Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 777 insertions, 0 deletions

diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
new file mode 100644
index 000000000000..be5d60bf90b9
--- /dev/null
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -0,0 +1,777 @@
+/*
+ * Definitions for the FTDI USB Single Port Serial Converter - 
+ * known as FTDI_SIO (Serial Input/Output application of the chipset) 
+ *
+ * The example I have is known as the USC-1000 which is available from
+ * http://www.dse.co.nz - cat no XH4214 It looks similar to this:
+ * http://www.dansdata.com/usbser.htm but I can't be sure There are other
+ * USC-1000s which don't look like my device though so beware!
+ *
+ * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, 
+ * USB on the other.
+ *
+ * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details
+ * of the protocol required to talk to the device and ongoing assistence
+ * during development.
+ *
+ * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the 
+ * FTDI_SIO implementation.
+ *
+ * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
+ * from Rudolf Gugler
+ *
+ */
+
+#define FTDI_VID	0x0403	/* Vendor Id */
+#define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX  */
+#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
+#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
+#define FTDI_8U232AM_ALT_ALT_PID 0xf3c0 /* FTDI's second alternate PID for above */
+#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
+#define FTDI_RELAIS_PID	0xFA10  /* Relais device from Rudolf Gugler */
+#define FTDI_NF_RIC_VID	0x0DCD	/* Vendor Id */
+#define FTDI_NF_RIC_PID	0x0001	/* Product Id */
+
+/* www.irtrans.de device */
+#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
+
+/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
+/* they use the ftdi chipset for the USB interface and the vendor id is the same */
+#define FTDI_XF_632_PID 0xFC08	/* 632: 16x2 Character Display */
+#define FTDI_XF_634_PID 0xFC09	/* 634: 20x4 Character Display */
+#define FTDI_XF_547_PID 0xFC0A	/* 547: Two line Display */
+#define FTDI_XF_633_PID 0xFC0B	/* 633: 16x2 Character Display with Keys */
+#define FTDI_XF_631_PID 0xFC0C	/* 631: 20x2 Character Display */
+#define FTDI_XF_635_PID 0xFC0D	/* 635: 20x4 Character Display */
+#define FTDI_XF_640_PID 0xFC0E	/* 640: Two line Display */
+#define FTDI_XF_642_PID 0xFC0F	/* 642: Two line Display */
+
+/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */
+/* broadband internet service.  The following PID is exhibited by the usb device supplied */
+/* (the VID is the standard ftdi vid (FTDI_VID) */
+#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
+
+/*
+ * The following are the values for the Matrix Orbital LCD displays,
+ * which are the FT232BM ( similar to the 8U232AM )
+ */
+#define FTDI_MTXORB_0_PID      0xFA00  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_1_PID      0xFA01  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_2_PID      0xFA02  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_3_PID      0xFA03  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_4_PID      0xFA04  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_5_PID      0xFA05  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_6_PID      0xFA06  /* Matrix Orbital Product Id */
+
+/* Interbiometrics USB I/O Board */
+/* Developed for Interbiometrics by Rudolf Gugler */
+#define INTERBIOMETRICS_VID              0x1209
+#define INTERBIOMETRICS_IOBOARD_PID      0x1002
+#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
+
+/*
+ * The following are the values for the Perle Systems
+ * UltraPort USB serial converters
+ */
+#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0	/* Perle UltraPort Product Id */
+
+/*
+ * The following are the values for the Sealevel SeaLINK+ adapters.
+ * (Original list sent by Tuan Hoang.  Ian Abbott renamed the macros and
+ * removed some PIDs that don't seem to match any existing products.)
