diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-07-16 19:28:34 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-07-16 19:28:34 -0700 |
commit | 51835949dda3783d4639cfa74ce13a3c9829de00 (patch) | |
tree | 2b593de5eba6ecc73f7c58fc65fdaffae45c7323 /drivers/net/ethernet/ti/icssg/icssg_config.c | |
parent | 0434dbe32053d07d658165be681505120c6b1abc (diff) | |
parent | 77ae5e5b00720372af2860efdc4bc652ac682696 (diff) |
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
Diffstat (limited to 'drivers/net/ethernet/ti/icssg/icssg_config.c')
-rw-r--r-- | drivers/net/ethernet/ti/icssg/icssg_config.c | 337 |
1 files changed, 321 insertions, 16 deletions
diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.c b/drivers/net/ethernet/ti/icssg/icssg_config.c index 15f2235bf90f..dae52a83a378 100644 --- a/drivers/net/ethernet/ti/icssg/icssg_config.c +++ b/drivers/net/ethernet/ti/icssg/icssg_config.c @@ -107,28 +107,49 @@ static const struct map hwq_map[2][ICSSG_NUM_OTHER_QUEUES] = { }, }; +static void icssg_config_mii_init_switch(struct prueth_emac *emac) +{ + struct prueth *prueth = emac->prueth; + int mii = prueth_emac_slice(emac); + u32 txcfg_reg, pcnt_reg, txcfg; + struct regmap *mii_rt; + + mii_rt = prueth->mii_rt; + + txcfg_reg = (mii == ICSS_MII0) ? PRUSS_MII_RT_TXCFG0 : + PRUSS_MII_RT_TXCFG1; + pcnt_reg = (mii == ICSS_MII0) ? PRUSS_MII_RT_RX_PCNT0 : + PRUSS_MII_RT_RX_PCNT1; + + txcfg = PRUSS_MII_RT_TXCFG_TX_ENABLE | + PRUSS_MII_RT_TXCFG_TX_AUTO_PREAMBLE | + PRUSS_MII_RT_TXCFG_TX_IPG_WIRE_CLK_EN; + + if (emac->phy_if == PHY_INTERFACE_MODE_MII && mii == ICSS_MII1) + txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL; + else if (emac->phy_if != PHY_INTERFACE_MODE_MII && mii == ICSS_MII0) + txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL; + + regmap_write(mii_rt, txcfg_reg, txcfg); + regmap_write(mii_rt, pcnt_reg, 0x1); +} + static void icssg_config_mii_init(struct prueth_emac *emac) { - u32 rxcfg, txcfg, rxcfg_reg, txcfg_reg, pcnt_reg; struct prueth *prueth = emac->prueth; int slice = prueth_emac_slice(emac); + u32 txcfg, txcfg_reg, pcnt_reg; struct regmap *mii_rt; mii_rt = prueth->mii_rt; - rxcfg_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_RXCFG0 : - PRUSS_MII_RT_RXCFG1; txcfg_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_TXCFG0 : PRUSS_MII_RT_TXCFG1; pcnt_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_RX_PCNT0 : PRUSS_MII_RT_RX_PCNT1; - rxcfg = MII_RXCFG_DEFAULT; txcfg = MII_TXCFG_DEFAULT; - if (slice == ICSS_MII1) - rxcfg |= PRUSS_MII_RT_RXCFG_RX_MUX_SEL; - /* In MII mode TX lines swapped inside ICSSG, so TX_MUX_SEL cfg need * to be swapped also comparing to RGMII mode. */ @@ -137,7 +158,6 @@ static void icssg_config_mii_init(struct prueth_emac *emac) else if (emac->phy_if != PHY_INTERFACE_MODE_MII && slice == ICSS_MII1) txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL; - regmap_write(mii_rt, rxcfg_reg, rxcfg); regmap_write(mii_rt, txcfg_reg, txcfg); regmap_write(mii_rt, pcnt_reg, 0x1); } @@ -228,6 +248,7 @@ void icssg_config_ipg(struct prueth_emac *emac) icssg_mii_update_ipg(prueth->mii_rt, slice, ipg); } +EXPORT_SYMBOL_GPL(icssg_config_ipg); static void emac_r30_cmd_init(struct prueth_emac *emac) { @@ -257,6 +278,66 @@ static int emac_r30_is_done(struct prueth_emac *emac) return 1; } +static int prueth_switch_buffer_setup(struct prueth_emac *emac) +{ + struct icssg_buffer_pool_cfg __iomem *bpool_cfg; + struct icssg_rxq_ctx __iomem *rxq_ctx; + struct prueth *prueth = emac->prueth; + int slice = prueth_emac_slice(emac); + u32 addr; + int i; + + addr = lower_32_bits(prueth->msmcram.pa); + if (slice) + addr += PRUETH_NUM_BUF_POOLS * PRUETH_EMAC_BUF_POOL_SIZE; + + if (addr % SZ_64K) { + dev_warn(prueth->dev, "buffer pool needs to be 64KB aligned\n"); + return -EINVAL; + } + + bpool_cfg = emac->dram.va + BUFFER_POOL_0_ADDR_OFFSET; + /* workaround for f/w bug. bpool 0 needs to be initialized */ + for (i = 0; i < PRUETH_NUM_BUF_POOLS; i++) { + writel(addr, &bpool_cfg[i].addr); + writel(PRUETH_EMAC_BUF_POOL_SIZE, &bpool_cfg[i].len); + addr += PRUETH_EMAC_BUF_POOL_SIZE; + } + + if (!slice) + addr += PRUETH_NUM_BUF_POOLS * PRUETH_EMAC_BUF_POOL_SIZE; + else + addr += PRUETH_SW_NUM_BUF_POOLS_HOST * PRUETH_SW_BUF_POOL_SIZE_HOST; + + for (i = PRUETH_NUM_BUF_POOLS; + i < 2 * PRUETH_SW_NUM_BUF_POOLS_HOST + PRUETH_NUM_BUF_POOLS; + i++) { + /* The driver only uses first 4 queues per PRU so only initialize them */ + if (i % PRUETH_SW_NUM_BUF_POOLS_HOST < PRUETH_SW_NUM_BUF_POOLS_PER_PRU) { + writel(addr, &bpool_cfg[i].addr); + writel(PRUETH_SW_BUF_POOL_SIZE_HOST, &bpool_cfg[i].len); + addr += PRUETH_SW_BUF_POOL_SIZE_HOST; + } else { + writel(0, &bpool_cfg[i].addr); + writel(0, &bpool_cfg[i].len); + } + } + + if (!slice) + addr += PRUETH_SW_NUM_BUF_POOLS_HOST * PRUETH_SW_BUF_POOL_SIZE_HOST; + else + addr += PRUETH_EMAC_RX_CTX_BUF_SIZE; + + rxq_ctx = emac->dram.va + HOST_RX_Q_PRE_CONTEXT_OFFSET; + for (i = 0; i < 3; i++) + writel(addr, &rxq_ctx->start[i]); + + addr += PRUETH_EMAC_RX_CTX_BUF_SIZE; + writel(addr - SZ_2K, &rxq_ctx->end); + + return 0; +} + static int prueth_emac_buffer_setup(struct prueth_emac *emac) { struct icssg_buffer_pool_cfg __iomem *bpool_cfg; @@ -321,25 +402,63 @@ static void icssg_init_emac_mode(struct prueth *prueth) /* When the device is configured as a bridge and it is being brought * back to the emac mode, the host mac address has to be set as 0. */ + u32 addr = prueth->shram.pa + EMAC_ICSSG_SWITCH_DEFAULT_VLAN_TABLE_OFFSET; + int i; u8 mac[ETH_ALEN] = { 0 }; if (prueth->emacs_initialized) return; - regmap_update_bits(prueth->miig_rt, FDB_GEN_CFG1, - SMEM_VLAN_OFFSET_MASK, 0); - regmap_write(prueth->miig_rt, FDB_GEN_CFG2, 0); + /* Set VLAN TABLE address base */ + regmap_update_bits(prueth->miig_rt, FDB_GEN_CFG1, SMEM_VLAN_OFFSET_MASK, + addr << SMEM_VLAN_OFFSET); + /* Set enable VLAN aware mode, and FDBs for all PRUs */ + regmap_write(prueth->miig_rt, FDB_GEN_CFG2, (FDB_PRU0_EN | FDB_PRU1_EN | FDB_HOST_EN)); + prueth->vlan_tbl = (struct prueth_vlan_tbl __force *)(prueth->shram.va + + EMAC_ICSSG_SWITCH_DEFAULT_VLAN_TABLE_OFFSET); + for (i = 0; i < SZ_4K - 1; i++) { + prueth->vlan_tbl[i].fid = i; + prueth->vlan_tbl[i].fid_c1 = 0; + } /* Clear host MAC address */ icssg_class_set_host_mac_addr(prueth->miig_rt, mac); } +static void icssg_init_switch_mode(struct prueth *prueth) +{ + u32 addr = prueth->shram.pa + EMAC_ICSSG_SWITCH_DEFAULT_VLAN_TABLE_OFFSET; + int i; + + if (prueth->emacs_initialized) + return; + + /* Set VLAN TABLE address base */ + regmap_update_bits(prueth->miig_rt, FDB_GEN_CFG1, SMEM_VLAN_OFFSET_MASK, + addr << SMEM_VLAN_OFFSET); + /* Set enable VLAN aware mode, and FDBs for all PRUs */ + regmap_write(prueth->miig_rt, FDB_GEN_CFG2, FDB_EN_ALL); + prueth->vlan_tbl = (struct prueth_vlan_tbl __force *)(prueth->shram.va + + EMAC_ICSSG_SWITCH_DEFAULT_VLAN_TABLE_OFFSET); + for (i = 0; i < SZ_4K - 1; i++) { + prueth->vlan_tbl[i].fid = i; + prueth->vlan_tbl[i].fid_c1 = 0; + } + + if (prueth->hw_bridge_dev) + icssg_class_set_host_mac_addr(prueth->miig_rt, prueth->hw_bridge_dev->dev_addr); + icssg_set_pvid(prueth, prueth->default_vlan, PRUETH_PORT_HOST); +} + int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice) { void __iomem *config = emac->dram.va + ICSSG_CONFIG_OFFSET; struct icssg_flow_cfg __iomem *flow_cfg; int ret; - icssg_init_emac_mode(prueth); + if (prueth->is_switch_mode) + icssg_init_switch_mode(prueth); + else + icssg_init_emac_mode(prueth); memset_io(config, 0, TAS_GATE_MASK_LIST0); icssg_miig_queues_init(prueth, slice); @@ -353,7 +472,10 @@ int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice) regmap_update_bits(prueth->miig_rt, ICSSG_CFG_OFFSET, ICSSG_CFG_DEFAULT, ICSSG_CFG_DEFAULT); icssg_miig_set_interface_mode(prueth->miig_rt, slice, emac->phy_if); - icssg_config_mii_init(emac); + if (prueth->is_switch_mode) + icssg_config_mii_init_switch(emac); + else + icssg_config_mii_init(emac); icssg_config_ipg(emac); icssg_update_rgmii_cfg(prueth->miig_rt, emac); @@ -376,7 +498,10 @@ int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice) writeb(0, config + SPL_PKT_DEFAULT_PRIORITY); writeb(0, config + QUEUE_NUM_UNTAGGED); - ret = prueth_emac_buffer_setup(emac); + if (prueth->is_switch_mode) + ret = prueth_switch_buffer_setup(emac); + else + ret = prueth_emac_buffer_setup(emac); if (ret) return ret; @@ -384,6 +509,7 @@ int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice) return 0; } +EXPORT_SYMBOL_GPL(icssg_config); /* Bitmask for ICSSG r30 commands */ static const struct icssg_r30_cmd emac_r32_bitmask[] = { @@ -408,8 +534,8 @@ static const struct icssg_r30_cmd emac_r32_bitmask[] = { {{0xffef0000, EMAC_NONE, 