diff options
author | Vladimir Oltean <vladimir.oltean@nxp.com> | 2020-03-18 02:15:56 +0200 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2020-03-18 22:44:57 +0000 |
commit | 0dedf901078074d6c5b41c297fac12c02c6dc41f (patch) | |
tree | 42cc105d125066c2db5d7c58b95b509e31530bee /drivers/spi/spi-fsl-dspi.c | |
parent | c6c1e30a789b08de2e075cbd9705e81af3d2c7cc (diff) |
spi: spi-fsl-dspi: Protect against races on dspi->words_in_flight
dspi->words_in_flight is a variable populated in the *_write functions
and used in the dspi_fifo_read function. It is also used in
dspi_fifo_write, immediately after transmission, to update the
message->actual_length variable used by higher layers such as spi-mem
for integrity checking.
But it may happen that the IRQ which calls dspi_fifo_read to be
triggered before the updating of message->actual_length takes place. In
that case, dspi_fifo_read will decrement dspi->words_in_flight to -1,
and that will cause an invalid modification of message->actual_length.
For that, we make the simplest fix possible: to not decrement the actual
shared variable in dspi->words_in_flight from dspi_fifo_read, but
actually a copy of it which is on stack.
But even if dspi_fifo_read from the next IRQ does not interfere with the
dspi_fifo_write of the current chunk, the *next* dspi_fifo_write still
can. So we must assume that everything after the last write to the TX
FIFO can be preempted by the "TX complete" IRQ, and the dspi_fifo_write
function must be safe against that. This means refactoring the 2
flavours of FIFO writes (for EOQ and XSPI) such that the calculation of
the number of words to be written is common and happens a priori. This
way, the code for updating the message->actual_length variable works
with a copy and not with the volatile dspi->words_in_flight.
After some interior debate, the dspi->progress variable used for
software timestamping was *not* backed up against preemption in a copy
on stack. Because if preemption does occur between
spi_take_timestamp_pre and spi_take_timestamp_post, there's really no
point in trying to save anything. The first-in-time
spi_take_timestamp_post call with a dspi->progress higher than the
requested xfer->ptp_sts_word_post will trigger xfer->timestamped = true
anyway and will close the deal.
To understand the above a bit better, consider a transfer with
xfer->ptp_sts_word_pre = xfer->ptp_sts_word_post = 3, and
xfer->bits_per_words = 8 (so byte 3 needs to be timestamped). The DSPI
controller timestamps in chunks of 4 bytes at a time, and preemption
occurs in the middle of timestamping the first chunk:
spi_take_timestamp_pre(0)
.
. (preemption)
.
. spi_take_timestamp_pre(4)
.
. spi_take_timestamp_post(7)
.
spi_take_timestamp_post(3)
So the reason I'm not bothering to back up dspi->progress for that
spi_take_timestamp_post(3) is that spi_take_timestamp_post(7) is going
to (a) be more honest, (b) provide better accuracy and (c) already
render the spi_take_timestamp_post(3) into a noop by setting
xfer->timestamped = true anyway.
Fixes: d59c90a2400f ("spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode")
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20200318001603.9650-6-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi/spi-fsl-dspi.c')
-rw-r--r-- | drivers/spi/spi-fsl-dspi.c | 111 |
1 files changed, 52 insertions, 59 deletions
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 51224b772680..f7e1e7085e31 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -669,17 +669,26 @@ static void dspi_pushr_txdata_write(struct fsl_dspi *dspi, u16 txdata) regmap_write(dspi->regmap_pushr, dspi->pushr_tx, txdata); } -static void dspi_xspi_write(struct fsl_dspi *dspi, int cnt, bool eoq) +static void dspi_xspi_fifo_write(struct fsl_dspi *dspi, int num_words) { + int num_bytes = num_words * dspi->oper_word_size; u16 tx_cmd = dspi->tx_cmd; - if (eoq) + /* + * If the PCS needs to de-assert (i.e. we're at the end of the buffer + * and cs_change does not want the PCS to stay on), then we need a new + * PUSHR command, since this one (for the body of the buffer) + * necessarily has the CONT bit set. + * So send one word less during this go, to force a split and a command + * with a single word next time, when CONT will be unset. + */ + if (!