Merge branch 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "I2C has quite some patches for you this time. I hope it is the move to
  per-driver-maintainers which is now showing results. We will see.

  The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI),
  larger refactoring of the Designware, Tegra, and PXA drivers, the
  Cadence driver supports being a slave now, and there is support to
  instanciate SPD eeproms for well-known cases (which will be
  user-visible because the i801 driver supports it), and some
  devm_platform_ioremap_resource() conversions which blow up the
  diffstat.

  Note that I applied the Nuvoton driver quite late, so some minor fixup
  patches arrived during the merge window. I chose to apply them right
  away because they were trivial"

* 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits)
  i2c: Drop stray comma in MODULE_AUTHOR statements
  i2c: npcm7xx: npcm_i2caddr[] can be static
  MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC
  i2c: npcm7xx: Fix a couple of error codes in probe
  i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n
  i2c: npcm7xx: Remove unnecessary parentheses
  i2c: npcm7xx: Add support for slave mode for Nuvoton
  i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver
  dt-bindings: i2c: npcm7xx: add NPCM I2C controller
  i2c: pxa: don't error out if there's no pinctrl
  i2c: add 'single-master' property to generic bindings
  i2c: designware: Add Baikal-T1 System I2C support
  i2c: designware: Move reg-space remapping into a dedicated function
  i2c: designware: Retrieve quirk flags as early as possible
  i2c: designware: Convert driver to using regmap API
  i2c: designware: Discard Cherry Trail model flag
  i2c: designware: Add Baytrail sem config DW I2C platform dependency
  i2c: designware: slave: Set DW I2C core module dependency
  i2c: designware: Use `-y` to build multi-object modules
  dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller
  ...

69 files changed, 5489 insertions, 1229 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 2ddca08f8a76..735bf31a3fdf 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -475,8 +475,8 @@ config I2C_BCM_KONA
 
 config I2C_BRCMSTB
 	tristate "BRCM Settop/DSL I2C controller"
-	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_63XX || \
-		   COMPILE_TEST
+	depends on ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC || \
+		   ARCH_BCM_63XX || COMPILE_TEST
 	default y
 	help
 	  If you say yes to this option, support will be included for the
@@ -526,22 +526,12 @@ config I2C_DAVINCI
 
 config I2C_DESIGNWARE_CORE
 	tristate
-
-config I2C_DESIGNWARE_PLATFORM
-	tristate "Synopsys DesignWare Platform"
-	select I2C_DESIGNWARE_CORE
-	depends on (ACPI && COMMON_CLK) || !ACPI
-	help
-	  If you say yes to this option, support will be included for the
-	  Synopsys DesignWare I2C adapter.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-designware-platform.
+	select REGMAP
 
 config I2C_DESIGNWARE_SLAVE
 	bool "Synopsys DesignWare Slave"
+	depends on I2C_DESIGNWARE_CORE
 	select I2C_SLAVE
-	depends on I2C_DESIGNWARE_PLATFORM
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C slave adapter.
@@ -549,20 +539,22 @@ config I2C_DESIGNWARE_SLAVE
 	  This is not a standalone module, this module compiles together with
 	  i2c-designware-core.
 
-config I2C_DESIGNWARE_PCI
-	tristate "Synopsys DesignWare PCI"
-	depends on PCI
+config I2C_DESIGNWARE_PLATFORM
+	tristate "Synopsys DesignWare Platform"
+	depends on (ACPI && COMMON_CLK) || !ACPI
 	select I2C_DESIGNWARE_CORE
+	select MFD_SYSCON if MIPS_BAIKAL_T1
 	help
 	  If you say yes to this option, support will be included for the
-	  Synopsys DesignWare I2C adapter. Only master mode is supported.
+	  Synopsys DesignWare I2C adapter.
 
 	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-designware-pci.
+	  will be called i2c-designware-platform.
 
 config I2C_DESIGNWARE_BAYTRAIL
 	bool "Intel Baytrail I2C semaphore support"
 	depends on ACPI
+	depends on I2C_DESIGNWARE_PLATFORM
 	depends on (I2C_DESIGNWARE_PLATFORM=m && IOSF_MBI) || \
 		   (I2C_DESIGNWARE_PLATFORM=y && IOSF_MBI=y)
 	help
@@ -572,6 +564,17 @@ config I2C_DESIGNWARE_BAYTRAIL
 	  the platform firmware controlling it. You should say Y if running on
 	  a BayTrail system using the AXP288.
 
+config I2C_DESIGNWARE_PCI
+	tristate "Synopsys DesignWare PCI"
+	depends on PCI
+	select I2C_DESIGNWARE_CORE
+	help
+	  If you say yes to this option, support will be included for the
+	  Synopsys DesignWare I2C adapter. Only master mode is supported.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-designware-pci.
+
 config I2C_DIGICOLOR
 	tristate "Conexant Digicolor I2C driver"
 	depends on ARCH_DIGICOLOR || COMPILE_TEST
@@ -791,6 +794,15 @@ config I2C_NOMADIK
 	  I2C interface from ST-Ericsson's Nomadik and Ux500 architectures,
 	  as well as the STA2X11 PCIe I/O HUB.
 
+config I2C_NPCM7XX
+	tristate "Nuvoton I2C Controller"
+	depends on ARCH_NPCM7XX || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  Nuvoton I2C controller, which is available on the NPCM7xx BMC
+	  controller.
+	  Driver can also support slave mode (select I2C_SLAVE).
+
 config I2C_OCORES
 	tristate "OpenCores I2C Controller"
 	help
@@ -885,6 +897,16 @@ config I2C_PXA_SLAVE
 	  is necessary for systems where the PXA may be a target on the
 	  I2C bus.
 
+config I2C_QCOM_CCI
+	tristate "Qualcomm Camera Control Interface"
+	depends on ARCH_QCOM || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  built-in camera control interface on the Qualcomm SoCs.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-qcom-cci.
+
 config I2C_QCOM_GENI
 	tristate "Qualcomm Technologies Inc.'s GENI based I2C controller"
 	depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 25d60889713c..306d5dc3f417 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -48,16 +48,15 @@ obj-$(CONFIG_I2C_CADENCE)	+= i2c-cadence.o
 obj-$(CONFIG_I2C_CBUS_GPIO)	+= i2c-cbus-gpio.o
 obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o
 obj-$(CONFIG_I2C_DAVINCI)	+= i2c-davinci.o
-obj-$(CONFIG_I2C_DESIGNWARE_CORE)	+= i2c-designware-core.o
-i2c-designware-core-objs := i2c-designware-common.o i2c-designware-master.o
-ifeq ($(CONFIG_I2C_DESIGNWARE_SLAVE),y)
-i2c-designware-core-objs += i2c-designware-slave.o
-endif
-obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM)	+= i2c-designware-platform.o
-i2c-designware-platform-objs := i2c-designware-platdrv.o
+obj-$(CONFIG_I2C_DESIGNWARE_CORE)			+= i2c-designware-core.o
+i2c-designware-core-y					:= i2c-designware-common.o
+i2c-designware-core-y					+= i2c-designware-master.o
+i2c-designware-core-$(CONFIG_I2C_DESIGNWARE_SLAVE) 	+= i2c-designware-slave.o
+obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM)			+= i2c-designware-platform.o
+i2c-designware-platform-y 				:= i2c-designware-platdrv.o
 i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o
-obj-$(CONFIG_I2C_DESIGNWARE_PCI)	+= i2c-designware-pci.o
-i2c-designware-pci-objs := i2c-designware-pcidrv.o
+obj-$(CONFIG_I2C_DESIGNWARE_PCI)			+= i2c-designware-pci.o
+i2c-designware-pci-y					:= i2c-designware-pcidrv.o
 obj-$(CONFIG_I2C_DIGICOLOR)	+= i2c-digicolor.o
 obj-$(CONFIG_I2C_EFM32)		+= i2c-efm32.o
 obj-$(CONFIG_I2C_EG20T)		+= i2c-eg20t.o
@@ -81,6 +80,7 @@ obj-$(CONFIG_I2C_MT7621)	+= i2c-mt7621.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_MXS)		+= i2c-mxs.o
 obj-$(CONFIG_I2C_NOMADIK)	+= i2c-nomadik.o
+obj-$(CONFIG_I2C_NPCM7XX)	+= i2c-npcm7xx.o
 obj-$(CONFIG_I2C_OCORES)	+= i2c-ocores.o
 obj-$(CONFIG_I2C_OMAP)		+= i2c-omap.o
 obj-$(CONFIG_I2C_OWL)		+= i2c-owl.o
@@ -91,6 +91,7 @@ obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
 obj-$(CONFIG_I2C_PUV3)		+= i2c-puv3.o
 obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
 obj-$(CONFIG_I2C_PXA_PCI)	+= i2c-pxa-pci.o
+obj-$(CONFIG_I2C_QCOM_CCI)	+= i2c-qcom-cci.o
 obj-$(CONFIG_I2C_QCOM_GENI)	+= i2c-qcom-geni.o
 obj-$(CONFIG_I2C_QUP)		+= i2c-qup.o
 obj-$(CONFIG_I2C_RIIC)		+= i2c-riic.o
diff --git a/drivers/i2c/busses/i2c-altera.c b/drivers/i2c/busses/i2c-altera.c
index 16ddc26c00e6..7d62cbda6e06 100644
--- a/drivers/i2c/busses/i2c-altera.c
+++ b/drivers/i2c/busses/i2c-altera.c
@@ -69,7 +69,6 @@
  * @fifo_size: size of the FIFO passed in.
  * @isr_mask: cached copy of local ISR enables.
  * @isr_status: cached copy of local ISR status.
- * @lock: spinlock for IRQ synchronization.
  * @isr_mutex: mutex for IRQ thread.
  */
 struct altr_i2c_dev {
@@ -86,18 +85,14 @@ struct altr_i2c_dev {
 	u32 fifo_size;
 	u32 isr_mask;
 	u32 isr_status;
-	spinlock_t lock;	/* IRQ synchronization */
 	struct mutex isr_mutex;
 };
 
 static void
 altr_i2c_int_enable(struct altr_i2c_dev *idev, u32 mask, bool enable)
 {
-	unsigned long flags;
 	u32 int_en;
 
-	spin_lock_irqsave(&idev->lock, flags);
-
 	int_en = readl(idev->base + ALTR_I2C_ISER);
 	if (enable)
 		idev->isr_mask = int_en | mask;
@@ -105,8 +100,6 @@ altr_i2c_int_enable(struct altr_i2c_dev *idev, u32 mask, bool enable)
 		idev->isr_mask = int_en & ~mask;
 
 	writel(idev->isr_mask, idev->base + ALTR_I2C_ISER);
-
-	spin_unlock_irqrestore(&idev->lock, flags);
 }
 
 static void altr_i2c_int_clear(struct altr_i2c_dev *idev, u32 mask)
@@ -346,6 +339,7 @@ static int altr_i2c_xfer_msg(struct altr_i2c_dev *idev, struct i2c_msg *msg)
 
 	time_left = wait_for_completion_timeout(&idev->msg_complete,
 						ALTR_I2C_XFER_TIMEOUT);
+	mutex_lock(&idev->isr_mutex);
 	altr_i2c_int_enable(idev, imask, false);
 
 	value = readl(idev->base + ALTR_I2C_STATUS) & ALTR_I2C_STAT_CORE;
@@ -358,6 +352,7 @@ static int altr_i2c_xfer_msg(struct altr_i2c_dev *idev, struct i2c_msg *msg)
 	}
 
 	altr_i2c_core_disable(idev);
+	mutex_unlock(&idev->isr_mutex);
 
 	return idev->msg_err;
 }
@@ -389,23 +384,19 @@ static const struct i2c_algorithm altr_i2c_algo = {
 static int altr_i2c_probe(struct platform_device *pdev)
 {
 	struct altr_i2c_dev *idev = NULL;
-	struct resource *res;
 	int irq, ret;
 
 	idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
 	if (!idev)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	idev->base = devm_ioremap_resource(&pdev->dev, res);
+	idev->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(idev->base))
 		return PTR_ERR(idev->base);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "missing interrupt resource\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	idev->i2c_clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(idev->i2c_clk)) {
@@ -415,7 +406,6 @@ static int altr_i2c_probe(struct platform_device *pdev)
 
 	idev->dev = &pdev->dev;
 	init_completion(&idev->msg_complete);
-	spin_lock_init(&idev->lock);
 	mutex_init(&idev->isr_mutex);
 
 	ret = device_property_read_u32(idev->dev, "fifo-size",
@@ -453,7 +443,9 @@ static int altr_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	mutex_lock(&idev->isr_mutex);
 	altr_i2c_init(idev);
+	mutex_unlock(&idev->isr_mutex);
 
 	i2c_set_adapdata(&idev->adapter, idev);
 	strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name));
diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c
index 3da1a8acecb5..e14edd236108 100644
--- a/drivers/i2c/busses/i2c-at91-core.c
+++ b/drivers/i2c/busses/i2c-at91-core.c
@@ -131,6 +131,7 @@ static struct at91_twi_pdata sama5d2_config = {
 	.has_dig_filtr = true,
 	.has_adv_dig_filtr = true,
 	.has_ana_filtr = true,
+	.has_clear_cmd = false,	/* due to errata, CLEAR cmd is not working */
 };
 
 static struct at91_twi_pdata sam9x60_config = {
@@ -142,6 +143,7 @@ static struct at91_twi_pdata sam9x60_config = {
 	.has_dig_filtr = true,
 	.has_adv_dig_filtr = true,
 	.has_ana_filtr = true,
+	.has_clear_cmd = true,
 };
 
 static const struct of_device_id atmel_twi_dt_ids[] = {
diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
index 37b96ac9dfae..363d540a8345 100644
--- a/drivers/i2c/busses/i2c-at91-master.c
+++ b/drivers/i2c/busses/i2c-at91-master.c
@@ -480,7 +480,6 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 	unsigned long time_left;
 	bool has_unre_flag = dev->pdata->has_unre_flag;
 	bool has_alt_cmd = dev->pdata->has_alt_cmd;
-	struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
 
 	/*
 	 * WARNING: the TXCOMP bit in the Status Register is NOT a clear on
@@ -641,11 +640,12 @@ error:
 			       AT91_TWI_THRCLR | AT91_TWI_LOCKCLR);
 	}
 
-	if (rinfo->get_sda && !(rinfo->get_sda(&dev->adapter))) {
-		dev_dbg(dev->dev,
-			"SDA is down; clear bus using gpio\n");
-		i2c_recover_bus(&dev->adapter);
-	}
+	/*
+	 * some faulty I2C slave devices might hold SDA down;
+	 * we can send a bus clear command, hoping that the pins will be
+	 * released
+	 */
+	i2c_recover_bus(&dev->adapter);
 
 	return ret;
 }
@@ -830,7 +830,7 @@ static void at91_unprepare_twi_recovery(struct i2c_adapter *adap)
 	pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
 }
 
-static int at91_init_twi_recovery_info(struct platform_device *pdev,
+static int at91_init_twi_recovery_gpio(struct platform_device *pdev,
 				       struct at91_twi_dev *dev)
 {
 	struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
@@ -894,6 +894,41 @@ static int at91_init_twi_recovery_info(struct platform_device *pdev,
 	return 0;
 }
 
+static int at91_twi_recover_bus_cmd(struct i2c_adapter *adap)
+{
+	struct at91_twi_dev *dev = i2c_get_adapdata(adap);
+
+	dev->transfer_status |= at91_twi_read(dev, AT91_TWI_SR);
+	if (!(dev->transfer_status & AT91_TWI_SDA)) {
+		dev_dbg(dev->dev, "SDA is down; sending bus clear command\n");
+		if (dev->use_alt_cmd) {
+			unsigned int acr;
+
+			acr = at91_twi_read(dev, AT91_TWI_ACR);
+			acr &= ~AT91_TWI_ACR_DATAL_MASK;
+			at91_twi_write(dev, AT91_TWI_ACR, acr);
+		}
+		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_CLEAR);
+	}
+
+	return 0;
+}
+
+static int at91_init_twi_recovery_info(struct platform_device *pdev,
+				       struct at91_twi_dev *dev)
+{
+	struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
+	bool has_clear_cmd = dev->pdata->has_clear_cmd;
+
+	if (!has_clear_cmd)
+		return at91_init_twi_recovery_gpio(pdev, dev);
+
+	rinfo->recover_bus = at91_twi_recover_bus_cmd;
+	dev->adapter.bus_recovery_info = rinfo;
+
+	return 0;
+}
+
 int at91_twi_probe_master(struct platform_device *pdev,
 			  u32 phy_addr, struct at91_twi_dev *dev)
 {
diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
index f57a6cab96b4..7e7b4955ca7f 100644
--- a/drivers/i2c/busses/i2c-at91.h
+++ b/drivers/i2c/busses/i2c-at91.h
@@ -36,6 +36,7 @@
 #define	AT91_TWI_SVDIS		BIT(5)	/* Slave Transfer Disable */
 #define	AT91_TWI_QUICK		BIT(6)	/* SMBus quick command */
 #define	AT91_TWI_SWRST		BIT(7)	/* Software Reset */
+#define	AT91_TWI_CLEAR		BIT(15) /* Bus clear command */
 #define	AT91_TWI_ACMEN		BIT(16) /* Alternative Command Mode Enable */
 #define	AT91_TWI_ACMDIS		BIT(17) /* Alternative Command Mode Disable */
 #define	AT91_TWI_THRCLR		BIT(24) /* Transmit Holding Register Clear */
@@ -69,6 +70,8 @@
 #define	AT91_TWI_NACK		BIT(8)	/* Not Acknowledged */
 #define	AT91_TWI_EOSACC		BIT(11)	/* End Of Slave Access */
 #define	AT91_TWI_LOCK		BIT(23) /* TWI Lock due to Frame Errors */
+#define	AT91_TWI_SCL		BIT(24) /* TWI SCL status */
+#define	AT91_TWI_SDA		BIT(25) /* TWI SDA status */
 
 #define	AT91_TWI_INT_MASK \
 	(AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY | AT91_TWI_NACK \
@@ -81,7 +84,8 @@
 #define	AT91_TWI_THR		0x0034	/* Transmit Holding Register */
 
 #define	AT91_TWI_ACR		0x0040	/* Alternative Command Register */
-#define	AT91_TWI_ACR_DATAL(len)	((len) & 0xff)
+#define	AT91_TWI_ACR_DATAL_MASK	GENMASK(15, 0)
+#define	AT91_TWI_ACR_DATAL(len)	((len) & AT91_TWI_ACR_DATAL_MASK)
 #define	AT91_TWI_ACR_DIR	BIT(8)
 
 #define AT91_TWI_FILTR		0x0044
@@ -118,6 +122,7 @@ struct at91_twi_pdata {
 	bool has_dig_filtr;
 	bool has_adv_dig_filtr;
 	bool has_ana_filtr;
+	bool has_clear_cmd;
 	struct at_dma_slave dma_slave;
 };
 
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index be3681d08a8d..5294b73beca8 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -734,7 +734,6 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct axxia_i2c_dev *idev = NULL;
-	struct resource *res;
 	void __iomem *base;
 	int ret = 0;
 
@@ -742,16 +741,13 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 	if (!idev)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(&pdev->dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
 	idev->irq = platform_get_irq(pdev, 0);
-	if (idev->irq < 0) {
-		dev_err(&pdev->dev, "missing interrupt resource\n");
+	if (idev->irq < 0)
 		return idev->irq;
-	}
 
 	idev->i2c_clk = devm_clk_get(&pdev->dev, "i2c");
 	if (IS_ERR(idev->i2c_clk)) {
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index d091a12596ad..8a3c98866fb7 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -79,6 +79,7 @@
 #define M_CMD_STATUS_RX_FIFO_FULL    0x6
 #define M_CMD_PROTOCOL_SHIFT         9
 #define M_CMD_PROTOCOL_MASK          0xf
+#define M_CMD_PROTOCOL_QUICK         0x0
 #define M_CMD_PROTOCOL_BLK_WR        0x7
 #define M_CMD_PROTOCOL_BLK_RD        0x8
 #define M_CMD_PROTOCOL_PROCESS       0xa
@@ -768,7 +769,11 @@ static int bcm_iproc_i2c_xfer_internal(struct bcm_iproc_i2c_dev *iproc_i2c,
 	 * number of bytes to read
 	 */
 	val = BIT(M_CMD_START_BUSY_SHIFT);
-	if (msg->flags & I2C_M_RD) {
+
+	if (msg->len == 0) {
+		/* SMBUS QUICK Command (Read/Write) */
+		val |= (M_CMD_PROTOCOL_QUICK << M_CMD_PROTOCOL_SHIFT);
+	} else if (msg->flags & I2C_M_RD) {
 		u32 protocol;
 
 		iproc_i2c->rx_bytes = 0;
@@ -830,8 +835,7 @@ static uint32_t bcm_iproc_i2c_functionality(struct i2c_adapter *adap)
 {
 	u32 val;
 
-	/* We do not support the SMBUS Quick command */
-	val = I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+	val = I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 
 	if (adap->algo->reg_slave)
 		val |= I2C_FUNC_SLAVE;
diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
index 572aebbb254e..ed5e1275ae46 100644
--- a/drivers/i2c/busses/i2c-bcm-kona.c
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -750,7 +750,6 @@ static int bcm_kona_i2c_probe(struct platform_device *pdev)
 	int rc = 0;
 	struct bcm_kona_i2c_dev *dev;
 	struct i2c_adapter *adap;
-	struct resource *iomem;
 
 	/* Allocate memory for private data structure */
 	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
@@ -762,8 +761,7 @@ static int bcm_kona_i2c_probe(struct platform_device *pdev)
 	init_completion(&dev->done);
 
 	/* Map hardware registers */
-	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dev->base = devm_ioremap_resource(dev->device, iomem);
+	dev->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(dev->base))
 		return -ENOMEM;
 
@@ -823,8 +821,7 @@ static int bcm_kona_i2c_probe(struct platform_device *pdev)
 	/* Get the interrupt number */
 	dev->irq = platform_get_irq(pdev, 0);
 	if (dev->irq < 0) {
-		dev_err(dev->device, "no irq resource\n");
-		rc = -ENODEV;
+		rc = dev->irq;
 		goto probe_disable_clk;
 	}
 
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index 169a2836922d..d4e0a0f6732a 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -647,20 +647,22 @@ static int brcmstb_i2c_probe(struct platform_device *pdev)
 		int_name = NULL;
 
 	/* Get the interrupt number */
-	dev->irq = platform_get_irq(pdev, 0);
+	dev->irq = platform_get_irq_optional(pdev, 0);
 
 	/* disable the bsc interrupt line */
 	brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);
 
 	/* register the ISR handler */
-	rc = devm_request_irq(&pdev->dev, dev->irq, brcmstb_i2c_isr,
-			      IRQF_SHARED,
-			      int_name ? int_name : pdev->name,
-			      dev);
-
-	if (rc) {
-		dev_dbg(dev->device, "falling back to polling mode");
-		dev->irq = -1;
+	if (dev->irq >= 0) {
+		rc = devm_request_irq(&pdev->dev, dev->irq, brcmstb_i2c_isr,
+				      IRQF_SHARED,
+				      int_name ? int_name : pdev->name,
+				      dev);
+
+		if (rc) {
+			dev_dbg(dev->device, "falling back to polling mode");
+			dev->irq = -1;
+		}
 	}
 
 	if (of_property_read_u32(dev->device->of_node,
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 89d58f7d2a25..4b72398af505 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -23,6 +23,7 @@
 #define CDNS_I2C_ISR_OFFSET		0x10 /* IRQ Status Register, RW */
 #define CDNS_I2C_XFER_SIZE_OFFSET	0x14 /* Transfer Size Register, RW */
 #define CDNS_I2C_TIME_OUT_OFFSET	0x1C /* Time Out Register, RW */
+#define CDNS_I2C_IMR_OFFSET		0x20 /* IRQ Mask Register, RO */
 #define CDNS_I2C_IER_OFFSET		0x24 /* IRQ Enable Register, WO */
 #define CDNS_I2C_IDR_OFFSET		0x28 /* IRQ Disable Register, WO */
 
@@ -40,9 +41,17 @@
 #define CDNS_I2C_CR_DIVB_SHIFT		8
 #define CDNS_I2C_CR_DIVB_MASK		(0x3f << CDNS_I2C_CR_DIVB_SHIFT)
 
+#define CDNS_I2C_CR_MASTER_EN_MASK	(CDNS_I2C_CR_NEA | \
+					 CDNS_I2C_CR_ACK_EN | \
+					 CDNS_I2C_CR_MS)
+
+#define CDNS_I2C_CR_SLAVE_EN_MASK	~CDNS_I2C_CR_MASTER_EN_MASK
+
 /* Status Register Bit mask definitions */
 #define CDNS_I2C_SR_BA		BIT(8)
+#define CDNS_I2C_SR_TXDV	BIT(6)
 #define CDNS_I2C_SR_RXDV	BIT(5)
+#define CDNS_I2C_SR_RXRW	BIT(3)
 
 /*
  * I2C Address Register Bit mask definitions
@@ -91,6 +100,14 @@
 					 CDNS_I2C_IXR_DATA | \
 					 CDNS_I2C_IXR_COMP)
 
+#define CDNS_I2C_IXR_SLAVE_INTR_MASK	(CDNS_I2C_IXR_RX_UNF | \
+					 CDNS_I2C_IXR_TX_OVF | \
+					 CDNS_I2C_IXR_RX_OVF | \
+					 CDNS_I2C_IXR_TO | \
+					 CDNS_I2C_IXR_NACK | \
+					 CDNS_I2C_IXR_DATA | \
+					 CDNS_I2C_IXR_COMP)
+
 #define CDNS_I2C_TIMEOUT		msecs_to_jiffies(1000)
 /* timeout for pm runtime autosuspend */
 #define CNDS_I2C_PM_TIMEOUT		1000	/* ms */
@@ -114,6 +131,32 @@
 #define cdns_i2c_readreg(offset)       readl_relaxed(id->membase + offset)
 #define cdns_i2c_writereg(val, offset) writel_relaxed(val, id->membase + offset)
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+/**
+ * enum cdns_i2c_mode - I2C Controller current operating mode
+ *
+ * @CDNS_I2C_MODE_SLAVE:       I2C controller operating in slave mode
+ * @CDNS_I2C_MODE_MASTER:      I2C Controller operating in master mode
+ */
+enum cdns_i2c_mode {
+	CDNS_I2C_MODE_SLAVE,
+	CDNS_I2C_MODE_MASTER,
+};
+
+/**
+ * enum cdns_i2c_slave_mode - Slave state when I2C is operating in slave mode
+ *
+ * @CDNS_I2C_SLAVE_STATE_IDLE: I2C slave idle
+ * @CDNS_I2C_SLAVE_STATE_SEND: I2C slave sending data to master
+ * @CDNS_I2C_SLAVE_STATE_RECV: I2C slave receiving data from master
+ */
+enum cdns_i2c_slave_state {
+	CDNS_I2C_SLAVE_STATE_IDLE,
+	CDNS_I2C_SLAVE_STATE_SEND,
+	CDNS_I2C_SLAVE_STATE_RECV,
+};
+#endif
+
 /**
  * struct cdns_i2c - I2C device private data structure
  *
@@ -135,6 +178,10 @@
  * @clk:		Pointer to struct clk
  * @clk_rate_change_nb:	Notifier block for clock rate changes
  * @quirks:		flag for broken hold bit usage in r1p10
+ * @ctrl_reg_diva_divb: value of fields DIV_A and DIV_B from CR register
+ * @slave:		Registered slave instance.
+ * @dev_mode:		I2C operating role(master/slave).
+ * @slave_state:	I2C Slave state(idle/read/write).
  */
 struct cdns_i2c {
 	struct device		*dev;
@@ -155,6 +202,12 @@ struct cdns_i2c {
 	struct clk *clk;
 	struct notifier_block clk_rate_change_nb;
 	u32 quirks;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	u16 ctrl_reg_diva_divb;
+	struct i2c_client *slave;
+	enum cdns_i2c_mode dev_mode;
+	enum cdns_i2c_slave_state slave_state;
+#endif
 };
 
 struct cdns_platform_data {
@@ -183,17 +236,155 @@ static inline bool cdns_is_holdquirk(struct cdns_i2c *id, bool hold_wrkaround)
 		(id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1));
 }
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static void cdns_i2c_set_mode(enum cdns_i2c_mode mode, struct cdns_i2c *id)
+{
+	/* Disable all interrupts */
+	cdns_i2c_writereg(CDNS_I2C_IXR_ALL_INTR_MASK, CDNS_I2C_IDR_OFFSET);
+
+	/* Clear FIFO and transfer size */
+	cdns_i2c_writereg(CDNS_I2C_CR_CLR_FIFO, CDNS_I2C_CR_OFFSET);
+
+	/* Update device mode and state */
+	id->dev_mode = mode;
+	id->slave_state = CDNS_I2C_SLAVE_STATE_IDLE;
+
+	switch (mode) {
+	case CDNS_I2C_MODE_MASTER:
+		/* Enable i2c master */
+		cdns_i2c_writereg(id->ctrl_reg_diva_divb |
+				  CDNS_I2C_CR_MASTER_EN_MASK,
+				  CDNS_I2C_CR_OFFSET);
+		/*
+		 * This delay is needed to give the IP some time to switch to
+		 * the master mode. With lower values(like 110 us) i2cdetect
+		 * will not detect any slave and without this delay, the IP will
+		 * trigger a timeout interrupt.
+		 */
+		usleep_range(115, 125);
+		break;
+	case CDNS_I2C_MODE_SLAVE:
+		/* Enable i2c slave */
+		cdns_i2c_writereg(id->ctrl_reg_diva_divb &
+				  CDNS_I2C_CR_SLAVE_EN_MASK,
+				  CDNS_I2C_CR_OFFSET);
+
+		/* Setting slave address */
+		cdns_i2c_writereg(id->slave->addr & CDNS_I2C_ADDR_MASK,
+				  CDNS_I2C_ADDR_OFFSET);
+
+		/* Enable slave send/receive interrupts */
+		cdns_i2c_writereg(CDNS_I2C_IXR_SLAVE_INTR_MASK,
+				  CDNS_I2C_IER_OFFSET);
+		break;
+	}
+}
+
+static void cdns_i2c_slave_rcv_data(struct cdns_i2c *id)
+{
+	u8 bytes;
+	unsigned char data;
+
+	/* Prepare backend for data reception */
+	if (id->slave_state == CDNS_I2C_SLAVE_STATE_IDLE) {
+		id->slave_state = CDNS_I2C_SLAVE_STATE_RECV;
+		i2c_slave_event(id->slave, I2C_SLAVE_WRITE_REQUESTED, NULL);
+	}
+
+	/* Fetch number of bytes to receive */
+	bytes = cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
+
+	/* Read data and send to backend */
+	while (bytes--) {
+		data = cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET);
+		i2c_slave_event(id->slave, I2C_SLAVE_WRITE_RECEIVED, &data);
+	}
+}
+
+static void cdns_i2c_slave_send_data(struct cdns_i2c *id)
+{
+	u8 data;
+
+	/* Prepare backend for data transmission */
+	if (id->slave_state == CDNS_I2C_SLAVE_STATE_IDLE) {
+		id->slave_state = CDNS_I2C_SLAVE_STATE_SEND;
+		i2c_slave_event(id->slave, I2C_SLAVE_READ_REQUESTED, &data);
+	} else {
+		i2c_slave_event(id->slave, I2C_SLAVE_READ_PROCESSED, &data);
+	}
+
+	/* Send data over bus */
+	cdns_i2c_writereg(data, CDNS_I2C_DATA_OFFSET);
+}
+
 /**
- * cdns_i2c_isr - Interrupt handler for the I2C device
- * @irq:	irq number for the I2C device
- * @ptr:	void pointer to cdns_i2c structure
+ * cdns_i2c_slave_isr - Interrupt handler for the I2C device in slave role
+ * @ptr:       Pointer to I2C device private data
+ *
+ * This function handles the data interrupt and transfer complete interrupt of
+ * the I2C device in slave role.
+ *
+ * Return: IRQ_HANDLED always
+ */
+static irqreturn_t cdns_i2c_slave_isr(void *ptr)
+{
+	struct cdns_i2c *id = ptr;
+	unsigned int isr_status, i2c_status;
+
+	/* Fetch the interrupt status */
+	isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+	cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
+
+	/* Ignore masked interrupts */
+	isr_status &= ~cdns_i2c_readreg(CDNS_I2C_IMR_OFFSET);
+
+	/* Fetch transfer mode (send/receive) */
+	i2c_status = cdns_i2c_readreg(CDNS_I2C_SR_OFFSET);
+
+	/* Handle data send/receive */
+	if (i2c_status & CDNS_I2C_SR_RXRW) {
+		/* Send data to master */
+		if (isr_status & CDNS_I2C_IXR_DATA)
+			cdns_i2c_slave_send_data(id);
+
+		if (isr_status & CDNS_I2C_IXR_COMP) {
+			id->slave_state = CDNS_I2C_SLAVE_STATE_IDLE;
+			i2c_slave_event(id->slave, I2C_SLAVE_STOP, NULL);
+		}
+	} else {
+		/* Receive data from master */
+		if (isr_status & CDNS_I2C_IXR_DATA)
+			cdns_i2c_slave_rcv_data(id);
+
+		if (isr_status & CDNS_I2C_IXR_COMP) {
+			cdns_i2c_slave_rcv_data(id);
+			id->slave_state = CDNS_I2C_SLAVE_STATE_IDLE;
+			i2c_slave_event(id->slave, I2C_SLAVE_STOP, NULL);
+		}
+	}
+
+	/* Master indicated xfer stop or fifo underflow/overflow */
+	if (isr_status & (CDNS_I2C_IXR_NACK | CDNS_I2C_IXR_RX_OVF |
+			  CDNS_I2C_IXR_RX_UNF | CDNS_I2C_IXR_TX_OVF)) {
+		id->slave_state = CDNS_I2C_SLAVE_STATE_IDLE;
+		i2c_slave_event(id->slave, I2C_SLAVE_STOP, NULL);
+		cdns_i2c_writereg(CDNS_I2C_CR_CLR_FIFO, CDNS_I2C_CR_OFFSET);
+	}
+
+	return IRQ_HANDLED;
+}
+#endif
+
+/**
+ * cdns_i2c_master_isr - Interrupt handler for the I2C device in master role
+ * @ptr:       Pointer to I2C device private data
  *
  * This function handles the data interrupt, transfer complete interrupt and
- * the error interrupts of the I2C device.
+ * the error interrupts of the I2C device in master role.
  *
  * Return: IRQ_HANDLED always
  */
-static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
+static irqreturn_t cdns_i2c_master_isr(void *ptr)
 {
 	unsigned int isr_status, avail_bytes, updatetx;
 	unsigned int bytes_to_send;
@@ -358,6 +549,27 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
 }
 
 /**
+ * cdns_i2c_isr - Interrupt handler for the I2C device
+ * @irq:	irq number for the I2C device
+ * @ptr:	void pointer to cdns_i2c structure
+ *
+ * This function passes the control to slave/master based on current role of
+ * i2c controller.
+ *
+ * Return: IRQ_HANDLED always
+ */
+static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
+{
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	struct cdns_i2c *id = ptr;
+
+	if (id->dev_mode == CDNS_I2C_MODE_SLAVE)
+		return cdns_i2c_slave_isr(ptr);
+#endif
+	return cdns_i2c_master_isr(ptr);
+}
+
+/**
  * cdns_i2c_mrecv - Prepare and start a master receive operation
  * @id:		pointer to the i2c device structure
  */
@@ -577,10 +789,28 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	u32 reg;
 	struct cdns_i2c *id = adap->algo_data;
 	bool hold_quirk;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	bool change_role = false;
+#endif
 
 	ret = pm_runtime_get_sync(id->dev);
 	if (ret < 0)
 		return ret;
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	/* Check i2c operating mode and switch if possible */
+	if (id->dev_mode == CDNS_I2C_MODE_SLAVE) {
+		if (id->slave_state != CDNS_I2C_SLAVE_STATE_IDLE)
+			return -EAGAIN;
+
+		/* Set mode to master */
+		cdns_i2c_set_mode(CDNS_I2C_MODE_MASTER, id);
+
+		/* Mark flag to change role once xfer is completed */
+		change_role = true;
+	}
+#endif
+
 	/* Check if the bus is free */
 	if (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) & CDNS_I2C_SR_BA) {
 		ret = -EAGAIN;
@@ -639,7 +869,15 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	}
 
 	ret = num;
+
 out:
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	/* Switch i2c mode to slave */
+	if (change_role)
+		cdns_i2c_set_mode(CDNS_I2C_MODE_SLAVE, id);
+#endif
+
 	pm_runtime_mark_last_busy(id->dev);
 	pm_runtime_put_autosuspend(id->dev);
 	return ret;
@@ -653,14 +891,67 @@ out:
  */
 static u32 cdns_i2c_func(struct i2c_adapter *adap)
 {
-	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
-		(I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
-		I2C_FUNC_SMBUS_BLOCK_DATA;
+	u32 func = I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
+			(I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+			I2C_FUNC_SMBUS_BLOCK_DATA;
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	func |= I2C_FUNC_SLAVE;
+#endif
+
+	return func;
 }
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static int cdns_reg_slave(struct i2c_client *slave)
+{
+	int ret;
+	struct cdns_i2c *id = container_of(slave->adapter, struct cdns_i2c,
+									adap);
+
+	if (id->slave)
+		return -EBUSY;
+
+	if (slave->flags & I2C_CLIENT_TEN)
+		return -EAFNOSUPPORT;
+
+	ret = pm_runtime_get_sync(id->dev);
+	if (ret < 0)
+		return ret;
+
+	/* Store slave information */
+	id->slave = slave;
+
+	/* Enable I2C slave */
+	cdns_i2c_set_mode(CDNS_I2C_MODE_SLAVE, id);
+
+	return 0;
+}
+
+static int cdns_unreg_slave(struct i2c_client *slave)
+{
+	struct cdns_i2c *id = container_of(slave->adapter, struct cdns_i2c,
+									adap);
+
+	pm_runtime_put(id->dev);
+
+	/* Remove slave information */
+	id->slave = NULL;
+
+	/* Enable I2C master */
+	cdns_i2c_set_mode(CDNS_I2C_MODE_MASTER, id);
+
+	return 0;
+}
+#endif
+
 static const struct i2c_algorithm cdns_i2c_algo = {
 	.master_xfer	= cdns_i2c_master_xfer,
 	.functionality	= cdns_i2c_func,
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	.reg_slave	= cdns_reg_slave,
+	.unreg_slave	= cdns_unreg_slave,
+#endif
 };
 
 /**
@@ -755,7 +1046,10 @@ static int cdns_i2c_setclk(unsigned long clk_in, struct cdns_i2c *id)
 	ctrl_reg |= ((div_a << CDNS_I2C_CR_DIVA_SHIFT) |
 			(div_b << CDNS_I2C_CR_DIVB_SHIFT));
 	cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
-
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	id->ctrl_reg_diva_divb = ctrl_reg & (CDNS_I2C_CR_DIVA_MASK |
+				 CDNS_I2C_CR_DIVB_MASK);
+#endif
 	return 0;
 }
 
@@ -906,8 +1200,7 @@ static int cdns_i2c_probe(struct platform_device *pdev)
 		id->quirks = data->quirks;
 	}
 
-	r_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	id->membase = devm_ioremap_resource(&pdev->dev, r_mem);
+	id->membase = devm_platform_get_and_ioremap_resource(pdev, 0, &r_mem);
 	if (IS_ERR(id->membase))
 		return PTR_ERR(id->membase);
 
@@ -949,8 +1242,12 @@ static int cdns_i2c_probe(struct platform_device *pdev)
 	if (ret || (id->i2c_clk > I2C_MAX_FAST_MODE_FREQ))
 		id->i2c_clk = I2C_MAX_STANDARD_MODE_FREQ;
 
-	cdns_i2c_writereg(CDNS_I2C_CR_ACK_EN | CDNS_I2C_CR_NEA | CDNS_I2C_CR_MS,
-			  CDNS_I2C_CR_OFFSET);
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	/* Set initial mode to master */
+	id->dev_mode = CDNS_I2C_MODE_MASTER;
+	id->slave_state = CDNS_I2C_SLAVE_STATE_IDLE;
+#endif
+	cdns_i2c_writereg(CDNS_I2C_CR_MASTER_EN_MASK, CDNS_I2C_CR_OFFSET);
 
 	ret = cdns_i2c_setclk(id->input_clk, id);
 	if (ret) {
diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c
index 35e55feda763..f80d79e973cd 100644
--- a/drivers/i2c/busses/i2c-cht-wc.c
+++ b/drivers/i2c/busses/i2c-cht-wc.c
@@ -314,10 +314,8 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
 	int ret, reg, irq;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "Error missing irq resource\n");
-		return -EINVAL;
-	}
+	if (irq < 0)
+		return irq;
 
 	adap = devm_kzalloc(&pdev->dev, sizeof(*adap), GFP_KERNEL);
 	if (!adap)
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index e3ceb256a380..232a7679b69b 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -761,7 +761,6 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 {
 	struct davinci_i2c_dev *dev;
 	struct i2c_adapter *adap;
-	struct resource *mem;
 	struct i2c_bus_recovery_info *rinfo;
 	int r, irq;
 
@@ -814,8 +813,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	if (IS_ERR(dev->clk))
 		return PTR_ERR(dev->clk);
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dev->base = devm_ioremap_resource(&pdev->dev, mem);
+	dev->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(dev->base)) {
 		return PTR_ERR(dev->base);
 	}
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index c70c6fc09ee3..e3a8640db7da 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -8,17 +8,22 @@
  * Copyright (C) 2007 MontaVista Software Inc.
  * Copyright (C) 2009 Provigent Ltd.
  */
+#include <linux/acpi.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/export.h>
-#include <linux/errno.h>
+#include <linux/device.h>
 #include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/export.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pm_runtime.h>
+#include <linux/regmap.h>
 #include <linux/swab.h>
+#include <linux/types.h>
 
 #include "i2c-designware-core.h"
 
@@ -53,69 +58,267 @@ static char *abort_sources[] = {
 		"incorrect slave-transmitter mode configuration",
 };
 
-u32 dw_readl(struct dw_i2c_dev *dev, int offset)
+static int dw_reg_read(void *context, unsigned int reg, unsigned int *val)
 {
-	u32 value;
+	struct dw_i2c_dev *dev = context;
 
-	if (dev->flags & ACCESS_16BIT)
-		value = readw_relaxed(dev->base + offset) |
-			(readw_relaxed(dev->base + offset + 2) << 16);
-	else
-		value = readl_relaxed(dev->base + offset);
+	*val = readl_relaxed(dev->base + reg);
 
-	if (dev->flags & ACCESS_SWAP)
-		return swab32(value);
-	else
-		return value;
+	return 0;
 }
 
-void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
+static int dw_reg_write(void *context, unsigned int reg, unsigned int val)
 {
-	if (dev->flags & ACCESS_SWAP)
-		b = swab32(b);
-
-	if (dev->flags & ACCESS_16BIT) {
-		writew_relaxed((u16)b, dev->base + offset);
-		writew_relaxed((u16)(b >> 16), dev->base + offset + 2);
-	} else {
-		writel_relaxed(b, dev->base + offset);
-	}
+	struct dw_i2c_dev *dev = context;
+
+	writel_relaxed(val, dev->base + reg);
+
+	return 0;
+}
+
+static int dw_reg_read_swab(void *context, unsigned int reg, unsigned int *val)
+{
+	struct dw_i2c_dev *dev = context;
+
+	*val = swab32(readl_relaxed(dev->base + reg));
+
+	return 0;
+}
+
+static int dw_reg_write_swab(void *context, unsigned int reg, unsigned int val)
+{
+	struct dw_i2c_dev *dev = context;
+
+	writel_relaxed(swab32(val), dev->base + reg);
+
+	return 0;
+}
+
+static int dw_reg_read_word(void *context, unsigned int reg, unsigned int *val)
+{
+	struct dw_i2c_dev *dev = context;
+
+	*val = readw_relaxed(dev->base + reg) |
+		(readw_relaxed(dev->base + reg + 2) << 16);
+
+	return 0;
+}
+
+static int dw_reg_write_word(void *context, unsigned int reg, unsigned int val)
+{
+	struct dw_i2c_dev *dev = context;
+
+	writew_relaxed(val, dev->base + reg);
+	writew_relaxed(val >> 16, dev->base + reg + 2);
+
+	return 0;
 }
 
 /**
- * i2c_dw_set_reg_access() - Set register access flags
+ * i2c_dw_init_regmap() - Initialize registers map
  * @dev: device private data
  *
- * Autodetects needed register access mode and sets access flags accordingly.
- * This must be called before doing any other register access.
+ * Autodetects needed register access mode and creates the regmap with
+ * corresponding read/write callbacks. This must be called before doing any
+ * other register access.
  */
-int i2c_dw_set_reg_access(struct dw_i2c_dev *dev)
+int i2c_dw_init_regmap(struct dw_i2c_dev *dev)
 {
+	struct regmap_config map_cfg = {
+		.reg_bits = 32,
+		.val_bits = 32,
+		.reg_stride = 4,
+		.disable_locking = true,
+		.reg_read = dw_reg_read,
+		.reg_write = dw_reg_write,
+		.max_register = DW_IC_COMP_TYPE,
+	};
 	u32 reg;
 	int ret;
 
+	/*
+	 * Skip detecting the registers map configuration if the regmap has
+	 * already been provided by a higher code.
+	 */
+	if (dev->map)
+		return 0;
+
 	ret = i2c_dw_acquire_lock(dev);
 	if (ret)
 		return ret;
 
-	reg = dw_readl(dev, DW_IC_COMP_TYPE);
+	reg = readl(dev->base + DW_IC_COMP_TYPE);
 	i2c_dw_release_lock(dev);
 
 	if (reg == swab32(DW_IC_COMP_TYPE_VALUE)) {
-		/* Configure register endianness access */
-		dev->flags |= ACCESS_SWAP;
+		map_cfg.reg_read = dw_reg_read_swab;
+		map_cfg.reg_write = dw_reg_write_swab;
 	} else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
-		/* Configure register access mode 16bit */
-		dev->flags |= ACCESS_16BIT;
+		map_cfg.reg_read = dw_reg_read_word;
+		map_cfg.reg_write = dw_reg_write_word;
 	} else if (reg != DW_IC_COMP_TYPE_VALUE) {
 		dev_err(dev->dev,
 			"Unknown Synopsys component type: 0x%08x\n", reg);
 		return -ENODEV;
 	}
 
+	/*
+	 * Note we'll check the return value of the regmap IO accessors only
+	 * at the probe stage. The rest of the code won't do this because
+	 * basically we have MMIO-based regmap so non of the read/write methods
+	 * can fail.
+	 */
+	dev->map = devm_regmap_init(dev->dev, NULL, dev, &map_cfg);
+	if (IS_ERR(dev->map)) {
+		dev_err(dev->dev, "Failed to init the registers map\n");
+		return PTR_ERR(dev->map);
+	}
+
 	return 0;
 }
 
