Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

10 files changed, 223 insertions, 121 deletions

diff --git a/drivers/net/wireless/microchip/wilc1000/cfg80211.c b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
index 089102ed9ae5..eb37b228d54e 100644
--- a/drivers/net/wireless/microchip/wilc1000/cfg80211.c
+++ b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
@@ -1617,23 +1617,6 @@ static int del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev)
 	return 0;
 }
 
-static int wilc_suspend(struct wiphy *wiphy, struct cfg80211_wowlan *wow)
-{
-	struct wilc *wl = wiphy_priv(wiphy);
-
-	if (!wow && wilc_wlan_get_num_conn_ifcs(wl))
-		wl->suspend_event = true;
-	else
-		wl->suspend_event = false;
-
-	return 0;
-}
-
-static int wilc_resume(struct wiphy *wiphy)
-{
-	return 0;
-}
-
 static void wilc_set_wakeup(struct wiphy *wiphy, bool enabled)
 {
 	struct wilc *wl = wiphy_priv(wiphy);
@@ -1739,8 +1722,6 @@ static const struct cfg80211_ops wilc_cfg80211_ops = {
 	.set_power_mgmt = set_power_mgmt,
 	.set_cqm_rssi_config = set_cqm_rssi_config,
 
-	.suspend = wilc_suspend,
-	.resume = wilc_resume,
 	.set_wakeup = wilc_set_wakeup,
 	.set_tx_power = set_tx_power,
 	.get_tx_power = get_tx_power,
@@ -1780,7 +1761,6 @@ int wilc_cfg80211_init(struct wilc **wilc, struct device *dev, int io_type,
 		       const struct wilc_hif_func *ops)
 {
 	struct wilc *wl;
-	struct wilc_vif *vif;
 	int ret, i;
 
 	wl = wilc_create_wiphy(dev);
@@ -1809,18 +1789,9 @@ int wilc_cfg80211_init(struct wilc **wilc, struct device *dev, int io_type,
 		ret = -ENOMEM;
 		goto free_cfg;
 	}
-	vif = wilc_netdev_ifc_init(wl, "wlan%d", WILC_STATION_MODE,
-				   NL80211_IFTYPE_STATION, false);
-	if (IS_ERR(vif)) {
-		ret = PTR_ERR(vif);
-		goto free_hq;
-	}
 
 	return 0;
 
-free_hq:
-	destroy_workqueue(wl->hif_workqueue);
-
 free_cfg:
 	wilc_wlan_cfg_deinit(wl);
 
diff --git a/drivers/net/wireless/microchip/wilc1000/fw.h b/drivers/net/wireless/microchip/wilc1000/fw.h
index 5c5cac4aab02..7a930e89614c 100644
--- a/drivers/net/wireless/microchip/wilc1000/fw.h
+++ b/drivers/net/wireless/microchip/wilc1000/fw.h
@@ -13,6 +13,12 @@
 #define WILC_MAX_RATES_SUPPORTED		12
 #define WILC_MAX_NUM_PMKIDS			16
 #define WILC_MAX_NUM_SCANNED_CH			14
+#define WILC_NVMEM_MAX_NUM_BANK			6
+#define WILC_NVMEM_BANK_BASE			0x30000000
+#define WILC_NVMEM_LOW_BANK_OFFSET		0x102c
+#define WILC_NVMEM_HIGH_BANK_OFFSET		0x1380
+#define WILC_NVMEM_IS_BANK_USED			BIT(31)
+#define WILC_NVMEM_IS_BANK_INVALID		BIT(30)
 
 struct wilc_assoc_resp {
 	__le16 capab_info;
@@ -127,4 +133,11 @@ struct wilc_external_auth_param {
 	__le32 key_mgmt_suites;
 	__le16 status;
 } __packed;
+
+static inline u32 get_bank_offset_from_bank_index(unsigned int i)
+{
+	return (((i) < 2) ? WILC_NVMEM_LOW_BANK_OFFSET + ((i) * 32) :
+		WILC_NVMEM_HIGH_BANK_OFFSET + ((i) - 2) * 16);
+}
+
 #endif
diff --git a/drivers/net/wireless/microchip/wilc1000/hif.c b/drivers/net/wireless/microchip/wilc1000/hif.c
index 7719e4f3e2a2..3c48e1a57b24 100644
--- a/drivers/net/wireless/microchip/wilc1000/hif.c
+++ b/drivers/net/wireless/microchip/wilc1000/hif.c
@@ -1294,7 +1294,7 @@ int wilc_get_mac_address(struct wilc_vif *vif, u8 *mac_addr)
 	return result;
 }
 
