Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

1 files changed, 158 insertions, 1 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/location.h b/drivers/net/wireless/intel/iwlwifi/fw/api/location.h
index 25530a29317e..30a54c7fa001 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/location.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/location.h
@@ -2,6 +2,7 @@
 /*
  * Copyright (C) 2015-2017 Intel Deutschland GmbH
  * Copyright (C) 2018-2022 Intel Corporation
+ * Copyright (C) 2024 Intel Corporation
  */
 #ifndef __iwl_fw_api_location_h__
 #define __iwl_fw_api_location_h__
@@ -390,10 +391,62 @@ struct iwl_tof_responder_config_cmd_v9 {
 	__le16 max_time_between_msr;
 } __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_8 */
 
+/**
+ * struct iwl_tof_responder_config_cmd - ToF AP mode
+ * @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field
+ * @responder_cfg_flags: &iwl_tof_responder_cfg_flags
+ * @format_bw: bits 0 - 3: &enum iwl_location_frame_format.
+ *             bits 4 - 7: &enum iwl_location_bw.
+ * @bss_color: current AP bss_color
+ * @channel_num: current AP Channel
+ * @ctrl_ch_position: coding of the control channel position relative to
+ *	the center frequency, see iwl_mvm_get_ctrl_pos()
+ * @sta_id: index of the AP STA when in AP mode
+ * @band: current AP band
+ * @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug
+ *	purposes, simulating station movement by adding various values
+ *	to this field
+ * @common_calib: XVT: common calibration value
+ * @specific_calib: XVT: specific calibration value
+ * @bssid: Current AP BSSID
+ * @r2i_ndp_params: parameters for R2I NDP.
+ *	bits 0 - 2: max number of LTF repetitions
+ *	bits 3 - 5: max number of spatial streams (supported values are < 2)
+ *	bits 6 - 7: max number of total LTFs see
+ *	&enum ieee80211_range_params_max_total_ltf
+ * @i2r_ndp_params: parameters for I2R NDP.
+ *	bits 0 - 2: max number of LTF repetitions
+ *	bits 3 - 5: max number of spatial streams
+ *	bits 6 - 7: max number of total LTFs see
+ *	&enum ieee80211_range_params_max_total_ltf
+ * @min_time_between_msr: for non trigger based NDP ranging, minimum time
+ *	between measurements in milliseconds.
+ * @max_time_between_msr: for non trigger based NDP ranging, maximum time
+ *	between measurements in milliseconds.
+ */
+struct iwl_tof_responder_config_cmd {
+	__le32 cmd_valid_fields;
+	__le32 responder_cfg_flags;
+	u8 format_bw;
+	u8 bss_color;
+	u8 channel_num;
+	u8 ctrl_ch_position;
+	u8 sta_id;
+	u8 band;
+	__le16 toa_offset;
+	__le16 common_calib;
+	__le16 specific_calib;
+	u8 bssid[ETH_ALEN];
+	u8 r2i_ndp_params;
+	u8 i2r_ndp_params;
+	__le16 min_time_between_msr;
+	__le16 max_time_between_msr;
+} __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_10 */
+
 #define IWL_LCI_CIVIC_IE_MAX_SIZE	400
 
 /**
- * struct iwl_tof_responder_dyn_config_cmd - Dynamic responder settings
+ * struct iwl_tof_responder_dyn_config_cmd_v2 - Dynamic responder settings
  * @lci_len: The length of the 1st (LCI) part in the @lci_civic buffer
  * @civic_len: The length of the 2nd (CIVIC) part in the @lci_civic buffer
  * @lci_civic: The LCI/CIVIC buffer. LCI data (if exists) comes first, then, if
@@ -561,6 +614,8 @@ struct iwl_tof_range_req_ap_entry_v2 {
  *	the responder asked for LMR feedback although the initiator did not set
  *	the LMR feedback bit in the FTM request. If not set, the initiator will
  *	continue with the session and will provide the LMR feedback.
+ * @IWL_INITIATOR_AP_FLAGS_TEST_INCORRECT_SAC: send an incorrect SAC in the
+ *	first NDP exchange. This is used for testing.
  */
 enum iwl_initiator_ap_flags {
 	IWL_INITIATOR_AP_FLAGS_ASAP = BIT(1),
@@ -577,6 +632,7 @@ enum iwl_initiator_ap_flags {
 	IWL_INITIATOR_AP_FLAGS_USE_CALIB = BIT(13),
 	IWL_INITIATOR_AP_FLAGS_PMF = BIT(14),
 	IWL_INITIATOR_AP_FLAGS_TERMINATE_ON_LMR_FEEDBACK = BIT(15),
+	IWL_INITIATOR_AP_FLAGS_TEST_INCORRECT_SAC = BIT(16),
 };
 
 /**
@@ -797,6 +853,7 @@ struct iwl_tof_range_req_ap_entry_v7 {
 } __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_7 */
 
 #define IWL_LOCATION_MAX_STS_POS	3
+#define IWL_LOCATION_TOTAL_LTF_POS	6
 
 /**
  * struct iwl_tof_range_req_ap_entry_v8 - AP configuration parameters
@@ -954,6 +1011,78 @@ struct iwl_tof_range_req_ap_entry_v9 {
 } __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_9 */
 