+ */
+#define SEALEVEL_VID		0x0c52	/* Sealevel Vendor ID */
+#define SEALEVEL_2101_PID	0x2101	/* SeaLINK+232 (2101/2105) */
+#define SEALEVEL_2102_PID	0x2102	/* SeaLINK+485 (2102) */
+#define SEALEVEL_2103_PID	0x2103	/* SeaLINK+232I (2103) */
+#define SEALEVEL_2104_PID	0x2104	/* SeaLINK+485I (2104) */
+#define SEALEVEL_2201_1_PID	0x2211	/* SeaPORT+2/232 (2201) Port 1 */
+#define SEALEVEL_2201_2_PID	0x2221	/* SeaPORT+2/232 (2201) Port 2 */
+#define SEALEVEL_2202_1_PID	0x2212	/* SeaPORT+2/485 (2202) Port 1 */
+#define SEALEVEL_2202_2_PID	0x2222	/* SeaPORT+2/485 (2202) Port 2 */
+#define SEALEVEL_2203_1_PID	0x2213	/* SeaPORT+2 (2203) Port 1 */
+#define SEALEVEL_2203_2_PID	0x2223	/* SeaPORT+2 (2203) Port 2 */
+#define SEALEVEL_2401_1_PID	0x2411	/* SeaPORT+4/232 (2401) Port 1 */
+#define SEALEVEL_2401_2_PID	0x2421	/* SeaPORT+4/232 (2401) Port 2 */
+#define SEALEVEL_2401_3_PID	0x2431	/* SeaPORT+4/232 (2401) Port 3 */
+#define SEALEVEL_2401_4_PID	0x2441	/* SeaPORT+4/232 (2401) Port 4 */
+#define SEALEVEL_2402_1_PID	0x2412	/* SeaPORT+4/485 (2402) Port 1 */
+#define SEALEVEL_2402_2_PID	0x2422	/* SeaPORT+4/485 (2402) Port 2 */
+#define SEALEVEL_2402_3_PID	0x2432	/* SeaPORT+4/485 (2402) Port 3 */
+#define SEALEVEL_2402_4_PID	0x2442	/* SeaPORT+4/485 (2402) Port 4 */
+#define SEALEVEL_2403_1_PID	0x2413	/* SeaPORT+4 (2403) Port 1 */
+#define SEALEVEL_2403_2_PID	0x2423	/* SeaPORT+4 (2403) Port 2 */
+#define SEALEVEL_2403_3_PID	0x2433	/* SeaPORT+4 (2403) Port 3 */
+#define SEALEVEL_2403_4_PID	0x2443	/* SeaPORT+4 (2403) Port 4 */
+#define SEALEVEL_2801_1_PID	0X2811	/* SeaLINK+8/232 (2801) Port 1 */
+#define SEALEVEL_2801_2_PID	0X2821	/* SeaLINK+8/232 (2801) Port 2 */
+#define SEALEVEL_2801_3_PID	0X2831	/* SeaLINK+8/232 (2801) Port 3 */
+#define SEALEVEL_2801_4_PID	0X2841	/* SeaLINK+8/232 (2801) Port 4 */
+#define SEALEVEL_2801_5_PID	0X2851	/* SeaLINK+8/232 (2801) Port 5 */
+#define SEALEVEL_2801_6_PID	0X2861	/* SeaLINK+8/232 (2801) Port 6 */
+#define SEALEVEL_2801_7_PID	0X2871	/* SeaLINK+8/232 (2801) Port 7 */
+#define SEALEVEL_2801_8_PID	0X2881	/* SeaLINK+8/232 (2801) Port 8 */
+#define SEALEVEL_2802_1_PID	0X2812	/* SeaLINK+8/485 (2802) Port 1 */
+#define SEALEVEL_2802_2_PID	0X2822	/* SeaLINK+8/485 (2802) Port 2 */
+#define SEALEVEL_2802_3_PID	0X2832	/* SeaLINK+8/485 (2802) Port 3 */
+#define SEALEVEL_2802_4_PID	0X2842	/* SeaLINK+8/485 (2802) Port 4 */
+#define SEALEVEL_2802_5_PID	0X2852	/* SeaLINK+8/485 (2802) Port 5 */
+#define SEALEVEL_2802_6_PID	0X2862	/* SeaLINK+8/485 (2802) Port 6 */
+#define SEALEVEL_2802_7_PID	0X2872	/* SeaLINK+8/485 (2802) Port 7 */
+#define SEALEVEL_2802_8_PID	0X2882	/* SeaLINK+8/485 (2802) Port 8 */
+#define SEALEVEL_2803_1_PID	0X2813	/* SeaLINK+8 (2803) Port 1 */
+#define SEALEVEL_2803_2_PID	0X2823 	/* SeaLINK+8 (2803) Port 2 */
+#define SEALEVEL_2803_3_PID	0X2833 	/* SeaLINK+8 (2803) Port 3 */
+#define SEALEVEL_2803_4_PID	0X2843 	/* SeaLINK+8 (2803) Port 4 */
+#define SEALEVEL_2803_5_PID	0X2853 	/* SeaLINK+8 (2803) Port 5 */
+#define SEALEVEL_2803_6_PID	0X2863 	/* SeaLINK+8 (2803) Port 6 */
+#define SEALEVEL_2803_7_PID	0X2873 	/* SeaLINK+8 (2803) Port 7 */
+#define SEALEVEL_2803_8_PID	0X2883 	/* SeaLINK+8 (2803) Port 8 */
+
+/*
+ * DSS-20 Sync Station for Sony Ericsson P800
+ */
+ 
