staging: sm750fb: Replace POKE32 and PEEK32 by inline functions

POKE32 and PEEK32 have been replaced by inlined functions poke32 and
peek32.
Having inline functions instead of macros help to get the correct
type-checking and avoid the possible precedence issues reported by
checkpatch.

Signed-off-by: Matthieu Simon <gmatthsim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

10 files changed, 180 insertions, 173 deletions

diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index 9aaf1fdad08d..10cf7295dc6c 100644
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -38,7 +38,7 @@ static unsigned int get_mxclk_freq(void)
 	if (sm750_get_chip_type() == SM750LE)
 		return MHz(130);
 
-	pll_reg = PEEK32(MXCLK_PLL_CTRL);
+	pll_reg = peek32(MXCLK_PLL_CTRL);
 	M = (pll_reg & PLL_CTRL_M_MASK) >> PLL_CTRL_M_SHIFT;
 	N = (pll_reg & PLL_CTRL_N_MASK) >> PLL_CTRL_M_SHIFT;
 	OD = (pll_reg & PLL_CTRL_OD_MASK) >> PLL_CTRL_OD_SHIFT;
@@ -78,7 +78,7 @@ static void set_chip_clock(unsigned int frequency)
 		ulActualMxClk = sm750_calc_pll_value(frequency, &pll);
 
 		/* Master Clock Control: MXCLK_PLL */
-		POKE32(MXCLK_PLL_CTRL, sm750_format_pll_reg(&pll));
+		poke32(MXCLK_PLL_CTRL, sm750_format_pll_reg(&pll));
 	}
 }
 
@@ -105,7 +105,7 @@ static void set_memory_clock(unsigned int frequency)
 		divisor = DIV_ROUND_CLOSEST(get_mxclk_freq(), frequency);
 
 		/* Set the corresponding divisor in the register. */
-		reg = PEEK32(CURRENT_GATE) & ~CURRENT_GATE_M2XCLK_MASK;
+		reg = peek32(CURRENT_GATE) & ~CURRENT_GATE_M2XCLK_MASK;
 		switch (divisor) {
 		default:
 		case 1:
@@ -157,7 +157,7 @@ static void set_master_clock(unsigned int frequency)
 		divisor = DIV_ROUND_CLOSEST(get_mxclk_freq(), frequency);
 
 		/* Set the corresponding divisor in the register. */
-		reg = PEEK32(CURRENT_GATE) & ~CURRENT_GATE_MCLK_MASK;
+		reg = peek32(CURRENT_GATE) & ~CURRENT_GATE_MCLK_MASK;
 		switch (divisor) {
 		default:
 		case 3:
@@ -188,12 +188,12 @@ unsigned int ddk750_get_vm_size(void)
 		return SZ_64M;
 
 	/* for 750,always use power mode0*/
-	reg = PEEK32(MODE0_GATE);
+	reg = peek32(MODE0_GATE);
 	reg |= MODE0_GATE_GPIO;
-	POKE32(MODE0_GATE, reg);
+	poke32(MODE0_GATE, reg);
 
 	/* get frame buffer size from GPIO */
-	reg = PEEK32(MISC_CTRL) & MISC_CTRL_LOCALMEM_SIZE_MASK;
+	reg = peek32(MISC_CTRL) & MISC_CTRL_LOCALMEM_SIZE_MASK;
 	switch (reg) {
 	case MISC_CTRL_LOCALMEM_SIZE_8M:
 		data = SZ_8M;  break; /* 8  Mega byte */
@@ -219,15 +219,15 @@ int ddk750_init_hw(struct initchip_param *pInitParam)
 	sm750_set_power_mode(pInitParam->powerMode);
 
 	/* Enable display power gate & LOCALMEM power gate*/
-	reg = PEEK32(CURRENT_GATE);
+	reg = peek32(CURRENT_GATE);
 	reg |= (CURRENT_GATE_DISPLAY | CURRENT_GATE_LOCALMEM);
 	sm750_set_current_gate(reg);
 
 	if (sm750_get_chip_type() != SM750LE) {
 		/*	set panel pll and graphic mode via mmio_88 */
-		reg = PEEK32(VGA_CONFIGURATION);
+		reg = peek32(VGA_CONFIGURATION);
 		reg |= (VGA_CONFIGURATION_PLL | VGA_CONFIGURATION_MODE);
-		POKE32(VGA_CONFIGURATION, reg);
+		poke32(VGA_CONFIGURATION, reg);
 	} else {
 #if defined(__i386__) || defined(__x86_64__)
 		/* set graphic mode via IO method */
@@ -252,36 +252,36 @@ int ddk750_init_hw(struct initchip_param *pInitParam)
 	 * The memory should be resetted after changing the MXCLK.
 	 */
 	if (pInitParam->resetMemory == 1) {
-		reg = PEEK32(MISC_CTRL);
+		reg = peek32(MISC_CTRL);
 		reg &= ~MISC_CTRL_LOCALMEM_RESET;
-		POKE32(MISC_CTRL, reg);
+		poke32(MISC_CTRL, reg);
 
 		reg |= MISC_CTRL_LOCALMEM_RESET;
-		POKE32(MISC_CTRL, reg);
+		poke32(MISC_CTRL, reg);
 	}
 
 	if (pInitParam->setAllEngOff == 1) {
 		sm750_enable_2d_engine(0);
 
 		/* Disable Overlay, if a former application left it on */
-		reg = PEEK32(VIDEO_DISPLAY_CTRL);
+		reg = peek32(VIDEO_DISPLAY_CTRL);
 		reg &= ~DISPLAY_CTRL_PLANE;
-		POKE32(VIDEO_DISPLAY_CTRL, reg);
+		poke32(VIDEO_DISPLAY_CTRL, reg);
 
 		/* Disable video alpha, if a former application left it on */
-		reg = PEEK32(VIDEO_ALPHA_DISPLAY_CTRL);
+		reg = peek32(VIDEO_ALPHA_DISPLAY_CTRL);
 		reg &= ~DISPLAY_CTRL_PLANE;
-		POKE32(VIDEO_ALPHA_DISPLAY_CTRL, reg);
+		poke32(VIDEO_ALPHA_DISPLAY_CTRL, reg);
 
 		/* Disable alpha plane, if a former application left it on */
-		reg = PEEK32(ALPHA_DISPLAY_CTRL);
+		reg = peek32(ALPHA_DISPLAY_CTRL);
 		reg &= ~DISPLAY_CTRL_PLANE;
-		POKE32(ALPHA_DISPLAY_CTRL, reg);
+		poke32(ALPHA_DISPLAY_CTRL, reg);
 
