+			WARNING("unhandled DISCONNECT transition (%s)\n",
+				otg_state_string(musb));
+			break;
+		}
+
+		schedule_work(&musb->irq_work);
+	}
+
+	if (int_usb & MUSB_INTR_SUSPEND) {
+		DBG(1, "SUSPEND (%s) devctl %02x power %02x\n",
+				otg_state_string(musb), devctl, power);
+		handled = IRQ_HANDLED;
+
+		switch (musb->xceiv.state) {
+#ifdef	CONFIG_USB_MUSB_OTG
+		case OTG_STATE_A_PERIPHERAL:
+			/*
+			 * We cannot stop HNP here, devctl BDEVICE might be
+			 * still set.
+			 */
+			break;
+#endif
+		case OTG_STATE_B_PERIPHERAL:
+			musb_g_suspend(musb);
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv.gadget->b_hnp_enable;
+			if (musb->is_active) {
+#ifdef	CONFIG_USB_MUSB_OTG
+				musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+				DBG(1, "HNP: Setting timer for b_ase0_brst\n");
+				musb_otg_timer.data = (unsigned long)musb;
+				mod_timer(&musb_otg_timer, jiffies
+					+ msecs_to_jiffies(TB_ASE0_BRST));
+#endif
+			}
+			break;
+		case OTG_STATE_A_WAIT_BCON:
+			if (musb->a_wait_bcon != 0)
+				musb_platform_try_idle(musb, jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon));
+			break;
+		case OTG_STATE_A_HOST:
+			musb->xceiv.state = OTG_STATE_A_SUSPEND;
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv.host->b_hnp_enable;
+			break;
+		case OTG_STATE_B_HOST:
+			/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
+			DBG(1, "REVISIT: SUSPEND as B_HOST\n");
+			break;
+		default:
+			/* "should not happen" */
+			musb->is_active = 0;
+			break;
+		}
+		schedule_work(&musb->irq_work);
+	}
+
+
+	return handled;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+* Program the HDRC to start (enable interrupts, dma, etc.).
+*/
+void musb_start(struct musb *musb)
+{
+	void __iomem	*regs = musb->mregs;
+	u8		devctl = musb_readb(regs, MUSB_DEVCTL);
+
+	DBG(2, "<== devctl %02x\n", devctl);
+
+	/*  Set INT enable registers, enable interrupts */
+	musb_writew(regs, MUSB_INTRTXE, musb->epmask);
+	musb_writew(regs, MUSB_INTRRXE, musb->epmask & 0xfffe);
+	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
+
+	musb_writeb(regs, MUSB_TESTMODE, 0);
+
+	/* put into basic highspeed mode and start session */
+	musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
+						| MUSB_POWER_SOFTCONN
+						| MUSB_POWER_HSENAB
+						/* ENSUSPEND wedges tusb */
+						/* | MUSB_POWER_ENSUSPEND */
+						);
+
+	musb->is_active = 0;
+	devctl = musb_readb(regs, MUSB_DEVCTL);
+	devctl &= ~MUSB_DEVCTL_SESSION;
+
+	if (is_otg_enabled(musb)) {
+		/* session started after:
+		 * (a) ID-grounded irq, host mode;
+		 * (b) vbus present/connect IRQ, peripheral mode;
+		 * (c) peripheral initiates, using SRP
+		 */
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->is_active = 1;
+		else
+			devctl |= MUSB_DEVCTL_SESSION;
+
+	} else if (is_host_enabled(musb)) {
+		/* assume ID pin is hard-wired to ground */
+		devctl |= MUSB_DEVCTL_SESSION;
+
+	} else /* peripheral is enabled */ {
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->is_active = 1;
+	}
+	musb_platform_enable(musb);
+	musb_writeb(regs, MUSB_DEVCTL, devctl);
+}
+
+
+static void musb_generic_disable(struct musb *musb)
+{
+	void __iomem	*mbase = musb->mregs;
+	u16	temp;
+
+	/* disable interrupts */
+	musb_writeb(mbase, MUSB_INTRUSBE, 0);
+	musb_writew(mbase, MUSB_INTRTXE, 0);
+	musb_writew(mbase, MUSB_INTRRXE, 0);
+
+	/* off */
+	musb_writeb(mbase, MUSB_DEVCTL, 0);
+
+	/*  flush pending interrupts */
+	temp = musb_readb(mbase, MUSB_INTRUSB);
+	temp = musb_readw(mbase, MUSB_INTRTX);
+	temp = musb_readw(mbase, MUSB_INTRRX);
+
+}
+
+/*
+ * Make the HDRC stop (disable interrupts, etc.);
+ * reversible by musb_start
+ * called on gadget driver unregister
+ * with controller locked, irqs blocked
+ * acts as a NOP unless some role activated the hardware
+ */
+void musb_stop(struct musb *musb)
+{
+	/* stop IRQs, timers, ... */
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+	DBG(3, "HDRC disabled\n");
+
+	/* FIXME
+	 *  - mark host and/or peripheral drivers unusable/inactive
+	 *  - disable DMA (and enable it in HdrcStart)
+	 *  - make sure we can musb_start() after musb_stop(); with
+	 *    OTG mode, gadget driver module rmmod/modprobe cycles that
+	 *  - ...
+	 */
+	musb_platform_try_idle(musb, 0);
+}
+
+static void musb_shutdown(struct platform_device *pdev)
+{
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+	if (musb->clock) {
+		clk_put(musb->clock);
+		musb->clock = NULL;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	/* FIXME power down */
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * The silicon either has hard-wired endpoint configurations, or else
+ * "dynamic fifo" sizing.  The driver has support for both, though at this
+ * writing only the dynamic sizing is very well tested.   We use normal
+ * idioms to so both modes are compile-tested, but dead code elimination
+ * leaves only the relevant one in the object file.
+ *
+ * We don't currently use dynamic fifo setup capability to do anything
+ * more than selecting one of a bunch of predefined configurations.
+ */
+#ifdef MUSB_C_DYNFIFO_DEF
+#define	can_dynfifo()	1
+#else
+#define	can_dynfifo()	0
+#endif
+
+#if defined(CONFIG_USB_TUSB6010) || \
+	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+static ushort __initdata fifo_mode = 4;
+#else
+static ushort __initdata fifo_mode = 2;
+#endif
+
+/* "modprobe ... fifo_mode=1" etc */
+module_param(fifo_mode, ushort, 0);
+MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
+
+
+#define DYN_FIFO_SIZE (1<<(MUSB_C_RAM_BITS+2))
+
+enum fifo_style { FIFO_RXTX, FIFO_TX, FIFO_RX } __attribute__ ((packed));
+enum buf_mode { BUF_SINGLE, BUF_DOUBLE } __attribute__ ((packed));
+
+struct fifo_cfg {
+	u8		hw_ep_num;
+	enum fifo_style	style;
+	enum buf_mode	mode;
+	u16		maxpacket;
+};
+
+/*
+ * tables defining fifo_mode values.  define more if you like.
+ * for host side, make sure both halves of ep1 are set up.
+ */
+
+/* mode 0 - fits in 2KB */
+static struct fifo_cfg __initdata mode_0_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 1 - fits in 4KB */
+static struct fifo_cfg __initdata mode_1_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 2 - fits in 4KB */
+static struct fifo_cfg __initdata mode_2_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 3 - fits in 4KB */
+static struct fifo_cfg __initdata mode_3_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 4 - fits in 16KB */
+static struct fifo_cfg __initdata mode_4_cfg[] = {
+{ .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 13, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 13, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
+{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
+};
+
+
+/*
+ * configure a fifo; for non-shared endpoints, this may be called
+ * once for a tx fifo and once for an rx fifo.
+ *
+ * returns negative errno or offset for next fifo.
+ */
+static int __init
+fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
+		const struct fifo_cfg *cfg, u16 offset)
+{
+	void __iomem	*mbase = musb->mregs;
+	int	size = 0;
+	u16	maxpacket = cfg->maxpacket;
+	u16	c_off = offset >> 3;
+	u8	c_size;
+
+	/* expect hw_ep has already been zero-initialized */
+
+	size = ffs(max(maxpacket, (u16) 8)) - 1;
+	maxpacket = 1 << size;
+
+	c_size = size - 3;
+	if (cfg->mode == BUF_DOUBLE) {
+		if ((offset + (maxpacket << 1)) > DYN_FIFO_SIZE)
+			return -EMSGSIZE;
+		c_size |= MUSB_FIFOSZ_DPB;
+	} else {
+		if ((offset + maxpacket) > DYN_FIFO_SIZE)
+			return -EMSGSIZE;
+	}
+
+	/* configure the FIFO */
+	musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum);
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	/* EP0 reserved endpoint for control, bidirectional;
+	 * EP1 reserved for bulk, two unidirection halves.
+	 */
+	if (hw_ep->epnum == 1)
+		musb->bulk_ep = hw_ep;
+	/* REVISIT error check:  be sure ep0 can both rx and tx ... */
+#endif
+	switch (cfg->style) {
+	case FIFO_TX:
+		musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_TXFIFOADD, c_off);
+		hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_tx = maxpacket;
+		break;
+	case FIFO_RX:
+		musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_RXFIFOADD, c_off);
+		hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_rx = maxpacket;
+		break;
+	case FIFO_RXTX:
+		musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_TXFIFOADD, c_off);
+		hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_rx = maxpacket;
+
+		musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_RXFIFOADD, c_off);
+		hw_ep->tx_double_buffered = hw_ep->rx_double_buffered;
+		hw_ep->max_packet_sz_tx = maxpacket;
+
+		hw_ep->is_shared_fifo = true;
+		break;
+	}
+
+	/* NOTE rx and tx endpoint irqs aren't managed separately,
+	 * which happens to be ok
+	 */
+	musb->epmask |= (1 << hw_ep->epnum);
+
+	return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
+}
+
+static struct fifo_cfg __initdata ep0_cfg = {
+	.style = FIFO_RXTX, .maxpacket = 64,
+};
+
+static int __init ep_config_from_table(struct musb *musb)
+{
+	const struct fifo_cfg	*cfg;
+	unsigned		i, n;
+	int			offset;
+	struct musb_hw_ep	*hw_ep = musb->endpoints;
+
+	switch (fifo_mode) {
+	default:
+		fifo_mode = 0;
+		/* FALLTHROUGH */
+	case 0:
+		cfg = mode_0_cfg;
+		n = ARRAY_SIZE(mode_0_cfg);
+		break;
+	case 1:
+		cfg = mode_1_cfg;
+		n = ARRAY_SIZE(mode_1_cfg);
+		break;
+	case 2:
+		cfg = mode_2_cfg;
+		n = ARRAY_SIZE(mode_2_cfg);
+		break;
+	case 3:
+		cfg = mode_3_cfg;
+		n = ARRAY_SIZE(mode_3_cfg);
+		break;
+	case 4:
+		cfg = mode_4_cfg;
+		n = ARRAY_SIZE(mode_4_cfg);
+		break;
+	}
+
+	printk(KERN_DEBUG "%s: setup fifo_mode %d\n",
+			musb_driver_name, fifo_mode);
+
+
+	offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0);
+	/* assert(offset > 0) */
+
+	/* NOTE:  for RTL versions >= 1.400 EPINFO and RAMINFO would
+	 * be better than static MUSB_C_NUM_EPS and DYN_FIFO_SIZE...
+	 */
+
+	for (i = 0; i < n; i++) {
+		u8	epn = cfg->hw_ep_num;
+
+		if (epn >= MUSB_C_NUM_EPS) {
+			pr_debug("%s: invalid ep %d\n",
+					musb_driver_name, epn);
+			continue;
+		}
+		offset = fifo_setup(musb, hw_ep + epn, cfg++, offset);
+		if (offset < 0) {
+			pr_debug("%s: mem overrun, ep %d\n",
+					musb_driver_name, epn);
+			return -EINVAL;
+		}
+		epn++;
+		musb->nr_endpoints = max(epn, musb->nr_endpoints);
+	}
+
+	printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n",
+			musb_driver_name,
+			n + 1, MUSB_C_NUM_EPS * 2 - 1,
+			offset, DYN_FIFO_SIZE);
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	if (!musb->bulk_ep) {
+		pr_debug("%s: missing bulk\n", musb_driver_name);
+		return -EINVAL;
+	}
+#endif
+
+	return 0;
+}
+
+
+/*
+ * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
+ * @param musb the controller
+ */
+static int __init ep_config_from_hw(struct musb *musb)
+{
+	u8 epnum = 0, reg;
+	struct musb_hw_ep *hw_ep;
+	void *mbase = musb->mregs;
+
+	DBG(2, "<== static silicon ep config\n");
+
+	/* FIXME pick up ep0 maxpacket size */
+
+	for (epnum = 1; epnum < MUSB_C_NUM_EPS; epnum++) {
+		musb_ep_select(mbase, epnum);
+		hw_ep = musb->endpoints + epnum;
+
+		/* read from core using indexed model */
+		reg = musb_readb(hw_ep->regs, 0x10 + MUSB_FIFOSIZE);
+		if (!reg) {
+			/* 0's returned when no more endpoints */
+			break;
+		}
+		musb->nr_endpoints++;
+		musb->epmask |= (1 << epnum);
+
+		hw_ep->max_packet_sz_tx = 1 << (reg & 0x0f);
+
+		/* shared TX/RX FIFO? */
+		if ((reg & 0xf0) == 0xf0) {
+			hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx;
+			hw_ep->is_shared_fifo = true;
+			continue;
+		} else {
+			hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4);
+			hw_ep->is_shared_fifo = false;
+		}
+
+		/* FIXME set up hw_ep->{rx,tx}_double_buffered */
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		/* pick an RX/TX endpoint for bulk */
+		if (hw_ep->max_packet_sz_tx < 512
+				|| hw_ep->max_packet_sz_rx < 512)
+			continue;
+
+		/* REVISIT:  this algorithm is lazy, we should at least
+		 * try to pick a double buffered endpoint.
+		 */
+		if (musb->bulk_ep)
+			continue;
+		musb->bulk_ep = hw_ep;
+#endif
+	}
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	if (!musb->bulk_ep) {
+		pr_debug("%s: missing bulk\n", musb_driver_name);
+		return -EINVAL;
+	}
+#endif
+
+	return 0;
+}
+
+enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
+
+/* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
+ * configure endpoints, or take their config from silicon
+ */
+static int __init musb_core_init(u16 musb_type, struct musb *musb)
+{
+#ifdef MUSB_AHB_ID
+	u32 data;
+#endif
+	u8 reg;
+	char *type;
+	u16 hwvers, rev_major, rev_minor;
+	char aInfo[78], aRevision[32], aDate[12];
+	void __iomem	*mbase = musb->mregs;
+	int		status = 0;
+	int		i;
+
+	/* log core options (read using indexed model) */
+	musb_ep_select(mbase, 0);
+	reg = musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
+
+	strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
+	if (reg & MUSB_CONFIGDATA_DYNFIFO)
+		strcat(aInfo, ", dyn FIFOs");
+	if (reg & MUSB_CONFIGDATA_MPRXE) {
+		strcat(aInfo, ", bulk combine");
+#ifdef C_MP_RX
+		musb->bulk_combine = true;
+#else
+		strcat(aInfo, " (X)");		/* no driver support */
+#endif
+	}
+	if (reg & MUSB_CONFIGDATA_MPTXE) {
+		strcat(aInfo, ", bulk split");
+#ifdef C_MP_TX
+		musb->bulk_split = true;
+#else
+		strcat(aInfo, " (X)");		/* no driver support */
+#endif
+	}
+	if (reg & MUSB_CONFIGDATA_HBRXE) {
+		strcat(aInfo, ", HB-ISO Rx");
+		strcat(aInfo, " (X)");		/* no driver support */
+	}
+	if (reg & MUSB_CONFIGDATA_HBTXE) {
+		strcat(aInfo, ", HB-ISO Tx");
+		strcat(aInfo, " (X)");		/* no driver support */
+	}
+	if (reg & MUSB_CONFIGDATA_SOFTCONE)
+		strcat(aInfo, ", SoftConn");
+
+	printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n",
+			musb_driver_name, reg, aInfo);
+
+#ifdef MUSB_AHB_ID
+	data = musb_readl(mbase, 0x404);
+	sprintf(aDate, "%04d-%02x-%02x", (data & 0xffff),
+		(data >> 16) & 0xff, (data >> 24) & 0xff);
+	/* FIXME ID2 and ID3 are unused */
+	data = musb_readl(mbase, 0x408);
+	printk(KERN_DEBUG "ID2=%lx\n", (long unsigned)data);
+	data = musb_readl(mbase, 0x40c);
+	printk(KERN_DEBUG "ID3=%lx\n", (long unsigned)data);
+	reg = musb_readb(mbase, 0x400);
+	musb_type = ('M' == reg) ? MUSB_CONTROLLER_MHDRC : MUSB_CONTROLLER_HDRC;
+#else
+	aDate[0] = 0;
+#endif
+	if (MUSB_CONTROLLER_MHDRC == musb_type) {
+		musb->is_multipoint = 1;
+		type = "M";
+	} else {
+		musb->is_multipoint = 0;
+		type = "";
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+#ifndef	CONFIG_USB_OTG_BLACKLIST_HUB
+		printk(KERN_ERR
+			"%s: kernel must blacklist external hubs\n",
+			musb_driver_name);
+#endif
+#endif
+	}
+
+	/* log release info */
+	hwvers = musb_readw(mbase, MUSB_HWVERS);
+	rev_major = (hwvers >> 10) & 0x1f;
+	rev_minor = hwvers & 0x3ff;
+	snprintf(aRevision, 32, "%d.%d%s", rev_major,
+		rev_minor, (hwvers & 0x8000) ? "RC" : "");
+	printk(KERN_DEBUG "%s: %sHDRC RTL version %s %s\n",
+			musb_driver_name, type, aRevision, aDate);
+
+	/* configure ep0 */
+	musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
+	musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
+
+	/* discover endpoint configuration */
+	musb->nr_endpoints = 1;
+	musb->epmask = 1;
+
+	if (reg & MUSB_CONFIGDATA_DYNFIFO) {
+		if (can_dynfifo())
+			status = ep_config_from_table(musb);
+		else {
+			ERR("reconfigure software for Dynamic FIFOs\n");
+			status = -ENODEV;
+		}
+	} else {
+		if (!can_dynfifo())
+			status = ep_config_from_hw(musb);
+		else {
+			ERR("reconfigure software for static FIFOs\n");
+			return -ENODEV;
+		}
+	}
+
+	if (status < 0)
+		return status;
+
+	/* finish init, and print endpoint config */
+	for (i = 0; i < musb->nr_endpoints; i++) {
+		struct musb_hw_ep	*hw_ep = musb->endpoints + i;
+
+		hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase;
+#ifdef CONFIG_USB_TUSB6010
+		hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i);
+		hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i);
+		hw_ep->fifo_sync_va =
+			musb->sync_va + 0x400 + MUSB_FIFO_OFFSET(i);
+
+		if (i == 0)
+			hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF;
+		else
+			hw_ep->conf = mbase + 0x400 + (((i - 1) & 0xf) << 2);
+#endif
+
+		hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase;
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		hw_ep->target_regs = MUSB_BUSCTL_OFFSET(i, 0) + mbase;
+		hw_ep->rx_reinit = 1;
+		hw_ep->tx_reinit = 1;
+#endif
+
+		if (hw_ep->max_packet_sz_tx) {
+			printk(KERN_DEBUG
+				"%s: hw_ep %d%s, %smax %d\n",
+				musb_driver_name, i,
+				hw_ep->is_shared_fifo ? "shared" : "tx",
+				hw_ep->tx_double_buffered
+					? "doublebuffer, " : "",
+				hw_ep->max_packet_sz_tx);
+		}
+		if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) {
+			printk(KERN_DEBUG
+				"%s: hw_ep %d%s, %smax %d\n",
+				musb_driver_name, i,
+				"rx",
+				hw_ep->rx_double_buffered
+					? "doublebuffer, " : "",
+				hw_ep->max_packet_sz_rx);
+		}
+		if (!(hw_ep->max_packet_sz_tx || hw_ep->max_packet_sz_rx))
+			DBG(1, "hw_ep %d not configured\n", i);
+	}
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+
+static irqreturn_t generic_interrupt(int irq, void *__hci)
+{
+	unsigned long	flags;
+	irqreturn_t	retval = IRQ_NONE;
+	struct musb	*musb = __hci;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+	if (musb->int_usb || musb->int_tx || musb->int_rx)
+		retval = musb_interrupt(musb);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	/* REVISIT we sometimes get spurious IRQs on g_ep0
+	 * not clear why...
+	 */
+	if (retval != IRQ_HANDLED)
+		DBG(5, "spurious?\n");
+
+	return IRQ_HANDLED;
+}
+
+#else
+#define generic_interrupt	NULL
+#endif
+
+/*
+ * handle all the irqs defined by the HDRC core. for now we expect:  other
+ * irq sources (phy, dma, etc) will be handled first, musb->int_* values
+ * will be assigned, and the irq will already have been acked.
+ *
+ * called in irq context with spinlock held, irqs blocked
+ */
+irqreturn_t musb_interrupt(struct musb *musb)
+{
+	irqreturn_t	retval = IRQ_NONE;
+	u8		devctl, power;
+	int		ep_num;
+	u32		reg;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+	power = musb_readb(musb->mregs, MUSB_POWER);
+
+	DBG(4, "** IRQ %s usb%04x tx%04x rx%04x\n",
+		(devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral",
+		musb->int_usb, musb->int_tx, musb->int_rx);
+
+	/* the core can interrupt us for multiple reasons; docs have
+	 * a generic interrupt flowchart to follow
+	 */
+	if (musb->int_usb & STAGE0_MASK)
+		retval |= musb_stage0_irq(musb, musb->int_usb,
+				devctl, power);
+
+	/* "stage 1" is handling endpoint irqs */
+
+	/* handle endpoint 0 first */
+	if (musb->int_tx & 1) {
+		if (devctl & MUSB_DEVCTL_HM)
+			retval |= musb_h_ep0_irq(musb);
+		else
+			retval |= musb_g_ep0_irq(musb);
+	}
+
+	/* RX on endpoints 1-15 */
+	reg = musb->int_rx >> 1;
+	ep_num = 1;
+	while (reg) {
+		if (reg & 1) {
+			/* musb_ep_select(musb->mregs, ep_num); */
+			/* REVISIT just retval = ep->rx_irq(...) */
+			retval = IRQ_HANDLED;
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_rx(musb, ep_num);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_rx(musb, ep_num);
+			}
+		}
+
+		reg >>= 1;
+		ep_num++;
+	}
+
+	/* TX on endpoints 1-15 */
+	reg = musb->int_tx >> 1;
+	ep_num = 1;
+	while (reg) {
+		if (reg & 1) {
+			/* musb_ep_select(musb->mregs, ep_num); */
+			/* REVISIT just retval |= ep->tx_irq(...) */
+			retval = IRQ_HANDLED;
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_tx(musb, ep_num);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_tx(musb, ep_num);
+			}
+		}
+		reg >>= 1;
+		ep_num++;
+	}
+
+	/* finish handling "global" interrupts after handling fifos */
+	if (musb->int_usb)
+		retval |= musb_stage2_irq(musb,
+				musb->int_usb, devctl, power);
+
+	return retval;
+}
+
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+static int __initdata use_dma = 1;
+
+/* "modprobe ... use_dma=0" etc */
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
+
+void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
+{
+	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	/* called with controller lock already held */
+
+	if (!epnum) {
+#ifndef CONFIG_USB_TUSB_OMAP_DMA
+		if (!is_cppi_enabled()) {
+			/* endpoint 0 */
+			if (devctl & MUSB_DEVCTL_HM)
+				musb_h_ep0_irq(musb);
+			else
+				musb_g_ep0_irq(musb);
+		}
+#endif
+	} else {
+		/* endpoints 1..15 */
+		if (transmit) {
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_tx(musb, epnum);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_tx(musb, epnum);
+			}
+		} else {
+			/* receive */
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_rx(musb, epnum);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_rx(musb, epnum);
+			}
+		}
+	}
+}
+
+#else
+#define use_dma			0
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_SYSFS
+
+static ssize_t
+musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct musb *musb = dev_to_musb(dev);
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = sprintf(buf, "%s\n", otg_state_string(musb));
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return ret;
+}
+
+static ssize_t
+musb_mode_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	if (!strncmp(buf, "host", 4))
+		musb_platform_set_mode(musb, MUSB_HOST);
+	if (!strncmp(buf, "peripheral", 10))
+		musb_platform_set_mode(musb, MUSB_PERIPHERAL);
+	if (!strncmp(buf, "otg", 3))
+		musb_platform_set_mode(musb, MUSB_OTG);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return n;
+}
+static DEVICE_ATTR(mode, 0644, musb_mode_show, musb_mode_store);
+
+static ssize_t
+musb_vbus_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+	unsigned long	val;
+
+	if (sscanf(buf, "%lu", &val) < 1) {
+		printk(KERN_ERR "Invalid VBUS timeout ms value\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb->a_wait_bcon = val;
+	if (musb->xceiv.state == OTG_STATE_A_WAIT_BCON)
+		musb->is_active = 0;
+	musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return n;
+}
+
+static ssize_t
+musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+	unsigned long	val;
+	int		vbus;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	val = musb->a_wait_bcon;
+	vbus = musb_platform_get_vbus_status(musb);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return sprintf(buf, "Vbus %s, timeout %lu\n",
+			vbus ? "on" : "off", val);
+}
+static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store);
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+
+/* Gadget drivers can't know that a host is connected so they might want
+ * to start SRP, but users can.  This allows userspace to trigger SRP.
+ */
+static ssize_t
+musb_srp_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned short	srp;
+
+	if (sscanf(buf, "%hu", &srp) != 1
+			|| (srp != 1)) {
+		printk(KERN_ERR "SRP: Value must be 1\n");
+		return -EINVAL;
+	}
+
+	if (srp == 1)
+		musb_g_wakeup(musb);
+
+	return n;
+}
+static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store);
+
+#endif /* CONFIG_USB_GADGET_MUSB_HDRC */
+
+#endif	/* sysfs */
+
+/* Only used to provide driver mode change events */
+static void musb_irq_work(struct work_struct *data)
+{
+	struct musb *musb = container_of(data, struct musb, irq_work);
+	static int old_state;
+
+	if (musb->xceiv.state != old_state) {
+		old_state = musb->xceiv.state;
+		sysfs_notify(&musb->controller->kobj, NULL, "mode");
+	}
+}
+
+/* --------------------------------------------------------------------------
+ * Init support
+ */
+
+static struct musb *__init
+allocate_instance(struct device *dev, void __iomem *mbase)
+{
+	struct musb		*musb;
+	struct musb_hw_ep	*ep;
+	int			epnum;
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	struct usb_hcd	*hcd;
+
+	hcd = usb_create_hcd(&musb_hc_driver, dev, dev->bus_id);
+	if (!hcd)
+		return NULL;
+	/* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
+
+	musb = hcd_to_musb(hcd);
+	INIT_LIST_HEAD(&musb->control);
+	INIT_LIST_HEAD(&musb->in_bulk);
+	INIT_LIST_HEAD(&musb->out_bulk);
+
+	hcd->uses_new_polling = 1;
+
+	musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+#else
+	musb = kzalloc(sizeof *musb, GFP_KERNEL);
+	if (!musb)
+		return NULL;
+	dev_set_drvdata(dev, musb);
+
+#endif
+
+	musb->mregs = mbase;
+	musb->ctrl_base = mbase;
+	musb->nIrq = -ENODEV;
+	for (epnum = 0, ep = musb->endpoints;
+			epnum < MUSB_C_NUM_EPS;
+			epnum++, ep++) {
+
+		ep->musb = musb;
+		ep->epnum = epnum;
+	}
+
+	musb->controller = dev;
+	return musb;
+}
+
+static void musb_free(struct musb *musb)
+{
+	/* this has multiple entry modes. it handles fault cleanup after
+	 * probe(), where things may be partially set up, as well as rmmod
+	 * cleanup after everything's been de-activated.
+	 */
+
+#ifdef CONFIG_SYSFS
+	device_remove_file(musb->controller, &dev_attr_mode);
+	device_remove_file(musb->controller, &dev_attr_vbus);
+#ifdef CONFIG_USB_MUSB_OTG
+	device_remove_file(musb->controller, &dev_attr_srp);
+#endif
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	musb_gadget_cleanup(musb);
+#endif
+
+	if (musb->nIrq >= 0) {
+		disable_irq_wake(musb->nIrq);
+		free_irq(musb->nIrq, musb);
+	}
+	if (is_dma_capable() && musb->dma_controller) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		(void) c->stop(c);
+		dma_controller_destroy(c);
+	}
+
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	musb_platform_exit(musb);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+
+	if (musb->clock) {
+		clk_disable(musb->clock);
+		clk_put(musb->clock);
+	}
+
+#ifdef CONFIG_USB_MUSB_OTG
+	put_device(musb->xceiv.dev);
+#endif
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	usb_put_hcd(musb_to_hcd(musb));
+#else
+	kfree(musb);
+#endif
+}
+
+/*
+ * Perform generic per-controller initialization.
+ *
+ * @pDevice: the controller (already clocked, etc)
+ * @nIrq: irq
+ * @mregs: virtual address of controller registers,
+ *	not yet corrected for platform-specific offsets
+ */
+static int __init
+musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
+{
+	int			status;
+	struct musb		*musb;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+
+	/* The driver might handle more features than the board; OK.
+	 * Fail when the board needs a feature that's not enabled.
+	 */
+	if (!plat) {
+		dev_dbg(dev, "no platform_data?\n");
+		return -ENODEV;
+	}
+	switch (plat->mode) {
+	case MUSB_HOST:
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		break;
+#else
+		goto bad_config;
+#endif
+	case MUSB_PERIPHERAL:
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+		break;
+#else
+		goto bad_config;
+#endif
+	case MUSB_OTG:
+#ifdef CONFIG_USB_MUSB_OTG
+		break;
+#else
+bad_config:
+#endif
+	default:
+		dev_err(dev, "incompatible Kconfig role setting\n");
+		return -EINVAL;
+	}
+
+	/* allocate */
+	musb = allocate_instance(dev, ctrl);
+	if (!musb)
+		return -ENOMEM;
+
+	spin_lock_init(&musb->lock);
+	musb->board_mode = plat->mode;
+	musb->board_set_power = plat->set_power;
+	musb->set_clock = plat->set_clock;
+	musb->min_power = plat->min_power;
+
+	/* Clock usage is chip-specific ... functional clock (DaVinci,
+	 * OMAP2430), or PHY ref (some TUSB6010 boards).  All this core
+	 * code does is make sure a clock handle is available; platform
+	 * code manages it during start/stop and suspend/resume.
+	 */
+	if (plat->clock) {
+		musb->clock = clk_get(dev, plat->clock);
+		if (IS_ERR(musb->clock)) {
+			status = PTR_ERR(musb->clock);
+			musb->clock = NULL;
+			goto fail;
+		}
+	}
+
+	/* assume vbus is off */
+
+	/* platform adjusts musb->mregs and musb->isr if needed,
+	 * and activates clocks
+	 */
+	musb->isr = generic_interrupt;
+	status = musb_platform_init(musb);
+
+	if (status < 0)
+		goto fail;
+	if (!musb->isr) {
+		status = -ENODEV;
+		goto fail2;
+	}
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+	if (use_dma && dev->dma_mask) {
+		struct dma_controller	*c;
+
+		c = dma_controller_create(musb, musb->mregs);
+		musb->dma_controller = c;
+		if (c)
+			(void) c->start(c);
+	}
+#endif
+	/* ideally this would be abstracted in platform setup */
+	if (!is_dma_capable() || !musb->dma_controller)
+		dev->dma_mask = NULL;
+
+	/* be sure interrupts are disabled before connecting ISR */
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+
+	/* setup musb parts of the core (especially endpoints) */
+	status = musb_core_init(plat->multipoint
+			? MUSB_CONTROLLER_MHDRC
+			: MUSB_CONTROLLER_HDRC, musb);
+	if (status < 0)
+		goto fail2;
+
+	/* Init IRQ workqueue before request_irq */
+	INIT_WORK(&musb->irq_work, musb_irq_work);
+
+	/* attach to the IRQ */
+	if (request_irq(nIrq, musb->isr, 0, dev->bus_id, musb)) {
+		dev_err(dev, "request_irq %d failed!\n", nIrq);
+		status = -ENODEV;
+		goto fail2;
+	}
+	musb->nIrq = nIrq;
+/* FIXME this handles wakeup irqs wrong */
+	if (enable_irq_wake(nIrq) == 0)
+		device_init_wakeup(dev, 1);
+
+	pr_info("%s: USB %s mode controller at %p using %s, IRQ %d\n",
+			musb_driver_name,
+			({char *s;
+			switch (musb->board_mode) {
+			case MUSB_HOST:		s = "Host"; break;
+			case MUSB_PERIPHERAL:	s = "Peripheral"; break;
+			default:		s = "OTG"; break;
+			}; s; }),
+			ctrl,
+			(is_dma_capable() && musb->dma_controller)
+				? "DMA" : "PIO",
+			musb->nIrq);
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	/* host side needs more setup, except for no-host modes */
+	if (musb->board_mode != MUSB_PERIPHERAL) {
+		struct usb_hcd	*hcd = musb_to_hcd(musb);
+
+		if (musb->board_mode == MUSB_OTG)
+			hcd->self.otg_port = 1;
+		musb->xceiv.host = &hcd->self;
+		hcd->power_budget = 2 * (plat->power ? : 250);
+	}
+#endif				/* CONFIG_USB_MUSB_HDRC_HCD */
+
+	/* For the host-only role, we can activate right away.
+	 * (We expect the ID pin to be forcibly grounded!!)
+	 * Otherwise, wait till the gadget driver hooks up.
+	 */
+	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
+		MUSB_HST_MODE(musb);
+		musb->xceiv.default_a = 1;
+		musb->xceiv.state = OTG_STATE_A_IDLE;
+
+		status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+
+		DBG(1, "%s mode, status %d, devctl %02x %c\n",
+			"HOST", status,
+			musb_readb(musb->mregs, MUSB_DEVCTL),
+			(musb_readb(musb->mregs, MUSB_DEVCTL)
+					& MUSB_DEVCTL_BDEVICE
+				? 'B' : 'A'));
+
+	} else /* peripheral is enabled */ {
+		MUSB_DEV_MODE(musb);
+		musb->xceiv.default_a = 0;
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+
+		status = musb_gadget_setup(musb);
+
+		DBG(1, "%s mode, status %d, dev%02x\n",
+			is_otg_enabled(musb) ? "OTG" : "PERIPHERAL",
+			status,
+			musb_readb(musb->mregs, MUSB_DEVCTL));
+
+	}
+
+	if (status == 0)
+		musb_debug_create("driver/musb_hdrc", musb);
+	else {
+fail:
+		if (musb->clock)
+			clk_put(musb->clock);
+		device_init_wakeup(dev, 0);
+		musb_free(musb);
+		return status;
+	}
+
+#ifdef CONFIG_SYSFS
+	status = device_create_file(dev, &dev_attr_mode);
+	status = device_create_file(dev, &dev_attr_vbus);
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	status = device_create_file(dev, &dev_attr_srp);
+#endif /* CONFIG_USB_GADGET_MUSB_HDRC */
+	status = 0;
+#endif
+
+	return status;
+
+fail2:
+	musb_platform_exit(musb);
+	goto fail;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just
+ * bridge to a platform device; this driver then suffices.
+ */
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+static u64	*orig_dma_mask;
+#endif
+
+static int __init musb_probe(struct platform_device *pdev)
+{
+	struct device	*dev = &pdev->dev;
+	int		irq = platform_get_irq(pdev, 0);
+	struct resource	*iomem;
+	void __iomem	*base;
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem || irq == 0)
+		return -ENODEV;
+
+	base = ioremap(iomem->start, iomem->end - iomem->start + 1);
+	if (!base) {
+		dev_err(dev, "ioremap failed\n");
+		return -ENOMEM;
+	}
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+	/* clobbered by use_dma=n */
+	orig_dma_mask = dev->dma_mask;
+#endif
+	return musb_init_controller(dev, irq, base);
+}
+
+static int __devexit musb_remove(struct platform_device *pdev)
+{
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+	void __iomem	*ctrl_base = musb->ctrl_base;
+
+	/* this gets called on rmmod.
+	 *  - Host mode: host may still be active
+	 *  - Peripheral mode: peripheral is deactivated (or never-activated)
+	 *  - OTG mode: both roles are deactivated (or never-activated)
+	 */
+	musb_shutdown(pdev);
+	musb_debug_delete("driver/musb_hdrc", musb);
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	if (musb->board_mode == MUSB_HOST)
+		usb_remove_hcd(musb_to_hcd(musb));
+#endif
+	musb_free(musb);
+	iounmap(ctrl_base);
+	device_init_wakeup(&pdev->dev, 0);
+#ifndef CONFIG_MUSB_PIO_ONLY
+	pdev->dev.dma_mask = orig_dma_mask;
+#endif
+	return 0;
+}
+
+#ifdef	CONFIG_PM
+
+static int musb_suspend(struct platform_device *pdev, pm_message_t message)
+{
+	unsigned long	flags;
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+
+	if (!musb->clock)
+		return 0;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (is_peripheral_active(musb)) {
+		/* FIXME force disconnect unless we know USB will wake
+		 * the system up quickly enough to respond ...
+		 */
+	} else if (is_host_active(musb)) {
+		/* we know all the children are suspended; sometimes
+		 * they will even be wakeup-enabled.
+		 */
+	}
+
+	if (musb->set_clock)
+		musb->set_clock(musb->clock, 0);
+	else
+		clk_disable(musb->clock);
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return 0;
+}
+
+static int musb_resume(struct platform_device *pdev)
+{
+	unsigned long	flags;
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+
+	if (!musb->clock)
+		return 0;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb->set_clock)
+		musb->set_clock(musb->clock, 1);
+	else
+		clk_enable(musb->clock);
+
+	/* for static cmos like DaVinci, register values were preserved
+	 * unless for some reason the whole soc powered down and we're
+	 * not treating that as a whole-system restart (e.g. swsusp)
+	 */
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return 0;
+}
+
+#else
+#define	musb_suspend	NULL
+#define	musb_resume	NULL
+#endif
+
+static struct platform_driver musb_driver = {
+	.driver = {
+		.name		= (char *)musb_driver_name,
+		.bus		= &platform_bus_type,
+		.owner		= THIS_MODULE,
+	},
+	.remove		= __devexit_p(musb_remove),
+	.shutdown	= musb_shutdown,
+	.suspend	= musb_suspend,
+	.resume		= musb_resume,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init musb_init(void)
+{
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	if (usb_disabled())
+		return 0;
+#endif
+
+	pr_info("%s: version " MUSB_VERSION ", "
+#ifdef CONFIG_MUSB_PIO_ONLY
+		"pio"
+#elif defined(CONFIG_USB_TI_CPPI_DMA)
+		"cppi-dma"
+#elif defined(CONFIG_USB_INVENTRA_DMA)
+		"musb-dma"
+#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
+		"tusb-omap-dma"
+#else
+		"?dma?"
+#endif
+		", "
+#ifdef CONFIG_USB_MUSB_OTG
+		"otg (peripheral+host)"
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+		"peripheral"
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+		"host"
+#endif
+		", debug=%d\n",
+		musb_driver_name, debug);
+	return platform_driver_probe(&musb_driver, musb_probe);
+}
+
+/* make us init after usbcore and before usb
+ * gadget and host-side drivers start to register
+ */
+subsys_initcall(musb_init);
+
+static void __exit musb_cleanup(void)
+{
+	platform_driver_unregister(&musb_driver);
+}
+module_exit(musb_cleanup);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
new file mode 100644
index 000000000000..90035c12ab5f
--- /dev/null
+++ b/drivers/usb/musb/musb_core.h
@@ -0,0 +1,517 @@
+/*
+ * MUSB OTG driver defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_CORE_H__
+#define __MUSB_CORE_H__
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/musb.h>
+
+struct musb;
+struct musb_hw_ep;
+struct musb_ep;
+
+
+#include "musb_debug.h"
+#include "musb_dma.h"
+
+#ifdef CONFIG_USB_MUSB_SOC
+/*
+ * Get core configuration from a header converted (by cfg_conv)
+ * from the Verilog config file generated by the core config utility
+ *
+ * For now we assume that header is provided along with other
+ * arch-specific files.  Discrete chips will need a build tweak.
+ * So will using AHB IDs from silicon that provides them.
+ */
+#include <asm/arch/hdrc_cnf.h>
+#endif
+
+#include "musb_io.h"
+#include "musb_regs.h"
+
+#include "musb_gadget.h"
+#include "../core/hcd.h"
+#include "musb_host.h"
+
+
+
+#ifdef CONFIG_USB_MUSB_OTG
+
+#define	is_peripheral_enabled(musb)	((musb)->board_mode != MUSB_HOST)
+#define	is_host_enabled(musb)		((musb)->board_mode != MUSB_PERIPHERAL)
+#define	is_otg_enabled(musb)		((musb)->board_mode == MUSB_OTG)
+
+/* NOTE:  otg and peripheral-only state machines start at B_IDLE.
+ * OTG or host-only go to A_IDLE when ID is sensed.
+ */
+#define is_peripheral_active(m)		(!(m)->is_host)
+#define is_host_active(m)		((m)->is_host)
+
+#else
+#define	is_peripheral_enabled(musb)	is_peripheral_capable()
+#define	is_host_enabled(musb)		is_host_capable()
+#define	is_otg_enabled(musb)		0
+
+#define	is_peripheral_active(musb)	is_peripheral_capable()
+#define	is_host_active(musb)		is_host_capable()
+#endif
+
+#if defined(CONFIG_USB_MUSB_OTG) || defined(CONFIG_USB_MUSB_PERIPHERAL)
+/* for some reason, the "select USB_GADGET_MUSB_HDRC" doesn't always
+ * override that choice selection (often USB_GADGET_DUMMY_HCD).
+ */
+#ifndef CONFIG_USB_GADGET_MUSB_HDRC
+#error bogus Kconfig output ... select CONFIG_USB_GADGET_MUSB_HDRC
+#endif
+#endif	/* need MUSB gadget selection */
+
+
+#ifdef CONFIG_PROC_FS
+#include <linux/fs.h>
+#define MUSB_CONFIG_PROC_FS
+#endif
+
+/****************************** PERIPHERAL ROLE *****************************/
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+
+#define	is_peripheral_capable()	(1)
+
+extern irqreturn_t musb_g_ep0_irq(struct musb *);
+extern void musb_g_tx(struct musb *, u8);
+extern void musb_g_rx(struct musb *, u8);
+extern void musb_g_reset(struct musb *);
+extern void musb_g_suspend(struct musb *);
+extern void musb_g_resume(struct musb *);
+extern void musb_g_wakeup(struct musb *);
+extern void musb_g_disconnect(struct musb *);
+
+#else
+
+#define	is_peripheral_capable()	(0)
+
+static inline irqreturn_t musb_g_ep0_irq(struct musb *m) { return IRQ_NONE; }
+static inline void musb_g_reset(struct musb *m) {}
+static inline void musb_g_suspend(struct musb *m) {}
+static inline void musb_g_resume(struct musb *m) {}
+static inline void musb_g_wakeup(struct musb *m) {}
+static inline void musb_g_disconnect(struct musb *m) {}
+
+#endif
+
+/****************************** HOST ROLE ***********************************/
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+
+#define	is_host_capable()	(1)
+
+extern irqreturn_t musb_h_ep0_irq(struct musb *);
+extern void musb_host_tx(struct musb *, u8);
+extern void musb_host_rx(struct musb *, u8);
+
+#else
+
+#define	is_host_capable()	(0)
+
+static inline irqreturn_t musb_h_ep0_irq(struct musb *m) { return IRQ_NONE; }
+static inline void musb_host_tx(struct musb *m, u8 e) {}
+static inline void musb_host_rx(struct musb *m, u8 e) {}
+
+#endif
+
+
+/****************************** CONSTANTS ********************************/
+
+#ifndef MUSB_C_NUM_EPS
+#define MUSB_C_NUM_EPS ((u8)16)
+#endif
+
+#ifndef MUSB_MAX_END0_PACKET
+#define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE)
+#endif
+
+/* host side ep0 states */
+enum musb_h_ep0_state {
+	MUSB_EP0_IDLE,
+	MUSB_EP0_START,			/* expect ack of setup */
+	MUSB_EP0_IN,			/* expect IN DATA */
+	MUSB_EP0_OUT,			/* expect ack of OUT DATA */
+	MUSB_EP0_STATUS,		/* expect ack of STATUS */
+} __attribute__ ((packed));
+
+/* peripheral side ep0 states */
+enum musb_g_ep0_state {
+	MUSB_EP0_STAGE_SETUP,		/* idle, waiting for setup */
+	MUSB_EP0_STAGE_TX,		/* IN data */
+	MUSB_EP0_STAGE_RX,		/* OUT data */
+	MUSB_EP0_STAGE_STATUSIN,	/* (after OUT data) */
+	MUSB_EP0_STAGE_STATUSOUT,	/* (after IN data) */
+	MUSB_EP0_STAGE_ACKWAIT,		/* after zlp, before statusin */
+} __attribute__ ((packed));
+
+/* OTG protocol constants */
+#define OTG_TIME_A_WAIT_VRISE	100		/* msec (max) */
+#define OTG_TIME_A_WAIT_BCON	0		/* 0=infinite; min 1000 msec */
+#define OTG_TIME_A_IDLE_BDIS	200		/* msec (min) */
+
+/*************************** REGISTER ACCESS ********************************/
+
+/* Endpoint registers (other than dynfifo setup) can be accessed either
+ * directly with the "flat" model, or after setting up an index register.
+ */
+
+#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_ARCH_OMAP2430) \
+		|| defined(CONFIG_ARCH_OMAP3430)
+/* REVISIT indexed access seemed to
+ * misbehave (on DaVinci) for at least peripheral IN ...
+ */
+#define	MUSB_FLAT_REG
+#endif
+
+/* TUSB mapping: "flat" plus ep0 special cases */
+#if	defined(CONFIG_USB_TUSB6010)
+#define musb_ep_select(_mbase, _epnum) \
+	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
+#define	MUSB_EP_OFFSET			MUSB_TUSB_OFFSET
+
+/* "flat" mapping: each endpoint has its own i/o address */
+#elif	defined(MUSB_FLAT_REG)
+#define musb_ep_select(_mbase, _epnum)	(((void)(_mbase)), ((void)(_epnum)))
+#define	MUSB_EP_OFFSET			MUSB_FLAT_OFFSET
+
+/* "indexed" mapping: INDEX register controls register bank select */
+#else
+#define musb_ep_select(_mbase, _epnum) \
+	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
+#define	MUSB_EP_OFFSET			MUSB_INDEXED_OFFSET
+#endif
+
+/****************************** FUNCTIONS ********************************/
+
+#define MUSB_HST_MODE(_musb)\
+	{ (_musb)->is_host = true; }
+#define MUSB_DEV_MODE(_musb) \
+	{ (_musb)->is_host = false; }
+
+#define test_devctl_hst_mode(_x) \
+	(musb_readb((_x)->mregs, MUSB_DEVCTL)&MUSB_DEVCTL_HM)
+
+#define MUSB_MODE(musb) ((musb)->is_host ? "Host" : "Peripheral")
+
+/******************************** TYPES *************************************/
+
+/*
+ * struct musb_hw_ep - endpoint hardware (bidirectional)
+ *
+ * Ordered slightly for better cacheline locality.
+ */
+struct musb_hw_ep {
+	struct musb		*musb;
+	void __iomem		*fifo;
+	void __iomem		*regs;
+
+#ifdef CONFIG_USB_TUSB6010
+	void __iomem		*conf;
+#endif
+
+	/* index in musb->endpoints[]  */
+	u8			epnum;
+
+	/* hardware configuration, possibly dynamic */
+	bool			is_shared_fifo;
+	bool			tx_double_buffered;
+	bool			rx_double_buffered;
+	u16			max_packet_sz_tx;
+	u16			max_packet_sz_rx;
+
+	struct dma_channel	*tx_channel;
+	struct dma_channel	*rx_channel;
+
+#ifdef CONFIG_USB_TUSB6010
+	/* TUSB has "asynchronous" and "synchronous" dma modes */
+	dma_addr_t		fifo_async;
+	dma_addr_t		fifo_sync;
+	void __iomem		*fifo_sync_va;
+#endif
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	void __iomem		*target_regs;
+
+	/* currently scheduled peripheral endpoint */
+	struct musb_qh		*in_qh;
+	struct musb_qh		*out_qh;
+
+	u8			rx_reinit;
+	u8			tx_reinit;
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	/* peripheral side */
+	struct musb_ep		ep_in;			/* TX */
+	struct musb_ep		ep_out;			/* RX */
+#endif
+};
+
+static inline struct usb_request *next_in_request(struct musb_hw_ep *hw_ep)
+{
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	return next_request(&hw_ep->ep_in);
+#else
+	return NULL;
+#endif
+}
+
+static inline struct usb_request *next_out_request(struct musb_hw_ep *hw_ep)
+{
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	return next_request(&hw_ep->ep_out);
+#else
+	return NULL;
+#endif
+}
+
+/*
+ * struct musb - Driver instance data.
