diff options
author | Ingo Molnar <mingo@kernel.org> | 2020-10-09 08:55:17 +0200 |
---|---|---|
committer | Ingo Molnar <mingo@kernel.org> | 2020-10-09 08:55:17 +0200 |
commit | e705d397965811ac528d7213b42d74ffe43caf38 (patch) | |
tree | 8a5bbe85cc42e64992b97859976e307027f83e33 /drivers/usb | |
parent | d89d5f855f84ccf3f7e648813b4bb95c780bd7cd (diff) | |
parent | baffd723e44dc3d7f84f0b8f1fe1ece00ddd2710 (diff) |
Merge branch 'locking/urgent' into locking/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Diffstat (limited to 'drivers/usb')
57 files changed, 530 insertions, 298 deletions
diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c index f7f6229082ca..60f4711717d2 100644 --- a/drivers/usb/c67x00/c67x00-sched.c +++ b/drivers/usb/c67x00/c67x00-sched.c @@ -710,7 +710,8 @@ static int c67x00_add_ctrl_urb(struct c67x00_hcd *c67x00, struct urb *urb) if (ret) return ret; break; - } /* else fallthrough */ + } + fallthrough; case STATUS_STAGE: pid = !usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN; ret = c67x00_create_td(c67x00, urb, NULL, 0, pid, 1, diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 991786876dbb..7f6f3ab5b8a6 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -378,21 +378,19 @@ static void acm_ctrl_irq(struct urb *urb) if (current_size < expected_size) { /* notification is transmitted fragmented, reassemble */ if (acm->nb_size < expected_size) { - if (acm->nb_size) { - kfree(acm->notification_buffer); - acm->nb_size = 0; - } + u8 *new_buffer; alloc_size = roundup_pow_of_two(expected_size); - /* - * kmalloc ensures a valid notification_buffer after a - * use of kfree in case the previous allocation was too - * small. Final freeing is done on disconnect. - */ - acm->notification_buffer = - kmalloc(alloc_size, GFP_ATOMIC); - if (!acm->notification_buffer) + /* Final freeing is done on disconnect. */ + new_buffer = krealloc(acm->notification_buffer, + alloc_size, GFP_ATOMIC); + if (!new_buffer) { + acm->nb_index = 0; goto exit; + } + + acm->notification_buffer = new_buffer; acm->nb_size = alloc_size; + dr = (struct usb_cdc_notification *)acm->notification_buffer; } copy_size = min(current_size, diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 084c48c5848f..67cbd42421be 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -827,6 +827,11 @@ static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, lo if (rv < 0) return rv; + if (!usblp->present) { + count = -ENODEV; + goto done; + } + if ((avail = usblp->rstatus) < 0) { printk(KERN_ERR "usblp%d: error %d reading from printer\n", usblp->minor, (int)avail); diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index f81606c6a35b..b351962279e4 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -269,8 +269,30 @@ static int usb_probe_device(struct device *dev) if (error) return error; + /* Probe the USB device with the driver in hand, but only + * defer to a generic driver in case the current USB + * device driver has an id_table or a match function; i.e., + * when the device driver was explicitly matched against + * a device. + * + * If the device driver does not have either of these, + * then we assume that it can bind to any device and is + * not truly a more specialized/non-generic driver, so a + * return value of -ENODEV should not force the device + * to be handled by the generic USB driver, as there + * can still be another, more specialized, device driver. + * + * This accommodates the usbip driver. + * + * TODO: What if, in the future, there are multiple + * specialized USB device drivers for a particular device? + * In such cases, there is a need to try all matching + * specialised device drivers prior to setting the + * use_generic_driver bit. + */ error = udriver->probe(udev); - if (error == -ENODEV && udriver != &usb_generic_driver) { + if (error == -ENODEV && udriver != &usb_generic_driver && + (udriver->id_table || udriver->match)) { udev->use_generic_driver = 1; return -EPROBE_DEFER; } @@ -831,14 +853,17 @@ static int usb_device_match(struct device *dev, struct device_driver *drv) udev = to_usb_device(dev); udrv = to_usb_device_driver(drv); - if (udrv->id_table && - usb_device_match_id(udev, udrv->id_table) != NULL) { - return 1; - } + if (udrv->id_table) + return usb_device_match_id(udev, udrv->id_table) != NULL; if (udrv->match) return udrv->match(udev); - return 0; + + /* If the device driver under consideration does not have a + * id_table or a match function, then let the driver's probe + * function decide. + */ + return 1; } else if (is_usb_interface(dev)) { struct usb_interface *intf; @@ -905,6 +930,28 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env) return 0; } +static int __usb_bus_reprobe_drivers(struct device *dev, void *data) +{ + struct usb_device_driver *new_udriver = data; + struct usb_device *udev; + int ret; + + /* Don't reprobe if current driver isn't usb_generic_driver */ + if (dev->driver != &usb_generic_driver.drvwrap.driver) + return 0; + + udev = to_usb_device(dev); + if (usb_device_match_id(udev, new_udriver->id_table) == NULL && + (!new_udriver->match || new_udriver->match(udev) == 0)) + return 0; + + ret = device_reprobe(dev); + if (ret && ret != -EPROBE_DEFER) + dev_err(dev, "Failed to reprobe device (error %d)\n", ret); + + return 0; +} + /** * usb_register_device_driver - register a USB device (not interface) driver * @new_udriver: USB operations for the device driver @@ -934,13 +981,20 @@ int usb_register_device_driver(struct usb_device_driver *new_udriver, retval = driver_register(&new_udriver->drvwrap.driver); - if (!retval) + if (!retval) { pr_info("%s: registered new device driver %s\n", usbcore_name, new_udriver->name); - else + /* + * Check whether any device could be better served with + * this new driver + */ + bus_for_each_dev(&usb_bus_type, NULL, new_udriver, + __usb_bus_reprobe_drivers); + } else { printk(KERN_ERR "%s: error %d registering device " " driver %s\n", usbcore_name, retval, new_udriver->name); + } return retval; } diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index b6f2d4b44754..2b2f1ab6e36a 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -205,8 +205,9 @@ static int __check_usb_generic(struct device_driver *drv, void *data) udrv = to_usb_device_driver(drv); if (udrv == &usb_generic_driver) return 0; - - return usb_device_match_id(udev, udrv->id_table) != NULL; + if (usb_device_match_id(udev, udrv->id_table) != NULL) + return 1; + return (udrv->match && udrv->match(udev)); } static bool usb_generic_driver_match(struct usb_device *udev) diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 4dc443aaef5c..ec0d6c50610c 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -315,11 +315,14 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_probe); void usb_hcd_pci_remove(struct pci_dev *dev) { struct usb_hcd *hcd; + int hcd_driver_flags; hcd = pci_get_drvdata(dev); if (!hcd) return; + hcd_driver_flags = hcd->driver->flags; + if (pci_dev_run_wake(dev)) pm_runtime_get_noresume(&dev->dev); @@ -347,7 +350,7 @@ void usb_hcd_pci_remove(struct pci_dev *dev) up_read(&companions_rwsem); } usb_put_hcd(hcd); - if ((hcd->driver->flags & HCD_MASK) < HCD_USB3) + if ((hcd_driver_flags & HCD_MASK) < HCD_USB3) pci_free_irq_vectors(dev); pci_disable_device(dev); } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 052d5accfe9b..5b768b80d1ee 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -727,7 +727,7 @@ static void hub_irq(struct urb *urb) if ((++hub->nerrors < 10) || hub->error) goto resubmit; hub->error = status; - /* FALL THROUGH */ + fallthrough; /* let hub_wq handle things */ case 0: /* we got data: port status changed */ diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 6197938dcc2d..ae1de9cc4b09 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1205,6 +1205,34 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf, } } +/* + * usb_disable_device_endpoints -- Disable all endpoints for a device + * @dev: the device whose endpoints are being disabled + * @skip_ep0: 0 to disable endpoint 0, 1 to skip it. + */ +static void usb_disable_device_endpoints(struct usb_device *dev, int skip_ep0) +{ + struct usb_hcd *hcd = bus_to_hcd(dev->bus); + int i; + + if (hcd->driver->check_bandwidth) { + /* First pass: Cancel URBs, leave endpoint pointers intact. */ + for (i = skip_ep0; i < 16; ++i) { + usb_disable_endpoint(dev, i, false); + usb_disable_endpoint(dev, i + USB_DIR_IN, false); + } + /* Remove endpoints from the host controller internal state */ + mutex_lock(hcd->bandwidth_mutex); + usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); + mutex_unlock(hcd->bandwidth_mutex); + } + /* Second pass: