Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

1 files changed, 395 insertions, 0 deletions

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192du/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192du/sw.c
new file mode 100644
index 000000000000..d069a81ac617
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192du/sw.c
@@ -0,0 +1,395 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2024  Realtek Corporation.*/
+
+#include "../wifi.h"
+#include "../core.h"
+#include "../usb.h"
+#include "../base.h"
+#include "../rtl8192d/reg.h"
+#include "../rtl8192d/def.h"
+#include "../rtl8192d/fw_common.h"
+#include "../rtl8192d/hw_common.h"
+#include "../rtl8192d/phy_common.h"
+#include "../rtl8192d/trx_common.h"
+#include "phy.h"
+#include "dm.h"
+#include "hw.h"
+#include "trx.h"
+#include "led.h"
+
+#include <linux/module.h>
+
+static struct usb_interface *rtl92du_get_other_intf(struct ieee80211_hw *hw)
+{
+	struct usb_interface *intf;
+	struct usb_device *udev;
+	u8 other_interfaceindex;
+
+	/* See SET_IEEE80211_DEV(hw, &intf->dev); in usb.c */
+	intf = container_of_const(wiphy_dev(hw->wiphy), struct usb_interface, dev);
+
+	if (intf->altsetting[0].desc.bInterfaceNumber == 0)
+		other_interfaceindex = 1;
+	else
+		other_interfaceindex = 0;
+
+	udev = interface_to_usbdev(intf);
+
+	return usb_ifnum_to_if(udev, other_interfaceindex);
+}
+
+static int rtl92du_init_shared_data(struct ieee80211_hw *hw)
+{
+	struct usb_interface *other_intf = rtl92du_get_other_intf(hw);
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_priv *other_rtlpriv = NULL;
+	struct ieee80211_hw *other_hw = NULL;
+
+	if (other_intf)
+		other_hw = usb_get_intfdata(other_intf);
+
+	if (other_hw) {
+		/* The other interface was already probed. */
+		other_rtlpriv = rtl_priv(other_hw);
+		rtlpriv->curveindex_2g = other_rtlpriv->curveindex_2g;
+		rtlpriv->curveindex_5g = other_rtlpriv->curveindex_5g;
+		rtlpriv->mutex_for_power_on_off = other_rtlpriv->mutex_for_power_on_off;
+		rtlpriv->mutex_for_hw_init = other_rtlpriv->mutex_for_hw_init;
+
+		if (!rtlpriv->curveindex_2g || !rtlpriv->curveindex_5g ||
+		    !rtlpriv->mutex_for_power_on_off || !rtlpriv->mutex_for_hw_init)
+			return -ENOMEM;
+
+		return 0;
+	}
+
+	/* The other interface doesn't exist or was not probed yet. */
+	rtlpriv->curveindex_2g = kcalloc(TARGET_CHNL_NUM_2G,
+					 sizeof(*rtlpriv->curveindex_2g),
+					 GFP_KERNEL);
+	rtlpriv->curveindex_5g = kcalloc(TARGET_CHNL_NUM_5G,
+					 sizeof(*rtlpriv->curveindex_5g),
+					 GFP_KERNEL);
+	rtlpriv->mutex_for_power_on_off =
+		kzalloc(sizeof(*rtlpriv->mutex_for_power_on_off), GFP_KERNEL);
+	rtlpriv->mutex_for_hw_init =
+		kzalloc(sizeof(*rtlpriv->mutex_for_hw_init), GFP_KERNEL);
+
+	if (!rtlpriv->curveindex_2g || !rtlpriv->curveindex_5g ||
+	    !rtlpriv->mutex_for_power_on_off || !rtlpriv->mutex_for_hw_init) {
+		kfree(rtlpriv->curveindex_2g);
+		kfree(rtlpriv->curveindex_5g);
+		kfree(rtlpriv->mutex_for_power_on_off);
+		kfree(rtlpriv->mutex_for_hw_init);
+		rtlpriv->curveindex_2g = NULL;
+		rtlpriv->curveindex_5g = NULL;
+		rtlpriv->mutex_for_power_on_off = NULL;
+		rtlpriv->mutex_for_hw_init = NULL;
+		return -ENOMEM;
+	}
+
+	mutex_init(rtlpriv->mutex_for_power_on_off);
+	mutex_init(rtlpriv->mutex_for_hw_init);
+
+	return 0;
+}
+
+static void rtl92du_deinit_shared_data(struct ieee80211_hw *hw)
+{
+	struct usb_interface *other_intf = rtl92du_get_other_intf(hw);
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (!other_intf || !usb_get_intfdata(other_intf)) {
+		/* The other interface doesn't exist or was already disconnected. */
+		kfree(rtlpriv->curveindex_2g);
+		kfree(rtlpriv->curveindex_5g);