+static const u32 supported_speeds[] = {
+	I2C_MAX_HIGH_SPEED_MODE_FREQ,
+	I2C_MAX_FAST_MODE_PLUS_FREQ,
+	I2C_MAX_FAST_MODE_FREQ,
+	I2C_MAX_STANDARD_MODE_FREQ,
+};
+
+int i2c_dw_validate_speed(struct dw_i2c_dev *dev)
+{
+	struct i2c_timings *t = &dev->timings;
+	unsigned int i;
+
+	/*
+	 * Only standard mode at 100kHz, fast mode at 400kHz,
+	 * fast mode plus at 1MHz and high speed mode at 3.4MHz are supported.
+	 */
+	for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
+		if (t->bus_freq_hz == supported_speeds[i])
+			return 0;
+	}
+
+	dev_err(dev->dev,
+		"%d Hz is unsupported, only 100kHz, 400kHz, 1MHz and 3.4MHz are supported\n",
+		t->bus_freq_hz);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(i2c_dw_validate_speed);
+
+#ifdef CONFIG_ACPI
+
+#include <linux/dmi.h>
+
+/*
+ * The HCNT/LCNT information coming from ACPI should be the most accurate
+ * for given platform. However, some systems get it wrong. On such systems
+ * we get better results by calculating those based on the input clock.
+ */
+static const struct dmi_system_id i2c_dw_no_acpi_params[] = {
+	{
+		.ident = "Dell Inspiron 7348",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7348"),
+		},
+	},
+	{}
+};
+
+static void i2c_dw_acpi_params(struct device *device, char method[],
+			       u16 *hcnt, u16 *lcnt, u32 *sda_hold)
+{
+	struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
+	acpi_handle handle = ACPI_HANDLE(device);
+	union acpi_object *obj;
+
+	if (dmi_check_system(i2c_dw_no_acpi_params))
+		return;
+
+	if (ACPI_FAILURE(acpi_evaluate_object(handle, method, NULL, &buf)))
+		return;
+
+	obj = (union acpi_object *)buf.pointer;
+	if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 3) {
+		const union acpi_object *objs = obj->package.elements;
+
+		*hcnt = (u16)objs[0].integer.value;
+		*lcnt = (u16)objs[1].integer.value;
+		*sda_hold = (u32)objs[2].integer.value;
+	}
+
+	kfree(buf.pointer);
+}
+
+int i2c_dw_acpi_configure(struct device *device)
+{
+	struct dw_i2c_dev *dev = dev_get_drvdata(device);
+	struct i2c_timings *t = &dev->timings;
+	u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
+
+	/*
+	 * Try to get SDA hold time and *CNT values from an ACPI method for
+	 * selected speed modes.
+	 */
+	i2c_dw_acpi_params(device, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, &ss_ht);
+	i2c_dw_acpi_params(device, "FPCN", &dev->fp_hcnt, &dev->fp_lcnt, &fp_ht);
+	i2c_dw_acpi_params(device, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, &hs_ht);
+	i2c_dw_acpi_params(device, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
+
+	switch (t->bus_freq_hz) {
+	case I2C_MAX_STANDARD_MODE_FREQ:
+		dev->sda_hold_time = ss_ht;
+		break;
+	case I2C_MAX_FAST_MODE_PLUS_FREQ:
+		dev->sda_hold_time = fp_ht;
+		break;
+	case I2C_MAX_HIGH_SPEED_MODE_FREQ:
+		dev->sda_hold_time = hs_ht;
+		break;
+	case I2C_MAX_FAST_MODE_FREQ:
+	default:
+		dev->sda_hold_time = fs_ht;
+		break;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i2c_dw_acpi_configure);
+
+void i2c_dw_acpi_adjust_bus_speed(struct device *device)
+{
+	struct dw_i2c_dev *dev = dev_get_drvdata(device);
+	struct i2c_timings *t = &dev->timings;
+	u32 acpi_speed;
+	int i;
+
+	acpi_speed = i2c_acpi_find_bus_speed(device);
+	/*
+	 * Some DSTDs use a non standard speed, round down to the lowest
+	 * standard speed.
+	 */
+	for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
+		if (acpi_speed >= supported_speeds[i])
+			break;
+	}
+	acpi_speed = i < ARRAY_SIZE(supported_speeds) ? supported_speeds[i] : 0;
+
+	/*
+	 * Find bus speed from the "clock-frequency" device property, ACPI
+	 * or by using fast mode if neither is set.
+	 */
+	if (acpi_speed && t->bus_freq_hz)
+		t->bus_freq_hz = min(t->bus_freq_hz, acpi_speed);
+	else if (acpi_speed || t->bus_freq_hz)
+		t->bus_freq_hz = max(t->bus_freq_hz, acpi_speed);
+	else
+		t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
+}
+EXPORT_SYMBOL_GPL(i2c_dw_acpi_adjust_bus_speed);
+
+#endif	/* CONFIG_ACPI */
+
 u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
 {
 	/*
@@ -181,11 +384,17 @@ int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev)
 		return ret;
 
 	/* Configure SDA Hold Time if required */
-	reg = dw_readl(dev, DW_IC_COMP_VERSION);
+	ret = regmap_read(dev->map, DW_IC_COMP_VERSION, &reg);
+	if (ret)
+		goto err_release_lock;
+
 	if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
 		if (!dev->sda_hold_time) {
 			/* Keep previous hold time setting if no one set it */
-			dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
+			ret = regmap_read(dev->map, DW_IC_SDA_HOLD,
+					  &dev->sda_hold_time);
+			if (ret)
+				goto err_release_lock;
 		}
 
 		/*
@@ -209,14 +418,16 @@ int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev)
 		dev->sda_hold_time = 0;
 	}
 
+err_release_lock:
 	i2c_dw_release_lock(dev);
 
-	return 0;
+	return ret;
 }
 
 void __i2c_dw_disable(struct dw_i2c_dev *dev)
 {
 	int timeout = 100;
+	u32 status;
 
 	do {
 		__i2c_dw_disable_nowait(dev);
@@ -224,7 +435,8 @@ void __i2c_dw_disable(struct dw_i2c_dev *dev)
 		 * The enable status register may be unimplemented, but
 		 * in that case this test reads zero and exits the loop.
 		 */
-		if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == 0)
+		regmap_read(dev->map, DW_IC_ENABLE_STATUS, &status);
+		if ((status & 1) == 0)
 			return;
 
 		/*
@@ -303,22 +515,23 @@ void i2c_dw_release_lock(struct dw_i2c_dev *dev)
  */
 int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
 {
-	int timeout = TIMEOUT;
+	u32 status;
+	int ret;
 
-	while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
-		if (timeout <= 0) {
-			dev_warn(dev->dev, "timeout waiting for bus ready\n");
-			i2c_recover_bus(&dev->adapter);
+	ret = regmap_read_poll_timeout(dev->map, DW_IC_STATUS, status,
+				       !(status & DW_IC_STATUS_ACTIVITY),
+				       1100, 20000);
+	if (ret) {
+		dev_warn(dev->dev, "timeout waiting for bus ready\n");
 
-			if (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY)
-				return -ETIMEDOUT;
-			return 0;
-		}
-		timeout--;
-		usleep_range(1000, 1100);
+		i2c_recover_bus(&dev->adapter);
+
+		regmap_read(dev->map, DW_IC_STATUS, &status);
+		if (!(status & DW_IC_STATUS_ACTIVITY))
+			ret = 0;
 	}
 
-	return 0;
+	return ret;
 }
 
 int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
@@ -344,15 +557,19 @@ int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
 		return -EIO;
 }
 
-void i2c_dw_set_fifo_size(struct dw_i2c_dev *dev)
+int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev)
 {
 	u32 param, tx_fifo_depth, rx_fifo_depth;
+	int ret;
 
 	/*
 	 * Try to detect the FIFO depth if not set by interface driver,
 	 * the depth could be from 2 to 256 from HW spec.
 	 */
-	param = dw_readl(dev, DW_IC_COMP_PARAM_1);
+	ret = regmap_read(dev->map, DW_IC_COMP_PARAM_1, &param);
+	if (ret)
+		return ret;
+
 	tx_fifo_depth = ((param >> 16) & 0xff) + 1;
 	rx_fifo_depth = ((param >> 8)  & 0xff) + 1;
 	if (!dev->tx_fifo_depth) {
@@ -364,6 +581,8 @@ void i2c_dw_set_fifo_size(struct dw_i2c_dev *dev)
 		dev->rx_fifo_depth = min_t(u32, dev->rx_fifo_depth,
 				rx_fifo_depth);
 	}
+
+	return 0;
 }
 
 u32 i2c_dw_func(struct i2c_adapter *adap)
@@ -375,17 +594,19 @@ u32 i2c_dw_func(struct i2c_adapter *adap)
 
 void i2c_dw_disable(struct dw_i2c_dev *dev)
 {
+	u32 dummy;
+
 	/* Disable controller */
 	__i2c_dw_disable(dev);
 
 	/* Disable all interrupts */
-	dw_writel(dev, 0, DW_IC_INTR_MASK);
-	dw_readl(dev, DW_IC_CLR_INTR);
+	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
+	regmap_read(dev->map, DW_IC_CLR_INTR, &dummy);
 }
 
 void i2c_dw_disable_int(struct dw_i2c_dev *dev)
 {
-	dw_writel(dev, 0, DW_IC_INTR_MASK);
+	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
 }
 
 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core");
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index b220ad64c38d..556673a1f61b 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -9,7 +9,14 @@
  * Copyright (C) 2009 Provigent Ltd.
  */
 
+#include <linux/bits.h>
+#include <linux/compiler_types.h>
+#include <linux/completion.h>
+#include <linux/dev_printk.h>
+#include <linux/errno.h>
 #include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
 
 #define DW_IC_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C |			\
 					I2C_FUNC_SMBUS_BYTE |		\
@@ -120,8 +127,6 @@
 #define STATUS_WRITE_IN_PROGRESS	0x1
 #define STATUS_READ_IN_PROGRESS		0x2
 
-#define TIMEOUT			20 /* ms */
-
 /*
  * operation modes
  */
@@ -170,11 +175,17 @@
 					 DW_IC_TX_ABRT_TXDATA_NOACK | \
 					 DW_IC_TX_ABRT_GCALL_NOACK)
 
+struct clk;
+struct device;
+struct reset_control;
 
 /**
  * struct dw_i2c_dev - private i2c-designware data
  * @dev: driver model device node
+ * @map: IO registers map
+ * @sysmap: System controller registers map
  * @base: IO registers pointer
+ * @ext: Extended IO registers pointer
  * @cmd_complete: tx completion indicator
  * @clk: input reference clock
  * @pclk: clock required to access the registers
@@ -224,6 +235,8 @@
  */
 struct dw_i2c_dev {
 	struct device		*dev;
+	struct regmap		*map;
+	struct regmap		*sysmap;
 	void __iomem		*base;
 	void __iomem		*ext;
 	struct completion	cmd_complete;
@@ -232,7 +245,6 @@ struct dw_i2c_dev {
 	struct reset_control	*rst;
 	struct i2c_client		*slave;
 	u32			(*get_clk_rate_khz) (struct dw_i2c_dev *dev);
-	struct dw_pci_controller *controller;
 	int			cmd_err;
 	struct i2c_msg		*msgs;
 	int			msgs_num;
@@ -276,18 +288,14 @@ struct dw_i2c_dev {
 	bool			suspended;
 };
 
-#define ACCESS_SWAP		0x00000001
-#define ACCESS_16BIT		0x00000002
-#define ACCESS_INTR_MASK	0x00000004
-#define ACCESS_NO_IRQ_SUSPEND	0x00000008
+#define ACCESS_INTR_MASK	0x00000001
+#define ACCESS_NO_IRQ_SUSPEND	0x00000002
 
-#define MODEL_CHERRYTRAIL	0x00000100
-#define MODEL_MSCC_OCELOT	0x00000200
+#define MODEL_MSCC_OCELOT	0x00000100
+#define MODEL_BAIKAL_BT1	0x00000200
 #define MODEL_MASK		0x00000f00
 
-u32 dw_readl(struct dw_i2c_dev *dev, int offset);
-void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
-int i2c_dw_set_reg_access(struct dw_i2c_dev *dev);
+int i2c_dw_init_regmap(struct dw_i2c_dev *dev);
 u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset);
 u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
 int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev);
@@ -297,32 +305,67 @@ int i2c_dw_acquire_lock(struct dw_i2c_dev *dev);
 void i2c_dw_release_lock(struct dw_i2c_dev *dev);
 int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev);
 int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev);
-void i2c_dw_set_fifo_size(struct dw_i2c_dev *dev);
+int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev);
 u32 i2c_dw_func(struct i2c_adapter *adap);
 void i2c_dw_disable(struct dw_i2c_dev *dev);
 void i2c_dw_disable_int(struct dw_i2c_dev *dev);
 
 static inline void __i2c_dw_enable(struct dw_i2c_dev *dev)
 {
-	dw_writel(dev, 1, DW_IC_ENABLE);
+	regmap_write(dev->map, DW_IC_ENABLE, 1);
 }
 
 static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev)
 {
-	dw_writel(dev, 0, DW_IC_ENABLE);
+	regmap_write(dev->map, DW_IC_ENABLE, 0);
 }
 
 void __i2c_dw_disable(struct dw_i2c_dev *dev);
 
-extern int i2c_dw_probe(struct dw_i2c_dev *dev);
+extern void i2c_dw_configure_master(struct dw_i2c_dev *dev);
+extern int i2c_dw_probe_master(struct dw_i2c_dev *dev);
+
 #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_SLAVE)
+extern void i2c_dw_configure_slave(struct dw_i2c_dev *dev);
 extern int i2c_dw_probe_slave(struct dw_i2c_dev *dev);
 #else
+static inline void i2c_dw_configure_slave(struct dw_i2c_dev *dev) { }
 static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; }
 #endif
 
+static inline int i2c_dw_probe(struct dw_i2c_dev *dev)
+{
+	switch (dev->mode) {
+	case DW_IC_SLAVE:
+		return i2c_dw_probe_slave(dev);
+	case DW_IC_MASTER:
+		return i2c_dw_probe_master(dev);
+	default:
+		dev_err(dev->dev, "Wrong operation mode: %d\n", dev->mode);
+		return -EINVAL;
+	}
+}
+
+static inline void i2c_dw_configure(struct dw_i2c_dev *dev)
+{
+	if (i2c_detect_slave_mode(dev->dev))
+		i2c_dw_configure_slave(dev);
+	else
+		i2c_dw_configure_master(dev);
+}
+
 #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
 extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev);
 #else
 static inline int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) { return 0; }
 #endif
+
+int i2c_dw_validate_speed(struct dw_i2c_dev *dev);
+
+#if IS_ENABLED(CONFIG_ACPI)
+int i2c_dw_acpi_configure(struct device *device);
+void i2c_dw_acpi_adjust_bus_speed(struct device *device);
+#else
+static inline int i2c_dw_acpi_configure(struct device *device) { return -ENODEV; }
+static inline void i2c_dw_acpi_adjust_bus_speed(struct device *device) {}
+#endif
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 3a58eef20936..d6425ad6e6a3 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -18,6 +18,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/pm_runtime.h>
+#include <linux/regmap.h>
 #include <linux/reset.h>
 
 #include "i2c-designware-core.h"
@@ -25,11 +26,11 @@
 static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev)
 {
 	/* Configure Tx/Rx FIFO threshold levels */
-	dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL);
-	dw_writel(dev, 0, DW_IC_RX_TL);
+	regmap_write(dev->map, DW_IC_TX_TL, dev->tx_fifo_depth / 2);
+	regmap_write(dev->map, DW_IC_RX_TL, 0);
 
 	/* Configure the I2C master */
-	dw_writel(dev, dev->master_cfg, DW_IC_CON);
+	regmap_write(dev->map, DW_IC_CON, dev->master_cfg);
 }
 
 static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
@@ -44,8 +45,11 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
 	ret = i2c_dw_acquire_lock(dev);
 	if (ret)
 		return ret;
-	comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
+
+	ret = regmap_read(dev->map, DW_IC_COMP_PARAM_1, &comp_param1);
 	i2c_dw_release_lock(dev);
+	if (ret)
+		return ret;
 
 	/* Set standard and fast speed dividers for high/low periods */
 	sda_falling_time = t->sda_fall_ns ?: 300; /* ns */
@@ -76,14 +80,27 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
 	 */
 	if (t->bus_freq_hz == 1000000) {
 		/*
-		 * Check are fast mode plus parameters available and use
-		 * fast mode if not.
+		 * Check are Fast Mode Plus parameters available. Calculate
+		 * SCL timing parameters for Fast Mode Plus if not set.
 		 */
 		if (dev->fp_hcnt && dev->fp_lcnt) {
 			dev->fs_hcnt = dev->fp_hcnt;
 			dev->fs_lcnt = dev->fp_lcnt;
-			fp_str = " Plus";
+		} else {
+			ic_clk = i2c_dw_clk_rate(dev);
+			dev->fs_hcnt =
+				i2c_dw_scl_hcnt(ic_clk,
+						260,	/* tHIGH = 260 ns */
+						sda_falling_time,
+						0,	/* DW default */
+						0);	/* No offset */
+			dev->fs_lcnt =
+				i2c_dw_scl_lcnt(ic_clk,
+						500,	/* tLOW = 500 ns */
+						scl_falling_time,
+						0);	/* No offset */
 		}
+		fp_str = " Plus";
 	}
 	/*
 	 * Calculate SCL timing parameters for fast mode if not set. They are
@@ -116,10 +133,22 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
 			dev->master_cfg |= DW_IC_CON_SPEED_FAST;
 			dev->hs_hcnt = 0;
 			dev->hs_lcnt = 0;
-		} else if (dev->hs_hcnt && dev->hs_lcnt) {
-			dev_dbg(dev->dev, "High Speed Mode HCNT:LCNT = %d:%d\n",
-				dev->hs_hcnt, dev->hs_lcnt);
+		} else if (!dev->hs_hcnt || !dev->hs_lcnt) {
+			ic_clk = i2c_dw_clk_rate(dev);
+			dev->hs_hcnt =
+				i2c_dw_scl_hcnt(ic_clk,
+						160,	/* tHIGH = 160 ns */
+						sda_falling_time,
+						0,	/* DW default */
+						0);	/* No offset */
+			dev->hs_lcnt =
+				i2c_dw_scl_lcnt(ic_clk,
+						320,	/* tLOW = 320 ns */
+						scl_falling_time,
+						0);	/* No offset */
 		}
+		dev_dbg(dev->dev, "High Speed Mode HCNT:LCNT = %d:%d\n",
+			dev->hs_hcnt, dev->hs_lcnt);
 	}
 
 	ret = i2c_dw_set_sda_hold(dev);
@@ -162,22 +191,22 @@ static int i2c_dw_init_master(struct dw_i2c_dev *dev)
 	__i2c_dw_disable(dev);
 
 	/* Write standard speed timing parameters */
-	dw_writel(dev, dev->ss_hcnt, DW_IC_SS_SCL_HCNT);
-	dw_writel(dev, dev->ss_lcnt, DW_IC_SS_SCL_LCNT);
+	regmap_write(dev->map, DW_IC_SS_SCL_HCNT, dev->ss_hcnt);
+	regmap_write(dev->map, DW_IC_SS_SCL_LCNT, dev->ss_lcnt);
 
 	/* Write fast mode/fast mode plus timing parameters */
-	dw_writel(dev, dev->fs_hcnt, DW_IC_FS_SCL_HCNT);
-	dw_writel(dev, dev->fs_lcnt, DW_IC_FS_SCL_LCNT);
+	regmap_write(dev->map, DW_IC_FS_SCL_HCNT, dev->fs_hcnt);
+	regmap_write(dev->map, DW_IC_FS_SCL_LCNT, dev->fs_lcnt);
 
 	/* Write high speed timing parameters if supported */
 	if (dev->hs_hcnt && dev->hs_lcnt) {
-		dw_writel(dev, dev->hs_hcnt, DW_IC_HS_SCL_HCNT);
-		dw_writel(dev, dev->hs_lcnt, DW_IC_HS_SCL_LCNT);
+		regmap_write(dev->map, DW_IC_HS_SCL_HCNT, dev->hs_hcnt);
+		regmap_write(dev->map, DW_IC_HS_SCL_LCNT, dev->hs_lcnt);
 	}
 
 	/* Write SDA hold time if supported */
 	if (dev->sda_hold_time)
-		dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
+		regmap_write(dev->map, DW_IC_SDA_HOLD, dev->sda_hold_time);
 
 	i2c_dw_configure_fifo_master(dev);
 	i2c_dw_release_lock(dev);
@@ -188,15 +217,15 @@ static int i2c_dw_init_master(struct dw_i2c_dev *dev)
 static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 {
 	struct i2c_msg *msgs = dev->msgs;
-	u32 ic_con, ic_tar = 0;
+	u32 ic_con = 0, ic_tar = 0;
+	u32 dummy;
 
 	/* Disable the adapter */
 	__i2c_dw_disable(dev);
 
 	/* If the slave address is ten bit address, enable 10BITADDR */
-	ic_con = dw_readl(dev, DW_IC_CON);
 	if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
-		ic_con |= DW_IC_CON_10BITADDR_MASTER;
+		ic_con = DW_IC_CON_10BITADDR_MASTER;
 		/*
 		 * If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing
 		 * mode has to be enabled via bit 12 of IC_TAR register.
@@ -204,17 +233,17 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 		 * detected from registers.
 		 */
 		ic_tar = DW_IC_TAR_10BITADDR_MASTER;
-	} else {
-		ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
 	}
 
-	dw_writel(dev, ic_con, DW_IC_CON);
+	regmap_update_bits(dev->map, DW_IC_CON, DW_IC_CON_10BITADDR_MASTER,
+			   ic_con);
 
 	/*
 	 * Set the slave (target) address and enable 10-bit addressing mode
 	 * if applicable.
 	 */
-	dw_writel(dev, msgs[dev->msg_write_idx].addr | ic_tar, DW_IC_TAR);
+	regmap_write(dev->map, DW_IC_TAR,
+		     msgs[dev->msg_write_idx].addr | ic_tar);
 
 	/* Enforce disabled interrupts (due to HW issues) */
 	i2c_dw_disable_int(dev);
@@ -223,11 +252,11 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 	__i2c_dw_enable(dev);
 
 	/* Dummy read to avoid the register getting stuck on Bay Trail */
-	dw_readl(dev, DW_IC_ENABLE_STATUS);
+	regmap_read(dev->map, DW_IC_ENABLE_STATUS, &dummy);
 
 	/* Clear and enable interrupts */
-	dw_readl(dev, DW_IC_CLR_INTR);
-	dw_writel(dev, DW_IC_INTR_MASTER_MASK, DW_IC_INTR_MASK);
+	regmap_read(dev->map, DW_IC_CLR_INTR, &dummy);
+	regmap_write(dev->map, DW_IC_INTR_MASK, DW_IC_INTR_MASTER_MASK);
 }
 
 /*
@@ -246,6 +275,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 	u32 buf_len = dev->tx_buf_len;
 	u8 *buf = dev->tx_buf;
 	bool need_restart = false;
+	unsigned int flr;
 
 	intr_mask = DW_IC_INTR_MASTER_MASK;
 
@@ -278,8 +308,11 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 				need_restart = true;
 		}
 
-		tx_limit = dev->tx_fifo_depth - dw_readl(dev, DW_IC_TXFLR);
-		rx_limit = dev->rx_fifo_depth - dw_readl(dev, DW_IC_RXFLR);
+		regmap_read(dev->map, DW_IC_TXFLR, &flr);
+		tx_limit = dev->tx_fifo_depth - flr;
+
+		regmap_read(dev->map, DW_IC_RXFLR, &flr);
+		rx_limit = dev->rx_fifo_depth - flr;
 
 		while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
 			u32 cmd = 0;
@@ -312,11 +345,14 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 				if (dev->rx_outstanding >= dev->rx_fifo_depth)
 					break;
 
-				dw_writel(dev, cmd | 0x100, DW_IC_DATA_CMD);
+				regmap_write(dev->map, DW_IC_DATA_CMD,
+					     cmd | 0x100);
 				rx_limit--;
 				dev->rx_outstanding++;
-			} else
-				dw_writel(dev, cmd | *buf++, DW_IC_DATA_CMD);
+			} else {
+				regmap_write(dev->map, DW_IC_DATA_CMD,
+					     cmd | *buf++);
+			}
 			tx_limit--; buf_len--;
 		}
 
@@ -346,7 +382,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 	if (dev->msg_err)
 		intr_mask = 0;
 
-	dw_writel(dev, intr_mask,  DW_IC_INTR_MASK);
+	regmap_write(dev->map,  DW_IC_INTR_MASK, intr_mask);
 }
 
 static u8
@@ -371,10 +407,10 @@ static void
 i2c_dw_read(struct dw_i2c_dev *dev)
 {
 	struct i2c_msg *msgs = dev->msgs;
-	int rx_valid;
+	unsigned int rx_valid;
 
 	for (; dev->msg_read_idx < dev->msgs_num; dev->msg_read_idx++) {
-		u32 len;
+		u32 len, tmp;
 		u8 *buf;
 
 		if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
@@ -388,18 +424,18 @@ i2c_dw_read(struct dw_i2c_dev *dev)
 			buf = dev->rx_buf;
 		}
 
-		rx_valid = dw_readl(dev, DW_IC_RXFLR);
+		regmap_read(dev->map, DW_IC_RXFLR, &rx_valid);
 
 		for (; len > 0 && rx_valid > 0; len--, rx_valid--) {
 			u32 flags = msgs[dev->msg_read_idx].flags;
 
-			*buf = dw_readl(dev, DW_IC_DATA_CMD);
+			regmap_read(dev->map, DW_IC_DATA_CMD, &tmp);
 			/* Ensure length byte is a valid value */
 			if (flags & I2C_M_RECV_LEN &&
-				*buf <= I2C_SMBUS_BLOCK_MAX && *buf > 0) {
-				len = i2c_dw_recv_len(dev, *buf);
+			    tmp <= I2C_SMBUS_BLOCK_MAX && tmp > 0) {
+				len = i2c_dw_recv_len(dev, tmp);
 			}
-			buf++;
+			*buf++ = tmp;
 			dev->rx_outstanding--;
 		}
 
@@ -517,7 +553,7 @@ static const struct i2c_adapter_quirks i2c_dw_quirks = {
 
 static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
 {
-	u32 stat;
+	u32 stat, dummy;
 
 	/*
 	 * The IC_INTR_STAT register just indicates "enabled" interrupts.
@@ -525,47 +561,47 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
 	 * in the IC_RAW_INTR_STAT register.
 	 *
 	 * That is,
-	 *   stat = dw_readl(IC_INTR_STAT);
+	 *   stat = readl(IC_INTR_STAT);
 	 * equals to,
-	 *   stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK);
+	 *   stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK);
 	 *
 	 * The raw version might be useful for debugging purposes.
 	 */
-	stat = dw_readl(dev, DW_IC_INTR_STAT);
+	regmap_read(dev->map, DW_IC_INTR_STAT, &stat);
 
 	/*
 	 * Do not use the IC_CLR_INTR register to clear interrupts, or
 	 * you'll miss some interrupts, triggered during the period from
-	 * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR).
+	 * readl(IC_INTR_STAT) to readl(IC_CLR_INTR).
 	 *
 	 * Instead, use the separately-prepared IC_CLR_* registers.
 	 */
 	if (stat & DW_IC_INTR_RX_UNDER)
-		dw_readl(dev, DW_IC_CLR_RX_UNDER);
+		regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &dummy);
 	if (stat & DW_IC_INTR_RX_OVER)
-		dw_readl(dev, DW_IC_CLR_RX_OVER);
+		regmap_read(dev->map, DW_IC_CLR_RX_OVER, &dummy);
 	if (stat & DW_IC_INTR_TX_OVER)
-		dw_readl(dev, DW_IC_CLR_TX_OVER);
+		regmap_read(dev->map, DW_IC_CLR_TX_OVER, &dummy);
 	if (stat & DW_IC_INTR_RD_REQ)
-		dw_readl(dev, DW_IC_CLR_RD_REQ);
+		regmap_read(dev->map, DW_IC_CLR_RD_REQ, &dummy);
 	if (stat & DW_IC_INTR_TX_ABRT) {
 		/*
 		 * The IC_TX_ABRT_SOURCE register is cleared whenever
 		 * the IC_CLR_TX_ABRT is read.  Preserve it beforehand.
 		 */
-		dev->abort_source = dw_readl(dev, DW_IC_TX_ABRT_SOURCE);
-		dw_readl(dev, DW_IC_CLR_TX_ABRT);
+		regmap_read(dev->map, DW_IC_TX_ABRT_SOURCE, &dev->abort_source);
+		regmap_read(dev->map, DW_IC_CLR_TX_ABRT, &dummy);
 	}
 	if (stat & DW_IC_INTR_RX_DONE)
-		dw_readl(dev, DW_IC_CLR_RX_DONE);
+		regmap_read(dev->map, DW_IC_CLR_RX_DONE, &dummy);
 	if (stat & DW_IC_INTR_ACTIVITY)
-		dw_readl(dev, DW_IC_CLR_ACTIVITY);
+		regmap_read(dev->map, DW_IC_CLR_ACTIVITY, &dummy);
 	if (stat & DW_IC_INTR_STOP_DET)
-		dw_readl(dev, DW_IC_CLR_STOP_DET);
+		regmap_read(dev->map, DW_IC_CLR_STOP_DET, &dummy);
 	if (stat & DW_IC_INTR_START_DET)
-		dw_readl(dev, DW_IC_CLR_START_DET);
+		regmap_read(dev->map, DW_IC_CLR_START_DET, &dummy);
 	if (stat & DW_IC_INTR_GEN_CALL)
-		dw_readl(dev, DW_IC_CLR_GEN_CALL);
+		regmap_read(dev->map, DW_IC_CLR_GEN_CALL, &dummy);
 
 	return stat;
 }
@@ -587,7 +623,7 @@ static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
 		 * Anytime TX_ABRT is set, the contents of the tx/rx
 		 * buffers are flushed. Make sure to skip them.
 		 */
-		dw_writel(dev, 0, DW_IC_INTR_MASK);
+		regmap_write(dev->map, DW_IC_INTR_MASK, 0);
 		goto tx_aborted;
 	}
 
@@ -608,9 +644,9 @@ tx_aborted:
 		complete(&dev->cmd_complete);
 	else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
 		/* Workaround to trigger pending interrupt */
-		stat = dw_readl(dev, DW_IC_INTR_MASK);
+		regmap_read(dev->map, DW_IC_INTR_MASK, &stat);
 		i2c_dw_disable_int(dev);
-		dw_writel(dev, stat, DW_IC_INTR_MASK);
+		regmap_write(dev->map, DW_IC_INTR_MASK, stat);
 	}
 
 	return 0;
@@ -621,8 +657,8 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
 	struct dw_i2c_dev *dev = dev_id;
 	u32 stat, enabled;
 
-	enabled = dw_readl(dev, DW_IC_ENABLE);
-	stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
+	regmap_read(dev->map, DW_IC_ENABLE, &enabled);
+	regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat);
 	dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
 	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
 		return IRQ_NONE;
@@ -632,6 +668,30 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+void i2c_dw_configure_master(struct dw_i2c_dev *dev)
+{
+	struct i2c_timings *t = &dev->timings;
+
+	dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
+
+	dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+			  DW_IC_CON_RESTART_EN;
+
+	dev->mode = DW_IC_MASTER;
+
+	switch (t->bus_freq_hz) {
+	case I2C_MAX_STANDARD_MODE_FREQ:
+		dev->master_cfg |= DW_IC_CON_SPEED_STD;
+		break;
+	case I2C_MAX_HIGH_SPEED_MODE_FREQ:
+		dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
+		break;
+	default:
+		dev->master_cfg |= DW_IC_CON_SPEED_FAST;
+	}
+}
+EXPORT_SYMBOL_GPL(i2c_dw_configure_master);
+
 static void i2c_dw_prepare_recovery(struct i2c_adapter *adap)
 {
 	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
@@ -678,7 +738,7 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
 	return 0;
 }
 
-int i2c_dw_probe(struct dw_i2c_dev *dev)
+int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 {
 	struct i2c_adapter *adap = &dev->adapter;
 	unsigned long irq_flags;
@@ -690,7 +750,7 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
 	dev->disable = i2c_dw_disable;
 	dev->disable_int = i2c_dw_disable_int;
 
-	ret = i2c_dw_set_reg_access(dev);
+	ret = i2c_dw_init_regmap(dev);
 	if (ret)
 		return ret;
 
@@ -698,7 +758,9 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
 	if (ret)
 		return ret;
 
-	i2c_dw_set_fifo_size(dev);
+	ret = i2c_dw_set_fifo_size(dev);
+	if (ret)
+		return ret;
 
 	ret = dev->init(dev);
 	if (ret)
@@ -745,7 +807,7 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(i2c_dw_probe);
+EXPORT_SYMBOL_GPL(i2c_dw_probe_master);
 
 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus master adapter");
 MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 7a0b65b5b5b5..947c096f86e3 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -46,20 +46,12 @@ struct dw_scl_sda_cfg {
 
 struct dw_pci_controller {
 	u32 bus_num;
-	u32 bus_cfg;
-	u32 tx_fifo_depth;
-	u32 rx_fifo_depth;
-	u32 clk_khz;
-	u32 functionality;
 	u32 flags;
 	struct dw_scl_sda_cfg *scl_sda_cfg;
 	int (*setup)(struct pci_dev *pdev, struct dw_pci_controller *c);
+	u32 (*get_clk_rate_khz)(struct dw_i2c_dev *dev);
 };
 
-#define INTEL_MID_STD_CFG  (DW_IC_CON_MASTER |			\
-				DW_IC_CON_SLAVE_DISABLE |	\
-				DW_IC_CON_RESTART_EN)
-
 /* Merrifield HCNT/LCNT/SDA hold time */
 static struct dw_scl_sda_cfg mrfld_config = {
 	.ss_hcnt = 0x2f8,
@@ -86,12 +78,18 @@ static struct dw_scl_sda_cfg hsw_config = {
 	.sda_hold = 0x9,
 };
 
+static u32 mfld_get_clk_rate_khz(struct dw_i2c_dev *dev)
+{
+	return 25000;
+}
+
 static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 {
+	struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
+
 	switch (pdev->device) {
 	case 0x0817:
-		c->bus_cfg &= ~DW_IC_CON_SPEED_MASK;
-		c->bus_cfg |= DW_IC_CON_SPEED_STD;
+		dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
 		/* fall through */
 	case 0x0818:
 	case 0x0819:
@@ -125,57 +123,37 @@ static int mrfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 	return -ENODEV;
 }
 
+static u32 ehl_get_clk_rate_khz(struct dw_i2c_dev *dev)
+{
+	return 100000;
+}
+
 static struct dw_pci_controller dw_pci_controllers[] = {
 	[medfield] = {
 		.bus_num = -1,
-		.bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
-		.tx_fifo_depth = 32,
-		.rx_fifo_depth = 32,
-		.functionality = I2C_FUNC_10BIT_ADDR,
-		.clk_khz      = 25000,
 		.setup = mfld_setup,
+		.get_clk_rate_khz = mfld_get_clk_rate_khz,
 	},
 	[merrifield] = {
 		.bus_num = -1,
-		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
-		.tx_fifo_depth = 64,
-		.rx_fifo_depth = 64,
-		.functionality = I2C_FUNC_10BIT_ADDR,
 		.scl_sda_cfg = &mrfld_config,
 		.setup = mrfld_setup,
 	},
 	[baytrail] = {
 		.bus_num = -1,
-		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
-		.tx_fifo_depth = 32,
-		.rx_fifo_depth = 32,
-		.functionality = I2C_FUNC_10BIT_ADDR,
 		.scl_sda_cfg = &byt_config,
 	},
 	[haswell] = {
 		.bus_num = -1,
-		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
-		.tx_fifo_depth = 32,
-		.rx_fifo_depth = 32,
-		.functionality = I2C_FUNC_10BIT_ADDR,
 		.scl_sda_cfg = &hsw_config,
 	},
 	[cherrytrail] = {
 		.bus_num = -1,
-		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
-		.tx_fifo_depth = 32,
-		.rx_fifo_depth = 32,
-		.functionality = I2C_FUNC_10BIT_ADDR,
-		.flags = MODEL_CHERRYTRAIL,
 		.scl_sda_cfg = &byt_config,
 	},
 	[elkhartlake] = {
 		.bus_num = -1,
-		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
-		.tx_fifo_depth = 32,
-		.rx_fifo_depth = 32,
-		.functionality = I2C_FUNC_10BIT_ADDR,
-		.clk_khz = 100000,
+		.get_clk_rate_khz = ehl_get_clk_rate_khz,
 	},
 };
 
@@ -205,11 +183,6 @@ static int i2c_dw_pci_resume(struct device *dev)
 static UNIVERSAL_DEV_PM_OPS(i2c_dw_pm_ops, i2c_dw_pci_suspend,
 			    i2c_dw_pci_resume, NULL);
 
-static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
-{
-	return dev->controller->clk_khz;
-}
-
 static int i2c_dw_pci_probe(struct pci_dev *pdev,
 			    const struct pci_device_id *id)
 {
@@ -250,14 +223,15 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	if (r < 0)
 		return r;
 
-	dev->clk = NULL;
-	dev->controller = controller;
-	dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
+	dev->get_clk_rate_khz = controller->get_clk_rate_khz;
+	dev->timings.bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
 	dev->base = pcim_iomap_table(pdev)[0];
 	dev->dev = &pdev->dev;
 	dev->irq = pci_irq_vector(pdev, 0);
 	dev->flags |= controller->flags;
 
+	pci_set_drvdata(pdev, dev);
+
 	if (controller->setup) {
 		r = controller->setup(pdev, controller);
 		if (r) {
@@ -266,10 +240,19 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 		}
 	}
 
-	dev->functionality = controller->functionality |
-				DW_IC_DEFAULT_FUNCTIONALITY;
+	i2c_dw_acpi_adjust_bus_speed(&pdev->dev);
+
+	if (has_acpi_companion(&pdev->dev))
+		i2c_dw_acpi_configure(&pdev->dev);
+
+	r = i2c_dw_validate_speed(dev);
+	if (r) {
+		pci_free_irq_vectors(pdev);
+		return r;
+	}
+
+	i2c_dw_configure(dev);
 
-	dev->master_cfg = controller->bus_cfg;
 	if (controller->scl_sda_cfg) {
 		cfg = controller->scl_sda_cfg;
 		dev->ss_hcnt = cfg->ss_hcnt;
@@ -279,11 +262,6 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 		dev->sda_hold_time = cfg->sda_hold;
 	}
 
-	pci_set_drvdata(pdev, dev);
-
-	dev->tx_fifo_depth = controller->tx_fifo_depth;
-	dev->rx_fifo_depth = controller->rx_fifo_depth;
-
 	adap = &dev->adapter;
 	adap->owner = THIS_MODULE;
 	adap->class = 0;
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index c429d664f655..0de4e302fc6a 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -12,13 +12,13 @@
 #include <linux/clk-provider.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/dmi.h>
 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_data/i2c-designware.h>
@@ -26,6 +26,7 @@
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
+#include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
@@ -39,91 +40,13 @@ static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
 }
 
 #ifdef CONFIG_ACPI
-/*
- * The HCNT/LCNT information coming from ACPI should be the most accurate
- * for given platform. However, some systems get it wrong. On such systems
- * we get better results by calculating those based on the input clock.
- */
-static const struct dmi_system_id dw_i2c_no_acpi_params[] = {
-	{
-		.ident = "Dell Inspiron 7348",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7348"),
-		},
-	},
-	{ }
-};
-
-static void dw_i2c_acpi_params(struct platform_device *pdev, char method[],
-			       u16 *hcnt, u16 *lcnt, u32 *sda_hold)
-{
-	struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
-	acpi_handle handle = ACPI_HANDLE(&pdev->dev);
-	union acpi_object *obj;
-
-	if (dmi_check_system(dw_i2c_no_acpi_params))
-		return;
-
-	if (ACPI_FAILURE(acpi_evaluate_object(handle, method, NULL, &buf)))
-		return;
-
-	obj = (union acpi_object *)buf.pointer;
-	if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 3) {
-		const union acpi_object *objs = obj->package.elements;
-
-		*hcnt = (u16)objs[0].integer.value;
-		*lcnt = (u16)objs[1].integer.value;
-		*sda_hold = (u32)objs[2].integer.value;
-	}
-
-	kfree(buf.pointer);
-}
-
-static int dw_i2c_acpi_configure(struct platform_device *pdev)
-{
-	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
-	struct i2c_timings *t = &dev->timings;
-	u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
-
-	dev->tx_fifo_depth = 32;
-	dev->rx_fifo_depth = 32;
-
-	/*
-	 * Try to get SDA hold time and *CNT values from an ACPI method for
-	 * selected speed modes.
-	 */
-	dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, &ss_ht);
-	dw_i2c_acpi_params(pdev, "FPCN", &dev->fp_hcnt, &dev->fp_lcnt, &fp_ht);
-	dw_i2c_acpi_params(pdev, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, &hs_ht);
-	dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
-
-	switch (t->bus_freq_hz) {
-	case I2C_MAX_STANDARD_MODE_FREQ:
-		dev->sda_hold_time = ss_ht;
-		break;
-	case I2C_MAX_FAST_MODE_PLUS_FREQ:
-		dev->sda_hold_time = fp_ht;
-		break;
-	case I2C_MAX_HIGH_SPEED_MODE_FREQ:
-		dev->sda_hold_time = hs_ht;
-		break;
-	case I2C_MAX_FAST_MODE_FREQ:
-	default:
-		dev->sda_hold_time = fs_ht;
-		break;
-	}
-
-	return 0;
-}
-
 static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ "INT33C2", 0 },
 	{ "INT33C3", 0 },
 	{ "INT3432", 0 },
 	{ "INT3433", 0 },
 	{ "80860F41", ACCESS_NO_IRQ_SUSPEND },
-	{ "808622C1", ACCESS_NO_IRQ_SUSPEND | MODEL_CHERRYTRAIL },
+	{ "808622C1", ACCESS_NO_IRQ_SUSPEND },
 	{ "AMD0010", ACCESS_INTR_MASK },
 	{ "AMDI0010", ACCESS_INTR_MASK },
 	{ "AMDI0510", 0 },
@@ -134,14 +57,66 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
-#else
-static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
-{
-	return -ENODEV;
-}
 #endif
 
 #ifdef CONFIG_OF
+#define BT1_I2C_CTL			0x100
+#define BT1_I2C_CTL_ADDR_MASK		GENMASK(7, 0)
+#define BT1_I2C_CTL_WR			BIT(8)
+#define BT1_I2C_CTL_GO			BIT(31)
+#define BT1_I2C_DI			0x104
+#define BT1_I2C_DO			0x108
+
+static int bt1_i2c_read(void *context, unsigned int reg, unsigned int *val)
+{
+	struct dw_i2c_dev *dev = context;
+	int ret;
+
+	/*
+	 * Note these methods shouldn't ever fail because the system controller
+	 * registers are memory mapped. We check the return value just in case.
+	 */
+	ret = regmap_write(dev->sysmap, BT1_I2C_CTL,
+			   BT1_I2C_CTL_GO | (reg & BT1_I2C_CTL_ADDR_MASK));
+	if (ret)
+		return ret;
+
+	return regmap_read(dev->sysmap, BT1_I2C_DO, val);
+}
+
+static int bt1_i2c_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct dw_i2c_dev *dev = context;
+	int ret;
+
+	ret = regmap_write(dev->sysmap, BT1_I2C_DI, val);
+	if (ret)
+		return ret;
+
+	return regmap_write(dev->sysmap, BT1_I2C_CTL,
+		BT1_I2C_CTL_GO | BT1_I2C_CTL_WR | (reg & BT1_I2C_CTL_ADDR_MASK));
+}
+
+static struct regmap_config bt1_i2c_cfg = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.fast_io = true,
+	.reg_read = bt1_i2c_read,
+	.reg_write = bt1_i2c_write,
+	.max_register = DW_IC_COMP_TYPE,
+};
+
+static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
+{
+	dev->sysmap = syscon_node_to_regmap(dev->dev->of_node->parent);
+	if (IS_ERR(dev->sysmap))
+		return PTR_ERR(dev->sysmap);
+
+	dev->map = devm_regmap_init(dev->dev, NULL, dev, &bt1_i2c_cfg);
+	return PTR_ERR_OR_ZERO(dev->map);
+}
+
 #define MSCC_ICPU_CFG_TWI_DELAY		0x0
 #define MSCC_ICPU_CFG_TWI_DELAY_ENABLE	BIT(0)
 #define MSCC_ICPU_CFG_TWI_SPIKE_FILTER	0x4
@@ -157,12 +132,10 @@ static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
 static int dw_i2c_of_configure(struct platform_device *pdev)
 {
 	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
-	struct resource *mem;
 
 	switch (dev->flags & MODEL_MASK) {
 	case MODEL_MSCC_OCELOT:
-		mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-		dev->ext = devm_ioremap_resource(&pdev->dev, mem);
+		dev->ext = devm_platform_ioremap_resource(pdev, 1);
 		if (!IS_ERR(dev->ext))
 			dev->set_sda_hold_time = mscc_twi_set_sda_hold_time;
 		break;
@@ -176,48 +149,21 @@ static int dw_i2c_of_configure(struct platform_device *pdev)
 static const struct of_device_id dw_i2c_of_match[] = {
 	{ .compatible = "snps,designware-i2c", },
 	{ .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT },
+	{ .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 },
 	{},
 };
 MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
 #else
-static inline int dw_i2c_of_configure(struct platform_device *pdev)
+static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
 {
 	return -ENODEV;
 }
-#endif
-
-static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
-{
-	struct i2c_timings *t = &dev->timings;
-
-	dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
-
-	dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
-			  DW_IC_CON_RESTART_EN;
-
-	dev->mode = DW_IC_MASTER;
-
-	switch (t->bus_freq_hz) {
-	case I2C_MAX_STANDARD_MODE_FREQ:
-		dev->master_cfg |= DW_IC_CON_SPEED_STD;
-		break;
-	case I2C_MAX_HIGH_SPEED_MODE_FREQ:
-		dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
-		break;
-	default:
-		dev->master_cfg |= DW_IC_CON_SPEED_FAST;
-	}
-}
 
-static void i2c_dw_configure_slave(struct dw_i2c_dev *dev)
+static inline int dw_i2c_of_configure(struct platform_device *pdev)
 {
-	dev->functionality = I2C_FUNC_SLAVE | DW_IC_DEFAULT_FUNCTIONALITY;
-
-	dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
-			 DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED;
-
-	dev->mode = DW_IC_SLAVE;
+	return -ENODEV;
 }
+#endif
 
 static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
 {
@@ -227,12 +173,23 @@ static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
 		pm_runtime_put_noidle(dev->dev);
 }
 
-static const u32 supported_speeds[] = {
-	I2C_MAX_HIGH_SPEED_MODE_FREQ,
-	I2C_MAX_FAST_MODE_PLUS_FREQ,
-	I2C_MAX_FAST_MODE_FREQ,
-	I2C_MAX_STANDARD_MODE_FREQ,
-};
+static int dw_i2c_plat_request_regs(struct dw_i2c_dev *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev->dev);
+	int ret;
+
+	switch (dev->flags & MODEL_MASK) {
+	case MODEL_BAIKAL_BT1:
+		ret = bt1_i2c_request_regs(dev);
+		break;
+	default:
+		dev->base = devm_platform_ioremap_resource(pdev, 0);
+		ret = PTR_ERR_OR_ZERO(dev->base);
+		break;
+	}
+
+	return ret;
+}
 
 static int dw_i2c_plat_probe(struct platform_device *pdev)
 {
@@ -240,9 +197,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	struct i2c_adapter *adap;
 	struct dw_i2c_dev *dev;
 	struct i2c_timings *t;
-	u32 acpi_speed;
-	struct resource *mem;
-	int i, irq, ret;
+	int irq, ret;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
@@ -252,15 +207,15 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	if (!dev)
 		return -ENOMEM;
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dev->base = devm_ioremap_resource(&pdev->dev, mem);
-	if (IS_ERR(dev->base))
-		return PTR_ERR(dev->base);
-
+	dev->flags = (uintptr_t)device_get_match_data(&pdev->dev);
 	dev->dev = &pdev->dev;
 	dev->irq = irq;
 	platform_set_drvdata(pdev, dev);
 