+ */
+struct musb {
+	/* device lock */
+	spinlock_t		lock;
+	struct clk		*clock;
+	irqreturn_t		(*isr)(int, void *);
+	struct work_struct	irq_work;
+
+/* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
+#define MUSB_PORT_STAT_RESUME	(1 << 31)
+
+	u32			port1_status;
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	unsigned long		rh_timer;
+
+	enum musb_h_ep0_state	ep0_stage;
+
+	/* bulk traffic normally dedicates endpoint hardware, and each
+	 * direction has its own ring of host side endpoints.
+	 * we try to progress the transfer at the head of each endpoint's
+	 * queue until it completes or NAKs too much; then we try the next
+	 * endpoint.
+	 */
+	struct musb_hw_ep	*bulk_ep;
+
+	struct list_head	control;	/* of musb_qh */
+	struct list_head	in_bulk;	/* of musb_qh */
+	struct list_head	out_bulk;	/* of musb_qh */
+	struct musb_qh		*periodic[32];	/* tree of interrupt+iso */
+#endif
+
+	/* called with IRQs blocked; ON/nonzero implies starting a session,
+	 * and waiting at least a_wait_vrise_tmout.
+	 */
+	void			(*board_set_vbus)(struct musb *, int is_on);
+
+	struct dma_controller	*dma_controller;
+
+	struct device		*controller;
+	void __iomem		*ctrl_base;
+	void __iomem		*mregs;
+
+#ifdef CONFIG_USB_TUSB6010
+	dma_addr_t		async;
+	dma_addr_t		sync;
+	void __iomem		*sync_va;
+#endif
+
+	/* passed down from chip/board specific irq handlers */
+	u8			int_usb;
+	u16			int_rx;
+	u16			int_tx;
+
+	struct otg_transceiver	xceiv;
+
+	int nIrq;
+
+	struct musb_hw_ep	 endpoints[MUSB_C_NUM_EPS];
+#define control_ep		endpoints
+
+#define VBUSERR_RETRY_COUNT	3
+	u16			vbuserr_retry;
+	u16 epmask;
+	u8 nr_endpoints;
+
+	u8 board_mode;		/* enum musb_mode */
+	int			(*board_set_power)(int state);
+
+	int			(*set_clock)(struct clk *clk, int is_active);
+
+	u8			min_power;	/* vbus for periph, in mA/2 */
+
+	bool			is_host;
+
+	int			a_wait_bcon;	/* VBUS timeout in msecs */
+	unsigned long		idle_timeout;	/* Next timeout in jiffies */
+
+	/* active means connected and not suspended */
+	unsigned		is_active:1;
+
+	unsigned is_multipoint:1;
+	unsigned ignore_disconnect:1;	/* during bus resets */
+
+#ifdef C_MP_TX
+	unsigned bulk_split:1;
+#define	can_bulk_split(musb,type) \
+		(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split)
+#else
+#define	can_bulk_split(musb, type)	0
+#endif
+
+#ifdef C_MP_RX
+	unsigned bulk_combine:1;
+#define	can_bulk_combine(musb,type) \
+		(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine)
+#else
+#define	can_bulk_combine(musb, type)	0
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	/* is_suspended means USB B_PERIPHERAL suspend */
+	unsigned		is_suspended:1;
+
+	/* may_wakeup means remote wakeup is enabled */
+	unsigned		may_wakeup:1;
+
+	/* is_self_powered is reported in device status and the
+	 * config descriptor.  is_bus_powered means B_PERIPHERAL
+	 * draws some VBUS current; both can be true.
+	 */
+	unsigned		is_self_powered:1;
+	unsigned		is_bus_powered:1;
+
+	unsigned		set_address:1;
+	unsigned		test_mode:1;
+	unsigned		softconnect:1;
+
+	u8			address;
+	u8			test_mode_nr;
+	u16			ackpend;		/* ep0 */
+	enum musb_g_ep0_state	ep0_state;
+	struct usb_gadget	g;			/* the gadget */
+	struct usb_gadget_driver *gadget_driver;	/* its driver */
+#endif
+
+#ifdef MUSB_CONFIG_PROC_FS
+	struct proc_dir_entry *proc_entry;
+#endif
+};
+
+static inline void musb_set_vbus(struct musb *musb, int is_on)
+{
+	musb->board_set_vbus(musb, is_on);
+}
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+static inline struct musb *gadget_to_musb(struct usb_gadget *g)
+{
+	return container_of(g, struct musb, g);
+}
+#endif
+
+
+/***************************** Glue it together *****************************/
+
+extern const char musb_driver_name[];
+
+extern void musb_start(struct musb *musb);
+extern void musb_stop(struct musb *musb);
+
+extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
+extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);
+
+extern void musb_load_testpacket(struct musb *);
+
+extern irqreturn_t musb_interrupt(struct musb *);
+
+extern void musb_platform_enable(struct musb *musb);
+extern void musb_platform_disable(struct musb *musb);
+
+extern void musb_hnp_stop(struct musb *musb);
+
+extern void musb_platform_set_mode(struct musb *musb, u8 musb_mode);
+
+#if defined(CONFIG_USB_TUSB6010) || \
+	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
+#else
+#define musb_platform_try_idle(x, y)		do {} while (0)
+#endif
+
+#ifdef CONFIG_USB_TUSB6010
+extern int musb_platform_get_vbus_status(struct musb *musb);
+#else
+#define musb_platform_get_vbus_status(x)	0
+#endif
+
+extern int __init musb_platform_init(struct musb *musb);
+extern int musb_platform_exit(struct musb *musb);
+
+/*-------------------------- ProcFS definitions ---------------------*/
+
+struct proc_dir_entry;
+
+#if (MUSB_DEBUG > 0) && defined(MUSB_CONFIG_PROC_FS)
+extern struct proc_dir_entry *musb_debug_create(char *name, struct musb *data);
+extern void musb_debug_delete(char *name, struct musb *data);
+
+#else
+static inline struct proc_dir_entry *
+musb_debug_create(char *name, struct musb *data)
+{
+	return NULL;
+}
+static inline void musb_debug_delete(char *name, struct musb *data)
+{
+}
+#endif
+
+#endif	/* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h
new file mode 100644
index 000000000000..3bdb311e820d
--- /dev/null
+++ b/drivers/usb/musb/musb_debug.h
@@ -0,0 +1,66 @@
+/*
+ * MUSB OTG driver debug defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_LINUX_DEBUG_H__
+#define __MUSB_LINUX_DEBUG_H__
+
+#define yprintk(facility, format, args...) \
+	do { printk(facility "%s %d: " format , \
+	__func__, __LINE__ , ## args); } while (0)
+#define WARNING(fmt, args...) yprintk(KERN_WARNING, fmt, ## args)
+#define INFO(fmt, args...) yprintk(KERN_INFO, fmt, ## args)
+#define ERR(fmt, args...) yprintk(KERN_ERR, fmt, ## args)
+
+#define xprintk(level, facility, format, args...) do { \
+	if (_dbg_level(level)) { \
+		printk(facility "%s %d: " format , \
+				__func__, __LINE__ , ## args); \
+	} } while (0)
+
+#if MUSB_DEBUG > 0
+extern unsigned debug;
+#else
+#define debug	0
+#endif
+
+static inline int _dbg_level(unsigned l)
+{
+	return debug >= l;
+}
+
+#define DBG(level, fmt, args...) xprintk(level, KERN_DEBUG, fmt, ## args)
+
+extern const char *otg_state_string(struct musb *);
+
+#endif				/*  __MUSB_LINUX_DEBUG_H__ */
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
new file mode 100644
index 000000000000..0a2c4e3602c1
--- /dev/null
+++ b/drivers/usb/musb/musb_dma.h
@@ -0,0 +1,172 @@
+/*
+ * MUSB OTG driver DMA controller abstraction
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_DMA_H__
+#define __MUSB_DMA_H__
+
+struct musb_hw_ep;
+
+/*
+ * DMA Controller Abstraction
+ *
+ * DMA Controllers are abstracted to allow use of a variety of different
+ * implementations of DMA, as allowed by the Inventra USB cores.  On the
+ * host side, usbcore sets up the DMA mappings and flushes caches; on the
+ * peripheral side, the gadget controller driver does.  Responsibilities
+ * of a DMA controller driver include:
+ *
+ *  - Handling the details of moving multiple USB packets
+ *    in cooperation with the Inventra USB core, including especially
+ *    the correct RX side treatment of short packets and buffer-full
+ *    states (both of which terminate transfers).
+ *
+ *  - Knowing the correlation between dma channels and the
+ *    Inventra core's local endpoint resources and data direction.
+ *
+ *  - Maintaining a list of allocated/available channels.
+ *
+ *  - Updating channel status on interrupts,
+ *    whether shared with the Inventra core or separate.
+ */
+
+#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+#define	is_dma_capable()	(1)
+#else
+#define	is_dma_capable()	(0)
+#endif
+
+#ifdef CONFIG_USB_TI_CPPI_DMA
+#define	is_cppi_enabled()	1
+#else
+#define	is_cppi_enabled()	0
+#endif
+
+#ifdef CONFIG_USB_TUSB_OMAP_DMA
+#define tusb_dma_omap()			1
+#else
+#define tusb_dma_omap()			0
+#endif
+
+/*
+ * DMA channel status ... updated by the dma controller driver whenever that
+ * status changes, and protected by the overall controller spinlock.
+ */
+enum dma_channel_status {
+	/* unallocated */
+	MUSB_DMA_STATUS_UNKNOWN,
+	/* allocated ... but not busy, no errors */
+	MUSB_DMA_STATUS_FREE,
+	/* busy ... transactions are active */
+	MUSB_DMA_STATUS_BUSY,
+	/* transaction(s) aborted due to ... dma or memory bus error */
+	MUSB_DMA_STATUS_BUS_ABORT,
+	/* transaction(s) aborted due to ... core error or USB fault */
+	MUSB_DMA_STATUS_CORE_ABORT
+};
+
+struct dma_controller;
+
+/**
+ * struct dma_channel - A DMA channel.
+ * @private_data: channel-private data
+ * @max_len: the maximum number of bytes the channel can move in one
+ *	transaction (typically representing many USB maximum-sized packets)
+ * @actual_len: how many bytes have been transferred
+ * @status: current channel status (updated e.g. on interrupt)
+ * @desired_mode: true if mode 1 is desired; false if mode 0 is desired
+ *
+ * channels are associated with an endpoint for the duration of at least
+ * one usb transfer.
+ */
+struct dma_channel {
+	void			*private_data;
+	/* FIXME not void* private_data, but a dma_controller * */
+	size_t			max_len;
+	size_t			actual_len;
+	enum dma_channel_status	status;
+	bool			desired_mode;
+};
+
+/*
+ * dma_channel_status - return status of dma channel
+ * @c: the channel
+ *
+ * Returns the software's view of the channel status.  If that status is BUSY
+ * then it's possible that the hardware has completed (or aborted) a transfer,
+ * so the driver needs to update that status.
+ */
+static inline enum dma_channel_status
+dma_channel_status(struct dma_channel *c)
+{
+	return (is_dma_capable() && c) ? c->status : MUSB_DMA_STATUS_UNKNOWN;
+}
+
+/**
+ * struct dma_controller - A DMA Controller.
+ * @start: call this to start a DMA controller;
+ *	return 0 on success, else negative errno
+ * @stop: call this to stop a DMA controller
+ *	return 0 on success, else negative errno
+ * @channel_alloc: call this to allocate a DMA channel
+ * @channel_release: call this to release a DMA channel
+ * @channel_abort: call this to abort a pending DMA transaction,
+ *	returning it to FREE (but allocated) state
+ *
+ * Controllers manage dma channels.
+ */
+struct dma_controller {
+	int			(*start)(struct dma_controller *);
+	int			(*stop)(struct dma_controller *);
+	struct dma_channel	*(*channel_alloc)(struct dma_controller *,
+					struct musb_hw_ep *, u8 is_tx);
+	void			(*channel_release)(struct dma_channel *);
+	int			(*channel_program)(struct dma_channel *channel,
+							u16 maxpacket, u8 mode,
+							dma_addr_t dma_addr,
+							u32 length);
+	int			(*channel_abort)(struct dma_channel *);
+};
+
+/* called after channel_program(), may indicate a fault */
+extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit);
+
+
+extern struct dma_controller *__init
+dma_controller_create(struct musb *, void __iomem *);
+
+extern void dma_controller_destroy(struct dma_controller *);
+
+#endif	/* __MUSB_DMA_H__ */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
new file mode 100644
index 000000000000..b3773f13ee0a
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget.c
@@ -0,0 +1,2033 @@
+/*
+ * MUSB OTG driver peripheral support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/moduleparam.h>
+#include <linux/stat.h>
+#include <linux/dma-mapping.h>
+
+#include "musb_core.h"
+
+
+/* MUSB PERIPHERAL status 3-mar-2006:
+ *
+ * - EP0 seems solid.  It passes both USBCV and usbtest control cases.
+ *   Minor glitches:
+ *
+ *     + remote wakeup to Linux hosts work, but saw USBCV failures;
+ *       in one test run (operator error?)
+ *     + endpoint halt tests -- in both usbtest and usbcv -- seem
+ *       to break when dma is enabled ... is something wrongly
+ *       clearing SENDSTALL?
+ *
+ * - Mass storage behaved ok when last tested.  Network traffic patterns
+ *   (with lots of short transfers etc) need retesting; they turn up the
+ *   worst cases of the DMA, since short packets are typical but are not
+ *   required.
+ *
+ * - TX/IN
+ *     + both pio and dma behave in with network and g_zero tests
+ *     + no cppi throughput issues other than no-hw-queueing
+ *     + failed with FLAT_REG (DaVinci)
+ *     + seems to behave with double buffering, PIO -and- CPPI
+ *     + with gadgetfs + AIO, requests got lost?
+ *
+ * - RX/OUT
+ *     + both pio and dma behave in with network and g_zero tests
+ *     + dma is slow in typical case (short_not_ok is clear)
+ *     + double buffering ok with PIO
+ *     + double buffering *FAILS* with CPPI, wrong data bytes sometimes
+ *     + request lossage observed with gadgetfs
+ *
+ * - ISO not tested ... might work, but only weakly isochronous
+ *
+ * - Gadget driver disabling of softconnect during bind() is ignored; so
+ *   drivers can't hold off host requests until userspace is ready.
+ *   (Workaround:  they can turn it off later.)
+ *
+ * - PORTABILITY (assumes PIO works):
+ *     + DaVinci, basically works with cppi dma
+ *     + OMAP 2430, ditto with mentor dma
+ *     + TUSB 6010, platform-specific dma in the works
+ */
+
+/* ----------------------------------------------------------------------- */
+
+/*
+ * Immediately complete a request.
+ *
+ * @param request the request to complete
+ * @param status the status to complete the request with
+ * Context: controller locked, IRQs blocked.
+ */
+void musb_g_giveback(
+	struct musb_ep		*ep,
+	struct usb_request	*request,
+	int			status)
+__releases(ep->musb->lock)
+__acquires(ep->musb->lock)
+{
+	struct musb_request	*req;
+	struct musb		*musb;
+	int			busy = ep->busy;
+
+	req = to_musb_request(request);
+
+	list_del(&request->list);
+	if (req->request.status == -EINPROGRESS)
+		req->request.status = status;
+	musb = req->musb;
+
+	ep->busy = 1;
+	spin_unlock(&musb->lock);
+	if (is_dma_capable()) {
+		if (req->mapped) {
+			dma_unmap_single(musb->controller,
+					req->request.dma,
+					req->request.length,
+					req->tx
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+			req->request.dma = DMA_ADDR_INVALID;
+			req->mapped = 0;
+		} else if (req->request.dma != DMA_ADDR_INVALID)
+			dma_sync_single_for_cpu(musb->controller,
+					req->request.dma,
+					req->request.length,
+					req->tx
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+	}
+	if (request->status == 0)
+		DBG(5, "%s done request %p,  %d/%d\n",
+				ep->end_point.name, request,
+				req->request.actual, req->request.length);
+	else
+		DBG(2, "%s request %p, %d/%d fault %d\n",
+				ep->end_point.name, request,
+				req->request.actual, req->request.length,
+				request->status);
+	req->request.complete(&req->ep->end_point, &req->request);
+	spin_lock(&musb->lock);
+	ep->busy = busy;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/*
+ * Abort requests queued to an endpoint using the status. Synchronous.
+ * caller locked controller and blocked irqs, and selected this ep.
+ */
+static void nuke(struct musb_ep *ep, const int status)
+{
+	struct musb_request	*req = NULL;
+	void __iomem *epio = ep->musb->endpoints[ep->current_epnum].regs;
+
+	ep->busy = 1;
+
+	if (is_dma_capable() && ep->dma) {
+		struct dma_controller	*c = ep->musb->dma_controller;
+		int value;
+		if (ep->is_in) {
+			musb_writew(epio, MUSB_TXCSR,
+					0 | MUSB_TXCSR_FLUSHFIFO);
+			musb_writew(epio, MUSB_TXCSR,
+					0 | MUSB_TXCSR_FLUSHFIFO);
+		} else {
+			musb_writew(epio, MUSB_RXCSR,
+					0 | MUSB_RXCSR_FLUSHFIFO);
+			musb_writew(epio, MUSB_RXCSR,
+					0 | MUSB_RXCSR_FLUSHFIFO);
+		}
+
+		value = c->channel_abort(ep->dma);
+		DBG(value ? 1 : 6, "%s: abort DMA --> %d\n", ep->name, value);
+		c->channel_release(ep->dma);
+		ep->dma = NULL;
+	}
+
+	while (!list_empty(&(ep->req_list))) {
+		req = container_of(ep->req_list.next, struct musb_request,
+				request.list);
+		musb_g_giveback(ep, &req->request, status);
+	}
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* Data transfers - pure PIO, pure DMA, or mixed mode */
+
+/*
+ * This assumes the separate CPPI engine is responding to DMA requests
+ * from the usb core ... sequenced a bit differently from mentor dma.
+ */
+
+static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep)
+{
+	if (can_bulk_split(musb, ep->type))
+		return ep->hw_ep->max_packet_sz_tx;
+	else
+		return ep->packet_sz;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Peripheral tx (IN) using Mentor DMA works as follows:
+	Only mode 0 is used for transfers <= wPktSize,
+	mode 1 is used for larger transfers,
+
+	One of the following happens:
+	- Host sends IN token which causes an endpoint interrupt
+		-> TxAvail
+			-> if DMA is currently busy, exit.
+			-> if queue is non-empty, txstate().
+
+	- Request is queued by the gadget driver.
+		-> if queue was previously empty, txstate()
+
+	txstate()
+		-> start
+		  /\	-> setup DMA
+		  |     (data is transferred to the FIFO, then sent out when
+		  |	IN token(s) are recd from Host.
+		  |		-> DMA interrupt on completion
+		  |		   calls TxAvail.
+		  |		      -> stop DMA, ~DmaEenab,
+		  |		      -> set TxPktRdy for last short pkt or zlp
+		  |		      -> Complete Request
+		  |		      -> Continue next request (call txstate)
+		  |___________________________________|
+
+ * Non-Mentor DMA engines can of course work differently, such as by
+ * upleveling from irq-per-packet to irq-per-buffer.
+ */
+
+#endif
+
+/*
+ * An endpoint is transmitting data. This can be called either from
+ * the IRQ routine or from ep.queue() to kickstart a request on an
+ * endpoint.
+ *
+ * Context: controller locked, IRQs blocked, endpoint selected
+ */
+static void txstate(struct musb *musb, struct musb_request *req)
+{
+	u8			epnum = req->epnum;
+	struct musb_ep		*musb_ep;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct usb_request	*request;
+	u16			fifo_count = 0, csr;
+	int			use_dma = 0;
+
+	musb_ep = req->ep;
+
+	/* we shouldn't get here while DMA is active ... but we do ... */
+	if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
+		DBG(4, "dma pending...\n");
+		return;
+	}
+
+	/* read TXCSR before */
+	csr = musb_readw(epio, MUSB_TXCSR);
+
+	request = &req->request;
+	fifo_count = min(max_ep_writesize(musb, musb_ep),
+			(int)(request->length - request->actual));
+
+	if (csr & MUSB_TXCSR_TXPKTRDY) {
+		DBG(5, "%s old packet still ready , txcsr %03x\n",
+				musb_ep->end_point.name, csr);
+		return;
+	}
+
+	if (csr & MUSB_TXCSR_P_SENDSTALL) {
+		DBG(5, "%s stalling, txcsr %03x\n",
+				musb_ep->end_point.name, csr);
+		return;
+	}
+
+	DBG(4, "hw_ep%d, maxpacket %d, fifo count %d, txcsr %03x\n",
+			epnum, musb_ep->packet_sz, fifo_count,
+			csr);
+
+#ifndef	CONFIG_MUSB_PIO_ONLY
+	if (is_dma_capable() && musb_ep->dma) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		use_dma = (request->dma != DMA_ADDR_INVALID);
+
+		/* MUSB_TXCSR_P_ISO is still set correctly */
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+		{
+			size_t request_size;
+
+			/* setup DMA, then program endpoint CSR */
+			request_size = min(request->length,
+						musb_ep->dma->max_len);
+			if (request_size <= musb_ep->packet_sz)
+				musb_ep->dma->desired_mode = 0;
+			else
+				musb_ep->dma->desired_mode = 1;
+
+			use_dma = use_dma && c->channel_program(
+					musb_ep->dma, musb_ep->packet_sz,
+					musb_ep->dma->desired_mode,
+					request->dma, request_size);
+			if (use_dma) {
+				if (musb_ep->dma->desired_mode == 0) {
+					/* ASSERT: DMAENAB is clear */
+					csr &= ~(MUSB_TXCSR_AUTOSET |
+							MUSB_TXCSR_DMAMODE);
+					csr |= (MUSB_TXCSR_DMAENAB |
+							MUSB_TXCSR_MODE);
+					/* against programming guide */
+				} else
+					csr |= (MUSB_TXCSR_AUTOSET
+							| MUSB_TXCSR_DMAENAB
+							| MUSB_TXCSR_DMAMODE
+							| MUSB_TXCSR_MODE);
+
+				csr &= ~MUSB_TXCSR_P_UNDERRUN;
+				musb_writew(epio, MUSB_TXCSR, csr);
+			}
+		}
+
+#elif defined(CONFIG_USB_TI_CPPI_DMA)
+		/* program endpoint CSR first, then setup DMA */
+		csr &= ~(MUSB_TXCSR_AUTOSET
+				| MUSB_TXCSR_DMAMODE
+				| MUSB_TXCSR_P_UNDERRUN
+				| MUSB_TXCSR_TXPKTRDY);
+		csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB;
+		musb_writew(epio, MUSB_TXCSR,
+			(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
+				| csr);
+
+		/* ensure writebuffer is empty */
+		csr = musb_readw(epio, MUSB_TXCSR);
+
+		/* NOTE host side sets DMAENAB later than this; both are
+		 * OK since the transfer dma glue (between CPPI and Mentor
+		 * fifos) just tells CPPI it could start.  Data only moves
+		 * to the USB TX fifo when both fifos are ready.
+		 */
+
+		/* "mode" is irrelevant here; handle terminating ZLPs like
+		 * PIO does, since the hardware RNDIS mode seems unreliable
+		 * except for the last-packet-is-already-short case.
+		 */
+		use_dma = use_dma && c->channel_program(
+				musb_ep->dma, musb_ep->packet_sz,
+				0,
+				request->dma,
+				request->length);
+		if (!use_dma) {
+			c->channel_release(musb_ep->dma);
+			musb_ep->dma = NULL;
+			/* ASSERT: DMAENAB clear */
+			csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+			/* invariant: prequest->buf is non-null */
+		}
+#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
+		use_dma = use_dma && c->channel_program(
+				musb_ep->dma, musb_ep->packet_sz,
+				request->zero,
+				request->dma,
+				request->length);
+#endif
+	}
+#endif
+
+	if (!use_dma) {
+		musb_write_fifo(musb_ep->hw_ep, fifo_count,
+				(u8 *) (request->buf + request->actual));
+		request->actual += fifo_count;
+		csr |= MUSB_TXCSR_TXPKTRDY;
+		csr &= ~MUSB_TXCSR_P_UNDERRUN;
+		musb_writew(epio, MUSB_TXCSR, csr);
+	}
+
+	/* host may already have the data when this message shows... */
+	DBG(3, "%s TX/IN %s len %d/%d, txcsr %04x, fifo %d/%d\n",
+			musb_ep->end_point.name, use_dma ? "dma" : "pio",
+			request->actual, request->length,
+			musb_readw(epio, MUSB_TXCSR),
+			fifo_count,
+			musb_readw(epio, MUSB_TXMAXP));
+}
+
+/*
+ * FIFO state update (e.g. data ready).
+ * Called from IRQ,  with controller locked.
+ */
+void musb_g_tx(struct musb *musb, u8 epnum)
+{
+	u16			csr;
+	struct usb_request	*request;
+	u8 __iomem		*mbase = musb->mregs;
+	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_in;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct dma_channel	*dma;
+
+	musb_ep_select(mbase, epnum);
+	request = next_request(musb_ep);
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	DBG(4, "<== %s, txcsr %04x\n", musb_ep->end_point.name, csr);
+
+	dma = is_dma_capable() ? musb_ep->dma : NULL;
+	do {
+		/* REVISIT for high bandwidth, MUSB_TXCSR_P_INCOMPTX
+		 * probably rates reporting as a host error
+		 */
+		if (csr & MUSB_TXCSR_P_SENTSTALL) {
+			csr |= MUSB_TXCSR_P_WZC_BITS;
+			csr &= ~MUSB_TXCSR_P_SENTSTALL;
+			musb_writew(epio, MUSB_TXCSR, csr);
+			if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+				dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+				musb->dma_controller->channel_abort(dma);
+			}
+
+			if (request)
+				musb_g_giveback(musb_ep, request, -EPIPE);
+
+			break;
+		}
+
+		if (csr & MUSB_TXCSR_P_UNDERRUN) {
+			/* we NAKed, no big deal ... little reason to care */
+			csr |= MUSB_TXCSR_P_WZC_BITS;
+			csr &= ~(MUSB_TXCSR_P_UNDERRUN
+					| MUSB_TXCSR_TXPKTRDY);
+			musb_writew(epio, MUSB_TXCSR, csr);
+			DBG(20, "underrun on ep%d, req %p\n", epnum, request);
+		}
+
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			/* SHOULD NOT HAPPEN ... has with cppi though, after
+			 * changing SENDSTALL (and other cases); harmless?
+			 */
+			DBG(5, "%s dma still busy?\n", musb_ep->end_point.name);
+			break;
+		}
+
+		if (request) {
+			u8	is_dma = 0;
+
+			if (dma && (csr & MUSB_TXCSR_DMAENAB)) {
+				is_dma = 1;
+				csr |= MUSB_TXCSR_P_WZC_BITS;
+				csr &= ~(MUSB_TXCSR_DMAENAB
+						| MUSB_TXCSR_P_UNDERRUN
+						| MUSB_TXCSR_TXPKTRDY);
+				musb_writew(epio, MUSB_TXCSR, csr);
+				/* ensure writebuffer is empty */
+				csr = musb_readw(epio, MUSB_TXCSR);
+				request->actual += musb_ep->dma->actual_len;
+				DBG(4, "TXCSR%d %04x, dma off, "
+						"len %zu, req %p\n",
+					epnum, csr,
+					musb_ep->dma->actual_len,
+					request);
+			}
+
+			if (is_dma || request->actual == request->length) {
+
+				/* First, maybe a terminating short packet.
+				 * Some DMA engines might handle this by
+				 * themselves.
+				 */
+				if ((request->zero
+						&& request->length
+						&& (request->length
+							% musb_ep->packet_sz)
+							== 0)
+#ifdef CONFIG_USB_INVENTRA_DMA
+					|| (is_dma &&
+						((!dma->desired_mode) ||
+						    (request->actual &
+						    (musb_ep->packet_sz - 1))))
+#endif
+				) {
+					/* on dma completion, fifo may not
+					 * be available yet ...
+					 */
+					if (csr & MUSB_TXCSR_TXPKTRDY)
+						break;
+
+					DBG(4, "sending zero pkt\n");
+					musb_writew(epio, MUSB_TXCSR,
+							MUSB_TXCSR_MODE
+							| MUSB_TXCSR_TXPKTRDY);
+					request->zero = 0;
+				}
+
+				/* ... or if not, then complete it */
+				musb_g_giveback(musb_ep, request, 0);
+
+				/* kickstart next transfer if appropriate;
+				 * the packet that just completed might not
+				 * be transmitted for hours or days.
+				 * REVISIT for double buffering...
+				 * FIXME revisit for stalls too...
+				 */
+				musb_ep_select(mbase, epnum);
+				csr = musb_readw(epio, MUSB_TXCSR);
+				if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+					break;
+				request = musb_ep->desc
+						? next_request(musb_ep)
+						: NULL;
+				if (!request) {
+					DBG(4, "%s idle now\n",
+						musb_ep->end_point.name);
+					break;
+				}
+			}
+
+			txstate(musb, to_musb_request(request));
+		}
+
+	} while (0);
+}
+
+/* ------------------------------------------------------------ */
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Peripheral rx (OUT) using Mentor DMA works as follows:
+	- Only mode 0 is used.
+
+	- Request is queued by the gadget class driver.
+		-> if queue was previously empty, rxstate()
+
+	- Host sends OUT token which causes an endpoint interrupt
+	  /\      -> RxReady
+	  |	      -> if request queued, call rxstate
+	  |		/\	-> setup DMA
+	  |		|	     -> DMA interrupt on completion
+	  |		|		-> RxReady
+	  |		|		      -> stop DMA
+	  |		|		      -> ack the read
+	  |		|		      -> if data recd = max expected
+	  |		|				by the request, or host
+	  |		|				sent a short packet,
+	  |		|				complete the request,
+	  |		|				and start the next one.
+	  |		|_____________________________________|
+	  |					 else just wait for the host
+	  |					    to send the next OUT token.
+	  |__________________________________________________|
+
+ * Non-Mentor DMA engines can of course work differently.
+ */
+
+#endif
+
+/*
+ * Context: controller locked, IRQs blocked, endpoint selected
+ */
+static void rxstate(struct musb *musb, struct musb_request *req)
+{
+	u16			csr = 0;
+	const u8		epnum = req->epnum;
+	struct usb_request	*request = &req->request;
+	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_out;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	u16			fifo_count = 0;
+	u16			len = musb_ep->packet_sz;
+
+	csr = musb_readw(epio, MUSB_RXCSR);
+
+	if (is_cppi_enabled() && musb_ep->dma) {
+		struct dma_controller	*c = musb->dma_controller;
+		struct dma_channel	*channel = musb_ep->dma;
+
+		/* NOTE:  CPPI won't actually stop advancing the DMA
+		 * queue after short packet transfers, so this is almost
+		 * always going to run as IRQ-per-packet DMA so that
+		 * faults will be handled correctly.
+		 */
+		if (c->channel_program(channel,
+				musb_ep->packet_sz,
+				!request->short_not_ok,
+				request->dma + request->actual,
+				request->length - request->actual)) {
+
+			/* make sure that if an rxpkt arrived after the irq,
+			 * the cppi engine will be ready to take it as soon
+			 * as DMA is enabled
+			 */
+			csr &= ~(MUSB_RXCSR_AUTOCLEAR
+					| MUSB_RXCSR_DMAMODE);
+			csr |= MUSB_RXCSR_DMAENAB | MUSB_RXCSR_P_WZC_BITS;
+			musb_writew(epio, MUSB_RXCSR, csr);
+			return;
+		}
+	}
+
+	if (csr & MUSB_RXCSR_RXPKTRDY) {
+		len = musb_readw(epio, MUSB_RXCOUNT);
+		if (request->actual < request->length) {
+#ifdef CONFIG_USB_INVENTRA_DMA
+			if (is_dma_capable() && musb_ep->dma) {
+				struct dma_controller	*c;
+				struct dma_channel	*channel;
+				int			use_dma = 0;
+
+				c = musb->dma_controller;
+				channel = musb_ep->dma;
+
+	/* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
+	 * mode 0 only. So we do not get endpoint interrupts due to DMA
+	 * completion. We only get interrupts from DMA controller.
+	 *
+	 * We could operate in DMA mode 1 if we knew the size of the tranfer
+	 * in advance. For mass storage class, request->length = what the host
+	 * sends, so that'd work.  But for pretty much everything else,
+	 * request->length is routinely more than what the host sends. For
+	 * most these gadgets, end of is signified either by a short packet,
+	 * or filling the last byte of the buffer.  (Sending extra data in
+	 * that last pckate should trigger an overflow fault.)  But in mode 1,
+	 * we don't get DMA completion interrrupt for short packets.
+	 *
+	 * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
+	 * to get endpoint interrupt on every DMA req, but that didn't seem
+	 * to work reliably.
+	 *
+	 * REVISIT an updated g_file_storage can set req->short_not_ok, which
+	 * then becomes usable as a runtime "use mode 1" hint...
+	 */
+
+				csr |= MUSB_RXCSR_DMAENAB;
+#ifdef USE_MODE1
+				csr |= MUSB_RXCSR_AUTOCLEAR;
+				/* csr |= MUSB_RXCSR_DMAMODE; */
+
+				/* this special sequence (enabling and then
+				 * disabling MUSB_RXCSR_DMAMODE) is required
+				 * to get DMAReq to activate
+				 */
+				musb_writew(epio, MUSB_RXCSR,
+					csr | MUSB_RXCSR_DMAMODE);
+#endif
+				musb_writew(epio, MUSB_RXCSR, csr);
+
+				if (request->actual < request->length) {
+					int transfer_size = 0;
+#ifdef USE_MODE1
+					transfer_size = min(request->length,
+							channel->max_len);
+#else
+					transfer_size = len;
+#endif
+					if (transfer_size <= musb_ep->packet_sz)
+						musb_ep->dma->desired_mode = 0;
+					else
+						musb_ep->dma->desired_mode = 1;
+
+					use_dma = c->channel_program(
+							channel,
+							musb_ep->packet_sz,
+							channel->desired_mode,
+							request->dma
+							+ request->actual,
+							transfer_size);
+				}
+
+				if (use_dma)
+					return;
+			}
+#endif	/* Mentor's DMA */
+
+			fifo_count = request->length - request->actual;
+			DBG(3, "%s OUT/RX pio fifo %d/%d, maxpacket %d\n",
+					musb_ep->end_point.name,
+					len, fifo_count,
+					musb_ep->packet_sz);
+
+			fifo_count = min(len, fifo_count);
+
+#ifdef	CONFIG_USB_TUSB_OMAP_DMA
+			if (tusb_dma_omap() && musb_ep->dma) {
+				struct dma_controller *c = musb->dma_controller;
+				struct dma_channel *channel = musb_ep->dma;
+				u32 dma_addr = request->dma + request->actual;
+				int ret;
+
+				ret = c->channel_program(channel,
+						musb_ep->packet_sz,
+						channel->desired_mode,
+						dma_addr,
+						fifo_count);
+				if (ret)
+					return;
+			}
+#endif
+
+			musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
+					(request->buf + request->actual));
+			request->actual += fifo_count;
+
+			/* REVISIT if we left anything in the fifo, flush
+			 * it and report -EOVERFLOW
+			 */
+
+			/* ack the read! */
+			csr |= MUSB_RXCSR_P_WZC_BITS;
+			csr &= ~MUSB_RXCSR_RXPKTRDY;
+			musb_writew(epio, MUSB_RXCSR, csr);
+		}
+	}
+
+	/* reach the end or short packet detected */
+	if (request->actual == request->length || len < musb_ep->packet_sz)
+		musb_g_giveback(musb_ep, request, 0);
+}
+
+/*
+ * Data ready for a request; called from IRQ
+ */
+void musb_g_rx(struct musb *musb, u8 epnum)
+{
+	u16			csr;
+	struct usb_request	*request;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_out;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct dma_channel	*dma;
+
+	musb_ep_select(mbase, epnum);
+
+	request = next_request(musb_ep);
+
+	csr = musb_readw(epio, MUSB_RXCSR);
+	dma = is_dma_capable() ? musb_ep->dma : NULL;
+
+	DBG(4, "<== %s, rxcsr %04x%s %p\n", musb_ep->end_point.name,
+			csr, dma ? " (dma)" : "", request);
+
+	if (csr & MUSB_RXCSR_P_SENTSTALL) {
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+			request->actual += musb_ep->dma->actual_len;
+		}
+
+		csr |= MUSB_RXCSR_P_WZC_BITS;
+		csr &= ~MUSB_RXCSR_P_SENTSTALL;
+		musb_writew(epio, MUSB_RXCSR, csr);
+
+		if (request)
+			musb_g_giveback(musb_ep, request, -EPIPE);
+		goto done;
+	}
+
+	if (csr & MUSB_RXCSR_P_OVERRUN) {
+		/* csr |= MUSB_RXCSR_P_WZC_BITS; */
+		csr &= ~MUSB_RXCSR_P_OVERRUN;
+		musb_writew(epio, MUSB_RXCSR, csr);
+
+		DBG(3, "%s iso overrun on %p\n", musb_ep->name, request);
+		if (request && request->status == -EINPROGRESS)
+			request->status = -EOVERFLOW;
+	}
+	if (csr & MUSB_RXCSR_INCOMPRX) {
+		/* REVISIT not necessarily an error */
+		DBG(4, "%s, incomprx\n", musb_ep->end_point.name);
+	}
+
+	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+		/* "should not happen"; likely RXPKTRDY pending for DMA */
+		DBG((csr & MUSB_RXCSR_DMAENAB) ? 4 : 1,
+			"%s busy, csr %04x\n",
+			musb_ep->end_point.name, csr);
+		goto done;
+	}
+
+	if (dma && (csr & MUSB_RXCSR_DMAENAB)) {
+		csr &= ~(MUSB_RXCSR_AUTOCLEAR
+				| MUSB_RXCSR_DMAENAB
+				| MUSB_RXCSR_DMAMODE);
+		musb_writew(epio, MUSB_RXCSR,
+			MUSB_RXCSR_P_WZC_BITS | csr);
+
+		request->actual += musb_ep->dma->actual_len;
+
+		DBG(4, "RXCSR%d %04x, dma off, %04x, len %zu, req %p\n",
+			epnum, csr,
+			musb_readw(epio, MUSB_RXCSR),
+			musb_ep->dma->actual_len, request);
+
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
+		/* Autoclear doesn't clear RxPktRdy for short packets */
+		if ((dma->desired_mode == 0)
+				|| (dma->actual_len
+					& (musb_ep->packet_sz - 1))) {
+			/* ack the read! */
+			csr &= ~MUSB_RXCSR_RXPKTRDY;
+			musb_writew(epio, MUSB_RXCSR, csr);
+		}
+
+		/* incomplete, and not short? wait for next IN packet */
+		if ((request->actual < request->length)
+				&& (musb_ep->dma->actual_len
+					== musb_ep->packet_sz))
+			goto done;
+#endif
+		musb_g_giveback(musb_ep, request, 0);
+
+		request = next_request(musb_ep);
+		if (!request)
+			goto done;
+
+		/* don't start more i/o till the stall clears */
+		musb_ep_select(mbase, epnum);
+		csr = musb_readw(epio, MUSB_RXCSR);
+		if (csr & MUSB_RXCSR_P_SENDSTALL)
+			goto done;
+	}
+
+
+	/* analyze request if the ep is hot */
+	if (request)
+		rxstate(musb, to_musb_request(request));
+	else
+		DBG(3, "packet waiting for %s%s request\n",
+				musb_ep->desc ? "" : "inactive ",
+				musb_ep->end_point.name);
+
+done:
+	return;
+}
+
+/* ------------------------------------------------------------ */
+
+static int musb_gadget_enable(struct usb_ep *ep,
+			const struct usb_endpoint_descriptor *desc)
+{
+	unsigned long		flags;
+	struct musb_ep		*musb_ep;
+	struct musb_hw_ep	*hw_ep;
+	void __iomem		*regs;
+	struct musb		*musb;
+	void __iomem	*mbase;
+	u8		epnum;
+	u16		csr;
+	unsigned	tmp;
+	int		status = -EINVAL;
+
+	if (!ep || !desc)
+		return -EINVAL;
+
+	musb_ep = to_musb_ep(ep);
+	hw_ep = musb_ep->hw_ep;
+	regs = hw_ep->regs;
+	musb = musb_ep->musb;
+	mbase = musb->mregs;
+	epnum = musb_ep->current_epnum;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb_ep->desc) {
+		status = -EBUSY;
+		goto fail;
+	}
+	musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+	/* check direction and (later) maxpacket size against endpoint */
+	if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum)
+		goto fail;
+
+	/* REVISIT this rules out high bandwidth periodic transfers */
+	tmp = le16_to_cpu(desc->wMaxPacketSize);
+	if (tmp & ~0x07ff)
+		goto fail;
+	musb_ep->packet_sz = tmp;
+
+	/* enable the interrupts for the endpoint, set the endpoint
+	 * packet size (or fail), set the mode, clear the fifo
+	 */
+	musb_ep_select(mbase, epnum);
+	if (desc->bEndpointAddress & USB_DIR_IN) {
+		u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
+
+		if (hw_ep->is_shared_fifo)
+			musb_ep->is_in = 1;
+		if (!musb_ep->is_in)
+			goto fail;
+		if (tmp > hw_ep->max_packet_sz_tx)
+			goto fail;
+
+		int_txe |= (1 << epnum);
+		musb_writew(mbase, MUSB_INTRTXE, int_txe);
+
+		/* REVISIT if can_bulk_split(), use by updating "tmp";
+		 * likewise high bandwidth periodic tx
+		 */
+		musb_writew(regs, MUSB_TXMAXP, tmp);
+
+		csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
+		if (musb_readw(regs, MUSB_TXCSR)
+				& MUSB_TXCSR_FIFONOTEMPTY)
+			csr |= MUSB_TXCSR_FLUSHFIFO;
+		if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
+			csr |= MUSB_TXCSR_P_ISO;
+
+		/* set twice in case of double buffering */
+		musb_writew(regs, MUSB_TXCSR, csr);
+		/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
+		musb_writew(regs, MUSB_TXCSR, csr);
+
+	} else {
+		u16 int_rxe = musb_readw(mbase, MUSB_INTRRXE);
+
+		if (hw_ep->is_shared_fifo)
+			musb_ep->is_in = 0;
+		if (musb_ep->is_in)
+			goto fail;
+		if (tmp > hw_ep->max_packet_sz_rx)
+			goto fail;
+
+		int_rxe |= (1 << epnum);
+		musb_writew(mbase, MUSB_INTRRXE, int_rxe);
+
+		/* REVISIT if can_bulk_combine() use by updating "tmp"
+		 * likewise high bandwidth periodic rx
+		 */
+		musb_writew(regs, MUSB_RXMAXP, tmp);
+
+		/* force shared fifo to OUT-only mode */
+		if (hw_ep->is_shared_fifo) {
+			csr = musb_readw(regs, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY);
+			musb_writew(regs, MUSB_TXCSR, csr);
+		}
+
+		csr = MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_CLRDATATOG;
+		if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
+			csr |= MUSB_RXCSR_P_ISO;
+		else if (musb_ep->type == USB_ENDPOINT_XFER_INT)
+			csr |= MUSB_RXCSR_DISNYET;
+
+		/* set twice in case of double buffering */
+		musb_writew(regs, MUSB_RXCSR, csr);
+		musb_writew(regs, MUSB_RXCSR, csr);
+	}
+
+	/* NOTE:  all the I/O code _should_ work fine without DMA, in case
+	 * for some reason you run out of channels here.
+	 */
+	if (is_dma_capable() && musb->dma_controller) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		musb_ep->dma = c->channel_alloc(c, hw_ep,
+				(desc->bEndpointAddress & USB_DIR_IN));
+	} else
+		musb_ep->dma = NULL;
+
+	musb_ep->desc = desc;
+	musb_ep->busy = 0;
+	status = 0;
+
+	pr_debug("%s periph: enabled %s for %s %s, %smaxpacket %d\n",
+			musb_driver_name, musb_ep->end_point.name,
+			({ char *s; switch (musb_ep->type) {
+			case USB_ENDPOINT_XFER_BULK:	s = "bulk"; break;
+			case USB_ENDPOINT_XFER_INT:	s = "int"; break;
+			default:			s = "iso"; break;
+			}; s; }),
+			musb_ep->is_in ? "IN" : "OUT",
+			musb_ep->dma ? "dma, " : "",
+			musb_ep->packet_sz);
+
+	schedule_work(&musb->irq_work);
+
+fail:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+/*
+ * Disable an endpoint flushing all requests queued.
+ */
+static int musb_gadget_disable(struct usb_ep *ep)
+{
+	unsigned long	flags;
+	struct musb	*musb;
+	u8		epnum;
+	struct musb_ep	*musb_ep;
+	void __iomem	*epio;
+	int		status = 0;
+
+	musb_ep = to_musb_ep(ep);
+	musb = musb_ep->musb;
+	epnum = musb_ep->current_epnum;
+	epio = musb->endpoints[epnum].regs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_ep_select(musb->mregs, epnum);
+
+	/* zero the endpoint sizes */
+	if (musb_ep->is_in) {
+		u16 int_txe = musb_readw(musb->mregs, MUSB_INTRTXE);
+		int_txe &= ~(1 << epnum);
+		musb_writew(musb->mregs, MUSB_INTRTXE, int_txe);
+		musb_writew(epio, MUSB_TXMAXP, 0);
+	} else {
+		u16 int_rxe = musb_readw(musb->mregs, MUSB_INTRRXE);
+		int_rxe &= ~(1 << epnum);
+		musb_writew(musb->mregs, MUSB_INTRRXE, int_rxe);
+		musb_writew(epio, MUSB_RXMAXP, 0);
+	}
+
+	musb_ep->desc = NULL;
+
+	/* abort all pending DMA and requests */
+	nuke(musb_ep, -ESHUTDOWN);
+
+	schedule_work(&musb->irq_work);
+
+	spin_unlock_irqrestore(&(musb->lock), flags);
+
+	DBG(2, "%s\n", musb_ep->end_point.name);
+
+	return status;
+}
+
+/*
+ * Allocate a request for an endpoint.
+ * Reused by ep0 code.
+ */
+struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	struct musb_request	*request = NULL;
+
+	request = kzalloc(sizeof *request, gfp_flags);
+	if (request) {
+		INIT_LIST_HEAD(&request->request.list);
+		request->request.dma = DMA_ADDR_INVALID;
+		request->epnum = musb_ep->current_epnum;
+		request->ep = musb_ep;
+	}
+
+	return &request->request;
+}
+
+/*
+ * Free a request
+ * Reused by ep0 code.
+ */
+void musb_free_request(struct usb_ep *ep, struct usb_request *req)
+{
+	kfree(to_musb_request(req));
+}
+
+static LIST_HEAD(buffers);
+
+struct free_record {
+	struct list_head	list;
+	struct device		*dev;
+	unsigned		bytes;
+	dma_addr_t		dma;
+};
+
+/*
+ * Context: controller locked, IRQs blocked.
