Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

1 files changed, 111 insertions, 54 deletions

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-rx.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-rx.c
index ced8d9c81f8c..fe897f3e4c12 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-rx.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-rx.c
@@ -2,7 +2,7 @@
 //
 // mcp251xfd - Microchip MCP251xFD Family CAN controller driver
 //
-// Copyright (c) 2019, 2020, 2021 Pengutronix,
+// Copyright (c) 2019, 2020, 2021, 2023 Pengutronix,
 //               Marc Kleine-Budde <kernel@pengutronix.de>
 //
 // Based on:
@@ -16,23 +16,14 @@
 
 #include "mcp251xfd.h"
 
-static inline int
-mcp251xfd_rx_head_get_from_chip(const struct mcp251xfd_priv *priv,
-				const struct mcp251xfd_rx_ring *ring,
-				u8 *rx_head, bool *fifo_empty)
+static inline bool mcp251xfd_rx_fifo_sta_empty(const u32 fifo_sta)
 {
-	u32 fifo_sta;
-	int err;
-
-	err = regmap_read(priv->map_reg, MCP251XFD_REG_FIFOSTA(ring->fifo_nr),
-			  &fifo_sta);
-	if (err)
-		return err;
-
-	*rx_head = FIELD_GET(MCP251XFD_REG_FIFOSTA_FIFOCI_MASK, fifo_sta);
-	*fifo_empty = !(fifo_sta & MCP251XFD_REG_FIFOSTA_TFNRFNIF);
+	return !(fifo_sta & MCP251XFD_REG_FIFOSTA_TFNRFNIF);
+}
 
-	return 0;
+static inline bool mcp251xfd_rx_fifo_sta_full(const u32 fifo_sta)
+{
+	return fifo_sta & MCP251XFD_REG_FIFOSTA_TFERFFIF;
 }
 
 static inline int
@@ -80,29 +71,49 @@ mcp251xfd_check_rx_tail(const struct mcp251xfd_priv *priv,
 }
 
 static int
-mcp251xfd_rx_ring_update(const struct mcp251xfd_priv *priv,
-			 struct mcp251xfd_rx_ring *ring)
+mcp251xfd_get_rx_len(const struct mcp251xfd_priv *priv,
+		     const struct mcp251xfd_rx_ring *ring,
+		     u8 *len_p)
 {
-	u32 new_head;
-	u8 chip_rx_head;
-	bool fifo_empty;
+	const u8 shift = ring->obj_num_shift_to_u8;
+	u8 chip_head, tail, len;
+	u32 fifo_sta;
 	int err;
 
-	err = mcp251xfd_rx_head_get_from_chip(priv, ring, &chip_rx_head,
-					      &fifo_empty);
-	if (err || fifo_empty)
+	err = regmap_read(priv->map_reg, MCP251XFD_REG_FIFOSTA(ring->fifo_nr),
+			  &fifo_sta);
+	if (err)
+		return err;
+
+	if (mcp251xfd_rx_fifo_sta_empty(fifo_sta)) {
+		*len_p = 0;
+		return 0;
+	}
+
+	if (mcp251xfd_rx_fifo_sta_full(fifo_sta)) {
+		*len_p = ring->obj_num;
+		return 0;
+	}
+
+	chip_head = FIELD_GET(MCP251XFD_REG_FIFOSTA_FIFOCI_MASK, fifo_sta);
+
+	err =  mcp251xfd_check_rx_tail(priv, ring);
+	if (err)
 		return err;
+	tail = mcp251xfd_get_rx_tail(ring);
 
-	/* chip_rx_head, is the next RX-Object filled by the HW.
-	 * The new RX head must be >= the old head.
+	/* First shift to full u8. The subtraction works on signed
+	 * values, that keeps the difference steady around the u8
+	 * overflow. The right shift acts on len, which is an u8.
 	 */
-	new_head = round_down(ring->head, ring->obj_num) + chip_rx_head;
-	if (new_head <= ring->head)
-		new_head += ring->obj_num;
+	BUILD_BUG_ON(sizeof(ring->obj_num) != sizeof(chip_head));
+	BUILD_BUG_ON(sizeof(ring->obj_num) != sizeof(tail));
+	BUILD_BUG_ON(sizeof(ring->obj_num) != sizeof(len));
 
-	ring->head = new_head;
+	len = (chip_head << shift) - (tail << shift);
+	*len_p = len >> shift;
 
-	return mcp251xfd_check_rx_tail(priv, ring);
+	return 0;
 }
 
 static void
@@ -148,8 +159,6 @@ mcp251xfd_hw_rx_obj_to_skb(const struct mcp251xfd_priv *priv,
 
 	if (!(hw_rx_obj->flags & MCP251XFD_OBJ_FLAGS_RTR))
 		memcpy(cfd->data, hw_rx_obj->data, cfd->len);
-
-	mcp251xfd_skb_set_timestamp(priv, skb, hw_rx_obj->ts);
 }
 
 static int
@@ -160,8 +169,26 @@ mcp251xfd_handle_rxif_one(struct mcp251xfd_priv *priv,
 	struct net_device_stats *stats = &priv->ndev->stats;
 	struct sk_buff *skb;
 	struct canfd_frame *cfd;
+	u64 timestamp;
 	int err;
 
