Merge branch 'i2c/for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "Here is the I2C pull request for 4.8:

   - the core and i801 driver gained support for SMBus Host Notify

   - core support for more than one address in DT

   - i2c_add_adapter() has now better error messages.  We can remove all
     error messages from drivers calling it as a next step.

   - bigger updates to rk3x driver to support rk3399 SoC

   - the at24 eeprom driver got refactored and can now read special
     variants with unique serials or fixed MAC addresses.

  The rest is regular driver updates and bugfixes"

* 'i2c/for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (66 commits)
  i2c: i801: use IS_ENABLED() instead of checking for built-in or module
  Documentation: i2c: slave: give proper example for pm usage
  Documentation: i2c: slave: describe buffer problems a bit better
  i2c: bcm2835: Don't complain on -EPROBE_DEFER from getting our clock
  i2c: i2c-smbus: drop useless stubs
  i2c: efm32: fix a failure path in efm32_i2c_probe()
  Revert "i2c: core: Cleanup I2C ACPI namespace"
  Revert "i2c: core: Add function for finding the bus speed from ACPI"
  i2c: Update the description of I2C_SMBUS
  i2c: i2c-smbus: fix i2c_handle_smbus_host_notify documentation
  eeprom: at24: tweak the loop_until_timeout() macro
  eeprom: at24: add support for at24mac series
  eeprom: at24: support reading the serial number for 24csxx
  eeprom: at24: platform_data: use BIT() macro
  eeprom: at24: split at24_eeprom_write() into specialized functions
  eeprom: at24: split at24_eeprom_read() into specialized functions
  eeprom: at24: hide the read/write loop behind a macro
  eeprom: at24: call read/write functions via function pointers
  eeprom: at24: coding style fixes
  eeprom: at24: move at24_read() below at24_eeprom_write()
  ...

20 files changed, 976 insertions, 376 deletions

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 78fbee463628..d223650a97e4 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -88,8 +88,8 @@ config I2C_SMBUS
 	tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
 	help
 	  Say Y here if you want support for SMBus extensions to the I2C
-	  specification. At the moment, the only supported extension is
-	  the SMBus alert protocol.
+	  specification. At the moment, two extensions are supported:
+	  the SMBus Alert protocol and the SMBus Host Notify protocol.
 
 	  This support is also available as a module.  If so, the module
 	  will be called i2c-smbus.
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index f167021b8c21..5c3993b26129 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -91,6 +91,7 @@ config I2C_I801
 	tristate "Intel 82801 (ICH/PCH)"
 	depends on PCI
 	select CHECK_SIGNATURE if X86 && DMI
+	select I2C_SMBUS
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  801 family of mainboard I2C interfaces.  Specifically, the following
@@ -397,7 +398,7 @@ config I2C_BCM_KONA
 
 config I2C_BRCMSTB
 	tristate "BRCM Settop I2C controller"
-	depends on ARCH_BRCMSTB || COMPILE_TEST
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
 	default y
 	help
 	  If you say yes to this option, support will be included for the
@@ -490,7 +491,9 @@ config I2C_DESIGNWARE_PCI
 
 config I2C_DESIGNWARE_BAYTRAIL
 	bool "Intel Baytrail I2C semaphore support"
-	depends on I2C_DESIGNWARE_PLATFORM && IOSF_MBI=y && ACPI
+	depends on ACPI
+	depends on (I2C_DESIGNWARE_PLATFORM=m && IOSF_MBI) || \
+		   (I2C_DESIGNWARE_PLATFORM=y && IOSF_MBI=y)
 	help
 	  This driver enables managed host access to the PMIC I2C bus on select
 	  Intel BayTrail platforms using the X-Powers AXP288 PMIC. It allows
@@ -635,7 +638,7 @@ config I2C_LPC2K
 
 config I2C_MESON
 	tristate "Amlogic Meson I2C controller"
-	depends on ARCH_MESON
+	depends on ARCH_MESON || COMPILE_TEST
 	help
 	  If you say yes to this option, support will be included for the
 	  I2C interface on the Amlogic Meson family of SoCs.
@@ -924,7 +927,7 @@ config I2C_UNIPHIER_F
 
 config I2C_VERSATILE
 	tristate "ARM Versatile/Realview I2C bus support"
-	depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS
+	depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS || COMPILE_TEST
 	select I2C_ALGOBIT
 	help
 	  Say yes if you want to support the I2C serial bus on ARMs Versatile
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index 818b051d25e6..d4f3239b5686 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -253,7 +253,8 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
 
 	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(i2c_dev->clk)) {
-		dev_err(&pdev->dev, "Could not get clock\n");
+		if (PTR_ERR(i2c_dev->clk) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Could not get clock\n");
 		return PTR_ERR(i2c_dev->clk);
 	}
 
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index 6a8cfc1344b2..3f5a4d71d3bf 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -343,10 +343,9 @@ static int brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev *dev,
 	struct bsc_regs *pi2creg = dev->bsc_regmap;
 	int no_ack = pmsg->flags & I2C_M_IGNORE_NAK;
 	int data_regsz = brcmstb_i2c_get_data_regsz(dev);
-	int xfersz = brcmstb_i2c_get_xfersz(dev);
 
 	/* see if the transaction needs to check NACK conditions */
-	if (no_ack || len <= xfersz) {
+	if (no_ack) {
 		cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD_NOACK
 			: CMD_WR_NOACK;
 		pi2creg->ctlhi_reg |= BSC_CTLHI_REG_IGNORE_ACK_MASK;
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 99b54be6ba73..c6922b806fb7 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -663,7 +663,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	i2c_dw_xfer_init(dev);
 
 	/* wait for tx to complete */
-	if (!wait_for_completion_timeout(&dev->cmd_complete, HZ)) {
+	if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
 		dev_err(dev->dev, "controller timed out\n");
 		/* i2c_dw_init implicitly disables the adapter */
 		i2c_dw_init(dev);
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index cd409e7fbc71..38493a7142ad 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -26,6 +26,7 @@
 #define DW_IC_CON_MASTER		0x1
 #define DW_IC_CON_SPEED_STD		0x2
 #define DW_IC_CON_SPEED_FAST		0x4
+#define DW_IC_CON_SPEED_MASK		0x6
 #define DW_IC_CON_10BITADDR_MASTER	0x10
 #define DW_IC_CON_RESTART_EN		0x20
 #define DW_IC_CON_SLAVE_DISABLE		0x40
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 7368be000c96..96f8230cd2d3 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -6,7 +6,7 @@
  * Copyright (C) 2006 Texas Instruments.
  * Copyright (C) 2007 MontaVista Software Inc.
  * Copyright (C) 2009 Provigent Ltd.
- * Copyright (C) 2011, 2015 Intel Corporation.
+ * Copyright (C) 2011, 2015, 2016 Intel Corporation.
  *
  * ----------------------------------------------------------------------------
  *
@@ -23,31 +23,27 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/acpi.h>
 #include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
 #include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/pm_runtime.h>
-#include <linux/acpi.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
 #include "i2c-designware-core.h"
 
 #define DRIVER_NAME "i2c-designware-pci"
 
 enum dw_pci_ctl_id_t {
-	medfield_0,
-	medfield_1,
-	medfield_2,
-	medfield_3,
-	medfield_4,
-	medfield_5,
-
+	medfield,
+	merrifield,
 	baytrail,
 	haswell,
 };
@@ -68,6 +64,7 @@ struct dw_pci_controller {
 	u32 clk_khz;
 	u32 functionality;
 	struct dw_scl_sda_cfg *scl_sda_cfg;
+	int (*setup)(struct pci_dev *pdev, struct dw_pci_controller *c);
 };
 
 #define INTEL_MID_STD_CFG  (DW_IC_CON_MASTER |			\
@@ -80,6 +77,14 @@ struct dw_pci_controller {
 					I2C_FUNC_SMBUS_WORD_DATA |	\
 					I2C_FUNC_SMBUS_I2C_BLOCK)
 
+/* Merrifield HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg mrfld_config = {
+	.ss_hcnt = 0x2f8,
+	.fs_hcnt = 0x87,
+	.ss_lcnt = 0x37b,
+	.fs_lcnt = 0x10a,
+};
+
 /* BayTrail HCNT/LCNT/SDA hold time */
 static struct dw_scl_sda_cfg byt_config = {
 	.ss_hcnt = 0x200,
@@ -98,48 +103,60 @@ static struct dw_scl_sda_cfg hsw_config = {
 	.sda_hold = 0x9,
 };
 
+static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
+{
+	switch (pdev->device) {
+	case 0x0817:
+		c->bus_cfg &= ~DW_IC_CON_SPEED_MASK;
+		c->bus_cfg |= DW_IC_CON_SPEED_STD;
+	case 0x0818:
+	case 0x0819:
+		c->bus_num = pdev->device - 0x817 + 3;
+		return 0;
+	case 0x082C:
+	case 0x082D:
+	case 0x082E:
+		c->bus_num = pdev->device - 0x82C + 0;
+		return 0;
+	}
+	return -ENODEV;
+}
+
+static int mrfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
+{
+	/*
+	 * On Intel Merrifield the user visible i2c busses are enumerated
+	 * [1..7]. So, we add 1 to shift the default range. Besides that the
+	 * first PCI slot provides 4 functions, that's why we have to add 0 to
+	 * the first slot and 4 to the next one.
+	 */
+	switch (PCI_SLOT(pdev->devfn)) {
+	case 8:
+		c->bus_num = PCI_FUNC(pdev->devfn) + 0 + 1;
+		return 0;
+	case 9:
+		c->bus_num = PCI_FUNC(pdev->devfn) + 4 + 1;
+		return 0;
+	}
+	return -ENODEV;
+}
+
 static struct dw_pci_controller dw_pci_controllers[] = {
-	[medfield_0] = {
-		.bus_num     = 0,
-		.bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
-		.tx_fifo_depth = 32,
-		.rx_fifo_depth = 32,
-		.clk_khz      = 25000,
-	},
-	[medfield_1] = {
-		.bus_num     = 1,
-		.bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
-		.tx_fifo_depth = 32,
-		.rx_fifo_depth = 32,
-		.clk_khz      = 25000,
-	},
-	[medfield_2] = {
-		.bus_num     = 2,
-		.bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
-		.tx_fifo_depth = 32,
-		.rx_fifo_depth = 32,
-		.clk_khz      = 25000,
-	},
-	[medfield_3] = {
-		.bus_num     = 3,
-		.bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_STD,
-		.tx_fifo_depth = 32,
-		.rx_fifo_depth = 32,
-		.clk_khz      = 25000,
-	},
-	[medfield_4] = {
-		.bus_num     = 4,
+	[medfield] = {
+		.bus_num = -1,
 		.bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
 		.tx_fifo_depth = 32,
 		.rx_fifo_depth = 32,
 		.clk_khz      = 25000,
+		.setup = mfld_setup,
 	},
-	[medfield_5] = {
-		.bus_num     = 5,
-		.bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
-		.tx_fifo_depth = 32,
-		.rx_fifo_depth = 32,
-		.clk_khz      = 25000,
+	[merrifield] = {
+		.bus_num = -1,
+		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+		.tx_fifo_depth = 64,
+		.rx_fifo_depth = 64,
+		.scl_sda_cfg = &mrfld_config,
+		.setup = mrfld_setup,
 	},
 	[baytrail] = {
 		.bus_num = -1,
@@ -190,7 +207,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	struct dw_i2c_dev *dev;
 	struct i2c_adapter *adap;
 	int r;
-	struct  dw_pci_controller *controller;
+	struct dw_pci_controller *controller;
 	struct dw_scl_sda_cfg *cfg;
 
 	if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) {
@@ -224,6 +241,13 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	dev->base = pcim_iomap_table(pdev)[0];
 	dev->dev = &pdev->dev;
 	dev->irq = pdev->irq;
+
+	if (controller->setup) {
+		r = controller->setup(pdev, controller);
+		if (r)
+			return r;
+	}
+
 	dev->functionality = controller->functionality |
 				DW_DEFAULT_FUNCTIONALITY;
 
