diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-07-16 19:28:34 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-07-16 19:28:34 -0700 |
commit | 51835949dda3783d4639cfa74ce13a3c9829de00 (patch) | |
tree | 2b593de5eba6ecc73f7c58fc65fdaffae45c7323 /drivers/net/ethernet/cortina/gemini.c | |
parent | 0434dbe32053d07d658165be681505120c6b1abc (diff) | |
parent | 77ae5e5b00720372af2860efdc4bc652ac682696 (diff) |
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
Diffstat (limited to 'drivers/net/ethernet/cortina/gemini.c')
-rw-r--r-- | drivers/net/ethernet/cortina/gemini.c | 56 |
1 files changed, 40 insertions, 16 deletions
diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c index 5f0c9e1771db..73e1c71c5092 100644 --- a/drivers/net/ethernet/cortina/gemini.c +++ b/drivers/net/ethernet/cortina/gemini.c @@ -79,7 +79,8 @@ MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); #define GMAC0_IRQ4_8 (GMAC0_MIB_INT_BIT | GMAC0_RX_OVERRUN_INT_BIT) #define GMAC_OFFLOAD_FEATURES (NETIF_F_SG | NETIF_F_IP_CSUM | \ - NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM) + NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM | \ + NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6) /** * struct gmac_queue_page - page buffer per-page info @@ -287,13 +288,13 @@ static void gmac_set_flow_control(struct net_device *netdev, bool tx, bool rx) spin_unlock_irqrestore(&port->config_lock, flags); } -static void gmac_speed_set(struct net_device *netdev) +static void gmac_adjust_link(struct net_device *netdev) { struct gemini_ethernet_port *port = netdev_priv(netdev); struct phy_device *phydev = netdev->phydev; union gmac_status status, old_status; - int pause_tx = 0; - int pause_rx = 0; + bool pause_tx = false; + bool pause_rx = false; status.bits32 = readl(port->gmac_base + GMAC_STATUS); old_status.bits32 = status.bits32; @@ -328,14 +329,9 @@ static void gmac_speed_set(struct net_device *netdev) } if (phydev->duplex == DUPLEX_FULL) { - u16 lcladv = phy_read(phydev, MII_ADVERTISE); - u16 rmtadv = phy_read(phydev, MII_LPA); - u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); - - if (cap & FLOW_CTRL_RX) - pause_rx = 1; - if (cap & FLOW_CTRL_TX) - pause_tx = 1; + phy_get_pause(phydev, &pause_tx, &pause_rx); + netdev_dbg(netdev, "set negotiated pause params pause TX = %s, pause RX = %s\n", + pause_tx ? "ON" : "OFF", pause_rx ? "ON" : "OFF"); } gmac_set_flow_control(netdev, pause_tx, pause_rx); @@ -366,7 +362,7 @@ static int gmac_setup_phy(struct net_device *netdev) phy = of_phy_get_and_connect(netdev, dev->of_node, - gmac_speed_set); + gmac_adjust_link); if (!phy) return -ENODEV; netdev->phydev = phy; @@ -1148,13 +1144,25 @@ static int gmac_map_tx_bufs(struct net_device *netdev, struct sk_buff *skb, skb_frag_t *skb_frag; dma_addr_t mapping; void *buffer; + u16 mss; int ret; - /* TODO: implement proper TSO using MTU in word3 */ word1 = skb->len; word3 = SOF_BIT; - if (skb->len >= ETH_FRAME_LEN) { + mss = skb_shinfo(skb)->gso_size; + if (mss) { + /* This means we are dealing with TCP and skb->len is the + * sum total of all the segments. The TSO will deal with + * chopping this up for us. + */ + /* The accelerator needs the full frame size here */ + mss += skb_tcp_all_headers(skb); + netdev_dbg(netdev, "segment offloading mss = %04x len=%04x\n", + mss, skb->len); + word1 |= TSS_MTU_ENABLE_BIT; + word3 |= mss; + } else if (skb->len >= ETH_FRAME_LEN) { /* Hardware offloaded checksumming isn't working on frames * bigger than 1514 bytes. A hypothesis about this is that the * checksum buffer is only 1518 bytes, so when the frames get @@ -1169,7 +1177,9 @@ static int gmac_map_tx_bufs(struct net_device *netdev, struct sk_buff *skb, return ret; } word1 |= TSS_BYPASS_BIT; - } else if (skb->ip_summed == CHECKSUM_PARTIAL) { + } + + if (skb->ip_summed == CHECKSUM_PARTIAL) { int tcp = 0; /* We do not switch off the checksumming on non TCP/UDP @@ -2116,6 +2126,19 @@ static void gmac_get_pauseparam(struct net_device *netdev, pparam->autoneg = true; } +static int gmac_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pparam) +{ + struct phy_device *phydev = netdev->phydev; + + if (!pparam->autoneg) + return -EOPNOTSUPP; + + phy_set_asym_pause(phydev, pparam->rx_pause, pparam->tx_pause); + + return 0; +} + static void gmac_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *rp, struct kernel_ethtool_ringparam *kernel_rp, @@ -2236,6 +2259,7 @@ static const struct ethtool_ops gmac_351x_ethtool_ops = { .set_link_ksettings = gmac_set_ksettings, .nway_reset = gmac_nway_reset, .get_pauseparam = gmac_get_pauseparam, + .set_pauseparam = gmac_set_pauseparam, .get_ringparam = gmac_get_ringparam, .set_ringparam = gmac_set_ringparam, .get_coalesce = gmac_get_coalesce, |