+ */
+static void musb_ep_restart(struct musb *musb, struct musb_request *req)
+{
+	DBG(3, "<== %s request %p len %u on hw_ep%d\n",
+		req->tx ? "TX/IN" : "RX/OUT",
+		&req->request, req->request.length, req->epnum);
+
+	musb_ep_select(musb->mregs, req->epnum);
+	if (req->tx)
+		txstate(musb, req);
+	else
+		rxstate(musb, req);
+}
+
+static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
+			gfp_t gfp_flags)
+{
+	struct musb_ep		*musb_ep;
+	struct musb_request	*request;
+	struct musb		*musb;
+	int			status = 0;
+	unsigned long		lockflags;
+
+	if (!ep || !req)
+		return -EINVAL;
+	if (!req->buf)
+		return -ENODATA;
+
+	musb_ep = to_musb_ep(ep);
+	musb = musb_ep->musb;
+
+	request = to_musb_request(req);
+	request->musb = musb;
+
+	if (request->ep != musb_ep)
+		return -EINVAL;
+
+	DBG(4, "<== to %s request=%p\n", ep->name, req);
+
+	/* request is mine now... */
+	request->request.actual = 0;
+	request->request.status = -EINPROGRESS;
+	request->epnum = musb_ep->current_epnum;
+	request->tx = musb_ep->is_in;
+
+	if (is_dma_capable() && musb_ep->dma) {
+		if (request->request.dma == DMA_ADDR_INVALID) {
+			request->request.dma = dma_map_single(
+					musb->controller,
+					request->request.buf,
+					request->request.length,
+					request->tx
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+			request->mapped = 1;
+		} else {
+			dma_sync_single_for_device(musb->controller,
+					request->request.dma,
+					request->request.length,
+					request->tx
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+			request->mapped = 0;
+		}
+	} else if (!req->buf) {
+		return -ENODATA;
+	} else
+		request->mapped = 0;
+
+	spin_lock_irqsave(&musb->lock, lockflags);
+
+	/* don't queue if the ep is down */
+	if (!musb_ep->desc) {
+		DBG(4, "req %p queued to %s while ep %s\n",
+				req, ep->name, "disabled");
+		status = -ESHUTDOWN;
+		goto cleanup;
+	}
+
+	/* add request to the list */
+	list_add_tail(&(request->request.list), &(musb_ep->req_list));
+
+	/* it this is the head of the queue, start i/o ... */
+	if (!musb_ep->busy && &request->request.list == musb_ep->req_list.next)
+		musb_ep_restart(musb, request);
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, lockflags);
+	return status;
+}
+
+static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	struct usb_request	*r;
+	unsigned long		flags;
+	int			status = 0;
+	struct musb		*musb = musb_ep->musb;
+
+	if (!ep || !request || to_musb_request(request)->ep != musb_ep)
+		return -EINVAL;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	list_for_each_entry(r, &musb_ep->req_list, list) {
+		if (r == request)
+			break;
+	}
+	if (r != request) {
+		DBG(3, "request %p not queued to %s\n", request, ep->name);
+		status = -EINVAL;
+		goto done;
+	}
+
+	/* if the hardware doesn't have the request, easy ... */
+	if (musb_ep->req_list.next != &request->list || musb_ep->busy)
+		musb_g_giveback(musb_ep, request, -ECONNRESET);
+
+	/* ... else abort the dma transfer ... */
+	else if (is_dma_capable() && musb_ep->dma) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		musb_ep_select(musb->mregs, musb_ep->current_epnum);
+		if (c->channel_abort)
+			status = c->channel_abort(musb_ep->dma);
+		else
+			status = -EBUSY;
+		if (status == 0)
+			musb_g_giveback(musb_ep, request, -ECONNRESET);
+	} else {
+		/* NOTE: by sticking to easily tested hardware/driver states,
+		 * we leave counting of in-flight packets imprecise.
+		 */
+		musb_g_giveback(musb_ep, request, -ECONNRESET);
+	}
+
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+/*
+ * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any
+ * data but will queue requests.
+ *
+ * exported to ep0 code
+ */
+int musb_gadget_set_halt(struct usb_ep *ep, int value)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	u8			epnum = musb_ep->current_epnum;
+	struct musb		*musb = musb_ep->musb;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	void __iomem		*mbase;
+	unsigned long		flags;
+	u16			csr;
+	struct musb_request	*request = NULL;
+	int			status = 0;
+
+	if (!ep)
+		return -EINVAL;
+	mbase = musb->mregs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if ((USB_ENDPOINT_XFER_ISOC == musb_ep->type)) {
+		status = -EINVAL;
+		goto done;
+	}
+
+	musb_ep_select(mbase, epnum);
+
+	/* cannot portably stall with non-empty FIFO */
+	request = to_musb_request(next_request(musb_ep));
+	if (value && musb_ep->is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+			DBG(3, "%s fifo busy, cannot halt\n", ep->name);
+			spin_unlock_irqrestore(&musb->lock, flags);
+			return -EAGAIN;
+		}
+
+	}
+
+	/* set/clear the stall and toggle bits */
+	DBG(2, "%s: %s stall\n", ep->name, value ? "set" : "clear");
+	if (musb_ep->is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+			csr |= MUSB_TXCSR_FLUSHFIFO;
+		csr |= MUSB_TXCSR_P_WZC_BITS
+			| MUSB_TXCSR_CLRDATATOG;
+		if (value)
+			csr |= MUSB_TXCSR_P_SENDSTALL;
+		else
+			csr &= ~(MUSB_TXCSR_P_SENDSTALL
+				| MUSB_TXCSR_P_SENTSTALL);
+		csr &= ~MUSB_TXCSR_TXPKTRDY;
+		musb_writew(epio, MUSB_TXCSR, csr);
+	} else {
+		csr = musb_readw(epio, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_P_WZC_BITS
+			| MUSB_RXCSR_FLUSHFIFO
+			| MUSB_RXCSR_CLRDATATOG;
+		if (value)
+			csr |= MUSB_RXCSR_P_SENDSTALL;
+		else
+			csr &= ~(MUSB_RXCSR_P_SENDSTALL
+				| MUSB_RXCSR_P_SENTSTALL);
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+done:
+
+	/* maybe start the first request in the queue */
+	if (!musb_ep->busy && !value && request) {
+		DBG(3, "restarting the request\n");
+		musb_ep_restart(musb, request);
+	}
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+static int musb_gadget_fifo_status(struct usb_ep *ep)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	void __iomem		*epio = musb_ep->hw_ep->regs;
+	int			retval = -EINVAL;
+
+	if (musb_ep->desc && !musb_ep->is_in) {
+		struct musb		*musb = musb_ep->musb;
+		int			epnum = musb_ep->current_epnum;
+		void __iomem		*mbase = musb->mregs;
+		unsigned long		flags;
+
+		spin_lock_irqsave(&musb->lock, flags);
+
+		musb_ep_select(mbase, epnum);
+		/* FIXME return zero unless RXPKTRDY is set */
+		retval = musb_readw(epio, MUSB_RXCOUNT);
+
+		spin_unlock_irqrestore(&musb->lock, flags);
+	}
+	return retval;
+}
+
+static void musb_gadget_fifo_flush(struct usb_ep *ep)
+{
+	struct musb_ep	*musb_ep = to_musb_ep(ep);
+	struct musb	*musb = musb_ep->musb;
+	u8		epnum = musb_ep->current_epnum;
+	void __iomem	*epio = musb->endpoints[epnum].regs;
+	void __iomem	*mbase;
+	unsigned long	flags;
+	u16		csr, int_txe;
+
+	mbase = musb->mregs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_ep_select(mbase, (u8) epnum);
+
+	/* disable interrupts */
+	int_txe = musb_readw(mbase, MUSB_INTRTXE);
+	musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
+
+	if (musb_ep->is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+			csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_P_WZC_BITS;
+			musb_writew(epio, MUSB_TXCSR, csr);
+			/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
+			musb_writew(epio, MUSB_TXCSR, csr);
+		}
+	} else {
+		csr = musb_readw(epio, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_P_WZC_BITS;
+		musb_writew(epio, MUSB_RXCSR, csr);
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+	/* re-enable interrupt */
+	musb_writew(mbase, MUSB_INTRTXE, int_txe);
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static const struct usb_ep_ops musb_ep_ops = {
+	.enable		= musb_gadget_enable,
+	.disable	= musb_gadget_disable,
+	.alloc_request	= musb_alloc_request,
+	.free_request	= musb_free_request,
+	.queue		= musb_gadget_queue,
+	.dequeue	= musb_gadget_dequeue,
+	.set_halt	= musb_gadget_set_halt,
+	.fifo_status	= musb_gadget_fifo_status,
+	.fifo_flush	= musb_gadget_fifo_flush
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int musb_gadget_get_frame(struct usb_gadget *gadget)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	return (int)musb_readw(musb->mregs, MUSB_FRAME);
+}
+
+static int musb_gadget_wakeup(struct usb_gadget *gadget)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+	void __iomem	*mregs = musb->mregs;
+	unsigned long	flags;
+	int		status = -EINVAL;
+	u8		power, devctl;
+	int		retries;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_B_PERIPHERAL:
+		/* NOTE:  OTG state machine doesn't include B_SUSPENDED;
+		 * that's part of the standard usb 1.1 state machine, and
+		 * doesn't affect OTG transitions.
+		 */
+		if (musb->may_wakeup && musb->is_suspended)
+			break;
+		goto done;
+	case OTG_STATE_B_IDLE:
+		/* Start SRP ... OTG not required. */
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		DBG(2, "Sending SRP: devctl: %02x\n", devctl);
+		devctl |= MUSB_DEVCTL_SESSION;
+		musb_writeb(mregs, MUSB_DEVCTL, devctl);
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		retries = 100;
+		while (!(devctl & MUSB_DEVCTL_SESSION)) {
+			devctl = musb_readb(mregs, MUSB_DEVCTL);
+			if (retries-- < 1)
+				break;
+		}
+		retries = 10000;
+		while (devctl & MUSB_DEVCTL_SESSION) {
+			devctl = musb_readb(mregs, MUSB_DEVCTL);
+			if (retries-- < 1)
+				break;
+		}
+
+		/* Block idling for at least 1s */
+		musb_platform_try_idle(musb,
+			jiffies + msecs_to_jiffies(1 * HZ));
+
+		status = 0;
+		goto done;
+	default:
+		DBG(2, "Unhandled wake: %s\n", otg_state_string(musb));
+		goto done;
+	}
+
+	status = 0;
+
+	power = musb_readb(mregs, MUSB_POWER);
+	power |= MUSB_POWER_RESUME;
+	musb_writeb(mregs, MUSB_POWER, power);
+	DBG(2, "issue wakeup\n");
+
+	/* FIXME do this next chunk in a timer callback, no udelay */
+	mdelay(2);
+
+	power = musb_readb(mregs, MUSB_POWER);
+	power &= ~MUSB_POWER_RESUME;
+	musb_writeb(mregs, MUSB_POWER, power);
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+static int
+musb_gadget_set_self_powered(struct usb_gadget *gadget, int is_selfpowered)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	musb->is_self_powered = !!is_selfpowered;
+	return 0;
+}
+
+static void musb_pullup(struct musb *musb, int is_on)
+{
+	u8 power;
+
+	power = musb_readb(musb->mregs, MUSB_POWER);
+	if (is_on)
+		power |= MUSB_POWER_SOFTCONN;
+	else
+		power &= ~MUSB_POWER_SOFTCONN;
+
+	/* FIXME if on, HdrcStart; if off, HdrcStop */
+
+	DBG(3, "gadget %s D+ pullup %s\n",
+		musb->gadget_driver->function, is_on ? "on" : "off");
+	musb_writeb(musb->mregs, MUSB_POWER, power);
+}
+
+#if 0
+static int musb_gadget_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	DBG(2, "<= %s =>\n", __func__);
+
+	/*
+	 * FIXME iff driver's softconnect flag is set (as it is during probe,
+	 * though that can clear it), just musb_pullup().
+	 */
+
+	return -EINVAL;
+}
+#endif
+
+static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	if (!musb->xceiv.set_power)
+		return -EOPNOTSUPP;
+	return otg_set_power(&musb->xceiv, mA);
+}
+
+static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+	unsigned long	flags;
+
+	is_on = !!is_on;
+
+	/* NOTE: this assumes we are sensing vbus; we'd rather
+	 * not pullup unless the B-session is active.
+	 */
+	spin_lock_irqsave(&musb->lock, flags);
+	if (is_on != musb->softconnect) {
+		musb->softconnect = is_on;
+		musb_pullup(musb, is_on);
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return 0;
+}
+
+static const struct usb_gadget_ops musb_gadget_operations = {
+	.get_frame		= musb_gadget_get_frame,
+	.wakeup			= musb_gadget_wakeup,
+	.set_selfpowered	= musb_gadget_set_self_powered,
+	/* .vbus_session		= musb_gadget_vbus_session, */
+	.vbus_draw		= musb_gadget_vbus_draw,
+	.pullup			= musb_gadget_pullup,
+};
+
+/* ----------------------------------------------------------------------- */
+
+/* Registration */
+
+/* Only this registration code "knows" the rule (from USB standards)
+ * about there being only one external upstream port.  It assumes
+ * all peripheral ports are external...
+ */
+static struct musb *the_gadget;
+
+static void musb_gadget_release(struct device *dev)
+{
+	/* kref_put(WHAT) */
+	dev_dbg(dev, "%s\n", __func__);
+}
+
+
+static void __init
+init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
+{
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+
+	memset(ep, 0, sizeof *ep);
+
+	ep->current_epnum = epnum;
+	ep->musb = musb;
+	ep->hw_ep = hw_ep;
+	ep->is_in = is_in;
+
+	INIT_LIST_HEAD(&ep->req_list);
+
+	sprintf(ep->name, "ep%d%s", epnum,
+			(!epnum || hw_ep->is_shared_fifo) ? "" : (
+				is_in ? "in" : "out"));
+	ep->end_point.name = ep->name;
+	INIT_LIST_HEAD(&ep->end_point.ep_list);
+	if (!epnum) {
+		ep->end_point.maxpacket = 64;
+		ep->end_point.ops = &musb_g_ep0_ops;
+		musb->g.ep0 = &ep->end_point;
+	} else {
+		if (is_in)
+			ep->end_point.maxpacket = hw_ep->max_packet_sz_tx;
+		else
+			ep->end_point.maxpacket = hw_ep->max_packet_sz_rx;
+		ep->end_point.ops = &musb_ep_ops;
+		list_add_tail(&ep->end_point.ep_list, &musb->g.ep_list);
+	}
+}
+
+/*
+ * Initialize the endpoints exposed to peripheral drivers, with backlinks
+ * to the rest of the driver state.
+ */
+static inline void __init musb_g_init_endpoints(struct musb *musb)
+{
+	u8			epnum;
+	struct musb_hw_ep	*hw_ep;
+	unsigned		count = 0;
+
+	/* intialize endpoint list just once */
+	INIT_LIST_HEAD(&(musb->g.ep_list));
+
+	for (epnum = 0, hw_ep = musb->endpoints;
+			epnum < musb->nr_endpoints;
+			epnum++, hw_ep++) {
+		if (hw_ep->is_shared_fifo /* || !epnum */) {
+			init_peripheral_ep(musb, &hw_ep->ep_in, epnum, 0);
+			count++;
+		} else {
+			if (hw_ep->max_packet_sz_tx) {
+				init_peripheral_ep(musb, &hw_ep->ep_in,
+							epnum, 1);
+				count++;
+			}
+			if (hw_ep->max_packet_sz_rx) {
+				init_peripheral_ep(musb, &hw_ep->ep_out,
+							epnum, 0);
+				count++;
+			}
+		}
+	}
+}
+
+/* called once during driver setup to initialize and link into
+ * the driver model; memory is zeroed.
+ */
+int __init musb_gadget_setup(struct musb *musb)
+{
+	int status;
+
+	/* REVISIT minor race:  if (erroneously) setting up two
+	 * musb peripherals at the same time, only the bus lock
+	 * is probably held.
+	 */
+	if (the_gadget)
+		return -EBUSY;
+	the_gadget = musb;
+
+	musb->g.ops = &musb_gadget_operations;
+	musb->g.is_dualspeed = 1;
+	musb->g.speed = USB_SPEED_UNKNOWN;
+
+	/* this "gadget" abstracts/virtualizes the controller */
+	strcpy(musb->g.dev.bus_id, "gadget");
+	musb->g.dev.parent = musb->controller;
+	musb->g.dev.dma_mask = musb->controller->dma_mask;
+	musb->g.dev.release = musb_gadget_release;
+	musb->g.name = musb_driver_name;
+
+	if (is_otg_enabled(musb))
+		musb->g.is_otg = 1;
+
+	musb_g_init_endpoints(musb);
+
+	musb->is_active = 0;
+	musb_platform_try_idle(musb, 0);
+
+	status = device_register(&musb->g.dev);
+	if (status != 0)
+		the_gadget = NULL;
+	return status;
+}
+
+void musb_gadget_cleanup(struct musb *musb)
+{
+	if (musb != the_gadget)
+		return;
+
+	device_unregister(&musb->g.dev);
+	the_gadget = NULL;
+}
+
+/*
+ * Register the gadget driver. Used by gadget drivers when
+ * registering themselves with the controller.
+ *
+ * -EINVAL something went wrong (not driver)
+ * -EBUSY another gadget is already using the controller
+ * -ENOMEM no memeory to perform the operation
+ *
+ * @param driver the gadget driver
+ * @return <0 if error, 0 if everything is fine
+ */
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+	int retval;
+	unsigned long flags;
+	struct musb *musb = the_gadget;
+
+	if (!driver
+			|| driver->speed != USB_SPEED_HIGH
+			|| !driver->bind
+			|| !driver->setup)
+		return -EINVAL;
+
+	/* driver must be initialized to support peripheral mode */
+	if (!musb || !(musb->board_mode == MUSB_OTG
+				|| musb->board_mode != MUSB_OTG)) {
+		DBG(1, "%s, no dev??\n", __func__);
+		return -ENODEV;
+	}
+
+	DBG(3, "registering driver %s\n", driver->function);
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb->gadget_driver) {
+		DBG(1, "%s is already bound to %s\n",
+				musb_driver_name,
+				musb->gadget_driver->driver.name);
+		retval = -EBUSY;
+	} else {
+		musb->gadget_driver = driver;
+		musb->g.dev.driver = &driver->driver;
+		driver->driver.bus = NULL;
+		musb->softconnect = 1;
+		retval = 0;
+	}
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (retval == 0)
+		retval = driver->bind(&musb->g);
+	if (retval != 0) {
+		DBG(3, "bind to driver %s failed --> %d\n",
+			driver->driver.name, retval);
+		musb->gadget_driver = NULL;
+		musb->g.dev.driver = NULL;
+	}
+
+	/* start peripheral and/or OTG engines */
+	if (retval == 0) {
+		spin_lock_irqsave(&musb->lock, flags);
+
+		/* REVISIT always use otg_set_peripheral(), handling
+		 * issues including the root hub one below ...
+		 */
+		musb->xceiv.gadget = &musb->g;
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+		musb->is_active = 1;
+
+		/* FIXME this ignores the softconnect flag.  Drivers are
+		 * allowed hold the peripheral inactive until for example
+		 * userspace hooks up printer hardware or DSP codecs, so
+		 * hosts only see fully functional devices.
+		 */
+
+		if (!is_otg_enabled(musb))
+			musb_start(musb);
+
+		spin_unlock_irqrestore(&musb->lock, flags);
+
+		if (is_otg_enabled(musb)) {
+			DBG(3, "OTG startup...\n");
+
+			/* REVISIT:  funcall to other code, which also
+			 * handles power budgeting ... this way also
+			 * ensures HdrcStart is indirectly called.
+			 */
+			retval = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+			if (retval < 0) {
+				DBG(1, "add_hcd failed, %d\n", retval);
+				spin_lock_irqsave(&musb->lock, flags);
+				musb->xceiv.gadget = NULL;
+				musb->xceiv.state = OTG_STATE_UNDEFINED;
+				musb->gadget_driver = NULL;
+				musb->g.dev.driver = NULL;
+				spin_unlock_irqrestore(&musb->lock, flags);
+			}
+		}
+	}
+
+	return retval;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
+{
+	int			i;
+	struct musb_hw_ep	*hw_ep;
+
+	/* don't disconnect if it's not connected */
+	if (musb->g.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+	else
+		musb->g.speed = USB_SPEED_UNKNOWN;
+
+	/* deactivate the hardware */
+	if (musb->softconnect) {
+		musb->softconnect = 0;
+		musb_pullup(musb, 0);
+	}
+	musb_stop(musb);
+
+	/* killing any outstanding requests will quiesce the driver;
+	 * then report disconnect
+	 */
+	if (driver) {
+		for (i = 0, hw_ep = musb->endpoints;
+				i < musb->nr_endpoints;
+				i++, hw_ep++) {
+			musb_ep_select(musb->mregs, i);
+			if (hw_ep->is_shared_fifo /* || !epnum */) {
+				nuke(&hw_ep->ep_in, -ESHUTDOWN);
+			} else {
+				if (hw_ep->max_packet_sz_tx)
+					nuke(&hw_ep->ep_in, -ESHUTDOWN);
+				if (hw_ep->max_packet_sz_rx)
+					nuke(&hw_ep->ep_out, -ESHUTDOWN);
+			}
+		}
+
+		spin_unlock(&musb->lock);
+		driver->disconnect(&musb->g);
+		spin_lock(&musb->lock);
+	}
+}
+
+/*
+ * Unregister the gadget driver. Used by gadget drivers when
+ * unregistering themselves from the controller.
+ *
+ * @param driver the gadget driver to unregister
+ */
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	unsigned long	flags;
+	int		retval = 0;
+	struct musb	*musb = the_gadget;
+
+	if (!driver || !driver->unbind || !musb)
+		return -EINVAL;
+
+	/* REVISIT always use otg_set_peripheral() here too;
+	 * this needs to shut down the OTG engine.
+	 */
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+#ifdef	CONFIG_USB_MUSB_OTG
+	musb_hnp_stop(musb);
+#endif
+
+	if (musb->gadget_driver == driver) {
+
+		(void) musb_gadget_vbus_draw(&musb->g, 0);
+
+		musb->xceiv.state = OTG_STATE_UNDEFINED;
+		stop_activity(musb, driver);
+
+		DBG(3, "unregistering driver %s\n", driver->function);
+		spin_unlock_irqrestore(&musb->lock, flags);
+		driver->unbind(&musb->g);
+		spin_lock_irqsave(&musb->lock, flags);
+
+		musb->gadget_driver = NULL;
+		musb->g.dev.driver = NULL;
+
+		musb->is_active = 0;
+		musb_platform_try_idle(musb, 0);
+	} else
+		retval = -EINVAL;
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (is_otg_enabled(musb) && retval == 0) {
+		usb_remove_hcd(musb_to_hcd(musb));
+		/* FIXME we need to be able to register another
+		 * gadget driver here and have everything work;
+		 * that currently misbehaves.
+		 */
+	}
+
+	return retval;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+
+/* ----------------------------------------------------------------------- */
+
+/* lifecycle operations called through plat_uds.c */
+
+void musb_g_resume(struct musb *musb)
+{
+	musb->is_suspended = 0;
+	switch (musb->xceiv.state) {
+	case OTG_STATE_B_IDLE:
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+	case OTG_STATE_B_PERIPHERAL:
+		musb->is_active = 1;
+		if (musb->gadget_driver && musb->gadget_driver->resume) {
+			spin_unlock(&musb->lock);
+			musb->gadget_driver->resume(&musb->g);
+			spin_lock(&musb->lock);
+		}
+		break;
+	default:
+		WARNING("unhandled RESUME transition (%s)\n",
+				otg_state_string(musb));
+	}
+}
+
+/* called when SOF packets stop for 3+ msec */
+void musb_g_suspend(struct musb *musb)
+{
+	u8	devctl;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+	DBG(3, "devctl %02x\n", devctl);
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_B_IDLE:
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		musb->is_suspended = 1;
+		if (musb->gadget_driver && musb->gadget_driver->suspend) {
+			spin_unlock(&musb->lock);
+			musb->gadget_driver->suspend(&musb->g);
+			spin_lock(&musb->lock);
+		}
+		break;
+	default:
+		/* REVISIT if B_HOST, clear DEVCTL.HOSTREQ;
+		 * A_PERIPHERAL may need care too
+		 */
+		WARNING("unhandled SUSPEND transition (%s)\n",
+				otg_state_string(musb));
+	}
+}
+
+/* Called during SRP */
+void musb_g_wakeup(struct musb *musb)
+{
+	musb_gadget_wakeup(&musb->g);
+}
+
+/* called when VBUS drops below session threshold, and in other cases */
+void musb_g_disconnect(struct musb *musb)
+{
+	void __iomem	*mregs = musb->mregs;
+	u8	devctl = musb_readb(mregs, MUSB_DEVCTL);
+
+	DBG(3, "devctl %02x\n", devctl);
+
+	/* clear HR */
+	musb_writeb(mregs, MUSB_DEVCTL, devctl & MUSB_DEVCTL_SESSION);
+
+	/* don't draw vbus until new b-default session */
+	(void) musb_gadget_vbus_draw(&musb->g, 0);
+
+	musb->g.speed = USB_SPEED_UNKNOWN;
+	if (musb->gadget_driver && musb->gadget_driver->disconnect) {
+		spin_unlock(&musb->lock);
+		musb->gadget_driver->disconnect(&musb->g);
+		spin_lock(&musb->lock);
+	}
+
+	switch (musb->xceiv.state) {
+	default:
+#ifdef	CONFIG_USB_MUSB_OTG
+		DBG(2, "Unhandled disconnect %s, setting a_idle\n",
+			otg_state_string(musb));
+		musb->xceiv.state = OTG_STATE_A_IDLE;
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+	case OTG_STATE_B_HOST:
+#endif
+	case OTG_STATE_B_PERIPHERAL:
+	case OTG_STATE_B_IDLE:
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+		break;
+	case OTG_STATE_B_SRP_INIT:
+		break;
+	}
+
+	musb->is_active = 0;
+}
+
+void musb_g_reset(struct musb *musb)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	void __iomem	*mbase = musb->mregs;
+	u8		devctl = musb_readb(mbase, MUSB_DEVCTL);
+	u8		power;
+
+	DBG(3, "<== %s addr=%x driver '%s'\n",
+			(devctl & MUSB_DEVCTL_BDEVICE)
+				? "B-Device" : "A-Device",
+			musb_readb(mbase, MUSB_FADDR),
+			musb->gadget_driver
+				? musb->gadget_driver->driver.name
+				: NULL
+			);
+
+	/* report disconnect, if we didn't already (flushing EP state) */
+	if (musb->g.speed != USB_SPEED_UNKNOWN)
+		musb_g_disconnect(musb);
+
+	/* clear HR */
+	else if (devctl & MUSB_DEVCTL_HR)
+		musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+
+
+	/* what speed did we negotiate? */
+	power = musb_readb(mbase, MUSB_POWER);
+	musb->g.speed = (power & MUSB_POWER_HSMODE)
+			? USB_SPEED_HIGH : USB_SPEED_FULL;
+
+	/* start in USB_STATE_DEFAULT */
+	musb->is_active = 1;
+	musb->is_suspended = 0;
+	MUSB_DEV_MODE(musb);
+	musb->address = 0;
+	musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+
+	musb->may_wakeup = 0;
+	musb->g.b_hnp_enable = 0;
+	musb->g.a_alt_hnp_support = 0;
+	musb->g.a_hnp_support = 0;
+
+	/* Normal reset, as B-Device;
+	 * or else after HNP, as A-Device
+	 */
+	if (devctl & MUSB_DEVCTL_BDEVICE) {
+		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		musb->g.is_a_peripheral = 0;
+	} else if (is_otg_enabled(musb)) {
+		musb->xceiv.state = OTG_STATE_A_PERIPHERAL;
+		musb->g.is_a_peripheral = 1;
+	} else
+		WARN_ON(1);
+
+	/* start with default limits on VBUS power draw */
+	(void) musb_gadget_vbus_draw(&musb->g,
+			is_otg_enabled(musb) ? 8 : 100);
+}
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
new file mode 100644
index 000000000000..59502da9f739
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget.h
@@ -0,0 +1,108 @@
+/*
+ * MUSB OTG driver peripheral defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_GADGET_H
+#define __MUSB_GADGET_H
+
+struct musb_request {
+	struct usb_request	request;
+	struct musb_ep		*ep;
+	struct musb		*musb;
+	u8 tx;			/* endpoint direction */
+	u8 epnum;
+	u8 mapped;
+};
+
+static inline struct musb_request *to_musb_request(struct usb_request *req)
+{
+	return req ? container_of(req, struct musb_request, request) : NULL;
+}
+
+extern struct usb_request *
+musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags);
+extern void musb_free_request(struct usb_ep *ep, struct usb_request *req);
+
+
+/*
+ * struct musb_ep - peripheral side view of endpoint rx or tx side
+ */
+struct musb_ep {
+	/* stuff towards the head is basically write-once. */
+	struct usb_ep			end_point;
+	char				name[12];
+	struct musb_hw_ep		*hw_ep;
+	struct musb			*musb;
+	u8				current_epnum;
+
+	/* ... when enabled/disabled ... */
+	u8				type;
+	u8				is_in;
+	u16				packet_sz;
+	const struct usb_endpoint_descriptor	*desc;
+	struct dma_channel		*dma;
+
+	/* later things are modified based on usage */
+	struct list_head		req_list;
+
+	/* true if lock must be dropped but req_list may not be advanced */
+	u8				busy;
+};
+
+static inline struct musb_ep *to_musb_ep(struct usb_ep *ep)
+{
+	return ep ? container_of(ep, struct musb_ep, end_point) : NULL;
+}
+
+static inline struct usb_request *next_request(struct musb_ep *ep)
+{
+	struct list_head	*queue = &ep->req_list;
+
+	if (list_empty(queue))
+		return NULL;
+	return container_of(queue->next, struct usb_request, list);
+}
+
+extern void musb_g_tx(struct musb *musb, u8 epnum);
+extern void musb_g_rx(struct musb *musb, u8 epnum);
+
+extern const struct usb_ep_ops musb_g_ep0_ops;
+
+extern int musb_gadget_setup(struct musb *);
+extern void musb_gadget_cleanup(struct musb *);
+
+extern void musb_g_giveback(struct musb_ep *, struct usb_request *, int);
+
+extern int musb_gadget_set_halt(struct usb_ep *ep, int value);
+
+#endif		/* __MUSB_GADGET_H */
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
new file mode 100644
index 000000000000..48d7d3ccb243
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -0,0 +1,981 @@
+/*
+ * MUSB OTG peripheral driver ep0 handling
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+
+#include "musb_core.h"
+
+/* ep0 is always musb->endpoints[0].ep_in */
+#define	next_ep0_request(musb)	next_in_request(&(musb)->endpoints[0])
+
+/*
+ * locking note:  we use only the controller lock, for simpler correctness.
+ * It's always held with IRQs blocked.
+ *
+ * It protects the ep0 request queue as well as ep0_state, not just the
+ * controller and indexed registers.  And that lock stays held unless it
+ * needs to be dropped to allow reentering this driver ... like upcalls to
+ * the gadget driver, or adjusting endpoint halt status.
+ */
+
+static char *decode_ep0stage(u8 stage)
+{
+	switch (stage) {
+	case MUSB_EP0_STAGE_SETUP:	return "idle";
+	case MUSB_EP0_STAGE_TX:		return "in";
+	case MUSB_EP0_STAGE_RX:		return "out";
+	case MUSB_EP0_STAGE_ACKWAIT:	return "wait";
+	case MUSB_EP0_STAGE_STATUSIN:	return "in/status";
+	case MUSB_EP0_STAGE_STATUSOUT:	return "out/status";
+	default:			return "?";
+	}
+}
+
+/* handle a standard GET_STATUS request
+ * Context:  caller holds controller lock
+ */
+static int service_tx_status_request(
+	struct musb *musb,
+	const struct usb_ctrlrequest *ctrlrequest)
+{
+	void __iomem	*mbase = musb->mregs;
+	int handled = 1;
+	u8 result[2], epnum = 0;
+	const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
+
+	result[1] = 0;
+
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		result[0] = musb->is_self_powered << USB_DEVICE_SELF_POWERED;
+		result[0] |= musb->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+#ifdef CONFIG_USB_MUSB_OTG
+		if (musb->g.is_otg) {
+			result[0] |= musb->g.b_hnp_enable
+				<< USB_DEVICE_B_HNP_ENABLE;
+			result[0] |= musb->g.a_alt_hnp_support
+				<< USB_DEVICE_A_ALT_HNP_SUPPORT;
+			result[0] |= musb->g.a_hnp_support
+				<< USB_DEVICE_A_HNP_SUPPORT;
+		}
+#endif
+		break;
+
+	case USB_RECIP_INTERFACE:
+		result[0] = 0;
+		break;
+
+	case USB_RECIP_ENDPOINT: {
+		int		is_in;
+		struct musb_ep	*ep;
+		u16		tmp;
+		void __iomem	*regs;
+
+		epnum = (u8) ctrlrequest->wIndex;
+		if (!epnum) {
+			result[0] = 0;
+			break;
+		}
+
+		is_in = epnum & USB_DIR_IN;
+		if (is_in) {
+			epnum &= 0x0f;
+			ep = &musb->endpoints[epnum].ep_in;
+		} else {
+			ep = &musb->endpoints[epnum].ep_out;
+		}
+		regs = musb->endpoints[epnum].regs;
+
+		if (epnum >= MUSB_C_NUM_EPS || !ep->desc) {
+			handled = -EINVAL;
+			break;
+		}
+
+		musb_ep_select(mbase, epnum);
+		if (is_in)
+			tmp = musb_readw(regs, MUSB_TXCSR)
+						& MUSB_TXCSR_P_SENDSTALL;
+		else
+			tmp = musb_readw(regs, MUSB_RXCSR)
+						& MUSB_RXCSR_P_SENDSTALL;
+		musb_ep_select(mbase, 0);
+
+		result[0] = tmp ? 1 : 0;
+		} break;
+
+	default:
+		/* class, vendor, etc ... delegate */
+		handled = 0;
+		break;
+	}
+
+	/* fill up the fifo; caller updates csr0 */
+	if (handled > 0) {
+		u16	len = le16_to_cpu(ctrlrequest->wLength);
+
+		if (len > 2)
+			len = 2;
+		musb_write_fifo(&musb->endpoints[0], len, result);
+	}
+
+	return handled;
+}
+
+/*
+ * handle a control-IN request, the end0 buffer contains the current request
+ * that is supposed to be a standard control request. Assumes the fifo to
+ * be at least 2 bytes long.
+ *
+ * @return 0 if the request was NOT HANDLED,
+ * < 0 when error
+ * > 0 when the request is processed
+ *
+ * Context:  caller holds controller lock
+ */
+static int
+service_in_request(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
+{
+	int handled = 0;	/* not handled */
+
+	if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
+			== USB_TYPE_STANDARD) {
+		switch (ctrlrequest->bRequest) {
+		case USB_REQ_GET_STATUS:
+			handled = service_tx_status_request(musb,
+					ctrlrequest);
+			break;
+
+		/* case USB_REQ_SYNC_FRAME: */
+
+		default:
+			break;
+		}
+	}
+	return handled;
+}
+
+/*
+ * Context:  caller holds controller lock
+ */
+static void musb_g_ep0_giveback(struct musb *musb, struct usb_request *req)
+{
+	musb_g_giveback(&musb->endpoints[0].ep_in, req, 0);
+	musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+}
+
+/*
+ * Tries to start B-device HNP negotiation if enabled via sysfs
+ */
+static inline void musb_try_b_hnp_enable(struct musb *musb)
+{
+	void __iomem	*mbase = musb->mregs;
+	u8		devctl;
+
+	DBG(1, "HNP: Setting HR\n");
+	devctl = musb_readb(mbase, MUSB_DEVCTL);
+	musb_writeb(mbase, MUSB_DEVCTL, devctl | MUSB_DEVCTL_HR);
+}
+
+/*
+ * Handle all control requests with no DATA stage, including standard
+ * requests such as:
+ * USB_REQ_SET_CONFIGURATION, USB_REQ_SET_INTERFACE, unrecognized
+ *	always delegated to the gadget driver
+ * USB_REQ_SET_ADDRESS, USB_REQ_CLEAR_FEATURE, USB_REQ_SET_FEATURE
+ *	always handled here, except for class/vendor/... features
+ *
+ * Context:  caller holds controller lock
+ */
+static int
+service_zero_data_request(struct musb *musb,
+		struct usb_ctrlrequest *ctrlrequest)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	int handled = -EINVAL;
+	void __iomem *mbase = musb->mregs;
+	const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
+
+	/* the gadget driver handles everything except what we MUST handle */
+	if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
+			== USB_TYPE_STANDARD) {
+		switch (ctrlrequest->bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			/* change it after the status stage */
+			musb->set_address = true;
+			musb->address = (u8) (ctrlrequest->wValue & 0x7f);
+			handled = 1;
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+			switch (recip) {
+			case USB_RECIP_DEVICE:
+				if (ctrlrequest->wValue
+						!= USB_DEVICE_REMOTE_WAKEUP)
+					break;
+				musb->may_wakeup = 0;
+				handled = 1;
+				break;
+			case USB_RECIP_INTERFACE:
+				break;
+			case USB_RECIP_ENDPOINT:{
+				const u8 num = ctrlrequest->wIndex & 0x0f;
+				struct musb_ep *musb_ep;
+
+				if (num == 0
+						|| num >= MUSB_C_NUM_EPS
+						|| ctrlrequest->wValue
+							!= USB_ENDPOINT_HALT)
+					break;
+
+				if (ctrlrequest->wIndex & USB_DIR_IN)
+					musb_ep = &musb->endpoints[num].ep_in;
+				else
+					musb_ep = &musb->endpoints[num].ep_out;
+				if (!musb_ep->desc)
+					break;
+
+				/* REVISIT do it directly, no locking games */
+				spin_unlock(&musb->lock);
+				musb_gadget_set_halt(&musb_ep->end_point, 0);
+				spin_lock(&musb->lock);
+
+				/* select ep0 again */
+				musb_ep_select(mbase, 0);
+				handled = 1;
+				} break;
+			default:
+				/* class, vendor, etc ... delegate */
+				handled = 0;
+				break;
+			}
+			break;
+
+		case USB_REQ_SET_FEATURE:
+			switch (recip) {
+			case USB_RECIP_DEVICE:
+				handled = 1;
+				switch (ctrlrequest->wValue) {
+				case USB_DEVICE_REMOTE_WAKEUP:
+					musb->may_wakeup = 1;
+					break;
+				case USB_DEVICE_TEST_MODE:
+					if (musb->g.speed != USB_SPEED_HIGH)
+						goto stall;
+					if (ctrlrequest->wIndex & 0xff)
+						goto stall;
+
+					switch (ctrlrequest->wIndex >> 8) {
+					case 1:
+						pr_debug("TEST_J\n");
+						/* TEST_J */
+						musb->test_mode_nr =
+							MUSB_TEST_J;
+						break;
+					case 2:
+						/* TEST_K */
+						pr_debug("TEST_K\n");
+						musb->test_mode_nr =
+							MUSB_TEST_K;
+						break;
+					case 3:
+						/* TEST_SE0_NAK */
+						pr_debug("TEST_SE0_NAK\n");
+						musb->test_mode_nr =
+							MUSB_TEST_SE0_NAK;
+						break;
+					case 4:
+						/* TEST_PACKET */
+						pr_debug("TEST_PACKET\n");
+						musb->test_mode_nr =
+							MUSB_TEST_PACKET;
+						break;
+					default:
+						goto stall;
+					}
+
+					/* enter test mode after irq */
+					if (handled > 0)
+						musb->test_mode = true;
+					break;
+#ifdef CONFIG_USB_MUSB_OTG
+				case USB_DEVICE_B_HNP_ENABLE:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.b_hnp_enable = 1;
+					musb_try_b_hnp_enable(musb);
+					break;
+				case USB_DEVICE_A_HNP_SUPPORT:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.a_hnp_support = 1;
+					break;
+				case USB_DEVICE_A_ALT_HNP_SUPPORT:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.a_alt_hnp_support = 1;
+					break;
+#endif
+stall:
+				default:
+					handled = -EINVAL;
+					break;
+				}
+				break;
+
+			case USB_RECIP_INTERFACE:
+				break;
+
+			case USB_RECIP_ENDPOINT:{
+				const u8		epnum =
+					ctrlrequest->wIndex & 0x0f;
+				struct musb_ep		*musb_ep;
+				struct musb_hw_ep	*ep;
+				void __iomem		*regs;
+				int			is_in;
+				u16			csr;
+
+				if (epnum == 0
+						|| epnum >= MUSB_C_NUM_EPS
+						|| ctrlrequest->wValue
+							!= USB_ENDPOINT_HALT)
+					break;
+
+				ep = musb->endpoints + epnum;
+				regs = ep->regs;
+				is_in = ctrlrequest->wIndex & USB_DIR_IN;
+				if (is_in)
+					musb_ep = &ep->ep_in;
+				else
+					musb_ep = &ep->ep_out;
+				if (!musb_ep->desc)
+					break;
+
+				musb_ep_select(mbase, epnum);
+				if (is_in) {
+					csr = musb_readw(regs,
+							MUSB_TXCSR);
+					if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+						csr |= MUSB_TXCSR_FLUSHFIFO;
+					csr |= MUSB_TXCSR_P_SENDSTALL
+						| MUSB_TXCSR_CLRDATATOG
+						| MUSB_TXCSR_P_WZC_BITS;
+					musb_writew(regs, MUSB_TXCSR,
+							csr);
+				} else {
+					csr = musb_readw(regs,
+							MUSB_RXCSR);
+					csr |= MUSB_RXCSR_P_SENDSTALL
+						| MUSB_RXCSR_FLUSHFIFO
+						| MUSB_RXCSR_CLRDATATOG
+						| MUSB_TXCSR_P_WZC_BITS;
+					musb_writew(regs, MUSB_RXCSR,
+							csr);
+				}
+
+				/* select ep0 again */
+				musb_ep_select(mbase, 0);
+				handled = 1;
+				} break;
+
+			default:
+				/* class, vendor, etc ... delegate */
+				handled = 0;
+				break;
+			}
+			break;
+		default:
+			/* delegate SET_CONFIGURATION, etc */
+			handled = 0;
+		}
+	} else
+		handled = 0;
+	return handled;
+}
+
+/* we have an ep0out data packet
+ * Context:  caller holds controller lock
+ */
+static void ep0_rxstate(struct musb *musb)
+{
+	void __iomem		*regs = musb->control_ep->regs;
+	struct usb_request	*req;
+	u16			tmp;
+
+	req = next_ep0_request(musb);
+
+	/* read packet and ack; or stall because of gadget driver bug:
+	 * should have provided the rx buffer before setup() returned.
+	 */
+	if (req) {
+		void		*buf = req->buf + req->actual;
+		unsigned	len = req->length - req->actual;
+
+		/* read the buffer */
+		tmp = musb_readb(regs, MUSB_COUNT0);
+		if (tmp > len) {
+			req->status = -EOVERFLOW;
+			tmp = len;
+		}
+		musb_read_fifo(&musb->endpoints[0], tmp, buf);
+		req->actual += tmp;
+		tmp = MUSB_CSR0_P_SVDRXPKTRDY;
+		if (tmp < 64 || req->actual == req->length) {
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+			tmp |= MUSB_CSR0_P_DATAEND;
+		} else
+			req = NULL;
+	} else
+		tmp = MUSB_CSR0_P_SVDRXPKTRDY | MUSB_CSR0_P_SENDSTALL;
+
+
+	/* Completion handler may choose to stall, e.g. because the
+	 * message just received holds invalid data.
+	 */
+	if (req) {
+		musb->ackpend = tmp;
+		musb_g_ep0_giveback(musb, req);
+		if (!musb->ackpend)
+			return;
+		musb->ackpend = 0;
+	}
+	musb_writew(regs, MUSB_CSR0, tmp);
+}
+
+/*
+ * transmitting to the host (IN), this code might be called from IRQ
+ * and from kernel thread.
+ *
+ * Context:  caller holds controller lock
+ */
+static void ep0_txstate(struct musb *musb)
+{
+	void __iomem		*regs = musb->control_ep->regs;
+	struct usb_request	*request = next_ep0_request(musb);
+	u16			csr = MUSB_CSR0_TXPKTRDY;
+	u8			*fifo_src;
+	u8			fifo_count;
+
+	if (!request) {
+		/* WARN_ON(1); */
+		DBG(2, "odd; csr0 %04x\n", musb_readw(regs, MUSB_CSR0));
+		return;
+	}
+
+	/* load the data */
+	fifo_src = (u8 *) request->buf + request->actual;
+	fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE,
+		request->length - request->actual);
+	musb_write_fifo(&musb->endpoints[0], fifo_count, fifo_src);
+	request->actual += fifo_count;
+
+	/* update the flags */
+	if (fifo_count < MUSB_MAX_END0_PACKET
+			|| request->actual == request->length) {
+		musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
+		csr |= MUSB_CSR0_P_DATAEND;
+	} else
+		request = NULL;
+
+	/* report completions as soon as the fifo's loaded; there's no
+	 * win in waiting till this last packet gets acked.  (other than
+	 * very precise fault reporting, needed by USB TMC; possible with
+	 * this hardware, but not usable from portable gadget drivers.)
+	 */
+	if (request) {
+		musb->ackpend = csr;
+		musb_g_ep0_giveback(musb, request);
+		if (!musb->ackpend)
+			return;
+		musb->ackpend = 0;
+	}
+
+	/* send it out, triggering a "txpktrdy cleared" irq */
+	musb_writew(regs, MUSB_CSR0, csr);
+}
+
+/*
+ * Read a SETUP packet (struct usb_ctrlrequest) from the hardware.
+ * Fields are left in USB byte-order.
+ *
+ * Context:  caller holds controller lock.
+ */
+static void
+musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req)
+{
+	struct usb_request	*r;
+	void __iomem		*regs = musb->control_ep->regs;
+
+	musb_read_fifo(&musb->endpoints[0], sizeof *req, (u8 *)req);
+
+	/* NOTE:  earlier 2.6 versions changed setup packets to host
+	 * order, but now USB packets always stay in USB byte order.
+	 */
+	DBG(3, "SETUP req%02x.%02x v%04x i%04x l%d\n",
+		req->bRequestType,
+		req->bRequest,
+		le16_to_cpu(req->wValue),
+		le16_to_cpu(req->wIndex),
+		le16_to_cpu(req->wLength));
+
+	/* clean up any leftover transfers */
+	r = next_ep0_request(musb);
+	if (r)
+		musb_g_ep0_giveback(musb, r);
+
+	/* For zero-data requests we want to delay the STATUS stage to
+	 * avoid SETUPEND errors.  If we read data (OUT), delay accepting
+	 * packets until there's a buffer to store them in.
+	 *
+	 * If we write data, the controller acts happier if we enable
+	 * the TX FIFO right away, and give the controller a moment
+	 * to switch modes...
+	 */
+	musb->set_address = false;
+	musb->ackpend = MUSB_CSR0_P_SVDRXPKTRDY;
+	if (req->wLength == 0) {
+		if (req->bRequestType & USB_DIR_IN)
+			musb->ackpend |= MUSB_CSR0_TXPKTRDY;
+		musb->ep0_state = MUSB_EP0_STAGE_ACKWAIT;
+	} else if (req->bRequestType & USB_DIR_IN) {
+		musb->ep0_state = MUSB_EP0_STAGE_TX;
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDRXPKTRDY);
+		while ((musb_readw(regs, MUSB_CSR0)
+				& MUSB_CSR0_RXPKTRDY) != 0)
+			cpu_relax();
+		musb->ackpend = 0;
+	} else
+		musb->ep0_state = MUSB_EP0_STAGE_RX;
+}
+
+static int
+forward_to_driver(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	int retval;
+	if (!musb->gadget_driver)
+		return -EOPNOTSUPP;
+	spin_unlock(&musb->lock);
+	retval = musb->gadget_driver->setup(&musb->g, ctrlrequest);
+	spin_lock(&musb->lock);
+	return retval;
+}
+
+/*
+ * Handle peripheral ep0 interrupt
+ *
+ * Context: irq handler; we won't re-enter the driver that way.
+ */
+irqreturn_t musb_g_ep0_irq(struct musb *musb)
+{
+	u16		csr;
+	u16		len;
+	void __iomem	*mbase = musb->mregs;
+	void __iomem	*regs = musb->endpoints[0].regs;
+	irqreturn_t	retval = IRQ_NONE;
+
+	musb_ep_select(mbase, 0);	/* select ep0 */
+	csr = musb_readw(regs, MUSB_CSR0);
+	len = musb_readb(regs, MUSB_COUNT0);
+
+	DBG(4, "csr %04x, count %d, myaddr %d, ep0stage %s\n",
+			csr, len,
+			musb_readb(mbase, MUSB_FADDR),
+			decode_ep0stage(musb->ep0_state));
+
+	/* I sent a stall.. need to acknowledge it now.. */
+	if (csr & MUSB_CSR0_P_SENTSTALL) {
+		musb_writew(regs, MUSB_CSR0,
+				csr & ~MUSB_CSR0_P_SENTSTALL);
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		csr = musb_readw(regs, MUSB_CSR0);
+	}
+
+	/* request ended "early" */
+	if (csr & MUSB_CSR0_P_SETUPEND) {
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDSETUPEND);
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		csr = musb_readw(regs, MUSB_CSR0);
+		/* NOTE:  request may need completion */
+	}
+
+	/* docs from Mentor only describe tx, rx, and idle/setup states.
+	 * we need to handle nuances around status stages, and also the
+	 * case where status and setup stages come back-to-back ...
+	 */
+	switch (musb->ep0_state) {
+
+	case MUSB_EP0_STAGE_TX:
+		/* irq on clearing txpktrdy */
+		if ((csr & MUSB_CSR0_TXPKTRDY) == 0) {
+			ep0_txstate(musb);
+			retval = IRQ_HANDLED;
+		}
+		break;
+
+	case MUSB_EP0_STAGE_RX:
+		/* irq on set rxpktrdy */
+		if (csr & MUSB_CSR0_RXPKTRDY) {
+			ep0_rxstate(musb);
+			retval = IRQ_HANDLED;
+		}
+		break;
+
+	case MUSB_EP0_STAGE_STATUSIN:
+		/* end of sequence #2 (OUT/RX state) or #3 (no data) */
+
+		/* update address (if needed) only @ the end of the
+		 * status phase per usb spec, which also guarantees
+		 * we get 10 msec to receive this irq... until this
+		 * is done we won't see the next packet.