@@ -276,12 +300,15 @@ MODULE_ALIAS("i2c_designware-pci");
 
 static const struct pci_device_id i2_designware_pci_ids[] = {
 	/* Medfield */
-	{ PCI_VDEVICE(INTEL, 0x0817), medfield_3 },
-	{ PCI_VDEVICE(INTEL, 0x0818), medfield_4 },
-	{ PCI_VDEVICE(INTEL, 0x0819), medfield_5 },
-	{ PCI_VDEVICE(INTEL, 0x082C), medfield_0 },
-	{ PCI_VDEVICE(INTEL, 0x082D), medfield_1 },
-	{ PCI_VDEVICE(INTEL, 0x082E), medfield_2 },
+	{ PCI_VDEVICE(INTEL, 0x0817), medfield },
+	{ PCI_VDEVICE(INTEL, 0x0818), medfield },
+	{ PCI_VDEVICE(INTEL, 0x0819), medfield },
+	{ PCI_VDEVICE(INTEL, 0x082C), medfield },
+	{ PCI_VDEVICE(INTEL, 0x082D), medfield },
+	{ PCI_VDEVICE(INTEL, 0x082E), medfield },
+	/* Merrifield */
+	{ PCI_VDEVICE(INTEL, 0x1195), merrifield },
+	{ PCI_VDEVICE(INTEL, 0x1196), merrifield },
 	/* Baytrail */
 	{ PCI_VDEVICE(INTEL, 0x0F41), baytrail },
 	{ PCI_VDEVICE(INTEL, 0x0F42), baytrail },
diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c
index 8eff62738877..e253598d764c 100644
--- a/drivers/i2c/busses/i2c-efm32.c
+++ b/drivers/i2c/busses/i2c-efm32.c
@@ -433,7 +433,7 @@ static int efm32_i2c_probe(struct platform_device *pdev)
 	ret = request_irq(ddata->irq, efm32_i2c_irq, 0, DRIVER_NAME, ddata);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to request irq (%d)\n", ret);
-		return ret;
+		goto err_disable_clk;
 	}
 
 	ret = i2c_add_adapter(&ddata->adapter);
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 92e8c0ce1625..8af62fb3fe41 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -319,16 +319,6 @@ static struct isa_driver i2c_elektor_driver = {
 	},
 };
 
-static int __init i2c_pcfisa_init(void)
-{
-	return isa_register_driver(&i2c_elektor_driver, 1);
-}
-
-static void __exit i2c_pcfisa_exit(void)
-{
-	isa_unregister_driver(&i2c_elektor_driver);
-}
-
 MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
 MODULE_DESCRIPTION("I2C-Bus adapter routines for PCF8584 ISA bus adapter");
 MODULE_LICENSE("GPL");
@@ -338,6 +328,4 @@ module_param(irq, int, 0);
 module_param(clock, int, 0);
 module_param(own, int, 0);
 module_param(mmapped, int, 0);
-
-module_init(i2c_pcfisa_init);
-module_exit(i2c_pcfisa_exit);
+module_isa_driver(i2c_elektor_driver, 1);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 4a60ad214747..5ef9b733d153 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -72,6 +72,7 @@
  * Block process call transaction	no
  * I2C block read transaction		yes (doesn't use the block buffer)
  * Slave mode				no
+ * SMBus Host Notify			yes
  * Interrupt processing			yes
  *
  * See the file Documentation/i2c/busses/i2c-i801 for details.
@@ -86,6 +87,7 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
 #include <linux/acpi.h>
 #include <linux/io.h>
 #include <linux/dmi.h>
@@ -96,8 +98,7 @@
 #include <linux/platform_data/itco_wdt.h>
 #include <linux/pm_runtime.h>
 
-#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
-		defined CONFIG_DMI
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
 #include <linux/gpio.h>
 #include <linux/i2c-mux-gpio.h>
 #endif
@@ -113,6 +114,10 @@
 #define SMBPEC(p)	(8 + (p)->smba)		/* ICH3 and later */
 #define SMBAUXSTS(p)	(12 + (p)->smba)	/* ICH4 and later */
 #define SMBAUXCTL(p)	(13 + (p)->smba)	/* ICH4 and later */
+#define SMBSLVSTS(p)	(16 + (p)->smba)	/* ICH3 and later */
+#define SMBSLVCMD(p)	(17 + (p)->smba)	/* ICH3 and later */
+#define SMBNTFDADD(p)	(20 + (p)->smba)	/* ICH3 and later */
+#define SMBNTFDDAT(p)	(22 + (p)->smba)	/* ICH3 and later */
 
 /* PCI Address Constants */
 #define SMBBAR		4
@@ -144,6 +149,10 @@
 /* TCO configuration bits for TCOCTL */
 #define TCOCTL_EN		0x0100
 
+/* Auxiliary status register bits, ICH4+ only */
+#define SMBAUXSTS_CRCE		1
+#define SMBAUXSTS_STCO		2
+
 /* Auxiliary control register bits, ICH4+ only */
 #define SMBAUXCTL_CRC		1
 #define SMBAUXCTL_E32B		2
@@ -177,6 +186,12 @@
 #define SMBHSTSTS_INTR		0x02
 #define SMBHSTSTS_HOST_BUSY	0x01
 
+/* Host Notify Status registers bits */
+#define SMBSLVSTS_HST_NTFY_STS	1
+
+/* Host Notify Command registers bits */
+#define SMBSLVCMD_HST_NTFY_INTREN	0x01
+
 #define STATUS_ERROR_FLAGS	(SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \
 				 SMBHSTSTS_DEV_ERR)
 
@@ -239,8 +254,7 @@ struct i801_priv {
 	int len;
 	u8 *data;
 
-#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
-		defined CONFIG_DMI
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
 	const struct i801_mux_config *mux_drvdata;
 	struct platform_device *mux_pdev;
 #endif
@@ -252,13 +266,17 @@ struct i801_priv {
 	 */
 	bool acpi_reserved;
 	struct mutex acpi_lock;
+	struct smbus_host_notify *host_notify;
 };
 
+#define SMBHSTNTFY_SIZE		8
+
 #define FEATURE_SMBUS_PEC	(1 << 0)
 #define FEATURE_BLOCK_BUFFER	(1 << 1)
 #define FEATURE_BLOCK_PROC	(1 << 2)
 #define FEATURE_I2C_BLOCK_READ	(1 << 3)
 #define FEATURE_IRQ		(1 << 4)
+#define FEATURE_HOST_NOTIFY	(1 << 5)
 /* Not really a feature, but it's convenient to handle it as such */
 #define FEATURE_IDF		(1 << 15)
 #define FEATURE_TCO		(1 << 16)
@@ -269,6 +287,7 @@ static const char *i801_feature_names[] = {
 	"Block process call",
 	"I2C block read",
 	"Interrupt",
+	"SMBus Host Notify",
 };
 
 static unsigned int disable_features;
@@ -277,7 +296,8 @@ MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n"
 	"\t\t  0x01  disable SMBus PEC\n"
 	"\t\t  0x02  disable the block buffer\n"
 	"\t\t  0x08  disable the I2C block read functionality\n"
-	"\t\t  0x10  don't use interrupts ");
+	"\t\t  0x10  don't use interrupts\n"
+	"\t\t  0x20  disable SMBus Host Notify ");
 
 /* Make sure the SMBus host is ready to start transmitting.
    Return 0 if it is, -EBUSY if it is not. */
@@ -305,6 +325,29 @@ static int i801_check_pre(struct i801_priv *priv)
 		}
 	}
 
+	/*
+	 * Clear CRC status if needed.
+	 * During normal operation, i801_check_post() takes care
+	 * of it after every operation.  We do it here only in case
+	 * the hardware was already in this state when the driver
+	 * started.
+	 */
+	if (priv->features & FEATURE_SMBUS_PEC) {
+		status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE;
+		if (status) {
+			dev_dbg(&priv->pci_dev->dev,
+				"Clearing aux status flags (%02x)\n", status);
+			outb_p(status, SMBAUXSTS(priv));
+			status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE;
+			if (status) {
+				dev_err(&priv->pci_dev->dev,
+					"Failed clearing aux status flags (%02x)\n",
+					status);
+				return -EBUSY;
+			}
+		}
+	}
+
 	return 0;
 }
 
@@ -348,8 +391,30 @@ static int i801_check_post(struct i801_priv *priv, int status)
 		dev_err(&priv->pci_dev->dev, "Transaction failed\n");
 	}
 	if (status & SMBHSTSTS_DEV_ERR) {
-		result = -ENXIO;
-		dev_dbg(&priv->pci_dev->dev, "No response\n");
+		/*
+		 * This may be a PEC error, check and clear it.
+		 *
+		 * AUXSTS is handled differently from HSTSTS.
+		 * For HSTSTS, i801_isr() or i801_wait_intr()
+		 * has already cleared the error bits in hardware,
+		 * and we are passed a copy of the original value
+		 * in "status".
+		 * For AUXSTS, the hardware register is left
+		 * for us to handle here.
+		 * This is asymmetric, slightly iffy, but safe,
+		 * since all this code is serialized and the CRCE
+		 * bit is harmless as long as it's cleared before
+		 * the next operation.
+		 */
+		if ((priv->features & FEATURE_SMBUS_PEC) &&
+		    (inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE)) {
+			outb_p(SMBAUXSTS_CRCE, SMBAUXSTS(priv));
+			result = -EBADMSG;
+			dev_dbg(&priv->pci_dev->dev, "PEC error\n");
+		} else {
+			result = -ENXIO;
+			dev_dbg(&priv->pci_dev->dev, "No response\n");
+		}
 	}
 	if (status & SMBHSTSTS_BUS_ERR) {
 		result = -EAGAIN;
@@ -511,8 +576,23 @@ static void i801_isr_byte_done(struct i801_priv *priv)
 	outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
 }
 
+static irqreturn_t i801_host_notify_isr(struct i801_priv *priv)
+{
+	unsigned short addr;
+	unsigned int data;
+
+	addr = inb_p(SMBNTFDADD(priv)) >> 1;
+	data = inw_p(SMBNTFDDAT(priv));
+
+	i2c_handle_smbus_host_notify(priv->host_notify, addr, data);
+
+	/* clear Host Notify bit and return */
+	outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
+	return IRQ_HANDLED;
+}
+
 /*
- * There are two kinds of interrupts:
+ * There are three kinds of interrupts:
  *
  * 1) i801 signals transaction completion with one of these interrupts:
  *      INTR - Success
@@ -524,6 +604,8 @@ static void i801_isr_byte_done(struct i801_priv *priv)
  *
  * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt
  *    occurs for each byte of a byte-by-byte to prepare the next byte.
+ *
+ * 3) Host Notify interrupts
  */
 static irqreturn_t i801_isr(int irq, void *dev_id)
 {
@@ -536,6 +618,12 @@ static irqreturn_t i801_isr(int irq, void *dev_id)
 	if (!(pcists & SMBPCISTS_INTS))
 		return IRQ_NONE;
 
