Merge 5.3-rc4 into driver-core-next

We need the driver core fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 files changed, 14 insertions, 10 deletions

diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c
index 8d55cdd69ff4..435c7d7377a3 100644
--- a/drivers/i2c/busses/i2c-at91-core.c
+++ b/drivers/i2c/busses/i2c-at91-core.c
@@ -142,7 +142,7 @@ static struct at91_twi_pdata sama5d4_config = {
 
 static struct at91_twi_pdata sama5d2_config = {
 	.clk_max_div = 7,
-	.clk_offset = 4,
+	.clk_offset = 3,
 	.has_unre_flag = true,
 	.has_alt_cmd = true,
 	.has_hold_field = true,
diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
index e87232f2e708..a3fcc35ffd3b 100644
--- a/drivers/i2c/busses/i2c-at91-master.c
+++ b/drivers/i2c/busses/i2c-at91-master.c
@@ -122,9 +122,11 @@ static void at91_twi_write_next_byte(struct at91_twi_dev *dev)
 	writeb_relaxed(*dev->buf, dev->base + AT91_TWI_THR);
 
 	/* send stop when last byte has been written */
-	if (--dev->buf_len == 0)
+	if (--dev->buf_len == 0) {
 		if (!dev->use_alt_cmd)
 			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
+		at91_twi_write(dev, AT91_TWI_IDR, AT91_TWI_TXRDY);
+	}
 
 	dev_dbg(dev->dev, "wrote 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
 
@@ -542,9 +544,8 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 		} else {
 			at91_twi_write_next_byte(dev);
 			at91_twi_write(dev, AT91_TWI_IER,
-				       AT91_TWI_TXCOMP |
-				       AT91_TWI_NACK |
-				       AT91_TWI_TXRDY);
+				       AT91_TWI_TXCOMP | AT91_TWI_NACK |
+				       (dev->buf_len ? AT91_TWI_TXRDY : 0));
 		}
 	}
 
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 2c7f145a036e..d7fd76baec92 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -392,16 +392,18 @@ static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c,
 static void bcm_iproc_i2c_read_valid_bytes(struct bcm_iproc_i2c_dev *iproc_i2c)
 {
 	struct i2c_msg *msg = iproc_i2c->msg;
+	uint32_t val;
 
 	/* Read valid data from RX FIFO */
 	while (iproc_i2c->rx_bytes < msg->len) {
-		if (!((iproc_i2c_rd_reg(iproc_i2c, M_FIFO_CTRL_OFFSET) >> M_FIFO_RX_CNT_SHIFT)
-		      & M_FIFO_RX_CNT_MASK))
+		val = iproc_i2c_rd_reg(iproc_i2c, M_RX_OFFSET);
+
+		/* rx fifo empty */
+		if (!((val >> M_RX_STATUS_SHIFT) & M_RX_STATUS_MASK))
 			break;
 
 		msg->buf[iproc_i2c->rx_bytes] =
-			(iproc_i2c_rd_reg(iproc_i2c, M_RX_OFFSET) >>
-			M_RX_DATA_SHIFT) & M_RX_DATA_MASK;
+			(val >> M_RX_DATA_SHIFT) & M_RX_DATA_MASK;
 		iproc_i2c->rx_bytes++;
 	}
 }
diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
index cfc76b5de726..5a1235fd86bb 100644
--- a/drivers/i2c/busses/i2c-nvidia-gpu.c
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -364,7 +364,7 @@ static void gpu_i2c_remove(struct pci_dev *pdev)
 /*
  * We need gpu_i2c_suspend() even if it is stub, for runtime pm to work
  * correctly. Without it, lspci shows runtime pm status as "D0" for the card.
- * Documentation/power/pci.txt also insists for driver to provide this.
+ * Documentation/power/pci.rst also insists for driver to provide this.
  */
 static __maybe_unused int gpu_i2c_suspend(struct device *dev)
 {
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index d97fb857b0ea..c98ef4c4a0c9 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -435,6 +435,7 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 		 * fall through to the write state, as we will need to
 		 * send a byte as well
 		 */
+		/* Fall through */
 
 	case STATE_WRITE:
 		/*