+		 */
+		if (musb->set_address) {
+			musb->set_address = false;
+			musb_writeb(mbase, MUSB_FADDR, musb->address);
+		}
+
+		/* enter test mode if needed (exit by reset) */
+		else if (musb->test_mode) {
+			DBG(1, "entering TESTMODE\n");
+
+			if (MUSB_TEST_PACKET == musb->test_mode_nr)
+				musb_load_testpacket(musb);
+
+			musb_writeb(mbase, MUSB_TESTMODE,
+					musb->test_mode_nr);
+		}
+		/* FALLTHROUGH */
+
+	case MUSB_EP0_STAGE_STATUSOUT:
+		/* end of sequence #1: write to host (TX state) */
+		{
+			struct usb_request	*req;
+
+			req = next_ep0_request(musb);
+			if (req)
+				musb_g_ep0_giveback(musb, req);
+		}
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		/* FALLTHROUGH */
+
+	case MUSB_EP0_STAGE_SETUP:
+		if (csr & MUSB_CSR0_RXPKTRDY) {
+			struct usb_ctrlrequest	setup;
+			int			handled = 0;
+
+			if (len != 8) {
+				ERR("SETUP packet len %d != 8 ?\n", len);
+				break;
+			}
+			musb_read_setup(musb, &setup);
+			retval = IRQ_HANDLED;
+
+			/* sometimes the RESET won't be reported */
+			if (unlikely(musb->g.speed == USB_SPEED_UNKNOWN)) {
+				u8	power;
+
+				printk(KERN_NOTICE "%s: peripheral reset "
+						"irq lost!\n",
+						musb_driver_name);
+				power = musb_readb(mbase, MUSB_POWER);
+				musb->g.speed = (power & MUSB_POWER_HSMODE)
+					? USB_SPEED_HIGH : USB_SPEED_FULL;
+
+			}
+
+			switch (musb->ep0_state) {
+
+			/* sequence #3 (no data stage), includes requests
+			 * we can't forward (notably SET_ADDRESS and the
+			 * device/endpoint feature set/clear operations)
+			 * plus SET_CONFIGURATION and others we must
+			 */
+			case MUSB_EP0_STAGE_ACKWAIT:
+				handled = service_zero_data_request(
+						musb, &setup);
+
+				/* status stage might be immediate */
+				if (handled > 0) {
+					musb->ackpend |= MUSB_CSR0_P_DATAEND;
+					musb->ep0_state =
+						MUSB_EP0_STAGE_STATUSIN;
+				}
+				break;
+
+			/* sequence #1 (IN to host), includes GET_STATUS
+			 * requests that we can't forward, GET_DESCRIPTOR
+			 * and others that we must
+			 */
+			case MUSB_EP0_STAGE_TX:
+				handled = service_in_request(musb, &setup);
+				if (handled > 0) {
+					musb->ackpend = MUSB_CSR0_TXPKTRDY
+						| MUSB_CSR0_P_DATAEND;
+					musb->ep0_state =
+						MUSB_EP0_STAGE_STATUSOUT;
+				}
+				break;
+
+			/* sequence #2 (OUT from host), always forward */
+			default:		/* MUSB_EP0_STAGE_RX */
+				break;
+			}
+
+			DBG(3, "handled %d, csr %04x, ep0stage %s\n",
+				handled, csr,
+				decode_ep0stage(musb->ep0_state));
+
+			/* unless we need to delegate this to the gadget
+			 * driver, we know how to wrap this up:  csr0 has
+			 * not yet been written.
+			 */
+			if (handled < 0)
+				goto stall;
+			else if (handled > 0)
+				goto finish;
+
+			handled = forward_to_driver(musb, &setup);
+			if (handled < 0) {
+				musb_ep_select(mbase, 0);
+stall:
+				DBG(3, "stall (%d)\n", handled);
+				musb->ackpend |= MUSB_CSR0_P_SENDSTALL;
+				musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+finish:
+				musb_writew(regs, MUSB_CSR0,
+						musb->ackpend);
+				musb->ackpend = 0;
+			}
+		}
+		break;
+
+	case MUSB_EP0_STAGE_ACKWAIT:
+		/* This should not happen. But happens with tusb6010 with
+		 * g_file_storage and high speed. Do nothing.
+		 */
+		retval = IRQ_HANDLED;
+		break;
+
+	default:
+		/* "can't happen" */
+		WARN_ON(1);
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SENDSTALL);
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		break;
+	}
+
+	return retval;
+}
+
+
+static int
+musb_g_ep0_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc)
+{
+	/* always enabled */
+	return -EINVAL;
+}
+
+static int musb_g_ep0_disable(struct usb_ep *e)
+{
+	/* always enabled */
+	return -EINVAL;
+}
+
+static int
+musb_g_ep0_queue(struct usb_ep *e, struct usb_request *r, gfp_t gfp_flags)
+{
+	struct musb_ep		*ep;
+	struct musb_request	*req;
+	struct musb		*musb;
+	int			status;
+	unsigned long		lockflags;
+	void __iomem		*regs;
+
+	if (!e || !r)
+		return -EINVAL;
+
+	ep = to_musb_ep(e);
+	musb = ep->musb;
+	regs = musb->control_ep->regs;
+
+	req = to_musb_request(r);
+	req->musb = musb;
+	req->request.actual = 0;
+	req->request.status = -EINPROGRESS;
+	req->tx = ep->is_in;
+
+	spin_lock_irqsave(&musb->lock, lockflags);
+
+	if (!list_empty(&ep->req_list)) {
+		status = -EBUSY;
+		goto cleanup;
+	}
+
+	switch (musb->ep0_state) {
+	case MUSB_EP0_STAGE_RX:		/* control-OUT data */
+	case MUSB_EP0_STAGE_TX:		/* control-IN data */
+	case MUSB_EP0_STAGE_ACKWAIT:	/* zero-length data */
+		status = 0;
+		break;
+	default:
+		DBG(1, "ep0 request queued in state %d\n",
+				musb->ep0_state);
+		status = -EINVAL;
+		goto cleanup;
+	}
+
+	/* add request to the list */
+	list_add_tail(&(req->request.list), &(ep->req_list));
+
+	DBG(3, "queue to %s (%s), length=%d\n",
+			ep->name, ep->is_in ? "IN/TX" : "OUT/RX",
+			req->request.length);
+
+	musb_ep_select(musb->mregs, 0);
+
+	/* sequence #1, IN ... start writing the data */
+	if (musb->ep0_state == MUSB_EP0_STAGE_TX)
+		ep0_txstate(musb);
+
+	/* sequence #3, no-data ... issue IN status */
+	else if (musb->ep0_state == MUSB_EP0_STAGE_ACKWAIT) {
+		if (req->request.length)
+			status = -EINVAL;
+		else {
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+			musb_writew(regs, MUSB_CSR0,
+					musb->ackpend | MUSB_CSR0_P_DATAEND);
+			musb->ackpend = 0;
+			musb_g_ep0_giveback(ep->musb, r);
+		}
+
+	/* else for sequence #2 (OUT), caller provides a buffer
+	 * before the next packet arrives.  deferred responses
+	 * (after SETUP is acked) are racey.
+	 */
+	} else if (musb->ackpend) {
+		musb_writew(regs, MUSB_CSR0, musb->ackpend);
+		musb->ackpend = 0;
+	}
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, lockflags);
+	return status;
+}
+
+static int musb_g_ep0_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	/* we just won't support this */
+	return -EINVAL;
+}
+
+static int musb_g_ep0_halt(struct usb_ep *e, int value)
+{
+	struct musb_ep		*ep;
+	struct musb		*musb;
+	void __iomem		*base, *regs;
+	unsigned long		flags;
+	int			status;
+	u16			csr;
+
+	if (!e || !value)
+		return -EINVAL;
+
+	ep = to_musb_ep(e);
+	musb = ep->musb;
+	base = musb->mregs;
+	regs = musb->control_ep->regs;
+	status = 0;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (!list_empty(&ep->req_list)) {
+		status = -EBUSY;
+		goto cleanup;
+	}
+
+	musb_ep_select(base, 0);
+	csr = musb->ackpend;
+
+	switch (musb->ep0_state) {
+
+	/* Stalls are usually issued after parsing SETUP packet, either
+	 * directly in irq context from setup() or else later.
+	 */
+	case MUSB_EP0_STAGE_TX:		/* control-IN data */
+	case MUSB_EP0_STAGE_ACKWAIT:	/* STALL for zero-length data */
+	case MUSB_EP0_STAGE_RX:		/* control-OUT data */
+		csr = musb_readw(regs, MUSB_CSR0);
+		/* FALLTHROUGH */
+
+	/* It's also OK to issue stalls during callbacks when a non-empty
+	 * DATA stage buffer has been read (or even written).
+	 */
+	case MUSB_EP0_STAGE_STATUSIN:	/* control-OUT status */
+	case MUSB_EP0_STAGE_STATUSOUT:	/* control-IN status */
+
+		csr |= MUSB_CSR0_P_SENDSTALL;
+		musb_writew(regs, MUSB_CSR0, csr);
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		musb->ackpend = 0;
+		break;
+	default:
+		DBG(1, "ep0 can't halt in state %d\n", musb->ep0_state);
+		status = -EINVAL;
+	}
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+const struct usb_ep_ops musb_g_ep0_ops = {
+	.enable		= musb_g_ep0_enable,
+	.disable	= musb_g_ep0_disable,
+	.alloc_request	= musb_alloc_request,
+	.free_request	= musb_free_request,
+	.queue		= musb_g_ep0_queue,
+	.dequeue	= musb_g_ep0_dequeue,
+	.set_halt	= musb_g_ep0_halt,
+};
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
new file mode 100644
index 000000000000..8b4be012669a
--- /dev/null
+++ b/drivers/usb/musb/musb_host.c
@@ -0,0 +1,2170 @@
+/*
+ * MUSB OTG driver host support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+
+#include "musb_core.h"
+#include "musb_host.h"
+
+
+/* MUSB HOST status 22-mar-2006
+ *
+ * - There's still lots of partial code duplication for fault paths, so
+ *   they aren't handled as consistently as they need to be.
+ *
+ * - PIO mostly behaved when last tested.
+ *     + including ep0, with all usbtest cases 9, 10
+ *     + usbtest 14 (ep0out) doesn't seem to run at all
+ *     + double buffered OUT/TX endpoints saw stalls(!) with certain usbtest
+ *       configurations, but otherwise double buffering passes basic tests.
+ *     + for 2.6.N, for N > ~10, needs API changes for hcd framework.
+ *
+ * - DMA (CPPI) ... partially behaves, not currently recommended
+ *     + about 1/15 the speed of typical EHCI implementations (PCI)
+ *     + RX, all too often reqpkt seems to misbehave after tx
+ *     + TX, no known issues (other than evident silicon issue)
+ *
+ * - DMA (Mentor/OMAP) ...has at least toggle update problems
+ *
+ * - Still no traffic scheduling code to make NAKing for bulk or control
+ *   transfers unable to starve other requests; or to make efficient use
+ *   of hardware with periodic transfers.  (Note that network drivers
+ *   commonly post bulk reads that stay pending for a long time; these
+ *   would make very visible trouble.)
+ *
+ * - Not tested with HNP, but some SRP paths seem to behave.
+ *
+ * NOTE 24-August-2006:
+ *
+ * - Bulk traffic finally uses both sides of hardware ep1, freeing up an
+ *   extra endpoint for periodic use enabling hub + keybd + mouse.  That
+ *   mostly works, except that with "usbnet" it's easy to trigger cases
+ *   with "ping" where RX loses.  (a) ping to davinci, even "ping -f",
+ *   fine; but (b) ping _from_ davinci, even "ping -c 1", ICMP RX loses
+ *   although ARP RX wins.  (That test was done with a full speed link.)
+ */
+
+
+/*
+ * NOTE on endpoint usage:
+ *
+ * CONTROL transfers all go through ep0.  BULK ones go through dedicated IN
+ * and OUT endpoints ... hardware is dedicated for those "async" queue(s).
+ *
+ * (Yes, bulk _could_ use more of the endpoints than that, and would even
+ * benefit from it ... one remote device may easily be NAKing while others
+ * need to perform transfers in that same direction.  The same thing could
+ * be done in software though, assuming dma cooperates.)
+ *
+ * INTERUPPT and ISOCHRONOUS transfers are scheduled to the other endpoints.
+ * So far that scheduling is both dumb and optimistic:  the endpoint will be
+ * "claimed" until its software queue is no longer refilled.  No multiplexing
+ * of transfers between endpoints, or anything clever.
+ */
+
+
+static void musb_ep_program(struct musb *musb, u8 epnum,
+			struct urb *urb, unsigned int nOut,
+			u8 *buf, u32 len);
+
+/*
+ * Clear TX fifo. Needed to avoid BABBLE errors.
+ */
+static inline void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
+{
+	void __iomem	*epio = ep->regs;
+	u16		csr;
+	int		retries = 1000;
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	while (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+		DBG(5, "Host TX FIFONOTEMPTY csr: %02x\n", csr);
+		csr |= MUSB_TXCSR_FLUSHFIFO;
+		musb_writew(epio, MUSB_TXCSR, csr);
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (retries-- < 1) {
+			ERR("Could not flush host TX fifo: csr: %04x\n", csr);
+			return;
+		}
+		mdelay(1);
+	}
+}
+
+/*
+ * Start transmit. Caller is responsible for locking shared resources.
+ * musb must be locked.
+ */
+static inline void musb_h_tx_start(struct musb_hw_ep *ep)
+{
+	u16	txcsr;
+
+	/* NOTE: no locks here; caller should lock and select EP */
+	if (ep->epnum) {
+		txcsr = musb_readw(ep->regs, MUSB_TXCSR);
+		txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
+		musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+	} else {
+		txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY;
+		musb_writew(ep->regs, MUSB_CSR0, txcsr);
+	}
+
+}
+
+static inline void cppi_host_txdma_start(struct musb_hw_ep *ep)
+{
+	u16	txcsr;
+
+	/* NOTE: no locks here; caller should lock and select EP */
+	txcsr = musb_readw(ep->regs, MUSB_TXCSR);
+	txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS;
+	musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+}
+
+/*
+ * Start the URB at the front of an endpoint's queue
+ * end must be claimed from the caller.
+ *
+ * Context: controller locked, irqs blocked
+ */
+static void
+musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
+{
+	u16			frame;
+	u32			len;
+	void			*buf;
+	void __iomem		*mbase =  musb->mregs;
+	struct urb		*urb = next_urb(qh);
+	struct musb_hw_ep	*hw_ep = qh->hw_ep;
+	unsigned		pipe = urb->pipe;
+	u8			address = usb_pipedevice(pipe);
+	int			epnum = hw_ep->epnum;
+
+	/* initialize software qh state */
+	qh->offset = 0;
+	qh->segsize = 0;
+
+	/* gather right source of data */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* control transfers always start with SETUP */
+		is_in = 0;
+		hw_ep->out_qh = qh;
+		musb->ep0_stage = MUSB_EP0_START;
+		buf = urb->setup_packet;
+		len = 8;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		qh->iso_idx = 0;
+		qh->frame = 0;
+		buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset;
+		len = urb->iso_frame_desc[0].length;
+		break;
+	default:		/* bulk, interrupt */
+		buf = urb->transfer_buffer;
+		len = urb->transfer_buffer_length;
+	}
+
+	DBG(4, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n",
+			qh, urb, address, qh->epnum,
+			is_in ? "in" : "out",
+			({char *s; switch (qh->type) {
+			case USB_ENDPOINT_XFER_CONTROL:	s = ""; break;
+			case USB_ENDPOINT_XFER_BULK:	s = "-bulk"; break;
+			case USB_ENDPOINT_XFER_ISOC:	s = "-iso"; break;
+			default:			s = "-intr"; break;
+			}; s; }),
+			epnum, buf, len);
+
+	/* Configure endpoint */
+	if (is_in || hw_ep->is_shared_fifo)
+		hw_ep->in_qh = qh;
+	else
+		hw_ep->out_qh = qh;
+	musb_ep_program(musb, epnum, urb, !is_in, buf, len);
+
+	/* transmit may have more work: start it when it is time */
+	if (is_in)
+		return;
+
+	/* determine if the time is right for a periodic transfer */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_ISOC:
+	case USB_ENDPOINT_XFER_INT:
+		DBG(3, "check whether there's still time for periodic Tx\n");
+		qh->iso_idx = 0;
+		frame = musb_readw(mbase, MUSB_FRAME);
+		/* FIXME this doesn't implement that scheduling policy ...
+		 * or handle framecounter wrapping
+		 */
+		if ((urb->transfer_flags & URB_ISO_ASAP)
+				|| (frame >= urb->start_frame)) {
+			/* REVISIT the SOF irq handler shouldn't duplicate
+			 * this code; and we don't init urb->start_frame...
+			 */
+			qh->frame = 0;
+			goto start;
+		} else {
+			qh->frame = urb->start_frame;
+			/* enable SOF interrupt so we can count down */
+			DBG(1, "SOF for %d\n", epnum);
+#if 1 /* ifndef	CONFIG_ARCH_DAVINCI */
+			musb_writeb(mbase, MUSB_INTRUSBE, 0xff);
+#endif
+		}
+		break;
+	default:
+start:
+		DBG(4, "Start TX%d %s\n", epnum,
+			hw_ep->tx_channel ? "dma" : "pio");
+
+		if (!hw_ep->tx_channel)
+			musb_h_tx_start(hw_ep);
+		else if (is_cppi_enabled() || tusb_dma_omap())
+			cppi_host_txdma_start(hw_ep);
+	}
+}
+
+/* caller owns controller lock, irqs are blocked */
+static void
+__musb_giveback(struct musb *musb, struct urb *urb, int status)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	DBG(({ int level; switch (urb->status) {
+				case 0:
+					level = 4;
+					break;
+				/* common/boring faults */
+				case -EREMOTEIO:
+				case -ESHUTDOWN:
+				case -ECONNRESET:
+				case -EPIPE:
+					level = 3;
+					break;
+				default:
+					level = 2;
+					break;
+				}; level; }),
+			"complete %p (%d), dev%d ep%d%s, %d/%d\n",
+			urb, urb->status,
+			usb_pipedevice(urb->pipe),
+			usb_pipeendpoint(urb->pipe),
+			usb_pipein(urb->pipe) ? "in" : "out",
+			urb->actual_length, urb->transfer_buffer_length
+			);
+
+	spin_unlock(&musb->lock);
+	usb_hcd_giveback_urb(musb_to_hcd(musb), urb, status);
+	spin_lock(&musb->lock);
+}
+
+/* for bulk/interrupt endpoints only */
+static inline void
+musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb)
+{
+	struct usb_device	*udev = urb->dev;
+	u16			csr;
+	void __iomem		*epio = ep->regs;
+	struct musb_qh		*qh;
+
+	/* FIXME:  the current Mentor DMA code seems to have
+	 * problems getting toggle correct.
+	 */
+
+	if (is_in || ep->is_shared_fifo)
+		qh = ep->in_qh;
+	else
+		qh = ep->out_qh;
+
+	if (!is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		usb_settoggle(udev, qh->epnum, 1,
+			(csr & MUSB_TXCSR_H_DATATOGGLE)
+				? 1 : 0);
+	} else {
+		csr = musb_readw(epio, MUSB_RXCSR);
+		usb_settoggle(udev, qh->epnum, 0,
+			(csr & MUSB_RXCSR_H_DATATOGGLE)
+				? 1 : 0);
+	}
+}
+
+/* caller owns controller lock, irqs are blocked */
+static struct musb_qh *
+musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
+{
+	int			is_in;
+	struct musb_hw_ep	*ep = qh->hw_ep;
+	struct musb		*musb = ep->musb;
+	int			ready = qh->is_ready;
+
+	if (ep->is_shared_fifo)
+		is_in = 1;
+	else
+		is_in = usb_pipein(urb->pipe);
+
+	/* save toggle eagerly, for paranoia */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_INT:
+		musb_save_toggle(ep, is_in, urb);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (status == 0 && urb->error_count)
+			status = -EXDEV;
+		break;
+	}
+
+	usb_hcd_unlink_urb_from_ep(musb_to_hcd(musb), urb);
+
+	qh->is_ready = 0;
+	__musb_giveback(musb, urb, status);
+	qh->is_ready = ready;
+
+	/* reclaim resources (and bandwidth) ASAP; deschedule it, and
+	 * invalidate qh as soon as list_empty(&hep->urb_list)
+	 */
+	if (list_empty(&qh->hep->urb_list)) {
+		struct list_head	*head;
+
+		if (is_in)
+			ep->rx_reinit = 1;
+		else
+			ep->tx_reinit = 1;
+
+		/* clobber old pointers to this qh */
+		if (is_in || ep->is_shared_fifo)
+			ep->in_qh = NULL;
+		else
+			ep->out_qh = NULL;
+		qh->hep->hcpriv = NULL;
+
+		switch (qh->type) {
+
+		case USB_ENDPOINT_XFER_ISOC:
+		case USB_ENDPOINT_XFER_INT:
+			/* this is where periodic bandwidth should be
+			 * de-allocated if it's tracked and allocated;
+			 * and where we'd update the schedule tree...
+			 */
+			musb->periodic[ep->epnum] = NULL;
+			kfree(qh);
+			qh = NULL;
+			break;
+
+		case USB_ENDPOINT_XFER_CONTROL:
+		case USB_ENDPOINT_XFER_BULK:
+			/* fifo policy for these lists, except that NAKing
+			 * should rotate a qh to the end (for fairness).
+			 */
+			head = qh->ring.prev;
+			list_del(&qh->ring);
+			kfree(qh);
+			qh = first_qh(head);
+			break;
+		}
+	}
+	return qh;
+}
+
+/*
+ * Advance this hardware endpoint's queue, completing the specified urb and
+ * advancing to either the next urb queued to that qh, or else invalidating
+ * that qh and advancing to the next qh scheduled after the current one.
+ *
+ * Context: caller owns controller lock, irqs are blocked
+ */
+static void
+musb_advance_schedule(struct musb *musb, struct urb *urb,
+		struct musb_hw_ep *hw_ep, int is_in)
+{
+	struct musb_qh	*qh;
+
+	if (is_in || hw_ep->is_shared_fifo)
+		qh = hw_ep->in_qh;
+	else
+		qh = hw_ep->out_qh;
+
+	if (urb->status == -EINPROGRESS)
+		qh = musb_giveback(qh, urb, 0);
+	else
+		qh = musb_giveback(qh, urb, urb->status);
+
+	if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) {
+		DBG(4, "... next ep%d %cX urb %p\n",
+				hw_ep->epnum, is_in ? 'R' : 'T',
+				next_urb(qh));
+		musb_start_urb(musb, is_in, qh);
+	}
+}
+
+static inline u16 musb_h_flush_rxfifo(struct musb_hw_ep *hw_ep, u16 csr)
+{
+	/* we don't want fifo to fill itself again;
+	 * ignore dma (various models),
+	 * leave toggle alone (may not have been saved yet)
+	 */
+	csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_RXPKTRDY;
+	csr &= ~(MUSB_RXCSR_H_REQPKT
+		| MUSB_RXCSR_H_AUTOREQ
+		| MUSB_RXCSR_AUTOCLEAR);
+
+	/* write 2x to allow double buffering */
+	musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+	musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+
+	/* flush writebuffer */
+	return musb_readw(hw_ep->regs, MUSB_RXCSR);
+}
+
+/*
+ * PIO RX for a packet (or part of it).
+ */
+static bool
+musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err)
+{
+	u16			rx_count;
+	u8			*buf;
+	u16			csr;
+	bool			done = false;
+	u32			length;
+	int			do_flush = 0;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	int			pipe = urb->pipe;
+	void			*buffer = urb->transfer_buffer;
+
+	/* musb_ep_select(mbase, epnum); */
+	rx_count = musb_readw(epio, MUSB_RXCOUNT);
+	DBG(3, "RX%d count %d, buffer %p len %d/%d\n", epnum, rx_count,
+			urb->transfer_buffer, qh->offset,
+			urb->transfer_buffer_length);
+
+	/* unload FIFO */
+	if (usb_pipeisoc(pipe)) {
+		int					status = 0;
+		struct usb_iso_packet_descriptor	*d;
+
+		if (iso_err) {
+			status = -EILSEQ;
+			urb->error_count++;
+		}
+
+		d = urb->iso_frame_desc + qh->iso_idx;
+		buf = buffer + d->offset;
+		length = d->length;
+		if (rx_count > length) {
+			if (status == 0) {
+				status = -EOVERFLOW;
+				urb->error_count++;
+			}
+			DBG(2, "** OVERFLOW %d into %d\n", rx_count, length);
+			do_flush = 1;
+		} else
+			length = rx_count;
+		urb->actual_length += length;
+		d->actual_length = length;
+
+		d->status = status;
+
+		/* see if we are done */
+		done = (++qh->iso_idx >= urb->number_of_packets);
+	} else {
+		/* non-isoch */
+		buf = buffer + qh->offset;
+		length = urb->transfer_buffer_length - qh->offset;
+		if (rx_count > length) {
+			if (urb->status == -EINPROGRESS)
+				urb->status = -EOVERFLOW;
+			DBG(2, "** OVERFLOW %d into %d\n", rx_count, length);
+			do_flush = 1;
+		} else
+			length = rx_count;
+		urb->actual_length += length;
+		qh->offset += length;
+
+		/* see if we are done */
+		done = (urb->actual_length == urb->transfer_buffer_length)
+			|| (rx_count < qh->maxpacket)
+			|| (urb->status != -EINPROGRESS);
+		if (done
+				&& (urb->status == -EINPROGRESS)
+				&& (urb->transfer_flags & URB_SHORT_NOT_OK)
+				&& (urb->actual_length
+					< urb->transfer_buffer_length))
+			urb->status = -EREMOTEIO;
+	}
+
+	musb_read_fifo(hw_ep, length, buf);
+
+	csr = musb_readw(epio, MUSB_RXCSR);
+	csr |= MUSB_RXCSR_H_WZC_BITS;
+	if (unlikely(do_flush))
+		musb_h_flush_rxfifo(hw_ep, csr);
+	else {
+		/* REVISIT this assumes AUTOCLEAR is never set */
+		csr &= ~(MUSB_RXCSR_RXPKTRDY | MUSB_RXCSR_H_REQPKT);
+		if (!done)
+			csr |= MUSB_RXCSR_H_REQPKT;
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+	return done;
+}
+
+/* we don't always need to reinit a given side of an endpoint...
+ * when we do, use tx/rx reinit routine and then construct a new CSR
+ * to address data toggle, NYET, and DMA or PIO.
+ *
+ * it's possible that driver bugs (especially for DMA) or aborting a
+ * transfer might have left the endpoint busier than it should be.
+ * the busy/not-empty tests are basically paranoia.
+ */
+static void
+musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
+{
+	u16	csr;
+
+	/* NOTE:  we know the "rx" fifo reinit never triggers for ep0.
+	 * That always uses tx_reinit since ep0 repurposes TX register
+	 * offsets; the initial SETUP packet is also a kind of OUT.
+	 */
+
+	/* if programmed for Tx, put it in RX mode */
+	if (ep->is_shared_fifo) {
+		csr = musb_readw(ep->regs, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_MODE) {
+			musb_h_tx_flush_fifo(ep);
+			musb_writew(ep->regs, MUSB_TXCSR,
+					MUSB_TXCSR_FRCDATATOG);
+		}
+		/* clear mode (and everything else) to enable Rx */
+		musb_writew(ep->regs, MUSB_TXCSR, 0);
+
+	/* scrub all previous state, clearing toggle */
+	} else {
+		csr = musb_readw(ep->regs, MUSB_RXCSR);
+		if (csr & MUSB_RXCSR_RXPKTRDY)
+			WARNING("rx%d, packet/%d ready?\n", ep->epnum,
+				musb_readw(ep->regs, MUSB_RXCOUNT));
+
+		musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
+	}
+
+	/* target addr and (for multipoint) hub addr/port */
+	if (musb->is_multipoint) {
+		musb_writeb(ep->target_regs, MUSB_RXFUNCADDR,
+			qh->addr_reg);
+		musb_writeb(ep->target_regs, MUSB_RXHUBADDR,
+			qh->h_addr_reg);
+		musb_writeb(ep->target_regs, MUSB_RXHUBPORT,
+			qh->h_port_reg);
+	} else
+		musb_writeb(musb->mregs, MUSB_FADDR, qh->addr_reg);
+
+	/* protocol/endpoint, interval/NAKlimit, i/o size */
+	musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg);
+	musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg);
+	/* NOTE: bulk combining rewrites high bits of maxpacket */
+	musb_writew(ep->regs, MUSB_RXMAXP, qh->maxpacket);
+
+	ep->rx_reinit = 0;
+}
+
+
+/*
+ * Program an HDRC endpoint as per the given URB
+ * Context: irqs blocked, controller lock held
+ */
+static void musb_ep_program(struct musb *musb, u8 epnum,
+			struct urb *urb, unsigned int is_out,
+			u8 *buf, u32 len)
+{
+	struct dma_controller	*dma_controller;
+	struct dma_channel	*dma_channel;
+	u8			dma_ok;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh;
+	u16			packet_sz;
+
+	if (!is_out || hw_ep->is_shared_fifo)
+		qh = hw_ep->in_qh;
+	else
+		qh = hw_ep->out_qh;
+
+	packet_sz = qh->maxpacket;
+
+	DBG(3, "%s hw%d urb %p spd%d dev%d ep%d%s "
+				"h_addr%02x h_port%02x bytes %d\n",
+			is_out ? "-->" : "<--",
+			epnum, urb, urb->dev->speed,
+			qh->addr_reg, qh->epnum, is_out ? "out" : "in",
+			qh->h_addr_reg, qh->h_port_reg,
+			len);
+
+	musb_ep_select(mbase, epnum);
+
+	/* candidate for DMA? */
+	dma_controller = musb->dma_controller;
+	if (is_dma_capable() && epnum && dma_controller) {
+		dma_channel = is_out ? hw_ep->tx_channel : hw_ep->rx_channel;
+		if (!dma_channel) {
+			dma_channel = dma_controller->channel_alloc(
+					dma_controller, hw_ep, is_out);
+			if (is_out)
+				hw_ep->tx_channel = dma_channel;
+			else
+				hw_ep->rx_channel = dma_channel;
+		}
+	} else
+		dma_channel = NULL;
+
+	/* make sure we clear DMAEnab, autoSet bits from previous run */
+
+	/* OUT/transmit/EP0 or IN/receive? */
+	if (is_out) {
+		u16	csr;
+		u16	int_txe;
+		u16	load_count;
+
+		csr = musb_readw(epio, MUSB_TXCSR);
+
+		/* disable interrupt in case we flush */
+		int_txe = musb_readw(mbase, MUSB_INTRTXE);
+		musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
+
+		/* general endpoint setup */
+		if (epnum) {
+			/* ASSERT:  TXCSR_DMAENAB was already cleared */
+
+			/* flush all old state, set default */
+			musb_h_tx_flush_fifo(hw_ep);
+			csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
+					| MUSB_TXCSR_DMAMODE
+					| MUSB_TXCSR_FRCDATATOG
+					| MUSB_TXCSR_H_RXSTALL
+					| MUSB_TXCSR_H_ERROR
+					| MUSB_TXCSR_TXPKTRDY
+					);
+			csr |= MUSB_TXCSR_MODE;
+
+			if (usb_gettoggle(urb->dev,
+					qh->epnum, 1))
+				csr |= MUSB_TXCSR_H_WR_DATATOGGLE
+					| MUSB_TXCSR_H_DATATOGGLE;
+			else
+				csr |= MUSB_TXCSR_CLRDATATOG;
+
+			/* twice in case of double packet buffering */
+			musb_writew(epio, MUSB_TXCSR, csr);
+			/* REVISIT may need to clear FLUSHFIFO ... */
+			musb_writew(epio, MUSB_TXCSR, csr);
+			csr = musb_readw(epio, MUSB_TXCSR);
+		} else {
+			/* endpoint 0: just flush */
+			musb_writew(epio, MUSB_CSR0,
+				csr | MUSB_CSR0_FLUSHFIFO);
+			musb_writew(epio, MUSB_CSR0,
+				csr | MUSB_CSR0_FLUSHFIFO);
+		}
+
+		/* target addr and (for multipoint) hub addr/port */
+		if (musb->is_multipoint) {
+			musb_writeb(mbase,
+				MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR),
+				qh->addr_reg);
+			musb_writeb(mbase,
+				MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR),
+				qh->h_addr_reg);
+			musb_writeb(mbase,
+				MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT),
+				qh->h_port_reg);
+/* FIXME if !epnum, do the same for RX ... */
+		} else
+			musb_writeb(mbase, MUSB_FADDR, qh->addr_reg);
+
+		/* protocol/endpoint/interval/NAKlimit */
+		if (epnum) {
+			musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
+			if (can_bulk_split(musb, qh->type))
+				musb_writew(epio, MUSB_TXMAXP,
+					packet_sz
+					| ((hw_ep->max_packet_sz_tx /
+						packet_sz) - 1) << 11);
+			else
+				musb_writew(epio, MUSB_TXMAXP,
+					packet_sz);
+			musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg);
+		} else {
+			musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg);
+			if (musb->is_multipoint)
+				musb_writeb(epio, MUSB_TYPE0,
+						qh->type_reg);
+		}
+
+		if (can_bulk_split(musb, qh->type))
+			load_count = min((u32) hw_ep->max_packet_sz_tx,
+						len);
+		else
+			load_count = min((u32) packet_sz, len);
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+		if (dma_channel) {
+
+			/* clear previous state */
+			csr = musb_readw(epio, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_AUTOSET
+				| MUSB_TXCSR_DMAMODE
+				| MUSB_TXCSR_DMAENAB);
+			csr |= MUSB_TXCSR_MODE;
+			musb_writew(epio, MUSB_TXCSR,
+				csr | MUSB_TXCSR_MODE);
+
+			qh->segsize = min(len, dma_channel->max_len);
+
+			if (qh->segsize <= packet_sz)
+				dma_channel->desired_mode = 0;
+			else
+				dma_channel->desired_mode = 1;
+
+
+			if (dma_channel->desired_mode == 0) {
+				csr &= ~(MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAMODE);
+				csr |= (MUSB_TXCSR_DMAENAB);
+					/* against programming guide */
+			} else
+				csr |= (MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAENAB
+					| MUSB_TXCSR_DMAMODE);
+
+			musb_writew(epio, MUSB_TXCSR, csr);
+
+			dma_ok = dma_controller->channel_program(
+					dma_channel, packet_sz,
+					dma_channel->desired_mode,
+					urb->transfer_dma,
+					qh->segsize);
+			if (dma_ok) {
+				load_count = 0;
+			} else {
+				dma_controller->channel_release(dma_channel);
+				if (is_out)
+					hw_ep->tx_channel = NULL;
+				else
+					hw_ep->rx_channel = NULL;
+				dma_channel = NULL;
+			}
+		}
+#endif
+
+		/* candidate for DMA */
+		if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
+
+			/* program endpoint CSRs first, then setup DMA.
+			 * assume CPPI setup succeeds.
+			 * defer enabling dma.
+			 */
+			csr = musb_readw(epio, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAMODE
+					| MUSB_TXCSR_DMAENAB);
+			csr |= MUSB_TXCSR_MODE;
+			musb_writew(epio, MUSB_TXCSR,
+				csr | MUSB_TXCSR_MODE);
+
+			dma_channel->actual_len = 0L;
+			qh->segsize = len;
+
+			/* TX uses "rndis" mode automatically, but needs help
+			 * to identify the zero-length-final-packet case.
+			 */
+			dma_ok = dma_controller->channel_program(
+					dma_channel, packet_sz,
+					(urb->transfer_flags
+							& URB_ZERO_PACKET)
+						== URB_ZERO_PACKET,
+					urb->transfer_dma,
+					qh->segsize);
+			if (dma_ok) {
+				load_count = 0;
+			} else {
+				dma_controller->channel_release(dma_channel);
+				hw_ep->tx_channel = NULL;
+				dma_channel = NULL;
+
+				/* REVISIT there's an error path here that
+				 * needs handling:  can't do dma, but
+				 * there's no pio buffer address...
+				 */
+			}
+		}
+
+		if (load_count) {
+			/* ASSERT:  TXCSR_DMAENAB was already cleared */
+
+			/* PIO to load FIFO */
+			qh->segsize = load_count;
+			musb_write_fifo(hw_ep, load_count, buf);
+			csr = musb_readw(epio, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_DMAENAB
+				| MUSB_TXCSR_DMAMODE
+				| MUSB_TXCSR_AUTOSET);
+			/* write CSR */
+			csr |= MUSB_TXCSR_MODE;
+
+			if (epnum)
+				musb_writew(epio, MUSB_TXCSR, csr);
+		}
+
+		/* re-enable interrupt */
+		musb_writew(mbase, MUSB_INTRTXE, int_txe);
+
+	/* IN/receive */
+	} else {
+		u16	csr;
+
+		if (hw_ep->rx_reinit) {
+			musb_rx_reinit(musb, qh, hw_ep);
+
+			/* init new state: toggle and NYET, maybe DMA later */
+			if (usb_gettoggle(urb->dev, qh->epnum, 0))
+				csr = MUSB_RXCSR_H_WR_DATATOGGLE
+					| MUSB_RXCSR_H_DATATOGGLE;
+			else
+				csr = 0;
+			if (qh->type == USB_ENDPOINT_XFER_INT)
+				csr |= MUSB_RXCSR_DISNYET;
+
+		} else {
+			csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+
+			if (csr & (MUSB_RXCSR_RXPKTRDY
+					| MUSB_RXCSR_DMAENAB
+					| MUSB_RXCSR_H_REQPKT))
+				ERR("broken !rx_reinit, ep%d csr %04x\n",
+						hw_ep->epnum, csr);
+
+			/* scrub any stale state, leaving toggle alone */
+			csr &= MUSB_RXCSR_DISNYET;
+		}
+
+		/* kick things off */
+
+		if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
+			/* candidate for DMA */
+			if (dma_channel) {
+				dma_channel->actual_len = 0L;
+				qh->segsize = len;
+
+				/* AUTOREQ is in a DMA register */
+				musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+				csr = musb_readw(hw_ep->regs,
+						MUSB_RXCSR);
+
+				/* unless caller treats short rx transfers as
+				 * errors, we dare not queue multiple transfers.
+				 */
+				dma_ok = dma_controller->channel_program(
+						dma_channel, packet_sz,
+						!(urb->transfer_flags
+							& URB_SHORT_NOT_OK),
+						urb->transfer_dma,
+						qh->segsize);
+				if (!dma_ok) {
+					dma_controller->channel_release(
+							dma_channel);
+					hw_ep->rx_channel = NULL;
+					dma_channel = NULL;
+				} else
+					csr |= MUSB_RXCSR_DMAENAB;
+			}
+		}
+
+		csr |= MUSB_RXCSR_H_REQPKT;
+		DBG(7, "RXCSR%d := %04x\n", epnum, csr);
+		musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+		csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+	}
+}
+
+
+/*
+ * Service the default endpoint (ep0) as host.
+ * Return true until it's time to start the status stage.
+ */
+static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
+{
+	bool			 more = false;
+	u8			*fifo_dest = NULL;
+	u16			fifo_count = 0;
+	struct musb_hw_ep	*hw_ep = musb->control_ep;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	struct usb_ctrlrequest	*request;
+
+	switch (musb->ep0_stage) {
+	case MUSB_EP0_IN:
+		fifo_dest = urb->transfer_buffer + urb->actual_length;
+		fifo_count = min(len, ((u16) (urb->transfer_buffer_length
+					- urb->actual_length)));
+		if (fifo_count < len)
+			urb->status = -EOVERFLOW;
+
+		musb_read_fifo(hw_ep, fifo_count, fifo_dest);
+
+		urb->actual_length += fifo_count;
+		if (len < qh->maxpacket) {
+			/* always terminate on short read; it's
+			 * rarely reported as an error.
+			 */
+		} else if (urb->actual_length <
+				urb->transfer_buffer_length)
+			more = true;
+		break;
+	case MUSB_EP0_START:
+		request = (struct usb_ctrlrequest *) urb->setup_packet;
+
+		if (!request->wLength) {
+			DBG(4, "start no-DATA\n");
+			break;
+		} else if (request->bRequestType & USB_DIR_IN) {
+			DBG(4, "start IN-DATA\n");
+			musb->ep0_stage = MUSB_EP0_IN;
+			more = true;
+			break;
+		} else {
+			DBG(4, "start OUT-DATA\n");
+			musb->ep0_stage = MUSB_EP0_OUT;
+			more = true;
+		}
+		/* FALLTHROUGH */
+	case MUSB_EP0_OUT:
+		fifo_count = min(qh->maxpacket, ((u16)
+				(urb->transfer_buffer_length
+				- urb->actual_length)));
+
+		if (fifo_count) {
+			fifo_dest = (u8 *) (urb->transfer_buffer
+					+ urb->actual_length);
+			DBG(3, "Sending %d bytes to %p\n",
+					fifo_count, fifo_dest);
+			musb_write_fifo(hw_ep, fifo_count, fifo_dest);
+
+			urb->actual_length += fifo_count;
+			more = true;
+		}
+		break;
+	default:
+		ERR("bogus ep0 stage %d\n", musb->ep0_stage);
+		break;
+	}
+
+	return more;
+}
+
+/*
+ * Handle default endpoint interrupt as host. Only called in IRQ time
+ * from the LinuxIsr() interrupt service routine.
+ *
+ * called with controller irqlocked
+ */
+irqreturn_t musb_h_ep0_irq(struct musb *musb)
+{
+	struct urb		*urb;
+	u16			csr, len;
+	int			status = 0;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_hw_ep	*hw_ep = musb->control_ep;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	bool			complete = false;
+	irqreturn_t		retval = IRQ_NONE;
+
+	/* ep0 only has one queue, "in" */
+	urb = next_urb(qh);
+
+	musb_ep_select(mbase, 0);
+	csr = musb_readw(epio, MUSB_CSR0);
+	len = (csr & MUSB_CSR0_RXPKTRDY)
+			? musb_readb(epio, MUSB_COUNT0)
+			: 0;
+
+	DBG(4, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d\n",
+		csr, qh, len, urb, musb->ep0_stage);
+
+	/* if we just did status stage, we are done */
+	if (MUSB_EP0_STATUS == musb->ep0_stage) {
+		retval = IRQ_HANDLED;
+		complete = true;
+	}
+
+	/* prepare status */
+	if (csr & MUSB_CSR0_H_RXSTALL) {
+		DBG(6, "STALLING ENDPOINT\n");
+		status = -EPIPE;
+
+	} else if (csr & MUSB_CSR0_H_ERROR) {
+		DBG(2, "no response, csr0 %04x\n", csr);
+		status = -EPROTO;
+
+	} else if (csr & MUSB_CSR0_H_NAKTIMEOUT) {
+		DBG(2, "control NAK timeout\n");
+
+		/* NOTE:  this code path would be a good place to PAUSE a
+		 * control transfer, if another one is queued, so that
+		 * ep0 is more likely to stay busy.
+		 *
+		 * if (qh->ring.next != &musb->control), then
+		 * we have a candidate... NAKing is *NOT* an error
+		 */
+		musb_writew(epio, MUSB_CSR0, 0);
+		retval = IRQ_HANDLED;
+	}
+
+	if (status) {
+		DBG(6, "aborting\n");
+		retval = IRQ_HANDLED;
+		if (urb)
+			urb->status = status;
+		complete = true;
+
+		/* use the proper sequence to abort the transfer */
+		if (csr & MUSB_CSR0_H_REQPKT) {
+			csr &= ~MUSB_CSR0_H_REQPKT;
+			musb_writew(epio, MUSB_CSR0, csr);
+			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
+			musb_writew(epio, MUSB_CSR0, csr);
+		} else {
+			csr |= MUSB_CSR0_FLUSHFIFO;
+			musb_writew(epio, MUSB_CSR0, csr);
+			musb_writew(epio, MUSB_CSR0, csr);
+			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
+			musb_writew(epio, MUSB_CSR0, csr);
+		}
+
+		musb_writeb(epio, MUSB_NAKLIMIT0, 0);
+
+		/* clear it */
+		musb_writew(epio, MUSB_CSR0, 0);
+	}
+
+	if (unlikely(!urb)) {
+		/* stop endpoint since we have no place for its data, this
+		 * SHOULD NEVER HAPPEN! */
+		ERR("no URB for end 0\n");
+
+		musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
+		musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
+		musb_writew(epio, MUSB_CSR0, 0);
+
+		goto done;
+	}
+
+	if (!complete) {
+		/* call common logic and prepare response */
+		if (musb_h_ep0_continue(musb, len, urb)) {
+			/* more packets required */
+			csr = (MUSB_EP0_IN == musb->ep0_stage)
+				?  MUSB_CSR0_H_REQPKT : MUSB_CSR0_TXPKTRDY;
+		} else {
+			/* data transfer complete; perform status phase */
+			if (usb_pipeout(urb->pipe)
+					|| !urb->transfer_buffer_length)
+				csr = MUSB_CSR0_H_STATUSPKT
+					| MUSB_CSR0_H_REQPKT;
+			else
+				csr = MUSB_CSR0_H_STATUSPKT
+					| MUSB_CSR0_TXPKTRDY;
+
+			/* flag status stage */
+			musb->ep0_stage = MUSB_EP0_STATUS;
+
+			DBG(5, "ep0 STATUS, csr %04x\n", csr);
+
+		}
+		musb_writew(epio, MUSB_CSR0, csr);
+		retval = IRQ_HANDLED;
+	} else
+		musb->ep0_stage = MUSB_EP0_IDLE;
+
+	/* call completion handler if done */
+	if (complete)
+		musb_advance_schedule(musb, urb, hw_ep, 1);
+done:
+	return retval;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Host side TX (OUT) using Mentor DMA works as follows:
+	submit_urb ->
+		- if queue was empty, Program Endpoint
+		- ... which starts DMA to fifo in mode 1 or 0
+
+	DMA Isr (transfer complete) -> TxAvail()
+		- Stop DMA (~DmaEnab)	(<--- Alert ... currently happens
+					only in musb_cleanup_urb)
+		- TxPktRdy has to be set in mode 0 or for
+			short packets in mode 1.
+*/
+
+#endif
+
+/* Service a Tx-Available or dma completion irq for the endpoint */
+void musb_host_tx(struct musb *musb, u8 epnum)
+{
+	int			pipe;
+	bool			done = false;
+	u16			tx_csr;
+	size_t			wLength = 0;
+	u8			*buf = NULL;
+	struct urb		*urb;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->out_qh;
+	u32			status = 0;
+	void __iomem		*mbase = musb->mregs;
+	struct dma_channel	*dma;
+
+	urb = next_urb(qh);
+
+	musb_ep_select(mbase, epnum);
+	tx_csr = musb_readw(epio, MUSB_TXCSR);
+
+	/* with CPPI, DMA sometimes triggers "extra" irqs */
+	if (!urb) {
+		DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
+		goto finish;
+	}
+
+	pipe = urb->pipe;
+	dma = is_dma_capable() ? hw_ep->tx_channel : NULL;
+	DBG(4, "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
+			dma ? ", dma" : "");
+
+	/* check for errors */
+	if (tx_csr & MUSB_TXCSR_H_RXSTALL) {
+		/* dma was disabled, fifo flushed */
+		DBG(3, "TX end %d stall\n", epnum);
+
+		/* stall; record URB status */
+		status = -EPIPE;
+
+	} else if (tx_csr & MUSB_TXCSR_H_ERROR) {
+		/* (NON-ISO) dma was disabled, fifo flushed */
+		DBG(3, "TX 3strikes on ep=%d\n", epnum);
+
+		status = -ETIMEDOUT;
+
+	} else if (tx_csr & MUSB_TXCSR_H_NAKTIMEOUT) {
+		DBG(6, "TX end=%d device not responding\n", epnum);
+
+		/* NOTE:  this code path would be a good place to PAUSE a
+		 * transfer, if there's some other (nonperiodic) tx urb
+		 * that could use this fifo.  (dma complicates it...)
+		 *
+		 * if (bulk && qh->ring.next != &musb->out_bulk), then
+		 * we have a candidate... NAKing is *NOT* an error
+		 */
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_TXCSR,
+				MUSB_TXCSR_H_WZC_BITS
+				| MUSB_TXCSR_TXPKTRDY);
+		goto finish;
+	}
+
+	if (status) {
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+		}
+
+		/* do the proper sequence to abort the transfer in the
+		 * usb core; the dma engine should already be stopped.
