diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-06-02 12:11:25 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-06-02 12:11:25 -0700 |
commit | c399c85d60a4295bd911d366399a97df2865fb86 (patch) | |
tree | 8f45170d686f618210ac6f84fca5d5697f93bdb2 /drivers/pci | |
parent | 17d8e3d90b6989419806c1926b894d7d7483a25b (diff) | |
parent | 833e53a4ffe92e742e99347c68d99dc33986598b (diff) |
Merge tag 'pci-v5.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Revert brcmstb patches that broke booting on Raspberry Pi Compute
Module 4 (Bjorn Helgaas)
- Fix bridge_d3_blacklist[] error that overwrote the existing Gigabyte
X299 entry instead of adding a new one (Bjorn Helgaas)
- Update Lorenzo Pieralisi's email address in MAINTAINERS (Lorenzo
Pieralisi)
* tag 'pci-v5.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Update Lorenzo Pieralisi's email address
PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299
Revert "PCI: brcmstb: Split brcm_pcie_setup() into two funcs"
Revert "PCI: brcmstb: Add mechanism to turn on subdev regulators"
Revert "PCI: brcmstb: Add control of subdevice voltage regulators"
Revert "PCI: brcmstb: Do not turn off WOL regulators on suspend"
Diffstat (limited to 'drivers/pci')
-rw-r--r-- | drivers/pci/controller/pcie-brcmstb.c | 257 | ||||
-rw-r--r-- | drivers/pci/pci.c | 2 |
2 files changed, 32 insertions, 227 deletions
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 375c0c40bbf8..e61058e13818 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -24,7 +24,6 @@ #include <linux/pci.h> #include <linux/pci-ecam.h> #include <linux/printk.h> -#include <linux/regulator/consumer.h> #include <linux/reset.h> #include <linux/sizes.h> #include <linux/slab.h> @@ -196,8 +195,6 @@ static inline void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, static inline void brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val); static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val); static inline void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val); -static int brcm_pcie_linkup(struct brcm_pcie *pcie); -static int brcm_pcie_add_bus(struct pci_bus *bus); enum { RGR1_SW_INIT_1, @@ -286,14 +283,6 @@ static const struct pcie_cfg_data bcm2711_cfg = { .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, }; -struct subdev_regulators { - unsigned int num_supplies; - struct regulator_bulk_data supplies[]; -}; - -static int pci_subdev_regulators_add_bus(struct pci_bus *bus); -static void pci_subdev_regulators_remove_bus(struct pci_bus *bus); - struct brcm_msi { struct device *dev; void __iomem *base; @@ -331,9 +320,6 @@ struct brcm_pcie { u32 hw_rev; void (*perst_set)(struct brcm_pcie *pcie, u32 val); void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val); - bool refusal_mode; - struct subdev_regulators *sr; - bool ep_wakeup_capable; }; static inline bool is_bmips(const struct brcm_pcie *pcie) @@ -450,99 +436,6 @@ static int brcm_pcie_set_ssc(struct brcm_pcie *pcie) return ssc && pll ? 0 : -EIO; } -static void *alloc_subdev_regulators(struct device *dev) -{ - static const char * const supplies[] = { - "vpcie3v3", - "vpcie3v3aux", - "vpcie12v", - }; - const size_t size = sizeof(struct subdev_regulators) - + sizeof(struct regulator_bulk_data) * ARRAY_SIZE(supplies); - struct subdev_regulators *sr; - int i; - - sr = devm_kzalloc(dev, size, GFP_KERNEL); - if (sr) { - sr->num_supplies = ARRAY_SIZE(supplies); - for (i = 0; i < ARRAY_SIZE(supplies); i++) - sr->supplies[i].supply = supplies[i]; - } - - return sr; -} - -static int pci_subdev_regulators_add_bus(struct pci_bus *bus) -{ - struct device *dev = &bus->dev; - struct subdev_regulators *sr; - int ret; - - if (!dev->of_node || !bus->parent || !pci_is_root_bus(bus->parent)) - return 0; - - if (dev->driver_data) - dev_err(dev, "dev.driver_data unexpectedly non-NULL\n"); - - sr = alloc_subdev_regulators(dev); - if (!sr) - return -ENOMEM; - - dev->driver_data = sr; - ret = regulator_bulk_get(dev, sr->num_supplies, sr->supplies); - if (ret) - return ret; - - ret = regulator_bulk_enable(sr->num_supplies, sr->supplies); - if (ret) { - dev_err(dev, "failed to enable regulators for downstream device\n"); - return ret; - } - - return 0; -} - -static int brcm_pcie_add_bus(struct pci_bus *bus) -{ - struct