remove endpoint pointers */ + for (i = skip_ep0; i < 16; ++i) { + usb_disable_endpoint(dev, i, true); + usb_disable_endpoint(dev, i + USB_DIR_IN, true); + } +} + /** * usb_disable_device - Disable all the endpoints for a USB device * @dev: the device whose endpoints are being disabled @@ -1218,7 +1246,6 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf, void usb_disable_device(struct usb_device *dev, int skip_ep0) { int i; - struct usb_hcd *hcd = bus_to_hcd(dev->bus); /* getting rid of interfaces will disconnect * any drivers bound to them (a key side effect) @@ -1264,22 +1291,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__, skip_ep0 ? "non-ep0" : "all"); - if (hcd->driver->check_bandwidth) { - /* First pass: Cancel URBs, leave endpoint pointers intact. */ - for (i = skip_ep0; i < 16; ++i) { - usb_disable_endpoint(dev, i, false); - usb_disable_endpoint(dev, i + USB_DIR_IN, false); - } - /* Remove endpoints from the host controller internal state */ - mutex_lock(hcd->bandwidth_mutex); - usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); - mutex_unlock(hcd->bandwidth_mutex); - /* Second pass: remove endpoint pointers */ - } - for (i = skip_ep0; i < 16; ++i) { - usb_disable_endpoint(dev, i, true); - usb_disable_endpoint(dev, i + USB_DIR_IN, true); - } + + usb_disable_device_endpoints(dev, skip_ep0); } /** @@ -1522,6 +1535,9 @@ EXPORT_SYMBOL_GPL(usb_set_interface); * The caller must own the device lock. * * Return: Zero on success, else a negative error code. + * + * If this routine fails the device will probably be in an unusable state + * with endpoints disabled, and interfaces only partially enabled. */ int usb_reset_configuration(struct usb_device *dev) { @@ -1537,10 +1553,7 @@ int usb_reset_configuration(struct usb_device *dev) * calls during probe() are fine */ - for (i = 1; i < 16; ++i) { - usb_disable_endpoint(dev, i, true); - usb_disable_endpoint(dev, i + USB_DIR_IN, true); - } + usb_disable_device_endpoints(dev, 1); /* skip ep0*/ config = dev->actconfig; retval = 0; @@ -1553,34 +1566,10 @@ int usb_reset_configuration(struct usb_device *dev) mutex_unlock(hcd->bandwidth_mutex); return -ENOMEM; } - /* Make sure we have enough bandwidth for each alternate setting 0 */ - for (i = 0; i < config->desc.bNumInterfaces; i++) { - struct usb_interface *intf = config->interface[i]; - struct usb_host_interface *alt; - alt = usb_altnum_to_altsetting(intf, 0); - if (!alt) - alt = &intf->altsetting[0]; - if (alt != intf->cur_altsetting) - retval = usb_hcd_alloc_bandwidth(dev, NULL, - intf->cur_altsetting, alt); - if (retval < 0) - break; - } - /* If not, reinstate the old alternate settings */ + /* xHCI adds all endpoints in usb_hcd_alloc_bandwidth */ + retval = usb_hcd_alloc_bandwidth(dev, config, NULL, NULL); if (retval < 0) { -reset_old_alts: - for (i--; i >= 0; i--) { - struct usb_interface *intf = config->interface[i]; - struct usb_host_interface *alt; - - alt = usb_altnum_to_altsetting(intf, 0); - if (!alt) - alt = &intf->altsetting[0]; - if (alt != intf->cur_altsetting) - usb_hcd_alloc_bandwidth(dev, NULL, - alt, intf->cur_altsetting); - } usb_enable_lpm(dev); mutex_unlock(hcd->bandwidth_mutex); return retval; @@ -1589,8 +1578,12 @@ reset_old_alts: USB_REQ_SET_CONFIGURATION, 0, config->desc.bConfigurationValue, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (retval < 0) - goto reset_old_alts; + if (retval < 0) { + usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); + usb_enable_lpm(dev); + mutex_unlock(hcd->bandwidth_mutex); + return retval; + } mutex_unlock(hcd->bandwidth_mutex); /* re-init hc/hcd interface/endpoint state */ diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 7c1198f80c23..10574fa3f927 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -370,6 +370,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0926, 0x0202), .driver_info = USB_QUIRK_ENDPOINT_IGNORE }, + /* Sound Devices MixPre-D */ + { USB_DEVICE(0x0926, 0x0208), .driver_info = + USB_QUIRK_ENDPOINT_IGNORE }, + /* Keytouch QWERTY Panel keyboard */ { USB_DEVICE(0x0926, 0x3333), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, @@ -393,6 +397,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Generic RTL8153 based ethernet adapters */ { USB_DEVICE(0x0bda, 0x8153), .driver_info = USB_QUIRK_NO_LPM }, + /* SONiX USB DEVICE Touchpad */ + { USB_DEVICE(0x0c45, 0x7056), .driver_info = + USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 }, @@ -465,6 +473,8 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x2386, 0x3119), .driver_info = USB_QUIRK_NO_LPM }, + { USB_DEVICE(0x2386, 0x350e), .driver_info = USB_QUIRK_NO_LPM }, + /* DJI CineSSD */ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM }, @@ -509,6 +519,7 @@ static const struct usb_device_id usb_amd_resume_quirk_list[] = { */ static const struct usb_device_id usb_endpoint_ignore[] = { { USB_DEVICE_INTERFACE_NUMBER(0x0926, 0x0202, 1), .driver_info = 0x85 }, + { USB_DEVICE_INTERFACE_NUMBER(0x0926, 0x0208, 1), .driver_info = 0x85 }, { } }; diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index a2ca38e25e0c..8d134193fa0c 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -889,7 +889,11 @@ read_descriptors(struct file *filp, struct kobject *kobj, size_t srclen, n; int cfgno; void *src; + int retval; + retval = usb_lock_device_interruptible(udev); + if (retval < 0) + return -EINTR; /* The binary attribute begins with the device descriptor. * Following that are the raw descriptor entries for all the * configurations (config plus subsidiary descriptors). @@ -914,6 +918,7 @@ read_descriptors(struct file *filp, struct kobject *kobj, off -= srclen; } } + usb_unlock_device(udev); return count - nleft; } diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 422aea24afcd..2eb34c8b4065 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -646,9 +646,8 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI)) break; } - /* FALLTHROUGH */ + fallthrough; case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI: - /* FALLTHROUGH */ default: break; } @@ -1411,7 +1410,7 @@ static void dwc3_check_params(struct dwc3 *dwc) default: dev_err(dev, "invalid maximum_speed parameter %d\n", dwc->maximum_speed); - /* fall through */ + fallthrough; case USB_SPEED_UNKNOWN: /* default to superspeed */ dwc->maximum_speed = USB_SPEED_SUPER; diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c index 88b75b5a039c..1f7f4d88ed9d 100644 --- a/drivers/usb/dwc3/dwc3-meson-g12a.c +++ b/drivers/usb/dwc3/dwc3-meson-g12a.c @@ -737,13 +737,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) goto err_disable_clks; } - ret = reset_control_deassert(priv->reset); + ret = reset_control_reset(priv->reset); if (ret) - goto err_assert_reset; + goto err_disable_clks; ret = dwc3_meson_g12a_get_phys(priv); if (ret) - goto err_assert_reset; + goto err_disable_clks; ret = priv->drvdata->setup_regmaps(priv, base); if (ret) @@ -752,7 +752,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) if (priv->vbus) { ret = regulator_enable(priv->vbus); if (ret) - goto err_assert_reset; + goto err_disable_clks; } /* Get dr_mode */ @@ -765,13 +765,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) ret = priv->drvdata->usb_init(priv); if (ret) - goto err_assert_reset; + goto err_disable_clks; /* Init PHYs */ for (i = 0 ; i < PHY_COUNT ; ++i) { ret = phy_init(priv->phys[i]); if (ret) - goto err_assert_reset; + goto err_disable_clks; } /* Set PHY Power */ @@ -809,9 +809,6 @@ err_phys_exit: for (i = 0 ; i < PHY_COUNT ; ++i) phy_exit(priv->phys[i]); -err_assert_reset: - reset_control_assert(priv->reset); - err_disable_clks: clk_bulk_disable_unprepare(priv->drvdata->num_clks, priv->drvdata->clks); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index e44bfc3b5096..c2a0f64f8d1e 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1054,27 +1054,25 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, * dwc3_prepare_one_trb - setup one TRB from one request * @dep: endpoint for which this request is prepared * @req: dwc3_request pointer + * @trb_length: buffer size of the TRB * @chain: should this TRB be chained to the next? * @node: only for isochronous endpoints. First TRB needs different type. */ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, - struct dwc3_request *req, unsigned chain, unsigned node) + struct dwc3_request *req, unsigned int trb_length, + unsigned chain, unsigned node) { struct dwc3_trb *trb; - unsigned int length; dma_addr_t dma; unsigned stream_id = req->request.stream_id; unsigned short_not_ok = req->request.short_not_ok; unsigned no_interrupt = req->request.no_interrupt; unsigned is_last = req->request.is_last; - if (req->request.num_sgs > 0) { - length = sg_dma_len(req->start_sg); + if (req->request.num_sgs > 0) dma = sg_dma_address(req->start_sg); - } else { - length = req->request.length; + else dma = req->request.dma; - } trb = &dep->trb_pool[dep->trb_enqueue]; @@ -1086,7 +1084,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, req->num_trbs++; - __dwc3_prepare_one_trb(dep, trb, dma, length, chain, node, + __dwc3_prepare_one_trb(dep, trb, dma, trb_length, chain, node, stream_id, short_not_ok, no_interrupt, is_last); } @@ -1096,16 +1094,27 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, struct scatterlist *sg = req->start_sg; struct scatterlist *s; int i; - + unsigned int length = req->request.length; unsigned int remaining = req->request.num_mapped_sgs - req->num_queued_sgs; + /* + * If we resume preparing the request, then get the remaining length of + * the request and resume where we left off. + */ + for_each_sg(req->request.sg, s, req->num_queued_sgs, i) + length -= sg_dma_len(s); + for_each_sg(sg, s, remaining, i) { - unsigned int length = req->request.length; unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc); unsigned int rem = length % maxp; + unsigned int trb_length; unsigned chain = true; + trb_length = min_t(unsigned int, length, sg_dma_len(s)); + + length -= trb_length; + /* * IOMMU driver is coalescing the list of sgs which shares a * page boundary into one and giving it to USB driver. With @@ -1113,7 +1122,7 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, * sgs passed. So mark the chain bit to false if it isthe last * mapped sg. */ - if (i == remaining - 1) + if ((i == remaining - 1) || !length) chain = false; if (rem && usb_endpoint_dir_out(dep->endpoint.desc) && !chain) { @@ -1123,7 +1132,7 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, req->needs_extra_trb = true; /* prepare normal TRB */ - dwc3_prepare_one_trb(dep, req, true, i); + dwc3_prepare_one_trb(dep, req, trb_length, true, i); /* Now prepare one extra TRB to align transfer size */ trb = &dep->trb_pool[dep->trb_enqueue]; @@ -1134,8 +1143,39 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, req->request.short_not_ok, req->request.no_interrupt, req->request.is_last); + } else if (req->request.zero && req->request.length && + !usb_endpoint_xfer_isoc(dep->endpoint.desc) && + !rem && !chain) { + struct dwc3 *dwc = dep->dwc; + struct dwc3_trb *trb; + + req->needs_extra_trb = true; + + /* Prepare normal TRB */ + dwc3_prepare_one_trb(dep, req, trb_length, true, i); + + /* Prepare one extra TRB to handle ZLP */ + trb = &dep->trb_pool[dep->trb_enqueue]; + req->num_trbs++; + __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0, + !req->direction, 1, + req->request.stream_id, + req->request.short_not_ok, + req->request.no_interrupt, + req->request.is_last); + + /* Prepare one more TRB to handle MPS alignment */ + if (!req->direction) { + trb = &dep->trb_pool[dep->trb_enqueue]; + req->num_trbs++; + __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp, + false, 1, req->request.stream_id, + req->request.short_not_ok, + req->request.no_interrupt, + req->request.is_last); + } } else { - dwc3_prepare_one_trb(dep, req, chain, i); + dwc3_prepare_one_trb(dep, req, trb_length, chain, i); } /* @@ -1150,6 +1190,16 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, req->num_queued_sgs++; + /* + * The number of pending SG entries may not correspond to the + * number of mapped SG entries. If all the data are queued, then + * don't include unused SG entries. + */ + if (length == 0) { + req->num_pending_sgs -= req->request.num_mapped_sgs - req->num_queued_sgs; + break; + } + if (!dwc3_calc_trbs_left(dep)) break; } @@ -1169,7 +1219,7 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, req->needs_extra_trb = true; /* prepare normal TRB */ - dwc3_prepare_one_trb(dep, req, true, 0); + dwc3_prepare_one_trb(dep, req, length, true, 0); /* Now prepare one extra TRB to align transfer size */ trb = &dep->trb_pool[dep->trb_enqueue]; @@ -1180,6 +1230,7 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, req->request.no_interrupt, req->request.is_last); } else if (req->request.zero && req->request.length && + !usb_endpoint_xfer_isoc(dep->endpoint.desc) && (IS_ALIGNED(req->request.length, maxp))) { struct dwc3 *dwc = dep->dwc; struct dwc3_trb *trb; @@ -1187,18 +1238,29 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, req->needs_extra_trb = true; /* prepare normal TRB */ - dwc3_prepare_one_trb(dep, req, true, 0); + dwc3_prepare_one_trb(dep, req, length, true, 0); - /* Now prepare one extra TRB to handle ZLP */ + /* Prepare one extra TRB to handle ZLP */ trb = &dep->trb_pool[dep->trb_enqueue]; req->num_trbs++; __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0, - false, 1, req->request.stream_id, + !req->direction, 1, req->request.stream_id, req->request.short_not_ok, req->request.no_interrupt, req->request.is_last); + + /* Prepare one more TRB to handle MPS alignment for OUT */ + if (!req->direction) { + trb = &dep->trb_pool[dep->trb_enqueue]; + req->num_trbs++; + __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp, + false, 1, req->request.stream_id, + req->request.short_not_ok, + req->request.no_interrupt, + req->request.is_last); + } } else { - dwc3_prepare_one_trb(dep, req, false, 0); + dwc3_prepare_one_trb(dep, req, length, false, 0); } } @@ -2671,8 +2733,17 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep, status); if (req->needs_extra_trb) { + unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc); + ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, status); + + /* Reclaim MPS padding TRB for ZLP */ + if (!req->direction && req->request.zero && req->request.length && + !usb_endpoint_xfer_isoc(dep->endpoint.desc) && + (IS_ALIGNED(req->request.length, maxp))) + ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, status); + req->needs_extra_trb = false; } diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c index 331c951d72dc..950c9435beec 100644 --- a/drivers/usb/gadget/function/f_mass_storage.c +++ b/drivers/usb/gadget/function/f_mass_storage.c @@ -2039,7 +2039,6 @@ static int do_scsi_command(struct fsg_common *common) case RELEASE: case RESERVE: case SEND_DIAGNOSTIC: - fallthrough; default: unknown_cmnd: diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index 1d900081b1f0..1f638759a953 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -1181,9 +1181,11 @@ static int ncm_unwrap_ntb(struct gether *port, int ndp_index; unsigned dg_len, dg_len2; unsigned ndp_len; + unsigned block_len; struct sk_buff *skb2; int ret = -EINVAL; - unsigned max_size = le32_to_cpu(ntb_parameters.dwNtbOutMaxSize); + unsigned ntb_max = le32_to_cpu(ntb_parameters.dwNtbOutMaxSize); + unsigned frame_max = le16_to_cpu(ecm_desc.wMaxSegmentSize); const struct ndp_parser_opts *opts = ncm->parser_opts; unsigned crc_len = ncm->is_crc ? sizeof(uint32_t) : 0; int dgram_counter; @@ -1205,8 +1207,9 @@ static int ncm_unwrap_ntb(struct gether *port, } tmp++; /* skip wSequence */ + block_len = get_ncm(&tmp, opts->block_length); /* (d)wBlockLength */ - if (get_ncm(&tmp, opts->block_length) > max_size) { + if (block_len > ntb_max) { INFO(port->func.config->cdev, "OUT size exceeded\n"); goto err; } @@ -1215,15 +1218,23 @@ static int ncm_unwrap_ntb(struct gether *port, /* Run through all the NDP's in the NTB */ do { - /* NCM 3.2 */ - if (((ndp_index % 4) != 0) && - (ndp_index < opts->nth_size)) { + /* + * NCM 3.2 + * dwNdpIndex + */ + if (((ndp_index % 4) != 0) || + (ndp_index < opts->nth_size) || + (ndp_index > (block_len - + opts->ndp_size))) { INFO(port->func.config->cdev, "Bad index: %#X\n", ndp_index); goto err; } - /* walk through NDP */ + /* + * walk through NDP + * dwSignature + */ tmp = (void *)(skb->data + ndp_index); if (get_unaligned_le32(tmp) != ncm->ndp_sign) { INFO(port->func.config->cdev, "Wrong NDP SIGN\n"); @@ -1234,14 +1245,15 @@ static int ncm_unwrap_ntb(struct gether *port, ndp_len = get_unaligned_le16(tmp++); /* * NCM 3.3.1 + * wLength * entry is 2 items * item size is 16/32 bits, opts->dgram_item_len * 2 bytes * minimal: struct usb_cdc_ncm_ndpX + normal entry + zero entry * Each entry is a dgram index and a dgram length. */ if ((ndp_len < opts->ndp_size - + 2 * 2 * (opts->dgram_item_len * 2)) - || (ndp_len % opts->ndplen_align != 0)) { + + 2 * 2 * (opts->dgram_item_len * 2)) || + (ndp_len % opts->ndplen_align != 0)) { INFO(port->func.config->cdev, "Bad NDP length: %#X\n", ndp_len); goto err; @@ -1258,8 +1270,21 @@ static int ncm_unwrap_ntb(struct gether *port, do { index = index2; + /* wDatagramIndex[0] */ + if ((index < opts->nth_size) || + (index > block_len - opts->dpe_size)) { + INFO(port->func.config->cdev, + "Bad index: %#X\n", index); + goto err; + } + dg_len = dg_len2; - if (dg_len < 14 + crc_len) { /* ethernet hdr + crc */ + /* + * wDatagramLength[0] + * ethernet hdr + crc or larger than max frame size + */ + if ((dg_len < 14 + crc_len) || + (dg_len > frame_max)) { INFO(port->func.config->cdev, "Bad dgram length: %#X\n", dg_len); goto err; @@ -1283,6 +1308,13 @@ static int ncm_unwrap_ntb(struct gether *port, index2 = get_ncm(&tmp, opts->dgram_item_len); dg_len2 = get_ncm(&tmp, opts->dgram_item_len); + /* wDatagramIndex[1] */ + if (index2 > block_len - opts->dpe_size) { + INFO(port->func.config->cdev, + "Bad index: %#X\n", index2); + goto err; + } + /* * Copy the data into a new skb. * This ensures the truesize is correct @@ -1299,7 +1331,6 @@ static int ncm_unwrap_ntb(struct gether *port, ndp_len -= 2 * (opts->dgram_item_len * 2); dgram_counter++; - if (index2 == 0 || dg_len2 == 0) break; } while (ndp_len > 2 * (opts->dgram_item_len * 2)); diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c index d94b814328c8..184165e27908 100644 --- a/drivers/usb/gadget/function/f_tcm.c +++ b/drivers/usb/gadget/function/f_tcm.c @@ -753,12 +753,13 @@ static int uasp_alloc_stream_res(struct f_uas *fu, struct uas_stream *stream) goto err_sts; return 0; + err_sts: - usb_ep_free_request(fu->ep_status, stream->req_status); - stream->req_status = NULL; -err_out: usb_ep_free_request(fu->ep_out, stream->req_out); stream->req_out = NULL; +err_out: + usb_ep_free_request(fu->ep_in, stream->req_in); + stream->req_in = NULL; out: return -ENOMEM; } diff --git a/drivers/usb/gadget/u_f.h b/drivers/usb/gadget/u_f.h index eaa13fd3dc7f..e313c3b8dcb1 100644 --- a/drivers/usb/gadget/u_f.h +++ b/drivers/usb/gadget/u_f.h @@ -14,6 +14,7 @@ #define __U_F_H__ #include <linux/usb/gadget.h> +#include <linux/overflow.h> /* Variable Length Array Macros **********************************************/ #define vla_group(groupname) size_t groupname##__next = 0 @@ -21,21 +22,36 @@ #define vla_item(groupname, type, name, n) \ size_t groupname##_##name##__offset = ({ \ - size_t align_mask = __alignof__(type) - 1; \ - size_t offset = (groupname##__next + align_mask) & ~align_mask;\ - size_t size = (n) * sizeof(type); \ - groupname##__next = offset + size; \ + size_t offset = 0; \ + if (groupname##__next != SIZE_MAX) { \ + size_t align_mask = __alignof__(type) - 1; \ + size_t size = array_size(n, sizeof(type)); \ + offset = (groupname##__next + align_mask) & \ + ~align_mask; \ + if (check_add_overflow(offset, size, \ + &groupname##__next)) { \ + groupname##__next = SIZE_MAX; \ + offset = 0; \ + } \ + } \ offset; \ }) #define vla_item_with_sz(groupname, type, name, n) \ - size_t groupname##_##name##__sz = (n) * sizeof(type); \ - size_t groupname##_##name##__offset = ({ \ - size_t align_mask = __alignof__(type) - 1; \ - size_t offset = (groupname##__next + align_mask) & ~align_mask;\ - size_t size = groupname##_##name##__sz; \ - groupname##__next = offset + size; \ - offset; \ + size_t groupname##_##name##__sz = array_size(n, sizeof(type)); \ + size_t groupname##_##name##__offset = ({ \ + size_t offset = 0; \ + if (groupname##__next != SIZE_MAX) { \ + size_t align_mask = __alignof__(type) - 1; \ + offset = (groupname##__next + align_mask) & \ + ~align_mask; \ + if (check_add_overflow(offset, groupname##_##name##__sz,\ + &groupname##__next)) { \ + groupname##__next = SIZE_MAX; \ + offset = 0; \ + } \ + } \ + offset; \ }) #define vla_ptr(ptr, groupname, name) \ diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index fa6793065c7c..a6426dd1cfef 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -328,7 +328,7 @@ static int usba_config_fifo_table(struct usba_udc *udc) switch (fifo_mode) { default: fifo_mode = 0; - /* fall through */ + fallthrough; case 0: udc->fifo_cfg = NULL; n = 0; diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c index b2638e83bb49..a6f7b2594c09 100644 --- a/drivers/usb/gadget/udc/fsl_udc_core.c +++ b/drivers/usb/gadget/udc/fsl_udc_core.c @@ -250,7 +250,7 @@ static int dr_controller_setup(struct fsl_udc *udc) break; case FSL_USB2_PHY_UTMI_WIDE: portctrl |= PORTSCX_PTW_16BIT; - /* fall through */ + fallthrough; case FSL_USB2_PHY_UTMI: case FSL_USB2_PHY_UTMI_DUAL: if (udc->pdata->have_sysif_regs) { diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c index cfafdd92c2a8..10324a7334fe 100644 --- a/drivers/usb/gadget/udc/pxa25x_udc.c +++ b/drivers/usb/gadget/udc/pxa25x_udc.c @@ -2340,12 +2340,12 @@ static int pxa25x_udc_probe(struct platform_device *pdev) case PXA250_A0: case PXA250_A1: /* A0/A1 "not released"; ep 13, 15 unusable */ - /* fall through */ + fallthrough; case PXA250_B2: case PXA210_B2: case PXA250_B1: case PXA210_B1: case PXA250_B0: case PXA210_B0: /* OUT-DMA is broken ... */ - /* fall through */ + fallthrough; case PXA250_C0: case PXA210_C0: break; #elif defined(CONFIG_ARCH_IXP4XX) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 6257be4110ca..3575b7201881 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -22,6 +22,7 @@ #include <linux/interrupt.h> #include <linux/usb.h> #include <linux/usb/hcd.h> +#include <linux/usb/otg.h> #include <linux/moduleparam.h> #include <linux/dma-mapping.h> #include <linux/debugfs.h> diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index ce0eaf7d7c12..087402aec5cb 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -14,7 +14,6 @@ */ /*-------------------------------------------------------------------------*/ -#include <linux/usb/otg.h> #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E) diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index a87c0b26279e..3055d9abfec3 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1019,7 +1019,7 @@ static int isp116x_hub_control(struct usb_hcd *hcd, spin_lock_irqsave(&isp116x->lock, flags); isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_OCIC); spin_unlock_irqrestore(&isp116x->lock, flags); - /* fall through */ + fallthrough; case C_HUB_LOCAL_POWER: DBG("C_HUB_LOCAL_POWER\n"); break; @@ -1421,10 +1421,10 @@ static int isp116x_bus_suspend(struct usb_hcd *hcd) isp116x_write_reg32(isp116x, HCCONTROL, (val & ~HCCONTROL_HCFS) | HCCONTROL_USB_RESET); - /* fall through */ + fallthrough; case HCCONTROL_USB_RESET: ret = -EBUSY; - /* fall through */ + fallthrough; default: /* HCCONTROL_USB_SUSPEND */ spin_unlock_irqrestore(&isp116x->lock, flags); break; diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index bd40e597f256..5f5e8a64c8e2 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -171,9 +171,8 @@ static int exynos_ohci_probe(struct platform_device *pdev) hcd->rsrc_len = resource_size(res); irq = platform_get_irq(pdev, 0); - if (!irq) { - dev_err(&pdev->dev, "Failed to get IRQ\n"); - err = -ENODEV; + if (irq < 0) { + err = irq; goto fail_io; } diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index b8961c0381cf..8c1bbac6d136 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -957,7 +957,8 @@ static void quirk_usb_disable_ehci(struct pci_dev *pdev) ehci_bios_handoff(pdev, op_reg_base, cap, offset); break; case 0: /* Illegal reserved cap, set cap=0 so we exit */ - cap = 0; /* fall through */ + cap = 0; + fallthrough; default: dev_warn(&pdev->dev, "EHCI: unrecognized capability %02x\n", diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index fcc5ac5ce8b1..ccb0156fcebe 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -699,7 +699,7 @@ static void dbc_handle_xfer_event(struct xhci_dbc *dbc, union xhci_trb *event) switch (comp_code) { case COMP_SUCCESS: remain_length = 0; - /* FALLTHROUGH */ + fallthrough; case COMP_SHORT_PACKET: status = 0; break; diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c index 92e25a62fdb5..c88bffd68742 100644 --- a/drivers/usb/host/xhci-debugfs.c +++ b/drivers/usb/host/xhci-debugfs.c @@ -274,7 +274,7 @@ static int xhci_slot_context_show(struct seq_file *s, void *unused) static int xhci_endpoint_context_show(struct seq_file *s, void *unused) { - int dci; + int ep_index; dma_addr_t dma; struct xhci_hcd *xhci; struct xhci_ep_ctx *ep_ctx; @@ -283,9 +283,9 @@ static int xhci_endpoint_context_show(struct seq_file *s, void *unused) xhci = hcd_to_xhci(bus_to_hcd(dev->udev->bus)); - for (dci = 1; dci < 32; dci++) { - ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, dci); - dma = dev->out_ctx->dma + dci * CTX_SIZE(xhci->hcc_params); + for (ep_index = 0; ep_index < 31; ep_index++) { + ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); + dma = dev->out_ctx->dma + (ep_index + 1) * CTX_SIZE(xhci->hcc_params); seq_printf(s, "%pad: %s\n", &dma, xhci_decode_ep_context(le32_to_cpu(ep_ctx->ep_info), le32_to_cpu(ep_ctx->ep_info2), diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index c3554e37e09f..c799ca5361d4 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -740,15 +740,6 @@ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci, { u32 pls = status_reg & PORT_PLS_MASK; - /* resume state is a xHCI internal state. - * Do not report it to usb core, instead, pretend to be U3, - * thus usb core knows it's not ready for transfer - */ - if (pls == XDEV_RESUME) { - *status |= USB_SS_PORT_LS_U3; - return; - } - /* When the CAS bit is set then warm reset * should be performed on port */ @@ -771,6 +762,16 @@ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci, pls |= USB_PORT_STAT_CONNECTION; } else { /* + * Resume state is an xHCI internal state. Do not report it to + * usb core, instead, pretend to be U3, thus usb core knows + * it's not ready for transfer. + */ + if (pls == XDEV_RESUME) { + *status |= USB_SS_PORT_LS_U3; + return; + } + + /* * If CAS bit isn't set but the Port is already at * Compliance Mode, fake a connection so the USB core * notices the Compliance state and resets the port. @@ -1483,7 +1484,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, break; case USB_PORT_FEAT_C_SUSPEND: bus_state->port_c_suspend &= ~(1 << wIndex); - /* fall through */ + fallthrough; case USB_PORT_FEAT_C_RESET: case USB_PORT_FEAT_C_BH_PORT_RESET: case USB_PORT_FEAT_C_CONNECTION: diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 696fad50b478..fe405cd38dbc 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1311,7 +1311,7 @@ static unsigned int xhci_get_endpoint_interval(struct usb_device *udev, interval = xhci_parse_microframe_interval(udev, ep); break; } - /* Fall through - SS and HS isoc/int have same decoding */ + fallthrough; /* SS and HS isoc/int have same decoding */ case USB_SPEED_SUPER_PLUS: case USB_SPEED_SUPER: @@ -1331,7 +1331,7 @@ static unsigned int xhci_get_endpoint_interval(struct usb_device *udev, * since it uses the same rules as low speed interrupt * endpoints. */ - /* fall through */ + fallthrough; case USB_SPEED_LOW: if (usb_endpoint_xfer_int(&ep->desc) || diff --git a/drivers/usb/host/xhci-pci-renesas.c b/drivers/usb/host/xhci-pci-renesas.c index 59b1965ad0a3..f97ac9f52bf4 100644 --- a/drivers/usb/host/xhci-pci-renesas.c +++ b/drivers/usb/host/xhci-pci-renesas.c @@ -50,20 +50,6 @@ #define RENESAS_RETRY 10000 #define RENESAS_DELAY 10 -#define ROM_VALID_01 0x2013 -#define ROM_VALID_02 0x2026 - -static int renesas_verify_fw_version(struct pci_dev *pdev, u32 version) -{ - switch (version) { - case ROM_VALID_01: - case ROM_VALID_02: - return 0; - } - dev_err(&pdev->dev, "FW has invalid version :%d\n", version); - return -EINVAL; -} - static int renesas_fw_download_image(struct pci_dev *dev, const u32 *fw, size_t step, bool rom) { @@ -202,10 +188,7 @@ static int renesas_check_rom_state(struct pci_dev *pdev) version &= RENESAS_FW_VERSION_FIELD; version = version >> RENESAS_FW_VERSION_OFFSET; - - err = renesas_verify_fw_version(pdev, version); - if (err) - return err; + dev_dbg(&pdev->dev, "Found ROM version: %x\n", version); /* * Test if ROM is present and loaded, if so we can skip everything diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 2c255d0620b0..a741a38a4c69 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2103,7 +2103,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td, break; xhci_dbg(xhci, "TRB error %u, halted endpoint index = %u\n", trb_comp_code, ep_index); - /* else fall through */ + fallthrough; case COMP_STALL_ERROR: /* Did we transfer part of the data (middle) phase? */ if (trb_type == TRB_DATA || trb_type == TRB_NORMAL) diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index 014d79334f50..190923d8b246 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1136,7 +1136,7 @@ static struct phy *tegra_xusb_get_phy(struct tegra_xusb *tegra, char *name, unsigned int i, phy_count = 0; for (i = 0; i < tegra->soc->num_types; i++) { - if (!strncmp(tegra->soc->phy_types[i].name, "usb2", + if (!strncmp(tegra->soc->phy_types[i].name, name, strlen(name))) return tegra->phys[phy_count+port]; @@ -1258,6 +1258,8 @@ static int tegra_xusb_init_usb_phy(struct tegra_xusb *tegra) INIT_WORK(&tegra->id_work, tegra_xhci_id_work); tegra->id_nb.notifier_call = tegra_xhci_id_notify; + tegra->otg_usb2_port = -EINVAL; + tegra->otg_usb3_port = -EINVAL; for (i = 0; i < tegra->num_usb_phys; i++) { struct phy *phy = tegra_xusb_get_phy(tegra, "usb2", i); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 3c41b14ecce7..f4cedcaee14b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3236,10 +3236,11 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd, wait_for_completion(cfg_cmd->completion); - ep->ep_state &= ~EP_SOFT_CLEAR_TOGGLE; xhci_free_command(xhci, cfg_cmd); cleanup: xhci_free_command(xhci, stop_cmd); + if (ep->ep_state & EP_SOFT_CLEAR_TOGGLE) + ep->ep_state &= ~EP_SOFT_CLEAR_TOGGLE; } static int xhci_check_streams_endpoint(struct xhci_hcd *xhci, @@ -4618,7 +4619,7 @@ static unsigned long long xhci_calculate_intel_u1_timeout( break; } /* Otherwise the calculation is the same as isoc eps */ - /* fall through */ + fallthrough; case USB_ENDPOINT_XFER_ISOC: timeout_ns = xhci_service_interval_to_ns(desc); timeout_ns = DIV_ROUND_UP_ULL(timeout_ns * 105, 100); diff --git a/drivers/usb/misc/lvstest.c b/drivers/usb/misc/lvstest.c index 407fe7570f3b..f8686139d6f3 100644 --- a/drivers/usb/misc/lvstest.c +++ b/drivers/usb/misc/lvstest.c @@ -426,7 +426,7 @@ static int lvs_rh_probe(struct usb_interface *intf, USB_DT_SS_HUB_SIZE, USB_CTRL_GET_TIMEOUT); if (ret < (USB_DT_HUB_NONVAR_SIZE + 2)) { dev_err(&hdev->dev, "wrong root hub descriptor read %d\n", ret); - return ret; + return ret < 0 ? ret : -EINVAL; } /* submit urb to poll interrupt endpoint */ diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 6e7d34e7fec4..b2e09883c7e2 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -492,7 +492,7 @@ static ssize_t yurex_write(struct file *file, const char __user *user_buffer, prepare_to_wait(&dev->waitq, &wait, TASK_INTERRUPTIBLE); dev_dbg(&dev->interface->dev, "%s - submit %c\n", __func__, dev->cntl_buffer[0]); - retval = usb_submit_urb(dev->cntl_urb, GFP_KERNEL); + retval = usb_submit_urb(dev->cntl_urb, GFP_ATOMIC); if (retval >= 0) timeout = schedule_timeout(YUREX_WRITE_TIMEOUT); finish_wait(&dev->waitq, &wait); diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index c545b27ea568..edb5b63d7063 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -975,7 +975,7 @@ static int cppi_channel_program(struct dma_channel *ch, musb_dbg(musb, "%cX DMA%d not allocated!", cppi_ch->transmit ? 'T' : 'R', cppi_ch->index); - /* FALLTHROUGH */ + fallthrough; case MUSB_DMA_STATUS_FREE: break; } diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 5a56a03996b1..849e0b770130 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -852,7 +852,7 @@ static void musb_handle_intr_suspend(struct musb *musb, u8 devctl) case OTG_STATE_B_IDLE: if (!musb->is_active) break; - /* fall through */ + fallthrough; case OTG_STATE_B_PERIPHERAL: musb_g_suspend(musb); musb->is_active = musb->g.b_hnp_enable; @@ -972,9 +972,8 @@ static void musb_handle_intr_disconnect(struct musb *musb, u8 devctl) case OTG_STATE_A_PERIPHERAL: musb_hnp_stop(musb); musb_root_disconnect(musb); - /* FALLTHROUGH */ + fallthrough; case OTG_STATE_B_WAIT_ACON: - /* FALLTHROUGH */ case OTG_STATE_B_PERIPHERAL: case OTG_STATE_B_IDLE: musb_g_disconnect(musb); @@ -1009,7 +1008,7 @@ static void musb_handle_intr_reset(struct musb *musb) switch (musb->xceiv->otg->state) { case OTG_STATE_A_SUSPEND: musb_g_reset(musb); - /* FALLTHROUGH */ + fallthrough; case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */ /* never use invalid T(a_wait_bcon) */ musb_dbg(musb, "HNP: in %s, %d msec timeout", @@ -1030,7 +1029,7 @@ static void musb_handle_intr_reset(struct musb *musb) break; case OTG_STATE_B_IDLE: musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; - /* FALLTHROUGH */ + fallthrough; case OTG_STATE_B_PERIPHERAL: musb_g_reset(musb); break; @@ -1471,7 +1470,7 @@ static int ep_config_from_table(struct musb *musb) switch (fifo_mode) { default: fifo_mode = 0; - /* FALLTHROUGH */ + fallthrough; case 0: cfg = mode_0_cfg; n = ARRAY_SIZE(mode_0_cfg); @@ -2018,7 +2017,7 @@ static void musb_pm_runtime_check_session(struct musb *musb) musb->quirk_retries--; return; } - /* fall through */ + fallthrough; case MUSB_QUIRK_A_DISCONNECT_19: if (musb->quirk_retries && !musb->flush_irq_work) { musb_dbg(musb, diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 19556c1a8ae8..30085b2be7b9 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -232,7 +232,7 @@ static int dsps_check_status(struct musb *musb, void *unused) dsps_mod_timer_optional(glue); break; } - /* fall through */ + fallthrough; case OTG_STATE_A_WAIT_BCON: /* keep VBUS on for host-only mode */ @@ -242,7 +242,7 @@ static int dsps_check_status(struct musb *musb, void *unused) } musb_writeb(musb->mregs, MUSB_DEVCTL, 0); skip_session = 1; - /* fall through */ + fallthrough; case OTG_STATE_A_IDLE: case OTG_STATE_B_IDLE: @@ -793,7 +793,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, case USB_SPEED_SUPER: dev_warn(dev, "ignore incorrect maximum_speed " "(super-speed) setting in dts"); - /* fall through */ + fallthrough; default: config->maximum_speed = USB_SPEED_HIGH; } diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index 0ae3e0be043e..44d3cb02fa76 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -735,7 +735,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb) musb_writeb(mbase, MUSB_TESTMODE, musb->test_mode_nr); } - /* FALLTHROUGH */ + fallthrough; case MUSB_EP0_STAGE_STATUSOUT: /* end of sequence #1: write to host (TX state) */ @@ -767,7 +767,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb) */ retval = IRQ_HANDLED; musb->ep0_state = MUSB_EP0_STAGE_SETUP; - /* FALLTHROUGH */ + fallthrough; case MUSB_EP0_STAGE_SETUP: setup: diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 8b7d22a0c0fb..30c5e7de0761 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -360,7 +360,7 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb, qh = first_qh(head); break; } - /* fall through */ + fallthrough; case USB_ENDPOINT_XFER_ISOC: case USB_ENDPOINT_XFER_INT: @@ -1019,7 +1019,7 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb) musb->ep0_stage = MUSB_EP0_OUT; more = true; } - /* FALLTHROUGH */ + fallthrough; case MUSB_EP0_OUT: fifo_count = min_t(size_t, qh->maxpacket, urb->transfer_buffer_length - @@ -2222,7 +2222,7 @@ static int musb_urb_enqueue( interval = max_t(u8, epd->bInterval, 1); break; } - /* FALLTHROUGH */ + fallthrough; case USB_ENDPOINT_XFER_ISOC: /* ISO always uses logarithmic encoding */ interval = min_t(u8, epd->bInterval, 16); diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index cb7ae297a3af..cafc69536e1d 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -211,7 +211,7 @@ void musb_root_disconnect(struct musb *musb) musb->g.is_a_peripheral = 1; break; } - /* FALLTHROUGH */ + fallthrough; case OTG_STATE_A_HOST: musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; musb->is_active = 0; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index d62c78b97cad..4232f1ce3fbf 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -104,7 +104,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) if (error) break; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; - /* Fall through */ + fallthrough; case OTG_STATE_A_WAIT_VRISE: case OTG_STATE_A_WAIT_BCON: case OTG_STATE_A_HOST: diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 99890d1bbfcb..c26683a2702b 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -464,7 +464,7 @@ static void musb_do_idle(struct timer_list *t) dev_dbg(musb->controller, "Nothing connected %s, turning off VBUS\n", usb_otg_state_string(musb->xceiv->otg->state)); } - /* FALLTHROUGH */ + fallthrough; case OTG_STATE_A_IDLE: tusb_musb_set_vbus(musb, 0); default: diff --git a/drivers/usb/phy/phy-jz4770.c b/drivers/usb/phy/phy-jz4770.c index d4ee3cb721ea..f6d3731581eb 100644 --- a/drivers/usb/phy/phy-jz4770.c +++ b/drivers/usb/phy/phy-jz4770.c @@ -176,6 +176,7 @@ static int ingenic_usb_phy_init(struct usb_phy *phy) /* Wait for PHY to reset */ usleep_range(30, 300); + reg = readl(priv->base + REG_USBPCR_OFFSET); writel(reg & ~USBPCR_POR, priv->base + REG_USBPCR_OFFSET); usleep_range(300, 1000); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 871cdccf3a5f..9823bb424abd 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -713,6 +713,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) }, { USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) }, { USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) }, + { USB_DEVICE(XSENS_VID, XSENS_MTIUSBCONVERTER_PID) }, { USB_DEVICE(XSENS_VID, XSENS_MTW_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OMNI1509) }, { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index e8373528264c..b5ca17a5967a 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -160,6 +160,7 @@ #define XSENS_AWINDA_DONGLE_PID 0x0102 #define XSENS_MTW_PID 0x0200 /* Xsens MTw */ #define XSENS_MTDEVBOARD_PID 0x0300 /* Motion Tracker Development Board */ +#define XSENS_MTIUSBCONVERTER_PID 0x0301 /* MTi USB converter */ #define XSENS_CONVERTER_PID 0xD00D /* Xsens USB-serial converter */ /* Xsens devices using FTDI VID */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 89b3192af326..0c6f160a214a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1094,14 +1094,18 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M), .driver_info = RSVD(1) | RSVD(3) }, /* Quectel products using Quectel vendor ID */ - { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21), - .driver_info = RSVD(4) }, - { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25), - .driver_info = RSVD(4) }, - { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95), - .driver_info = RSVD(4) }, - { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), - .driver_info = RSVD(4) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff), + .driver_info = NUMEP2 }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0xff, 0xff), + .driver_info = NUMEP2 }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff), + .driver_info = NUMEP2 }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96, 0xff, 0xff, 0xff), + .driver_info = NUMEP2 }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, @@ -1819,6 +1823,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) }, /* Simcom SIM7500/SIM7600 MBIM mode */ { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff), /* Simcom SIM7500/SIM7600 RNDIS mode */ .driver_info = RSVD(7) }, + { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9205, 0xff) }, /* Simcom SIM7070/SIM7080/SIM7090 AT+ECM mode */ + { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9206, 0xff) }, /* Simcom SIM7070/SIM7080/SIM7090 AT-only mode */ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200), .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D), diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c index c8a988d2cfdd..15dc25801cdc 100644 --- a/drivers/usb/storage/sddr55.c +++ b/drivers/usb/storage/sddr55.c @@ -592,7 +592,7 @@ static unsigned long sddr55_get_capacity(struct us_data *us) { case 0x64: info->pageshift = 8; info->smallpageshift = 1; - /* fall through */ + fallthrough; case 0x5d: // 5d is a ROM card with pagesize 512. return 0x00200000; diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index d592071119ba..8183504e3abb 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -662,8 +662,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, if (devinfo->resetting) { cmnd->result = DID_ERROR << 16; cmnd->scsi_done(cmnd); - spin_unlock_irqrestore(&devinfo->lock, flags); - return 0; + goto zombie; } /* Find a free uas-tag */ @@ -688,7 +687,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, break; case DMA_BIDIRECTIONAL: cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; - /* fall through */ + fallthrough; case DMA_TO_DEVICE: cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB; case DMA_NONE: @@ -699,6 +698,16 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB); err = uas_submit_urbs(cmnd, devinfo); + /* + * in case of fatal errors the SCSI layer is peculiar + * a command that has finished is a success for the purpose + * of queueing, no matter how fatal the error + */ + if (err == -ENODEV) { + cmnd->result = DID_ERROR << 16; + cmnd->scsi_done(cmnd); + goto zombie; + } if (err) { /* If we did nothing, give up now */ if (cmdinfo->state & SUBMIT_STATUS_URB) { @@ -709,6 +718,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, } devinfo->cmnd[idx] = cmnd; +zombie: spin_unlock_irqrestore(&devinfo->lock, flags); return 0; } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 220ae2c356ee..5732e9691f08 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2328,7 +2328,7 @@ UNUSUAL_DEV( 0x357d, 0x7788, 0x0114, 0x0114, "JMicron", "USB to ATA/ATAPI Bridge", USB_SC_DEVICE, USB_PR_DEVICE, NULL, - US_FL_BROKEN_FUA ), + US_FL_BROKEN_FUA | US_FL_IGNORE_UAS ), /* Reported by Andrey Rahmatullin <wrar@altlinux.org> */ UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100, diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 