+		 */
+		musb_h_tx_flush_fifo(hw_ep);
+		tx_csr &= ~(MUSB_TXCSR_AUTOSET
+				| MUSB_TXCSR_DMAENAB
+				| MUSB_TXCSR_H_ERROR
+				| MUSB_TXCSR_H_RXSTALL
+				| MUSB_TXCSR_H_NAKTIMEOUT
+				);
+
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_TXCSR, tx_csr);
+		/* REVISIT may need to clear FLUSHFIFO ... */
+		musb_writew(epio, MUSB_TXCSR, tx_csr);
+		musb_writeb(epio, MUSB_TXINTERVAL, 0);
+
+		done = true;
+	}
+
+	/* second cppi case */
+	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+		DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
+		goto finish;
+
+	}
+
+	/* REVISIT this looks wrong... */
+	if (!status || dma || usb_pipeisoc(pipe)) {
+		if (dma)
+			wLength = dma->actual_len;
+		else
+			wLength = qh->segsize;
+		qh->offset += wLength;
+
+		if (usb_pipeisoc(pipe)) {
+			struct usb_iso_packet_descriptor	*d;
+
+			d = urb->iso_frame_desc + qh->iso_idx;
+			d->actual_length = qh->segsize;
+			if (++qh->iso_idx >= urb->number_of_packets) {
+				done = true;
+			} else {
+				d++;
+				buf = urb->transfer_buffer + d->offset;
+				wLength = d->length;
+			}
+		} else if (dma) {
+			done = true;
+		} else {
+			/* see if we need to send more data, or ZLP */
+			if (qh->segsize < qh->maxpacket)
+				done = true;
+			else if (qh->offset == urb->transfer_buffer_length
+					&& !(urb->transfer_flags
+						& URB_ZERO_PACKET))
+				done = true;
+			if (!done) {
+				buf = urb->transfer_buffer
+						+ qh->offset;
+				wLength = urb->transfer_buffer_length
+						- qh->offset;
+			}
+		}
+	}
+
+	/* urb->status != -EINPROGRESS means request has been faulted,
+	 * so we must abort this transfer after cleanup
+	 */
+	if (urb->status != -EINPROGRESS) {
+		done = true;
+		if (status == 0)
+			status = urb->status;
+	}
+
+	if (done) {
+		/* set status */
+		urb->status = status;
+		urb->actual_length = qh->offset;
+		musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
+
+	} else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) {
+		/* WARN_ON(!buf); */
+
+		/* REVISIT:  some docs say that when hw_ep->tx_double_buffered,
+		 * (and presumably, fifo is not half-full) we should write TWO
+		 * packets before updating TXCSR ... other docs disagree ...
+		 */
+		/* PIO:  start next packet in this URB */
+		wLength = min(qh->maxpacket, (u16) wLength);
+		musb_write_fifo(hw_ep, wLength, buf);
+		qh->segsize = wLength;
+
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_TXCSR,
+				MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
+	} else
+		DBG(1, "not complete, but dma enabled?\n");
+
+finish:
+	return;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Host side RX (IN) using Mentor DMA works as follows:
+	submit_urb ->
+		- if queue was empty, ProgramEndpoint
+		- first IN token is sent out (by setting ReqPkt)
+	LinuxIsr -> RxReady()
+	/\	=> first packet is received
+	|	- Set in mode 0 (DmaEnab, ~ReqPkt)
+	|		-> DMA Isr (transfer complete) -> RxReady()
+	|		    - Ack receive (~RxPktRdy), turn off DMA (~DmaEnab)
+	|		    - if urb not complete, send next IN token (ReqPkt)
+	|			   |		else complete urb.
+	|			   |
+	---------------------------
+ *
+ * Nuances of mode 1:
+ *	For short packets, no ack (+RxPktRdy) is sent automatically
+ *	(even if AutoClear is ON)
+ *	For full packets, ack (~RxPktRdy) and next IN token (+ReqPkt) is sent
+ *	automatically => major problem, as collecting the next packet becomes
+ *	difficult. Hence mode 1 is not used.
+ *
+ * REVISIT
+ *	All we care about at this driver level is that
+ *       (a) all URBs terminate with REQPKT cleared and fifo(s) empty;
+ *       (b) termination conditions are: short RX, or buffer full;
+ *       (c) fault modes include
+ *           - iff URB_SHORT_NOT_OK, short RX status is -EREMOTEIO.
+ *             (and that endpoint's dma queue stops immediately)
+ *           - overflow (full, PLUS more bytes in the terminal packet)
+ *
+ *	So for example, usb-storage sets URB_SHORT_NOT_OK, and would
+ *	thus be a great candidate for using mode 1 ... for all but the
+ *	last packet of one URB's transfer.
+ */
+
+#endif
+
+/*
+ * Service an RX interrupt for the given IN endpoint; docs cover bulk, iso,
+ * and high-bandwidth IN transfer cases.
+ */
+void musb_host_rx(struct musb *musb, u8 epnum)
+{
+	struct urb		*urb;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	size_t			xfer_len;
+	void __iomem		*mbase = musb->mregs;
+	int			pipe;
+	u16			rx_csr, val;
+	bool			iso_err = false;
+	bool			done = false;
+	u32			status;
+	struct dma_channel	*dma;
+
+	musb_ep_select(mbase, epnum);
+
+	urb = next_urb(qh);
+	dma = is_dma_capable() ? hw_ep->rx_channel : NULL;
+	status = 0;
+	xfer_len = 0;
+
+	rx_csr = musb_readw(epio, MUSB_RXCSR);
+	val = rx_csr;
+
+	if (unlikely(!urb)) {
+		/* REVISIT -- THIS SHOULD NEVER HAPPEN ... but, at least
+		 * usbtest #11 (unlinks) triggers it regularly, sometimes
+		 * with fifo full.  (Only with DMA??)
+		 */
+		DBG(3, "BOGUS RX%d ready, csr %04x, count %d\n", epnum, val,
+			musb_readw(epio, MUSB_RXCOUNT));
+		musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
+		return;
+	}
+
+	pipe = urb->pipe;
+
+	DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
+		epnum, rx_csr, urb->actual_length,
+		dma ? dma->actual_len : 0);
+
+	/* check for errors, concurrent stall & unlink is not really
+	 * handled yet! */
+	if (rx_csr & MUSB_RXCSR_H_RXSTALL) {
+		DBG(3, "RX end %d STALL\n", epnum);
+
+		/* stall; record URB status */
+		status = -EPIPE;
+
+	} else if (rx_csr & MUSB_RXCSR_H_ERROR) {
+		DBG(3, "end %d RX proto error\n", epnum);
+
+		status = -EPROTO;
+		musb_writeb(epio, MUSB_RXINTERVAL, 0);
+
+	} else if (rx_csr & MUSB_RXCSR_DATAERROR) {
+
+		if (USB_ENDPOINT_XFER_ISOC != qh->type) {
+			/* NOTE this code path would be a good place to PAUSE a
+			 * transfer, if there's some other (nonperiodic) rx urb
+			 * that could use this fifo.  (dma complicates it...)
+			 *
+			 * if (bulk && qh->ring.next != &musb->in_bulk), then
+			 * we have a candidate... NAKing is *NOT* an error
+			 */
+			DBG(6, "RX end %d NAK timeout\n", epnum);
+			musb_ep_select(mbase, epnum);
+			musb_writew(epio, MUSB_RXCSR,
+					MUSB_RXCSR_H_WZC_BITS
+					| MUSB_RXCSR_H_REQPKT);
+
+			goto finish;
+		} else {
+			DBG(4, "RX end %d ISO data error\n", epnum);
+			/* packet error reported later */
+			iso_err = true;
+		}
+	}
+
+	/* faults abort the transfer */
+	if (status) {
+		/* clean up dma and collect transfer count */
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+			xfer_len = dma->actual_len;
+		}
+		musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
+		musb_writeb(epio, MUSB_RXINTERVAL, 0);
+		done = true;
+		goto finish;
+	}
+
+	if (unlikely(dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY)) {
+		/* SHOULD NEVER HAPPEN ... but at least DaVinci has done it */
+		ERR("RX%d dma busy, csr %04x\n", epnum, rx_csr);
+		goto finish;
+	}
+
+	/* thorough shutdown for now ... given more precise fault handling
+	 * and better queueing support, we might keep a DMA pipeline going
+	 * while processing this irq for earlier completions.
+	 */
+
+	/* FIXME this is _way_ too much in-line logic for Mentor DMA */
+
+#ifndef CONFIG_USB_INVENTRA_DMA
+	if (rx_csr & MUSB_RXCSR_H_REQPKT)  {
+		/* REVISIT this happened for a while on some short reads...
+		 * the cleanup still needs investigation... looks bad...
+		 * and also duplicates dma cleanup code above ... plus,
+		 * shouldn't this be the "half full" double buffer case?
+		 */
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+			xfer_len = dma->actual_len;
+			done = true;
+		}
+
+		DBG(2, "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
+				xfer_len, dma ? ", dma" : "");
+		rx_csr &= ~MUSB_RXCSR_H_REQPKT;
+
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_RXCSR,
+				MUSB_RXCSR_H_WZC_BITS | rx_csr);
+	}
+#endif
+	if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) {
+		xfer_len = dma->actual_len;
+
+		val &= ~(MUSB_RXCSR_DMAENAB
+			| MUSB_RXCSR_H_AUTOREQ
+			| MUSB_RXCSR_AUTOCLEAR
+			| MUSB_RXCSR_RXPKTRDY);
+		musb_writew(hw_ep->regs, MUSB_RXCSR, val);
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+		/* done if urb buffer is full or short packet is recd */
+		done = (urb->actual_length + xfer_len >=
+				urb->transfer_buffer_length
+			|| dma->actual_len < qh->maxpacket);
+
+		/* send IN token for next packet, without AUTOREQ */
+		if (!done) {
+			val |= MUSB_RXCSR_H_REQPKT;
+			musb_writew(epio, MUSB_RXCSR,
+				MUSB_RXCSR_H_WZC_BITS | val);
+		}
+
+		DBG(4, "ep %d dma %s, rxcsr %04x, rxcount %d\n", epnum,
+			done ? "off" : "reset",
+			musb_readw(epio, MUSB_RXCSR),
+			musb_readw(epio, MUSB_RXCOUNT));
+#else
+		done = true;
+#endif
+	} else if (urb->status == -EINPROGRESS) {
+		/* if no errors, be sure a packet is ready for unloading */
+		if (unlikely(!(rx_csr & MUSB_RXCSR_RXPKTRDY))) {
+			status = -EPROTO;
+			ERR("Rx interrupt with no errors or packet!\n");
+
+			/* FIXME this is another "SHOULD NEVER HAPPEN" */
+
+/* SCRUB (RX) */
+			/* do the proper sequence to abort the transfer */
+			musb_ep_select(mbase, epnum);
+			val &= ~MUSB_RXCSR_H_REQPKT;
+			musb_writew(epio, MUSB_RXCSR, val);
+			goto finish;
+		}
+
+		/* we are expecting IN packets */
+#ifdef CONFIG_USB_INVENTRA_DMA
+		if (dma) {
+			struct dma_controller	*c;
+			u16			rx_count;
+			int			ret;
+
+			rx_count = musb_readw(epio, MUSB_RXCOUNT);
+
+			DBG(2, "RX%d count %d, buffer 0x%x len %d/%d\n",
+					epnum, rx_count,
+					urb->transfer_dma
+						+ urb->actual_length,
+					qh->offset,
+					urb->transfer_buffer_length);
+
+			c = musb->dma_controller;
+
+			dma->desired_mode = 0;
+#ifdef USE_MODE1
+			/* because of the issue below, mode 1 will
+			 * only rarely behave with correct semantics.
+			 */
+			if ((urb->transfer_flags &
+						URB_SHORT_NOT_OK)
+				&& (urb->transfer_buffer_length -
+						urb->actual_length)
+					> qh->maxpacket)
+				dma->desired_mode = 1;
+#endif
+
+/* Disadvantage of using mode 1:
+ *	It's basically usable only for mass storage class; essentially all
+ *	other protocols also terminate transfers on short packets.
+ *
+ * Details:
+ *	An extra IN token is sent at the end of the transfer (due to AUTOREQ)
+ *	If you try to use mode 1 for (transfer_buffer_length - 512), and try
+ *	to use the extra IN token to grab the last packet using mode 0, then
+ *	the problem is that you cannot be sure when the device will send the
+ *	last packet and RxPktRdy set. Sometimes the packet is recd too soon
+ *	such that it gets lost when RxCSR is re-set at the end of the mode 1
+ *	transfer, while sometimes it is recd just a little late so that if you
+ *	try to configure for mode 0 soon after the mode 1 transfer is
+ *	completed, you will find rxcount 0. Okay, so you might think why not
+ *	wait for an interrupt when the pkt is recd. Well, you won't get any!
+ */
+
+			val = musb_readw(epio, MUSB_RXCSR);
+			val &= ~MUSB_RXCSR_H_REQPKT;
+
+			if (dma->desired_mode == 0)
+				val &= ~MUSB_RXCSR_H_AUTOREQ;
+			else
+				val |= MUSB_RXCSR_H_AUTOREQ;
+			val |= MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB;
+
+			musb_writew(epio, MUSB_RXCSR,
+				MUSB_RXCSR_H_WZC_BITS | val);
+
+			/* REVISIT if when actual_length != 0,
+			 * transfer_buffer_length needs to be
+			 * adjusted first...
+			 */
+			ret = c->channel_program(
+				dma, qh->maxpacket,
+				dma->desired_mode,
+				urb->transfer_dma
+					+ urb->actual_length,
+				(dma->desired_mode == 0)
+					? rx_count
+					: urb->transfer_buffer_length);
+
+			if (!ret) {
+				c->channel_release(dma);
+				hw_ep->rx_channel = NULL;
+				dma = NULL;
+				/* REVISIT reset CSR */
+			}
+		}
+#endif	/* Mentor DMA */
+
+		if (!dma) {
+			done = musb_host_packet_rx(musb, urb,
+					epnum, iso_err);
+			DBG(6, "read %spacket\n", done ? "last " : "");
+		}
+	}
+
+	if (dma && usb_pipeisoc(pipe)) {
+		struct usb_iso_packet_descriptor	*d;
+		int					iso_stat = status;
+
+		d = urb->iso_frame_desc + qh->iso_idx;
+		d->actual_length += xfer_len;
+		if (iso_err) {
+			iso_stat = -EILSEQ;
+			urb->error_count++;
+		}
+		d->status = iso_stat;
+	}
+
+finish:
+	urb->actual_length += xfer_len;
+	qh->offset += xfer_len;
+	if (done) {
+		if (urb->status == -EINPROGRESS)
+			urb->status = status;
+		musb_advance_schedule(musb, urb, hw_ep, USB_DIR_IN);
+	}
+}
+
+/* schedule nodes correspond to peripheral endpoints, like an OHCI QH.
+ * the software schedule associates multiple such nodes with a given
+ * host side hardware endpoint + direction; scheduling may activate
+ * that hardware endpoint.
+ */
+static int musb_schedule(
+	struct musb		*musb,
+	struct musb_qh		*qh,
+	int			is_in)
+{
+	int			idle;
+	int			best_diff;
+	int			best_end, epnum;
+	struct musb_hw_ep	*hw_ep = NULL;
+	struct list_head	*head = NULL;
+
+	/* use fixed hardware for control and bulk */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		head = &musb->control;
+		hw_ep = musb->control_ep;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		hw_ep = musb->bulk_ep;
+		if (is_in)
+			head = &musb->in_bulk;
+		else
+			head = &musb->out_bulk;
+		break;
+	}
+	if (head) {
+		idle = list_empty(head);
+		list_add_tail(&qh->ring, head);
+		goto success;
+	}
+
+	/* else, periodic transfers get muxed to other endpoints */
+
+	/* FIXME this doesn't consider direction, so it can only
+	 * work for one half of the endpoint hardware, and assumes
+	 * the previous cases handled all non-shared endpoints...
+	 */
+
+	/* we know this qh hasn't been scheduled, so all we need to do
+	 * is choose which hardware endpoint to put it on ...
+	 *
+	 * REVISIT what we really want here is a regular schedule tree
+	 * like e.g. OHCI uses, but for now musb->periodic is just an
+	 * array of the _single_ logical endpoint associated with a
+	 * given physical one (identity mapping logical->physical).
+	 *
+	 * that simplistic approach makes TT scheduling a lot simpler;
+	 * there is none, and thus none of its complexity...
+	 */
+	best_diff = 4096;
+	best_end = -1;
+
+	for (epnum = 1; epnum < musb->nr_endpoints; epnum++) {
+		int	diff;
+
+		if (musb->periodic[epnum])
+			continue;
+		hw_ep = &musb->endpoints[epnum];
+		if (hw_ep == musb->bulk_ep)
+			continue;
+
+		if (is_in)
+			diff = hw_ep->max_packet_sz_rx - qh->maxpacket;
+		else
+			diff = hw_ep->max_packet_sz_tx - qh->maxpacket;
+
+		if (diff > 0 && best_diff > diff) {
+			best_diff = diff;
+			best_end = epnum;
+		}
+	}
+	if (best_end < 0)
+		return -ENOSPC;
+
+	idle = 1;
+	hw_ep = musb->endpoints + best_end;
+	musb->periodic[best_end] = qh;
+	DBG(4, "qh %p periodic slot %d\n", qh, best_end);
+success:
+	qh->hw_ep = hw_ep;
+	qh->hep->hcpriv = qh;
+	if (idle)
+		musb_start_urb(musb, is_in, qh);
+	return 0;
+}
+
+static int musb_urb_enqueue(
+	struct usb_hcd			*hcd,
+	struct urb			*urb,
+	gfp_t				mem_flags)
+{
+	unsigned long			flags;
+	struct musb			*musb = hcd_to_musb(hcd);
+	struct usb_host_endpoint	*hep = urb->ep;
+	struct musb_qh			*qh = hep->hcpriv;
+	struct usb_endpoint_descriptor	*epd = &hep->desc;
+	int				ret;
+	unsigned			type_reg;
+	unsigned			interval;
+
+	/* host role must be active */
+	if (!is_host_active(musb) || !musb->is_active)
+		return -ENODEV;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	spin_unlock_irqrestore(&musb->lock, flags);
+	if (ret)
+		return ret;
+
+	/* DMA mapping was already done, if needed, and this urb is on
+	 * hep->urb_list ... so there's little to do unless hep wasn't
+	 * yet scheduled onto a live qh.
+	 *
+	 * REVISIT best to keep hep->hcpriv valid until the endpoint gets
+	 * disabled, testing for empty qh->ring and avoiding qh setup costs
+	 * except for the first urb queued after a config change.
+	 */
+	if (qh) {
+		urb->hcpriv = qh;
+		return 0;
+	}
+
+	/* Allocate and initialize qh, minimizing the work done each time
+	 * hw_ep gets reprogrammed, or with irqs blocked.  Then schedule it.
+	 *
+	 * REVISIT consider a dedicated qh kmem_cache, so it's harder
+	 * for bugs in other kernel code to break this driver...
+	 */
+	qh = kzalloc(sizeof *qh, mem_flags);
+	if (!qh) {
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		return -ENOMEM;
+	}
+
+	qh->hep = hep;
+	qh->dev = urb->dev;
+	INIT_LIST_HEAD(&qh->ring);
+	qh->is_ready = 1;
+
+	qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
+
+	/* no high bandwidth support yet */
+	if (qh->maxpacket & ~0x7ff) {
+		ret = -EMSGSIZE;
+		goto done;
+	}
+
+	qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+	qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+	/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
+	qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
+
+	/* precompute rxtype/txtype/type0 register */
+	type_reg = (qh->type << 4) | qh->epnum;
+	switch (urb->dev->speed) {
+	case USB_SPEED_LOW:
+		type_reg |= 0xc0;
+		break;
+	case USB_SPEED_FULL:
+		type_reg |= 0x80;
+		break;
+	default:
+		type_reg |= 0x40;
+	}
+	qh->type_reg = type_reg;
+
+	/* precompute rxinterval/txinterval register */
+	interval = min((u8)16, epd->bInterval);	/* log encoding */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_INT:
+		/* fullspeed uses linear encoding */
+		if (USB_SPEED_FULL == urb->dev->speed) {
+			interval = epd->bInterval;
+			if (!interval)
+				interval = 1;
+		}
+		/* FALLTHROUGH */
+	case USB_ENDPOINT_XFER_ISOC:
+		/* iso always uses log encoding */
+		break;
+	default:
+		/* REVISIT we actually want to use NAK limits, hinting to the
+		 * transfer scheduling logic to try some other qh, e.g. try
+		 * for 2 msec first:
+		 *
+		 * interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16 : 2;
+		 *
+		 * The downside of disabling this is that transfer scheduling
+		 * gets VERY unfair for nonperiodic transfers; a misbehaving
+		 * peripheral could make that hurt.  Or for reads, one that's
+		 * perfectly normal:  network and other drivers keep reads
+		 * posted at all times, having one pending for a week should
+		 * be perfectly safe.
+		 *
+		 * The upside of disabling it is avoidng transfer scheduling
+		 * code to put this aside for while.
+		 */
+		interval = 0;
+	}
+	qh->intv_reg = interval;
+
+	/* precompute addressing for external hub/tt ports */
+	if (musb->is_multipoint) {
+		struct usb_device	*parent = urb->dev->parent;
+
+		if (parent != hcd->self.root_hub) {
+			qh->h_addr_reg = (u8) parent->devnum;
+
+			/* set up tt info if needed */
+			if (urb->dev->tt) {
+				qh->h_port_reg = (u8) urb->dev->ttport;
+				qh->h_addr_reg |= 0x80;
+			}
+		}
+	}
+
+	/* invariant: hep->hcpriv is null OR the qh that's already scheduled.
+	 * until we get real dma queues (with an entry for each urb/buffer),
+	 * we only have work to do in the former case.
+	 */
+	spin_lock_irqsave(&musb->lock, flags);
+	if (hep->hcpriv) {
+		/* some concurrent activity submitted another urb to hep...
+		 * odd, rare, error prone, but legal.
+		 */
+		kfree(qh);
+		ret = 0;
+	} else
+		ret = musb_schedule(musb, qh,
+				epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK);
+
+	if (ret == 0) {
+		urb->hcpriv = qh;
+		/* FIXME set urb->start_frame for iso/intr, it's tested in
+		 * musb_start_urb(), but otherwise only konicawc cares ...
+		 */
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+done:
+	if (ret != 0) {
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		kfree(qh);
+	}
+	return ret;
+}
+
+
+/*
+ * abort a transfer that's at the head of a hardware queue.
+ * called with controller locked, irqs blocked
+ * that hardware queue advances to the next transfer, unless prevented
+ */
+static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
+{
+	struct musb_hw_ep	*ep = qh->hw_ep;
+	void __iomem		*epio = ep->regs;
+	unsigned		hw_end = ep->epnum;
+	void __iomem		*regs = ep->musb->mregs;
+	u16			csr;
+	int			status = 0;
+
+	musb_ep_select(regs, hw_end);
+
+	if (is_dma_capable()) {
+		struct dma_channel	*dma;
+
+		dma = is_in ? ep->rx_channel : ep->tx_channel;
+		if (dma) {
+			status = ep->musb->dma_controller->channel_abort(dma);
+			DBG(status ? 1 : 3,
+				"abort %cX%d DMA for urb %p --> %d\n",
+				is_in ? 'R' : 'T', ep->epnum,
+				urb, status);
+			urb->actual_length += dma->actual_len;
+		}
+	}
+
+	/* turn off DMA requests, discard state, stop polling ... */
+	if (is_in) {
+		/* giveback saves bulk toggle */
+		csr = musb_h_flush_rxfifo(ep, 0);
+
+		/* REVISIT we still get an irq; should likely clear the
+		 * endpoint's irq status here to avoid bogus irqs.
+		 * clearing that status is platform-specific...
+		 */
+	} else {
+		musb_h_tx_flush_fifo(ep);
+		csr = musb_readw(epio, MUSB_TXCSR);
+		csr &= ~(MUSB_TXCSR_AUTOSET
+			| MUSB_TXCSR_DMAENAB
+			| MUSB_TXCSR_H_RXSTALL
+			| MUSB_TXCSR_H_NAKTIMEOUT
+			| MUSB_TXCSR_H_ERROR
+			| MUSB_TXCSR_TXPKTRDY);
+		musb_writew(epio, MUSB_TXCSR, csr);
+		/* REVISIT may need to clear FLUSHFIFO ... */
+		musb_writew(epio, MUSB_TXCSR, csr);
+		/* flush cpu writebuffer */
+		csr = musb_readw(epio, MUSB_TXCSR);
+	}
+	if (status == 0)
+		musb_advance_schedule(ep->musb, urb, ep, is_in);
+	return status;
+}
+
+static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct musb		*musb = hcd_to_musb(hcd);
+	struct musb_qh		*qh;
+	struct list_head	*sched;
+	unsigned long		flags;
+	int			ret;
+
+	DBG(4, "urb=%p, dev%d ep%d%s\n", urb,
+			usb_pipedevice(urb->pipe),
+			usb_pipeendpoint(urb->pipe),
+			usb_pipein(urb->pipe) ? "in" : "out");
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (ret)
+		goto done;
+
+	qh = urb->hcpriv;
+	if (!qh)
+		goto done;
+
+	/* Any URB not actively programmed into endpoint hardware can be
+	 * immediately given back.  Such an URB must be at the head of its
+	 * endpoint queue, unless someday we get real DMA queues.  And even
+	 * then, it might not be known to the hardware...
+	 *
+	 * Otherwise abort current transfer, pending dma, etc.; urb->status
+	 * has already been updated.  This is a synchronous abort; it'd be
+	 * OK to hold off until after some IRQ, though.
+	 */
+	if (!qh->is_ready || urb->urb_list.prev != &qh->hep->urb_list)
+		ret = -EINPROGRESS;
+	else {
+		switch (qh->type) {
+		case USB_ENDPOINT_XFER_CONTROL:
+			sched = &musb->control;
+			break;
+		case USB_ENDPOINT_XFER_BULK:
+			if (usb_pipein(urb->pipe))
+				sched = &musb->in_bulk;
+			else
+				sched = &musb->out_bulk;
+			break;
+		default:
+			/* REVISIT when we get a schedule tree, periodic
+			 * transfers won't always be at the head of a
+			 * singleton queue...
+			 */
+			sched = NULL;
+			break;
+		}
+	}
+
+	/* NOTE:  qh is invalid unless !list_empty(&hep->urb_list) */
+	if (ret < 0 || (sched && qh != first_qh(sched))) {
+		int	ready = qh->is_ready;
+
+		ret = 0;
+		qh->is_ready = 0;
+		__musb_giveback(musb, urb, 0);
+		qh->is_ready = ready;
+	} else
+		ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return ret;
+}
+
+/* disable an endpoint */
+static void
+musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
+{
+	u8			epnum = hep->desc.bEndpointAddress;
+	unsigned long		flags;
+	struct musb		*musb = hcd_to_musb(hcd);
+	u8			is_in = epnum & USB_DIR_IN;
+	struct musb_qh		*qh = hep->hcpriv;
+	struct urb		*urb, *tmp;
+	struct list_head	*sched;
+
+	if (!qh)
+		return;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		sched = &musb->control;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		if (is_in)
+			sched = &musb->in_bulk;
+		else
+			sched = &musb->out_bulk;
+		break;
+	default:
+		/* REVISIT when we get a schedule tree, periodic transfers
+		 * won't always be at the head of a singleton queue...
+		 */
+		sched = NULL;
+		break;
+	}
+
+	/* NOTE:  qh is invalid unless !list_empty(&hep->urb_list) */
+
+	/* kick first urb off the hardware, if needed */
+	qh->is_ready = 0;
+	if (!sched || qh == first_qh(sched)) {
+		urb = next_urb(qh);
+
+		/* make software (then hardware) stop ASAP */
+		if (!urb->unlinked)
+			urb->status = -ESHUTDOWN;
+
+		/* cleanup */
+		musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+	} else
+		urb = NULL;
+
+	/* then just nuke all the others */
+	list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list)
+		musb_giveback(qh, urb, -ESHUTDOWN);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static int musb_h_get_frame_number(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	return musb_readw(musb->mregs, MUSB_FRAME);
+}
+
+static int musb_h_start(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	/* NOTE: musb_start() is called when the hub driver turns
+	 * on port power, or when (OTG) peripheral starts.
+	 */
+	hcd->state = HC_STATE_RUNNING;
+	musb->port1_status = 0;
+	return 0;
+}
+
+static void musb_h_stop(struct usb_hcd *hcd)
+{
+	musb_stop(hcd_to_musb(hcd));
+	hcd->state = HC_STATE_HALT;
+}
+
+static int musb_bus_suspend(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	if (musb->xceiv.state == OTG_STATE_A_SUSPEND)
+		return 0;
+
+	if (is_host_active(musb) && musb->is_active) {
+		WARNING("trying to suspend as %s is_active=%i\n",
+			otg_state_string(musb), musb->is_active);
+		return -EBUSY;
+	} else
+		return 0;
+}
+
+static int musb_bus_resume(struct usb_hcd *hcd)
+{
+	/* resuming child port does the work */
+	return 0;
+}
+
+const struct hc_driver musb_hc_driver = {
+	.description		= "musb-hcd",
+	.product_desc		= "MUSB HDRC host driver",
+	.hcd_priv_size		= sizeof(struct musb),
+	.flags			= HCD_USB2 | HCD_MEMORY,
+
+	/* not using irq handler or reset hooks from usbcore, since
+	 * those must be shared with peripheral code for OTG configs
+	 */
+
+	.start			= musb_h_start,
+	.stop			= musb_h_stop,
+
+	.get_frame_number	= musb_h_get_frame_number,
+
+	.urb_enqueue		= musb_urb_enqueue,
+	.urb_dequeue		= musb_urb_dequeue,
+	.endpoint_disable	= musb_h_disable,
+
+	.hub_status_data	= musb_hub_status_data,
+	.hub_control		= musb_hub_control,
+	.bus_suspend		= musb_bus_suspend,
+	.bus_resume		= musb_bus_resume,
+	/* .start_port_reset	= NULL, */
+	/* .hub_irq_enable	= NULL, */
+};
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
new file mode 100644
index 000000000000..77bcdb9d5b32
--- /dev/null
+++ b/drivers/usb/musb/musb_host.h
@@ -0,0 +1,110 @@
+/*
+ * MUSB OTG driver host defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef _MUSB_HOST_H
+#define _MUSB_HOST_H
+
+static inline struct usb_hcd *musb_to_hcd(struct musb *musb)
+{
+	return container_of((void *) musb, struct usb_hcd, hcd_priv);
+}
+
+static inline struct musb *hcd_to_musb(struct usb_hcd *hcd)
+{
+	return (struct musb *) (hcd->hcd_priv);
+}
+
+/* stored in "usb_host_endpoint.hcpriv" for scheduled endpoints */
+struct musb_qh {
+	struct usb_host_endpoint *hep;		/* usbcore info */
+	struct usb_device	*dev;
+	struct musb_hw_ep	*hw_ep;		/* current binding */
+
+	struct list_head	ring;		/* of musb_qh */
+	/* struct musb_qh		*next; */	/* for periodic tree */
+
+	unsigned		offset;		/* in urb->transfer_buffer */
+	unsigned		segsize;	/* current xfer fragment */
+
+	u8			type_reg;	/* {rx,tx} type register */
+	u8			intv_reg;	/* {rx,tx} interval register */
+	u8			addr_reg;	/* device address register */
+	u8			h_addr_reg;	/* hub address register */
+	u8			h_port_reg;	/* hub port register */
+
+	u8			is_ready;	/* safe to modify hw_ep */
+	u8			type;		/* XFERTYPE_* */
+	u8			epnum;
+	u16			maxpacket;
+	u16			frame;		/* for periodic schedule */
+	unsigned		iso_idx;	/* in urb->iso_frame_desc[] */
+};
+
+/* map from control or bulk queue head to the first qh on that ring */
+static inline struct musb_qh *first_qh(struct list_head *q)
+{
+	if (list_empty(q))
+		return NULL;
+	return list_entry(q->next, struct musb_qh, ring);
+}
+
+
+extern void musb_root_disconnect(struct musb *musb);
+
+struct usb_hcd;
+
+extern int musb_hub_status_data(struct usb_hcd *hcd, char *buf);
+extern int musb_hub_control(struct usb_hcd *hcd,
+			u16 typeReq, u16 wValue, u16 wIndex,
+			char *buf, u16 wLength);
+
+extern const struct hc_driver musb_hc_driver;
+
+static inline struct urb *next_urb(struct musb_qh *qh)
+{
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	struct list_head	*queue;
+
+	if (!qh)
+		return NULL;
+	queue = &qh->hep->urb_list;
+	if (list_empty(queue))
+		return NULL;
+	return list_entry(queue->next, struct urb, urb_list);
+#else
+	return NULL;
+#endif
+}
+
+#endif				/* _MUSB_HOST_H */
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
new file mode 100644
index 000000000000..6bbedae83af8
--- /dev/null
+++ b/drivers/usb/musb/musb_io.h
@@ -0,0 +1,115 @@
+/*
+ * MUSB OTG driver register I/O
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_LINUX_PLATFORM_ARCH_H__
+#define __MUSB_LINUX_PLATFORM_ARCH_H__
+
+#include <linux/io.h>
+
+#ifndef	CONFIG_ARM
+static inline void readsl(const void __iomem *addr, void *buf, int len)
+	{ insl((unsigned long)addr, buf, len); }
+static inline void readsw(const void __iomem *addr, void *buf, int len)
+	{ insw((unsigned long)addr, buf, len); }
+static inline void readsb(const void __iomem *addr, void *buf, int len)
+	{ insb((unsigned long)addr, buf, len); }
+
+static inline void writesl(const void __iomem *addr, const void *buf, int len)
+	{ outsl((unsigned long)addr, buf, len); }
+static inline void writesw(const void __iomem *addr, const void *buf, int len)
+	{ outsw((unsigned long)addr, buf, len); }
+static inline void writesb(const void __iomem *addr, const void *buf, int len)
+	{ outsb((unsigned long)addr, buf, len); }
+
+#endif
+
+/* NOTE:  these offsets are all in bytes */
+
+static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
+	{ return __raw_readw(addr + offset); }
+
+static inline u32 musb_readl(const void __iomem *addr, unsigned offset)
+	{ return __raw_readl(addr + offset); }
+
+
+static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
+	{ __raw_writew(data, addr + offset); }
+
+static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
+	{ __raw_writel(data, addr + offset); }
+
+
+#ifdef CONFIG_USB_TUSB6010
+
+/*
+ * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
+ */
+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+{
+	u16 tmp;
+	u8 val;
+
+	tmp = __raw_readw(addr + (offset & ~1));
+	if (offset & 1)
+		val = (tmp >> 8);
+	else
+		val = tmp & 0xff;
+
+	return val;
+}
+
+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(addr + (offset & ~1));
+	if (offset & 1)
+		tmp = (data << 8) | (tmp & 0xff);
+	else
+		tmp = (tmp & 0xff00) | data;
+
+	__raw_writew(tmp, addr + (offset & ~1));
+}
+
+#else
+
+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+	{ return __raw_readb(addr + offset); }
+
+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
+	{ __raw_writeb(data, addr + offset); }
+
+#endif	/* CONFIG_USB_TUSB6010 */
+
+#endif
diff --git a/drivers/usb/musb/musb_procfs.c b/drivers/usb/musb/musb_procfs.c
new file mode 100644
index 000000000000..55e6b78bdccc
--- /dev/null
+++ b/drivers/usb/musb/musb_procfs.c
@@ -0,0 +1,830 @@
+/*
+ * MUSB OTG driver debug support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>	/* FIXME remove procfs writes */
+#include <asm/arch/hardware.h>
+
+#include "musb_core.h"
+
+#include "davinci.h"
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+
+static int dump_qh(struct musb_qh *qh, char *buf, unsigned max)
+{
+	int				count;
+	int				tmp;
+	struct usb_host_endpoint	*hep = qh->hep;
+	struct urb			*urb;
+
+	count = snprintf(buf, max, "    qh %p dev%d ep%d%s max%d\n",
+			qh, qh->dev->devnum, qh->epnum,
+			({ char *s; switch (qh->type) {
+			case USB_ENDPOINT_XFER_BULK:
+				s = "-bulk"; break;
+			case USB_ENDPOINT_XFER_INT:
+				s = "-int"; break;
+			case USB_ENDPOINT_XFER_CONTROL:
+				s = ""; break;
+			default:
+				s = "iso"; break;
+			}; s; }),
+			qh->maxpacket);
+	if (count <= 0)
+		return 0;
+	buf += count;
+	max -= count;
+
+	list_for_each_entry(urb, &hep->urb_list, urb_list) {
+		tmp = snprintf(buf, max, "\t%s urb %p %d/%d\n",
+				usb_pipein(urb->pipe) ? "in" : "out",
+				urb, urb->actual_length,
+				urb->transfer_buffer_length);
+		if (tmp <= 0)
+			break;
+		tmp = min(tmp, (int)max);
+		count += tmp;
+		buf += tmp;
+		max -= tmp;
+	}
+	return count;
+}
+
+static int
+dump_queue(struct list_head *q, char *buf, unsigned max)
+{
+	int		count = 0;
+	struct musb_qh	*qh;
+
+	list_for_each_entry(qh, q, ring) {
+		int	tmp;
+
+		tmp = dump_qh(qh, buf, max);
+		if (tmp <= 0)
+			break;
+		tmp = min(tmp, (int)max);
+		count += tmp;
+		buf += tmp;
+		max -= tmp;
+	}
+	return count;
+}
+
+#endif	/* HCD */
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+static int dump_ep(struct musb_ep *ep, char *buffer, unsigned max)
+{
+	char		*buf = buffer;
+	int		code = 0;
+	void __iomem	*regs = ep->hw_ep->regs;
+	char		*mode = "1buf";
+
+	if (ep->is_in) {
+		if (ep->hw_ep->tx_double_buffered)
+			mode = "2buf";
+	} else {
+		if (ep->hw_ep->rx_double_buffered)
+			mode = "2buf";
+	}
+
+	do {
+		struct usb_request	*req;
+
+		code = snprintf(buf, max,
+				"\n%s (hw%d): %s%s, csr %04x maxp %04x\n",
+				ep->name, ep->current_epnum,
+				mode, ep->dma ? " dma" : "",
+				musb_readw(regs,
+					(ep->is_in || !ep->current_epnum)
+						? MUSB_TXCSR
+						: MUSB_RXCSR),
+				musb_readw(regs, ep->is_in
+						? MUSB_TXMAXP
+						: MUSB_RXMAXP)
+				);
+		if (code <= 0)
+			break;
+		code = min(code, (int) max);
+		buf += code;
+		max -= code;
+
+		if (is_cppi_enabled() && ep->current_epnum) {
+			unsigned	cppi = ep->current_epnum - 1;
+			void __iomem	*base = ep->musb->ctrl_base;
+			unsigned	off1 = cppi << 2;
+			void __iomem	*ram = base;
+			char		tmp[16];
+
+			if (ep->is_in) {
+				ram += DAVINCI_TXCPPI_STATERAM_OFFSET(cppi);
+				tmp[0] = 0;
+			} else {
+				ram += DAVINCI_RXCPPI_STATERAM_OFFSET(cppi);
+				snprintf(tmp, sizeof tmp, "%d left, ",
+					musb_readl(base,
+					DAVINCI_RXCPPI_BUFCNT0_REG + off1));
+			}
+
+			code = snprintf(buf, max, "%cX DMA%d: %s"
+					"%08x %08x, %08x %08x; "
+					"%08x %08x %08x .. %08x\n",
+				ep->is_in ? 'T' : 'R',
+				ep->current_epnum - 1, tmp,
+				musb_readl(ram, 0 * 4),
+				musb_readl(ram, 1 * 4),
+				musb_readl(ram, 2 * 4),
+				musb_readl(ram, 3 * 4),
+				musb_readl(ram, 4 * 4),
+				musb_readl(ram, 5 * 4),
+				musb_readl(ram, 6 * 4),
+				musb_readl(ram, 7 * 4));
+			if (code <= 0)
+				break;
+			code = min(code, (int) max);
+			buf += code;
+			max -= code;
+		}
+
+		if (list_empty(&ep->req_list)) {
+			code = snprintf(buf, max, "\t(queue empty)\n");
+			if (code <= 0)
+				break;
+			code = min(code, (int) max);
+			buf += code;
+			max -= code;
+			break;
+		}
+		list_for_each_entry(req, &ep->req_list, list) {
+			code = snprintf(buf, max, "\treq %p, %s%s%d/%d\n",
+					req,
+					req->zero ? "zero, " : "",
+					req->short_not_ok ? "!short, " : "",
+					req->actual, req->length);
+			if (code <= 0)
+				break;
+			code = min(code, (int) max);
+			buf += code;
+			max -= code;
+		}
+	} while (0);
+	return buf - buffer;
+}
+#endif
+
+static int
+dump_end_info(struct musb *musb, u8 epnum, char *aBuffer, unsigned max)
+{
+	int			code = 0;
+	char			*buf = aBuffer;
+	struct musb_hw_ep	*hw_ep = &musb->endpoints[epnum];
+
+	do {
+		musb_ep_select(musb->mregs, epnum);
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		if (is_host_active(musb)) {
+			int		dump_rx, dump_tx;
+			void __iomem	*regs = hw_ep->regs;
+
+			/* TEMPORARY (!) until we have a real periodic
+			 * schedule tree ...
+			 */
+			if (!epnum) {
+				/* control is shared, uses RX queue
+				 * but (mostly) shadowed tx registers
+				 */
+				dump_tx = !list_empty(&musb->control);
+				dump_rx = 0;
+			} else if (hw_ep == musb->bulk_ep) {
+				dump_tx = !list_empty(&musb->out_bulk);
+				dump_rx = !list_empty(&musb->in_bulk);
+			} else if (musb->periodic[epnum]) {
+				struct usb_host_endpoint	*hep;
+
+				hep = musb->periodic[epnum]->hep;
+				dump_rx = hep->desc.bEndpointAddress
+						& USB_ENDPOINT_DIR_MASK;
+				dump_tx = !dump_rx;
+			} else
+				break;
+			/* END TEMPORARY */
+
+
+			if (dump_rx) {
+				code = snprintf(buf, max,
+					"\nRX%d: %s rxcsr %04x interval %02x "
+					"max %04x type %02x; "
+					"dev %d hub %d port %d"
+					"\n",
+					epnum,
+					hw_ep->rx_double_buffered
+						? "2buf" : "1buf",
+					musb_readw(regs, MUSB_RXCSR),
+					musb_readb(regs, MUSB_RXINTERVAL),
+					musb_readw(regs, MUSB_RXMAXP),
+					musb_readb(regs, MUSB_RXTYPE),
+					/* FIXME:  assumes multipoint */
+					musb_readb(musb->mregs,
+						MUSB_BUSCTL_OFFSET(epnum,
+						MUSB_RXFUNCADDR)),
+					musb_readb(musb->mregs,
+						MUSB_BUSCTL_OFFSET(epnum,
+						MUSB_RXHUBADDR)),
+					musb_readb(musb->mregs,
+						MUSB_BUSCTL_OFFSET(epnum,
+						MUSB_RXHUBPORT))
+					);
+				if (code <= 0)
+					break;
+				code = min(code, (int) max);
+				buf += code;
+				max -= code;
+
+				if (is_cppi_enabled()
+						&& epnum
+						&& hw_ep->rx_channel) {
+					unsigned	cppi = epnum - 1;
+					unsigned	off1 = cppi << 2;
+					void __iomem	*base;
+					void __iomem	*ram;
+					char		tmp[16];
+
+					base = musb->ctrl_base;
+					ram = DAVINCI_RXCPPI_STATERAM_OFFSET(
+							cppi) + base;
+					snprintf(tmp, sizeof tmp, "%d left, ",
+						musb_readl(base,
+						DAVINCI_RXCPPI_BUFCNT0_REG
+								+ off1));
+
+					code = snprintf(buf, max,
+						"    rx dma%d: %s"
+						"%08x %08x, %08x %08x; "
+						"%08x %08x %08x .. %08x\n",
+						cppi, tmp,
+						musb_readl(ram, 0 * 4),
+						musb_readl(ram, 1 * 4),
+						musb_readl(ram, 2 * 4),
+						musb_readl(ram, 3 * 4),
+						musb_readl(ram, 4 * 4),
+						musb_readl(ram, 5 * 4),
+						musb_readl(ram, 6 * 4),
+						musb_readl(ram, 7 * 4));
+					if (code <= 0)
+						break;
+					code = min(code, (int) max);
+					buf += code;
+					max -= code;
+				}
+
+				if (hw_ep == musb->bulk_ep
+						&& !list_empty(
+							&musb->in_bulk)) {
+					code = dump_queue(&musb->in_bulk,
+							buf, max);
+					if (code <= 0)
+						break;
+					code = min(code, (int) max);
+					buf += code;
+					max -= code;
+				} else if (musb->periodic[epnum]) {
+					code = dump_qh(musb->periodic[epnum],
+							buf, max);
+					if (code <= 0)
+						break;
+					code = min(code, (int) max);
+					buf += code;
+					max -= code;
+				}
+			}
+
+			if (dump_tx) {
+				code = snprintf(buf, max,
+					"\nTX%d: %s txcsr %04x interval %02x "
+					"max %04x type %02x; "
+					"dev %d hub %d port %d"
+					"\n",
+					epnum,
+					hw_ep->tx_double_buffered
+						? "2buf" : "1buf",
+					musb_readw(regs, MUSB_TXCSR),
+					musb_readb(regs, MUSB_TXINTERVAL),
+					musb_readw(regs, MUSB_TXMAXP),
+					musb_readb(regs, MUSB_TXTYPE),
+					/* FIXME:  assumes multipoint */
+					musb_readb(musb->mregs,
+						MUSB_BUSCTL_OFFSET(epnum,
+						MUSB_TXFUNCADDR)),
+					musb_readb(musb->mregs,
+						MUSB_BUSCTL_OFFSET(epnum,
+						MUSB_TXHUBADDR)),
+					musb_readb(musb->mregs,
+						MUSB_BUSCTL_OFFSET(epnum,
+						MUSB_TXHUBPORT))
+					);
+				if (code <= 0)
+					break;
+				code = min(code, (int) max);
+				buf += code;
+				max -= code;
+
+				if (is_cppi_enabled()
+						&& epnum
+						&& hw_ep->tx_channel) {
+					unsigned	cppi = epnum - 1;
+					void __iomem	*base;
+					void __iomem	*ram;
+
+					base = musb->ctrl_base;
+					ram = DAVINCI_RXCPPI_STATERAM_OFFSET(
+							cppi) + base;
+					code = snprintf(buf, max,
+						"    tx dma%d: "
+						"%08x %08x, %08x %08x; "
+						"%08x %08x %08x .. %08x\n",
+						cppi,
+						musb_readl(ram, 0 * 4),
+						musb_readl(ram, 1 * 4),
+						musb_readl(ram, 2 * 4),
+						musb_readl(ram, 3 * 4),
+						musb_readl(ram, 4 * 4),
+						musb_readl(ram, 5 * 4),
+						musb_readl(ram, 6 * 4),
+						musb_readl(ram, 7 * 4));
+					if (code <= 0)
+						break;
+					code = min(code, (int) max);
+					buf += code;
+					max -= code;
+				}
+
+				if (hw_ep == musb->control_ep
+						&& !list_empty(
+							&musb->control)) {
+					code = dump_queue(&musb->control,
+							buf, max);
+					if (code <= 0)
+						break;
+					code = min(code, (int) max);
+					buf += code;
+					max -= code;
+				} else if (hw_ep == musb->bulk_ep
+						&& !list_empty(
+							&musb->out_bulk)) {
+					code = dump_queue(&musb->out_bulk,
+							buf, max);
+					if (code <= 0)
+						break;
+					code = min(code, (int) max);
+					buf += code;
+					max -= code;
+				} else if (musb->periodic[epnum]) {
+					code = dump_qh(musb->periodic[epnum],
+							buf, max);
+					if (code <= 0)
+						break;
+					code = min(code, (int) max);
+					buf += code;
+					max -= code;
+				}
+			}
+		}
+#endif
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+		if (is_peripheral_active(musb)) {
+			code = 0;
+
+			if (hw_ep->ep_in.desc || !epnum) {
+				code = dump_ep(&hw_ep->ep_in, buf, max);
+				if (code <= 0)
+					break;
+				code = min(code, (int) max);
+				buf += code;
+				max -= code;
+			}
+			if (hw_ep->ep_out.desc) {
+				code = dump_ep(&hw_ep->ep_out, buf, max);
+				if (code <= 0)
+					break;
+				code = min(code, (int) max);
+				buf += code;
+				max -= code;
+			}
+		}
+#endif
+	} while (0);
+
+	return buf - aBuffer;
+}
+
+/* Dump the current status and compile options.
+ * @param musb the device driver instance
+ * @param buffer where to dump the status; it must be big enough to hold the
+ * result otherwise "BAD THINGS HAPPENS(TM)".
