rtw88: flush hardware tx queues

Sometimes mac80211 will ask us to flush the hardware queues.
To flush them, first we need to get the corresponding priority queues
from the RQPN mapping table.

Then we can check the available pages are equal to the originally
reserved pages, which means the hardware has returned all of the pages
it used to transmit.

Note that now we only check for 100 ms for the priority queue, but
sometimes if we have a lot of traffic (ex. 100Mbps up), some of the
packets could be dropped.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 14 insertions, 0 deletions

diff --git a/drivers/net/wireless/realtek/rtw88/mac80211.c b/drivers/net/wireless/realtek/rtw88/mac80211.c
index 9c77c86d3021..cb7436949ff6 100644
--- a/drivers/net/wireless/realtek/rtw88/mac80211.c
+++ b/drivers/net/wireless/realtek/rtw88/mac80211.c
@@ -589,6 +589,19 @@ static void rtw_ops_sta_statistics(struct ieee80211_hw *hw,
 	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
 }
 
+static void rtw_ops_flush(struct ieee80211_hw *hw,
+			  struct ieee80211_vif *vif,
+			  u32 queues, bool drop)
+{
+	struct rtw_dev *rtwdev = hw->priv;
+
+	mutex_lock(&rtwdev->mutex);
+	rtw_leave_lps_deep(rtwdev);
+
+	rtw_mac_flush_queues(rtwdev, queues, drop);
+	mutex_unlock(&rtwdev->mutex);
+}
+
 const struct ieee80211_ops rtw_ops = {
 	.tx			= rtw_ops_tx,
 	.wake_tx_queue		= rtw_ops_wake_tx_queue,
@@ -608,5 +621,6 @@ const struct ieee80211_ops rtw_ops = {
 	.mgd_prepare_tx		= rtw_ops_mgd_prepare_tx,
 	.set_rts_threshold	= rtw_ops_set_rts_threshold,
 	.sta_statistics		= rtw_ops_sta_statistics,
+	.flush			= rtw_ops_flush,
 };
 EXPORT_SYMBOL(rtw_ops);