Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

1 files changed, 285 insertions, 10 deletions

diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
index 1f3e03124430..0852a34ade91 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
@@ -41,6 +41,41 @@ enum ice_ptp_fec_mode {
 	ICE_PTP_FEC_MODE_RS_FEC
 };
 
+enum eth56g_res_type {
+	ETH56G_PHY_REG_PTP,
+	ETH56G_PHY_MEM_PTP,
+	ETH56G_PHY_REG_XPCS,
+	ETH56G_PHY_REG_MAC,
+	ETH56G_PHY_REG_GPCS,
+	NUM_ETH56G_PHY_RES
+};
+
+enum ice_eth56g_link_spd {
+	ICE_ETH56G_LNK_SPD_1G,
+	ICE_ETH56G_LNK_SPD_2_5G,
+	ICE_ETH56G_LNK_SPD_10G,
+	ICE_ETH56G_LNK_SPD_25G,
+	ICE_ETH56G_LNK_SPD_40G,
+	ICE_ETH56G_LNK_SPD_50G,
+	ICE_ETH56G_LNK_SPD_50G2,
+	ICE_ETH56G_LNK_SPD_100G,
+	ICE_ETH56G_LNK_SPD_100G2,
+	NUM_ICE_ETH56G_LNK_SPD /* Must be last */
+};
+
+/**
+ * struct ice_phy_reg_info_eth56g - ETH56G PHY register parameters
+ * @base: base address for each PHY block
+ * @step: step between PHY lanes
+ *
+ * Characteristic information for the various PHY register parameters in the
+ * ETH56G devices
+ */
+struct ice_phy_reg_info_eth56g {
+	u32 base[NUM_ETH56G_PHY_RES];
+	u32 step;
+};
+
 /**
  * struct ice_time_ref_info_e82x
  * @pll_freq: Frequency of PLL that drives timer ticks in Hz
@@ -94,8 +129,75 @@ struct ice_vernier_info_e82x {
 	u32 rx_fixed_delay;
 };
 
+#define ICE_ETH56G_MAC_CFG_RX_OFFSET_INT	GENMASK(19, 9)
+#define ICE_ETH56G_MAC_CFG_RX_OFFSET_FRAC	GENMASK(8, 0)
+#define ICE_ETH56G_MAC_CFG_FRAC_W		9
 /**
- * struct ice_cgu_pll_params_e82x
+ * struct ice_eth56g_mac_reg_cfg - MAC config values for specific PTP registers
+ * @tx_mode: Tx timestamp compensation mode
+ * @tx_mk_dly: Tx timestamp marker start strobe delay
+ * @tx_cw_dly: Tx timestamp codeword start strobe delay
+ * @rx_mode: Rx timestamp compensation mode
+ * @rx_mk_dly: Rx timestamp marker start strobe delay
+ * @rx_cw_dly: Rx timestamp codeword start strobe delay
+ * @blks_per_clk: number of blocks transferred per clock cycle
+ * @blktime: block time, fixed point
+ * @mktime: marker time, fixed point
+ * @tx_offset: total Tx offset, fixed point
+ * @rx_offset: total Rx offset, contains value for bitslip/deskew, fixed point
+ *
+ * All fixed point registers except Rx offset are 23 bit unsigned ints with
+ * a 9 bit fractional.
+ * Rx offset is 11 bit unsigned int with a 9 bit fractional.
+ */
+struct ice_eth56g_mac_reg_cfg {
+	struct {
+		u8 def;
+		u8 rs;
+	} tx_mode;
+	u8 tx_mk_dly;
+	struct {
+		u8 def;
+		u8 onestep;
+	} tx_cw_dly;
+	struct {
+		u8 def;
+		u8 rs;
+	} rx_mode;
+	struct {
+		u8 def;
+		u8 rs;
+	} rx_mk_dly;
+	struct {
+		u8 def;
+		u8 rs;
+	} rx_cw_dly;
+	u8 blks_per_clk;
+	u16 blktime;
+	u16 mktime;
+	struct {
+		u32 serdes;
+		u32 no_fec;
+		u32 fc;
+		u32 rs;
+		u32 sfd;
+		u32 onestep;
+	} tx_offset;
+	struct {
+		u32 serdes;
+		u32 no_fec;
+		u32 fc;
+		u32 rs;
+		u32 sfd;
+		u32 bs_ds;
+	} rx_offset;
+};
+
+extern
+const struct ice_eth56g_mac_reg_cfg eth56g_mac_cfg[NUM_ICE_ETH56G_LNK_SPD];
+
+/**
+ * struct ice_cgu_pll_params_e82x - E82X CGU parameters
  * @refclk_pre_div: Reference clock pre-divisor
  * @feedback_div: Feedback divisor
  * @frac_n_div: Fractional divisor
@@ -185,9 +287,34 @@ struct ice_cgu_pin_desc {
 extern const struct
 ice_cgu_pll_params_e82x e822_cgu_params[NUM_ICE_TIME_REF_FREQ];
 