+ */
+static int dump_header_stats(struct musb *musb, char *buffer)
+{
+	int code, count = 0;
+	const void __iomem *mbase = musb->mregs;
+
+	*buffer = 0;
+	count = sprintf(buffer, "Status: %sHDRC, Mode=%s "
+				"(Power=%02x, DevCtl=%02x)\n",
+			(musb->is_multipoint ? "M" : ""), MUSB_MODE(musb),
+			musb_readb(mbase, MUSB_POWER),
+			musb_readb(mbase, MUSB_DEVCTL));
+	if (count <= 0)
+		return 0;
+	buffer += count;
+
+	code = sprintf(buffer, "OTG state: %s; %sactive\n",
+			otg_state_string(musb),
+			musb->is_active ? "" : "in");
+	if (code <= 0)
+		goto done;
+	buffer += code;
+	count += code;
+
+	code = sprintf(buffer,
+			"Options: "
+#ifdef CONFIG_MUSB_PIO_ONLY
+			"pio"
+#elif defined(CONFIG_USB_TI_CPPI_DMA)
+			"cppi-dma"
+#elif defined(CONFIG_USB_INVENTRA_DMA)
+			"musb-dma"
+#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
+			"tusb-omap-dma"
+#else
+			"?dma?"
+#endif
+			", "
+#ifdef CONFIG_USB_MUSB_OTG
+			"otg (peripheral+host)"
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+			"peripheral"
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+			"host"
+#endif
+			", debug=%d [eps=%d]\n",
+		debug,
+		musb->nr_endpoints);
+	if (code <= 0)
+		goto done;
+	count += code;
+	buffer += code;
+
+#ifdef	CONFIG_USB_GADGET_MUSB_HDRC
+	code = sprintf(buffer, "Peripheral address: %02x\n",
+			musb_readb(musb->ctrl_base, MUSB_FADDR));
+	if (code <= 0)
+		goto done;
+	buffer += code;
+	count += code;
+#endif
+
+#ifdef	CONFIG_USB_MUSB_HDRC_HCD
+	code = sprintf(buffer, "Root port status: %08x\n",
+			musb->port1_status);
+	if (code <= 0)
+		goto done;
+	buffer += code;
+	count += code;
+#endif
+
+#ifdef	CONFIG_ARCH_DAVINCI
+	code = sprintf(buffer,
+			"DaVinci: ctrl=%02x stat=%1x phy=%03x\n"
+			"\trndis=%05x auto=%04x intsrc=%08x intmsk=%08x"
+			"\n",
+			musb_readl(musb->ctrl_base, DAVINCI_USB_CTRL_REG),
+			musb_readl(musb->ctrl_base, DAVINCI_USB_STAT_REG),
+			__raw_readl((void __force __iomem *)
+					IO_ADDRESS(USBPHY_CTL_PADDR)),
+			musb_readl(musb->ctrl_base, DAVINCI_RNDIS_REG),
+			musb_readl(musb->ctrl_base, DAVINCI_AUTOREQ_REG),
+			musb_readl(musb->ctrl_base,
+					DAVINCI_USB_INT_SOURCE_REG),
+			musb_readl(musb->ctrl_base,
+					DAVINCI_USB_INT_MASK_REG));
+	if (code <= 0)
+		goto done;
+	count += code;
+	buffer += code;
+#endif	/* DAVINCI */
+
+#ifdef CONFIG_USB_TUSB6010
+	code = sprintf(buffer,
+			"TUSB6010: devconf %08x, phy enable %08x drive %08x"
+			"\n\totg %03x timer %08x"
+			"\n\tprcm conf %08x mgmt %08x; int src %08x mask %08x"
+			"\n",
+			musb_readl(musb->ctrl_base, TUSB_DEV_CONF),
+			musb_readl(musb->ctrl_base, TUSB_PHY_OTG_CTRL_ENABLE),
+			musb_readl(musb->ctrl_base, TUSB_PHY_OTG_CTRL),
+			musb_readl(musb->ctrl_base, TUSB_DEV_OTG_STAT),
+			musb_readl(musb->ctrl_base, TUSB_DEV_OTG_TIMER),
+			musb_readl(musb->ctrl_base, TUSB_PRCM_CONF),
+			musb_readl(musb->ctrl_base, TUSB_PRCM_MNGMT),
+			musb_readl(musb->ctrl_base, TUSB_INT_SRC),
+			musb_readl(musb->ctrl_base, TUSB_INT_MASK));
+	if (code <= 0)
+		goto done;
+	count += code;
+	buffer += code;
+#endif	/* DAVINCI */
+
+	if (is_cppi_enabled() && musb->dma_controller) {
+		code = sprintf(buffer,
+				"CPPI: txcr=%d txsrc=%01x txena=%01x; "
+				"rxcr=%d rxsrc=%01x rxena=%01x "
+				"\n",
+				musb_readl(musb->ctrl_base,
+						DAVINCI_TXCPPI_CTRL_REG),
+				musb_readl(musb->ctrl_base,
+						DAVINCI_TXCPPI_RAW_REG),
+				musb_readl(musb->ctrl_base,
+						DAVINCI_TXCPPI_INTENAB_REG),
+				musb_readl(musb->ctrl_base,
+						DAVINCI_RXCPPI_CTRL_REG),
+				musb_readl(musb->ctrl_base,
+						DAVINCI_RXCPPI_RAW_REG),
+				musb_readl(musb->ctrl_base,
+						DAVINCI_RXCPPI_INTENAB_REG));
+		if (code <= 0)
+			goto done;
+		count += code;
+		buffer += code;
+	}
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	if (is_peripheral_enabled(musb)) {
+		code = sprintf(buffer, "Gadget driver: %s\n",
+				musb->gadget_driver
+					? musb->gadget_driver->driver.name
+					: "(none)");
+		if (code <= 0)
+			goto done;
+		count += code;
+		buffer += code;
+	}
+#endif
+
+done:
+	return count;
+}
+
+/* Write to ProcFS
+ *
+ * C soft-connect
+ * c soft-disconnect
+ * I enable HS
+ * i disable HS
+ * s stop session
+ * F force session (OTG-unfriendly)
+ * E rElinquish bus (OTG)
+ * H request host mode
+ * h cancel host request
+ * T start sending TEST_PACKET
+ * D<num> set/query the debug level
+ */
+static int musb_proc_write(struct file *file, const char __user *buffer,
+			unsigned long count, void *data)
+{
+	char cmd;
+	u8 reg;
+	struct musb *musb = (struct musb *)data;
+	void __iomem *mbase = musb->mregs;
+
+	/* MOD_INC_USE_COUNT; */
+
+	if (unlikely(copy_from_user(&cmd, buffer, 1)))
+		return -EFAULT;
+
+	switch (cmd) {
+	case 'C':
+		if (mbase) {
+			reg = musb_readb(mbase, MUSB_POWER)
+					| MUSB_POWER_SOFTCONN;
+			musb_writeb(mbase, MUSB_POWER, reg);
+		}
+		break;
+
+	case 'c':
+		if (mbase) {
+			reg = musb_readb(mbase, MUSB_POWER)
+					& ~MUSB_POWER_SOFTCONN;
+			musb_writeb(mbase, MUSB_POWER, reg);
+		}
+		break;
+
+	case 'I':
+		if (mbase) {
+			reg = musb_readb(mbase, MUSB_POWER)
+					| MUSB_POWER_HSENAB;
+			musb_writeb(mbase, MUSB_POWER, reg);
+		}
+		break;
+
+	case 'i':
+		if (mbase) {
+			reg = musb_readb(mbase, MUSB_POWER)
+					& ~MUSB_POWER_HSENAB;
+			musb_writeb(mbase, MUSB_POWER, reg);
+		}
+		break;
+
+	case 'F':
+		reg = musb_readb(mbase, MUSB_DEVCTL);
+		reg |= MUSB_DEVCTL_SESSION;
+		musb_writeb(mbase, MUSB_DEVCTL, reg);
+		break;
+
+	case 'H':
+		if (mbase) {
+			reg = musb_readb(mbase, MUSB_DEVCTL);
+			reg |= MUSB_DEVCTL_HR;
+			musb_writeb(mbase, MUSB_DEVCTL, reg);
+			/* MUSB_HST_MODE( ((struct musb*)data) ); */
+			/* WARNING("Host Mode\n"); */
+		}
+		break;
+
+	case 'h':
+		if (mbase) {
+			reg = musb_readb(mbase, MUSB_DEVCTL);
+			reg &= ~MUSB_DEVCTL_HR;
+			musb_writeb(mbase, MUSB_DEVCTL, reg);
+		}
+		break;
+
+	case 'T':
+		if (mbase) {
+			musb_load_testpacket(musb);
+			musb_writeb(mbase, MUSB_TESTMODE,
+					MUSB_TEST_PACKET);
+		}
+		break;
+
+#if (MUSB_DEBUG > 0)
+		/* set/read debug level */
+	case 'D':{
+			if (count > 1) {
+				char digits[8], *p = digits;
+				int i = 0, level = 0, sign = 1;
+				int len = min(count - 1, (unsigned long)8);
+
+				if (copy_from_user(&digits, &buffer[1], len))
+					return -EFAULT;
+
+				/* optional sign */
+				if (*p == '-') {
+					len -= 1;
+					sign = -sign;
+					p++;
+				}
+
+				/* read it */
+				while (i++ < len && *p > '0' && *p < '9') {
+					level = level * 10 + (*p - '0');
+					p++;
+				}
+
+				level *= sign;
+				DBG(1, "debug level %d\n", level);
+				debug = level;
+			}
+		}
+		break;
+
+
+	case '?':
+		INFO("?: you are seeing it\n");
+		INFO("C/c: soft connect enable/disable\n");
+		INFO("I/i: hispeed enable/disable\n");
+		INFO("F: force session start\n");
+		INFO("H: host mode\n");
+		INFO("T: start sending TEST_PACKET\n");
+		INFO("D: set/read dbug level\n");
+		break;
+#endif
+
+	default:
+		ERR("Command %c not implemented\n", cmd);
+		break;
+	}
+
+	musb_platform_try_idle(musb, 0);
+
+	return count;
+}
+
+static int musb_proc_read(char *page, char **start,
+			off_t off, int count, int *eof, void *data)
+{
+	char *buffer = page;
+	int code = 0;
+	unsigned long	flags;
+	struct musb	*musb = data;
+	unsigned	epnum;
+
+	count -= off;
+	count -= 1;		/* for NUL at end */
+	if (count <= 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	code = dump_header_stats(musb, buffer);
+	if (code > 0) {
+		buffer += code;
+		count -= code;
+	}
+
+	/* generate the report for the end points */
+	/* REVISIT ... not unless something's connected! */
+	for (epnum = 0; count >= 0 && epnum < musb->nr_endpoints;
+			epnum++) {
+		code = dump_end_info(musb, epnum, buffer, count);
+		if (code > 0) {
+			buffer += code;
+			count -= code;
+		}
+	}
+
+	musb_platform_try_idle(musb, 0);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+	*eof = 1;
+
+	return buffer - page;
+}
+
+void __devexit musb_debug_delete(char *name, struct musb *musb)
+{
+	if (musb->proc_entry)
+		remove_proc_entry(name, NULL);
+}
+
+struct proc_dir_entry *__init
+musb_debug_create(char *name, struct musb *data)
+{
+	struct proc_dir_entry	*pde;
+
+	/* FIXME convert everything to seq_file; then later, debugfs */
+
+	if (!name)
+		return NULL;
+
+	pde = create_proc_entry(name, S_IFREG | S_IRUGO | S_IWUSR, NULL);
+	data->proc_entry = pde;
+	if (pde) {
+		pde->data = data;
+		/* pde->owner = THIS_MODULE; */
+
+		pde->read_proc = musb_proc_read;
+		pde->write_proc = musb_proc_write;
+
+		pde->size = 0;
+
+		pr_debug("Registered /proc/%s\n", name);
+	} else {
+		pr_debug("Cannot create a valid proc file entry");
+	}
+
+	return pde;
+}
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
new file mode 100644
index 000000000000..9c228661aa5a
--- /dev/null
+++ b/drivers/usb/musb/musb_regs.h
@@ -0,0 +1,300 @@
+/*
+ * MUSB OTG driver register defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_REGS_H__
+#define __MUSB_REGS_H__
+
+#define MUSB_EP0_FIFOSIZE	64	/* This is non-configurable */
+
+/*
+ * Common USB registers
+ */
+
+#define MUSB_FADDR		0x00	/* 8-bit */
+#define MUSB_POWER		0x01	/* 8-bit */
+
+#define MUSB_INTRTX		0x02	/* 16-bit */
+#define MUSB_INTRRX		0x04
+#define MUSB_INTRTXE		0x06
+#define MUSB_INTRRXE		0x08
+#define MUSB_INTRUSB		0x0A	/* 8 bit */
+#define MUSB_INTRUSBE		0x0B	/* 8 bit */
+#define MUSB_FRAME		0x0C
+#define MUSB_INDEX		0x0E	/* 8 bit */
+#define MUSB_TESTMODE		0x0F	/* 8 bit */
+
+/* Get offset for a given FIFO from musb->mregs */
+#ifdef	CONFIG_USB_TUSB6010
+#define MUSB_FIFO_OFFSET(epnum)	(0x200 + ((epnum) * 0x20))
+#else
+#define MUSB_FIFO_OFFSET(epnum)	(0x20 + ((epnum) * 4))
+#endif
+
+/*
+ * Additional Control Registers
+ */
+
+#define MUSB_DEVCTL		0x60	/* 8 bit */
+
+/* These are always controlled through the INDEX register */
+#define MUSB_TXFIFOSZ		0x62	/* 8-bit (see masks) */
+#define MUSB_RXFIFOSZ		0x63	/* 8-bit (see masks) */
+#define MUSB_TXFIFOADD		0x64	/* 16-bit offset shifted right 3 */
+#define MUSB_RXFIFOADD		0x66	/* 16-bit offset shifted right 3 */
+
+/* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
+#define MUSB_HWVERS		0x6C	/* 8 bit */
+
+#define MUSB_EPINFO		0x78	/* 8 bit */
+#define MUSB_RAMINFO		0x79	/* 8 bit */
+#define MUSB_LINKINFO		0x7a	/* 8 bit */
+#define MUSB_VPLEN		0x7b	/* 8 bit */
+#define MUSB_HS_EOF1		0x7c	/* 8 bit */
+#define MUSB_FS_EOF1		0x7d	/* 8 bit */
+#define MUSB_LS_EOF1		0x7e	/* 8 bit */
+
+/* Offsets to endpoint registers */
+#define MUSB_TXMAXP		0x00
+#define MUSB_TXCSR		0x02
+#define MUSB_CSR0		MUSB_TXCSR	/* Re-used for EP0 */
+#define MUSB_RXMAXP		0x04
+#define MUSB_RXCSR		0x06
+#define MUSB_RXCOUNT		0x08
+#define MUSB_COUNT0		MUSB_RXCOUNT	/* Re-used for EP0 */
+#define MUSB_TXTYPE		0x0A
+#define MUSB_TYPE0		MUSB_TXTYPE	/* Re-used for EP0 */
+#define MUSB_TXINTERVAL		0x0B
+#define MUSB_NAKLIMIT0		MUSB_TXINTERVAL	/* Re-used for EP0 */
+#define MUSB_RXTYPE		0x0C
+#define MUSB_RXINTERVAL		0x0D
+#define MUSB_FIFOSIZE		0x0F
+#define MUSB_CONFIGDATA		MUSB_FIFOSIZE	/* Re-used for EP0 */
+
+/* Offsets to endpoint registers in indexed model (using INDEX register) */
+#define MUSB_INDEXED_OFFSET(_epnum, _offset)	\
+	(0x10 + (_offset))
+
+/* Offsets to endpoint registers in flat models */
+#define MUSB_FLAT_OFFSET(_epnum, _offset)	\
+	(0x100 + (0x10*(_epnum)) + (_offset))
+
+#ifdef CONFIG_USB_TUSB6010
+/* TUSB6010 EP0 configuration register is special */
+#define MUSB_TUSB_OFFSET(_epnum, _offset)	\
+	(0x10 + _offset)
+#include "tusb6010.h"		/* Needed "only" for TUSB_EP0_CONF */
+#endif
+
+/* "bus control"/target registers, for host side multipoint (external hubs) */
+#define MUSB_TXFUNCADDR		0x00
+#define MUSB_TXHUBADDR		0x02
+#define MUSB_TXHUBPORT		0x03
+
+#define MUSB_RXFUNCADDR		0x04
+#define MUSB_RXHUBADDR		0x06
+#define MUSB_RXHUBPORT		0x07
+
+#define MUSB_BUSCTL_OFFSET(_epnum, _offset) \
+	(0x80 + (8*(_epnum)) + (_offset))
+
+/*
+ * MUSB Register bits
+ */
+
+/* POWER */
+#define MUSB_POWER_ISOUPDATE	0x80
+#define MUSB_POWER_SOFTCONN	0x40
+#define MUSB_POWER_HSENAB	0x20
+#define MUSB_POWER_HSMODE	0x10
+#define MUSB_POWER_RESET	0x08
+#define MUSB_POWER_RESUME	0x04
+#define MUSB_POWER_SUSPENDM	0x02
+#define MUSB_POWER_ENSUSPEND	0x01
+
+/* INTRUSB */
+#define MUSB_INTR_SUSPEND	0x01
+#define MUSB_INTR_RESUME	0x02
+#define MUSB_INTR_RESET		0x04
+#define MUSB_INTR_BABBLE	0x04
+#define MUSB_INTR_SOF		0x08
+#define MUSB_INTR_CONNECT	0x10
+#define MUSB_INTR_DISCONNECT	0x20
+#define MUSB_INTR_SESSREQ	0x40
+#define MUSB_INTR_VBUSERROR	0x80	/* For SESSION end */
+
+/* DEVCTL */
+#define MUSB_DEVCTL_BDEVICE	0x80
+#define MUSB_DEVCTL_FSDEV	0x40
+#define MUSB_DEVCTL_LSDEV	0x20
+#define MUSB_DEVCTL_VBUS	0x18
+#define MUSB_DEVCTL_VBUS_SHIFT	3
+#define MUSB_DEVCTL_HM		0x04
+#define MUSB_DEVCTL_HR		0x02
+#define MUSB_DEVCTL_SESSION	0x01
+
+/* TESTMODE */
+#define MUSB_TEST_FORCE_HOST	0x80
+#define MUSB_TEST_FIFO_ACCESS	0x40
+#define MUSB_TEST_FORCE_FS	0x20
+#define MUSB_TEST_FORCE_HS	0x10
+#define MUSB_TEST_PACKET	0x08
+#define MUSB_TEST_K		0x04
+#define MUSB_TEST_J		0x02
+#define MUSB_TEST_SE0_NAK	0x01
+
+/* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
+#define MUSB_FIFOSZ_DPB	0x10
+/* Allocation size (8, 16, 32, ... 4096) */
+#define MUSB_FIFOSZ_SIZE	0x0f
+
+/* CSR0 */
+#define MUSB_CSR0_FLUSHFIFO	0x0100
+#define MUSB_CSR0_TXPKTRDY	0x0002
+#define MUSB_CSR0_RXPKTRDY	0x0001
+
+/* CSR0 in Peripheral mode */
+#define MUSB_CSR0_P_SVDSETUPEND	0x0080
+#define MUSB_CSR0_P_SVDRXPKTRDY	0x0040
+#define MUSB_CSR0_P_SENDSTALL	0x0020
+#define MUSB_CSR0_P_SETUPEND	0x0010
+#define MUSB_CSR0_P_DATAEND	0x0008
+#define MUSB_CSR0_P_SENTSTALL	0x0004
+
+/* CSR0 in Host mode */
+#define MUSB_CSR0_H_DIS_PING		0x0800
+#define MUSB_CSR0_H_WR_DATATOGGLE	0x0400	/* Set to allow setting: */
+#define MUSB_CSR0_H_DATATOGGLE		0x0200	/* Data toggle control */
+#define MUSB_CSR0_H_NAKTIMEOUT		0x0080
+#define MUSB_CSR0_H_STATUSPKT		0x0040
+#define MUSB_CSR0_H_REQPKT		0x0020
+#define MUSB_CSR0_H_ERROR		0x0010
+#define MUSB_CSR0_H_SETUPPKT		0x0008
+#define MUSB_CSR0_H_RXSTALL		0x0004
+
+/* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_CSR0_P_WZC_BITS	\
+	(MUSB_CSR0_P_SENTSTALL)
+#define MUSB_CSR0_H_WZC_BITS	\
+	(MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
+	| MUSB_CSR0_RXPKTRDY)
+
+/* TxType/RxType */
+#define MUSB_TYPE_SPEED		0xc0
+#define MUSB_TYPE_SPEED_SHIFT	6
+#define MUSB_TYPE_PROTO		0x30	/* Implicitly zero for ep0 */
+#define MUSB_TYPE_PROTO_SHIFT	4
+#define MUSB_TYPE_REMOTE_END	0xf	/* Implicitly zero for ep0 */
+
+/* CONFIGDATA */
+#define MUSB_CONFIGDATA_MPRXE		0x80	/* Auto bulk pkt combining */
+#define MUSB_CONFIGDATA_MPTXE		0x40	/* Auto bulk pkt splitting */
+#define MUSB_CONFIGDATA_BIGENDIAN	0x20
+#define MUSB_CONFIGDATA_HBRXE		0x10	/* HB-ISO for RX */
+#define MUSB_CONFIGDATA_HBTXE		0x08	/* HB-ISO for TX */
+#define MUSB_CONFIGDATA_DYNFIFO		0x04	/* Dynamic FIFO sizing */
+#define MUSB_CONFIGDATA_SOFTCONE	0x02	/* SoftConnect */
+#define MUSB_CONFIGDATA_UTMIDW		0x01	/* Data width 0/1 => 8/16bits */
+
+/* TXCSR in Peripheral and Host mode */
+#define MUSB_TXCSR_AUTOSET		0x8000
+#define MUSB_TXCSR_MODE			0x2000
+#define MUSB_TXCSR_DMAENAB		0x1000
+#define MUSB_TXCSR_FRCDATATOG		0x0800
+#define MUSB_TXCSR_DMAMODE		0x0400
+#define MUSB_TXCSR_CLRDATATOG		0x0040
+#define MUSB_TXCSR_FLUSHFIFO		0x0008
+#define MUSB_TXCSR_FIFONOTEMPTY		0x0002
+#define MUSB_TXCSR_TXPKTRDY		0x0001
+
+/* TXCSR in Peripheral mode */
+#define MUSB_TXCSR_P_ISO		0x4000
+#define MUSB_TXCSR_P_INCOMPTX		0x0080
+#define MUSB_TXCSR_P_SENTSTALL		0x0020
+#define MUSB_TXCSR_P_SENDSTALL		0x0010
+#define MUSB_TXCSR_P_UNDERRUN		0x0004
+
+/* TXCSR in Host mode */
+#define MUSB_TXCSR_H_WR_DATATOGGLE	0x0200
+#define MUSB_TXCSR_H_DATATOGGLE		0x0100
+#define MUSB_TXCSR_H_NAKTIMEOUT		0x0080
+#define MUSB_TXCSR_H_RXSTALL		0x0020
+#define MUSB_TXCSR_H_ERROR		0x0004
+
+/* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_TXCSR_P_WZC_BITS	\
+	(MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
+	| MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
+#define MUSB_TXCSR_H_WZC_BITS	\
+	(MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
+	| MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
+
+/* RXCSR in Peripheral and Host mode */
+#define MUSB_RXCSR_AUTOCLEAR		0x8000
+#define MUSB_RXCSR_DMAENAB		0x2000
+#define MUSB_RXCSR_DISNYET		0x1000
+#define MUSB_RXCSR_PID_ERR		0x1000
+#define MUSB_RXCSR_DMAMODE		0x0800
+#define MUSB_RXCSR_INCOMPRX		0x0100
+#define MUSB_RXCSR_CLRDATATOG		0x0080
+#define MUSB_RXCSR_FLUSHFIFO		0x0010
+#define MUSB_RXCSR_DATAERROR		0x0008
+#define MUSB_RXCSR_FIFOFULL		0x0002
+#define MUSB_RXCSR_RXPKTRDY		0x0001
+
+/* RXCSR in Peripheral mode */
+#define MUSB_RXCSR_P_ISO		0x4000
+#define MUSB_RXCSR_P_SENTSTALL		0x0040
+#define MUSB_RXCSR_P_SENDSTALL		0x0020
+#define MUSB_RXCSR_P_OVERRUN		0x0004
+
+/* RXCSR in Host mode */
+#define MUSB_RXCSR_H_AUTOREQ		0x4000
+#define MUSB_RXCSR_H_WR_DATATOGGLE	0x0400
+#define MUSB_RXCSR_H_DATATOGGLE		0x0200
+#define MUSB_RXCSR_H_RXSTALL		0x0040
+#define MUSB_RXCSR_H_REQPKT		0x0020
+#define MUSB_RXCSR_H_ERROR		0x0004
+
+/* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_RXCSR_P_WZC_BITS	\
+	(MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
+	| MUSB_RXCSR_RXPKTRDY)
+#define MUSB_RXCSR_H_WZC_BITS	\
+	(MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
+	| MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)
+
+/* HUBADDR */
+#define MUSB_HUBADDR_MULTI_TT		0x80
+
+#endif	/* __MUSB_REGS_H__ */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
new file mode 100644
index 000000000000..e0e9ce584175
--- /dev/null
+++ b/drivers/usb/musb/musb_virthub.c
@@ -0,0 +1,425 @@
+/*
+ * MUSB OTG driver virtual root hub support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+
+#include <asm/unaligned.h>
+
+#include "musb_core.h"
+
+
+static void musb_port_suspend(struct musb *musb, bool do_suspend)
+{
+	u8		power;
+	void __iomem	*mbase = musb->mregs;
+
+	if (!is_host_active(musb))
+		return;
+
+	/* NOTE:  this doesn't necessarily put PHY into low power mode,
+	 * turning off its clock; that's a function of PHY integration and
+	 * MUSB_POWER_ENSUSPEND.  PHY may need a clock (sigh) to detect
+	 * SE0 changing to connect (J) or wakeup (K) states.
+	 */
+	power = musb_readb(mbase, MUSB_POWER);
+	if (do_suspend) {
+		int retries = 10000;
+
+		power &= ~MUSB_POWER_RESUME;
+		power |= MUSB_POWER_SUSPENDM;
+		musb_writeb(mbase, MUSB_POWER, power);
+
+		/* Needed for OPT A tests */
+		power = musb_readb(mbase, MUSB_POWER);
+		while (power & MUSB_POWER_SUSPENDM) {
+			power = musb_readb(mbase, MUSB_POWER);
+			if (retries-- < 1)
+				break;
+		}
+
+		DBG(3, "Root port suspended, power %02x\n", power);
+
+		musb->port1_status |= USB_PORT_STAT_SUSPEND;
+		switch (musb->xceiv.state) {
+		case OTG_STATE_A_HOST:
+			musb->xceiv.state = OTG_STATE_A_SUSPEND;
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv.host->b_hnp_enable;
+			musb_platform_try_idle(musb, 0);
+			break;
+#ifdef	CONFIG_USB_MUSB_OTG
+		case OTG_STATE_B_HOST:
+			musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv.host->b_hnp_enable;
+			musb_platform_try_idle(musb, 0);
+			break;
+#endif
+		default:
+			DBG(1, "bogus rh suspend? %s\n",
+				otg_state_string(musb));
+		}
+	} else if (power & MUSB_POWER_SUSPENDM) {
+		power &= ~MUSB_POWER_SUSPENDM;
+		power |= MUSB_POWER_RESUME;
+		musb_writeb(mbase, MUSB_POWER, power);
+
+		DBG(3, "Root port resuming, power %02x\n", power);
+
+		/* later, GetPortStatus will stop RESUME signaling */
+		musb->port1_status |= MUSB_PORT_STAT_RESUME;
+		musb->rh_timer = jiffies + msecs_to_jiffies(20);
+	}
+}
+
+static void musb_port_reset(struct musb *musb, bool do_reset)
+{
+	u8		power;
+	void __iomem	*mbase = musb->mregs;
+
+#ifdef CONFIG_USB_MUSB_OTG
+	if (musb->xceiv.state == OTG_STATE_B_IDLE) {
+		DBG(2, "HNP: Returning from HNP; no hub reset from b_idle\n");
+		musb->port1_status &= ~USB_PORT_STAT_RESET;
+		return;
+	}
+#endif
+
+	if (!is_host_active(musb))
+		return;
+
+	/* NOTE:  caller guarantees it will turn off the reset when
+	 * the appropriate amount of time has passed
+	 */
+	power = musb_readb(mbase, MUSB_POWER);
+	if (do_reset) {
+
+		/*
+		 * If RESUME is set, we must make sure it stays minimum 20 ms.
+		 * Then we must clear RESUME and wait a bit to let musb start
+		 * generating SOFs. If we don't do this, OPT HS A 6.8 tests
+		 * fail with "Error! Did not receive an SOF before suspend
+		 * detected".
+		 */
+		if (power &  MUSB_POWER_RESUME) {
+			while (time_before(jiffies, musb->rh_timer))
+				msleep(1);
+			musb_writeb(mbase, MUSB_POWER,
+				power & ~MUSB_POWER_RESUME);
+			msleep(1);
+		}
+
+		musb->ignore_disconnect = true;
+		power &= 0xf0;
+		musb_writeb(mbase, MUSB_POWER,
+				power | MUSB_POWER_RESET);
+
+		musb->port1_status |= USB_PORT_STAT_RESET;
+		musb->port1_status &= ~USB_PORT_STAT_ENABLE;
+		musb->rh_timer = jiffies + msecs_to_jiffies(50);
+	} else {
+		DBG(4, "root port reset stopped\n");
+		musb_writeb(mbase, MUSB_POWER,
+				power & ~MUSB_POWER_RESET);
+
+		musb->ignore_disconnect = false;
+
+		power = musb_readb(mbase, MUSB_POWER);
+		if (power & MUSB_POWER_HSMODE) {
+			DBG(4, "high-speed device connected\n");
+			musb->port1_status |= USB_PORT_STAT_HIGH_SPEED;
+		}
+
+		musb->port1_status &= ~USB_PORT_STAT_RESET;
+		musb->port1_status |= USB_PORT_STAT_ENABLE
+					| (USB_PORT_STAT_C_RESET << 16)
+					| (USB_PORT_STAT_C_ENABLE << 16);
+		usb_hcd_poll_rh_status(musb_to_hcd(musb));
+
+		musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+	}
+}
+
+void musb_root_disconnect(struct musb *musb)
+{
+	musb->port1_status = (1 << USB_PORT_FEAT_POWER)
+			| (1 << USB_PORT_FEAT_C_CONNECTION);
+
+	usb_hcd_poll_rh_status(musb_to_hcd(musb));
+	musb->is_active = 0;
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_HOST:
+	case OTG_STATE_A_SUSPEND:
+		musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+		musb->is_active = 0;
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+		break;
+	default:
+		DBG(1, "host disconnect (%s)\n", otg_state_string(musb));
+	}
+}
+
+
+/*---------------------------------------------------------------------*/
+
+/* Caller may or may not hold musb->lock */
+int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+	int		retval = 0;
+
+	/* called in_irq() via usb_hcd_poll_rh_status() */
+	if (musb->port1_status & 0xffff0000) {
+		*buf = 0x02;
+		retval = 1;
+	}
+	return retval;
+}
+
+int musb_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+	u32		temp;
+	int		retval = 0;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+		spin_unlock_irqrestore(&musb->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	/* hub features:  always zero, setting is a NOP
+	 * port features: reported, sometimes updated when host is active
+	 * no indicators
+	 */
+	switch (typeReq) {
+	case ClearHubFeature:
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if ((wIndex & 0xff) != 1)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			musb_port_suspend(musb, false);
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
+				musb_set_vbus(musb, 0);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+		case USB_PORT_FEAT_C_RESET:
+		case USB_PORT_FEAT_C_SUSPEND:
+			break;
+		default:
+			goto error;
+		}
+		DBG(5, "clear feature %d\n", wValue);
+		musb->port1_status &= ~(1 << wValue);
+		break;
+	case GetHubDescriptor:
+		{
+		struct usb_hub_descriptor *desc = (void *)buf;
+
+		desc->bDescLength = 9;
+		desc->bDescriptorType = 0x29;
+		desc->bNbrPorts = 1;
+		desc->wHubCharacteristics = __constant_cpu_to_le16(
+				  0x0001	/* per-port power switching */
+				| 0x0010	/* no overcurrent reporting */
+				);
+		desc->bPwrOn2PwrGood = 5;	/* msec/2 */
+		desc->bHubContrCurrent = 0;
+
+		/* workaround bogus struct definition */
+		desc->DeviceRemovable[0] = 0x02;	/* port 1 */
+		desc->DeviceRemovable[1] = 0xff;
+		}
+		break;
+	case GetHubStatus:
+		temp = 0;
+		*(__le32 *) buf = cpu_to_le32(temp);
+		break;
+	case GetPortStatus:
+		if (wIndex != 1)
+			goto error;
+
+		/* finish RESET signaling? */
+		if ((musb->port1_status & USB_PORT_STAT_RESET)
+				&& time_after_eq(jiffies, musb->rh_timer))
+			musb_port_reset(musb, false);
+
+		/* finish RESUME signaling? */
+		if ((musb->port1_status & MUSB_PORT_STAT_RESUME)
+				&& time_after_eq(jiffies, musb->rh_timer)) {
+			u8		power;
+
+			power = musb_readb(musb->mregs, MUSB_POWER);
+			power &= ~MUSB_POWER_RESUME;
+			DBG(4, "root port resume stopped, power %02x\n",
+					power);
+			musb_writeb(musb->mregs, MUSB_POWER, power);
+
+			/* ISSUE:  DaVinci (RTL 1.300) disconnects after
+			 * resume of high speed peripherals (but not full
+			 * speed ones).
+			 */
+
+			musb->is_active = 1;
+			musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
+					| MUSB_PORT_STAT_RESUME);
+			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+			usb_hcd_poll_rh_status(musb_to_hcd(musb));
+			/* NOTE: it might really be A_WAIT_BCON ... */
+			musb->xceiv.state = OTG_STATE_A_HOST;
+		}
+
+		put_unaligned(cpu_to_le32(musb->port1_status
+					& ~MUSB_PORT_STAT_RESUME),
+				(__le32 *) buf);
+
+		/* port change status is more interesting */
+		DBG(get_unaligned((u16 *)(buf+2)) ? 2 : 5, "port status %08x\n",
+				musb->port1_status);
+		break;
+	case SetPortFeature:
+		if ((wIndex & 0xff) != 1)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_POWER:
+			/* NOTE: this controller has a strange state machine
+			 * that involves "requesting sessions" according to
+			 * magic side effects from incompletely-described
+			 * rules about startup...
+			 *
+			 * This call is what really starts the host mode; be
+			 * very careful about side effects if you reorder any
+			 * initialization logic, e.g. for OTG, or change any
+			 * logic relating to VBUS power-up.
+			 */
+			if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
+				musb_start(musb);
+			break;
+		case USB_PORT_FEAT_RESET:
+			musb_port_reset(musb, true);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			musb_port_suspend(musb, true);
+			break;
+		case USB_PORT_FEAT_TEST:
+			if (unlikely(is_host_active(musb)))
+				goto error;
+
+			wIndex >>= 8;
+			switch (wIndex) {
+			case 1:
+				pr_debug("TEST_J\n");
+				temp = MUSB_TEST_J;
+				break;
+			case 2:
+				pr_debug("TEST_K\n");
+				temp = MUSB_TEST_K;
+				break;
+			case 3:
+				pr_debug("TEST_SE0_NAK\n");
+				temp = MUSB_TEST_SE0_NAK;
+				break;
+			case 4:
+				pr_debug("TEST_PACKET\n");
+				temp = MUSB_TEST_PACKET;
+				musb_load_testpacket(musb);
+				break;
+			case 5:
+				pr_debug("TEST_FORCE_ENABLE\n");
+				temp = MUSB_TEST_FORCE_HOST
+					| MUSB_TEST_FORCE_HS;
+
+				musb_writeb(musb->mregs, MUSB_DEVCTL,
+						MUSB_DEVCTL_SESSION);
+				break;
+			case 6:
+				pr_debug("TEST_FIFO_ACCESS\n");
+				temp = MUSB_TEST_FIFO_ACCESS;
+				break;
+			default:
+				goto error;
+			}
+			musb_writeb(musb->mregs, MUSB_TESTMODE, temp);
+			break;
+		default:
+			goto error;
+		}
+		DBG(5, "set feature %d\n", wValue);
+		musb->port1_status |= 1 << wValue;
+		break;
+
+	default:
+error:
+		/* "protocol stall" on error */
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return retval;
+}
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
new file mode 100644
index 000000000000..9ba8fb7fcd24
--- /dev/null
+++ b/drivers/usb/musb/musbhsdma.c
@@ -0,0 +1,433 @@
+/*
+ * MUSB OTG driver - support for Mentor's DMA controller
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2007 by Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include "musb_core.h"
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#include "omap2430.h"
+#endif
+
+#define MUSB_HSDMA_BASE		0x200
+#define MUSB_HSDMA_INTR		(MUSB_HSDMA_BASE + 0)
+#define MUSB_HSDMA_CONTROL		0x4
+#define MUSB_HSDMA_ADDRESS		0x8
+#define MUSB_HSDMA_COUNT		0xc
+
+#define MUSB_HSDMA_CHANNEL_OFFSET(_bChannel, _offset)		\
+		(MUSB_HSDMA_BASE + (_bChannel << 4) + _offset)
+
+/* control register (16-bit): */
+#define MUSB_HSDMA_ENABLE_SHIFT		0
+#define MUSB_HSDMA_TRANSMIT_SHIFT		1
+#define MUSB_HSDMA_MODE1_SHIFT		2
+#define MUSB_HSDMA_IRQENABLE_SHIFT		3
+#define MUSB_HSDMA_ENDPOINT_SHIFT		4
+#define MUSB_HSDMA_BUSERROR_SHIFT		8
+#define MUSB_HSDMA_BURSTMODE_SHIFT		9
+#define MUSB_HSDMA_BURSTMODE		(3 << MUSB_HSDMA_BURSTMODE_SHIFT)
+#define MUSB_HSDMA_BURSTMODE_UNSPEC	0
+#define MUSB_HSDMA_BURSTMODE_INCR4	1
+#define MUSB_HSDMA_BURSTMODE_INCR8	2
+#define MUSB_HSDMA_BURSTMODE_INCR16	3
+
+#define MUSB_HSDMA_CHANNELS		8
+
+struct musb_dma_controller;
+
+struct musb_dma_channel {
+	struct dma_channel		Channel;
+	struct musb_dma_controller	*controller;
+	u32				dwStartAddress;
+	u32				len;
+	u16				wMaxPacketSize;
+	u8				bIndex;
+	u8				epnum;
+	u8				transmit;
+};
+
+struct musb_dma_controller {
+	struct dma_controller		Controller;
+	struct musb_dma_channel		aChannel[MUSB_HSDMA_CHANNELS];
+	void				*pDmaPrivate;
+	void __iomem			*pCoreBase;
+	u8				bChannelCount;
+	u8				bmUsedChannels;
+	u8				irq;
+};
+
+static int dma_controller_start(struct dma_controller *c)
+{
+	/* nothing to do */
+	return 0;
+}
+
+static void dma_channel_release(struct dma_channel *pChannel);
+
+static int dma_controller_stop(struct dma_controller *c)
+{
+	struct musb_dma_controller *controller =
+		container_of(c, struct musb_dma_controller, Controller);
+	struct musb *musb = (struct musb *) controller->pDmaPrivate;
+	struct dma_channel *pChannel;
+	u8 bBit;
+
+	if (controller->bmUsedChannels != 0) {
+		dev_err(musb->controller,
+			"Stopping DMA controller while channel active\n");
+
+		for (bBit = 0; bBit < MUSB_HSDMA_CHANNELS; bBit++) {
+			if (controller->bmUsedChannels & (1 << bBit)) {
+				pChannel = &controller->aChannel[bBit].Channel;
+				dma_channel_release(pChannel);
+
+				if (!controller->bmUsedChannels)
+					break;
+			}
+		}
+	}
+	return 0;
+}
+
+static struct dma_channel *dma_channel_allocate(struct dma_controller *c,
+				struct musb_hw_ep *hw_ep, u8 transmit)
+{
+	u8 bBit;
+	struct dma_channel *pChannel = NULL;
+	struct musb_dma_channel *pImplChannel = NULL;
+	struct musb_dma_controller *controller =
+			container_of(c, struct musb_dma_controller, Controller);
+
+	for (bBit = 0; bBit < MUSB_HSDMA_CHANNELS; bBit++) {
+		if (!(controller->bmUsedChannels & (1 << bBit))) {
+			controller->bmUsedChannels |= (1 << bBit);
+			pImplChannel = &(controller->aChannel[bBit]);
+			pImplChannel->controller = controller;
+			pImplChannel->bIndex = bBit;
+			pImplChannel->epnum = hw_ep->epnum;
+			pImplChannel->transmit = transmit;
+			pChannel = &(pImplChannel->Channel);
+			pChannel->private_data = pImplChannel;
+			pChannel->status = MUSB_DMA_STATUS_FREE;
+			pChannel->max_len = 0x10000;
+			/* Tx => mode 1; Rx => mode 0 */
+			pChannel->desired_mode = transmit;
+			pChannel->actual_len = 0;
+			break;
+		}
+	}
+	return pChannel;
+}
+
+static void dma_channel_release(struct dma_channel *pChannel)
+{
+	struct musb_dma_channel *pImplChannel =
+		(struct musb_dma_channel *) pChannel->private_data;
+
+	pChannel->actual_len = 0;
+	pImplChannel->dwStartAddress = 0;
+	pImplChannel->len = 0;
+
+	pImplChannel->controller->bmUsedChannels &=
+		~(1 << pImplChannel->bIndex);
+
+	pChannel->status = MUSB_DMA_STATUS_UNKNOWN;
+}
+
+static void configure_channel(struct dma_channel *pChannel,
+				u16 packet_sz, u8 mode,
+				dma_addr_t dma_addr, u32 len)
+{
+	struct musb_dma_channel *pImplChannel =
+		(struct musb_dma_channel *) pChannel->private_data;
+	struct musb_dma_controller *controller = pImplChannel->controller;
+	void __iomem *mbase = controller->pCoreBase;
+	u8 bChannel = pImplChannel->bIndex;
+	u16 csr = 0;
+
+	DBG(4, "%p, pkt_sz %d, addr 0x%x, len %d, mode %d\n",
+			pChannel, packet_sz, dma_addr, len, mode);
+
+	if (mode) {
+		csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
+		BUG_ON(len < packet_sz);
+
+		if (packet_sz >= 64) {
+			csr |= MUSB_HSDMA_BURSTMODE_INCR16
+					<< MUSB_HSDMA_BURSTMODE_SHIFT;
+		} else if (packet_sz >= 32) {
+			csr |= MUSB_HSDMA_BURSTMODE_INCR8
+					<< MUSB_HSDMA_BURSTMODE_SHIFT;
+		} else if (packet_sz >= 16) {
+			csr |= MUSB_HSDMA_BURSTMODE_INCR4
+					<< MUSB_HSDMA_BURSTMODE_SHIFT;
+		}
+	}
+
+	csr |= (pImplChannel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
+		| (1 << MUSB_HSDMA_ENABLE_SHIFT)
+		| (1 << MUSB_HSDMA_IRQENABLE_SHIFT)
+		| (pImplChannel->transmit
+				? (1 << MUSB_HSDMA_TRANSMIT_SHIFT)
+				: 0);
+
+	/* address/count */
+	musb_writel(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_ADDRESS),
+		dma_addr);
+	musb_writel(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_COUNT),
+		len);
+
+	/* control (this should start things) */
+	musb_writew(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_CONTROL),
+		csr);
+}
+
+static int dma_channel_program(struct dma_channel *pChannel,
+				u16 packet_sz, u8 mode,
+				dma_addr_t dma_addr, u32 len)
+{
+	struct musb_dma_channel *pImplChannel =
+			(struct musb_dma_channel *) pChannel->private_data;
+
+	DBG(2, "ep%d-%s pkt_sz %d, dma_addr 0x%x length %d, mode %d\n",
+		pImplChannel->epnum,
+		pImplChannel->transmit ? "Tx" : "Rx",
+		packet_sz, dma_addr, len, mode);
+
+	BUG_ON(pChannel->status == MUSB_DMA_STATUS_UNKNOWN ||
+		pChannel->status == MUSB_DMA_STATUS_BUSY);
+
+	pChannel->actual_len = 0;
+	pImplChannel->dwStartAddress = dma_addr;
+	pImplChannel->len = len;
+	pImplChannel->wMaxPacketSize = packet_sz;
+	pChannel->status = MUSB_DMA_STATUS_BUSY;
+
+	if ((mode == 1) && (len >= packet_sz))
+		configure_channel(pChannel, packet_sz, 1, dma_addr, len);
+	else
+		configure_channel(pChannel, packet_sz, 0, dma_addr, len);
+
+	return true;
+}
+
+static int dma_channel_abort(struct dma_channel *pChannel)
+{
+	struct musb_dma_channel *pImplChannel =
+		(struct musb_dma_channel *) pChannel->private_data;
+	u8 bChannel = pImplChannel->bIndex;
+	void __iomem *mbase = pImplChannel->controller->pCoreBase;
+	u16 csr;
+
+	if (pChannel->status == MUSB_DMA_STATUS_BUSY) {
+		if (pImplChannel->transmit) {
+
+			csr = musb_readw(mbase,
+				MUSB_EP_OFFSET(pImplChannel->epnum,
+						MUSB_TXCSR));
+			csr &= ~(MUSB_TXCSR_AUTOSET |
+				 MUSB_TXCSR_DMAENAB |
+				 MUSB_TXCSR_DMAMODE);
+			musb_writew(mbase,
+				MUSB_EP_OFFSET(pImplChannel->epnum,
+						MUSB_TXCSR),
+				csr);
+		} else {
+			csr = musb_readw(mbase,
+				MUSB_EP_OFFSET(pImplChannel->epnum,
+						MUSB_RXCSR));
+			csr &= ~(MUSB_RXCSR_AUTOCLEAR |
+				 MUSB_RXCSR_DMAENAB |
+				 MUSB_RXCSR_DMAMODE);
+			musb_writew(mbase,
+				MUSB_EP_OFFSET(pImplChannel->epnum,
+						MUSB_RXCSR),
+				csr);
+		}
+
+		musb_writew(mbase,
+			MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_CONTROL),
+			0);
+		musb_writel(mbase,
+			MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_ADDRESS),
+			0);
+		musb_writel(mbase,
+			MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_COUNT),
+			0);
+
+		pChannel->status = MUSB_DMA_STATUS_FREE;
+	}
+	return 0;
+}
+
+static irqreturn_t dma_controller_irq(int irq, void *private_data)
+{
+	struct musb_dma_controller *controller =
+		(struct musb_dma_controller *)private_data;
+	struct musb_dma_channel *pImplChannel;
+	struct musb *musb = controller->pDmaPrivate;
+	void __iomem *mbase = controller->pCoreBase;
+	struct dma_channel *pChannel;
+	u8 bChannel;
+	u16 csr;
+	u32 dwAddress;
+	u8 int_hsdma;
+	irqreturn_t retval = IRQ_NONE;
+	unsigned long flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
+	if (!int_hsdma)
+		goto done;
+
+	for (bChannel = 0; bChannel < MUSB_HSDMA_CHANNELS; bChannel++) {
+		if (int_hsdma & (1 << bChannel)) {
+			pImplChannel = (struct musb_dma_channel *)
+					&(controller->aChannel[bChannel]);
+			pChannel = &pImplChannel->Channel;
+
+			csr = musb_readw(mbase,
+					MUSB_HSDMA_CHANNEL_OFFSET(bChannel,
+							MUSB_HSDMA_CONTROL));
+
+			if (csr & (1 << MUSB_HSDMA_BUSERROR_SHIFT))
+				pImplChannel->Channel.status =
+					MUSB_DMA_STATUS_BUS_ABORT;
+			else {
+				u8 devctl;
+
+				dwAddress = musb_readl(mbase,
+						MUSB_HSDMA_CHANNEL_OFFSET(
+							bChannel,
+							MUSB_HSDMA_ADDRESS));
+				pChannel->actual_len = dwAddress
+					- pImplChannel->dwStartAddress;
+
+				DBG(2, "ch %p, 0x%x -> 0x%x (%d / %d) %s\n",
+					pChannel, pImplChannel->dwStartAddress,
+					dwAddress, pChannel->actual_len,
+					pImplChannel->len,
+					(pChannel->actual_len
+						< pImplChannel->len) ?