+#define FTDI_DSS20_PID          0xFC82  
+
+/*
+ * Home Electronics (www.home-electro.com) USB gadgets
+ */
+#define FTDI_HE_TIRA1_PID	0xFA78	/* Tira-1 IR tranceiver */
+
+/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
+/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
+#define FTDI_USB_UIRT_PID	0xF850	/* Product Id */
+
+/* ELV USB Module UO100 (PID sent by Stefan Frings) */
+#define FTDI_ELV_UO100_PID	0xFB58	/* Product Id */
+
+/*
+ * Definitions for ID TECH (www.idt-net.com) devices
+ */
+#define IDTECH_VID		0x0ACD	/* ID TECH Vendor ID */
+#define IDTECH_IDT1221U_PID	0x0300	/* IDT1221U USB to RS-232 adapter */
+
+/*
+ * Definitions for Omnidirectional Control Technology, Inc. devices
+ */
+#define OCT_VID			0x0B39	/* OCT vendor ID */
+/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
+/* Also rebadged as SIIG Inc. model US2308 */
+#define OCT_US101_PID		0x0421	/* OCT US101 USB to RS-232 */
+
+/* an infrared receiver for user access control with IR tags */
+#define FTDI_PIEGROUP_PID	0xF208	/* Product Id */
+
+/*
+ * Protego product ids
+ */
+#define PROTEGO_SPECIAL_1	0xFC70	/* special/unknown device */
+#define PROTEGO_R2X0		0xFC71	/* R200-USB TRNG unit (R210, R220, and R230) */
+#define PROTEGO_SPECIAL_3	0xFC72	/* special/unknown device */
+#define PROTEGO_SPECIAL_4	0xFC73	/* special/unknown device */
+
+/*
+ * Gude Analog- und Digitalsysteme GmbH
+ */
+#define FTDI_GUDEADS_E808_PID    0xE808
+#define FTDI_GUDEADS_E809_PID    0xE809
+#define FTDI_GUDEADS_E80A_PID    0xE80A
+#define FTDI_GUDEADS_E80B_PID    0xE80B
+#define FTDI_GUDEADS_E80C_PID    0xE80C
+#define FTDI_GUDEADS_E80D_PID    0xE80D
+#define FTDI_GUDEADS_E80E_PID    0xE80E
+#define FTDI_GUDEADS_E80F_PID    0xE80F
+#define FTDI_GUDEADS_E888_PID    0xE888  /* Expert ISDN Control USB */
+#define FTDI_GUDEADS_E889_PID    0xE889  /* USB RS-232 OptoBridge */
+#define FTDI_GUDEADS_E88A_PID    0xE88A
+#define FTDI_GUDEADS_E88B_PID    0xE88B
+#define FTDI_GUDEADS_E88C_PID    0xE88C
+#define FTDI_GUDEADS_E88D_PID    0xE88D
+#define FTDI_GUDEADS_E88E_PID    0xE88E
+#define FTDI_GUDEADS_E88F_PID    0xE88F
+
+/*
+ * Linx Technologies product ids
+ */
+#define LINX_SDMUSBQSS_PID	0xF448	/* Linx SDM-USB-QS-S */
+#define LINX_MASTERDEVEL2_PID   0xF449   /* Linx Master Development 2.0 */
+#define LINX_FUTURE_0_PID   0xF44A   /* Linx future device */
+#define LINX_FUTURE_1_PID   0xF44B   /* Linx future device */
+#define LINX_FUTURE_2_PID   0xF44C   /* Linx future device */
+
+/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */
+/* unit for PIC16's/PIC18's */
+#define FTDI_CCSICDU20_0_PID    0xF9D0     
+#define FTDI_CCSICDU40_1_PID    0xF9D1     
+
+/* Inside Accesso contactless reader (http://www.insidefr.com) */
+#define INSIDE_ACCESSO		0xFAD0
+
+/*
+ * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
+ */
+#define INTREPID_VID		0x093C
+#define INTREPID_VALUECAN_PID	0x0601
+#define INTREPID_NEOVI_PID	0x0701
+
+/*
+ * Falcom Wireless Communications GmbH
+ */
+#define FALCOM_VID		0x0F94	/* Vendor Id */
+#define FALCOM_TWIST_PID	0x0001	/* Falcom Twist USB GPRS modem */
+
+/*
+ * SUUNTO product ids
+ */
+#define FTDI_SUUNTO_SPORTS_PID	0xF680	/* Suunto Sports instrument */
+
+/*
+ * Definitions for B&B Electronics products.