-int wilc_set_mac_address(struct wilc_vif *vif, u8 *mac_addr)
+int wilc_set_mac_address(struct wilc_vif *vif, const u8 *mac_addr)
 {
 	struct wid wid;
 	int result;
@@ -1302,7 +1302,7 @@ int wilc_set_mac_address(struct wilc_vif *vif, u8 *mac_addr)
 	wid.id = WID_MAC_ADDR;
 	wid.type = WID_STR;
 	wid.size = ETH_ALEN;
-	wid.val = mac_addr;
+	wid.val = (u8 *)mac_addr;
 
 	result = wilc_send_config_pkt(vif, WILC_SET_CFG, &wid, 1);
 	if (result)
diff --git a/drivers/net/wireless/microchip/wilc1000/hif.h b/drivers/net/wireless/microchip/wilc1000/hif.h
index 0d380586b1d9..96eeaf31d237 100644
--- a/drivers/net/wireless/microchip/wilc1000/hif.h
+++ b/drivers/net/wireless/microchip/wilc1000/hif.h
@@ -167,7 +167,7 @@ int wilc_add_rx_gtk(struct wilc_vif *vif, const u8 *rx_gtk, u8 gtk_key_len,
 		    u8 cipher_mode);
 int wilc_set_pmkid_info(struct wilc_vif *vif, struct wilc_pmkid_attr *pmkid);
 int wilc_get_mac_address(struct wilc_vif *vif, u8 *mac_addr);
-int wilc_set_mac_address(struct wilc_vif *vif, u8 *mac_addr);
+int wilc_set_mac_address(struct wilc_vif *vif, const u8 *mac_addr);
 int wilc_set_join_req(struct wilc_vif *vif, u8 *bssid, const u8 *ies,
 		      size_t ies_len);
 int wilc_disconnect(struct wilc_vif *vif);
diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c
index 710e29bea560..9ecf3fb29b55 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.c
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.c
@@ -590,7 +590,6 @@ static int wilc_mac_open(struct net_device *ndev)
 	struct wilc *wl = vif->wilc;
 	int ret = 0;
 	struct mgmt_frame_regs mgmt_regs = {};
-	u8 addr[ETH_ALEN] __aligned(2);
 
 	if (!wl || !wl->dev) {
 		netdev_err(ndev, "device not ready\n");
@@ -609,25 +608,19 @@ static int wilc_mac_open(struct net_device *ndev)
 		return ret;
 	}
 
-	wilc_set_operation_mode(vif, wilc_get_vif_idx(vif), vif->iftype,
-				vif->idx);
-
-	if (is_valid_ether_addr(ndev->dev_addr)) {
-		ether_addr_copy(addr, ndev->dev_addr);
-		wilc_set_mac_address(vif, addr);
-	} else {
-		wilc_get_mac_address(vif, addr);
-		eth_hw_addr_set(ndev, addr);
-	}
 	netdev_dbg(ndev, "Mac address: %pM\n", ndev->dev_addr);
-
-	if (!is_valid_ether_addr(ndev->dev_addr)) {
-		netdev_err(ndev, "Wrong MAC address\n");
+	ret = wilc_set_mac_address(vif, ndev->dev_addr);
+	if (ret) {
+		netdev_err(ndev, "Failed to enforce MAC address in chip");
 		wilc_deinit_host_int(ndev);
-		wilc_wlan_deinitialize(ndev);
-		return -EINVAL;
+		if (!wl->open_ifcs)
+			wilc_wlan_deinitialize(ndev);
+		return ret;
 	}
 
+	wilc_set_operation_mode(vif, wilc_get_vif_idx(vif), vif->iftype,
+				vif->idx);
+
 	mgmt_regs.interface_stypes = vif->mgmt_reg_stypes;
 	/* so we detect a change */
 	vif->mgmt_reg_stypes = 0;
@@ -681,7 +674,7 @@ static int wilc_set_mac_addr(struct net_device *dev, void *p)
 	}
 	srcu_read_unlock(&wilc->srcu, srcu_idx);
 
-	result = wilc_set_mac_address(vif, (u8 *)addr->sa_data);
+	result = wilc_set_mac_address(vif, addr->sa_data);
 	if (result)
 		return result;
 