+					"=> reconfig 0" : "=> complete");
+
+				devctl = musb_readb(mbase, MUSB_DEVCTL);
+
+				pChannel->status = MUSB_DMA_STATUS_FREE;
+
+				/* completed */
+				if ((devctl & MUSB_DEVCTL_HM)
+					&& (pImplChannel->transmit)
+					&& ((pChannel->desired_mode == 0)
+					    || (pChannel->actual_len &
+					    (pImplChannel->wMaxPacketSize - 1)))
+					 ) {
+					/* Send out the packet */
+					musb_ep_select(mbase,
+						pImplChannel->epnum);
+					musb_writew(mbase, MUSB_EP_OFFSET(
+							pImplChannel->epnum,
+							MUSB_TXCSR),
+						MUSB_TXCSR_TXPKTRDY);
+				} else
+					musb_dma_completion(
+						musb,
+						pImplChannel->epnum,
+						pImplChannel->transmit);
+			}
+		}
+	}
+	retval = IRQ_HANDLED;
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return retval;
+}
+
+void dma_controller_destroy(struct dma_controller *c)
+{
+	struct musb_dma_controller *controller;
+
+	controller = container_of(c, struct musb_dma_controller, Controller);
+	if (!controller)
+		return;
+
+	if (controller->irq)
+		free_irq(controller->irq, c);
+
+	kfree(controller);
+}
+
+struct dma_controller *__init
+dma_controller_create(struct musb *musb, void __iomem *pCoreBase)
+{
+	struct musb_dma_controller *controller;
+	struct device *dev = musb->controller;
+	struct platform_device *pdev = to_platform_device(dev);
+	int irq = platform_get_irq(pdev, 1);
+
+	if (irq == 0) {
+		dev_err(dev, "No DMA interrupt line!\n");
+		return NULL;
+	}
+
+	controller = kzalloc(sizeof(struct musb_dma_controller), GFP_KERNEL);
+	if (!controller)
+		return NULL;
+
+	controller->bChannelCount = MUSB_HSDMA_CHANNELS;
+	controller->pDmaPrivate = musb;
+	controller->pCoreBase = pCoreBase;
+
+	controller->Controller.start = dma_controller_start;
+	controller->Controller.stop = dma_controller_stop;
+	controller->Controller.channel_alloc = dma_channel_allocate;
+	controller->Controller.channel_release = dma_channel_release;
+	controller->Controller.channel_program = dma_channel_program;
+	controller->Controller.channel_abort = dma_channel_abort;
+
+	if (request_irq(irq, dma_controller_irq, IRQF_DISABLED,
+			musb->controller->bus_id, &controller->Controller)) {
+		dev_err(dev, "request_irq %d failed!\n", irq);
+		dma_controller_destroy(&controller->Controller);
+		return NULL;
+	}
+
+	controller->irq = irq;
+
+	return &controller->Controller;
+}
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
new file mode 100644
index 000000000000..298b22e6ad0d
--- /dev/null
+++ b/drivers/usb/musb/omap2430.c
@@ -0,0 +1,324 @@
+/*
+ * Copyright (C) 2005-2007 by Texas Instruments
+ * Some code has been taken from tusb6010.c
+ * Copyrights for that are attributable to:
+ * Copyright (C) 2006 Nokia Corporation
+ * Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+
+#include "musb_core.h"
+#include "omap2430.h"
+
+#ifdef CONFIG_ARCH_OMAP3430
+#define	get_cpu_rev()	2
+#endif
+
+#define MUSB_TIMEOUT_A_WAIT_BCON	1100
+
+static struct timer_list musb_idle_timer;
+
+static void musb_do_idle(unsigned long _musb)
+{
+	struct musb	*musb = (void *)_musb;
+	unsigned long	flags;
+	u8	power;
+	u8	devctl;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_WAIT_BCON:
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE) {
+			musb->xceiv.state = OTG_STATE_B_IDLE;
+			MUSB_DEV_MODE(musb);
+		} else {
+			musb->xceiv.state = OTG_STATE_A_IDLE;
+			MUSB_HST_MODE(musb);
+		}
+		break;
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	case OTG_STATE_A_SUSPEND:
+		/* finish RESUME signaling? */
+		if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
+			power = musb_readb(musb->mregs, MUSB_POWER);
+			power &= ~MUSB_POWER_RESUME;
+			DBG(1, "root port resume stopped, power %02x\n", power);
+			musb_writeb(musb->mregs, MUSB_POWER, power);
+			musb->is_active = 1;
+			musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
+						| MUSB_PORT_STAT_RESUME);
+			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+			usb_hcd_poll_rh_status(musb_to_hcd(musb));
+			/* NOTE: it might really be A_WAIT_BCON ... */
+			musb->xceiv.state = OTG_STATE_A_HOST;
+		}
+		break;
+#endif
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	case OTG_STATE_A_HOST:
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if (devctl &  MUSB_DEVCTL_BDEVICE)
+			musb->xceiv.state = OTG_STATE_B_IDLE;
+		else
+			musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+#endif
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+
+void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+{
+	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
+	static unsigned long	last_timer;
+
+	if (timeout == 0)
+		timeout = default_timeout;
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || ((musb->a_wait_bcon == 0)
+			&& (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+		DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
+		del_timer(&musb_idle_timer);
+		last_timer = jiffies;
+		return;
+	}
+
+	if (time_after(last_timer, timeout)) {
+		if (!timer_pending(&musb_idle_timer))
+			last_timer = timeout;
+		else {
+			DBG(4, "Longer idle timer already pending, ignoring\n");
+			return;
+		}
+	}
+	last_timer = timeout;
+
+	DBG(4, "%s inactive, for idle timer for %lu ms\n",
+		otg_state_string(musb),
+		(unsigned long)jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&musb_idle_timer, timeout);
+}
+
+void musb_platform_enable(struct musb *musb)
+{
+}
+void musb_platform_disable(struct musb *musb)
+{
+}
+static void omap_vbus_power(struct musb *musb, int is_on, int sleeping)
+{
+}
+
+static void omap_set_vbus(struct musb *musb, int is_on)
+{
+	u8		devctl;
+	/* HDRC controls CPEN, but beware current surges during device
+	 * connect.  They can trigger transient overcurrent conditions
+	 * that must be ignored.
+	 */
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	if (is_on) {
+		musb->is_active = 1;
+		musb->xceiv.default_a = 1;
+		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		devctl |= MUSB_DEVCTL_SESSION;
+
+		MUSB_HST_MODE(musb);
+	} else {
+		musb->is_active = 0;
+
+		/* NOTE:  we're skipping A_WAIT_VFALL -> A_IDLE and
+		 * jumping right to B_IDLE...
+		 */
+
+		musb->xceiv.default_a = 0;
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+		devctl &= ~MUSB_DEVCTL_SESSION;
+
+		MUSB_DEV_MODE(musb);
+	}
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	DBG(1, "VBUS %s, devctl %02x "
+		/* otg %3x conf %08x prcm %08x */ "\n",
+		otg_state_string(musb),
+		musb_readb(musb->mregs, MUSB_DEVCTL));
+}
+static int omap_set_power(struct otg_transceiver *x, unsigned mA)
+{
+	return 0;
+}
+
+static int musb_platform_resume(struct musb *musb);
+
+void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+{
+	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	devctl |= MUSB_DEVCTL_SESSION;
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	switch (musb_mode) {
+	case MUSB_HOST:
+		otg_set_host(&musb->xceiv, musb->xceiv.host);
+		break;
+	case MUSB_PERIPHERAL:
+		otg_set_peripheral(&musb->xceiv, musb->xceiv.gadget);
+		break;
+	case MUSB_OTG:
+		break;
+	}
+}
+
+int __init musb_platform_init(struct musb *musb)
+{
+	u32 l;
+
+#if defined(CONFIG_ARCH_OMAP2430)
+	omap_cfg_reg(AE5_2430_USB0HS_STP);
+#endif
+
+	musb_platform_resume(musb);
+
+	l = omap_readl(OTG_SYSCONFIG);
+	l &= ~ENABLEWAKEUP;	/* disable wakeup */
+	l &= ~NOSTDBY;		/* remove possible nostdby */
+	l |= SMARTSTDBY;	/* enable smart standby */
+	l &= ~AUTOIDLE;		/* disable auto idle */
+	l &= ~NOIDLE;		/* remove possible noidle */
+	l |= SMARTIDLE;		/* enable smart idle */
+	l |= AUTOIDLE;		/* enable auto idle */
+	omap_writel(l, OTG_SYSCONFIG);
+
+	l = omap_readl(OTG_INTERFSEL);
+	l |= ULPI_12PIN;
+	omap_writel(l, OTG_INTERFSEL);
+
+	pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
+			"sysstatus 0x%x, intrfsel 0x%x, simenable  0x%x\n",
+			omap_readl(OTG_REVISION), omap_readl(OTG_SYSCONFIG),
+			omap_readl(OTG_SYSSTATUS), omap_readl(OTG_INTERFSEL),
+			omap_readl(OTG_SIMENABLE));
+
+	omap_vbus_power(musb, musb->board_mode == MUSB_HOST, 1);
+
+	if (is_host_enabled(musb))
+		musb->board_set_vbus = omap_set_vbus;
+	if (is_peripheral_enabled(musb))
+		musb->xceiv.set_power = omap_set_power;
+	musb->a_wait_bcon = MUSB_TIMEOUT_A_WAIT_BCON;
+
+	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+
+	return 0;
+}
+
+int musb_platform_suspend(struct musb *musb)
+{
+	u32 l;
+
+	if (!musb->clock)
+		return 0;
+
+	/* in any role */
+	l = omap_readl(OTG_FORCESTDBY);
+	l |= ENABLEFORCE;	/* enable MSTANDBY */
+	omap_writel(l, OTG_FORCESTDBY);
+
+	l = omap_readl(OTG_SYSCONFIG);
+	l |= ENABLEWAKEUP;	/* enable wakeup */
+	omap_writel(l, OTG_SYSCONFIG);
+
+	if (musb->xceiv.set_suspend)
+		musb->xceiv.set_suspend(&musb->xceiv, 1);
+
+	if (musb->set_clock)
+		musb->set_clock(musb->clock, 0);
+	else
+		clk_disable(musb->clock);
+
+	return 0;
+}
+
+static int musb_platform_resume(struct musb *musb)
+{
+	u32 l;
+
+	if (!musb->clock)
+		return 0;
+
+	if (musb->xceiv.set_suspend)
+		musb->xceiv.set_suspend(&musb->xceiv, 0);
+
+	if (musb->set_clock)
+		musb->set_clock(musb->clock, 1);
+	else
+		clk_enable(musb->clock);
+
+	l = omap_readl(OTG_SYSCONFIG);
+	l &= ~ENABLEWAKEUP;	/* disable wakeup */
+	omap_writel(l, OTG_SYSCONFIG);
+
+	l = omap_readl(OTG_FORCESTDBY);
+	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
+	omap_writel(l, OTG_FORCESTDBY);
+
+	return 0;
+}
+
+
+int musb_platform_exit(struct musb *musb)
+{
+
+	omap_vbus_power(musb, 0 /*off*/, 1);
+
+	musb_platform_suspend(musb);
+
+	clk_put(musb->clock);
+	musb->clock = 0;
+
+	return 0;
+}
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
new file mode 100644
index 000000000000..786a62071f72
--- /dev/null
+++ b/drivers/usb/musb/omap2430.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ */
+
+#ifndef __MUSB_OMAP243X_H__
+#define __MUSB_OMAP243X_H__
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#include <asm/arch/hardware.h>
+#include <asm/arch/usb.h>
+
+/*
+ * OMAP2430-specific definitions
+ */
+
+#define MENTOR_BASE_OFFSET	0
+#if	defined(CONFIG_ARCH_OMAP2430)
+#define	OMAP_HSOTG_BASE		(OMAP243X_HS_BASE)
+#elif	defined(CONFIG_ARCH_OMAP3430)
+#define	OMAP_HSOTG_BASE		(OMAP34XX_HSUSB_OTG_BASE)
+#endif
+#define OMAP_HSOTG(offset)	(OMAP_HSOTG_BASE + 0x400 + (offset))
+#define OTG_REVISION		OMAP_HSOTG(0x0)
+#define OTG_SYSCONFIG		OMAP_HSOTG(0x4)
+#	define	MIDLEMODE	12	/* bit position */
+#	define	FORCESTDBY		(0 << MIDLEMODE)
+#	define	NOSTDBY			(1 << MIDLEMODE)
+#	define	SMARTSTDBY		(2 << MIDLEMODE)
+#	define	SIDLEMODE		3	/* bit position */
+#	define	FORCEIDLE		(0 << SIDLEMODE)
+#	define	NOIDLE			(1 << SIDLEMODE)
+#	define	SMARTIDLE		(2 << SIDLEMODE)
+#	define	ENABLEWAKEUP		(1 << 2)
+#	define	SOFTRST			(1 << 1)
+#	define	AUTOIDLE		(1 << 0)
+#define OTG_SYSSTATUS		OMAP_HSOTG(0x8)
+#	define	RESETDONE		(1 << 0)
+#define OTG_INTERFSEL		OMAP_HSOTG(0xc)
+#	define	EXTCP			(1 << 2)
+#	define	PHYSEL		0	/* bit position */
+#	define	UTMI_8BIT		(0 << PHYSEL)
+#	define	ULPI_12PIN		(1 << PHYSEL)
+#	define	ULPI_8PIN		(2 << PHYSEL)
+#define OTG_SIMENABLE		OMAP_HSOTG(0x10)
+#	define	TM1			(1 << 0)
+#define OTG_FORCESTDBY		OMAP_HSOTG(0x14)
+#	define	ENABLEFORCE		(1 << 0)
+
+#endif	/* CONFIG_ARCH_OMAP2430 */
+
+#endif	/* __MUSB_OMAP243X_H__ */
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
new file mode 100644
index 000000000000..b73b036f3d77
--- /dev/null
+++ b/drivers/usb/musb/tusb6010.c
@@ -0,0 +1,1151 @@
+/*
+ * TUSB6010 USB 2.0 OTG Dual Role controller
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Notes:
+ * - Driver assumes that interface to external host (main CPU) is
+ *   configured for NOR FLASH interface instead of VLYNQ serial
+ *   interface.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+
+#include "musb_core.h"
+
+static void tusb_source_power(struct musb *musb, int is_on);
+
+#define TUSB_REV_MAJOR(reg_val)		((reg_val >> 4) & 0xf)
+#define TUSB_REV_MINOR(reg_val)		(reg_val & 0xf)
+
+/*
+ * Checks the revision. We need to use the DMA register as 3.0 does not
+ * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
+ */
+u8 tusb_get_revision(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		die_id;
+	u8		rev;
+
+	rev = musb_readl(tbase, TUSB_DMA_CTRL_REV) & 0xff;
+	if (TUSB_REV_MAJOR(rev) == 3) {
+		die_id = TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase,
+				TUSB_DIDR1_HI));
+		if (die_id >= TUSB_DIDR1_HI_REV_31)
+			rev |= 1;
+	}
+
+	return rev;
+}
+
+static int __init tusb_print_revision(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u8		rev;
+
+	rev = tusb_get_revision(musb);
+
+	pr_info("tusb: %s%i.%i %s%i.%i %s%i.%i %s%i.%i %s%i %s%i.%i\n",
+		"prcm",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_PRCM_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_PRCM_REV)),
+		"int",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_INT_CTRL_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_INT_CTRL_REV)),
+		"gpio",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_GPIO_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_GPIO_REV)),
+		"dma",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_DMA_CTRL_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_DMA_CTRL_REV)),
+		"dieid",
+		TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase, TUSB_DIDR1_HI)),
+		"rev",
+		TUSB_REV_MAJOR(rev), TUSB_REV_MINOR(rev));
+
+	return tusb_get_revision(musb);
+}
+
+#define WBUS_QUIRK_MASK	(TUSB_PHY_OTG_CTRL_TESTM2 | TUSB_PHY_OTG_CTRL_TESTM1 \
+				| TUSB_PHY_OTG_CTRL_TESTM0)
+
+/*
+ * Workaround for spontaneous WBUS wake-up issue #2 for tusb3.0.
+ * Disables power detection in PHY for the duration of idle.
+ */
+static void tusb_wbus_quirk(struct musb *musb, int enabled)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	static u32	phy_otg_ctrl, phy_otg_ena;
+	u32		tmp;
+
+	if (enabled) {
+		phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+		phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+		tmp = TUSB_PHY_OTG_CTRL_WRPROTECT
+				| phy_otg_ena | WBUS_QUIRK_MASK;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL, tmp);
+		tmp = phy_otg_ena & ~WBUS_QUIRK_MASK;
+		tmp |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_TESTM2;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, tmp);
+		DBG(2, "Enabled tusb wbus quirk ctrl %08x ena %08x\n",
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL),
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE));
+	} else if (musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE)
+					& TUSB_PHY_OTG_CTRL_TESTM2) {
+		tmp = TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ctrl;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL, tmp);
+		tmp = TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ena;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, tmp);
+		DBG(2, "Disabled tusb wbus quirk ctrl %08x ena %08x\n",
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL),
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE));
+		phy_otg_ctrl = 0;
+		phy_otg_ena = 0;
+	}
+}
+
+/*
+ * TUSB 6010 may use a parallel bus that doesn't support byte ops;
+ * so both loading and unloading FIFOs need explicit byte counts.
+ */
+
+static inline void
+tusb_fifo_write_unaligned(void __iomem *fifo, const u8 *buf, u16 len)
+{
+	u32		val;
+	int		i;
+
+	if (len > 4) {
+		for (i = 0; i < (len >> 2); i++) {
+			memcpy(&val, buf, 4);
+			musb_writel(fifo, 0, val);
+			buf += 4;
+		}
+		len %= 4;
+	}
+	if (len > 0) {
+		/* Write the rest 1 - 3 bytes to FIFO */
+		memcpy(&val, buf, len);
+		musb_writel(fifo, 0, val);
+	}
+}
+
+static inline void tusb_fifo_read_unaligned(void __iomem *fifo,
+						void __iomem *buf, u16 len)
+{
+	u32		val;
+	int		i;
+
+	if (len > 4) {
+		for (i = 0; i < (len >> 2); i++) {
+			val = musb_readl(fifo, 0);
+			memcpy(buf, &val, 4);
+			buf += 4;
+		}
+		len %= 4;
+	}
+	if (len > 0) {
+		/* Read the rest 1 - 3 bytes from FIFO */
+		val = musb_readl(fifo, 0);
+		memcpy(buf, &val, len);
+	}
+}
+
+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf)
+{
+	void __iomem	*ep_conf = hw_ep->conf;
+	void __iomem	*fifo = hw_ep->fifo;
+	u8		epnum = hw_ep->epnum;
+
+	prefetch(buf);
+
+	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+			'T', epnum, fifo, len, buf);
+
+	if (epnum)
+		musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(len));
+	else
+		musb_writel(ep_conf, 0, TUSB_EP0_CONFIG_DIR_TX |
+			TUSB_EP0_CONFIG_XFR_SIZE(len));
+
+	if (likely((0x01 & (unsigned long) buf) == 0)) {
+
+		/* Best case is 32bit-aligned destination address */
+		if ((0x02 & (unsigned long) buf) == 0) {
+			if (len >= 4) {
+				writesl(fifo, buf, len >> 2);
+				buf += (len & ~0x03);
+				len &= 0x03;
+			}
+		} else {
+			if (len >= 2) {
+				u32 val;
+				int i;
+
+				/* Cannot use writesw, fifo is 32-bit */
+				for (i = 0; i < (len >> 2); i++) {
+					val = (u32)(*(u16 *)buf);
+					buf += 2;
+					val |= (*(u16 *)buf) << 16;
+					buf += 2;
+					musb_writel(fifo, 0, val);
+				}
+				len &= 0x03;
+			}
+		}
+	}
+
+	if (len > 0)
+		tusb_fifo_write_unaligned(fifo, buf, len);
+}
+
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
+{
+	void __iomem	*ep_conf = hw_ep->conf;
+	void __iomem	*fifo = hw_ep->fifo;
+	u8		epnum = hw_ep->epnum;
+
+	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+			'R', epnum, fifo, len, buf);
+
+	if (epnum)
+		musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(len));
+	else
+		musb_writel(ep_conf, 0, TUSB_EP0_CONFIG_XFR_SIZE(len));
+
+	if (likely((0x01 & (unsigned long) buf) == 0)) {
+
+		/* Best case is 32bit-aligned destination address */
+		if ((0x02 & (unsigned long) buf) == 0) {
+			if (len >= 4) {
+				readsl(fifo, buf, len >> 2);
+				buf += (len & ~0x03);
+				len &= 0x03;
+			}
+		} else {
+			if (len >= 2) {
+				u32 val;
+				int i;
+
+				/* Cannot use readsw, fifo is 32-bit */
+				for (i = 0; i < (len >> 2); i++) {
+					val = musb_readl(fifo, 0);
+					*(u16 *)buf = (u16)(val & 0xffff);
+					buf += 2;
+					*(u16 *)buf = (u16)(val >> 16);
+					buf += 2;
+				}
+				len &= 0x03;
+			}
+		}
+	}
+
+	if (len > 0)
+		tusb_fifo_read_unaligned(fifo, buf, len);
+}
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+
+/* This is used by gadget drivers, and OTG transceiver logic, allowing
+ * at most mA current to be drawn from VBUS during a Default-B session
+ * (that is, while VBUS exceeds 4.4V).  In Default-A (including pure host
+ * mode), or low power Default-B sessions, something else supplies power.
+ * Caller must take care of locking.
+ */
+static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
+{
+	struct musb	*musb = container_of(x, struct musb, xceiv);
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		reg;
+
+	/*
+	 * Keep clock active when enabled. Note that this is not tied to
+	 * drawing VBUS, as with OTG mA can be less than musb->min_power.
+	 */
+	if (musb->set_clock) {
+		if (mA)
+			musb->set_clock(musb->clock, 1);
+		else
+			musb->set_clock(musb->clock, 0);
+	}
+
+	/* tps65030 seems to consume max 100mA, with maybe 60mA available
+	 * (measured on one board) for things other than tps and tusb.
+	 *
+	 * Boards sharing the CPU clock with CLKIN will need to prevent
+	 * certain idle sleep states while the USB link is active.
+	 *
+	 * REVISIT we could use VBUS to supply only _one_ of { 1.5V, 3.3V }.
+	 * The actual current usage would be very board-specific.  For now,
+	 * it's simpler to just use an aggregate (also board-specific).
+	 */
+	if (x->default_a || mA < (musb->min_power << 1))
+		mA = 0;
+
+	reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
+	if (mA) {
+		musb->is_bus_powered = 1;
+		reg |= TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN;
+	} else {
+		musb->is_bus_powered = 0;
+		reg &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
+	}
+	musb_writel(tbase, TUSB_PRCM_MNGMT, reg);
+
+	DBG(2, "draw max %d mA VBUS\n", mA);
+	return 0;
+}
+
+#else
+#define tusb_draw_power	NULL
+#endif
+
+/* workaround for issue 13:  change clock during chip idle
+ * (to be fixed in rev3 silicon) ... symptoms include disconnect
+ * or looping suspend/resume cycles
+ */
+static void tusb_set_clock_source(struct musb *musb, unsigned mode)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		reg;
+
+	reg = musb_readl(tbase, TUSB_PRCM_CONF);
+	reg &= ~TUSB_PRCM_CONF_SYS_CLKSEL(0x3);
+
+	/* 0 = refclk (clkin, XI)
+	 * 1 = PHY 60 MHz (internal PLL)
+	 * 2 = not supported
+	 * 3 = what?
+	 */
+	if (mode > 0)
+		reg |= TUSB_PRCM_CONF_SYS_CLKSEL(mode & 0x3);
+
+	musb_writel(tbase, TUSB_PRCM_CONF, reg);
+
+	/* FIXME tusb6010_platform_retime(mode == 0); */
+}
+
+/*
+ * Idle TUSB6010 until next wake-up event; NOR access always wakes.
+ * Other code ensures that we idle unless we're connected _and_ the
+ * USB link is not suspended ... and tells us the relevant wakeup
+ * events.  SW_EN for voltage is handled separately.
+ */
+void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		reg;
+
+	if ((wakeup_enables & TUSB_PRCM_WBUS)
+			&& (tusb_get_revision(musb) == TUSB_REV_30))
+		tusb_wbus_quirk(musb, 1);
+
+	tusb_set_clock_source(musb, 0);
+
+	wakeup_enables |= TUSB_PRCM_WNORCS;
+	musb_writel(tbase, TUSB_PRCM_WAKEUP_MASK, ~wakeup_enables);
+
+	/* REVISIT writeup of WID implies that if WID set and ID is grounded,
+	 * TUSB_PHY_OTG_CTRL.TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP must be cleared.
+	 * Presumably that's mostly to save power, hence WID is immaterial ...
+	 */
+
+	reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
+	/* issue 4: when driving vbus, use hipower (vbus_det) comparator */
+	if (is_host_active(musb)) {
+		reg |= TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+		reg &= ~TUSB_PRCM_MNGMT_OTG_SESS_END_EN;
+	} else {
+		reg |= TUSB_PRCM_MNGMT_OTG_SESS_END_EN;
+		reg &= ~TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+	}
+	reg |= TUSB_PRCM_MNGMT_PM_IDLE | TUSB_PRCM_MNGMT_DEV_IDLE;
+	musb_writel(tbase, TUSB_PRCM_MNGMT, reg);
+
+	DBG(6, "idle, wake on %02x\n", wakeup_enables);
+}
+
+/*
+ * Updates cable VBUS status. Caller must take care of locking.
+ */
+int musb_platform_get_vbus_status(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		otg_stat, prcm_mngmt;
+	int		ret = 0;
+
+	otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	prcm_mngmt = musb_readl(tbase, TUSB_PRCM_MNGMT);
+
+	/* Temporarily enable VBUS detection if it was disabled for
+	 * suspend mode. Unless it's enabled otg_stat and devctl will
+	 * not show correct VBUS state.
+	 */
+	if (!(prcm_mngmt & TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN)) {
+		u32 tmp = prcm_mngmt;
+		tmp |= TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+		musb_writel(tbase, TUSB_PRCM_MNGMT, tmp);
+		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+		musb_writel(tbase, TUSB_PRCM_MNGMT, prcm_mngmt);
+	}
+
+	if (otg_stat & TUSB_DEV_OTG_STAT_VBUS_VALID)
+		ret = 1;
+
+	return ret;
+}
+
+static struct timer_list musb_idle_timer;
+
+static void musb_do_idle(unsigned long _musb)
+{
+	struct musb	*musb = (void *)_musb;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_WAIT_BCON:
+		if ((musb->a_wait_bcon != 0)
+			&& (musb->idle_timeout == 0
+				|| time_after(jiffies, musb->idle_timeout))) {
+			DBG(4, "Nothing connected %s, turning off VBUS\n",
+					otg_state_string(musb));
+		}
+		/* FALLTHROUGH */
+	case OTG_STATE_A_IDLE:
+		tusb_source_power(musb, 0);
+	default:
+		break;
+	}
+
+	if (!musb->is_active) {
+		u32	wakeups;
+
+		/* wait until khubd handles port change status */
+		if (is_host_active(musb) && (musb->port1_status >> 16))
+			goto done;
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+		if (is_peripheral_enabled(musb) && !musb->gadget_driver)
+			wakeups = 0;
+		else {
+			wakeups = TUSB_PRCM_WHOSTDISCON
+					| TUSB_PRCM_WBUS
+					| TUSB_PRCM_WVBUS;
+			if (is_otg_enabled(musb))
+				wakeups |= TUSB_PRCM_WID;
+		}
+#else
+		wakeups = TUSB_PRCM_WHOSTDISCON | TUSB_PRCM_WBUS;
+#endif
+		tusb_allow_idle(musb, wakeups);
+	}
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+/*
+ * Maybe put TUSB6010 into idle mode mode depending on USB link status,
+ * like "disconnected" or "suspended".  We'll be woken out of it by
+ * connect, resume, or disconnect.
+ *
+ * Needs to be called as the last function everywhere where there is
+ * register access to TUSB6010 because of NOR flash wake-up.
+ * Caller should own controller spinlock.
+ *
+ * Delay because peripheral enables D+ pullup 3msec after SE0, and
+ * we don't want to treat that full speed J as a wakeup event.
+ * ... peripherals must draw only suspend current after 10 msec.
+ */
+void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+{
+	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
+	static unsigned long	last_timer;
+
+	if (timeout == 0)
+		timeout = default_timeout;
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || ((musb->a_wait_bcon == 0)
+			&& (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+		DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
+		del_timer(&musb_idle_timer);
+		last_timer = jiffies;
+		return;
+	}
+
+	if (time_after(last_timer, timeout)) {
+		if (!timer_pending(&musb_idle_timer))
+			last_timer = timeout;
+		else {
+			DBG(4, "Longer idle timer already pending, ignoring\n");
+			return;
+		}
+	}
+	last_timer = timeout;
+
+	DBG(4, "%s inactive, for idle timer for %lu ms\n",
+		otg_state_string(musb),
+		(unsigned long)jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&musb_idle_timer, timeout);
+}
+
+/* ticks of 60 MHz clock */
+#define DEVCLOCK		60000000
+#define OTG_TIMER_MS(msecs)	((msecs) \
+		? (TUSB_DEV_OTG_TIMER_VAL((DEVCLOCK/1000)*(msecs)) \
+				| TUSB_DEV_OTG_TIMER_ENABLE) \
+		: 0)
+
+static void tusb_source_power(struct musb *musb, int is_on)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		conf, prcm, timer;
+	u8		devctl;
+
+	/* HDRC controls CPEN, but beware current surges during device
+	 * connect.  They can trigger transient overcurrent conditions
+	 * that must be ignored.
+	 */
+
+	prcm = musb_readl(tbase, TUSB_PRCM_MNGMT);
+	conf = musb_readl(tbase, TUSB_DEV_CONF);
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	if (is_on) {
+		if (musb->set_clock)
+			musb->set_clock(musb->clock, 1);
+		timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
+		musb->xceiv.default_a = 1;
+		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		devctl |= MUSB_DEVCTL_SESSION;
+
+		conf |= TUSB_DEV_CONF_USB_HOST_MODE;
+		MUSB_HST_MODE(musb);
+	} else {
+		u32	otg_stat;
+
+		timer = 0;
+
+		/* If ID pin is grounded, we want to be a_idle */
+		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+		if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) {
+			switch (musb->xceiv.state) {
+			case OTG_STATE_A_WAIT_VRISE:
+			case OTG_STATE_A_WAIT_BCON:
+				musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+				break;
+			case OTG_STATE_A_WAIT_VFALL:
+				musb->xceiv.state = OTG_STATE_A_IDLE;
+				break;
+			default:
+				musb->xceiv.state = OTG_STATE_A_IDLE;
+			}
+			musb->is_active = 0;
+			musb->xceiv.default_a = 1;
+			MUSB_HST_MODE(musb);
+		} else {
+			musb->is_active = 0;
+			musb->xceiv.default_a = 0;
+			musb->xceiv.state = OTG_STATE_B_IDLE;
+			MUSB_DEV_MODE(musb);
+		}
+
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		conf &= ~TUSB_DEV_CONF_USB_HOST_MODE;
+		if (musb->set_clock)
+			musb->set_clock(musb->clock, 0);
+	}
+	prcm &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
+
+	musb_writel(tbase, TUSB_PRCM_MNGMT, prcm);
+	musb_writel(tbase, TUSB_DEV_OTG_TIMER, timer);
+	musb_writel(tbase, TUSB_DEV_CONF, conf);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	DBG(1, "VBUS %s, devctl %02x otg %3x conf %08x prcm %08x\n",
+		otg_state_string(musb),
+		musb_readb(musb->mregs, MUSB_DEVCTL),
+		musb_readl(tbase, TUSB_DEV_OTG_STAT),
+		conf, prcm);
+}
+
+/*
+ * Sets the mode to OTG, peripheral or host by changing the ID detection.
+ * Caller must take care of locking.
+ *
+ * Note that if a mini-A cable is plugged in the ID line will stay down as
+ * the weak ID pull-up is not able to pull the ID up.
+ *
+ * REVISIT: It would be possible to add support for changing between host
+ * and peripheral modes in non-OTG configurations by reconfiguring hardware
+ * and then setting musb->board_mode. For now, only support OTG mode.
+ */
+void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf;
+
+	if (musb->board_mode != MUSB_OTG) {
+		ERR("Changing mode currently only supported in OTG mode\n");
+		return;
+	}
+
+	otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+	phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+	dev_conf = musb_readl(tbase, TUSB_DEV_CONF);
+
+	switch (musb_mode) {
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	case MUSB_HOST:		/* Disable PHY ID detect, ground ID */
+		phy_otg_ctrl &= ~TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		dev_conf |= TUSB_DEV_CONF_ID_SEL;
+		dev_conf &= ~TUSB_DEV_CONF_SOFT_ID;
+		break;
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	case MUSB_PERIPHERAL:	/* Disable PHY ID detect, keep ID pull-up on */
+		phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		dev_conf |= (TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
+		break;
+#endif
+
+#ifdef CONFIG_USB_MUSB_OTG
+	case MUSB_OTG:		/* Use PHY ID detection */
+		phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		dev_conf &= ~(TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
+		break;
+#endif
+
+	default:
+		DBG(2, "Trying to set unknown mode %i\n", musb_mode);
+	}
+
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL,
+			TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ctrl);
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE,
+			TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ena);
+	musb_writel(tbase, TUSB_DEV_CONF, dev_conf);
+
+	otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	if ((musb_mode == MUSB_PERIPHERAL) &&
+		!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS))
+			INFO("Cannot be peripheral with mini-A cable "
+			"otg_stat: %08x\n", otg_stat);
+}
+
+static inline unsigned long
+tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
+{
+	u32		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	unsigned long	idle_timeout = 0;
+
+	/* ID pin */
+	if ((int_src & TUSB_INT_SRC_ID_STATUS_CHNG)) {
+		int	default_a;
+
+		if (is_otg_enabled(musb))
+			default_a = !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS);
+		else
+			default_a = is_host_enabled(musb);
+		DBG(2, "Default-%c\n", default_a ? 'A' : 'B');
+		musb->xceiv.default_a = default_a;
+		tusb_source_power(musb, default_a);
+
+		/* Don't allow idling immediately */
+		if (default_a)
+			idle_timeout = jiffies + (HZ * 3);
+	}
+
+	/* VBUS state change */
+	if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) {
+
+		/* B-dev state machine:  no vbus ~= disconnect */
+		if ((is_otg_enabled(musb) && !musb->xceiv.default_a)
+				|| !is_host_enabled(musb)) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+			/* ? musb_root_disconnect(musb); */
+			musb->port1_status &=
+				~(USB_PORT_STAT_CONNECTION
+				| USB_PORT_STAT_ENABLE
+				| USB_PORT_STAT_LOW_SPEED
+				| USB_PORT_STAT_HIGH_SPEED
+				| USB_PORT_STAT_TEST
+				);
+#endif
+
+			if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
+				DBG(1, "Forcing disconnect (no interrupt)\n");
+				if (musb->xceiv.state != OTG_STATE_B_IDLE) {
+					/* INTR_DISCONNECT can hide... */
+					musb->xceiv.state = OTG_STATE_B_IDLE;
+					musb->int_usb |= MUSB_INTR_DISCONNECT;
+				}
+				musb->is_active = 0;
+			}
+			DBG(2, "vbus change, %s, otg %03x\n",
+				otg_state_string(musb), otg_stat);
+			idle_timeout = jiffies + (1 * HZ);
+			schedule_work(&musb->irq_work);
+
+		} else /* A-dev state machine */ {
+			DBG(2, "vbus change, %s, otg %03x\n",
+				otg_state_string(musb), otg_stat);
+
+			switch (musb->xceiv.state) {
+			case OTG_STATE_A_IDLE:
+				DBG(2, "Got SRP, turning on VBUS\n");
+				musb_set_vbus(musb, 1);
+
+				/* CONNECT can wake if a_wait_bcon is set */
+				if (musb->a_wait_bcon != 0)
+					musb->is_active = 0;
+				else
+					musb->is_active = 1;
+
+				/*
+				 * OPT FS A TD.4.6 needs few seconds for
+				 * A_WAIT_VRISE
+				 */
+				idle_timeout = jiffies + (2 * HZ);
+
+				break;
+			case OTG_STATE_A_WAIT_VRISE:
+				/* ignore; A-session-valid < VBUS_VALID/2,
+				 * we monitor this with the timer
+				 */
+				break;
+			case OTG_STATE_A_WAIT_VFALL:
+				/* REVISIT this irq triggers during short
+				 * spikes caused by enumeration ...
+				 */
+				if (musb->vbuserr_retry) {
+					musb->vbuserr_retry--;
+					tusb_source_power(musb, 1);
+				} else {
+					musb->vbuserr_retry
+						= VBUSERR_RETRY_COUNT;
+					tusb_source_power(musb, 0);
+				}
+				break;
+			default:
+				break;
+			}
+		}
+	}
+
+	/* OTG timer expiration */
+	if (int_src & TUSB_INT_SRC_OTG_TIMEOUT) {
+		u8	devctl;
+
+		DBG(4, "%s timer, %03x\n", otg_state_string(musb), otg_stat);
+
+		switch (musb->xceiv.state) {
+		case OTG_STATE_A_WAIT_VRISE:
+			/* VBUS has probably been valid for a while now,
+			 * but may well have bounced out of range a bit
+			 */
+			devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+			if (otg_stat & TUSB_DEV_OTG_STAT_VBUS_VALID) {
+				if ((devctl & MUSB_DEVCTL_VBUS)
+						!= MUSB_DEVCTL_VBUS) {
+					DBG(2, "devctl %02x\n", devctl);
+					break;
+				}
+				musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+				musb->is_active = 0;
+				idle_timeout = jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon);
+			} else {
+				/* REVISIT report overcurrent to hub? */
+				ERR("vbus too slow, devctl %02x\n", devctl);
+				tusb_source_power(musb, 0);
+			}
+			break;
+		case OTG_STATE_A_WAIT_BCON:
+			if (musb->a_wait_bcon != 0)
+				idle_timeout = jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon);
+			break;
+		case OTG_STATE_A_SUSPEND:
+			break;
+		case OTG_STATE_B_WAIT_ACON:
+			break;
+		default:
+			break;
+		}
+	}
+	schedule_work(&musb->irq_work);
+
+	return idle_timeout;
+}
+
+static irqreturn_t tusb_interrupt(int irq, void *__hci)
+{
+	struct musb	*musb = __hci;
+	void __iomem	*tbase = musb->ctrl_base;
+	unsigned long	flags, idle_timeout = 0;
+	u32		int_mask, int_src;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/* Mask all interrupts to allow using both edge and level GPIO irq */
+	int_mask = musb_readl(tbase, TUSB_INT_MASK);
+	musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
+
+	int_src = musb_readl(tbase, TUSB_INT_SRC) & ~TUSB_INT_SRC_RESERVED_BITS;
+	DBG(3, "TUSB IRQ %08x\n", int_src);
+
+	musb->int_usb = (u8) int_src;
+
+	/* Acknowledge wake-up source interrupts */
+	if (int_src & TUSB_INT_SRC_DEV_WAKEUP) {
+		u32	reg;
+		u32	i;
+
+		if (tusb_get_revision(musb) == TUSB_REV_30)
+			tusb_wbus_quirk(musb, 0);
+
+		/* there are issues re-locking the PLL on wakeup ... */
+
+		/* work around issue 8 */
+		for (i = 0xf7f7f7; i > 0xf7f7f7 - 1000; i--) {
+			musb_writel(tbase, TUSB_SCRATCH_PAD, 0);
+			musb_writel(tbase, TUSB_SCRATCH_PAD, i);
+			reg = musb_readl(tbase, TUSB_SCRATCH_PAD);
+			if (reg == i)
+				break;
+			DBG(6, "TUSB NOR not ready\n");
+		}
+
+		/* work around issue 13 (2nd half) */
+		tusb_set_clock_source(musb, 1);
+
+		reg = musb_readl(tbase, TUSB_PRCM_WAKEUP_SOURCE);
+		musb_writel(tbase, TUSB_PRCM_WAKEUP_CLEAR, reg);
+		if (reg & ~TUSB_PRCM_WNORCS) {
+			musb->is_active = 1;
+			schedule_work(&musb->irq_work);
+		}
+		DBG(3, "wake %sactive %02x\n",
+				musb->is_active ? "" : "in", reg);
+
+		/* REVISIT host side TUSB_PRCM_WHOSTDISCON, TUSB_PRCM_WBUS */
+	}
+
+	if (int_src & TUSB_INT_SRC_USB_IP_CONN)
+		del_timer(&musb_idle_timer);
+
+	/* OTG state change reports (annoyingly) not issued by Mentor core */
+	if (int_src & (TUSB_INT_SRC_VBUS_SENSE_CHNG
+				| TUSB_INT_SRC_OTG_TIMEOUT
+				| TUSB_INT_SRC_ID_STATUS_CHNG))
+		idle_timeout = tusb_otg_ints(musb, int_src, tbase);
+
+	/* TX dma callback must be handled here, RX dma callback is
+	 * handled in tusb_omap_dma_cb.
+	 */
+	if ((int_src & TUSB_INT_SRC_TXRX_DMA_DONE)) {
+		u32	dma_src = musb_readl(tbase, TUSB_DMA_INT_SRC);
+		u32	real_dma_src = musb_readl(tbase, TUSB_DMA_INT_MASK);
+
+		DBG(3, "DMA IRQ %08x\n", dma_src);
+		real_dma_src = ~real_dma_src & dma_src;
+		if (tusb_dma_omap() && real_dma_src) {
+			int	tx_source = (real_dma_src & 0xffff);
+			int	i;
+
+			for (i = 1; i <= 15; i++) {
+				if (tx_source & (1 << i)) {
+					DBG(3, "completing ep%i %s\n", i, "tx");
+					musb_dma_completion(musb, i, 1);
+				}
+			}
+		}
+		musb_writel(tbase, TUSB_DMA_INT_CLEAR, dma_src);
+	}
+
+	/* EP interrupts. In OCP mode tusb6010 mirrors the MUSB interrupts */
+	if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX)) {
+		u32	musb_src = musb_readl(tbase, TUSB_USBIP_INT_SRC);
+
+		musb_writel(tbase, TUSB_USBIP_INT_CLEAR, musb_src);
+		musb->int_rx = (((musb_src >> 16) & 0xffff) << 1);
+		musb->int_tx = (musb_src & 0xffff);
+	} else {
+		musb->int_rx = 0;
+		musb->int_tx = 0;
+	}
+
+	if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX | 0xff))
+		musb_interrupt(musb);
+
+	/* Acknowledge TUSB interrupts. Clear only non-reserved bits */
+	musb_writel(tbase, TUSB_INT_SRC_CLEAR,
+		int_src & ~TUSB_INT_MASK_RESERVED_BITS);
+
+	musb_platform_try_idle(musb, idle_timeout);
+
+	musb_writel(tbase, TUSB_INT_MASK, int_mask);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static int dma_off;
+
+/*
+ * Enables TUSB6010. Caller must take care of locking.
+ * REVISIT:
+ * - Check what is unnecessary in MGC_HdrcStart()
+ */
+void musb_platform_enable(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+
+	/* Setup TUSB6010 main interrupt mask. Enable all interrupts except SOF.
+	 * REVISIT: Enable and deal with TUSB_INT_SRC_USB_IP_SOF */
+	musb_writel(tbase, TUSB_INT_MASK, TUSB_INT_SRC_USB_IP_SOF);
+
+	/* Setup TUSB interrupt, disable DMA and GPIO interrupts */
+	musb_writel(tbase, TUSB_USBIP_INT_MASK, 0);
+	musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
+	musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
+
+	/* Clear all subsystem interrups */
+	musb_writel(tbase, TUSB_USBIP_INT_CLEAR, 0x7fffffff);
+	musb_writel(tbase, TUSB_DMA_INT_CLEAR, 0x7fffffff);
+	musb_writel(tbase, TUSB_GPIO_INT_CLEAR, 0x1ff);
+
+	/* Acknowledge pending interrupt(s) */
+	musb_writel(tbase, TUSB_INT_SRC_CLEAR, ~TUSB_INT_MASK_RESERVED_BITS);
+
+	/* Only 0 clock cycles for minimum interrupt de-assertion time and
+	 * interrupt polarity active low seems to work reliably here */
+	musb_writel(tbase, TUSB_INT_CTRL_CONF,
+			TUSB_INT_CTRL_CONF_INT_RELCYC(0));
+
+	set_irq_type(musb->nIrq, IRQ_TYPE_LEVEL_LOW);
+
+	/* maybe force into the Default-A OTG state machine */
+	if (!(musb_readl(tbase, TUSB_DEV_OTG_STAT)
+			& TUSB_DEV_OTG_STAT_ID_STATUS))
+		musb_writel(tbase, TUSB_INT_SRC_SET,
+				TUSB_INT_SRC_ID_STATUS_CHNG);
+
+	if (is_dma_capable() && dma_off)
+		printk(KERN_WARNING "%s %s: dma not reactivated\n",
+				__FILE__, __func__);
+	else
+		dma_off = 1;
+}
+
+/*
+ * Disables TUSB6010. Caller must take care of locking.
+ */
+void musb_platform_disable(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+
+	/* FIXME stop DMA, IRQs, timers, ... */
+
+	/* disable all IRQs */
+	musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
+	musb_writel(tbase, TUSB_USBIP_INT_MASK, 0x7fffffff);
+	musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
+	musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
+
+	del_timer(&musb_idle_timer);
+
+	if (is_dma_capable() && !dma_off) {
+		printk(KERN_WARNING "%s %s: dma still active\n",
+				__FILE__, __func__);
+		dma_off = 1;
+	}
+}
+
+/*
+ * Sets up TUSB6010 CPU interface specific signals and registers
+ * Note: Settings optimized for OMAP24xx
+ */
+static void __init tusb_setup_cpu_interface(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+
+	/*
+	 * Disable GPIO[5:0] pullups (used as output DMA requests)
+	 * Don't disable GPIO[7:6] as they are needed for wake-up.