+	if (priv->features & FEATURE_HOST_NOTIFY) {
+		status = inb_p(SMBSLVSTS(priv));
+		if (status & SMBSLVSTS_HST_NTFY_STS)
+			return i801_host_notify_isr(priv);
+	}
+
 	status = inb_p(SMBHSTSTS(priv));
 	if (status & SMBHSTSTS_BYTE_DONE)
 		i801_isr_byte_done(priv);
@@ -547,7 +635,7 @@ static irqreturn_t i801_isr(int irq, void *dev_id)
 	status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS;
 	if (status) {
 		outb_p(status, SMBHSTSTS(priv));
-		priv->status |= status;
+		priv->status = status;
 		wake_up(&priv->waitq);
 	}
 
@@ -847,7 +935,28 @@ static u32 i801_func(struct i2c_adapter *adapter)
 	       I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
 	       ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
 	       ((priv->features & FEATURE_I2C_BLOCK_READ) ?
-		I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
+		I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) |
+	       ((priv->features & FEATURE_HOST_NOTIFY) ?
+		I2C_FUNC_SMBUS_HOST_NOTIFY : 0);
+}
+
+static int i801_enable_host_notify(struct i2c_adapter *adapter)
+{
+	struct i801_priv *priv = i2c_get_adapdata(adapter);
+
+	if (!(priv->features & FEATURE_HOST_NOTIFY))
+		return -ENOTSUPP;
+
+	if (!priv->host_notify)
+		priv->host_notify = i2c_setup_smbus_host_notify(adapter);
+	if (!priv->host_notify)
+		return -ENOMEM;
+
+	outb_p(SMBSLVCMD_HST_NTFY_INTREN, SMBSLVCMD(priv));
+	/* clear Host Notify bit to allow a new notification */
+	outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
+
+	return 0;
 }
 
 static const struct i2c_algorithm smbus_algorithm = {
@@ -1022,8 +1131,7 @@ static void __init input_apanel_init(void) {}
 static void i801_probe_optional_slaves(struct i801_priv *priv) {}
 #endif	/* CONFIG_X86 && CONFIG_DMI */
 
-#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
-		defined CONFIG_DMI
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
 static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
 	.gpio_chip = "gpio_ich",
 	.values = { 0x02, 0x03 },
@@ -1379,6 +1487,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		priv->features |= FEATURE_SMBUS_PEC;
 		priv->features |= FEATURE_BLOCK_BUFFER;
 		priv->features |= FEATURE_TCO;
+		priv->features |= FEATURE_HOST_NOTIFY;
 		break;
 
 	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
@@ -1398,6 +1507,8 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		priv->features |= FEATURE_BLOCK_BUFFER;
 		/* fall through */
 	case PCI_DEVICE_ID_INTEL_82801CA_3:
+		priv->features |= FEATURE_HOST_NOTIFY;
+		/* fall through */
 	case PCI_DEVICE_ID_INTEL_82801BA_2:
 	case PCI_DEVICE_ID_INTEL_82801AB_3:
 	case PCI_DEVICE_ID_INTEL_82801AA_3:
@@ -1507,6 +1618,15 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		return err;
 	}
 
+	/*
+	 * Enable Host Notify for chips that supports it.
+	 * It is done after i2c_add_adapter() so that we are sure the work queue
+	 * is not used if i2c_add_adapter() fails.
+	 */
+	err = i801_enable_host_notify(&priv->adapter);
+	if (err && err != -ENOTSUPP)
+		dev_warn(&dev->dev, "Unable to enable SMBus Host Notify\n");
+
 	i801_probe_optional_slaves(priv);
 	/* We ignore errors - multiplexing is optional */
 	i801_add_mux(priv);
@@ -1553,6 +1673,14 @@ static int i801_suspend(struct device *dev)
 
 static int i801_resume(struct device *dev)
 {
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct i801_priv *priv = pci_get_drvdata(pci_dev);
+	int err;
+
+	err = i801_enable_host_notify(&priv->adapter);
+	if (err && err != -ENOTSUPP)
+		dev_warn(dev, "Unable to enable SMBus Host Notify\n");
+
 	return 0;
 }
 #endif
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c
index ba14a863b451..cd9872594fe2 100644
--- a/drivers/i2c/busses/i2c-jz4780.c
+++ b/drivers/i2c/busses/i2c-jz4780.c
@@ -791,10 +791,6 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
 
 	jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0x0);
 
-	i2c->cmd = 0;
-	memset(i2c->cmd_buf, 0, BUFSIZE);
-	memset(i2c->data_buf, 0, BUFSIZE);
-
 	i2c->irq = platform_get_irq(pdev, 0);
 	ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0,
 			       dev_name(&pdev->dev), i2c);
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index e0eb4ca0102e..ba88f17f636c 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -193,23 +193,12 @@ static struct isa_driver pca_isa_driver = {
 	}
 };
 
-static int __init pca_isa_init(void)
-{
-	return isa_register_driver(&pca_isa_driver, 1);
-}
-
-static void __exit pca_isa_exit(void)
-{
-	isa_unregister_driver(&pca_isa_driver);
-}
-
 MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>");
 MODULE_DESCRIPTION("ISA base PCA9564/PCA9665 driver");
 MODULE_LICENSE("GPL");
 
 module_param(base, ulong, 0);
 MODULE_PARM_DESC(base, "I/O base address");
-
 module_param(irq, int, 0);
 MODULE_PARM_DESC(irq, "IRQ");
 module_param(clock, int, 0);
@@ -220,6 +209,4 @@ MODULE_PARM_DESC(clock, "Clock rate in hertz.\n\t\t"
 		"\t\t\t\tFast: 100100 - 400099\n"
 		"\t\t\t\tFast+: 400100 - 10000099\n"
 		"\t\t\t\tTurbo: Up to 1265800");
-
-module_init(pca_isa_init);
-module_exit(pca_isa_exit);
+module_isa_driver(pca_isa_driver, 1);
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 041050edd809..501bd15cb78e 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -213,14 +213,16 @@ static irqreturn_t qup_i2c_interrupt(int irq, void *dev)
 	bus_err &= I2C_STATUS_ERROR_MASK;
 	qup_err &= QUP_STATUS_ERROR_FLAGS;
 
-	if (qup_err) {
-		/* Clear Error interrupt */
+	/* Clear the error bits in QUP_ERROR_FLAGS */
+	if (qup_err)
 		writel(qup_err, qup->base + QUP_ERROR_FLAGS);
-		goto done;
-	}
 
-	if (bus_err) {
-		/* Clear Error interrupt */
+	/* Clear the error bits in QUP_I2C_STATUS */
+	if (bus_err)
+		writel(bus_err, qup->base + QUP_I2C_STATUS);
+
+	/* Reset the QUP State in case of error */
+	if (qup_err || bus_err) {
 		writel(QUP_RESET_STATE, qup->base + QUP_STATE);
 		goto done;
 	}
@@ -310,6 +312,7 @@ static int qup_i2c_wait_ready(struct qup_i2c_dev *qup, int op, bool val,
 	u32 opflags;
 	u32 status;
 	u32 shift = __ffs(op);
+	int ret = 0;
 
 	len *= qup->one_byte_t;
 	/* timeout after a wait of twice the max time */
@@ -321,18 +324,28 @@ static int qup_i2c_wait_ready(struct qup_i2c_dev *qup, int op, bool val,
 
 		if (((opflags & op) >> shift) == val) {
 			if ((op == QUP_OUT_NOT_EMPTY) && qup->is_last) {
-				if (!(status & I2C_STATUS_BUS_ACTIVE))
-					return 0;
+				if (!(status & I2C_STATUS_BUS_ACTIVE)) {
+					ret = 0;
+					goto done;
+				}
 			} else {
-				return 0;
+				ret = 0;
+				goto done;
 			}
 		}
 
-		if (time_after(jiffies, timeout))
-			return -ETIMEDOUT;
-
+		if (time_after(jiffies, timeout)) {
+			ret = -ETIMEDOUT;
+			goto done;
+		}
 		usleep_range(len, len * 2);
 	}
+
+done:
+	if (qup->bus_err || qup->qup_err)
+		ret =  (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
+
+	return ret;
 }
 
 static void qup_i2c_set_write_mode_v2(struct qup_i2c_dev *qup,
@@ -585,8 +598,8 @@ static void qup_i2c_bam_cb(void *data)
 }
 
 static int qup_sg_set_buf(struct scatterlist *sg, void *buf,
-			  struct qup_i2c_tag *tg, unsigned int buflen,
-			  struct qup_i2c_dev *qup, int map, int dir)
+			  unsigned int buflen, struct qup_i2c_dev *qup,
+			  int dir)
 {
 	int ret;
 
@@ -595,9 +608,6 @@ static int qup_sg_set_buf(struct scatterlist *sg, void *buf,
 	if (!ret)
 		return -EINVAL;
 
-	if (!map)
-		sg_dma_address(sg) = tg->addr + ((u8 *)buf - tg->start);
-
 	return 0;
 }
 
@@ -649,37 +659,37 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
 	u8 *tags;
 
 	while (idx < num) {
-		blocks = (msg->len + limit) / limit;
-		rem = msg->len % limit;
 		tx_len = 0, len = 0, i = 0;
 
 		qup->is_last = (idx == (num - 1));
 
 		qup_i2c_set_blk_data(qup, msg);
 
+		blocks = qup->blk.count;
+		rem = msg->len - (blocks - 1) * limit;
+
 		if (msg->flags & I2C_M_RD) {
 			rx_nents += (blocks * 2) + 1;
 			tx_nents += 1;
 
 			while (qup->blk.pos < blocks) {
-				/* length set to '0' implies 256 bytes */
-				tlen = (i == (blocks - 1)) ? rem : 0;
+				tlen = (i == (blocks - 1)) ? rem : limit;
 				tags = &qup->start_tag.start[off + len];
 				len += qup_i2c_set_tags(tags, qup, msg, 1);
+				qup->blk.data_len -= tlen;
 
 				/* scratch buf to read the start and len tags */
 				ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
 						     &qup->brx.tag.start[0],
-						     &qup->brx.tag,
-						     2, qup, 0, 0);
+						     2, qup, DMA_FROM_DEVICE);
 
 				if (ret)
 					return ret;
 
 				ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
 						     &msg->buf[limit * i],
-						     NULL, tlen, qup,
-						     1, DMA_FROM_DEVICE);
+						     tlen, qup,
+						     DMA_FROM_DEVICE);
 				if (ret)
 					return ret;
 
@@ -688,7 +698,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
 			}
 			ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
 					     &qup->start_tag.start[off],
-					     &qup->start_tag, len, qup, 0, 0);
+					     len, qup, DMA_TO_DEVICE);
 			if (ret)
 				return ret;
 