@@ -948,6 +941,7 @@ struct wilc_vif *wilc_netdev_ifc_init(struct wilc *wl, const char *name,
 				      int vif_type, enum nl80211_iftype type,
 				      bool rtnl_locked)
 {
+	u8 mac_address[ETH_ALEN];
 	struct net_device *ndev;
 	struct wilc_vif *vif;
 	int ret;
@@ -972,36 +966,50 @@ struct wilc_vif *wilc_netdev_ifc_init(struct wilc *wl, const char *name,
 	vif->priv.wdev.iftype = type;
 	vif->priv.dev = ndev;
 
-	if (rtnl_locked)
-		ret = cfg80211_register_netdevice(ndev);
-	else
-		ret = register_netdev(ndev);
-
-	if (ret) {
-		ret = -EFAULT;
-		goto error;
-	}
-
 	ndev->needs_free_netdev = true;
 	vif->iftype = vif_type;
 	vif->idx = wilc_get_available_idx(wl);
 	vif->mac_opened = 0;
+
+	memcpy(mac_address, wl->nv_mac_address, ETH_ALEN);
+	/* WILC firmware uses locally administered MAC address for the
+	 * second virtual interface (bit 1 of first byte set), but
+	 * since it is possibly not loaded/running yet, reproduce this behavior
+	 * in the driver during interface creation.
+	 */
+	if (vif->idx)
+		mac_address[0] |= 0x2;
+
+	eth_hw_addr_set(vif->ndev, mac_address);
+
 	mutex_lock(&wl->vif_mutex);
 	list_add_tail_rcu(&vif->list, &wl->vif_list);
 	wl->vif_num += 1;
 	mutex_unlock(&wl->vif_mutex);
 	synchronize_srcu(&wl->srcu);
 
-	return vif;
-
-error:
 	if (rtnl_locked)
-		cfg80211_unregister_netdevice(ndev);
+		ret = cfg80211_register_netdevice(ndev);
 	else
-		unregister_netdev(ndev);
+		ret = register_netdev(ndev);
+
+	if (ret) {
+		ret = -EFAULT;
+		goto error_remove_vif;
+	}
+
+	return vif;
+
+error_remove_vif:
+	mutex_lock(&wl->vif_mutex);
+	list_del_rcu(&vif->list);
+	wl->vif_num -= 1;
+	mutex_unlock(&wl->vif_mutex);
+	synchronize_srcu(&wl->srcu);
 	free_netdev(ndev);
 	return ERR_PTR(ret);
 }
+EXPORT_SYMBOL_GPL(wilc_netdev_ifc_init);
 
 MODULE_DESCRIPTION("Atmel WILC1000 core wireless driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.h b/drivers/net/wireless/microchip/wilc1000/netdev.h
index fde8610a9c84..95bc8b8fe65a 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.h
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.h
@@ -14,6 +14,7 @@
 #include <linux/if_arp.h>
 #include <linux/gpio/consumer.h>
 #include <linux/rculist.h>
+#include <uapi/linux/if_ether.h>
 
 #include "hif.h"
 #include "wlan.h"
@@ -271,7 +272,6 @@ struct wilc {
 	const struct firmware *firmware;
 
 	struct device *dev;
-	bool suspend_event;
 
 	struct workqueue_struct *hif_workqueue;
 	struct wilc_cfg cfg;
@@ -286,6 +286,7 @@ struct wilc {
 	struct ieee80211_rate bitrates[ARRAY_SIZE(wilc_bitrates)];
 	struct ieee80211_supported_band band;
 	u32 cipher_suites[ARRAY_SIZE(wilc_cipher_suites)];
+	u8 nv_mac_address[ETH_ALEN];
 };
 
 struct wilc_wfi_mon_priv {
diff --git a/drivers/net/wireless/microchip/wilc1000/sdio.c b/drivers/net/wireless/microchip/wilc1000/sdio.c
index 52a770c5e76f..0043f7a0fdf9 100644
--- a/drivers/net/wireless/microchip/wilc1000/sdio.c
+++ b/drivers/net/wireless/microchip/wilc1000/sdio.c
@@ -24,6 +24,9 @@ MODULE_DEVICE_TABLE(sdio, wilc_sdio_ids);
 