 		/* Disable DMA Channel, if a former application left it on */
-		reg = PEEK32(DMA_ABORT_INTERRUPT);
+		reg = peek32(DMA_ABORT_INTERRUPT);
 		reg |= DMA_ABORT_INTERRUPT_ABORT_1;
-		POKE32(DMA_ABORT_INTERRUPT, reg);
+		poke32(DMA_ABORT_INTERRUPT, reg);
 
 		/* Disable DMA Power, if a former application left it on */
 		sm750_enable_dma(0);
diff --git a/drivers/staging/sm750fb/ddk750_chip.h b/drivers/staging/sm750fb/ddk750_chip.h
index e63b8b293816..fbeb615aa432 100644
--- a/drivers/staging/sm750fb/ddk750_chip.h
+++ b/drivers/staging/sm750fb/ddk750_chip.h
@@ -9,11 +9,18 @@
 #include <linux/ioport.h>
 #include <linux/uaccess.h>
 
+extern void __iomem *mmio750;
+
 /* software control endianness */
-#define PEEK32(addr) readl(addr + mmio750)
-#define POKE32(addr, data) writel(data, addr + mmio750)
+static inline u32 peek32(u32 addr)
+{
+	return readl(addr + mmio750);
+}
 
-extern void __iomem *mmio750;
+static inline void poke32(u32 data, u32 addr)
+{
+	writel(data, addr + mmio750);
+}
 
 /* This is all the chips recognized by this library */
 typedef enum _logical_chip_type_t {
diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index c347803f7e19..e4724a660d07 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -18,7 +18,7 @@ static void setDisplayControl(int ctrl, int disp_state)
 		reserved = CRT_DISPLAY_CTRL_RESERVED_MASK;
 	}
 
-	val = PEEK32(reg);
+	val = peek32(reg);
 	if (disp_state) {
 		/*
 		 * Timing should be enabled first before enabling the
@@ -27,7 +27,7 @@ static void setDisplayControl(int ctrl, int disp_state)
 		 * disabled.
 		 */
 		val |= DISPLAY_CTRL_TIMING;
-		POKE32(reg, val);
+		poke32(reg, val);
 
 		val |= DISPLAY_CTRL_PLANE;
 
@@ -38,8 +38,8 @@ static void setDisplayControl(int ctrl, int disp_state)
 		 */
 		do {
 			cnt++;
-			POKE32(reg, val);
-		} while ((PEEK32(reg) & ~reserved) != (val & ~reserved));
+			poke32(reg, val);
+		} while ((peek32(reg) & ~reserved) != (val & ~reserved));
 		pr_debug("Set Plane enbit:after tried %d times\n", cnt);
 	} else {
 		/*
@@ -52,10 +52,10 @@ static void setDisplayControl(int ctrl, int disp_state)
 		 * before modifying the timing enable bit.
 		 */
 		val &= ~DISPLAY_CTRL_PLANE;
-		POKE32(reg, val);
+		poke32(reg, val);
 
 		val &= ~DISPLAY_CTRL_TIMING;
-		POKE32(reg, val);
+		poke32(reg, val);
 	}
 }
 
@@ -67,19 +67,19 @@ static void primary_wait_vertical_sync(int delay)
 	 * Do not wait when the Primary PLL is off or display control is
 	 * already off. This will prevent the software to wait forever.
 	 */
-	if (!(PEEK32(PANEL_PLL_CTRL) & PLL_CTRL_POWER) ||
-	    !(PEEK32(PANEL_DISPLAY_CTRL) & DISPLAY_CTRL_TIMING))
+	if (!(peek32(PANEL_PLL_CTRL) & PLL_CTRL_POWER) ||
+	    !(peek32(PANEL_DISPLAY_CTRL) & DISPLAY_CTRL_TIMING))
 		return;
 
 	while (delay-- > 0) {
 		/* Wait for end of vsync. */
 		do {
-			status = PEEK32(SYSTEM_CTRL);
+			status = peek32(SYSTEM_CTRL);
 		} while (status & SYSTEM_CTRL_PANEL_VSYNC_ACTIVE);
 
 		/* Wait for start of vsync. */
 		do {
-			status = PEEK32(SYSTEM_CTRL);
+			status = peek32(SYSTEM_CTRL);
 		} while (!(status & SYSTEM_CTRL_PANEL_VSYNC_ACTIVE));
 	}
 }
@@ -89,24 +89,24 @@ static void swPanelPowerSequence(int disp, int delay)
 	unsigned int reg;
 
 	/* disp should be 1 to open sequence */
-	reg = PEEK32(PANEL_DISPLAY_CTRL);
+	reg = peek32(PANEL_DISPLAY_CTRL);
 	reg |= (disp ? PANEL_DISPLAY_CTRL_FPEN : 0);
-	POKE32(PANEL_DISPLAY_CTRL, reg);
+	poke32(PANEL_DISPLAY_CTRL, reg);
 	primary_wait_vertical_sync(delay);
 
-	reg = PEEK32(PANEL_DISPLAY_CTRL);
+	reg = peek32(PANEL_DISPLAY_CTRL);
 	reg |= (disp ? PANEL_DISPLAY_CTRL_DATA : 0);
-	POKE32(PANEL_DISPLAY_CTRL, reg);
+	poke32(PANEL_DISPLAY_CTRL, reg);
 	primary_wait_vertical_sync(delay);
 
-	reg = PEEK32(PANEL_DISPLAY_CTRL);
+	reg = peek32(PANEL_DISPLAY_CTRL);
 	reg |= (disp ? PANEL_DISPLAY_CTRL_VBIASEN : 0);
-	POKE32(PANEL_DISPLAY_CTRL, reg);
+	poke32(PANEL_DISPLAY_CTRL, reg);
 	primary_wait_vertical_sync(delay);
 
-	reg = PEEK32(PANEL_DISPLAY_CTRL);
+	reg = peek32(PANEL_DISPLAY_CTRL);
 	reg |= (disp ? PANEL_DISPLAY_CTRL_FPEN : 0);
-	POKE32(PANEL_DISPLAY_CTRL, reg);
+	poke32(PANEL_DISPLAY_CTRL, reg);
 	primary_wait_vertical_sync(delay);
 }
 