@@ -696,30 +706,28 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
 			/* scratch buf to read the BAM EOT and FLUSH tags */
 			ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
 					     &qup->brx.tag.start[0],
-					     &qup->brx.tag, 2,
-					     qup, 0, 0);
+					     2, qup, DMA_FROM_DEVICE);
 			if (ret)
 				return ret;
 		} else {
 			tx_nents += (blocks * 2);
 
 			while (qup->blk.pos < blocks) {
-				tlen = (i == (blocks - 1)) ? rem : 0;
+				tlen = (i == (blocks - 1)) ? rem : limit;
 				tags = &qup->start_tag.start[off + tx_len];
 				len = qup_i2c_set_tags(tags, qup, msg, 1);
+				qup->blk.data_len -= tlen;
 
 				ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
-						     tags,
-						     &qup->start_tag, len,
-						     qup, 0, 0);
+						     tags, len,
+						     qup, DMA_TO_DEVICE);
 				if (ret)
 					return ret;
 
 				tx_len += len;
 				ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
 						     &msg->buf[limit * i],
-						     NULL, tlen, qup, 1,
-						     DMA_TO_DEVICE);
+						     tlen, qup, DMA_TO_DEVICE);
 				if (ret)
 					return ret;
 				i++;
@@ -738,8 +746,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
 							QUP_BAM_FLUSH_STOP;
 				ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
 						     &qup->btx.tag.start[0],
-						     &qup->btx.tag, len,
-						     qup, 0, 0);
+						     len, qup, DMA_TO_DEVICE);
 				if (ret)
 					return ret;
 				tx_nents += 1;
@@ -801,39 +808,35 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
 	}
 
 	if (ret || qup->bus_err || qup->qup_err) {
-		if (qup->bus_err & QUP_I2C_NACK_FLAG) {
-			msg--;
-			dev_err(qup->dev, "NACK from %x\n", msg->addr);
-			ret = -EIO;
+		if (qup_i2c_change_state(qup, QUP_RUN_STATE)) {
+			dev_err(qup->dev, "change to run state timed out");
+			goto desc_err;
+		}
 
-			if (qup_i2c_change_state(qup, QUP_RUN_STATE)) {
-				dev_err(qup->dev, "change to run state timed out");
-				return ret;
-			}
+		if (rx_nents)
+			writel(QUP_BAM_INPUT_EOT,
+			       qup->base + QUP_OUT_FIFO_BASE);
 
-			if (rx_nents)
-				writel(QUP_BAM_INPUT_EOT,
-				       qup->base + QUP_OUT_FIFO_BASE);
+		writel(QUP_BAM_FLUSH_STOP, qup->base + QUP_OUT_FIFO_BASE);
 
-			writel(QUP_BAM_FLUSH_STOP,
-			       qup->base + QUP_OUT_FIFO_BASE);
+		qup_i2c_flush(qup);
 
-			qup_i2c_flush(qup);
+		/* wait for remaining interrupts to occur */
+		if (!wait_for_completion_timeout(&qup->xfer, HZ))
+			dev_err(qup->dev, "flush timed out\n");
 
-			/* wait for remaining interrupts to occur */
-			if (!wait_for_completion_timeout(&qup->xfer, HZ))
-				dev_err(qup->dev, "flush timed out\n");
+		qup_i2c_rel_dma(qup);
 
-			qup_i2c_rel_dma(qup);
-		}
+		ret =  (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
 	}
 
+desc_err:
 	dma_unmap_sg(qup->dev, qup->btx.sg, tx_nents, DMA_TO_DEVICE);
 
 	if (rx_nents)
 		dma_unmap_sg(qup->dev, qup->brx.sg, rx_nents,
 			     DMA_FROM_DEVICE);
-desc_err:
+
 	return ret;
 }
 
@@ -849,9 +852,6 @@ static int qup_i2c_bam_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
 	if (ret)
 		goto out;
 
-	qup->bus_err = 0;
-	qup->qup_err = 0;
-
 	writel(0, qup->base + QUP_MX_INPUT_CNT);
 	writel(0, qup->base + QUP_MX_OUTPUT_CNT);
 
@@ -889,12 +889,8 @@ static int qup_i2c_wait_for_complete(struct qup_i2c_dev *qup,
 		ret = -ETIMEDOUT;
 	}
 
-	if (qup->bus_err || qup->qup_err) {
-		if (qup->bus_err & QUP_I2C_NACK_FLAG) {
-			dev_err(qup->dev, "NACK from %x\n", msg->addr);
-			ret = -EIO;
-		}
-	}
+	if (qup->bus_err || qup->qup_err)
+		ret =  (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
 
 	return ret;
 }
@@ -1020,7 +1016,7 @@ static void qup_i2c_issue_read(struct qup_i2c_dev *qup, struct i2c_msg *msg)
 {
 	u32 addr, len, val;
 
-	addr = (msg->addr << 1) | 1;
+	addr = i2c_8bit_addr_from_msg(msg);
 
 	/* 0 is used to specify a length 256 (QUP_READ_LIMIT) */
 	len = (msg->len == QUP_READ_LIMIT) ? 0 : msg->len;
@@ -1186,6 +1182,9 @@ static int qup_i2c_xfer(struct i2c_adapter *adap,
 	if (ret < 0)
 		goto out;
 
+	qup->bus_err = 0;
+	qup->qup_err = 0;
+
 	writel(1, qup->base + QUP_SW_RESET);
 	ret = qup_i2c_poll_state(qup, QUP_RESET_STATE);
 	if (ret)
@@ -1235,6 +1234,9 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
 	struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
 	int ret, len, idx = 0, use_dma = 0;
 
+	qup->bus_err = 0;
+	qup->qup_err = 0;
+
 	ret = pm_runtime_get_sync(qup->dev);
 	if (ret < 0)
 		goto out;
@@ -1409,27 +1411,21 @@ static int qup_i2c_probe(struct platform_device *pdev)
 
 		/* 2 tag bytes for each block + 5 for start, stop tags */
 		size = blocks * 2 + 5;
-		qup->dpool = dma_pool_create("qup_i2c-dma-pool", &pdev->dev,
-					     size, 4, 0);
 
-		qup->start_tag.start = dma_pool_alloc(qup->dpool, GFP_KERNEL,
-						      &qup->start_tag.addr);
+		qup->start_tag.start = devm_kzalloc(&pdev->dev,
+						    size, GFP_KERNEL);
 		if (!qup->start_tag.start) {
 			ret = -ENOMEM;
 			goto fail_dma;
 		}
 
-		qup->brx.tag.start = dma_pool_alloc(qup->dpool,
-						    GFP_KERNEL,
-						    &qup->brx.tag.addr);
+		qup->brx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL);
 		if (!qup->brx.tag.start) {
 			ret = -ENOMEM;
 			goto fail_dma;
 		}
 
-		qup->btx.tag.start = dma_pool_alloc(qup->dpool,
-						    GFP_KERNEL,
-						    &qup->btx.tag.addr);
+		qup->btx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL);
 		if (!qup->btx.tag.start) {
 			ret = -ENOMEM;
 			goto fail_dma;
@@ -1568,13 +1564,6 @@ static int qup_i2c_remove(struct platform_device *pdev)
 	struct qup_i2c_dev *qup = platform_get_drvdata(pdev);
 
 	if (qup->is_dma) {
-		dma_pool_free(qup->dpool, qup->start_tag.start,
-			      qup->start_tag.addr);
-		dma_pool_free(qup->dpool, qup->brx.tag.start,
-			      qup->brx.tag.addr);
-		dma_pool_free(qup->dpool, qup->btx.tag.start,
-			      qup->btx.tag.addr);
-		dma_pool_destroy(qup->dpool);
 		dma_release_channel(qup->btx.dma);
 		dma_release_channel(qup->brx.dma);
 	}
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 80bed02cd942..2bc8b01153d6 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -58,6 +58,12 @@ enum {
 #define REG_CON_LASTACK   BIT(5) /* 1: send NACK after last received byte */
 #define REG_CON_ACTACK    BIT(6) /* 1: stop if NACK is received */
 
+#define REG_CON_TUNING_MASK GENMASK(15, 8)
+
+#define REG_CON_SDA_CFG(cfg) ((cfg) << 8)
+#define REG_CON_STA_CFG(cfg) ((cfg) << 12)
+#define REG_CON_STO_CFG(cfg) ((cfg) << 14)
+
 /* REG_MRXADDR bits */
 #define REG_MRXADDR_VALID(x) BIT(24 + (x)) /* [x*8+7:x*8] of MRX[R]ADDR valid */
 
@@ -75,6 +81,77 @@ enum {
 #define WAIT_TIMEOUT      1000 /* ms */
 #define DEFAULT_SCL_RATE  (100 * 1000) /* Hz */
 
+/**
+ * struct i2c_spec_values:
+ * @min_hold_start_ns: min hold time (repeated) START condition
+ * @min_low_ns: min LOW period of the SCL clock
+ * @min_high_ns: min HIGH period of the SCL cloc
+ * @min_setup_start_ns: min set-up time for a repeated START conditio
+ * @max_data_hold_ns: max data hold time
+ * @min_data_setup_ns: min data set-up time
+ * @min_setup_stop_ns: min set-up time for STOP condition
+ * @min_hold_buffer_ns: min bus free time between a STOP and
+ * START condition
+ */
+struct i2c_spec_values {
+	unsigned long min_hold_start_ns;
+	unsigned long min_low_ns;
+	unsigned long min_high_ns;
+	unsigned long min_setup_start_ns;
+	unsigned long max_data_hold_ns;
+	unsigned long min_data_setup_ns;
+	unsigned long min_setup_stop_ns;
+	unsigned long min_hold_buffer_ns;
+};
+
+static const struct i2c_spec_values standard_mode_spec = {
+	.min_hold_start_ns = 4000,
+	.min_low_ns = 4700,
+	.min_high_ns = 4000,
+	.min_setup_start_ns = 4700,
+	.max_data_hold_ns = 3450,
+	.min_data_setup_ns = 250,
+	.min_setup_stop_ns = 4000,
+	.min_hold_buffer_ns = 4700,
+};
+
+static const struct i2c_spec_values fast_mode_spec = {
+	.min_hold_start_ns = 600,
+	.min_low_ns = 1300,
+	.min_high_ns = 600,
+	.min_setup_start_ns = 600,
+	.max_data_hold_ns = 900,
+	.min_data_setup_ns = 100,
+	.min_setup_stop_ns = 600,
+	.min_hold_buffer_ns = 1300,
+};
+
+static const struct i2c_spec_values fast_mode_plus_spec = {
+	.min_hold_start_ns = 260,
+	.min_low_ns = 500,
+	.min_high_ns = 260,
+	.min_setup_start_ns = 260,
+	.max_data_hold_ns = 400,
+	.min_data_setup_ns = 50,
+	.min_setup_stop_ns = 260,
+	.min_hold_buffer_ns = 500,
+};
+
+/**
+ * struct rk3x_i2c_calced_timings:
+ * @div_low: Divider output for low
+ * @div_high: Divider output for high
+ * @tuning: Used to adjust setup/hold data time,
+ * setup/hold start time and setup stop time for
+ * v1's calc_timings, the tuning should all be 0
+ * for old hardware anyone using v0's calc_timings.
+ */
+struct rk3x_i2c_calced_timings {
+	unsigned long div_low;
+	unsigned long div_high;
+	unsigned int tuning;
+};
+
 enum rk3x_i2c_state {
 	STATE_IDLE,
 	STATE_START,
@@ -85,11 +162,35 @@ enum rk3x_i2c_state {
 