+	/* According to mcp2518fd erratum DS80000789E 6. the FIFOCI
+	 * bits of a FIFOSTA register, here the RX FIFO head index
+	 * might be corrupted and we might process past the RX FIFO's
+	 * head into old CAN frames.
+	 *
+	 * Compare the timestamp of currently processed CAN frame with
+	 * last valid frame received. Abort with -EBADMSG if an old
+	 * CAN frame is detected.
+	 */
+	timestamp = timecounter_cyc2time(&priv->tc, hw_rx_obj->ts);
+	if (timestamp <= ring->last_valid) {
+		stats->rx_fifo_errors++;
+
+		return -EBADMSG;
+	}
+	ring->last_valid = timestamp;
+
 	if (hw_rx_obj->flags & MCP251XFD_OBJ_FLAGS_FDF)
 		skb = alloc_canfd_skb(priv->ndev, &cfd);
 	else
@@ -172,6 +199,7 @@ mcp251xfd_handle_rxif_one(struct mcp251xfd_priv *priv,
 		return 0;
 	}
 
+	mcp251xfd_skb_set_timestamp(skb, timestamp);
 	mcp251xfd_hw_rx_obj_to_skb(priv, hw_rx_obj, skb);
 	err = can_rx_offload_queue_timestamp(&priv->offload, skb, hw_rx_obj->ts);
 	if (err)
@@ -198,51 +226,80 @@ mcp251xfd_rx_obj_read(const struct mcp251xfd_priv *priv,
 }
 
 static int
+mcp251xfd_handle_rxif_ring_uinc(const struct mcp251xfd_priv *priv,
+				struct mcp251xfd_rx_ring *ring,
+				u8 len)
+{
+	int offset;
+	int err;
+
+	if (!len)
+		return 0;
+
+	ring->head += len;
+
+	/* Increment the RX FIFO tail pointer 'len' times in a
+	 * single SPI message.
+	 *
+	 * Note:
+	 * Calculate offset, so that the SPI transfer ends on
+	 * the last message of the uinc_xfer array, which has
+	 * "cs_change == 0", to properly deactivate the chip
+	 * select.
+	 */
+	offset = ARRAY_SIZE(ring->uinc_xfer) - len;
+	err = spi_sync_transfer(priv->spi,
+				ring->uinc_xfer + offset, len);
+	if (err)
+		return err;
+
+	ring->tail += len;
+
+	return 0;
+}
+
+static int
 mcp251xfd_handle_rxif_ring(struct mcp251xfd_priv *priv,
 			   struct mcp251xfd_rx_ring *ring)
 {
 	struct mcp251xfd_hw_rx_obj_canfd *hw_rx_obj = ring->obj;
-	u8 rx_tail, len;
+	u8 rx_tail, len, l;
 	int err, i;
 
-	err = mcp251xfd_rx_ring_update(priv, ring);
+	err = mcp251xfd_get_rx_len(priv, ring, &len);
 	if (err)
 		return err;
 
-	while ((len = mcp251xfd_get_rx_linear_len(ring))) {
-		int offset;
-
+	while ((l = mcp251xfd_get_rx_linear_len(ring, len))) {
 		rx_tail = mcp251xfd_get_rx_tail(ring);
 
 		err = mcp251xfd_rx_obj_read(priv, ring, hw_rx_obj,
-					    rx_tail, len);
+					    rx_tail, l);
 		if (err)
 			return err;
 
-		for (i = 0; i < len; i++) {
+		for (i = 0; i < l; i++) {
 			err = mcp251xfd_handle_rxif_one(priv, ring,
 							(void *)hw_rx_obj +
 							i * ring->obj_size);
-			if (err)
+
+			/* -EBADMSG means we're affected by mcp2518fd
+			 * erratum DS80000789E 6., i.e. the timestamp
+			 * in the RX object is older that the last
+			 * valid received CAN frame. Don't process any
+			 * further and mark processed frames as good.
+			 */
+			if (err == -EBADMSG)
+				return mcp251xfd_handle_rxif_ring_uinc(priv, ring, i);
+			else if (err)
 				return err;
 		}
 
-		/* Increment the RX FIFO tail pointer 'len' times in a
-		 * single SPI message.
-		 *
-		 * Note:
-		 * Calculate offset, so that the SPI transfer ends on
-		 * the last message of the uinc_xfer array, which has
-		 * "cs_change == 0", to properly deactivate the chip
-		 * select.
-		 */
-		offset = ARRAY_SIZE(ring->uinc_xfer) - len;
-		err = spi_sync_transfer(priv->spi,
-					ring->uinc_xfer + offset, len);
+		err = mcp251xfd_handle_rxif_ring_uinc(priv, ring, l);
 		if (err)
 			return err;
 
-		ring->tail += len;
+		len -= l;
 	}
 
 	return 0;