+	ret = dw_i2c_plat_request_regs(dev);
+	if (ret)
+		return ret;
+
 	dev->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
 	if (IS_ERR(dev->rst))
 		return PTR_ERR(dev->rst);
@@ -273,60 +228,23 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	else
 		i2c_parse_fw_timings(&pdev->dev, t, false);
 
-	acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
-	/*
-	 * Some DSTDs use a non standard speed, round down to the lowest
-	 * standard speed.
-	 */
-	for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
-		if (acpi_speed >= supported_speeds[i])
-			break;
-	}
-	acpi_speed = i < ARRAY_SIZE(supported_speeds) ? supported_speeds[i] : 0;
-
-	/*
-	 * Find bus speed from the "clock-frequency" device property, ACPI
-	 * or by using fast mode if neither is set.
-	 */
-	if (acpi_speed && t->bus_freq_hz)
-		t->bus_freq_hz = min(t->bus_freq_hz, acpi_speed);
-	else if (acpi_speed || t->bus_freq_hz)
-		t->bus_freq_hz = max(t->bus_freq_hz, acpi_speed);
-	else
-		t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
-
-	dev->flags |= (uintptr_t)device_get_match_data(&pdev->dev);
+	i2c_dw_acpi_adjust_bus_speed(&pdev->dev);
 
 	if (pdev->dev.of_node)
 		dw_i2c_of_configure(pdev);
 
 	if (has_acpi_companion(&pdev->dev))
-		dw_i2c_acpi_configure(pdev);
+		i2c_dw_acpi_configure(&pdev->dev);
 
-	/*
-	 * Only standard mode at 100kHz, fast mode at 400kHz,
-	 * fast mode plus at 1MHz and high speed mode at 3.4MHz are supported.
-	 */
-	for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
-		if (t->bus_freq_hz == supported_speeds[i])
-			break;
-	}
-	if (i == ARRAY_SIZE(supported_speeds)) {
-		dev_err(&pdev->dev,
-			"%d Hz is unsupported, only 100kHz, 400kHz, 1MHz and 3.4MHz are supported\n",
-			t->bus_freq_hz);
-		ret = -EINVAL;
+	ret = i2c_dw_validate_speed(dev);
+	if (ret)
 		goto exit_reset;
-	}
 
 	ret = i2c_dw_probe_lock_support(dev);
 	if (ret)
 		goto exit_reset;
 
-	if (i2c_detect_slave_mode(&pdev->dev))
-		i2c_dw_configure_slave(dev);
-	else
-		i2c_dw_configure_master(dev);
+	i2c_dw_configure(dev);
 
 	/* Optional interface clock */
 	dev->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
@@ -377,11 +295,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 	pm_runtime_enable(&pdev->dev);
 
-	if (dev->mode == DW_IC_SLAVE)
-		ret = i2c_dw_probe_slave(dev);
-	else
-		ret = i2c_dw_probe(dev);
-
+	ret = i2c_dw_probe(dev);
 	if (ret)
 		goto exit_probe;
 
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index f5ecf76c0d02..44974b53a626 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -14,18 +14,19 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/pm_runtime.h>
+#include <linux/regmap.h>
 
 #include "i2c-designware-core.h"
 
 static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev)
 {
 	/* Configure Tx/Rx FIFO threshold levels. */
-	dw_writel(dev, 0, DW_IC_TX_TL);
-	dw_writel(dev, 0, DW_IC_RX_TL);
+	regmap_write(dev->map, DW_IC_TX_TL, 0);
+	regmap_write(dev->map, DW_IC_RX_TL, 0);
 
 	/* Configure the I2C slave. */
-	dw_writel(dev, dev->slave_cfg, DW_IC_CON);
-	dw_writel(dev, DW_IC_INTR_SLAVE_MASK, DW_IC_INTR_MASK);
+	regmap_write(dev->map, DW_IC_CON, dev->slave_cfg);
+	regmap_write(dev->map, DW_IC_INTR_MASK, DW_IC_INTR_SLAVE_MASK);
 }
 
 /**
@@ -49,7 +50,7 @@ static int i2c_dw_init_slave(struct dw_i2c_dev *dev)
 
 	/* Write SDA hold time if supported */
 	if (dev->sda_hold_time)
-		dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
+		regmap_write(dev->map, DW_IC_SDA_HOLD, dev->sda_hold_time);
 
 	i2c_dw_configure_fifo_slave(dev);
 	i2c_dw_release_lock(dev);
@@ -72,7 +73,7 @@ static int i2c_dw_reg_slave(struct i2c_client *slave)
 	 * the address to which the DW_apb_i2c responds.
 	 */
 	__i2c_dw_disable_nowait(dev);
-	dw_writel(dev, slave->addr, DW_IC_SAR);
+	regmap_write(dev->map, DW_IC_SAR, slave->addr);
 	dev->slave = slave;
 
 	__i2c_dw_enable(dev);
@@ -103,7 +104,7 @@ static int i2c_dw_unreg_slave(struct i2c_client *slave)
 
 static u32 i2c_dw_read_clear_intrbits_slave(struct dw_i2c_dev *dev)
 {
-	u32 stat;
+	u32 stat, dummy;
 
 	/*
 	 * The IC_INTR_STAT register just indicates "enabled" interrupts.
@@ -111,39 +112,39 @@ static u32 i2c_dw_read_clear_intrbits_slave(struct dw_i2c_dev *dev)
 	 * in the IC_RAW_INTR_STAT register.
 	 *
 	 * That is,
-	 *   stat = dw_readl(IC_INTR_STAT);
+	 *   stat = readl(IC_INTR_STAT);
 	 * equals to,
-	 *   stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK);
+	 *   stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK);
 	 *
 	 * The raw version might be useful for debugging purposes.
 	 */
-	stat = dw_readl(dev, DW_IC_INTR_STAT);
+	regmap_read(dev->map, DW_IC_INTR_STAT, &stat);
 
 	/*
 	 * Do not use the IC_CLR_INTR register to clear interrupts, or
 	 * you'll miss some interrupts, triggered during the period from
-	 * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR).
+	 * readl(IC_INTR_STAT) to readl(IC_CLR_INTR).
 	 *
 	 * Instead, use the separately-prepared IC_CLR_* registers.
 	 */
 	if (stat & DW_IC_INTR_TX_ABRT)
-		dw_readl(dev, DW_IC_CLR_TX_ABRT);
+		regmap_read(dev->map, DW_IC_CLR_TX_ABRT, &dummy);
 	if (stat & DW_IC_INTR_RX_UNDER)
-		dw_readl(dev, DW_IC_CLR_RX_UNDER);
+		regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &dummy);
 	if (stat & DW_IC_INTR_RX_OVER)
-		dw_readl(dev, DW_IC_CLR_RX_OVER);
+		regmap_read(dev->map, DW_IC_CLR_RX_OVER, &dummy);
 	if (stat & DW_IC_INTR_TX_OVER)
-		dw_readl(dev, DW_IC_CLR_TX_OVER);
+		regmap_read(dev->map, DW_IC_CLR_TX_OVER, &dummy);
 	if (stat & DW_IC_INTR_RX_DONE)
-		dw_readl(dev, DW_IC_CLR_RX_DONE);
+		regmap_read(dev->map, DW_IC_CLR_RX_DONE, &dummy);
 	if (stat & DW_IC_INTR_ACTIVITY)
-		dw_readl(dev, DW_IC_CLR_ACTIVITY);
+		regmap_read(dev->map, DW_IC_CLR_ACTIVITY, &dummy);
 	if (stat & DW_IC_INTR_STOP_DET)
-		dw_readl(dev, DW_IC_CLR_STOP_DET);
+		regmap_read(dev->map, DW_IC_CLR_STOP_DET, &dummy);
 	if (stat & DW_IC_INTR_START_DET)
-		dw_readl(dev, DW_IC_CLR_START_DET);
+		regmap_read(dev->map, DW_IC_CLR_START_DET, &dummy);
 	if (stat & DW_IC_INTR_GEN_CALL)
-		dw_readl(dev, DW_IC_CLR_GEN_CALL);
+		regmap_read(dev->map, DW_IC_CLR_GEN_CALL, &dummy);
 
 	return stat;
 }
@@ -155,14 +156,14 @@ static u32 i2c_dw_read_clear_intrbits_slave(struct dw_i2c_dev *dev)
 
 static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 {
-	u32 raw_stat, stat, enabled;
-	u8 val, slave_activity;
+	u32 raw_stat, stat, enabled, tmp;
+	u8 val = 0, slave_activity;
 
-	stat = dw_readl(dev, DW_IC_INTR_STAT);
-	enabled = dw_readl(dev, DW_IC_ENABLE);
-	raw_stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
-	slave_activity = ((dw_readl(dev, DW_IC_STATUS) &
-		DW_IC_STATUS_SLAVE_ACTIVITY) >> 6);
+	regmap_read(dev->map, DW_IC_INTR_STAT, &stat);
+	regmap_read(dev->map, DW_IC_ENABLE, &enabled);
+	regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &raw_stat);
+	regmap_read(dev->map, DW_IC_STATUS, &tmp);
+	slave_activity = ((tmp & DW_IC_STATUS_SLAVE_ACTIVITY) >> 6);
 
 	if (!enabled || !(raw_stat & ~DW_IC_INTR_ACTIVITY) || !dev->slave)
 		return 0;
@@ -177,7 +178,8 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 	if (stat & DW_IC_INTR_RD_REQ) {
 		if (slave_activity) {
 			if (stat & DW_IC_INTR_RX_FULL) {
-				val = dw_readl(dev, DW_IC_DATA_CMD);
+				regmap_read(dev->map, DW_IC_DATA_CMD, &tmp);
+				val = tmp;
 
 				if (!i2c_slave_event(dev->slave,
 						     I2C_SLAVE_WRITE_RECEIVED,
@@ -185,24 +187,24 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 					dev_vdbg(dev->dev, "Byte %X acked!",
 						 val);
 				}
-				dw_readl(dev, DW_IC_CLR_RD_REQ);
+				regmap_read(dev->map, DW_IC_CLR_RD_REQ, &tmp);
 				stat = i2c_dw_read_clear_intrbits_slave(dev);
 			} else {
-				dw_readl(dev, DW_IC_CLR_RD_REQ);
-				dw_readl(dev, DW_IC_CLR_RX_UNDER);
+				regmap_read(dev->map, DW_IC_CLR_RD_REQ, &tmp);
+				regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &tmp);
 				stat = i2c_dw_read_clear_intrbits_slave(dev);
 			}
 			if (!i2c_slave_event(dev->slave,
 					     I2C_SLAVE_READ_REQUESTED,
 					     &val))
-				dw_writel(dev, val, DW_IC_DATA_CMD);
+				regmap_write(dev->map, DW_IC_DATA_CMD, val);
 		}
 	}
 
 	if (stat & DW_IC_INTR_RX_DONE) {
 		if (!i2c_slave_event(dev->slave, I2C_SLAVE_READ_PROCESSED,
 				     &val))
-			dw_readl(dev, DW_IC_CLR_RX_DONE);
+			regmap_read(dev->map, DW_IC_CLR_RX_DONE, &tmp);
 
 		i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
 		stat = i2c_dw_read_clear_intrbits_slave(dev);
@@ -210,7 +212,8 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 	}
 
 	if (stat & DW_IC_INTR_RX_FULL) {
-		val = dw_readl(dev, DW_IC_DATA_CMD);
+		regmap_read(dev->map, DW_IC_DATA_CMD, &tmp);
+		val = tmp;
 		if (!i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_RECEIVED,
 				     &val))
 			dev_vdbg(dev->dev, "Byte %X acked!", val);
@@ -241,6 +244,17 @@ static const struct i2c_algorithm i2c_dw_algo = {
 	.unreg_slave = i2c_dw_unreg_slave,
 };
 
+void i2c_dw_configure_slave(struct dw_i2c_dev *dev)
+{
+	dev->functionality = I2C_FUNC_SLAVE | DW_IC_DEFAULT_FUNCTIONALITY;
+
+	dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
+			 DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED;
+
+	dev->mode = DW_IC_SLAVE;
+}
+EXPORT_SYMBOL_GPL(i2c_dw_configure_slave);
+
 int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
 {
 	struct i2c_adapter *adap = &dev->adapter;
@@ -252,7 +266,7 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
 	dev->disable = i2c_dw_disable;
 	dev->disable_int = i2c_dw_disable_int;
 
-	ret = i2c_dw_set_reg_access(dev);
+	ret = i2c_dw_init_regmap(dev);
 	if (ret)
 		return ret;
 
@@ -260,7 +274,9 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
 	if (ret)
 		return ret;
 
-	i2c_dw_set_fifo_size(dev);
+	ret = i2c_dw_set_fifo_size(dev);
+	if (ret)
+		return ret;
 
 	ret = dev->init(dev);
 	if (ret)
diff --git a/drivers/i2c/busses/i2c-digicolor.c b/drivers/i2c/busses/i2c-digicolor.c
index 056a5c4f0833..332f00437479 100644
--- a/drivers/i2c/busses/i2c-digicolor.c
+++ b/drivers/i2c/busses/i2c-digicolor.c
@@ -290,7 +290,6 @@ static int dc_i2c_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct dc_i2c *i2c;
-	struct resource *r;
 	int ret = 0, irq;
 
 	i2c = devm_kzalloc(&pdev->dev, sizeof(struct dc_i2c), GFP_KERNEL);
@@ -311,8 +310,7 @@ static int dc_i2c_probe(struct platform_device *pdev)
 	if (IS_ERR(i2c->clk))
 		return PTR_ERR(i2c->clk);
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->regs = devm_ioremap_resource(&pdev->dev, r);
+	i2c->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->regs))
 		return PTR_ERR(i2c->regs);
 
diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c
index 18cca8f56da8..838ce0947191 100644
--- a/drivers/i2c/busses/i2c-efm32.c
+++ b/drivers/i2c/busses/i2c-efm32.c
@@ -312,9 +312,6 @@ static int efm32_i2c_probe(struct platform_device *pdev)
 	int ret;
 	u32 clkdiv;
 
-	if (!np)
-		return -EINVAL;
-
 	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
 	if (!ddata)
 		return -ENOMEM;
@@ -352,7 +349,6 @@ static int efm32_i2c_probe(struct platform_device *pdev)
 
 	ret = platform_get_irq(pdev, 0);
 	if (ret <= 0) {
-		dev_err(&pdev->dev, "failed to get irq (%d)\n", ret);
 		if (!ret)
 			ret = -EINVAL;
 		return ret;
diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c
index 959d4912ec0d..1a319352e51b 100644
--- a/drivers/i2c/busses/i2c-emev2.c
+++ b/drivers/i2c/busses/i2c-emev2.c
@@ -361,15 +361,13 @@ static const struct i2c_algorithm em_i2c_algo = {
 static int em_i2c_probe(struct platform_device *pdev)
 {
 	struct em_i2c_device *priv;
-	struct resource *r;
 	int ret;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->base = devm_ioremap_resource(&pdev->dev, r);
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);
 
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 527030953ba1..6ce3ec03b595 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -736,7 +736,6 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct exynos5_i2c *i2c;
-	struct resource *mem;
 	int ret;
 
 	i2c = devm_kzalloc(&pdev->dev, sizeof(struct exynos5_i2c), GFP_KERNEL);
@@ -762,8 +761,7 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
+	i2c->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->regs)) {
 		ret = PTR_ERR(i2c->regs);
 		goto err_clk;
@@ -879,6 +877,6 @@ static struct platform_driver exynos5_i2c_driver = {
 module_platform_driver(exynos5_i2c_driver);
 
 MODULE_DESCRIPTION("Exynos5 HS-I2C Bus driver");
-MODULE_AUTHOR("Naveen Krishna Chatradhi, <ch.naveen@samsung.com>");
-MODULE_AUTHOR("Taekgyun Ko, <taeggyun.ko@samsung.com>");
+MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@samsung.com>");
+MODULE_AUTHOR("Taekgyun Ko <taeggyun.ko@samsung.com>");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
index 6610304b6dc6..ab15b1ec2ab3 100644
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -388,7 +388,6 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct hix5hd2_i2c_priv *priv;
-	struct resource *mem;
 	unsigned int freq;
 	int irq, ret;
 
@@ -409,8 +408,7 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev)
 		}
 	}
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->regs = devm_ioremap_resource(&pdev->dev, mem);
+	priv->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->regs))
 		return PTR_ERR(priv->regs);
 
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 4f333889489c..fea644921a76 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1318,6 +1318,12 @@ static void i801_probe_optional_slaves(struct i801_priv *priv)
 
 	if (is_dell_system_with_lis3lv02d())
 		register_dell_lis3lv02d_i2c_device(priv);
+
+	/* Instantiate SPD EEPROMs unless the SMBus is multiplexed */
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO)
+	if (!priv->mux_drvdata)
+#endif
+		i2c_register_spd(&priv->adapter);
 }
 #else
 static void __init input_apanel_init(void) {}
diff --git a/drivers/i2c/busses/i2c-icy.c b/drivers/i2c/busses/i2c-icy.c
index 271470f4d8a9..66c9923fc766 100644
--- a/drivers/i2c/busses/i2c-icy.c
+++ b/drivers/i2c/busses/i2c-icy.c
@@ -43,6 +43,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-pcf.h>
 
+#include <asm/amigahw.h>
 #include <asm/amigaints.h>
 #include <linux/zorro.h>
 
diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index 422097a31c95..98a89301ed2a 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -1330,7 +1330,6 @@ static int img_i2c_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
 	struct img_i2c *i2c;
-	struct resource *res;
 	int irq, ret;
 	u32 val;
 
@@ -1338,16 +1337,13 @@ static int img_i2c_probe(struct platform_device *pdev)
 	if (!i2c)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->base = devm_ioremap_resource(&pdev->dev, res);
+	i2c->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->base))
 		return PTR_ERR(i2c->base);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "can't get irq number\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	i2c->sys_clk = devm_clk_get(&pdev->dev, "sys");
 	if (IS_ERR(i2c->sys_clk)) {
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index 94743ba581fe..9db6ccded5e9 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -551,10 +551,8 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 		return PTR_ERR(lpi2c_imx->base);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "can't get irq number\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	lpi2c_imx->adapter.owner	= THIS_MODULE;
 	lpi2c_imx->adapter.algo		= &lpi2c_imx_algo;
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c
index b426fc956938..ba831df6661e 100644
--- a/drivers/i2c/busses/i2c-jz4780.c
+++ b/drivers/i2c/busses/i2c-jz4780.c
@@ -763,7 +763,6 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
 	int ret = 0;
 	unsigned int clk_freq = 0;
 	unsigned short tmp;
-	struct resource *r;
 	struct jz4780_i2c *i2c;
 
 	i2c = devm_kzalloc(&pdev->dev, sizeof(struct jz4780_i2c), GFP_KERNEL);
@@ -787,8 +786,7 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
 	init_completion(&i2c->trans_waitq);
 	spin_lock_init(&i2c->lock);
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->iomem = devm_ioremap_resource(&pdev->dev, r);
+	i2c->iomem = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->iomem))
 		return PTR_ERR(i2c->iomem);
 
diff --git a/drivers/i2c/busses/i2c-lpc2k.c b/drivers/i2c/busses/i2c-lpc2k.c
index 13b0c12e2dba..4e30c5267142 100644
--- a/drivers/i2c/busses/i2c-lpc2k.c
+++ b/drivers/i2c/busses/i2c-lpc2k.c
@@ -346,7 +346,6 @@ static const struct i2c_algorithm i2c_lpc2k_algorithm = {
 static int i2c_lpc2k_probe(struct platform_device *pdev)
 {
 	struct lpc2k_i2c *i2c;
-	struct resource *res;
 	u32 bus_clk_rate;
 	u32 scl_high;
 	u32 clkrate;
@@ -356,16 +355,13 @@ static int i2c_lpc2k_probe(struct platform_device *pdev)
 	if (!i2c)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->base = devm_ioremap_resource(&pdev->dev, res);
+	i2c->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->base))
 		return PTR_ERR(i2c->base);
 
 	i2c->irq = platform_get_irq(pdev, 0);
-	if (i2c->irq < 0) {
-		dev_err(&pdev->dev, "can't get interrupt resource\n");
+	if (i2c->irq < 0)
 		return i2c->irq;
-	}
 
 	init_waitqueue_head(&i2c->wait);
 
diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index 06b3bed78421..c5dec572fc48 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -397,7 +397,6 @@ static int meson_i2c_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct meson_i2c *i2c;
-	struct resource *mem;
 	struct i2c_timings timings;
 	int irq, ret = 0;
 
@@ -422,16 +421,13 @@ static int meson_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(i2c->clk);
 	}
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
+	i2c->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->regs))
 		return PTR_ERR(i2c->regs);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "can't find IRQ\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_irq(&pdev->dev, irq, meson_i2c_irq, 0, NULL, i2c);
 	if (ret < 0) {
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 0ca6c38a15eb..deef69e56906 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -40,12 +40,11 @@
 #define I2C_SOFT_RST			0x0001
 #define I2C_FIFO_ADDR_CLR		0x0001
 #define I2C_DELAY_LEN			0x0002
-#define I2C_ST_START_CON		0x8001
-#define I2C_FS_START_CON		0x1800
 #define I2C_TIME_CLR_VALUE		0x0000
 #define I2C_TIME_DEFAULT_VALUE		0x0003
 #define I2C_WRRD_TRANAC_VALUE		0x0002
 #define I2C_RD_TRANAC_VALUE		0x0001
+#define I2C_SCL_MIS_COMP_VALUE		0x0000
 
 #define I2C_DMA_CON_TX			0x0000
 #define I2C_DMA_CON_RX			0x0001
@@ -55,10 +54,13 @@
 #define I2C_DMA_HARD_RST		0x0002
 #define I2C_DMA_4G_MODE			0x0001
 
-#define I2C_DEFAULT_CLK_DIV		5
 #define MAX_SAMPLE_CNT_DIV		8
 #define MAX_STEP_CNT_DIV		64
+#define MAX_CLOCK_DIV			256
 #define MAX_HS_STEP_CNT_DIV		8
+#define I2C_STANDARD_MODE_BUFFER	(1000 / 2)
+#define I2C_FAST_MODE_BUFFER		(300 / 2)
+#define I2C_FAST_MODE_PLUS_BUFFER	(20 / 2)
 
 #define I2C_CONTROL_RS                  (0x1 << 1)
 #define I2C_CONTROL_DMA_EN              (0x1 << 2)
@@ -123,6 +125,12 @@ enum I2C_REGS_OFFSET {
 	OFFSET_TRANSFER_LEN_AUX,
 	OFFSET_CLOCK_DIV,
 	OFFSET_LTIMING,
+	OFFSET_SCL_HIGH_LOW_RATIO,
+	OFFSET_HS_SCL_HIGH_LOW_RATIO,
+	OFFSET_SCL_MIS_COMP_POINT,
+	OFFSET_STA_STO_AC_TIMING,
+	OFFSET_HS_STA_STO_AC_TIMING,
+	OFFSET_SDA_TIMING,
 };
 
 static const u16 mt_i2c_regs_v1[] = {
@@ -150,6 +158,12 @@ static const u16 mt_i2c_regs_v1[] = {
 	[OFFSET_DEBUGCTRL] = 0x68,
 	[OFFSET_TRANSFER_LEN_AUX] = 0x6c,
 	[OFFSET_CLOCK_DIV] = 0x70,
+	[OFFSET_SCL_HIGH_LOW_RATIO] = 0x74,
+	[OFFSET_HS_SCL_HIGH_LOW_RATIO] = 0x78,
+	[OFFSET_SCL_MIS_COMP_POINT] = 0x7C,
+	[OFFSET_STA_STO_AC_TIMING] = 0x80,
+	[OFFSET_HS_STA_STO_AC_TIMING] = 0x84,
+	[OFFSET_SDA_TIMING] = 0x88,
 };
 
 static const u16 mt_i2c_regs_v2[] = {
@@ -168,9 +182,11 @@ static const u16 mt_i2c_regs_v2[] = {
 	[OFFSET_HS] = 0x30,
 	[OFFSET_IO_CONFIG] = 0x34,
 	[OFFSET_FIFO_ADDR_CLR] = 0x38,
+	[OFFSET_SDA_TIMING] = 0x3c,
 	[OFFSET_TRANSFER_LEN_AUX] = 0x44,
 	[OFFSET_CLOCK_DIV] = 0x48,
 	[OFFSET_SOFTRESET] = 0x50,
+	[OFFSET_SCL_MIS_COMP_POINT] = 0x90,
 	[OFFSET_DEBUGSTAT] = 0xe0,
 	[OFFSET_DEBUGCTRL] = 0xe8,
 	[OFFSET_FIFO_STAT] = 0xf4,
@@ -191,6 +207,19 @@ struct mtk_i2c_compatible {
 	unsigned char ltiming_adjust: 1;
 };
 
+struct mtk_i2c_ac_timing {
+	u16 htiming;
+	u16 ltiming;
+	u16 hs;
+	u16 ext;
+	u16 inter_clk_div;
+	u16 scl_hl_ratio;
+	u16 hs_scl_hl_ratio;
+	u16 sta_stop;
+	u16 hs_sta_stop;
+	u16 sda_timing;
+};
+
 struct mtk_i2c {
 	struct i2c_adapter adap;	/* i2c host adapter */
 	struct device *dev;
@@ -215,9 +244,46 @@ struct mtk_i2c {
 	u16 ltiming_reg;
 	unsigned char auto_restart;
 	bool ignore_restart_irq;
+	struct mtk_i2c_ac_timing ac_timing;
 	const struct mtk_i2c_compatible *dev_comp;
 };
 
+/**
+ * struct i2c_spec_values:
+ * min_low_ns: min LOW period of the SCL clock
+ * min_su_sta_ns: min set-up time for a repeated START condition
+ * max_hd_dat_ns: max data hold time
+ * min_su_dat_ns: min data set-up time
+ */
+struct i2c_spec_values {
+	unsigned int min_low_ns;
+	unsigned int min_high_ns;
+	unsigned int min_su_sta_ns;
+	unsigned int max_hd_dat_ns;
+	unsigned int min_su_dat_ns;
+};
+
+static const struct i2c_spec_values standard_mode_spec = {
+	.min_low_ns = 4700 + I2C_STANDARD_MODE_BUFFER,
+	.min_su_sta_ns = 4700 + I2C_STANDARD_MODE_BUFFER,
+	.max_hd_dat_ns = 3450 - I2C_STANDARD_MODE_BUFFER,
+	.min_su_dat_ns = 250 + I2C_STANDARD_MODE_BUFFER,
+};
+
+static const struct i2c_spec_values fast_mode_spec = {
+	.min_low_ns = 1300 + I2C_FAST_MODE_BUFFER,
+	.min_su_sta_ns = 600 + I2C_FAST_MODE_BUFFER,
+	.max_hd_dat_ns = 900 - I2C_FAST_MODE_BUFFER,
+	.min_su_dat_ns = 100 + I2C_FAST_MODE_BUFFER,
+};
+
+static const struct i2c_spec_values fast_mode_plus_spec = {
+	.min_low_ns = 500 + I2C_FAST_MODE_PLUS_BUFFER,
+	.min_su_sta_ns = 260 + I2C_FAST_MODE_PLUS_BUFFER,
+	.max_hd_dat_ns = 400 - I2C_FAST_MODE_PLUS_BUFFER,
+	.min_su_dat_ns = 50 + I2C_FAST_MODE_PLUS_BUFFER,
+};
+
 static const struct i2c_adapter_quirks mt6577_i2c_quirks = {
 	.flags = I2C_AQ_COMB_WRITE_THEN_READ,
 	.max_num_msgs = 1,
@@ -397,14 +463,38 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
 	if (i2c->dev_comp->dcm)
 		mtk_i2c_writew(i2c, I2C_DCM_DISABLE, OFFSET_DCM_EN);
 
-	if (i2c->dev_comp->timing_adjust)
-		mtk_i2c_writew(i2c, I2C_DEFAULT_CLK_DIV - 1, OFFSET_CLOCK_DIV);
-
 	mtk_i2c_writew(i2c, i2c->timing_reg, OFFSET_TIMING);
 	mtk_i2c_writew(i2c, i2c->high_speed_reg, OFFSET_HS);
 	if (i2c->dev_comp->ltiming_adjust)
 		mtk_i2c_writew(i2c, i2c->ltiming_reg, OFFSET_LTIMING);
 
+	if (i2c->dev_comp->timing_adjust) {
+		mtk_i2c_writew(i2c, i2c->ac_timing.ext, OFFSET_EXT_CONF);
+		mtk_i2c_writew(i2c, i2c->ac_timing.inter_clk_div,
+			       OFFSET_CLOCK_DIV);
+		mtk_i2c_writew(i2c, I2C_SCL_MIS_COMP_VALUE,
+			       OFFSET_SCL_MIS_COMP_POINT);
+		mtk_i2c_writew(i2c, i2c->ac_timing.sda_timing,
+			       OFFSET_SDA_TIMING);
+
+		if (i2c->dev_comp->ltiming_adjust) {
+			mtk_i2c_writew(i2c, i2c->ac_timing.htiming,
+				       OFFSET_TIMING);
+			mtk_i2c_writew(i2c, i2c->ac_timing.hs, OFFSET_HS);
+			mtk_i2c_writew(i2c, i2c->ac_timing.ltiming,
+				       OFFSET_LTIMING);
+		} else {
+			mtk_i2c_writew(i2c, i2c->ac_timing.scl_hl_ratio,
+				       OFFSET_SCL_HIGH_LOW_RATIO);
+			mtk_i2c_writew(i2c, i2c->ac_timing.hs_scl_hl_ratio,
+				       OFFSET_HS_SCL_HIGH_LOW_RATIO);
+			mtk_i2c_writew(i2c, i2c->ac_timing.sta_stop,
+				       OFFSET_STA_STO_AC_TIMING);
+			mtk_i2c_writew(i2c, i2c->ac_timing.hs_sta_stop,
+				       OFFSET_HS_STA_STO_AC_TIMING);
+		}
+	}
+
 	/* If use i2c pin from PMIC mt6397 side, need set PATH_DIR first */
 	if (i2c->have_pmic)
 		mtk_i2c_writew(i2c, I2C_CONTROL_WRAPPER, OFFSET_PATH_DIR);
@@ -422,6 +512,126 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
 	writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST);
 }
 
+static const struct i2c_spec_values *mtk_i2c_get_spec(unsigned int speed)
+{
+	if (speed <= I2C_MAX_STANDARD_MODE_FREQ)
+		return &standard_mode_spec;
+	else if (speed <= I2C_MAX_FAST_MODE_FREQ)
+		return &fast_mode_spec;
+	else
+		return &fast_mode_plus_spec;
+}
+
+static int mtk_i2c_max_step_cnt(unsigned int target_speed)
+{
+	if (target_speed > I2C_MAX_FAST_MODE_FREQ)
+		return MAX_HS_STEP_CNT_DIV;
+	else
+		return MAX_STEP_CNT_DIV;
+}
+
+/*
+ * Check and Calculate i2c ac-timing
+ *
+ * Hardware design:
+ * sample_ns = (1000000000 * (sample_cnt + 1)) / clk_src
+ * xxx_cnt_div =  spec->min_xxx_ns / sample_ns
+ *
+ * Sample_ns is rounded down for xxx_cnt_div would be greater
+ * than the smallest spec.
+ * The sda_timing is chosen as the middle value between
+ * the largest and smallest.
+ */
+static int mtk_i2c_check_ac_timing(struct mtk_i2c *i2c,
+				   unsigned int clk_src,
+				   unsigned int check_speed,
+				   unsigned int step_cnt,
+				   unsigned int sample_cnt)
+{
+	const struct i2c_spec_values *spec;
+	unsigned int su_sta_cnt, low_cnt, high_cnt, max_step_cnt;
+	unsigned int sda_max, sda_min, clk_ns, max_sta_cnt = 0x3f;
+	unsigned int sample_ns = div_u64(1000000000ULL * (sample_cnt + 1),
+					 clk_src);
+
+	if (!i2c->dev_comp->timing_adjust)
+		return 0;
+
+	if (i2c->dev_comp->ltiming_adjust)
+		max_sta_cnt = 0x100;
+
+	spec = mtk_i2c_get_spec(check_speed);
+
+	if (i2c->dev_comp->ltiming_adjust)
+		clk_ns = 1000000000 / clk_src;
+	else
+		clk_ns = sample_ns / 2;
+
+	su_sta_cnt = DIV_ROUND_UP(spec->min_su_sta_ns, clk_ns);
+	if (su_sta_cnt > max_sta_cnt)
+		return -1;
+
+	low_cnt = DIV_ROUND_UP(spec->min_low_ns, sample_ns);
+	max_step_cnt = mtk_i2c_max_step_cnt(check_speed);
+	if ((2 * step_cnt) > low_cnt && low_cnt < max_step_cnt) {
+		if (low_cnt > step_cnt) {
+			high_cnt = 2 * step_cnt - low_cnt;
+		} else {
+			high_cnt = step_cnt;
+			low_cnt = step_cnt;
+		}
+	} else {
+		return -2;
+	}
+
+	sda_max = spec->max_hd_dat_ns / sample_ns;
+	if (sda_max > low_cnt)
+		sda_max = 0;
+
+	sda_min = DIV_ROUND_UP(spec->min_su_dat_ns, sample_ns);
+	if (sda_min < low_cnt)
+		sda_min = 0;
+
+	if (sda_min > sda_max)
+		return -3;
+
+	if (check_speed > I2C_MAX_FAST_MODE_FREQ) {
+		if (i2c->dev_comp->ltiming_adjust) {
+			i2c->ac_timing.hs = I2C_TIME_DEFAULT_VALUE |
+				(sample_cnt << 12) | (high_cnt << 8);
+			i2c->ac_timing.ltiming &= ~GENMASK(15, 9);
+			i2c->ac_timing.ltiming |= (sample_cnt << 12) |
+				(low_cnt << 9);
+			i2c->ac_timing.ext &= ~GENMASK(7, 1);
+			i2c->ac_timing.ext |= (su_sta_cnt << 1) | (1 << 0);
+		} else {
+			i2c->ac_timing.hs_scl_hl_ratio = (1 << 12) |
+				(high_cnt << 6) | low_cnt;
+			i2c->ac_timing.hs_sta_stop = (su_sta_cnt << 8) |
+				su_sta_cnt;
+		}
+		i2c->ac_timing.sda_timing &= ~GENMASK(11, 6);
+		i2c->ac_timing.sda_timing |= (1 << 12) |
+			((sda_max + sda_min) / 2) << 6;
+	} else {
+		if (i2c->dev_comp->ltiming_adjust) {
+			i2c->ac_timing.htiming = (sample_cnt << 8) | (high_cnt);
+			i2c->ac_timing.ltiming = (sample_cnt << 6) | (low_cnt);
+			i2c->ac_timing.ext = (su_sta_cnt << 8) | (1 << 0);
+		} else {
+			i2c->ac_timing.scl_hl_ratio = (1 << 12) |
+				(high_cnt << 6) | low_cnt;
+			i2c->ac_timing.sta_stop = (su_sta_cnt << 8) |
+				su_sta_cnt;
+		}
+
+		i2c->ac_timing.sda_timing = (1 << 12) |
+			(sda_max + sda_min) / 2;
+	}
+
+	return 0;
+}
+
 /*
  * Calculate i2c port speed
  *
@@ -446,15 +656,12 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
 	unsigned int opt_div;
 	unsigned int best_mul;
 	unsigned int cnt_mul;
+	int ret = -EINVAL;
 
 	if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ)
 		target_speed = I2C_MAX_FAST_MODE_PLUS_FREQ;
 
-	if (target_speed > I2C_MAX_FAST_MODE_FREQ)
-		max_step_cnt = MAX_HS_STEP_CNT_DIV;
-	else
-		max_step_cnt = MAX_STEP_CNT_DIV;
-
+	max_step_cnt = mtk_i2c_max_step_cnt(target_speed);
 	base_step_cnt = max_step_cnt;
 	/* Find the best combination */
 	opt_div = DIV_ROUND_UP(clk_src >> 1, target_speed);
@@ -473,6 +680,11 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
 			continue;
 
 		if (cnt_mul < best_mul) {
+			ret = mtk_i2c_check_ac_timing(i2c, clk_src,
+				target_speed, step_cnt - 1, sample_cnt - 1);
+			if (ret)
+				continue;
+
 			best_mul = cnt_mul;
 			base_sample_cnt = sample_cnt;
 			base_step_cnt = step_cnt;
@@ -481,6 +693,9 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
 		}
 	}
 
+	if (ret)
+		return -EINVAL;
+
 	sample_cnt = base_sample_cnt;
 	step_cnt = base_step_cnt;
 
@@ -506,47 +721,68 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
 	unsigned int l_step_cnt;
 	unsigned int l_sample_cnt;
 	unsigned int target_speed;
+	unsigned int clk_div;
+	unsigned int max_clk_div;
 	int ret;
 
-	clk_src = parent_clk / i2c->clk_src_div;
 	target_speed = i2c->speed_hz;
+	parent_clk /= i2c->clk_src_div;
 
-	if (target_speed > I2C_MAX_FAST_MODE_FREQ) {
-		/* Set master code speed register */
-		ret = mtk_i2c_calculate_speed(i2c, clk_src, I2C_MAX_FAST_MODE_FREQ,
-					      &l_step_cnt, &l_sample_cnt);
-		if (ret < 0)
-			return ret;
-
-		i2c->timing_reg = (l_sample_cnt << 8) | l_step_cnt;
-
-		/* Set the high speed mode register */
-		ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
-					      &step_cnt, &sample_cnt);
-		if (ret < 0)
-			return ret;
-
-		i2c->high_speed_reg = I2C_TIME_DEFAULT_VALUE |
-			(sample_cnt << 12) | (step_cnt << 8);
+	if (i2c->dev_comp->timing_adjust)
+		max_clk_div = MAX_CLOCK_DIV;
+	else
+		max_clk_div = 1;
+
+	for (clk_div = 1; clk_div <= max_clk_div; clk_div++) {
+		clk_src = parent_clk / clk_div;
+
+		if (target_speed > I2C_MAX_FAST_MODE_FREQ) {
+			/* Set master code speed register */
+			ret = mtk_i2c_calculate_speed(i2c, clk_src,
+						      I2C_MAX_FAST_MODE_FREQ,
+						      &l_step_cnt,
+						      &l_sample_cnt);
+			if (ret < 0)
+				continue;
+
+			i2c->timing_reg = (l_sample_cnt << 8) | l_step_cnt;
+
+			/* Set the high speed mode register */
+			ret = mtk_i2c_calculate_speed(i2c, clk_src,
+						      target_speed, &step_cnt,
+						      &sample_cnt);
+			if (ret < 0)
+				continue;
+
+			i2c->high_speed_reg = I2C_TIME_DEFAULT_VALUE |
+					(sample_cnt << 12) | (step_cnt << 8);
+
+			if (i2c->dev_comp->ltiming_adjust)
+				i2c->ltiming_reg =
+					(l_sample_cnt << 6) | l_step_cnt |
+					(sample_cnt << 12) | (step_cnt << 9);
+		} else {
+			ret = mtk_i2c_calculate_speed(i2c, clk_src,
+						      target_speed, &l_step_cnt,
+						      &l_sample_cnt);
+			if (ret < 0)
+				continue;
 
-		if (i2c->dev_comp->ltiming_adjust)
-			i2c->ltiming_reg = (l_sample_cnt << 6) | l_step_cnt |
-					   (sample_cnt << 12) | (step_cnt << 9);
-	} else {
-		ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
-					      &step_cnt, &sample_cnt);
-		if (ret < 0)
-			return ret;
+			i2c->timing_reg = (l_sample_cnt << 8) | l_step_cnt;
 
-		i2c->timing_reg = (sample_cnt << 8) | step_cnt;
+			/* Disable the high speed transaction */
+			i2c->high_speed_reg = I2C_TIME_CLR_VALUE;
 
-		/* Disable the high speed transaction */
-		i2c->high_speed_reg = I2C_TIME_CLR_VALUE;
+			if (i2c->dev_comp->ltiming_adjust)
+				i2c->ltiming_reg =
+					(l_sample_cnt << 6) | l_step_cnt;
+		}
 
-		if (i2c->dev_comp->ltiming_adjust)
-			i2c->ltiming_reg = (sample_cnt << 6) | step_cnt;
+		break;
 	}
 
+	i2c->ac_timing.inter_clk_div = clk_div - 1;
+
 	return 0;
 }
 
@@ -586,12 +822,6 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 
 	mtk_i2c_writew(i2c, control_reg, OFFSET_CONTROL);
 
-	/* set start condition */
-	if (i2c->speed_hz <= I2C_MAX_STANDARD_MODE_FREQ)
-		mtk_i2c_writew(i2c, I2C_ST_START_CON, OFFSET_EXT_CONF);
-	else
-		mtk_i2c_writew(i2c, I2C_FS_START_CON, OFFSET_EXT_CONF);
-
 	addr_reg = i2c_8bit_addr_from_msg(msgs);
 	mtk_i2c_writew(i2c, addr_reg, OFFSET_SLAVE_ADDR);
 
@@ -948,9 +1178,6 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 	if (ret)
 		return -EINVAL;
 
-	if (i2c->dev_comp->timing_adjust)
-		i2c->clk_src_div *= I2C_DEFAULT_CLK_DIV;
-
 	if (i2c->have_pmic && !i2c->dev_comp->pmic_i2c)
 		return -EINVAL;
 
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 9b8f1d8552ea..829b8c98ae51 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -877,7 +877,6 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 {
 	struct mv64xxx_i2c_data		*drv_data;
 	struct mv64xxx_i2c_pdata	*pdata = dev_get_platdata(&pd->dev);
-	struct resource	*r;
 	int	rc;
 
 	if ((!pdata && !pd->dev.of_node))
@@ -888,8 +887,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 	if (!drv_data)
 		return -ENOMEM;
 