+ */
+#define BANDB_VID		0x0856	/* B&B Electronics Vendor ID */
+#define BANDB_USOTL4_PID	0xAC01	/* USOTL4 Isolated RS-485 Converter */
+#define BANDB_USTL4_PID		0xAC02	/* USTL4 RS-485 Converter */
+#define BANDB_USO9ML2_PID	0xAC03	/* USO9ML2 Isolated RS-232 Converter */
+
+/*
+ * RM Michaelides CANview USB (http://www.rmcan.com)
+ * CAN filedbus interface adapter, addad by port GmbH www.port.de)
+ */
+#define FTDI_RM_VID		0x0403	/* Vendor  Id */
+#define FTDI_RMCANVIEW_PID	0xfd60	/* Product Id */
+
+/*
+ * EVER Eco Pro UPS (http://www.ever.com.pl/)
+ */
+
+#define	EVER_ECO_PRO_CDS	0xe520	/* RS-232 converter */
+
+/* Commands */
+#define FTDI_SIO_RESET 		0 /* Reset the port */
+#define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
+#define FTDI_SIO_SET_FLOW_CTRL	2 /* Set flow control register */
+#define FTDI_SIO_SET_BAUD_RATE	3 /* Set baud rate */
+#define FTDI_SIO_SET_DATA	4 /* Set the data characteristics of the port */
+#define FTDI_SIO_GET_MODEM_STATUS	5 /* Retrieve current value of modern status register */
+#define FTDI_SIO_SET_EVENT_CHAR	6 /* Set the event character */
+#define FTDI_SIO_SET_ERROR_CHAR	7 /* Set the error character */
+#define FTDI_SIO_SET_LATENCY_TIMER	9 /* Set the latency timer */
+#define FTDI_SIO_GET_LATENCY_TIMER	10 /* Get the latency timer */
+
+/* Port interface code for FT2232C */
+#define INTERFACE_A		1
+#define INTERFACE_B		2
+
+
+/*
+ *   BmRequestType:  1100 0000b
+ *   bRequest:       FTDI_E2_READ
+ *   wValue:         0
+ *   wIndex:         Address of word to read
+ *   wLength:        2
+ *   Data:           Will return a word of data from E2Address
+ *
+ */
+
+/* Port Identifier Table */
+#define PIT_DEFAULT 		0 /* SIOA */
+#define PIT_SIOA		1 /* SIOA */
+/* The device this driver is tested with one has only one port */
+#define PIT_SIOB		2 /* SIOB */
+#define PIT_PARALLEL		3 /* Parallel */
+
+/* FTDI_SIO_RESET */
+#define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET
+#define FTDI_SIO_RESET_REQUEST_TYPE 0x40
+#define FTDI_SIO_RESET_SIO 0
+#define FTDI_SIO_RESET_PURGE_RX 1
+#define FTDI_SIO_RESET_PURGE_TX 2
+
+/*
+ * BmRequestType:  0100 0000B
+ * bRequest:       FTDI_SIO_RESET
+ * wValue:         Control Value 
+ *                   0 = Reset SIO
+ *                   1 = Purge RX buffer
+ *                   2 = Purge TX buffer
+ * wIndex:         Port
+ * wLength:        0
+ * Data:           None
+ *
+ * The Reset SIO command has this effect:
+ *
+ *    Sets flow control set to 'none'
+ *    Event char = $0D
+ *    Event trigger = disabled
+ *    Purge RX buffer
+ *    Purge TX buffer
+ *    Clear DTR
+ *    Clear RTS
+ *    baud and data format not reset
+ *
+ * The Purge RX and TX buffer commands affect nothing except the buffers
+ *
+   */
+
+/* FTDI_SIO_SET_BAUDRATE */
+#define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40
+#define FTDI_SIO_SET_BAUDRATE_REQUEST 3
+
+/*
+ * BmRequestType:  0100 0000B
+ * bRequest:       FTDI_SIO_SET_BAUDRATE
+ * wValue:         BaudDivisor value - see below
+ * wIndex:         Port
+ * wLength:        0
+ * Data:           None
+ * The BaudDivisor values are calculated as follows:
+ * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish
+ *   I knew how to detect old chips to select proper base clock!