@@ -116,22 +116,22 @@ void ddk750_setLogicalDispOut(disp_output_t output)
 
 	if (output & PNL_2_USAGE) {
 		/* set panel path controller select */
-		reg = PEEK32(PANEL_DISPLAY_CTRL);
+		reg = peek32(PANEL_DISPLAY_CTRL);
 		reg &= ~PANEL_DISPLAY_CTRL_SELECT_MASK;
 		reg |= (((output & PNL_2_MASK) >> PNL_2_OFFSET) <<
 			PANEL_DISPLAY_CTRL_SELECT_SHIFT);
-		POKE32(PANEL_DISPLAY_CTRL, reg);
+		poke32(PANEL_DISPLAY_CTRL, reg);
 	}
 
 	if (output & CRT_2_USAGE) {
 		/* set crt path controller select */
-		reg = PEEK32(CRT_DISPLAY_CTRL);
+		reg = peek32(CRT_DISPLAY_CTRL);
 		reg &= ~CRT_DISPLAY_CTRL_SELECT_MASK;
 		reg |= (((output & CRT_2_MASK) >> CRT_2_OFFSET) <<
 			CRT_DISPLAY_CTRL_SELECT_SHIFT);
 		/*se blank off */
 		reg &= ~CRT_DISPLAY_CTRL_BLANK;
-		POKE32(CRT_DISPLAY_CTRL, reg);
+		poke32(CRT_DISPLAY_CTRL, reg);
 	}
 
 	if (output & PRI_TP_USAGE) {
diff --git a/drivers/staging/sm750fb/ddk750_hwi2c.c b/drivers/staging/sm750fb/ddk750_hwi2c.c
index 05d4a73aa1d4..68716ef7cb06 100644
--- a/drivers/staging/sm750fb/ddk750_hwi2c.c
+++ b/drivers/staging/sm750fb/ddk750_hwi2c.c
@@ -15,10 +15,10 @@ unsigned char bus_speed_mode
 	unsigned int value;
 
 	/* Enable GPIO 30 & 31 as IIC clock & data */
-	value = PEEK32(GPIO_MUX);
+	value = peek32(GPIO_MUX);
 
 	value |= (GPIO_MUX_30 | GPIO_MUX_31);
-	POKE32(GPIO_MUX, value);
+	poke32(GPIO_MUX, value);
 
 	/*
 	 * Enable Hardware I2C power.
@@ -27,11 +27,11 @@ unsigned char bus_speed_mode
 	sm750_enable_i2c(1);
 
 	/* Enable the I2C Controller and set the bus speed mode */
-	value = PEEK32(I2C_CTRL) & ~(I2C_CTRL_MODE | I2C_CTRL_EN);
+	value = peek32(I2C_CTRL) & ~(I2C_CTRL_MODE | I2C_CTRL_EN);
 	if (bus_speed_mode)
 		value |= I2C_CTRL_MODE;
 	value |= I2C_CTRL_EN;
-	POKE32(I2C_CTRL, value);
+	poke32(I2C_CTRL, value);
 
 	return 0;
 }
@@ -41,17 +41,17 @@ void sm750_hw_i2c_close(void)
 	unsigned int value;
 
 	/* Disable I2C controller */
-	value = PEEK32(I2C_CTRL) & ~I2C_CTRL_EN;
-	POKE32(I2C_CTRL, value);
+	value = peek32(I2C_CTRL) & ~I2C_CTRL_EN;
+	poke32(I2C_CTRL, value);
 
 	/* Disable I2C Power */
 	sm750_enable_i2c(0);
 
 	/* Set GPIO 30 & 31 back as GPIO pins */
-	value = PEEK32(GPIO_MUX);
+	value = peek32(GPIO_MUX);
 	value &= ~GPIO_MUX_30;
 	value &= ~GPIO_MUX_31;
-	POKE32(GPIO_MUX, value);
+	poke32(GPIO_MUX, value);
 }
 
 static long hw_i2c_wait_tx_done(void)
@@ -60,7 +60,7 @@ static long hw_i2c_wait_tx_done(void)
 
 	/* Wait until the transfer is completed. */
 	timeout = HWI2C_WAIT_TIMEOUT;
-	while (!(PEEK32(I2C_STATUS) & I2C_STATUS_TX) && (timeout != 0))
+	while (!(peek32(I2C_STATUS) & I2C_STATUS_TX) && (timeout != 0))
 		timeout--;
 
 	if (timeout == 0)
@@ -91,7 +91,7 @@ static unsigned int hw_i2c_write_data(
 	unsigned int total_bytes = 0;
 
 	/* Set the Device Address */
-	POKE32(I2C_SLAVE_ADDRESS, addr & ~0x01);
+	poke32(I2C_SLAVE_ADDRESS, addr & ~0x01);
 
 	/*
 	 * Write data.
@@ -103,21 +103,21 @@ static unsigned int hw_i2c_write_data(
 		 * Reset I2C by writing 0 to I2C_RESET register to
 		 * clear the previous status.
 		 */
-		POKE32(I2C_RESET, 0);
+		poke32(I2C_RESET, 0);
 
 		/* Set the number of bytes to be written */
 		if (length < MAX_HWI2C_FIFO)
 			count = length - 1;
 		else
 			count = MAX_HWI2C_FIFO - 1;
-		POKE32(I2C_BYTE_COUNT, count);
+		poke32(I2C_BYTE_COUNT, count);
 
 		/* Move the data to the I2C data register */
 		for (i = 0; i <= count; i++)
-			POKE32(I2C_DATA0 + i, *buf++);
+			poke32(I2C_DATA0 + i, *buf++);
 
 		/* Start the I2C */
-		POKE32(I2C_CTRL, PEEK32(I2C_CTRL) | I2C_CTRL_CTRL);
+		poke32(I2C_CTRL, peek32(I2C_CTRL) | I2C_CTRL_CTRL);
 
 		/* Wait until the transfer is completed. */
 		if (hw_i2c_wait_tx_done() != 0)
@@ -158,7 +158,7 @@ static unsigned int hw_i2c_read_data(
 	unsigned int total_bytes = 0;
 
 	/* Set the Device Address */
-	POKE32(I2C_SLAVE_ADDRESS, addr | 0x01);
+	poke32(I2C_SLAVE_ADDRESS, addr | 0x01);
 
 	/*
 	 * Read data and save them to the buffer.
@@ -170,17 +170,17 @@ static unsigned int hw_i2c_read_data(
 		 * Reset I2C by writing 0 to I2C_RESET register to
 		 * clear all the status.
 		 */
-		POKE32(I2C_RESET, 0);
+		poke32(I2C_RESET, 0);
 
 		/* Set the number of bytes to be read */
 		if (length <= MAX_HWI2C_FIFO)
 			count = length - 1;
 		else
 			count = MAX_HWI2C_FIFO - 1;
-		POKE32(I2C_BYTE_COUNT, count);
+		poke32(I2C_BYTE_COUNT, count);
 
 		/* Start the I2C */
-		POKE32(I2C_CTRL, PEEK32(I2C_CTRL) | I2C_CTRL_CTRL);
+		poke32(I2C_CTRL, peek32(I2C_CTRL) | I2C_CTRL_CTRL);
 
