diff options
| author | Tao Ren <taoren@fb.com> | 2018-11-05 14:35:40 -0800 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2018-11-06 11:16:58 -0800 |
| commit | 042cb56478152b31c50bea8a784fc826891eb38e (patch) | |
| tree | 1a9d24aab5d73783ca5f629194a7352f43e362a9 /drivers/net/phy/broadcom.c | |
| parent | 8053e5b93eca9b011f7b79bb019bf1eeaaf96c4b (diff) | |
net: phy: Allow BCM54616S PHY to setup internal TX/RX clock delay
This patch allows users to enable/disable internal TX and/or RX clock
delay for BCM54616S PHYs so as to satisfy RGMII timing specifications.
On a particular platform, whether TX and/or RX clock delay is required
depends on how PHY connected to the MAC IP. This requirement can be
specified through "phy-mode" property in the platform device tree.
The patch is inspired by commit 733336262b28 ("net: phy: Allow BCM5481x
PHYs to setup internal TX/RX clock delay").
Signed-off-by: Tao Ren <taoren@fb.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy/broadcom.c')
| -rw-r--r-- | drivers/net/phy/broadcom.c | 18 |
1 files changed, 16 insertions, 2 deletions
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index e86ea105c802..704537010453 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -92,7 +92,7 @@ static int bcm54612e_config_init(struct phy_device *phydev) return 0; } -static int bcm5481x_config(struct phy_device *phydev) +static int bcm54xx_config_clock_delay(struct phy_device *phydev) { int rc, val; @@ -429,7 +429,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev) ret = genphy_config_aneg(phydev); /* Then we can set up the delay. */ - bcm5481x_config(phydev); + bcm54xx_config_clock_delay(phydev); if (of_property_read_bool(np, "enet-phy-lane-swap")) { /* Lane Swap - Undocumented register...magic! */ @@ -442,6 +442,19 @@ static int bcm5481_config_aneg(struct phy_device *phydev) return ret; } +static int bcm54616s_config_aneg(struct phy_device *phydev) +{ + int ret; + + /* Aneg firsly. */ + ret = genphy_config_aneg(phydev); + + /* Then we can set up the delay. */ + bcm54xx_config_clock_delay(phydev); + + return ret; +} + static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set) { int val; @@ -636,6 +649,7 @@ static struct phy_driver broadcom_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, + .config_aneg = bcm54616s_config_aneg, .ack_interrupt = bcm_phy_ack_intr, .config_intr = bcm_phy_config_intr, }, { |