+ * - BaudDivisor is a fixed point number encoded in a funny way.
+ *   (--WRONG WAY OF THINKING--)
+ *   BaudDivisor is a fixed point number encoded with following bit weighs:
+ *   (-2)(-1)(13..0). It is a radical with a denominator of 4, so values
+ *   end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...).
+ *   (--THE REALITY--)
+ *   The both-bits-set has quite different meaning from 0.75 - the chip designers
+ *   have decided it to mean 0.125 instead of 0.75.
+ *   This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates
+ *   and Flow Control Consideration for USB to RS232".
+ * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should
+ *   automagically re-encode the resulting value to take fractions into consideration.
+ * As all values are integers, some bit twiddling is in order:
+ *   BaudDivisor = (BaseClock / 16 / BaudRate) |
+ *   (((BaseClock / 2 / BaudRate) & 4) ? 0x4000    // 0.5
+ *    : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000  // 0.25
+ *    : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000  // 0.125
+ *    : 0)
+ *
+ * For the FT232BM, a 17th divisor bit was introduced to encode the multiples
+ * of 0.125 missing from the FT8U232AM.  Bits 16 to 14 are coded as follows
+ * (the first four codes are the same as for the FT8U232AM, where bit 16 is
+ * always 0):
+ *   000 - add .000 to divisor
+ *   001 - add .500 to divisor
+ *   010 - add .250 to divisor
+ *   011 - add .125 to divisor
+ *   100 - add .375 to divisor
+ *   101 - add .625 to divisor
+ *   110 - add .750 to divisor
+ *   111 - add .875 to divisor
+ * Bits 15 to 0 of the 17-bit divisor are placed in the urb value.  Bit 16 is 
+ * placed in bit 0 of the urb index.
+ *
+ * Note that there are a couple of special cases to support the highest baud
+ * rates.  If the calculated divisor value is 1, this needs to be replaced with
+ * 0.  Additionally for the FT232BM, if the calculated divisor value is 0x4001
+ * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is
+ * not supported by the FT8U232AM).
+ */
+
+typedef enum {
+	SIO = 1,
+	FT8U232AM = 2,
+	FT232BM = 3,
+	FT2232C = 4,
+} ftdi_chip_type_t;
+
+typedef enum {
+ ftdi_sio_b300 = 0, 
+ ftdi_sio_b600 = 1, 
+ ftdi_sio_b1200 = 2,
+ ftdi_sio_b2400 = 3,
+ ftdi_sio_b4800 = 4,
+ ftdi_sio_b9600 = 5,
+ ftdi_sio_b19200 = 6,
+ ftdi_sio_b38400 = 7,
+ ftdi_sio_b57600 = 8,
+ ftdi_sio_b115200 = 9
+} FTDI_SIO_baudrate_t ;
+
+/*
+ * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values
+ * are calculated internally.