 		/* Wait until transaction done. */
 		if (hw_i2c_wait_tx_done() != 0)
@@ -188,7 +188,7 @@ static unsigned int hw_i2c_read_data(
 
 		/* Save the data to the given buffer */
 		for (i = 0; i <= count; i++)
-			*buf++ = PEEK32(I2C_DATA0 + i);
+			*buf++ = peek32(I2C_DATA0 + i);
 
 		/* Subtract length by 16 */
 		length -= (count + 1);
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 4a4b1de97a87..1df7d57dea6d 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -25,9 +25,9 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
 	 * Note that normal SM750/SM718 only use those two register for
 	 * auto-centering mode.
 	 */
-	POKE32(CRT_AUTO_CENTERING_TL, 0);
+	poke32(CRT_AUTO_CENTERING_TL, 0);
 
-	POKE32(CRT_AUTO_CENTERING_BR,
+	poke32(CRT_AUTO_CENTERING_BR,
 		(((y - 1) << CRT_AUTO_CENTERING_BR_BOTTOM_SHIFT) &
 			CRT_AUTO_CENTERING_BR_BOTTOM_MASK) |
 		((x - 1) & CRT_AUTO_CENTERING_BR_RIGHT_MASK));
@@ -66,7 +66,7 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
 	/* Set bit 14 of display controller */
 	dispControl |= DISPLAY_CTRL_CLOCK_PHASE;
 
-	POKE32(CRT_DISPLAY_CTRL, dispControl);
+	poke32(CRT_DISPLAY_CTRL, dispControl);
 
 	return dispControl;
 }
@@ -83,29 +83,29 @@ static int programModeRegisters(mode_parameter_t *pModeParam,
 
 	if (pll->clockType == SECONDARY_PLL) {
 		/* programe secondary pixel clock */
-		POKE32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
-		POKE32(CRT_HORIZONTAL_TOTAL,
+		poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
+		poke32(CRT_HORIZONTAL_TOTAL,
 			(((pModeParam->horizontal_total - 1) <<
 				CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
 				CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
 			((pModeParam->horizontal_display_end - 1) &
 				CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
 
-		POKE32(CRT_HORIZONTAL_SYNC,
+		poke32(CRT_HORIZONTAL_SYNC,
 			((pModeParam->horizontal_sync_width <<
 				CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
 				CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
 			((pModeParam->horizontal_sync_start - 1) &
 				CRT_HORIZONTAL_SYNC_START_MASK));
 
-		POKE32(CRT_VERTICAL_TOTAL,
+		poke32(CRT_VERTICAL_TOTAL,
 			(((pModeParam->vertical_total - 1) <<
 				CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
 				CRT_VERTICAL_TOTAL_TOTAL_MASK) |
 			((pModeParam->vertical_display_end - 1) &
 				CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
 
-		POKE32(CRT_VERTICAL_SYNC,
+		poke32(CRT_VERTICAL_SYNC,
 			((pModeParam->vertical_sync_height <<
 				CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
 				CRT_VERTICAL_SYNC_HEIGHT_MASK) |
@@ -122,41 +122,41 @@ static int programModeRegisters(mode_parameter_t *pModeParam,
 		if (sm750_get_chip_type() == SM750LE) {
 			displayControlAdjust_SM750LE(pModeParam, tmp);
 		} else {
-			reg = PEEK32(CRT_DISPLAY_CTRL) &
+			reg = peek32(CRT_DISPLAY_CTRL) &
 				~(DISPLAY_CTRL_VSYNC_PHASE |
 				  DISPLAY_CTRL_HSYNC_PHASE |
 				  DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE);
 
-			 POKE32(CRT_DISPLAY_CTRL, tmp | reg);
+			 poke32(CRT_DISPLAY_CTRL, tmp | reg);
 		}
 
 	} else if (pll->clockType == PRIMARY_PLL) {
 		unsigned int reserved;
 
-		POKE32(PANEL_PLL_CTRL, sm750_format_pll_reg(pll));
+		poke32(PANEL_PLL_CTRL, sm750_format_pll_reg(pll));
 
 		reg = ((pModeParam->horizontal_total - 1) <<
 			PANEL_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
 			PANEL_HORIZONTAL_TOTAL_TOTAL_MASK;
 		reg |= ((pModeParam->horizontal_display_end - 1) &
 			PANEL_HORIZONTAL_TOTAL_DISPLAY_END_MASK);
-		POKE32(PANEL_HORIZONTAL_TOTAL, reg);
+		poke32(PANEL_HORIZONTAL_TOTAL, reg);
 
-		POKE32(PANEL_HORIZONTAL_SYNC,
+		poke32(PANEL_HORIZONTAL_SYNC,
 			((pModeParam->horizontal_sync_width <<
 				PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT) &
 				PANEL_HORIZONTAL_SYNC_WIDTH_MASK) |
 			((pModeParam->horizontal_sync_start - 1) &
 				PANEL_HORIZONTAL_SYNC_START_MASK));
 
-		POKE32(PANEL_VERTICAL_TOTAL,
+		poke32(PANEL_VERTICAL_TOTAL,
 			(((pModeParam->vertical_total - 1) <<
 				PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) &
 				PANEL_VERTICAL_TOTAL_TOTAL_MASK) |
 			((pModeParam->vertical_display_end - 1) &
 				PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK));
 
-		POKE32(PANEL_VERTICAL_SYNC,
+		poke32(PANEL_VERTICAL_SYNC,
 			((pModeParam->vertical_sync_height <<
 				PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) &
 				PANEL_VERTICAL_SYNC_HEIGHT_MASK) |
@@ -174,7 +174,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam,
 		reserved = PANEL_DISPLAY_CTRL_RESERVED_MASK |
 			PANEL_DISPLAY_CTRL_VSYNC;
 
-		reg = (PEEK32(PANEL_DISPLAY_CTRL) & ~reserved) &
+		reg = (peek32(PANEL_DISPLAY_CTRL) & ~reserved) &
 			~(DISPLAY_CTRL_CLOCK_PHASE | DISPLAY_CTRL_VSYNC_PHASE |
 			  DISPLAY_CTRL_HSYNC_PHASE | DISPLAY_CTRL_TIMING |
 			  DISPLAY_CTRL_PLANE);
@@ -187,14 +187,14 @@ static int programModeRegisters(mode_parameter_t *pModeParam,
 		 * Note: This problem happens by design. The hardware will wait
 		 *       for the next vertical sync to turn on/off the plane.
 		 */
-		POKE32(PANEL_DISPLAY_CTRL, tmp | reg);
+		poke32(PANEL_DISPLAY_CTRL, tmp | reg);
 
