summaryrefslogtreecommitdiff
path: root/drivers/soc
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2019-09-20 13:33:40 +0200
committerArnd Bergmann <arnd@arndb.de>2022-05-07 22:56:16 +0200
commit64dbc4dd7a7cc6642c522963a6194b62480e2a68 (patch)
tree9f8baa0b70be0f72ec3a8901b4ac63f40b4abd7d /drivers/soc
parent6922a3d14e85040c022bbad23af4de5c03557e21 (diff)
ARM: pxa: move plat-pxa to drivers/soc/
There are two drivers in arch/arm/plat-pxa: mfp and ssp. Both of them should ideally not be needed at all, as there are proper subsystems to replace them. OTOH, they are self-contained and can simply be normal SoC drivers, so move them over there to eliminate one more of the plat-* directories. Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> (mach-pxa) Acked-by: Lubomir Rintel <lkundrak@v3.sk> (mach-mmp) Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'drivers/soc')
-rw-r--r--drivers/soc/Kconfig1
-rw-r--r--drivers/soc/Makefile1
-rw-r--r--drivers/soc/pxa/Kconfig8
-rw-r--r--drivers/soc/pxa/Makefile6
-rw-r--r--drivers/soc/pxa/mfp.c282
-rw-r--r--drivers/soc/pxa/ssp.c231
6 files changed, 529 insertions, 0 deletions
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index c5aae42673d3..86ccf5970bc1 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -14,6 +14,7 @@ source "drivers/soc/ixp4xx/Kconfig"
source "drivers/soc/litex/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/microchip/Kconfig"
+source "drivers/soc/pxa/Kconfig"
source "drivers/soc/qcom/Kconfig"
source "drivers/soc/renesas/Kconfig"
source "drivers/soc/rockchip/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 904eec2a7871..fd7717d597fc 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_SOC_XWAY) += lantiq/
obj-$(CONFIG_LITEX_SOC_CONTROLLER) += litex/
obj-y += mediatek/
obj-y += microchip/
+obj-y += pxa/
obj-y += amlogic/
obj-y += qcom/
obj-y += renesas/
diff --git a/drivers/soc/pxa/Kconfig b/drivers/soc/pxa/Kconfig
new file mode 100644
index 000000000000..c5c265aa4f07
--- /dev/null
+++ b/drivers/soc/pxa/Kconfig
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config PLAT_PXA
+ bool
+
+config PXA_SSP
+ tristate
+ help
+ Enable support for PXA2xx SSP ports
diff --git a/drivers/soc/pxa/Makefile b/drivers/soc/pxa/Makefile
new file mode 100644
index 000000000000..413deceddbdd
--- /dev/null
+++ b/drivers/soc/pxa/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_PXA3xx) += mfp.o
+obj-$(CONFIG_ARCH_MMP) += mfp.o
+
+obj-$(CONFIG_PXA_SSP) += ssp.o
diff --git a/drivers/soc/pxa/mfp.c b/drivers/soc/pxa/mfp.c
new file mode 100644
index 000000000000..6220ba321cfc
--- /dev/null
+++ b/drivers/soc/pxa/mfp.c
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/plat-pxa/mfp.c
+ *
+ * Multi-Function Pin Support
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <linux/soc/pxa/mfp.h>
+
+#define MFPR_SIZE (PAGE_SIZE)
+
+/* MFPR register bit definitions */
+#define MFPR_PULL_SEL (0x1 << 15)
+#define MFPR_PULLUP_EN (0x1 << 14)
+#define MFPR_PULLDOWN_EN (0x1 << 13)
+#define MFPR_SLEEP_SEL (0x1 << 9)
+#define MFPR_SLEEP_OE_N (0x1 << 7)
+#define MFPR_EDGE_CLEAR (0x1 << 6)
+#define MFPR_EDGE_FALL_EN (0x1 << 5)
+#define MFPR_EDGE_RISE_EN (0x1 << 4)
+
+#define MFPR_SLEEP_DATA(x) ((x) << 8)
+#define MFPR_DRIVE(x) (((x) & 0x7) << 10)
+#define MFPR_AF_SEL(x) (((x) & 0x7) << 0)
+
+#define MFPR_EDGE_NONE (0)
+#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN)
+#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN)
+#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL)
+
+/*
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel
+ * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15)
+ *