 /**
  * @grf_offset: offset inside the grf regmap for setting the i2c type
+ * @calc_timings: Callback function for i2c timing information calculated
  */
 struct rk3x_i2c_soc_data {
 	int grf_offset;
+	int (*calc_timings)(unsigned long, struct i2c_timings *,
+			    struct rk3x_i2c_calced_timings *);
 };
 
+/**
+ * struct rk3x_i2c - private data of the controller
+ * @adap: corresponding I2C adapter
+ * @dev: device for this controller
+ * @soc_data: related soc data struct
+ * @regs: virtual memory area
+ * @clk: function clk for rk3399 or function & Bus clks for others
+ * @pclk: Bus clk for rk3399
+ * @clk_rate_nb: i2c clk rate change notify
+ * @t: I2C known timing information
+ * @lock: spinlock for the i2c bus
+ * @wait: the waitqueue to wait for i2c transfer
+ * @busy: the condition for the event to wait for
+ * @msg: current i2c message
+ * @addr: addr of i2c slave device
+ * @mode: mode of i2c transfer
+ * @is_last_msg: flag determines whether it is the last msg in this transfer
+ * @state: state of i2c transfer
+ * @processed: byte length which has been send or received
+ * @error: error code for i2c transfer
+ */
 struct rk3x_i2c {
 	struct i2c_adapter adap;
 	struct device *dev;
@@ -98,6 +199,7 @@ struct rk3x_i2c {
 	/* Hardware resources */
 	void __iomem *regs;
 	struct clk *clk;
+	struct clk *pclk;
 	struct notifier_block clk_rate_nb;
 
 	/* Settings */
@@ -116,7 +218,7 @@ struct rk3x_i2c {
 
 	/* I2C state machine */
 	enum rk3x_i2c_state state;
-	unsigned int processed; /* sent/received bytes */
+	unsigned int processed;
 	int error;
 };
 
@@ -142,13 +244,12 @@ static inline void rk3x_i2c_clean_ipd(struct rk3x_i2c *i2c)
  */
 static void rk3x_i2c_start(struct rk3x_i2c *i2c)
 {
-	u32 val;
+	u32 val = i2c_readl(i2c, REG_CON) & REG_CON_TUNING_MASK;
 
-	rk3x_i2c_clean_ipd(i2c);
 	i2c_writel(i2c, REG_INT_START, REG_IEN);
 
 	/* enable adapter with correct mode, send START condition */
-	val = REG_CON_EN | REG_CON_MOD(i2c->mode) | REG_CON_START;
+	val |= REG_CON_EN | REG_CON_MOD(i2c->mode) | REG_CON_START;
 
 	/* if we want to react to NACK, set ACTACK bit */
 	if (!(i2c->msg->flags & I2C_M_IGNORE_NAK))
@@ -189,7 +290,8 @@ static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error)
 		 * get the intended effect by resetting its internal state
 		 * and issuing an ordinary START.
 		 */
-		i2c_writel(i2c, 0, REG_CON);
+		ctrl = i2c_readl(i2c, REG_CON) & REG_CON_TUNING_MASK;
+		i2c_writel(i2c, ctrl, REG_CON);
 
 		/* signal that we are finished with the current msg */
 		wake_up(&i2c->wait);
@@ -431,26 +533,37 @@ out:
 }
 
 /**
+ * Get timing values of I2C specification
+ *
+ * @speed: Desired SCL frequency
+ *
+ * Returns: Matched i2c spec values.
+ */
+static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed)
+{
+	if (speed <= 100000)
+		return &standard_mode_spec;
+	else if (speed <= 400000)
+		return &fast_mode_spec;
+	else
+		return &fast_mode_plus_spec;
+}
+
+/**
  * Calculate divider values for desired SCL frequency
  *
  * @clk_rate: I2C input clock rate
- * @t: Known I2C timing information.
- * @div_low: Divider output for low
- * @div_high: Divider output for high
+ * @t: Known I2C timing information
+ * @t_calc: Caculated rk3x private timings that would be written into regs
  *
  * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case
  * a best-effort divider value is returned in divs. If the target rate is
  * too high, we silently use the highest possible rate.
  */
-static int rk3x_i2c_calc_divs(unsigned long clk_rate,
-			      struct i2c_timings *t,
-			      unsigned long *div_low,
-			      unsigned long *div_high)
+static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate,
+				    struct i2c_timings *t,
+				    struct rk3x_i2c_calced_timings *t_calc)
 {
-	unsigned long spec_min_low_ns, spec_min_high_ns;
-	unsigned long spec_setup_start, spec_max_data_hold_ns;
-	unsigned long data_hold_buffer_ns;
-
 	unsigned long min_low_ns, min_high_ns;
 	unsigned long max_low_ns, min_total_ns;
 
@@ -462,6 +575,8 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate,
 	unsigned long min_div_for_hold, min_total_div;
 	unsigned long extra_div, extra_low_div, ideal_low_div;
 
+	unsigned long data_hold_buffer_ns = 50;
+	const struct i2c_spec_values *spec;
 	int ret = 0;
 
 	/* Only support standard-mode and fast-mode */
@@ -484,22 +599,8 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate,
 	 *	 This is because the i2c host on Rockchip holds the data line
 	 *	 for half the low time.
 	 */
-	if (t->bus_freq_hz <= 100000) {
-		/* Standard-mode */
-		spec_min_low_ns = 4700;
-		spec_setup_start = 4700;
-		spec_min_high_ns = 4000;
-		spec_max_data_hold_ns = 3450;
-		data_hold_buffer_ns = 50;
-	} else {
-		/* Fast-mode */
-		spec_min_low_ns = 1300;
-		spec_setup_start = 600;
-		spec_min_high_ns = 600;
-		spec_max_data_hold_ns = 900;
-		data_hold_buffer_ns = 50;
-	}
-	min_high_ns = t->scl_rise_ns + spec_min_high_ns;
+	spec = rk3x_i2c_get_spec(t->bus_freq_hz);
+	min_high_ns = t->scl_rise_ns + spec->min_high_ns;
 
 	/*
 	 * Timings for repeated start:
@@ -509,14 +610,14 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate,
 	 * We need to account for those rules in picking our "high" time so
 	 * we meet tSU;STA and tHD;STA times.
 	 */
-	min_high_ns = max(min_high_ns,
-		DIV_ROUND_UP((t->scl_rise_ns + spec_setup_start) * 1000, 875));
-	min_high_ns = max(min_high_ns,
-		DIV_ROUND_UP((t->scl_rise_ns + spec_setup_start +
-			      t->sda_fall_ns + spec_min_high_ns), 2));
-
-	min_low_ns = t->scl_fall_ns + spec_min_low_ns;
-	max_low_ns = spec_max_data_hold_ns * 2 - data_hold_buffer_ns;
+	min_high_ns = max(min_high_ns, DIV_ROUND_UP(
+		(t->scl_rise_ns + spec->min_setup_start_ns) * 1000, 875));
+	min_high_ns = max(min_high_ns, DIV_ROUND_UP(
+		(t->scl_rise_ns + spec->min_setup_start_ns + t->sda_fall_ns +
+		spec->min_high_ns), 2));
+
+	min_low_ns = t->scl_fall_ns + spec->min_low_ns;
+	max_low_ns =  spec->max_data_hold_ns * 2 - data_hold_buffer_ns;
 	min_total_ns = min_low_ns + min_high_ns;
 
 	/* Adjust to avoid overflow */
@@ -552,8 +653,8 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate,
 		 * Time needed to meet hold requirements is important.
 		 * Just use that.
 		 */
-		*div_low = min_low_div;
-		*div_high = min_high_div;
+		t_calc->div_low = min_low_div;
+		t_calc->div_high = min_high_div;
 	} else {
 		/*
 		 * We've got to distribute some time among the low and high
@@ -582,25 +683,186 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate,
 
 		/* Give low the "ideal" and give high whatever extra is left */
 		extra_low_div = ideal_low_div - min_low_div;
-		*div_low = ideal_low_div;
-		*div_high = min_high_div + (extra_div - extra_low_div);
+		t_calc->div_low = ideal_low_div;
+		t_calc->div_high = min_high_div + (extra_div - extra_low_div);
 	}
 