162b09d69f62..711ab240058c 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -28,6 +28,13 @@ * and don't forget to CC: the USB development list <linux-usb@vger.kernel.org> */ +/* Reported-by: Till Dörges <doerges@pre-sense.de> */ +UNUSUAL_DEV(0x054c, 0x087d, 0x0000, 0x9999, + "Sony", + "PSZ-HA*", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_REPORT_OPCODES), + /* Reported-by: Julian Groß <julian.g@posteo.de> */ UNUSUAL_DEV(0x059f, 0x105f, 0x0000, 0x9999, "LaCie", @@ -80,6 +87,13 @@ UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BROKEN_FUA), +/* Reported-by: Thinh Nguyen <thinhn@synopsys.com> */ +UNUSUAL_DEV(0x154b, 0xf00d, 0x0000, 0x9999, + "PNY", + "Pro Elite SSD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + /* Reported-by: Hans de Goede <hdegoede@redhat.com> */ UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999, "VIA", diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c index e4021e13af40..676b525c2a66 100644 --- a/drivers/usb/typec/mux/intel_pmc_mux.c +++ b/drivers/usb/typec/mux/intel_pmc_mux.c @@ -61,14 +61,11 @@ enum { #define PMC_USB_ALTMODE_ORI_SHIFT 1 #define PMC_USB_ALTMODE_UFP_SHIFT 3 -#define PMC_USB_ALTMODE_ORI_AUX_SHIFT 4 -#define PMC_USB_ALTMODE_ORI_HSL_SHIFT 5 /* DP specific Mode Data bits */ #define PMC_USB_ALTMODE_DP_MODE_SHIFT 8 /* TBT specific Mode Data bits */ -#define PMC_USB_ALTMODE_HPD_HIGH BIT(14) #define PMC_USB_ALTMODE_TBT_TYPE BIT(17) #define PMC_USB_ALTMODE_CABLE_TYPE BIT(18) #define PMC_USB_ALTMODE_ACTIVE_LINK BIT(20) @@ -128,13 +125,19 @@ static int hsl_orientation(struct pmc_usb_port *port) static int pmc_usb_command(struct pmc_usb_port *port, u8 *msg, u32 len) { u8 response[4]; + int ret; /* * Error bit will always be 0 with the USBC command. - * Status can be checked from the response message. + * Status can be checked from the response message if the + * function intel_scu_ipc_dev_command succeeds. */ - intel_scu_ipc_dev_command(port->pmc->ipc, PMC_USBC_CMD, 0, msg, len, - response, sizeof(response)); + ret = intel_scu_ipc_dev_command(port->pmc->ipc, PMC_USBC_CMD, 0, msg, + len, response, sizeof(response)); + + if (ret) + return ret; + if (response[2] & PMC_USB_RESP_STATUS_FAILURE) { if (response[2] & PMC_USB_RESP_STATUS_FATAL) return -EIO; @@ -179,15 +182,9 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state) req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT; req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT; - req.mode_data |= sbu_orientation(port) << PMC_USB_ALTMODE_ORI_AUX_SHIFT; - req.mode_data |= hsl_orientation(port) << PMC_USB_ALTMODE_ORI_HSL_SHIFT; - req.mode_data |= (state->mode - TYPEC_STATE_MODAL) << PMC_USB_ALTMODE_DP_MODE_SHIFT; - if (data->status & DP_STATUS_HPD_STATE) - req.mode_data |= PMC_USB_ALTMODE_HPD_HIGH; - ret = pmc_usb_command(port, (void *)&req, sizeof(req)); if (ret) return ret; @@ -212,9 +209,6 @@ pmc_usb_mux_tbt(struct pmc_usb_port *port, struct typec_mux_state *state) req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT; req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT; - req.mode_data |= sbu_orientation(port) << PMC_USB_ALTMODE_ORI_AUX_SHIFT; - req.mode_data |= hsl_orientation(port) << PMC_USB_ALTMODE_ORI_HSL_SHIFT; - if (TBT_ADAPTER(data->device_mode) == TBT_ADAPTER_TBT3) req.mode_data |= PMC_USB_ALTMODE_TBT_TYPE; @@ -497,6 +491,7 @@ err_remove_ports: for (i = 0; i < pmc->num_ports; i++) { typec_switch_unregister(pmc->port[i].typec_sw); typec_mux_unregister(pmc->port[i].typec_mux); + usb_role_switch_unregister(pmc->port[i].usb_sw); } return ret; @@ -510,6 +505,7 @@ static int pmc_usb_remove(struct platform_device *pdev) for (i = 0; i < pmc->num_ports; i++) { typec_switch_unregister(pmc->port[i].typec_sw); typec_mux_unregister(pmc->port[i].typec_mux); + usb_role_switch_unregister(pmc->port[i].usb_sw); } return 0; diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c index f57d91fd0e09..bd80e03b2b6f 100644 --- a/drivers/usb/typec/tcpm/tcpci.c +++ b/drivers/usb/typec/tcpm/tcpci.c @@ -157,7 +157,7 @@ static enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink) case 0x3: if (sink) return TYPEC_CC_RP_3_0; - /* fall through */ + fallthrough; case 0x0: default: return TYPEC_CC_OPEN; diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 3ef37202ee37..a48e3f90d196 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -3372,13 +3372,31 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_state(port, SNK_HARD_RESET_SINK_OFF, 0); break; case SRC_HARD_RESET_VBUS_OFF: - tcpm_set_vconn(port, true); + /* + * 7.1.5 Response to Hard Resets + * Hard Reset Signaling indicates a communication failure has occurred and the + * Source Shall stop driving VCONN, Shall remove Rp from the VCONN pin and Shall + * drive VBUS to vSafe0V as shown in Figure 7-9. + */ + tcpm_set_vconn(port, false); tcpm_set_vbus(port, false); tcpm_set_roles(port, port->self_powered, TYPEC_SOURCE, tcpm_data_role_for_source(port)); - tcpm_set_state(port, SRC_HARD_RESET_VBUS_ON, PD_T_SRC_RECOVER); + /* + * If tcpc fails to notify vbus off, TCPM will wait for PD_T_SAFE_0V + + * PD_T_SRC_RECOVER before turning vbus back on. + * From Table 7-12 Sequence Description for a Source Initiated Hard Reset: + * 4. Policy Engine waits tPSHardReset after sending Hard Reset Signaling and then + * tells the Device Policy Manager to instruct the power supply to perform a + * Hard Reset. The transition to vSafe0V Shall occur within tSafe0V (t2). + * 5. After tSrcRecover the Source applies power to VBUS in an attempt to + * re-establish communication with the Sink and resume USB Default Operation. + * The transition to vSafe5V Shall occur within tSrcTurnOn(t4). + */ + tcpm_set_state(port, SRC_HARD_RESET_VBUS_ON, PD_T_SAFE_0V + PD_T_SRC_RECOVER); break; case SRC_HARD_RESET_VBUS_ON: + tcpm_set_vconn(port, true); tcpm_set_vbus(port, true); port->tcpc->set_pd_rx(port->tcpc, true); tcpm_set_attached_state(port, true); @@ -3944,7 +3962,11 @@ static void _tcpm_pd_vbus_off(struct tcpm_port *port) tcpm_set_state(port, SNK_HARD_RESET_WAIT_VBUS, 0); break; case SRC_HARD_RESET_VBUS_OFF: - tcpm_set_state(port, SRC_HARD_RESET_VBUS_ON, 0); + /* + * After establishing the vSafe0V voltage condition on VBUS, the Source Shall wait + * tSrcRecover before re-applying VCONN and restoring VBUS to vSafe5V. + */ + tcpm_set_state(port, SRC_HARD_RESET_VBUS_ON, PD_T_SRC_RECOVER); break; case HARD_RESET_SEND: break; diff --git a/drivers/usb/typec/ucsi/displayport.c b/drivers/usb/typec/ucsi/displayport.c index 048381c058a5..261131c9e37c 100644 --- a/drivers/usb/typec/ucsi/displayport.c +++ b/drivers/usb/typec/ucsi/displayport.c @@ -288,8 +288,6 @@ struct typec_altmode *ucsi_register_displayport(struct ucsi_connector *con, struct typec_altmode *alt; struct ucsi_dp *dp; - mutex_lock(&con->lock); - /* We can't rely on the firmware with the capabilities. */ desc->vdo |= DP_CAP_DP_SIGNALING | DP_CAP_RECEPTACLE; @@ -298,15 +296,12 @@ struct typec_altmode *ucsi_register_displayport(struct ucsi_connector *con, desc->vdo |= all_assignments << 16; alt = typec_port_register_altmode(con->port, desc); - if (IS_ERR(alt)) { - mutex_unlock(&con->lock); + if (IS_ERR(alt)) return alt; - } dp = devm_kzalloc(&alt->dev, sizeof(*dp), GFP_KERNEL); if (!dp) { typec_unregister_altmode(alt); - mutex_unlock(&con->lock); return ERR_PTR(-ENOMEM); } @@ -319,7 +314,5 @@ struct typec_altmode *ucsi_register_displayport(struct ucsi_connector *con, alt->ops = &ucsi_displayport_ops; typec_altmode_set_drvdata(alt, dp); - mutex_unlock(&con->lock); - return alt; } diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index affd024190c9..758b988ac518 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -146,40 +146,33 @@ static int ucsi_exec_command(struct ucsi *ucsi, u64 cmd) return UCSI_CCI_LENGTH(cci); } -static int ucsi_run_command(struct ucsi *ucsi, u64 command, - void *data, size_t size) +int ucsi_send_command(struct ucsi *ucsi, u64 command, + void *data, size_t size) { u8 length; int ret; + mutex_lock(&ucsi->ppm_lock); + ret = ucsi_exec_command(ucsi, command); if (ret < 0) - return ret; + goto out; length = ret; if (data) { ret = ucsi->ops->read(ucsi, UCSI_MESSAGE_IN, data, size); if (ret) - return ret; + goto out; } ret = ucsi_acknowledge_command(ucsi); if (ret) - return ret; + goto out; - return length; -} - -int ucsi_send_command(struct ucsi *ucsi, u64 command, - void *retval, size_t size) -{ - int ret; - - mutex_lock(&ucsi->ppm_lock); - ret = ucsi_run_command(ucsi, command, retval, size); + ret = length; +out: mutex_unlock(&ucsi->ppm_lock); - return ret; } EXPORT_SYMBOL_GPL(ucsi_send_command); @@ -205,7 +198,7 @@ void ucsi_altmode_update_active(struct