-		while ((PEEK32(PANEL_DISPLAY_CTRL) & ~reserved) !=
+		while ((peek32(PANEL_DISPLAY_CTRL) & ~reserved) !=
 			(tmp | reg)) {
 			cnt++;
 			if (cnt > 1000)
 				break;
-			POKE32(PANEL_DISPLAY_CTRL, tmp | reg);
+			poke32(PANEL_DISPLAY_CTRL, tmp | reg);
 		}
 	} else {
 		ret = -1;
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index 6167e30e8e01..02ff6204ee1e 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -7,13 +7,13 @@ void ddk750_set_dpms(DPMS_t state)
 	unsigned int value;
 
 	if (sm750_get_chip_type() == SM750LE) {
-		value = PEEK32(CRT_DISPLAY_CTRL) & ~CRT_DISPLAY_CTRL_DPMS_MASK;
+		value = peek32(CRT_DISPLAY_CTRL) & ~CRT_DISPLAY_CTRL_DPMS_MASK;
 		value |= (state << CRT_DISPLAY_CTRL_DPMS_SHIFT);
-		POKE32(CRT_DISPLAY_CTRL, value);
+		poke32(CRT_DISPLAY_CTRL, value);
 	} else {
-		value = PEEK32(SYSTEM_CTRL);
+		value = peek32(SYSTEM_CTRL);
 		value = (value & ~SYSTEM_CTRL_DPMS_MASK) | state;
-		POKE32(SYSTEM_CTRL, value);
+		poke32(SYSTEM_CTRL, value);
 	}
 }
 
@@ -21,7 +21,7 @@ static unsigned int get_power_mode(void)
 {
 	if (sm750_get_chip_type() == SM750LE)
 		return 0;
-	return PEEK32(POWER_MODE_CTRL) & POWER_MODE_CTRL_MODE_MASK;
+	return peek32(POWER_MODE_CTRL) & POWER_MODE_CTRL_MODE_MASK;
 }
 
 
@@ -33,7 +33,7 @@ void sm750_set_power_mode(unsigned int mode)
 {
 	unsigned int ctrl = 0;
 
-	ctrl = PEEK32(POWER_MODE_CTRL) & ~POWER_MODE_CTRL_MODE_MASK;
+	ctrl = peek32(POWER_MODE_CTRL) & ~POWER_MODE_CTRL_MODE_MASK;
 
 	if (sm750_get_chip_type() == SM750LE)
 		return;
@@ -69,15 +69,15 @@ void sm750_set_power_mode(unsigned int mode)
 	}
 
 	/* Program new power mode. */
-	POKE32(POWER_MODE_CTRL, ctrl);
+	poke32(POWER_MODE_CTRL, ctrl);
 }
 
 void sm750_set_current_gate(unsigned int gate)
 {
 	if (get_power_mode() == POWER_MODE_CTRL_MODE_MODE1)
-		POKE32(MODE1_GATE, gate);
+		poke32(MODE1_GATE, gate);
 	else
-		POKE32(MODE0_GATE, gate);
+		poke32(MODE0_GATE, gate);
 }
 
 
@@ -89,7 +89,7 @@ void sm750_enable_2d_engine(unsigned int enable)
 {
 	u32 gate;
 
-	gate = PEEK32(CURRENT_GATE);
+	gate = peek32(CURRENT_GATE);
 	if (enable)
 		gate |= (CURRENT_GATE_DE | CURRENT_GATE_CSC);
 	else
@@ -103,7 +103,7 @@ void sm750_enable_dma(unsigned int enable)
 	u32 gate;
 
 	/* Enable DMA Gate */
-	gate = PEEK32(CURRENT_GATE);
+	gate = peek32(CURRENT_GATE);
 	if (enable)
 		gate |= CURRENT_GATE_DMA;
 	else
@@ -120,7 +120,7 @@ void sm750_enable_gpio(unsigned int enable)
 	u32 gate;
 
 	/* Enable GPIO Gate */
-	gate = PEEK32(CURRENT_GATE);
+	gate = peek32(CURRENT_GATE);
 	if (enable)
 		gate |= CURRENT_GATE_GPIO;
 	else
@@ -137,7 +137,7 @@ void sm750_enable_i2c(unsigned int enable)
 	u32 gate;
 
 	/* Enable I2C Gate */
-	gate = PEEK32(CURRENT_GATE);
+	gate = peek32(CURRENT_GATE);
 	if (enable)
 		gate |= CURRENT_GATE_I2C;
 	else
diff --git a/drivers/staging/sm750fb/ddk750_power.h b/drivers/staging/sm750fb/ddk750_power.h
index eb088b0d805f..4274d74d47c1 100644
--- a/drivers/staging/sm750fb/ddk750_power.h
+++ b/drivers/staging/sm750fb/ddk750_power.h
@@ -10,8 +10,8 @@ typedef enum _DPMS_t {
 DPMS_t;
 
 #define setDAC(off) {							\
-	POKE32(MISC_CTRL,						\
-	       (PEEK32(MISC_CTRL) & ~MISC_CTRL_DAC_POWER_OFF) | (off)); \
+	poke32(MISC_CTRL,						\
+	       (peek32(MISC_CTRL) & ~MISC_CTRL_DAC_POWER_OFF) | (off)); \
 }
 
 void ddk750_set_dpms(DPMS_t);
diff --git a/drivers/staging/sm750fb/ddk750_swi2c.c b/drivers/staging/sm750fb/ddk750_swi2c.c
index b8a4e44359af..a4ac07cd50cb 100644
--- a/drivers/staging/sm750fb/ddk750_swi2c.c
+++ b/drivers/staging/sm750fb/ddk750_swi2c.c
@@ -119,23 +119,23 @@ static void sw_i2c_scl(unsigned char value)
 	unsigned long gpio_data;
 	unsigned long gpio_dir;
 
-	gpio_dir = PEEK32(sw_i2c_clk_gpio_data_dir_reg);
+	gpio_dir = peek32(sw_i2c_clk_gpio_data_dir_reg);
 	if (value) {    /* High */
 		/*
 		 * Set direction as input. This will automatically
 		 * pull the signal up.
 		 */
 		gpio_dir &= ~(1 << sw_i2c_clk_gpio);
-		POKE32(sw_i2c_clk_gpio_data_dir_reg, gpio_dir);
+		poke32(sw_i2c_clk_gpio_data_dir_reg, gpio_dir);
 	} else {        /* Low */
 		/* Set the signal down */
-		gpio_data = PEEK32(sw_i2c_clk_gpio_data_reg);
+		gpio_data = peek32(sw_i2c_clk_gpio_data_reg);
 		gpio_data &= ~(1 << sw_i2c_clk_gpio);
-		POKE32(sw_i2c_clk_gpio_data_reg, gpio_data);
+		poke32(sw_i2c_clk_gpio_data_reg, gpio_data);
 