 #define WILC_SDIO_BLOCK_SIZE 512
 
+static int wilc_sdio_init(struct wilc *wilc, bool resume);
+static int wilc_sdio_deinit(struct wilc *wilc);
+
 struct wilc_sdio {
 	bool irq_gpio;
 	u32 block_size;
@@ -136,9 +139,11 @@ out:
 static int wilc_sdio_probe(struct sdio_func *func,
 			   const struct sdio_device_id *id)
 {
+	struct wilc_sdio *sdio_priv;
+	struct wilc_vif *vif;
 	struct wilc *wilc;
 	int ret;
-	struct wilc_sdio *sdio_priv;
+
 
 	sdio_priv = kzalloc(sizeof(*sdio_priv), GFP_KERNEL);
 	if (!sdio_priv)
@@ -176,9 +181,28 @@ static int wilc_sdio_probe(struct sdio_func *func,
 	}
 	clk_prepare_enable(wilc->rtc_clk);
 
+	wilc_sdio_init(wilc, false);
+
+	ret = wilc_load_mac_from_nv(wilc);
+	if (ret) {
+		pr_err("Can not retrieve MAC address from chip\n");
+		goto clk_disable_unprepare;
+	}
+
+	wilc_sdio_deinit(wilc);
+
+	vif = wilc_netdev_ifc_init(wilc, "wlan%d", WILC_STATION_MODE,
+				   NL80211_IFTYPE_STATION, false);
+	if (IS_ERR(vif)) {
+		ret = PTR_ERR(vif);
+		goto clk_disable_unprepare;
+	}
+
 	dev_info(&func->dev, "Driver Initializing success\n");
 	return 0;
 
+clk_disable_unprepare:
+	clk_disable_unprepare(wilc->rtc_clk);
 dispose_irq:
 	irq_dispose_mapping(wilc->dev_irq_num);
 	wilc_netdev_cleanup(wilc);
@@ -225,33 +249,6 @@ static bool wilc_sdio_is_init(struct wilc *wilc)
 	return sdio_priv->isinit;
 }
 
-static int wilc_sdio_suspend(struct device *dev)
-{
-	struct sdio_func *func = dev_to_sdio_func(dev);
-	struct wilc *wilc = sdio_get_drvdata(func);
-	int ret;
-
-	dev_info(dev, "sdio suspend\n");
-	chip_wakeup(wilc);
-
-	if (!IS_ERR(wilc->rtc_clk))
-		clk_disable_unprepare(wilc->rtc_clk);
-
-	if (wilc->suspend_event) {
-		host_sleep_notify(wilc);
-		chip_allow_sleep(wilc);
-	}
-
-	ret = wilc_sdio_reset(wilc);
-	if (ret) {
-		dev_err(&func->dev, "Fail reset sdio\n");
-		return ret;
-	}
-	sdio_claim_host(func);
-
-	return 0;
-}
-
 static int wilc_sdio_enable_interrupt(struct wilc *dev)
 {
 	struct sdio_func *func = container_of(dev->dev, struct sdio_func, dev);
@@ -617,7 +614,52 @@ static int wilc_sdio_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
 
 static int wilc_sdio_deinit(struct wilc *wilc)
 {
+	struct sdio_func *func = dev_to_sdio_func(wilc->dev);
 	struct wilc_sdio *sdio_priv = wilc->bus_data;
+	struct sdio_cmd52 cmd;
+	int ret;
+
+	cmd.read_write = 1;
+	cmd.function = 0;
+	cmd.raw = 1;
+
+	/* Disable all functions interrupts */
+	cmd.address = SDIO_CCCR_IENx;
+	cmd.data = 0;
+	ret = wilc_sdio_cmd52(wilc, &cmd);
+	if (ret) {
+		dev_err(&func->dev, "Failed to disable functions interrupts\n");
+		return ret;
+	}
+
+	/* Disable all functions */
+	cmd.address = SDIO_CCCR_IOEx;
+	cmd.data = 0;
+	ret = wilc_sdio_cmd52(wilc, &cmd);
+	if (ret) {
+		dev_err(&func->dev,
+			"Failed to reset all functions\n");
+		return ret;
+	}
+
+	/* Disable CSA */
+	cmd.read_write = 0;
+	cmd.address = SDIO_FBR_BASE(1);
+	ret = wilc_sdio_cmd52(wilc, &cmd);
+	if (ret) {
+		dev_err(&func->dev,
+			"Failed to read CSA for function 1\n");
+		return ret;
+	}
+	cmd.read_write = 1;
+	cmd.address = SDIO_FBR_BASE(1);
+	cmd.data &= ~SDIO_FBR_ENABLE_CSA;
+	ret = wilc_sdio_cmd52(wilc, &cmd);
+	if (ret) {
+		dev_err(&func->dev,
+			"Failed to disable CSA for function 1\n");
+		return ret;
+	}
 