 	/*
 	 * Adjust to the fact that the hardware has an implicit "+1".
 	 * NOTE: Above calculations always produce div_low > 0 and div_high > 0.
 	 */
-	*div_low = *div_low - 1;
-	*div_high = *div_high - 1;
+	t_calc->div_low--;
+	t_calc->div_high--;
+
+	/* Maximum divider supported by hw is 0xffff */
+	if (t_calc->div_low > 0xffff) {
+		t_calc->div_low = 0xffff;
+		ret = -EINVAL;
+	}
+
+	if (t_calc->div_high > 0xffff) {
+		t_calc->div_high = 0xffff;
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+/**
+ * Calculate timing values for desired SCL frequency
+ *
+ * @clk_rate: I2C input clock rate
+ * @t: Known I2C timing information
+ * @t_calc: Caculated rk3x private timings that would be written into regs
+ *
+ * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case
+ * a best-effort divider value is returned in divs. If the target rate is
+ * too high, we silently use the highest possible rate.
+ * The following formulas are v1's method to calculate timings.
+ *
+ * l = divl + 1;
+ * h = divh + 1;
+ * s = sda_update_config + 1;
+ * u = start_setup_config + 1;
+ * p = stop_setup_config + 1;
+ * T = Tclk_i2c;
+ *
+ * tHigh = 8 * h * T;
+ * tLow = 8 * l * T;
+ *
+ * tHD;sda = (l * s + 1) * T;
+ * tSU;sda = [(8 - s) * l + 1] * T;
+ * tI2C = 8 * (l + h) * T;
+ *
+ * tSU;sta = (8h * u + 1) * T;
+ * tHD;sta = [8h * (u + 1) - 1] * T;
+ * tSU;sto = (8h * p + 1) * T;
+ */
+static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate,
+				    struct i2c_timings *t,
+				    struct rk3x_i2c_calced_timings *t_calc)
+{
+	unsigned long min_low_ns, min_high_ns, min_total_ns;
+	unsigned long min_setup_start_ns, min_setup_data_ns;
+	unsigned long min_setup_stop_ns, max_hold_data_ns;
+
+	unsigned long clk_rate_khz, scl_rate_khz;
+
+	unsigned long min_low_div, min_high_div;
+
+	unsigned long min_div_for_hold, min_total_div;
+	unsigned long extra_div, extra_low_div;
+	unsigned long sda_update_cfg, stp_sta_cfg, stp_sto_cfg;
+
+	const struct i2c_spec_values *spec;
+	int ret = 0;
+
+	/* Support standard-mode, fast-mode and fast-mode plus */
+	if (WARN_ON(t->bus_freq_hz > 1000000))
+		t->bus_freq_hz = 1000000;
+
+	/* prevent scl_rate_khz from becoming 0 */
+	if (WARN_ON(t->bus_freq_hz < 1000))
+		t->bus_freq_hz = 1000;
+
+	/*
+	 * min_low_ns: The minimum number of ns we need to hold low to
+	 *	       meet I2C specification, should include fall time.
+	 * min_high_ns: The minimum number of ns we need to hold high to
+	 *	        meet I2C specification, should include rise time.
+	 */
+	spec = rk3x_i2c_get_spec(t->bus_freq_hz);
+
+	/* calculate min-divh and min-divl */
+	clk_rate_khz = DIV_ROUND_UP(clk_rate, 1000);
+	scl_rate_khz = t->bus_freq_hz / 1000;
+	min_total_div = DIV_ROUND_UP(clk_rate_khz, scl_rate_khz * 8);
+
+	min_high_ns = t->scl_rise_ns + spec->min_high_ns;
+	min_high_div = DIV_ROUND_UP(clk_rate_khz * min_high_ns, 8 * 1000000);
+
+	min_low_ns = t->scl_fall_ns + spec->min_low_ns;
+	min_low_div = DIV_ROUND_UP(clk_rate_khz * min_low_ns, 8 * 1000000);
+
+	/*
+	 * Final divh and divl must be greater than 0, otherwise the
+	 * hardware would not output the i2c clk.
+	 */
+	min_high_div = (min_high_div < 1) ? 2 : min_high_div;
+	min_low_div = (min_low_div < 1) ? 2 : min_low_div;
+
+	/* These are the min dividers needed for min hold times. */
+	min_div_for_hold = (min_low_div + min_high_div);
+	min_total_ns = min_low_ns + min_high_ns;
+
+	/*
+	 * This is the maximum divider so we don't go over the maximum.
+	 * We don't round up here (we round down) since this is a maximum.
+	 */
+	if (min_div_for_hold >= min_total_div) {
+		/*
+		 * Time needed to meet hold requirements is important.
+		 * Just use that.
+		 */
+		t_calc->div_low = min_low_div;
+		t_calc->div_high = min_high_div;
+	} else {
+		/*
+		 * We've got to distribute some time among the low and high
+		 * so we don't run too fast.
+		 * We'll try to split things up by the scale of min_low_div and
+		 * min_high_div, biasing slightly towards having a higher div
+		 * for low (spend more time low).
+		 */
+		extra_div = min_total_div - min_div_for_hold;
+		extra_low_div = DIV_ROUND_UP(min_low_div * extra_div,
+					     min_div_for_hold);
+
+		t_calc->div_low = min_low_div + extra_low_div;
+		t_calc->div_high = min_high_div + (extra_div - extra_low_div);
+	}
+
+	/*
+	 * calculate sda data hold count by the rules, data_upd_st:3
+	 * is a appropriate value to reduce calculated times.
+	 */
+	for (sda_update_cfg = 3; sda_update_cfg > 0; sda_update_cfg--) {
+		max_hold_data_ns =  DIV_ROUND_UP((sda_update_cfg
+						 * (t_calc->div_low) + 1)
+						 * 1000000, clk_rate_khz);
+		min_setup_data_ns =  DIV_ROUND_UP(((8 - sda_update_cfg)
+						 * (t_calc->div_low) + 1)
+						 * 1000000, clk_rate_khz);
+		if ((max_hold_data_ns < spec->max_data_hold_ns) &&
+		    (min_setup_data_ns > spec->min_data_setup_ns))
+			break;
+	}
+
+	/* calculate setup start config */
+	min_setup_start_ns = t->scl_rise_ns + spec->min_setup_start_ns;
+	stp_sta_cfg = DIV_ROUND_UP(clk_rate_khz * min_setup_start_ns
+			   - 1000000, 8 * 1000000 * (t_calc->div_high));
+
+	/* calculate setup stop config */
+	min_setup_stop_ns = t->scl_rise_ns + spec->min_setup_stop_ns;
+	stp_sto_cfg = DIV_ROUND_UP(clk_rate_khz * min_setup_stop_ns
+			   - 1000000, 8 * 1000000 * (t_calc->div_high));
+
+	t_calc->tuning = REG_CON_SDA_CFG(--sda_update_cfg) |
+			 REG_CON_STA_CFG(--stp_sta_cfg) |
+			 REG_CON_STO_CFG(--stp_sto_cfg);
+
+	t_calc->div_low--;
+	t_calc->div_high--;
 
 	/* Maximum divider supported by hw is 0xffff */
-	if (*div_low > 0xffff) {
-		*div_low = 0xffff;
+	if (t_calc->div_low > 0xffff) {
+		t_calc->div_low = 0xffff;
 		ret = -EINVAL;
 	}
 
-	if (*div_high > 0xffff) {
-		*div_high = 0xffff;
+	if (t_calc->div_high > 0xffff) {
+		t_calc->div_high = 0xffff;
 		ret = -EINVAL;
 	}
 
@@ -610,19 +872,31 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate,
 static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate)
 {
 	struct i2c_timings *t = &i2c->t;
-	unsigned long div_low, div_high;
+	struct rk3x_i2c_calced_timings calc;
 	u64 t_low_ns, t_high_ns;
+	unsigned long flags;
+	u32 val;
 	int ret;
 
-	ret = rk3x_i2c_calc_divs(clk_rate, t, &div_low, &div_high);
+	ret = i2c->soc_data->calc_timings(clk_rate, t, &calc);
 	WARN_ONCE(ret != 0, "Could not reach SCL freq %u", t->bus_freq_hz);
 
-	clk_enable(i2c->clk);
-	i2c_writel(i2c, (div_high << 16) | (div_low & 0xffff), REG_CLKDIV);
-	clk_disable(i2c->clk);
+	clk_enable(i2c->pclk);
+
+	spin_lock_irqsave(&i2c->lock, flags);
+	val = i2c_readl(i2c, REG_CON);
+	val &= ~REG_CON_TUNING_MASK;
+	val |= calc.tuning;
+	i2c_writel(i2c, val, REG_CON);
+	i2c_writel(i2c, (calc.div_high << 16) | (calc.div_low & 0xffff),
+		   REG_CLKDIV);
+	spin_unlock_irqrestore(&i2c->lock, flags);
+
+	clk_disable(i2c->pclk);
 
-	t_low_ns = div_u64(((u64)div_low + 1) * 8 * 1000000000, clk_rate);
-	t_high_ns = div_u64(((u64)div_high + 1) * 8 * 1000000000, clk_rate);
+	t_low_ns = div_u64(((u64)calc.div_low + 1) * 8 * 1000000000, clk_rate);
+	t_high_ns = div_u64(((u64)calc.div_high + 1) * 8 * 1000000000,
+			    clk_rate);
 	dev_dbg(i2c->dev,
 		"CLK %lukhz, Req %uns, Act low %lluns high %lluns\n",
 		clk_rate / 1000,
@@ -652,12 +926,17 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
 {
 	struct clk_notifier_data *ndata = data;
 	struct rk3x_i2c *i2c = container_of(nb, struct rk3x_i2c, clk_rate_nb);
-	unsigned long div_low, div_high;
+	struct rk3x_i2c_calced_timings calc;
 
 	switch (event) {
 	case PRE_RATE_CHANGE:
-		if (rk3x_i2c_calc_divs(ndata->new_rate, &i2c->t,
-				       &div_low, &div_high) != 0)
+		/*
+		 * Try the calculation (but don't store the result) ahead of
+		 * time to see if we need to block the clock change.  Timings
+		 * shouldn't actually take effect until rk3x_i2c_adapt_div().
+		 */
+		if (i2c->soc_data->calc_timings(ndata->new_rate, &i2c->t,
+						&calc) != 0)
 			return NOTIFY_STOP;
 
 		/* scale up */
@@ -767,12 +1046,14 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap,
 {
 	struct rk3x_i2c *i2c = (struct rk3x_i2c *)adap->algo_data;
 	unsigned long timeout, flags;
+	u32 val;
 	int ret = 0;
 	int i;
 
 	spin_lock_irqsave(&i2c->lock, flags);
 
 	clk_enable(i2c->clk);
+	clk_enable(i2c->pclk);
 
 	i2c->is_last_msg = false;
 
@@ -806,7 +1087,9 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap,
 
 			/* Force a STOP condition without interrupt */
 			i2c_writel(i2c, 0, REG_IEN);
-			i2c_writel(i2c, REG_CON_EN | REG_CON_STOP, REG_CON);
+			val = i2c_readl(i2c, REG_CON) & REG_CON_TUNING_MASK;
+			val |= REG_CON_EN | REG_CON_STOP;
+			i2c_writel(i2c, val, REG_CON);
 
 			i2c->state = STATE_IDLE;
 
@@ -820,7 +1103,9 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap,
 		}
 	}
 
+	clk_disable(i2c->pclk);
 	clk_disable(i2c->clk);
+
 	spin_unlock_irqrestore(&i2c->lock, flags);
 
 	return ret < 0 ? ret : num;
@@ -836,17 +1121,52 @@ static const struct i2c_algorithm rk3x_i2c_algorithm = {
 	.functionality		= rk3x_i2c_func,
 };
 
-static struct rk3x_i2c_soc_data soc_data[3] = {
-	{ .grf_offset = 0x154 }, /* rk3066 */
-	{ .grf_offset = 0x0a4 }, /* rk3188 */
-	{ .grf_offset = -1 },    /* no I2C switching needed */
+static const struct rk3x_i2c_soc_data rk3066_soc_data = {
+	.grf_offset = 0x154,
+	.calc_timings = rk3x_i2c_v0_calc_timings,
+};
+
+static const struct rk3x_i2c_soc_data rk3188_soc_data = {
+	.grf_offset = 0x0a4,
+	.calc_timings = rk3x_i2c_v0_calc_timings,
+};
+
+static const struct rk3x_i2c_soc_data rk3228_soc_data = {
+	.grf_offset = -1,
+	.calc_timings = rk3x_i2c_v0_calc_timings,
+};
+
+static const struct rk3x_i2c_soc_data rk3288_soc_data = {
+	.grf_offset = -1,
+	.calc_timings = rk3x_i2c_v0_calc_timings,
+};
+
+static const struct rk3x_i2c_soc_data rk3399_soc_data = {
+	.grf_offset = -1,
+	.calc_timings = rk3x_i2c_v1_calc_timings,
 };
 
 static const struct of_device_id rk3x_i2c_match[] = {
-	{ .compatible = "rockchip,rk3066-i2c", .data = (void *)&soc_data[0] },
-	{ .compatible = "rockchip,rk3188-i2c", .data = (void *)&soc_data[1] },
-	{ .compatible = "rockchip,rk3228-i2c", .data = (void *)&soc_data[2] },
-	{ .compatible = "rockchip,rk3288-i2c", .data = (void *)&soc_data[2] },
+	{
+		.compatible = "rockchip,rk3066-i2c",
+		.data = (void *)&rk3066_soc_data
+	},
+	{
+		.compatible = "rockchip,rk3188-i2c",
+		.data = (void *)&rk3188_soc_data
+	},
+	{
+		.compatible = "rockchip,rk3228-i2c",
+		.data = (void *)&rk3228_soc_data
+	},
+	{
+		.compatible = "rockchip,rk3288-i2c",
+		.data = (void *)&rk3288_soc_data
+	},
+	{
+		.compatible = "rockchip,rk3399-i2c",
+		.data = (void *)&rk3399_soc_data
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, rk3x_i2c_match);
@@ -886,12 +1206,6 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 	spin_lock_init(&i2c->lock);
 	init_waitqueue_head(&i2c->wait);
 
-	i2c->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(i2c->clk)) {
-		dev_err(&pdev->dev, "cannot get clock\n");
-		return PTR_ERR(i2c->clk);
-	}
-
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
 	if (IS_ERR(i2c->regs))
@@ -945,17 +1259,44 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, i2c);
 