0xffef0000, EMAC_NONE}} /* VLAN UNWARE*/ }; -int emac_set_port_state(struct prueth_emac *emac, - enum icssg_port_state_cmd cmd) +int icssg_set_port_state(struct prueth_emac *emac, + enum icssg_port_state_cmd cmd) { struct icssg_r30_cmd __iomem *p; int ret = -ETIMEDOUT; @@ -440,6 +566,7 @@ int emac_set_port_state(struct prueth_emac *emac, return ret; } +EXPORT_SYMBOL_GPL(icssg_set_port_state); void icssg_config_half_duplex(struct prueth_emac *emac) { @@ -451,6 +578,7 @@ void icssg_config_half_duplex(struct prueth_emac *emac) val = get_random_u32(); writel(val, emac->dram.va + HD_RAND_SEED_OFFSET); } +EXPORT_SYMBOL_GPL(icssg_config_half_duplex); void icssg_config_set_speed(struct prueth_emac *emac) { @@ -477,3 +605,180 @@ void icssg_config_set_speed(struct prueth_emac *emac) writeb(fw_speed, emac->dram.va + PORT_LINK_SPEED_OFFSET); } +EXPORT_SYMBOL_GPL(icssg_config_set_speed); + +int icssg_send_fdb_msg(struct prueth_emac *emac, struct mgmt_cmd *cmd, + struct mgmt_cmd_rsp *rsp) +{ + struct prueth *prueth = emac->prueth; + int slice = prueth_emac_slice(emac); + int addr, ret; + + addr = icssg_queue_pop(prueth, slice == 0 ? + ICSSG_CMD_POP_SLICE0 : ICSSG_CMD_POP_SLICE1); + if (addr < 0) + return addr; + + /* First 4 bytes have FW owned buffer linking info which should + * not be touched + */ + memcpy_toio(prueth->shram.va + addr + 4, cmd, sizeof(*cmd)); + icssg_queue_push(prueth, slice == 0 ? + ICSSG_CMD_PUSH_SLICE0 : ICSSG_CMD_PUSH_SLICE1, addr); + ret = read_poll_timeout(icssg_queue_pop, addr, addr >= 0, + 2000, 20000000, false, prueth, slice == 0 ? + ICSSG_RSP_POP_SLICE0 : ICSSG_RSP_POP_SLICE1); + if (ret) { + netdev_err(emac->ndev, "Timedout sending HWQ message\n"); + return ret; + } + + memcpy_fromio(rsp, prueth->shram.va + addr, sizeof(*rsp)); + /* Return buffer back for to pool */ + icssg_queue_push(prueth, slice == 0 ? + ICSSG_RSP_PUSH_SLICE0 : ICSSG_RSP_PUSH_SLICE1, addr); + + return 0; +} +EXPORT_SYMBOL_GPL(icssg_send_fdb_msg); + +static void icssg_fdb_setup(struct prueth_emac *emac, struct mgmt_cmd *fdb_cmd, + const unsigned char *addr, u8 fid, int cmd) +{ + int slice = prueth_emac_slice(emac); + u8 mac_fid[ETH_ALEN + 2]; + u16 fdb_slot; + + ether_addr_copy(mac_fid, addr); + + /* 1-1 VID-FID mapping is already setup */ + mac_fid[ETH_ALEN] = fid; + mac_fid[ETH_ALEN + 1] = 0; + + fdb_slot = bitrev32(crc32_le(0, mac_fid, 8)) & PRUETH_SWITCH_FDB_MASK; + + fdb_cmd->header = ICSSG_FW_MGMT_CMD_HEADER; + fdb_cmd->type = ICSSG_FW_MGMT_FDB_CMD_TYPE; + fdb_cmd->seqnum = ++(emac->prueth->icssg_hwcmdseq); + fdb_cmd->param = cmd; + fdb_cmd->param |= (slice << 4); + + memcpy(&fdb_cmd->cmd_args[0], addr, 4); + memcpy(&fdb_cmd->cmd_args[1], &addr[4], 2); + fdb_cmd->cmd_args[2] = fdb_slot; + + netdev_dbg(emac->ndev, "MAC %pM slot %X FID %X\n", addr, fdb_slot, fid); +} + +int icssg_fdb_add_del(struct prueth_emac *emac, const unsigned char *addr, + u8 vid, u8 