Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

1 files changed, 14 insertions, 39 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
index f4937a100cbe..08c4898c8f1a 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
@@ -28,9 +28,6 @@
 #define MVM_UCODE_ALIVE_TIMEOUT	(2 * HZ)
 #define MVM_UCODE_CALIB_TIMEOUT	(2 * HZ)
 
-#define IWL_UATS_VLP_AP_SUPPORTED BIT(29)
-#define IWL_UATS_AFC_AP_SUPPORTED BIT(30)
-
 struct iwl_mvm_alive_data {
 	bool valid;
 	u32 scd_base_addr;
@@ -408,7 +405,7 @@ static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm,
 						UREG_LMAC2_CURRENT_PC));
 		}
 
-		if (ret == -ETIMEDOUT && !mvm->pldr_sync)
+		if (ret == -ETIMEDOUT && !mvm->fw_product_reset)
 			iwl_fw_dbg_error_collect(&mvm->fwrt,
 						 FW_DBG_TRIGGER_ALIVE_TIMEOUT);
 
@@ -460,12 +457,14 @@ static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm,
 #endif
 
 	/*
+	 * For pre-MLD API (MLD API doesn't use the timestamps):
 	 * All the BSSes in the BSS table include the GP2 in the system
 	 * at the beacon Rx time, this is of course no longer relevant
 	 * since we are resetting the firmware.
 	 * Purge all the BSS table.
 	 */
-	cfg80211_bss_flush(mvm->hw->wiphy);
+	if (!mvm->mld_api_is_used)
+		cfg80211_bss_flush(mvm->hw->wiphy);
 
 	return 0;
 }
@@ -491,17 +490,11 @@ static void iwl_mvm_uats_init(struct iwl_mvm *mvm)
 		.dataflags[0] = IWL_HCMD_DFL_NOCOPY,
 	};
 
-	if (!(mvm->trans->trans_cfg->device_family >=
-	      IWL_DEVICE_FAMILY_AX210)) {
+	if (mvm->trans->trans_cfg->device_family < IWL_DEVICE_FAMILY_AX210) {
 		IWL_DEBUG_RADIO(mvm, "UATS feature is not supported\n");
 		return;
 	}
 
-	if (!mvm->fwrt.uats_enabled) {
-		IWL_DEBUG_RADIO(mvm, "UATS feature is disabled\n");
-		return;
-	}
-
 	cmd_ver = iwl_fw_lookup_cmd_ver(mvm->fw, cmd.id,
 					IWL_FW_CMD_VER_UNKNOWN);
 	if (cmd_ver != 1) {
@@ -513,7 +506,7 @@ static void iwl_mvm_uats_init(struct iwl_mvm *mvm)
 
 	ret = iwl_uefi_get_uats_table(mvm->trans, &mvm->fwrt);
 	if (ret < 0) {
-		IWL_ERR(mvm, "failed to read UATS table (%d)\n", ret);
+		IWL_DEBUG_FW(mvm, "failed to read UATS table (%d)\n", ret);
 		return;
 	}
 
@@ -627,8 +620,8 @@ static int iwl_run_unified_mvm_ucode(struct iwl_mvm *mvm)
 	if (mvm->trans->trans_cfg->device_family == IWL_DEVICE_FAMILY_AX210) {
 		sb_cfg = iwl_read_umac_prph(mvm->trans, SB_MODIFY_CFG_FLAG);
 		/* if needed, we'll reset this on our way out later */
-		mvm->pldr_sync = sb_cfg == SB_CFG_RESIDES_IN_ROM;
-		if (mvm->pldr_sync && iwl_mei_pldr_req())
+		mvm->fw_product_reset = sb_cfg == SB_CFG_RESIDES_IN_ROM;
+		if (mvm->fw_product_reset && iwl_mei_pldr_req())
 			return -EBUSY;
 	}
 
@@ -647,7 +640,7 @@ static int iwl_run_unified_mvm_ucode(struct iwl_mvm *mvm)
 		IWL_ERR(mvm, "Failed to start RT ucode: %d\n", ret);
 
 		/* if we needed reset then fail here, but notify and remove */
-		if (mvm->pldr_sync) {
+		if (mvm->fw_product_reset) {
 			iwl_mei_alive_notif(false);
 			iwl_trans_pcie_remove(mvm->trans, true);
 		}
@@ -686,14 +679,6 @@ static int iwl_run_unified_mvm_ucode(struct iwl_mvm *mvm)
 			goto error;
 	}
 
