Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

1 files changed, 58 insertions, 17 deletions

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 1c9561665a67..310d8075f5d7 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -41,9 +41,22 @@
 /* watermark expressed in number of words */
 #define DEFAULT_F2_WATERMARK    0x8
 #define CY_4373_F2_WATERMARK    0x40
+#define CY_4373_F1_MESBUSYCTRL  (CY_4373_F2_WATERMARK | SBSDIO_MESBUSYCTRL_ENAB)
 #define CY_43012_F2_WATERMARK    0x60
-#define CY_4359_F2_WATERMARK	0x40
-#define CY_4359_F1_MESBUSYCTRL	(CY_4359_F2_WATERMARK | SBSDIO_MESBUSYCTRL_ENAB)
+#define CY_43012_MES_WATERMARK  0x50
+#define CY_43012_MESBUSYCTRL    (CY_43012_MES_WATERMARK | \
+				 SBSDIO_MESBUSYCTRL_ENAB)
+#define CY_4339_F2_WATERMARK    48
+#define CY_4339_MES_WATERMARK	80
+#define CY_4339_MESBUSYCTRL	(CY_4339_MES_WATERMARK | \
+				 SBSDIO_MESBUSYCTRL_ENAB)
+#define CY_43455_F2_WATERMARK	0x60
+#define CY_43455_MES_WATERMARK	0x50
+#define CY_43455_MESBUSYCTRL	(CY_43455_MES_WATERMARK | \
+				 SBSDIO_MESBUSYCTRL_ENAB)
+#define CY_435X_F2_WATERMARK	0x40
+#define CY_435X_F1_MESBUSYCTRL	(CY_435X_F2_WATERMARK | \
+				 SBSDIO_MESBUSYCTRL_ENAB)
 
 #ifdef DEBUG
 
@@ -315,15 +328,6 @@ struct rte_console {
 #define MAX_KSO_ATTEMPTS (PMU_MAX_TRANSITION_DLY/KSO_WAIT_US)
 #define BRCMF_SDIO_MAX_ACCESS_ERRORS	5
 
-/*
- * Conversion of 802.1D priority to precedence level
- */
-static uint prio2prec(u32 prio)
-{
-	return (prio == PRIO_8021D_NONE || prio == PRIO_8021D_BE) ?
-	       (prio^2) : prio;
-}
-
 #ifdef DEBUG
 /* Device console log buffer state */
 struct brcmf_console {
@@ -2774,7 +2778,13 @@ static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt)
 	skb_push(pkt, bus->tx_hdrlen);
 	/* precondition: IS_ALIGNED((unsigned long)(pkt->data), 2) */
 
-	prec = prio2prec((pkt->priority & PRIOMASK));
+	/* In WLAN, priority is always set by the AP using WMM parameters
+	 * and this need not always follow the standard 802.1d priority.
+	 * Based on AP WMM config, map from 802.1d priority to corresponding
+	 * precedence level.
+	 */
+	prec = brcmf_map_prio_to_prec(bus_if->drvr->config,
+				      (pkt->priority & PRIOMASK));
 
 	/* Check for existing queue, current flow-control,
 			 pending event, or pending clock */
@@ -4198,8 +4208,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 			brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
 					   &err);
 			brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL,
-					   CY_4373_F2_WATERMARK |
-					   SBSDIO_MESBUSYCTRL_ENAB, &err);
+					   CY_4373_F1_MESBUSYCTRL, &err);
 			break;
 		case SDIO_DEVICE_ID_BROADCOM_CYPRESS_43012:
 			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",
@@ -4211,19 +4220,51 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 			devctl |= SBSDIO_DEVCTL_F2WM_ENAB;
 			brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
 					   &err);
+			brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL,
+					   CY_43012_MESBUSYCTRL, &err);
+			break;
+		case SDIO_DEVICE_ID_BROADCOM_4339:
+			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes for 4339\n",
+				  CY_4339_F2_WATERMARK);
+			brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
+					   CY_4339_F2_WATERMARK, &err);
+			devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL,
+						   &err);
+			devctl |= SBSDIO_DEVCTL_F2WM_ENAB;
+			brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
+					   &err);
+			brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL,
+					   CY_4339_MESBUSYCTRL, &err);
+			break;
+		case SDIO_DEVICE_ID_BROADCOM_43455:
+			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes for 43455\n",
+				  CY_43455_F2_WATERMARK);
+			brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
+					   CY_43455_F2_WATERMARK, &err);
+			devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL,
+						   &err);
+			devctl |= SBSDIO_DEVCTL_F2WM_ENAB;
+			brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
+					   &err);
+			brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL,
+					   CY_43455_MESBUSYCTRL, &err);
 			break;
 		case SDIO_DEVICE_ID_BROADCOM_4359:
+			/* fallthrough */
+		case SDIO_DEVICE_ID_BROADCOM_4354:
+			/* fallthrough */
+		case SDIO_DEVICE_ID_BROADCOM_4356:
 			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",
-				  CY_4359_F2_WATERMARK);
+				  CY_435X_F2_WATERMARK);
 			brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
-					   CY_4359_F2_WATERMARK, &err);
+					   CY_435X_F2_WATERMARK, &err);
 			devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL,
 						   &err);
 			devctl |= SBSDIO_DEVCTL_F2WM_ENAB;
 			brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
 					   &err);
 			brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL,
-					   CY_4359_F1_MESBUSYCTRL, &err);
+					   CY_435X_F1_MESBUSYCTRL, &err);
 			break;
 		default:
 			brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,