+ */
+
+#define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA
+#define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40
+#define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8 )
+#define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8 )
+#define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8 )
+#define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8 )
+#define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8 )
+#define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11 )
+#define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11 )
+#define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11 )
+#define FTDI_SIO_SET_BREAK (0x1 << 14)
+/* FTDI_SIO_SET_DATA */
+
+/*
+ * BmRequestType:  0100 0000B 
+ * bRequest:       FTDI_SIO_SET_DATA
+ * wValue:         Data characteristics (see below)
+ * wIndex:         Port
+ * wLength:        0
+ * Data:           No
+ *
+ * Data characteristics
+ *
+ *   B0..7   Number of data bits
+ *   B8..10  Parity
+ *           0 = None
+ *           1 = Odd
+ *           2 = Even
+ *           3 = Mark
+ *           4 = Space
+ *   B11..13 Stop Bits
+ *           0 = 1
+ *           1 = 1.5
+ *           2 = 2
+ *   B14
+ *           1 = TX ON (break)
+ *           0 = TX OFF (normal state)
+ *   B15 Reserved
+ *
+ */
+
+
+
+/* FTDI_SIO_MODEM_CTRL */
+#define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40
+#define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL
+
+/* 
+ * BmRequestType:   0100 0000B
+ * bRequest:        FTDI_SIO_MODEM_CTRL
+ * wValue:          ControlValue (see below)
+ * wIndex:          Port
+ * wLength:         0
+ * Data:            None
+ *
+ * NOTE: If the device is in RTS/CTS flow control, the RTS set by this
+ * command will be IGNORED without an error being returned
+ * Also - you can not set DTR and RTS with one control message
+ */
+
+#define FTDI_SIO_SET_DTR_MASK 0x1
+#define FTDI_SIO_SET_DTR_HIGH ( 1 | ( FTDI_SIO_SET_DTR_MASK  << 8))
+#define FTDI_SIO_SET_DTR_LOW  ( 0 | ( FTDI_SIO_SET_DTR_MASK  << 8))
+#define FTDI_SIO_SET_RTS_MASK 0x2
+#define FTDI_SIO_SET_RTS_HIGH ( 2 | ( FTDI_SIO_SET_RTS_MASK << 8 ))
+#define FTDI_SIO_SET_RTS_LOW ( 0 | ( FTDI_SIO_SET_RTS_MASK << 8 ))
+
+/*
+ * ControlValue
+ * B0    DTR state
+ *          0 = reset
+ *          1 = set
+ * B1    RTS state
+ *          0 = reset
+ *          1 = set
+ * B2..7 Reserved
+ * B8    DTR state enable
+ *          0 = ignore
+ *          1 = use DTR state
+ * B9    RTS state enable
+ *          0 = ignore
+ *          1 = use RTS state
+ * B10..15 Reserved
+ */
+
+/* FTDI_SIO_SET_FLOW_CTRL */
+#define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40
+#define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL
+#define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 
+#define FTDI_SIO_RTS_CTS_HS (0x1 << 8)
+#define FTDI_SIO_DTR_DSR_HS (0x2 << 8)
+#define FTDI_SIO_XON_XOFF_HS (0x4 << 8)
+/*
+ *   BmRequestType:  0100 0000b
+ *   bRequest:       FTDI_SIO_SET_FLOW_CTRL
+ *   wValue:         Xoff/Xon
+ *   wIndex:         Protocol/Port - hIndex is protocl / lIndex is port
+ *   wLength:        0 
+ *   Data:           None
+ *
+ * hIndex protocol is:
+ *   B0 Output handshaking using RTS/CTS
+ *       0 = disabled
+ *       1 = enabled
+ *   B1 Output handshaking using DTR/DSR
+ *       0 = disabled
+ *       1 = enabled
+ *   B2 Xon/Xoff handshaking
+ *       0 = disabled
+ *       1 = enabled
+ *
+ * A value of zero in the hIndex field disables handshaking
+ *
+ * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character 
+ * and the lValue field contains the XON character.
+ */  
+ 
+/*
+ * FTDI_SIO_GET_LATENCY_TIMER
+ *
+ * Set the timeout interval. The FTDI collects data from the slave
+ * device, transmitting it to the host when either A) 62 bytes are
+ * received, or B) the timeout interval has elapsed and the buffer
+ * contains at least 1 byte.  Setting this value to a small number
+ * can dramatically improve performance for applications which send
+ * small packets, since the default value is 16ms.
+ */
+#define  FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER
+#define  FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0
+
+/* 
+ *  BmRequestType:   1100 0000b
+ *  bRequest:        FTDI_SIO_GET_LATENCY_TIMER
+ *  wValue:          0
+ *  wIndex:          Port
+ *  wLength:         0
+ *  Data:            latency (on return)
+ */
+
+/* 
+ * FTDI_SIO_SET_LATENCY_TIMER
+ *
+ * Set the timeout interval. The FTDI collects data from the slave
+ * device, transmitting it to the host when either A) 62 bytes are
+ * received, or B) the timeout interval has elapsed and the buffer
+ * contains at least 1 byte.  Setting this value to a small number
+ * can dramatically improve performance for applications which send
+ * small packets, since the default value is 16ms.
+ */
+#define  FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER
+#define  FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40
+
+/* 
+ *  BmRequestType:   0100 0000b
+ *  bRequest:        FTDI_SIO_SET_LATENCY_TIMER
+ *  wValue:          Latency (milliseconds)
+ *  wIndex:          Port
+ *  wLength:         0
+ *  Data:            None
+ *
+ * wValue:
+ *   B0..7   Latency timer
+ *   B8..15  0
+ *
+ */
+
+/*
+ * FTDI_SIO_SET_EVENT_CHAR 
+ *
+ * Set the special event character for the specified communications port.