 		/* Set direction as output */
 		gpio_dir |= (1 << sw_i2c_clk_gpio);
-		POKE32(sw_i2c_clk_gpio_data_dir_reg, gpio_dir);
+		poke32(sw_i2c_clk_gpio_data_dir_reg, gpio_dir);
 	}
 }
 
@@ -156,23 +156,23 @@ static void sw_i2c_sda(unsigned char value)
 	unsigned long gpio_data;
 	unsigned long gpio_dir;
 
-	gpio_dir = PEEK32(sw_i2c_data_gpio_data_dir_reg);
+	gpio_dir = peek32(sw_i2c_data_gpio_data_dir_reg);
 	if (value) {    /* High */
 		/*
 		 * Set direction as input. This will automatically
 		 * pull the signal up.
 		 */
 		gpio_dir &= ~(1 << sw_i2c_data_gpio);
-		POKE32(sw_i2c_data_gpio_data_dir_reg, gpio_dir);
+		poke32(sw_i2c_data_gpio_data_dir_reg, gpio_dir);
 	} else {        /* Low */
 		/* Set the signal down */
-		gpio_data = PEEK32(sw_i2c_data_gpio_data_reg);
+		gpio_data = peek32(sw_i2c_data_gpio_data_reg);
 		gpio_data &= ~(1 << sw_i2c_data_gpio);
-		POKE32(sw_i2c_data_gpio_data_reg, gpio_data);
+		poke32(sw_i2c_data_gpio_data_reg, gpio_data);
 
 		/* Set direction as output */
 		gpio_dir |= (1 << sw_i2c_data_gpio);
-		POKE32(sw_i2c_data_gpio_data_dir_reg, gpio_dir);
+		poke32(sw_i2c_data_gpio_data_dir_reg, gpio_dir);
 	}
 }
 
@@ -189,14 +189,14 @@ static unsigned char sw_i2c_read_sda(void)
 	unsigned long dir_mask = 1 << sw_i2c_data_gpio;
 
 	/* Make sure that the direction is input (High) */
-	gpio_dir = PEEK32(sw_i2c_data_gpio_data_dir_reg);
+	gpio_dir = peek32(sw_i2c_data_gpio_data_dir_reg);
 	if ((gpio_dir & dir_mask) != ~dir_mask) {
 		gpio_dir &= ~(1 << sw_i2c_data_gpio);
-		POKE32(sw_i2c_data_gpio_data_dir_reg, gpio_dir);
+		poke32(sw_i2c_data_gpio_data_dir_reg, gpio_dir);
 	}
 
 	/* Now read the SDA line */
-	gpio_data = PEEK32(sw_i2c_data_gpio_data_reg);
+	gpio_data = peek32(sw_i2c_data_gpio_data_reg);
 	if (gpio_data & (1 << sw_i2c_data_gpio))
 		return 1;
 	else
@@ -422,10 +422,10 @@ long sm750_sw_i2c_init(
 	sw_i2c_data_gpio = data_gpio;
 
 	/* Enable the GPIO pins for the i2c Clock and Data (GPIO MUX) */
-	POKE32(sw_i2c_clk_gpio_mux_reg,
-	       PEEK32(sw_i2c_clk_gpio_mux_reg) & ~(1 << sw_i2c_clk_gpio));
-	POKE32(sw_i2c_data_gpio_mux_reg,
-	       PEEK32(sw_i2c_data_gpio_mux_reg) & ~(1 << sw_i2c_data_gpio));
+	poke32(sw_i2c_clk_gpio_mux_reg,
+	       peek32(sw_i2c_clk_gpio_mux_reg) & ~(1 << sw_i2c_clk_gpio));
+	poke32(sw_i2c_data_gpio_mux_reg,
+	       peek32(sw_i2c_data_gpio_mux_reg) & ~(1 << sw_i2c_data_gpio));
 
 	/* Enable GPIO power */
 	sm750_enable_gpio(1);
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index 2a13353fc492..b1651b0d2034 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -20,7 +20,7 @@
 
 
 
-#define POKE32(addr, data) \
+#define poke32(addr, data) \
 writel((data), cursor->mmio + (addr))
 
 /* cursor control for voyager and 718/750*/
@@ -52,11 +52,11 @@ void sm750_hw_cursor_enable(struct lynx_cursor *cursor)
 	u32 reg;
 
 	reg = (cursor->offset & HWC_ADDRESS_ADDRESS_MASK) | HWC_ADDRESS_ENABLE;
-	POKE32(HWC_ADDRESS, reg);
+	poke32(HWC_ADDRESS, reg);
 }
 void sm750_hw_cursor_disable(struct lynx_cursor *cursor)
 {
-	POKE32(HWC_ADDRESS, 0);
+	poke32(HWC_ADDRESS, 0);
 }
 
 void sm750_hw_cursor_setSize(struct lynx_cursor *cursor,
@@ -72,7 +72,7 @@ void sm750_hw_cursor_setPos(struct lynx_cursor *cursor,
 
 	reg = (((y << HWC_LOCATION_Y_SHIFT) & HWC_LOCATION_Y_MASK) |
 		(x & HWC_LOCATION_X_MASK));
-	POKE32(HWC_LOCATION, reg);
+	poke32(HWC_LOCATION, reg);
 }
 void sm750_hw_cursor_setColor(struct lynx_cursor *cursor,
 						u32 fg, u32 bg)
@@ -80,8 +80,8 @@ void sm750_hw_cursor_setColor(struct lynx_cursor *cursor,
 	u32 reg = (fg << HWC_COLOR_12_2_RGB565_SHIFT) &
 		HWC_COLOR_12_2_RGB565_MASK;
 
