rtw88: support adaptivity for ETSI/JP DFS region

Add Energy Detected CCA (EDCCA) mechanism to detect energy on the channel.
And EDCCA support adaptivity mode now. From MIC Ordinance Regulating Radio
Equipment article 49.20, ETSI EN-300-328 and EN-301-893, the device should
be able to dynamically pause TX activity when energy detected on the air.
According to ETSI/JP DFS region, driver will set corresponding threshold
and stop TX activity if the detected energy exceeds the threshold. For now,
we support it on 8822b and 8822c first.

By default, EDCCA mechanism is turned on. For ETSI/JP DFS region, it will
turn to adaptivity mode. However, with adaptivity, if environment is too
noisy, TX may often be halted. So, a debugfs for EDCCA is added. It can
show what EDCCA mode is used currently. And EDCCA mechanism can be turned
on/off through the debugfs while debugging.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210830072014.12250-4-pkshih@realtek.com

1 files changed, 29 insertions, 0 deletions

diff --git a/drivers/net/wireless/realtek/rtw88/main.h b/drivers/net/wireless/realtek/rtw88/main.h
index 2e5cebba1f21..723316347876 100644
--- a/drivers/net/wireless/realtek/rtw88/main.h
+++ b/drivers/net/wireless/realtek/rtw88/main.h
@@ -41,6 +41,7 @@
 extern bool rtw_bf_support;
 extern bool rtw_disable_lps_deep_mode;
 extern unsigned int rtw_debug_mask;
+extern bool rtw_edcca_enabled;
 extern const struct ieee80211_ops rtw_ops;
 
 #define RTW_MAX_CHANNEL_NUM_2G 14
@@ -545,6 +546,11 @@ struct rtw_rf_sipi_addr {
 	u32 lssi_read_pi;
 };
 
+struct rtw_hw_reg_offset {
+	struct rtw_hw_reg hw_reg;
+	u8 offset;
+};
+
 struct rtw_backup_info {
 	u8 len;
 	u32 reg;
@@ -815,6 +821,7 @@ enum rtw_regd_state {
 struct rtw_regd {
 	enum rtw_regd_state state;
 	const struct rtw_regulatory *regulatory;
+	enum nl80211_dfs_regions dfs_region;
 };
 
 struct rtw_chip_ops {
@@ -852,6 +859,8 @@ struct rtw_chip_ops {
 			      struct ieee80211_bss_conf *conf);
 	void (*cfg_csi_rate)(struct rtw_dev *rtwdev, u8 rssi, u8 cur_rate,
 			     u8 fixrate_en, u8 *new_rate);
+	void (*adaptivity_init)(struct rtw_dev *rtwdev);
+	void (*adaptivity)(struct rtw_dev *rtwdev);
 	void (*cfo_init)(struct rtw_dev *rtwdev);
 	void (*cfo_track)(struct rtw_dev *rtwdev);
 	void (*config_tx_path)(struct rtw_dev *rtwdev, u8 tx_path,
@@ -1207,6 +1216,10 @@ struct rtw_chip_info {
 	u8 bfer_su_max_num;
 	u8 bfer_mu_max_num;
 
+	struct rtw_hw_reg_offset *edcca_th;
+	s8 l2h_th_ini_cs;
+	s8 l2h_th_ini_ad;
+
 	const char *wow_fw_name;
 	const struct wiphy_wowlan_support *wowlan_stub;
 	const u8 max_sched_scan_ssids;
@@ -1555,6 +1568,20 @@ struct rtw_gapk_info {
 	u8 channel;
 };
 
+#define EDCCA_TH_L2H_IDX 0
+#define EDCCA_TH_H2L_IDX 1
+#define EDCCA_TH_L2H_LB 48
+#define EDCCA_ADC_BACKOFF 12
+#define EDCCA_IGI_BASE 50
+#define EDCCA_IGI_L2H_DIFF 8
+#define EDCCA_L2H_H2L_DIFF 7
+#define EDCCA_L2H_H2L_DIFF_NORMAL 8
+
+enum rtw_edcca_mode {
+	RTW_EDCCA_NORMAL	= 0,
+	RTW_EDCCA_ADAPTIVITY	= 1,
+};
+
 struct rtw_cfo_track {
 	bool is_adjust;
 	u8 crystal_cap;
@@ -1646,6 +1673,8 @@ struct rtw_dm_info {
 	struct rtw_gapk_info gapk;
 	bool is_bt_iqk_timeout;
 
+	s8 l2h_th_ini;
+	enum rtw_edcca_mode edcca_mode;
 	u8 scan_density;
 };