device *dev = &bus->dev; - struct brcm_pcie *pcie = (struct brcm_pcie *) bus->sysdata; - int ret; - - if (!dev->of_node || !bus->parent || !pci_is_root_bus(bus->parent)) - return 0; - - ret = pci_subdev_regulators_add_bus(bus); - if (ret) - return ret; - - /* Grab the regulators for suspend/resume */ - pcie->sr = bus->dev.driver_data; - - /* - * If we have failed linkup there is no point to return an error as - * currently it will cause a WARNING() from pci_alloc_child_bus(). - * We return 0 and turn on the "refusal_mode" so that any further - * accesses to the pci_dev just get 0xffffffff - */ - if (brcm_pcie_linkup(pcie) != 0) - pcie->refusal_mode = true; - - return 0; -} - -static void pci_subdev_regulators_remove_bus(struct pci_bus *bus) -{ - struct device *dev = &bus->dev; - struct subdev_regulators *sr = dev->driver_data; - - if (!sr || !bus->parent || !pci_is_root_bus(bus->parent)) - return; - - if (regulator_bulk_disable(sr->num_supplies, sr->supplies)) - dev_err(dev, "failed to disable regulators for downstream device\n"); - dev->driver_data = NULL; -} - /* Limits operation to a specific generation (1, 2, or 3) */ static void brcm_pcie_set_gen(struct brcm_pcie *pcie, int gen) { @@ -858,18 +751,6 @@ static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn, /* Accesses to the RC go right to the RC registers if slot==0 */ if (pci_is_root_bus(bus)) return PCI_SLOT(devfn) ? NULL : base + where; - if (pcie->refusal_mode) { - /* - * At this point we do not have link. There will be a CPU - * abort -- a quirk with this controller --if Linux tries - * to read any config-space registers besides those - * targeting the host bridge. To prevent this we hijack - * the address to point to a safe access that will return - * 0xffffffff. - */ - writel(0xffffffff, base + PCIE_MISC_RC_BAR2_CONFIG_HI); - return base + PCIE_MISC_RC_BAR2_CONFIG_HI + (where & 0x3); - } /* For devices, write to the config space index register */ idx = PCIE_ECAM_OFFSET(bus->number, devfn, 0); @@ -898,8 +779,6 @@ static struct pci_ops brcm_pcie_ops = { .map_bus = brcm_pcie_map_conf, .read = pci_generic_config_read, .write = pci_generic_config_write, - .add_bus = brcm_pcie_add_bus, - .remove_bus = pci_subdev_regulators_remove_bus, }; static struct pci_ops brcm_pcie_ops32 = { @@ -1047,9 +926,16 @@ static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie, static int brcm_pcie_setup(struct brcm_pcie *pcie) { + struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); u64 rc_bar2_offset, rc_bar2_size; void __iomem *base = pcie->base; - int ret, memc; + struct device *dev = pcie->dev; + struct resource_entry *entry; + bool ssc_good = false; + struct resource *res; + int num_out_wins = 0; + u16 nlw, cls, lnksta; + int i, ret, memc; u32 tmp, burst, aspm_support; /* Reset the bridge */ @@ -1139,40 +1025,6 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) if (pcie->gen) brcm_pcie_set_gen(pcie, pcie->gen); - /* Don't advertise L0s capability if 'aspm-no-l0s' */ - aspm_support = PCIE_LINK_STATE_L1; - if (!of_property_read_bool(pcie->np, "aspm-no-l0s")) - aspm_support |= PCIE_LINK_STATE_L0S; - tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); - u32p_replace_bits(&tmp, aspm_support, - PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK); - writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); - - /* - * For config space accesses on the RC, show the right class for - * a PCIe-PCIe bridge (the default setting is to be EP mode). - */ - tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3); - u32p_replace_bits(&tmp, 0x060400, - PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK); - writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3); - - return 0; -} - -static int brcm_pcie_linkup(struct brcm_pcie *pcie) -{ - struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); - struct device *dev = pcie->dev; - void __iomem *base = pcie->base; - struct resource_entry *entry; - struct resource *res; - int num_out_wins = 0; - u16 nlw, cls, lnksta; - bool ssc_good = false; - u32 tmp; - int ret, i; - /* Unassert the fundamental reset */ pcie->perst_set(pcie, 0); @@ -1223,6 +1075,24 @@ static int brcm_pcie_linkup(struct brcm_pcie *pcie) num_out_wins++; } + /* Don't advertise L0s capability if 'aspm-no-l0s' */ + aspm_support = PCIE_LINK_STATE_L1; + if (!of_property_read_bool(pcie->np, "aspm-no-l0s")) + aspm_support |= PCIE_LINK_STATE_L0S; + tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); + u32p_replace_bits(&tmp, aspm_support, + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK); + writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); + + /* + * For config space accesses on the RC, show the right class for + * a PCIe-PCIe bridge (the default setting is to be EP mode). + */ + tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3); + u32p_replace_bits(&tmp, 0x060400, + PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK); + writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3); + if (pcie->ssc) { ret = brcm_pcie_set_ssc(pcie); if (ret == 0) @@ -1351,21 +1221,9 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie) pcie->bridge_sw_init_set(pcie, 1); } -static int pci_dev_may_wakeup(struct pci_dev *dev, void *data) -{ - bool *ret = data; - - if (device_may_wakeup(&dev->dev)) { - *ret = true; - dev_info(&dev->dev, "disable cancelled for wake-up device\n"); - } - return (int) *ret; -} - static int brcm_pcie_suspend(struct device *dev) { struct brcm_pcie *pcie = dev_get_drvdata(dev); - struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); int ret; brcm_pcie_turn_off(pcie); @@ -1383,25 +1241,6 @@ static int brcm_pcie_suspend(struct device *dev) return ret; } - if (pcie->sr) { - /* - * Now turn off the regulators, but if at least one - * downstream device is enabled as a wake-up source, do not - * turn off regulators. - */ - pcie->ep_wakeup_capable = false; - pci_walk_bus(bridge->bus, pci_dev_may_wakeup, - &pcie->ep_wakeup_capable); - if (!pcie->ep_wakeup_capable) { - ret = regulator_bulk_disable(pcie->sr->num_supplies, - pcie->sr->supplies); - if (ret) { - dev_err(dev, "Could not turn off regulators\n"); - reset_control_reset(pcie->rescal); - return ret; - } - } - } clk_disable_unprepare(pcie->clk); return 0; @@ -1419,28 +1258,9 @@ static int brcm_pcie_resume(struct device *dev) if (ret) return ret; - if (pcie->sr) { - if (pcie->ep_wakeup_capable) { - /* - * We are resuming from a suspend. In the suspend we - * did not disable the power supplies, so there is - * no need to enable them (and falsely increase their - * usage count). - */ - pcie->ep_wakeup_capable = false; - } else { - ret = regulator_bulk_enable(pcie->sr->num_supplies, - pcie->sr->supplies); - if (ret) { - dev_err(dev, "Could not turn on regulators\n"); - goto err_disable_clk; - } - } - } - ret = reset_control_reset(pcie->rescal); if (ret) - goto err_regulator; + goto err_disable_clk; ret = brcm_phy_start(pcie); if (ret) @@ -1461,10 +1281,6 @@ static int brcm_pcie_resume(struct device *dev) if (ret) goto err_reset; - ret = brcm_pcie_linkup(pcie); - if (ret) - goto err_reset; - if (pcie->msi) brcm_msi_set_regs(pcie->msi); @@ -1472,9 +1288,6 @@ static int brcm_pcie_resume(struct device *dev) err_reset: reset_control_rearm(pcie->rescal); -err_regulator: - if (pcie->sr) - regulator_bulk_disable(pcie->sr->num_supplies, pcie->sr->supplies); err_disable_clk: clk_disable_unprepare(pcie->clk); return ret; @@ -1606,17 +1419,7 @@ static int brcm_pcie_probe(struct platform_device *pdev) platform_set_drvdata(pdev, pcie); - ret = pci_host_probe(bridge); - if (!ret && !brcm_pcie_link_up(pcie)) - ret = -ENODEV; - - if (ret) { - brcm_pcie_remove(pdev); - return ret; - } - - return 0; - + return pci_host_probe(bridge); fail: __brcm_pcie_remove(pcie); return ret; @@ -1625,8 +1428,8 @@ fail: MODULE_DEVICE_TABLE(of, brcm_pcie_match); static const struct dev_pm_ops brcm_pcie_pm_ops = { - .suspend_noirq = brcm_pcie_suspend, - .resume_noirq = brcm_pcie_resume, + .suspend = brcm_pcie_suspend, + .resume = brcm_pcie_resume, }; static struct platform_driver brcm_pcie_driver = { diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 876182873468..cfaf40a540a8 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2967,6 +2967,8 @@ static const struct dmi_system_id bridge_d3_blacklist[] = { DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."), DMI_MATCH(DMI_BOARD_NAME, "X299 DESIGNARE EX-CF"), }, + }, + { /* * Downstream device is not accessible after putting a root port * into D3cold and back into D0 on Elo i2. |