 	sdio_priv->isinit = false;
 	return 0;
@@ -838,27 +880,12 @@ static int wilc_sdio_sync_ext(struct wilc *wilc, int nint)
 {
 	struct sdio_func *func = dev_to_sdio_func(wilc->dev);
 	struct wilc_sdio *sdio_priv = wilc->bus_data;
-	u32 reg;
 
 	if (nint > MAX_NUM_INT) {
 		dev_err(&func->dev, "Too many interrupts (%d)...\n", nint);
 		return -EINVAL;
 	}
 
-	/**
-	 *      Disable power sequencer
-	 **/
-	if (wilc_sdio_read_reg(wilc, WILC_MISC, &reg)) {
-		dev_err(&func->dev, "Failed read misc reg...\n");
-		return -EINVAL;
-	}
-
-	reg &= ~BIT(8);
-	if (wilc_sdio_write_reg(wilc, WILC_MISC, reg)) {
-		dev_err(&func->dev, "Failed write misc reg...\n");
-		return -EINVAL;
-	}
-
 	if (sdio_priv->irq_gpio) {
 		u32 reg;
 		int ret, i;
@@ -942,20 +969,40 @@ static const struct wilc_hif_func wilc_hif_sdio = {
 	.hif_is_init = wilc_sdio_is_init,
 };
 
+static int wilc_sdio_suspend(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct wilc *wilc = sdio_get_drvdata(func);
+	int ret;
+
+	dev_info(dev, "sdio suspend\n");
+
+	if (!IS_ERR(wilc->rtc_clk))
+		clk_disable_unprepare(wilc->rtc_clk);
+
+	host_sleep_notify(wilc);
+
+	wilc_sdio_disable_interrupt(wilc);
+
+	ret = wilc_sdio_reset(wilc);
+	if (ret) {
+		dev_err(&func->dev, "Fail reset sdio\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static int wilc_sdio_resume(struct device *dev)
 {
 	struct sdio_func *func = dev_to_sdio_func(dev);
 	struct wilc *wilc = sdio_get_drvdata(func);
 
 	dev_info(dev, "sdio resume\n");
-	sdio_release_host(func);
-	chip_wakeup(wilc);
 	wilc_sdio_init(wilc, true);
+	wilc_sdio_enable_interrupt(wilc);
 
-	if (wilc->suspend_event)
-		host_wakeup_notify(wilc);
-
-	chip_allow_sleep(wilc);
+	host_wakeup_notify(wilc);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/microchip/wilc1000/spi.c b/drivers/net/wireless/microchip/wilc1000/spi.c
index 61c3572ce321..5ff940c53ad9 100644
--- a/drivers/net/wireless/microchip/wilc1000/spi.c
+++ b/drivers/net/wireless/microchip/wilc1000/spi.c
@@ -206,9 +206,10 @@ static void wilc_wlan_power(struct wilc *wilc, bool on)
 
 static int wilc_bus_probe(struct spi_device *spi)
 {
-	int ret;
-	struct wilc *wilc;
 	struct wilc_spi *spi_priv;
+	struct wilc_vif *vif;
+	struct wilc *wilc;
+	int ret;
 
 	spi_priv = kzalloc(sizeof(*spi_priv), GFP_KERNEL);
 	if (!spi_priv)
@@ -249,7 +250,19 @@ static int wilc_bus_probe(struct spi_device *spi)
 	if (ret)
 		goto power_down;
 
+	ret = wilc_load_mac_from_nv(wilc);
+	if (ret) {
+		pr_err("Can not retrieve MAC address from chip\n");
+		goto power_down;
+	}
+
 	wilc_wlan_power(wilc, false);
+	vif = wilc_netdev_ifc_init(wilc, "wlan%d", WILC_STATION_MODE,
+				   NL80211_IFTYPE_STATION, false);
+	if (IS_ERR(vif)) {
+		ret = PTR_ERR(vif);
+		goto power_down;
+	}
 	return 0;
 
 power_down:
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c
index a9e872a7b2c3..533939e71534 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.c
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.c
@@ -678,17 +678,17 @@ EXPORT_SYMBOL_GPL(chip_wakeup);
 