+/**
+ * struct ice_cgu_pll_params_e825c - E825C CGU parameters
+ * @tspll_ck_refclkfreq: tspll_ck_refclkfreq selection
+ * @tspll_ndivratio: ndiv ratio that goes directly to the pll
+ * @tspll_fbdiv_intgr: TS PLL integer feedback divide
+ * @tspll_fbdiv_frac:  TS PLL fractional feedback divide
+ * @ref1588_ck_div: clock divider for tspll ref
+ *
+ * Clock Generation Unit parameters used to program the PLL based on the
+ * selected TIME_REF/TCXO frequency.
+ */
+struct ice_cgu_pll_params_e825c {
+	u32 tspll_ck_refclkfreq;
+	u32 tspll_ndivratio;
+	u32 tspll_fbdiv_intgr;
+	u32 tspll_fbdiv_frac;
+	u32 ref1588_ck_div;
+};
+
+extern const struct
+ice_cgu_pll_params_e825c e825c_cgu_params[NUM_ICE_TIME_REF_FREQ];
+
 #define E810C_QSFP_C827_0_HANDLE 2
 #define E810C_QSFP_C827_1_HANDLE 3
 
+/* Table of constants related to possible ETH56G PHY resources */
+extern const struct ice_phy_reg_info_eth56g eth56g_phy_res[NUM_ETH56G_PHY_RES];
+
 /* Table of constants related to possible TIME_REF sources */
 extern const struct ice_time_ref_info_e82x e822_time_ref[NUM_ICE_TIME_REF_FREQ];
 
@@ -197,7 +324,9 @@ extern const struct ice_vernier_info_e82x e822_vernier[NUM_ICE_PTP_LNK_SPD];
 /* Increment value to generate nanoseconds in the GLTSYN_TIME_L register for
  * the E810 devices. Based off of a PLL with an 812.5 MHz frequency.
  */
-#define ICE_PTP_NOMINAL_INCVAL_E810 0x13b13b13bULL
+#define ICE_E810_PLL_FREQ		812500000
+#define ICE_PTP_NOMINAL_INCVAL_E810	0x13b13b13bULL
+#define E810_OUT_PROP_DELAY_NS 1
 
 /* Device agnostic functions */
 u8 ice_get_ptp_src_clock_index(struct ice_hw *hw);
@@ -208,11 +337,15 @@ int ice_ptp_init_time(struct ice_hw *hw, u64 time);
 int ice_ptp_write_incval(struct ice_hw *hw, u64 incval);
 int ice_ptp_write_incval_locked(struct ice_hw *hw, u64 incval);
 int ice_ptp_adj_clock(struct ice_hw *hw, s32 adj);
+int ice_ptp_clear_phy_offset_ready_e82x(struct ice_hw *hw);
 int ice_read_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx, u64 *tstamp);
 int ice_clear_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx);
 void ice_ptp_reset_ts_memory(struct ice_hw *hw);
 int ice_ptp_init_phc(struct ice_hw *hw);
+void ice_ptp_init_hw(struct ice_hw *hw);
 int ice_get_phy_tx_tstamp_ready(struct ice_hw *hw, u8 block, u64 *tstamp_ready);
+int ice_ptp_one_port_cmd(struct ice_hw *hw, u8 configured_port,
+			 enum ice_ptp_tmr_cmd configured_cmd);
 
