phy: phy_ethtool_ksettings_set: Move after phy_start_aneg

This allows it to make use of a helper which assume the PHY is already
locked.

Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 53 insertions, 53 deletions

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 8457b829667e..ee584fa8b76d 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -243,59 +243,6 @@ static void phy_sanitize_settings(struct phy_device *phydev)
 	}
 }
 
-int phy_ethtool_ksettings_set(struct phy_device *phydev,
-			      const struct ethtool_link_ksettings *cmd)
-{
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
-	u8 autoneg = cmd->base.autoneg;
-	u8 duplex = cmd->base.duplex;
-	u32 speed = cmd->base.speed;
-
-	if (cmd->base.phy_address != phydev->mdio.addr)
-		return -EINVAL;
-
-	linkmode_copy(advertising, cmd->link_modes.advertising);
-
-	/* We make sure that we don't pass unsupported values in to the PHY */
-	linkmode_and(advertising, advertising, phydev->supported);
-
-	/* Verify the settings we care about. */
-	if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE)
-		return -EINVAL;
-
-	if (autoneg == AUTONEG_ENABLE && linkmode_empty(advertising))
-		return -EINVAL;
-
-	if (autoneg == AUTONEG_DISABLE &&
-	    ((speed != SPEED_1000 &&
-	      speed != SPEED_100 &&
-	      speed != SPEED_10) ||
-	     (duplex != DUPLEX_HALF &&
-	      duplex != DUPLEX_FULL)))
-		return -EINVAL;
-
-	phydev->autoneg = autoneg;
-
-	if (autoneg == AUTONEG_DISABLE) {
-		phydev->speed = speed;
-		phydev->duplex = duplex;
-	}
-
-	linkmode_copy(phydev->advertising, advertising);
-
-	linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-			 phydev->advertising, autoneg == AUTONEG_ENABLE);
-
-	phydev->master_slave_set = cmd->base.master_slave_cfg;
-	phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;
-
-	/* Restart the PHY */
-	phy_start_aneg(phydev);
-
-	return 0;
-}
-EXPORT_SYMBOL(phy_ethtool_ksettings_set);
-
 void phy_ethtool_ksettings_get(struct phy_device *phydev,
 			       struct ethtool_link_ksettings *cmd)
 {
@@ -802,6 +749,59 @@ static int phy_poll_aneg_done(struct phy_device *phydev)
 	return ret < 0 ? ret : 0;
 }
 
+int phy_ethtool_ksettings_set(struct phy_device *phydev,
+			      const struct ethtool_link_ksettings *cmd)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
+	u8 autoneg = cmd->base.autoneg;
+	u8 duplex = cmd->base.duplex;
+	u32 speed = cmd->base.speed;
+
+	if (cmd->base.phy_address != phydev->mdio.addr)
+		return -EINVAL;
+
+	linkmode_copy(advertising, cmd->link_modes.advertising);
+
+	/* We make sure that we don't pass unsupported values in to the PHY */
+	linkmode_and(advertising, advertising, phydev->supported);
+
+	/* Verify the settings we care about. */
+	if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE)
+		return -EINVAL;
+
+	if (autoneg == AUTONEG_ENABLE && linkmode_empty(advertising))
+		return -EINVAL;
+
+	if (autoneg == AUTONEG_DISABLE &&
+	    ((speed != SPEED_1000 &&
+	      speed != SPEED_100 &&
+	      speed != SPEED_10) ||
+	     (duplex != DUPLEX_HALF &&
+	      duplex != DUPLEX_FULL)))
+		return -EINVAL;
+
+	phydev->autoneg = autoneg;
+
+	if (autoneg == AUTONEG_DISABLE) {
+		phydev->speed = speed;
+		phydev->duplex = duplex;
+	}
+
+	linkmode_copy(phydev->advertising, advertising);
+
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+			 phydev->advertising, autoneg == AUTONEG_ENABLE);
+
+	phydev->master_slave_set = cmd->base.master_slave_cfg;
+	phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;
+
+	/* Restart the PHY */
+	phy_start_aneg(phydev);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_ksettings_set);
+
 /**
  * phy_speed_down - set speed to lowest speed supported by both link partners
  * @phydev: the phy_device struct