 void host_wakeup_notify(struct wilc *wilc)
 {
-	acquire_bus(wilc, WILC_BUS_ACQUIRE_ONLY);
+	acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
 	wilc->hif_func->hif_write_reg(wilc, WILC_CORTUS_INTERRUPT_2, 1);
-	release_bus(wilc, WILC_BUS_RELEASE_ONLY);
+	release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
 }
 EXPORT_SYMBOL_GPL(host_wakeup_notify);
 
 void host_sleep_notify(struct wilc *wilc)
 {
-	acquire_bus(wilc, WILC_BUS_ACQUIRE_ONLY);
+	acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
 	wilc->hif_func->hif_write_reg(wilc, WILC_CORTUS_INTERRUPT_1, 1);
-	release_bus(wilc, WILC_BUS_RELEASE_ONLY);
+	release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
 }
 EXPORT_SYMBOL_GPL(host_sleep_notify);
 
@@ -1473,6 +1473,55 @@ u32 wilc_get_chipid(struct wilc *wilc, bool update)
 	return wilc->chipid;
 }
 
+int wilc_load_mac_from_nv(struct wilc *wl)
+{
+	int ret = -EINVAL;
+	unsigned int i;
+
+	acquire_bus(wl, WILC_BUS_ACQUIRE_AND_WAKEUP);
+
+	for (i = 0; i < WILC_NVMEM_MAX_NUM_BANK; i++) {
+		int bank_offset = get_bank_offset_from_bank_index(i);
+		u32 reg1, reg2;
+		u8 invalid;
+		u8 used;
+
+		ret = wl->hif_func->hif_read_reg(wl,
+						 WILC_NVMEM_BANK_BASE + bank_offset,
+						 &reg1);
+		if (ret) {
+			pr_err("Can not read address %d lower part", i);
+			break;
+		}
+		ret = wl->hif_func->hif_read_reg(wl,
+						 WILC_NVMEM_BANK_BASE + bank_offset + 4,
+						 &reg2);
+		if (ret) {
+			pr_err("Can not read address %d upper part", i);
+			break;
+		}
+
+		used = FIELD_GET(WILC_NVMEM_IS_BANK_USED, reg1);
+		invalid = FIELD_GET(WILC_NVMEM_IS_BANK_INVALID, reg1);
+		if (!used || invalid)
+			continue;
+
+		wl->nv_mac_address[0] = FIELD_GET(GENMASK(23, 16), reg1);
+		wl->nv_mac_address[1] = FIELD_GET(GENMASK(15, 8), reg1);
+		wl->nv_mac_address[2] = FIELD_GET(GENMASK(7, 0), reg1);
+		wl->nv_mac_address[3] = FIELD_GET(GENMASK(31, 24), reg2);
+		wl->nv_mac_address[4] = FIELD_GET(GENMASK(23, 16), reg2);
+		wl->nv_mac_address[5] = FIELD_GET(GENMASK(15, 8), reg2);
+
+		ret = 0;
+		break;
+	}
+
+	release_bus(wl, WILC_BUS_RELEASE_ALLOW_SLEEP);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wilc_load_mac_from_nv);
+
 int wilc_wlan_init(struct net_device *dev)
 {
 	int ret = 0;
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
index 54643d8fef04..dd2fb3c2f06a 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.h
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.h
@@ -56,7 +56,6 @@
 #define WILC_HOST_RX_CTRL		(WILC_PERIPH_REG_BASE + 0x80)
 #define WILC_HOST_RX_EXTRA_SIZE		(WILC_PERIPH_REG_BASE + 0x84)
 #define WILC_HOST_TX_CTRL_1		(WILC_PERIPH_REG_BASE + 0x88)
-#define WILC_MISC			(WILC_PERIPH_REG_BASE + 0x428)
 #define WILC_INTR_REG_BASE		(WILC_PERIPH_REG_BASE + 0xa00)
 #define WILC_INTR_ENABLE		WILC_INTR_REG_BASE
 #define WILC_INTR2_ENABLE		(WILC_INTR_REG_BASE + 4)
@@ -445,4 +444,5 @@ int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids,
 			 u32 count);
 int wilc_wlan_init(struct net_device *dev);
 u32 wilc_get_chipid(struct wilc *wilc, bool update);
+int wilc_load_mac_from_nv(struct wilc *wilc);
 #endif