+	if (i2c->soc_data->calc_timings == rk3x_i2c_v0_calc_timings) {
+		/* Only one clock to use for bus clock and peripheral clock */
+		i2c->clk = devm_clk_get(&pdev->dev, NULL);
+		i2c->pclk = i2c->clk;
+	} else {
+		i2c->clk = devm_clk_get(&pdev->dev, "i2c");
+		i2c->pclk = devm_clk_get(&pdev->dev, "pclk");
+	}
+
+	if (IS_ERR(i2c->clk)) {
+		ret = PTR_ERR(i2c->clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Can't get bus clk: %d\n", ret);
+		return ret;
+	}
+	if (IS_ERR(i2c->pclk)) {
+		ret = PTR_ERR(i2c->pclk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Can't get periph clk: %d\n", ret);
+		return ret;
+	}
+
 	ret = clk_prepare(i2c->clk);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "Could not prepare clock\n");
+		dev_err(&pdev->dev, "Can't prepare bus clk: %d\n", ret);
 		return ret;
 	}
+	ret = clk_prepare(i2c->pclk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Can't prepare periph clock: %d\n", ret);
+		goto err_clk;
+	}
 
 	i2c->clk_rate_nb.notifier_call = rk3x_i2c_clk_notifier_cb;
 	ret = clk_notifier_register(i2c->clk, &i2c->clk_rate_nb);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Unable to register clock notifier\n");
-		goto err_clk;
+		goto err_pclk;
 	}
 
 	clk_rate = clk_get_rate(i2c->clk);
@@ -973,6 +1314,8 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 
 err_clk_notifier:
 	clk_notifier_unregister(i2c->clk, &i2c->clk_rate_nb);
+err_pclk:
+	clk_unprepare(i2c->pclk);
 err_clk:
 	clk_unprepare(i2c->clk);
 	return ret;
@@ -985,6 +1328,7 @@ static int rk3x_i2c_remove(struct platform_device *pdev)
 	i2c_del_adapter(&i2c->adap);
 
 	clk_notifier_unregister(i2c->clk, &i2c->clk_rate_nb);
+	clk_unprepare(i2c->pclk);
 	clk_unprepare(i2c->clk);
 
 	return 0;
diff --git a/drivers/i2c/busses/i2c-robotfuzz-osif.c b/drivers/i2c/busses/i2c-robotfuzz-osif.c
index ced9c6a308d1..89d8b41b6668 100644
--- a/drivers/i2c/busses/i2c-robotfuzz-osif.c
+++ b/drivers/i2c/busses/i2c-robotfuzz-osif.c
@@ -125,7 +125,7 @@ static struct i2c_algorithm osif_algorithm = {
 #define USB_OSIF_VENDOR_ID	0x1964
 #define USB_OSIF_PRODUCT_ID	0x0001
 
-static struct usb_device_id osif_table[] = {
+static const struct usb_device_id osif_table[] = {
 	{ USB_DEVICE(USB_OSIF_VENDOR_ID, USB_OSIF_PRODUCT_ID) },
 	{ }
 };
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
index 240637f01d11..c73d2d22009e 100644
--- a/drivers/i2c/busses/i2c-versatile.c
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -70,28 +70,14 @@ static int i2c_versatile_probe(struct platform_device *dev)
 	struct resource *r;
 	int ret;
 
+	i2c = devm_kzalloc(&dev->dev, sizeof(struct i2c_versatile), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
 	r = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (!r) {
-		ret = -EINVAL;
-		goto err_out;
-	}
-
-	if (!request_mem_region(r->start, resource_size(r), "versatile-i2c")) {
-		ret = -EBUSY;
-		goto err_out;
-	}
-
-	i2c = kzalloc(sizeof(struct i2c_versatile), GFP_KERNEL);
-	if (!i2c) {
-		ret = -ENOMEM;
-		goto err_release;
-	}
-
-	i2c->base = ioremap(r->start, resource_size(r));
-	if (!i2c->base) {
-		ret = -ENOMEM;
-		goto err_free;
-	}
+	i2c->base = devm_ioremap_resource(&dev->dev, r);
+	if (IS_ERR(i2c->base))
+		return PTR_ERR(i2c->base);
 
 	writel(SCL | SDA, i2c->base + I2C_CONTROLS);
 
@@ -105,18 +91,12 @@ static int i2c_versatile_probe(struct platform_device *dev)
 
 	i2c->adap.nr = dev->id;
 	ret = i2c_bit_add_numbered_bus(&i2c->adap);
-	if (ret >= 0) {
-		platform_set_drvdata(dev, i2c);
-		return 0;
-	}
-
-	iounmap(i2c->base);
- err_free:
-	kfree(i2c);
- err_release:
-	release_mem_region(r->start, resource_size(r));
- err_out:
-	return ret;
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(dev, i2c);
+
+	return 0;
 }
 
 static int i2c_versatile_remove(struct platform_device *dev)
diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
index c941418f06f5..55a7bef1b2e1 100644
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -6,6 +6,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/acpi.h>
 #include <linux/completion.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
@@ -341,11 +342,10 @@ static struct i2c_algorithm xlp9xx_i2c_algo = {
 static int xlp9xx_i2c_get_frequency(struct platform_device *pdev,
 				    struct xlp9xx_i2c_dev *priv)
 {
-	struct device_node *np = pdev->dev.of_node;
 	u32 freq;
 	int err;
 
-	err = of_property_read_u32(np, "clock-frequency", &freq);
+	err = device_property_read_u32(&pdev->dev, "clock-frequency", &freq);
 	if (err) {
 		freq = XLP9XX_I2C_DEFAULT_FREQ;
 		dev_dbg(&pdev->dev, "using default frequency %u\n", freq);
@@ -429,12 +429,21 @@ static const struct of_device_id xlp9xx_i2c_of_match[] = {
 	{ /* sentinel */ },
 };
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xlp9xx_i2c_acpi_ids[] = {
+	{"BRCM9007", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, xlp9xx_i2c_acpi_ids);
+#endif
+
 static struct platform_driver xlp9xx_i2c_driver = {
 	.probe = xlp9xx_i2c_probe,
 	.remove = xlp9xx_i2c_remove,
 	.driver = {
 		.name = "xlp9xx-i2c",
 		.of_match_table = xlp9xx_i2c_of_match,
+		.acpi_match_table = ACPI_PTR(xlp9xx_i2c_acpi_ids),
 	},
 };
 
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 74e5aeaf84f9..da3a02ef4a31 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -27,6 +27,8 @@
    I2C slave support (c) 2014 by Wolfram Sang <wsa@sang-engineering.com>
  */
 
+#define pr_fmt(fmt) "i2c-core: " fmt
+
 #include <dt-bindings/i2c/i2c.h>
 #include <asm/uaccess.h>
 #include <linux/acpi.h>
@@ -493,7 +495,8 @@ acpi_i2c_space_handler(u32 function, acpi_physical_address command,
 		break;
 
 	default:
-		pr_info("protocol(0x%02x) is not supported.\n", accessor_type);
+		dev_warn(&adapter->dev, "protocol 0x%02x not supported for client 0x%02x\n",
+			 accessor_type, client->addr);
 		ret = AE_BAD_PARAMETER;
 		goto err;
 	}
@@ -759,6 +762,47 @@ int i2c_recover_bus(struct i2c_adapter *adap)
 }
 EXPORT_SYMBOL_GPL(i2c_recover_bus);
 
+static void i2c_init_recovery(struct i2c_adapter *adap)
+{
+	struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+	char *err_str;
+
+	if (!bri)
+		return;
+
+	if (!bri->recover_bus) {
+		err_str = "no recover_bus() found";
+		goto err;
+	}
+
+	/* Generic GPIO recovery */
+	if (bri->recover_bus == i2c_generic_gpio_recovery) {
+		if (!gpio_is_valid(bri->scl_gpio)) {
+			err_str = "invalid SCL gpio";
+			goto err;
+		}
+
+		if (gpio_is_valid(bri->sda_gpio))
+			bri->get_sda = get_sda_gpio_value;
+		else
+			bri->get_sda = NULL;
+
+		bri->get_scl = get_scl_gpio_value;
+		bri->set_scl = set_scl_gpio_value;
+	} else if (bri->recover_bus == i2c_generic_scl_recovery) {
+		/* Generic SCL recovery */
+		if (!bri->set_scl || !bri->get_scl) {
+			err_str = "no {get|set}_scl() found";
+			goto err;
+		}
+	}
+
+	return;
+ err:
+	dev_err(&adap->dev, "Not using recovery: %s\n", err_str);
+	adap->bus_recovery_info = NULL;
+}
+
 static int i2c_device_probe(struct device *dev)
 {
 	struct i2c_client	*client = i2c_verify_client(dev);
@@ -1240,6 +1284,47 @@ struct i2c_client *i2c_new_dummy(struct i2c_adapter *adapter, u16 address)
 }
 EXPORT_SYMBOL_GPL(i2c_new_dummy);
 
+/**
+ * i2c_new_secondary_device - Helper to get the instantiated secondary address
+ * and create the associated device
+ * @client: Handle to the primary client
+ * @name: Handle to specify which secondary address to get
+ * @default_addr: Used as a fallback if no secondary address was specified
+ * Context: can sleep
+ *
+ * I2C clients can be composed of multiple I2C slaves bound together in a single
+ * component. The I2C client driver then binds to the master I2C slave and needs
+ * to create I2C dummy clients to communicate with all the other slaves.
+ *
+ * This function creates and returns an I2C dummy client whose I2C address is
+ * retrieved from the platform firmware based on the given slave name. If no
+ * address is specified by the firmware default_addr is used.
+ *
+ * On DT-based platforms the address is retrieved from the "reg" property entry
+ * cell whose "reg-names" value matches the slave name.
+ *
+ * This returns the new i2c client, which should be saved for later use with
+ * i2c_unregister_device(); or NULL to indicate an error.
+ */
+struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
+						const char *name,
+						u16 default_addr)
+{
+	struct device_node *np = client->dev.of_node;
+	u32 addr = default_addr;
+	int i;
+
+	if (np) {
+		i = of_property_match_string(np, "reg-names", name);
+		if (i >= 0)
+			of_property_read_u32_index(np, "reg", i, &addr);
+	}
+
+	dev_dbg(&client->adapter->dev, "Address for %s : 0x%x\n", name, addr);
+	return i2c_new_dummy(client->adapter, addr);
+}
+EXPORT_SYMBOL_GPL(i2c_new_secondary_device);
+
 /* ------------------------------------------------------------------------- */
 
 /* I2C bus adapters -- one roots each I2C or SMBUS segment */
@@ -1608,7 +1693,7 @@ static int __process_new_adapter(struct device_driver *d, void *data)
 
 static int i2c_register_adapter(struct i2c_adapter *adap)
 {
-	int res = 0;
+	int res = -EINVAL;
 
 	/* Can't register until after driver model init */
 	if (WARN_ON(!is_registered)) {
@@ -1617,15 +1702,12 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 	}
 