-	r = platform_get_resource(pd, IORESOURCE_MEM, 0);
-	drv_data->reg_base = devm_ioremap_resource(&pd->dev, r);
+	drv_data->reg_base = devm_platform_ioremap_resource(pd, 0);
 	if (IS_ERR(drv_data->reg_base))
 		return PTR_ERR(drv_data->reg_base);
 
diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
new file mode 100644
index 000000000000..75f07138a6fa
--- /dev/null
+++ b/drivers/i2c/busses/i2c-npcm7xx.c
@@ -0,0 +1,2342 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Nuvoton NPCM7xx I2C Controller driver
+ *
+ * Copyright (C) 2020 Nuvoton Technologies tali.perry@nuvoton.com
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/irq.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+enum i2c_mode {
+	I2C_MASTER,
+	I2C_SLAVE,
+};
+
+/*
+ * External I2C Interface driver xfer indication values, which indicate status
+ * of the bus.
+ */
+enum i2c_state_ind {
+	I2C_NO_STATUS_IND = 0,
+	I2C_SLAVE_RCV_IND,
+	I2C_SLAVE_XMIT_IND,
+	I2C_SLAVE_XMIT_MISSING_DATA_IND,
+	I2C_SLAVE_RESTART_IND,
+	I2C_SLAVE_DONE_IND,
+	I2C_MASTER_DONE_IND,
+	I2C_NACK_IND,
+	I2C_BUS_ERR_IND,
+	I2C_WAKE_UP_IND,
+	I2C_BLOCK_BYTES_ERR_IND,
+	I2C_SLAVE_RCV_MISSING_DATA_IND,
+};
+
+/*
+ * Operation type values (used to define the operation currently running)
+ * module is interrupt driven, on each interrupt the current operation is
+ * checked to see if the module is currently reading or writing.
+ */
+enum i2c_oper {
+	I2C_NO_OPER = 0,
+	I2C_WRITE_OPER,
+	I2C_READ_OPER,
+};
+
+/* I2C Bank (module had 2 banks of registers) */
+enum i2c_bank {
+	I2C_BANK_0 = 0,
+	I2C_BANK_1,
+};
+
+/* Internal I2C states values (for the I2C module state machine). */
+enum i2c_state {
+	I2C_DISABLE = 0,
+	I2C_IDLE,
+	I2C_MASTER_START,
+	I2C_SLAVE_MATCH,
+	I2C_OPER_STARTED,
+	I2C_STOP_PENDING,
+};
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+/* Module supports setting multiple own slave addresses */
+enum i2c_addr {
+	I2C_SLAVE_ADDR1 = 0,
+	I2C_SLAVE_ADDR2,
+	I2C_SLAVE_ADDR3,
+	I2C_SLAVE_ADDR4,
+	I2C_SLAVE_ADDR5,
+	I2C_SLAVE_ADDR6,
+	I2C_SLAVE_ADDR7,
+	I2C_SLAVE_ADDR8,
+	I2C_SLAVE_ADDR9,
+	I2C_SLAVE_ADDR10,
+	I2C_GC_ADDR,
+	I2C_ARP_ADDR,
+};
+#endif
+
+/* init register and default value required to enable module */
+#define NPCM_I2CSEGCTL			0xE4
+#define NPCM_I2CSEGCTL_INIT_VAL		0x0333F000
+
+/* Common regs */
+#define NPCM_I2CSDA			0x00
+#define NPCM_I2CST			0x02
+#define NPCM_I2CCST			0x04
+#define NPCM_I2CCTL1			0x06
+#define NPCM_I2CADDR1			0x08
+#define NPCM_I2CCTL2			0x0A
+#define NPCM_I2CADDR2			0x0C
+#define NPCM_I2CCTL3			0x0E
+#define NPCM_I2CCST2			0x18
+#define NPCM_I2CCST3			0x19
+#define I2C_VER				0x1F
+
+/*BANK0 regs*/
+#define NPCM_I2CADDR3			0x10
+#define NPCM_I2CADDR7			0x11
+#define NPCM_I2CADDR4			0x12
+#define NPCM_I2CADDR8			0x13
+#define NPCM_I2CADDR5			0x14
+#define NPCM_I2CADDR9			0x15
+#define NPCM_I2CADDR6			0x16
+#define NPCM_I2CADDR10			0x17
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+/*
+ * npcm_i2caddr array:
+ * The module supports having multiple own slave addresses.
+ * Since the addr regs are sprinkled all over the address space,
+ * use this array to get the address or each register.
+ */
+#define I2C_NUM_OWN_ADDR 10
+static const int npcm_i2caddr[I2C_NUM_OWN_ADDR] = {
+	NPCM_I2CADDR1, NPCM_I2CADDR2, NPCM_I2CADDR3, NPCM_I2CADDR4,
+	NPCM_I2CADDR5, NPCM_I2CADDR6, NPCM_I2CADDR7, NPCM_I2CADDR8,
+	NPCM_I2CADDR9, NPCM_I2CADDR10,
+};
+#endif
+
+#define NPCM_I2CCTL4			0x1A
+#define NPCM_I2CCTL5			0x1B
+#define NPCM_I2CSCLLT			0x1C /* SCL Low Time */
+#define NPCM_I2CFIF_CTL			0x1D /* FIFO Control */
+#define NPCM_I2CSCLHT			0x1E /* SCL High Time */
+
+/* BANK 1 regs */
+#define NPCM_I2CFIF_CTS			0x10 /* Both FIFOs Control and Status */
+#define NPCM_I2CTXF_CTL			0x12 /* Tx-FIFO Control */
+#define NPCM_I2CT_OUT			0x14 /* Bus T.O. */
+#define NPCM_I2CPEC			0x16 /* PEC Data */
+#define NPCM_I2CTXF_STS			0x1A /* Tx-FIFO Status */
+#define NPCM_I2CRXF_STS			0x1C /* Rx-FIFO Status */
+#define NPCM_I2CRXF_CTL			0x1E /* Rx-FIFO Control */
+
+/* NPCM_I2CST reg fields */
+#define NPCM_I2CST_XMIT			BIT(0)
+#define NPCM_I2CST_MASTER		BIT(1)
+#define NPCM_I2CST_NMATCH		BIT(2)
+#define NPCM_I2CST_STASTR		BIT(3)
+#define NPCM_I2CST_NEGACK		BIT(4)
+#define NPCM_I2CST_BER			BIT(5)
+#define NPCM_I2CST_SDAST		BIT(6)
+#define NPCM_I2CST_SLVSTP		BIT(7)
+
+/* NPCM_I2CCST reg fields */
+#define NPCM_I2CCST_BUSY		BIT(0)
+#define NPCM_I2CCST_BB			BIT(1)
+#define NPCM_I2CCST_MATCH		BIT(2)
+#define NPCM_I2CCST_GCMATCH		BIT(3)
+#define NPCM_I2CCST_TSDA		BIT(4)
+#define NPCM_I2CCST_TGSCL		BIT(5)
+#define NPCM_I2CCST_MATCHAF		BIT(6)
+#define NPCM_I2CCST_ARPMATCH		BIT(7)
+
+/* NPCM_I2CCTL1 reg fields */
+#define NPCM_I2CCTL1_START		BIT(0)
+#define NPCM_I2CCTL1_STOP		BIT(1)
+#define NPCM_I2CCTL1_INTEN		BIT(2)
+#define NPCM_I2CCTL1_EOBINTE		BIT(3)
+#define NPCM_I2CCTL1_ACK		BIT(4)
+#define NPCM_I2CCTL1_GCMEN		BIT(5)
+#define NPCM_I2CCTL1_NMINTE		BIT(6)
+#define NPCM_I2CCTL1_STASTRE		BIT(7)
+
+/* RW1S fields (inside a RW reg): */
+#define NPCM_I2CCTL1_RWS   \
+	(NPCM_I2CCTL1_START | NPCM_I2CCTL1_STOP | NPCM_I2CCTL1_ACK)
+
+/* npcm_i2caddr reg fields */
+#define NPCM_I2CADDR_A			GENMASK(6, 0)
+#define NPCM_I2CADDR_SAEN		BIT(7)
+
+/* NPCM_I2CCTL2 reg fields */
+#define I2CCTL2_ENABLE			BIT(0)
+#define I2CCTL2_SCLFRQ6_0		GENMASK(7, 1)
+
+/* NPCM_I2CCTL3 reg fields */
+#define I2CCTL3_SCLFRQ8_7		GENMASK(1, 0)
+#define I2CCTL3_ARPMEN			BIT(2)
+#define I2CCTL3_IDL_START		BIT(3)
+#define I2CCTL3_400K_MODE		BIT(4)
+#define I2CCTL3_BNK_SEL			BIT(5)
+#define I2CCTL3_SDA_LVL			BIT(6)
+#define I2CCTL3_SCL_LVL			BIT(7)
+
+/* NPCM_I2CCST2 reg fields */
+#define NPCM_I2CCST2_MATCHA1F		BIT(0)
+#define NPCM_I2CCST2_MATCHA2F		BIT(1)
+#define NPCM_I2CCST2_MATCHA3F		BIT(2)
+#define NPCM_I2CCST2_MATCHA4F		BIT(3)
+#define NPCM_I2CCST2_MATCHA5F		BIT(4)
+#define NPCM_I2CCST2_MATCHA6F		BIT(5)
+#define NPCM_I2CCST2_MATCHA7F		BIT(5)
+#define NPCM_I2CCST2_INTSTS		BIT(7)
+
+/* NPCM_I2CCST3 reg fields */
+#define NPCM_I2CCST3_MATCHA8F		BIT(0)
+#define NPCM_I2CCST3_MATCHA9F		BIT(1)
+#define NPCM_I2CCST3_MATCHA10F		BIT(2)
+#define NPCM_I2CCST3_EO_BUSY		BIT(7)
+
+/* NPCM_I2CCTL4 reg fields */
+#define I2CCTL4_HLDT			GENMASK(5, 0)
+#define I2CCTL4_LVL_WE			BIT(7)
+
+/* NPCM_I2CCTL5 reg fields */
+#define I2CCTL5_DBNCT			GENMASK(3, 0)
+
+/* NPCM_I2CFIF_CTS reg fields */
+#define NPCM_I2CFIF_CTS_RXF_TXE		BIT(1)
+#define NPCM_I2CFIF_CTS_RFTE_IE		BIT(3)
+#define NPCM_I2CFIF_CTS_CLR_FIFO	BIT(6)
+#define NPCM_I2CFIF_CTS_SLVRSTR		BIT(7)
+
+/* NPCM_I2CTXF_CTL reg fields */
+#define NPCM_I2CTXF_CTL_TX_THR		GENMASK(4, 0)
+#define NPCM_I2CTXF_CTL_THR_TXIE	BIT(6)
+
+/* NPCM_I2CT_OUT reg fields */
+#define NPCM_I2CT_OUT_TO_CKDIV		GENMASK(5, 0)
+#define NPCM_I2CT_OUT_T_OUTIE		BIT(6)
+#define NPCM_I2CT_OUT_T_OUTST		BIT(7)
+
+/* NPCM_I2CTXF_STS reg fields */
+#define NPCM_I2CTXF_STS_TX_BYTES	GENMASK(4, 0)
+#define NPCM_I2CTXF_STS_TX_THST		BIT(6)
+
+/* NPCM_I2CRXF_STS reg fields */
+#define NPCM_I2CRXF_STS_RX_BYTES	GENMASK(4, 0)
+#define NPCM_I2CRXF_STS_RX_THST		BIT(6)
+
+/* NPCM_I2CFIF_CTL reg fields */
+#define NPCM_I2CFIF_CTL_FIFO_EN		BIT(4)
+
+/* NPCM_I2CRXF_CTL reg fields */
+#define NPCM_I2CRXF_CTL_RX_THR		GENMASK(4, 0)
+#define NPCM_I2CRXF_CTL_LAST_PEC	BIT(5)
+#define NPCM_I2CRXF_CTL_THR_RXIE	BIT(6)
+
+#define I2C_HW_FIFO_SIZE		16
+
+/* I2C_VER reg fields */
+#define I2C_VER_VERSION			GENMASK(6, 0)
+#define I2C_VER_FIFO_EN			BIT(7)
+
+/* stall/stuck timeout in us */
+#define DEFAULT_STALL_COUNT		25
+
+/* SCLFRQ field position */
+#define SCLFRQ_0_TO_6			GENMASK(6, 0)
+#define SCLFRQ_7_TO_8			GENMASK(8, 7)
+
+/* supported clk settings. values in Hz. */
+#define I2C_FREQ_MIN_HZ			10000
+#define I2C_FREQ_MAX_HZ			I2C_MAX_FAST_MODE_PLUS_FREQ
+
+/* Status of one I2C module */
+struct npcm_i2c {
+	struct i2c_adapter adap;
+	struct device *dev;
+	unsigned char __iomem *reg;
+	spinlock_t lock;   /* IRQ synchronization */
+	struct completion cmd_complete;
+	int cmd_err;
+	struct i2c_msg *msgs;
+	int msgs_num;
+	int num;
+	u32 apb_clk;
+	struct i2c_bus_recovery_info rinfo;
+	enum i2c_state state;
+	enum i2c_oper operation;
+	enum i2c_mode master_or_slave;
+	enum i2c_state_ind stop_ind;
+	u8 dest_addr;
+	u8 *rd_buf;
+	u16 rd_size;
+	u16 rd_ind;
+	u8 *wr_buf;
+	u16 wr_size;
+	u16 wr_ind;
+	bool fifo_use;
+	u16 PEC_mask; /* PEC bit mask per slave address */
+	bool PEC_use;
+	bool read_block_use;
+	unsigned long int_time_stamp;
+	unsigned long bus_freq; /* in Hz */
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	u8 own_slave_addr;
+	struct i2c_client *slave;
+	int slv_rd_size;
+	int slv_rd_ind;
+	int slv_wr_size;
+	int slv_wr_ind;
+	u8 slv_rd_buf[I2C_HW_FIFO_SIZE];
+	u8 slv_wr_buf[I2C_HW_FIFO_SIZE];
+#endif
+	struct dentry *debugfs; /* debugfs device directory */
+	u64 ber_cnt;
+	u64 rec_succ_cnt;
+	u64 rec_fail_cnt;
+	u64 nack_cnt;
+	u64 timeout_cnt;
+};
+
+static inline void npcm_i2c_select_bank(struct npcm_i2c *bus,
+					enum i2c_bank bank)
+{
+	u8 i2cctl3 = ioread8(bus->reg + NPCM_I2CCTL3);
+
+	if (bank == I2C_BANK_0)
+		i2cctl3 = i2cctl3 & ~I2CCTL3_BNK_SEL;
+	else
+		i2cctl3 = i2cctl3 | I2CCTL3_BNK_SEL;
+	iowrite8(i2cctl3, bus->reg + NPCM_I2CCTL3);
+}
+
+static void npcm_i2c_init_params(struct npcm_i2c *bus)
+{
+	bus->stop_ind = I2C_NO_STATUS_IND;
+	bus->rd_size = 0;
+	bus->wr_size = 0;
+	bus->rd_ind = 0;
+	bus->wr_ind = 0;
+	bus->read_block_use = false;
+	bus->int_time_stamp = 0;
+	bus->PEC_use = false;
+	bus->PEC_mask = 0;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	if (bus->slave)
+		bus->master_or_slave = I2C_SLAVE;
+#endif
+}
+
+static inline void npcm_i2c_wr_byte(struct npcm_i2c *bus, u8 data)
+{
+	iowrite8(data, bus->reg + NPCM_I2CSDA);
+}
+
+static inline u8 npcm_i2c_rd_byte(struct npcm_i2c *bus)
+{
+	return ioread8(bus->reg + NPCM_I2CSDA);
+}
+
+static int npcm_i2c_get_SCL(struct i2c_adapter *_adap)
+{
+	struct npcm_i2c *bus = container_of(_adap, struct npcm_i2c, adap);
+
+	return !!(I2CCTL3_SCL_LVL & ioread32(bus->reg + NPCM_I2CCTL3));
+}
+
+static int npcm_i2c_get_SDA(struct i2c_adapter *_adap)
+{
+	struct npcm_i2c *bus = container_of(_adap, struct npcm_i2c, adap);
+
+	return !!(I2CCTL3_SDA_LVL & ioread32(bus->reg + NPCM_I2CCTL3));
+}
+
+static inline u16 npcm_i2c_get_index(struct npcm_i2c *bus)
+{
+	if (bus->operation == I2C_READ_OPER)
+		return bus->rd_ind;
+	if (bus->operation == I2C_WRITE_OPER)
+		return bus->wr_ind;
+	return 0;
+}
+
+/* quick protocol (just address) */
+static inline bool npcm_i2c_is_quick(struct npcm_i2c *bus)
+{
+	return bus->wr_size == 0 && bus->rd_size == 0;
+}
+
+static void npcm_i2c_disable(struct npcm_i2c *bus)
+{
+	u8 i2cctl2;
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	int i;
+
+	/* select bank 0 for I2C addresses */
+	npcm_i2c_select_bank(bus, I2C_BANK_0);
+
+	/* Slave addresses removal */
+	for (i = I2C_SLAVE_ADDR1; i < I2C_NUM_OWN_ADDR; i++)
+		iowrite8(0, bus->reg + npcm_i2caddr[i]);
+
+	npcm_i2c_select_bank(bus, I2C_BANK_1);
+#endif
+	/* Disable module */
+	i2cctl2 = ioread8(bus->reg + NPCM_I2CCTL2);
+	i2cctl2 = i2cctl2 & ~I2CCTL2_ENABLE;
+	iowrite8(i2cctl2, bus->reg + NPCM_I2CCTL2);
+
+	bus->state = I2C_DISABLE;
+}
+
+static void npcm_i2c_enable(struct npcm_i2c *bus)
+{
+	u8 i2cctl2 = ioread8(bus->reg + NPCM_I2CCTL2);
+
+	i2cctl2 = i2cctl2 | I2CCTL2_ENABLE;
+	iowrite8(i2cctl2, bus->reg + NPCM_I2CCTL2);
+	bus->state = I2C_IDLE;
+}
+
+/* enable\disable end of busy (EOB) interrupts */
+static inline void npcm_i2c_eob_int(struct npcm_i2c *bus, bool enable)
+{
+	u8 val;
+
+	/* Clear EO_BUSY pending bit: */
+	val = ioread8(bus->reg + NPCM_I2CCST3);
+	val = val | NPCM_I2CCST3_EO_BUSY;
+	iowrite8(val, bus->reg + NPCM_I2CCST3);
+
+	val = ioread8(bus->reg + NPCM_I2CCTL1);
+	val &= ~NPCM_I2CCTL1_RWS;
+	if (enable)
+		val |= NPCM_I2CCTL1_EOBINTE;
+	else
+		val &= ~NPCM_I2CCTL1_EOBINTE;
+	iowrite8(val, bus->reg + NPCM_I2CCTL1);
+}
+
+static inline bool npcm_i2c_tx_fifo_empty(struct npcm_i2c *bus)
+{
+	u8 tx_fifo_sts;
+
+	tx_fifo_sts = ioread8(bus->reg + NPCM_I2CTXF_STS);
+	/* check if TX FIFO is not empty */
+	if ((tx_fifo_sts & NPCM_I2CTXF_STS_TX_BYTES) == 0)
+		return false;
+
+	/* check if TX FIFO status bit is set: */
+	return !!FIELD_GET(NPCM_I2CTXF_STS_TX_THST, tx_fifo_sts);
+}
+
+static inline bool npcm_i2c_rx_fifo_full(struct npcm_i2c *bus)
+{
+	u8 rx_fifo_sts;
+
+	rx_fifo_sts = ioread8(bus->reg + NPCM_I2CRXF_STS);
+	/* check if RX FIFO is not empty: */
+	if ((rx_fifo_sts & NPCM_I2CRXF_STS_RX_BYTES) == 0)
+		return false;
+
+	/* check if rx fifo full status is set: */
+	return !!FIELD_GET(NPCM_I2CRXF_STS_RX_THST, rx_fifo_sts);
+}
+
+static inline void npcm_i2c_clear_fifo_int(struct npcm_i2c *bus)
+{
+	u8 val;
+
+	val = ioread8(bus->reg + NPCM_I2CFIF_CTS);
+	val = (val & NPCM_I2CFIF_CTS_SLVRSTR) | NPCM_I2CFIF_CTS_RXF_TXE;
+	iowrite8(val, bus->reg + NPCM_I2CFIF_CTS);
+}
+
+static inline void npcm_i2c_clear_tx_fifo(struct npcm_i2c *bus)
+{
+	u8 val;
+
+	val = ioread8(bus->reg + NPCM_I2CTXF_STS);
+	val = val | NPCM_I2CTXF_STS_TX_THST;
+	iowrite8(val, bus->reg + NPCM_I2CTXF_STS);
+}
+
+static inline void npcm_i2c_clear_rx_fifo(struct npcm_i2c *bus)
+{
+	u8 val;
+
+	val = ioread8(bus->reg + NPCM_I2CRXF_STS);
+	val = val | NPCM_I2CRXF_STS_RX_THST;
+	iowrite8(val, bus->reg + NPCM_I2CRXF_STS);
+}
+
+static void npcm_i2c_int_enable(struct npcm_i2c *bus, bool enable)
+{
+	u8 val;
+
+	val = ioread8(bus->reg + NPCM_I2CCTL1);
+	val &= ~NPCM_I2CCTL1_RWS;
+	if (enable)
+		val |= NPCM_I2CCTL1_INTEN;
+	else
+		val &= ~NPCM_I2CCTL1_INTEN;
+	iowrite8(val, bus->reg + NPCM_I2CCTL1);
+}
+
+static inline void npcm_i2c_master_start(struct npcm_i2c *bus)
+{
+	u8 val;
+
+	val = ioread8(bus->reg + NPCM_I2CCTL1);
+	val &= ~(NPCM_I2CCTL1_STOP | NPCM_I2CCTL1_ACK);
+	val |= NPCM_I2CCTL1_START;
+	iowrite8(val, bus->reg + NPCM_I2CCTL1);
+}
+
+static inline void npcm_i2c_master_stop(struct npcm_i2c *bus)
+{
+	u8 val;
+
+	/*
+	 * override HW issue: I2C may fail to supply stop condition in Master
+	 * Write operation.
+	 * Need to delay at least 5 us from the last int, before issueing a stop
+	 */
+	udelay(10); /* function called from interrupt, can't sleep */
+	val = ioread8(bus->reg + NPCM_I2CCTL1);
+	val &= ~(NPCM_I2CCTL1_START | NPCM_I2CCTL1_ACK);
+	val |= NPCM_I2CCTL1_STOP;
+	iowrite8(val, bus->reg + NPCM_I2CCTL1);
+
+	if (!bus->fifo_use)
+		return;
+
+	npcm_i2c_select_bank(bus, I2C_BANK_1);
+
+	if (bus->operation == I2C_READ_OPER)
+		npcm_i2c_clear_rx_fifo(bus);
+	else
+		npcm_i2c_clear_tx_fifo(bus);
+	npcm_i2c_clear_fifo_int(bus);
+	iowrite8(0, bus->reg + NPCM_I2CTXF_CTL);
+}
+
+static inline void npcm_i2c_stall_after_start(struct npcm_i2c *bus, bool stall)
+{
+	u8 val;
+
+	val = ioread8(bus->reg + NPCM_I2CCTL1);
+	val &= ~NPCM_I2CCTL1_RWS;
+	if (stall)
+		val |= NPCM_I2CCTL1_STASTRE;
+	else
+		val &= ~NPCM_I2CCTL1_STASTRE;
+	iowrite8(val, bus->reg + NPCM_I2CCTL1);
+}
+
+static inline void npcm_i2c_nack(struct npcm_i2c *bus)
+{
+	u8 val;
+
+	val = ioread8(bus->reg + NPCM_I2CCTL1);
+	val &= ~(NPCM_I2CCTL1_STOP | NPCM_I2CCTL1_START);
+	val |= NPCM_I2CCTL1_ACK;
+	iowrite8(val, bus->reg + NPCM_I2CCTL1);
+}
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static void npcm_i2c_slave_int_enable(struct npcm_i2c *bus, bool enable)
+{
+	u8 i2cctl1;
+
+	/* enable interrupt on slave match: */
+	i2cctl1 = ioread8(bus->reg + NPCM_I2CCTL1);
+	i2cctl1 &= ~NPCM_I2CCTL1_RWS;
+	if (enable)
+		i2cctl1 |= NPCM_I2CCTL1_NMINTE;
+	else
+		i2cctl1 &= ~NPCM_I2CCTL1_NMINTE;
+	iowrite8(i2cctl1, bus->reg + NPCM_I2CCTL1);
+}
+
+static int npcm_i2c_slave_enable(struct npcm_i2c *bus, enum i2c_addr addr_type,
+				 u8 addr, bool enable)
+{
+	u8 i2cctl1;
+	u8 i2cctl3;
+	u8 sa_reg;
+
+	sa_reg = (addr & 0x7F) | FIELD_PREP(NPCM_I2CADDR_SAEN, enable);
+	if (addr_type == I2C_GC_ADDR) {
+		i2cctl1 = ioread8(bus->reg + NPCM_I2CCTL1);
+		if (enable)
+			i2cctl1 |= NPCM_I2CCTL1_GCMEN;
+		else
+			i2cctl1 &= ~NPCM_I2CCTL1_GCMEN;
+		iowrite8(i2cctl1, bus->reg + NPCM_I2CCTL1);
+		return 0;
+	}
+	if (addr_type == I2C_ARP_ADDR) {
+		i2cctl3 = ioread8(bus->reg + NPCM_I2CCTL3);
+		if (enable)
+			i2cctl3 |= I2CCTL3_ARPMEN;
+		else
+			i2cctl3 &= ~I2CCTL3_ARPMEN;
+		iowrite8(i2cctl3, bus->reg + NPCM_I2CCTL3);
+		return 0;
+	}
+	if (addr_type >= I2C_ARP_ADDR)
+		return -EFAULT;
+	/* select bank 0 for address 3 to 10 */
+	if (addr_type > I2C_SLAVE_ADDR2)
+		npcm_i2c_select_bank(bus, I2C_BANK_0);
+	/* Set and enable the address */
+	iowrite8(sa_reg, bus->reg + npcm_i2caddr[addr_type]);
+	npcm_i2c_slave_int_enable(bus, enable);
+	if (addr_type > I2C_SLAVE_ADDR2)
+		npcm_i2c_select_bank(bus, I2C_BANK_1);
+	return 0;
+}
+#endif
+
+static void npcm_i2c_reset(struct npcm_i2c *bus)
+{
+	/*
+	 * Save I2CCTL1 relevant bits. It is being cleared when the module
+	 *  is disabled.
+	 */
+	u8 i2cctl1;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	u8 addr;
+#endif
+
+	i2cctl1 = ioread8(bus->reg + NPCM_I2CCTL1);
+
+	npcm_i2c_disable(bus);
+	npcm_i2c_enable(bus);
+
+	/* Restore NPCM_I2CCTL1 Status */
+	i2cctl1 &= ~NPCM_I2CCTL1_RWS;
+	iowrite8(i2cctl1, bus->reg + NPCM_I2CCTL1);
+
+	/* Clear BB (BUS BUSY) bit */
+	iowrite8(NPCM_I2CCST_BB, bus->reg + NPCM_I2CCST);
+	iowrite8(0xFF, bus->reg + NPCM_I2CST);
+
+	/* Clear EOB bit */
+	iowrite8(NPCM_I2CCST3_EO_BUSY, bus->reg + NPCM_I2CCST3);
+
+	/* Clear all fifo bits: */
+	iowrite8(NPCM_I2CFIF_CTS_CLR_FIFO, bus->reg + NPCM_I2CFIF_CTS);
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	if (bus->slave) {
+		addr = bus->slave->addr;
+		npcm_i2c_slave_enable(bus, I2C_SLAVE_ADDR1, addr, true);
+	}
+#endif
+
+	bus->state = I2C_IDLE;
+}
+
+static inline bool npcm_i2c_is_master(struct npcm_i2c *bus)
+{
+	return !!FIELD_GET(NPCM_I2CST_MASTER, ioread8(bus->reg + NPCM_I2CST));
+}
+
+static void npcm_i2c_callback(struct npcm_i2c *bus,
+			      enum i2c_state_ind op_status, u16 info)
+{
+	struct i2c_msg *msgs;
+	int msgs_num;
+
+	msgs = bus->msgs;
+	msgs_num = bus->msgs_num;
+	/*
+	 * check that transaction was not timed-out, and msgs still
+	 * holds a valid value.
+	 */
+	if (!msgs)
+		return;
+
+	if (completion_done(&bus->cmd_complete))
+		return;
+
+	switch (op_status) {
+	case I2C_MASTER_DONE_IND:
+		bus->cmd_err = bus->msgs_num;
+		fallthrough;
+	case I2C_BLOCK_BYTES_ERR_IND:
+		/* Master tx finished and all transmit bytes were sent */
+		if (bus->msgs) {
+			if (msgs[0].flags & I2C_M_RD)
+				msgs[0].len = info;
+			else if (msgs_num == 2 &&
+				 msgs[1].flags & I2C_M_RD)
+				msgs[1].len = info;
+		}
+		if (completion_done(&bus->cmd_complete) == false)
+			complete(&bus->cmd_complete);
+	break;
+
+	case I2C_NACK_IND:
+		/* MASTER transmit got a NACK before tx all bytes */
+		bus->cmd_err = -ENXIO;
+		if (bus->master_or_slave == I2C_MASTER)
+			complete(&bus->cmd_complete);
+
+		break;
+	case I2C_BUS_ERR_IND:
+		/* Bus error */
+		bus->cmd_err = -EAGAIN;
+		if (bus->master_or_slave == I2C_MASTER)
+			complete(&bus->cmd_complete);
+
+		break;
+	case I2C_WAKE_UP_IND:
+		/* I2C wake up */
+		break;
+	default:
+		break;
+	}
+
+	bus->operation = I2C_NO_OPER;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	if (bus->slave)
+		bus->master_or_slave = I2C_SLAVE;
+#endif
+}
+
+static u8 npcm_i2c_fifo_usage(struct npcm_i2c *bus)
+{
+	if (bus->operation == I2C_WRITE_OPER)
+		return FIELD_GET(NPCM_I2CTXF_STS_TX_BYTES,
+				 ioread8(bus->reg + NPCM_I2CTXF_STS));
+	if (bus->operation == I2C_READ_OPER)
+		return FIELD_GET(NPCM_I2CRXF_STS_RX_BYTES,
+				 ioread8(bus->reg + NPCM_I2CRXF_STS));
+	return 0;
+}
+
+static void npcm_i2c_write_to_fifo_master(struct npcm_i2c *bus, u16 max_bytes)
+{
+	u8 size_free_fifo;
+
+	/*
+	 * Fill the FIFO, while the FIFO is not full and there are more bytes
+	 * to write
+	 */
+	size_free_fifo = I2C_HW_FIFO_SIZE - npcm_i2c_fifo_usage(bus);
+	while (max_bytes-- && size_free_fifo) {
+		if (bus->wr_ind < bus->wr_size)
+			npcm_i2c_wr_byte(bus, bus->wr_buf[bus->wr_ind++]);
+		else
+			npcm_i2c_wr_byte(bus, 0xFF);
+		size_free_fifo = I2C_HW_FIFO_SIZE - npcm_i2c_fifo_usage(bus);
+	}
+}
+
+/*
+ * npcm_i2c_set_fifo:
+ * configure the FIFO before using it. If nread is -1 RX FIFO will not be
+ * configured. same for nwrite
+ */
+static void npcm_i2c_set_fifo(struct npcm_i2c *bus, int nread, int nwrite)
+{
+	u8 rxf_ctl = 0;
+
+	if (!bus->fifo_use)
+		return;
+	npcm_i2c_select_bank(bus, I2C_BANK_1);
+	npcm_i2c_clear_tx_fifo(bus);
+	npcm_i2c_clear_rx_fifo(bus);
+
+	/* configure RX FIFO */
+	if (nread > 0) {
+		rxf_ctl = min_t(int, nread, I2C_HW_FIFO_SIZE);
+
+		/* set LAST bit. if LAST is set next FIFO packet is nacked */
+		if (nread <= I2C_HW_FIFO_SIZE)
+			rxf_ctl |= NPCM_I2CRXF_CTL_LAST_PEC;
+
+		/*
+		 * if we are about to read the first byte in blk rd mode,
+		 * don't NACK it. If slave returns zero size HW can't NACK
+		 * it immidiattly, it will read extra byte and then NACK.
+		 */
+		if (bus->rd_ind == 0 && bus->read_block_use) {
+			/* set fifo to read one byte, no last: */
+			rxf_ctl = 1;
+		}
+
+		/* set fifo size: */
+		iowrite8(rxf_ctl, bus->reg + NPCM_I2CRXF_CTL);
+	}
+
+	/* configure TX FIFO */
+	if (nwrite > 0) {
+		if (nwrite > I2C_HW_FIFO_SIZE)
+			/* data to send is more then FIFO size. */
+			iowrite8(I2C_HW_FIFO_SIZE, bus->reg + NPCM_I2CTXF_CTL);
+		else
+			iowrite8(nwrite, bus->reg + NPCM_I2CTXF_CTL);
+
+		npcm_i2c_clear_tx_fifo(bus);
+	}
+}
+
+static void npcm_i2c_read_fifo(struct npcm_i2c *bus, u8 bytes_in_fifo)
+{
+	u8 data;
+
+	while (bytes_in_fifo--) {
+		data = npcm_i2c_rd_byte(bus);
+		if (bus->rd_ind < bus->rd_size)
+			bus->rd_buf[bus->rd_ind++] = data;
+	}
+}
+
+static inline void npcm_i2c_clear_master_status(struct npcm_i2c *bus)
+{
+	u8 val;
+
+	/* Clear NEGACK, STASTR and BER bits */
+	val = NPCM_I2CST_BER | NPCM_I2CST_NEGACK | NPCM_I2CST_STASTR;
+	iowrite8(val, bus->reg + NPCM_I2CST);
+}
+
+static void npcm_i2c_master_abort(struct npcm_i2c *bus)
+{
+	/* Only current master is allowed to issue a stop condition */
+	if (!npcm_i2c_is_master(bus))
+		return;
+
+	npcm_i2c_eob_int(bus, true);
+	npcm_i2c_master_stop(bus);
+	npcm_i2c_clear_master_status(bus);
+}
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static u8 npcm_i2c_get_slave_addr(struct npcm_i2c *bus, enum i2c_addr addr_type)
+{
+	u8 slave_add;
+
+	/* select bank 0 for address 3 to 10 */
+	if (addr_type > I2C_SLAVE_ADDR2)
+		npcm_i2c_select_bank(bus, I2C_BANK_0);
+
+	slave_add = ioread8(bus->reg + npcm_i2caddr[(int)addr_type]);
+
+	if (addr_type > I2C_SLAVE_ADDR2)
+		npcm_i2c_select_bank(bus, I2C_BANK_1);
+
+	return slave_add;
+}
+
+static int npcm_i2c_remove_slave_addr(struct npcm_i2c *bus, u8 slave_add)
+{
+	int i;
+
+	/* Set the enable bit */
+	slave_add |= 0x80;
+	npcm_i2c_select_bank(bus, I2C_BANK_0);
+	for (i = I2C_SLAVE_ADDR1; i < I2C_NUM_OWN_ADDR; i++) {
+		if (ioread8(bus->reg + npcm_i2caddr[i]) == slave_add)
+			iowrite8(0, bus->reg + npcm_i2caddr[i]);
+	}
+	npcm_i2c_select_bank(bus, I2C_BANK_1);
+	return 0;
+}
+
+static void npcm_i2c_write_fifo_slave(struct npcm_i2c *bus, u16 max_bytes)
+{
+	/*
+	 * Fill the FIFO, while the FIFO is not full and there are more bytes
+	 * to write
+	 */
+	npcm_i2c_clear_fifo_int(bus);
+	npcm_i2c_clear_tx_fifo(bus);
+	iowrite8(0, bus->reg + NPCM_I2CTXF_CTL);
+	while (max_bytes-- && I2C_HW_FIFO_SIZE != npcm_i2c_fifo_usage(bus)) {
+		if (bus->slv_wr_size <= 0)
+			break;
+		bus->slv_wr_ind = bus->slv_wr_ind % I2C_HW_FIFO_SIZE;
+		npcm_i2c_wr_byte(bus, bus->slv_wr_buf[bus->slv_wr_ind]);
+		bus->slv_wr_ind++;
+		bus->slv_wr_ind = bus->slv_wr_ind % I2C_HW_FIFO_SIZE;
+		bus->slv_wr_size--;
+	}
+}
+
+static void npcm_i2c_read_fifo_slave(struct npcm_i2c *bus, u8 bytes_in_fifo)
+{
+	u8 data;
+
+	if (!bus->slave)
+		return;
+
+	while (bytes_in_fifo--) {
+		data = npcm_i2c_rd_byte(bus);
+
+		bus->slv_rd_ind = bus->slv_rd_ind % I2C_HW_FIFO_SIZE;
+		bus->slv_rd_buf[bus->slv_rd_ind] = data;
+		bus->slv_rd_ind++;
+
+		/* 1st byte is length in block protocol: */
+		if (bus->slv_rd_ind == 1 && bus->read_block_use)
+			bus->slv_rd_size = data + bus->PEC_use + 1;
+	}
+}
+
+static int npcm_i2c_slave_get_wr_buf(struct npcm_i2c *bus)
+{
+	int i;
+	u8 value;
+	int ind;
+	int ret = bus->slv_wr_ind;
+
+	/* fill a cyclic buffer */
+	for (i = 0; i < I2C_HW_FIFO_SIZE; i++) {
+		if (bus->slv_wr_size >= I2C_HW_FIFO_SIZE)
+			break;
+		i2c_slave_event(bus->slave, I2C_SLAVE_READ_REQUESTED, &value);
+		ind = (bus->slv_wr_ind + bus->slv_wr_size) % I2C_HW_FIFO_SIZE;
+		bus->slv_wr_buf[ind] = value;
+		bus->slv_wr_size++;
+		i2c_slave_event(bus->slave, I2C_SLAVE_READ_PROCESSED, &value);
+	}
+	return I2C_HW_FIFO_SIZE - ret;
+}
+
+static void npcm_i2c_slave_send_rd_buf(struct npcm_i2c *bus)
+{
+	int i;
+
+	for (i = 0; i < bus->slv_rd_ind; i++)
+		i2c_slave_event(bus->slave, I2C_SLAVE_WRITE_RECEIVED,
+				&bus->slv_rd_buf[i]);
+	/*
+	 * once we send bytes up, need to reset the counter of the wr buf
+	 * got data from master (new offset in device), ignore wr fifo:
+	 */
+	if (bus->slv_rd_ind) {
+		bus->slv_wr_size = 0;
+		bus->slv_wr_ind = 0;
+	}
+
+	bus->slv_rd_ind = 0;
+	bus->slv_rd_size = bus->adap.quirks->max_read_len;
+
+	npcm_i2c_clear_fifo_int(bus);
+	npcm_i2c_clear_rx_fifo(bus);
+}
+
+static void npcm_i2c_slave_receive(struct npcm_i2c *bus, u16 nread,
+				   u8 *read_data)
+{
+	bus->state = I2C_OPER_STARTED;
+	bus->operation = I2C_READ_OPER;
+	bus->slv_rd_size = nread;
+	bus->slv_rd_ind = 0;
+
+	iowrite8(0, bus->reg + NPCM_I2CTXF_CTL);
+	iowrite8(I2C_HW_FIFO_SIZE, bus->reg + NPCM_I2CRXF_CTL);
+	npcm_i2c_clear_tx_fifo(bus);
+	npcm_i2c_clear_rx_fifo(bus);
+}
+
+static void npcm_i2c_slave_xmit(struct npcm_i2c *bus, u16 nwrite,
+				u8 *write_data)
+{
+	if (nwrite == 0)
+		return;
+
+	bus->state = I2C_OPER_STARTED;
+	bus->operation = I2C_WRITE_OPER;
+
+	/* get the next buffer */
+	npcm_i2c_slave_get_wr_buf(bus);
+	npcm_i2c_write_fifo_slave(bus, nwrite);
+}
+
+/*
+ * npcm_i2c_slave_wr_buf_sync:
+ * currently slave IF only supports single byte operations.
+ * in order to utilyze the npcm HW FIFO, the driver will ask for 16 bytes
+ * at a time, pack them in buffer, and then transmit them all together
+ * to the FIFO and onward to the bus.
+ * NACK on read will be once reached to bus->adap->quirks->max_read_len.
+ * sending a NACK wherever the backend requests for it is not supported.
+ * the next two functions allow reading to local buffer before writing it all
+ * to the HW FIFO.
+ */
+static void npcm_i2c_slave_wr_buf_sync(struct npcm_i2c *bus)
+{
+	int left_in_fifo;
+
+	left_in_fifo = FIELD_GET(NPCM_I2CTXF_STS_TX_BYTES,
+				 ioread8(bus->reg + NPCM_I2CTXF_STS));
+
+	/* fifo already full: */
+	if (left_in_fifo >= I2C_HW_FIFO_SIZE ||
+	    bus->slv_wr_size >= I2C_HW_FIFO_SIZE)
+		return;
+
+	/* update the wr fifo index back to the untransmitted bytes: */
+	bus->slv_wr_ind = bus->slv_wr_ind - left_in_fifo;
+	bus->slv_wr_size = bus->slv_wr_size + left_in_fifo;
+
+	if (bus->slv_wr_ind < 0)
+		bus->slv_wr_ind += I2C_HW_FIFO_SIZE;
+}
+
+static void npcm_i2c_slave_rd_wr(struct npcm_i2c *bus)
+{
+	if (NPCM_I2CST_XMIT & ioread8(bus->reg + NPCM_I2CST)) {
+		/*
+		 * Slave got an address match with direction bit 1 so it should
+		 * transmit data. Write till the master will NACK
+		 */
+		bus->operation = I2C_WRITE_OPER;
+		npcm_i2c_slave_xmit(bus, bus->adap.quirks->max_write_len,
+				    bus->slv_wr_buf);
+	} else {
+		/*
+		 * Slave got an address match with direction bit 0 so it should
+		 * receive data.
+		 * this module does not support saying no to bytes.
+		 * it will always ACK.
+		 */
+		bus->operation = I2C_READ_OPER;
+		npcm_i2c_read_fifo_slave(bus, npcm_i2c_fifo_usage(bus));
+		bus->stop_ind = I2C_SLAVE_RCV_IND;
+		npcm_i2c_slave_send_rd_buf(bus);
+		npcm_i2c_slave_receive(bus, bus->adap.quirks->max_read_len,
+				       bus->slv_rd_buf);
+	}
+}
+
+static irqreturn_t npcm_i2c_int_slave_handler(struct npcm_i2c *bus)
+{
+	u8 val;
+	irqreturn_t ret = IRQ_NONE;
+	u8 i2cst = ioread8(bus->reg + NPCM_I2CST);
+
+	/* Slave: A NACK has occurred */
+	if (NPCM_I2CST_NEGACK & i2cst) {
+		bus->stop_ind = I2C_NACK_IND;
+		npcm_i2c_slave_wr_buf_sync(bus);
+		if (bus->fifo_use)
+			/* clear the FIFO */
+			iowrite8(NPCM_I2CFIF_CTS_CLR_FIFO,
+				 bus->reg + NPCM_I2CFIF_CTS);
+
+		/* In slave write, NACK is OK, otherwise it is a problem */
+		bus->stop_ind = I2C_NO_STATUS_IND;
+		bus->operation = I2C_NO_OPER;
+		bus->own_slave_addr = 0xFF;
+
+		/*
+		 * Slave has to wait for STOP to decide this is the end
+		 * of the transaction. tx is not yet considered as done
+		 */
+		iowrite8(NPCM_I2CST_NEGACK, bus->reg + NPCM_I2CST);
+
+		ret = IRQ_HANDLED;
+	}
+
+	/* Slave mode: a Bus Error (BER) has been identified */
+	if (NPCM_I2CST_BER & i2cst) {
+		/*
+		 * Check whether bus arbitration or Start or Stop during data
+		 * xfer bus arbitration problem should not result in recovery
+		 */
+		bus->stop_ind = I2C_BUS_ERR_IND;
+
+		/* wait for bus busy before clear fifo */
+		iowrite8(NPCM_I2CFIF_CTS_CLR_FIFO, bus->reg + NPCM_I2CFIF_CTS);
+
+		bus->state = I2C_IDLE;
+
+		/*
+		 * in BER case we might get 2 interrupts: one for slave one for
+		 * master ( for a channel which is master\slave switching)
+		 */
+		if (completion_done(&bus->cmd_complete) == false) {
+			bus->cmd_err = -EIO;
+			complete(&bus->cmd_complete);
+		}
+		bus->own_slave_addr = 0xFF;
+		iowrite8(NPCM_I2CST_BER, bus->reg + NPCM_I2CST);
+		ret = IRQ_HANDLED;
+	}
+
+	/* A Slave Stop Condition has been identified */
+	if (NPCM_I2CST_SLVSTP & i2cst) {
+		u8 bytes_in_fifo = npcm_i2c_fifo_usage(bus);
+
+		bus->stop_ind = I2C_SLAVE_DONE_IND;
+
+		if (bus->operation == I2C_READ_OPER)
+			npcm_i2c_read_fifo_slave(bus, bytes_in_fifo);
+
+		/* if the buffer is empty nothing will be sent */
+		npcm_i2c_slave_send_rd_buf(bus);
+
+		/* Slave done transmitting or receiving */
+		bus->stop_ind = I2C_NO_STATUS_IND;
+
+		/*
+		 * Note, just because we got here, it doesn't mean we through
+		 * away the wr buffer.
+		 * we keep it until the next received offset.
+		 */
+		bus->operation = I2C_NO_OPER;
+		bus->own_slave_addr = 0xFF;
+		i2c_slave_event(bus->slave, I2C_SLAVE_STOP, 0);
+		iowrite8(NPCM_I2CST_SLVSTP, bus->reg + NPCM_I2CST);
+		if (bus->fifo_use) {
+			npcm_i2c_clear_fifo_int(bus);
+			npcm_i2c_clear_rx_fifo(bus);
+			npcm_i2c_clear_tx_fifo(bus);
+
+			iowrite8(NPCM_I2CFIF_CTS_CLR_FIFO,
+				 bus->reg + NPCM_I2CFIF_CTS);
+		}
+		bus->state = I2C_IDLE;
+		ret = IRQ_HANDLED;
+	}
+
+	/* restart condition occurred and Rx-FIFO was not empty */
+	if (bus->fifo_use && FIELD_GET(NPCM_I2CFIF_CTS_SLVRSTR,
+				       ioread8(bus->reg + NPCM_I2CFIF_CTS))) {
+		bus->stop_ind = I2C_SLAVE_RESTART_IND;
+		bus->master_or_slave = I2C_SLAVE;
+		if (bus->operation == I2C_READ_OPER)
+			npcm_i2c_read_fifo_slave(bus, npcm_i2c_fifo_usage(bus));
+		bus->operation = I2C_WRITE_OPER;
+		iowrite8(0, bus->reg + NPCM_I2CRXF_CTL);
+		val = NPCM_I2CFIF_CTS_CLR_FIFO | NPCM_I2CFIF_CTS_SLVRSTR |
+		      NPCM_I2CFIF_CTS_RXF_TXE;
+		iowrite8(val, bus->reg + NPCM_I2CFIF_CTS);
+		npcm_i2c_slave_rd_wr(bus);
+		ret = IRQ_HANDLED;
+	}
+
+	/* A Slave Address Match has been identified */
+	if (NPCM_I2CST_NMATCH & i2cst) {
+		u8 info = 0;
+
+		/* Address match automatically implies slave mode */
+		bus->master_or_slave = I2C_SLAVE;
+		npcm_i2c_clear_fifo_int(bus);
+		npcm_i2c_clear_rx_fifo(bus);
+		npcm_i2c_clear_tx_fifo(bus);
+		iowrite8(0, bus->reg + NPCM_I2CTXF_CTL);
+		iowrite8(I2C_HW_FIFO_SIZE, bus->reg + NPCM_I2CRXF_CTL);
+		if (NPCM_I2CST_XMIT & i2cst) {
+			bus->operation = I2C_WRITE_OPER;
+		} else {
+			i2c_slave_event(bus->slave, I2C_SLAVE_WRITE_REQUESTED,
+					&info);
+			bus->operation = I2C_READ_OPER;
+		}
+		if (bus->own_slave_addr == 0xFF) {
+			/* Check which type of address match */
+			val = ioread8(bus->reg + NPCM_I2CCST);
+			if (NPCM_I2CCST_MATCH & val) {
+				u16 addr;
+				enum i2c_addr eaddr;
+				u8 i2ccst2;
+				u8 i2ccst3;
+
+				i2ccst3 = ioread8(bus->reg + NPCM_I2CCST3);
+				i2ccst2 = ioread8(bus->reg + NPCM_I2CCST2);
+
+				/*
+				 * the i2c module can response to 10 own SA.
+				 * check which one was addressed by the master.
+				 * repond to the first one.
+				 */
+				addr = ((i2ccst3 & 0x07) << 7) |
+					(i2ccst2 & 0x7F);
+				info = ffs(addr);
+				eaddr = (enum i2c_addr)info;
+				addr = npcm_i2c_get_slave_addr(bus, eaddr);
+				addr &= 0x7F;
+				bus->own_slave_addr = addr;
+				if (bus->PEC_mask & BIT(info))
+					bus->PEC_use = true;
+				else
+					bus->PEC_use = false;
+			} else {
+				if (NPCM_I2CCST_GCMATCH & val)
+					bus->own_slave_addr = 0;
+				if (NPCM_I2CCST_ARPMATCH & val)
+					bus->own_slave_addr = 0x61;
+			}
+		} else {
+			/*
+			 *  Slave match can happen in two options:
+			 *  1. Start, SA, read (slave read without further ado)
+			 *  2. Start, SA, read, data, restart, SA, read,  ...
+			 *     (slave read in fragmented mode)
+			 *  3. Start, SA, write, data, restart, SA, read, ..
+			 *     (regular write-read mode)
+			 */
+			if ((bus->state == I2C_OPER_STARTED &&
+			     bus->operation == I2C_READ_OPER &&
+			     bus->stop_ind == I2C_SLAVE_XMIT_IND) ||
+			     bus->stop_ind == I2C_SLAVE_RCV_IND) {
+				/* slave tx after slave rx w/o STOP */
+				bus->stop_ind = I2C_SLAVE_RESTART_IND;
+			}
+		}
+
+		if (NPCM_I2CST_XMIT & i2cst)
+			bus->stop_ind = I2C_SLAVE_XMIT_IND;
+		else
+			bus->stop_ind = I2C_SLAVE_RCV_IND;
+		bus->state = I2C_SLAVE_MATCH;
+		npcm_i2c_slave_rd_wr(bus);
+		iowrite8(NPCM_I2CST_NMATCH, bus->reg + NPCM_I2CST);
+		ret = IRQ_HANDLED;
+	}
+
+	/* Slave SDA status is set - tx or rx */
+	if ((NPCM_I2CST_SDAST & i2cst) ||
+	    (bus->fifo_use &&
+	    (npcm_i2c_tx_fifo_empty(bus) || npcm_i2c_rx_fifo_full(bus)))) {
+		npcm_i2c_slave_rd_wr(bus);
+		iowrite8(NPCM_I2CST_SDAST, bus->reg + NPCM_I2CST);
+		ret = IRQ_HANDLED;
+	} /* SDAST */
+
+	return ret;
+}
+
+static int npcm_i2c_reg_slave(struct i2c_client *client)
+{
+	unsigned long lock_flags;
+	struct npcm_i2c *bus = i2c_get_adapdata(client->adapter);
+
+	bus->slave = client;
+
+	if (!bus->slave)
+		return -EINVAL;
+
+	if (client->flags & I2C_CLIENT_TEN)
+		return -EAFNOSUPPORT;
+
+	spin_lock_irqsave(&bus->lock, lock_flags);
+
+	npcm_i2c_init_params(bus);
+	bus->slv_rd_size = 0;
+	bus->slv_wr_size = 0;
+	bus->slv_rd_ind = 0;
+	bus->slv_wr_ind = 0;
+	if (client->flags & I2C_CLIENT_PEC)
+		bus->PEC_use = true;
+
+	dev_info(bus->dev, "i2c%d register slave SA=0x%x, PEC=%d\n", bus->num,
+		 client->addr, bus->PEC_use);
+
+	npcm_i2c_slave_enable(bus, I2C_SLAVE_ADDR1, client->addr, true);
+	npcm_i2c_clear_fifo_int(bus);
+	npcm_i2c_clear_rx_fifo(bus);
+	npcm_i2c_clear_tx_fifo(bus);
+	npcm_i2c_slave_int_enable(bus, true);
+
+	spin_unlock_irqrestore(&bus->lock, lock_flags);
+	return 0;
+}
+
+static int npcm_i2c_unreg_slave(struct i2c_client *client)
+{
+	struct npcm_i2c *bus = client->adapter->algo_data;
+	unsigned long lock_flags;
+
+	spin_lock_irqsave(&bus->lock, lock_flags);
+	if (!bus->slave) {
+		spin_unlock_irqrestore(&bus->lock, lock_flags);
+		return -EINVAL;
+	}
+	npcm_i2c_slave_int_enable(bus, false);
+	npcm_i2c_remove_slave_addr(bus, client->addr);
+	bus->slave = NULL;
+	spin_unlock_irqrestore(&bus->lock, lock_flags);
+	return 0;
+}
+#endif /* CONFIG_I2C_SLAVE */
+
+static void npcm_i2c_master_fifo_read(struct npcm_i2c *bus)
+{
+	int rcount;
+	int fifo_bytes;
+	enum i2c_state_ind ind = I2C_MASTER_DONE_IND;
+
+	fifo_bytes = npcm_i2c_fifo_usage(bus);
+	rcount = bus->rd_size - bus->rd_ind;
+
+	/*
+	 * In order not to change the RX_TRH during transaction (we found that
+	 * this might be problematic if it takes too much time to read the FIFO)
+	 * we read the data in the following way. If the number of bytes to
+	 * read == FIFO Size + C (where C < FIFO Size)then first read C bytes
+	 * and in the next int we read rest of the data.
+	 */
+	if (rcount < (2 * I2C_HW_FIFO_SIZE) && rcount > I2C_HW_FIFO_SIZE)
+		fifo_bytes = rcount - I2C_HW_FIFO_SIZE;
+
+	if (rcount <= fifo_bytes) {
+		/* last bytes are about to be read - end of tx */
+		bus->state = I2C_STOP_PENDING;
+		bus->stop_ind = ind;
+		npcm_i2c_eob_int(bus, true);
+		/* Stop should be set before reading last byte. */
+		npcm_i2c_master_stop(bus);
+		npcm_i2c_read_fifo(bus, fifo_bytes);
+	} else {
+		npcm_i2c_read_fifo(bus, fifo_bytes);
+		rcount = bus->rd_size - bus->rd_ind;
+		npcm_i2c_set_fifo(bus, rcount, -1);
+	}
+}
+
+static void npcm_i2c_irq_master_handler_write(struct npcm_i2c *bus)
+{
+	u16 wcount;
+
+	if (bus->fifo_use)
+		npcm_i2c_clear_tx_fifo(bus); /* clear the TX fifo status bit */
+
+	/* Master write operation - last byte handling */
+	if (bus->wr_ind == bus->wr_size) {
+		if (bus->fifo_use && npcm_i2c_fifo_usage(bus) > 0)
+			/*
+			 * No more bytes to send (to add to the FIFO),
+			 * however the FIFO is not empty yet. It is
+			 * still in the middle of tx. Currently there's nothing
+			 * to do except for waiting to the end of the tx
+			 * We will get an int when the FIFO will get empty.
+			 */
+			return;
+
+		if (bus->rd_size == 0) {
+			/* all bytes have been written, in wr only operation */
+			npcm_i2c_eob_int(bus, true);
+			bus->state = I2C_STOP_PENDING;
+			bus->stop_ind = I2C_MASTER_DONE_IND;
+			npcm_i2c_master_stop(bus);
+			/* Clear SDA Status bit (by writing dummy byte) */
+			npcm_i2c_wr_byte(bus, 0xFF);
+
+		} else {
+			/* last write-byte written on previous int - restart */
+			npcm_i2c_set_fifo(bus, bus->rd_size, -1);
+			/* Generate repeated start upon next write to SDA */
+			npcm_i2c_master_start(bus);
+
+			/*
+			 * Receiving one byte only - stall after successful
+			 * completion of send address byte. If we NACK here, and
+			 * slave doesn't ACK the address, we might
+			 * unintentionally NACK the next multi-byte read.
+			 */
+			if (bus->rd_size == 1)
+				npcm_i2c_stall_after_start(bus, true);
+
+			/* Next int will occur on read */
+			bus->operation = I2C_READ_OPER;
+			/* send the slave address in read direction */
+			npcm_i2c_wr_byte(bus, bus->dest_addr | 0x1);
+		}
+	} else {
+		/* write next byte not last byte and not slave address */
+		if (!bus->fifo_use || bus->wr_size == 1) {
+			npcm_i2c_wr_byte(bus, bus->wr_buf[bus->wr_ind++]);
+		} else {
+			wcount = bus->wr_size - bus->wr_ind;
+			npcm_i2c_set_fifo(bus, -1, wcount);
+			if (wcount)
+				npcm_i2c_write_to_fifo_master(bus, wcount);
+		}
+	}
+}
+
+static void npcm_i2c_irq_master_handler_read(struct npcm_i2c *bus)
+{
+	u16 block_extra_bytes_size;
+	u8 data;
+
+	/* added bytes to the packet: */
+	block_extra_bytes_size = bus->read_block_use + bus->PEC_use;
+
+	/*
+	 * Perform master read, distinguishing between last byte and the rest of
+	 * the bytes. The last byte should be read when the clock is stopped
+	 */
+	if (bus->rd_ind == 0) { /* first byte handling: */
+		if (bus->read_block_use) {
+			/* first byte in block protocol is the size: */
+			data = npcm_i2c_rd_byte(bus);
+			data = clamp_val(data, 1, I2C_SMBUS_BLOCK_MAX);
+			bus->rd_size = data + block_extra_bytes_size;
+			bus->rd_buf[bus->rd_ind++] = data;
+
+			/* clear RX FIFO interrupt status: */
+			if (bus->fifo_use) {
+				data = ioread8(bus->reg + NPCM_I2CFIF_CTS);
+				data = data | NPCM_I2CFIF_CTS_RXF_TXE;
+				iowrite8(data, bus->reg + NPCM_I2CFIF_CTS);
+			}
+
+			npcm_i2c_set_fifo(bus, bus->rd_size - 1, -1);
+			npcm_i2c_stall_after_start(bus, false);
+		} else {
+			npcm_i2c_clear_tx_fifo(bus);
+			npcm_i2c_master_fifo_read(bus);
+		}
+	} else {
+		if (bus->rd_size == block_extra_bytes_size &&
+		    bus->read_block_use) {
+			bus->state = I2C_STOP_PENDING;
+			bus->stop_ind = I2C_BLOCK_BYTES_ERR_IND;
+			bus->cmd_err = -EIO;
+			npcm_i2c_eob_int(bus, true);
+			npcm_i2c_master_stop(bus);
+			npcm_i2c_read_fifo(bus, npcm_i2c_fifo_usage(bus));
+		} else {
+			npcm_i2c_master_fifo_read(bus);
+		}
+	}
+}
+
+static void npcm_i2c_irq_handle_nmatch(struct npcm_i2c *bus)
+{
+	iowrite8(NPCM_I2CST_NMATCH, bus->reg + NPCM_I2CST);
+	npcm_i2c_nack(bus);
+	bus->stop_ind = I2C_BUS_ERR_IND;
+	npcm_i2c_callback(bus, bus->stop_ind, npcm_i2c_get_index(bus));
+}
+
+/* A NACK has occurred */
+static void npcm_i2c_irq_handle_nack(struct npcm_i2c *bus)
+{
+	u8 val;
+
+	if (bus->nack_cnt < ULLONG_MAX)
+		bus->nack_cnt++;
+
+	if (bus->fifo_use) {
+		/*
+		 * if there are still untransmitted bytes in TX FIFO
+		 * reduce them from wr_ind
+		 */
+		if (bus->operation == I2C_WRITE_OPER)
+			bus->wr_ind -= npcm_i2c_fifo_usage(bus);
+
+		/* clear the FIFO */
+		iowrite8(NPCM_I2CFIF_CTS_CLR_FIFO, bus->reg + NPCM_I2CFIF_CTS);
+	}
+
+	/* In master write operation, got unexpected NACK */
+	bus->stop_ind = I2C_NACK_IND;
+	/* Only current master is allowed to issue Stop Condition */
+	if (npcm_i2c_is_master(bus)) {
+		/* stopping in the middle */
+		npcm_i2c_eob_int(bus, false);
+		npcm_i2c_master_stop(bus);
+
+		/*
+		 * The bus is released from stall only after the SW clears
+		 * NEGACK bit. Then a Stop condition is sent.
+		 */
+		npcm_i2c_clear_master_status(bus);
+		readx_poll_timeout_atomic(ioread8, bus->reg + NPCM_I2CCST, val,
+					  !(val & NPCM_I2CCST_BUSY), 10, 200);
+	}
+	bus->state = I2C_IDLE;
+
+	/*
+	 * In Master mode, NACK should be cleared only after STOP.
+	 * In such case, the bus is released from stall only after the
+	 * software clears NACK bit. Then a Stop condition is sent.
+	 */
+	npcm_i2c_callback(bus, bus->stop_ind, bus->wr_ind);
+}
+
+	/* Master mode: a Bus Error has been identified */
+static void npcm_i2c_irq_handle_ber(struct npcm_i2c *bus)
+{
+	if (bus->ber_cnt < ULLONG_MAX)
+		bus->ber_cnt++;
+	bus->stop_ind = I2C_BUS_ERR_IND;
+	if (npcm_i2c_is_master(bus)) {
+		npcm_i2c_master_abort(bus);
+	} else {
+		npcm_i2c_clear_master_status(bus);
+
+		/* Clear BB (BUS BUSY) bit */
+		iowrite8(NPCM_I2CCST_BB, bus->reg + NPCM_I2CCST);
+
+		bus->cmd_err = -EAGAIN;
+		npcm_i2c_callback(bus, bus->stop_ind, npcm_i2c_get_index(bus));
+	}
+	bus->state = I2C_IDLE;
+}
+
+	/* EOB: a master End Of Busy (meaning STOP completed) */
+static void npcm_i2c_irq_handle_eob(struct npcm_i2c *bus)
+{
+	npcm_i2c_eob_int(bus, false);
+	bus->state = I2C_IDLE;
+	npcm_i2c_callback(bus, bus->stop_ind, bus->rd_ind);
+}
+
+/* Address sent and requested stall occurred (Master mode) */
+static void npcm_i2c_irq_handle_stall_after_start(struct npcm_i2c *bus)
+{
+	if (npcm_i2c_is_quick(bus)) {
+		bus->state = I2C_STOP_PENDING;
+		bus->stop_ind = I2C_MASTER_DONE_IND;
+		npcm_i2c_eob_int(bus, true);
+		npcm_i2c_master_stop(bus);
+	} else if ((bus->rd_size == 1) && !bus->read_block_use) {
+		/*
+		 * Receiving one byte only - set NACK after ensuring
+		 * slave ACKed the address byte.
+		 */
+		npcm_i2c_nack(bus);
+	}
+
+	/* Reset stall-after-address-byte */
+	npcm_i2c_stall_after_start(bus, false);
+
+	/* Clear stall only after setting STOP */
+	iowrite8(NPCM_I2CST_STASTR, bus->reg + NPCM_I2CST);
+}
+
+/* SDA status is set - TX or RX, master */
+static void npcm_i2c_irq_handle_sda(struct npcm_i2c *bus, u8 i2cst)
+{
+	u8 fif_cts;
+
+	if (!npcm_i2c_is_master(bus))
+		return;
+
+	if (bus->state == I2C_IDLE) {
+		bus->stop_ind = I2C_WAKE_UP_IND;
+
+		if (npcm_i2c_is_quick(bus) || bus->read_block_use)
+			/*
+			 * Need to stall after successful
+			 * completion of sending address byte
+			 */
+			npcm_i2c_stall_after_start(bus, true);
+		else
+			npcm_i2c_stall_after_start(bus, false);
+
+		/*
+		 * Receiving one byte only - stall after successful completion
+		 * of sending address byte If we NACK here, and slave doesn't
+		 * ACK the address, we might unintentionally NACK the next
+		 * multi-byte read
+		 */
+		if (bus->wr_size == 0 && bus->rd_size == 1)
+			npcm_i2c_stall_after_start(bus, true);
+
+		/* Initiate I2C master tx */
+
+		/* select bank 1 for FIFO regs */
+		npcm_i2c_select_bank(bus, I2C_BANK_1);
+
+		fif_cts = ioread8(bus->reg + NPCM_I2CFIF_CTS);
+		fif_cts = fif_cts & ~NPCM_I2CFIF_CTS_SLVRSTR;
+
+		/* clear FIFO and relevant status bits. */
+		fif_cts = fif_cts | NPCM_I2CFIF_CTS_CLR_FIFO;
+		iowrite8(fif_cts, bus->reg + NPCM_I2CFIF_CTS);
+
+		/* re-enable */
+		fif_cts = fif_cts | NPCM_I2CFIF_CTS_RXF_TXE;
+		iowrite8(fif_cts, bus->reg + NPCM_I2CFIF_CTS);
+
+		/*
+		 * Configure the FIFO threshold:
+		 * according to the needed # of bytes to read.
+		 * Note: due to HW limitation can't config the rx fifo before it
+		 * got and ACK on the restart. LAST bit will not be reset unless
+		 * RX completed. It will stay set on the next tx.
+		 */
+		if (bus->wr_size)
+			npcm_i2c_set_fifo(bus, -1, bus->wr_size);
+		else
+			npcm_i2c_set_fifo(bus, bus->rd_size, -1);
+
+		bus->state = I2C_OPER_STARTED;
+
+		if (npcm_i2c_is_quick(bus) || bus->wr_size)
+			npcm_i2c_wr_byte(bus, bus->dest_addr);
+		else
+			npcm_i2c_wr_byte(bus, bus->dest_addr | BIT(0));
+	/* SDA interrupt, after start\restart */
+	} else {
+		if (NPCM_I2CST_XMIT & i2cst) {
+			bus->operation = I2C_WRITE_OPER;
+			npcm_i2c_irq_master_handler_write(bus);
+		} else {
+			bus->operation = I2C_READ_OPER;
+			npcm_i2c_irq_master_handler_read(bus);
+		}
+	}
+}
+
+static int npcm_i2c_int_master_handler(struct npcm_i2c *bus)
+{
+	u8 i2cst;
+	int ret = -EIO;
+
+	i2cst = ioread8(bus->reg + NPCM_I2CST);
+
+	if (FIELD_GET(NPCM_I2CST_NMATCH, i2cst)) {
+		npcm_i2c_irq_handle_nmatch(bus);
+		return 0;
+	}
+	/* A NACK has occurred */
+	if (FIELD_GET(NPCM_I2CST_NEGACK, i2cst)) {
+		npcm_i2c_irq_handle_nack(bus);
+		return 0;
+	}
+
+	/* Master mode: a Bus Error has been identified */
+	if (FIELD_GET(NPCM_I2CST_BER, i2cst)) {
+		npcm_i2c_irq_handle_ber(bus);
+		return 0;
+	}
+
+	/* EOB: a master End Of Busy (meaning STOP completed) */
+	if ((FIELD_GET(NPCM_I2CCTL1_EOBINTE,
+		       ioread8(bus->reg + NPCM_I2CCTL1)) == 1) &&
+	    (FIELD_GET(NPCM_I2CCST3_EO_BUSY,
+		       ioread8(bus->reg + NPCM_I2CCST3)))) {
+		npcm_i2c_irq_handle_eob(bus);
+		return 0;
+	}
+
+	/* Address sent and requested stall occurred (Master mode) */
+	if (FIELD_GET(NPCM_I2CST_STASTR, i2cst)) {
+		npcm_i2c_irq_handle_stall_after_start(bus);
+		ret = 0;
+	}
+
+	/* SDA status is set - TX or RX, master */
+	if (FIELD_GET(NPCM_I2CST_SDAST, i2cst) ||
+	    (bus->fifo_use &&
+	    (npcm_i2c_tx_fifo_empty(bus) || npcm_i2c_rx_fifo_full(bus)))) {
+		npcm_i2c_irq_handle_sda(bus, i2cst);
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/* recovery using TGCLK functionality of the module */
+static int npcm_i2c_recovery_tgclk(struct i2c_adapter *_adap)
+{
+	u8               val;
+	u8               fif_cts;
+	bool             done = false;
+	int              status = -ENOTRECOVERABLE;
+	struct npcm_i2c *bus = container_of(_adap, struct npcm_i2c, adap);
+	/* Allow 3 bytes (27 toggles) to be read from the slave: */
+	int              iter = 27;
+
+	if ((npcm_i2c_get_SDA(_adap) == 1) && (npcm_i2c_get_SCL(_adap) == 1)) {
+		dev_dbg(bus->dev, "bus%d recovery skipped, bus not stuck",
+			bus->num);
+		npcm_i2c_reset(bus);
+		return status;
+	}
+
+	npcm_i2c_int_enable(bus, false);
+	npcm_i2c_disable(bus);
+	npcm_i2c_enable(bus);
+	iowrite8(NPCM_I2CCST_BB, bus->reg + NPCM_I2CCST);
+	npcm_i2c_clear_tx_fifo(bus);
+	npcm_i2c_clear_rx_fifo(bus);
+	iowrite8(0, bus->reg + NPCM_I2CRXF_CTL);
+	iowrite8(0, bus->reg + NPCM_I2CTXF_CTL);
+	npcm_i2c_stall_after_start(bus, false);
+
+	/* select bank 1 for FIFO regs */
+	npcm_i2c_select_bank(bus, I2C_BANK_1);
+
+	/* clear FIFO and relevant status bits. */
+	fif_cts = ioread8(bus->reg + NPCM_I2CFIF_CTS);
+	fif_cts &= ~NPCM_I2CFIF_CTS_SLVRSTR;
+	fif_cts |= NPCM_I2CFIF_CTS_CLR_FIFO;
+	iowrite8(fif_cts, bus->reg + NPCM_I2CFIF_CTS);
+	npcm_i2c_set_fifo(bus, -1, 0);
+
+	/* Repeat the following sequence until SDA is released */
+	do {
+		/* Issue a single SCL toggle */
+		iowrite8(NPCM_I2CCST_TGSCL, bus->reg + NPCM_I2CCST);
+		usleep_range(20, 30);
+		/* If SDA line is inactive (high), stop */
+		if (npcm_i2c_get_SDA(_adap)) {
+			done = true;
+			status = 0;
+		}
+	} while (!done && iter--);
+
+	/* If SDA line is released: send start-addr-stop, to re-sync. */
+	if (npcm_i2c_get_SDA(_adap)) {
+		/* Send an address byte in write direction: */
+		npcm_i2c_wr_byte(bus, bus->dest_addr);
+		npcm_i2c_master_start(bus);
+		/* Wait until START condition is sent */
+		status = readx_poll_timeout(npcm_i2c_get_SCL, _adap, val, !val,
+					    20, 200);
+		/* If START condition was sent */
+		if (npcm_i2c_is_master(bus) > 0) {
+			usleep_range(20, 30);
+			npcm_i2c_master_stop(bus);
+			usleep_range(200, 500);
+		}
+	}
+	npcm_i2c_reset(bus);
+	npcm_i2c_int_enable(bus, true);
+
+	if ((npcm_i2c_get_SDA(_adap) == 1) && (npcm_i2c_get_SCL(_adap) == 1))
+		status = 0;
+	else
+		status = -ENOTRECOVERABLE;
+	if (status) {
+		if (bus->rec_fail_cnt < ULLONG_MAX)
+			bus->rec_fail_cnt++;
+	} else {
+		if (bus->rec_succ_cnt < ULLONG_MAX)
+			bus->rec_succ_cnt++;
+	}
+	return status;
+}
+
+/* recovery using bit banging functionality of the module */
+static void npcm_i2c_recovery_init(struct i2c_adapter *_adap)
+{
+	struct npcm_i2c *bus = container_of(_adap, struct npcm_i2c, adap);
+	struct i2c_bus_recovery_info *rinfo = &bus->rinfo;
+
+	rinfo->recover_bus = npcm_i2c_recovery_tgclk;
+
+	/*
+	 * npcm i2c HW allows direct reading of SCL and SDA.
+	 * However, it does not support setting SCL and SDA directly.
+	 * The recovery function can togle SCL when SDA is low (but not set)
+	 * Getter functions used internally, and can be used externaly.
+	 */
+	rinfo->get_scl = npcm_i2c_get_SCL;
+	rinfo->get_sda = npcm_i2c_get_SDA;
+	_adap->bus_recovery_info = rinfo;
+}
+
+/* SCLFRQ min/max field values */
+#define SCLFRQ_MIN  10
+#define SCLFRQ_MAX  511
+#define clk_coef(freq, mul)	DIV_ROUND_UP((freq) * (mul), 1000000)
+
+/*
+ * npcm_i2c_init_clk: init HW timing parameters.
+ * NPCM7XX i2c module timing parameters are depenent on module core clk (APB)
+ * and bus frequency.
+ * 100kHz bus requires tSCL = 4 * SCLFRQ * tCLK. LT and HT are simetric.
+ * 400kHz bus requires assymetric HT and LT. A different equation is recomended
+ * by the HW designer, given core clock range (equations in comments below).
+ *
+ */
+static int npcm_i2c_init_clk(struct npcm_i2c *bus, u32 bus_freq_hz)
+{
+	u32  k1 = 0;
+	u32  k2 = 0;
+	u8   dbnct = 0;
+	u32  sclfrq = 0;
+	u8   hldt = 7;
+	u8   fast_mode = 0;
+	u32  src_clk_khz;
+	u32  bus_freq_khz;
+
+	src_clk_khz = bus->apb_clk / 1000;
+	bus_freq_khz = bus_freq_hz / 1000;
+	bus->bus_freq = bus_freq_hz;
+
+	/* 100KHz and below: */
+	if (bus_freq_hz <= I2C_MAX_STANDARD_MODE_FREQ) {
+		sclfrq = src_clk_khz / (bus_freq_khz * 4);
+
+		if (sclfrq < SCLFRQ_MIN || sclfrq > SCLFRQ_MAX)
+			return -EDOM;
+
+		if (src_clk_khz >= 40000)
+			hldt = 17;
+		else if (src_clk_khz >= 12500)
+			hldt = 15;
+		else
+			hldt = 7;
+	}
+
+	/* 400KHz: */
+	else if (bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ) {
+		sclfrq = 0;
+		fast_mode = I2CCTL3_400K_MODE;
+
+		if (src_clk_khz < 7500)
+			/* 400KHZ cannot be supported for core clock < 7.5MHz */
+			return -EDOM;
+
+		else if (src_clk_khz >= 50000) {
+			k1 = 80;
+			k2 = 48;
+			hldt = 12;
+			dbnct = 7;
+		}
+
+		/* Master or Slave with frequency > 25MHz */
+		else if (src_clk_khz > 25000) {
+			hldt = clk_coef(src_clk_khz, 300) + 7;
+			k1 = clk_coef(src_clk_khz, 1600);
+			k2 = clk_coef(src_clk_khz, 900);
+		}
+	}
+
+	/* 1MHz: */
+	else if (bus_freq_hz <= I2C_MAX_FAST_MODE_PLUS_FREQ) {
+		sclfrq = 0;
+		fast_mode = I2CCTL3_400K_MODE;
+
+		/* 1MHZ cannot be supported for core clock < 24 MHz */
+		if (src_clk_khz < 24000)
+			return -EDOM;
+
+		k1 = clk_coef(src_clk_khz, 620);
+		k2 = clk_coef(src_clk_khz, 380);
+
+		/* Core clk > 40 MHz */
+		if (src_clk_khz > 40000) {
+			/*
+			 * Set HLDT:
+			 * SDA hold time:  (HLDT-7) * T(CLK) >= 120
+			 * HLDT = 120/T(CLK) + 7 = 120 * FREQ(CLK) + 7
+			 */
+			hldt = clk_coef(src_clk_khz, 120) + 7;
+		} else {
+			hldt = 7;
+			dbnct = 2;
+		}
+	}
+
+	/* Frequency larger than 1 MHz is not supported */
+	else
+		return -EINVAL;
+
+	if (bus_freq_hz >= I2C_MAX_FAST_MODE_FREQ) {
+		k1 = round_up(k1, 2);
+		k2 = round_up(k2 + 1, 2);
+		if (k1 < SCLFRQ_MIN || k1 > SCLFRQ_MAX ||
+		    k2 < SCLFRQ_MIN || k2 > SCLFRQ_MAX)
+			return -EDOM;
+	}
+
+	/* write sclfrq value. bits [6:0] are in I2CCTL2 reg */
+	iowrite8(FIELD_PREP(I2CCTL2_SCLFRQ6_0, sclfrq & 0x7F),
+		 bus->reg + NPCM_I2CCTL2);
+
+	/* bits [8:7] are in I2CCTL3 reg */
+	iowrite8(fast_mode | FIELD_PREP(I2CCTL3_SCLFRQ8_7, (sclfrq >> 7) & 0x3),
+		 bus->reg + NPCM_I2CCTL3);
+
+	/* Select Bank 0 to access NPCM_I2CCTL4/NPCM_I2CCTL5 */
+	npcm_i2c_select_bank(bus, I2C_BANK_0);
+
+	if (bus_freq_hz >= I2C_MAX_FAST_MODE_FREQ) {
+		/*
+		 * Set SCL Low/High Time:
+		 * k1 = 2 * SCLLT7-0 -> Low Time  = k1 / 2
+		 * k2 = 2 * SCLLT7-0 -> High Time = k2 / 2
+		 */
+		iowrite8(k1 / 2, bus->reg + NPCM_I2CSCLLT);
+		iowrite8(k2 / 2, bus->reg + NPCM_I2CSCLHT);
+
+		iowrite8(dbnct, bus->reg + NPCM_I2CCTL5);
+	}
+
+	iowrite8(hldt, bus->reg + NPCM_I2CCTL4);
+
+	/* Return to Bank 1, and stay there by default: */
+	npcm_i2c_select_bank(bus, I2C_BANK_1);
+
+	return 0;
+}
+
+static int npcm_i2c_init_module(struct npcm_i2c *bus, enum i2c_mode mode,
+				u32 bus_freq_hz)
+{
+	u8 val;
+	int ret;
+
+	/* Check whether module already enabled or frequency is out of bounds */
+	if ((bus->state != I2C_DISABLE && bus->state != I2C_IDLE) ||
+	    bus_freq_hz < I2C_FREQ_MIN_HZ || bus_freq_hz > I2C_FREQ_MAX_HZ)
+		return -EINVAL;
+
+	npcm_i2c_disable(bus);
+
+	/* Configure FIFO mode : */
+	if (FIELD_GET(I2C_VER_FIFO_EN, ioread8(bus->reg + I2C_VER))) {
+		bus->fifo_use = true;
+		npcm_i2c_select_bank(bus, I2C_BANK_0);
+		val = ioread8(bus->reg + NPCM_I2CFIF_CTL);
+		val |= NPCM_I2CFIF_CTL_FIFO_EN;
+		iowrite8(val, bus->reg + NPCM_I2CFIF_CTL);
+		npcm_i2c_select_bank(bus, I2C_BANK_1);
+	} else {
+		bus->fifo_use = false;
+	}
+
+	/* Configure I2C module clock frequency */
+	ret = npcm_i2c_init_clk(bus, bus_freq_hz);
+	if (ret) {
+		dev_err(bus->dev, "npcm_i2c_init_clk failed\n");
+		return ret;
+	}
+
+	/* Enable module (before configuring CTL1) */
+	npcm_i2c_enable(bus);
+	bus->state = I2C_IDLE;
+	val = ioread8(bus->reg + NPCM_I2CCTL1);
+	val = (val | NPCM_I2CCTL1_NMINTE) & ~NPCM_I2CCTL1_RWS;
+	iowrite8(val, bus->reg + NPCM_I2CCTL1);
+
+	npcm_i2c_int_enable(bus, true);
+
+	npcm_i2c_reset(bus);
+
+	return 0;
+}
+
+static int __npcm_i2c_init(struct npcm_i2c *bus, struct platform_device *pdev)
+{
+	u32 clk_freq_hz;
+	int ret;
+
+	/* Initialize the internal data structures */
+	bus->state = I2C_DISABLE;
+	bus->master_or_slave = I2C_SLAVE;
+	bus->int_time_stamp = 0;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	bus->slave = NULL;
+#endif
+
+	ret = device_property_read_u32(&pdev->dev, "clock-frequency",
+				       &clk_freq_hz);
+	if (ret) {
+		dev_info(&pdev->dev, "Could not read clock-frequency property");
+		clk_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
+	}
+
+	ret = npcm_i2c_init_module(bus, I2C_MASTER, clk_freq_hz);
+	if (ret) {
+		dev_err(&pdev->dev, "npcm_i2c_init_module failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static irqreturn_t npcm_i2c_bus_irq(int irq, void *dev_id)
+{
+	struct npcm_i2c *bus = dev_id;
+
+	if (npcm_i2c_is_master(bus))
+		bus->master_or_slave = I2C_MASTER;
+
+	if (bus->master_or_slave == I2C_MASTER) {
+		bus->int_time_stamp = jiffies;
+		if (!npcm_i2c_int_master_handler(bus))
+			return IRQ_HANDLED;
+	}
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	if (bus->slave) {
+		bus->master_or_slave = I2C_SLAVE;
+		return npcm_i2c_int_slave_handler(bus);
+	}
+#endif
+	return IRQ_NONE;
+}
+
+static bool npcm_i2c_master_start_xmit(struct npcm_i2c *bus,
+				       u8 slave_addr, u16 nwrite, u16 nread,
+				       u8 *write_data, u8 *read_data,
+				       bool use_PEC, bool use_read_block)
+{
+	if (bus->state != I2C_IDLE) {
+		bus->cmd_err = -EBUSY;
+		return false;
+	}
+	bus->dest_addr = slave_addr << 1;
+	bus->wr_buf = write_data;
+	bus->wr_size = nwrite;
+	bus->wr_ind = 0;
+	bus->rd_buf = read_data;
+	bus->rd_size = nread;
+	bus->rd_ind = 0;
+	bus->PEC_use = 0;
+
+	/* for tx PEC is appended to buffer from i2c IF. PEC flag is ignored */
+	if (nread)
+		bus->PEC_use = use_PEC;
+
+	bus->read_block_use = use_read_block;
+	if (nread && !nwrite)
+		bus->operation = I2C_READ_OPER;
+	else
+		bus->operation = I2C_WRITE_OPER;
+	if (bus->fifo_use) {
+		u8 i2cfif_cts;
+
+		npcm_i2c_select_bank(bus, I2C_BANK_1);
+		/* clear FIFO and relevant status bits. */
+		i2cfif_cts = ioread8(bus->reg + NPCM_I2CFIF_CTS);
+		i2cfif_cts &= ~NPCM_I2CFIF_CTS_SLVRSTR;
+		i2cfif_cts |= NPCM_I2CFIF_CTS_CLR_FIFO;
+		iowrite8(i2cfif_cts, bus->reg + NPCM_I2CFIF_CTS);
+	}
+
+	bus->state = I2C_IDLE;
+	npcm_i2c_stall_after_start(bus, true);
+	npcm_i2c_master_start(bus);
+	return true;
+}
+
+static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+				int num)
+{
+	struct npcm_i2c *bus = container_of(adap, struct npcm_i2c, adap);
+	struct i2c_msg *msg0, *msg1;
+	unsigned long time_left, flags;
+	u16 nwrite, nread;
+	u8 *write_data, *read_data;
+	u8 slave_addr;
+	int timeout;
+	int ret = 0;
+	bool read_block = false;
+	bool read_PEC = false;
+	u8 bus_busy;
+	unsigned long timeout_usec;
+
+	if (bus->state == I2C_DISABLE) {
+		dev_err(bus->dev, "I2C%d module is disabled", bus->num);
+		return -EINVAL;
+	}
+
+	msg0 = &msgs[0];
+	slave_addr = msg0->addr;
+	if (msg0->flags & I2C_M_RD) { /* read */
+		nwrite = 0;
+		write_data = NULL;
+		read_data = msg0->buf;
+		if (msg0->flags & I2C_M_RECV_LEN) {
+			nread = 1;
+			read_block = true;
+			if (msg0->flags & I2C_CLIENT_PEC)
+				read_PEC = true;
+		} else {
+			nread = msg0->len;
+		}
+	} else { /* write */
+		nwrite = msg0->len;
+		write_data = msg0->buf;
+		nread = 0;
+		read_data = NULL;
+		if (num == 2) {
+			msg1 = &msgs[1];
+			read_data = msg1->buf;
+			if (msg1->flags & I2C_M_RECV_LEN) {
+				nread = 1;
+				read_block = true;
+				if (msg1->flags & I2C_CLIENT_PEC)
+					read_PEC = true;
+			} else {
+				nread = msg1->len;
+				read_block = false;
+			}
+		}
+	}
+
+	/* Adaptive TimeOut: astimated time in usec + 100% margin */
+	timeout_usec = (2 * 10000 / bus->bus_freq) * (2 + nread + nwrite);
+	timeout = max(msecs_to_jiffies(35), usecs_to_jiffies(timeout_usec));
+	if (nwrite >= 32 * 1024 || nread >= 32 * 1024) {
+		dev_err(bus->dev, "i2c%d buffer too big\n", bus->num);
+		return -EINVAL;
+	}
+
+	time_left = jiffies + msecs_to_jiffies(DEFAULT_STALL_COUNT) + 1;
+	do {
+		/*
+		 * we must clear slave address immediately when the bus is not
+		 * busy, so we spinlock it, but we don't keep the lock for the
+		 * entire while since it is too long.
+		 */
+		spin_lock_irqsave(&bus->lock, flags);
+		bus_busy = ioread8(bus->reg + NPCM_I2CCST) & NPCM_I2CCST_BB;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+		if (!bus_busy && bus->slave)
+			iowrite8((bus->slave->addr & 0x7F),
+				 bus->reg + NPCM_I2CADDR1);
+#endif
+		spin_unlock_irqrestore(&bus->lock, flags);
+
+	} while (time_is_after_jiffies(time_left) && bus_busy);
+
+	if (bus_busy) {
+		iowrite8(NPCM_I2CCST_BB, bus->reg + NPCM_I2CCST);
+		npcm_i2c_reset(bus);
+		i2c_recover_bus(adap);
+		return -EAGAIN;
+	}
+
+	npcm_i2c_init_params(bus);
+	bus->dest_addr = slave_addr;
+	bus->msgs = msgs;
+	bus->msgs_num = num;
+	bus->cmd_err = 0;
+	bus->read_block_use = read_block;
+
+	reinit_completion(&bus->cmd_complete);
+	if (!npcm_i2c_master_start_xmit(bus, slave_addr, nwrite, nread,
+					write_data, read_data, read_PEC,
+					read_block))
+		ret = -EBUSY;
+
+	if (ret != -EBUSY) {
+		time_left = wait_for_completion_timeout(&bus->cmd_complete,
+							timeout);
+
+		if (time_left == 0) {
+			if (bus->timeout_cnt < ULLONG_MAX)
+				bus->timeout_cnt++;
+			if (bus->master_or_slave == I2C_MASTER) {
+				i2c_recover_bus(adap);
+				bus->cmd_err = -EIO;
+				bus->state = I2C_IDLE;
+			}
+		}
+	}
+	ret = bus->cmd_err;
+
+	/* if there was BER, check if need to recover the bus: */
+	if (bus->cmd_err == -EAGAIN)
+		ret = i2c_recover_bus(adap);
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	/* reenable slave if it was enabled */
+	if (bus->slave)
+		iowrite8((bus->slave->addr & 0x7F) | NPCM_I2CADDR_SAEN,
+			 bus->reg + NPCM_I2CADDR1);
+#endif
+	return bus->cmd_err;
+}
+
+static u32 npcm_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C |
+	       I2C_FUNC_SMBUS_EMUL |
+	       I2C_FUNC_SMBUS_BLOCK_DATA |
+	       I2C_FUNC_SMBUS_PEC |
+	       I2C_FUNC_SLAVE;
+}
+
+static const struct i2c_adapter_quirks npcm_i2c_quirks = {
+	.max_read_len = 32768,
+	.max_write_len = 32768,
+	.flags = I2C_AQ_COMB_WRITE_THEN_READ,
+};
+
+static const struct i2c_algorithm npcm_i2c_algo = {
+	.master_xfer = npcm_i2c_master_xfer,
+	.functionality = npcm_i2c_functionality,
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	.reg_slave	= npcm_i2c_reg_slave,
+	.unreg_slave	= npcm_i2c_unreg_slave,
+#endif
+};
+
+/* i2c debugfs directory: used to keep health monitor of i2c devices */
+static struct dentry *npcm_i2c_debugfs_dir;
+
+static void npcm_i2c_init_debugfs(struct platform_device *pdev,
+				  struct npcm_i2c *bus)
+{
+	struct dentry *d;
+
+	if (!npcm_i2c_debugfs_dir)
+		return;
+	d = debugfs_create_dir(dev_name(&pdev->dev), npcm_i2c_debugfs_dir);
+	if (IS_ERR_OR_NULL(d))
+		return;
+	debugfs_create_u64("ber_cnt", 0444, d, &bus->ber_cnt);
+	debugfs_create_u64("nack_cnt", 0444, d, &bus->nack_cnt);
+	debugfs_create_u64("rec_succ_cnt", 0444, d, &bus->rec_succ_cnt);
+	debugfs_create_u64("rec_fail_cnt", 0444, d, &bus->rec_fail_cnt);
+	debugfs_create_u64("timeout_cnt", 0444, d, &bus->timeout_cnt);
+
+	bus->debugfs = d;
+}
+
+static int npcm_i2c_probe_bus(struct platform_device *pdev)
+{
+	struct npcm_i2c *bus;
+	struct i2c_adapter *adap;
+	struct clk *i2c_clk;
+	static struct regmap *gcr_regmap;
+	static struct regmap *clk_regmap;
+	int irq;
+	int ret;
+
+	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
+	if (!bus)
+		return -ENOMEM;
+
+	bus->dev = &pdev->dev;
+
+	bus->num = of_alias_get_id(pdev->dev.of_node, "i2c");
+	/* core clk must be acquired to calculate module timing settings */
+	i2c_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(i2c_clk))
+		return PTR_ERR(i2c_clk);
+	bus->apb_clk = clk_get_rate(i2c_clk);
+
+	gcr_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-gcr");
+	if (IS_ERR(gcr_regmap))
+		return PTR_ERR(gcr_regmap);
+	regmap_write(gcr_regmap, NPCM_I2CSEGCTL, NPCM_I2CSEGCTL_INIT_VAL);
+
+	clk_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-clk");
+	if (IS_ERR(clk_regmap))
+		return PTR_ERR(clk_regmap);
+
+	bus->reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(bus->reg))
+		return PTR_ERR(bus->reg);
+
+	spin_lock_init(&bus->lock);
+	init_completion(&bus->cmd_complete);
+
+	adap = &bus->adap;
+	adap->owner = THIS_MODULE;
+	adap->retries = 3;
+	adap->timeout = HZ;
+	adap->algo = &npcm_i2c_algo;
+	adap->quirks = &npcm_i2c_quirks;
+	adap->algo_data = bus;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+	adap->nr = pdev->id;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_irq(bus->dev, irq, npcm_i2c_bus_irq, 0,
+			       dev_name(bus->dev), bus);
+	if (ret)
+		return ret;
+
+	ret = __npcm_i2c_init(bus, pdev);
+	if (ret)
+		return ret;
+
+	npcm_i2c_recovery_init(adap);
+
+	i2c_set_adapdata(adap, bus);
+
+	snprintf(bus->adap.name, sizeof(bus->adap.name), "npcm_i2c_%d",
+		 bus->num);
+	ret = i2c_add_numbered_adapter(&bus->adap);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, bus);
+	npcm_i2c_init_debugfs(pdev, bus);
+	return 0;
+}
+
+static int npcm_i2c_remove_bus(struct platform_device *pdev)
+{
+	unsigned long lock_flags;
+	struct npcm_i2c *bus = platform_get_drvdata(pdev);
+
+	debugfs_remove_recursive(bus->debugfs);
+	spin_lock_irqsave(&bus->lock, lock_flags);
+	npcm_i2c_disable(bus);
+	spin_unlock_irqrestore(&bus->lock, lock_flags);
+	i2c_del_adapter(&bus->adap);
+	return 0;
+}
+
+static const struct of_device_id npcm_i2c_bus_of_table[] = {
+	{ .compatible = "nuvoton,npcm750-i2c", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, npcm_i2c_bus_of_table);
+
+static struct platform_driver npcm_i2c_bus_driver = {
+	.probe = npcm_i2c_probe_bus,
+	.remove = npcm_i2c_remove_bus,
+	.driver = {
+		.name = "nuvoton-i2c",
+		.of_match_table = npcm_i2c_bus_of_table,
+	}
+};
+
+static int __init npcm_i2c_init(void)
+{
+	npcm_i2c_debugfs_dir = debugfs_create_dir("npcm_i2c", NULL);
+	platform_driver_register(&npcm_i2c_bus_driver);
+	return 0;
+}
+module_init(npcm_i2c_init);
+
+static void __exit npcm_i2c_exit(void)
+{
+	platform_driver_unregister(&npcm_i2c_bus_driver);
+	debugfs_remove_recursive(npcm_i2c_debugfs_dir);
+}
+module_exit(npcm_i2c_exit);
+
+MODULE_AUTHOR("Avi Fishman <avi.fishman@gmail.com>");
+MODULE_AUTHOR("Tali Perry <tali.perry@nuvoton.com>");
+MODULE_AUTHOR("Tyrone Ting <kfting@nuvoton.com>");
+MODULE_DESCRIPTION("Nuvoton I2C Bus Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
index f5d25ce00f03..f480105000b8 100644
--- a/drivers/i2c/busses/i2c-nvidia-gpu.c
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -277,10 +277,7 @@ static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
 	i2cd->gpu_ccgx_ucsi->irq = irq;
 	i2cd->gpu_ccgx_ucsi->properties = ccgx_props;
 	i2cd->ccgx_client = i2c_new_client_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
-	if (IS_ERR(i2cd->ccgx_client))
-		return PTR_ERR(i2cd->ccgx_client);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(i2cd->ccgx_client);
 }
 