 /* E822 family functions */
 int ice_read_quad_reg_e82x(struct ice_hw *hw, u8 quad, u16 offset, u32 *val);
@@ -264,9 +397,9 @@ int ice_stop_phy_timer_e82x(struct ice_hw *hw, u8 port, bool soft_reset);
 int ice_start_phy_timer_e82x(struct ice_hw *hw, u8 port);
 int ice_phy_cfg_tx_offset_e82x(struct ice_hw *hw, u8 port);
 int ice_phy_cfg_rx_offset_e82x(struct ice_hw *hw, u8 port);
+int ice_phy_cfg_intr_e82x(struct ice_hw *hw, u8 quad, bool ena, u8 threshold);
 
 /* E810 family functions */
-int ice_ptp_init_phy_e810(struct ice_hw *hw);
 int ice_read_sma_ctrl_e810t(struct ice_hw *hw, u8 *data);
 int ice_write_sma_ctrl_e810t(struct ice_hw *hw, u8 data);
 int ice_read_pca9575_reg_e810t(struct ice_hw *hw, u8 offset, u8 *data);
@@ -280,11 +413,44 @@ int ice_get_cgu_state(struct ice_hw *hw, u8 dpll_idx,
 		      u8 *ref_state, u8 *eec_mode, s64 *phase_offset,
 		      enum dpll_lock_status *dpll_state);
 int ice_get_cgu_rclk_pin_info(struct ice_hw *hw, u8 *base_idx, u8 *pin_num);
-
-void ice_ptp_init_phy_model(struct ice_hw *hw);
 int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id,
 				      unsigned long *caps);
 
+/* ETH56G family functions */
+int ice_ptp_read_tx_hwtstamp_status_eth56g(struct ice_hw *hw, u32 *ts_status);
+int ice_stop_phy_timer_eth56g(struct ice_hw *hw, u8 port, bool soft_reset);
+int ice_start_phy_timer_eth56g(struct ice_hw *hw, u8 port);
+int ice_phy_cfg_tx_offset_eth56g(struct ice_hw *hw, u8 port);
+int ice_phy_cfg_rx_offset_eth56g(struct ice_hw *hw, u8 port);
+int ice_phy_cfg_intr_eth56g(struct ice_hw *hw, u8 port, bool ena, u8 threshold);
+int ice_phy_cfg_ptp_1step_eth56g(struct ice_hw *hw, u8 port);
+
+#define ICE_ETH56G_NOMINAL_INCVAL	0x140000000ULL
+#define ICE_ETH56G_NOMINAL_PCS_REF_TUS	0x100000000ULL
+#define ICE_ETH56G_NOMINAL_PCS_REF_INC	0x300000000ULL
+#define ICE_ETH56G_NOMINAL_THRESH4	0x7777
+#define ICE_ETH56G_NOMINAL_TX_THRESH	0x6
+
+/**
+ * ice_get_base_incval - Get base clock increment value
+ * @hw: pointer to the HW struct
+ *
+ * Return: base clock increment value for supported PHYs, 0 otherwise
+ */
+static inline u64 ice_get_base_incval(struct ice_hw *hw)
+{
+	switch (hw->ptp.phy_model) {
+	case ICE_PHY_ETH56G:
+		return ICE_ETH56G_NOMINAL_INCVAL;
+	case ICE_PHY_E810:
+		return ICE_PTP_NOMINAL_INCVAL_E810;
+	case ICE_PHY_E82X:
+		return ice_e82x_nominal_incval(ice_e82x_time_ref(hw));
+	default:
+		return 0;
+	}
+}
+
 #define PFTSYN_SEM_BYTES	4
 
 #define ICE_PTP_CLOCK_INDEX_0	0x00
@@ -312,6 +478,7 @@ int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id,
 #define TS_CMD_MASK_E810		0xFF
 #define TS_CMD_MASK			0xF
 #define SYNC_EXEC_CMD			0x3
+#define TS_CMD_RX_TYPE			ICE_M(0x18, 0x4)
 