+	 */
+	musb_writel(tbase, TUSB_PULLUP_1_CTRL, 0x0000003F);
+
+	/* Disable all pullups on NOR IF, DMAREQ0 and DMAREQ1 */
+	musb_writel(tbase, TUSB_PULLUP_2_CTRL, 0x01FFFFFF);
+
+	/* Turn GPIO[5:0] to DMAREQ[5:0] signals */
+	musb_writel(tbase, TUSB_GPIO_CONF, TUSB_GPIO_CONF_DMAREQ(0x3f));
+
+	/* Burst size 16x16 bits, all six DMA requests enabled, DMA request
+	 * de-assertion time 2 system clocks p 62 */
+	musb_writel(tbase, TUSB_DMA_REQ_CONF,
+		TUSB_DMA_REQ_CONF_BURST_SIZE(2) |
+		TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f) |
+		TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2));
+
+	/* Set 0 wait count for synchronous burst access */
+	musb_writel(tbase, TUSB_WAIT_COUNT, 1);
+}
+
+static int __init tusb_start(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	int		ret = 0;
+	unsigned long	flags;
+	u32		reg;
+
+	if (musb->board_set_power)
+		ret = musb->board_set_power(1);
+	if (ret != 0) {
+		printk(KERN_ERR "tusb: Cannot enable TUSB6010\n");
+		return ret;
+	}
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb_readl(tbase, TUSB_PROD_TEST_RESET) !=
+		TUSB_PROD_TEST_RESET_VAL) {
+		printk(KERN_ERR "tusb: Unable to detect TUSB6010\n");
+		goto err;
+	}
+
+	ret = tusb_print_revision(musb);
+	if (ret < 2) {
+		printk(KERN_ERR "tusb: Unsupported TUSB6010 revision %i\n",
+				ret);
+		goto err;
+	}
+
+	/* The uint bit for "USB non-PDR interrupt enable" has to be 1 when
+	 * NOR FLASH interface is used */
+	musb_writel(tbase, TUSB_VLYNQ_CTRL, 8);
+
+	/* Select PHY free running 60MHz as a system clock */
+	tusb_set_clock_source(musb, 1);
+
+	/* VBus valid timer 1us, disable DFT/Debug and VLYNQ clocks for
+	 * power saving, enable VBus detect and session end comparators,
+	 * enable IDpullup, enable VBus charging */
+	musb_writel(tbase, TUSB_PRCM_MNGMT,
+		TUSB_PRCM_MNGMT_VBUS_VALID_TIMER(0xa) |
+		TUSB_PRCM_MNGMT_VBUS_VALID_FLT_EN |
+		TUSB_PRCM_MNGMT_OTG_SESS_END_EN |
+		TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN |
+		TUSB_PRCM_MNGMT_OTG_ID_PULLUP);
+	tusb_setup_cpu_interface(musb);
+
+	/* simplify:  always sense/pullup ID pins, as if in OTG mode */
+	reg = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+	reg |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, reg);
+
+	reg = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+	reg |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL, reg);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return 0;
+
+err:
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (musb->board_set_power)
+		musb->board_set_power(0);
+
+	return -ENODEV;
+}
+
+int __init musb_platform_init(struct musb *musb)
+{
+	struct platform_device	*pdev;
+	struct resource		*mem;
+	void __iomem		*sync;
+	int			ret;
+
+	pdev = to_platform_device(musb->controller);
+
+	/* dma address for async dma */
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	musb->async = mem->start;
+
+	/* dma address for sync dma */
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!mem) {
+		pr_debug("no sync dma resource?\n");
+		return -ENODEV;
+	}
+	musb->sync = mem->start;
+
+	sync = ioremap(mem->start, mem->end - mem->start + 1);
+	if (!sync) {
+		pr_debug("ioremap for sync failed\n");
+		return -ENOMEM;
+	}
+	musb->sync_va = sync;
+
+	/* Offsets from base: VLYNQ at 0x000, MUSB regs at 0x400,
+	 * FIFOs at 0x600, TUSB at 0x800
+	 */
+	musb->mregs += TUSB_BASE_OFFSET;
+
+	ret = tusb_start(musb);
+	if (ret) {
+		printk(KERN_ERR "Could not start tusb6010 (%d)\n",
+				ret);
+		return -ENODEV;
+	}
+	musb->isr = tusb_interrupt;
+
+	if (is_host_enabled(musb))
+		musb->board_set_vbus = tusb_source_power;
+	if (is_peripheral_enabled(musb))
+		musb->xceiv.set_power = tusb_draw_power;
+
+	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+
+	return ret;
+}
+
+int musb_platform_exit(struct musb *musb)
+{
+	del_timer_sync(&musb_idle_timer);
+
+	if (musb->board_set_power)
+		musb->board_set_power(0);
+
+	iounmap(musb->sync_va);
+
+	return 0;
+}
diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h
new file mode 100644
index 000000000000..db6dad0750ae
--- /dev/null
+++ b/drivers/usb/musb/tusb6010.h
@@ -0,0 +1,402 @@
+/*
+ * Definitions for TUSB6010 USB 2.0 OTG Dual Role controller
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __TUSB6010_H__
+#define __TUSB6010_H__
+
+extern u8 tusb_get_revision(struct musb *musb);
+
+#ifdef CONFIG_USB_TUSB6010
+#define musb_in_tusb()			1
+#else
+#define musb_in_tusb()			0
+#endif
+
+#ifdef CONFIG_USB_TUSB_OMAP_DMA
+#define tusb_dma_omap()			1
+#else
+#define tusb_dma_omap()			0
+#endif
+
+/* VLYNQ control register. 32-bit at offset 0x000 */
+#define TUSB_VLYNQ_CTRL			0x004
+
+/* Mentor Graphics OTG core registers. 8,- 16- and 32-bit at offset 0x400 */
+#define TUSB_BASE_OFFSET		0x400
+
+/* FIFO registers 32-bit at offset 0x600 */
+#define TUSB_FIFO_BASE			0x600
+
+/* Device System & Control registers. 32-bit at offset 0x800 */
+#define TUSB_SYS_REG_BASE		0x800
+
+#define TUSB_DEV_CONF			(TUSB_SYS_REG_BASE + 0x000)
+#define		TUSB_DEV_CONF_USB_HOST_MODE		(1 << 16)
+#define		TUSB_DEV_CONF_PROD_TEST_MODE		(1 << 15)
+#define		TUSB_DEV_CONF_SOFT_ID			(1 << 1)
+#define		TUSB_DEV_CONF_ID_SEL			(1 << 0)
+
+#define TUSB_PHY_OTG_CTRL_ENABLE	(TUSB_SYS_REG_BASE + 0x004)
+#define TUSB_PHY_OTG_CTRL		(TUSB_SYS_REG_BASE + 0x008)
+#define		TUSB_PHY_OTG_CTRL_WRPROTECT		(0xa5 << 24)
+#define		TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP		(1 << 23)
+#define		TUSB_PHY_OTG_CTRL_OTG_VBUS_DET_EN	(1 << 19)
+#define		TUSB_PHY_OTG_CTRL_OTG_SESS_END_EN	(1 << 18)
+#define		TUSB_PHY_OTG_CTRL_TESTM2		(1 << 17)
+#define		TUSB_PHY_OTG_CTRL_TESTM1		(1 << 16)
+#define		TUSB_PHY_OTG_CTRL_TESTM0		(1 << 15)
+#define		TUSB_PHY_OTG_CTRL_TX_DATA2		(1 << 14)
+#define		TUSB_PHY_OTG_CTRL_TX_GZ2		(1 << 13)
+#define		TUSB_PHY_OTG_CTRL_TX_ENABLE2		(1 << 12)
+#define		TUSB_PHY_OTG_CTRL_DM_PULLDOWN		(1 << 11)
+#define		TUSB_PHY_OTG_CTRL_DP_PULLDOWN		(1 << 10)
+#define		TUSB_PHY_OTG_CTRL_OSC_EN		(1 << 9)
+#define		TUSB_PHY_OTG_CTRL_PHYREF_CLKSEL(v)	(((v) & 3) << 7)
+#define		TUSB_PHY_OTG_CTRL_PD			(1 << 6)
+#define		TUSB_PHY_OTG_CTRL_PLL_ON		(1 << 5)
+#define		TUSB_PHY_OTG_CTRL_EXT_RPU		(1 << 4)
+#define		TUSB_PHY_OTG_CTRL_PWR_GOOD		(1 << 3)
+#define		TUSB_PHY_OTG_CTRL_RESET			(1 << 2)
+#define		TUSB_PHY_OTG_CTRL_SUSPENDM		(1 << 1)
+#define		TUSB_PHY_OTG_CTRL_CLK_MODE		(1 << 0)
+
+/*OTG status register */
+#define TUSB_DEV_OTG_STAT		(TUSB_SYS_REG_BASE + 0x00c)
+#define		TUSB_DEV_OTG_STAT_PWR_CLK_GOOD		(1 << 8)
+#define		TUSB_DEV_OTG_STAT_SESS_END		(1 << 7)
+#define		TUSB_DEV_OTG_STAT_SESS_VALID		(1 << 6)
+#define		TUSB_DEV_OTG_STAT_VBUS_VALID		(1 << 5)
+#define		TUSB_DEV_OTG_STAT_VBUS_SENSE		(1 << 4)
+#define		TUSB_DEV_OTG_STAT_ID_STATUS		(1 << 3)
+#define		TUSB_DEV_OTG_STAT_HOST_DISCON		(1 << 2)
+#define		TUSB_DEV_OTG_STAT_LINE_STATE		(3 << 0)
+#define		TUSB_DEV_OTG_STAT_DP_ENABLE		(1 << 1)
+#define		TUSB_DEV_OTG_STAT_DM_ENABLE		(1 << 0)
+
+#define TUSB_DEV_OTG_TIMER		(TUSB_SYS_REG_BASE + 0x010)
+#	define TUSB_DEV_OTG_TIMER_ENABLE		(1 << 31)
+#	define TUSB_DEV_OTG_TIMER_VAL(v)		((v) & 0x07ffffff)
+#define TUSB_PRCM_REV			(TUSB_SYS_REG_BASE + 0x014)
+
+/* PRCM configuration register */
+#define TUSB_PRCM_CONF			(TUSB_SYS_REG_BASE + 0x018)
+#define		TUSB_PRCM_CONF_SFW_CPEN		(1 << 24)
+#define		TUSB_PRCM_CONF_SYS_CLKSEL(v)	(((v) & 3) << 16)
+
+/* PRCM management register */
+#define TUSB_PRCM_MNGMT			(TUSB_SYS_REG_BASE + 0x01c)
+#define		TUSB_PRCM_MNGMT_SRP_FIX_TIMER(v)	(((v) & 0xf) << 25)
+#define		TUSB_PRCM_MNGMT_SRP_FIX_EN		(1 << 24)
+#define		TUSB_PRCM_MNGMT_VBUS_VALID_TIMER(v)	(((v) & 0xf) << 20)
+#define		TUSB_PRCM_MNGMT_VBUS_VALID_FLT_EN	(1 << 19)
+#define		TUSB_PRCM_MNGMT_DFT_CLK_DIS		(1 << 18)
+#define		TUSB_PRCM_MNGMT_VLYNQ_CLK_DIS		(1 << 17)
+#define		TUSB_PRCM_MNGMT_OTG_SESS_END_EN		(1 << 10)
+#define		TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN		(1 << 9)
+#define		TUSB_PRCM_MNGMT_OTG_ID_PULLUP		(1 << 8)
+#define		TUSB_PRCM_MNGMT_15_SW_EN		(1 << 4)
+#define		TUSB_PRCM_MNGMT_33_SW_EN		(1 << 3)
+#define		TUSB_PRCM_MNGMT_5V_CPEN			(1 << 2)
+#define		TUSB_PRCM_MNGMT_PM_IDLE			(1 << 1)
+#define		TUSB_PRCM_MNGMT_DEV_IDLE		(1 << 0)
+
+/* Wake-up source clear and mask registers */
+#define TUSB_PRCM_WAKEUP_SOURCE		(TUSB_SYS_REG_BASE + 0x020)
+#define TUSB_PRCM_WAKEUP_CLEAR		(TUSB_SYS_REG_BASE + 0x028)
+#define TUSB_PRCM_WAKEUP_MASK		(TUSB_SYS_REG_BASE + 0x02c)
+#define		TUSB_PRCM_WAKEUP_RESERVED_BITS	(0xffffe << 13)
+#define		TUSB_PRCM_WGPIO_7	(1 << 12)
+#define		TUSB_PRCM_WGPIO_6	(1 << 11)
+#define		TUSB_PRCM_WGPIO_5	(1 << 10)
+#define		TUSB_PRCM_WGPIO_4	(1 << 9)
+#define		TUSB_PRCM_WGPIO_3	(1 << 8)
+#define		TUSB_PRCM_WGPIO_2	(1 << 7)
+#define		TUSB_PRCM_WGPIO_1	(1 << 6)
+#define		TUSB_PRCM_WGPIO_0	(1 << 5)
+#define		TUSB_PRCM_WHOSTDISCON	(1 << 4)	/* Host disconnect */
+#define		TUSB_PRCM_WBUS		(1 << 3)	/* USB bus resume */
+#define		TUSB_PRCM_WNORCS	(1 << 2)	/* NOR chip select */
+#define		TUSB_PRCM_WVBUS		(1 << 1)	/* OTG PHY VBUS */
+#define		TUSB_PRCM_WID		(1 << 0)	/* OTG PHY ID detect */
+
+#define TUSB_PULLUP_1_CTRL		(TUSB_SYS_REG_BASE + 0x030)
+#define TUSB_PULLUP_2_CTRL		(TUSB_SYS_REG_BASE + 0x034)
+#define TUSB_INT_CTRL_REV		(TUSB_SYS_REG_BASE + 0x038)
+#define TUSB_INT_CTRL_CONF		(TUSB_SYS_REG_BASE + 0x03c)
+#define TUSB_USBIP_INT_SRC		(TUSB_SYS_REG_BASE + 0x040)
+#define TUSB_USBIP_INT_SET		(TUSB_SYS_REG_BASE + 0x044)
+#define TUSB_USBIP_INT_CLEAR		(TUSB_SYS_REG_BASE + 0x048)
+#define TUSB_USBIP_INT_MASK		(TUSB_SYS_REG_BASE + 0x04c)
+#define TUSB_DMA_INT_SRC		(TUSB_SYS_REG_BASE + 0x050)
+#define TUSB_DMA_INT_SET		(TUSB_SYS_REG_BASE + 0x054)
+#define TUSB_DMA_INT_CLEAR		(TUSB_SYS_REG_BASE + 0x058)
+#define TUSB_DMA_INT_MASK		(TUSB_SYS_REG_BASE + 0x05c)
+#define TUSB_GPIO_INT_SRC		(TUSB_SYS_REG_BASE + 0x060)
+#define TUSB_GPIO_INT_SET		(TUSB_SYS_REG_BASE + 0x064)
+#define TUSB_GPIO_INT_CLEAR		(TUSB_SYS_REG_BASE + 0x068)
+#define TUSB_GPIO_INT_MASK		(TUSB_SYS_REG_BASE + 0x06c)
+
+/* NOR flash interrupt source registers */
+#define TUSB_INT_SRC			(TUSB_SYS_REG_BASE + 0x070)
+#define TUSB_INT_SRC_SET		(TUSB_SYS_REG_BASE + 0x074)
+#define TUSB_INT_SRC_CLEAR		(TUSB_SYS_REG_BASE + 0x078)
+#define TUSB_INT_MASK			(TUSB_SYS_REG_BASE + 0x07c)
+#define		TUSB_INT_SRC_TXRX_DMA_DONE		(1 << 24)
+#define		TUSB_INT_SRC_USB_IP_CORE		(1 << 17)
+#define		TUSB_INT_SRC_OTG_TIMEOUT		(1 << 16)
+#define		TUSB_INT_SRC_VBUS_SENSE_CHNG		(1 << 15)
+#define		TUSB_INT_SRC_ID_STATUS_CHNG		(1 << 14)
+#define		TUSB_INT_SRC_DEV_WAKEUP			(1 << 13)
+#define		TUSB_INT_SRC_DEV_READY			(1 << 12)
+#define		TUSB_INT_SRC_USB_IP_TX			(1 << 9)
+#define		TUSB_INT_SRC_USB_IP_RX			(1 << 8)
+#define		TUSB_INT_SRC_USB_IP_VBUS_ERR		(1 << 7)
+#define		TUSB_INT_SRC_USB_IP_VBUS_REQ		(1 << 6)
+#define		TUSB_INT_SRC_USB_IP_DISCON		(1 << 5)
+#define		TUSB_INT_SRC_USB_IP_CONN		(1 << 4)
+#define		TUSB_INT_SRC_USB_IP_SOF			(1 << 3)
+#define		TUSB_INT_SRC_USB_IP_RST_BABBLE		(1 << 2)
+#define		TUSB_INT_SRC_USB_IP_RESUME		(1 << 1)
+#define		TUSB_INT_SRC_USB_IP_SUSPEND		(1 << 0)
+
+/* NOR flash interrupt registers reserved bits. Must be written as 0 */
+#define		TUSB_INT_MASK_RESERVED_17		(0x3fff << 17)
+#define		TUSB_INT_MASK_RESERVED_13		(1 << 13)
+#define		TUSB_INT_MASK_RESERVED_8		(0xf << 8)
+#define		TUSB_INT_SRC_RESERVED_26		(0x1f << 26)
+#define		TUSB_INT_SRC_RESERVED_18		(0x3f << 18)
+#define		TUSB_INT_SRC_RESERVED_10		(0x03 << 10)
+
+/* Reserved bits for NOR flash interrupt mask and clear register */
+#define		TUSB_INT_MASK_RESERVED_BITS	(TUSB_INT_MASK_RESERVED_17 | \
+						TUSB_INT_MASK_RESERVED_13 | \
+						TUSB_INT_MASK_RESERVED_8)
+
+/* Reserved bits for NOR flash interrupt status register */
+#define		TUSB_INT_SRC_RESERVED_BITS	(TUSB_INT_SRC_RESERVED_26 | \
+						TUSB_INT_SRC_RESERVED_18 | \
+						TUSB_INT_SRC_RESERVED_10)
+
+#define TUSB_GPIO_REV			(TUSB_SYS_REG_BASE + 0x080)
+#define TUSB_GPIO_CONF			(TUSB_SYS_REG_BASE + 0x084)
+#define TUSB_DMA_CTRL_REV		(TUSB_SYS_REG_BASE + 0x100)
+#define TUSB_DMA_REQ_CONF		(TUSB_SYS_REG_BASE + 0x104)
+#define TUSB_EP0_CONF			(TUSB_SYS_REG_BASE + 0x108)
+#define TUSB_DMA_EP_MAP			(TUSB_SYS_REG_BASE + 0x148)
+
+/* Offsets from each ep base register */
+#define TUSB_EP_TX_OFFSET		0x10c	/* EP_IN in docs */
+#define TUSB_EP_RX_OFFSET		0x14c	/* EP_OUT in docs */
+#define TUSB_EP_MAX_PACKET_SIZE_OFFSET	0x188
+
+#define TUSB_WAIT_COUNT			(TUSB_SYS_REG_BASE + 0x1c8)
+#define TUSB_SCRATCH_PAD		(TUSB_SYS_REG_BASE + 0x1c4)
+#define TUSB_PROD_TEST_RESET		(TUSB_SYS_REG_BASE + 0x1d8)
+
+/* Device System & Control register bitfields */
+#define TUSB_INT_CTRL_CONF_INT_RELCYC(v)	(((v) & 0x7) << 18)
+#define TUSB_INT_CTRL_CONF_INT_POLARITY		(1 << 17)
+#define TUSB_INT_CTRL_CONF_INT_MODE		(1 << 16)
+#define TUSB_GPIO_CONF_DMAREQ(v)		(((v) & 0x3f) << 24)
+#define TUSB_DMA_REQ_CONF_BURST_SIZE(v)		(((v) & 3) << 26)
+#define TUSB_DMA_REQ_CONF_DMA_REQ_EN(v)		(((v) & 0x3f) << 20)
+#define TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(v)	(((v) & 0xf) << 16)
+#define TUSB_EP0_CONFIG_SW_EN			(1 << 8)
+#define TUSB_EP0_CONFIG_DIR_TX			(1 << 7)
+#define TUSB_EP0_CONFIG_XFR_SIZE(v)		((v) & 0x7f)
+#define TUSB_EP_CONFIG_SW_EN			(1 << 31)
+#define TUSB_EP_CONFIG_XFR_SIZE(v)		((v) & 0x7fffffff)
+#define TUSB_PROD_TEST_RESET_VAL		0xa596
+#define TUSB_EP_FIFO(ep)			(TUSB_FIFO_BASE + (ep) * 0x20)
+
+#define TUSB_DIDR1_LO				(TUSB_SYS_REG_BASE + 0x1f8)
+#define TUSB_DIDR1_HI				(TUSB_SYS_REG_BASE + 0x1fc)
+#define		TUSB_DIDR1_HI_CHIP_REV(v)		(((v) >> 17) & 0xf)
+#define			TUSB_DIDR1_HI_REV_20		0
+#define			TUSB_DIDR1_HI_REV_30		1
+#define			TUSB_DIDR1_HI_REV_31		2
+
+#define TUSB_REV_10	0x10
+#define TUSB_REV_20	0x20
+#define TUSB_REV_30	0x30
+#define TUSB_REV_31	0x31
+
+/*----------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USB_TUSB6010
+
+/* configuration parameters specific to this silicon */
+
+/* Number of Tx endpoints. Legal values are 1 - 16 (this value includes EP0) */
+#define MUSB_C_NUM_EPT 16
+
+/* Number of Rx endpoints. Legal values are 1 - 16 (this value includes EP0) */
+#define MUSB_C_NUM_EPR 16
+
+/* Endpoint 1 to 15 direction types. C_EP1_DEF is defined if either Tx endpoint
+ * 1 or Rx endpoint 1 are used.
+ */
+#define MUSB_C_EP1_DEF
+
+/* C_EP1_TX_DEF is defined if Tx endpoint 1 is used */
+#define MUSB_C_EP1_TX_DEF
+
+/* C_EP1_RX_DEF is defined if Rx endpoint 1 is used */
+#define MUSB_C_EP1_RX_DEF
+
+/* C_EP1_TOR_DEF is defined if Tx endpoint 1 and Rx endpoint 1 share a FIFO */
+/* #define C_EP1_TOR_DEF */
+
+/* C_EP1_TAR_DEF is defined if both Tx endpoint 1 and Rx endpoint 1 are used
+ * and do not share a FIFO.
+ */
+#define MUSB_C_EP1_TAR_DEF
+
+/* Similarly for all other used endpoints */
+#define MUSB_C_EP2_DEF
+#define MUSB_C_EP2_TX_DEF
+#define MUSB_C_EP2_RX_DEF
+#define MUSB_C_EP2_TAR_DEF
+#define MUSB_C_EP3_DEF
+#define MUSB_C_EP3_TX_DEF
+#define MUSB_C_EP3_RX_DEF
+#define MUSB_C_EP3_TAR_DEF
+#define MUSB_C_EP4_DEF
+#define MUSB_C_EP4_TX_DEF
+#define MUSB_C_EP4_RX_DEF
+#define MUSB_C_EP4_TAR_DEF
+
+/* Endpoint 1 to 15 FIFO address bits. Legal values are 3 to 13 - corresponding
+ * to FIFO sizes of 8 to 8192 bytes. If an Tx endpoint shares a FIFO with an Rx
+ * endpoint then the Rx FIFO size must be the same as the Tx FIFO size. All
+ * endpoints 1 to 15 must be defined, unused endpoints should be set to 2.
+ */
+#define MUSB_C_EP1T_BITS 5
+#define MUSB_C_EP1R_BITS 5
+#define MUSB_C_EP2T_BITS 5
+#define MUSB_C_EP2R_BITS 5
+#define MUSB_C_EP3T_BITS 3
+#define MUSB_C_EP3R_BITS 3
+#define MUSB_C_EP4T_BITS 3
+#define MUSB_C_EP4R_BITS 3
+
+#define MUSB_C_EP5T_BITS 2
+#define MUSB_C_EP5R_BITS 2
+#define MUSB_C_EP6T_BITS 2
+#define MUSB_C_EP6R_BITS 2
+#define MUSB_C_EP7T_BITS 2
+#define MUSB_C_EP7R_BITS 2
+#define MUSB_C_EP8T_BITS 2
+#define MUSB_C_EP8R_BITS 2
+#define MUSB_C_EP9T_BITS 2
+#define MUSB_C_EP9R_BITS 2
+#define MUSB_C_EP10T_BITS 2
+#define MUSB_C_EP10R_BITS 2
+#define MUSB_C_EP11T_BITS 2
+#define MUSB_C_EP11R_BITS 2
+#define MUSB_C_EP12T_BITS 2
+#define MUSB_C_EP12R_BITS 2
+#define MUSB_C_EP13T_BITS 2
+#define MUSB_C_EP13R_BITS 2
+#define MUSB_C_EP14T_BITS 2
+#define MUSB_C_EP14R_BITS 2
+#define MUSB_C_EP15T_BITS 2
+#define MUSB_C_EP15R_BITS 2
+
+/* Define the following constant if the USB2.0 Transceiver Macrocell data width
+ * is 16-bits.
+ */
+/* #define C_UTM_16 */
+
+/* Define this constant if the CPU uses big-endian byte ordering. */
+/* #define C_BIGEND */
+
+/* Define the following constant if any Tx endpoint is required to support
+ * multiple bulk packets.
+ */
+/* #define C_MP_TX */
+
+/* Define the following constant if any Rx endpoint is required to support
+ * multiple bulk packets.
+ */
+/* #define C_MP_RX */
+
+/* Define the following constant if any Tx endpoint is required to support high
+ * bandwidth ISO.
+ */
+/* #define C_HB_TX */
+
+/* Define the following constant if any Rx endpoint is required to support high
+ * bandwidth ISO.
+ */
+/* #define C_HB_RX */
+
+/* Define the following constant if software connect/disconnect control is
+ * required.
+ */
+#define MUSB_C_SOFT_CON
+
+/* Define the following constant if Vendor Control Registers are required. */
+/* #define C_VEND_REG */
+
+/* Vendor control register widths. */
+#define MUSB_C_VCTL_BITS 4
+#define MUSB_C_VSTAT_BITS 8
+
+/* Define the following constant to include a DMA controller. */
+/* #define C_DMA */
+
+/* Define the following constant if 2 or more DMA channels are required. */
+/* #define C_DMA2 */
+
+/* Define the following constant if 3 or more DMA channels are required. */
+/* #define C_DMA3 */
+
+/* Define the following constant if 4 or more DMA channels are required. */
+/* #define C_DMA4 */
+
+/* Define the following constant if 5 or more DMA channels are required. */
+/* #define C_DMA5 */
+
+/* Define the following constant if 6 or more DMA channels are required. */
+/* #define C_DMA6 */
+
+/* Define the following constant if 7 or more DMA channels are required. */
+/* #define C_DMA7 */
+
+/* Define the following constant if 8 or more DMA channels are required. */
+/* #define C_DMA8 */
+
+/* Enable Dynamic FIFO Sizing */
+#define MUSB_C_DYNFIFO_DEF
+
+/* Derived constants. The following constants are derived from the previous
+ * configuration constants
+ */
+
+/* Total number of endpoints. Legal values are 2 - 16. This must be equal to
+ * the larger of C_NUM_EPT, C_NUM_EPR
+ */
+/* #define MUSB_C_NUM_EPS 5 */
+
+/* C_EPMAX_BITS is equal to the largest endpoint FIFO word address bits */
+#define MUSB_C_EPMAX_BITS 11
+
+/* C_RAM_BITS is the number of address bits required to address the RAM (32-bit
+ * addresses).  It is defined as log2 of the sum of 2** of all the endpoint FIFO
+ * dword address bits (rounded up).
+ */
+#define MUSB_C_RAM_BITS 12
+
+#endif /* CONFIG_USB_TUSB6010 */
+
+#endif /* __TUSB6010_H__ */
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
new file mode 100644
index 000000000000..52f7f29cebda
--- /dev/null
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -0,0 +1,719 @@
+/*
+ * TUSB6010 USB 2.0 OTG Dual Role controller OMAP DMA interface
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/mux.h>
+
+#include "musb_core.h"
+
+#define to_chdat(c)		((struct tusb_omap_dma_ch *)(c)->private_data)
+
+#define MAX_DMAREQ		5	/* REVISIT: Really 6, but req5 not OK */
+
+struct tusb_omap_dma_ch {
+	struct musb		*musb;
+	void __iomem		*tbase;
+	unsigned long		phys_offset;
+	int			epnum;
+	u8			tx;
+	struct musb_hw_ep	*hw_ep;
+
+	int			ch;
+	s8			dmareq;
+	s8			sync_dev;
+
+	struct tusb_omap_dma	*tusb_dma;
+
+	void __iomem		*dma_addr;
+
+	u32			len;
+	u16			packet_sz;
+	u16			transfer_packet_sz;
+	u32			transfer_len;
+	u32			completed_len;
+};
+
+struct tusb_omap_dma {
+	struct dma_controller		controller;
+	struct musb			*musb;
+	void __iomem			*tbase;
+
+	int				ch;
+	s8				dmareq;
+	s8				sync_dev;
+	unsigned			multichannel:1;
+};
+
+static int tusb_omap_dma_start(struct dma_controller *c)
+{
+	struct tusb_omap_dma	*tusb_dma;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+
+	/* DBG(3, "ep%i ch: %i\n", chdat->epnum, chdat->ch); */
+
+	return 0;
+}
+
+static int tusb_omap_dma_stop(struct dma_controller *c)
+{
+	struct tusb_omap_dma	*tusb_dma;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+
+	/* DBG(3, "ep%i ch: %i\n", chdat->epnum, chdat->ch); */
+
+	return 0;
+}
+
+/*
+ * Allocate dmareq0 to the current channel unless it's already taken
+ */
+static inline int tusb_omap_use_shared_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+
+	if (reg != 0) {
+		DBG(3, "ep%i dmareq0 is busy for ep%i\n",
+			chdat->epnum, reg & 0xf);
+		return -EAGAIN;
+	}
+
+	if (chdat->tx)
+		reg = (1 << 4) | chdat->epnum;
+	else
+		reg = chdat->epnum;
+
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+	return 0;
+}
+
+static inline void tusb_omap_free_shared_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+
+	if ((reg & 0xf) != chdat->epnum) {
+		printk(KERN_ERR "ep%i trying to release dmareq0 for ep%i\n",
+			chdat->epnum, reg & 0xf);
+		return;
+	}
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, 0);
+}
+
+/*
+ * See also musb_dma_completion in plat_uds.c and musb_g_[tx|rx]() in
+ * musb_gadget.c.
+ */
+static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data)
+{
+	struct dma_channel	*channel = (struct dma_channel *)data;
+	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
+	struct tusb_omap_dma	*tusb_dma = chdat->tusb_dma;
+	struct musb		*musb = chdat->musb;
+	struct musb_hw_ep	*hw_ep = chdat->hw_ep;
+	void __iomem		*ep_conf = hw_ep->conf;
+	void __iomem		*mbase = musb->mregs;
+	unsigned long		remaining, flags, pio;
+	int			ch;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (tusb_dma->multichannel)
+		ch = chdat->ch;
+	else
+		ch = tusb_dma->ch;
+
+	if (ch_status != OMAP_DMA_BLOCK_IRQ)
+		printk(KERN_ERR "TUSB DMA error status: %i\n", ch_status);
+
+	DBG(3, "ep%i %s dma callback ch: %i status: %x\n",
+		chdat->epnum, chdat->tx ? "tx" : "rx",
+		ch, ch_status);
+
+	if (chdat->tx)
+		remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET);
+	else
+		remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET);
+
+	remaining = TUSB_EP_CONFIG_XFR_SIZE(remaining);
+
+	/* HW issue #10: XFR_SIZE may get corrupt on DMA (both async & sync) */
+	if (unlikely(remaining > chdat->transfer_len)) {
+		DBG(2, "Corrupt %s dma ch%i XFR_SIZE: 0x%08lx\n",
+			chdat->tx ? "tx" : "rx", chdat->ch,
+			remaining);
+		remaining = 0;
+	}
+
+	channel->actual_len = chdat->transfer_len - remaining;
+	pio = chdat->len - channel->actual_len;
+
+	DBG(3, "DMA remaining %lu/%u\n", remaining, chdat->transfer_len);
+
+	/* Transfer remaining 1 - 31 bytes */
+	if (pio > 0 && pio < 32) {
+		u8	*buf;
+
+		DBG(3, "Using PIO for remaining %lu bytes\n", pio);
+		buf = phys_to_virt((u32)chdat->dma_addr) + chdat->transfer_len;
+		if (chdat->tx) {
+			dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
+					chdat->transfer_len, DMA_TO_DEVICE);
+			musb_write_fifo(hw_ep, pio, buf);
+		} else {
+			musb_read_fifo(hw_ep, pio, buf);
+			dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
+					chdat->transfer_len, DMA_FROM_DEVICE);
+		}
+		channel->actual_len += pio;
+	}
+
+	if (!tusb_dma->multichannel)
+		tusb_omap_free_shared_dmareq(chdat);
+
+	channel->status = MUSB_DMA_STATUS_FREE;
+
+	/* Handle only RX callbacks here. TX callbacks must be handled based
+	 * on the TUSB DMA status interrupt.
+	 * REVISIT: Use both TUSB DMA status interrupt and OMAP DMA callback
+	 * interrupt for RX and TX.
+	 */
+	if (!chdat->tx)
+		musb_dma_completion(musb, chdat->epnum, chdat->tx);
+
+	/* We must terminate short tx transfers manually by setting TXPKTRDY.
+	 * REVISIT: This same problem may occur with other MUSB dma as well.
+	 * Easy to test with g_ether by pinging the MUSB board with ping -s54.
+	 */
+	if ((chdat->transfer_len < chdat->packet_sz)
+			|| (chdat->transfer_len % chdat->packet_sz != 0)) {
+		u16	csr;
+
+		if (chdat->tx) {
+			DBG(3, "terminating short tx packet\n");
+			musb_ep_select(mbase, chdat->epnum);
+			csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
+			csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY
+				| MUSB_TXCSR_P_WZC_BITS;
+			musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
+		}
+	}
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
+				u8 rndis_mode, dma_addr_t dma_addr, u32 len)
+{
+	struct tusb_omap_dma_ch		*chdat = to_chdat(channel);
+	struct tusb_omap_dma		*tusb_dma = chdat->tusb_dma;
+	struct musb			*musb = chdat->musb;
+	struct musb_hw_ep		*hw_ep = chdat->hw_ep;
+	void __iomem			*mbase = musb->mregs;
+	void __iomem			*ep_conf = hw_ep->conf;
+	dma_addr_t			fifo = hw_ep->fifo_sync;
+	struct omap_dma_channel_params	dma_params;
+	u32				dma_remaining;
+	int				src_burst, dst_burst;
+	u16				csr;
+	int				ch;
+	s8				dmareq;
+	s8				sync_dev;
+
+	if (unlikely(dma_addr & 0x1) || (len < 32) || (len > packet_sz))
+		return false;
+
+	/*
+	 * HW issue #10: Async dma will eventually corrupt the XFR_SIZE
+	 * register which will cause missed DMA interrupt. We could try to
+	 * use a timer for the callback, but it is unsafe as the XFR_SIZE
+	 * register is corrupt, and we won't know if the DMA worked.
+	 */
+	if (dma_addr & 0x2)
+		return false;
+
+	/*
+	 * Because of HW issue #10, it seems like mixing sync DMA and async
+	 * PIO access can confuse the DMA. Make sure XFR_SIZE is reset before
+	 * using the channel for DMA.
+	 */
+	if (chdat->tx)
+		dma_remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET);
+	else
+		dma_remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET);
+
+	dma_remaining = TUSB_EP_CONFIG_XFR_SIZE(dma_remaining);
+	if (dma_remaining) {
+		DBG(2, "Busy %s dma ch%i, not using: %08x\n",
+			chdat->tx ? "tx" : "rx", chdat->ch,
+			dma_remaining);
+		return false;
+	}
+
+	chdat->transfer_len = len & ~0x1f;
+
+	if (len < packet_sz)
+		chdat->transfer_packet_sz = chdat->transfer_len;
+	else
+		chdat->transfer_packet_sz = packet_sz;
+
+	if (tusb_dma->multichannel) {
+		ch = chdat->ch;
+		dmareq = chdat->dmareq;
+		sync_dev = chdat->sync_dev;
+	} else {
+		if (tusb_omap_use_shared_dmareq(chdat) != 0) {
+			DBG(3, "could not get dma for ep%i\n", chdat->epnum);
+			return false;
+		}
+		if (tusb_dma->ch < 0) {
+			/* REVISIT: This should get blocked earlier, happens
+			 * with MSC ErrorRecoveryTest
+			 */
+			WARN_ON(1);
+			return false;
+		}
+
+		ch = tusb_dma->ch;
+		dmareq = tusb_dma->dmareq;
+		sync_dev = tusb_dma->sync_dev;
+		omap_set_dma_callback(ch, tusb_omap_dma_cb, channel);
+	}
+
+	chdat->packet_sz = packet_sz;
+	chdat->len = len;
+	channel->actual_len = 0;
+	chdat->dma_addr = (void __iomem *)dma_addr;
+	channel->status = MUSB_DMA_STATUS_BUSY;
+
+	/* Since we're recycling dma areas, we need to clean or invalidate */
+	if (chdat->tx)
+		dma_cache_maint(phys_to_virt(dma_addr), len, DMA_TO_DEVICE);
+	else
+		dma_cache_maint(phys_to_virt(dma_addr), len, DMA_FROM_DEVICE);
+
+	/* Use 16-bit transfer if dma_addr is not 32-bit aligned */
+	if ((dma_addr & 0x3) == 0) {
+		dma_params.data_type = OMAP_DMA_DATA_TYPE_S32;
+		dma_params.elem_count = 8;		/* Elements in frame */
+	} else {
+		dma_params.data_type = OMAP_DMA_DATA_TYPE_S16;
+		dma_params.elem_count = 16;		/* Elements in frame */
+		fifo = hw_ep->fifo_async;
+	}
+
+	dma_params.frame_count	= chdat->transfer_len / 32; /* Burst sz frame */
+
+	DBG(3, "ep%i %s dma ch%i dma: %08x len: %u(%u) packet_sz: %i(%i)\n",
+		chdat->epnum, chdat->tx ? "tx" : "rx",
+		ch, dma_addr, chdat->transfer_len, len,
+		chdat->transfer_packet_sz, packet_sz);
+
+	/*
+	 * Prepare omap DMA for transfer
+	 */
+	if (chdat->tx) {
+		dma_params.src_amode	= OMAP_DMA_AMODE_POST_INC;
+		dma_params.src_start	= (unsigned long)dma_addr;
+		dma_params.src_ei	= 0;
+		dma_params.src_fi	= 0;
+
+		dma_params.dst_amode	= OMAP_DMA_AMODE_DOUBLE_IDX;
+		dma_params.dst_start	= (unsigned long)fifo;
+		dma_params.dst_ei	= 1;
+		dma_params.dst_fi	= -31;	/* Loop 32 byte window */
+
+		dma_params.trigger	= sync_dev;
+		dma_params.sync_mode	= OMAP_DMA_SYNC_FRAME;
+		dma_params.src_or_dst_synch	= 0;	/* Dest sync */
+
+		src_burst = OMAP_DMA_DATA_BURST_16;	/* 16x32 read */
+		dst_burst = OMAP_DMA_DATA_BURST_8;	/* 8x32 write */
+	} else {
+		dma_params.src_amode	= OMAP_DMA_AMODE_DOUBLE_IDX;
+		dma_params.src_start	= (unsigned long)fifo;
+		dma_params.src_ei	= 1;
+		dma_params.src_fi	= -31;	/* Loop 32 byte window */
+
+		dma_params.dst_amode	= OMAP_DMA_AMODE_POST_INC;
+		dma_params.dst_start	= (unsigned long)dma_addr;
+		dma_params.dst_ei	= 0;
+		dma_params.dst_fi	= 0;
+
+		dma_params.trigger	= sync_dev;
+		dma_params.sync_mode	= OMAP_DMA_SYNC_FRAME;
+		dma_params.src_or_dst_synch	= 1;	/* Source sync */
+
+		src_burst = OMAP_DMA_DATA_BURST_8;	/* 8x32 read */
+		dst_burst = OMAP_DMA_DATA_BURST_16;	/* 16x32 write */
+	}
+
+	DBG(3, "ep%i %s using %i-bit %s dma from 0x%08lx to 0x%08lx\n",
+		chdat->epnum, chdat->tx ? "tx" : "rx",
+		(dma_params.data_type == OMAP_DMA_DATA_TYPE_S32) ? 32 : 16,
+		((dma_addr & 0x3) == 0) ? "sync" : "async",
+		dma_params.src_start, dma_params.dst_start);
+
+	omap_set_dma_params(ch, &dma_params);
+	omap_set_dma_src_burst_mode(ch, src_burst);
+	omap_set_dma_dest_burst_mode(ch, dst_burst);
+	omap_set_dma_write_mode(ch, OMAP_DMA_WRITE_LAST_NON_POSTED);
+
+	/*
+	 * Prepare MUSB for DMA transfer
+	 */
+	if (chdat->tx) {
+		musb_ep_select(mbase, chdat->epnum);
+		csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
+		csr |= (MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB
+			| MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+		csr &= ~MUSB_TXCSR_P_UNDERRUN;
+		musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
+	} else {
+		musb_ep_select(mbase, chdat->epnum);
+		csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_DMAENAB;
+		csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAMODE);
+		musb_writew(hw_ep->regs, MUSB_RXCSR,
+			csr | MUSB_RXCSR_P_WZC_BITS);
+	}
+
+	/*
+	 * Start DMA transfer
+	 */
+	omap_start_dma(ch);
+
+	if (chdat->tx) {
+		/* Send transfer_packet_sz packets at a time */
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
+			chdat->transfer_packet_sz);
+
+		musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
+	} else {
+		/* Receive transfer_packet_sz packets at a time */
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
+			chdat->transfer_packet_sz << 16);
+
+		musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
+	}
+
+	return true;
+}
+
+static int tusb_omap_dma_abort(struct dma_channel *channel)
+{
+	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
+	struct tusb_omap_dma	*tusb_dma = chdat->tusb_dma;
+
+	if (!tusb_dma->multichannel) {
+		if (tusb_dma->ch >= 0) {
+			omap_stop_dma(tusb_dma->ch);
+			omap_free_dma(tusb_dma->ch);
+			tusb_dma->ch = -1;
+		}
+
+		tusb_dma->dmareq = -1;
+		tusb_dma->sync_dev = -1;
+	}
+
+	channel->status = MUSB_DMA_STATUS_FREE;
+
+	return 0;
+}
+
+static inline int tusb_omap_dma_allocate_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+	int		i, dmareq_nr = -1;
+
+	const int sync_dev[6] = {
+		OMAP24XX_DMA_EXT_DMAREQ0,
+		OMAP24XX_DMA_EXT_DMAREQ1,
+		OMAP242X_DMA_EXT_DMAREQ2,
+		OMAP242X_DMA_EXT_DMAREQ3,
+		OMAP242X_DMA_EXT_DMAREQ4,
+		OMAP242X_DMA_EXT_DMAREQ5,
+	};
+
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		int cur = (reg & (0xf << (i * 5))) >> (i * 5);
+		if (cur == 0) {
+			dmareq_nr = i;
+			break;
+		}
+	}
+
+	if (dmareq_nr == -1)
+		return -EAGAIN;
+
+	reg |= (chdat->epnum << (dmareq_nr * 5));
+	if (chdat->tx)
+		reg |= ((1 << 4) << (dmareq_nr * 5));
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+	chdat->dmareq = dmareq_nr;
+	chdat->sync_dev = sync_dev[chdat->dmareq];
+
+	return 0;
+}
+
+static inline void tusb_omap_dma_free_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32 reg;
+
+	if (!chdat || chdat->dmareq < 0)
+		return;
+
+	reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+	reg &= ~(0x1f << (chdat->dmareq * 5));
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+	chdat->dmareq = -1;
+	chdat->sync_dev = -1;
+}
+
+static struct dma_channel *dma_channel_pool[MAX_DMAREQ];
+
+static struct dma_channel *
+tusb_omap_dma_allocate(struct dma_controller *c,
+		struct musb_hw_ep *hw_ep,
+		u8 tx)
+{
+	int ret, i;
+	const char		*dev_name;
+	struct tusb_omap_dma	*tusb_dma;
+	struct musb		*musb;
+	void __iomem		*tbase;
+	struct dma_channel	*channel = NULL;
+	struct tusb_omap_dma_ch	*chdat = NULL;
+	u32			reg;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+	musb = tusb_dma->musb;
+	tbase = musb->ctrl_base;
+
+	reg = musb_readl(tbase, TUSB_DMA_INT_MASK);
+	if (tx)
+		reg &= ~(1 << hw_ep->epnum);
+	else
+		reg &= ~(1 << (hw_ep->epnum + 15));
+	musb_writel(tbase, TUSB_DMA_INT_MASK, reg);
+
+	/* REVISIT: Why does dmareq5 not work? */
+	if (hw_ep->epnum == 0) {
+		DBG(3, "Not allowing DMA for ep0 %s\n", tx ? "tx" : "rx");
+		return NULL;
+	}
+
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		struct dma_channel *ch = dma_channel_pool[i];
+		if (ch->status == MUSB_DMA_STATUS_UNKNOWN) {
+			ch->status = MUSB_DMA_STATUS_FREE;
+			channel = ch;
+			chdat = ch->private_data;
+			break;
+		}
+	}
+
+	if (!channel)
+		return NULL;
+
+	if (tx) {
+		chdat->tx = 1;
+		dev_name = "TUSB transmit";
+	} else {
+		chdat->tx = 0;
+		dev_name = "TUSB receive";
+	}
+
+	chdat->musb = tusb_dma->musb;
+	chdat->tbase = tusb_dma->tbase;
+	chdat->hw_ep = hw_ep;
+	chdat->epnum = hw_ep->epnum;
+	chdat->dmareq = -1;
+	chdat->completed_len = 0;
+	chdat->tusb_dma = tusb_dma;
+
+	channel->max_len = 0x7fffffff;
+	channel->desired_mode = 0;
+	channel->actual_len = 0;
+
+	if (tusb_dma->multichannel) {
+		ret = tusb_omap_dma_allocate_dmareq(chdat);
+		if (ret != 0)
+			goto free_dmareq;
+
+		ret = omap_request_dma(chdat->sync_dev, dev_name,
+				tusb_omap_dma_cb, channel, &chdat->ch);
+		if (ret != 0)
+			goto free_dmareq;
+	} else if (tusb_dma->ch == -1) {
+		tusb_dma->dmareq = 0;
+		tusb_dma->sync_dev = OMAP24XX_DMA_EXT_DMAREQ0;
+
+		/* Callback data gets set later in the shared dmareq case */
+		ret = omap_request_dma(tusb_dma->sync_dev, "TUSB shared",
+				tusb_omap_dma_cb, NULL, &tusb_dma->ch);
+		if (ret != 0)
+			goto free_dmareq;
+
+		chdat->dmareq = -1;
+		chdat->ch = -1;
+	}
+
+	DBG(3, "ep%i %s dma: %s dma%i dmareq%i sync%i\n",
+		chdat->epnum,
+		chdat->tx ? "tx" : "rx",
+		chdat->ch >= 0 ? "dedicated" : "shared",
+		chdat->ch >= 0 ? chdat->ch : tusb_dma->ch,
+		chdat->dmareq >= 0 ? chdat->dmareq : tusb_dma->dmareq,
+		chdat->sync_dev >= 0 ? chdat->sync_dev : tusb_dma->sync_dev);
+
+	return channel;
+
+free_dmareq:
+	tusb_omap_dma_free_dmareq(chdat);
+
+	DBG(3, "ep%i: Could not get a DMA channel\n", chdat->epnum);
+	channel->status = MUSB_DMA_STATUS_UNKNOWN;
+
+	return NULL;
+}
+
+static void tusb_omap_dma_release(struct dma_channel *channel)
+{
+	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
+	struct musb		*musb = chdat->musb;
+	void __iomem		*tbase = musb->ctrl_base;
+	u32			reg;
+
+	DBG(3, "ep%i ch%i\n", chdat->epnum, chdat->ch);
+
+	reg = musb_readl(tbase, TUSB_DMA_INT_MASK);
+	if (chdat->tx)
+		reg |= (1 << chdat->epnum);
+	else
+		reg |= (1 << (chdat->epnum + 15));
+	musb_writel(tbase, TUSB_DMA_INT_MASK, reg);
+
+	reg = musb_readl(tbase, TUSB_DMA_INT_CLEAR);
+	if (chdat->tx)
+		reg |= (1 << chdat->epnum);
+	else
+		reg |= (1 << (chdat->epnum + 15));
+	musb_writel(tbase, TUSB_DMA_INT_CLEAR, reg);
+
+	channel->status = MUSB_DMA_STATUS_UNKNOWN;
+
+	if (chdat->ch >= 0) {
+		omap_stop_dma(chdat->ch);
+		omap_free_dma(chdat->ch);
+		chdat->ch = -1;
+	}
+
+	if (chdat->dmareq >= 0)
+		tusb_omap_dma_free_dmareq(chdat);
+
+	channel = NULL;
+}
+
+void dma_controller_destroy(struct dma_controller *c)
+{
+	struct tusb_omap_dma	*tusb_dma;
+	int			i;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		struct dma_channel *ch = dma_channel_pool[i];
+		if (ch) {
+			kfree(ch->private_data);
+			kfree(ch);
+		}
+	}
+
+	if (!tusb_dma->multichannel && tusb_dma && tusb_dma->ch >= 0)
+		omap_free_dma(tusb_dma->ch);
+
+	kfree(tusb_dma);
+}
+
+struct dma_controller *__init
+dma_controller_create(struct musb *musb, void __iomem *base)
+{
+	void __iomem		*tbase = musb->ctrl_base;
+	struct tusb_omap_dma	*tusb_dma;
+	int			i;
+
+	/* REVISIT: Get dmareq lines used from board-*.c */
+
+	musb_writel(musb->ctrl_base, TUSB_DMA_INT_MASK, 0x7fffffff);
+	musb_writel(musb->ctrl_base, TUSB_DMA_EP_MAP, 0);
+
+	musb_writel(tbase, TUSB_DMA_REQ_CONF,
+		TUSB_DMA_REQ_CONF_BURST_SIZE(2)
+		| TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f)
+		| TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2));
+
+	tusb_dma = kzalloc(sizeof(struct tusb_omap_dma), GFP_KERNEL);
+	if (!tusb_dma)
+		goto cleanup;
+
+	tusb_dma->musb = musb;
+	tusb_dma->tbase = musb->ctrl_base;
+
+	tusb_dma->ch = -1;
+	tusb_dma->dmareq = -1;
+	tusb_dma->sync_dev = -1;
+
+	tusb_dma->controller.start = tusb_omap_dma_start;
+	tusb_dma->controller.stop = tusb_omap_dma_stop;
+	tusb_dma->controller.channel_alloc = tusb_omap_dma_allocate;
+	tusb_dma->controller.channel_release = tusb_omap_dma_release;
+	tusb_dma->controller.channel_program = tusb_omap_dma_program;
+	tusb_dma->controller.channel_abort = tusb_omap_dma_abort;
+
+	if (tusb_get_revision(musb) >= TUSB_REV_30)
+		tusb_dma->multichannel = 1;
+
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		struct dma_channel	*ch;
+		struct tusb_omap_dma_ch	*chdat;
+
+		ch = kzalloc(sizeof(struct dma_channel), GFP_KERNEL);
+		if (!ch)
+			goto cleanup;
+
+		dma_channel_pool[i] = ch;
+
+		chdat = kzalloc(sizeof(struct tusb_omap_dma_ch), GFP_KERNEL);
+		if (!chdat)
+			goto cleanup;
+
+		ch->status = MUSB_DMA_STATUS_UNKNOWN;
+		ch->private_data = chdat;
+	}
+
+	return &tusb_dma->controller;
+
+cleanup:
+	dma_controller_destroy(&tusb_dma->controller);
+
+	return NULL;
+}