+		if (rtlpriv->mutex_for_power_on_off)
+			mutex_destroy(rtlpriv->mutex_for_power_on_off);
+		if (rtlpriv->mutex_for_hw_init)
+			mutex_destroy(rtlpriv->mutex_for_hw_init);
+		kfree(rtlpriv->mutex_for_power_on_off);
+		kfree(rtlpriv->mutex_for_hw_init);
+	}
+}
+
+static int rtl92du_init_sw_vars(struct ieee80211_hw *hw)
+{
+	const char *fw_name = "rtlwifi/rtl8192dufw.bin";
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	int err;
+
+	err = rtl92du_init_shared_data(hw);
+	if (err)
+		return err;
+
+	rtlpriv->dm.dm_initialgain_enable = true;
+	rtlpriv->dm.dm_flag = 0;
+	rtlpriv->dm.disable_framebursting = false;
+	rtlpriv->dm.thermalvalue = 0;
+	rtlpriv->dm.useramask = true;
+
+	/* dual mac */
+	if (rtlpriv->rtlhal.current_bandtype == BAND_ON_5G)
+		rtlpriv->phy.current_channel = 36;
+	else
+		rtlpriv->phy.current_channel = 1;
+
+	if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY)
+		rtlpriv->rtlhal.disable_amsdu_8k = true;
+
+	/* for LPS & IPS */
+	rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
+	rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
+	rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
+
+	/* for early mode */
+	rtlpriv->rtlhal.earlymode_enable = false;
+
+	/* for firmware buf */
+	rtlpriv->rtlhal.pfirmware = kmalloc(0x8000, GFP_KERNEL);
+	if (!rtlpriv->rtlhal.pfirmware)
+		return -ENOMEM;
+
+	rtlpriv->max_fw_size = 0x8000;
+	pr_info("Driver for Realtek RTL8192DU WLAN interface\n");
+	pr_info("Loading firmware file %s\n", fw_name);
+
+	/* request fw */
+	err = request_firmware_nowait(THIS_MODULE, 1, fw_name,
+				      rtlpriv->io.dev, GFP_KERNEL, hw,
+				      rtl_fw_cb);
+	if (err) {
+		pr_err("Failed to request firmware!\n");
+		kfree(rtlpriv->rtlhal.pfirmware);
+		rtlpriv->rtlhal.pfirmware = NULL;
+		return err;
+	}
+
+	return 0;
+}
+
+static void rtl92du_deinit_sw_vars(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	kfree(rtlpriv->rtlhal.pfirmware);
+	rtlpriv->rtlhal.pfirmware = NULL;
+
+	rtl92du_deinit_shared_data(hw);
+}
+
+static const struct rtl_hal_ops rtl8192du_hal_ops = {
+	.init_sw_vars = rtl92du_init_sw_vars,
+	.deinit_sw_vars = rtl92du_deinit_sw_vars,
+	.read_chip_version = rtl92du_read_chip_version,
+	.read_eeprom_info = rtl92d_read_eeprom_info,
+	.hw_init = rtl92du_hw_init,
+	.hw_disable = rtl92du_card_disable,
+	.enable_interrupt = rtl92du_enable_interrupt,
+	.disable_interrupt = rtl92du_disable_interrupt,
+	.set_network_type = rtl92du_set_network_type,
+	.set_chk_bssid = rtl92du_set_check_bssid,
+	.set_qos = rtl92d_set_qos,
+	.set_bcn_reg = rtl92du_set_beacon_related_registers,
+	.set_bcn_intv = rtl92du_set_beacon_interval,
+	.update_interrupt_mask = rtl92du_update_interrupt_mask,
+	.get_hw_reg = rtl92du_get_hw_reg,
+	.set_hw_reg = rtl92du_set_hw_reg,
+	.update_rate_tbl = rtl92d_update_hal_rate_tbl,
+	.fill_tx_desc = rtl92du_tx_fill_desc,
+	.query_rx_desc = rtl92d_rx_query_desc,
+	.set_channel_access = rtl92d_update_channel_access_setting,
+	.radio_onoff_checking = rtl92d_gpio_radio_on_off_checking,
+	.set_bw_mode = rtl92du_phy_set_bw_mode,
+	.switch_channel = rtl92du_phy_sw_chnl,
+	.dm_watchdog = rtl92du_dm_watchdog,
+	.scan_operation_backup = rtl_phy_scan_operation_backup,
+	.set_rf_power_state = rtl92du_phy_set_rf_power_state,
+	.led_control = rtl92du_led_control,
+	.set_desc = rtl92d_set_desc,
+	.get_desc = rtl92d_get_desc,
+	.enable_hw_sec = rtl92d_enable_hw_security_config,
+	.set_key = rtl92d_set_key,
+	.get_bbreg = rtl92du_phy_query_bb_reg,
+	.set_bbreg = rtl92du_phy_set_bb_reg,
+	.get_rfreg = rtl92d_phy_query_rf_reg,
+	.set_rfreg = rtl92d_phy_set_rf_reg,
+	.linked_set_reg = rtl92du_linked_set_reg,