(dspi->tx_cmd & SPI_PUSHR_CMD_CONT) && num_bytes == dspi->len) tx_cmd |= SPI_PUSHR_CMD_EOQ; /* Update CTARE */ regmap_write(dspi->regmap, SPI_CTARE(0), SPI_FRAME_EBITS(dspi->oper_bits_per_word) | - SPI_CTARE_DTCP(cnt)); + SPI_CTARE_DTCP(num_words)); /* * Write the CMD FIFO entry first, and then the two @@ -688,7 +697,7 @@ static void dspi_xspi_write(struct fsl_dspi *dspi, int cnt, bool eoq) dspi_pushr_cmd_write(dspi, tx_cmd); /* Fill TX FIFO with as many transfers as possible */ - while (cnt--) { + while (num_words--) { u32 data = dspi_pop_tx(dspi); dspi_pushr_txdata_write(dspi, data & 0xFFFF); @@ -697,58 +706,15 @@ static void dspi_xspi_write(struct fsl_dspi *dspi, int cnt, bool eoq) } } -static void dspi_xspi_fifo_write(struct fsl_dspi *dspi) -{ - int num_fifo_entries = dspi->devtype_data->fifo_size; - int bytes_in_flight; - bool eoq = false; - - /* In XSPI mode each 32-bit word occupies 2 TX FIFO entries */ - if (dspi->oper_word_size == 4) - num_fifo_entries /= 2; - - /* - * Integer division intentionally trims off odd (or non-multiple of 4) - * numbers of bytes at the end of the buffer, which will be sent next - * time using a smaller oper_word_size. - */ - dspi->words_in_flight = dspi->len / dspi->oper_word_size; - - if (dspi->words_in_flight > num_fifo_entries) - dspi->words_in_flight = num_fifo_entries; - - bytes_in_flight = dspi->words_in_flight * dspi->oper_word_size; - - /* - * If the PCS needs to de-assert (i.e. we're at the end of the buffer - * and cs_change does not want the PCS to stay on), then we need a new - * PUSHR command, since this one (for the body of the buffer) - * necessarily has the CONT bit set. - * So send one word less during this go, to force a split and a command - * with a single word next time, when CONT will be unset. - */ - if (!(dspi->tx_cmd & SPI_PUSHR_CMD_CONT) && - bytes_in_flight == dspi->len) - eoq = true; - - dspi_xspi_write(dspi, dspi->words_in_flight, eoq); -} - -static void dspi_eoq_fifo_write(struct fsl_dspi *dspi) +static void dspi_eoq_fifo_write(struct fsl_dspi *dspi, int num_words) { - int num_fifo_entries = dspi->devtype_data->fifo_size; u16 xfer_cmd = dspi->tx_cmd; - if (num_fifo_entries * dspi->oper_word_size > dspi->len) - num_fifo_entries = dspi->len / dspi->oper_word_size; - - dspi->words_in_flight = num_fifo_entries; - /* Fill TX FIFO with as many transfers as possible */ - while (num_fifo_entries--) { + while (num_words--) { dspi->tx_cmd = xfer_cmd; /* Request EOQF for last transfer in FIFO */ - if (num_fifo_entries == 0) + if (num_words == 0) dspi->tx_cmd |= SPI_PUSHR_CMD_EOQ; /* Write combined TX FIFO and CMD FIFO entry */ dspi_pushr_write(dspi); @@ -765,8 +731,10 @@ static u32 dspi_popr_read(struct fsl_dspi *dspi) static void dspi_fifo_read(struct fsl_dspi *dspi) { + int num_fifo_entries = dspi->words_in_flight; + /* Read one FIFO entry and push to rx buffer */ - while (dspi->words_in_flight--) + while (num_fifo_entries--) dspi_push_rx(dspi, dspi_popr_read(dspi)); } @@ -832,23 +800,48 @@ no_accel: static void dspi_fifo_write(struct fsl_dspi *dspi) { + int num_fifo_entries = dspi->devtype_data->fifo_size; struct spi_transfer *xfer = dspi->cur_transfer; struct spi_message *msg = dspi->cur_msg; - int bytes_sent; + int num_words, num_bytes; dspi_setup_accel(dspi); + /* In XSPI mode each 32-bit word occupies 2 TX FIFO entries */ + if (dspi->oper_word_size == 4) + num_fifo_entries /= 2; + + /* + * Integer division intentionally trims off odd (or non-multiple of 4) + * numbers of bytes at the end of the buffer, which will be sent next + * time using a smaller oper_word_size. + */ + num_words = dspi->len / dspi->oper_word_size; + if (num_words > num_fifo_entries) + num_words = num_fifo_entries; + + /* Update total number of bytes that were transferred */ + num_bytes = num_words * dspi->oper_word_size; + msg->actual_length += num_bytes; + dspi->progress += num_bytes / DIV_ROUND_UP(xfer->bits_per_word, 8); + + /* + * Update shared variable for use in the next interrupt (both in + * dspi_fifo_read and in dspi_fifo_write). + */ + dspi->words_in_flight = num_words; + spi_take_timestamp_pre(dspi->ctlr, xfer, dspi->progress, !dspi->irq); if (dspi->devtype_data->trans_mode == DSPI_EOQ_MODE) - dspi_eoq_fifo_write(dspi); + dspi_eoq_fifo_write(dspi, num_words); else - dspi_xspi_fifo_write(dspi); - - /* Update total number of bytes that were transferred */ - bytes_sent = dspi->words_in_flight * dspi->oper_word_size; - msg->actual_length += bytes_sent; - dspi->progress += bytes_sent / DIV_ROUND_UP(xfer->bits_per_word, 8); + dspi_xspi_fifo_write(dspi, num_words); + /* + * Everything after this point is in a potential race with the next + * interrupt, so we must never use dspi->words_in_flight again since it + * might already be modified by the next dspi_fifo_write. + */ spi_take_timestamp_post(dspi->ctlr, dspi->cur_transfer, dspi->progress, !dspi->irq); |