+ * Input 0 X(0) X(0) X(0) 0
+ * Drive 0 0 0 0 X(1) 0
+ * Drive 1 0 1 X(1) 0 0
+ * Pull hi (1) 1 X(1) 1 0 0
+ * Pull lo (0) 1 X(0) 0 1 0
+ * Z (float) 1 X(0) 0 0 0
+ */
+#define MFPR_LPM_INPUT (0)
+#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
+#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
+#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N)
+#define MFPR_LPM_MASK (0xe080)
+
+/*
+ * The pullup and pulldown state of the MFP pin at run mode is by default
+ * determined by the selected alternate function. In case that some buggy
+ * devices need to override this default behavior, the definitions below
+ * indicates the setting of corresponding MFPR bits
+ *
+ * Definition pull_sel pullup_en pulldown_en
+ * MFPR_PULL_NONE 0 0 0
+ * MFPR_PULL_LOW 1 0 1
+ * MFPR_PULL_HIGH 1 1 0
+ * MFPR_PULL_BOTH 1 1 1
+ * MFPR_PULL_FLOAT 1 0 0
+ */
+#define MFPR_PULL_NONE (0)
+#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
+#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN)
+#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN)
+#define MFPR_PULL_FLOAT (MFPR_PULL_SEL)
+
+/* mfp_spin_lock is used to ensure that MFP register configuration
+ * (most likely a read-modify-write operation) is atomic, and that
+ * mfp_table[] is consistent
+ */
+static DEFINE_SPINLOCK(mfp_spin_lock);
+
+static void __iomem *mfpr_mmio_base;
+
+struct mfp_pin {
+ unsigned long config; /* -1 for not configured */
+ unsigned long mfpr_off; /* MFPRxx Register offset */
+ unsigned long mfpr_run; /* Run-Mode Register Value */
+ unsigned long mfpr_lpm; /* Low Power Mode Register Value */
+};
+
+static struct mfp_pin mfp_table[MFP_PIN_MAX];
+
+/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
+static const unsigned long mfpr_lpm[] = {
+ MFPR_LPM_INPUT,
+ MFPR_LPM_DRIVE_LOW,
+ MFPR_LPM_DRIVE_HIGH,
+ MFPR_LPM_PULL_LOW,
+ MFPR_LPM_PULL_HIGH,
+ MFPR_LPM_FLOAT,
+ MFPR_LPM_INPUT,
+};
+
+/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
+static const unsigned long mfpr_pull[] = {
+ MFPR_PULL_NONE,
+ MFPR_PULL_LOW,
+ MFPR_PULL_HIGH,
+ MFPR_PULL_BOTH,
+ MFPR_PULL_FLOAT,
+};
+
+/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
+static const unsigned long mfpr_edge[] = {
+ MFPR_EDGE_NONE,
+ MFPR_EDGE_RISE,
+ MFPR_EDGE_FALL,
+ MFPR_EDGE_BOTH,
+};
+
+#define mfpr_readl(off) \
+ __raw_readl(mfpr_mmio_base + (off))
+
+#define mfpr_writel(off, val) \
+ __raw_writel(val, mfpr_mmio_base + (off))
+
+#define mfp_configured(p) ((p)->config != -1)
+
+/*
+ * perform a read-back of any valid MFPR register to make sure the
+ * previous writings are finished
+ */
+static unsigned long mfpr_off_readback;
+#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + mfpr_off_readback)
+
+static inline void __mfp_config_run(struct mfp_pin *p)
+{
+ if (mfp_configured(p))
+ mfpr_writel(p->mfpr_off, p->mfpr_run);
+}
+
+static inline void __mfp_config_lpm(struct mfp_pin *p)
+{
+ if (mfp_configured(p)) {
+ unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
+ if (mfpr_clr != p->mfpr_run)
+ mfpr_writel(p->mfpr_off, mfpr_clr);
+ if (p->mfpr_lpm != mfpr_clr)
+ mfpr_writel(p->mfpr_off, p->mfpr_lpm);
+ }
+}
+
+void mfp_config(unsigned long *mfp_cfgs, int num)
+{
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ for (i = 0; i < num; i++, mfp_cfgs++) {
+ unsigned long tmp, c = *mfp_cfgs;
+ struct mfp_pin *p;
+ int pin, af, drv, lpm, edge, pull;
+
+ pin = MFP_PIN(c);
+ BUG_ON(pin >= MFP_PIN_MAX);
+ p = &mfp_table[pin];
+
+ af = MFP_AF(c);
+ drv = MFP_DS(c);
+ lpm = MFP_LPM_STATE(c);
+ edge = MFP_LPM_EDGE(c);
+ pull = MFP_PULL(c);
+
+ /* run-mode pull settings will conflict with MFPR bits of