ucsi_connector *con) int i; command = UCSI_GET_CURRENT_CAM | UCSI_CONNECTOR_NUMBER(con->num); - ret = ucsi_run_command(con->ucsi, command, &cur, sizeof(cur)); + ret = ucsi_send_command(con->ucsi, command, &cur, sizeof(cur)); if (ret < 0) { if (con->ucsi->version > 0x0100) { dev_err(con->ucsi->dev, @@ -223,14 +216,18 @@ void ucsi_altmode_update_active(struct ucsi_connector *con) con->partner_altmode[i] == altmode); } -static u8 ucsi_altmode_next_mode(struct typec_altmode **alt, u16 svid) +static int ucsi_altmode_next_mode(struct typec_altmode **alt, u16 svid) { u8 mode = 1; int i; - for (i = 0; alt[i]; i++) + for (i = 0; alt[i]; i++) { + if (i > MODE_DISCOVERY_MAX) + return -ERANGE; + if (alt[i]->svid == svid) mode++; + } return mode; } @@ -265,8 +262,11 @@ static int ucsi_register_altmode(struct ucsi_connector *con, goto err; } - desc->mode = ucsi_altmode_next_mode(con->port_altmode, - desc->svid); + ret = ucsi_altmode_next_mode(con->port_altmode, desc->svid); + if (ret < 0) + return ret; + + desc->mode = ret; switch (desc->svid) { case USB_TYPEC_DP_SID: @@ -299,8 +299,11 @@ static int ucsi_register_altmode(struct ucsi_connector *con, goto err; } - desc->mode = ucsi_altmode_next_mode(con->partner_altmode, - desc->svid); + ret = ucsi_altmode_next_mode(con->partner_altmode, desc->svid); + if (ret < 0) + return ret; + + desc->mode = ret; alt = typec_partner_register_altmode(con->partner, desc); if (IS_ERR(alt)) { @@ -354,7 +357,7 @@ ucsi_register_altmodes_nvidia(struct ucsi_connector *con, u8 recipient) command |= UCSI_GET_ALTMODE_RECIPIENT(recipient); command |= UCSI_GET_ALTMODE_CONNECTOR_NUMBER(con->num); command |= UCSI_GET_ALTMODE_OFFSET(i); - len = ucsi_run_command(con->ucsi, command, &alt, sizeof(alt)); + len = ucsi_send_command(con->ucsi, command, &alt, sizeof(alt)); /* * We are collecting all altmodes first and then registering. * Some type-C device will return zero length data beyond last @@ -431,7 +434,7 @@ static int ucsi_register_altmodes(struct ucsi_connector *con, u8 recipient) command |= UCSI_GET_ALTMODE_RECIPIENT(recipient); command |= UCSI_GET_ALTMODE_CONNECTOR_NUMBER(con->num); command |= UCSI_GET_ALTMODE_OFFSET(i); - len = ucsi_run_command(con->ucsi, command, alt, sizeof(alt)); + len = ucsi_send_command(con->ucsi, command, alt, sizeof(alt)); if (len <= 0) return len; @@ -502,7 +505,7 @@ static void ucsi_get_pdos(struct ucsi_connector *con, int is_partner) command |= UCSI_GET_PDOS_PARTNER_PDO(is_partner); command |= UCSI_GET_PDOS_NUM_PDOS(UCSI_MAX_PDOS - 1); command |= UCSI_GET_PDOS_SRC_PDOS; - ret = ucsi_run_command(ucsi, command, con->src_pdos, + ret = ucsi_send_command(ucsi, command, con->src_pdos, sizeof(con->src_pdos)); if (ret < 0) { dev_err(ucsi->dev, "UCSI_GET_PDOS failed (%d)\n", ret); @@ -681,7 +684,7 @@ static void ucsi_handle_connector_change(struct work_struct *work) */ command = UCSI_GET_CAM_SUPPORTED; command |= UCSI_CONNECTOR_NUMBER(con->num); - ucsi_run_command(con->ucsi, command, NULL, 0); + ucsi_send_command(con->ucsi, command, NULL, 0); } if (con->status.change & UCSI_CONSTAT_PARTNER_CHANGE) @@ -736,20 +739,24 @@ static int ucsi_reset_ppm(struct ucsi *ucsi) u32 cci; int ret; + mutex_lock(&ucsi->ppm_lock); + ret = ucsi->ops->async_write(ucsi, UCSI_CONTROL, &command, sizeof(command)); if (ret < 0) - return ret; + goto out; tmo = jiffies + msecs_to_jiffies(UCSI_TIMEOUT_MS); do { - if (time_is_before_jiffies(tmo)) - return -ETIMEDOUT; + if (time_is_before_jiffies(tmo)) { + ret = -ETIMEDOUT; + goto out; + } ret = ucsi->ops->read(ucsi, UCSI_CCI, &cci, sizeof(cci)); if (ret) - return ret; + goto out; /* If the PPM is still doing something else, reset it again. */ if (cci & ~UCSI_CCI_RESET_COMPLETE) { @@ -757,13 +764,15 @@ static int ucsi_reset_ppm(struct ucsi *ucsi) &command, sizeof(command)); if (ret < 0) - return ret; + goto out; } msleep(20); } while (!(cci & UCSI_CCI_RESET_COMPLETE)); - return 0; +out: + mutex_unlock(&ucsi->ppm_lock); + return ret; } static int ucsi_role_cmd(struct ucsi_connector *con, u64 command) @@ -775,9 +784,7 @@ static int ucsi_role_cmd(struct ucsi_connector *con, u64 command) u64 c; /* PPM most likely stopped responding. Resetting everything. */ - mutex_lock(&con->ucsi->ppm_lock); ucsi_reset_ppm(con->ucsi); - mutex_unlock(&con->ucsi->ppm_lock); c = UCSI_SET_NOTIFICATION_ENABLE | con->ucsi->ntfy; ucsi_send_command(con->ucsi, c, NULL, 0); @@ -901,12 +908,15 @@ static int ucsi_register_port(struct ucsi *ucsi, int index) con->num = index + 1; con->ucsi = ucsi; + /* Delay other interactions with the con until registration is complete */ + mutex_lock(&con->lock); + /* Get connector capability */ command = UCSI_GET_CONNECTOR_CAPABILITY; command |= UCSI_CONNECTOR_NUMBER(con->num); - ret = ucsi_run_command(ucsi, command, &con->cap, sizeof(con->cap)); + ret = ucsi_send_command(ucsi, command, &con->cap, sizeof(con->cap)); if (ret < 0) - return ret; + goto out; if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DRP) cap->data = TYPEC_PORT_DRD; @@ -938,27 +948,32 @@ static int ucsi_register_port(struct ucsi *ucsi, int index) ret = ucsi_register_port_psy(con); if (ret) - return ret; + goto out; /* Register the connector */ con->port = typec_register_port(ucsi->dev, cap); - if (IS_ERR(con->port)) - return PTR_ERR(con->port); + if (IS_ERR(con->port)) { + ret = PTR_ERR(con->port); + goto out; + } /* Alternate modes */ ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_CON); - if (ret) + if (ret) { dev_err(ucsi->dev, "con%d: failed to register alt modes\n", con->num); + goto out; + } /* Get the status */ command = UCSI_GET_CONNECTOR_STATUS | UCSI_CONNECTOR_NUMBER(con->num); - ret = ucsi_run_command(ucsi, command, &con->status, - sizeof(con->status)); + ret = ucsi_send_command(ucsi, command, &con->status, sizeof(con->status)); if (ret < 0) { dev_err(ucsi->dev, "con%d: failed to get status\n", con->num); - return 0; + ret = 0; + goto out; } + ret = 0; /* ucsi_send_command() returns length on success */ switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) { case UCSI_CONSTAT_PARTNER_TYPE_UFP: @@ -983,17 +998,21 @@ static int ucsi_register_port(struct ucsi *ucsi, int index) if (con->partner) { ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP); - if (ret) + if (ret) { dev_err(ucsi->dev, "con%d: failed to register alternate modes\n", con->num); - else + ret = 0; + } else { ucsi_altmode_update_active(con); + } } trace_ucsi_register_port(con->num, &con->status); - return 0; +out: + mutex_unlock(&con->lock); + return ret; } /** @@ -1009,8 +1028,6 @@ static int ucsi_init(struct ucsi *ucsi) int ret; int i; - mutex_lock(&ucsi->ppm_lock); - /* Reset the PPM */ ret = ucsi_reset_ppm(ucsi); if (ret) { @@ -1021,13 +1038,13 @@ static int ucsi_init(struct ucsi *ucsi) /* Enable basic notifications */ ucsi->ntfy = UCSI_ENABLE_NTFY_CMD_COMPLETE | UCSI_ENABLE_NTFY_ERROR; command = UCSI_SET_NOTIFICATION_ENABLE | ucsi->ntfy; - ret = ucsi_run_command(ucsi, command, NULL, 0); + ret = ucsi_send_command(ucsi, command, NULL, 0); if (ret < 0) goto err_reset; /* Get PPM capabilities */ command = UCSI_GET_CAPABILITY; - ret = ucsi_run_command(ucsi, command, &ucsi->cap, sizeof(ucsi->cap)); + ret = ucsi_send_command(ucsi, command, &ucsi->cap, sizeof(ucsi->cap)); if (ret < 0) goto err_reset; @@ -1054,12 +1071,10 @@ static int ucsi_init(struct ucsi *ucsi) /* Enable all notifications */ ucsi->ntfy = UCSI_ENABLE_NTFY_ALL; command = UCSI_SET_NOTIFICATION_ENABLE | ucsi->ntfy; - ret = ucsi_run_command(ucsi, command, NULL, 0); + ret = ucsi_send_command(ucsi, command, NULL, 0); if (ret < 0) goto err_unregister; - mutex_unlock(&ucsi->ppm_lock); - return 0; err_unregister: @@ -1074,8 +1089,6 @@ err_unregister: err_reset: ucsi_reset_ppm(ucsi); err: - mutex_unlock(&ucsi->ppm_lock); - return ret; } diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c index 9fc4f338e870..fbfe8f5933af 100644 --- a/drivers/usb/typec/ucsi/ucsi_acpi.c +++ b/drivers/usb/typec/ucsi/ucsi_acpi.c @@ -78,7 +78,7 @@ static int ucsi_acpi_sync_write(struct ucsi *ucsi, unsigned int offset, if (ret) goto out_clear_bit; - if (!wait_for_completion_timeout(&ua->complete, msecs_to_jiffies(5000))) + if (!wait_for_completion_timeout(&ua->complete, 60 * HZ)) ret = -ETIMEDOUT; out_clear_bit: @@ -112,11 +112,15 @@ static void ucsi_acpi_notify(acpi_handle handle, u32 event, void *data) static int ucsi_acpi_probe(struct platform_device *pdev) { + struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); struct ucsi_acpi *ua; struct resource *res; acpi_status status; int ret; + if (adev->dep_unmet) + return -EPROBE_DEFER; + ua = devm_kzalloc(&pdev->dev, sizeof(*ua), GFP_KERNEL); if (!ua) return -ENOMEM; |