Merge tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
     Liu)
   - Add schedule point in pci_read_config() to reduce max latency
     (Jiang Biao)
   - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)

  Resource management:
   - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo
     Pieralisi)

  PCIe native device hotplug:
   - Reduce noisiness on hot removal (Lukas Wunner)

  Power management:
   - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
     that was done on the basis of spec typo (Bjorn Helgaas)
   - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
     ambiguity (Krzysztof Wilczyński)
   - Remove unused pcibios_pm_ops (Vaibhav Gupta)

  IOMMU:
   - Enable Translation Blocking for external devices to harden against
     DMA attacks (Rajat Jain)

  Error handling:
   - Add an ACPI APEI notifier chain for vendor CPER records to enable
     device-specific error handling (Shiju Jose)

  ASPM:
   - Remove struct aspm_register_info to simplify code (Saheed O.
     Bolarinwa)

  Amlogic Meson PCIe controller driver:
   - Build as module by default (Kevin Hilman)

  Ampere Altra PCIe controller driver:
   - Add MCFG quirk to work around non-standard ECAM implementation
     (Tuan Phan)

  Broadcom iProc PCIe controller driver:
   - Set affinity mask on MSI interrupts (Mark Tomlinson)

  Broadcom STB PCIe controller driver:
   - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
   - Add DT bindings for more Brcmstb chips (Jim Quinlan)
   - Add bcm7278 register info (Jim Quinlan)
   - Add bcm7278 PERST# support (Jim Quinlan)
   - Add suspend and resume pm_ops (Jim Quinlan)
   - Add control of rescal reset (Jim Quinlan)
   - Set additional internal memory DMA viewport sizes (Jim Quinlan)
   - Accommodate MSI for older chips (Jim Quinlan)
   - Set bus max burst size by chip type (Jim Quinlan)
   - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)

  Freescale i.MX6 PCIe controller driver:
   - Use dev_err_probe() to reduce redundant messages (Anson Huang)

  Freescale Layerscape PCIe controller driver:
   - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
   - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
   - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
   - Add endpoint test support for lS1088a (Xiaowei Bao)
   - Add MSI-X support for ls1088a (Xiaowei Bao)

  HiSilicon HIP PCIe controller driver:
   - Handle HIP-specific errors via ACPI APEI (Yicong Yang)

  HiSilicon Kirin PCIe controller driver:
   - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)

  Intel VMD host bridge driver:
   - Factor out physical offset, bus offset, IRQ domain, IRQ allocation
     (Jon Derrick)
   - Use generic PCI PM correctly (Jon Derrick)

  Marvell Aardvark PCIe controller driver:
   - Fix compilation on s390 (Pali Rohár)
   - Implement driver 'remove' function and allow to build it as module
     (Pali Rohár)
   - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
   - Convert mvebu a3700 internal SMCC firmware return codes to errno
     (Pali Rohár)
   - Fix initialization with old Marvell's Arm Trusted Firmware (Pali
     Rohár)

  Microsoft Hyper-V host bridge driver:
   - Fix hibernation in case interrupts are not re-created (Dexuan Cui)

  NVIDIA Tegra PCIe controller driver:
   - Stop checking return value of debugfs_create() functions (Greg
     Kroah-Hartman)
   - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)

  Qualcomm PCIe controller driver:
   - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)

  Renesas R-Car PCIe controller driver:
   - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
     (Lad Prabhakar)
   - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
   - Add DT support for r8a7742 (Lad Prabhakar)

  Socionext UniPhier Pro5 controller driver:
   - Add DT descriptions of iATU register (host and endpoint) (Kunihiko
     Hayashi)

  Synopsys DesignWare PCIe controller driver:
   - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
     unavoidable) (Hou Zhiqiang)
   - Fix endpoint Header Type check so multi-function devices work (Hou
     Zhiqiang)
   - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
   - Stop leaking MSI page in suspend/resume (Jisheng Zhang)
   - Add common iATU register support instead of keystone-specific code
     (Kunihiko Hayashi)
   - Major config space access and other cleanups in dwc core and
     drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
     kirin, meson, qcom, tegra) (Rob Herring)
   - Add multiple PFs support for endpoint (Xiaowei Bao)
   - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)

  Miscellaneous:
   - Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
   - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
   - Fix "cast truncates bits from constant value" warnings (Gustavo
     Pimentel)
   - Remove redundant zeroing for sg_init_table() (Julia Lawall)
   - Use scnprintf(), not snprintf(), in sysfs "show" functions
     (Krzysztof Wilczyński)
   - Remove unused assignments (Krzysztof Wilczyński)
   - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
   - Simplify bool comparisons (Krzysztof Wilczyński)
   - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
     Miao)
   - Simplify return expressions (Qinglang Miao)"

* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
  PCI: vmd: Update VMD PM to correctly use generic PCI PM
  PCI: vmd: Create IRQ allocation helper
  PCI: vmd: Create IRQ Domain configuration helper
  PCI: vmd: Create bus offset configuration helper
  PCI: vmd: Create physical offset helper
  PCI: v3-semi: Remove unneeded break
  PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
  PCI/ASPM: Remove struct pcie_link_state.l1ss
  PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
  PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
  PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
  PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
  PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
  PCI/ASPM: Remove struct aspm_register_info.latency_encoding
  PCI/ASPM: Remove struct aspm_register_info.enabled
  PCI/ASPM: Remove struct aspm_register_info.support
  PCI/ASPM: Use 'parent' and 'child' for readability
  PCI/ASPM: Move LTR path check to where it's used
  PCI/ASPM: Move pci_clear_and_set_dword() earlier
  PCI: dwc: Fix MSI page leakage in suspend/resume
  ...

1 files changed, 44 insertions, 34 deletions

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 01f23e30bd8f..f70692ac79c5 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1846,7 +1846,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXHV,	quirk_pci
  */
 static void quirk_intel_pcie_pm(struct pci_dev *dev)
 {
-	pci_pm_d3_delay = 120;
+	pci_pm_d3hot_delay = 120;
 	dev->no_d1d2 = 1;
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25e2, quirk_intel_pcie_pm);
@@ -1873,12 +1873,12 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x260b, quirk_intel_pcie_pm);
 
 static void quirk_d3hot_delay(struct pci_dev *dev, unsigned int delay)
 {
-	if (dev->d3_delay >= delay)
+	if (dev->d3hot_delay >= delay)
 		return;
 
-	dev->d3_delay = delay;
+	dev->d3hot_delay = delay;
 	pci_info(dev, "extending delay after power-on from D3hot to %d msec\n",
-		 dev->d3_delay);
+		 dev->d3hot_delay);
 }
 
 static void quirk_radeon_pm(struct pci_dev *dev)
@@ -3387,36 +3387,36 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
  * PCI devices which are on Intel chips can skip the 10ms delay
  * before entering D3 mode.
  */
-static void quirk_remove_d3_delay(struct pci_dev *dev)
-{
-	dev->d3_delay = 0;
-}
-/* C600 Series devices do not need 10ms d3_delay */
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3_delay);
-/* Lynxpoint-H PCH devices do not need 10ms d3_delay */
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3_delay);
-/* Intel Cherrytrail devices do not need 10ms d3_delay */
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2280, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2298, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x229c, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b0, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b5, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b7, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b8, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22d8, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22dc, quirk_remove_d3_delay);
+static void quirk_remove_d3hot_delay(struct pci_dev *dev)
+{
+	dev->d3hot_delay = 0;
+}
+/* C600 Series devices do not need 10ms d3hot_delay */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3hot_delay);
+/* Lynxpoint-H PCH devices do not need 10ms d3hot_delay */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3hot_delay);
+/* Intel Cherrytrail devices do not need 10ms d3hot_delay */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2280, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2298, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x229c, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b0, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b5, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b7, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b8, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22d8, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22dc, quirk_remove_d3hot_delay);
 
 /*
  * Some devices may pass our check in pci_intx_mask_supported() if
@@ -4892,6 +4892,13 @@ static void pci_quirk_enable_intel_rp_mpc_acs(struct pci_dev *dev)
 	}
 }
 
+/*
+ * Currently this quirk does the equivalent of
+ * PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF
+ *
+ * TODO: This quirk also needs to do equivalent of PCI_ACS_TB,
+ * if dev->external_facing || dev->untrusted
+ */
 static int pci_quirk_enable_intel_pch_acs(struct pci_dev *dev)
 {
 	if (!pci_quirk_intel_pch_acs_match(dev))
@@ -4931,6 +4938,9 @@ static int pci_quirk_enable_intel_spt_pch_acs(struct pci_dev *dev)
 	ctrl |= (cap & PCI_ACS_CR);
 	ctrl |= (cap & PCI_ACS_UF);
 
+	if (dev->external_facing || dev->untrusted)
+		ctrl |= (cap & PCI_ACS_TB);
+
 	pci_write_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, ctrl);
 
 	pci_info(dev, "Intel SPT PCH root port ACS workaround enabled\n");