 /**
+ * struct iwl_tof_range_req_ap_entry_v10 - AP configuration parameters
+ * @initiator_ap_flags: see &enum iwl_initiator_ap_flags.
+ * @band: 0 for 5.2 GHz, 1 for 2.4 GHz, 2 for 6GHz
+ * @channel_num: AP Channel number
+ * @format_bw: bits 0 - 3: &enum iwl_location_frame_format.
+ *             bits 4 - 7: &enum iwl_location_bw.
+ * @ctrl_ch_position: Coding of the control channel position relative to the
+ *	center frequency, see iwl_mvm_get_ctrl_pos().
+ * @bssid: AP's BSSID
+ * @burst_period: For EDCA based ranging: Recommended value to be sent to the
+ *	AP. Measurement periodicity In units of 100ms. ignored if
+ *	num_of_bursts_exp = 0.
+ *	For non trigger based NDP ranging, the maximum time between
+ *	measurements in units of milliseconds.
+ * @samples_per_burst: the number of FTMs pairs in single Burst (1-31);
+ * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of
+ *	the number of measurement iterations (min 2^0 = 1, max 2^14)
+ * @sta_id: the station id of the AP. Only relevant when associated to the AP,
+ *	otherwise should be set to &IWL_MVM_INVALID_STA.
+ * @cipher: pairwise cipher suite for secured measurement.
+ *          &enum iwl_location_cipher.
+ * @hltk: HLTK to be used for secured 11az measurement
+ * @tk: TK to be used for secured 11az measurement
+ * @calib: An array of calibration values per FTM rx bandwidth.
+ *         If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the
+ *         calibration value that corresponds to the rx bandwidth of the FTM
+ *         frame.
+ * @beacon_interval: beacon interval of the AP in TUs. Only required if
+ *	&IWL_INITIATOR_AP_FLAGS_TB is set.
+ * @rx_pn: the next expected PN for protected management frames Rx. LE byte
+ *	order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id
+ *	is set to &IWL_MVM_INVALID_STA.
+ * @tx_pn: the next PN to use for protected management frames Tx. LE byte
+ *	order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id
+ *	is set to &IWL_MVM_INVALID_STA.
+ * @r2i_ndp_params: parameters for R2I NDP ranging negotiation.
+ *      bits 0 - 2: max LTF repetitions
+ *      bits 3 - 5: max number of spatial streams
+ *      bits 6 - 7: max total LTFs. One of
+ *		&enum ieee80211_range_params_max_total_ltf.
+ * @i2r_ndp_params: parameters for I2R NDP ranging negotiation.
+ *      bits 0 - 2: max LTF repetitions
+ *      bits 3 - 5: max number of spatial streams (supported values are < 2)
+ *      bits 6 - 7: max total LTFs. One of
+ *		&enum ieee80211_range_params_max_total_ltf.
+ * @min_time_between_msr: For non trigger based NDP ranging, the minimum time
+ *	between measurements in units of milliseconds
+ */
+struct iwl_tof_range_req_ap_entry_v10 {
+	__le32 initiator_ap_flags;
+	u8 band;
+	u8 channel_num;
+	u8 format_bw;
+	u8 ctrl_ch_position;
+	u8 bssid[ETH_ALEN];
+	__le16 burst_period;
+	u8 samples_per_burst;
+	u8 num_of_bursts;
+	u8 sta_id;
+	u8 cipher;
+	u8 hltk[HLTK_11AZ_LEN];
+	u8 tk[TK_11AZ_LEN];
+	__le16 calib[IWL_TOF_BW_NUM];
+	__le16 beacon_interval;
+	u8 rx_pn[IEEE80211_CCMP_PN_LEN];
+	u8 tx_pn[IEEE80211_CCMP_PN_LEN];
+	u8 r2i_ndp_params;
+	u8 i2r_ndp_params;
+	__le16 min_time_between_msr;
+} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_9 */
+
+/**
  * enum iwl_tof_response_mode
  * @IWL_MVM_TOF_RESPONSE_ASAP: report each AP measurement separately as soon as
  *			       possible (not supported for this release)
@@ -1230,6 +1359,34 @@ struct iwl_tof_range_req_cmd_v13 {
 	struct iwl_tof_range_req_ap_entry_v9 ap[IWL_MVM_TOF_MAX_APS];
 } __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_13 */
 
+/**
+ * struct iwl_tof_range_req_cmd_v14 - start measurement cmd
+ * @initiator_flags: see flags @ iwl_tof_initiator_flags
+ * @request_id: A Token incremented per request. The same Token will be
+ *		sent back in the range response
+ * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS)
+ * @range_req_bssid: ranging request BSSID
+ * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template.
+ *		  Bits set to 1 shall be randomized by the UMAC
+ * @macaddr_template: MAC address template to use for non-randomized bits
+ * @req_timeout_ms: Requested timeout of the response in units of milliseconds.
+ *	This is the session time for completing the measurement.
+ * @tsf_mac_id: report the measurement start time for each ap in terms of the
+ *	TSF of this mac id. 0xff to disable TSF reporting.
+ * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v10.
+ */
+struct iwl_tof_range_req_cmd_v14 {
+	__le32 initiator_flags;
+	u8 request_id;
+	u8 num_of_ap;
+	u8 range_req_bssid[ETH_ALEN];
+	u8 macaddr_mask[ETH_ALEN];
+	u8 macaddr_template[ETH_ALEN];
+	__le32 req_timeout_ms;
+	__le32 tsf_mac_id;
+	struct iwl_tof_range_req_ap_entry_v10 ap[IWL_MVM_TOF_MAX_APS];
+} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_13 */
+
 /*
  * enum iwl_tof_range_request_status - status of the sent request
  * @IWL_TOF_RANGE_REQUEST_STATUS_SUCCESSFUL - FW successfully received the