 	/* Sanity checks */
-	if (unlikely(adap->name[0] == '\0')) {
-		pr_err("i2c-core: Attempt to register an adapter with "
-		       "no name!\n");
-		return -EINVAL;
-	}
-	if (unlikely(!adap->algo)) {
-		pr_err("i2c-core: Attempt to register adapter '%s' with "
-		       "no algo!\n", adap->name);
-		return -EINVAL;
+	if (WARN(!adap->name[0], "i2c adapter has no name"))
+		goto out_list;
+
+	if (!adap->algo) {
+		pr_err("adapter '%s': no algo supplied!\n", adap->name);
+		goto out_list;
 	}
 
 	if (!adap->lock_bus) {
@@ -1647,8 +1729,10 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 	adap->dev.bus = &i2c_bus_type;
 	adap->dev.type = &i2c_adapter_type;
 	res = device_register(&adap->dev);
-	if (res)
+	if (res) {
+		pr_err("adapter '%s': can't register device (%d)\n", adap->name, res);
 		goto out_list;
+	}
 
 	dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
 
@@ -1664,41 +1748,8 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 			 "Failed to create compatibility class link\n");
 #endif
 
-	/* bus recovery specific initialization */
-	if (adap->bus_recovery_info) {
-		struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
-
-		if (!bri->recover_bus) {
-			dev_err(&adap->dev, "No recover_bus() found, not using recovery\n");
-			adap->bus_recovery_info = NULL;
-			goto exit_recovery;
-		}
-
-		/* Generic GPIO recovery */
-		if (bri->recover_bus == i2c_generic_gpio_recovery) {
-			if (!gpio_is_valid(bri->scl_gpio)) {
-				dev_err(&adap->dev, "Invalid SCL gpio, not using recovery\n");
-				adap->bus_recovery_info = NULL;
-				goto exit_recovery;
-			}
+	i2c_init_recovery(adap);
 
-			if (gpio_is_valid(bri->sda_gpio))
-				bri->get_sda = get_sda_gpio_value;
-			else
-				bri->get_sda = NULL;
-
-			bri->get_scl = get_scl_gpio_value;
-			bri->set_scl = set_scl_gpio_value;
-		} else if (bri->recover_bus == i2c_generic_scl_recovery) {
-			/* Generic SCL recovery */
-			if (!bri->set_scl || !bri->get_scl) {
-				dev_err(&adap->dev, "No {get|set}_scl() found, not using recovery\n");
-				adap->bus_recovery_info = NULL;
-			}
-		}
-	}
-
-exit_recovery:
 	/* create pre-declared device nodes */
 	of_i2c_register_devices(adap);
 	acpi_i2c_register_devices(adap);
@@ -1730,13 +1781,12 @@ out_list:
  */
 static int __i2c_add_numbered_adapter(struct i2c_adapter *adap)
 {
-	int	id;
+	int id;
 
 	mutex_lock(&core_lock);
-	id = idr_alloc(&i2c_adapter_idr, adap, adap->nr, adap->nr + 1,
-		       GFP_KERNEL);
+	id = idr_alloc(&i2c_adapter_idr, adap, adap->nr, adap->nr + 1, GFP_KERNEL);
 	mutex_unlock(&core_lock);
-	if (id < 0)
+	if (WARN(id < 0, "couldn't get idr"))
 		return id == -ENOSPC ? -EBUSY : id;
 
 	return i2c_register_adapter(adap);
@@ -1773,7 +1823,7 @@ int i2c_add_adapter(struct i2c_adapter *adapter)
 	id = idr_alloc(&i2c_adapter_idr, adapter,
 		       __i2c_first_dynamic_bus_num, 0, GFP_KERNEL);
 	mutex_unlock(&core_lock);
-	if (id < 0)
+	if (WARN(id < 0, "couldn't get idr"))
 		return id;
 
 	adapter->nr = id;
@@ -1871,8 +1921,7 @@ void i2c_del_adapter(struct i2c_adapter *adap)
 	found = idr_find(&i2c_adapter_idr, adap->nr);
 	mutex_unlock(&core_lock);
 	if (found != adap) {
-		pr_debug("i2c-core: attempting to delete unregistered "
-			 "adapter [%s]\n", adap->name);
+		pr_debug("attempting to delete unregistered adapter [%s]\n", adap->name);
 		return;
 	}
 
@@ -2032,7 +2081,7 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
 	if (res)
 		return res;
 
-	pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name);
+	pr_debug("driver [%s] registered\n", driver->driver.name);
 
 	INIT_LIST_HEAD(&driver->clients);
 	/* Walk the adapters that are already present */
@@ -2059,7 +2108,7 @@ void i2c_del_driver(struct i2c_driver *driver)
 	i2c_for_each_dev(driver, __process_removed_driver);
 
 	driver_unregister(&driver->driver);
-	pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name);
+	pr_debug("driver [%s] unregistered\n", driver->driver.name);
 }
 EXPORT_SYMBOL(i2c_del_driver);
 
@@ -2150,8 +2199,8 @@ static int of_i2c_notify(struct notifier_block *nb, unsigned long action,
 		put_device(&adap->dev);
 
 		if (IS_ERR(client)) {
-			pr_err("%s: failed to create for '%s'\n",
-					__func__, rd->dn->full_name);
+			dev_err(&adap->dev, "failed to create client for '%s'\n",
+				 rd->dn->full_name);
 			return notifier_from_errno(PTR_ERR(client));
 		}
 		break;
@@ -2772,7 +2821,7 @@ static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg)
 	cpec = i2c_smbus_msg_pec(cpec, msg);
 
 	if (rpec != cpec) {
-		pr_debug("i2c-core: Bad PEC 0x%02x vs. 0x%02x\n",
+		pr_debug("Bad PEC 0x%02x vs. 0x%02x\n",
 			rpec, cpec);
 		return -EBADMSG;
 	}
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 6ecfd76270f2..66f323fd3982 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -485,13 +485,8 @@ static int i2cdev_open(struct inode *inode, struct file *file)
 	unsigned int minor = iminor(inode);
 	struct i2c_client *client;
 	struct i2c_adapter *adap;
-	struct i2c_dev *i2c_dev;
-
-	i2c_dev = i2c_dev_get_by_minor(minor);
-	if (!i2c_dev)
-		return -ENODEV;
 
-	adap = i2c_get_adapter(i2c_dev->adap->nr);
+	adap = i2c_get_adapter(minor);
 	if (!adap)
 		return -ENODEV;
 
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index abb55d3e76f3..b0d2679c60d1 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -33,7 +33,8 @@ struct i2c_smbus_alert {
 
 struct alert_data {
 	unsigned short		addr;
-	u8			flag:1;
+	enum i2c_alert_protocol	type;
+	unsigned int		data;
 };
 
 /* If this is the alerting device, notify its driver */
@@ -56,7 +57,7 @@ static int smbus_do_alert(struct device *dev, void *addrp)
 	if (client->dev.driver) {
 		driver = to_i2c_driver(client->dev.driver);
 		if (driver->alert)
-			driver->alert(client, data->flag);
+			driver->alert(client, data->type, data->data);
 		else
 			dev_warn(&client->dev, "no driver alert()!\n");
 	} else
@@ -96,8 +97,9 @@ static void smbus_alert(struct work_struct *work)
 		if (status < 0)
 			break;
 
-		data.flag = status & 1;
+		data.data = status & 1;
 		data.addr = status >> 1;
+		data.type = I2C_PROTOCOL_SMBUS_ALERT;
 
 		if (data.addr == prev_addr) {
 			dev_warn(&ara->dev, "Duplicate SMBALERT# from dev "
@@ -105,7 +107,7 @@ static void smbus_alert(struct work_struct *work)
 			break;
 		}
 		dev_dbg(&ara->dev, "SMBALERT# from dev 0x%02x, flag %d\n",
-			data.addr, data.flag);
+			data.addr, data.data);
 
 		/* Notify driver for the device which issued the alert */
 		device_for_each_child(&ara->adapter->dev, &data,
@@ -239,6 +241,108 @@ int i2c_handle_smbus_alert(struct i2c_client *ara)
 }
 EXPORT_SYMBOL_GPL(i2c_handle_smbus_alert);
 
+static void smbus_host_notify_work(struct work_struct *work)
+{
+	struct alert_data alert;
+	struct i2c_adapter *adapter;
+	unsigned long flags;
+	u16 payload;
+	u8 addr;
+	struct smbus_host_notify *data;
+
+	data = container_of(work, struct smbus_host_notify, work);
+
+	spin_lock_irqsave(&data->lock, flags);
+	payload = data->payload;
+	addr = data->addr;
+	adapter = data->adapter;
+
+	/* clear the pending bit and release the spinlock */
+	data->pending = false;
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	if (!adapter || !addr)
+		return;
+
+	alert.type = I2C_PROTOCOL_SMBUS_HOST_NOTIFY;
+	alert.addr = addr;
+	alert.data = payload;
+
+	device_for_each_child(&adapter->dev, &alert, smbus_do_alert);
+}
+
+/**
+ * i2c_setup_smbus_host_notify - Allocate a new smbus_host_notify for the given
+ * I2C adapter.
+ * @adapter: the adapter we want to associate a Host Notify function
+ *
+ * Returns a struct smbus_host_notify pointer on success, and NULL on failure.
+ * The resulting smbus_host_notify must not be freed afterwards, it is a
+ * managed resource already.
+ */
+struct smbus_host_notify *i2c_setup_smbus_host_notify(struct i2c_adapter *adap)
+{
+	struct smbus_host_notify *host_notify;
+
+	host_notify = devm_kzalloc(&adap->dev, sizeof(struct smbus_host_notify),
+				   GFP_KERNEL);
+	if (!host_notify)
+		return NULL;
+
+	host_notify->adapter = adap;
+
+	spin_lock_init(&host_notify->lock);
+	INIT_WORK(&host_notify->work, smbus_host_notify_work);
+
+	return host_notify;
+}
+EXPORT_SYMBOL_GPL(i2c_setup_smbus_host_notify);
+
+/**
+ * i2c_handle_smbus_host_notify - Forward a Host Notify event to the correct
+ * I2C client.
+ * @host_notify: the struct host_notify attached to the relevant adapter
+ * @addr: the I2C address of the notifying device
+ * @data: the payload of the notification
+ * Context: can't sleep
+ *
+ * Helper function to be called from an I2C bus driver's interrupt
+ * handler. It will schedule the Host Notify work, in turn calling the
+ * corresponding I2C device driver's alert function.
+ *
+ * host_notify should be a valid pointer previously returned by
+ * i2c_setup_smbus_host_notify().
+ */
+int i2c_handle_smbus_host_notify(struct smbus_host_notify *host_notify,
+				 unsigned short addr, unsigned int data)
+{
+	unsigned long flags;
+	struct i2c_adapter *adapter;
+
+	if (!host_notify || !host_notify->adapter)
+		return -EINVAL;
+
+	adapter = host_notify->adapter;
+
+	spin_lock_irqsave(&host_notify->lock, flags);
+
+	if (host_notify->pending) {
+		spin_unlock_irqrestore(&host_notify->lock, flags);
+		dev_warn(&adapter->dev, "Host Notify already scheduled.\n");
+		return -EBUSY;
+	}
+
+	host_notify->payload = data;
+	host_notify->addr = addr;
+
+	/* Mark that there is a pending notification and release the lock */
+	host_notify->pending = true;
+	spin_unlock_irqrestore(&host_notify->lock, flags);
+
+	return schedule_work(&host_notify->work);
+}
+EXPORT_SYMBOL_GPL(i2c_handle_smbus_host_notify);
+
 module_i2c_driver(smbalert_driver);
 
 MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");