diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-07-16 19:28:34 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-07-16 19:28:34 -0700 |
commit | 51835949dda3783d4639cfa74ce13a3c9829de00 (patch) | |
tree | 2b593de5eba6ecc73f7c58fc65fdaffae45c7323 /drivers/net/wireless/intel/iwlwifi/mvm/power.c | |
parent | 0434dbe32053d07d658165be681505120c6b1abc (diff) | |
parent | 77ae5e5b00720372af2860efdc4bc652ac682696 (diff) |
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/mvm/power.c')
-rw-r--r-- | drivers/net/wireless/intel/iwlwifi/mvm/power.c | 129 |
1 files changed, 69 insertions, 60 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/power.c b/drivers/net/wireless/intel/iwlwifi/mvm/power.c index 568f53c56199..bc363e8427e4 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/power.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/power.c @@ -211,19 +211,37 @@ static void iwl_mvm_power_configure_uapsd(struct iwl_mvm *mvm, IWL_MVM_PS_HEAVY_RX_THLD_PERCENT; } -static void iwl_mvm_p2p_standalone_iterator(void *_data, u8 *mac, - struct ieee80211_vif *vif) +struct iwl_allow_uapsd_iface_iterator_data { + struct ieee80211_vif *current_vif; + bool allow_uapsd; +}; + +static void iwl_mvm_allow_uapsd_iterator(void *_data, u8 *mac, + struct ieee80211_vif *vif) { - bool *is_p2p_standalone = _data; + struct iwl_allow_uapsd_iface_iterator_data *data = _data; + struct iwl_mvm_vif *other_mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct iwl_mvm_vif *curr_mvmvif = + iwl_mvm_vif_from_mac80211(data->current_vif); - switch (ieee80211_vif_type_p2p(vif)) { - case NL80211_IFTYPE_P2P_GO: + /* exclude the given vif */ + if (vif == data->current_vif) + return; + + switch (vif->type) { case NL80211_IFTYPE_AP: - *is_p2p_standalone = false; + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_NAN: + data->allow_uapsd = false; break; case NL80211_IFTYPE_STATION: - if (vif->cfg.assoc) - *is_p2p_standalone = false; + /* allow UAPSD if P2P interface and BSS station interface share + * the same channel. + */ + if (vif->cfg.assoc && other_mvmvif->deflink.phy_ctxt && + curr_mvmvif->deflink.phy_ctxt && + other_mvmvif->deflink.phy_ctxt->id != curr_mvmvif->deflink.phy_ctxt->id) + data->allow_uapsd = false; break; default: @@ -235,6 +253,10 @@ static bool iwl_mvm_power_allow_uapsd(struct iwl_mvm *mvm, struct ieee80211_vif *vif) { struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct iwl_allow_uapsd_iface_iterator_data data = { + .current_vif = vif, + .allow_uapsd = true, + }; if (ether_addr_equal(mvmvif->uapsd_misbehaving_ap_addr, vif->cfg.ap_addr)) @@ -249,88 +271,75 @@ static bool iwl_mvm_power_allow_uapsd(struct iwl_mvm *mvm, IEEE80211_P2P_OPPPS_ENABLE_BIT)) return false; - /* - * Avoid using uAPSD if client is in DCM - - * low latency issue in Miracast - */ - if (iwl_mvm_phy_ctx_count(mvm) >= 2) + if (vif->p2p && !iwl_mvm_is_p2p_scm_uapsd_supported(mvm)) return false; - if (vif->p2p) { - /* Allow U-APSD only if p2p is stand alone */ - bool is_p2p_standalone = true; - - if (!iwl_mvm_is_p2p_scm_uapsd_supported(mvm)) - return false; - - ieee80211_iterate_active_interfaces_atomic(mvm->hw, - IEEE80211_IFACE_ITER_NORMAL, - iwl_mvm_p2p_standalone_iterator, - &is_p2p_standalone); - - if (!is_p2p_standalone) - return false; - } + ieee80211_iterate_active_interfaces_atomic(mvm->hw, + IEEE80211_IFACE_ITER_NORMAL, + iwl_mvm_allow_uapsd_iterator, + &data); - return true; + return data.allow_uapsd; } -static bool iwl_mvm_power_is_radar(struct ieee80211_vif *vif) +static bool iwl_mvm_power_is_radar(struct ieee80211_bss_conf *link_conf) { struct ieee80211_chanctx_conf *chanctx_conf; - struct ieee80211_bss_conf *link_conf; - bool radar_detect = false; - unsigned int link_id; - rcu_read_lock(); - for_each_vif_active_link(vif, link_conf, link_id) { - chanctx_conf = rcu_dereference(link_conf->chanctx_conf); - /* this happens on link switching, just ignore inactive ones */ - if (!chanctx_conf) - continue; + chanctx_conf = rcu_dereference(link_conf->chanctx_conf); - radar_detect = !!(chanctx_conf->def.chan->flags & - IEEE80211_CHAN_RADAR); - if (radar_detect) - goto out; - } + /* this happens on link switching, just ignore inactive ones */ + if (!chanctx_conf) + return false; -out: - rcu_read_unlock(); - return radar_detect; + return chanctx_conf->def.chan->flags & IEEE80211_CHAN_RADAR; } static void iwl_mvm_power_config_skip_dtim(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct iwl_mac_power_cmd *cmd) { - int dtimper = vif->bss_conf.dtim_period ?: 1; - int skip; + struct ieee80211_bss_conf *link_conf; + unsigned int min_link_skip = ~0; + unsigned int link_id; /* disable, in case we're supposed to override */ cmd->skip_dtim_periods = 0; cmd->flags &= ~cpu_to_le16(POWER_FLAGS_SKIP_OVER_DTIM_MSK); - if (iwl_mvm_power_is_radar(vif)) + if (!test_bit(IWL_MVM_STATUS_IN_D3, &mvm->status)) { + if (iwlmvm_mod_params.power_scheme != IWL_POWER_SCHEME_LP) + return; + cmd->skip_dtim_periods = 2; + cmd->flags |= cpu_to_le16(POWER_FLAGS_SKIP_OVER_DTIM_MSK); return; + } - if (dtimper >= 10) - return; + rcu_read_lock(); + for_each_vif_active_link(vif, link_conf, link_id) { + unsigned int dtimper = link_conf->dtim_period ?: 1; + unsigned int dtimper_tu = dtimper * link_conf->beacon_int; + unsigned int skip; - if (!test_bit(IWL_MVM_STATUS_IN_D3, &mvm->status)) { - if (iwlmvm_mod_params.power_scheme != IWL_POWER_SCHEME_LP) + if (dtimper >= 10 || iwl_mvm_power_is_radar(link_conf)) { + rcu_read_unlock(); return; - skip = 2; - } else { - int dtimper_tu = dtimper * vif->bss_conf.beacon_int; + } if (WARN_ON(!dtimper_tu)) - return; + continue; + /* configure skip over dtim up to 900 TU DTIM interval */ - skip = max_t(u8, 1, 900 / dtimper_tu); + skip = max_t(int, 1, 900 / dtimper_tu); + min_link_skip = min(min_link_skip, skip); } + rcu_read_unlock(); + + /* no WARN_ON, can only happen with WARN_ON above */ + if (min_link_skip == ~0) + return; - cmd->skip_dtim_periods = skip; + cmd->skip_dtim_periods = min_link_skip; cmd->flags |= cpu_to_le16(POWER_FLAGS_SKIP_OVER_DTIM_MSK); } |