 static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id)
diff --git a/drivers/i2c/busses/i2c-octeon-platdrv.c b/drivers/i2c/busses/i2c-octeon-platdrv.c
index 64bda83e65ac..0c227963c8d6 100644
--- a/drivers/i2c/busses/i2c-octeon-platdrv.c
+++ b/drivers/i2c/busses/i2c-octeon-platdrv.c
@@ -136,7 +136,6 @@ static int octeon_i2c_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
 	int irq, result = 0, hlc_irq = 0;
-	struct resource *res_mem;
 	struct octeon_i2c *i2c;
 	bool cn78xx_style;
 
@@ -167,8 +166,7 @@ static int octeon_i2c_probe(struct platform_device *pdev)
 	i2c->roff.twsi_int = 0x10;
 	i2c->roff.sw_twsi_ext = 0x18;
 
-	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->twsi_base = devm_ioremap_resource(&pdev->dev, res_mem);
+	i2c->twsi_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->twsi_base)) {
 		result = PTR_ERR(i2c->twsi_base);
 		goto out;
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 71b4637c86b7..175c590b93b7 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1365,10 +1365,8 @@ omap_i2c_probe(struct platform_device *pdev)
 	u16 minor, major;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "no irq resource?\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	omap = devm_kzalloc(&pdev->dev, sizeof(struct omap_i2c_dev), GFP_KERNEL);
 	if (!omap)
diff --git a/drivers/i2c/busses/i2c-owl.c b/drivers/i2c/busses/i2c-owl.c
index 3ab8be62c581..672f1f239bd6 100644
--- a/drivers/i2c/busses/i2c-owl.c
+++ b/drivers/i2c/busses/i2c-owl.c
@@ -396,23 +396,19 @@ static int owl_i2c_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct owl_i2c_dev *i2c_dev;
-	struct resource *res;
 	int ret, irq;
 
 	i2c_dev = devm_kzalloc(dev, sizeof(*i2c_dev), GFP_KERNEL);
 	if (!i2c_dev)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c_dev->base = devm_ioremap_resource(dev, res);
+	i2c_dev->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c_dev->base))
 		return PTR_ERR(i2c_dev->base);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(dev, "failed to get IRQ number\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	if (of_property_read_u32(dev->of_node, "clock-frequency",
 				 &i2c_dev->bus_freq))
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 635dd697ac0b..546426a470cc 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -149,8 +149,7 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
 	if (!i2c)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	i2c->reg_base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(i2c->reg_base))
 		return PTR_ERR(i2c->reg_base);
 
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 30ded6422e7b..69740a4ff1db 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -977,7 +977,8 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	}
 
 	if (dev->vendor == PCI_VENDOR_ID_AMD &&
-	    dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) {
+	    (dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS ||
+	     dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)) {
 		retval = piix4_setup_sb800(dev, id, 1);
 	}
 
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 686c06f31625..5d7207c10f1d 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -720,7 +720,6 @@ static int i2c_pnx_probe(struct platform_device *pdev)
 
 	alg_data->irq = platform_get_irq(pdev, 0);
 	if (alg_data->irq < 0) {
-		dev_err(&pdev->dev, "Failed to get IRQ from platform resource\n");
 		ret = alg_data->irq;
 		goto out_clock;
 	}
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index d565714c1f13..3e38e114948b 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -207,18 +207,18 @@ static u32 i2c_powermac_get_addr(struct i2c_adapter *adap,
 					   struct pmac_i2c_bus *bus,
 					   struct device_node *node)
 {
-	const __be32 *prop;
-	int len;
+	u32 prop;
+	int ret;
 
 	/* First check for valid "reg" */
-	prop = of_get_property(node, "reg", &len);
-	if (prop && (len >= sizeof(int)))
-		return (be32_to_cpup(prop) & 0xff) >> 1;
+	ret = of_property_read_u32(node, "reg", &prop);
+	if (ret == 0)
+		return (prop & 0xff) >> 1;
 
 	/* Then check old-style "i2c-address" */
-	prop = of_get_property(node, "i2c-address", &len);
-	if (prop && (len >= sizeof(int)))
-		return (be32_to_cpup(prop) & 0xff) >> 1;
+	ret = of_property_read_u32(node, "i2c-address", &prop);
+	if (ret == 0)
+		return (prop & 0xff) >> 1;
 
 	/* Now handle some devices with missing "reg" properties */
 	if (of_node_name_eq(node, "cereal"))
@@ -315,7 +315,7 @@ static void i2c_powermac_register_devices(struct i2c_adapter *adap,
 {
 	struct i2c_client *newdev;
 	struct device_node *node;
-	bool found_onyx = 0;
+	bool found_onyx = false;
 