+	.fill_h2c_cmd = rtl92d_fill_h2c_cmd,
+	.get_btc_status = rtl_btc_status_false,
+	.phy_iq_calibrate = rtl92du_phy_iq_calibrate,
+	.phy_lc_calibrate = rtl92du_phy_lc_calibrate,
+};
+
+static struct rtl_mod_params rtl92du_mod_params = {
+	.sw_crypto = false,
+	.inactiveps = false,
+	.swctrl_lps = false,
+	.debug_level = 0,
+	.debug_mask = 0,
+};
+
+static const struct rtl_hal_usbint_cfg rtl92du_interface_cfg = {
+	/* rx */
+	.rx_urb_num = 8,
+	.rx_max_size = 15360,
+	.usb_rx_hdl = NULL,
+	.usb_rx_segregate_hdl = NULL,
+	/* tx */
+	.usb_tx_cleanup = rtl92du_tx_cleanup,
+	.usb_tx_post_hdl = rtl92du_tx_post_hdl,
+	.usb_tx_aggregate_hdl = rtl92du_tx_aggregate_hdl,
+	.usb_endpoint_mapping = rtl92du_endpoint_mapping,
+	.usb_mq_to_hwq = rtl92du_mq_to_hwq,
+};
+
+static const struct rtl_hal_cfg rtl92du_hal_cfg = {
+	.name = "rtl8192du",
+	.ops = &rtl8192du_hal_ops,
+	.mod_params = &rtl92du_mod_params,
+	.usb_interface_cfg = &rtl92du_interface_cfg,
+
+	.maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
+	.maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
+	.maps[SYS_CLK] = REG_SYS_CLKR,
+	.maps[MAC_RCR_AM] = RCR_AM,
+	.maps[MAC_RCR_AB] = RCR_AB,
+	.maps[MAC_RCR_ACRC32] = RCR_ACRC32,
+	.maps[MAC_RCR_ACF] = RCR_ACF,
+	.maps[MAC_RCR_AAP] = RCR_AAP,
+
+	.maps[EFUSE_TEST] = REG_EFUSE_TEST,
+	.maps[EFUSE_ACCESS] = REG_EFUSE_ACCESS,
+	.maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
+	.maps[EFUSE_CLK] = 0,	/* just for 92se */
+	.maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
+	.maps[EFUSE_PWC_EV12V] = PWC_EV12V,
+	.maps[EFUSE_FEN_ELDR] = FEN_ELDR,
+	.maps[EFUSE_LOADER_CLK_EN] = 0,
+	.maps[EFUSE_ANA8M] = 0,	/* just for 92se */
+	.maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE,
+	.maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
+	.maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
+
+	.maps[RWCAM] = REG_CAMCMD,
+	.maps[WCAMI] = REG_CAMWRITE,
+	.maps[RCAMO] = REG_CAMREAD,
+	.maps[CAMDBG] = REG_CAMDBG,
+	.maps[SECR] = REG_SECCFG,
+	.maps[SEC_CAM_NONE] = CAM_NONE,
+	.maps[SEC_CAM_WEP40] = CAM_WEP40,
+	.maps[SEC_CAM_TKIP] = CAM_TKIP,
+	.maps[SEC_CAM_AES] = CAM_AES,
+	.maps[SEC_CAM_WEP104] = CAM_WEP104,
+
+	.maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
+	.maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
+	.maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
+	.maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
+	.maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
+	.maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
+	.maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8,
+	.maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
+	.maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
+	.maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
+	.maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
+	.maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
+	.maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
+	.maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
+	.maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,
+	.maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,
+
+	.maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
+	.maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
+	.maps[RTL_IMR_BCNINT] = IMR_BCNINT,
+	.maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
+	.maps[RTL_IMR_RDU] = IMR_RDU,
+	.maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
+	.maps[RTL_IMR_BDOK] = IMR_BDOK,
+	.maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
+	.maps[RTL_IMR_TBDER] = IMR_TBDER,
+	.maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
+	.maps[RTL_IMR_TBDOK] = IMR_TBDOK,