 /* Macros to derive port low and high addresses on both quads */
 #define P_Q0_L(a, p) ((((a) + (0x2000 * (p)))) & 0xFFFF)
@@ -344,11 +511,8 @@ int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id,
 #define Q_REG_TX_MEM_GBL_CFG		0xC08
 #define Q_REG_TX_MEM_GBL_CFG_LANE_TYPE_S	0
 #define Q_REG_TX_MEM_GBL_CFG_LANE_TYPE_M	BIT(0)
-#define Q_REG_TX_MEM_GBL_CFG_TX_TYPE_S	1
 #define Q_REG_TX_MEM_GBL_CFG_TX_TYPE_M	ICE_M(0xFF, 1)
-#define Q_REG_TX_MEM_GBL_CFG_INTR_THR_S	9
 #define Q_REG_TX_MEM_GBL_CFG_INTR_THR_M ICE_M(0x3F, 9)
-#define Q_REG_TX_MEM_GBL_CFG_INTR_ENA_S	15
 #define Q_REG_TX_MEM_GBL_CFG_INTR_ENA_M	BIT(15)
 
 /* Tx Timestamp data registers */
@@ -380,7 +544,7 @@ int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id,
 #define P_REG_TIMETUS_L			0x410
 #define P_REG_TIMETUS_U			0x414
 
-#define P_REG_40B_LOW_M			0xFF
+#define P_REG_40B_LOW_M			GENMASK(7, 0)
 #define P_REG_40B_HIGH_S		8
 
 /* PHY window length registers */
@@ -487,7 +651,7 @@ int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id,
 #define ETH_GLTSYN_SHADJ_H(_i)		(0x0300037C + ((_i) * 32))
 
 /* E810 timer command register */
-#define ETH_GLTSYN_CMD			0x03000344
+#define E810_ETH_GLTSYN_CMD		0x03000344
 
 /* Source timer incval macros */
 #define INCVAL_HIGH_M			0xFF
@@ -549,4 +713,115 @@ int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id,
 /* E810T PCA9575 IO controller pin control */
 #define ICE_E810T_P0_GNSS_PRSNT_N	BIT(4)
 