 	/*
 	 * In some cases we end up with the via-pmu node itself, in this
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 466e4f681d7a..35ca2c02c9b9 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -16,25 +16,120 @@
  *    Dec 2004: Added support for PXA27x and slave device probing [Liam Girdwood]
  *    Feb 2005: Rework slave mode handling [RMK]
  */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/time.h>
-#include <linux/sched.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/err.h>
 #include <linux/errno.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/slab.h>
-#include <linux/io.h>
 #include <linux/platform_data/i2c-pxa.h>
+#include <linux/slab.h>
+
+/* I2C register field definitions */
+#define IBMR_SDAS	(1 << 0)
+#define IBMR_SCLS	(1 << 1)
+
+#define ICR_START	(1 << 0)	   /* start bit */
+#define ICR_STOP	(1 << 1)	   /* stop bit */
+#define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
+#define ICR_TB		(1 << 3)	   /* transfer byte bit */
+#define ICR_MA		(1 << 4)	   /* master abort */
+#define ICR_SCLE	(1 << 5)	   /* master clock enable */
+#define ICR_IUE		(1 << 6)	   /* unit enable */
+#define ICR_GCD		(1 << 7)	   /* general call disable */
+#define ICR_ITEIE	(1 << 8)	   /* enable tx interrupts */
+#define ICR_IRFIE	(1 << 9)	   /* enable rx interrupts */
+#define ICR_BEIE	(1 << 10)	   /* enable bus error ints */
+#define ICR_SSDIE	(1 << 11)	   /* slave STOP detected int enable */
+#define ICR_ALDIE	(1 << 12)	   /* enable arbitration interrupt */
+#define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
+#define ICR_UR		(1 << 14)	   /* unit reset */
+#define ICR_FM		(1 << 15)	   /* fast mode */
+#define ICR_HS		(1 << 16)	   /* High Speed mode */
+#define ICR_A3700_FM	(1 << 16)	   /* fast mode for armada-3700 */
+#define ICR_A3700_HS	(1 << 17)	   /* high speed mode for armada-3700 */
+#define ICR_GPIOEN	(1 << 19)	   /* enable GPIO mode for SCL in HS */
+
+#define ISR_RWM		(1 << 0)	   /* read/write mode */
+#define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
+#define ISR_UB		(1 << 2)	   /* unit busy */
+#define ISR_IBB		(1 << 3)	   /* bus busy */
+#define ISR_SSD		(1 << 4)	   /* slave stop detected */
+#define ISR_ALD		(1 << 5)	   /* arbitration loss detected */
+#define ISR_ITE		(1 << 6)	   /* tx buffer empty */
+#define ISR_IRF		(1 << 7)	   /* rx buffer full */
+#define ISR_GCAD	(1 << 8)	   /* general call address detected */
+#define ISR_SAD		(1 << 9)	   /* slave address detected */
+#define ISR_BED		(1 << 10)	   /* bus error no ACK/NAK */
+
+#define ILCR_SLV_SHIFT		0
+#define ILCR_SLV_MASK		(0x1FF << ILCR_SLV_SHIFT)
+#define ILCR_FLV_SHIFT		9
+#define ILCR_FLV_MASK		(0x1FF << ILCR_FLV_SHIFT)
+#define ILCR_HLVL_SHIFT		18
+#define ILCR_HLVL_MASK		(0x1FF << ILCR_HLVL_SHIFT)
+#define ILCR_HLVH_SHIFT		27
+#define ILCR_HLVH_MASK		(0x1F << ILCR_HLVH_SHIFT)
+
+#define IWCR_CNT_SHIFT		0
+#define IWCR_CNT_MASK		(0x1F << IWCR_CNT_SHIFT)
+#define IWCR_HS_CNT1_SHIFT	5
+#define IWCR_HS_CNT1_MASK	(0x1F << IWCR_HS_CNT1_SHIFT)
+#define IWCR_HS_CNT2_SHIFT	10
+#define IWCR_HS_CNT2_MASK	(0x1F << IWCR_HS_CNT2_SHIFT)
+
+/* need a longer timeout if we're dealing with the fact we may well be
+ * looking at a multi-master environment
+ */
+#define DEF_TIMEOUT             32
+
+#define NO_SLAVE		(-ENXIO)
+#define BUS_ERROR               (-EREMOTEIO)
+#define XFER_NAKED              (-ECONNREFUSED)
+#define I2C_RETRY               (-2000) /* an error has occurred retry transmit */
+
+/* ICR initialize bit values
+ *
+ * 15 FM     0 (100 kHz operation)
+ * 14 UR     0 (No unit reset)
+ * 13 SADIE  0 (Disables the unit from interrupting on slave addresses
+ *              matching its slave address)
+ * 12 ALDIE  0 (Disables the unit from interrupt when it loses arbitration
+ *              in master mode)
+ * 11 SSDIE  0 (Disables interrupts from a slave stop detected, in slave mode)
+ * 10 BEIE   1 (Enable interrupts from detected bus errors, no ACK sent)
+ *  9 IRFIE  1 (Enable interrupts from full buffer received)
+ *  8 ITEIE  1 (Enables the I2C unit to interrupt when transmit buffer empty)
+ *  7 GCD    1 (Disables i2c unit response to general call messages as a slave)
+ *  6 IUE    0 (Disable unit until we change settings)
+ *  5 SCLE   1 (Enables the i2c clock output for master mode (drives SCL)
+ *  4 MA     0 (Only send stop with the ICR stop bit)
+ *  3 TB     0 (We are not transmitting a byte initially)
+ *  2 ACKNAK 0 (Send an ACK after the unit receives a byte)
+ *  1 STOP   0 (Do not send a STOP)
+ *  0 START  0 (Do not send a START)
+ */
+#define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
 
-#include <asm/irq.h>
+/* I2C status register init values
+ *
+ * 10 BED    1 (Clear bus error detected)
+ *  9 SAD    1 (Clear slave address detected)
+ *  7 IRF    1 (Clear IDBR Receive Full)
+ *  6 ITE    1 (Clear IDBR Transmit Empty)
+ *  5 ALD    1 (Clear Arbitration Loss Detected)
+ *  4 SSD    1 (Clear Slave Stop Detected)
+ */
+#define I2C_ISR_INIT	0x7FF  /* status register init */
 
 struct pxa_reg_layout {
 	u32 ibmr;
@@ -56,12 +151,7 @@ enum pxa_i2c_types {
 	REGS_A3700,
 };
 
-#define ICR_BUSMODE_FM	(1 << 16)	   /* shifted fast mode for armada-3700 */
-#define ICR_BUSMODE_HS	(1 << 17)	   /* shifted high speed mode for armada-3700 */
-
-/*
- * I2C registers definitions
- */
+/* I2C register layout definitions */
 static struct pxa_reg_layout pxa_reg_layout[] = {
 	[REGS_PXA2XX] = {
 		.ibmr =	0x00,
@@ -69,6 +159,8 @@ static struct pxa_reg_layout pxa_reg_layout[] = {
 		.icr =	0x10,
 		.isr =	0x18,
 		.isar =	0x20,
+		.fm = ICR_FM,
+		.hs = ICR_HS,
 	},
 	[REGS_PXA3XX] = {
 		.ibmr =	0x00,
@@ -76,6 +168,8 @@ static struct pxa_reg_layout pxa_reg_layout[] = {
 		.icr =	0x08,
 		.isr =	0x0c,
 		.isar =	0x10,
+		.fm = ICR_FM,
+		.hs = ICR_HS,
 	},
 	[REGS_CE4100] = {
 		.ibmr =	0x14,
@@ -83,6 +177,8 @@ static struct pxa_reg_layout pxa_reg_layout[] = {
 		.icr =	0x00,
 		.isr =	0x04,
 		/* no isar register */
+		.fm = ICR_FM,
+		.hs = ICR_HS,
 	},
 	[REGS_PXA910] = {
 		.ibmr = 0x00,
@@ -92,6 +188,8 @@ static struct pxa_reg_layout pxa_reg_layout[] = {
 		.isar = 0x20,
 		.ilcr = 0x28,
 		.iwcr = 0x30,
+		.fm = ICR_FM,
+		.hs = ICR_HS,
 	},
 	[REGS_A3700] = {
 		.ibmr =	0x00,
@@ -99,11 +197,20 @@ static struct pxa_reg_layout pxa_reg_layout[] = {
 		.icr =	0x08,
 		.isr =	0x0c,
 		.isar =	0x10,
-		.fm = ICR_BUSMODE_FM,
-		.hs = ICR_BUSMODE_HS,
+		.fm = ICR_A3700_FM,
+		.hs = ICR_A3700_HS,
 	},
 };
 
+static const struct of_device_id i2c_pxa_dt_ids[] = {
+	{ .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX },
+	{ .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX },
+	{ .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 },
+	{ .compatible = "marvell,armada-3700-i2c", .data = (void *)REGS_A3700 },
+	{}
+};
+MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
+
 static const struct platform_device_id i2c_pxa_id_table[] = {
 	{ "pxa2xx-i2c",		REGS_PXA2XX },
 	{ "pxa3xx-pwri2c",	REGS_PXA3XX },
@@ -114,58 +221,6 @@ static const struct platform_device_id i2c_pxa_id_table[] = {
 };
 MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
 
-/*
- * I2C bit definitions
- */
-
-#define ICR_START	(1 << 0)	   /* start bit */
-#define ICR_STOP	(1 << 1)	   /* stop bit */
-#define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
-#define ICR_TB		(1 << 3)	   /* transfer byte bit */
-#define ICR_MA		(1 << 4)	   /* master abort */
-#define ICR_SCLE	(1 << 5)	   /* master clock enable */
-#define ICR_IUE		(1 << 6)	   /* unit enable */
-#define ICR_GCD		(1 << 7)	   /* general call disable */
-#define ICR_ITEIE	(1 << 8)	   /* enable tx interrupts */
-#define ICR_IRFIE	(1 << 9)	   /* enable rx interrupts */
-#define ICR_BEIE	(1 << 10)	   /* enable bus error ints */
-#define ICR_SSDIE	(1 << 11)	   /* slave STOP detected int enable */
-#define ICR_ALDIE	(1 << 12)	   /* enable arbitration interrupt */
-#define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
-#define ICR_UR		(1 << 14)	   /* unit reset */
-#define ICR_FM		(1 << 15)	   /* fast mode */
-#define ICR_HS		(1 << 16)	   /* High Speed mode */
-#define ICR_GPIOEN	(1 << 19)	   /* enable GPIO mode for SCL in HS */
-
-#define ISR_RWM		(1 << 0)	   /* read/write mode */
-#define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
-#define ISR_UB		(1 << 2)	   /* unit busy */
-#define ISR_IBB		(1 << 3)	   /* bus busy */
-#define ISR_SSD		(1 << 4)	   /* slave stop detected */
-#define ISR_ALD		(1 << 5)	   /* arbitration loss detected */
-#define ISR_ITE		(1 << 6)	   /* tx buffer empty */
-#define ISR_IRF		(1 << 7)	   /* rx buffer full */
-#define ISR_GCAD	(1 << 8)	   /* general call address detected */
-#define ISR_SAD		(1 << 9)	   /* slave address detected */
-#define ISR_BED		(1 << 10)	   /* bus error no ACK/NAK */
-
-/* bit field shift & mask */
-#define ILCR_SLV_SHIFT		0
-#define ILCR_SLV_MASK		(0x1FF << ILCR_SLV_SHIFT)
-#define ILCR_FLV_SHIFT		9
-#define ILCR_FLV_MASK		(0x1FF << ILCR_FLV_SHIFT)
-#define ILCR_HLVL_SHIFT		18
-#define ILCR_HLVL_MASK		(0x1FF << ILCR_HLVL_SHIFT)
-#define ILCR_HLVH_SHIFT		27
-#define ILCR_HLVH_MASK		(0x1F << ILCR_HLVH_SHIFT)
-
-#define IWCR_CNT_SHIFT		0
-#define IWCR_CNT_MASK		(0x1F << IWCR_CNT_SHIFT)
-#define IWCR_HS_CNT1_SHIFT	5
-#define IWCR_HS_CNT1_MASK	(0x1F << IWCR_HS_CNT1_SHIFT)
-#define IWCR_HS_CNT2_SHIFT	10
-#define IWCR_HS_CNT2_MASK	(0x1F << IWCR_HS_CNT2_SHIFT)
-
 struct pxa_i2c {
 	spinlock_t		lock;
 	wait_queue_head_t	wait;
@@ -207,6 +262,11 @@ struct pxa_i2c {
 	bool			highmode_enter;
 	u32			fm_mask;
 	u32			hs_mask;
+
+	struct i2c_bus_recovery_info recovery;
+	struct pinctrl		*pinctrl;
+	struct pinctrl_state	*pinctrl_default;
+	struct pinctrl_state	*pinctrl_recovery;
 };
 
 #define _IBMR(i2c)	((i2c)->reg_ibmr)
@@ -234,13 +294,14 @@ struct bits {
 static inline void
 decode_bits(const char *prefix, const struct bits *bits, int num, u32 val)
 {
-	printk("%s %08x: ", prefix, val);
+	printk("%s %08x:", prefix, val);
 	while (num--) {
 		const char *str = val & bits->mask ? bits->set : bits->unset;
 		if (str)
-			printk("%s ", str);
+			pr_cont(" %s", str);
 		bits++;
 	}
+	pr_cont("\n");
 }
 
 static const struct bits isr_bits[] = {
@@ -260,7 +321,6 @@ static const struct bits isr_bits[] = {
 static void decode_ISR(unsigned int val)
 {
 	decode_bits(KERN_DEBUG "ISR", isr_bits, ARRAY_SIZE(isr_bits), val);
-	printk("\n");
 }
 
 static const struct bits icr_bits[] = {
@@ -285,7 +345,6 @@ static const struct bits icr_bits[] = {
 static void decode_ICR(unsigned int val)
 {
 	decode_bits(KERN_DEBUG "ICR", icr_bits, ARRAY_SIZE(icr_bits), val);
-	printk("\n");
 }
 #endif
 
@@ -311,11 +370,10 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
 	dev_err(dev, "IBMR: %08x IDBR: %08x ICR: %08x ISR: %08x\n",
 		readl(_IBMR(i2c)), readl(_IDBR(i2c)), readl(_ICR(i2c)),
 		readl(_ISR(i2c)));
-	dev_dbg(dev, "log: ");
+	dev_err(dev, "log:");
 	for (i = 0; i < i2c->irqlogidx; i++)
-		pr_debug("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]);
-
-	pr_debug("\n");
+		pr_cont(" [%03x:%05x]", i2c->isrlog[i], i2c->icrlog[i]);
+	pr_cont("\n");
 }
 
 #else /* ifdef DEBUG */
@@ -330,7 +388,6 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
 #endif /* ifdef DEBUG / else */
 
 static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret);
-static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id);
 
 static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c)
 {
@@ -346,7 +403,7 @@ static void i2c_pxa_abort(struct pxa_i2c *i2c)
 		return;
 	}
 
-	while ((i > 0) && (readl(_IBMR(i2c)) & 0x1) == 0) {
+	while ((i > 0) && (readl(_IBMR(i2c)) & IBMR_SDAS) == 0) {
 		unsigned long icr = readl(_ICR(i2c));
 
 		icr &= ~ICR_START;
@@ -367,19 +424,26 @@ static void i2c_pxa_abort(struct pxa_i2c *i2c)
 static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c)
 {
 	int timeout = DEF_TIMEOUT;
+	u32 isr;
+
+	while (1) {
+		isr = readl(_ISR(i2c));
+		if (!(isr & (ISR_IBB | ISR_UB)))
+			return 0;
 
-	while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) {
-		if ((readl(_ISR(i2c)) & ISR_SAD) != 0)
+		if (isr & ISR_SAD)
 			timeout += 4;
 
+		if (!timeout--)
+			break;
+
 		msleep(2);
 		show_state(i2c);
 	}
 
-	if (timeout < 0)
-		show_state(i2c);
+	show_state(i2c);
 
-	return timeout < 0 ? I2C_RETRY : 0;
+	return I2C_RETRY;
 }
 
 static int i2c_pxa_wait_master(struct pxa_i2c *i2c)
@@ -401,7 +465,8 @@ static int i2c_pxa_wait_master(struct pxa_i2c *i2c)
 		 * quick check of the i2c lines themselves to ensure they've
 		 * gone high...
 		 */
-		if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 && readl(_IBMR(i2c)) == 3) {
+		if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 &&
+		    readl(_IBMR(i2c)) == (IBMR_SCLS | IBMR_SDAS)) {
 			if (i2c_debug > 0)
 				dev_dbg(&i2c->adap.dev, "%s: done\n", __func__);
 			return 1;
@@ -501,13 +566,8 @@ static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode)
 #define i2c_pxa_set_slave(i2c, err)	do { } while (0)
 #endif
 
-static void i2c_pxa_reset(struct pxa_i2c *i2c)
+static void i2c_pxa_do_reset(struct pxa_i2c *i2c)
 {
-	pr_debug("Resetting I2C Controller Unit\n");
-
-	/* abort any transfer currently under way */
-	i2c_pxa_abort(i2c);
-
 	/* reset according to 9.8 */
 	writel(ICR_UR, _ICR(i2c));
 	writel(I2C_ISR_INIT, _ISR(i2c));
@@ -526,12 +586,25 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
 #endif
 
 	i2c_pxa_set_slave(i2c, 0);
+}
 
+static void i2c_pxa_enable(struct pxa_i2c *i2c)
+{
 	/* enable unit */
 	writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c));
 	udelay(100);
 }
 
+static void i2c_pxa_reset(struct pxa_i2c *i2c)
+{
+	pr_debug("Resetting I2C Controller Unit\n");
+
+	/* abort any transfer currently under way */
+	i2c_pxa_abort(i2c);
+	i2c_pxa_do_reset(i2c);
+	i2c_pxa_enable(i2c);
+}
+
 
 #ifdef CONFIG_I2C_PXA_SLAVE
 /*
@@ -596,7 +669,7 @@ static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
 	timeout = 0x10000;
 
 	while (1) {
-		if ((readl(_IBMR(i2c)) & 2) == 2)
+		if ((readl(_IBMR(i2c)) & IBMR_SCLS) == IBMR_SCLS)
 			break;
 
 		timeout--;
@@ -691,7 +764,7 @@ static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
 	timeout = 0x10000;
 
 	while (1) {
-		if ((readl(_IBMR(i2c)) & 2) == 2)
+		if ((readl(_IBMR(i2c)) & IBMR_SCLS) == IBMR_SCLS)
 			break;
 
 		timeout--;
@@ -716,16 +789,6 @@ static void i2c_pxa_slave_stop(struct pxa_i2c *i2c)
  * PXA I2C Master mode
  */
 
-static inline unsigned int i2c_pxa_addr_byte(struct i2c_msg *msg)
-{
-	unsigned int addr = (msg->addr & 0x7f) << 1;
-
-	if (msg->flags & I2C_M_RD)
-		addr |= 1;
-
-	return addr;
-}
-
 static inline void i2c_pxa_start_message(struct pxa_i2c *i2c)
 {
 	u32 icr;
@@ -733,8 +796,8 @@ static inline void i2c_pxa_start_message(struct pxa_i2c *i2c)
 	/*
 	 * Step 1: target slave address into IDBR
 	 */
-	writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c));
-	i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg);
+	i2c->req_slave_addr = i2c_8bit_addr_from_msg(i2c->msg);
+	writel(i2c->req_slave_addr, _IDBR(i2c));
 
 	/*
 	 * Step 2: initiate the write.
@@ -747,42 +810,12 @@ static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c)
 {
 	u32 icr;
 
-	/*
-	 * Clear the STOP and ACK flags
-	 */
+	/* Clear the START, STOP, ACK, TB and MA flags */
 	icr = readl(_ICR(i2c));
-	icr &= ~(ICR_STOP | ICR_ACKNAK);
+	icr &= ~(ICR_START | ICR_STOP | ICR_ACKNAK | ICR_TB | ICR_MA);
 	writel(icr, _ICR(i2c));
 }
 
-static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c)
-{
-	/* make timeout the same as for interrupt based functions */
-	long timeout = 2 * DEF_TIMEOUT;
-
-	/*
-	 * Wait for the bus to become free.
-	 */
-	while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) {
-		udelay(1000);
-		show_state(i2c);
-	}
-
-	if (timeout < 0) {
-		show_state(i2c);
-		dev_err(&i2c->adap.dev,
-			"i2c_pxa: timeout waiting for bus free\n");
-		return I2C_RETRY;
-	}
-
-	/*
-	 * Set master mode.
-	 */
-	writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c));
-
-	return 0;
-}
-
 /*
  * PXA I2C send master code
  * 1. Load master code to IDBR and send it.
@@ -811,140 +844,6 @@ static int i2c_pxa_send_mastercode(struct pxa_i2c *i2c)
 	return (timeout == 0) ? I2C_RETRY : 0;
 }
 
-static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c,
-			       struct i2c_msg *msg, int num)
-{
-	unsigned long timeout = 500000; /* 5 seconds */
-	int ret = 0;
-
-	ret = i2c_pxa_pio_set_master(i2c);
-	if (ret)
-		goto out;
-
-	i2c->msg = msg;
-	i2c->msg_num = num;
-	i2c->msg_idx = 0;
-	i2c->msg_ptr = 0;
-	i2c->irqlogidx = 0;
-
-	i2c_pxa_start_message(i2c);
-
-	while (i2c->msg_num > 0 && --timeout) {
-		i2c_pxa_handler(0, i2c);
-		udelay(10);
-	}
-
-	i2c_pxa_stop_message(i2c);
-
-	/*
-	 * We place the return code in i2c->msg_idx.
-	 */
-	ret = i2c->msg_idx;
-
-out:
-	if (timeout == 0) {
-		i2c_pxa_scream_blue_murder(i2c, "timeout");
-		ret = I2C_RETRY;
-	}
-
-	return ret;
-}
-
-/*
- * We are protected by the adapter bus mutex.
- */
-static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
-{
-	long timeout;
-	int ret;
-
-	/*
-	 * Wait for the bus to become free.
-	 */
-	ret = i2c_pxa_wait_bus_not_busy(i2c);
-	if (ret) {
-		dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n");
-		goto out;
-	}
-
-	/*
-	 * Set master mode.
-	 */
-	ret = i2c_pxa_set_master(i2c);
-	if (ret) {
-		dev_err(&i2c->adap.dev, "i2c_pxa_set_master: error %d\n", ret);
-		goto out;
-	}
-
-	if (i2c->high_mode) {
-		ret = i2c_pxa_send_mastercode(i2c);
-		if (ret) {
-			dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n");
-			goto out;
-			}
-	}
-
-	spin_lock_irq(&i2c->lock);
-
-	i2c->msg = msg;
-	i2c->msg_num = num;
-	i2c->msg_idx = 0;
-	i2c->msg_ptr = 0;
-	i2c->irqlogidx = 0;
-
-	i2c_pxa_start_message(i2c);
-
-	spin_unlock_irq(&i2c->lock);
-
-	/*
-	 * The rest of the processing occurs in the interrupt handler.
-	 */
-	timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
-	i2c_pxa_stop_message(i2c);
-
-	/*
-	 * We place the return code in i2c->msg_idx.
-	 */
-	ret = i2c->msg_idx;
-
-	if (!timeout && i2c->msg_num) {
-		i2c_pxa_scream_blue_murder(i2c, "timeout");
-		ret = I2C_RETRY;
-	}
-
- out:
-	return ret;
-}
-
-static int i2c_pxa_pio_xfer(struct i2c_adapter *adap,
-			    struct i2c_msg msgs[], int num)
-{
-	struct pxa_i2c *i2c = adap->algo_data;
-	int ret, i;
-
-	/* If the I2C controller is disabled we need to reset it
-	  (probably due to a suspend/resume destroying state). We do
-	  this here as we can then avoid worrying about resuming the
-	  controller before its users. */
-	if (!(readl(_ICR(i2c)) & ICR_IUE))
-		i2c_pxa_reset(i2c);
-
-	for (i = adap->retries; i >= 0; i--) {
-		ret = i2c_pxa_do_pio_xfer(i2c, msgs, num);
-		if (ret != I2C_RETRY)
-			goto out;
-
-		if (i2c_debug)
-			dev_dbg(&adap->dev, "Retrying transmission\n");
-		udelay(100);
-	}
-	i2c_pxa_scream_blue_murder(i2c, "exhausted retries");
-	ret = -EREMOTEIO;
- out:
-	i2c_pxa_set_slave(i2c, ret);
-	return ret;
-}
-
 /*
  * i2c_pxa_master_complete - complete the message and wake up.
  */
@@ -996,7 +895,7 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr)
 		 */
 		if (isr & ISR_ACKNAK) {
 			if (i2c->msg_ptr == 0 && i2c->msg_idx == 0)
-				ret = I2C_RETRY;
+				ret = NO_SLAVE;
 			else
 				ret = XFER_NAKED;
 		}
@@ -1047,8 +946,8 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr)
 		/*
 		 * Write the next address.
 		 */
-		writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c));
-		i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg);
+		i2c->req_slave_addr = i2c_8bit_addr_from_msg(i2c->msg);
+		writel(i2c->req_slave_addr, _IDBR(i2c));
 
 		/*
 		 * And trigger a repeated start, and send the byte.
@@ -1056,14 +955,8 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr)
 		icr &= ~ICR_ALDIE;
 		icr |= ICR_START | ICR_TB;
 	} else {
-		if (i2c->msg->len == 0) {
-			/*
-			 * Device probes have a message length of zero
-			 * and need the bus to be reset before it can
-			 * be used again.
-			 */
-			i2c_pxa_reset(i2c);
-		}
+		if (i2c->msg->len == 0)
+			icr |= ICR_MA;
 		i2c_pxa_master_complete(i2c, 0);
 	}
 
@@ -1151,28 +1044,108 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/*
+ * We are protected by the adapter bus mutex.
+ */
+static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
+{
+	long timeout;
+	int ret;
+
+	/*
+	 * Wait for the bus to become free.
+	 */
+	ret = i2c_pxa_wait_bus_not_busy(i2c);
+	if (ret) {
+		dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n");
+		i2c_recover_bus(&i2c->adap);
+		goto out;
+	}
+
+	/*
+	 * Set master mode.
+	 */
+	ret = i2c_pxa_set_master(i2c);
+	if (ret) {
+		dev_err(&i2c->adap.dev, "i2c_pxa_set_master: error %d\n", ret);
+		goto out;
+	}
+
+	if (i2c->high_mode) {
+		ret = i2c_pxa_send_mastercode(i2c);
+		if (ret) {
+			dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n");
+			goto out;
+			}
+	}
+
+	spin_lock_irq(&i2c->lock);
+
+	i2c->msg = msg;
+	i2c->msg_num = num;
+	i2c->msg_idx = 0;
+	i2c->msg_ptr = 0;
+	i2c->irqlogidx = 0;
+
+	i2c_pxa_start_message(i2c);
+
+	spin_unlock_irq(&i2c->lock);
+
+	/*
+	 * The rest of the processing occurs in the interrupt handler.
+	 */
+	timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
+	i2c_pxa_stop_message(i2c);
+
+	/*
+	 * We place the return code in i2c->msg_idx.
+	 */
+	ret = i2c->msg_idx;
+
+	if (!timeout && i2c->msg_num) {
+		i2c_pxa_scream_blue_murder(i2c, "timeout with active message");
+		i2c_recover_bus(&i2c->adap);
+		ret = I2C_RETRY;
+	}
 
-static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+ out:
+	return ret;
+}
+
+static int i2c_pxa_internal_xfer(struct pxa_i2c *i2c,
+				 struct i2c_msg *msgs, int num,
+				 int (*xfer)(struct pxa_i2c *,
+					     struct i2c_msg *, int num))
 {
-	struct pxa_i2c *i2c = adap->algo_data;
 	int ret, i;
 
-	for (i = adap->retries; i >= 0; i--) {
-		ret = i2c_pxa_do_xfer(i2c, msgs, num);
-		if (ret != I2C_RETRY)
+	for (i = 0; ; ) {
+		ret = xfer(i2c, msgs, num);
+		if (ret != I2C_RETRY && ret != NO_SLAVE)
 			goto out;
+		if (++i >= i2c->adap.retries)
+			break;
 
 		if (i2c_debug)
-			dev_dbg(&adap->dev, "Retrying transmission\n");
+			dev_dbg(&i2c->adap.dev, "Retrying transmission\n");
 		udelay(100);
 	}
-	i2c_pxa_scream_blue_murder(i2c, "exhausted retries");
+	if (ret != NO_SLAVE)
+		i2c_pxa_scream_blue_murder(i2c, "exhausted retries");
 	ret = -EREMOTEIO;
  out:
 	i2c_pxa_set_slave(i2c, ret);
 	return ret;
 }
 
+static int i2c_pxa_xfer(struct i2c_adapter *adap,
+			struct i2c_msg msgs[], int num)
+{
+	struct pxa_i2c *i2c = adap->algo_data;
+
+	return i2c_pxa_internal_xfer(i2c, msgs, num, i2c_pxa_do_xfer);
+}
+
 static u32 i2c_pxa_functionality(struct i2c_adapter *adap)
 {
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
@@ -1188,6 +1161,87 @@ static const struct i2c_algorithm i2c_pxa_algorithm = {
 #endif
 };
 
+/* Non-interrupt mode support */
+static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c)
+{
+	/* make timeout the same as for interrupt based functions */
+	long timeout = 2 * DEF_TIMEOUT;
+
+	/*
+	 * Wait for the bus to become free.
+	 */
+	while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB))
+		udelay(1000);
+
+	if (timeout < 0) {
+		show_state(i2c);
+		dev_err(&i2c->adap.dev,
+			"i2c_pxa: timeout waiting for bus free (set_master)\n");
+		return I2C_RETRY;
+	}
+
+	/*
+	 * Set master mode.
+	 */
+	writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c));
+
+	return 0;
+}
+
+static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c,
+			       struct i2c_msg *msg, int num)
+{
+	unsigned long timeout = 500000; /* 5 seconds */
+	int ret = 0;
+
+	ret = i2c_pxa_pio_set_master(i2c);
+	if (ret)
+		goto out;
+
+	i2c->msg = msg;
+	i2c->msg_num = num;
+	i2c->msg_idx = 0;
+	i2c->msg_ptr = 0;
+	i2c->irqlogidx = 0;
+
+	i2c_pxa_start_message(i2c);
+
+	while (i2c->msg_num > 0 && --timeout) {
+		i2c_pxa_handler(0, i2c);
+		udelay(10);
+	}
+
+	i2c_pxa_stop_message(i2c);
+
+	/*
+	 * We place the return code in i2c->msg_idx.
+	 */
+	ret = i2c->msg_idx;
+
+out:
+	if (timeout == 0) {
+		i2c_pxa_scream_blue_murder(i2c, "timeout (do_pio_xfer)");
+		ret = I2C_RETRY;
+	}
+
+	return ret;
+}
+
+static int i2c_pxa_pio_xfer(struct i2c_adapter *adap,
+			    struct i2c_msg msgs[], int num)
+{
+	struct pxa_i2c *i2c = adap->algo_data;
+
+	/* If the I2C controller is disabled we need to reset it
+	  (probably due to a suspend/resume destroying state). We do
+	  this here as we can then avoid worrying about resuming the
+	  controller before its users. */
+	if (!(readl(_ICR(i2c)) & ICR_IUE))
+		i2c_pxa_reset(i2c);
+
+	return i2c_pxa_internal_xfer(i2c, msgs, num, i2c_pxa_do_pio_xfer);
+}
+
 static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
 	.master_xfer	= i2c_pxa_pio_xfer,
 	.functionality	= i2c_pxa_functionality,
@@ -1197,15 +1251,6 @@ static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
 #endif
 };
 
-static const struct of_device_id i2c_pxa_dt_ids[] = {
-	{ .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX },
-	{ .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX },
-	{ .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 },
-	{ .compatible = "marvell,armada-3700-i2c", .data = (void *)REGS_A3700 },
-	{}
-};
-MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
-
 static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
 			    enum pxa_i2c_types *i2c_types)
 {
@@ -1249,6 +1294,131 @@ static int i2c_pxa_probe_pdata(struct platform_device *pdev,
 	return 0;
 }
 
+static void i2c_pxa_prepare_recovery(struct i2c_adapter *adap)
+{
+	struct pxa_i2c *i2c = adap->algo_data;
+	u32 ibmr = readl(_IBMR(i2c));
+
+	/*
+	 * Program the GPIOs to reflect the current I2C bus state while
+	 * we transition to recovery; this avoids glitching the bus.
+	 */
+	gpiod_set_value(i2c->recovery.scl_gpiod, ibmr & IBMR_SCLS);
+	gpiod_set_value(i2c->recovery.sda_gpiod, ibmr & IBMR_SDAS);
+
+	WARN_ON(pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_recovery));
+}
+
+static void i2c_pxa_unprepare_recovery(struct i2c_adapter *adap)
+{
+	struct pxa_i2c *i2c = adap->algo_data;
+	u32 isr;
+
+	/*
+	 * The bus should now be free. Clear up the I2C controller before
+	 * handing control of the bus back to avoid the bus changing state.
+	 */
+	isr = readl(_ISR(i2c));
+	if (isr & (ISR_UB | ISR_IBB)) {
+		dev_dbg(&i2c->adap.dev,
+			"recovery: resetting controller, ISR=0x%08x\n", isr);
+		i2c_pxa_do_reset(i2c);
+	}
+
+	WARN_ON(pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_default));
+
+	dev_dbg(&i2c->adap.dev, "recovery: IBMR 0x%08x ISR 0x%08x\n",
+	        readl(_IBMR(i2c)), readl(_ISR(i2c)));
+
+	i2c_pxa_enable(i2c);
+}
+
+static int i2c_pxa_init_recovery(struct pxa_i2c *i2c)
+{
+	struct i2c_bus_recovery_info *bri = &i2c->recovery;
+	struct device *dev = i2c->adap.dev.parent;
+
+	/*
+	 * When slave mode is enabled, we are not the only master on the bus.
+	 * Bus recovery can only be performed when we are the master, which
+	 * we can't be certain of. Therefore, when slave mode is enabled, do
+	 * not configure bus recovery.
+	 */
+	if (IS_ENABLED(CONFIG_I2C_PXA_SLAVE))
+		return 0;
+
+	i2c->pinctrl = devm_pinctrl_get(dev);
+	if (PTR_ERR(i2c->pinctrl) == -ENODEV)
+		i2c->pinctrl = NULL;
+	if (IS_ERR(i2c->pinctrl))
+		return PTR_ERR(i2c->pinctrl);
+
+	if (!i2c->pinctrl)
+		return 0;
+
+	i2c->pinctrl_default = pinctrl_lookup_state(i2c->pinctrl,
+						    PINCTRL_STATE_DEFAULT);
+	i2c->pinctrl_recovery = pinctrl_lookup_state(i2c->pinctrl, "recovery");
+
+	if (IS_ERR(i2c->pinctrl_default) || IS_ERR(i2c->pinctrl_recovery)) {
+		dev_info(dev, "missing pinmux recovery information: %ld %ld\n",
+			 PTR_ERR(i2c->pinctrl_default),
+			 PTR_ERR(i2c->pinctrl_recovery));
+		return 0;
+	}
+
+	/*
+	 * Claiming GPIOs can influence the pinmux state, and may glitch the
+	 * I2C bus. Do this carefully.
+	 */
+	bri->scl_gpiod = devm_gpiod_get(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN);
+	if (bri->scl_gpiod == ERR_PTR(-EPROBE_DEFER))
+		return -EPROBE_DEFER;
+	if (IS_ERR(bri->scl_gpiod)) {
+		dev_info(dev, "missing scl gpio recovery information: %pe\n",
+			 bri->scl_gpiod);
+		return 0;
+	}
+
+	/*
+	 * We have SCL. Pull SCL low and wait a bit so that SDA glitches
+	 * have no effect.
+	 */
+	gpiod_direction_output(bri->scl_gpiod, 0);
+	udelay(10);
+	bri->sda_gpiod = devm_gpiod_get(dev, "sda", GPIOD_OUT_HIGH_OPEN_DRAIN);
+
+	/* Wait a bit in case of a SDA glitch, and then release SCL. */
+	udelay(10);
+	gpiod_direction_output(bri->scl_gpiod, 1);
+
+	if (bri->sda_gpiod == ERR_PTR(-EPROBE_DEFER))
+		return -EPROBE_DEFER;
+
+	if (IS_ERR(bri->sda_gpiod)) {
+		dev_info(dev, "missing sda gpio recovery information: %pe\n",
+			 bri->sda_gpiod);
+		return 0;
+	}
+
+	bri->prepare_recovery = i2c_pxa_prepare_recovery;
+	bri->unprepare_recovery = i2c_pxa_unprepare_recovery;
+	bri->recover_bus = i2c_generic_scl_recovery;
+
+	i2c->adap.bus_recovery_info = bri;
+
+	/*
+	 * Claiming GPIOs can change the pinmux state, which confuses the
+	 * pinctrl since pinctrl's idea of the current setting is unaffected
+	 * by the pinmux change caused by claiming the GPIO. Work around that
+	 * by switching pinctrl to the GPIO state here. We do it this way to
+	 * avoid glitching the I2C bus.
+	 */
+	pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_recovery);
+
+	return pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_default);
+}
+
 static int i2c_pxa_probe(struct platform_device *dev)
 {
 	struct i2c_pxa_platform_data *plat = dev_get_platdata(&dev->dev);
@@ -1261,19 +1431,28 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	if (!i2c)
 		return -ENOMEM;
 
+	/* Default adapter num to device id; i2c_pxa_probe_dt can override. */
+	i2c->adap.nr = dev->id;
+	i2c->adap.owner   = THIS_MODULE;
+	i2c->adap.retries = 5;
+	i2c->adap.algo_data = i2c;
+	i2c->adap.dev.parent = &dev->dev;
+#ifdef CONFIG_OF
+	i2c->adap.dev.of_node = dev->dev.of_node;
+#endif
+
 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	i2c->reg_base = devm_ioremap_resource(&dev->dev, res);
 	if (IS_ERR(i2c->reg_base))
 		return PTR_ERR(i2c->reg_base);
 
 	irq = platform_get_irq(dev, 0);
-	if (irq < 0) {
-		dev_err(&dev->dev, "no irq resource: %d\n", irq);
+	if (irq < 0)
 		return irq;
-	}
 
-	/* Default adapter num to device id; i2c_pxa_probe_dt can override. */
-	i2c->adap.nr = dev->id;
+	ret = i2c_pxa_init_recovery(i2c);
+	if (ret)
+		return ret;
 
 	ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type);
 	if (ret > 0)
@@ -1281,9 +1460,6 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	if (ret < 0)
 		return ret;
 
-	i2c->adap.owner   = THIS_MODULE;
-	i2c->adap.retries = 5;
-
 	spin_lock_init(&i2c->lock);
 	init_waitqueue_head(&i2c->wait);
 
@@ -1299,8 +1475,8 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr;
 	i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr;
 	i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr;
-	i2c->fm_mask = pxa_reg_layout[i2c_type].fm ? : ICR_FM;
-	i2c->hs_mask = pxa_reg_layout[i2c_type].hs ? : ICR_HS;
+	i2c->fm_mask = pxa_reg_layout[i2c_type].fm;
+	i2c->hs_mask = pxa_reg_layout[i2c_type].hs;
 
 	if (i2c_type != REGS_CE4100)
 		i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar;
@@ -1349,12 +1525,6 @@ static int i2c_pxa_probe(struct platform_device *dev)
 
 	i2c_pxa_reset(i2c);
 