+ * low power mode state, calculate mfpr_run and mfpr_lpm
+ * individually if pull != MFP_PULL_NONE
+ */
+ tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
+
+ if (likely(pull == MFP_PULL_NONE)) {
+ p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+ p->mfpr_lpm = p->mfpr_run;
+ } else {
+ p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+ p->mfpr_run = tmp | mfpr_pull[pull];
+ }
+
+ p->config = c; __mfp_config_run(p);
+ }
+
+ mfpr_sync();
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+unsigned long mfp_read(int mfp)
+{
+ unsigned long val, flags;
+
+ BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+ val = mfpr_readl(mfp_table[mfp].mfpr_off);
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+
+ return val;
+}
+
+void mfp_write(int mfp, unsigned long val)
+{
+ unsigned long flags;
+
+ BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+ mfpr_writel(mfp_table[mfp].mfpr_off, val);
+ mfpr_sync();
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void __init mfp_init_base(void __iomem *mfpr_base)
+{
+ int i;
+
+ /* initialize the table with default - unconfigured */
+ for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
+ mfp_table[i].config = -1;
+
+ mfpr_mmio_base = mfpr_base;
+}
+
+void __init mfp_init_addr(struct mfp_addr_map *map)
+{
+ struct mfp_addr_map *p;
+ unsigned long offset, flags;
+ int i;
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ /* mfp offset for readback */
+ mfpr_off_readback = map[0].offset;
+
+ for (p = map; p->start != MFP_PIN_INVALID; p++) {
+ offset = p->offset;
+ i = p->start;
+
+ do {
+ mfp_table[i].mfpr_off = offset;
+ mfp_table[i].mfpr_run = 0;
+ mfp_table[i].mfpr_lpm = 0;
+ offset += 4; i++;
+ } while ((i <= p->end) && (p->end != -1));
+ }
+
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void mfp_config_lpm(void)
+{
+ struct mfp_pin *p = &mfp_table[0];
+ int pin;
+
+ for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+ __mfp_config_lpm(p);
+}
+
+void mfp_config_run(void)
+{
+ struct mfp_pin *p = &mfp_table[0];
+ int pin;
+
+ for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+ __mfp_config_run(p);
+}
diff --git a/drivers/soc/pxa/ssp.c b/drivers/soc/pxa/ssp.c
new file mode 100644
index 000000000000..563440315acd
--- /dev/null
+++ b/drivers/soc/pxa/ssp.c
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/mach-pxa/ssp.c
+ *
+ * based on linux/arch/arm/mach-sa1100/ssp.c by Russell King
+ *
+ * Copyright (C) 2003 Russell King.
+ * Copyright (C) 2003 Wolfson Microelectronics PLC
+ *
+ * PXA2xx SSP driver. This provides the generic core for simple
+ * IO-based SSP applications and allows easy port setup for DMA access.
+ *
+ * Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include <asm/irq.h>
+
+static DEFINE_MUTEX(ssp_lock);
+static LIST_HEAD(ssp_list);
+
+struct ssp_device *pxa_ssp_request(int port, const char *label)
+{
+ struct ssp_device *ssp = NULL;
+
+ mutex_lock(&ssp_lock);
+
+ list_for_each_entry(ssp, &ssp_list, node) {
+ if (ssp->port_id == port && ssp->use_count == 0) {
+ ssp->use_count++;
+ ssp->label = label;
+ break;
+ }
+ }
+
+ mutex_unlock(&ssp_lock);
+
+ if (&ssp->node == &ssp_list)
+ return NULL;
+
+ return ssp;
+}
+EXPORT_SYMBOL(pxa_ssp_request);
+
+struct ssp_device *pxa_ssp_request_of(const struct device_node *of_node,
+ const char *label)
+{
+ struct ssp_device *ssp = NULL;
+
+ mutex_lock(&ssp_lock);
+
+ list_for_each_entry(ssp, &ssp_list, node) {
+ if (ssp->of_node == of_node && ssp->use_count == 0) {
+ ssp->use_count++;
+ ssp->label = label;
+ break;
+ }
+ }
+
+ mutex_unlock(&ssp_lock);
+
+ if (&ssp->node == &ssp_list)
+ return NULL;
+
+ return ssp;