fid_c2, bool add) +{ + struct mgmt_cmd_rsp fdb_cmd_rsp = { 0 }; + struct mgmt_cmd fdb_cmd = { 0 }; + u8 fid = vid; + int ret; + + icssg_fdb_setup(emac, &fdb_cmd, addr, fid, add ? ICSS_CMD_ADD_FDB : ICSS_CMD_DEL_FDB); + + fid_c2 |= ICSSG_FDB_ENTRY_VALID; + fdb_cmd.cmd_args[1] |= ((fid << 16) | (fid_c2 << 24)); + + ret = icssg_send_fdb_msg(emac, &fdb_cmd, &fdb_cmd_rsp); + if (ret) + return ret; + + WARN_ON(fdb_cmd.seqnum != fdb_cmd_rsp.seqnum); + if (fdb_cmd_rsp.status == 1) + return 0; + + return -EINVAL; +} +EXPORT_SYMBOL_GPL(icssg_fdb_add_del); + +int icssg_fdb_lookup(struct prueth_emac *emac, const unsigned char *addr, + u8 vid) +{ + struct mgmt_cmd_rsp fdb_cmd_rsp = { 0 }; + struct mgmt_cmd fdb_cmd = { 0 }; + struct prueth_fdb_slot *slot; + u8 fid = vid; + int ret, i; + + icssg_fdb_setup(emac, &fdb_cmd, addr, fid, ICSS_CMD_GET_FDB_SLOT); + + fdb_cmd.cmd_args[1] |= fid << 16; + + ret = icssg_send_fdb_msg(emac, &fdb_cmd, &fdb_cmd_rsp); + if (ret) + return ret; + + WARN_ON(fdb_cmd.seqnum != fdb_cmd_rsp.seqnum); + + slot = (struct prueth_fdb_slot __force *)(emac->dram.va + FDB_CMD_BUFFER); + for (i = 0; i < 4; i++) { + if (ether_addr_equal(addr, slot->mac) && vid == slot->fid) + return (slot->fid_c2 & ~ICSSG_FDB_ENTRY_VALID); + slot++; + } + + return 0; +} +EXPORT_SYMBOL_GPL(icssg_fdb_lookup); + +void icssg_vtbl_modify(struct prueth_emac *emac, u8 vid, u8 port_mask, + u8 untag_mask, bool add) +{ + struct prueth *prueth = emac->prueth; + struct prueth_vlan_tbl *tbl; + u8 fid_c1; + + tbl = prueth->vlan_tbl; + fid_c1 = tbl[vid].fid_c1; + + /* FID_C1: bit0..2 port membership mask, + * bit3..5 tagging mask for each port + * bit6 Stream VID (not handled currently) + * bit7 MC flood (not handled currently) + */ + if (add) { + fid_c1 |= (port_mask | port_mask << 3); + fid_c1 &= ~(untag_mask << 3); + } else { + fid_c1 &= ~(port_mask | port_mask << 3); + } + + tbl[vid].fid_c1 = fid_c1; +} +EXPORT_SYMBOL_GPL(icssg_vtbl_modify); + +u16 icssg_get_pvid(struct prueth_emac *emac) +{ + struct prueth *prueth = emac->prueth; + u32 pvid; + + if (emac->port_id == PRUETH_PORT_MII0) + pvid = readl(prueth->shram.va + EMAC_ICSSG_SWITCH_PORT1_DEFAULT_VLAN_OFFSET); + else + pvid = readl(prueth->shram.va + EMAC_ICSSG_SWITCH_PORT2_DEFAULT_VLAN_OFFSET); + + pvid = pvid >> 24; + + return pvid; +} +EXPORT_SYMBOL_GPL(icssg_get_pvid); + +void icssg_set_pvid(struct prueth *prueth, u8 vid, u8 port) +{ + u32 pvid; + + /* only 256 VLANs are supported */ + pvid = (u32 __force)cpu_to_be32((ETH_P_8021Q << 16) | (vid & 0xff)); + + if (port == PRUETH_PORT_MII0) + writel(pvid, prueth->shram.va + EMAC_ICSSG_SWITCH_PORT1_DEFAULT_VLAN_OFFSET); + else if (port == PRUETH_PORT_MII1) + writel(pvid, prueth->shram.va + EMAC_ICSSG_SWITCH_PORT2_DEFAULT_VLAN_OFFSET); + else + writel(pvid, prueth->shram.va + EMAC_ICSSG_SWITCH_PORT0_DEFAULT_VLAN_OFFSET); +} +EXPORT_SYMBOL_GPL(icssg_set_pvid); |