+/* ETH56G PHY register addresses */
+/* Timestamp PHY incval registers */
+#define PHY_REG_TIMETUS_L		0x8
+#define PHY_REG_TIMETUS_U		0xC
+
+/* Timestamp PCS registers */
+#define PHY_PCS_REF_TUS_L		0x18
+#define PHY_PCS_REF_TUS_U		0x1C
+
+/* Timestamp PCS ref incval registers */
+#define PHY_PCS_REF_INC_L		0x20
+#define PHY_PCS_REF_INC_U		0x24
+
+/* Timestamp init registers */
+#define PHY_REG_RX_TIMER_INC_PRE_L	0x64
+#define PHY_REG_RX_TIMER_INC_PRE_U	0x68
+#define PHY_REG_TX_TIMER_INC_PRE_L	0x44
+#define PHY_REG_TX_TIMER_INC_PRE_U	0x48
+
+/* Timestamp match and adjust target registers */
+#define PHY_REG_RX_TIMER_CNT_ADJ_L	0x6C
+#define PHY_REG_RX_TIMER_CNT_ADJ_U	0x70
+#define PHY_REG_TX_TIMER_CNT_ADJ_L	0x4C
+#define PHY_REG_TX_TIMER_CNT_ADJ_U	0x50
+
+/* Timestamp command registers */
+#define PHY_REG_TX_TMR_CMD		0x40
+#define PHY_REG_RX_TMR_CMD		0x60
+
+/* Phy offset ready registers */
+#define PHY_REG_TX_OFFSET_READY		0x54
+#define PHY_REG_RX_OFFSET_READY		0x74
+
+/* Phy total offset registers */
+#define PHY_REG_TOTAL_TX_OFFSET_L	0x38
+#define PHY_REG_TOTAL_TX_OFFSET_U	0x3C
+#define PHY_REG_TOTAL_RX_OFFSET_L	0x58
+#define PHY_REG_TOTAL_RX_OFFSET_U	0x5C
+
+/* Timestamp capture registers */
+#define PHY_REG_TX_CAPTURE_L		0x78
+#define PHY_REG_TX_CAPTURE_U		0x7C
+#define PHY_REG_RX_CAPTURE_L		0x8C
+#define PHY_REG_RX_CAPTURE_U		0x90
+
+/* Memory status registers */
+#define PHY_REG_TX_MEMORY_STATUS_L	0x80
+#define PHY_REG_TX_MEMORY_STATUS_U	0x84
+
+/* Interrupt config register */
+#define PHY_REG_TS_INT_CONFIG		0x88
+
+/* XIF mode config register */
+#define PHY_MAC_XIF_MODE		0x24
+#define PHY_MAC_XIF_1STEP_ENA_M		ICE_M(0x1, 5)
+#define PHY_MAC_XIF_TS_BIN_MODE_M	ICE_M(0x1, 11)
+#define PHY_MAC_XIF_TS_SFD_ENA_M	ICE_M(0x1, 20)
+#define PHY_MAC_XIF_GMII_TS_SEL_M	ICE_M(0x1, 21)
+
+/* GPCS config register */
+#define PHY_GPCS_CONFIG_REG0		0x268
+#define PHY_GPCS_CONFIG_REG0_TX_THR_M	ICE_M(0xF, 24)
+#define PHY_GPCS_BITSLIP		0x5C
+
+#define PHY_TS_INT_CONFIG_THRESHOLD_M	ICE_M(0x3F, 0)
+#define PHY_TS_INT_CONFIG_ENA_M		BIT(6)
+
+/* 1-step PTP config */
+#define PHY_PTP_1STEP_CONFIG		0x270
+#define PHY_PTP_1STEP_T1S_UP64_M	ICE_M(0xF, 4)
+#define PHY_PTP_1STEP_T1S_DELTA_M	ICE_M(0xF, 8)
+#define PHY_PTP_1STEP_PEER_DELAY(_port)	(0x274 + 4 * (_port))
+#define PHY_PTP_1STEP_PD_ADD_PD_M	ICE_M(0x1, 0)
+#define PHY_PTP_1STEP_PD_DELAY_M	ICE_M(0x3fffffff, 1)
+#define PHY_PTP_1STEP_PD_DLY_V_M	ICE_M(0x1, 31)
+
+/* Macros to derive offsets for TimeStampLow and TimeStampHigh */
+#define PHY_TSTAMP_L(x) (((x) * 8) + 0)
+#define PHY_TSTAMP_U(x) (((x) * 8) + 4)
+
+#define PHY_REG_REVISION		0x85000
+
+#define PHY_REG_DESKEW_0		0x94
+#define PHY_REG_DESKEW_0_RLEVEL		GENMASK(6, 0)
+#define PHY_REG_DESKEW_0_RLEVEL_FRAC	GENMASK(9, 7)
+#define PHY_REG_DESKEW_0_RLEVEL_FRAC_W	3
+#define PHY_REG_DESKEW_0_VALID		GENMASK(10, 10)
+
+#define PHY_REG_GPCS_BITSLIP		0x5C
+#define PHY_REG_SD_BIT_SLIP(_port_offset)	(0x29C + 4 * (_port_offset))
+#define PHY_REVISION_ETH56G		0x10200
+#define PHY_VENDOR_TXLANE_THRESH	0x2000C
+
+#define PHY_MAC_TSU_CONFIG		0x40
+#define PHY_MAC_TSU_CFG_RX_MODE_M	ICE_M(0x7, 0)
+#define PHY_MAC_TSU_CFG_RX_MII_CW_DLY_M	ICE_M(0x7, 4)
+#define PHY_MAC_TSU_CFG_RX_MII_MK_DLY_M	ICE_M(0x7, 8)
+#define PHY_MAC_TSU_CFG_TX_MODE_M	ICE_M(0x7, 12)
+#define PHY_MAC_TSU_CFG_TX_MII_CW_DLY_M	ICE_M(0x1F, 16)
+#define PHY_MAC_TSU_CFG_TX_MII_MK_DLY_M	ICE_M(0x1F, 21)
+#define PHY_MAC_TSU_CFG_BLKS_PER_CLK_M	ICE_M(0x1, 28)
+#define PHY_MAC_RX_MODULO		0x44
+#define PHY_MAC_RX_OFFSET		0x48
+#define PHY_MAC_RX_OFFSET_M		ICE_M(0xFFFFFF, 0)
+#define PHY_MAC_TX_MODULO		0x4C
+#define PHY_MAC_BLOCKTIME		0x50
+#define PHY_MAC_MARKERTIME		0x54
+#define PHY_MAC_TX_OFFSET		0x58
+
+#define PHY_PTP_INT_STATUS		0x7FD140
+
 #endif /* _ICE_PTP_HW_H_ */