-	i2c->adap.algo_data = i2c;
-	i2c->adap.dev.parent = &dev->dev;
-#ifdef CONFIG_OF
-	i2c->adap.dev.of_node = dev->dev.of_node;
-#endif
-
 	ret = i2c_add_numbered_adapter(&i2c->adap);
 	if (ret < 0)
 		goto ereqirq;
diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c
new file mode 100644
index 000000000000..f13735beca58
--- /dev/null
+++ b/drivers/i2c/busses/i2c-qcom-cci.c
@@ -0,0 +1,791 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2012-2016, The Linux Foundation. All rights reserved.
+// Copyright (c) 2017-20 Linaro Limited.
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define CCI_HW_VERSION				0x0
+#define CCI_RESET_CMD				0x004
+#define CCI_RESET_CMD_MASK			0x0f73f3f7
+#define CCI_RESET_CMD_M0_MASK			0x000003f1
+#define CCI_RESET_CMD_M1_MASK			0x0003f001
+#define CCI_QUEUE_START				0x008
+#define CCI_HALT_REQ				0x034
+#define CCI_HALT_REQ_I2C_M0_Q0Q1		BIT(0)
+#define CCI_HALT_REQ_I2C_M1_Q0Q1		BIT(1)
+
+#define CCI_I2C_Mm_SCL_CTL(m)			(0x100 + 0x100 * (m))
+#define CCI_I2C_Mm_SDA_CTL_0(m)			(0x104 + 0x100 * (m))
+#define CCI_I2C_Mm_SDA_CTL_1(m)			(0x108 + 0x100 * (m))
+#define CCI_I2C_Mm_SDA_CTL_2(m)			(0x10c + 0x100 * (m))
+#define CCI_I2C_Mm_MISC_CTL(m)			(0x110 + 0x100 * (m))
+
+#define CCI_I2C_Mm_READ_DATA(m)			(0x118 + 0x100 * (m))
+#define CCI_I2C_Mm_READ_BUF_LEVEL(m)		(0x11c + 0x100 * (m))
+#define CCI_I2C_Mm_Qn_EXEC_WORD_CNT(m, n)	(0x300 + 0x200 * (m) + 0x100 * (n))
+#define CCI_I2C_Mm_Qn_CUR_WORD_CNT(m, n)	(0x304 + 0x200 * (m) + 0x100 * (n))
+#define CCI_I2C_Mm_Qn_CUR_CMD(m, n)		(0x308 + 0x200 * (m) + 0x100 * (n))
+#define CCI_I2C_Mm_Qn_REPORT_STATUS(m, n)	(0x30c + 0x200 * (m) + 0x100 * (n))
+#define CCI_I2C_Mm_Qn_LOAD_DATA(m, n)		(0x310 + 0x200 * (m) + 0x100 * (n))
+
+#define CCI_IRQ_GLOBAL_CLEAR_CMD		0xc00
+#define CCI_IRQ_MASK_0				0xc04
+#define CCI_IRQ_MASK_0_I2C_M0_RD_DONE		BIT(0)
+#define CCI_IRQ_MASK_0_I2C_M0_Q0_REPORT		BIT(4)
+#define CCI_IRQ_MASK_0_I2C_M0_Q1_REPORT		BIT(8)
+#define CCI_IRQ_MASK_0_I2C_M1_RD_DONE		BIT(12)
+#define CCI_IRQ_MASK_0_I2C_M1_Q0_REPORT		BIT(16)
+#define CCI_IRQ_MASK_0_I2C_M1_Q1_REPORT		BIT(20)
+#define CCI_IRQ_MASK_0_RST_DONE_ACK		BIT(24)
+#define CCI_IRQ_MASK_0_I2C_M0_Q0Q1_HALT_ACK	BIT(25)
+#define CCI_IRQ_MASK_0_I2C_M1_Q0Q1_HALT_ACK	BIT(26)
+#define CCI_IRQ_MASK_0_I2C_M0_ERROR		0x18000ee6
+#define CCI_IRQ_MASK_0_I2C_M1_ERROR		0x60ee6000
+#define CCI_IRQ_CLEAR_0				0xc08
+#define CCI_IRQ_STATUS_0			0xc0c
+#define CCI_IRQ_STATUS_0_I2C_M0_RD_DONE		BIT(0)
+#define CCI_IRQ_STATUS_0_I2C_M0_Q0_REPORT	BIT(4)
+#define CCI_IRQ_STATUS_0_I2C_M0_Q1_REPORT	BIT(8)
+#define CCI_IRQ_STATUS_0_I2C_M1_RD_DONE		BIT(12)
+#define CCI_IRQ_STATUS_0_I2C_M1_Q0_REPORT	BIT(16)
+#define CCI_IRQ_STATUS_0_I2C_M1_Q1_REPORT	BIT(20)
+#define CCI_IRQ_STATUS_0_RST_DONE_ACK		BIT(24)
+#define CCI_IRQ_STATUS_0_I2C_M0_Q0Q1_HALT_ACK	BIT(25)
+#define CCI_IRQ_STATUS_0_I2C_M1_Q0Q1_HALT_ACK	BIT(26)
+#define CCI_IRQ_STATUS_0_I2C_M0_Q0_NACK_ERR	BIT(27)
+#define CCI_IRQ_STATUS_0_I2C_M0_Q1_NACK_ERR	BIT(28)
+#define CCI_IRQ_STATUS_0_I2C_M1_Q0_NACK_ERR	BIT(29)
+#define CCI_IRQ_STATUS_0_I2C_M1_Q1_NACK_ERR	BIT(30)
+#define CCI_IRQ_STATUS_0_I2C_M0_ERROR		0x18000ee6
+#define CCI_IRQ_STATUS_0_I2C_M1_ERROR		0x60ee6000
+
+#define CCI_TIMEOUT	(msecs_to_jiffies(100))
+#define NUM_MASTERS	2
+#define NUM_QUEUES	2
+
+/* Max number of resources + 1 for a NULL terminator */
+#define CCI_RES_MAX	6
+
+#define CCI_I2C_SET_PARAM	1
+#define CCI_I2C_REPORT		8
+#define CCI_I2C_WRITE		9
+#define CCI_I2C_READ		10
+
+#define CCI_I2C_REPORT_IRQ_EN	BIT(8)
+
+enum {
+	I2C_MODE_STANDARD,
+	I2C_MODE_FAST,
+	I2C_MODE_FAST_PLUS,
+};
+
+enum cci_i2c_queue_t {
+	QUEUE_0,
+	QUEUE_1
+};
+
+struct hw_params {
+	u16 thigh; /* HIGH period of the SCL clock in clock ticks */
+	u16 tlow; /* LOW period of the SCL clock */
+	u16 tsu_sto; /* set-up time for STOP condition */
+	u16 tsu_sta; /* set-up time for a repeated START condition */
+	u16 thd_dat; /* data hold time */
+	u16 thd_sta; /* hold time (repeated) START condition */
+	u16 tbuf; /* bus free time between a STOP and START condition */
+	u8 scl_stretch_en;
+	u16 trdhld;
+	u16 tsp; /* pulse width of spikes suppressed by the input filter */
+};
+
+struct cci;
+
+struct cci_master {
+	struct i2c_adapter adap;
+	u16 master;
+	u8 mode;
+	int status;
+	struct completion irq_complete;
+	struct cci *cci;
+};
+
+struct cci_data {
+	unsigned int num_masters;
+	struct i2c_adapter_quirks quirks;
+	u16 queue_size[NUM_QUEUES];
+	unsigned long cci_clk_rate;
+	struct hw_params params[3];
+};
+
+struct cci {
+	struct device *dev;
+	void __iomem *base;
+	unsigned int irq;
+	const struct cci_data *data;
+	struct clk_bulk_data *clocks;
+	int nclocks;
+	struct cci_master master[NUM_MASTERS];
+};
+
+static irqreturn_t cci_isr(int irq, void *dev)
+{
+	struct cci *cci = dev;
+	u32 val, reset = 0;
+	int ret = IRQ_NONE;
+
+	val = readl(cci->base + CCI_IRQ_STATUS_0);
+	writel(val, cci->base + CCI_IRQ_CLEAR_0);
+	writel(0x1, cci->base + CCI_IRQ_GLOBAL_CLEAR_CMD);
+
+	if (val & CCI_IRQ_STATUS_0_RST_DONE_ACK) {
+		complete(&cci->master[0].irq_complete);
+		if (cci->master[1].master)
+			complete(&cci->master[1].irq_complete);
+		ret = IRQ_HANDLED;
+	}
+
+	if (val & CCI_IRQ_STATUS_0_I2C_M0_RD_DONE ||
+			val & CCI_IRQ_STATUS_0_I2C_M0_Q0_REPORT ||
+			val & CCI_IRQ_STATUS_0_I2C_M0_Q1_REPORT) {
+		cci->master[0].status = 0;
+		complete(&cci->master[0].irq_complete);
+		ret = IRQ_HANDLED;
+	}
+
+	if (val & CCI_IRQ_STATUS_0_I2C_M1_RD_DONE ||
+			val & CCI_IRQ_STATUS_0_I2C_M1_Q0_REPORT ||
+			val & CCI_IRQ_STATUS_0_I2C_M1_Q1_REPORT) {
+		cci->master[1].status = 0;
+		complete(&cci->master[1].irq_complete);
+		ret = IRQ_HANDLED;
+	}
+
+	if (unlikely(val & CCI_IRQ_STATUS_0_I2C_M0_Q0Q1_HALT_ACK)) {
+		reset = CCI_RESET_CMD_M0_MASK;
+		ret = IRQ_HANDLED;
+	}
+
+	if (unlikely(val & CCI_IRQ_STATUS_0_I2C_M1_Q0Q1_HALT_ACK)) {
+		reset = CCI_RESET_CMD_M1_MASK;
+		ret = IRQ_HANDLED;
+	}
+
+	if (unlikely(reset))
+		writel(reset, cci->base + CCI_RESET_CMD);
+
+	if (unlikely(val & CCI_IRQ_STATUS_0_I2C_M0_ERROR)) {
+		if (val & CCI_IRQ_STATUS_0_I2C_M0_Q0_NACK_ERR ||
+			val & CCI_IRQ_STATUS_0_I2C_M0_Q1_NACK_ERR)
+			cci->master[0].status = -ENXIO;
+		else
+			cci->master[0].status = -EIO;
+
+		writel(CCI_HALT_REQ_I2C_M0_Q0Q1, cci->base + CCI_HALT_REQ);
+		ret = IRQ_HANDLED;
+	}
+
+	if (unlikely(val & CCI_IRQ_STATUS_0_I2C_M1_ERROR)) {
+		if (val & CCI_IRQ_STATUS_0_I2C_M1_Q0_NACK_ERR ||
+			val & CCI_IRQ_STATUS_0_I2C_M1_Q1_NACK_ERR)
+			cci->master[0].status = -ENXIO;
+		else
+			cci->master[0].status = -EIO;
+
+		writel(CCI_HALT_REQ_I2C_M1_Q0Q1, cci->base + CCI_HALT_REQ);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static int cci_halt(struct cci *cci, u8 master_num)
+{
+	struct cci_master *master;
+	u32 val;
+
+	if (master_num >= cci->data->num_masters) {
+		dev_err(cci->dev, "Unsupported master idx (%u)\n", master_num);
+		return -EINVAL;
+	}
+
+	val = BIT(master_num);
+	master = &cci->master[master_num];
+
+	reinit_completion(&master->irq_complete);
+	writel(val, cci->base + CCI_HALT_REQ);
+
+	if (!wait_for_completion_timeout(&master->irq_complete, CCI_TIMEOUT)) {
+		dev_err(cci->dev, "CCI halt timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int cci_reset(struct cci *cci)
+{
+	/*
+	 * we reset the whole controller, here and for implicity use
+	 * master[0].xxx for waiting on it.
+	 */
+	reinit_completion(&cci->master[0].irq_complete);
+	writel(CCI_RESET_CMD_MASK, cci->base + CCI_RESET_CMD);
+
+	if (!wait_for_completion_timeout(&cci->master[0].irq_complete,
+					 CCI_TIMEOUT)) {
+		dev_err(cci->dev, "CCI reset timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int cci_init(struct cci *cci)
+{
+	u32 val = CCI_IRQ_MASK_0_I2C_M0_RD_DONE |
+			CCI_IRQ_MASK_0_I2C_M0_Q0_REPORT |
+			CCI_IRQ_MASK_0_I2C_M0_Q1_REPORT |
+			CCI_IRQ_MASK_0_I2C_M1_RD_DONE |
+			CCI_IRQ_MASK_0_I2C_M1_Q0_REPORT |
+			CCI_IRQ_MASK_0_I2C_M1_Q1_REPORT |
+			CCI_IRQ_MASK_0_RST_DONE_ACK |
+			CCI_IRQ_MASK_0_I2C_M0_Q0Q1_HALT_ACK |
+			CCI_IRQ_MASK_0_I2C_M1_Q0Q1_HALT_ACK |
+			CCI_IRQ_MASK_0_I2C_M0_ERROR |
+			CCI_IRQ_MASK_0_I2C_M1_ERROR;
+	int i;
+
+	writel(val, cci->base + CCI_IRQ_MASK_0);
+
+	for (i = 0; i < cci->data->num_masters; i++) {
+		int mode = cci->master[i].mode;
+		const struct hw_params *hw;
+
+		if (!cci->master[i].cci)
+			continue;
+
+		hw = &cci->data->params[mode];
+
+		val = hw->thigh << 16 | hw->tlow;
+		writel(val, cci->base + CCI_I2C_Mm_SCL_CTL(i));
+
+		val = hw->tsu_sto << 16 | hw->tsu_sta;
+		writel(val, cci->base + CCI_I2C_Mm_SDA_CTL_0(i));
+
+		val = hw->thd_dat << 16 | hw->thd_sta;
+		writel(val, cci->base + CCI_I2C_Mm_SDA_CTL_1(i));
+
+		val = hw->tbuf;
+		writel(val, cci->base + CCI_I2C_Mm_SDA_CTL_2(i));
+
+		val = hw->scl_stretch_en << 8 | hw->trdhld << 4 | hw->tsp;
+		writel(val, cci->base + CCI_I2C_Mm_MISC_CTL(i));
+	}
+
+	return 0;
+}
+
+static int cci_run_queue(struct cci *cci, u8 master, u8 queue)
+{
+	u32 val;
+
+	val = readl(cci->base + CCI_I2C_Mm_Qn_CUR_WORD_CNT(master, queue));
+	writel(val, cci->base + CCI_I2C_Mm_Qn_EXEC_WORD_CNT(master, queue));
+
+	reinit_completion(&cci->master[master].irq_complete);
+	val = BIT(master * 2 + queue);
+	writel(val, cci->base + CCI_QUEUE_START);
+
+	if (!wait_for_completion_timeout(&cci->master[master].irq_complete,
+					 CCI_TIMEOUT)) {
+		dev_err(cci->dev, "master %d queue %d timeout\n",
+			master, queue);
+		cci_reset(cci);
+		cci_init(cci);
+		return -ETIMEDOUT;
+	}
+
+	return cci->master[master].status;
+}
+
+static int cci_validate_queue(struct cci *cci, u8 master, u8 queue)
+{
+	u32 val;
+
+	val = readl(cci->base + CCI_I2C_Mm_Qn_CUR_WORD_CNT(master, queue));
+	if (val == cci->data->queue_size[queue])
+		return -EINVAL;
+
+	if (!val)
+		return 0;
+
+	val = CCI_I2C_REPORT | CCI_I2C_REPORT_IRQ_EN;
+	writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+
+	return cci_run_queue(cci, master, queue);
+}
+
+static int cci_i2c_read(struct cci *cci, u16 master,
+			u16 addr, u8 *buf, u16 len)
+{
+	u32 val, words_read, words_exp;
+	u8 queue = QUEUE_1;
+	int i, index = 0, ret;
+	bool first = true;
+
+	/*
+	 * Call validate queue to make sure queue is empty before starting.
+	 * This is to avoid overflow / underflow of queue.
+	 */
+	ret = cci_validate_queue(cci, master, queue);
+	if (ret < 0)
+		return ret;
+
+	val = CCI_I2C_SET_PARAM | (addr & 0x7f) << 4;
+	writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+
+	val = CCI_I2C_READ | len << 4;
+	writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+
+	ret = cci_run_queue(cci, master, queue);
+	if (ret < 0)
+		return ret;
+
+	words_read = readl(cci->base + CCI_I2C_Mm_READ_BUF_LEVEL(master));
+	words_exp = len / 4 + 1;
+	if (words_read != words_exp) {
+		dev_err(cci->dev, "words read = %d, words expected = %d\n",
+			words_read, words_exp);
+		return -EIO;
+	}
+
+	do {
+		val = readl(cci->base + CCI_I2C_Mm_READ_DATA(master));
+
+		for (i = 0; i < 4 && index < len; i++) {
+			if (first) {
+				/* The LS byte of this register represents the
+				 * first byte read from the slave during a read
+				 * access.
+				 */
+				first = false;
+				continue;
+			}
+			buf[index++] = (val >> (i * 8)) & 0xff;
+		}
+	} while (--words_read);
+
+	return 0;
+}
+
+static int cci_i2c_write(struct cci *cci, u16 master,
+			 u16 addr, u8 *buf, u16 len)
+{
+	u8 queue = QUEUE_0;
+	u8 load[12] = { 0 };
+	int i = 0, j, ret;
+	u32 val;
+
+	/*
+	 * Call validate queue to make sure queue is empty before starting.
+	 * This is to avoid overflow / underflow of queue.
+	 */
+	ret = cci_validate_queue(cci, master, queue);
+	if (ret < 0)
+		return ret;
+
+	val = CCI_I2C_SET_PARAM | (addr & 0x7f) << 4;
+	writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+
+	load[i++] = CCI_I2C_WRITE | len << 4;
+
+	for (j = 0; j < len; j++)
+		load[i++] = buf[j];
+
+	for (j = 0; j < i; j += 4) {
+		val = load[j];
+		val |= load[j + 1] << 8;
+		val |= load[j + 2] << 16;
+		val |= load[j + 3] << 24;
+		writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+	}
+
+	val = CCI_I2C_REPORT | CCI_I2C_REPORT_IRQ_EN;
+	writel(val, cci->base + CCI_I2C_Mm_Qn_LOAD_DATA(master, queue));
+
+	return cci_run_queue(cci, master, queue);
+}
+
+static int cci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct cci_master *cci_master = i2c_get_adapdata(adap);
+	struct cci *cci = cci_master->cci;
+	int i, ret;
+
+	ret = pm_runtime_get_sync(cci->dev);
+	if (ret < 0)
+		goto err;
+
+	for (i = 0; i < num; i++) {
+		if (msgs[i].flags & I2C_M_RD)
+			ret = cci_i2c_read(cci, cci_master->master,
+					   msgs[i].addr, msgs[i].buf,
+					   msgs[i].len);
+		else
+			ret = cci_i2c_write(cci, cci_master->master,
+					    msgs[i].addr, msgs[i].buf,
+					    msgs[i].len);
+
+		if (ret < 0)
+			break;
+	}
+
+	if (!ret)
+		ret = num;
+
+err:
+	pm_runtime_mark_last_busy(cci->dev);
+	pm_runtime_put_autosuspend(cci->dev);
+
+	return ret;
+}
+
+static u32 cci_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm cci_algo = {
+	.master_xfer	= cci_xfer,
+	.functionality	= cci_func,
+};
+
+static int cci_enable_clocks(struct cci *cci)
+{
+	return clk_bulk_prepare_enable(cci->nclocks, cci->clocks);
+}
+
+static void cci_disable_clocks(struct cci *cci)
+{
+	clk_bulk_disable_unprepare(cci->nclocks, cci->clocks);
+}
+
+static int __maybe_unused cci_suspend_runtime(struct device *dev)
+{
+	struct cci *cci = dev_get_drvdata(dev);
+
+	cci_disable_clocks(cci);
+	return 0;
+}
+
+static int __maybe_unused cci_resume_runtime(struct device *dev)
+{
+	struct cci *cci = dev_get_drvdata(dev);
+	int ret;
+
+	ret = cci_enable_clocks(cci);
+	if (ret)
+		return ret;
+
+	cci_init(cci);
+	return 0;
+}
+
+static int __maybe_unused cci_suspend(struct device *dev)
+{
+	if (!pm_runtime_suspended(dev))
+		return cci_suspend_runtime(dev);
+
+	return 0;
+}
+
+static int __maybe_unused cci_resume(struct device *dev)
+{
+	cci_resume_runtime(dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_request_autosuspend(dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops qcom_cci_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(cci_suspend, cci_resume)
+	SET_RUNTIME_PM_OPS(cci_suspend_runtime, cci_resume_runtime, NULL)
+};
+
+static int cci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	unsigned long cci_clk_rate = 0;
+	struct device_node *child;
+	struct resource *r;
+	struct cci *cci;
+	int ret, i;
+	u32 val;
+
+	cci = devm_kzalloc(dev, sizeof(*cci), GFP_KERNEL);
+	if (!cci)
+		return -ENOMEM;
+
+	cci->dev = dev;
+	platform_set_drvdata(pdev, cci);
+	cci->data = device_get_match_data(dev);
+	if (!cci->data)
+		return -ENOENT;
+
+	for_each_available_child_of_node(dev->of_node, child) {
+		u32 idx;
+
+		ret = of_property_read_u32(child, "reg", &idx);
+		if (ret) {
+			dev_err(dev, "%pOF invalid 'reg' property", child);
+			continue;
+		}
+
+		if (idx >= cci->data->num_masters) {
+			dev_err(dev, "%pOF invalid 'reg' value: %u (max is %u)",
+				child, idx, cci->data->num_masters - 1);
+			continue;
+		}
+
+		cci->master[idx].adap.quirks = &cci->data->quirks;
+		cci->master[idx].adap.algo = &cci_algo;
+		cci->master[idx].adap.dev.parent = dev;
+		cci->master[idx].adap.dev.of_node = child;
+		cci->master[idx].master = idx;
+		cci->master[idx].cci = cci;
+
+		i2c_set_adapdata(&cci->master[idx].adap, &cci->master[idx]);
+		snprintf(cci->master[idx].adap.name,
+			 sizeof(cci->master[idx].adap.name), "Qualcomm-CCI");
+
+		cci->master[idx].mode = I2C_MODE_STANDARD;
+		ret = of_property_read_u32(child, "clock-frequency", &val);
+		if (!ret) {
+			if (val == 400000)
+				cci->master[idx].mode = I2C_MODE_FAST;
+			else if (val == 1000000)
+				cci->master[idx].mode = I2C_MODE_FAST_PLUS;
+		}
+
+		init_completion(&cci->master[idx].irq_complete);
+	}
+
+	/* Memory */
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	cci->base = devm_ioremap_resource(dev, r);
+	if (IS_ERR(cci->base))
+		return PTR_ERR(cci->base);
+
+	/* Clocks */
+
+	ret = devm_clk_bulk_get_all(dev, &cci->clocks);
+	if (ret < 1) {
+		dev_err(dev, "failed to get clocks %d\n", ret);
+		return ret;
+	}
+	cci->nclocks = ret;
+
+	/* Retrieve CCI clock rate */
+	for (i = 0; i < cci->nclocks; i++) {
+		if (!strcmp(cci->clocks[i].id, "cci")) {
+			cci_clk_rate = clk_get_rate(cci->clocks[i].clk);
+			break;
+		}
+	}
+
+	if (cci_clk_rate != cci->data->cci_clk_rate) {
+		/* cci clock set by the bootloader or via assigned clock rate
+		 * in DT.
+		 */
+		dev_warn(dev, "Found %lu cci clk rate while %lu was expected\n",
+			 cci_clk_rate, cci->data->cci_clk_rate);
+	}
+
+	ret = cci_enable_clocks(cci);
+	if (ret < 0)
+		return ret;
+
+	/* Interrupt */
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		goto disable_clocks;
+	cci->irq = ret;
+
+	ret = devm_request_irq(dev, cci->irq, cci_isr, 0, dev_name(dev), cci);
+	if (ret < 0) {
+		dev_err(dev, "request_irq failed, ret: %d\n", ret);
+		goto disable_clocks;
+	}
+
+	val = readl(cci->base + CCI_HW_VERSION);
+	dev_dbg(dev, "CCI HW version = 0x%08x", val);
+
+	ret = cci_reset(cci);
+	if (ret < 0)
+		goto error;
+
+	ret = cci_init(cci);
+	if (ret < 0)
+		goto error;
+
+	for (i = 0; i < cci->data->num_masters; i++) {
+		if (!cci->master[i].cci)
+			continue;
+
+		ret = i2c_add_adapter(&cci->master[i].adap);
+		if (ret < 0)
+			goto error_i2c;
+	}
+
+	pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+
+error_i2c:
+	for (; i >= 0; i--) {
+		if (cci->master[i].cci)
+			i2c_del_adapter(&cci->master[i].adap);
+	}
+error:
+	disable_irq(cci->irq);
+disable_clocks:
+	cci_disable_clocks(cci);
+
+	return ret;
+}
+
+static int cci_remove(struct platform_device *pdev)
+{
+	struct cci *cci = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < cci->data->num_masters; i++) {
+		if (cci->master[i].cci)
+			i2c_del_adapter(&cci->master[i].adap);
+		cci_halt(cci, i);
+	}
+
+	disable_irq(cci->irq);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+
+	return 0;
+}
+
+static const struct cci_data cci_v1_data = {
+	.num_masters = 1,
+	.queue_size = { 64, 16 },
+	.quirks = {
+		.max_write_len = 10,
+		.max_read_len = 12,
+	},
+	.cci_clk_rate =  19200000,
+	.params[I2C_MODE_STANDARD] = {
+		.thigh = 78,
+		.tlow = 114,
+		.tsu_sto = 28,
+		.tsu_sta = 28,
+		.thd_dat = 10,
+		.thd_sta = 77,
+		.tbuf = 118,
+		.scl_stretch_en = 0,
+		.trdhld = 6,
+		.tsp = 1
+	},
+	.params[I2C_MODE_FAST] = {
+		.thigh = 20,
+		.tlow = 28,
+		.tsu_sto = 21,
+		.tsu_sta = 21,
+		.thd_dat = 13,
+		.thd_sta = 18,
+		.tbuf = 32,
+		.scl_stretch_en = 0,
+		.trdhld = 6,
+		.tsp = 3
+	},
+};
+
+static const struct cci_data cci_v2_data = {
+	.num_masters = 2,
+	.queue_size = { 64, 16 },
+	.quirks = {
+		.max_write_len = 11,
+		.max_read_len = 12,
+	},
+	.cci_clk_rate =  37500000,
+	.params[I2C_MODE_STANDARD] = {
+		.thigh = 201,
+		.tlow = 174,
+		.tsu_sto = 204,
+		.tsu_sta = 231,
+		.thd_dat = 22,
+		.thd_sta = 162,
+		.tbuf = 227,
+		.scl_stretch_en = 0,
+		.trdhld = 6,
+		.tsp = 3
+	},
+	.params[I2C_MODE_FAST] = {
+		.thigh = 38,
+		.tlow = 56,
+		.tsu_sto = 40,
+		.tsu_sta = 40,
+		.thd_dat = 22,
+		.thd_sta = 35,
+		.tbuf = 62,
+		.scl_stretch_en = 0,
+		.trdhld = 6,
+		.tsp = 3
+	},
+	.params[I2C_MODE_FAST_PLUS] = {
+		.thigh = 16,
+		.tlow = 22,
+		.tsu_sto = 17,
+		.tsu_sta = 18,
+		.thd_dat = 16,
+		.thd_sta = 15,
+		.tbuf = 24,
+		.scl_stretch_en = 0,
+		.trdhld = 3,
+		.tsp = 3
+	},
+};
+
+static const struct of_device_id cci_dt_match[] = {
+	{ .compatible = "qcom,msm8916-cci", .data = &cci_v1_data},
+	{ .compatible = "qcom,msm8996-cci", .data = &cci_v2_data},
+	{ .compatible = "qcom,sdm845-cci", .data = &cci_v2_data},
+	{}
+};
+MODULE_DEVICE_TABLE(of, cci_dt_match);
+
+static struct platform_driver qcom_cci_driver = {
+	.probe  = cci_probe,
+	.remove = cci_remove,
+	.driver = {
+		.name = "i2c-qcom-cci",
+		.of_match_table = cci_dt_match,
+		.pm = &qcom_cci_pm,
+	},
+};
+
+module_platform_driver(qcom_cci_driver);
+
+MODULE_DESCRIPTION("Qualcomm Camera Control Interface driver");
+MODULE_AUTHOR("Todor Tomov <todor.tomov@linaro.org>");
+MODULE_AUTHOR("Loic Poulain <loic.poulain@linaro.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 748872a9b0fc..fbc04b60cfd1 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -956,10 +956,8 @@ static void qup_i2c_conf_v1(struct qup_i2c_dev *qup)
 	u32 qup_config = I2C_MINI_CORE | I2C_N_VAL;
 	u32 io_mode = QUP_REPACK_EN;
 
-	blk->is_tx_blk_mode =
-		blk->total_tx_len > qup->out_fifo_sz ? true : false;
-	blk->is_rx_blk_mode =
-		blk->total_rx_len > qup->in_fifo_sz ? true : false;
+	blk->is_tx_blk_mode = blk->total_tx_len > qup->out_fifo_sz;
+	blk->is_rx_blk_mode = blk->total_rx_len > qup->in_fifo_sz;
 
 	if (blk->is_tx_blk_mode) {
 		io_mode |= QUP_OUTPUT_BLK_MODE;
@@ -1528,9 +1526,9 @@ qup_i2c_determine_mode_v2(struct qup_i2c_dev *qup,
 		qup->use_dma = true;
 	} else {
 		qup->blk.is_tx_blk_mode = max_tx_len > qup->out_fifo_sz -
-			QUP_MAX_TAGS_LEN ? true : false;
+			QUP_MAX_TAGS_LEN;
 		qup->blk.is_rx_blk_mode = max_rx_len > qup->in_fifo_sz -
-			READ_RX_TAGS_LEN ? true : false;
+			READ_RX_TAGS_LEN;
 	}
 
 	return 0;
@@ -1660,7 +1658,6 @@ static int qup_i2c_probe(struct platform_device *pdev)
 	static const int blk_sizes[] = {4, 16, 32};
 	struct qup_i2c_dev *qup;
 	unsigned long one_bit_t;
-	struct resource *res;
 	u32 io_mode, hw_ver, size;
 	int ret, fs_div, hs_div;
 	u32 src_clk_freq = DEFAULT_SRC_CLK;
@@ -1757,16 +1754,13 @@ nodma:
 		return -EINVAL;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	qup->base = devm_ioremap_resource(qup->dev, res);
+	qup->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(qup->base))
 		return PTR_ERR(qup->base);
 
 	qup->irq = platform_get_irq(pdev, 0);
-	if (qup->irq < 0) {
-		dev_err(qup->dev, "No IRQ defined\n");
+	if (qup->irq < 0)
 		return qup->irq;
-	}
 
 	if (has_acpi_companion(qup->dev)) {
 		ret = device_property_read_u32(qup->dev,
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 3b5397aa4ca6..a45c4bf1ec01 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -938,9 +938,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->clk);
 	}
 
-	priv->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	priv->io = devm_ioremap_resource(dev, priv->res);
+	priv->io = devm_platform_get_and_ioremap_resource(pdev, 0, &priv->res);
 	if (IS_ERR(priv->io))
 		return PTR_ERR(priv->io);
 
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 73272d4296bb..bc698240c4aa 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -1193,7 +1193,6 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	const struct of_device_id *match;
 	struct rk3x_i2c *i2c;
-	struct resource *mem;
 	int ret = 0;
 	int bus_nr;
 	u32 value;
@@ -1223,8 +1222,7 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 	spin_lock_init(&i2c->lock);
 	init_waitqueue_head(&i2c->wait);
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
+	i2c->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->regs))
 		return PTR_ERR(i2c->regs);
 
@@ -1262,10 +1260,8 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 
 	/* IRQ setup */
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "cannot find rk3x IRQ\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_irq(&pdev->dev, irq, rk3x_i2c_irq,
 			       0, dev_name(&pdev->dev), i2c);
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 57986984a90b..3eafe0eb3e4c 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1266,5 +1266,5 @@ static void __exit i2c_adap_s3c_exit(void)
 module_exit(i2c_adap_s3c_exit);
 
 MODULE_DESCRIPTION("S3C24XX I2C Bus driver");
-MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index d83ca4028fa0..2cca1b21e26e 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -366,7 +366,6 @@ static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
 
 static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
 {
-	unsigned char data;
 	int real_pos;
 
 	/* switch from TX (address) to RX (data) adds two interrupts */
@@ -387,13 +386,11 @@ static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
 		if (real_pos < 0)
 			i2c_op(pd, OP_RX_STOP);
 		else
-			data = i2c_op(pd, OP_RX_STOP_DATA);
+			pd->msg->buf[real_pos] = i2c_op(pd, OP_RX_STOP_DATA);
 	} else if (real_pos >= 0) {
-		data = i2c_op(pd, OP_RX);
+		pd->msg->buf[real_pos] = i2c_op(pd, OP_RX);
 	}
 
-	if (real_pos >= 0)
-		pd->msg->buf[real_pos] = data;
  done:
 	pd->pos++;
 	return pd->pos == (pd->msg->len + 2);
diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c
index a459e00c6851..d7f72ec331e8 100644
--- a/drivers/i2c/busses/i2c-sirf.c
+++ b/drivers/i2c/busses/i2c-sirf.c
@@ -271,7 +271,6 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
 {
 	struct sirfsoc_i2c *siic;
 	struct i2c_adapter *adap;
-	struct resource *mem_res;
 	struct clk *clk;
 	int bitrate;
 	int ctrl_speed;
@@ -309,8 +308,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
 	adap = &siic->adapter;
 	adap->class = I2C_CLASS_DEPRECATED;
 
-	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	siic->base = devm_ioremap_resource(&pdev->dev, mem_res);
+	siic->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(siic->base)) {
 		err = PTR_ERR(siic->base);
 		goto out;
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
index 123a42bfe3b1..19cda6742423 100644
--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -492,10 +492,8 @@ static int sprd_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(i2c_dev->base);
 
 	i2c_dev->irq = platform_get_irq(pdev, 0);
-	if (i2c_dev->irq < 0) {
-		dev_err(&pdev->dev, "failed to get irq resource\n");
+	if (i2c_dev->irq < 0)
 		return i2c_dev->irq;
-	}
 
 	i2c_set_adapdata(&i2c_dev->adap, i2c_dev);
 	init_completion(&i2c_dev->complete);
diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c
index 1da347e6a358..3f69a3bb6119 100644
--- a/drivers/i2c/busses/i2c-stm32.c
+++ b/drivers/i2c/busses/i2c-stm32.c
@@ -25,8 +25,9 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
 	/* Request and configure I2C TX dma channel */
 	dma->chan_tx = dma_request_chan(dev, "tx");
 	if (IS_ERR(dma->chan_tx)) {
-		dev_dbg(dev, "can't request DMA tx channel\n");
 		ret = PTR_ERR(dma->chan_tx);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "can't request DMA tx channel\n");
 		goto fail_al;
 	}
 
@@ -44,8 +45,10 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
 	/* Request and configure I2C RX dma channel */
 	dma->chan_rx = dma_request_chan(dev, "rx");
 	if (IS_ERR(dma->chan_rx)) {
-		dev_err(dev, "can't request DMA rx channel\n");
 		ret = PTR_ERR(dma->chan_rx);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "can't request DMA rx channel\n");
+
 		goto fail_tx;
 	}
 
@@ -73,7 +76,8 @@ fail_tx:
 	dma_release_channel(dma->chan_tx);
 fail_al:
 	devm_kfree(dev, dma);
-	dev_info(dev, "can't use DMA\n");
+	if (ret != -EPROBE_DEFER)
+		dev_info(dev, "can't use DMA\n");
 
 	return ERR_PTR(ret);
 }
diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c
index d6a69dfcac3f..48e269284369 100644
--- a/drivers/i2c/busses/i2c-stm32f4.c
+++ b/drivers/i2c/busses/i2c-stm32f4.c
@@ -797,8 +797,10 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 
 	rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
 	if (IS_ERR(rst)) {
-		dev_err(&pdev->dev, "Error: Missing controller reset\n");
 		ret = PTR_ERR(rst);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Error: Missing reset ctrl\n");
+
 		goto clk_free;
 	}
 	reset_control_assert(rst);
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 330ffed011e0..bff3479fe122 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -189,8 +189,6 @@ struct stm32f7_i2c_regs {
 /**
  * struct stm32f7_i2c_spec - private i2c specification timing
  * @rate: I2C bus speed (Hz)
- * @rate_min: 80% of I2C bus speed (Hz)
- * @rate_max: 100% of I2C bus speed (Hz)
  * @fall_max: Max fall time of both SDA and SCL signals (ns)
  * @rise_max: Max rise time of both SDA and SCL signals (ns)
  * @hddat_min: Min data hold time (ns)
@@ -201,8 +199,6 @@ struct stm32f7_i2c_regs {
  */
 struct stm32f7_i2c_spec {
 	u32 rate;
-	u32 rate_min;
-	u32 rate_max;
 	u32 fall_max;
 	u32 rise_max;
 	u32 hddat_min;
@@ -214,7 +210,6 @@ struct stm32f7_i2c_spec {
 
 /**
  * struct stm32f7_i2c_setup - private I2C timing setup parameters
- * @speed: I2C speed mode (standard, Fast Plus)
  * @speed_freq: I2C speed frequency  (Hz)
  * @clock_src: I2C clock source frequency (Hz)
  * @rise_time: Rise time (ns)
@@ -224,7 +219,6 @@ struct stm32f7_i2c_spec {
  * @fmp_clr_offset: Fast Mode Plus clear register offset from set register
  */
 struct stm32f7_i2c_setup {
-	enum stm32_i2c_speed speed;
 	u32 speed_freq;
 	u32 clock_src;
 	u32 rise_time;
@@ -287,7 +281,7 @@ struct stm32f7_i2c_msg {
  * @base: virtual memory area
  * @complete: completion of I2C message
  * @clk: hw i2c clock
- * @speed: I2C clock frequency of the controller. Standard, Fast or Fast+
+ * @bus_rate: I2C clock frequency of the controller
  * @msg: Pointer to data to be written
  * @msg_num: number of I2C messages to be executed
  * @msg_id: message identifiant
@@ -314,7 +308,7 @@ struct stm32f7_i2c_dev {
 	void __iomem *base;
 	struct completion complete;
 	struct clk *clk;
-	int speed;
+	unsigned int bus_rate;
 	struct i2c_msg *msg;
 	unsigned int msg_num;
 	unsigned int msg_id;
@@ -342,11 +336,9 @@ struct stm32f7_i2c_dev {
  * Table10. Characteristics of the SDA and SCL bus lines for Standard, Fast,
  * and Fast-mode Plus I2C-bus devices
  */
-static struct stm32f7_i2c_spec i2c_specs[] = {
-	[STM32_I2C_SPEED_STANDARD] = {
+static struct stm32f7_i2c_spec stm32f7_i2c_specs[] = {
+	{
 		.rate = I2C_MAX_STANDARD_MODE_FREQ,
-		.rate_min = I2C_MAX_STANDARD_MODE_FREQ * 8 / 10,	/* 80% */
-		.rate_max = I2C_MAX_STANDARD_MODE_FREQ,
 		.fall_max = 300,
 		.rise_max = 1000,
 		.hddat_min = 0,
@@ -355,10 +347,8 @@ static struct stm32f7_i2c_spec i2c_specs[] = {
 		.l_min = 4700,
 		.h_min = 4000,
 	},
-	[STM32_I2C_SPEED_FAST] = {
+	{
 		.rate = I2C_MAX_FAST_MODE_FREQ,
-		.rate_min = I2C_MAX_FAST_MODE_FREQ * 8 / 10,		/* 80% */
-		.rate_max = I2C_MAX_FAST_MODE_FREQ,
 		.fall_max = 300,
 		.rise_max = 300,
 		.hddat_min = 0,
@@ -367,10 +357,8 @@ static struct stm32f7_i2c_spec i2c_specs[] = {
 		.l_min = 1300,
 		.h_min = 600,
 	},
-	[STM32_I2C_SPEED_FAST_PLUS] = {
+	{
 		.rate = I2C_MAX_FAST_MODE_PLUS_FREQ,
-		.rate_min = I2C_MAX_FAST_MODE_PLUS_FREQ * 8 / 10,	/* 80% */
-		.rate_max = I2C_MAX_FAST_MODE_PLUS_FREQ,
 		.fall_max = 100,
 		.rise_max = 120,
 		.hddat_min = 0,
@@ -411,10 +399,23 @@ static void stm32f7_i2c_disable_irq(struct stm32f7_i2c_dev *i2c_dev, u32 mask)
 	stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1, mask);
 }
 
+static struct stm32f7_i2c_spec *stm32f7_get_specs(u32 rate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(stm32f7_i2c_specs); i++)
+		if (rate <= stm32f7_i2c_specs[i].rate)
+			return &stm32f7_i2c_specs[i];
+
+	return ERR_PTR(-EINVAL);
+}
+
+#define	RATE_MIN(rate)	((rate) * 8 / 10)
 static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 				      struct stm32f7_i2c_setup *setup,
 				      struct stm32f7_i2c_timings *output)
 {
+	struct stm32f7_i2c_spec *specs;
 	u32 p_prev = STM32F7_PRESC_MAX;
 	u32 i2cclk = DIV_ROUND_CLOSEST(NSEC_PER_SEC,
 				       setup->clock_src);
@@ -432,18 +433,19 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 	u16 p, l, a, h;
 	int ret = 0;
 
-	if (setup->speed >= STM32_I2C_SPEED_END) {
-		dev_err(i2c_dev->dev, "speed out of bound {%d/%d}\n",
-			setup->speed, STM32_I2C_SPEED_END - 1);
+	specs = stm32f7_get_specs(setup->speed_freq);
+	if (specs == ERR_PTR(-EINVAL)) {
+		dev_err(i2c_dev->dev, "speed out of bound {%d}\n",
+			setup->speed_freq);
 		return -EINVAL;
 	}
 
-	if ((setup->rise_time > i2c_specs[setup->speed].rise_max) ||
-	    (setup->fall_time > i2c_specs[setup->speed].fall_max)) {
+	if ((setup->rise_time > specs->rise_max) ||
+	    (setup->fall_time > specs->fall_max)) {
 		dev_err(i2c_dev->dev,
 			"timings out of bound Rise{%d>%d}/Fall{%d>%d}\n",
-			setup->rise_time, i2c_specs[setup->speed].rise_max,
-			setup->fall_time, i2c_specs[setup->speed].fall_max);
+			setup->rise_time, specs->rise_max,
+			setup->fall_time, specs->fall_max);
 		return -EINVAL;
 	}
 
@@ -454,12 +456,6 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 		return -EINVAL;
 	}
 
-	if (setup->speed_freq > i2c_specs[setup->speed].rate) {
-		dev_err(i2c_dev->dev, "ERROR: Freq {%d/%d}\n",
-			setup->speed_freq, i2c_specs[setup->speed].rate);
-		return -EINVAL;
-	}
-
 	/*  Analog and Digital Filters */
 	af_delay_min =
 		(setup->analog_filter ?
@@ -469,13 +465,13 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 		 STM32F7_I2C_ANALOG_FILTER_DELAY_MAX : 0);
 	dnf_delay = setup->dnf * i2cclk;
 
-	sdadel_min = i2c_specs[setup->speed].hddat_min + setup->fall_time -
+	sdadel_min = specs->hddat_min + setup->fall_time -
 		af_delay_min - (setup->dnf + 3) * i2cclk;
 
-	sdadel_max = i2c_specs[setup->speed].vddat_max - setup->rise_time -
+	sdadel_max = specs->vddat_max - setup->rise_time -
 		af_delay_max - (setup->dnf + 4) * i2cclk;
 
-	scldel_min = setup->rise_time + i2c_specs[setup->speed].sudat_min;
+	scldel_min = setup->rise_time + specs->sudat_min;
 
 	if (sdadel_min < 0)
 		sdadel_min = 0;
@@ -530,8 +526,8 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 
 	tsync = af_delay_min + dnf_delay + (2 * i2cclk);
 	s = NULL;
-	clk_max = NSEC_PER_SEC / i2c_specs[setup->speed].rate_min;
-	clk_min = NSEC_PER_SEC / i2c_specs[setup->speed].rate_max;
+	clk_max = NSEC_PER_SEC / RATE_MIN(setup->speed_freq);
+	clk_min = NSEC_PER_SEC / setup->speed_freq;
 
 	/*
 	 * Among Prescaler possibilities discovered above figures out SCL Low
@@ -549,7 +545,7 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 		for (l = 0; l < STM32F7_SCLL_MAX; l++) {
 			u32 tscl_l = (l + 1) * prescaler + tsync;
 
-			if ((tscl_l < i2c_specs[setup->speed].l_min) ||
+			if ((tscl_l < specs->l_min) ||
 			    (i2cclk >=
 			     ((tscl_l - af_delay_min - dnf_delay) / 4))) {
 				continue;
@@ -561,7 +557,7 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 					setup->rise_time + setup->fall_time;
 
 				if ((tscl >= clk_min) && (tscl <= clk_max) &&
-				    (tscl_h >= i2c_specs[setup->speed].h_min) &&
+				    (tscl_h >= specs->h_min) &&
 				    (i2cclk < tscl_h)) {
 					int clk_error = tscl - i2cbus;
 
@@ -607,6 +603,17 @@ exit:
 	return ret;
 }
 
+static u32 stm32f7_get_lower_rate(u32 rate)
+{
+	int i = ARRAY_SIZE(stm32f7_i2c_specs);
+
+	while (--i)
+		if (stm32f7_i2c_specs[i].rate < rate)
+			break;
+
+	return stm32f7_i2c_specs[i].rate;
+}
+
 static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
 				    struct stm32f7_i2c_setup *setup)
 {
@@ -619,18 +626,15 @@ static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
 
 	i2c_parse_fw_timings(i2c_dev->dev, t, false);
 
-	if (t->bus_freq_hz >= I2C_MAX_FAST_MODE_PLUS_FREQ)
-		i2c_dev->speed = STM32_I2C_SPEED_FAST_PLUS;
-	else if (t->bus_freq_hz >= I2C_MAX_FAST_MODE_FREQ)
-		i2c_dev->speed = STM32_I2C_SPEED_FAST;
-	else
-		i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
+	if (t->bus_freq_hz > I2C_MAX_FAST_MODE_PLUS_FREQ) {
+		dev_err(i2c_dev->dev, "Invalid bus speed (%i>%i)\n",
+			t->bus_freq_hz, I2C_MAX_FAST_MODE_PLUS_FREQ);
+		return -EINVAL;
+	}
 
+	setup->speed_freq = t->bus_freq_hz;
 	i2c_dev->setup.rise_time = t->scl_rise_ns;
 	i2c_dev->setup.fall_time = t->scl_fall_ns;
-
-	setup->speed = i2c_dev->speed;
-	setup->speed_freq = i2c_specs[setup->speed].rate;
 	setup->clock_src = clk_get_rate(i2c_dev->clk);
 
 	if (!setup->clock_src) {
@@ -644,17 +648,13 @@ static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
 		if (ret) {
 			dev_err(i2c_dev->dev,
 				"failed to compute I2C timings.\n");
-			if (i2c_dev->speed > STM32_I2C_SPEED_STANDARD) {
-				i2c_dev->speed--;
-				setup->speed = i2c_dev->speed;
-				setup->speed_freq =
-					i2c_specs[setup->speed].rate;
-				dev_warn(i2c_dev->dev,
-					 "downgrade I2C Speed Freq to (%i)\n",
-					 i2c_specs[setup->speed].rate);
-			} else {
+			if (setup->speed_freq <= I2C_MAX_STANDARD_MODE_FREQ)
 				break;
-			}
+			setup->speed_freq =
+				stm32f7_get_lower_rate(setup->speed_freq);
+			dev_warn(i2c_dev->dev,
+				 "downgrade I2C Speed Freq to (%i)\n",
+				 setup->speed_freq);
 		}
 	} while (ret);
 
@@ -663,13 +663,15 @@ static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
 		return ret;
 	}
 
-	dev_dbg(i2c_dev->dev, "I2C Speed(%i), Freq(%i), Clk Source(%i)\n",
-		setup->speed, setup->speed_freq, setup->clock_src);
+	dev_dbg(i2c_dev->dev, "I2C Speed(%i), Clk Source(%i)\n",
+		setup->speed_freq, setup->clock_src);
 	dev_dbg(i2c_dev->dev, "I2C Rise(%i) and Fall(%i) Time\n",
 		setup->rise_time, setup->fall_time);
 	dev_dbg(i2c_dev->dev, "I2C Analog Filter(%s), DNF(%i)\n",
 		(setup->analog_filter ? "On" : "Off"), setup->dnf);
 
+	i2c_dev->bus_rate = setup->speed_freq;
+
 	return 0;
 }
 
@@ -1462,7 +1464,8 @@ static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
 
 	/* NACK received */
 	if (status & STM32F7_I2C_ISR_NACKF) {
-		dev_dbg(i2c_dev->dev, "<%s>: Receive NACK\n", __func__);
+		dev_dbg(i2c_dev->dev, "<%s>: Receive NACK (addr %x)\n",
+			__func__, f7_msg->addr);
 		writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR);
 		f7_msg->result = -ENXIO;
 	}
@@ -1866,7 +1869,7 @@ static int stm32f7_i2c_write_fm_plus_bits(struct stm32f7_i2c_dev *i2c_dev,
 {
 	int ret;
 
-	if (i2c_dev->speed != STM32_I2C_SPEED_FAST_PLUS ||
+	if (i2c_dev->bus_rate <= I2C_MAX_FAST_MODE_FREQ ||
 	    IS_ERR_OR_NULL(i2c_dev->regmap))
 		/* Optional */
 		return 0;
@@ -1940,8 +1943,7 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	if (!i2c_dev)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c_dev->base = devm_ioremap_resource(&pdev->dev, res);
+	i2c_dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(i2c_dev->base))
 		return PTR_ERR(i2c_dev->base);
 	phy_addr = (dma_addr_t)res->start;
@@ -1967,7 +1969,8 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 
 	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(i2c_dev->clk)) {
-		dev_err(&pdev->dev, "Error: Missing controller clock\n");
+		if (PTR_ERR(i2c_dev->clk) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get controller clock\n");
 		return PTR_ERR(i2c_dev->clk);
 	}
 
@@ -1979,8 +1982,10 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 
 	rst = devm_reset_control_get(&pdev->dev, NULL);
 	if (IS_ERR(rst)) {
-		dev_err(&pdev->dev, "Error: Missing controller reset\n");
 		ret = PTR_ERR(rst);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Error: Missing reset ctrl\n");
+
 		goto clk_free;
 	}
 	reset_control_assert(rst);
@@ -2020,7 +2025,8 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	if (ret)
 		goto clk_free;
 
-	if (i2c_dev->speed == STM32_I2C_SPEED_FAST_PLUS) {
+	/* Setup Fast mode plus if necessary */
+	if (i2c_dev->bus_rate > I2C_MAX_FAST_MODE_FREQ) {
 		ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev);
 		if (ret)
 			goto clk_free;
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index ba6b60caa45e..64d739baf480 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -860,7 +860,6 @@ static int stu300_probe(struct platform_device *pdev)
 {
 	struct stu300_dev *dev;
 	struct i2c_adapter *adap;
-	struct resource *res;
 	int bus_nr;
 	int ret = 0;
 
@@ -876,8 +875,7 @@ static int stu300_probe(struct platform_device *pdev)
 	}
 
 	dev->pdev = pdev;
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dev->virtbase = devm_ioremap_resource(&pdev->dev, res);
+	dev->virtbase = devm_platform_ioremap_resource(pdev, 0);
 	dev_dbg(&pdev->dev, "initialize bus device I2C%d on virtual "
 		"base %p\n", bus_nr, dev->virtbase);
 	if (IS_ERR(dev->virtbase))
diff --git a/drivers/i2c/busses/i2c-sun6i-p2wi.c b/drivers/i2c/busses/i2c-sun6i-p2wi.c
index e5293f0b3318..2f6f6468214d 100644
--- a/drivers/i2c/busses/i2c-sun6i-p2wi.c
+++ b/drivers/i2c/busses/i2c-sun6i-p2wi.c
@@ -187,7 +187,6 @@ static int p2wi_probe(struct platform_device *pdev)
 	struct device_node *childnp;
 	unsigned long parent_clk_freq;
 	u32 clk_freq = I2C_MAX_STANDARD_MODE_FREQ;
-	struct resource *r;
 	struct p2wi *p2wi;
 	u32 slave_addr;
 	int clk_div;
@@ -231,17 +230,14 @@ static int p2wi_probe(struct platform_device *pdev)
 		p2wi->slave_addr = slave_addr;
 	}
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	p2wi->regs = devm_ioremap_resource(dev, r);
+	p2wi->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(p2wi->regs))
 		return PTR_ERR(p2wi->regs);
 
 	strlcpy(p2wi->adapter.name, pdev->name, sizeof(p2wi->adapter.name));
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(dev, "failed to retrieve irq: %d\n", irq);
+	if (irq < 0)
 		return irq;
-	}
 
 	p2wi->clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(p2wi->clk)) {
diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c
index 9099d0a67ace..c9a3dba6a75d 100644
--- a/drivers/i2c/busses/i2c-synquacer.c
+++ b/drivers/i2c/busses/i2c-synquacer.c
@@ -536,7 +536,6 @@ static const struct i2c_adapter synquacer_i2c_ops = {
 static int synquacer_i2c_probe(struct platform_device *pdev)
 {
 	struct synquacer_i2c *i2c;
-	struct resource *r;
 	u32 bus_speed;
 	int ret;
 
@@ -574,16 +573,13 @@ static int synquacer_i2c_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->base = devm_ioremap_resource(&pdev->dev, r);
+	i2c->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->base))
 		return PTR_ERR(i2c->base);
 
 	i2c->irq = platform_get_irq(pdev, 0);
-	if (i2c->irq < 0) {
-		dev_err(&pdev->dev, "no IRQ resource found\n");
+	if (i2c->irq < 0)
 		return -ENODEV;
-	}
 
 	ret = devm_request_irq(&pdev->dev, i2c->irq, synquacer_i2c_isr,
 			       0, dev_name(&pdev->dev), i2c);
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 4c4d17ddc96b..15772964a05f 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -6,6 +6,7 @@
  * Author: Colin Cross <ccross@android.com>
  */
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/dmaengine.h>
@@ -29,16 +30,17 @@
 #define BYTES_PER_FIFO_WORD 4
 