+}
+EXPORT_SYMBOL(pxa_ssp_request_of);
+
+void pxa_ssp_free(struct ssp_device *ssp)
+{
+ mutex_lock(&ssp_lock);
+ if (ssp->use_count) {
+ ssp->use_count--;
+ ssp->label = NULL;
+ } else
+ dev_err(ssp->dev, "device already free\n");
+ mutex_unlock(&ssp_lock);
+}
+EXPORT_SYMBOL(pxa_ssp_free);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pxa_ssp_of_ids[] = {
+ { .compatible = "mrvl,pxa25x-ssp", .data = (void *) PXA25x_SSP },
+ { .compatible = "mvrl,pxa25x-nssp", .data = (void *) PXA25x_NSSP },
+ { .compatible = "mrvl,pxa27x-ssp", .data = (void *) PXA27x_SSP },
+ { .compatible = "mrvl,pxa3xx-ssp", .data = (void *) PXA3xx_SSP },
+ { .compatible = "mvrl,pxa168-ssp", .data = (void *) PXA168_SSP },
+ { .compatible = "mrvl,pxa910-ssp", .data = (void *) PXA910_SSP },
+ { .compatible = "mrvl,ce4100-ssp", .data = (void *) CE4100_SSP },
+ { },
+};
+MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids);
+#endif
+
+static int pxa_ssp_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct ssp_device *ssp;
+ struct device *dev = &pdev->dev;
+
+ ssp = devm_kzalloc(dev, sizeof(struct ssp_device), GFP_KERNEL);
+ if (ssp == NULL)
+ return -ENOMEM;
+
+ ssp->dev = dev;
+
+ ssp->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(ssp->clk))
+ return PTR_ERR(ssp->clk);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(dev, "no memory resource defined\n");
+ return -ENODEV;
+ }
+
+ res = devm_request_mem_region(dev, res->start, resource_size(res),
+ pdev->name);
+ if (res == NULL) {
+ dev_err(dev, "failed to request memory resource\n");
+ return -EBUSY;
+ }
+
+ ssp->phys_base = res->start;
+
+ ssp->mmio_base = devm_ioremap(dev, res->start, resource_size(res));
+ if (ssp->mmio_base == NULL) {
+ dev_err(dev, "failed to ioremap() registers\n");
+ return -ENODEV;
+ }
+
+ ssp->irq = platform_get_irq(pdev, 0);
+ if (ssp->irq < 0) {
+ dev_err(dev, "no IRQ resource defined\n");
+ return -ENODEV;
+ }
+
+ if (dev->of_node) {
+ const struct of_device_id *id =
+ of_match_device(of_match_ptr(pxa_ssp_of_ids), dev);
+ ssp->type = (int) id->data;
+ } else {
+ const struct platform_device_id *id =
+ platform_get_device_id(pdev);
+ ssp->type = (int) id->driver_data;
+
+ /* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id
+ * starts from 0, do a translation here
+ */
+ ssp->port_id = pdev->id + 1;
+ }
+
+ ssp->use_count = 0;
+ ssp->of_node = dev->of_node;
+
+ mutex_lock(&ssp_lock);
+ list_add(&ssp->node, &ssp_list);
+ mutex_unlock(&ssp_lock);
+
+ platform_set_drvdata(pdev, ssp);
+
+ return 0;
+}
+
+static int pxa_ssp_remove(struct platform_device *pdev)
+{
+ struct ssp_device *ssp;
+
+ ssp = platform_get_drvdata(pdev);
+ if (ssp == NULL)
+ return -ENODEV;
+
+ mutex_lock(&ssp_lock);
+ list_del(&ssp->node);
+ mutex_unlock(&ssp_lock);
+
+ return 0;
+}
+
+static const struct platform_device_id ssp_id_table[] = {
+ { "pxa25x-ssp", PXA25x_SSP },
+ { "pxa25x-nssp", PXA25x_NSSP },
+ { "pxa27x-ssp", PXA27x_SSP },
+ { "pxa3xx-ssp", PXA3xx_SSP },
+ { "pxa168-ssp", PXA168_SSP },
+ { "pxa910-ssp", PXA910_SSP },
+ { },
+};
+
+static struct platform_driver pxa_ssp_driver = {
+ .probe = pxa_ssp_probe,
+ .remove = pxa_ssp_remove,
+ .driver = {
+ .name = "pxa2xx-ssp",
+ .of_match_table = of_match_ptr(pxa_ssp_of_ids),
+ },
+ .id_table = ssp_id_table,
+};
+
+static int __init pxa_ssp_init(void)
+{
+ return platform_driver_register(&pxa_ssp_driver);
+}
+
+static void __exit pxa_ssp_exit(void)
+{
+ platform_driver_unregister(&pxa_ssp_driver);
+}
+
+arch_initcall(pxa_ssp_init);
+module_exit(pxa_ssp_exit);
+
+MODULE_DESCRIPTION("PXA SSP driver");
+MODULE_AUTHOR("Liam Girdwood");
+MODULE_LICENSE("GPL");