+ * If the device sees this character it will immediately return the
+ * data read so far - rather than wait 40ms or until 62 bytes are read
+ * which is what normally happens.
+ */
+
+
+#define  FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR
+#define  FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40
+
+
+/* 
+ *  BmRequestType:   0100 0000b
+ *  bRequest:        FTDI_SIO_SET_EVENT_CHAR
+ *  wValue:          EventChar
+ *  wIndex:          Port
+ *  wLength:         0
+ *  Data:            None
+ *
+ * wValue:
+ *   B0..7   Event Character
+ *   B8      Event Character Processing
+ *             0 = disabled
+ *             1 = enabled
+ *   B9..15  Reserved
+ *
+ */
+          
+/* FTDI_SIO_SET_ERROR_CHAR */
+
+/* Set the parity error replacement character for the specified communications port */
+
+/* 
+ *  BmRequestType:  0100 0000b
+ *  bRequest:       FTDI_SIO_SET_EVENT_CHAR
+ *  wValue:         Error Char
+ *  wIndex:         Port
+ *  wLength:        0
+ *  Data:           None
+ *
+ *Error Char
+ *  B0..7  Error Character
+ *  B8     Error Character Processing
+ *           0 = disabled
+ *           1 = enabled
+ *  B9..15 Reserved
+ *
+ */
+
+/* FTDI_SIO_GET_MODEM_STATUS */
+/* Retreive the current value of the modem status register */
+
+#define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0
+#define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS
+#define FTDI_SIO_CTS_MASK 0x10
+#define FTDI_SIO_DSR_MASK 0x20
+#define FTDI_SIO_RI_MASK  0x40
+#define FTDI_SIO_RLSD_MASK 0x80
+/* 
+ *   BmRequestType:   1100 0000b
+ *   bRequest:        FTDI_SIO_GET_MODEM_STATUS
+ *   wValue:          zero
+ *   wIndex:          Port
+ *   wLength:         1
+ *   Data:            Status
+ * 
+ * One byte of data is returned 
+ * B0..3 0
+ * B4    CTS
+ *         0 = inactive
+ *         1 = active
+ * B5    DSR
+ *         0 = inactive
+ *         1 = active
+ * B6    Ring Indicator (RI)
+ *         0 = inactive
+ *         1 = active
+ * B7    Receive Line Signal Detect (RLSD)
+ *         0 = inactive
+ *         1 = active 
+ */
+
+
+
+/* Descriptors returned by the device 
+ * 
+ *  Device Descriptor
+ * 
+ * Offset	Field		Size	Value	Description
+ * 0	bLength		1	0x12	Size of descriptor in bytes
+ * 1	bDescriptorType	1	0x01	DEVICE Descriptor Type
+ * 2	bcdUSB		2	0x0110	USB Spec Release Number
+ * 4	bDeviceClass	1	0x00	Class Code
+ * 5	bDeviceSubClass	1	0x00	SubClass Code
+ * 6	bDeviceProtocol	1	0x00	Protocol Code
+ * 7	bMaxPacketSize0 1	0x08	Maximum packet size for endpoint 0
+ * 8	idVendor	2	0x0403	Vendor ID
+ * 10	idProduct	2	0x8372	Product ID (FTDI_SIO_PID)
+ * 12	bcdDevice	2	0x0001	Device release number
+ * 14	iManufacturer	1	0x01	Index of man. string desc
+ * 15	iProduct	1	0x02	Index of prod string desc
+ * 16	iSerialNumber	1	0x02	Index of serial nmr string desc
+ * 17	bNumConfigurations 1    0x01	Number of possible configurations
+ * 
+ * Configuration Descriptor
+ * 
+ * Offset	Field			Size	Value
+ * 0	bLength			1	0x09	Size of descriptor in bytes
+ * 1	bDescriptorType		1	0x02	CONFIGURATION Descriptor Type
+ * 2	wTotalLength		2	0x0020	Total length of data
+ * 4	bNumInterfaces		1	0x01	Number of interfaces supported