 #define I2C_CNFG				0x000
-#define I2C_CNFG_DEBOUNCE_CNT_SHIFT		12
+#define I2C_CNFG_DEBOUNCE_CNT			GENMASK(14, 12)
 #define I2C_CNFG_PACKET_MODE_EN			BIT(10)
 #define I2C_CNFG_NEW_MASTER_FSM			BIT(11)
 #define I2C_CNFG_MULTI_MASTER_MODE		BIT(17)
-#define I2C_STATUS				0x01C
+#define I2C_STATUS				0x01c
 #define I2C_SL_CNFG				0x020
 #define I2C_SL_CNFG_NACK			BIT(1)
 #define I2C_SL_CNFG_NEWSL			BIT(2)
 #define I2C_SL_ADDR1				0x02c
 #define I2C_SL_ADDR2				0x030
+#define I2C_TLOW_SEXT				0x034
 #define I2C_TX_FIFO				0x050
 #define I2C_RX_FIFO				0x054
 #define I2C_PACKET_TRANSFER_STATUS		0x058
@@ -48,10 +50,8 @@
 #define I2C_FIFO_CONTROL_TX_TRIG(x)		(((x) - 1) << 5)
 #define I2C_FIFO_CONTROL_RX_TRIG(x)		(((x) - 1) << 2)
 #define I2C_FIFO_STATUS				0x060
-#define I2C_FIFO_STATUS_TX_MASK			0xF0
-#define I2C_FIFO_STATUS_TX_SHIFT		4
-#define I2C_FIFO_STATUS_RX_MASK			0x0F
-#define I2C_FIFO_STATUS_RX_SHIFT		0
+#define I2C_FIFO_STATUS_TX			GENMASK(7, 4)
+#define I2C_FIFO_STATUS_RX			GENMASK(3, 0)
 #define I2C_INT_MASK				0x064
 #define I2C_INT_STATUS				0x068
 #define I2C_INT_BUS_CLR_DONE			BIT(11)
@@ -61,7 +61,8 @@
 #define I2C_INT_TX_FIFO_DATA_REQ		BIT(1)
 #define I2C_INT_RX_FIFO_DATA_REQ		BIT(0)
 #define I2C_CLK_DIVISOR				0x06c
-#define I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT	16
+#define I2C_CLK_DIVISOR_STD_FAST_MODE		GENMASK(31, 16)
+#define I2C_CLK_DIVISOR_HSMODE			GENMASK(15, 0)
 
 #define DVC_CTRL_REG1				0x000
 #define DVC_CTRL_REG1_INTR_EN			BIT(10)
@@ -77,10 +78,11 @@
 #define I2C_ERR_UNKNOWN_INTERRUPT		BIT(2)
 #define I2C_ERR_RX_BUFFER_OVERFLOW		BIT(3)
 
-#define PACKET_HEADER0_HEADER_SIZE_SHIFT	28
-#define PACKET_HEADER0_PACKET_ID_SHIFT		16
-#define PACKET_HEADER0_CONT_ID_SHIFT		12
-#define PACKET_HEADER0_PROTOCOL_I2C		BIT(4)
+#define PACKET_HEADER0_HEADER_SIZE		GENMASK(29, 28)
+#define PACKET_HEADER0_PACKET_ID		GENMASK(23, 16)
+#define PACKET_HEADER0_CONT_ID			GENMASK(15, 12)
+#define PACKET_HEADER0_PROTOCOL			GENMASK(7, 4)
+#define PACKET_HEADER0_PROTOCOL_I2C		1
 
 #define I2C_HEADER_CONT_ON_NAK			BIT(21)
 #define I2C_HEADER_READ				BIT(19)
@@ -91,21 +93,35 @@
 #define I2C_HEADER_SLAVE_ADDR_SHIFT		1
 
 #define I2C_BUS_CLEAR_CNFG			0x084
-#define I2C_BC_SCLK_THRESHOLD			9
-#define I2C_BC_SCLK_THRESHOLD_SHIFT		16
+#define I2C_BC_SCLK_THRESHOLD			GENMASK(23, 16)
 #define I2C_BC_STOP_COND			BIT(2)
 #define I2C_BC_TERMINATE			BIT(1)
 #define I2C_BC_ENABLE				BIT(0)
 #define I2C_BUS_CLEAR_STATUS			0x088
 #define I2C_BC_STATUS				BIT(0)
 
-#define I2C_CONFIG_LOAD				0x08C
+#define I2C_CONFIG_LOAD				0x08c
 #define I2C_MSTR_CONFIG_LOAD			BIT(0)
 
 #define I2C_CLKEN_OVERRIDE			0x090
 #define I2C_MST_CORE_CLKEN_OVR			BIT(0)
 
-#define I2C_CONFIG_LOAD_TIMEOUT			1000000
+#define I2C_INTERFACE_TIMING_0			0x094
+#define  I2C_INTERFACE_TIMING_THIGH		GENMASK(13, 8)
+#define  I2C_INTERFACE_TIMING_TLOW		GENMASK(5, 0)
+#define I2C_INTERFACE_TIMING_1			0x098
+#define  I2C_INTERFACE_TIMING_TBUF		GENMASK(29, 24)
+#define  I2C_INTERFACE_TIMING_TSU_STO		GENMASK(21, 16)
+#define  I2C_INTERFACE_TIMING_THD_STA		GENMASK(13, 8)
+#define  I2C_INTERFACE_TIMING_TSU_STA		GENMASK(5, 0)
+
+#define I2C_HS_INTERFACE_TIMING_0		0x09c
+#define  I2C_HS_INTERFACE_TIMING_THIGH		GENMASK(13, 8)
+#define  I2C_HS_INTERFACE_TIMING_TLOW		GENMASK(5, 0)
+#define I2C_HS_INTERFACE_TIMING_1		0x0a0
+#define  I2C_HS_INTERFACE_TIMING_TSU_STO	GENMASK(21, 16)
+#define  I2C_HS_INTERFACE_TIMING_THD_STA	GENMASK(13, 8)
+#define  I2C_HS_INTERFACE_TIMING_TSU_STA	GENMASK(5, 0)
 
 #define I2C_MST_FIFO_CONTROL			0x0b4
 #define I2C_MST_FIFO_CONTROL_RX_FLUSH		BIT(0)
@@ -114,14 +130,11 @@
 #define I2C_MST_FIFO_CONTROL_TX_TRIG(x)		(((x) - 1) << 16)
 
 #define I2C_MST_FIFO_STATUS			0x0b8
-#define I2C_MST_FIFO_STATUS_RX_MASK		0xff
-#define I2C_MST_FIFO_STATUS_RX_SHIFT		0
-#define I2C_MST_FIFO_STATUS_TX_MASK		0xff0000
-#define I2C_MST_FIFO_STATUS_TX_SHIFT		16
+#define I2C_MST_FIFO_STATUS_TX			GENMASK(23, 16)
+#define I2C_MST_FIFO_STATUS_RX			GENMASK(7, 0)
 
-#define I2C_INTERFACE_TIMING_0			0x94
-#define I2C_THIGH_SHIFT				8
-#define I2C_INTERFACE_TIMING_1			0x98
+/* configuration load timeout in microseconds */
+#define I2C_CONFIG_LOAD_TIMEOUT			1000000
 
 /* Packet header size in bytes */
 #define I2C_PACKET_HEADER_SIZE			12
@@ -230,6 +243,7 @@ struct tegra_i2c_hw_feature {
  * @cont_id: I2C controller ID, used for packet header
  * @irq: IRQ number of transfer complete interrupt
  * @is_dvc: identifies the DVC I2C controller, has a different register layout
+ * @is_vi: identifies the VI I2C controller, has a different register layout
  * @msg_complete: transfer completion notifier
  * @msg_err: error code for completed message
  * @msg_buf: pointer to current message data
@@ -253,12 +267,14 @@ struct tegra_i2c_dev {
 	struct i2c_adapter adapter;
 	struct clk *div_clk;
 	struct clk *fast_clk;
+	struct clk *slow_clk;
 	struct reset_control *rst;
 	void __iomem *base;
 	phys_addr_t base_phys;
 	int cont_id;
 	int irq;
 	int is_dvc;
+	bool is_vi;
 	struct completion msg_complete;
 	int msg_err;
 	u8 *msg_buf;
@@ -297,6 +313,8 @@ static unsigned long tegra_i2c_reg_addr(struct tegra_i2c_dev *i2c_dev,
 {
 	if (i2c_dev->is_dvc)
 		reg += (reg >= I2C_TX_FIFO) ? 0x10 : 0x40;
+	else if (i2c_dev->is_vi)
+		reg = 0xc00 + (reg << 2);
 	return reg;
 }
 
@@ -495,12 +513,10 @@ static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
 
 	if (i2c_dev->hw->has_mst_fifo) {
 		val = i2c_readl(i2c_dev, I2C_MST_FIFO_STATUS);
-		rx_fifo_avail = (val & I2C_MST_FIFO_STATUS_RX_MASK) >>
-			I2C_MST_FIFO_STATUS_RX_SHIFT;
+		rx_fifo_avail = FIELD_GET(I2C_MST_FIFO_STATUS_RX, val);
 	} else {
 		val = i2c_readl(i2c_dev, I2C_FIFO_STATUS);
-		rx_fifo_avail = (val & I2C_FIFO_STATUS_RX_MASK) >>
-			I2C_FIFO_STATUS_RX_SHIFT;
+		rx_fifo_avail = FIELD_GET(I2C_FIFO_STATUS_RX, val);
 	}
 
 	/* Rounds down to not include partial word at the end of buf */
@@ -551,12 +567,10 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
 
 	if (i2c_dev->hw->has_mst_fifo) {
 		val = i2c_readl(i2c_dev, I2C_MST_FIFO_STATUS);
-		tx_fifo_avail = (val & I2C_MST_FIFO_STATUS_TX_MASK) >>
-			I2C_MST_FIFO_STATUS_TX_SHIFT;
+		tx_fifo_avail = FIELD_GET(I2C_MST_FIFO_STATUS_TX, val);
 	} else {
 		val = i2c_readl(i2c_dev, I2C_FIFO_STATUS);
-		tx_fifo_avail = (val & I2C_FIFO_STATUS_TX_MASK) >>
-			I2C_FIFO_STATUS_TX_SHIFT;
+		tx_fifo_avail = FIELD_GET(I2C_FIFO_STATUS_TX, val);
 	}
 
 	/* Rounds down to not include partial word at the end of buf */
@@ -650,6 +664,14 @@ static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev)
 		}
 	}
 
+	if (i2c_dev->slow_clk) {
+		ret = clk_enable(i2c_dev->slow_clk);
+		if (ret < 0) {
+			dev_err(dev, "failed to enable slow clock: %d\n", ret);
+			return ret;
+		}
+	}
+
 	ret = clk_enable(i2c_dev->div_clk);
 	if (ret < 0) {
 		dev_err(i2c_dev->dev,
@@ -666,6 +688,10 @@ static int __maybe_unused tegra_i2c_runtime_suspend(struct device *dev)
 	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
 
 	clk_disable(i2c_dev->div_clk);
+
+	if (i2c_dev->slow_clk)
+		clk_disable(i2c_dev->slow_clk);
+
 	if (!i2c_dev->hw->has_single_clk_source)
 		clk_disable(i2c_dev->fast_clk);
 
@@ -703,6 +729,35 @@ static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
 	return 0;
 }
 
+static void tegra_i2c_vi_init(struct tegra_i2c_dev *i2c_dev)
+{
+	u32 value;
+
+	value = FIELD_PREP(I2C_INTERFACE_TIMING_THIGH, 2) |
+		FIELD_PREP(I2C_INTERFACE_TIMING_TLOW, 4);
+	i2c_writel(i2c_dev, value, I2C_INTERFACE_TIMING_0);
+
+	value = FIELD_PREP(I2C_INTERFACE_TIMING_TBUF, 4) |
+		FIELD_PREP(I2C_INTERFACE_TIMING_TSU_STO, 7) |
+		FIELD_PREP(I2C_INTERFACE_TIMING_THD_STA, 4) |
+		FIELD_PREP(I2C_INTERFACE_TIMING_TSU_STA, 4);
+	i2c_writel(i2c_dev, value, I2C_INTERFACE_TIMING_1);
+
+	value = FIELD_PREP(I2C_HS_INTERFACE_TIMING_THIGH, 3) |
+		FIELD_PREP(I2C_HS_INTERFACE_TIMING_TLOW, 8);
+	i2c_writel(i2c_dev, value, I2C_HS_INTERFACE_TIMING_0);
+
+	value = FIELD_PREP(I2C_HS_INTERFACE_TIMING_TSU_STO, 11) |
+		FIELD_PREP(I2C_HS_INTERFACE_TIMING_THD_STA, 11) |
+		FIELD_PREP(I2C_HS_INTERFACE_TIMING_TSU_STA, 11);
+	i2c_writel(i2c_dev, value, I2C_HS_INTERFACE_TIMING_1);
+
+	value = FIELD_PREP(I2C_BC_SCLK_THRESHOLD, 9) | I2C_BC_STOP_COND;
+	i2c_writel(i2c_dev, value, I2C_BUS_CLEAR_CNFG);
+
+	i2c_writel(i2c_dev, 0x0, I2C_TLOW_SEXT);
+}
+
 static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 {
 	u32 val;
@@ -719,7 +774,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 		tegra_dvc_init(i2c_dev);
 
 	val = I2C_CNFG_NEW_MASTER_FSM | I2C_CNFG_PACKET_MODE_EN |
-		(0x2 << I2C_CNFG_DEBOUNCE_CNT_SHIFT);
+	      FIELD_PREP(I2C_CNFG_DEBOUNCE_CNT, 2);
 
 	if (i2c_dev->hw->has_multi_master_mode)
 		val |= I2C_CNFG_MULTI_MASTER_MODE;
@@ -727,10 +782,14 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 	i2c_writel(i2c_dev, val, I2C_CNFG);
 	i2c_writel(i2c_dev, 0, I2C_INT_MASK);
 
+	if (i2c_dev->is_vi)
+		tegra_i2c_vi_init(i2c_dev);
+
 	/* Make sure clock divisor programmed correctly */
-	clk_divisor = i2c_dev->hw->clk_divisor_hs_mode;
-	clk_divisor |= i2c_dev->clk_divisor_non_hs_mode <<
-					I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT;
+	clk_divisor = FIELD_PREP(I2C_CLK_DIVISOR_HSMODE,
+				 i2c_dev->hw->clk_divisor_hs_mode) |
+		      FIELD_PREP(I2C_CLK_DIVISOR_STD_FAST_MODE,
+				 i2c_dev->clk_divisor_non_hs_mode);
 	i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR);
 
 	if (i2c_dev->bus_clk_rate > I2C_MAX_STANDARD_MODE_FREQ &&
@@ -745,7 +804,8 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 	}
 
 	if (i2c_dev->hw->has_interface_timing_reg) {
-		val = (thigh << I2C_THIGH_SHIFT) | tlow;
+		val = FIELD_PREP(I2C_INTERFACE_TIMING_THIGH, thigh) |
+		      FIELD_PREP(I2C_INTERFACE_TIMING_TLOW, tlow);
 		i2c_writel(i2c_dev, val, I2C_INTERFACE_TIMING_0);
 	}
 
@@ -768,7 +828,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 		}
 	}
 
-	if (!i2c_dev->is_dvc) {
+	if (!i2c_dev->is_dvc && !i2c_dev->is_vi) {
 		u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
 
 		sl_cfg |= I2C_SL_CNFG_NACK | I2C_SL_CNFG_NEWSL;
@@ -996,14 +1056,13 @@ tegra_i2c_poll_completion_timeout(struct tegra_i2c_dev *i2c_dev,
 	do {
 		u32 status = i2c_readl(i2c_dev, I2C_INT_STATUS);
 
-		if (status) {
+		if (status)
 			tegra_i2c_isr(i2c_dev->irq, i2c_dev);
 
-			if (completion_done(complete)) {
-				s64 delta = ktime_ms_delta(ktimeout, ktime);
+		if (completion_done(complete)) {
+			s64 delta = ktime_ms_delta(ktimeout, ktime);
 
-				return msecs_to_jiffies(delta) ?: 1;
-			}
+			return msecs_to_jiffies(delta) ?: 1;
 		}
 
 		ktime = ktime_get();
@@ -1030,14 +1089,18 @@ tegra_i2c_wait_completion_timeout(struct tegra_i2c_dev *i2c_dev,
 		disable_irq(i2c_dev->irq);
 
 		/*
-		 * There is a chance that completion may happen after IRQ
-		 * synchronization, which is done by disable_irq().
+		 * Under some rare circumstances (like running KASAN +
+		 * NFS root) CPU, which handles interrupt, may stuck in
+		 * uninterruptible state for a significant time.  In this
+		 * case we will get timeout if I2C transfer is running on
+		 * a sibling CPU, despite of IRQ being raised.
+		 *
+		 * In order to handle this rare condition, the IRQ status
+		 * needs to be checked after timeout.
 		 */
-		if (ret == 0 && completion_done(complete)) {
-			dev_warn(i2c_dev->dev,
-				 "completion done after timeout\n");
-			ret = 1;
-		}
+		if (ret == 0)
+			ret = tegra_i2c_poll_completion_timeout(i2c_dev,
+								complete, 0);
 	}
 
 	return ret;
@@ -1051,8 +1114,8 @@ static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
 	u32 reg;
 
 	reinit_completion(&i2c_dev->msg_complete);
-	reg = (I2C_BC_SCLK_THRESHOLD << I2C_BC_SCLK_THRESHOLD_SHIFT) |
-	      I2C_BC_STOP_COND | I2C_BC_TERMINATE;
+	reg = FIELD_PREP(I2C_BC_SCLK_THRESHOLD, 9) | I2C_BC_STOP_COND |
+	      I2C_BC_TERMINATE;
 	i2c_writel(i2c_dev, reg, I2C_BUS_CLEAR_CNFG);
 	if (i2c_dev->hw->has_config_load_reg) {
 		err = tegra_i2c_wait_for_config_load(i2c_dev);
@@ -1145,10 +1208,11 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		}
 	}
 
-	packet_header = (0 << PACKET_HEADER0_HEADER_SIZE_SHIFT) |
-			PACKET_HEADER0_PROTOCOL_I2C |
-			(i2c_dev->cont_id << PACKET_HEADER0_CONT_ID_SHIFT) |
-			(1 << PACKET_HEADER0_PACKET_ID_SHIFT);
+	packet_header = FIELD_PREP(PACKET_HEADER0_HEADER_SIZE, 0) |
+			FIELD_PREP(PACKET_HEADER0_PROTOCOL,
+				   PACKET_HEADER0_PROTOCOL_I2C) |
+			FIELD_PREP(PACKET_HEADER0_CONT_ID, i2c_dev->cont_id) |
+			FIELD_PREP(PACKET_HEADER0_PACKET_ID, 1);
 	if (dma && !i2c_dev->msg_read)
 		*buffer++ = packet_header;
 	else
@@ -1216,6 +1280,15 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		time_left = tegra_i2c_wait_completion_timeout(
 				i2c_dev, &i2c_dev->dma_complete, xfer_time);
 
+		/*
+		 * Synchronize DMA first, since dmaengine_terminate_sync()
+		 * performs synchronization after the transfer's termination
+		 * and we want to get a completion if transfer succeeded.
+		 */
+		dmaengine_synchronize(i2c_dev->msg_read ?
+				      i2c_dev->rx_dma_chan :
+				      i2c_dev->tx_dma_chan);
+
 		dmaengine_terminate_sync(i2c_dev->msg_read ?
 					 i2c_dev->rx_dma_chan :
 					 i2c_dev->tx_dma_chan);
@@ -1544,6 +1617,7 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
 static const struct of_device_id tegra_i2c_of_match[] = {
 	{ .compatible = "nvidia,tegra194-i2c", .data = &tegra194_i2c_hw, },
 	{ .compatible = "nvidia,tegra186-i2c", .data = &tegra186_i2c_hw, },
+	{ .compatible = "nvidia,tegra210-i2c-vi", .data = &tegra210_i2c_hw, },
 	{ .compatible = "nvidia,tegra210-i2c", .data = &tegra210_i2c_hw, },
 	{ .compatible = "nvidia,tegra124-i2c", .data = &tegra124_i2c_hw, },
 	{ .compatible = "nvidia,tegra114-i2c", .data = &tegra114_i2c_hw, },
@@ -1556,6 +1630,7 @@ MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
 
 static int tegra_i2c_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct tegra_i2c_dev *i2c_dev;
 	struct resource *res;
 	struct clk *div_clk;
@@ -1611,6 +1686,8 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	i2c_dev->hw = of_device_get_match_data(&pdev->dev);
 	i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node,
 						  "nvidia,tegra20-i2c-dvc");
+	i2c_dev->is_vi = of_device_is_compatible(dev->of_node,
+						 "nvidia,tegra210-i2c-vi");
 	i2c_dev->adapter.quirks = i2c_dev->hw->quirks;
 	i2c_dev->dma_buf_size = i2c_dev->adapter.quirks->max_write_len +
 				I2C_PACKET_HEADER_SIZE;
@@ -1626,6 +1703,17 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 		i2c_dev->fast_clk = fast_clk;
 	}
 
+	if (i2c_dev->is_vi) {
+		i2c_dev->slow_clk = devm_clk_get(dev, "slow");
+		if (IS_ERR(i2c_dev->slow_clk)) {
+			if (PTR_ERR(i2c_dev->slow_clk) != -EPROBE_DEFER)
+				dev_err(dev, "failed to get slow clock: %ld\n",
+					PTR_ERR(i2c_dev->slow_clk));
+
+			return PTR_ERR(i2c_dev->slow_clk);
+		}
+	}
+
 	platform_set_drvdata(pdev, i2c_dev);
 
 	if (!i2c_dev->hw->has_single_clk_source) {
@@ -1636,6 +1724,14 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (i2c_dev->slow_clk) {
+		ret = clk_prepare(i2c_dev->slow_clk);
+		if (ret < 0) {
+			dev_err(dev, "failed to prepare slow clock: %d\n", ret);
+			goto unprepare_fast_clk;
+		}
+	}
+
 	if (i2c_dev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ &&
 	    i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_PLUS_FREQ)
 		i2c_dev->clk_divisor_non_hs_mode =
@@ -1651,7 +1747,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	ret = clk_prepare(i2c_dev->div_clk);
 	if (ret < 0) {
 		dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
-		goto unprepare_fast_clk;
+		goto unprepare_slow_clk;
 	}
 
 	pm_runtime_irq_safe(&pdev->dev);
@@ -1694,8 +1790,8 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 
 	irq_set_status_flags(i2c_dev->irq, IRQ_NOAUTOEN);
 
-	ret = devm_request_irq(&pdev->dev, i2c_dev->irq,
-			       tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev);
+	ret = devm_request_irq(&pdev->dev, i2c_dev->irq, tegra_i2c_isr,
+			       IRQF_NO_SUSPEND, dev_name(&pdev->dev), i2c_dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
 		goto release_dma;
@@ -1738,6 +1834,10 @@ disable_rpm:
 unprepare_div_clk:
 	clk_unprepare(i2c_dev->div_clk);
 
+unprepare_slow_clk:
+	if (i2c_dev->is_vi)
+		clk_unprepare(i2c_dev->slow_clk);
+
 unprepare_fast_clk:
 	if (!i2c_dev->hw->has_single_clk_source)
 		clk_unprepare(i2c_dev->fast_clk);
@@ -1759,6 +1859,10 @@ static int tegra_i2c_remove(struct platform_device *pdev)
 		tegra_i2c_runtime_suspend(&pdev->dev);
 
 	clk_unprepare(i2c_dev->div_clk);
+
+	if (i2c_dev->slow_clk)
+		clk_unprepare(i2c_dev->slow_clk);
+
 	if (!i2c_dev->hw->has_single_clk_source)
 		clk_unprepare(i2c_dev->fast_clk);
 
@@ -1769,15 +1873,14 @@ static int tegra_i2c_remove(struct platform_device *pdev)
 static int __maybe_unused tegra_i2c_suspend(struct device *dev)
 {
 	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
-	int err;
+	int err = 0;
 
 	i2c_mark_adapter_suspended(&i2c_dev->adapter);
 
-	err = pm_runtime_force_suspend(dev);
-	if (err < 0)
-		return err;
+	if (!pm_runtime_status_suspended(dev))
+		err = tegra_i2c_runtime_suspend(dev);
 
-	return 0;
+	return err;
 }
 
 static int __maybe_unused tegra_i2c_resume(struct device *dev)
@@ -1785,6 +1888,10 @@ static int __maybe_unused tegra_i2c_resume(struct device *dev)
 	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
 	int err;
 
+	/*
+	 * We need to ensure that clocks are enabled so that registers can be
+	 * restored in tegra_i2c_init().
+	 */
 	err = tegra_i2c_runtime_resume(dev);
 	if (err)
 		return err;
@@ -1793,13 +1900,16 @@ static int __maybe_unused tegra_i2c_resume(struct device *dev)
 	if (err)
 		return err;
 
-	err = tegra_i2c_runtime_suspend(dev);
-	if (err)
-		return err;
-
-	err = pm_runtime_force_resume(dev);
-	if (err < 0)
-		return err;
+	/*
+	 * In case we are runtime suspended, disable clocks again so that we
+	 * don't unbalance the clock reference counts during the next runtime
+	 * resume transition.
+	 */
+	if (pm_runtime_status_suspended(dev)) {
+		err = tegra_i2c_runtime_suspend(dev);
+		if (err)
+			return err;
+	}
 
 	i2c_mark_adapter_resumed(&i2c_dev->adapter);
 
diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
index 2b258d54d68c..cb4666c54a23 100644
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -529,10 +529,8 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->membase);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(dev, "failed to get IRQ number\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
 		bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c
index 668b1fa2b0ef..ee00a44bf4c7 100644
--- a/drivers/i2c/busses/i2c-uniphier.c
+++ b/drivers/i2c/busses/i2c-uniphier.c
@@ -324,10 +324,8 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->membase);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(dev, "failed to get IRQ number\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
 		bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
index 391c878a7cdc..f2241cedf5d3 100644
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -506,23 +506,19 @@ static int xlp9xx_i2c_smbus_setup(struct xlp9xx_i2c_dev *priv,
 static int xlp9xx_i2c_probe(struct platform_device *pdev)
 {
 	struct xlp9xx_i2c_dev *priv;
-	struct resource *res;
 	int err = 0;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);
 
 	priv->irq = platform_get_irq(pdev, 0);
-	if (priv->irq <= 0) {
-		dev_err(&pdev->dev, "invalid irq!\n");
+	if (priv->irq <= 0)
 		return priv->irq;
-	}
 	/* SMBAlert irq */
 	priv->alert_data.irq = platform_get_irq(pdev, 1);
 	if (priv->alert_data.irq <= 0)
diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c
index 282f161a8b08..126d1393e548 100644
--- a/drivers/i2c/busses/i2c-xlr.c
+++ b/drivers/i2c/busses/i2c-xlr.c
@@ -362,7 +362,6 @@ static int xlr_i2c_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *match;
 	struct xlr_i2c_private  *priv;
-	struct resource *res;
 	struct clk *clk;
 	unsigned long clk_rate;
 	unsigned long clk_div;
@@ -380,8 +379,7 @@ static int xlr_i2c_probe(struct platform_device *pdev)
 	else
 		priv->cfg = &xlr_i2c_config_default;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->iobase = devm_ioremap_resource(&pdev->dev, res);
+	priv->iobase = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->iobase))
 		return PTR_ERR(priv->iobase);
 
diff --git a/drivers/i2c/busses/i2c-zx2967.c b/drivers/i2c/busses/i2c-zx2967.c
index 5f3318559b8d..8db9519695a6 100644
--- a/drivers/i2c/busses/i2c-zx2967.c
+++ b/drivers/i2c/busses/i2c-zx2967.c
@@ -502,7 +502,6 @@ static int zx2967_i2c_probe(struct platform_device *pdev)
 {
 	struct zx2967_i2c *i2c;
 	void __iomem *reg_base;
-	struct resource *res;
 	struct clk *clk;
 	int ret;
 
@@ -510,8 +509,7 @@ static int zx2967_i2c_probe(struct platform_device *pdev)
 	if (!i2c)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg_base = devm_ioremap_resource(&pdev->dev, res);
+	reg_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(reg_base))
 		return PTR_ERR(reg_base);
 
diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
index c8f42f2037cb..2ade99b105b9 100644
--- a/drivers/i2c/i2c-core-acpi.c
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -468,16 +468,12 @@ struct notifier_block i2c_acpi_notifier = {
 struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
 				       struct i2c_board_info *info)
 {
+	struct acpi_device *adev = ACPI_COMPANION(dev);
 	struct i2c_acpi_lookup lookup;
 	struct i2c_adapter *adapter;
-	struct acpi_device *adev;
 	LIST_HEAD(resource_list);
 	int ret;
 
-	adev = ACPI_COMPANION(dev);
-	if (!adev)
-		return ERR_PTR(-EINVAL);
-
 	memset(&lookup, 0, sizeof(lookup));
 	lookup.info = info;
 	lookup.device_handle = acpi_device_handle(adev);
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 1f1442dfcad7..d1f278f73011 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -1598,6 +1598,18 @@ void i2c_del_adapter(struct i2c_adapter *adap)
 }
 EXPORT_SYMBOL(i2c_del_adapter);
 
+static void i2c_parse_timing(struct device *dev, char *prop_name, u32 *cur_val_p,
+			    u32 def_val, bool use_def)
+{
+	int ret;
+
+	ret = device_property_read_u32(dev, prop_name, cur_val_p);
+	if (ret && use_def)
+		*cur_val_p = def_val;
+
+	dev_dbg(dev, "%s: %u\n", prop_name, *cur_val_p);
+}
+
 /**
  * i2c_parse_fw_timings - get I2C related timing parameters from firmware
  * @dev: The device to scan for I2C timing properties
@@ -1616,49 +1628,28 @@ EXPORT_SYMBOL(i2c_del_adapter);
  */
 void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_defaults)
 {
-	int ret;
-
-	ret = device_property_read_u32(dev, "clock-frequency", &t->bus_freq_hz);
-	if (ret && use_defaults)
-		t->bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
-
-	ret = device_property_read_u32(dev, "i2c-scl-rising-time-ns", &t->scl_rise_ns);
-	if (ret && use_defaults) {
-		if (t->bus_freq_hz <= I2C_MAX_STANDARD_MODE_FREQ)
-			t->scl_rise_ns = 1000;
-		else if (t->bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ)
-			t->scl_rise_ns = 300;
-		else
-			t->scl_rise_ns = 120;
-	}
-
-	ret = device_property_read_u32(dev, "i2c-scl-falling-time-ns", &t->scl_fall_ns);
-	if (ret && use_defaults) {
-		if (t->bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ)
-			t->scl_fall_ns = 300;
-		else
-			t->scl_fall_ns = 120;
-	}
-
-	ret = device_property_read_u32(dev, "i2c-scl-internal-delay-ns", &t->scl_int_delay_ns);
-	if (ret && use_defaults)
-		t->scl_int_delay_ns = 0;
+	bool u = use_defaults;
+	u32 d;
 
-	ret = device_property_read_u32(dev, "i2c-sda-falling-time-ns", &t->sda_fall_ns);
-	if (ret && use_defaults)
-		t->sda_fall_ns = t->scl_fall_ns;
+	i2c_parse_timing(dev, "clock-frequency", &t->bus_freq_hz,
+			 I2C_MAX_STANDARD_MODE_FREQ, u);
 
-	ret = device_property_read_u32(dev, "i2c-sda-hold-time-ns", &t->sda_hold_ns);
-	if (ret && use_defaults)
-		t->sda_hold_ns = 0;
+	d = t->bus_freq_hz <= I2C_MAX_STANDARD_MODE_FREQ ? 1000 :
+	    t->bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ ? 300 : 120;
+	i2c_parse_timing(dev, "i2c-scl-rising-time-ns", &t->scl_rise_ns, d, u);
 
-	ret = device_property_read_u32(dev, "i2c-digital-filter-width-ns", &t->digital_filter_width_ns);
-	if (ret && use_defaults)
-		t->digital_filter_width_ns = 0;
+	d = t->bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ ? 300 : 120;
+	i2c_parse_timing(dev, "i2c-scl-falling-time-ns", &t->scl_fall_ns, d, u);
 
-	ret = device_property_read_u32(dev, "i2c-analog-filter-cutoff-frequency", &t->analog_filter_cutoff_freq_hz);
-	if (ret && use_defaults)
-		t->analog_filter_cutoff_freq_hz = 0;
+	i2c_parse_timing(dev, "i2c-scl-internal-delay-ns",
+			 &t->scl_int_delay_ns, 0, u);
+	i2c_parse_timing(dev, "i2c-sda-falling-time-ns", &t->sda_fall_ns,
+			 t->scl_fall_ns, u);
+	i2c_parse_timing(dev, "i2c-sda-hold-time-ns", &t->sda_hold_ns, 0, u);
+	i2c_parse_timing(dev, "i2c-digital-filter-width-ns",
+			 &t->digital_filter_width_ns, 0, u);
+	i2c_parse_timing(dev, "i2c-analog-filter-cutoff-frequency",
+			 &t->analog_filter_cutoff_freq_hz, 0, u);
 }
 EXPORT_SYMBOL_GPL(i2c_parse_fw_timings);
 
@@ -2195,7 +2186,6 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
 	const unsigned short *address_list;
 	struct i2c_client *temp_client;
 	int i, err = 0;
-	int adap_id = i2c_adapter_id(adapter);
 
 	address_list = driver->address_list;
 	if (!driver->detect || !address_list)
@@ -2223,7 +2213,7 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
 	for (i = 0; address_list[i] != I2C_CLIENT_END; i += 1) {
 		dev_dbg(&adapter->dev,
 			"found normal entry for adapter %d, addr 0x%02x\n",
-			adap_id, address_list[i]);
+			i2c_adapter_id(adapter), address_list[i]);
 		temp_client->addr = address_list[i];
 		err = i2c_detect_address(temp_client, driver);
 		if (unlikely(err))
diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h
index 517d98be68d2..94ff1693b391 100644
--- a/drivers/i2c/i2c-core.h
+++ b/drivers/i2c/i2c-core.h
@@ -23,9 +23,9 @@ int i2c_dev_irq_from_resources(const struct resource *resources,
 			       unsigned int num_resources);
 
 /*
- * We only allow atomic transfers for very late communication, e.g. to send
- * the powerdown command to a PMIC. Atomic transfers are a corner case and not
- * for generic use!
+ * We only allow atomic transfers for very late communication, e.g. to access a
+ * PMIC when powering down. Atomic transfers are a corner case and not for
+ * generic use!
  */
 static inline bool i2c_in_atomic_xfer_mode(void)
 {
diff --git a/drivers/i2c/i2c-slave-eeprom.c b/drivers/i2c/i2c-slave-eeprom.c
index cb415b10642f..593f2fd39d17 100644
--- a/drivers/i2c/i2c-slave-eeprom.c
+++ b/drivers/i2c/i2c-slave-eeprom.c
@@ -5,10 +5,9 @@
  * Copyright (C) 2014 by Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
  * Copyright (C) 2014 by Renesas Electronics Corporation
  *
- * Because most IP blocks can only detect one I2C slave address anyhow, this
- * driver does not support simulating EEPROM types which take more than one
- * address. It is prepared to simulate bigger EEPROMs with an internal 16 bit
- * pointer, yet implementation is deferred until the need actually arises.
+ * Because most slave IP cores can only detect one I2C slave address anyhow,
+ * this driver does not support simulating EEPROM types which take more than
+ * one address.
  */
 
 /*
@@ -18,6 +17,7 @@
  */
 
 #include <linux/bitfield.h>
+#include <linux/firmware.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/module.h>
@@ -40,7 +40,7 @@ struct eeprom_data {
 #define I2C_SLAVE_BYTELEN GENMASK(15, 0)
 #define I2C_SLAVE_FLAG_ADDR16 BIT(16)
 #define I2C_SLAVE_FLAG_RO BIT(17)
-#define I2C_SLAVE_DEVICE_MAGIC(_len, _flags) ((_flags) | (_len))
+#define I2C_SLAVE_DEVICE_MAGIC(_len, _flags) ((_flags) | ((_len) - 1))
 
 static int i2c_slave_eeprom_slave_cb(struct i2c_client *client,
 				     enum i2c_slave_event event, u8 *val)
@@ -120,24 +120,47 @@ static ssize_t i2c_slave_eeprom_bin_write(struct file *filp, struct kobject *kob
 	return count;
 }
 
+static int i2c_slave_init_eeprom_data(struct eeprom_data *eeprom, struct i2c_client *client,
+				      unsigned int size)
+{
+	const struct firmware *fw;
+	const char *eeprom_data;
+	int ret = device_property_read_string(&client->dev, "firmware-name", &eeprom_data);
+
+	if (!ret) {
+		ret = request_firmware_into_buf(&fw, eeprom_data, &client->dev,
+						eeprom->buffer, size);
+		if (ret)
+			return ret;
+		release_firmware(fw);
+	} else {
+		/* An empty eeprom typically has all bits set to 1 */
+		memset(eeprom->buffer, 0xff, size);
+	}
+	return 0;
+}
+
 static int i2c_slave_eeprom_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	struct eeprom_data *eeprom;
 	int ret;
-	unsigned int size = FIELD_GET(I2C_SLAVE_BYTELEN, id->driver_data);
+	unsigned int size = FIELD_GET(I2C_SLAVE_BYTELEN, id->driver_data) + 1;
 	unsigned int flag_addr16 = FIELD_GET(I2C_SLAVE_FLAG_ADDR16, id->driver_data);
 
 	eeprom = devm_kzalloc(&client->dev, sizeof(struct eeprom_data) + size, GFP_KERNEL);
 	if (!eeprom)
 		return -ENOMEM;
 
-	eeprom->idx_write_cnt = 0;
 	eeprom->num_address_bytes = flag_addr16 ? 2 : 1;
 	eeprom->address_mask = size - 1;
 	eeprom->read_only = FIELD_GET(I2C_SLAVE_FLAG_RO, id->driver_data);
 	spin_lock_init(&eeprom->buffer_lock);
 	i2c_set_clientdata(client, eeprom);
 
+	ret = i2c_slave_init_eeprom_data(eeprom, client, size);
+	if (ret)
+		return ret;
+
 	sysfs_bin_attr_init(&eeprom->bin);
 	eeprom->bin.attr.name = "slave-eeprom";
 	eeprom->bin.attr.mode = S_IRUSR | S_IWUSR;
@@ -175,6 +198,8 @@ static const struct i2c_device_id i2c_slave_eeprom_id[] = {
 	{ "slave-24c32ro", I2C_SLAVE_DEVICE_MAGIC(32768 / 8, I2C_SLAVE_FLAG_ADDR16 | I2C_SLAVE_FLAG_RO) },
 	{ "slave-24c64", I2C_SLAVE_DEVICE_MAGIC(65536 / 8, I2C_SLAVE_FLAG_ADDR16) },
 	{ "slave-24c64ro", I2C_SLAVE_DEVICE_MAGIC(65536 / 8, I2C_SLAVE_FLAG_ADDR16 | I2C_SLAVE_FLAG_RO) },
+	{ "slave-24c512", I2C_SLAVE_DEVICE_MAGIC(524288 / 8, I2C_SLAVE_FLAG_ADDR16) },
+	{ "slave-24c512ro", I2C_SLAVE_DEVICE_MAGIC(524288 / 8, I2C_SLAVE_FLAG_ADDR16 | I2C_SLAVE_FLAG_RO) },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, i2c_slave_eeprom_id);
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index 809bcf8387d0..dc0108287ccf 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -3,10 +3,11 @@
  * i2c-smbus.c - SMBus extensions to the I2C protocol
  *
  * Copyright (C) 2008 David Brownell
- * Copyright (C) 2010 Jean Delvare <jdelvare@suse.de>
+ * Copyright (C) 2010-2019 Jean Delvare <jdelvare@suse.de>
  */
 
 #include <linux/device.h>
+#include <linux/dmi.h>
 #include <linux/i2c.h>
 #include <linux/i2c-smbus.h>
 #include <linux/interrupt.h>
@@ -196,6 +197,107 @@ EXPORT_SYMBOL_GPL(i2c_handle_smbus_alert);
 
 module_i2c_driver(smbalert_driver);
 
+/*
+ * SPD is not part of SMBus but we include it here for convenience as the
+ * target systems are the same.
+ * Restrictions to automatic SPD instantiation:
+ *  - Only works if all filled slots have the same memory type
+ *  - Only works for DDR2, DDR3 and DDR4 for now
+ *  - Only works on systems with 1 to 4 memory slots
+ */
+#if IS_ENABLED(CONFIG_DMI)
+void i2c_register_spd(struct i2c_adapter *adap)
+{
+	int n, slot_count = 0, dimm_count = 0;
+	u16 handle;
+	u8 common_mem_type = 0x0, mem_type;
+	u64 mem_size;
+	const char *name;
+
+	while ((handle = dmi_memdev_handle(slot_count)) != 0xffff) {
+		slot_count++;
+
+		/* Skip empty slots */
+		mem_size = dmi_memdev_size(handle);
+		if (!mem_size)
+			continue;
+
+		/* Skip undefined memory type */
+		mem_type = dmi_memdev_type(handle);
+		if (mem_type <= 0x02)		/* Invalid, Other, Unknown */
+			continue;
+
+		if (!common_mem_type) {
+			/* First filled slot */
+			common_mem_type = mem_type;
+		} else {
+			/* Check that all filled slots have the same type */
+			if (mem_type != common_mem_type) {
+				dev_warn(&adap->dev,
+					 "Different memory types mixed, not instantiating SPD\n");
+				return;
+			}
+		}
+		dimm_count++;
+	}
+
+	/* No useful DMI data, bail out */
+	if (!dimm_count)
+		return;
+
+	dev_info(&adap->dev, "%d/%d memory slots populated (from DMI)\n",
+		 dimm_count, slot_count);
+
+	if (slot_count > 4) {
+		dev_warn(&adap->dev,
+			 "Systems with more than 4 memory slots not supported yet, not instantiating SPD\n");
+		return;
+	}
+
+	switch (common_mem_type) {
+	case 0x13:	/* DDR2 */
+	case 0x18:	/* DDR3 */
+	case 0x1C:	/* LPDDR2 */
+	case 0x1D:	/* LPDDR3 */
+		name = "spd";
+		break;
+	case 0x1A:	/* DDR4 */
+	case 0x1E:	/* LPDDR4 */
+		name = "ee1004";
+		break;
+	default:
+		dev_info(&adap->dev,
+			 "Memory type 0x%02x not supported yet, not instantiating SPD\n",
+			 common_mem_type);
+		return;
+	}
+
+	/*
+	 * We don't know in which slots the memory modules are. We could
+	 * try to guess from the slot names, but that would be rather complex
+	 * and unreliable, so better probe all possible addresses until we
+	 * have found all memory modules.
+	 */
+	for (n = 0; n < slot_count && dimm_count; n++) {
+		struct i2c_board_info info;
+		unsigned short addr_list[2];
+
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strlcpy(info.type, name, I2C_NAME_SIZE);
+		addr_list[0] = 0x50 + n;
+		addr_list[1] = I2C_CLIENT_END;
+
+		if (!IS_ERR(i2c_new_scanned_device(adap, &info, addr_list, NULL))) {
+			dev_info(&adap->dev,
+				 "Successfully instantiated SPD at 0x%hx\n",
+				 addr_list[0]);
+			dimm_count--;
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(i2c_register_spd);
+#endif
+
 MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
 MODULE_DESCRIPTION("SMBus protocol extensions support");
 MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index a0d926ae3f86..4ad665757dd8 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -1,10 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * I2C multiplexer
  *
  * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
  * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
  *
- * This module supports the PCA954x and PCA954x series of I2C multiplexer/switch
+ * This module supports the PCA954x and PCA984x series of I2C multiplexer/switch
  * chips made by NXP Semiconductors.
  * This includes the:
  *	 PCA9540, PCA9542, PCA9543, PCA9544, PCA9545, PCA9546, PCA9547,
@@ -29,10 +30,6 @@
  *	i2c-virtual_cb.c from Brian Kuschak <bkuschak@yahoo.com>
  * and
  *	pca9540.c from Jean Delvare <jdelvare@suse.de>.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/device.h>
@@ -43,10 +40,8 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/of_irq.h>
 #include <linux/pm.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <dt-bindings/mux/mux.h>
@@ -198,7 +193,6 @@ static const struct i2c_device_id pca954x_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, pca954x_id);
 
-#ifdef CONFIG_OF
 static const struct of_device_id pca954x_of_match[] = {
 	{ .compatible = "nxp,pca9540", .data = &chips[pca_9540] },
 	{ .compatible = "nxp,pca9542", .data = &chips[pca_9542] },
@@ -215,7 +209,6 @@ static const struct of_device_id pca954x_of_match[] = {
 	{}
 };
 MODULE_DEVICE_TABLE(of, pca954x_of_match);
-#endif
 
 /* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer()
    for this as they will try to lock adapter a second time */
@@ -327,21 +320,18 @@ static DEVICE_ATTR_RW(idle_state);
 static irqreturn_t pca954x_irq_handler(int irq, void *dev_id)
 {
 	struct pca954x *data = dev_id;
-	unsigned int child_irq;
-	int ret, i, handled = 0;
+	unsigned long pending;
+	int ret, i;
 
 	ret = i2c_smbus_read_byte(data->client);
 	if (ret < 0)
 		return IRQ_NONE;
 
-	for (i = 0; i < data->chip->nchans; i++) {
-		if (ret & BIT(PCA954X_IRQ_OFFSET + i)) {
-			child_irq = irq_linear_revmap(data->irq, i);
-			handle_nested_irq(child_irq);
-			handled++;
-		}
-	}
-	return handled ? IRQ_HANDLED : IRQ_NONE;
+	pending = (ret >> PCA954X_IRQ_OFFSET) & (BIT(data->chip->nchans) - 1);
+	for_each_set_bit(i, &pending, data->chip->nchans)
+		handle_nested_irq(irq_linear_revmap(data->irq, i));
+
+	return IRQ_RETVAL(pending);
 }
 
 static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type)
@@ -390,11 +380,8 @@ static int pca954x_irq_setup(struct i2c_mux_core *muxc)
 static void pca954x_cleanup(struct i2c_mux_core *muxc)
 {
 	struct pca954x *data = i2c_mux_priv(muxc);
-	struct i2c_client *client = data->client;
 	int c, irq;
 
-	device_remove_file(&client->dev, &dev_attr_idle_state);
-
 	if (data->irq) {
 		for (c = 0; c < data->chip->nchans; c++) {
 			irq = irq_find_mapping(data->irq, c);
@@ -429,7 +416,6 @@ static int pca954x_probe(struct i2c_client *client,
 {
 	struct i2c_adapter *adap = client->adapter;
 	struct device *dev = &client->dev;
-	struct device_node *np = dev->of_node;
 	struct gpio_desc *gpio;
 	struct i2c_mux_core *muxc;
 	struct pca954x *data;
@@ -459,7 +445,7 @@ static int pca954x_probe(struct i2c_client *client,
 		udelay(1);
 	}
 
-	data->chip = of_device_get_match_data(dev);
+	data->chip = device_get_match_data(dev);
 	if (!data->chip)
 		data->chip = &chips[id->driver_data];
 
@@ -481,8 +467,8 @@ static int pca954x_probe(struct i2c_client *client,
 	}
 
 	data->idle_state = MUX_IDLE_AS_IS;
-	if (of_property_read_u32(np, "idle-state", &data->idle_state)) {
-		if (np && of_property_read_bool(np, "i2c-mux-idle-disconnect"))
+	if (device_property_read_u32(dev, "idle-state", &data->idle_state)) {
+		if (device_property_read_bool(dev, "i2c-mux-idle-disconnect"))
 			data->idle_state = MUX_IDLE_DISCONNECT;
 	}
 
@@ -539,6 +525,8 @@ static int pca954x_remove(struct i2c_client *client)
 {
 	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
 
+	device_remove_file(&client->dev, &dev_attr_idle_state);
+
 	pca954x_cleanup(muxc);
 	return 0;
 }
@@ -565,7 +553,7 @@ static struct i2c_driver pca954x_driver = {
 	.driver		= {
 		.name	= "pca954x",
 		.pm	= &pca954x_pm,
-		.of_match_table = of_match_ptr(pca954x_of_match),
+		.of_match_table = pca954x_of_match,
 	},
 	.probe		= pca954x_probe,
 	.remove		= pca954x_remove,