-	POKE32(HWC_COLOR_12, reg | (bg & HWC_COLOR_12_1_RGB565_MASK));
-	POKE32(HWC_COLOR_3, 0xffe0);
+	poke32(HWC_COLOR_12, reg | (bg & HWC_COLOR_12_1_RGB565_MASK));
+	poke32(HWC_COLOR_3, 0xffe0);
 }
 
 void sm750_hw_cursor_setData(struct lynx_cursor *cursor,
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index b6af3b53076b..fab3fc9c8330 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -108,30 +108,30 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
 	ddk750_init_hw((struct initchip_param *)&sm750_dev->initParm);
 	/* for sm718, open pci burst */
 	if (sm750_dev->devid == 0x718) {
-		POKE32(SYSTEM_CTRL,
-		       PEEK32(SYSTEM_CTRL) | SYSTEM_CTRL_PCI_BURST);
+		poke32(SYSTEM_CTRL,
+		       peek32(SYSTEM_CTRL) | SYSTEM_CTRL_PCI_BURST);
 	}
 
 	if (sm750_get_chip_type() != SM750LE) {
 		unsigned int val;
 		/* does user need CRT? */
 		if (sm750_dev->nocrt) {
-			POKE32(MISC_CTRL,
-			       PEEK32(MISC_CTRL) | MISC_CTRL_DAC_POWER_OFF);
+			poke32(MISC_CTRL,
+			       peek32(MISC_CTRL) | MISC_CTRL_DAC_POWER_OFF);
 			/* shut off dpms */
-			val = PEEK32(SYSTEM_CTRL) & ~SYSTEM_CTRL_DPMS_MASK;
+			val = peek32(SYSTEM_CTRL) & ~SYSTEM_CTRL_DPMS_MASK;
 			val |= SYSTEM_CTRL_DPMS_VPHN;
-			POKE32(SYSTEM_CTRL, val);
+			poke32(SYSTEM_CTRL, val);
 		} else {
-			POKE32(MISC_CTRL,
-			       PEEK32(MISC_CTRL) & ~MISC_CTRL_DAC_POWER_OFF);
+			poke32(MISC_CTRL,
+			       peek32(MISC_CTRL) & ~MISC_CTRL_DAC_POWER_OFF);
 			/* turn on dpms */
-			val = PEEK32(SYSTEM_CTRL) & ~SYSTEM_CTRL_DPMS_MASK;
+			val = peek32(SYSTEM_CTRL) & ~SYSTEM_CTRL_DPMS_MASK;
 			val |= SYSTEM_CTRL_DPMS_VPHP;
-			POKE32(SYSTEM_CTRL, val);
+			poke32(SYSTEM_CTRL, val);
 		}
 
-		val = PEEK32(PANEL_DISPLAY_CTRL) &
+		val = peek32(PANEL_DISPLAY_CTRL) &
 			~(PANEL_DISPLAY_CTRL_DUAL_DISPLAY |
 			  PANEL_DISPLAY_CTRL_DOUBLE_PIXEL);
 		switch (sm750_dev->pnltype) {
@@ -144,7 +144,7 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
 			val |= PANEL_DISPLAY_CTRL_DUAL_DISPLAY;
 			break;
 		}
-		POKE32(PANEL_DISPLAY_CTRL, val);
+		poke32(PANEL_DISPLAY_CTRL, val);
 	} else {
 		/*
 		 * for 750LE, no DVI chip initialization
@@ -211,9 +211,9 @@ int hw_sm750_output_setMode(struct lynxfb_output *output,
 		/* just open DISPLAY_CONTROL_750LE register bit 3:0 */
 		u32 reg;
 
-		reg = PEEK32(DISPLAY_CONTROL_750LE);
+		reg = peek32(DISPLAY_CONTROL_750LE);
 		reg |= 0xf;
-		POKE32(DISPLAY_CONTROL_750LE, reg);
+		poke32(DISPLAY_CONTROL_750LE, reg);
 	}
 
 	pr_info("ddk setlogicdispout done\n");
@@ -312,7 +312,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
 
 	if (crtc->channel != sm750_secondary) {
 		/* set pitch, offset, width, start address, etc... */
-		POKE32(PANEL_FB_ADDRESS,
+		poke32(PANEL_FB_ADDRESS,
 		       crtc->oScreen & PANEL_FB_ADDRESS_ADDRESS_MASK);
 
 		reg = var->xres * (var->bits_per_pixel >> 3);
@@ -324,32 +324,32 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
 		reg = (reg << PANEL_FB_WIDTH_WIDTH_SHIFT) &
 		       PANEL_FB_WIDTH_WIDTH_MASK;
 		reg |= (fix->line_length & PANEL_FB_WIDTH_OFFSET_MASK);
-		POKE32(PANEL_FB_WIDTH, reg);
+		poke32(PANEL_FB_WIDTH, reg);
 
 		reg = ((var->xres - 1) << PANEL_WINDOW_WIDTH_WIDTH_SHIFT) &
 		       PANEL_WINDOW_WIDTH_WIDTH_MASK;
 		reg |= (var->xoffset & PANEL_WINDOW_WIDTH_X_MASK);
-		POKE32(PANEL_WINDOW_WIDTH, reg);
+		poke32(PANEL_WINDOW_WIDTH, reg);
 
 		reg = (var->yres_virtual - 1) <<
 		      PANEL_WINDOW_HEIGHT_HEIGHT_SHIFT;
 		reg &= PANEL_WINDOW_HEIGHT_HEIGHT_MASK;
 		reg |= (var->yoffset & PANEL_WINDOW_HEIGHT_Y_MASK);
-		POKE32(PANEL_WINDOW_HEIGHT, reg);
+		poke32(PANEL_WINDOW_HEIGHT, reg);
 
-		POKE32(PANEL_PLANE_TL, 0);
+		poke32(PANEL_PLANE_TL, 0);
 
 		reg = ((var->yres - 1) << PANEL_PLANE_BR_BOTTOM_SHIFT) &
 		       PANEL_PLANE_BR_BOTTOM_MASK;
 		reg |= ((var->xres - 1) & PANEL_PLANE_BR_RIGHT_MASK);
-		POKE32(PANEL_PLANE_BR, reg);
+		poke32(PANEL_PLANE_BR, reg);
 
 		/* set pixel format */
-		reg = PEEK32(PANEL_DISPLAY_CTRL);
-		POKE32(PANEL_DISPLAY_CTRL, reg | (var->bits_per_pixel >> 4));
+		reg = peek32(PANEL_DISPLAY_CTRL);
+		poke32(PANEL_DISPLAY_CTRL, reg | (var->bits_per_pixel >> 4));
 	} else {
 		/* not implemented now */
-		POKE32(CRT_FB_ADDRESS, crtc->oScreen);
+		poke32(CRT_FB_ADDRESS, crtc->oScreen);
 		reg = var->xres * (var->bits_per_pixel >> 3);
 		/*
 		 * crtc->channel is not equal to par->index on numeric,
@@ -358,13 +358,13 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
 		reg = ALIGN(reg, crtc->line_pad) << CRT_FB_WIDTH_WIDTH_SHIFT;
 		reg &= CRT_FB_WIDTH_WIDTH_MASK;
 		reg |= (fix->line_length & CRT_FB_WIDTH_OFFSET_MASK);
-		POKE32(CRT_FB_WIDTH, reg);
+		poke32(CRT_FB_WIDTH, reg);
 