+ * 5	bConfigurationValue	1	0x01	Argument for SetCOnfiguration() req
+ * 6	iConfiguration		1	0x02	Index of config string descriptor
+ * 7	bmAttributes		1	0x20	Config characteristics Remote Wakeup
+ * 8	MaxPower		1	0x1E	Max power consumption
+ * 
+ * Interface Descriptor
+ * 
+ * Offset	Field			Size	Value
+ * 0	bLength			1	0x09	Size of descriptor in bytes
+ * 1	bDescriptorType		1	0x04	INTERFACE Descriptor Type
+ * 2	bInterfaceNumber	1	0x00	Number of interface
+ * 3	bAlternateSetting	1	0x00	Value used to select alternate
+ * 4	bNumEndpoints		1	0x02	Number of endpoints
+ * 5	bInterfaceClass		1	0xFF	Class Code
+ * 6	bInterfaceSubClass	1	0xFF	Subclass Code
+ * 7	bInterfaceProtocol	1	0xFF	Protocol Code
+ * 8	iInterface		1	0x02	Index of interface string description
+ * 
+ * IN Endpoint Descriptor
+ * 
+ * Offset	Field			Size	Value
+ * 0	bLength			1	0x07	Size of descriptor in bytes
+ * 1	bDescriptorType		1	0x05	ENDPOINT descriptor type
+ * 2	bEndpointAddress	1	0x82	Address of endpoint
+ * 3	bmAttributes		1	0x02	Endpoint attributes - Bulk
+ * 4	bNumEndpoints		2	0x0040	maximum packet size
+ * 5	bInterval		1	0x00	Interval for polling endpoint
+ * 
+ * OUT Endpoint Descriptor
+ * 
+ * Offset	Field			Size	Value
+ * 0	bLength			1	0x07	Size of descriptor in bytes
+ * 1	bDescriptorType		1	0x05	ENDPOINT descriptor type
+ * 2	bEndpointAddress	1	0x02	Address of endpoint
+ * 3	bmAttributes		1	0x02	Endpoint attributes - Bulk
+ * 4	bNumEndpoints		2	0x0040	maximum packet size
+ * 5	bInterval		1	0x00	Interval for polling endpoint
+ *     
+ * DATA FORMAT
+ * 
+ * IN Endpoint
+ * 
+ * The device reserves the first two bytes of data on this endpoint to contain the current
+ * values of the modem and line status registers. In the absence of data, the device 
+ * generates a message consisting of these two status bytes every 40 ms
+ * 
+ * Byte 0: Modem Status
+ * 
+ * Offset	Description
+ * B0	Reserved - must be 1
+ * B1	Reserved - must be 0
+ * B2	Reserved - must be 0
+ * B3	Reserved - must be 0
+ * B4	Clear to Send (CTS)
+ * B5	Data Set Ready (DSR)
+ * B6	Ring Indicator (RI)
+ * B7	Receive Line Signal Detect (RLSD)
+ * 
+ * Byte 1: Line Status
+ * 
+ * Offset	Description
+ * B0	Data Ready (DR)
+ * B1	Overrun Error (OE)
+ * B2	Parity Error (PE)
+ * B3	Framing Error (FE)
+ * B4	Break Interrupt (BI)
+ * B5	Transmitter Holding Register (THRE)
+ * B6	Transmitter Empty (TEMT)
+ * B7	Error in RCVR FIFO
+ * 
+ */
+#define FTDI_RS0_CTS	(1 << 4)
+#define FTDI_RS0_DSR	(1 << 5)
+#define FTDI_RS0_RI	(1 << 6)
+#define FTDI_RS0_RLSD	(1 << 7)
+
+#define FTDI_RS_DR  1
+#define FTDI_RS_OE (1<<1)
+#define FTDI_RS_PE (1<<2)
+#define FTDI_RS_FE (1<<3)
+#define FTDI_RS_BI (1<<4)
+#define FTDI_RS_THRE (1<<5)
+#define FTDI_RS_TEMT (1<<6)
+#define FTDI_RS_FIFO  (1<<7)
+
+/*
+ * OUT Endpoint
+ * 
+ * This device reserves the first bytes of data on this endpoint contain the length
+ * and port identifier of the message. For the FTDI USB Serial converter the port 
+ * identifier is always 1.
+ * 
+ * Byte 0: Line Status
+ * 
+ * Offset	Description
+ * B0	Reserved - must be 1
+ * B1	Reserved - must be 0
+ * B2..7	Length of message - (not including Byte 0)
+ * 
+ */
+