-	if (IWL_MVM_PARSE_NVM && !mvm->nvm_data) {
-		ret = iwl_nvm_init(mvm);
-		if (ret) {
-			IWL_ERR(mvm, "Failed to read NVM: %d\n", ret);
-			goto error;
-		}
-	}
-
 	ret = iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(REGULATORY_AND_NVM_GROUP,
 						NVM_ACCESS_COMPLETE),
 				   CMD_SEND_IN_RFKILL,
@@ -718,7 +703,7 @@ static int iwl_run_unified_mvm_ucode(struct iwl_mvm *mvm)
 		return ret;
 
 	/* Read the NVM only at driver load time, no need to do this twice */
-	if (!IWL_MVM_PARSE_NVM && !mvm->nvm_data) {
+	if (!mvm->nvm_data) {
 		mvm->nvm_data = iwl_get_nvm(mvm->trans, mvm->fw,
 					    mvm->set_tx_ant, mvm->set_rx_ant);
 		if (IS_ERR(mvm->nvm_data)) {
@@ -843,7 +828,7 @@ remove_notif:
 	iwl_remove_notification(&mvm->notif_wait, &calib_wait);
 out:
 	mvm->rfkill_safe_init_done = false;
-	if (iwlmvm_mod_params.init_dbg && !mvm->nvm_data) {
+	if (!mvm->nvm_data) {
 		/* we want to debug INIT and we have no NVM - fake */
 		mvm->nvm_data = kzalloc(sizeof(struct iwl_nvm_data) +
 					sizeof(struct ieee80211_channel) +
@@ -1231,10 +1216,6 @@ static void iwl_mvm_lari_cfg(struct iwl_mvm *mvm)
 					"Failed to send LARI_CONFIG_CHANGE (%d)\n",
 					ret);
 	}
-
-	if (le32_to_cpu(cmd.oem_uhb_allow_bitmap) & IWL_UATS_VLP_AP_SUPPORTED ||
-	    le32_to_cpu(cmd.oem_uhb_allow_bitmap) & IWL_UATS_AFC_AP_SUPPORTED)
-		mvm->fwrt.uats_enabled = true;
 }
 
 void iwl_mvm_get_bios_tables(struct iwl_mvm *mvm)
@@ -1376,9 +1357,6 @@ static int iwl_mvm_load_rt_fw(struct iwl_mvm *mvm)
 
 	if (ret) {
 		IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", ret);
-
-		if (iwlmvm_mod_params.init_dbg)
-			return 0;
 		return ret;
 	}
 
@@ -1415,14 +1393,14 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
 	ret = iwl_mvm_load_rt_fw(mvm);
 	if (ret) {
 		IWL_ERR(mvm, "Failed to start RT ucode: %d\n", ret);
-		if (ret != -ERFKILL && !mvm->pldr_sync)
+		if (ret != -ERFKILL && !mvm->fw_product_reset)
 			iwl_fw_dbg_error_collect(&mvm->fwrt,
 						 FW_DBG_TRIGGER_DRIVER);
 		goto error;
 	}
 
 	/* FW loaded successfully */
-	mvm->pldr_sync = false;
+	mvm->fw_product_reset = false;
 
 	iwl_fw_disable_dbg_asserts(&mvm->fwrt);
 	iwl_get_shared_mem_conf(&mvm->fwrt);
@@ -1489,8 +1467,6 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
 	for (i = 0; i < IWL_MVM_FW_MAX_LINK_ID + 1; i++)
 		RCU_INIT_POINTER(mvm->link_id_to_link_conf[i], NULL);
 
-	memset(&mvm->fw_link_ids_map, 0, sizeof(mvm->fw_link_ids_map));
-
 	mvm->tdls_cs.peer.sta_id = IWL_MVM_INVALID_STA;
 
 	/* reset quota debouncing buffer - 0xff will yield invalid data */
@@ -1619,8 +1595,7 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
 	IWL_DEBUG_INFO(mvm, "RT uCode started.\n");
 	return 0;
  error:
-	if (!iwlmvm_mod_params.init_dbg || !ret)
-		iwl_mvm_stop_device(mvm);
+	iwl_mvm_stop_device(mvm);
 	return ret;
 }