 		/* SET PIXEL FORMAT */
-		reg = PEEK32(CRT_DISPLAY_CTRL);
+		reg = peek32(CRT_DISPLAY_CTRL);
 		reg |= ((var->bits_per_pixel >> 4) &
 			CRT_DISPLAY_CTRL_FORMAT_MASK);
-		POKE32(CRT_DISPLAY_CTRL, reg);
+		poke32(CRT_DISPLAY_CTRL, reg);
 	}
 
 exit:
@@ -376,7 +376,7 @@ int hw_sm750_setColReg(struct lynxfb_crtc *crtc, ushort index,
 {
 	static unsigned int add[] = {PANEL_PALETTE_RAM, CRT_PALETTE_RAM};
 
-	POKE32(add[crtc->channel] + index * 4,
+	poke32(add[crtc->channel] + index * 4,
 	       (red << 16) | (green << 8) | blue);
 	return 0;
 }
@@ -413,11 +413,11 @@ int hw_sm750le_setBLANK(struct lynxfb_output *output, int blank)
 	if (output->paths & sm750_crt) {
 		unsigned int val;
 
-		val = PEEK32(CRT_DISPLAY_CTRL) & ~CRT_DISPLAY_CTRL_DPMS_MASK;
-		POKE32(CRT_DISPLAY_CTRL, val | dpms);
+		val = peek32(CRT_DISPLAY_CTRL) & ~CRT_DISPLAY_CTRL_DPMS_MASK;
+		poke32(CRT_DISPLAY_CTRL, val | dpms);
 
-		val = PEEK32(CRT_DISPLAY_CTRL) & ~CRT_DISPLAY_CTRL_BLANK;
-		POKE32(CRT_DISPLAY_CTRL, val | crtdb);
+		val = peek32(CRT_DISPLAY_CTRL) & ~CRT_DISPLAY_CTRL_BLANK;
+		poke32(CRT_DISPLAY_CTRL, val | crtdb);
 	}
 	return 0;
 }
@@ -456,20 +456,20 @@ int hw_sm750_setBLANK(struct lynxfb_output *output, int blank)
 	}
 
 	if (output->paths & sm750_crt) {
-		unsigned int val = PEEK32(SYSTEM_CTRL) & ~SYSTEM_CTRL_DPMS_MASK;
+		unsigned int val = peek32(SYSTEM_CTRL) & ~SYSTEM_CTRL_DPMS_MASK;
 
-		POKE32(SYSTEM_CTRL, val | dpms);
+		poke32(SYSTEM_CTRL, val | dpms);
 
-		val = PEEK32(CRT_DISPLAY_CTRL) & ~CRT_DISPLAY_CTRL_BLANK;
-		POKE32(CRT_DISPLAY_CTRL, val | crtdb);
+		val = peek32(CRT_DISPLAY_CTRL) & ~CRT_DISPLAY_CTRL_BLANK;
+		poke32(CRT_DISPLAY_CTRL, val | crtdb);
 	}
 
 	if (output->paths & sm750_panel) {
-		unsigned int val = PEEK32(PANEL_DISPLAY_CTRL);
+		unsigned int val = peek32(PANEL_DISPLAY_CTRL);
 
 		val &= ~PANEL_DISPLAY_CTRL_DATA;
 		val |= pps;
-		POKE32(PANEL_DISPLAY_CTRL, val);
+		poke32(PANEL_DISPLAY_CTRL, val);
 	}
 
 	return 0;
@@ -482,23 +482,23 @@ void hw_sm750_initAccel(struct sm750_dev *sm750_dev)
 	sm750_enable_2d_engine(1);
 
 	if (sm750_get_chip_type() == SM750LE) {
-		reg = PEEK32(DE_STATE1);
+		reg = peek32(DE_STATE1);
 		reg |= DE_STATE1_DE_ABORT;
-		POKE32(DE_STATE1, reg);
+		poke32(DE_STATE1, reg);
 
-		reg = PEEK32(DE_STATE1);
+		reg = peek32(DE_STATE1);
 		reg &= ~DE_STATE1_DE_ABORT;
-		POKE32(DE_STATE1, reg);
+		poke32(DE_STATE1, reg);
 
 	} else {
 		/* engine reset */
-		reg = PEEK32(SYSTEM_CTRL);
+		reg = peek32(SYSTEM_CTRL);
 		reg |= SYSTEM_CTRL_DE_ABORT;
-		POKE32(SYSTEM_CTRL, reg);
+		poke32(SYSTEM_CTRL, reg);
 
-		reg = PEEK32(SYSTEM_CTRL);
+		reg = peek32(SYSTEM_CTRL);
 		reg &= ~SYSTEM_CTRL_DE_ABORT;
-		POKE32(SYSTEM_CTRL, reg);
+		poke32(SYSTEM_CTRL, reg);
 	}
 
 	/* call 2d init */
@@ -512,7 +512,7 @@ int hw_sm750le_deWait(void)
 		DE_STATE2_DE_MEM_FIFO_EMPTY;
 
 	while (i--) {
-		unsigned int val = PEEK32(DE_STATE2);
+		unsigned int val = peek32(DE_STATE2);
 
 		if ((val & mask) ==
 		    (DE_STATE2_DE_FIFO_EMPTY | DE_STATE2_DE_MEM_FIFO_EMPTY))
@@ -530,7 +530,7 @@ int hw_sm750_deWait(void)
 		SYSTEM_CTRL_DE_MEM_FIFO_EMPTY;
 
 	while (i--) {
-		unsigned int val = PEEK32(SYSTEM_CTRL);
+		unsigned int val = peek32(SYSTEM_CTRL);
 
 		if ((val & mask) ==
 		    (SYSTEM_CTRL_DE_FIFO_EMPTY | SYSTEM_CTRL_DE_MEM_FIFO_EMPTY))
@@ -555,12 +555,12 @@ int hw_sm750_pan_display(struct lynxfb_crtc *crtc,
 		((var->xoffset * var->bits_per_pixel) >> 3);
 	total += crtc->oScreen;
 	if (crtc->channel == sm750_primary) {
-		POKE32(PANEL_FB_ADDRESS,
-		       PEEK32(PANEL_FB_ADDRESS) |
+		poke32(PANEL_FB_ADDRESS,
+		       peek32(PANEL_FB_ADDRESS) |
 		       (total & PANEL_FB_ADDRESS_ADDRESS_MASK));
 	} else {
-		POKE32(CRT_FB_ADDRESS,
-		       PEEK32(CRT_FB_ADDRESS) |
+		poke32(CRT_FB_ADDRESS,
+		       peek32(CRT_FB_ADDRESS) |
 		       (total & CRT_FB_ADDRESS_ADDRESS_MASK));
 	}
 	return 0;