+	.maps[RTL_IMR_BKDOK] = IMR_BKDOK,
+	.maps[RTL_IMR_BEDOK] = IMR_BEDOK,
+	.maps[RTL_IMR_VIDOK] = IMR_VIDOK,
+	.maps[RTL_IMR_VODOK] = IMR_VODOK,
+	.maps[RTL_IMR_ROK] = IMR_ROK,
+	.maps[RTL_IBSS_INT_MASKS] = (IMR_BCNINT | IMR_TBDOK | IMR_TBDER),
+
+	.maps[RTL_RC_CCK_RATE1M] = DESC_RATE1M,
+	.maps[RTL_RC_CCK_RATE2M] = DESC_RATE2M,
+	.maps[RTL_RC_CCK_RATE5_5M] = DESC_RATE5_5M,
+	.maps[RTL_RC_CCK_RATE11M] = DESC_RATE11M,
+	.maps[RTL_RC_OFDM_RATE6M] = DESC_RATE6M,
+	.maps[RTL_RC_OFDM_RATE9M] = DESC_RATE9M,
+	.maps[RTL_RC_OFDM_RATE12M] = DESC_RATE12M,
+	.maps[RTL_RC_OFDM_RATE18M] = DESC_RATE18M,
+	.maps[RTL_RC_OFDM_RATE24M] = DESC_RATE24M,
+	.maps[RTL_RC_OFDM_RATE36M] = DESC_RATE36M,
+	.maps[RTL_RC_OFDM_RATE48M] = DESC_RATE48M,
+	.maps[RTL_RC_OFDM_RATE54M] = DESC_RATE54M,
+
+	.maps[RTL_RC_HT_RATEMCS7] = DESC_RATEMCS7,
+	.maps[RTL_RC_HT_RATEMCS15] = DESC_RATEMCS15,
+};
+
+module_param_named(swenc, rtl92du_mod_params.sw_crypto, bool, 0444);
+module_param_named(debug_level, rtl92du_mod_params.debug_level, int, 0644);
+module_param_named(ips, rtl92du_mod_params.inactiveps, bool, 0444);
+module_param_named(swlps, rtl92du_mod_params.swctrl_lps, bool, 0444);
+module_param_named(debug_mask, rtl92du_mod_params.debug_mask, ullong, 0644);
+MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
+MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 0)\n");
+MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
+MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
+
+#define USB_VENDOR_ID_REALTEK		0x0bda
+
+static const struct usb_device_id rtl8192d_usb_ids[] = {
+	{RTL_USB_DEVICE(USB_VENDOR_ID_REALTEK, 0x8193, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(USB_VENDOR_ID_REALTEK, 0x8194, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(USB_VENDOR_ID_REALTEK, 0x8111, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(USB_VENDOR_ID_REALTEK, 0x0193, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(USB_VENDOR_ID_REALTEK, 0x8171, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(USB_VENDOR_ID_REALTEK, 0xe194, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(0x2019, 0xab2c, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(0x2019, 0xab2d, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(0x2019, 0x4903, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(0x2019, 0x4904, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(0x07b8, 0x8193, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(0x20f4, 0x664b, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(0x04dd, 0x954f, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(0x04dd, 0x96a6, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(0x050d, 0x110a, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(0x050d, 0x1105, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(0x050d, 0x120a, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(0x1668, 0x8102, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(0x0930, 0x0a0a, rtl92du_hal_cfg)},
+	{RTL_USB_DEVICE(0x2001, 0x330c, rtl92du_hal_cfg)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, rtl8192d_usb_ids);
+
+static int rtl8192du_probe(struct usb_interface *intf,
+			   const struct usb_device_id *id)
+{
+	return rtl_usb_probe(intf, id, &rtl92du_hal_cfg);
+}
+
+static struct usb_driver rtl8192du_driver = {
+	.name = "rtl8192du",
+	.probe = rtl8192du_probe,
+	.disconnect = rtl_usb_disconnect,
+	.id_table = rtl8192d_usb_ids,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(rtl8192du_driver);
+
+MODULE_AUTHOR("Bitterblue Smith	<rtl8821cerfe2@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Realtek 8192DU 802.11n Dual Mac USB wireless");
+MODULE_FIRMWARE("rtlwifi/rtl8192dufw.bin");